Scribd
Upload
20 views

Machine spcification

Uploaded by

syedasif4
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Machine spcification

Uploaded by

syedasif4
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

D) Detail Specification:-

1) TROMMEL -100 , 35ø, 16, 6/4 .

For segregation the organic waste from M.S.W trommel technology is one of the best technology
& that STD model trommel which takes care, tearing of plastic bags cutting & releases the
organic waste from plastic bag which is hidden in it. All oversize material above 100 mm will be
transfer to reject conveyor & further to hand sorting conveyor.

SR. NO. ITEM NAME TECHNICAL SPECIFICATION

1 Structure Various rolled steel sections As per IS2062 GR 2A , ISMC 125, ISMC 75
etc
2 Covers M. S Sheet , 10 , 12 & 14 Gauge
3 Drive Friction drive with Solid Rubber, rubber special grade shore hardness
90, in Both system Electric & Hydraulic.

4 Electric Motor Crompton , Hindustan , Kirloskar, KBS

5 Gear Box Worm/Helical


Make:- Elecon/PBL/WAR

6 Drive Sprocket
Electric Motor “ Pitch No. of Teeth : Duplex
Gear Box “ Pitch No. of Teeth : Duplex
7 Tyres Specially made , Heavy duty , Solid Rubber Tyres
8 Screen 100 /35/16/4 Ø mm hole Panel in 5mm thick plate
9 Ring Fabricated heavy duty

10 Surface Blasting & Pickling.


11 Length 7mts length.
12 Diameter 2200/1800/1660 mm Dia.
13 Height Around .5 mts.
14 Speed To suit the capacity.
15 Special Feature Bag cutting blades for bag tearing provision.
Fully covered heavy duty dust covers & easily replaceable screens.
Side platform with door in hood for hole cleaning.
2) CONVEYOR

This belt will supply material to trommel with consistent speed & with the result no falling of
material outside the trommel at receiving end of trammel. Shape of this conveyor will be Z type
& roller belt (trough roller) Conveyor. Oversize material will be hand shorted online.
SR.NO ITEM NAME TECHNICAL SPECIFICATION
1 Capacity TPH
2 Size C to C 14000 mm X 1000 Width (All Size Are App)*
3 M.O.C Steel plates & Structural – IS : 2062
a) Make :-SAIL, TISCO, BOKARO, BHILAI, JINDAL, MITTAL
b) All shafts : - EN8
c) Guard :-M.S Sheet 12 & 14 SWG
d) Structure :-125x65 IMSC/50x50 Angle
4 Fabrication Code As Per IS-801

5 Pulley
Drive Size Pulley a) Pulley ø322x1050 Long
Drive & Tension b) 1+1 Qty
Drive Pulley c) Diomed Rubber Bonded
Tension Pulley d) Take Up Screw Type

6 Belt NATIONAL / DUNLOP Brand


Conveyor belt tension shall be calculated bare on IS 11592 / CEMA
Three ply nylon belt top 2 mm rubber & bottom 1.5 mm thick Rubber coating
3ply means three-line sheet joined together.
7 Drive Sprocket
Electric Motor “ Pitch No. of Teeth : Duplex
Gear Box “ Pitch No. of Teeth : Duplex
8 Electric Motor Crompton , Hindustan , Kirloskar, KBS

9 Gear Box Worm/Helical


Make:- Elecon/PBL/WAR
10 Belt Speed To suit the capacity
11 Paint All steel surfaces exposed to weather will be mechanically cleaned to remove
All Rust and Scale & then 2 coats of anticorrosive zinc. Crometed Red Oxide each 20-
micron layer. Then two coat of Industrial grade Enamel paint of reputed make i.e. ASIAN,
BURGER, The Colour will be That the customer choice however our standard practices will
be two Color paints i.e. structural portion in leaf green & rest other covering in Lemon
green.
12 Bearing NTN
13 Hardware IS 1367 for guards & ducting’s
IS 1363 –SA –307 Gr. B for Bolt
(For chain fittings)
IS 1363 – SA- 563 Gr. B for Nut

You might also like