TETRA Terminal CPS Programming Guide

www.hytera.com
Course Overview

1. Service engineer
Object
2. Technical support engineer

1. Basic knowledge of terminal version

Content 2. Function configuration via CPS

1. Understand the terminal version difference

Goal 2. Grasp the key configuration steps of main function

Period: 2 hours
Contents

1 Software Overview

2 TMO Function Configuration

3 DMO Function Configuration

4 Optional Function Configuration

 Software Overview

Hardware Version

Firmware Version

CPS Installation

CPS Software Menu

Hardware and Firmware Version Description

 Firmware Version
Default version here refers to the firmware version that is burned into the terminal at factory.
It can be identified by the label. As shown in the following label:
“xx.xx.xxx” in the software version number.
“Vx.xx.xx.xxx” stands for the firmware version.
CPS Introduction

 CPS Installation
1. Double click “Setup.exe”, and click “Next”.
CPS Introduction

 CPS Installation
2. Choose USB driver and language to finish the installation.
CPS Introduction

 Connection Between Radio and PC

Portable radio programming cable Programming cable

PC36，MN.：4211200001500 Radio Computer

Radio

Mobile radio programming cable PC35， Programming cable

MN.： 4211200001600 Computer
CPS Introduction

 CPS Main Interface

Frequently used shortcuts

Configuration window

Navigation menu
CPS Introduction

 CPS Frequently Used Button Description

Keyboard
Operation Name Description
Shortcut

Open Open the data files reserved on the computer for configuration. Ctrl+ O

Read Data from Open the "Reading Progress" dialog box to read the data from the
/
Terminal terminal.
Write Data to Open the "Writing Progress" dialog box to write the configured data to the
/
Terminal terminal.
Communication Select your desired port. After the port is selected, click OK. Then data will
/
Port be transmitted between the PC and the terminal via the selected port.

Help Topics View help topics for CPS. /

More Provides the common functions, such as updating MMI picture resource,
/
Operations writing JAVA files, etc.
Contents

1 Software Overview

2 TMO Function Configuration

3 DMO Function Configuration

4 Optional Function Configuration

Service Overview

 Function under TMO

• Status Message
• User Message
• Individual Call • Flash Message • Authentication
• Group Call
• Stun/Kill
• Telephone Call
• Air Interface Encryption
• Emergency Call
• E2EE Security Services
• Broadcast Call
• DGNA
• PSTN/PABX Call
• Man Down
Date Service • Lone Worker

Voice Service Security Services

Before Configuration

 Ender programming mode

There are two ways to enter the programming mode:

 1: Input “*#03#” immediately when radio appears “Hytera” logo after power-on.

 2: Click the “Read” icon in CPS, restart the radio manually, then it will enter programming
mode automatically (please don’t disconnect the programming cable).
TMO Function Configuration

 Network Registration

1. Configure TMO User ID

2. Configure Networks

3. Configure TMO Frequency list

TMO Function Configuration

 Network Registration
1. Configure TMO User ID
Go to "TMO -> TMO Basic Settings -> TMO User ID”, input ISSI Number, which is provided by
system administrator.
TMO Function Configuration

 Network Registration
2. Configure TMO Network
Go to "TMO -> TMO Basic Settings -> TMO Networks”, input Network Name / Mcc / Mnc, which
is provided by system administrator.
TMO Function Configuration

 Network Registration
There are three frequency lists in TMO:

 TMO Fixed Frequency List

 TMO Scan Frequency List

 TMO Last Frequency List

TMO Function Configuration

 Network Registration
3. Configure TMO Fixed Frequency List
Go to “TMO -> TMO Basic Settings -> TMO Frequency List -> TMO Fixed Frequency List/TMO Scan
Frequency List”, input Frequency and choose Duplex spacing.
TMO Function Configuration

 Network Registration-Optional
3. Configure TMO Scan Frequency List
Go to “TMO -> TMO Basic Settings -> TMO Frequency List -> TMO Scan Frequency List”, input
Frequency and choose Duplex spacing.
Frequency range = Frequency step * Channel Total
Frequency step = Channel step * 25(KHz)
TMO Function Configuration

 Network Registration-Optional
3. TMO Last Frequency List
Go to “TMO -> TMO Basic Settings -> TMO Frequency List -> TMO Scan Frequency List”.
The frequencies are automatically recorded by the terminal.
TMO Function Configuration

 Group Call Configuration

1. Configure Group name and ID

2. Configure Background Group Folder

3. Configure Static Group Folder

TMO Function Configuration

 Group Call Configuration

1. Configure Group name and ID
Go to “TMO -> TMO Group -> TMO Group List”, add Group name and ID.
Choose the scan priority--Class of Usage.
TMO Function Configuration

 Group Call Configuration

2. Configure Background Group Folder
Go to “TMO -> TMO Folder -> TMO BG Folder”, click “add”.
TMO Function Configuration

 Group Call Configuration

2. Configure Background Group Folder
Go to “TMO -> TMO Folder -> TMO BG Folder”, choose Group.
TMO Function Configuration

 Group Call Configuration

2. Configure Background Group Folder
Go to “TMO -> TMO Folder -> TMO BG Folder”, Choose Group.
TMO Function Configuration

 Group Call Configuration

3. Configure Static Group Folder
Go to “TMO -> TMO Folder -> Folder List”, add new Folder.
Set as selected group folder.
Set as scan group folder.
TMO Function Configuration

 Group Call Configuration

3. Configure Static Group Folder
Go to “TMO -> TMO Folder -> Folder List”, after add new Folder, choose Group members.
TMO Function Configuration

 Group Call Configuration

3. Configure Static Group Folder
Go to “TMO -> TMO Folder -> Folder List”, after add new Folder, choose Group members, set
group features.
TMO Function Configuration

 Telephone Call Configuration

1. Configure TMO Gateway
Go to “TMO -> TMO Basic Settings ->TMO Gateway->TMO PABX/PSTN”. With this terminal, you can
initiate a telephone call to a PABX or PSTN subscriber outside the TETRA network.
TMO Function Configuration

 Emergency Call Configuration

1. Configure Emergency Mode

2. Configure Emergency Call Type

3. Configure Other features

TMO Function Configuration

 Emergency Call Configuration

1. Configure Emergency Mode
Go to “TMO -> TMO Voice Service->TMO Emergency Function”.
TMO Function Configuration

 Emergency Call Configuration

2. Configure Emergency Call Type
Go to “TMO -> TMO Voice Service->TMO Emergency Function”.
TMO Function Configuration

 Emergency Call Configuration

3. Configure Other features
Go to “TMO -> TMO Voice Service->TMO Emergency Function”.
TMO Function Configuration

 Broadcast Call Configuration

Go to “TMO -> TMO Voice Service->TMO Broadcast call”, enable the feature, input the broadcast
call ID.
TMO Function Configuration

 Status Message Configuration

Status Message
Go to “Status message”, edit the ID and contents.
TMO Function Configuration

 User & Flash Message Configuration

User Message
Users can edit a text message and send it to a target contact.

Flash Message
If the message is sent as a flash message, the receiving party can preview all the content in a
predefined time period without any operation.
Contents

1 Terminal Version and CPS

2 TMO Function Configuration

3 DMO Function Configuration

4 Optional Function Configuration

DMO Function

Individual
Call
Status
Message

Group Call

User
Message
Emergency
Call
DMO Function Configuration

 Group Call Configuration

1. Configure DMO User ID

2. Configure DMO Networks

3. Configure DMO Frequency List

4. Configure DMO Group List

5. Configure DMO Folder

DMO Function Configuration

 Group Call Configuration

1. Configure DMO User ID
Go to “DMO -> DMO Basic Settings -> DMO User ID”, input ISSI Number.
DMO Function Configuration

 Group Call Configuration

2. Configure DMO Networks
Go to "DMO -> DMO Basic Settings -> DMO Networks”, input Network Name / Mcc / Mnc.
DMO Function Configuration

 Group Call Configuration

3. Configure DMO Frequency List
Go to “DMO -> DMO Basic Settings -> DMO Frequency List”, input Frequency.
DMO Function Configuration

 Group Call Configuration

4. Configure DMO Group List
Go to “DMO -> DMO Group -> DMO Group List”, add Group name and ID, choose the Index.
DMO Function Configuration

 Group Call Configuration

5. Configure DMO Folder
Go to “DMO -> DMO Folder -> Folder List”, add static group folder and choose Group members.
DMO Function Configuration

 DMO Emergency Function Configuration

In emergency, you can initiate an emergency call to the designated contact for help. The
emergency call enjoys the highest priority and can interrupt any call with lower priority.
DMO Function Configuration

 Message Configuration
1. Edit the status messages.

2. User Message: users can edit a text message and send it to a target contact.
Contents

1 Terminal Version and CPS

2 TMO Function Configuration

3 DMO Function Configuration

4 Optional Function Configuration

Optional Function and Features

Language
Power
Selection
Shortcut Keys

Call Features

Manu

Lone Worker

Man Down Positioning

TX Power Selection

 Power Setting
Go to “Power Setting”, select the MAX. TX Power.
TMO Common Call Features

 Common Call Setting

Go to “TMO -> TMO Voice Service-> TMO Common Call-> Common Call ”, set call priority.
TMO Common Call Features

 Common Call Setting

Go to “TMO -> TMO Voice Service-> TMO Common Call-> Common Call ”, set TX demand priority.
TMO Common Call Features

 Common Call Setting

Go to “TMO -> TMO Voice Service-> TMO Common Call-> Call Modification ”, select Signaling and
Mode.
Security Configuration

 Lone Worker
Go to “Security -> Lone Worker”, enable the function.
Security Configuration

 Man Down
Go to “Security -> Man Down”, enable the function.
User Setting

 Language Setting
Go to “User Setting -> Language”, select language.
User Setting

 Voice Tone Setting

Go to “User Setting -> Voice”, select voice tone.
User Setting

 Programming Key Setting

Go to “User Setting -> Auxiliary Setting-> Shortcut”, select shortcut function of programming key.
User Setting

 Auxiliary Setting
Go to “User Setting -> Auxiliary Setting-> Other”, enable Indication.
Operational Menu Configuration

 Menus Setting
Go to “User Setting -> Menu/MMI Menu”, select the menu displayed on the screen.
Positioning Configuration

 System Setting
Go to “User Setting -> Positioning”, select the positioning system.
Positioning Configuration

 Location Share
Terminal can send its location information to the control center or system.
Positioning Configuration

 Location Share
Terminal can send its location information to the control center or system.
Positioning Configuration

 Location Share
Terminal can send its location information to the control center or system.
Contact Us
Hytera Communications Co.,Ltd.
Adds: Hytera Tower, Shenzhen Hi-Tech Industrial Park North,
Beihuan RD.9108#, Nanshan District, Shenzhen, P.R.C.
Service Hotline: +86-755-86137081
Service Email: [email protected]
Stock code: 002583