GS1333

Kamvas 13 (Gen 3)

Thanks for choosing the HUION Kamvas series pen displays.

Kamvas 13 (Gen 3) is a new generation of creative drawing pen displays with dual

side-mounted dial controllers for designers. Boasting high performance and

versatility, Kamvas 13 (Gen 3) provides an unparalleled drawing and creation

experience for its users.

To ensure that you fully understand and efficiently use this product, we strongly

recommend that you read this user manual carefully.

Note: The pictures in the manual are for reference only and are intended to assist you in
understanding the design and function of the product. A change in design or specification may
occur without notice.

1 / 56 www.huion.com
 GS1333

1. Accessories

After unpacking, make sure you receive the following items:

Kamvas 13 (Gen 3) Pen Display * 1

3-in-1 Cable (1.8m) * 1

USB-A Extension Cable (1.2m) * 1

PW600L Digital Pen * 1

PH06 Pen Holder * 1

PN06 Pen Nib * 10 (Included in the pen

holder)

ST300 Stand * 1 (Optional)

Cleaning Cloth * 1

Glove * 1

Quick Start Guide * 1

2 / 56 www.huion.com
 GS1333

2. Connection

The pen display can be connected to computers and Android devices. Please refer

to the following connection methods.

2.1. Connect via a 3-in-1 Cable

1. Connect the USB-C cable of the 3-in-1 cable to the first USB-C port on the side of

the pen display.

2. Connect the USB-A cable, HDMI cable, and USB-A power cable on the other end

of the 3-in-1 cable to the corresponding ports on your computer.

2.2. Connect via a Full-featured USB-C Cable

1. Plug one end of the full-featured USB-C cable(1) into the second USB-C port on

the side of the pen display (as shown in the picture below) and the other end into

the USB-C port that supports graphic output on your computer/tablet/mobile

phone.

2. If the screen does not light up, or the screen flicker or black screen issues occur,

please plug one end of the USB-C power cable(2) into the first USB-C port on the

side of the pen display and the other end into a power adapter, and connect the

3 / 56 www.huion.com
 GS1333

power adapter to a power source to provide the necessary additional power

support to achieve a stable connection.

Tip:
 Full-featured USB-C cable and power cable need to be purchased separately (available at
HUION Store).
 The interface of the connected device (computer/mobile phone/tablet) should support the
USB 3.1 GEN1 data transfer protocol and DP 1.2 and later, and the power supply
specification should be at least 5V/2A.
 If your computer or Android device (mobile phone/tablet) is low on power, an additional
power supply is required to ensure that it has enough power before you proceed to step 2.

3. Stand Installation and Usage

To enhance the user experience, an ergonomically adjustable stand is optional. You

can adjust the stand between 20° and 50° (6 adjustable angles) to get a more

comfortable experience.

4 / 56 www.huion.com
 GS1333

4. Functions Overview

No. Item Instruction

 Short press: To turn on/off the pen display.

 Press and hold for 3s when it’s on: To bring up the

pen-enabled OSD menu.

Power Button +
①  White light: Under normal working conditions.
Indicator Light
 Red light: In sleep mode/no video input signal.

 No light: Not connected to the power

supply/turned off.

②: Function-switch 1. In Radial mode(the driver is not installed or started),

Button A + Dial you can only assign the same function to ② and ④ .

②④ Controller A Press and hold the function-switch button for 3s to

④: Function-switch bring up the Radial menu, rotate the dial controller to

Button B + Dial select among several functions, and then press the

5 / 56 www.huion.com
 GS1333

Controller B function-switch button to confirm.

2. In Customize mode(the driver is installed and started),

you can assign different functions to ② and ④

respectively. Press the function-switch button to bring

up the function menu or to switch between several

functions while the selected function is automatically

confirmed.

When the driver is not installed or started, the press keys

will perform the default functions. Once the driver is

③ Press Key installed and started, you can customize the press key

functions in the driver according to your personal

preferences.

Please follow the instructions about how to connect via

⑤ USB-C Port a 3-in-1 cable provided on the page to properly connect

the pen display to your computer via this port.

Please follow the instructions about how to connect via

Full-functioned a full-featured USB-C cable provided on the page to

⑥
Type-C Port properly connect the pen display to your computer via

this port. This port supports graphic input.

6 / 56 www.huion.com
 GS1333

5. Driver Installation

5.1. Windows
Note:
①Before installing the driver, please close all graphic software and antivirus programs. The note
(“HuionTabletCore.exe” failed to launch!) below appears only on devices with Windows OS,
indicating that the driver is blocked by antivirus programs or drawing applications.

②Please make sure your computer operating system is Windows 10 or later.

③If the connection fails, please restart the driver or your computer.
④ If you uninstall the driver, the pen display may experience no pressure sensitivity or other
unknown issues in certain applications. In this case please reinstall the driver and your pen
display will return to its default settings.

7 / 56 www.huion.com
 GS1333

Driver Installation Instruction:

1. Connect the pen display to your computer.

2. Click Driver-Kamvas 13 to get the latest driver for your device.

3. Double-click the driver and click “OK” to proceed.

4. Check the box to agree with the User Agreement and click “Install Now”.

5. After the installation has been completed, click on “Try it now”.

8 / 56 www.huion.com
 GS1333

6. A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate a

successful connection. Now you can use your pen display.

9 / 56 www.huion.com
 GS1333

5.2. mac
Note:
① Please make sure your computer operating system is macOS 10.12 or later.
② If the connection fails, please restart the driver or your computer. For more information, please
refer to Troubleshooting. See section.
③ If you uninstall the driver, the pen display may experience no pressure sensitivity or other
unknown issues in certain applications. In this case please reinstall the driver and your pen
display will return to its default settings.

Driver Installation Instruction:

1. Connect the pen display to your computer.

2. Click Driver-Kamvas 13 to get the latest driver for your device.

3. Unzip the driver file and drag the “HuionTablet” icon into the “Applications”

folder.

4. Open the folder and then find and double-click the HuionTablet driver

application.

10 / 56 www.huion.com
 GS1333

5. Connect the pen display to your Mac, and click “Open System Preferences"

when prompted. Go to Security & Privacy > Privacy > Accessibility settings and

click the lock icon to unlock the settings. Tick the checkbox on the left of the

HuionTablet driver application to enable accessibility. Then click the lock icon

to lock the settings.

11 / 56 www.huion.com
 GS1333

6. A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate

that the pen display is successfully connected to your computer. Now you can

use your pen display.

12 / 56 www.huion.com
 GS1333

5.3. Linux（Ubuntu）
Note:
1 Please remember to close the command window and reboot your Linux device after installing

the driver, or the driver will not be useful. After rebooting the device, you can access the system

main menu to find the Huion Tablet driver and then open it to finish some settings.

2 If you are running Linux operating system on VMware, you must use the VMware

Workstation Pro version. And the Play version of VMware Workstation doesn’t support the Huion

Tablet driver.

3 Some versions of the Ubutun operating system don’t support using more than one monitor

simultaneously. And we recommend you upgrade your system to 20.04LTS or later if you want to

use a Huion painting device on multiple display screens simultaneously smoothly.

Huion Tablet Driver installation packages in 2 different formats are available

for Linux devices:

· tar.xz (file format)

· deb (file format)

Here are the step-by-step instructions for installing the driver packages in different

file formats respectively:

5.3.1. Instructions for installing the driver package file in tar.xz

format.

Linux operating systems supported:Ubuntu

5.3.1.1. Steps to Install:

1.Extract the contents of the driver file, huiontablet_XXXX.tar.xz, into a folder.

2.Open the command window in the folder.

13 / 56 www.huion.com
 GS1333

3.Input the following command:“sudo sh install.sh”,and press the enter key on the

keyboard to make your Linux device execute it.

4.Enter the user password to complete the installation.

14 / 56 www.huion.com
 GS1333

5.Please reboot your Linux device to run the driver, or the driver will not be useful.

6.A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate that

the pen display is successfully connected to your computer. Now you can use your

pen display.

15 / 56 www.huion.com
 GS1333

16 / 56 www.huion.com
 GS1333

5.3.1.2. Steps to Uninstall:

1.Open the command window in the folder of the driver.

2.Input the following command in the command window: “sudo sh uninstall.sh”,

and press the enter key on the keyboard to make your Linux device execute it.

3.Enter the user password to complete the uninstallation.

17 / 56 www.huion.com
 GS1333

5.3.2. Instructions for installing the driver package file in deb format.

Linux operating systems supported:Ubuntu

5.3.2.1. Steps to Install:

1.Open the folder and double-click the driver file in deb format to enter the system

default interface of installing the driver on the application store, then click to install.

2.Enter the user password to complete the installation.

18 / 56 www.huion.com
 GS1333

3.Please reboot your Linux device to run the driver, or the driver will not be useful.

19 / 56 www.huion.com
 GS1333

Tips: Please ensure that your Linux device has been connected to the internet when installing

the driver, or the installation will fail when entering the application store interface.

4.A picture of Kamvas 13 GS1333 will appear on the driver interface to indicate that

the pen display is successfully connected to your computer. Now you can use your

pen display.

20 / 56 www.huion.com
 GS1333

5.3.2.2. Steps to Uninstall:

1.Enter the interface of the installed applications on the system ’ s built-in

application store.

2.Find the driver and click to uninstall it.

Tips: If you can't access the system’s built-in application store, you can search out the driver file,

huiontablet_xxx.deb, then double-click it to enter the installation interface, and click the remove

button to uninstall it.

21 / 56 www.huion.com
 GS1333

6. How to Use the Digital Pen

The digital pen enables a seamless user-device interaction, allowing users to draw,

write, move objects, and use customizable pen button functions.

Hold the Pen:

Hold the digital pen as you hold a real pen. Adjust your grip so that you can toggle

the pen press keys easily with your thumb or index finger. Be careful not to

accidentally press the key while drawing with the pen.

Note: Please do not put the digital pen on the pen display when not in use. Otherwise, it may
cause interference that may prevent the mouse from operating properly or the computer from
entering sleep mode.

Cursor Movement:

Move the pen slightly above the working area of the pen display without touching

the surface of the pen display, and the cursor on the screen will move to the new

position accordingly.

Click:

Tap on the working area of the pen display with the pen tip to register a click to

select or highlight contents on the screen; long press and drag the pen tip to move

the selected item; double-click to open the selected item.

Move:

Select an icon or file with the pen tip, then slide the pen tip across the screen to

move it to the target location.

Use the Pen Buttons:

The digital pen supports customizable pen button functions and users can program

22 / 56 www.huion.com
 GS1333

the functions in the driver. The pen buttons will work as long as the vertical

distance between the pen tip and the pen display screen is within the sensing

height (10mm). If you want to disable pen button functions, you can set pen

buttons to no function in the driver.

Replace the Pen Nib:

When the nib of the digital pen is badly worn, please replace it with a new pen nib

in time.

Follow the steps below to replace the pen nib:

1. Open the pen holder and take out a replacement nib.

2. Tilt the pen and pull out the worn nib through the built-in nib clip on the back of

the pen holder.

3. Insert a replacement nib straight into the barrel of the pen until the nib stops

moving forward.

23 / 56 www.huion.com
 GS1333

7. Driver Setting and Functions

7.1. Driver Interface Overview

1 Pen Display

On the “Pen Display” interface, Users can set functions of the display, including

Press Key and Working Area Set. See Section

2 Digital Pen

Users can set functions of the pen on this “Digital Pen” interface, including Press

Key, Mode selection, Pressure Sensitivity Adjustment, and Pressure Test. See Section

3 Store

Huion Store is where you can get the latest information about the product such as

its FAQ or sales promotion. In addition, you can also purchase Huion ’ s other

products or accessories here.

24 / 56 www.huion.com
 GS1333

4 Add Programs

1) Some programs which have already been opened will appear for you to choose

from after clicking Add a Program on the screen. For more programs, you need

to open them and then enter this interface to add, or click Browser, select the

program on your computer, and click Open to get it added.

2) For different programs, you can make different settings for the working area and

the digital pen. Then when you launch another program, the Driver will

automatically recognize it and the setting features will change to its

corresponding ones.

3) When you select All programs, settings for the working area and the functions of

the digital pen are valid for every program that is not customized.

5 Setting

Users can set the functions of a driver on this interface, including check out Device

information, Backup setting, General setting, and its version. See Section

6 Common Problems

Click “ ? ” and jump to Forum in our

website https://support.huion.com/en/support/home to get a user manual or feed

back the problems to us.

7 Switch between Devices

The Driver is able to support two devices at most. Functions of them can be

customized by users respectively. When switch to one of them, functions change to

its corresponding ones.

25 / 56 www.huion.com
 GS1333

7.2. Pen Display Setting

7.2.1. Press Key

You can customize the functions of these press keys according to your own habits,

and you can uncheck "Enable press keys" in the lower left corner to turn off these

functions. Place the cursor over one of the buttons on the screen of your computer

to check its default value. Click a button and then a pop-up dialog box appears.

Choose what you want and set its function.

Refer to this table of settings below to help you decide if you want to change the

existing settings.

Note: The performance of functions in the table below is up to the device that you have
connected. And this table is subject to change without notice.

The settings of the press keys’ functions can be found in the following list.

The functions of the press keys can be set as:

26 / 56 www.huion.com
 GS1333

Click on the input box and enter a valid key combination to create a
Keyboard Key
shortcut (support up to 18 characters).
Select the functions of a Mouse or Wheel. Please see the picture below for
detailed information of these functions. Mouse: Left Button, Right Button,
Mouse Key
Middle Button, and Double-left Click. Wheel: Wheel Forward and Wheel
Backward. Other functions: Ctrl, Alt, Shift, and Win .
Tool Select Switch Screen, Eraser, Recover, Revoke, or Clear.
Click Browse and select the program that you want to run quickly. After
Run Program
that, press the key to launch the item.
For the Windows OS, the key functions can be set as:
Lock the Screen, Sleep, Power Off, Show/Hide Desktop Icon, Task View, Start
Menu, and Calculator.
System For the macOS, the key functions can be set as:
Application Sleep, Lock the Screen, Show/Hide Desktop, Mission Control, Launch Pad,
and Finder Search.
For the Linux OS, the key functions can be set as:
Lock the Screen, Sleep, and Power Off.
You can apply these functions to press keys: Previous Song, Next Song,
Multimedia
Play/Pause,Volume up, Volume down, and Muted.
You can toggle between the normal precision and precision that you
choose, from Fine(level 1) to Ultra Fine(level 5).
 When you select Precision Mode, the Precision Mode window appears
and you can move the slider to set the precision you want to toggle into.
Precision Mode  For example, if you assign Precision Mode to a pen button, when you
press the pen button, you switch to working in the precision that you
selected using the slider. When you press the pen button again, you
switch back to working in the normal precision.
 Press “Esc” or press the pen button for the third time to exit Precision
Mode.
This function allows you to pan and scroll in a document or item by moving
the pen tip up and down or right and left.When you select Pan/Scroll, the
Pan/Scroll
Scroll Speed window appears. Move the slider to your preferred scrolling
speed.
Pick it up and you can use the key to pull up the Quick Menu. Detailed
Quick Menu
information for reference is down below this table.
You can lock the pressure at the current level until you release the
component. For example, if you assign this setting to a pen button, you can
Fixed Pressure
paint with pressure sensitivity enabled in your application until you reach
Sensitivity
the brush size you like. Then, press and hold the pen button to lock in that
brush size as long as you are pressing and holding the button.
When None is selected, the key will not perform any function when
None
pressed.

Note: The pictures are for reference only.

27 / 56 www.huion.com
 GS1333

The specific settings of the Quick Menu are as follows:

Click Customize in the picture above to call out a quick menu (see picture 1). For

each of the six buttons on the left, users can enter a name for it and set unique

function for it. After that, users can call up the Quick Menu by pressing the key (see

picture 2). The menu disappears after a click on any of the six buttons. By clicking

“Fix” once the menu will be fixed on the desktop while after a second try the “Fix”

button changes to“Close”and the menu disappears (see picture 3). Put the cursor

on the menu to drag it.

Picture1

28 / 56 www.huion.com
 GS1333

Picture2

Picture3

7.2.2. Working Area Setting

Select the Working Area tab to adjust the ratio of the distance of pen movement on

the pen display to that of the corresponding cursor movement on the monitor. By

default, the entire active area of the pen display maps to the whole monitor.

If more than one monitor is in use and they are in extended mode, users need to

choose one that will be mapped to on the driver interface and the other one as the

external display.

In mirror mode (All monitors display the same content), the pen display maps to

the entire screen on each monitor and cursors displayed on them move

simultaneously.

Define the pen display area that will be mapped to the monitor. Three modes on

the driver can be chosen:

29 / 56 www.huion.com
 GS1333

[1] Full Area:

The entire active area of the pen display will be mapped to the monitor. It is the

default setting.

[2] Screen Ratio:

The ratio of the active pen display area is the same as that of the monitor, which as

a general rule, is 16:9. For example, if you choose the screen ratio and draw a circle

on the pen display, then a circle appears on the monitor that has been connected to

the pen display, in this case some parts of the pen display may not work. But if you

don’t choose the screen ratio and draw a circle, then the circle may change into an

oval on the monitor.

The ratio of the active pen display area depends on that of the display device, which

as a general rule. In Screen Ratio mode, these two ratios keep the same.

[3] Custom Area:

30 / 56 www.huion.com
 GS1333

1) Enter coordinate values.

2) Users can adjust the working area of the pen display by changing the outlines

of the smaller rectangle. Users can also drag the two blue rectangles to select

the active areas of the digital pen on the screen and the pen tablet. (see picture

1 and 2).

Picture 1

31 / 56 www.huion.com
 GS1333

Picture 2

7.2.3. Rotate Working Area

Change the direction of the pen display to adapt to the left- and right-handed

operation. You can rotate the pen display by 0°, 90°, 180° or 270°.

32 / 56 www.huion.com
 GS1333

Picture1

Picture2

33 / 56 www.huion.com
 GS1333

7.2.4. Calibrate Your Pen Display

Click Monitor Calibration tab and follow the instructions to calibrate your pen

display.

Please use the digital pen to click on the center red dot of the cross in a common

pen-holding posture. You can cancel Calibration and restore default.

34 / 56 www.huion.com
 GS1333

7.3. Digital Pen Setting

7.3.1. Press Key

You can use this digital pen to interact with your device, including drawing, writing,

moving files, or activating the functions of pen press keys.

The setting of the pen press keys is the same as the Press Key setting of the display.

Please refer to it.See Section

35 / 56 www.huion.com
 GS1333

7.3.2. Pen Nib Activity

The pen nib of the digital pen can be set as Valid/Invalid in the driver according to

users’ needs. Click the drop-down button to set its activity. In Valid mode, the pen

can complete specified actions such as clicking, double-clicking, and dragging

when you tap the pen on the screen. In Invalid mode, the pen can control the

movement of the cursor, but cannot complete specified actions.

36 / 56 www.huion.com
 GS1333

7.3.3. Enable Windows ink

Microsoft Windows provides extensive support for pen input. When the “Enable

Windows Ink” option is ticked, pen features are supported in software such as

Microsoft Office, Windows Whiteboard, Adobe Photoshop CC, SketchBook 6, etc.

Note: macOS and Linux OS do not support this feature.

37 / 56 www.huion.com
 GS1333

7.3.4. Pressure Sensitivity Adjustment

Users can adjust the pressure sensitivity level by dragging the slider in the Pressure

Sensitivity Adjustment box according to your usage habits. Users can also check

the five options from soft to hard on the right of the box to find the proper pressure

sensitivity for themselves. Click the redo button at the top right to revert to the

default pressure.

①To decide the force required for a pen to produce a click or a pressure sensation.

②③You can change the slope of the pressure response curve.

 Draw lines in the Pressure Test box with the pen, and the bar on the right will

simultaneously show the pressure changes on the pen nib. Click the

“Delete” button above to remove the lines, reset the pressure sensitivity level

and test it until you find the appropriate pressure sensitivity level.

38 / 56 www.huion.com
 GS1333

 A steep curve means a more sensitive response.

39 / 56 www.huion.com
 GS1333

7.4. Driver Setting

7.4.1. Device

You can view the information of the firmware and the connected product here.

* Display Settings

Scene Mode: “Standard Mode”, “Game Mode”, “Movie Mode” and “USER”

can be selected.

When selecting “Standard Mode”, “Game Mode”, or “Movie Mode”, you can

adjust the "Saturation" value by dragging the blue slider.

When selecting “USER” mode, you can adjust the "Brightness" value, “Contrast

Ratio” value, and "Saturation" value by dragging the blue slider.

Brightness: You can drag the corresponding slider to adjust the brightness of the

screen.

40 / 56 www.huion.com
 GS1333

Contrast Ratio: You can drag the corresponding slider to adjust the contrast ratio of

the screen.

Saturation: You can drag the corresponding slider to adjust the saturation of the

screen.

Color Temperature: "6500K", “7500K”, "9300K", or "USER" mode can be selected.

In "USER" mode, color temperature can be customized by adjusting RGB values.

Color Space: "Native", "sRGB", "Rec. 709", or "Adobe RGB" can be selected.

In Native color space, "Scene Mode" and "Color Temperature" can be freely

adjusted or selected.

While in sRGB, Adobe RGB, and DCI-P3 color spaces, to ensure that the standards

of the three color spaces can be met as far as possible, only "Brightness" in "USER"

mode can be adjusted.

Note: For macOS users, Display Settings is available only when the full-featured USB-C cable is
used for the connection. If you want to change the display settings, please use the full-featured
USB-C cable to connect your device, or make adjustments by long pressing the power button for
3s to bring up the pen-enabled OSD menu.

41 / 56 www.huion.com
 GS1333

7.4.2. Backup

The backup contains all the settings data of the device. You can restore these

settings at any time, locally or on another computer. Importing and exporting

configuration settings is supported, which helps to avoid repeated settings when

you use different devices.

Export settings: Click Export to export the current settings data locally.

Import settings: Click Import, open file manager, select the configuration file, and

then open it.

42 / 56 www.huion.com
 GS1333

Default Setting: All the settings on the current device are covered and the default

settings are restored.

43 / 56 www.huion.com
 GS1333

7.4.3. General Setting

Language: Click the drop-down button to switch between 14 languages.

Color: You can select the color of the Driver interface among Dark, Blue, and Light

according to your preference.

Start Menu: Click to select boot options. Click to enable “New Message Alert”,

“Auto-Start”, and “Automatic Updates”, which helps improve our products and

services, and makes it easier for you to experience the latest driver in a timely

manner. They can also be disabled anytime.

Hotkey: You can set a hotkey to call out the Driver interface quickly according to

your usage habits. When you want to restore the press key for opening the driver

page by default, click "Reset to Default".

Switch Screen: Set a hotkey to switch between the monitors to which the current

pen tablet/pen display maps. The Switch Screen hotkey works only for the current

device supported by the HuionTablet driver application.

Administrator privilege: This item is only available for Windows OS. The driver will

identify whether or not the current driver interface is opened with administrator

privilege. If it is opened with administrator privilege, this item will not be displayed.

If it is not opened with administrator privilege, this item will be displayed.

44 / 56 www.huion.com
 GS1333

7.4.4. About

Users can check the Driver version here. Click “Check for Updates” to find the

latest Driver version and then follow the prompts to update the Driver if needed;

Click "Feedback" to send a feedback email if you have any question about the

driver;

Click "Uninstall" to delete the current driver. If you can't click or draw or there is no

pressure sensitivity under the software, click "Software Diagnosis" to find out

45 / 56 www.huion.com
 GS1333

cause.For specific operation,Please click here.

7.5. Dial Setting

You can set the dial controller to a customize mode or use it to work with Windows

Radial menu.

7.5.1. Customize Mode

In Customize mode, dual dial controllers can be programmed respectively to perform

different functions in the driver.

Steps:

1. Open the driver, click “Dial Setting” and choose Dial1/Dial2 to set its function.

46 / 56 www.huion.com
 GS1333

2. In the menu bar that pops up, set any functions for the selected dial controller.

Dial Functions:

Default The default three functions of a dial controller are “Zoom

47 / 56 www.huion.com
 GS1333

in/out”, “Adjust Brush Size”, and “Scroll Up/Down”.

Click on the input box (Clockwise and Anticlockwise) and enter

Keyboard valid key combinations to create shortcuts. After that, you can

rotate the dial controller to implement the settings.

You can customize the dial controller to function as a mouse

Mouse
wheel, which can be used in combination with modifier keys.

You can turn the dial controller to play the previous song/frame

Multimedia or next song/frame. You can also rotate it to turn the volume up

and down.

In Photoshop, you can set the dial controller to adjust selected

Photoshop parameters, brush size, brush flow, and brush opacity. You can

also use it to switch layers and rotate canvas.

In Lightroom, you can set the dial controller to adjust selected

Lightroom
sliders.

In Premiere, you can set the dial controller to go to

Premiere previous/next frame, adjust selected sliders, and zoom in/out

timeline.

In Clip Studio Paint, you can set the dial controller to zoom in/out
Clip Studio Paint
or rotate canvas.

TVPaint In TVPaint Animation, you can set the dial controller to go to

Animation previous/next frame, adjust selected parameters, and switch

layers.

48 / 56 www.huion.com
 GS1333

After “No function” is selected, the corresponding press key

becomes inactive and no command will be triggered when it is

No function
pressed. This setting is helpful for disabling press keys that you

are not used to.

Note: When you customize the dial controller to “Mouse”, “Multimedia”,

“Photoshop”, “Lightroom”, “Premiere”, “Clip Studio Paint”, and

“TVPaint Animation”, you can select “Reverse” to reverse the functions of the

Dial/Touch key in different directions.

49 / 56 www.huion.com
 GS1333

7.5.2. Radial Mode

Radial mode can only be implemented on Windows operating systems with no

drivers installed or enabled.

In Radial mode, functional configurations of the dual dial controllers are the same.

Steps:

1. Ensure the driver is not installed or started.

2. Go to Windows Settings > Devices > Wheel.

3. Choose the default tools for the Radial menu or customize the tools.

4. Turn the dial controller clockwise or anti-clockwise to use it.

Tip: On a computer running Windows 10 or later, the dial controller in Radial mode

can be used within Photoshop to adjust size, opacity, flow, smoothing and control

of all brush-like tools.

① Press and hold the function-switch button for about 3s to bring up the Radial

50 / 56 www.huion.com
 GS1333

menu, and then select the brush icon by rotating the dial controller.

Brush

② Press the function-switch button to confirm the selected brush function.

Brush

③ When the “Brush Settings” panel appears as shown below, you can rotate the

dial controller to select following functions (size, opacity, flow, smoothing and

control). After choosing the corresponding function, press the function-switch

button, and then rotate the dial controller left and right to adjust the parameter.

Size

51 / 56 www.huion.com
 GS1333

8. Pen-enabled OSD Menu

OSD menu settings on Kamvas 13 can be done with the digital pen.

Long press the power button for 3s to bring up the OSD menu, and then use the

digital pen to adjust the settings on the screen. The user interface is designed in a

minimalist way. Four interfaces including the Scene Mode adjustment interface,

Color Temperature adjustment interface, Color Space adjustment interface, and

General Settings interface are reserved to meet users’ needs.

8.1. Scene Mode

Click the sun icon to adjust the brightness. On the upper left of the interface, there

are four modes to be chosen: "Standard Mode", "Game Mode", "Movie Mode" and

"USER" mode. On the upper right are “Brightness”,“Contrast”, and “Saturation”.

When "Standard Mode", "Game Mode", or "Movie Mode" is chosen, only the third

bar will be blue and users can drag it to adjust the saturation.

When "USER" mode is chosen, all three bars will be blue and users can adjust the

brightness, contrast, and saturation by dragging them.

52 / 56 www.huion.com
 GS1333

8.2. Color Temperature Settings

On the upper left are three standard color temperatures (“6500K”, “7500K”, and

“9300K”) and a customizable one “USER” mode. On the upper right are the RGB

color values: “R(Red)”, “G(Green)”, and “B(Blue)”.

If “6500K”, “7500K”, or “9300K” is chosen, all three bars will be dark and users

can not adjust “R(Red)”, “G(Green)”, or “B(Blue)”.

When "USER" mode is chosen, all three bars will be blue and users can adjust

“R(Red)”, “G(Green)”, and “B(Blue)” by dragging them respectively.

53 / 56 www.huion.com
 GS1333

8.3. Color Gamut Settings

Four color spaces: "Native", "sRGB", "Rec. 709", and "Adobe RGB" are displayed on

the interface.

Note: In Native color space, values on the “Scene Mode” adjustment interface and “Color
Temperature” adjustment interface can be freely adjusted or selected.
While in sRGB, Rec.709, and Adobe RGB color spaces, to ensure that the standards of the three
color spaces can be met as far as possible, only "Brightness" in "USER" mode can be adjusted.

54 / 56 www.huion.com
 GS1333

Native sRGB、Rec.709、Adobe RGB

8.4. General Settings

On the menu are “TypeC”, “HDMI”, “Full”, “4:3”, “16:9”, and “Reset”

to be chosen.

①TypeC/HDMI: connect via a type-c cable or HDMI cable.

②FULL: change the viewable area to full screen.

③4:3: change the aspect ratio of viewable area to 4:3.

④16:9: change the aspect ratio of viewable area to 16:9.

⑤Reset: All the settings of the OSD menu will be reset to default ones.

Note: The pen-enabled OSD menu will automatically close if no operations are performed for a
few moments.

55 / 56 www.huion.com
 GS1333

9. Troubleshooting

Problems Solutions
You may have installed other drivers or run the drawing software
when installing the driver. Please uninstall all the drivers, close the
The pen tablet cannot sense drawing software, and then reinstall the Huion driver. It is
the pen pressure while the suggested to restart your computer after finishing the installation.
cursor can move. In addition, if the application is not compatible with the driver or
does not support pressure sensitivity, there will also be no
pressure sensitivity in this application.
1. Make sure you are using the pen that originally came with your
The digital pen does not
tablet.
work.
2. Make sure you installed the driver correctly.
1. Make sure you are using the pen that originally came with your
The press key does not
tablet.
work.
2. Make sure you installed the driver correctly.
Please do not place the digital pen on the working area of the pen
The computer cannot enter
display when you are not using it, otherwise, the computer will not
sleeping mode.
be able to enter sleep mode.
The press keys of the digital pen will not work when the vertical
distance between the pen nib and the tablet is over 10mm. If the
vertical distance is within 10mm and the pen press key does not
The press key of the digital
work, please check whether the driver works well and whether you
pen does not work.
have assigned functions to the two keys correctly or not. Then if
the keys still do not work, maybe your pen is broken and you can
contact our service team as long as the pen is under warranty.
The computer cannot Please check whether the USB port of your computer functions
recognize the pen display. well. If not, please try another USB port.
Failed to connect Kamvas Please restart your computer or driver; make sure the USB port
13 to other device and and USB-C cable work well; unplug the USB cable and plug it
“ Device Disconnected ” again; try another USB port; download and reinstall the latest
appears. driver; please whitelist the driver on macOS devices.

If your problem is not resolved, please click FAQs to view more troubleshooting

methods or email us([email protected]).

56 / 56 www.huion.com