Unit I

Crystal Physics
Introduction
The matter is usually regarded to exist in solid state or fluid state. All the materials are
composed of atoms and molecules. A solid is an essentially an ordered array of atoms, bound
together by electric forces to form a very large molecule. There are three different types of solids.
Crystalline, poly crystalline and amorphous.
In a crystal, atoms are arranged into a regular periodically repeated structure that extends
throughout the whole sample. The atoms are said to have long range order. Poly crystalline
material is composed of many small crystals or grains of somewhat irregular size. In an
amorphous solid a long range order is absent. (i.e.,) they have short range order. There is no
periodicity in which atoms are arranged in space. They are also regarded as super cooled liquids.
Examples : metallic crystals : copper, silver, aluminum etc.,
Non metallic crystals: Germanium, silicon
Amorphous or non crystalline materials: glass, rubber, plastic

Difference between crystalline and amorphous material.

S.No Crystalline Amorphous

1 Regular arrangement of atoms Random arrangement of atoms does not
gives definite and geometric shape. give definite and Geometrical shape.

2 They are anisotropic They are isotropic

3 They have sharp Melting Point They do not have sharp Melting Point
4 They possess internal symmetry They do not possess internal symmetry

Crystal Physics’ or ‘Crystallography’ is a branch of physics that deals with the study of all
possible types of crystals and the physical properties of crystalline solids by the determination
of their actual structure by using X-rays, neutron beams and electron beams.
CLASSIFICATION OF SOLIDS
Solids can broadly be classified into two types based on the
arrangement of units of matter.
The units of matter may be atoms, molecules or ions.
They are,
• Crystalline solids and
 • Non-crystalline (or) Amorphous solids
CRYSTALLINE SOLIDS
• A substance is said to be crystalline when the arrangement of units of matter is regular
and periodic.
• A crystalline material has directional properties and therefore called as anisotropic
substance.
• A crystal has a sharp melting point.
• It possesses a regular shape and if it is broken, all broken pieces have the same regular
shape.
• A crystalline material can either be a single (mono) crystal or a polycrystal.
• A single crystal consists of only one crystal, whereas the polycrystalline material
consists of many crystals separated by well-defined boundaries.
o Examples
▪ Metallic crystals – Cu, Ag, Al, Mg etc,
o Non-metallic crystals – Carbon, Silicon, Germanium,
• In amorphous solids, the constituent particles t arranged in an orderly manner. They are
randomly distributed.
• They do not have directional properties and so they are called as `isotropic’ substances.
• They have wide range of melting point and do not possess a regular shape.
o Examples: Glass, Plastics, Rubber etc.,
o SPACE LATTICE
• A lattice is a regular and periodic arrangement of points in three dimensions.
• It is defined as an infinite array of points in three dimensions in which every point has
surroundings identical to that of every other point in the array.
• The Space lattice is otherwise called the Crystal lattice

o
• Consider the points P, Q and R.
• Let us join the points P and Q by a straight line, and the point P and R by another
straight line.
• The line PQ is taken as X-axis and the line PR is taken as Y-axis.
• The distance between any two successive lattice points in the X-direction is taken as `a’.
• Similarly, the distance between any two successive lattice points along the Y-direction is
taken as ‘b’.
• Here a and b are said to be lattice translational vectors. Consider a square lattice in
which a=b.
• Consider two sets of points A, B, C, D, E, F and A, B, C, D, E, F.
 • In these two sets, the surrounding environment looks symmetrical; i.e. the distances AB
and AB, AC and AC, AD and AD, AE and AE and AF and AF are equal.
• Therefore, in the arrangement of points, if the surrounding environment looks the same
when the arrangement is viewed from different lattice points, then that arrangement is
said to be a space lattice.
o BASIS:

• A crystal structure is formed by associating every lattice point with an unit assembly of
atoms or molecules identical in composition, arrangement and orientation. This unit
assembly is called the `basis’.
When the basis is repeated with correct periodicity in all directions, it gives the actual
crystal structure. The crystal structure is real, while the lattice is imaginary.
CRYSTAL STRUCTURE

UNIT CELL:
A unit cell is defined as a fundamental building block of a crystal structure, which can
generate the complete crystal by repeating its own dimensions in various directions.
CRYSTALLOGRAPHIC AXES:
Consider a unit cell consisting of three mutually perpendicular edges OA, OB and OC as
shown in figure.
Draw parallel lines along the three edges.
These lines are taken as crystallographic axes and they are denoted as X, Y and Z axes.

LATTICE PARAMETERS
Consider the unit cell as shown in figure. Let OA, OB and OC are the intercepts made by
the unit cell along X, Y and Z axes respectively.
These intercepts are known as primitives. In crystallography the intercepts OA, OB and
OC are represented as a, b and c.
The angle between X and Y axes is represented as .
 Similarly the angles between Y and Z and Z and X axes are denoted by  and 
respectively as shown in the above figure. These angles,  and  are called as interaxial
angles or interfacial angles.
To represent a lattice, the three interfacial angles and their corresponding intercepts are
essential. These six parameters are said to be lattice parameters.
PRIMITIVE CELL:
It is the smallest unit cell in volume constructed by primitives. It consists of only one full
atom
A primitive cell is one, which has got the points or atoms only at the corners of the unit cell.
If a unit cell consists of more than one atom, then it is not a primitive cell.
Example for primitive cell: Simple Cubic unit cell.
Examples for non-primitive cell: BCC and FCC unit cell.
CRYSTALS SYSTEMS:
A three dimensional space lattice is generated by repeated translation of three
translational vectors a, b and c.
Crystals are grouped under seven systems on the basis of the shape of the unit cell.
The seven crystal systems are distinguished from one another by their lattice parameters.
The seven systems are,
1. Cubic 2. Tetragonal 3. Orthorhombic 4.Trigonal (rhombohedral) 5. Hexagonal 6.
Monoclinic and 7. Triclinic
The space lattices formed by unit cells are marked by the following symbols.
Primitive lattice: P → having lattice points only at the corners of the unit cell.
Body centred lattice: I → having lattice points at the corners as well as at the body centre of
the unit cell.
Face centred lattice: F → having lattice points at the corners as well as at the face centres of
the unit cell.
Base centred lattice: C → having lattice points at the corners as well as at the top and bottom
base centres of the unit cell.
BRAVAIS LATTICES

Bravais in 1948 showed that 14 types of unit cells under seven crystal systems are
possible. They are commonly called as `Bravais lattices’.

S.No. Crystal system Axial length Interfacial angles Example

1. Cubic a=b=c  =  =  = 90° NaCl, CaF2, Au, Cu

2. Tetragonal a=bc  =  =  = 90° Ordinary white, tin,

Indium, SnO2
3. Orthorhombic abc  =  =  = 90° Sulphur, Topaz, BaSO4,
KNO3
4. Monoclinic abc  =  = 90°;  Na2So4, FeSo4, Gypsum
90°
5. Triclinic abc  90° CuSo4, K2Cr2O7
6. Rhombohedral a = b = c  =  =  90° Calcite, Sb, Bi.
7. Hexagonal a=bc  =  = 90°; Quartz, Zn, Mg.
 = 120°
MILLER INDICES: The crystal lattice may be regarded as made up of an infinite set of parallel equidistant
planes passing through the lattice points which are known as lattice planes. Miller indices are defined as the
reciprocals of the intercepts made by the plane on the three crystallographic axes. In simple terms, the planes
passing through lattice points are called ‘lattice planes’.
• For a given lattice, the lattice planes can be chosen in a different number of ways.
• The orientation of planes or faces in a crystal can be described in terms of their
intercepts on the three axes. Miller introduced a system to designate a plane in a
crystal.
• He introduced a set of three numbers to specify a plane in a crystal.
• This set of three numbers is known as ‘Miller Indices’ of the concerned plane.
• Miller indices are set of three possible integers represented as (h, k, l) which is used
to designate plane in the crystal, is the reciprocal of the intercept made by the planes
on the crystallographic axes.

Procedure for finding Miller Indices

Step 1: Determine the intercepts of the plane along the axes X,Y and Z in terms of the lattice
constants a,b and c.
Step 2: Determine the reciprocals of these numbers.
Step 3: Find the least common denominator (lcd) and multiply each by this lcd.
Step 4: The result is written in parenthesis. This is called the `Miller Indices’ of the plane in the
form (h k l). This is called the `Miller Indices’ of the plane in the form (h k l).

Plane ABC has intercepts of 2 units along X-axis, 3 units along Y-axis and 2 units along
Z-axis.
DETERMINATION OF ‘MILLER INDICES’

Step 1: The intercepts are 2, 3 and 2 on the three axes.

 Step 2: The reciprocals are 1/2, 1/3 and 1/2.
Step 3: The least common denominator is ‘6’. Multiplying each reciprocal by
lcd, we get 3, 2 and 3.
Step 4: Hence Miller indices for the plane ABC is (3 2 3)
IMPORTANT FEATURES OF MILLER INDICES
For the cubic crystal especially, the important features of Miller indices are,
A plane which is parallel to any one of the co-ordinate axes has an intercept of infinity ().
Therefore the Miller index for that axis is zero; i.e. for an intercept at infinity, the
corresponding index is zero.
EXAMPLE ( 1 0 0 ) plane ( Plane parallel to Y and Z axes)

In the above plane, the intercept along X axis is 1 unit.

The plane is parallel to Y and Z axes. So, the intercepts along Y and Z axes are ‘’.
Now the intercepts are 1,  and.
The reciprocals of the intercepts are = 1/1, 1/ and 1/.
Therefore the Miller indices for the above plane is (1 0 0).

MILLER INDICES OF SOME IMPORTANT PLANES

SEPARATION BETWEEN LATTICE PLANES

Consider a cubic crystal of side ‘a’, and a plane ABC.

This plane belongs to a family of planes whose Miller indices are (h k l) because Miller
indices represent a set of planes.

Let ON =d, be the perpendicular distance of the plane A B C from the origin.
 Let 1, 1 and 1 (different from the interfacial angles,  and) be the angles between
co- ordinate axes X, Y, Z and ON respectively.

The intercepts of the plane on the three axes are,

From the figure, we have,

d1 d d
cos 1 = ,cos1 = 1 and cos1 = 1
(2)
OA OB OC

From the property of direction of cosines,

cos2 1 + cos21 + cos2 1 = 1 (3)

Using equation 1 in 2, we get,

d1h dk dl
cos1 = ,cos1 = 1 , and cos1 = 1 (4)
a a a
Substituting equation (4) in (3), we get,

2 2 2
 d1h   d1k   d1l  2 2
d1 h 2 d1 k 2 d1 l 2
2

 a  +  a  + a  = 1 + 2 + 2 =1
      a 2
a a
2
2 d1
d 1
(h 2 + k 2 + l2 ) = 1 2
(h 2 + k 2 + l2 ) = 1
a 2 a
a2 d1 = ON =
a
d1 =
2 (5)
(h 2 + k 2 + l2 ) h 2 + k 2 + l2
i.e. the perpendicular distance between the origin and the 1st plane ABC is,

a
d=
2 2 2
h +k +l
• Now, let us consider the next parallel plane.

• Let OM=d2 be the perpendicular distance of this plane from the origin.

• The intercepts of this plane along the three axes are

• 2a 2a 2a 2a
OA ' = , OB ' = , OC ' = OM = d =
2 2 2 2
h k l h +k +l

• Therefore, the interplanar spacing between two adjacent parallel planes of Miller indices
(h k l ) is given by, NM = OM – ON i.e.interplanar spacing

a
d −d =
2 1 2 2 2
h +k +l

1. Simple cubic structure (SC):

2. Body centered cubic structure (BCC):

3. Face centered cubic structure (FCC):

Properties of the Unitcell (Cubic)
1. Volume of a unit cell:
The general expression for finding the volume a unit cell is
V = abc 1− cos2  −cos2  − cos2  + 2cos cos  cos 2
1

Where a,b,c,, and  are called lattice parameters.

For cubic system a=b=c and ===900.
Therefore V= a3.

2. Co-ordination number:
It is the number of nearest neighbors directly surrounding a given atom
well within a crystal.
The co-ordination number for an atom in simple cubic structure is = 6
The co-ordination number for an atom in body centered cubic structure is =8
The co-ordination number for an atom in face centered cubic structure is =12

3. Number of atoms per unit cell:

In a unit cell atoms are at the corners, at the center of the faces and at the
center of the body.
An atom situated at the corner share 1/8th part to a unit cell.
An atom situated at the face share 1/2 part to a unit cell.
An atom situated at the center of the body share one full part to a unit cell.

1. In a simple cubic structure there are 8 corner atoms.

... Total share of all the corner atoms/unit cell = (1/8)×8 =1
... The number of atoms/unit cell in simple cube = 1
2. In a body centered cubic structure there are 8 corner atoms and an atom at
the center of the unit cell.
... Total share of all the corner atoms per unit cell = (1/8)×8 = 1
The share of an atom at the center of the body =1
... The number of atoms per unit cell in body centered cube = 1+1=2
3. In a face centered cubic structure there are 8 corner atoms and 6 face
centered atoms in a unit cell.
...total share of atoms at the corner/unit cell= (1/8) ×8=1
Total share of atoms at all the faces/unit cell = (1/2) ×6=3
... The number of atoms/unit cell in face centered cube = 1+3 = 4

4. Atomic packing factor (APF)

The fraction of the space occupied by atoms in a unit cell is known as atomic
packing factor. It is the ratio of the total volume occupied by the atoms in the unit
cell to the total available volume of the unit cell.
1. Simple cubic structure (SC):
There is only one lattice point at each of the eight corners of the unit cell. In a
simple cubic structure an atom is surrounded by six equidistant neighbours.
Hence the co-ordination number is 6. Since each atom in the corner is shared by
8 unit cells, the total number of atoms in one unit cell is (1/8) ×8 = 1

The nearest neighbour distance ‘2r’ is the distance between the centers
of two nearest neighbouring atoms.

The nearest neighbour distance 2r = a

The number of lattice points per unit cell = 1
Volume of all the atoms in a unit cell v = πr3
Volume of unit cell = V = a3 = (2r)3
v 4r 
Packing factor is P.F = = = = 0.52 = 52%
V 3 8r 3 6

2. Body centered cubic structure (BCC): In a BCC structure eight atoms

are present at eight corners and one atom is at the center. The co-ordination
number is 8. The number of atoms per unit cell is = [(1/8)×8]+1 = 2

The lattice constant is

(AB)2 = a2 + a2= 2a2

(AC)2 = (AB)2 + (BC)2

(4r)2 = 2a2 + a2 = 3a2
4r/ 3
Lattice constant a =

4 
Volume of all the atoms per unit cell v = 2   r 3 
3 
3
64r
Volume of the unit cell V = a3 =
3 3
v 8r 3  3 3 3
Atomic packing factor = = = = 0.68= 68%
V 3 64r 3 8
3. Face centered cubic structure (FCC):
In a FCC structure eight atoms are at the corners of the unit cell and six atoms
are present at the center of the six faces. The center atom is surrounded by 12
points. The co-ordination number is 12. Each corner atom is shared by 8 unit
cells and the face centered atom is shared by 2 surrounding unit cells.
... The number of atoms per unit cell is
Atomic radius of face centered cube
AB = 4r
(AB)2= a2+a2
(4r)2 = 2a2
4r
Lattice Constant a =
2
 a 2
Nearest neighbor distance 2r =
2
Volume of all the atoms in unit cell v = 4 * ( 4 / 3 ) r 3

Volume of unit cell V = a3 = 6 4 r 3 / 2  2

... The packing factor =v/V =π = 74%

Parameters SC BCC FCC

Co-ordination number 6 8 12

Atomic Radius (r)

a/ 2 3a /4 2a/ 4

Atoms per unit cell 1 2 4

 3 8 2 6
Atomic packing factor

HEXAGONAL CLOSED PACKED STRUCTURE

• It consists of three layers of atoms.

• The bottom layer has six corner atoms and one
face centred atom.
• The middle layer has three full atoms.
• The upper layer has six corner atoms and one
face centred atom.
• Each and every corner atom contributes 1/6 of
its part to one unit cell.
• The number of total atoms contributed by the corner atoms of both top and
bottom layers is 1/6  12 = 2.
• The face centred atom contributes 1/2 of its part to one unit
cell.
• Since there are 2 face centred atoms, one in the top and the
other in the bottom layers, the number of atoms contributed
by face centred atoms is 1/2 2 = 1.
• Besides these atoms, there are 3 full atoms in the middle
layer.
• Total number of atoms present in an HCP unit cell is
2+1+3 = 6.
CO-ORDINATION NUMBER (CN)
• The face centered atom touches 6 corner atoms in its plane.
• The middle layer has 3 atoms.