www.fine-tek.

com

Ultrasonic Level Transmitter

INTRODUCTION

The ultrasonic level transmitter is a non-contact, COMPACT DESIGN

low-cost and easy-to-install measuring device. It Compact size: equipped with 4 push buttons,
can be applied to most industrial applications for Multi-parameters modes and a LCD display.
liquids. Most important aspect of is that it is easy-
to-install and low maintenance due to no moving USER FRIENDLY OPERATION
parts. Can be configured for Imperial or Metric system
units.

WORKING PRINCIPLE RAPID RESPONSE

It can detect level moving up to 10m/min making it
During operation, the device emits a wave to the
one of the industry's quickest.
medium to be measured. The wave reflects off the
surface and moves back to the device where a
transducer calculates the distance. The distance is
EXTENSIVE APPLICATIONS
The PP、EPOXY and PVDF transducer is ideal for
based on the time interval between transmission
use in corrosive applications.
and reception of the wave. D= (334.1+0.6t) x T/2,
where the D = the transmission distance; t =
temperature; and T= transmission time.
FALSE ECHO
Selectable FER function which enables the
instrument to identify obstructions within the path of
With 4~20mA output, it can be connected to the the ultrasonic beam, memorizes their position
PLC,DSC and SCADA systems. In addition, it is andignores them during the measuring process.
also equipped with exclusive PULSE and AGC
(Auto Gain Control) echo tracking technology to
ensure accuracy and precision even in the
harshest environments.

FEATURES
2 4~20mA 2 wire output (Fully isolated) with HART
2 IP65 protection casing(Stantard), IP66(Remote) B
2 Transducer material: PP、EPOXY and PVDF D
2 False echo detection
2 Internal temperature compensation.
2 Not affected by liquid temperature, S.G, viscosity
F
H B = Blanking distance

D = Distance from transducer

L to material surface

H = Height in silo

MAIN FUNCTIONS
2 Level measurement
2 Object distance measurement

1
APPLICATIONS

1. Water or waste water treatment equipment: 3. Chemicals: paints, carbons, water, crude oil,
pumps, open channels, dams and wells. epoxy resin, lime slurry and wax.
2. Edible-oils, sauces and beverages. 4. Diesel, Petrochemicals, alchohols, solvents etc.

Up to 300M 4~20mA
PC or PLC
PM

Meter

PB/PM
panel meter
Liquids
Recorder
Relay output Hi. Alarm
RS232
RS485
Lo. Alarm
DC24V

Liquid measurement Silo with rotational aiming kit

2
SPECIFICATIONS(Stantard type)

Model EAX3000-A EAX3000-B

Ultrasonic frequency 50kHz
External dimensions Dia. 93 x 110mm
Rated power source 24VDC±10%
Max. power consumption 0.6W 3W
Output current 4-20mA +/- 0.02mA DC
Upper and lower limit alarm output
Relay Output None switches(NPN open collector)

RS-485 Output None Yes

Measurement range 0.25 - 7.5m 0.3 - 10m
Measurement object Liquid Liquid/solid
Beam angle 14 deg (-6dB) / 10 deg (-3dB)
Memory backup EEPROM FERAM
Display Graphic LCD (128x64dot)
Setting Key operation
Resolution 1mm
Temperature
-20~+70 °C, +/- 2 °C
compensation sensor
Measurement accuracy +/- 0.25% of F.S.
Installation screw G2 (2"PF)
Transducer Transducer A: PP (Polypropylene)
Housing structure IP65(Without lid: IP20)
Weight 350g
Standard EN61326-1: 2013
Ambient temperature -20~+70°C
Ambient humidity Max. 80%RH(at 31°C )
Storage temperature -30~ +80°C
Length of distribution cable: 10m
Distribution cable Detachable waterproof connector
2 wires x 0.75mm2

3
SPECIFICATIONS(Remote type)

Model EAX30400-C
Number of channels 1 or 2
Frequency 10 - 60kHz
Measurement object Liquid and powder
Measurement range 0.3 – 20m
Measurement resolution 1mm
Measurement accuracy +/- 0.25% F.S.
Operation temperature -20 - +70 °C
Display LCD display with backlight
Current output 4-20mA output
Contact output Relay output: 4 points * 2 lines
Signal input/output RS232, RS485 (PROFIBUS (Option))
Power source 100 – 240 VAC +/- 15%10VA

Dimensions(mm) Main unit: 175.7(W) * 84(D) * 236.7(H)

Transducer B: Dia.84*60 / Transducer C: Dia.98*57
Main unit: 1.8kg
Weight
Transducer B: 500g / Transducer C: 860g
Installation Main unit: Wall mount
(Former JIS standard) Transducer B: Screw mount R1(1"PT) Transducer C: Screw mount: G1(1"PF)
Sensor material Transducer B: Epoxy (Sensor surface) and PP (Housing) Transducer C: PVDF
Enclosure Main unit: IP66 equivalent / Sensor: IP66 equivalent
Sensor cable Dia. 7 * 5m

4
INSTALLATION

2-wires (power supplied by panel meter) The ultrasonic transducer is mounted to the flange
of the extension nozzle of the tank. Please refer to
+24V
the instruction below:
Length for dead band:
Dead band has to be 150mm over extension nozzle .
FineTek PB Meter
Dead band needs to be set as 500mm if extension
nozzle is shorter than 500mm.
+24V
GND Extension length:
4~20mA Vin
Iin
Please refer to below table and choose the suitable
Com probe

Flange Diameter of extension Diameter of extension

size nozzle (f)Min nozzle (Max)

3" 75mm 300mm

2-wires power supply (external) 4" 100mm 300mm

DC24V
6" 150mm 400mm
Power Supply
8" 200mm 600mm
FineTek PI Meter
F G 12" 300mm 600mm
+24V

Iin
Com

L: Extension nozzle

H: Bin High

4-wire (PLC)
+24V

PLC

+24V
GND

Vin
Iin
Com

5
CAUTION BEFORE INSTALLATION

Keep the transducer perpendicular to the liquid The transducer should not be mounted too close to
surface. the tank wall to avoid interference.

X X

A pipe surrounding the detection path along the Do not mount the device close to the tank wall.
ultrasonic wave from emitting to receiving is
Recommended. Installation can prevent false
signals caused by turbulence and foam when an
agitator is present. When the pipe is installed, a
vent hole is required to balance the pressure
difference between the inside and outside of
the pipe...

Vent hole

X
X
Mount the transducer away from the inlet to avoid
interference with the medium.

6
DIMENSIONS

Standand type (Unit:mm)

f93

70

110

40

f56
G2(PF2)

Remoto type

152.7 84

80

236.7 236.7

100
. 2
f4
6-

175.7 70

Transducer: B 1"PT
f7

Wiring

PP

Transducer: C 1"PF
f7

Wiring

PVDF

7
ORDERING INFORMATION

Ordering information 05 06 09 10 11 12 13 14 15 16

EAX 3 99 0 0 -9 9999999

05 06 Model
00: Stantard type
04: Remote type

09 Measuring distance
A: 0.25~7.5m (Stantard type)
B: 0.3~10m (Stantard type)
C: 0.3~20m (Remote type)

10 Transducer
A: PP(Stantard type)
B: Sensor surfuce: Epoxy, Housing: PP (Remote type)
C: PVDF (Remote type)

Connection
11 12 13 14 15 16

AA: JIS A8: 1" 01: PT male

B2: 2" 03: PF male

PS: Transducer A: AAB203

Transducer B: AAA801
Transducer C: AAA803
 Global Network
Germany
China

Taiwan U.S.

Singapore

Indonesia

Head Quarter North America Europe

Taiwan California, U.S. Germany
FineTek Co., Ltd. - Taipei Head Quarter Aplus Finetek Sensor Inc. - US Office FineTek GmbH - Germany Office
No.16, Tzuchiang St., Tucheng Industrial Park 355 S. Lemon Ave, Suite D Bei den Kämpen 26
New Taipei City 236, Taiwan Walnut, CA 91789 21220 Seevetal-Ramelsloh, Germany
TEL: 886-2-2269-6789 TEL: 1 909 598 2488 TEL: +49-(0)4185-8083-12
FAX: 886-2-2268-6682 FAX: 1 909 598 3188 FAX: +49-(0)4185-8083-80
EMAIL: [email protected] EMAIL: [email protected] EMAIL: [email protected]

Asia Mütec Instruments GmbH - Germany Office

China Bei den Kämpen 26
21220 Seevetal-Ramelsloh, Germany
Fine automation Co., Ltd. - Shanghai Factory
TEL: +49-(0)4185-8083-0
No.451 DuHui Rd, MinHang District, Shanghai,
FAX: +49-(0)4185-8083-80
China 201109
EMAIL: [email protected]
TEL: 86-21-6490-7260
EMAIL: [email protected]

Singapore
FineTek Pte Ltd. - Singapore Office
37 Kaki Bukit Place, Level 4 Singapore 416215
TEL: 65-6452-6340
EMAIL: [email protected]

Indonesia
PT. FineTek Automation Indonesia - Indonesia Office
PERGUDANGAN TUNAS BITUNG
JL. Raya Serang KM. 13,8, Blok C3 No. 12&15, Bitung Cikupa, Distributor:
Tangerang 15710
TEL: 62 (021)-2958-1688
EMAIL: [email protected]

08-EAXEP-052322