Home » Types of Road Freight Transport

Types of Road Freight Transport

Dashboard > Freight Forwarder > Surface Transport > Types of Road Freight Transport IN PROGRESS

LESSON PROGRESS 14% COMPLETE

Road freight transport presents different types of trucks available according to the type of goods
carried. Here is a full overview of the several vehicle structures:

Rigid Vehicles: a chassis-cab, literally a chassis with a driver’s cab fitted at the front, and
another party constructs the load-bearing bodywork that is fitted to the rear of the cab. Rigid
vehicles have either two or three axles. Commercial trucks with two axles have a payload
carrying capacity up to eight tons, and those with three axles have a payload-carrying capacity
of up to 15 tons
Articulated vehicles: they are made up with two solid structures that bend in the middle. There
are two different types: Trailers and road trains.
Trailers integrate two different units: a cab and a towed trailer (semi-trailer), both
independent and articulated. The cab is the prime mover that carries the semi-trailer but does
not carry any loads itself as goods are transported inside the towed trailer.
Road trains: A multi-combination vehicle including both structures above mentioned and
hauling more different trailers. This can be a prime mover hauling more than one trailer or a
rigid body truck hauling two trailers.

It is crucial to understand all different characteristics of road freight vehicles first before learning about
the main types trucks according to type of goods carried.

Types of Trucks

Flatbed truck: includes a load floor and removable side rails and a bulkhead in front to protect
the tractor in the event of a load shift. Can haul almost anything (heavy loads, containers, bulks).
Vehicles with truck tarps: It is the most common truck used for all types of loads generally. As
tarps can cover any part of the body truck (roof, sides or door). It is quite flexible when goods
seem to be difficult to load.
Refrigerated truck bodies: Used for transport of goods (generally food) that needs
temperature monitoring. An integrated engine keeps the solid structure cool and at a right
temperature.
Tanker trucks: liquids, chemicals and gases are transported and stored during a certain period
of time according to their specific needs. Usually they carry petrol, oil, LP gas and other
chemicals registered by ADR regulation.
 Box trucks: are rigid and straight trucks used for average transport of goods like courier and
main delivery services. However goods have to be loaded up and down through the back doors
of the vehicle.
Transportation of certain special types of goods: For example trucks that transport animals
alive (cage trucks) or other vehicles (car carriers).

Bulk Freight

Road freight vehicles are used for the carriage of bulk freight in cases where rail transport is not the
suitable mode of conveyance carriage of bulk freight in cases where rail transport is not the suitable
mode of conveyance

Dry bulk trailers (hopper trailers) are used to transport free-flowing dry bulk commodities. The
hopper trailer is distinguished from an open trailer with a solid flat floor in that it has opening hatches
on the underside or on the sides to discharge its load. Hopper trailers are loaded from the top and
unloaded by gravity through funnel-shaped receptacles (hoppers) on the undercarriage of the vehicle.
There are two main types of hopper trailers: open and covered.

Open hopper trailers are used to transport commodities that may get wet and dry out without harmful
effects, mostly mining products. Covered hopper trailers have sliding roofs for freight that must be
protected from the elements, such as grain, sugar and fertilizer.

Tankers are suitable for the carriage of a wide variety of bulk liquids, gas and powders/pellets in tanks
integrated into the vehicle. Commodity loading is performed pneumatically or by pouring
commodities from the top.

Unloading is done in several ways

pneumatically from the top of the tank (such as the various types of acid, gas and volatile
substances)
pneumatically from the bottom of the tank (such as slurrified substances and powderised or
pelletised material
decanted from the bottom (such as liquids that thicken when cooled off (such as oil, tallow,
tar/bitumen and creosote) which are first heated with in-vehicle fitted heaters)
drained or poured (such as liquids that can flow freely from the bottom of the tank without the
necessity for pneumatic pumping and pre-heating, e.g. refined petroleum products and most
potable liquids).

Break-bulk freight

Various freight types that are not suited for containerisation or bulk carriage are transported in special
vehicles custom-designed for the freight. The most prominent of these are

Moisture-susceptible goods that have to be transported in fully enclosed vehicles, commonly

known as “vans”. Vans are designed to carry break-bulk, mostly boxed, crated, bagged, wrapped
and palletised freight of all kinds. Common commodities transported are paper products,
wooden products (e.g. furniture), canned goods and food products. The payload is typically
made up of less-than-truck-load and less-than- container-load shipments. Vans are often
 equipped with various interior loading devices, for example belt rails and moveable bulkheads,
to secure loads.
Goods that require certain temperatures, ranging between freezing and normal room
temperature, during transportation can be carried in refrigerated vans; however, refrigerated
containers are becoming more dominant. Goods types that require refrigerated carriages are
perishable items such as vegetables, fruit, juices, dairy products, red meat, poultry and fish.
Some shipments of fruit and vegetables require only insulated and ventilated enclosure to
retard the ripening process. Meat vans are equipped with specialised rails for animal carcasses.
Dairy and poultry products require specialised interior racks to ensure cooled air circulation.
Heavy items that are not subject to damage by the elements (e.g. marble and granite blocks
and uncontainerised indivisible oversized items) are carried on flatbed trailers.
Uncontainerised oversized items, for example transformers, agricultural equipment and
machinery, that would exceed height restrictions if carried on open wagons and flatbed trailers.
Metal objects, for example, steel ingots, metal sheets, coiled steel, pipes, bundled and
compressed scrap, and palletised hardware and building material, are transported in standard
open trailers.
General goods that are packed in bags can be carried in open trailers with high sides. Weather-
sensitive goods can be transported in waterproof bags, otherwise the trailers can be covered
with tarpaulins if necessary.
Long items, such as logs, poles and steel rods and rails, and baled goods can be carried on long
open trucks and trailers equipped with stanchions on the sides.
Light road vehicles, mostly motorcars, station-wagons, panel vans, minibuses and light trucks,
are transported in open or closed motorcar carriers. After the vehicles are driven on, they are
secured/fastened during transit and then driven off the trailer at the destination, using a fold-up
ramp attached to the trailer.

Container freight transport

It is rapidly gaining market share over the traditional break-bulk method of carriage. Semi-finished and
finished items that can fit in standard containers have become the dominant type of non-bulk haulage.
Transport operators internationally use standard-size containers that are 6,0 m or 12,0 m long, 2,4 m
wide and 2,4 m or 2,6 m high, making them suitable for intermodal transport. Various container types
are available to meet the needs of the following freight types and packages

General-purpose containers for boxes, cases, wrapped pallets, bags, drums, etc.
High cube containers for bulk commodities and items taller than 2,4 metres
Open-top containers for tall indivisible items exceeding a height of 2,6 metres
Flat-rack containers for out-of-gauge cargo
Refrigerated containers for perishable goods
Ventilated containers for products requiring ventilation (e.g. to retard the ripening of fresh
produce)
Tank containers for liquids and gas
Insulated containers to avoid environmental contamination or impact
Platform containers for barrels, drums, cable spools, machinery and processed timber
Collapsible containers – for lower cost of returning containers to owners

Primary and Secondary

Road freight transport operations can be broken down into two main types. These are primary
transport and secondary transport.

The primary transport element is the movement of full loads on large vehicles with a single delivery
point. Primary transport is all about moving the product at minimum cost, which generally involves
using as large a vehicle as possible and making sure that the vehicle is filled to capacity. Vehicles are
operated for as long as possible, sometimes on a 24-hour, three-shift basis, to maximize vehicle time
utilization. Return loads is important in order to achieve the maximum load utilization of the vehicle.

The secondary transport element is the movement of loads on smaller delivery vehicles. It usually
involves direct contact with the customer or end user. Customer service is the major criterion and not
cost reduction. Accurate scheduling of secondary vehicles very important. Service is usually critical.
Specialist vehicles may be used for secondary delivery.

Types of trailers and semitrailers

There are many types of trailers and semitrailers commonly used internationally, which are

Vans are designed for the transportation of moisture-susceptible goods and therefore are fully
enclosed, with sliding or roll-up doors on one or both sides, swing or roll-up doors at the rear
side, and a fixed roof. Vans are designed to carry break-bulk, mostly boxed, crated, bagged and
palletised freight of all kinds. The payload is typically made up of less-than-truck-load
shipments. Vans are loaded and unloaded from the side or the rear. Freight handling is
conducted either completely or partially manually using wheeled ramps and maneuverable belt
or roller-bed conveyors, or through the use of forklift trucks.
A refrigerated van is completely enclosed and insulated, and has mechanical cooling equipment
or a cooling medium, such as carbon dioxide, in order to carry perishable freight at desired
temperatures. Refrigerated vans are loaded and unloaded from the side (in which case the
doors are also insulated), or through the rear. Freight handling is conducted either completely
or partially manually using wheeled ramps and maneuverable roller-bed conveyors, or through
the use of forklift trucks.
Container carriers consist of an open, fully accessible solid flat or a spine (skeletal) deck that
supports the container. Container carriers are loaded from the side or the top.
Flatbed trailers are designed to carry oversize freight that is too big to fit into standard
containers, although standard and high-cube containers are often transported on flatbed
trailers. Flatbed trailers are loaded from the side or the top.
Lowbed semitrailers (colloquially called gooseneck trailers) are designed to carry high-cube
containers and oversize freight that cannot fit into standard containers, on a depressed flat
payload section behind the drawbar section that is lower than that of a traditional container and
flatbed trailer. Lowbed semitrailers are loaded from the side or the top, and sometimes wheeled
machinery (especially chain-wheeled construction machinery) is driven on and off using fold-up
ramps at the departure and destination points, while being secured/fastened during transit.
Tankers are suitable for the carriage of a wide variety of bulk liquids, gas and powders/pellets in
tanks integrated into the vehicle. Commodity loading is performed pneumatically or by pouring
commodities from the top. Unloading is done in several ways: (a) pneumatically from the top of
the tank (such as the various types of acid, gas and volatile substances); (b) pneumatically from
the bottom of the tank (such as slurrified substances and powderised or pelletised material; (c)
decanted from the bottom (such as liquids that thicken when cooled off (such as oil, tallow,
tar/bitumen and creosote) which are first heated with in-vehicle fitted heaters); and (d) drained
or poured (such as liquids that can flow freely from the bottom of the tank without the
necessity for pneumatic pumping and pre-heating, e.g. refined petroleum products and most
potable liquids).
Livestock trailers are designed to transport all kinds of livestock, mostly cattle, sheep, goats and
hogs. These vehicles have ventilation openings on the sides; doors on the sides and rear
appropriately designed for the kind of livestock to be transported; and ramps to herd livestock
into and out of the vehicles and between decks. The floors are textured and the side walls are
often cushioned to minimise livestock slipping or sustaining injuries. Conventional livestock
trailers are not suitable for the conveyance of horses and poultry.
Dry bulk trailers (hopper trailers) are used to transport free-flowing dry bulk commodities. The
hopper trailer is distinguished from an open trailer with a solid flat floor in that it has opening
hatches on the underside or on the sides to discharge its load. Hopper wagons are loaded from
the top and unloaded by gravity through funnel-shaped receptacles (hoppers) on the
undercarriage of the vehicle. There are two main types of hopper trailers: open and covered.
Open hopper trailers are used to transport commodities that may get wet and dry out without
harmful effects, mostly mining products. Covered hopper trailers have sliding roofs for freight
that must be protected from the elements, such as grain, sugar and fertiliser.
Furniture vans (pantechnicons) are specifically designed to carry bulky but relatively light
freight, i.e. large freight items of which the mass-to-volume ratio is low. Pantechnicons (also
referred to as deep drop vans – the floor being lowered to facilitate easy loading and to create
voluminous payload capacity) are used to convey furniture, for household removals, and for big
fragile items that need bulky packaging.
Motorcar carriers are enclosed or partly enclosed trailers designed to carry light road vehicles
(not only motorcars). Motorcar trailers feature an adjustable deck that can be reconfigured as
bi-level to accommodate different vehicle shapes and sizes. The vehicles are driven on at the
departure terminal, secured/fastened during transit and driven off the trailer at the destination
using ramps.
Side stanchion trailers feature stanchions on the sides between which freight can be secured.
Common goods items carried include mainly logs, poles, masts, steel rods, steel rails and
prefabricated long building materials (e.g. roof trusses) and baled goods. The payload is loaded
and unloaded from the top by cranes. Some side stanchion trailers are fitted with their own
loading cranes. For safety reasons and easier handling ability with cranes, logs are bundled with
cables and/or chains and tighteners.
Open top trailers are designed primarily for the transportation of bulk and break-bulk freight
that is not moisture-retentive (mostly mining products), metal objects (e.g. scrap metal, steel
ingots, coiled steel, sheet steel and pipes), palletised freight (e.g. bricks, tiles and bottles) and in
some cases non-palletised packaged freight. In the case of bulk freight, loading is performed by
front-end loaders or by pouring commodities from the top. To unload bulk freight, some of
these trailers can either be tipped sideways (in which case the sides are slanted) or to the rear
(in which case the rear side has sturdy horizontal top hinges, i.e. a vertical flap-up side instead
of a drop-side). Break-bulk freight is carried on trailers with drop sides. Break-bulk freight is
loaded and unloaded from the side or the rear and is conducted either completely or partially
manually using wheeled ramps and maneuverable belt or roller-bed conveyors, or through the
use of forklift trucks, or from the top using cranes, or with a lift mounted at the rear end of the
trailer (if there is no loading platform
 available where the vehicle can reverse up to), or a crane mounted at the front end of the
payload section to load and unload freight from/to either side.

 Previous Topic Back to Lesson Mark Complete 

Course Progress

29% COMPLETE Last activity on June 21, 2024 8:09 am

Course Home

 Expand All

 Course Videos – Freight Forwarder

 12 Topics

 Freight Planning
 9 Topics

 Freight Transportation
 6 Topics

Surface Transport
14 Topics


 Road Freight Transport

 International Road Freight

Types of Road Freight Transport

Vehicle Selection and Acquisition

Freight Costing

Freight Routing and Scheduling

Vehicle Fleets Assessments

Factors Affecting Vehicle Utilization

Motor Vehicles Act 1988

Central Motor Vehicle Rules 1989

Carriers Act 1865

Rail Transport

Railways Act 1989

 Intermodal Transport

Containerisation
 11 Topics

Inland Container Depots (ICD) and Container Freight Stations (CFS)

 5 Topics

Sea Transport
 14 Topics

Airline Transport
 11 Topics

International Freight Transport

 8 Topics

Integrated Logistics
 5 Topics

Future Developments
 3 Topics

Return to Freight Forwarder

Copyright © 2024 Vskills