1.

REFERENCES:
All Structural Engineer's drawings shall be read in
conjuction with the Architectural drawings and any
discrepancies so discovered be reported

2. DIMENSIONS:
150mm thick Grade 20 Concrete All dimensions are in millimeters unless stated otherwise.

750
1500 Under no circumstance should scaling be done on this
floor slab reinfonced with A98

800
drawing.
BRC steel mesh in the topping 600 300 600
1200

75
75mm high Kicker 3. CONSTRUCTION:
200mm thick broken stone

200 200 150

600 600 75mm high Kicker All load bearing walls to be constructed in solid concrete
hardcore filling blinded with fine
blockwalls of at least 7N/sq.mm characteristic compressive

75
sand and covered 1000gauge 8H1203-200

500
Damp Prrof Membrane. strength complying with BS 5628 Part 1 1978;
Structural use of unreinforced masonry.

750
200mm thick watered and well 7H1201-200B2

8H1203-200
500

(BUT IN ANY CASE NOT LESS THAN 1500mm)

02 02 02 02

600
All internal partition walls shall be hollow clay blocks.

7H1201-200 B1
compacted natural murram filling
02 02 6H1602 6H1602

SITE DIMENISON
1500

1500
02

200
4H1602 02 02 Mortar to conform to mortar designation (ii) of table 1 BS
200mm thick Concrete Blocks

SITE DIMENISION

1200

1200
200
20 5628 Part 1

SITE DIMENISION
bedded and jointed in cement 10
sand (1:4) mortar 02 02 02 02 R0820-200
02 02 WALL TIES

750
Links (a.b.r.)

600
R0810-200 Provide masonry anchors every 2 courses using galvanised

500

500
Links (a.b.r.) mild steel debond ties to BS1243
200 x 600mm thick grade 20 200
plain concrete strip foundation MURRAM FILLING:
Murram filling shall be laid in layers not exceeding 250mm,
500 200 500 optimum moisture achieved and compacted to 98% mod
200 200 200 500 200 100 200 500

50 300

300
50mm Cover
to reinft. AASHTO.
1200
600 1500
01 01 MATERIAL GRADES:

50
50mm Cover to reinft. Minimum concrete grade for all structural elements is C25
SECTION A - A THROUGH THE STRIP WALL FOUNDATION (600 x 200mm Thick) FOOTING TYPE F1 1200 X 1200 X 300 (24No.) FOOTING TYPE F1 1200 X 1200 X 300 (4No.) and the yield strength of steel reinforcement to be at
least 410N/mm unless otherwise locally indicated.

CONCRETE CONCRETE Works Cube

Strength N/mm2
GRADE COVER
MM

7 days 28 days
1 2 3 4 5 6 7 8 9 FOUNDATIONS 25 N/mm2 50mm 16.5 25
1400 3800 3800 2600 3800 3800 3800 3800
25 N/mm2 40mm 16.5 25

25 N/mm2 20mm 16.5 25

G G
25 N/mm2 20mm 16.5 25
1400

1400
F1 F1 F1 F1 F1 F1 F1 F1

C1 C1 C1 C1 C1 C1 C1 C1
F F

1400
E E
3600

D D

2200
F1 F1 F1 F1 F1 F1 F1 F1

C1 C1 C1 C1 C1 C1 C1 C1
1200
10300

C C No: Date: Revision/Issue

Project:
1200
A98 BRC Square mesh PROPOSED COMMERCIAL
A98 BRC Square mesh A98 BRC Square mesh reinforcement all over BUILDING TO BE BUILT ON PLOT
reinforcement all over
reinforcement all over the ground floor 5109, BLOCK 333, KYENGERA
3600

3600
the ground floor the ground floor concrete slab topping
concrete slab topping CENTRAL, KYENGERA TOWN
concrete slab topping
COUNCIL, WAKISO DISTRICT.

F1 F1 F1 F1 F1 F1 F1 F1 Client:

C1 C1 C1 C1 C1 C1 C1 C1
MR. KATO COLLINS GODFREY
P. O. Box 5869, Kampala, Uganda.
B B Tel: 0760-766361
1700

1700
F2 F2 F2 F2
Title:

C2 C2 C2 C2 C2 C2 C2 C2 FOUNDATION LAYOUT PLAN AND

A A
1500

PAD FOOTINGS DETAILS.

1500
1400 3800 3800 2600 3800 3800 3800 3800
Drawn by: KSB Checked by:

26800
Scales: 1:25, 50 Date: DEC. 2024

1 2 3 4 5 6 7 8 9 Sheet No: A1 / 01 of 3

Structural Consultant:

FOUNDATION LAYOUT PLAN (Scale 1 : 50)