Pneufit Push-in Tube Fittings

Inch
1⁄ 8" – 1⁄ 2" O/D tube

l Very compact units

l Easy tube insertion for rapid assembly of pneumatic

circuits

l Positive tube anchorage

l All taper threads pre-coated with non-PTFE based

sealant

l Straight Adaptors feature internal hexagon for Allen

key

l Silicone free O-rings

Technical Data Ordering Information

Medium: To order, quote appropriate product number
Compressed air from the tables on the following pages.
(For other media please consult Technical Department)
Operating Pressure:
Vacuum – 18 bar
(Dependent upon operating specification of tubing) Pneufit's new product numbering system is
designed to make identification and selection
Vacuum: = –750mm of Hg i.e. 98%
simple:
Operating Temperature:
–20°C* to +80°C
(-20°C to +200°C with Viton O-ring - add suffix V) 1 2
Tube Sizes
1⁄ 8”, 5⁄ 32”, 3⁄ 16”, 1⁄ 4”, 5⁄ 16”, 3⁄ 8”, 1⁄ 2” O/D
Series Shape Thread Size/
Number Type Tube Size
Tubing Types: Tube Size/
Nylon 11 or 12, Polyurethane and other plasticised or unplasticised Thread Size
tubing which conforms to the tolerances specified in BS 5409, Part
1, 1976, light and normal duty, DIN 73378, DIN 74234, NFE 49-100

Materials
Nickel plated brass or glass filled nylon for body
Nickel plated brass for collet.
Silicone free nitrile rubber 'O' ring (Viton optional).
Plastic sealing washer (parallel threads)
Non - PTFE thread sealant.

Note that dimensions in this section are in Imperial units unless otherwise stated. Warning: The push-in tube fittings in this section must not be
used in vehicle air braking systems.
For push-in fittings suited to these applications please consult
our Technical Service for details.

Our policy is one of continuous research and development. We therefore reserve the right
01/97 to amend, without notice, the specifications given in this document. N/UK 9.3.010.01
 Pneufit Push-In Tube Fittings Inch

Straight Unions, Connectors and Adaptors

UNION UNION DOUBLE MALE UNION BULKHEAD UNION MALE CONNECTOR MALE CONNECTOR MALE CONNECTOR
Inch tube to MM Tube (BRASS) Inch O/D Tube to BSPT MM O/D Tube to NPTF
Thread [Male] Thread
12020 10020/10037 12022 12029 12425 10125/12125 10425/12425

Page 9.3.010.03 Page 9.3.010.09 Page 9.3.010.03 Page 9.3.010.04 Page 9.3.010.05 Page 9.3.010.05 Page 9.3.010.05

FEMALE CONNECTOR STEM ADAPTOR STEM ADAPTOR STEM ADAPTOR BARB ADAPTOR
Inch O/D Stem to BSPT MM O/D Stem to NPTF
Thread [Male] Thread

12426 12415 10115/12115 10415/12415 12019

Page 9.3.010.04 Page 9.3.010.04 Page 9.3.010.04 Page 9.3.010.09 Page 9.3.010.03

Elbow Unions and Connectors and Banjos

UNION ELBOW MALE ELBOW SWIVEL MALE ELBOW EXTENDED SWIVEL MALE SWIVEL FEMALE ELBOW BANJO ELBOW FIXED ELBOW ADAPTOR
ELBOW

12040 12445 12477 12454 12448 12R51 12145

Page 9.3.010.06 Page 9.3.010.07 Page 9.3.010.06 Page 9.3.010.07 Page 9.3.010.06 Page 9.3.010.08 Page 9.3.010.06

Tee Unions, Connectors and Banjos, ‘Y’ Unions and Connectors

UNION TEE SWIVEL MALE BRANCH SWIVEL MALE RUN TEE ISO G BANJO TEE PARALLEL UNION Y SWIVEL TEE ADAPTOR SWIVEL SIDE TEE
TEE CONNECTOR ADAPTOR
(Thermoplastic)
12060 12467 12468 12R71 12082 12167 12168
10167 10168

Page 9.3.010.07 Page 9.3.010.08 Page 9.3.010.08 Page 9.3.010.09 Page 9.3.010.08 Page 9.3.010.07 Page 9.3.010.07
PARALLEL MALE Y PARALLEL MALE Y PARALLEL MALE Y ELBOW BANJO ELBOW BANJO
CONNECTOR CONNECTOR SWIVEL ASSEMBLY ASSEMBLY
(Plastic) (Plastic)
12084 12084 12488 12VO 12VAO

Page 9.3.010.08 Page 9.3.010.05 Page 9.3.010.09 Page 9.3.010.10 Page 9.3.010.10

Accessories
TUBE END PLUG PLUG MANIFOLD MANIFOLD
EXPANDER/REDUCER (Plastic) O/D tube to O/D tube O/D tube to male NPTF
thread

12023 12004 13004 120D6 124D6

Page 9.3.010.03 Page 9.3.010.04 Page 9.3.010.04 Page 9.3.010.11 Page 9.3.010.11

Our policy is one of continuous research and development. We therefore reserve the right
N/UK 9.3.010.02 to amend, without notice, the specifications given in this document. 01/97
 Pneufit Push-In Tube Fittings Inch

Assembly Details Typical Dimensions A S T V

O/D tube tubing stop
T 1⁄ 8"
Collet 0,09 0,53 0,26
5⁄ 32"(4) 0,11 0,55 0,30

ØS
Tube Stop 3⁄ 16" 0,13 0,59 0,38
1⁄ 4" 0,17 0,61 0,42

A
5⁄ 16"(8) 0,24 0,65 0,51
3⁄ 8" 0,30 0,83 0,59
1⁄ 2" 0,38 0,96 0,71
'O' Ring
Body * Dimensions here and in the individual tables refer to the collet being
in the ‘IN’ position.
† Dimensions here (minimum bore diameter) are common per tube
Method of Assembly size for all Connectors, Elbows and Tees unless otherwise stated.

90º

1. Ensure that the end of the tube 2. Push the tube through the collet 3. Push the tube firmly through the 4. To disconnect, push the tube
is cut square and is free from into the fitting. ‘O’ ring until it bottoms on the tube into the fitting, hold down the collet
burrs. stop then pull back. and withdraw the tube.

Straight Stem Connector 12022 Straight Connector 12020

Product A B L
O/D tube to O/D tube
number O/D
Product A L C
Stem
1⁄ 8"
number O/D
12 022 0100 0,09 1,18
L 5⁄ 32"
Tube
12 022 0200 0,13 1,19 1⁄ 8"
3⁄ 16" L 12 020 0100 1,15 0,35
12 022 0300 0,16 1,31
ØA

12 020 0200 5⁄ 32" 1,17 0,39

12 022 0400 1⁄ 4" 0,24 1,34
12 020 0300 3⁄ 16" 1,26 0,43
ØB

ØA

ØC
12 022 0500 5⁄ 16" 0,30 1,42
12 020 0400 1⁄ 4" 1,28 0,47
12 022 0600 3⁄ 8" 0,38 1,77
12 020 0500 5⁄ 16" 1,35 0,55
12 022 0700 1⁄ 2" 0,45 2,05
12 020 0600 3⁄ 8" 1,71 0,67
12 020 0700 1⁄ 2" 1,98 0,81

Tube End Expander/Reducer 12023 Stem Tailpiece Adaptor 12019

tube stem to O/D tube O/D tube stem to hose bore
Reducing
Product A B L C
ØA

number O/D O/D Product A B L D

Tube Stem number O/D Hose (ref)
12 023 0201 1⁄ 8" 5⁄ 32" 1,22 0,35 Stem Bore
L 12 023 0401 1⁄ 8" 1⁄ 4" 1,30 0,35 12 019 0101 1⁄ 8" 1⁄ 8" 0,17 1,34
5⁄ 32" 1⁄ 4" 1/8", 5/32", 1/4" 12 019 0201 5⁄ 32" 1⁄ 8" 0,17 1,35
12 023 0402 1,34 0,39
5⁄ 32" 5⁄ 16" 12 019 0403 1⁄ 4" 3⁄ 16" 0,24 1,43
12 023 0502 1,22 0,39
5⁄ 32" 3⁄ 8" 12 019 0504 5⁄ 16" 1⁄ 4" 0,31 1,47
ØC

ØB
ØA

12 023 0602 1,22 0,47

3⁄ 16" 1⁄ 4" 12 019 0605 3⁄ 8" 5⁄ 16" 0,37 1,70
12 023 0403 1,38 0,43 L
1⁄ 2" 3⁄ 8"
ØD
ØB

12 019 0706 0,47 1,84

ØA

12 023 0503 3⁄ 16" 5⁄ 16" 1,30 0,43

12 023 0504 1⁄ 4" 5⁄ 16" 1,46 0,47
12 023 0604 1⁄ 4" 3⁄ 8" 1,50 0,47
12 023 0704 1⁄ 4" 1⁄ 2" 1,38 0,55
12 023 0605 5⁄ 16" 3⁄ 8" 1,69 0,55 5/16", 3/8", 1/2"
12 023 0705 5⁄ 16" 1⁄ 2" 1,65 0,55
12 023 0706 3⁄ 8" 1⁄ 2" 1,97 0,67
Expanding
Product A B L C
number O/D O/D
Tube Stem
12 023 0104 1⁄ 4" 1⁄ 8" 1,34 0,47
12 023 0204 1⁄ 4" 5⁄ 32" 1,38 0,47
12 023 0304 1⁄ 4" 3⁄ 16" 1,40 0,47

Our policy is one of continuous research and development. We therefore reserve the right
01/97 to amend, without notice, the specifications given in this document. N/UK 9.3.010.03
 Pneufit Push-In Tube Fittings Inch

Bulkhead Connector 12029

O/D tube to O/D tube

L Product A B E D L
number O/D Metric A/F
B
Tube Thread
12 029 0100 1⁄ 8" M10 x 1.0 0,55 0,47 1,15
5⁄ 32"
ØA
ØA

12 029 0200 M10 x 1.0 0,55 0,47 1,18

12 029 0300 3⁄ 16" M12 x 1.0 0,67 0,55 1,26
12 029 0400 1⁄ 4" M14 x 1.5 0,75 0,59 1,38
D 5⁄ 16"
12 029 0500 M16 x 1.5 0,87 0,63 1,42
E 12 029 0600 3⁄ 8" M20 x 1.5 1,06 0,55 1,69
12 029 0700 1⁄ 2" M24 x 1.5 1,18 0,59 1,97

Plug 12004 Plug 13004

Product A B L Product A B L
L number O/D Ø L number O/D Ø
Stem Stem
12 004 0100 1⁄ 8" 0,34 1,02 13 004 0200 5⁄ 32" 0,38 1,04
12 004 0200 5⁄ 32" 0,38 1,04 13 004 0300 3⁄ 16" 0,41 1,10
ØA

ØB

ØA

ØB
12 004 0300 3⁄ 16" 0,42 1,10 13 004 0400 1⁄ 4" 0,46 1,12
12 004 0400 1⁄ 4" 0,46 1,12 13 004 0500 5⁄ 16" 0,50 1,16
12 004 0500 5⁄ 16" 0,50 1,16 13 004 0600 3⁄ 8" 0,61 1,34
12 004 0600 3⁄ 8" 0,61 1,34 13 004 0700 1⁄ 2" 0,65 1,48
12 004 0700 1⁄ 2" 0,66 1,48 Plastic
Nickel plated brass

Stem Adaptor 10115/12115 Straight Stem Adaptor 12415

Inch O/D Stem to BSPT Thread O/D tube stem to taper NPTF thread

Product A B C G L S Product A B C G L S
number O/D ISO R A/F number O/D NPTF A/F
L Stem Thread L Stem Thread
5⁄ 32" 1⁄ 8" 5⁄ 32"
10 115 0418 0,39 0,30 1,18 0,08 12 415 0210 10-32 5⁄ 16" 0,20 1,14 0,08
G G
ØS

10 115 0428 5⁄ 32" 1⁄ 4" 0,55 0,44 1,32 0,08 5⁄ 32" 1⁄ 8" 7⁄ 16" 0,37 1,25 0,08
12 415 0218
S

12 115 0418 1⁄ 4" 1⁄ 8" 0,47 0,30 1,26 0,16 5⁄ 32" 1⁄ 4" 9⁄ 16" 0,56 1,45 0,08
12 415 0228
ØA

ØA

1⁄ 4" 1⁄ 4" 1⁄ 4" 1⁄ 8" 7⁄ 16" 0,37 1,33 0,16

B

12 115 0428 0,55 0,44 1,40 0,16 12 415 0418

B

10 115 0818 5⁄ 16" 1⁄ 8" 0,55 0,30 1,30 0,20 1⁄ 4" 1⁄ 4" 9⁄ 16" 0,56 1,52 0,16
12 415 0428
10 115 0828 5⁄ 16" 1⁄ 4" 0,55 0,44 1,44 0,20 5⁄ 16" 1⁄ 8" 7⁄ 16" 0,37 1,37 0,19
12 415 0518
C 12 115 0628 3⁄ 8" 1⁄ 4" 0,59 0,44 1,57 0,30 C 5⁄ 16" 1⁄ 4" 9⁄ 16" 0,56 1,56 0,19
12 415 0528
12 115 0638 3⁄ 8" 3⁄ 8" 0,75 0,50 1,77 0,30 3⁄ 8" 1⁄ 4" 9⁄ 16" 0,56 1,74 0,30
12 415 0628
12 115 0738 1⁄ 2" 3⁄ 8" 0,75 0,50 1,89 0,39 3⁄ 8" 3⁄ 8" 11⁄ 16" 0,56 1,82 0,30
12 415 0638
12 115 0748 1⁄ 2" 1⁄ 2" 0,87 0,63 2,03 0,39 1⁄ 2" 3⁄ 8" 11⁄ 16" 0,56 1,95 0,35
12 415 0738
12 415 0748 1⁄ 2" 1⁄ 2" 7⁄ 8" 0,75 2,15 0,35

Our policy is one of continuous research and development. We therefore reserve the right
N/UK 9.3.010.04 to amend, without notice, the specifications given in this document. 01/97
 Pneufit Push-In Tube Fittings Inch

Straight Adaptor 10425/12425 Straight Adaptor 10125/12125

MM O/D Tube to NPTF (Male) Thread Inch O/D Tube to BSPT Thread
Product A B C G L
Product A B C G L S number O/D ISO R A/F
number O/D Thread A/F Hex Tube Thread
L L
(mm) 12 125 0118 1⁄ 8" 1⁄ 8" 0,39 0,30 0,79
G 12 425 0210 4 10⁄ 32"UNF ,350 0,20 0,85 3⁄ 32" G 1⁄ 8" 1⁄ 4"
12 125 0128 0,55 0,44 0,89

S
S

12 425 0218 4 1⁄ 8" 7⁄ 16" 0,37 0,89 1⁄ 8" 10 125 0418 5⁄ 32" 1⁄ 8" 0,39 0,30 0,81
12 425 0228 4 1⁄ 4" 9⁄ 16" 0,56 1,04 1⁄ 8" 10 125 0428 5⁄ 32" 1⁄ 4" 0,55 0,44 0,91

ØA
ØA

B
B

10 425 0518 5 1⁄ 8" 7⁄ 16" 0,37 0,96 5⁄ 32" 12 125 0418 1⁄ 4" 1⁄ 8" 0,43 0,30 0,91
10 425 0528 5 1⁄ 4" 9⁄ 16" 0,56 1,04 5⁄ 32" 12 125 0428 1⁄ 4" 1⁄ 4" 0,55 0,44 0,99
10 425 0610 6 10⁄ 32"UNF 0,43Ø 0,20 0,94 3⁄ 32" 12 125 0438 1⁄ 4" 3⁄ 8" 0,67 0,50 1,01
C 10 425 0618 6 1⁄ 8" 7⁄ 16" 0,37 0,98 5⁄ 32" C 5⁄ 16" 1⁄ 8"
10 125 0818 0,51 0,30 1,05
10 425 0628 6 1⁄ 4" 9⁄ 16" 0,56 1,11 5⁄ 32" 10 125 0828 5⁄ 16" 1⁄ 4" 0,55 0,44 1,11
10 425 0638 6 3⁄ 8" 11⁄ 16" 0,56 1,07 5⁄ 32" 10 125 0838 5⁄ 16" 3⁄ 8" 0,67 0,50 1,07
12 425 0518 8 1⁄ 8" 1⁄ 2" 0,37 1,12 3⁄ 16" 12 125 0618 3⁄ 8" 1⁄ 8" 0,67 0,30 1,25
12 425 0528 8 1⁄ 4" 9⁄ 16" 0,56 1,23 1⁄ 4" 12 125 0628 3⁄ 8" 1⁄ 4" 0,67 0,44 1,35
12 425 0538 8 3⁄ 8" 11⁄ 16" 0,56 1,13 1⁄ 4" 12 125 0638 3⁄ 8" 3⁄ 8" 0,67 0,50 1,35
10 425 1018 10 1⁄ 8" 11⁄ 16" 0,37 1,32 3⁄ 16" 12 125 0648 3⁄ 8" 1⁄ 2" 0,87 0,63 1,33
10 425 1028 10 1⁄ 4" 11⁄ 16" 0,56 1,47 9⁄ 32" 12 125 0728 1⁄ 2" 1⁄ 4" 0,87 0,44 1,54
10 425 1038 10 3⁄ 8" 11⁄ 16" 0,56 1,41 5⁄ 16" 12 125 0738 1⁄ 2" 3⁄ 8" 0,87 0,50 1,56
10 425 1048 10 1⁄ 2" 7⁄ 8" 0,75 1,45 5⁄ 16" 12 125 0748 1⁄ 2" 1⁄ 2" 0,87 0,63 1,58
10 425 1228 12 1⁄ 4" 7⁄ 8" 0,56 1,67 9⁄ 32"
10 425 1238 12 3⁄ 8" 7⁄ 8" 0,56 1,63 13⁄ 32"
10 425 1248 12 1⁄ 2" 7⁄ 8" 0,75 1,70 13⁄ 32"

Straight Adaptor 12425

O/D tube to male NPTF taper Product A B C G L S
number O/D NPTF or Hex
Tube UNF Thread
L 12 425 0110 1⁄ 8" 10-32 UNF 0,31 0,20 0,79 3⁄ 32"

12 425 0116 1⁄ 8" 1⁄ 16" 3⁄ 8" 0,37 0,80 3⁄ 32"

S

12 425 0118 1⁄ 8" 1⁄ 8" 7⁄ 16" 0,37 0,67 3⁄ 32"

12 425 0128 1⁄ 8" 1⁄ 4" 9⁄ 16" 0,56 0,95 3⁄ 32"

ØC
ØA

12 425 0210 5⁄ 32" 10-32 UNF 0,35 0,20 0,85 3⁄ 32"

12 425 0218 5⁄ 32" 1⁄ 8" 7⁄ 16" 0,37 0,89 1⁄ 8"

B 12 425 0228 5⁄ 32" 1⁄ 4" 9⁄ 16" 0,56 1,04 1⁄ 8"

10-32 UNF 12 425 0318 3⁄ 16" 1⁄ 8" 7⁄ 16" 0,37 0,96 5⁄ 32"

12 425 0328 3⁄ 16" 1⁄ 4" 9⁄ 16" 0,56 1,04 5⁄ 32"

12 425 0410 1⁄ 4" 10-32 UNF 0,43 0,20 0,94 3⁄ 32"

12 425 0418 1⁄ 4" 1⁄ 8" 7⁄ 16" 0,37 0,98 5⁄ 32"

L
12 425 0428 1⁄ 4" 1⁄ 4" 9⁄ 16" 0,56 1,11 5⁄ 32"
G 1⁄ 4" 3⁄ 8" 11⁄ 16" 5⁄ 32"
12 425 0438 0,56 1,07
S

12 425 0518 5⁄ 16" 1⁄ 8" 1⁄ 2" 0,37 1,12 3⁄ 16"

5⁄ 16" 1⁄ 4" 9⁄ 16" 1⁄ 4"

ØA

12 425 0528 0,56 1,23

B

12 425 0538 5⁄ 16" 3⁄ 8" 11⁄ 16" 0,56 1,13 1⁄ 4"

12 425 0618 3⁄ 8" 1⁄ 8" 11⁄ 16" 0,37 1,32 3⁄ 16"

12 425 0628 3⁄ 8" 1⁄ 4" 11⁄ 16" 0,56 1,47 1⁄ 4"

C
12 425 0638 3⁄ 8" 3⁄ 8" 11⁄ 16" 0,56 1,41 5⁄ 16"

12 425 0648 3⁄ 8" 1⁄ 2" 7⁄ 8" 0,75 1,45 5⁄ 16"

12 425 0728 1⁄ 2" 1⁄ 4" 7⁄ 8" 0,56 1,67 1⁄ 4"

12 425 0738 1⁄ 2" 3⁄ 8" 7⁄ 8" 0,56 1,63 3⁄ 8"

12 425 0748 1⁄ 2" 1⁄ 2" 7⁄ 8" 0,75 1,70 3⁄ 8"

Straight Adaptor 12426 Straight Adaptor 12225/10225

O/D tube to female NPTF thread O/D Tube to Male Metric Thread
L Product A B C L
number O/D NPTF A/F
Tube Thread Product A B C G L
ØA

12 426 0118 1⁄ 8" 1⁄ 8" 9⁄ 16" 1,14 number O/D Thread

B

1⁄ 8" 1⁄ 4" 11⁄ 16"

L
12 426 0128 1,38 Tube
5⁄ 32" 1⁄ 8" 9⁄ 16" G 1⁄ 8"
12 426 0218 1,14 12 225 0105 M5 x 0.8 0,31 0,2 0,78
C 5⁄ 32" 1⁄ 4" 11⁄ 16" 5⁄ 32"
12 426 0228 1,42 10 225 0405 M5 x 0.8 0,35 0,2 0,84
ØC
ØA

12 426 0418 1⁄ 4" 1⁄ 8" 9⁄ 16" 1,19 3⁄ 16"

12 225 0305 M5 x 0.8 0,39 0,2 0,9
12 426 0428 1⁄ 4" 1⁄ 4" 11⁄ 16" 1,46 1⁄ 4"
12 225 0405 M5 x 0.8 0,43 0,2 0,94
12 426 0518 5⁄ 16" 1⁄ 8" 9⁄ 16" 1,23
B
12 426 0528 5⁄ 16" 1⁄ 4" 11⁄ 16" 1,50
12 426 0628 3⁄ 8" 1⁄ 4" 11⁄ 16" 1,66
12 426 0638 3⁄ 8" 3⁄ 8" 7⁄ 8" 1,70

Our policy is one of continuous research and development. We therefore reserve the right
01/97 to amend, without notice, the specifications given in this document. N/UK 9.3.010.05
 Pneufit Push-In Tube Fittings Inch

Elbow Connector 12040 Fixed Elbow Adaptor 12145

O/D tube to O/D tube O/D Tube to Male BSPT Thread
L
Product A L L Product A B C G L M
C
number O/D number O/D Thread
Tube Tube BSPT
ØA

ØA
12 040 0100 1⁄ 8" 0,65 1⁄8" 1⁄8"
12 145 0118 0,27 0,34 0,66 0,63
5⁄ 32"

M
12 040 0200 0,67 12 145 0318 3⁄16" 1⁄8" 0,27 0,34 0,72 0,65
L

G
12 040 0300 3⁄ 16" 0,72 1⁄4" 1⁄8"
12 145 0418 0,42 0,34 0,77 0,67
12 040 0400 1⁄ 4" 0,77 3⁄16" 1⁄4"
12 145 0328 0,38 0,44 0,78 0,80
5⁄ 16"
B
ØA 12 040 0500 0,84
12 040 0600 3⁄ 8" 1,05
12 040 0700 1⁄ 2" 1,25

Swivel Elbow Adaptor 12147/10147 Swivel Female Elbow Adaptor 12448

O/D Tube to Male BSPT Thread O/D tube to female NPTF thread

Product A B C G L M Product A B C L M
number O/D Thread A/F number O/D NPTF A/F
L L Tube Thread
Tube BSPT
1⁄ 8" 1⁄ 8" 12 448 0118 1⁄ 8" 1⁄ 8" 9⁄ 16" 0,63 1,19
12 147 0118 0,39 0,34 0,63 0,86

ØA
ØA

5⁄ 32" 1⁄ 8" 12 448 0218 5⁄ 32" 1⁄ 8" 9⁄ 16" 0,67 1,19

C 10 140 0418 0,39 0,30 0,66 0,81
3⁄ 16" 1⁄ 8" 12 448 0228 5⁄ 32" 1⁄ 4" 11⁄ 16" 0,67 1,40
12 147 0318 0,43 0,34 0,73 0,86
1⁄ 4" 1⁄ 8" 12 448 0418 1⁄ 4" 1⁄ 8" 9⁄ 16" 0,77 1,22
M

12 147 0418 0,43 0,34 0,77 0,88

M

10 147 0818 5⁄ 16" 1⁄ 8" 0,55 0,34 0,84 0,91 C 12 448 0428 1⁄ 4" 1⁄ 4" 11⁄ 16" 0,77 1,44
G

5⁄ 32" 1⁄ 4" 12 448 0528 5⁄ 16" 1⁄ 4" 11⁄ 16" 0,84 1,48
10 147 0428 0,55 0,44 0,66 0,95
B 12 147 0328 3⁄ 16" 1⁄ 4" 0,55 0,44 0,72 1,04 12 448 0628 3⁄ 8" 1⁄ 4" 11⁄ 16" 1,05 1,58
B 1⁄ 2" 3⁄ 8" 7⁄ 8"
12 147 0428 1⁄ 4" 1⁄ 4" 0,55 0,44 0,77 0,99 12 448 0738 1,25 1,82
10 147 0828 5⁄ 16" 1⁄ 4" 0,55 0,44 0,84 1,03
12 147 0628 3⁄ 8" 1⁄ 4" 0,67 0,44 1,05 1,13
12 147 0728 1⁄ 2" 1⁄ 4" 0,75 0,44 1,25 1,25
12 147 0638 3⁄ 8" 3⁄ 8" 0,67 0,50 1,05 1,20
12 147 0648 3⁄ 8" 1⁄ 2" 0,87 0,63 1,25 1,36
12 147 0738 1⁄ 2" 3⁄ 8" 0,87 0,50 1,05 1,35
12 147 0748 1⁄ 2" 1⁄ 2" 0,87 0,63 1,25 1,50

Swivel Male Elbow 12477 Product A B C G L M

O/D tube to male NPTF thread
number O/D NPTF or A/F
Tube UNF Thread
12 477 0110 1⁄ 8" 10-32 UNF 5⁄ 16" 0,20 0,63 0,73
12 477 0118 1⁄ 8" 1⁄ 8" 7⁄ 16" 0,37 0,63 0,82
L 12 477 0128 1⁄ 8" 1⁄ 4" 9⁄ 16" 0,37 0,68 1,07
12 477 0210 5⁄ 32" 10-32 UNF 5⁄ 16" 0,20 0,67 0,77
ØA

C 12 477 0218 5⁄ 32" 1⁄ 8" 7⁄ 16" 0,37 0,67 0,86

12 477 0228 5⁄ 32" 1⁄ 4" 9⁄ 16" 0,56 0,67 1,07
M

12 477 0318 3⁄ 16" 1⁄ 8" 7⁄ 16" 0,37 0,72 0,88

G

12 477 0328 3⁄ 16" 1⁄ 4" 9⁄ 16" 0,56 0,72 1,09

12 477 0418 1⁄ 4" 1⁄ 8" 7⁄ 16" 0,37 0,77 0,90
B 1⁄ 4" 1⁄ 4" 9⁄ 16"
12 477 0428 0,56 0,77 1,11
12 477 0438 1⁄ 4" 3⁄ 8" 3⁄ 4" 0,56 0,80 1,15
12 477 0518 5⁄ 16" 1⁄ 8" 9⁄ 16" 0,37 0,84 0,96
12 477 0528 5⁄ 16" 1⁄ 4" 9⁄ 16" 0,56 0,84 1,15
12 477 0618 3⁄ 8" 1⁄ 8" 9⁄ 16" 0,37 1,05 1,05
12 477 0628 3⁄ 8" 1⁄ 4" 11⁄ 16" 0,56 1,05 1,26
12 477 0638 3⁄ 8" 3⁄ 8" 3⁄ 4" 0,56 1,05 1,26
12 477 0648 3⁄ 8" 1⁄ 2" 7⁄ 8" 0,75 1,05 1,48
12 477 0728 1⁄ 2" 1⁄ 4" 3⁄ 4" 0,56 1,25 1,37
12 477 0738 1⁄ 2" 3⁄ 8" 3⁄ 4" 0,56 1,25 1,41
12 477 0748 1⁄ 2" 1⁄ 2" 7⁄ 8" 0,75 1,25 1,62

Our policy is one of continuous research and development. We therefore reserve the right
N/UK 9.3.010.06 to amend, without notice, the specifications given in this document. 01/97
 Pneufit Push-In Tube Fittings Inch

Fixed Elbow Adaptor 12445 Extended Swivel Elbow Adaptor 12454

O/D tube to male NPTF thread O/D tube to male NPTF thread

Product A B C G L M Product A B C G L M
C L L
number O/D NPTF A/F number O/D NPTF A/F
Tube Thread Tube Thread

ØA
ØA 1⁄ 8" 1⁄ 8" 5⁄ 32" 1⁄ 8" 7⁄ 16" 0,37 0,67 1,39
12 445 0118 0,28 0,37 0,67 0,66 12 454 0218
12 445 0218 5⁄ 32" 1⁄ 8" 0,28 0,37 0,67 0,66 5⁄ 32" 1⁄ 4" 7⁄ 16" 0,37 0,77 1,49
12 454 0228
M

12 445 0228 5⁄ 32" 1⁄ 4" 0,43 0,56 0,72 0,92 C 1⁄ 4" 1⁄ 8" 9⁄ 16" 0,56 0,67 1,71
G

12 454 0418

M
12 445 0318 3⁄ 16" 1⁄ 8" 0,28 0,37 0,72 0,67 1⁄ 4" 1⁄ 4" 9⁄ 16" 0,56 0,77 1,75
12 454 0428
B 3⁄ 16" 1⁄ 4" 3⁄ 8" 1⁄ 4" 11⁄ 16" 0,56 1,05 2,10
12 445 0328 0,43 0,56 0,79 0,92 12 454 0628
12 445 0418 1⁄ 4" 1⁄ 8" 0,31 0,37 0,77 0,70 3⁄ 8" 3⁄ 8" 3⁄ 4"
12 454 0638 0,56 1,05 2,10

G
12 445 0428 1⁄ 4" 1⁄ 4" 0,43 0,56 0,79 0,92
1⁄ 4" 3⁄ 8" B
12 445 0438 0,63 0,56 0,84 1,10
12 445 0518 5⁄ 16" 1⁄ 8" 0,43 0,37 0,84 0,74
12 445 0528 5⁄ 16" 1⁄ 4" 0,43 0,56 0,84 0,92
12 445 0618 3⁄ 8" 1⁄ 8" 0,52 0,37 1,05 0,80
12 445 0628 3⁄ 8" 1⁄ 4" 0,52 0,56 1,05 0,98
12 445 0638 3⁄ 8" 3⁄ 8" 0,63 0,56 1,05 1,10
12 445 0648 3⁄ 8" 1⁄ 2" 0,94 0,75 1,13 1,36
12 445 0728 1⁄ 2" 1⁄ 4" 0,63 0,56 1,25 1,03
12 445 0738 1⁄ 2" 3⁄ 8" 0,63 0,56 1,25 1,10
12 445 0748 1⁄ 2" 1⁄ 2" 0,94 0,75 1,25 1,36

Tee Connector 12060 Swivel Tee Adaptor 12167/10167

O/D tube to O/D tube O/D Tube to Male Taper BSP Thread
E
Product A C D E F L Product A B C D E F G
C
number O/D A/F number O/D Thread A/F A/F
F
Tube Tube BSPT
12 060 0100 1⁄ 8" 0,26 0,20 0,63 0,32 1,26 D 10 167 0418 5⁄32" 1⁄8" 0,39 0,28 0,81 1,33 0,34
D 12 060 0200 5⁄ 32" 0,30 0.28 0,67 0,40 1,34 12 167 0318 3⁄16" 1⁄8" 0,34 0,35 0,86 1,45 0,34
12 060 0300 3⁄ 16" 0,38 0.28 0,72 0,44 1,44 12 167 0418 1⁄4" 1⁄8" 0,34 0,35 0,88 1,54 0,34
A

12 060 0400 1⁄ 4" 0,42 0,31 0,77 0,48 1,54 10 167 0818 5⁄16" 1⁄8" 0,55 0,43 0,91 1,68 0,34
ØF
L

12 060 0500 5⁄ 16" 0,50 0,43 0,84 0,56 1,68 C 10 167 0428 5⁄32" 1⁄4" 0,55 0,28 0,95 1,33 0,44
E

12 060 0600 3⁄ 8" 0,59 0,52 1,05 0,67 2,10

G

12 167 0328 3⁄16" 1⁄4" 0,43 0,34 0,97 1,45 0,44

12 060 0700 1⁄ 2" 0,71 0,63 1,25 0,81 2,50 12 167 0428 1⁄4" 1⁄4" 0,43 0,35 0,99 1,54 0,44
B
10 167 0828 5⁄16" 1⁄4" 0,55 0,43 1,03 1,68 0,44
12 167 0618 3⁄8" 1⁄4" 0,43 0,52 1,13 2,10 0,44
ØA 12 167 0728 1⁄2" 1⁄4" 0,43 0,63 1,25 2,50 0,44
12 167 0638 3⁄8" 3⁄8" 0,50 0,52 1,20 2,10 0,50
12 167 0738 1⁄2" 3⁄8" 0,50 0,63 1,34 2,50 0,50

Swivel Side Tee Adaptor 12168/10168

O/D Tube to Male Taper BSP Thread

Product A B C D E F G H
number O/D Thread A/F A/F
Tube BSPT
F
10 168 0418 5⁄ 32" 1⁄ 8" 0,39 0,28 0,81 1,47 0,34 0,66
E 3⁄ 16" 1⁄ 8"
D 12 168 0318 0,34 0,35 0,86 1,59 0,34 0,72
12 168 0418 1⁄ 4" 1⁄ 8" 0,34 0,35 0,88 1,65 0,34 0,77
10 168 0818 5⁄ 16" 1⁄ 8" 0,55 0,43 0,91 1,74 0,34 0,84
B

10 168 0428 5⁄ 32" 1⁄ 4" 0,55 0,28 0,95 1,61 0,44 0,72
H

12 168 0328 3⁄ 16" 1⁄ 4" 0,43 0,34 0,97 1,69 0,44 0,72
C
G 12 168 0428 1⁄ 4" 1⁄ 4" 0,43 0,35 1,00 1,76 0,44 0,77
A 10 168 0828 5⁄ 16" 1⁄ 4" 0,55 0,43 1,03 1,87 0,44 0,84
12 168 0628 3⁄ 8" 1⁄ 4" 0,43 0,52 1,13 2,19 0,44 1,05
12 168 0728 1⁄ 2" 1⁄ 4" 0,43 0,63 1,25 2,50 0,44 1,24
12 168 0638 3⁄ 8" 3⁄ 8" 0,50 0,52 1,20 2,25 0,50 1,05
12 168 0738 1⁄ 2" 3⁄ 8" 0,50 0,63 1,34 2,59 0,50 1,25

Our policy is one of continuous research and development. We therefore reserve the right
01/97 to amend, without notice, the specifications given in this document. N/UK 9.3.010.07
 Pneufit Push-In Tube Fittings Inch

Swivel Male Centre Tee 12467 Swivel Male Side Tee 12468
O/D tube to male NPTF thread O/D tube to maleE taper NPTF thread
AØ
L
ØA

ØA

ØA
L
E

C
G

M
C

G
B
B

Product A B C G L E Product A B C G L M E
number O/D NPTF or A/F number O/D NPTF or A/F
Tube UNF Thread Tube UNF Thread
1⁄ 8" 5⁄ 16" 12 468 0110 1⁄ 8" 10-32 UNF 5⁄ 16" 0,63 1,36 0,63 1,36
12 467 0110 10-32 UNF 0,20 1,25 0,73
1⁄ 8" 1⁄ 8" 7⁄ 16" 12 468 0118 1⁄ 8" 1⁄ 8" 7⁄ 16" 0,63 1,36 0,73 0,63
12 467 0118 0,37 1,26 0,81
1⁄ 8" 1⁄ 4" 9⁄ 16" 12 468 0128 1⁄ 8" 1⁄ 4" 9⁄ 16" 0,67 1,44 0,77 0,67
12 467 0128 0,56 1,34 1,07
5⁄ 32" 5⁄ 16" 12 468 0210 5⁄ 32" 10-32 UNF 5⁄ 16" 0,67 1,44 0,67 1,44
12 467 0210 10-32 UNF 0,20 1,34 0,77
5⁄ 32" 1⁄ 8" 7⁄ 16" 12 468 0218 5⁄ 32" 1⁄ 8" 7⁄ 16" 0,67 1,52 0,86 0,67
12 467 0218 0,37 1,33 0,86
5⁄ 32" 1⁄ 4" 9⁄ 16" 12 468 0228 5⁄ 32" 1⁄ 4" 9⁄ 16" 0,67 1,73 1,07 0,67
12 467 0228 0,56 1,33 1,07
3⁄ 16" 1⁄ 8" 7⁄ 16" 12 468 0318 3⁄ 16" 1⁄ 8" 7⁄ 16" 0,72 1,60 0,88 0,72
12 467 0318 0,37 1,45 0,88
3⁄ 16" 1⁄ 4" 9⁄ 16" 12 468 0328 3⁄ 16" 1⁄ 4" 9⁄ 16" 0,72 1,81 1,09 0,72
12 467 0328 0,56 1,45 1,09
1⁄ 4" 1⁄ 8" 7⁄ 16" 12 468 0418 1⁄ 4" 1⁄ 8" 7⁄ 16" 0,77 1,67 0,90 0,77
12 467 0418 0,37 1,54 0,90
1⁄ 4" 1⁄ 4" 9⁄ 16" 12 468 0428 1⁄ 4" 1⁄ 4" 9⁄ 16" 0,77 1,88 1,11 0,77
12 467 0428 0,56 1,54 1,12
1⁄ 4" 3⁄ 8" 3⁄ 4" 12 468 0438 1⁄ 4" 3⁄ 8" 3⁄ 4" 0,79 1,59 0,81 0,79
12 467 0438 0,56 1,57 1,20
5⁄ 16" 1⁄ 8" 9⁄ 16" 12 468 0518 5⁄ 16" 1⁄ 8" 9⁄ 16" 0,84 1,80 0,96 0,84
12 467 0518 0,37 1,68 0,96
5⁄ 16" 1⁄ 4" 9⁄ 16" 12 468 0528 5⁄ 16" 1⁄ 4" 9⁄ 16" 0,84 1,98 1,15 1,98
12 467 0528 0,56 1,68 1,15
3⁄ 8" 1⁄ 8" 9⁄ 16" 12 468 0618 3⁄ 8" 1⁄ 8" 9⁄ 16" 1,05 2,00 0,94 1,05
12 467 0618 0,37 2,10 0,66
3⁄ 8" 1⁄ 4" 11⁄ 16" 12 468 0628 3⁄ 8" 1⁄ 4" 11⁄ 16" 1,05 2,31 1,26 1,05
12 467 0628 0,56 2,10 1,26
3⁄ 8" 3⁄ 8" 3⁄ 4" 12 468 0638 3⁄ 8" 3⁄ 8" 3⁄ 4" 1,05 2,31 1,26 1,05
12 467 0638 0,56 2,10 1,26
3⁄ 8" 1⁄ 2" 7⁄ 8" 12 468 0648 3⁄ 8" 1⁄ 2" 7⁄ 8" 1,05 2,53 1,48 1,05
12 467 0648 0,75 2,10 1,48
1⁄ 2" 1⁄ 4" 3⁄ 4" 12 468 0728 1⁄ 2" 1⁄ 4" 3⁄ 4" 1,25 2,62 1,37 1,25
12 467 0728 0,56 2,50 1,37
1⁄ 2" 3⁄ 8" 3⁄ 4" 12 468 0738 1⁄ 2" 3⁄ 8" 3⁄ 4" 1,25 2,65 1,41 1,25
12 467 0738 0,56 2,50 1,41
1⁄ 2" 1⁄ 2" 7⁄ 8" 12 468 0748 1⁄ 2" 1⁄ 2" 7⁄ 8" 1,25 2,87 1,62 1,25
12 467 0748 0,75 2,50 1,62

Parallel Y Connector 12082 Parallel Y Stem Connector 12084

O/D tube to O/D tube stem to O/D tube
M
E ØN
ØD C ØD
C ØB (2x)
ØA (2x)

ØS
L
L

ØS
E

ØN ØB
ØA

Product A B C D E L N S Product A B C D E L M N S
number O/D O/D Ø Ø Ø number O/D O/D Ø Ø Ø
Stem Tube Stem Tube
5⁄ 32" 5⁄ 32" 12 084 0202 5⁄ 32" 5⁄ 32" 0,43 0,30 0,71 2,05 0,89 0,45 0,13
12 082 0200 0,43 0,30 0,87 1,34 0,43 0,13
5⁄ 32" 1⁄ 4" 12 084 0402 1⁄ 4" 5⁄ 32" 0,43 0,30 0,73 2,23 0.89 0,45 0,13
12 082 0402 0,55 0,43 1,06 1,50 0.51 0,13
1⁄ 4" 1⁄ 4" 12 084 0404 1⁄ 4" 1⁄ 4" 0,55 0,43 0,73 2,23 1,10 0,55 0,13
12 082 0400 0,55 0,43 1,06 1,51 0,51 0,13
5⁄ 16" 5⁄ 16" 12 084 0505 5⁄ 16" 5⁄ 16" 0,63 0,51 0,77 2,36 1,26 0,63 0,13
12 082 0500 0,63 0,51 1,22 1,59 0,59 0,13

Plastic body Plastic body

Our policy is one of continuous research and development. We therefore reserve the right
N/UK 9.3.010.08 to amend, without notice, the specifications given in this document. 01/97
 Conversion Fittings

Parallel Male Y Swivel Adaptor 12448

O/D tube to male NPTF thread
ØN Product A B C D E F G L N S
E ØD number O/D NPTF Ø A/F Ø Ø
C ØA (2x) Tube Thread
12 448 0218 5⁄ 32" 1⁄ 8" 0,43 0,30 0,89 7⁄ 16 0,30 1,72 0,45 0,13
12 448 0228 5⁄ 32" 1⁄ 4" 0,43 0,30 0,89 9⁄ 16 0,44 2,01 0,45 0,13
12 448 0418 1⁄ 4" 1⁄ 8" 0,55 0,43 1,10 7⁄ 16 0,30 1,90 0,55 0,13
12 448 0428 1⁄ 4" 1⁄ 4" 0,55 0,43 1,10 9⁄ 16 0,44 2,15 0,55 0,13
12 448 0628 3⁄ 8" 1⁄ 4" 0,86 0,51 1,67 3⁄ 4 0,44 2,69 0,79 0,13
L

ØS 12 448 0638 3⁄ 8" 3⁄ 8" 0,86 0,51 1,67 3⁄ 4 0,56 2,69 0,79 0,13
12 448 0648 3⁄ 8" 1⁄ 2" 0,86 0,51 1,67 7⁄ 8 0,75 2,88 0,79 0,13
F A/F
G

Plastic body
B

Elbow Banjo Assembly 12R51 Tee Banjo Assembly 12R71

Non regulating bolt O/D tube to male BSPP thread
O/D tube to male NPTF thread
L
Product A B C M L Product A B C M L
L
number O/D NPTF or A/F number O/D ISO G A/F
Tube UNF Thread Tube

ØA
ØA

12 R51 0118 1⁄ 8" 1⁄ 8" 9⁄ 16" 1,22 0,80

M
ØA

5⁄ 32" 5⁄ 32" 5⁄ 16"

12 R51 0210 10-32 UNF 5⁄ 16" 0,87 0,74 12 R71 0210 10-32 UNF 0,87 1,48
M

5⁄ 32" 1⁄ 8" 9⁄ 16" 1,22 0,81 C 1⁄ 4" 1⁄ 8" 9⁄ 16"

12 R51 0218 12 R71 0418 1,22 1,86
C 1⁄ 4" 1⁄ 8" 9⁄ 16" 1,22 0,93 12 R71 0428 1⁄ 4" 1⁄ 4" 11⁄ 16" 1,50 1,90
12 R51 0418 B
1⁄ 4" 1⁄ 4" 11⁄ 16" 1,50 0,95 12 R71 0628 3⁄ 8" 1⁄ 4" 11⁄ 16" 1,50 2,38
12 R51 0428
B 1⁄ 4" 3⁄ 8" 7⁄ 8" 1,74 1,03 3⁄ 8" 3⁄ 8" 7⁄ 8" 1,74
12 R51 0438 12 R71 0638 2,46
12 R51 0628 3⁄ 8" 1⁄ 4" 11⁄ 16" 1,50 1,19

12 R51 0638 3⁄ 8" 3⁄ 8" 7⁄ 8" 1,74 1,23

Straight Connector 10020/12037 Stem Adaptor 10415/12415

Inch tube to MM tube MM O/D Stem to NPTF (Male) Thread

Product A C L Product A B C G L S
number O/D Ø number O/D NPTF A/F
Tube (mm) L Stem Thread
L 10 020 0400 5⁄ 32" 4 1,17 (mm)
ØA

G
ØS

12 415 0218 4 1⁄ 8" 7⁄ 16" 0,37 1,25 0,08

12 037 0305 3⁄ 16" 5 1,26
12 415 0228 4 1⁄ 4" 9⁄ 16" 0,56 1,44 0,08
12 037 0406 1⁄ 4" 6 1,28
ØC

ØA

1⁄ 8" 7⁄ 16" 0,37 1,31 0,13

B

10 020 0800 5⁄ 16" 8 1,35 10 415 0518 5

10 415 0528 5 1⁄ 4" 9⁄ 16" 0,56 1,50 0,13
12 037 0610 3⁄ 8" 10 1,71
10 415 0618 6 1⁄ 8" 7⁄ 16" 0,37 1,33 0,16
12 037 0712 1⁄ 2" 12 1,98
C 10 415 0628 6 1⁄ 4" 9⁄ 16" 0,56 1,52 0,16

12 415 0518 8 1⁄ 8" 7⁄ 16" 0,37 1,37 0,20

12 415 0528 8 1⁄ 4" 9⁄ 16" 0,56 1,56 0,20

10 415 1028 10 1⁄ 4" 9⁄ 16" 0,56 1,74 0,30

10 415 1038 10 3⁄ 8" 11⁄ 16" 0,56 1,81 0,30

10 415 1238 12 3⁄ 8" 11⁄ 16" 0,56 1,95 0,36

10 415 1248 12 1⁄ 2" 7⁄ 8" 0,75 2,15 0,36

Our policy is one of continuous research and development. We therefore reserve the right
01/97 to amend, without notice, the specifications given in this document. N/UK 9.3.010.09
 Pneufit Push-In Tube Fittings Inch

H H
Elbow Banjo Assembly
D
12V0 Elbow Banjo Assembly
D
J
12VA
Regulating Out Regulating Out
O/D tube to male NPTF or O/D tube to male NPTF or
UNF thread UNF thread
Pressure rating on this item Knurled adjustment knob

D1
A
F

A
F
10 bar Pressure rating on this item

K
10 bar

K
E E

G
B B

Product A B C D E F G H K Product A B D1 D E F J H K
number O/D tube thr’d A/F Square number O/D Closed A/F Square
5⁄32
* 12VO00210 10-32UNF 27 18,7 - 9,5 4,4 - - tube
12VO00218 5⁄32 1⁄8 42 22,0 9⁄16 11,5 10 16 22,5 5⁄32
* 12VA00210 10-32UNF - 26,5 - 9,5 18,7 2,5 -
12VO00418 1⁄4 1⁄8 42 23,0 9⁄16 13 10 16 22,5 5⁄32 1⁄8
12VA00218 53 22,0 9⁄16 11,5 9,0 16,0 22,5
12VO00428 1⁄4 1⁄4 54 25,5 11⁄16 13,5 14,5 20 29,5 1⁄4 1⁄8
12VA00418 53 23,0 9⁄16 13,0 9,0 16,0 22,5
12VO00628 3⁄8 1⁄4 54 31,5 11⁄16 19,5 14,5 20 29,5 1⁄4 1⁄4
12VA00428 67 25,5 11⁄16 13,5 11,0 20,0 29,5
12VO00638 3⁄8 3⁄8 64 32,5 3⁄4 19,5 14,5 22 33,0 3⁄8 1⁄4
12VA00628 67 31,5 11⁄16 19,5 11,0 20,0 29,5
12VO00748 1⁄2 1⁄2 72 38,0 7⁄8 23,0 19,0 27 42,0 3⁄8 3⁄8
12VA00638 78 32,5 3⁄4 19,5 13,0 22,0 33,0
12VA00748 1⁄2 1⁄2 93 38,0 7⁄8 23,0 18,0 27,0 42,0
Plastic Body
* Brass Body
Metric dimensions Plastic Body
* Brass Body
Metric dimensions

Our policy is one of continuous research and development. We therefore reserve the right
N/UK 9.3.010.010 to amend, without notice, the specifications given in this document. 01/97
 Pneufit Push-In Tube Fittings Inch

Manifold
O/D tube to O/D tube

C
P
J D
L
E A1

H Product A O/D A1 O/D C D E H J K L M N P

number tube inlet tube outlet
120D60402 1⁄ 4 5⁄ 32 69,5 42,0 13,0 3,4 13,7 16,0 14,0 9,0 20,0 16,4
M
A

120D60502 5⁄ 16 5⁄ 32
K

67,5 42,0 13,0 3,4 12,7 16,0 14,0 9,0 20,2 16,4

L
120D60604 3⁄ 8 1⁄ 4 82,5 48,0 15,0 3,4 17,2 20,0 16,0 10,5 22,7 20,4
N 120D60605 3⁄ 8 5⁄ 16 82,5 48,0 15,0 3,4 17,2 20,0 16,0 10,5 22,7 20,4
Metric dimensions

Manifold
O/D tube to male taper NPTF thread
C P
J D L Product A O/D A1 O/D B C D E G H J K L M N P Q
E A1
number tube tube thread A/F
H G
inlet outlet
124D60228 5⁄ 16 5⁄ 32 1⁄4 85,5 42,0 13,0 11,1 3,4 12,7 16,0 14,0 9,0 20,2 16,4 11⁄ 16
5 5 3⁄8 16,4 3⁄ 4
M

124D60238 16 ⁄ ⁄ 32 86,0 42,0 13,0 12,7 3,4 12,7 16,0 14,0 9,0 20,2
B
K

L
A

124D60428 5⁄ 16 1⁄ 4 1⁄4 85,5 42,0 13,0 11,1 3,4 12,7 16,0 14,0 9,0 22,7 16,4 11⁄ 16
124D60438 5⁄ 16 1⁄ 4 3⁄8 86,5 42,0 13,0 12,7 3,4 12,7 16,0 14,0 9,0 22,7 16,4 3⁄ 4
N 124D60448 3⁄ 8 1⁄ 4 1⁄2 103 48,0 15,0 12,7 3,4 17,2 20,0 16,0 10,5 22,7 20,4 7⁄ 8
Q
124D60548 3⁄ 8 5⁄ 16 1⁄2 107 48,0 15,0 15,9 3,4 17,2 20,0 16,0 10,5 22,7 20,4 7⁄ 8
Metric dimensions

Warning
These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can
exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not
within published specifications, consult Norgren.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products
where applicable.

Our policy is one of continuous research and development. We therefore reserve the right
01/97 to amend, without notice, the specifications given in this document. N/UK 9.3.010.011