Detailed Parts for

PV300/400 Series Pumps

TM

604 PROGRESS DRIVE, HARTLAND, WI 53029

USA
Phone: (262) 367-4299 FAX: (262) 367-5645
URL: www.hartmanncontrols.com E-mail: [email protected]
Pump Assembly
1. Compensator Assembly
2. Pipe Plug
3. Spring Seat
4. Starter Spring
5. Piston Spring
6. Case Dowel (Obsolete)
7. Piston Assembly
8. Control Piston
9. Snap Ring
10. Hold Down Plate
11. Thrust Plate
12. Reaction Plate
13. Snap Ring
14. Bearing Cup
15. Snap Ring
16. Shaft Seal
17. Snap Ring
18. Key
19. Trunnion Nut
20. O-Ring
21. Needle Bearing
22. Trunnion Thrust Washer
23. Brass Washer
24. Housing Screw
25. Drive Shaft
26. Drive Cover
27. Bearing Cone
28. Lead Plug
29. Pump Null Screw
30. Pipe Plug
31. Housing O-Ring
32. Bronze Rotor
33. Control Piston
34. Valve Plate
35. Dowel Pin
36. Needle Bearing
37. Spacer
38. O-Ring
39. Volume Control Plug
40. Port End Cover
41. Pipe Plug (Obsolete
 Description Part Number or Kit
Ref # 300 Series 400 Series
PRESSURE COMPENSATOR ASSEMBLY,
31800-2
HIGH RATING (3000 psi)
1
PRESSURE COMPENSATOR ASSEMBLY,
31740-2
LOW RATING (2000 psi)
PIPE PLUG (3) 2 25080
SPRING SEAT (7) 3 Kit 34380 Kit 34381
STARTER SPRING 4 Kit 35640
PISTON SPRING (7) 5 Kit 34380 Kit 34381
CASE DOWEL PIN, OBSOLETE 6 32290-13
PISTON ASSEMBLY (7) 7 Kit 34380 Kit 34381
ON-STROKE CONTROL PISTON 8 Kit 35640
SNAP RING FOR HOLD DOWN PLATE 9 Kit 34380 Kit 34381
HOLD DOWN PLATE 10 Kit 34380 Kit 34381
THRUST PLATE 11 Kit 34380 Kit 34381
REACTION PLATE 12 Kit 34382-1
SNAP RING FOR THE BORE 13 Kit 53432
BEARING CUP (2) 14 Kit 53432
SNAP RING FOR THE SHAFT 15 Kit 53432
SHAFT SEALS
SHAFT SEAL (1-1/8” Φ SHAFT), VITON Kit 34290-2
16
SHAFT SEAL (1-1/4” Φ SHAFT), VITON Kit 34290-2

SNAP RING FOR SEAL SIDE 17 Kit 53432

KEY (1/4” SQ. X 1.25”, 1-1/8” Φ SHAFT) 25075
18
KEY (5/16” SQ. X 1.12”, 1-1/4” Φ SHAFT) 32353
TRUNNION NUT (2) 19 28563
O-RING (2) 20 Kit 34290-2
 Description Part Number
Ref # 300 Series 400 Series
NEEDLE BEARING (2) 21 Kit 53432 or Kit 51100
TRUNNION THRUST WASHER (2) 22 Kit 34382-1
BRASS WASHER (8) 23 16646
HOUSING SCREW (8) 24 16645
DRIVE SHAFTS
DRIVE SHAFT 1-1/8” Φ, STANDARD 28562
DRIVE SHAFT 1-1/8” Φ, WATERBASE 37137
DRIVE SHAFT 1-1/4” Φ SAE-C KEYED,
38755
STANDARD
DRIVE SHAFT 1-1/4” Φ SAE-C KEYED,
51257
WATERBASE
DRIVE SHAFT 1-1/4” Φ SAE-C SPLINED, 25 29594
STANDARD
DRIVE SHAFT 1-1/4” Φ SAE-C SPLINED,
38062
WATERBASE
DRIVE SHAFT 1-1/8” Φ, SPECIAL
29501
(TAPERED & THREADED)
DRIVE SHAFT 1-1/4” Φ, SPECIAL
32352
(LONG KEY; 1-1/2” LONGER)
DRIVE COVERS
DRIVE COVER, DUCTILE IRON, CW 28574
DRIVE COVER, DUCTILE IRON, CCW 26 28574-L
DRIVE COVER, WATERBASE 37738

BEARING CONE (2) 27 Kit 53432

LEAD PLUG 28 27615
POSITIVE-STOP SET SCREW 29 27614
PIPE PLUG 30 17367
 Description Part Number
Ref # 300 Series 400 Series
0-RING 31 Kit 34290-2
BRONZE ROTOR 32 Kit 34380 Kit 34381
VOLUME CONTROL PISTON 33 16614
VALVE PLATE, CW 32028
VALVE PLATE, CCW 34 32029
VALVE PLATE, BI-DIRECTIONAL 31991
DOWEL PIN 35 16647
NEEDLE BEARING (REAR) 36 Kit 53432
SPACER (XX DEFINES VOLUMETRICS) 37 35573 - XX
O-RING 38 Kit 34290-2
VOLUME CONTROL PLUG SUB-ASSEMBLY 39 51101
PORT END COVERS
PEC, CW, STANDARD, 320 & 420, 21, 24, 25 28539

PEC, CCW, STANDARD, 320 & 420, 21, 24, 25 29157

PEC, CW, SAE # 24 PORTS, 320 & 420, 21, 24,

29158
25
PEC, CCW, SAE # 24 PORTS, 320 & 420, 21, 24,
29159
25
PEC, CW, WATERBASE, 320 & 420 37138
40
PEC, CCW, WATERBASE, 320 & 420 37453
PEC, MOTORS, PF, 300 & 400 28541
PEC, BI-DIRECTIONAL, 330 & 430 29372
PEC, CW OR BI-DIRECTIONAL, 340 & 440 29373
PEC, CCW, 340 & 440 29374
PEC, BI-DIRECTIONAL, 340 & 440 29375
PEC, BI-DIRECTIONAL, SAE # 24, 340 & 440 33030
 Description Part Number
PORT END COVERS Ref # 300 Series 400 Series
PEC, CW, SPECIAL, 440 51204
PEC, CW, 310 & 410 36532
PEC, CCW, 310 & 410 40 36531
PEC, CW, SAE # 24 PORTS, 310 & 410 37833
PEC, CCW, SAE # 24 PORTS, 310 & 410 51126

PIPE PLUG (OBSOLETE) 41 16639

VOLUME/DISPLACEMENT CONTROLS
NON-ADJUSTABLE CONTROL 51101
ADJUSTABLE CONTROL, SHORT SCREW 51102
ADJUSTABLE CONTROL, LONG SCREW 51455
CONTROL LIMIT ASSEMBLY, 340 & 440
51148
[SEE NOTE #1]
CONTROL LIMIT ASSEMBLY, 330 & 430 51128
CONTROL PISTON 51129
CONTROLS 300 Series 400 Series
HANDWHEEL VOLUME CONTROL, 310 & 410 28585
PRESSURE COMPENSATOR, 320 & 420 31800-2
LOW PRESSURE COMPENSATOR, 320 & 420 31740-2
HANDWHEEL PRESSURE COMPENSATOR, 321 &
51103
421
HI-LO VOLUME CONTROL, 320 & 420, 24, 30 31765-1 or -2
REMOTE PRESSURE COMPENSATOR,
33926
324 & 424
DIFFERENTIAL PRESSURE ASSEMBLY,
34548
325 & 425
 Part Number Description Part Number
VARIOUS PARTS
EXTENDED TRUNNION NUT SUB-ASSEMBLY 51106
SAE C MOUNT 33654
SAE C MOUNT, WATERBASE 39092
FOOT MOUNT 33269

NOTE #1: USE CONTROL PISTON 19021 AND INSERT 23311 (2 EACH)