Scribd
Upload
24 views

'LoadSave' program

Uploaded by

fernandopedersoli88
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

'LoadSave' program

Uploaded by

fernandopedersoli88
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SCHMIDT + Datum: 14.09.

2009
Use of LoadSave Program
HAENSCH
Optisch- elektronische Seite 1 von 2
Messinstrumente seit 1864

You could load the standardisation data / definition file or the calibration data
of the measuring head new into the ATR.

The data file as well as the load – save software you will find
on the CD which was delivered together with the instrument or it was send to
you by E-Mail.

There are existing two different possibilities:

1. To load all data back into the instrument.


 Please consider that in this case all settings and definitions which
you made, for example your methods, are lost.

2. To load / renew only the calibration data of the measuring head into
the instrument.
 In this case all setting or definitions will still kept in the
instrument only the calibration data’s will be replaced.

To use the program LOADSAVE you have to copy it to your PC.

Please connect the instrument via the also supplied serial data cable to the serial
com port of your PC.

Start now the program Loadsave, choose the langue (English or German) by
pressing the flag with your cursor and choose the correct used serial port (COM1
– COM4).

SCHMIDT+HAENSCH © Schmidt und Haensch GmbH & Co


Optisch- elektronische Messinstrumente seit 1864
SCHMIDT + Datum: 14.09.2009
Use of LoadSave Program
HAENSCH
Optisch- elektronische Seite 2 von 2
Messinstrumente seit 1864

1. Connect your ATR to PC


2. Start ATR
3. Press Menu key
4. Give in '241030162' and confirm with 'Enter'
5. Move to 'Communication'
6. 'Enter'
7. Enter 'Store head data'
data’s)) (file: Hxxxx.def)
!(In case you would like to load only the calibration data’s
7. Enter 'Configuration'
!(In case you would like to load all data’s)! (file: sxxxxx.def)
8. Now you'll see 'Start the PC program "LoadSave"
9. Do it and go on working on PC:
10. Select Comport and Language
11. Choose 'Save to Instrument'
12. Select your last definition file or e.g. the file 's(serial number).def'
13. In case you will load only the calibration data for your measuring head
into your instrument please use the 's(serial number).def' file from your
supplied CD.
14. To save all your definitions and settings use the option 'Load from
instrument' in order to save them to PC.
15. After the routine is done press 'Menu'. Switch off your instrument, after
some seconds switch it on again. Now it should work correctly again.

SCHMIDT+HAENSCH © Schmidt und Haensch GmbH & Co


Optisch- elektronische Messinstrumente seit 1864

You might also like