Scribd
Upload
7 views

Assignment Development of solids

Projection

Uploaded by

Asmit Singh
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
7 views

Assignment Development of solids

Projection

Uploaded by

Asmit Singh
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Rewa Engineering College, Rewa

Mechanical Engineering Departments


CS, EE, I Sem (Odd)/Session 2024-25
Classwork Assignment
(Development of Solids)
1. Draw the development of a cube of side 20 mm.
2. Draw the development of a pentagonal prism of side 25 mm and height 60mm.
3. Draw the development of a cylinder of base diameter 25 mm and height 30 mm.
4. Draw the development of a square pyramid of base side 30 mm and height 45 mm.
5. Draw the development of a cone of base diameter 50 mm and height 60 mm.
6. Draw the development of a cube of side 40 mm resting on its face with all the edges equally
inclined to VP, which is cut by a plane inclined at 300 to HP and perpendicular to VP and
passing through the cube at the top left corner of the cube.
7. A square pyramid of base side 30 mm and height 50 mm rests on its base on HP, with a base
edge parallel to VP. It is cut by a plane perpendicular to VP, 500 to HP meeting the axis 30 mm
above HP. Draw the development of the lateral surfaces.
8. A lamp shade is formed by cutting a cone of base diameter 144 mm and height 174 mm by a
horizontal plane at a distance of 72 mm from the apex and another plane inclined at 30 to HP,
passing through one of the extremities of the base. Draw the development of the shade. Draw the
development of the shade. Adopt a suitable scale.
9. A pentagonal prism of base side 30 mm and height 60 mm is cut by a plane perpendicular to
VP and 500 to HP and passing through the axis 35 mm above the base. Draw the development of
the lower portion of the solid.
10. A cylinder of diameter 40 mm, height 75 mm is cut by plane perpendicular to VP inclined at
550 to HP meeting the axis at the top face. Draw the lateral development of the solid.
11. A pentagonal pyramid of base side 25 mm and axis height 60 mm is lying on the ground on
its base such that one of the base edges is parallel to and far away from VP. It is cut by cutting
planes, one is perpendicular to VP, inclined at an angle of 40 0 to HP and meeting the axis at 14
mm from the base. The other plane is parallel to HP and perpendicular to VP meeting the axis at
a distance of 28 mm from the base. Draw the lateral surface development of the cut solid.
12. A cone of 45 mm diameter and 60mm height is cut by a horizontal plane at a distance of 15
mm from the apex and another plane inclined at 30 0 to HP and meet the axis at 15 mm above the
base. Draw the development of the cone.
13. A right regular cone of 50 mm base diameter and axis 60 mm long stands on its base on HP.
A circular hole of 12 mm radius is drilled through the axis of the cone at a height of 15 mm
above the base of the cone. The axis of the hole is perpendicular to VP. Draw the development of
the lateral surface of the cone with holes in it.
14. Draw the projections of a cone resting on the ground on its base and show on them, the
shortest path by which a point B starting from a point on the circumference of the base and
moving around the cone will return to the same point. Base of cone 61 mm diameter; axis 75 mm
long.
15. A cone, diameter of base 50 mm and axis 50 mm long is resting on its base on the H.P. It is
cut by a section plane perpendicular to the V.P., inclined at 75° to the H.P. and passing through
the apex. Draw its front view, sectional top view and true shape of the section. Draw the
projections of the cone and on it, show the line V. T. for the section plane. To determine by
generator method, the position in the top view of a given point p' in the front view of the above
cone

You might also like