Scribd
Upload
6 views

Selfstudys Com File

Uploaded by

divyansh4awd
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

Selfstudys Com File

Uploaded by

divyansh4awd
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

To Observe Diffraction Of Light Due to a Thin Slit

Aim
To observe diffraction of light due to a thin slit. .

Apparatus
Two razor blades, adhesive tapes, a screen a source of monochromatic light (laser
pencil) black paper and a glass plate.

Theory

Diffraction is a phenomenon of bending of light around the comers or edges of a fine


opening or aperture. Diffraction takes place when order of wavelength is comparable or
small to the size of slit or aperture. The diffraction effect is more pronounced if the size
of the aperture or the obstacle is of the order of wavelength of the waves. The diffraction
pattern arises due to interference of light waves from different symmetrical point of the
same wave front. The diffraction pattern due to a single slit consists of a central bright
band having alternate dark and weak bright bands of decreasing intensity on both sides.

Procedure

1. Fix the black paper on the glass plate by using adhesive.


2. Place two razor blades so that their sharp edges are parallel and extremely close
to each other to form a narrow slit in between.
3. Cut the small slit in between the sharp edges of blades and place at a suitable
distance from a wall or screen of a dark room.
4. Throw a beam of light on the slit by the laser pencil.
5. A diffraction pattern of alternate bright and dark bands is seen on the wall.

Conclusion
When light waves are incident on a slit or aperture then it bends away (spread) at the
comers of slit showing the phenomena of diffraction of light.

Precaution

1. Air gaps should not be left between glass plates and black paper.
2. The razor blades should be placed extremely closed as possible.
3. Diffraction pattern should be seen on a wall of a dark room.
4. A point source of monochromatic light like laser torch should be used.

You might also like