How-To Flash or Install .Pac Firmware (ROM) Using SPD Upgrade Tool
How-To Flash or Install .Pac Firmware (ROM) Using SPD Upgrade Tool
On this page, we are going to use the SPD Upgrade Tool to Flash or install the Stock Firmware (ROM Flash File) on devices powered by
Spreadtrum/Unisoc Chipset.
Caution: Flashing or installing stock Firmware using the SPD Upgrade Tool may wipe out the personal data from the device. Therefore, we
recommend you to take a backup of your data before using the SPD Upgrade Tool.
How to Install PAC Firmware (ROM) using the SPD Upgrade Tool
1 Download and install the SPD Driver on your Computer (if in case SPD Drivers are already installed on the computer, then SKIP this step).
2 Download Stock Firmware (ROM Flash File) of your Spreadtrum/Unisoc Device (if in case you have already downloaded the Stock
Firmware then SKIP this step of find the .pac based Stock Firmware on FirmwareFile or NaijaROM or through Google).
3 Extract the SPD Upgrade Tool on your computer (assuming you have already downloaded the Upgrade Tool; if not then Download SPD
Upgrade Tool). Once Upgrade Tool is extracted on the computer, you will be able to see the following files:
Steel Solutions: The Best Choice
for Construction Projects
Get high-quality steel solutions for all your
construction needs. Contact us today for a…
sponsored by: Steel Solutions LEARN M…
Choisir sa pub
$1,500 $113
7 Locate the .pac based Stock Firmware (ROM Flash File) on your Computer (assuming you have already downloaded the Stock Firmware
in Step#2) and Click on Open to Load the Firmware:
8 Connect your Spreadtrum/Unisoc Device to the Computer using the USB Cable (make sure the device is Power Off):
10 Now, Upgrade Tool may take few minutes to complete the Flashing or installation process:
11 Once the Flashing or installation process is completed, you will be able to see the Passed Message on the Upgrade Tool:
12 Now, Close Upgrade Tool and Disconnect your Spreadtrum/Unisoc device from the Computer.
Congratulation! You just learned to flash or install .pac firmware on Spreadtrum/Unisoc device.
Readme Once:
[*] Download Upgrade Tool: If you are looking for the latest version of SPD Upgrade Tool, then head over to the Upgrade Tool Section page.
[*] Download Latest version of SPD Research Tool: If you are looking for the latest version of SPD Research Tool, then head over to the
Research Tool Section page.
[*] Download Latest version of SPD Factory Tool: If you are looking for the latest version of SPD Factory Tool, then head over to the Factory
Tool Section page.
[*] Download SPD/Unisoc Driver: If you are looking for SPD/Unisoc USB Driver compatible with the SPD Flash Tool, then head over to
Download SPD USB Driver page.
Site Links
Upgrade Tool
Research Tool
Privacy Policy
Useful
How-to Use
Source Code
SPD Driver
Connect
spdflashtool.com is not affiliated or endorsed by Unisoc Communications | Hosted on Hostinger, CDN by BunnyCDN
Copyright © 2016-2024 SPD Flash Tool. All Rights Reserved.