Sl.

No Item Description U0M Rate Remark

Compound Wall & Pump House

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
1 dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the Cum 100
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In
All kind of soil

Providing and laying in position cement concrete of specified grade including the cost of
Cement Free
2 centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand Cum 2933
Issue Basis
(zone-III) : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay (1st Class) F.P.S. (non modular) bricks of class Cement Free
3 Cum 4100
designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Issue Basis

Providing and laying damp-proof course 20mm thick with cement mortar 1:2 (1 cement : Cement Free
4 Sqm 120
2 coarse sand) and mixing water proofing compound Issue Basis

Brick work with common burnt clay (1st Class Brick) F.P.S. (non modular) bricks of class
Cement Free
5 designation 10 in superstructure above plinth level in all shapes and sizes in : Cement Cum 4275
Issue Basis
mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay (1st Class Brick) F.P.S. (non modular) bricks
Cement Free
6 of class designation 10 in superstructure above plinth level Cement mortar 1:4 (1 cement Sqm 505
Issue Basis
:4 coarse sand

Providing and laying in position specified grade of reinforced cementconcrete, excluding

Cement Free
7 the cost of centering, shuttering, finishing and reinforcement - All work 1:2:4 (1 cement : Cum 3289
Issue Basis
2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Cement Free
8 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) on internal/external walls Sqm 160
Issue Basis

Finishing walls with water proofing cement paint of required shade : Cement Free
9 SQM 55
New work (Two or more coats applied @ 3.84 kg/10 sqm) Issue Basis

Pointing on brick work or brick flooring with cement mortar 1:3 (1cement : 3 fine sand): Cement Free
10 Sqm 60
Flush / Ruled/ Struck or weathered pointing Issue Basis

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
11 position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or KG 8.16
more (Reinforcement steel wil be supplied by NCC from central store on free issue basis)

Centering and shuttering including strutting, propping etc. and removal of form for
12 SQM 180
:Foundations, footings,etc.
Centering and shuttering including strutting, propping etc. and removal of form for
13 SQM 200
Columns, Pillars etc.
Painting with synthetic enamel paint of approved brand and manufacture of required
14 colour to give an even shade : new work over two or more coat enamel paint over one SQM 65
coat or primer.

Labour Charges for fixing of 3.6 m x 1.20 m M.S. gate (M.S. gate supplied by NCC from
15 centrel store to the construction site on FREE ISSUE BASIS).required for proper NOS. 2000
completion of work as per instructions of Engineer‐in‐charge.

Labour Charges for fixing of 1.2m wide MS wicket gate (M.S. wicket gate supplied by
16 NCC from centrel store to the construction site on FREE ISSUE BASIS).required for proper NOS. 1000
completion of work as per instructions of Engineer‐in‐charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
17 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Cum 70
ramming and watering, lead up to 50 m and lift upto 1.5 m.
Sl. No Item Description U0M Rate Remark

Making plinth protection 25mm thick of cement concrete 1:2:4 (1 cement : 2 coarse sand
(zone - III) : 4 graded stone aggregate 20 mm nominal size) over 25mm thick bed of PCC
Cement Free
18 1:4:8 (1 cement : 4 sand (zone-III) : 8 graded stone aggregate 20mm nolminal size) well Sqm 421
Issue Basis
rammed and consolidated and grouted with fine sand, including necessary excavation,
levelling & dressing & finishing the top smooth

Reinforced cement concrete work in beams, suspended floors, roofs chajjas, lintels,
bands, plain window sills, above plinth level, excluding the cost of centering, shuttering, Cement Free
19 Cum 3059
finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 Issue Basis
graded stone aggregate 20 mm nominal size).

Cement Free
20 15 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) on internal/external walls Sqm 160
Issue Basis

Cement Free
21 6 mm cement plaster of mix 1:3 (1 cement: 3 fine sand) to Ceiling Sqm 123
Issue Basis

Centering and shuttering including strutting, propping etc. and removal of form for
22 SQM 220
Lintels, beams, plinth beams, etc.

Centering and shuttering including strutting, propping etc. and removal of form for
24 SQM 240
Suspended floors, roofs, landings, balconies and access platform

Structural steel work in single section, fixed with or without connecting plate,including
cutting, hoisting, fixing in position and applying a priming coat of approved steel primer
25 KG 15
all complete (Structural Steel wil be supplied by NCC to the Panchayat site from central
store on FREE ISSUE Basis.)
Labour Charges for fixing M.S Doors/Windows /Ventilators with M.S. Grills (M.S.
26 Doors/windows with M.S. Grills wil be supplied by NCC from central store to the Sqm 350
construction site on FREE ISSUE Basis.)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate)

Cement Free
27 finished with a floating coat of neat cement, including cement slurry, etc. complete. 25 Sqm 245
Issue Basis
mm thick with 20 mm nominal size stone aggregate

Roof Waterproofing Treatment:Providing and Laying of Bricks on flat surface in cement

mortar 1:4 with base coat of cement slurry with water proofing compound and finishing Cement Free
28 Sqm 344
the top brick surface with neat cement punning added with water proofing compound and Issue Basis
drawing the lines in box shape on top of the surface

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or
29 more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer SQM 110
applied @ 2.20 kg/10 sqm)
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4
graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire,
30 including centering and shuttering, roughening cleaning, fixing and finishing in cement Nos. 200
mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills
and soffits. 50 mm thick
Providing Precast cement concrete (1:1.5:3) Manhole Cover Size of 1000 x 1000 x 100 Cement Free
31 Nos. 306
mm Issue Basis

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS
: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm
32 Rmt 270
gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter including fixing
with PVC clips
Sl. No Item Description U0M Rate Remark

DISTRIBUTION SYSTEM

Installation, Testing & Commissioning of following size pipes for distribution system
confirming to latest/relevent I.S. 4984/1995 Specification with all jointing material and
special confirming to latest/relevent I.S. specification with loading, Unloading and Carting
upto site of work from our store also including specials for these pipes from the stock yard
and and lowering them into the trenches and laying true to alignment and gradient and
jointing etc. including Excavation of earth (in different type of earth) for distribution pipe
33
line and rising main trenches and including lift upto 1.50m and lead 50m and reffiling
watering including ramming of the excavated earth into the trenches and also disposal of
surplus earth upto 50m from the center of the trenches also earth filling work for proper
levelling of water work site in accordance with the contour map and grid map of existing
site enclosed in drawing (including testing of pipe lines for making up to the length ) all
complete as per instruction of Engineer-in-charge.

63 / 75 mm dia. HDPE Pipe PN-6 Class PE-100 in All kinds of soils Earth work excavation
I Rmt 90
and refilling by manually Where ever machinery not reached @ Village/Habitation area.

a 63 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 53
b 75 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 53
c 90 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 59
d 110 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 63
e 125 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 67
f 140 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 72
g 160 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 76
h 180 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 120
i 200 mm dia. HDPE Pipe PN-6 Class PE-100 in All kind of solis Rmt 126

Labour Charges of following sizes (D.I.) pipes for rising main/distribution system
conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials
such as specials conforming to latest /relevant I.S. specifications, suitable for D.I pipes,
34 as per IS‐1239 /2000 and IS 8329/2000 or their latest amendment including F.O.R.
destination and all taxes and insurance etc. with loading, unloading and Carting up to site
of work, also including specials for these pipes and Labour charges for laying Fitting,
Testing of D.I. pipes 100mm, 150mm & 200mm
D.I. Pipes 100mm, 150mm & 200mm Rmt 30
Excavation of earth in ordinary soil (loam, clay or sand) for pipe line and rising main
trenches including lift upto 1.50 m and lead upto 50 m and refilling watering, ramming of
35 the excavated earth into the trench and also disposal of surplus earth upto 50m from the
center of the trenches including supply of all material labour, T&P etc complete as per
instructions of Engineer ‐in ‐charge.
ordinary soil Cum. 75

Labour charges for fixing work of the following dia DI butterfly /sluice valves, class I,
working pressure 10 Kg/cm2 confirming to IS: 780/1969 or its latest amendments,
including valve fittings & Dismantling Joints as per requirement F.O.R. destination, and
36
lowering them into the already prepared trenches, fixing in position and jointing them
with pipelines and testing etc. complete and also including supply of jointing materials
etc. complete . as per instructions of Engineer ‐in ‐charge.

Sluice valve ‐ 125 mm dia Nos. 525

Sluice valve ‐ 100 mm dia Nos. 500
Sluice valve ‐ 50 mm dia Nos.
Scour valve ‐ 80 mm dia Nos. 475

Labour charges for fixing & testing etc. of single/double ball type air valve conforming to
latest/relevent I.S. specifications and lowering them into the trenches, fixing in position
and jointing them with pipelines and testing etc. complete (including supply of jointing
materials and Valve fittings etc complete) as per instructions of Engineer.

50 mm Nos. 275

Labour charges for fixing of under ground sluice value type fire hydrant consisting of 80
mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia
standard makes iron coupling with cap and etc. complete conforming to latest/relevent
37 Nos. 1000
I.S.specifications up to site of work and lowering them into the trenches, fixing in position
and jointing them with pipelines and testing etc. complete (complete as per instructions
of Engineer ‐in ‐ charge.
Sl. No Item Description U0M Rate Remark

Construction of following type masonary chambers as per department type design and
Cement Free
38 drawing including Heavy duty M.S. Manhole Cover and all materials, labour, T&P etc
Issue Basis
complete for proper completion of work as per instructions of Engineer ‐in ‐charge.

Sluice valve chamber (masonry Type)

dia upto 200 mm ‐ 1000 (L) x 1200 (W) x 1300 (H) mm. as per Drawing D-4 Nos. 11425

Sluice valve chamber (surface box Type) as per drawing D-13 Nos. 3000

Fire Hydrant chamber (750 (L) X 450 (W) X 1000 (H) mm) as per Drawing D-5 Nos. 8271

Air Valve Chamber

350 (L) x 350 (W) x 500 (H) mm Nos. 2801
Scour Valve Chamber
dia upto 200 mm ‐ 1000 (L) x 1200 (W) x 1300 (H) mm Nos. 11425

Construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone
ballast in proportion of 1:1.5:3, for pipe line, its bending, fixing & binding the same with
Cement Free
39 0.50 mm thick binding wire in position & necessary centering & shuttering including
Issue Basis
curing and supply of all materials, labour, T & P etc. required for proper completion of the
work and as per specifications for RCC work as per instructions of Engineer ‐in ‐charge.

Dismantling of Following type of surfaces including sorting out and stacking of

40 serviceable materials and disposal of unserviceable materials upto a distance of
50m as per instructions of Engineer ‐in ‐charge.
a B.O.E. surface sqm 42
b Bituminous surface sqm 50
c Interlocking Road sqm 62
d C.C. Road sqm 180
Reinstatement of the following type of road surface with old and new materials
41 including supply of all materials, labour, T&P etc. required for proper completion
of the work as per instructions of Engineer ‐in ‐charge.
Including All
a B.O.E. surface (50% of existing bricks to be reused) sqm 131
Materials
b Bituminous surface sqm 1370
c Interlocking Road (80% existing blocks tobe reused) sqm 427
d C.C. Road sqm 938

Making house connection should be done at least 2 m inside the boundary wall tap from
distribution line to outer wall of house, of 1 m G.I. pipe above ground & average 5 mtr.
20mm MDPE Pipe below ground including specials, saddle, Tap, etc. of suitable size, T&P
42 etc. including excavation, laying and jointing, Tap fixing & testing, including making of Nos. 1000
R.C.C. stand post of size (200x200x1400 mm) for proper completion of work as per
instructions of Engineer-in-charge as per Dwg 12. (Free issue of 20mm MDPE Pipe, 20mm
GI Pipe, PP Saddle, Flow control valve, Tap, specials, cement & steel).