Scribd
Upload
10 views

Assignment 4

Uploaded by

abisekrs1234
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
10 views

Assignment 4

Uploaded by

abisekrs1234
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

NATIONAL INSTITUTE OF TECHNOLOGY TIRUCHIRAPPALLI – 620 015

DEPARTMENT OF MECHANICAL ENGINEERING


Course Code: MEIR12 Class: I Year, B Section
Course Name: Engineering Graphics Date of Assignment: 25.11.2024
Weightage: 30% Last date for submission: 02.12.2024
Assignment 4
SECTION OF SOLIDS

1. A cube of edge length 25 mm is resting on its base with its two side faces inclined at
30° to the VP. It is cut by a section plane parallel to the VP and 15 mm from the axis.
Draw the sectional front view and the top view of the cube.

2. A pentagonal prism with the edges of the base 25 mm and the axis 50 mm rests on one
of its rectangular faces with the axis inclined at 30° to the VP. It is cut by a cutting plane
perpendicular to the VP, inclined at 45° to the HP, and passing through the centre of the
base so that the smaller part of the object is removed. Draw the front view, the sectional
top view, and the true shape of the section.

3. A hexagonal pyramid with the edge of the base 25 mm and the axis 50 mm rests on one
of its triangular side faces with the axis parallel to the VP. It is cut by a section plane
perpendicular to the HP, inclined at 30° to the VP, and passing through a point P on the
axis 20 mm from the base. Draw the top view, the sectional front view and the true shape
of the section.

4. A pentagonal pyramid of 30 mm base side and 60 mm long axis is on a triangular face


in the H.P. with its axis parallel to the V.P. It is cut by a vertical section plane making an
angle of 60º to the V.P. and passing through the centre of the base. Draw its sectional
front view and obtain true shape of the section retaining the apex.

5. A cylinder of diameter 50 mm and length of the axis 65 mm has its axis parallel to the
VP and inclined at 30° to the HP. It is cut by a cutting plane perpendicular to the HP,
inclined at 30° to the VP, and passing through a point P on the axis 25 mm from the top
end. Draw the top view, the sectional front view, and the true shape of the section of the
cylinder.

6. A cone with base diameter 50 mm and the axis 65 mm has its axis parallel to the HP and
inclined at 45° to the VP. It is cut by a section plane perpendicular to the VP and inclined
at 30° to the HP. Draw the front view, the sectional top view, and the true shape of the
section, if the cutting plane passes through a point P on the axis 20 mm from the base
in such a manner that the apex is removed.

DEVELOPMENT OF SURFACES

7. A hexagonal prism having base with a 30 mm side and a 70 mm long axis, is resting on
its base on the ground with a side of the base inclined at 45º to the V.P. It is cut by an
auxiliary inclined plane making an angle of 45º with the H.P. and passes through a point
15 mm below the top end of the axis. Obtain the development of the lateral surface of
the truncated prism.

8. A square pyramid with 30 mm side of base and 50 mm long axis is resting on its base
with a side of the base parallel to V.P. It is cut by a section plane perpendicular to V.P.
and inclined at 45º to H.P. The section plane is passing through the mid-point of the axis.
Draw the development of the cut pyramid.

9. A pentagonal pyramid of 30 mm base side and 60 mm axis, rests on its base in the H.P.
It is cut by two section plane which meet at a height of 20 mm from the base. One of the
section planes is horizontal, while the other is an auxiliary inclined plane whose V.T. makes
45º with H.P. Draw the development of the lateral surface of the solid when apex is
removed.

10. A cylinder of 40 mm diameter of base and 55 mm long axis is resting on its base on H.P.
It is cut by a section plane perpendicular to V.P. and inclined at 45º to H.P. The section
plane is passing through the top end of an extreme generator of the cylinder. Draw the
development of the lateral surface of the cut cylinder.

11. A right circular cylinder with 40 mm diameter of base 60 mm height is truncated at its
two ends by two different section planes as shown in Fig. 1. Develop the lateral surface
of the truncated cylinder.

Figure 1

12. The frustum of a cone of 60 mm base diameter 20 mm top diameter and 50 mm height
is resting on its base in the H.P. It is cut by an A.I.P. inclined at 30º to the H.P., the H.T.
of which is tangential to the base circle. Draw the development of the lateral surface of
the retained frustum.

*****

You might also like