Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations

Phone: +49 (0)2303 332 33-0 with the CAE-System

Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 1
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

EXPLANATIONS PROVIDED BY THE USER :

-----------------------------------

CCC ************************************************************ CCC

CCC Load case : Operation CCC
CCC ************************************************************ CCC
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 2
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

I N P U T R E C O R D STRUCTURE CALCULATION
================================

CALCULATION OF STATIC LOAD CASES WITH NONLINEAR BOUNDARY CONDITIONS

with program ROHR2 Version 34.1

Units for the internal calculation are: m,kN,t,s

The printed values are printed with their units
UNIT-factor inputs are considered therin

The calculation is based on right handed coordinate systems

The absolute coordinate system applies for inputs and results if
there are no references to other coordinate systems, e.g.
SPECIFIC CS: Details of 3 points
LOCAL CS: Index i
The local CS is that of the principal axes of the sections
The Xi-axis always points in the direction of the line
The Yi- and Zi- axes are determined by the program for pipes
For other sections they are determined by the user

The structure calculation is based on a framework,

which is calculated n o n l i n e a r l y
Maximum no. of Iterations 100
permitted inaccuracy 0.1000 %

The orientation in the framework is given by lines and points

Lines and points have names with a maximum of 4 characters
A line is a frame passing over several points
The order of points determines the direction of the line

SYSTEM INPUTS FOR STRUCTURE CALCULATION

---------------------------------------

General instructions for calculation of frameworks:

k-Factors acc. to ASME B31.4

Youngs modulus EW from ET-inputs being used

Assembly temperature = 15.0 degree C

Used material file(s) identifier

D:\98_TRANSFER\Nova mapa (96)\ROHR2.MAT UL

File output: ERGFI= temp2.erg

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 3
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPELINE NAMES
--------------
Line Node1 Node2 Pipeline

1 - - 376-4"-PK-310-B01F01A-IH-New
2 - - 376-4"-PK-310-B01F01A-IH-New
3 1735 1335 376-4"-PK-310-B01F01A-IH-New
3 1335 1435 376-4"-PK-311-B01F01A-PP-New
4 - - 376-4"-PK-310-B01F01A-IH-New
5 - - 376-4"-PK-310-B01F01A-IH-New
6 - - 376-4"-PK-310-B01F01A-IH-New
7 - - 376-4"-PK-310-B01F01A-IH-New
8 - - 376-4"-PK-310-B01F01A-IH-New
9 - - 376-4"-PK-310-B01F01A-IH-New
10 1301 1437 376-4"-PK-310-B01F01A-IH-New
10 1437 N5 376-4"-PK-318-B01F01A-IH-New
10 N5 9129 E-031
11 - - 376-4"-PK-318-B01F01A-IH-New
12 - - 376-4"-PK-310-B01F01A-IH-New
13 - - 376-4"-PK-310-B01F01A-IH-New
14 - - 376-4"-PK-310-B01F01A-IH-New
15 - - 376-4"-PK-318-B01F01A-IH-New
16 - - 376-4"-PK-318-B01F01A-IH-New
17 - - E-031
18 - - E-031
19 9125 N1 E-031
19 N1 1819 376-8"-PF-302-B01F01A-IH-New
19 1819 ~498 TIP-003/376-8"-PF-317-B01F01A-New
19 ~498 C943 376-8"-PF-004A-B01F01A-IH-Existing
20 C943 C941 376-8"-PF-004A-B01F01A-IH-Existing
20 C941 B929 376-6"-PL-013-B01F01A-IH-Existing
21 - - 376-6"-PL-013-B01F01A-IH-Existing
22 9137 N6 E-031
22 N6 S77 376-4"-PK-312-B01F01A-PP-New
23 - - 376-4"-PK-312-B01F01A-PP-New
24 9567 1577 376-4"-PK-312-B01F01A-PP-New
24 1577 1341 376-4"-PK-311-B01F01A-PP-New
25 - - 376-4"-PK-310-B01F01A-IH-New
26 9131 N2 E-031
26 N2 ~496 376-8"-PF-306-B01F01A-IH-New
26 ~496 227 TIP-004/376-8"-PF-318-B01F01A-New
26 227 N3 376-8"-PF-004B-B01F01A-IH-Existing
26 N3 9111 E-001
27 205 117 376-8"-PF-306-B01F01A-IH-New
27 117 71 376-2"-PF-307-B01F01A-IH-New
27 71 69 376-2"-BD-310-A01G25A-IH-New
28 - - E-001
29 - - E-001
30 - - 376-2"-PF-307-B01F01A-IH-New
31 - - E-001
32 - - E-031
33 - - E-031
34 - - 376-8"-PF-004A-B01F01A-IH-Existing
35 - - 376-8"-PF-004A-B01F01A-IH-Existing
36 1435 N12 376-4"-PK-311-B01F01A-PP-New
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 4
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPELINE NAMES
--------------
Line Node1 Node2 Pipeline

36 N12 N11 EA-029

36 N11 1685 376-4"-PK-311-B01F01A-PP-New
37 - - 376-4"-PK-311-B01F01A-PP-New
38 - - 376-4"-PK-311-B01F01A-PP-New
39 101 159 376-2"-PF-307-B01F01A-IH-New
39 159 163 376-2"-BD-310-A01G25A-IH-New
40 73 51 376-2"-PF-307-B01F01A-IH-New
40 51 25 376-2"-BD-310-A01G25A-IH-New
40 25 T067 TIP-067-376-36"-BD-318-A01G25A-New
41 - - 376-2"-PF-307-B01F01A-IH-New
42 - - 376-18"-BD-108-A01G25A-PP-Existing
43 - - 376-2"-BD-310-A01G25A-IH-New
44 - - E-001
45 - - E-001
46 - - 376-4"-PK-311-B01F01A-PP-New
47 - - 376-2"-BD-310-A01G25A-IH-New
48 - - 376-2"-BD-310-A01G25A-IH-New
49 - - 376-2"-BD-310-A01G25A-IH-New
50 - - 376-3"-PF-310-A01F01A-New
51 - - 376-3"-PF-310-A01F01A-New
52 907 ~110 376-3"-PF-310-A01F01A-New
52 ~110 855 376-3"-PF-308-A01F01A-New
53 - - 376-3"-PF-310-A01F01A-New
54 855 ~108 376-3"-PF-308-A01F01A-New
54 ~108 N13 376-3"-PF-309-A01F01A-New
55 - - 376-3"-PF-309-A01F01A-New
56 - - 376-3"-PF-308-A01F01A-New
57 - - 376-3"-PF-309-A01F01A-New
58 - - 376-3"-PF-310-A01F01A-New
59 - - 376-3"-PF-308-A01F01A-New
60 - - 376-3"-PF-309-A01F01A-New
61 - - 376-3"-PF-313-A01F01A-New
62 - - 376-3"-PF-313-A01F01A-New
63 - - 376-3"-PF-313-A01F01A-New
64 - - 376-3"-PF-313-A01F01A-New
65 - - 376-3"-PF-313-A01F01A-New
66 - - 376-3"-PF-313-A01F01A-New
67 - - 376-3"-PF-313-A01F01A-New
68 - - 376-3"-PF-313-A01F01A-New
69 S164 577 376-3"-PF-313-A01F01A-New
69 577 451 376-4"-PF-303-A01F01A-New
70 451 ~263 376-4"-PF-303-A01F01A-New
70 ~263 503 TIP-052/376-6"-PF-320-A01F01A-New
71 503 803 TIP-052/376-6"-PF-320-A01F01A-New
71 803 ~590 376-6"-PF-012-A01F01A-IH-MODIFY-New
71 ~590 7865 TIP-340/376-6"-PF-322-A01F01A-IH-New
71 7865 N4 376-6"-PF-012B-A01F00A-IH-Existing
71 N4 9445 V-003
72 7819 7817 376-6"-PF-012B-A01F00A-IH-Existing
72 7817 BC15 376-3"-PF-016-A01F00A-IH-Existing
73 - - 376-3"-PF-313-A01F01A-New
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 5
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPELINE NAMES
--------------
Line Node1 Node2 Pipeline

74 - - 376-3"-PF-313-A01F01A-New
75 - - 376-4"-PF-303-A01F01A-New
76 503 805 TIP-052/376-6"-PF-320-A01F01A-New
76 805 BC02 376-6"-PF-012-A01F00A-IH-Existing
77 - - 376-6"-PF-012-A01F00A-IH-Existing
78 - - 376-3"-PF-016-A01F00A-IH-Existing
79 - - 376-3"-PF-313-A01F01A-New
80 - - 376-3"-PF-313-A01F01A-New
81 435 505 376-4"-PF-303-A01F01A-New
81 505 BC08 376-3"-PF-305-A01F01A-New
82 385 383 376-4"-PF-303-A01F01A-New
82 383 BC07 376-3"-PF-304-A01G01A-New
83 - - 376-4"-PF-303-A01F01A-New
84 3957 4017 376-6"-PF-012-A01F00A-IH-Existing
84 4017 SE47 376-3"-PF-013-A01F00A-IH-Existing
85 3445 3443 376-6"-PF-012-A01F00A-IH-Existing
85 3443 3469 376-2"-PF-034-A01F00A-IH-Exits
85 3469 3471 376-8"-PF-001-A01F00A-IH-Existing
86 3421 263 376-2"-PF-034-A01F00A-IH-Exits
86 263 249 TIP-001/376-2"-PF-315-B01F01A-New
87 BC03 3539 376-8"-PF-001-A01F00A-IH-Existing
87 3539 3541 376-10"-PF-001-A01F00A-IH-Existing
88 249 9011 TIP-001/376-2"-PF-315-B01F01A-New
88 9011 ~677 376-2"-PF-035-A01F00A-IH-MODIFY-Exist
88 ~677 3407 376-2"-PF-035-A01F00A-IH-Exist
88 3407 3409 376-10"-PF-002-A01F00A-IH-Existing
89 BC01 3551 376-10"-PF-002-A01F00A-IH-Existing
89 3551 1105 376-10"-PF-001-A01F00A-IH-Existing
89 1105 1107 TIP-002/376-8"-PF-316-B01F01A (PID-A01F0
89 1107 N17 376-10"-PF-001-A01F00A-IH-Existing
89 N17 9417 V-001
90 - - V-003
91 - - V-003
92 - - 376-3"-PF-305-A01F01A-New
93 - - 376-3"-PF-304-A01G01A-New
94 249 239 TIP-001/376-2"-PF-315-B01F01A-New
94 239 9429 376-2"-PF-315-B01F01A-IH-New
94 9429 281 376-4"-PF-301-B01F01A-IH-New
95 - - 376-2"-PF-315-B01F01A-IH-New
96 1091 1079 TIP-002/376-8"-PF-316-B01F01A (PID-A01F0
96 1079 1067 376-4"-PF-324-A01F01A-IH-New
96 1067 BC04 376-4"-PF-301-B01F01A-IH-New
97 - - V-001
98 - - V-001
99 - - 376-4"-PF-301-B01F01A-IH-New
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 6
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 1

ST N8 Support Anchorpoint
PT N8 Straight on
ZE N8 Additional results
Straight on
EM A117 Point mass (kg) MWX= 0.9000 MWY= 0.9000 MWZ= 0.9000 0. 0.016
PT 1787 Straight on 0. 0.010
PT 1785 Straight on 0. 0.044
PT 9459 Straight on 0. 0.044
PT 1781 Bend R= 0.038m K= 1.98 90. 0.203
AR S96 Ext. friction support 0. 0.524
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 4462.507
PT 1779 Bend R= 0.038m K= 1.98 90. 0.524
PT 1777 Bend R= 0.038m K= 1.98 90. 0.164
AR S95 Ext. friction support 0. 0.762
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 4462.507
PT 1775 Straight on 0. 0.762
PT 1773 Straight on 0. 0.076
PT 1771 Bend R= 0.038m K= 1.98 90. 0.185
PT 1769 Straight on 0. 0.180
TF $000 TWA-branch spring (STIFF) 0.092
PT 1735 Coupling with line 2 0.054

L i n e 2

PT 1735 Coupling with line 1

PT 1733 Coupling with line 4 0. 0.100
PT 1731 Coupling with line 14 0. 0.200
EM ~307 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.102
PT 1729 Straight on 0. 0.084
PT 1727 Straight on 0. 0.365
EM ~306 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 1725 Coupling with line 14 0. 0.102
PT 9237 Straight on 0. 0.100
PT 9205 Bend R= 0.152m K= 5.22 45. 0.063
AR S97 Ext. friction support 180. 0.063
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 52257.96
PT ~772 Angle 180. 0.000
PT 9203 Bend R= 0.152m K= 5.22 45. 0.063
PT 1721 Bend R= 0.152m K= 5.22 90. 0.908
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 7
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 1709 Coupling with line 9 0. 0.457

PT 1711 Bend R= 0.152m K= 5.22 90. 0.265
PT 1713 Straight on 0. 0.302
PT 1715 Straight on 0. 0.051
PT 1717 Straight on 0. 0.051
EM A035 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
ZE N7 Additional results
Straight on 0.078
PT N7 Straight on
ST N7 Support Anchorpoint

L i n e 3

PT 1735 Coupling with line 2

AR S66 Ext. friction support 0. 0.450
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -4.0 4.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 52257.96
PT 9209 Bend R= 0.152m K= 4.30 90. 0.274
EM 9235 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.154
PT 1745 Straight on 0. 0.084
PT 1747 Straight on 0. 0.331
EM ~316 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 1749 Bend R= 0.152m K= 5.22 90. 1.248
AR S65 Ext. friction support 0. 3.002
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 52257.96
PT 1229 Straight on 0. 2.240
PT 1187 Coupling with line 5 0. 0.105
PT 1235 Straight on 0. 0.105
PT 1237 Bend R= 0.152m K= 5.22 90. 1.947
HR S64 Friction Hanger 0. 0.806
Hanger direction RIH= +WZ
Hanger length LH= 1.099 m
Spring constant CH= 1.0E+20 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT S47 Straight on 0. 3.401
PT 1241 Bend R= 0.152m K= 5.22 90. 0.673
PT 1243 Bend R= 0.152m K= 5.22 90. 1.108
PT 1245 Bend R= 0.152m K= 5.22 90. 0.504
AR S63 Ext. friction support 0. 1.152
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -20.0 20.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 8
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S62 Ext. friction support 0. 5.780

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
PT 1247 Bend R= 0.152m K= 5.22 90. 0.522
PT 1249 Bend R= 0.152m K= 5.22 90. 0.503
PT 1251 Bend R= 0.152m K= 5.22 90. 0.479
PT 1253 Bend R= 0.152m K= 5.22 90. 0.883
HR S61 Friction Hanger 0. 0.252
Hanger direction RIH= +WZ
Hanger length LH= 0.872 m
Spring constant CH= 1.0E+20 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT S46 Straight on 0. 1.639
PT 1257 Bend R= 0.152m K= 5.22 90. 2.369
PT 1259 Bend R= 0.152m K= 5.22 90. 3.720
AR S60 Ext. friction support 0. 0.740
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S59 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S58 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S57 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S55 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S54 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 9
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S53 Ext. friction support 0. 6.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S52 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S51 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S49 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S48 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S45 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT S34 Straight on 0. 3.000
AR S44 Ext. friction support 0. 2.999
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1285 Bend R= 0.152m K= 5.22 90. 1.288
AR S43 Ext. friction support 0. 2.968
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 60.0 µYX=0.300 µZX=0.300 52257.96
Y -15.0 15.0 µXY=0.300 µZY=0.300 52257.96
PT 1287 Bend R= 0.152m K= 5.22 90. 2.503
PT 1289 Bend R= 0.152m K= 5.22 90. 0.680
AR S42 Ext. friction support 0. 3.497
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -10.0 10.0 µYX=0.300 µZX=0.300 52257.96
Y -20.0 20.0 µXY=0.300 µZY=0.300 52257.96
PT 1291 Bend R= 0.152m K= 5.22 90. 1.034
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 10
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

HR S41 Friction Hanger 0. 1.000

Hanger direction RIH= +WZ
Hanger length LH= 1.300 m
Spring constant CH= 16.600 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT S33 Straight on 0. 2.237
PT A055 Straight on 0. 0.831
PT 1295 Bend R= 0.152m K= 5.22 90. 1.507
PT 1297 Bend R= 0.152m K= 5.22 90. 0.947
AR S40 Ext. friction support 0. 0.513
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
PT 1299 Straight on 0. 0.200
PT 1301 Coupling with line 10 0. 0.105
PT 1303 Straight on 0. 0.105
EM ~347 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 1.896
PT 1305 Straight on 0. 0.084
PT 1307 Straight on 0. 0.314
EM ~348 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 9239 Bend R= 0.152m K= 5.22 45. 0.665
PT ~774 Angle 180. 0.063
AR S39 Ext. friction support 180. 0.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 52257.96
PT 9241 Bend R= 0.152m K= 5.22 45. 0.063
PT 9255 Straight on 0. 0.063
PT 1311 Coupling with line 7 0. 0.099
PT 1313 Straight on 0. 0.100
PT 1315 Straight on 0. 0.051
PT 1317 Straight on 0. 0.051
EM A032 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
PT 1319 Straight on 0. 0.078
PT 1321 Straight on 0. 0.327
EM A033 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.078
PT 1323 Straight on 0. 0.002
PT 1325 Straight on 0. 0.051
PT 1327 Straight on 0. 0.051
PT 1329 Coupling with line 12 0. 0.100
PT 9245 Bend R= 0.152m K= 5.22 45. 0.263
PT ~775 Angle 180. 0.063
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 11
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S38 Ext. friction support 180. 0.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 52257.96
PT 9247 Bend R= 0.152m K= 5.22 45. 0.063
PT 9257 Straight on 0. 0.063
EM ~346 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.602
PT 1333 Straight on 0. 0.084
PT 1335 Straight on 0. 0.314
EM ~358 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 1339 Straight on 0. 2.015
PT 1341 Coupling with line 24 0. 0.105
PT 1343 Straight on 0. 0.105
AR S37 Ext. friction support 0. 0.200
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
PT 1345 Bend R= 0.152m K= 5.23 90. 0.394
PT ~757 Angle 180. 0.152
PT 1347 Angle 180. 0.001
PT 1349 Bend R= 0.152m K= 5.23 90. 0.153
PT 1351 Bend R= 0.152m K= 5.23 90. 1.942
PT A054 Straight on 0. 1.200
PT S30 Straight on 0. 0.831
HR S36 Friction Hanger 0. 2.239
Hanger direction RIH= +WZ
Hanger length LH= 1.300 m
Spring constant CH= 33.300 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT 1 Bend R= 0.152m K= 5.23 90. 1.000
AR S35 Ext. friction support 0. 1.034
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -10.0 10.0 µYX=0.300 µZX=0.300 52257.96
Y -20.0 20.0 µXY=0.300 µZY=0.300 52257.96
AR S29 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 60.0 µYX=0.300 µZX=0.300 52257.96
Y -15.0 15.0 µXY=0.300 µZY=0.300 52257.96
PT 1361 Bend R= 0.152m K= 5.23 90. 2.181
PT 1363 Bend R= 0.152m K= 5.23 90. 0.380
PT 1365 Bend R= 0.152m K= 5.23 90. 0.686
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 12
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S32 Ext. friction support 0. 1.787

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT S27 Straight on 0. 3.000
AR S31 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S28 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S26 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S25 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S24 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S23 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S22 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S21 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S20 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 13
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S19 Ext. friction support 0. 3.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S18 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S17 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S16 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S15 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S14 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S13 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S12 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S11 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S10 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S9 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 14
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S8 Ext. friction support 0. 3.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S7 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S6 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S5 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1419 Bend R= 0.152m K= 5.23 90. 2.677
PT 1421 Bend R= 0.152m K= 5.23 90. 0.741
AR S4 Ext. friction support 0. 0.310
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S3 Ext. friction support 0. 2.597
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S2 Ext. friction support 0. 3.412
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -30.0 0.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1427 Bend R= 0.152m K= 5.23 90. 2.095
AR S1 Ext. friction support 0. 1.500
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 52257.96
PT 1429 Bend R= 0.152m K= 5.23 90. 5.496
PT 1431 Bend R= 0.152m K= 5.23 90. 0.502
PT 1433 Straight on 0. 1.752
TF $001 TFS-branch spring (STIFF) 0.051
PT 1435 Coupling with line 36 0.054

L i n e 4

PT 1733 Coupling with line 2

TF $002 TWA-branch spring (STIFF) 0.054
PT 1763 Straight on 0. 0.092
PT 1765 End point 0.076
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 15
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 5

PT 1187 Coupling with line 3

TF $003 TFS-branch spring (STIFF) 0.054
PT 1185 Straight on 0. 0.051
EM ~300 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 1.143
PT 1183 Straight on 0. 0.084
PT 1181 Straight on 0. 0.331
EM 9227 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 9221 Bend R= 0.152m K= 4.30 90. 0.154
AR S91 Ext. friction support 0. 0.281
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -4.0 4.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 52257.96
PT 1171 Coupling with line 6 0. 0.450
PT 1169 Coupling with line 8 0. 0.100
PT 1167 Coupling with line 25 0. 0.200
EM ~291 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.102
PT 1165 Straight on 0. 0.084
PT 1163 Straight on 0. 0.365
EM ~290 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 1161 Coupling with line 25 0. 0.102
PT 9229 Straight on 0. 0.096
PT 9217 Bend R= 0.152m K= 5.22 45. 0.063
AR S94 Ext. friction support 180. 0.063
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 52257.96
PT ~773 Angle 180. 0.000
PT 9215 Bend R= 0.152m K= 5.22 45. 0.063
PT 1157 Bend R= 0.152m K= 5.22 90. 0.908
PT 1145 Coupling with line 13 0. 0.461
PT 1147 Bend R= 0.152m K= 5.22 90. 0.268
PT 1149 Straight on 0. 0.302
PT 1151 Straight on 0. 0.051
PT 1153 Straight on 0. 0.051
EM A036 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
ZE N9 Additional results
Straight on 0.078
PT N9 Straight on
ST N9 Support Anchorpoint

L i n e 6

PT 1171 Coupling with line 5

TF $004 TWA-branch spring (STIFF) 0.054
PT 1207 Straight on 0. 0.092
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 16
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 1209 Bend R= 0.038m K= 1.98 90. 0.173

PT 1211 Straight on 0. 0.185
PT 1213 Straight on 0. 0.076
AR S92 Ext. friction support 0. 0.761
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 4462.507
PT 1215 Bend R= 0.038m K= 1.98 91. 0.761
PT 9455 Bend R= 0.038m K= 1.98 90. 0.164
AR S93 Ext. friction support 0. 0.524
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 4462.507
PT 1217 Bend R= 0.038m K= 1.98 90. 0.524
PT 9457 Straight on 0. 0.203
PT 1223 Straight on 0. 0.044
PT 356 Straight on 0. 0.044
EM A116 Point mass (kg) MWX= 0.9000 MWY= 0.9000 MWZ= 0.9000 0. 0.010
ZE N10 Additional results
Straight on 0.016
PT N10 Straight on
ST N10 Support Anchorpoint

L i n e 7

PT 1311 Coupling with line 3

TF $005 TWA-branch spring (STIFF) 0.054
PT 1565 Straight on 0. 0.092
PT 1567 End point 0.076

L i n e 8

PT 1169 Coupling with line 5

TF $006 TWA-branch spring (STIFF) 0.054
PT 1201 Straight on 0. 0.092
PT 1203 End point 0.076

L i n e 9

PT 1709 Coupling with line 2

TF $007 TTU-branch spring (STIFF) 0.054
PT 1707 Straight on 0. 0.092
PT 1705 End point 0.060

L i n e 10

PT 1301 Coupling with line 3

TF $008 TFS-branch spring (STIFF) 0.054
PT 1437 Straight on 0. 0.051
PT 1439 Bend R= 0.152m K= 5.22 90. 0.352
EM ~425 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 2.001
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 17
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 1441 Straight on 0. 0.084

PT 1443 Straight on 0. 0.314
EM ~426 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT A046 Bend R= 0.152m K= 5.22 45. 0.665
ST S78 Support Anchorpoint 0. 0.063
PT A047 Bend R= 0.152m K= 5.22 45. 0.063
PT 1447 Coupling with line 11 0. 0.163
PT 1449 Straight on 0. 0.100
PT 1451 Straight on 0. 0.051
PT 1453 Straight on 0. 0.051
EM A040 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
PT 1455 Straight on 0. 0.078
PT 1457 Straight on 0. 0.326
EM A041 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.078
PT 1459 Straight on 0. 0.002
PT 1461 Straight on 0. 0.051
PT 1463 Straight on 0. 0.051
PT A049 Bend R= 0.152m K= 5.22 90. 0.352
EM ~427 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.754
PT 1467 Straight on 0. 0.084
PT 1469 Straight on 0. 0.314
EM ~428 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 1471 Bend R= 0.152m K= 5.22 90. 0.759
AR S79 Ext. friction support 0. 0.778
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -4.0 4.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 52257.96
PT 1475 Bend R= 0.152m K= 5.22 90. 1.081
PT 1477 Bend R= 0.152m K= 5.22 90. 1.839
HR S80 Friction Hanger 0. 3.175
Hanger direction RIH= +WZ
Hanger length LH= 1.000 m
Spring constant CH= 1.0E+20 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT S71 Straight on 0. 1.741
PT 1481 Bend R= 0.152m K= 5.22 90. 0.780
PT 1483 Bend R= 0.152m K= 5.22 90. 1.561
AR S82 Ext. friction support 0. 0.729
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1487 Bend R= 0.152m K= 5.22 90. 1.550
PT 1489 Bend R= 0.152m K= 5.22 90. 0.454
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 18
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S83 Ext. friction support 0. 2.950

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -1.0 1.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1493 Bend R= 0.152m K= 5.22 90. 4.036
PT ~759 Angle 179. 0.152
PT 1495 Angle 179. 0.001
PT 1497 Bend R= 0.152m K= 5.22 90. 0.152
AR S84 Ext. friction support 0. 0.464
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1501 Bend R= 0.152m K= 5.22 90. 1.534
PT 1503 Bend R= 0.152m K= 5.22 90. 2.666
AR S85 Ext. friction support 0. 0.466
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1507 Bend R= 0.152m K= 5.22 90. 0.931
PT 1509 Bend R= 0.152m K= 5.22 90. 0.441
AR S86 Ext. friction support 0. 2.370
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S87 Ext. friction support 0. 2.998
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1513 Bend R= 0.152m K= 5.22 90. 0.458
AR S88 Ext. friction support 0. 2.069
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1517 Bend R= 0.152m K= 5.22 90. 1.055
PT 1519 Bend R= 0.152m K= 5.22 90. 1.106
AR S89 Ext. friction support 0. 3.882
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -1.0 1.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1521 Bend R= 0.152m K= 5.22 90. 1.044
PT 1523 Bend R= 0.152m K= 5.22 90. 0.991
PT 9507 Bend R= 0.152m K= 5.22 90. 3.347
PT A004 Straight on 0. 0.444
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 19
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 1529 Straight on 0. 0.444

PT 1531 Coupling with line 15 0. 0.105
PT 1533 Straight on 0. 0.105
PT A031 Bend R= 0.152m K= 5.22 90. 0.452
PT A034 Coupling with line 16 0. 0.160
PT 1537 Bend R= 0.152m K= 5.22 90. 2.401
PT 1539 Bend R= 0.152m K= 5.22 90. 1.100
PT 1541 Straight on 0. 0.352
PT 1543 Straight on 0. 0.105
PT 1545 Straight on 0. 0.070
PT 1547 Straight on 0. 0.070
EM A083 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.002
ZE N5 Additional results
Straight on 0. 0.097
PT N5 Straight on
EM ~685 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
TF $009 TFS-branch spring (STIFF) 0.301
PT 9129 Coupling with line 17 0.652

L i n e 11

PT 1447 Coupling with line 10

TF $010 TWA-branch spring (STIFF) 0.054
PT 1551 Straight on 0. 0.092
PT 1553 End point 0.076

L i n e 12

PT 1329 Coupling with line 3

TF $011 TWA-branch spring (STIFF) 0.054
PT 1571 Straight on 0. 0.092
PT 1573 End point 0.076

L i n e 13

PT 1145 Coupling with line 5

TF $012 TTU-branch spring (STIFF) 0.054
PT 1143 Straight on 0. 0.092
PT 1141 End point 0.060

L i n e 14

PT 1731 Coupling with line 2

TF $013 TWA-branch spring (STIFF) 0.054
PT 1761 Straight on 0. 0.092
PT 1759 Bend R= 0.029m K= 1.88 90. 0.278
PT 1757 Straight on 0. 0.341
PT 1755 Straight on 0. 0.064
PT 1753 Bend R= 0.029m K= 1.88 90. 0.332
PT 1751 Straight on 0. 0.278
TF $014 TWA-branch spring (STIFF) 0.092
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 20
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 1725 Coupling with line 2 0.054

L i n e 15

PT 1531 Coupling with line 10

TF $015 TFS-branch spring (STIFF) 0.054
PT 1557 Straight on 0. 0.035
EM A042 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.002
PT 1559 Straight on 0. 0.068
EM 1561 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.225

L i n e 16

PT A034 Coupling with line 10

AR S90 Ext. friction support 0.170
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 1000000.
Y -2.0 2.0 µXY=0.300 µZY=0.300 1000000.
Z 0.0 999.0 µXZ=0.100 µYZ=0.100 1000000.

L i n e 17

PT 9129 Coupling with line 10

PT 9125 Coupling with line 19 0. 0.955
PT 9131 Coupling with line 26 0. 0.001
EM 9127 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 0.579

L i n e 18

PT 9129 Coupling with line 17

PT 9997 Coupling with line 32 0. 0.405
PT 9998 Coupling with line 33 0. 2.650
PT 9137 Coupling with line 22 0. 0.585
EM 9135 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 1.482

L i n e 19

PT 9125 Coupling with line 17

TF $016 TFS-branch spring (STIFF) 0.652
EM ~684 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.288
PT N1 Straight on 0. 0.110
ZE N1 Additional results
Straight on
EM ~471 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
EM ~478 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.914
PT 1801 Straight on 0. 0.110
EM ~740 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT 1803 Straight on 0. 0.002
PT 1805 Bend R= 0.305m K= 6.47 90. 0.305
PT 1807 Bend R= 0.305m K= 8.53 90. 3.275
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 21
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S218 Ext. friction support 0. 1.881

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 1811 Bend R= 0.305m K= 8.53 90. 0.505
PT 1813 Bend R= 0.305m K= 8.53 45. 1.906
PT 1815 Bend R= 0.305m K= 8.53 45. 1.999
PT 1817 Bend R= 0.305m K= 6.47 90. 0.632
PT 1819 Straight on 0. 0.305
EM ~742 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.002
PT 1821 Straight on 0. 0.110
PT 1823 Straight on 0. 0.016
PT 1825 Straight on 0. 0.016
EM ~498 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT D027 Bend R= 0.305m K= 8.53 90. 0.637
PT D025 Straight on 0. 0.305
TF $017 TEX-branch spring (STIFF) 0.072
PT C943 Coupling with line 20 0.106

L i n e 20

PT C943 Coupling with line 19

PT C941 Angle 9. 0.178
PT C047 Straight on 0. 0.077
PT C045 Angle 9. 0.077
EM A089 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.002
PT C043 Straight on 0. 0.097
PT C041 Straight on 0. 0.408
PT C039 Straight on 0. 0.454
EM A088 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
PT C037 Angle 11. 0.002
PT C035 Straight on 0. 0.071
PT C033 Angle 11. 0.071
EM 9031 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.002
PT C031 Straight on 0. 0.084
PT C029 Straight on 0. 0.377
EM 9029 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT C027 Angle 11. 0.002
PT C025 Straight on 0. 0.071
PT 9199 Angle 11. 0.071
PT 9193 Bend R= 0.229m K= 6.48 45. 0.335
AR SE60 Ext. friction support 0. 0.095
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 113265.9
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 113265.9
PT 9191 Bend R= 0.229m K= 6.48 45. 0.095
PT C017 Bend R= 0.229m K= 6.48 90. 1.825
PT C015 Straight on 0. 0.972
EM ~517 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.211
PT C013 Straight on 0. 0.097
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 22
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

EM ~518 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
EM ~519 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.108
PT C011 Straight on 0. 0.097
EM ~520 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
AR SE59 Ext. friction support 0. 1.494
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT C007 Bend R= 0.229m K= 6.48 90. 2.258
PT C005 Straight on 0. 0.357
TF $018 TFS-branch spring (STIFF) 0.062
PT B929 Coupling with line 21 0.081

L i n e 21

PT 9197 End point

AR SE58 Ext. friction support 0. 0.500
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 113265.9
Y -2.0 2.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT B907 Bend R= 0.229m K= 6.48 45. 2.559
AR SE57 Ext. friction support 0. 0.095
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 113265.9
PT B911 Bend R= 0.229m K= 6.48 45. 0.095
PT B913 Bend R= 0.229m K= 6.48 90. 1.116
PT B915 Straight on 0. 0.790
PT B917 Bend R= 0.229m K= 6.48 90. 0.449
PT B921 Bend R= 0.229m K= 6.48 90. 0.457
AR SE56 Ext. friction support 0. 2.567
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 113265.9
Y 0.0 0.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT B925 Bend R= 0.229m K= 6.48 90. 3.533
PT ~762 Straight on 1. 0.229
PT B927 Straight on 0. 0.000
PT B929 Coupling with line 20 0. 0.143
PT B931 Straight on 0. 0.143
PT B933 Straight on 0. 0.070
PT B935 Straight on 0. 0.070
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 23
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR SE55 Ext. friction support 0. 1.975

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 31612.85
EM ~524 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 1.062
PT B939 Straight on 0. 0.078
EM ~523 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.078
EM ~522 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.046
PT B941 Straight on 0. 0.078
EM ~521 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.078
AR SE54 Ext. friction support 0. 0.796
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 31612.85
PT B945 Straight on 0. 0.716
PT B947 Straight on 0. 0.070
PT B949 Straight on 0. 0.070
PT ~764 Straight on 1. 0.000
PT B951 Bend R= 0.229m K= 6.48 90. 0.229
PT B953 Bend R= 0.229m K= 6.48 90. 1.008
PT B955 Bend R= 0.229m K= 6.48 45. 1.849
AR SE53 Ext. friction support 0. 0.095
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT B959 Bend R= 0.229m K= 6.48 45. 0.095
PT B963 Angle 16. 0.344
PT B965 Straight on 0. 0.073
PT B967 Angle 16. 0.073
EM A050 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
PT B969 Straight on 0. 0.078
PT B971 Straight on 0. 0.327
EM A051 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.078
PT B973 Angle 16. 0.002
PT B975 Straight on 0. 0.073
PT B977 Angle 16. 0.073
EM A052 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.002
AR SE52 Ext. friction support 0.097
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9

L i n e 22

PT 9137 Coupling with line 18

TF $019 TFS-branch spring (STIFF) 0.652
EM ~686 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.302
PT N6 Straight on 0. 0.097
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 24
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

ZE N6 Additional results
Straight on
EM ~739 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
PT 1651 Bend R= 0.229m K= 5.17 90. 0.231
PT 1647 Angle 11. 0.229
PT 1645 Straight on 0. 0.071
PT 1643 Angle 11. 0.071
PT 1641 Coupling with line 23 0. 0.084
PT 9500 Bend R= 0.152m K= 5.23 90. 0.534
PT 9567 Coupling with line 24 180. 0.160
AR S77 Ext. friction support 0.170
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.0 µXZ=0.100 µYZ=0.100 1000000.

L i n e 23

PT 1641 Coupling with line 22

TF $020 TWA-branch spring (STIFF) 0.054
PT 1657 Bend R= 0.038m K= 1.98 90. 0.114
PT 1659 Straight on 0. 0.122
PT 1661 End point 0.076

L i n e 24

PT 9567 Coupling with line 22

AR S76 Ext. friction support 0. 2.980
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y 0.0 999.9 µXY=0.300 µZY=0.300 52257.96
PT 1633 Bend R= 0.152m K= 5.23 90. 0.252
PT 1631 Bend R= 0.152m K= 5.23 90. 1.104
PT 1629 Bend R= 0.152m K= 5.23 90. 2.823
PT 1627 Bend R= 0.152m K= 5.23 90. 1.106
AR S75 Ext. friction support 0. 1.070
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -10.0 10.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1623 Bend R= 0.152m K= 5.23 90. 2.648
PT 1621 Bend R= 0.152m K= 5.23 90. 0.545
AR S74 Ext. friction support 0. 0.455
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 25
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S73 Ext. friction support 0. 3.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 52257.96
Y -10.0 10.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1615 Bend R= 0.152m K= 5.23 90. 2.070
PT 1613 Bend R= 0.152m K= 5.23 90. 0.541
AR S72 Ext. friction support 0. 0.352
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1609 Bend R= 0.152m K= 5.23 90. 0.466
PT 1607 Bend R= 0.152m K= 5.23 90. 2.566
AR S70 Ext. friction support 0. 1.534
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1603 Bend R= 0.152m K= 5.23 90. 0.764
PT 1601 Angle 179. 0.152
PT ~758 Angle 179. 0.001
PT 1599 Bend R= 0.152m K= 5.23 90. 0.152
AR S69 Ext. friction support 0. 3.736
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -1.0 1.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1595 Bend R= 0.152m K= 5.23 90. 2.650
PT 1593 Bend R= 0.152m K= 5.23 90. 0.454
AR S68 Ext. friction support 0. 1.850
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1589 Bend R= 0.152m K= 5.23 90. 0.429
PT 1587 Bend R= 0.152m K= 5.23 90. 1.561
PT S81 Straight on 0. 1.080
HR S67 Friction Hanger 0. 1.618
Hanger direction RIH= +WZ
Hanger length LH= 1.000 m
Spring constant CH= 1.0E+20 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT 1583 Bend R= 0.152m K= 5.23 90. 3.654
PT 1579 Bend R= 0.152m K= 5.23 90. 0.478
PT 1577 Straight on 0. 2.054
TF $021 TFS-branch spring (STIFF) 0.051
PT 1341 Coupling with line 3 0.054
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 26
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 25

PT 1167 Coupling with line 5

TF $022 TWA-branch spring (STIFF) 0.054
PT 1199 Straight on 0. 0.092
PT 1197 Bend R= 0.029m K= 1.88 90. 0.278
PT 1195 Straight on 0. 0.341
PT 1193 Straight on 0. 0.064
PT 1191 Bend R= 0.029m K= 1.88 90. 0.332
PT 1189 Straight on 0. 0.278
TF $023 TWA-branch spring (STIFF) 0.092
PT 1161 Coupling with line 5 0.054

L i n e 26

PT 9131 Coupling with line 17

TF $024 TFS-branch spring (STIFF) 0.652
EM ~683 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.289
PT N2 Straight on 0. 0.110
ZE N2 Additional results
Straight on
EM ~678 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT 193 Straight on 0. 0.006
PT 197 Bend R= 0.305m K= 6.49 90. 0.305
EM ~491 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.912
PT 207 Straight on 0. 0.110
EM ~488 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT 205 Coupling with line 27 0. 0.173
PT 225 Bend R= 0.305m K= 8.55 90. 1.204
PT 201 Bend R= 0.305m K= 8.55 90. 3.031
AR S111 Ext. friction support 0. 0.645
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 209 Bend R= 0.305m K= 8.55 90. 2.051
PT 223 Bend R= 0.305m K= 8.55 30. 0.778
PT 221 Straight on 0. 0.082
PT 211 Bend R= 0.305m K= 8.55 30. 0.342
PT 213 Bend R= 0.305m K= 8.55 45. 1.853
PT 215 Bend R= 0.305m K= 8.55 45. 1.927
PT 217 Bend R= 0.305m K= 8.55 90. 0.632
AR S112 Ext. friction support 0. 0.510
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
EM ~496 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.635
PT 237 Straight on 0. 0.110
PT 231 Straight on 0. 0.016
PT 227 Straight on 0. 0.016
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 27
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

EM ~679 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT 4765 Straight on 0. 0.003
PT 4767 Bend R= 0.305m K= 6.49 45. 0.126
PT 4771 Bend R= 0.305m K= 8.55 90. 0.829
EM ~681 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.667
PT N3 Straight on 0. 0.110
ZE N3 Additional results
Straight on
EM ~680 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
TF $025 TFS-branch spring (STIFF) 0.174
PT 9111 Coupling with line 28 0.586

L i n e 27

PT 205 Coupling with line 26

TF $026 TWA-branch spring (STIFF) 0.106
PT 117 Straight on 0. 0.042
PT 115 Bend R= 0.076m K= 4.39 90. 0.855
PT 113 Bend R= 0.076m K= 4.39 90. 1.454
PT 111 Bend R= 0.076m K= 4.39 90. 2.004
AR S110 Ext. friction support 0. 2.095
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Y -1.0 1.0 µXY=0.300 µZY=0.300 14556.42
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
AR S109 Ext. friction support 0. 3.309
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
PT 189 Bend R= 0.076m K= 4.39 90. 1.134
PT 105 Bend R= 0.076m K= 4.39 90. 1.688
PT 103 Straight on 0. 0.315
PT 101 Coupling with line 39 0. 0.064
PT 99 Straight on 0. 0.064
AR S108 Ext. friction support 0. 0.796
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 14556.42
Y -2.0 2.0 µXY=0.300 µZY=0.300 14556.42
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 14556.42
PT 191 Bend R= 0.076m K= 4.39 90. 0.424
PT 107 Bend R= 0.076m K= 4.39 90. 0.966
PT 91 Bend R= 0.076m K= 4.39 90. 1.081
AR S107 Ext. friction support 0. 0.150
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 14556.42
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 14556.42
EM ~052 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.354
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 28
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 89 Straight on 0. 0.068
PT 87 Straight on 0. 0.225
EM ~053 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 95 Coupling with line 30 0. 0.101
PT 83 Bend R= 0.076m K= 4.39 90. 0.175
PT Y1 Straight on 0. 0.165
PT 9139 Straight on 0. 0.100
PT 79 Straight on 0. 0.083
PT 77 Straight on 0. 0.083
EM A115 Point mass (kg) MWX= 1.0 MWY= 1.0 MWZ= 1.0 0. 0.010
PT 93 Straight on 0. 0.017
PT 85 Angle 90. 0.116
PT 71 Straight on 0. 0.114
EM ~018 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
ST SX1 Support Anchorpoint 0. 0.102
PT 69 Coupling with line 49 0.241

L i n e 28

PT 9111 Coupling with line 26

PT 9996 Coupling with line 44 0. 1.600
PT 9995 Coupling with line 45 0. 2.600
EM 9119 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 1.858

L i n e 29

PT 9111 Coupling with line 28

PT 9123 Coupling with line 31 1. 0.001
EM 9121 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 0.664

L i n e 30

PT 95 Coupling with line 27

TF $027 TTU-branch spring (STIFF) 0.028
PT 127 Straight on 0. 0.091
PT 129 End point 0.076

L i n e 31

PT 9123 Coupling with line 29

TF $028 TFS-branch spring (STIFF) 0.586
EM ~682 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.174
PT 9113 End point 0.110

L i n e 32

PT 9997 Coupling with line 18

ST EQ3 Support Anchorpoint 0.660
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 29
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 33

PT 9998 Coupling with line 18

AR EQ4 Ext. friction support 0.660
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 2.0 µYX=0.300 µZX=0.300 1000000.
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 1000000.

L i n e 34

PT C943 Coupling with line 20

PT C945 Straight on 0. 0.178
AR SE61 Ext. friction support 0. 0.307
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT C949 Straight on 0. 0.270
PT C951 Coupling with line 35 0. 0.178
PT 9149 Straight on 0. 0.178
EM A084 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.002
PT 9153 Straight on 0. 0.110
PT D079 Straight on 0. 0.428
EM A053 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT C955 Angle 9. 0.002
PT 9175 Straight on 0. 0.077
PT 9177 Angle 9. 0.077
EM A086 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.002
PT 9185 Straight on 0. 0.097
PT 9183 Straight on 0. 0.229
EM A087 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
PT 9187 Angle 9. 0.002
PT 9155 Straight on 0. 0.077
PT 9163 Angle 9. 0.077
PT C957 Bend R= 0.305m K= 8.53 45. 0.377
AR SE62 Ext. friction support 0. 0.126
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 191975.4
Z 0.0 999.9 µXZ=0.100 µYZ=0.100 191975.4
PT C961 Bend R= 0.305m K= 6.47 45. 0.126
PT C963 Straight on 0. 0.126
EM ~743 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.002
PT C965 Straight on 0. 0.110
PT C967 Straight on 0. 0.428
EM A057 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT C969 Straight on 0. 0.002
PT C971 Coupling with line 35 0. 0.178
PT C973 Straight on 0. 0.178
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 30
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT C975 Bend R= 0.305m K= 8.53 90. 4.497

PT C977 Bend R= 0.305m K= 8.53 90. 1.745
PT C979 Bend R= 0.305m K= 8.53 45. 0.822
AR SE63 Ext. friction support 0. 0.126
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 191975.4
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 191975.4
PT C983 Bend R= 0.305m K= 8.53 45. 0.126
AR SE64 Ext. friction support 0. 2.472
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 191975.4
Y -2.0 2.0 µXY=0.300 µZY=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 9147 End point 0.500

L i n e 35

PT C951 Coupling with line 34

TF $029 TFS-branch spring (STIFF) 0.105
PT D059 Straight on 0. 0.063
PT D061 Bend R= 0.229m K= 6.54 90. 0.967
PT D063 Straight on 0. 0.229
PT D065 Bend R= 0.229m K= 6.54 90. 0.229
EM ~535 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 1.240
PT D067 Straight on 0. 0.097
PT 9161 Straight on 0. 0.454
EM ~753 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
PT D071 Straight on 0. 0.003
PT D073 Bend R= 0.229m K= 5.20 90. 0.229
PT D075 Straight on 0. 0.290
TF $030 TFS-branch spring (STIFF) 0.063
PT C971 Coupling with line 34 0.105

L i n e 36

PT 1435 Coupling with line 3

PT 1667 Straight on 0. 0.105
PT 1669 Bend R= 0.152m K= 5.23 90. 0.695
PT 1671 Straight on 0. 0.742
PT 1673 Coupling with line 46 0. 0.105
PT 8993 Straight on 0. 0.105
EM A037 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.007
ZE N12 Additional results
Straight on 0. 0.102
PT N12 Straight on
EM ~694 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.102
PT 9261 Angle 90. 0.450
ST 2 Support Anchorpoint 0. 0.800
PT 9259 Angle 90. 0.800
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 31
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

EM ~695 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.450
PT N11 Straight on 0. 0.102
ZE N11 Additional results
Straight on
EM A038 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.102
PT 8995 Straight on 0. 0.007
PT 1685 Coupling with line 37 0.105

L i n e 37

PT 1435 Coupling with line 36

PT 1679 Straight on 0. 0.105
PT 1681 Bend R= 0.152m K= 5.23 90. 0.695
PT 1683 Straight on 0. 0.742
PT 1685 Coupling with line 36 0.105

L i n e 38

PT 1685 Coupling with line 37

TF $031 TFS-branch spring (STIFF) 0.054
PT 1691 Straight on 0. 0.035
EM ~381 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.102
PT 1693 Straight on 0. 0.068
EM 1695 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.225

L i n e 39

PT 101 Coupling with line 27

TF $032 TFS-branch spring (STIFF) 0.028
PT 133 Straight on 0. 0.036
PT 135 Straight on 0. 0.579
PT 73 Coupling with line 40 0. 0.064
PT 137 Straight on 0. 0.064
PT 139 Bend R= 0.076m K= 4.39 90. 0.312
EM ~044 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.228
PT 141 Straight on 0. 0.068
PT 143 Straight on 0. 0.225
EM ~045 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 145 Coupling with line 41 0. 0.101
PT 147 Bend R= 0.076m K= 4.39 90. 0.175
AR S98 Ext. friction support 0. 0.165
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 14556.42
Y -1.0 1.0 µXY=0.300 µZY=0.300 14556.42
PT 9141 Straight on 0. 0.100
PT 151 Straight on 0. 0.083
PT 153 Straight on 0. 0.083
EM A114 Point mass (kg) MWX= 1.0 MWY= 1.0 MWZ= 1.0 0. 0.010
PT 155 Straight on 0. 0.017
PT 157 Angle 90. 0.116
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 32
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 159 Straight on 0. 0.114

EM ~687 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
ST SX2 Support Anchorpoint 0. 0.096
PT 163 Coupling with line 47 0.041

L i n e 40

PT 73 Coupling with line 39

TF $033 TFS-branch spring (STIFF) 0.028
PT 75 Straight on 0. 0.036
EM ~048 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.152
PT 97 Straight on 0. 0.068
PT 51 Straight on 0. 0.276
EM ~031 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 49 Bend R= 0.076m K= 2.93 90. 0.178
PT 53 Bend R= 0.076m K= 2.93 90. 1.224
PT 55 Bend R= 0.076m K= 2.93 90. 0.311
AR S99 Ext. friction support 0. 0.595
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 14556.42
Y -2.0 2.0 µXY=0.300 µZY=0.300 14556.42
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 14556.42
PT 41 Straight on 0. 1.979
PT 39 Coupling with line 47 0. 0.064
PT 37 Straight on 0. 0.064
PT 35 Straight on 0. 0.462
PT 33 Coupling with line 49 0. 0.064
PT 31 Straight on 0. 0.064
AR S100 Ext. friction support 0. 0.304
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 14556.42
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 14556.42
AR S101 Ext. friction support 0. 1.825
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
PT 43 Bend R= 0.076m K= 2.93 90. 0.600
PT 45 Bend R= 0.076m K= 2.93 90. 0.511
AR S102 Ext. friction support 0. 2.268
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
PT 21 Bend R= 0.076m K= 2.93 90. 0.692
PT 19 Bend R= 0.076m K= 2.93 90. 0.713
PT 27 Bend R= 0.076m K= 2.93 90. 0.257
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 33
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S104 Ext. friction support 0. 1.316

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
AR S105 Ext. friction support 0. 4.494
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 14556.42
AR S106 Ext. friction support 0. 4.494
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Y -1.0 1.0 µXY=0.300 µZY=0.300 14556.42
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 14556.42
PT 11 Bend R= 0.076m K= 2.93 90. 0.406
PT 15 Bend R= 0.076m K= 2.93 90. 1.452
PT 17 Bend R= 0.076m K= 2.93 90. 0.370
PT 9 Bend R= 0.076m K= 2.93 90. 2.160
PT 7 Bend R= 0.076m K= 2.93 45. 0.723
EM ~688 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.503
PT 25 Straight on 0. 0.062
EM ~689 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
PT T067 Coupling with line 42 0.923

L i n e 41

PT 145 Coupling with line 39

TF $034 TTU-branch spring (STIFF) 0.028
PT 177 Straight on 0. 0.091
PT 179 End point 0.076

L i n e 42

PT 9427 End point

AR SE1 Ext. friction support 0. 0.500
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 2642576.
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
AR SE2 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 2642576.
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 34
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR SE3 Ext. friction support 0. 6.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
AR SE4 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 2642576.
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
AR SE5 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
PT F117 Bend R= 1.219m K= 22.80 90. 1.999
PT F119 Bend R= 1.219m K= 22.80 90. 5.600
AR SE6 Ext. friction support 0. 4.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
PT F125 Bend R= 1.219m K= 22.80 90. 4.000
PT F127 Bend R= 1.219m K= 22.80 90. 5.601
AR SE7 Ext. friction support 0. 2.001
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
AR SE8 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 2642576.
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 2642576.
PT F133 Angle 5. 4.389
PT F135 Straight on 0. 0.306
PT F137 Angle 5. 0.306
AR SE9 Ext. friction support 0. 1.001
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 3344510.
AR SE10 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 3344510.
Y -2.0 2.0 µXY=0.300 µZY=0.300 3344510.
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 3344510.
PT T067 Coupling with line 40 0. 1.783
PT F145 Bend R= 1.372m K= 25.67 90. 2.394
EM ~662 Point mass (kg) MWX= 367.0 MWY= 367.0 MWZ= 367.0 0. 2.999
PT F155 Straight on 0. 0.156
PT F157 Straight on 0. 0.765
EM 9999 Point mass (kg) MWX= 367.0 MWY= 367.0 MWZ= 367.0 0. 0.156
PT A024 Bend R= 1.372m K= 16.23 45. 0.571
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 35
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR SE11 Ext. friction support 0. 0.568

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -1.0 1.0 µXY=0.300 µZY=0.300 3344510.
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 200.000
PT A023 Bend R= 1.372m K= 25.67 45. 0.568
ST BC99 Support PY=0 1.069

L i n e 43

PT 69 Coupling with line 49

TF $035 TWA-branch spring (STIFF) 0.027
PT 121 Straight on 0. 0.092
PT 123 End point 0.076

L i n e 44

PT 9996 Coupling with line 28

ST EQ01 Support Anchorpoint 0.600

L i n e 45

PT 9995 Coupling with line 28

AR EQ02 Ext. friction support 0.600
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 2.0 µYX=0.300 µZX=0.300 1000000.
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 1000000.

L i n e 46

PT 1673 Coupling with line 36

TF $036 TFS-branch spring (STIFF) 0.054
PT 1697 Straight on 0. 0.035
EM ~380 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.102
PT 1699 Straight on 0. 0.068
EM 1701 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.225

L i n e 47

PT 39 Coupling with line 40

TF $037 TEX-branch spring (STIFF) 0.027
PT 175 Straight on 0. 0.037
PT 173 Bend R= 0.076m K= 2.93 90. 1.203
PT S50 Straight on 0. 0.722
PT 169 Bend R= 0.076m K= 2.93 90. 0.502
EM ~023 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.202
PT 167 Straight on 0. 0.062
PT 165 Straight on 0. 0.187
EM ~017 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
PT 163 Coupling with line 39 0.138
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 36
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 48

PT 163 Coupling with line 47

TF $038 TTU-branch spring (STIFF) 0.027
PT 183 Straight on 0. 0.092
PT 185 End point 0.076

L i n e 49

PT 33 Coupling with line 40

TF $039 TEX-branch spring (STIFF) 0.027
PT 59 Straight on 0. 0.037
PT 61 Bend R= 0.076m K= 2.93 90. 1.207
PT S56 Straight on 0. 0.722
EM ~024 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.502
PT 65 Straight on 0. 0.062
PT 67 Straight on 0. 0.187
EM ~025 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
PT 69 Coupling with line 27 0.138

L i n e 50

EM 925 Point mass (kg) MWX= 3.4 MWY= 3.4 MWZ= 3.4
EM A017 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 8953 Straight on 0. 0.002
TF $040 TFS-branch spring (STIFF) 0.044
PT 907 Coupling with line 51 0.042

L i n e 51

PT 907 Coupling with line 50

PT 909 Straight on 0. 0.086
PT 911 Coupling with line 53 0. 0.080
PT 913 Coupling with line 58 0. 0.066
PT 915 Angle 9. 0.034
PT 917 Straight on 0. 0.045
PT 919 Angle 9. 0.045
EM ~134 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.502
ZE N14 Additional results
Straight on 0.068
PT N14 Straight on
ST N14 Support Anchorpoint

L i n e 52

PT 907 Coupling with line 51

PT 905 Angle 179. 0.086
PT ~714 Angle 180. 0.000
PT 9529 Bend R= 0.114m K= 4.57 45. 0.047
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 37
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S217 Ext. friction support 0. 0.047

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 9528 Bend R= 0.114m K= 4.57 45. 0.047
EM ~135 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.221
PT 895 Straight on 0. 0.068
PT 893 Straight on 0. 0.223
EM ~110 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 889 Straight on 0. 0.916
TF $041 TEX-branch spring (STIFF) 0.044
PT 855 Coupling with line 54 0.042

L i n e 53

PT 911 Coupling with line 51

TF $042 TWA-branch spring (STIFF) 0.042
PT 927 Straight on 0. 0.092
PT 929 End point 0.060

L i n e 54

PT 855 Coupling with line 52

PT 857 Straight on 0. 0.086
PT 859 Bend R= 0.114m K= 4.57 90. 2.214
EM ~108 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 1.002
PT 861 Straight on 0. 0.068
PT 863 Straight on 0. 0.223
EM ~133 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 9535 Bend R= 0.114m K= 4.57 45. 0.221
AR S216 Ext. friction support 0. 0.047
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 9536 Bend R= 0.114m K= 4.57 45. 0.047
PT ~716 Angle 180. 0.047
PT 871 Angle 180. 0.000
PT 873 Coupling with line 57 0. 0.086
PT 875 Straight on 0. 0.086
PT 877 Coupling with line 55 0. 0.080
PT 879 Coupling with line 60 0. 0.066
PT 881 Angle 9. 0.034
PT 883 Straight on 0. 0.045
PT 885 Angle 9. 0.045
EM ~132 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.502
ZE N13 Additional results
Straight on 0.068
PT N13 Straight on
ST N13 Support Anchorpoint
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 38
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 55

PT 877 Coupling with line 54

TF $043 TWA-branch spring (STIFF) 0.042
PT 949 Straight on 0. 0.092
PT 951 End point 0.060

L i n e 56

PT 855 Coupling with line 54

PT 853 Straight on 0. 0.086
PT 851 Bend R= 0.114m K= 4.57 90. 1.600
AR S215 Ext. friction support 0. 0.556
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -1.0 1.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 31612.85
PT S161 Straight on 0. 2.500
PT 849 Bend R= 0.114m K= 4.57 90. 0.222
AR S214 Ext. friction support 0. 2.228
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
AR S213 Ext. friction support 0. 2.500
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 31612.85
PT 847 Bend R= 0.114m K= 4.57 90. 1.672
PT 845 Bend R= 0.114m K= 4.57 90. 0.900
PT 843 Bend R= 0.114m K= 4.57 90. 2.700
AR S212 Ext. friction support 0. 0.219
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -10.0 10.0 µYX=0.300 µZX=0.300 31612.85
AR S211 Ext. friction support 0. 2.588
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 841 Bend R= 0.114m K= 4.57 90. 1.492
PT 839 Bend R= 0.114m K= 4.57 90. 1.114
PT 837 Bend R= 0.114m K= 4.57 90. 0.500
PT 835 Bend R= 0.114m K= 4.57 90. 0.850
PT 833 Bend R= 0.114m K= 4.57 90. 1.809
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 39
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S210 Ext. friction support 0. 0.350

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -5.0 5.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S209 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S208 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S207 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S206 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S205 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S204 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S203 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S202 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S201 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 40
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S200 Ext. friction support 0. 3.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S199 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S198 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S197 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S196 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S195 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S194 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S193 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S192 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S191 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -1.0 1.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 41
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S190 Ext. friction support 0. 3.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S189 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S188 Ext. friction support 0. 2.997
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S187 Ext. friction support 0. 2.990
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S186 Ext. friction support 0. 2.999
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S185 Ext. friction support 0. 3.002
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 831 Bend R= 0.114m K= 4.57 90. 0.837
PT 829 Bend R= 0.114m K= 4.57 90. 4.771
PT 827 Bend R= 0.114m K= 4.57 90. 3.115
PT 825 Bend R= 0.114m K= 4.57 90. 1.840
AR S184 Ext. friction support 1. 0.490
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -5.0 5.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 31612.85
AR S183 Ext. friction support 0. 3.402
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -1.0 1.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 819 Bend R= 0.114m K= 4.57 90. 2.819
EM ~697 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 1.639
PT 817 Straight on 0. 0.068
PT 981 Straight on 0. 0.212
EM ~106 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 979 Straight on 0. 0.299
PT 977 Coupling with line 59 0. 0.086
PT 975 Straight on 0. 0.086
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 42
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

EM A014 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5
0. 0.002
PT 969 Straight on 0. 0.068
PT 967 Straight on 0. 0.223
EM ~710 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
AR S182 Ext. friction support 0. 0.114
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
AR BC05 Ext. friction support 0.688
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 275.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 275.000
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 275.000

L i n e 57

PT 873 Coupling with line 54

TF $044 TFS-branch spring (STIFF) 0.042
PT 8951 Straight on 0. 0.044
EM A016 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.002
EM 947 Point mass (kg) MWX= 3.4 MWY= 3.4 MWZ= 3.4 0.068

L i n e 58

PT 913 Coupling with line 51

TF $045 TWA-branch spring (STIFF) 0.042
PT 933 End point 0.092

L i n e 59

PT 977 Coupling with line 56

TF $046 TEX-branch spring (STIFF) 0.042
PT 987 Straight on 0. 0.034
EM A015 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.002
PT 989 Straight on 0. 0.062
EM 991 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.187

L i n e 60

PT 879 Coupling with line 54

TF $047 TWA-branch spring (STIFF) 0.042
PT 955 End point 0.092

L i n e 61

ST N16 Support Anchorpoint

PT N16 Straight on
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 43
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

ZE N16 Additional results

Straight on
EM A020 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 775 Straight on 0. 0.002
PT 773 Straight on 0. 0.045
PT 771 Straight on 0. 0.045
PT 769 Coupling with line 62 0. 0.100
EM ~142 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.102
PT 767 Straight on 0. 0.068
PT 765 Straight on 0. 0.250
EM ~143 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 763 Coupling with line 63 0. 0.081
EM ~145 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.081
PT 757 Straight on 0. 0.068
PT 755 Straight on 0. 0.223
EM ~737 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 753 Straight on 0. 0.002
PT 751 Bend R= 0.114m K= 3.85 90. 0.114
PT 749 Straight on 0. 0.969
TF $048 TFS-branch spring (STIFF) 0.044
PT 679 Coupling with line 64 0.042

L i n e 62

PT 769 Coupling with line 61

TF $049 TWA-branch spring (STIFF) 0.042
PT 785 Straight on 0. 0.092
PT 787 End point 0.060

L i n e 63

PT 763 Coupling with line 61

TF $050 TWA-branch spring (STIFF) 0.042
PT 779 Straight on 0. 0.092
PT 781 End point 0.076

L i n e 64

PT 679 Coupling with line 61

PT 677 Straight on 0. 0.086
HR S179 Friction Hanger 0. 0.200
Hanger direction RIH= +WZ
Hanger length LH= 0.600 m
Spring constant CH= 4.100 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT 675 Bend R= 0.114m K= 4.57 90. 1.600
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 44
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S178 Ext. friction support 0. 0.756

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -1.0 1.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 31612.85
PT S129 Straight on 0. 2.500
PT 673 Bend R= 0.114m K= 4.57 90. 0.221
AR S177 Ext. friction support 0. 2.228
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
AR S176 Ext. friction support 0. 2.500
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 31612.85
PT 671 Bend R= 0.114m K= 4.57 90. 1.872
PT 669 Bend R= 0.114m K= 4.57 90. 0.700
PT 667 Bend R= 0.114m K= 4.57 90. 2.500
AR S175 Ext. friction support 0. 0.220
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -10.0 10.0 µYX=0.300 µZX=0.300 31612.85
AR S174 Ext. friction support 0. 2.586
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 665 Bend R= 0.114m K= 4.57 90. 1.493
PT 663 Bend R= 0.114m K= 4.57 90. 1.114
PT 661 Bend R= 0.114m K= 4.57 90. 0.700
PT 659 Bend R= 0.114m K= 4.57 90. 1.250
PT 657 Bend R= 0.114m K= 4.57 90. 1.809
AR S173 Ext. friction support 0. 0.349
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -5.0 5.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S172 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S171 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 45
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S170 Ext. friction support 0. 3.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S169 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S166 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S163 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S162 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S160 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S159 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S158 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S157 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S156 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S155 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 46
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S154 Ext. friction support 0. 3.000

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S153 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S152 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S151 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S150 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S149 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -1.0 1.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S148 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S147 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S146 Ext. friction support 0. 2.997
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR S145 Ext. friction support 0. 2.990
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 655 Bend R= 0.114m K= 4.57 90. 0.367
PT 653 Bend R= 0.114m K= 4.57 90. 2.688
PT S103 Straight on 0. 1.657
PT 651 Bend R= 0.114m K= 4.57 90. 0.845
PT 649 Coupling with line 65 0. 1.650
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 47
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 647 Straight on 0. 0.050

PT 645 Straight on 0. 0.051
PT 643 Straight on 0. 0.051
PT 639 Straight on 0. 0.600
PT 637 Straight on 0. 0.051
PT 9552 Angle 180. 0.051
PT ~718 Angle 179. 0.000
PT 9557 Bend R= 0.114m K= 4.57 45. 0.047
AR S168 Ext. friction support 0. 0.047
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 9556 Bend R= 0.114m K= 4.57 45. 0.047
EM ~167 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.578
PT 9353 Straight on 0. 0.068
PT 9355 Straight on 0. 0.944
EM ~168 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
AR S167 Ext. friction support 0. 0.166
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 627 Bend R= 0.114m K= 4.57 90. 0.234
PT 625 Bend R= 0.114m K= 4.57 90. 0.464
PT 623 Bend R= 0.114m K= 4.57 90. 0.900
PT 621 Bend R= 0.114m K= 4.57 90. 0.464
AR S165 Ext. friction support 0. 0.189
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT S165 Coupling with line 68
EM ~177 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.077
PT 617 Straight on 0. 0.068
PT 615 Straight on 0. 0.212
EM ~178 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 613 Coupling with line 73 0. 0.102
PT 611 Angle 9. 0.100
PT 609 Straight on 0. 0.045
PT 607 Angle 9. 0.045
EM A022 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.002
PT 605 Straight on 0. 0.062
PT 603 Straight on 0. 0.263
EM A025 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
PT 601 Angle 9. 0.002
PT 599 Straight on 0. 0.045
PT 597 Angle 9. 0.045
PT 595 Coupling with line 74 0.100
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 48
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 65

PT 649 Coupling with line 64

TF $051 TWA-branch spring (STIFF) 0.042
PT 743 Straight on 0. 0.092
PT 745 End point 0.060

L i n e 66

PT 679 Coupling with line 64

PT 681 Straight on 0. 0.086
HR S180 Friction Hanger 0. 1.964
Hanger direction RIH= +WZ
Hanger length LH= 0.600 m
Spring constant CH= 4.100 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT 683 Bend R= 0.114m K= 4.57 90. 0.250
PT 685 Bend R= 0.114m K= 3.85 90. 1.055
PT 687 Straight on 0. 0.114
EM ~736 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.002
PT 689 Straight on 0. 0.068
PT 691 Straight on 0. 0.223
EM ~141 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 697 Coupling with line 67 0. 0.081
EM ~137 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.081
PT 699 Straight on 0. 0.068
PT 701 Straight on 0. 0.250
EM ~136 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 703 Coupling with line 79 0. 0.102
PT 705 Straight on 0. 0.100
PT 707 Straight on 0. 0.045
PT 709 Straight on 0. 0.045
EM A018 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.002
ZE N15 Additional results
Straight on 0.068
PT N15 Straight on
ST N15 Support Anchorpoint

L i n e 67

PT 697 Coupling with line 66

TF $052 TWA-branch spring (STIFF) 0.042
PT 791 Straight on 0. 0.092
PT 793 End point 0.076

L i n e 68

PT S165 Coupling with line 64

TF $053 TWA-branch spring (STIFF) 0.042
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 49
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 723 Straight on 0. 0.092

PT 721 Bend R= 0.038m K= 1.98 90. 0.300
EM ~187 Point mass (kg) MWX= 1.0 MWY= 1.0 MWZ= 1.0 0. 0.923
PT 719 Straight on 0. 0.017
PT 717 Straight on 0. 0.109
EM ~188 Point mass (kg) MWX= 1.0 MWY= 1.0 MWZ= 1.0 0. 0.017
PT 715 Bend R= 0.038m K= 1.98 90. 0.757
PT 713 Straight on 0. 0.300
TF $054 TWA-branch spring (STIFF) 0.092
PT S164 Coupling with line 69 0.042

L i n e 69

PT S164 Coupling with line 68

PT 587 Bend R= 0.114m K= 4.57 90. 0.189
EM ~194 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.474
PT 585 Straight on 0. 0.068
PT 583 Straight on 0. 0.250
EM ~738 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 581 Straight on 0. 0.002
PT 579 Bend R= 0.114m K= 3.85 90. 0.114
PT 577 Straight on 0. 0.530
TF $055 TFS-branch spring (STIFF) 0.043
PT 451 Coupling with line 70 0.081

L i n e 70

PT 451 Coupling with line 69

PT 453 Straight on 0. 0.143
AR S138 Ext. friction support 0. 2.437
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 457 Bend R= 0.229m K= 6.58 90. 0.664
PT 459 Straight on 0. 0.229
PT 461 Bend R= 0.229m K= 6.58 90. 0.229
PT 463 Bend R= 0.229m K= 6.58 90. 2.809
PT 465 Bend R= 0.229m K= 6.58 90. 1.745
AR S139 Ext. friction support 0. 0.616
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 469 Bend R= 0.229m K= 6.58 90. 0.632
PT 471 Bend R= 0.229m K= 6.58 90. 0.792
PT 473 Bend R= 0.229m K= 6.58 90. 0.872
AR S140 Ext. friction support 0. 2.368
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 477 Bend R= 0.229m K= 6.58 90. 2.689
PT 479 Bend R= 0.229m K= 6.58 90. 1.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 50
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S141 Ext. friction support 0. 2.244

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 113265.9
Y -2.0 2.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 483 Bend R= 0.229m K= 6.58 90. 1.129
PT 485 Bend R= 0.229m K= 6.58 90. 2.099
HR S142 Friction Hanger 0. 1.712
Hanger direction RIH= +WZ
Hanger length LH= 0.365 m
Spring constant CH= 1.0E+20 kN/m
Friction coeff. MRH= 0.000
Initial Hanger Load VH= 0.000 kN
PT 487 Bend R= 0.229m K= 6.58 90. 0.330
PT 489 Bend R= 0.229m K= 6.58 90. 1.822
PT 491 Bend R= 0.229m K= 6.58 90. 3.297
EM ~263 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 1.218
PT 493 Straight on 0. 0.087
PT 499 Straight on 0. 0.276
EM A048 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 0.087
PT 501 Straight on 0. 0.002
TF $056 TFS-branch spring (STIFF) 0.062
PT 503 Coupling with line 71 0.081

L i n e 71

PT 503 Coupling with line 70

PT 803 Straight on 0. 0.143
EM A067 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.002
PT 7881 Straight on 0. 0.097
PT 7879 Straight on 0. 0.412
EM A068 Point mass (kg) MWX= 19.0 MWY= 19.0 MWZ= 19.0 0. 0.097
PT 7877 Angle 9. 0.002
PT 7875 Straight on 0. 0.077
PT 7873 Angle 9. 0.077
PT SE93 Straight on 0. 0.296
PT SE91 Bend R= 0.305m K= 8.62 45. 0.126
AR S181 Ext. friction support 0. 0.126
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 191975.4
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 191975.4
PT SE90 Bend R= 0.305m K= 8.62 45. 0.126
PT 7867 Bend R= 0.305m K= 8.62 90. 2.185
EM ~700 Point mass (kg) MWX= 17.7 MWY= 17.7 MWZ= 17.7 0. 0.457
PT 7865 Straight on 0. 0.100
EM ~701 Point mass (kg) MWX= 17.7 MWY= 17.7 MWZ= 17.7 0. 0.100
PT 7863 Bend R= 0.305m K= 8.62 90. 1.619
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 51
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR SE65 Ext. friction support 0. 0.950

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 7819 Coupling with line 72 0. 4.550
PT 7885 Bend R= 0.305m K= 8.62 90. 1.950
AR SE66 Ext. friction support 0. 0.500
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 7889 Bend R= 0.305m K= 8.62 90. 1.456
PT 7891 Bend R= 0.305m K= 6.54 90. 1.400
PT 7893 Straight on 0. 0.305
EM ~745 Point mass (kg) MWX= 17.7 MWY= 17.7 MWZ= 17.7 0. 0.002
ZE N4 Additional results
Straight on 0. 0.100
PT N4 Straight on
EM ~699 Point mass (kg) MWX= 17.7 MWY= 17.7 MWZ= 17.7 0. 0.100
PT 9435 Angle 90. 0.680
EM 9439 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 90. 0.710
PT 9441 Coupling with line 90 0. 1.600
PT 9443 Coupling with line 91 0. 3.700
EM 9445 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 1.600

L i n e 72

PT 7819 Coupling with line 71

TF $057 TWA-branch spring (STIFF) 0.106
PT 7817 Straight on 0. 0.049
PT 7815 Bend R= 0.114m K= 4.56 90. 0.285
PT 7813 Bend R= 0.114m K= 4.56 90. 2.500
PT 7811 Bend R= 0.114m K= 4.56 90. 0.500
PT 7809 Straight on 0. 0.865
PT 7807 Coupling with line 78 0. 0.086
PT 7805 Straight on 0. 0.086
EM ~606 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.350
PT 7803 Straight on 0. 0.078
PT 7801 Straight on 0. 0.292
EM ~746 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.078
PT 7799 Straight on 0. 0.002
PT 7797 Bend R= 0.114m K= 3.85 45. 0.047
AR SE67 Ext. friction support 0. 0.047
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 7793 Bend R= 0.114m K= 4.56 45. 0.047
PT ~769 Angle 180. 0.047
PT 7791 Angle 171. 0.000
PT 7789 Straight on 0. 0.045
PT 7787 Angle 9. 0.045
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 52
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

EM A071 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.002
PT 7785 Straight on 0. 0.068
PT 7783 Straight on 0. 0.276
EM A072 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 7781 Angle 9. 0.002
PT 7779 Straight on 0. 0.045
PT 7777 Angle 9. 0.045
PT 7821 Bend R= 0.114m K= 4.56 45. 0.352
AR SE68 Ext. friction support 0. 0.047
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 7825 Bend R= 0.114m K= 3.85 45. 0.047
PT 7827 Straight on 0. 0.047
EM ~747 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
PT 7829 Straight on 0. 0.078
PT 7831 Straight on 0. 0.287
EM ~608 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.078
PT 7833 Straight on 0. 0.355
PT 7835 Coupling with line 78 0. 0.086
PT 7837 Straight on 0. 0.086
AR SE69 Ext. friction support 0. 4.364
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
PT 7841 Bend R= 0.114m K= 4.56 90. 0.345
AR SE70 Ext. friction support 0. 1.873
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 7845 Bend R= 0.114m K= 4.56 90. 0.400
PT 7847 Bend R= 0.114m K= 4.56 90. 0.652
PT 7849 Bend R= 0.114m K= 4.56 90. 2.551
AR BC15 Ext. friction support 0.264
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -1.0 1.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 31612.85

L i n e 73

PT 613 Coupling with line 64

TF $058 TWA-branch spring (STIFF) 0.042
PT 733 Straight on 0. 0.092
PT 735 Straight on 0. 0.100
PT 737 End point 0.076
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 53
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 74

AR S164 Ext. friction support

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT S164 Coupling with line 69
EM ~180 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.077
PT 591 Straight on 0. 0.068
PT 593 Straight on 0. 0.212
EM ~179 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 595 Coupling with line 64 0.102

L i n e 75

PT 451 Coupling with line 70

PT 449 Straight on 0. 0.143
AR S137 Ext. friction support 0. 0.277
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 113265.9
Y -2.0 2.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 445 Bend R= 0.229m K= 6.58 90. 4.020
PT 443 Bend R= 0.229m K= 6.58 90. 0.610
AR S136 Ext. friction support 0. 0.708
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 441 Bend R= 0.229m K= 6.58 90. 2.070
PT 439 Bend R= 0.229m K= 6.58 90. 1.080
AR S135 Ext. friction support 0. 1.392
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 113265.9
Y -1.0 1.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 437 Straight on 0. 0.080
PT 435 Coupling with line 81 0. 0.143
PT 433 Straight on 0. 0.143
PT 385 Coupling with line 82 0. 0.143
PT 405 Straight on 0. 0.143
PT 9518 Straight on 0. 0.350
PT 407 Angle 11. 0.317
PT 409 Straight on 0. 0.071
PT 411 Angle 11. 0.071
EM A029 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
PT 9295 Straight on 0. 0.075
PT 9293 Straight on 0. 1.156
EM ~237 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.075
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 54
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S133 Ext. friction support 0. 0.631

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 421 Bend R= 0.152m K= 5.27 90. 0.991
PT 423 Bend R= 0.152m K= 5.27 90. 0.700
PT 425 Bend R= 0.152m K= 5.27 90. 1.825
EM ~696 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 1.533
PT 9291 Straight on 0. 0.075
PT 1127 Straight on 0. 0.233
PT 1125 Straight on 0. 0.301
EM A028 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.075
PT 1123 Straight on 0. 0.002
PT 1121 Coupling with line 83 0. 0.105
PT 1119 Straight on 0. 0.105
EM A027 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.002
PT 1113 Straight on 0. 0.075
PT 1111 Straight on 0. 0.252
EM ~236 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.075
AR S134 Ext. friction support 0. 0.114
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
AR BC06 Ext. friction support 0.688
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 310.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 310.000
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 310.000

L i n e 76

PT 503 Coupling with line 71

PT 805 Straight on 0. 0.143
PT 3957 Coupling with line 84 0. 0.143
PT 3955 Straight on 0. 0.136
PT SE41 Coupling with line 77 0. 0.143
AR SE41 Ext. friction support
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 3951 Straight on 0. 0.143
EM A065 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 0.002
PT 3949 Straight on 0. 0.087
PT 3947 Straight on 0. 0.276
EM A064 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 0.087
PT 3945 Angle 11. 0.002
PT 3943 Straight on 0. 0.071
PT 3941 Angle 11. 0.071
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 55
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

EM A063 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.002
PT 3939 Straight on 0. 0.084
PT 3937 Straight on 0. 0.377
EM A062 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 3935 Angle 11. 0.002
PT 3933 Straight on 0. 0.071
PT 3931 Angle 11. 0.071
PT 3927 Bend R= 0.229m K= 6.58 45. 0.344
AR SE40 Ext. friction support 0. 0.095
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 113265.9
PT 3923 Bend R= 0.229m K= 5.22 45. 0.095
PT 3921 Straight on 0. 0.095
EM ~744 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 0.002
PT 3919 Straight on 0. 0.087
PT 3917 Straight on 0. 0.276
EM ~572 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 0.087
PT 3915 Straight on 0. 0.276
PT 3913 Coupling with line 77 0. 0.143
PT 3911 Straight on 0. 0.143
PT 3909 Bend R= 0.229m K= 6.58 90. 2.741
AR SE39 Ext. friction support 0. 0.950
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 113265.9
Y -2.0 2.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
AR SE38 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 3903 Bend R= 0.229m K= 6.58 90. 0.650
PT 3901 Bend R= 0.229m K= 6.58 90. 2.750
AR SE37 Ext. friction support 0. 1.200
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
EM ~576 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 0.720
PT 3897 Straight on 0. 0.087
EM ~577 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 0.087
AR SE36 Ext. friction support 0. 2.106
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
AR SE35 Ext. friction support 0. 3.017
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 56
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR SE34 Ext. friction support 0. 2.983

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -1.0 1.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
AR SE33 Ext. friction support 0. 1.600
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 3887 Bend R= 0.229m K= 6.58 90. 2.480
PT 3885 Bend R= 0.229m K= 6.58 90. 1.250
AR SE32 Ext. friction support 0. 2.350
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
AR SE31 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
AR SE30 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 113265.9
Y -2.0 2.0 µXY=0.300 µZY=0.300 113265.9
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 113265.9
PT 3881 Bend R= 0.229m K= 6.58 90. 1.300
PT 3445 Coupling with line 85 0. 0.812
EM ~560 Point mass (kg) MWX= 10.9 MWY= 10.9 MWZ= 10.9 0. 1.216
AR BC02 Ext. friction support 0.087
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 660.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 660.000
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 660.000

L i n e 77

PT SE41 Coupling with line 76

TF $059 TFS-branch spring (STIFF) 0.081
PT 4009 Straight on 0. 0.050
PT 4007 Bend R= 0.152m K= 5.27 90. 0.969
EM ~573 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 1.321
PT 4005 Straight on 0. 0.075
PT 4003 Straight on 0. 0.301
EM A066 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.075
PT 4001 Straight on 0. 0.002
TF $060 TFS-branch spring (STIFF) 0.050
PT 3913 Coupling with line 76 0.081
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 57
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 78

PT 7807 Coupling with line 72

TF $061 TFS-branch spring (STIFF) 0.042
PT 7859 Straight on 0. 0.034
EM ~611 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.561
PT 7857 Straight on 0. 0.068
PT 7855 Straight on 0. 0.276
EM 9079 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 7853 Straight on 0. 0.002
TF $062 TFS-branch spring (STIFF) 0.034
PT 7835 Coupling with line 72 0.042

L i n e 79

PT 703 Coupling with line 66

TF $063 TWA-branch spring (STIFF) 0.042
PT 797 Straight on 0. 0.092
PT 799 End point 0.060

L i n e 80

PT 595 Coupling with line 74

TF $064 TWA-branch spring (STIFF) 0.042
PT 725 Straight on 0. 0.092
PT 727 Straight on 0. 0.100
PT 729 End point 0.076

L i n e 81

PT 435 Coupling with line 75

TF $065 TFS-branch spring (STIFF) 0.081
PT 505 Straight on 0. 0.043
PT 507 Bend R= 0.114m K= 4.57 90. 0.514
EM ~089 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 1.238
PT 9283 Straight on 0. 0.068
PT 9279 Straight on 0. 1.144
EM ~088 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
AR S143 Ext. friction support 0. 0.635
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 515 Angle 7. 0.200
PT 517 Straight on 0. 0.051
PT 519 Angle 7. 0.051
PT 523 Angle 7. 0.600
PT 525 Straight on 0. 0.051
PT 527 Angle 7. 0.051
PT 529 Bend R= 0.114m K= 4.57 90. 0.608
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 58
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 531 Bend R= 0.114m K= 4.57 90. 0.700

PT 533 Bend R= 0.114m K= 4.57 90. 1.225
EM ~091 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 1.719
PT 539 Straight on 0. 0.068
PT 541 Straight on 0. 0.208
PT 543 Straight on 0. 0.250
EM A013 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 545 Straight on 0. 0.002
PT 547 Coupling with line 92 0. 0.086
PT 549 Straight on 0. 0.086
EM A012 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.002
PT 555 Straight on 0. 0.068
PT 557 Straight on 0. 0.223
EM ~085 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
AR S144 Ext. friction support 0. 0.126
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
AR BC08 Ext. friction support 0.688
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 275.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 275.000
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 275.000

L i n e 82

PT 385 Coupling with line 75

TF $066 TFS-branch spring (STIFF) 0.081
PT 383 Straight on 0. 0.043
PT 381 Bend R= 0.114m K= 3.86 90. 0.214
PT 379 Straight on 0. 0.114
EM ~735 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.002
PT 377 Straight on 0. 0.068
PT 375 Straight on 0. 0.212
EM ~075 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
EM ~078 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.880
PT 9289 Straight on 0. 0.068
PT 9285 Straight on 0. 1.144
EM ~077 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
AR S132 Ext. friction support 0. 0.243
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
PT 365 Angle 7. 0.200
PT 363 Straight on 0. 0.051
PT 361 Angle 7. 0.051
PT 357 Angle 7. 0.600
PT 355 Straight on 0. 0.051
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 59
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 353 Angle 7. 0.051

PT 351 Bend R= 0.114m K= 4.57 90. 0.308
PT 349 Bend R= 0.114m K= 4.57 90. 0.700
PT 347 Bend R= 0.114m K= 4.57 90. 1.523
EM ~074 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 1.452
PT 341 Straight on 0. 0.068
PT 339 Straight on 0. 0.208
PT 337 Straight on 0. 0.250
EM A010 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
PT 335 Straight on 0. 0.002
PT 333 Coupling with line 93 0. 0.086
PT 331 Straight on 0. 0.086
EM ~707 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.002
PT 9483 Straight on 0. 0.068
PT 323 Straight on 0. 0.223
EM ~073 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
AR S131 Ext. friction support 0. 0.393
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
AR BC07 Ext. friction support 0.688
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 275.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 275.000
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 275.000

L i n e 83

PT 1121 Coupling with line 75

TF $067 TEX-branch spring (STIFF) 0.054
PT 1133 Straight on 0. 0.035
EM A030 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.002
PT 1135 Straight on 0. 0.062
EM 1137 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.187

L i n e 84

PT 3957 Coupling with line 76

TF $068 TTU-branch spring (STIFF) 0.081
PT 4017 Straight on 0. 0.243
PT 4021 Bend R= 0.114m K= 4.57 90. 1.175
PT 4023 Bend R= 0.114m K= 4.57 90. 1.883
PT 4025 Bend R= 0.114m K= 4.57 90. 2.545
AR SE42 Ext. friction support 0. 0.950
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 31612.85
Y -2.0 2.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 31612.85
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 60
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 4029 Bend R= 0.114m K= 4.57 90. 3.310

PT 4031 Bend R= 0.114m K= 4.57 90. 2.751
AR SE43 Ext. friction support 0. 0.900
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 31612.85
EM ~589 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 2.590
PT 4035 Straight on 0. 0.068
EM ~588 Point mass (kg) MWX= 4.5 MWY= 4.5 MWZ= 4.5 0. 0.068
AR SE44 Ext. friction support 0. 0.274
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR SE45 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85
AR SE47 Ext. friction support 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 31612.85
Y -1.0 1.0 µXY=0.300 µZY=0.300 31612.85
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 31612.85

L i n e 85

PT 3445 Coupling with line 76

TF $069 TWA-branch spring (STIFF) 0.081
PT 3443 Straight on 0. 0.042
PT 3441 Bend R= 0.076m K= 4.40 90. 0.276
AR SE12 Ext. friction support 0. 1.130
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
PT 3437 Bend R= 0.076m K= 4.40 90. 0.111
PT 3435 Bend R= 0.076m K= 4.40 90. 1.586
PT 3431 Bend R= 0.076m K= 3.74 90. 0.898
PT 3429 Straight on 0. 0.076
EM ~750 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.002
PT 3427 Straight on 0. 0.062
PT 3425 Straight on 0. 0.187
EM A079 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
PT 3423 Straight on 0. 0.002
PT 3421 Coupling with line 86 0. 0.064
PT 3447 Straight on 0. 0.064
EM A080 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.002
PT 3449 Straight on 0. 0.062
PT 3451 Straight on 0. 0.197
EM ~671 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
EM ~672 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.267
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 61
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 3459 Straight on 0. 0.062

PT 3461 Straight on 0. 0.187
EM ~751 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
PT 3463 Straight on 0. 0.002
PT 3465 Bend R= 0.076m K= 3.74 90. 0.076
AR SE46 Ext. friction support 0. 0.111
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 14556.42
PT 3469 Straight on 0. 0.662
TF $070 TWA-branch spring (STIFF) 0.042
PT 3471 Coupling with line 87 0.106

L i n e 86

PT 3421 Coupling with line 85

TF $071 TFS-branch spring (STIFF) 0.028
PT 263 Straight on 0. 0.036
PT 261 Straight on 0. 0.152
TF $072 TFS-branch spring (STIFF) 0.036
PT 249 Coupling with line 88 0.028

L i n e 87

AR BC03 Ext. friction support

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 901.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 901.000
AR SE13 Ext. friction support 0. 0.300
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 3479 Bend R= 0.305m K= 8.60 90. 0.450
PT 3471 Coupling with line 85 0. 0.900
PT 3511 Bend R= 0.305m K= 8.60 90. 0.850
AR SE14 Ext. friction support 0. 1.800
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 191975.4
Y -2.0 2.0 µXY=0.300 µZY=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
AR SE15 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 3517 Bend R= 0.305m K= 8.60 90. 1.930
PT 3519 Bend R= 0.305m K= 8.60 90. 1.250
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 62
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR SE16 Ext. friction support 0. 2.160

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
AR SE17 Ext. friction support 0. 4.600
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -1.0 1.0 µXY=0.300 µZY=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
AR SE18 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
EM ~651 Point mass (kg) MWX= 17.7 MWY= 17.7 MWZ= 17.7 0. 0.196
PT 3527 Straight on 0. 0.100
EM ~650 Point mass (kg) MWX= 17.7 MWY= 17.7 MWZ= 17.7 0. 0.100
PT 3529 Bend R= 0.305m K= 8.60 45. 2.046
AR SE19 Ext. friction support 0. 0.126
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 191975.4
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 191975.4
PT 3533 Bend R= 0.305m K= 8.60 45. 0.126
PT 3535 Bend R= 0.305m K= 8.60 90. 2.971
PT 3537 Bend R= 0.305m K= 8.60 90. 1.320
PT 3539 Straight on 0. 1.107
TF $073 TFS-branch spring (STIFF) 0.070
PT 3541 Coupling with line 89 0.133

L i n e 88

PT 249 Coupling with line 86

PT 251 Straight on 0. 0.064
EM A090 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.002
PT 9011 Straight on 0. 0.068
PT 3389 Straight on 0. 0.187
EM ~673 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
EM ~677 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.266
PT 3395 Straight on 0. 0.062
PT 3397 Straight on 0. 0.187
EM ~752 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.062
PT 3399 Straight on 0. 0.002
PT 3401 Bend R= 0.076m K= 3.74 90. 0.076
AR SE25 Ext. friction support 0. 0.280
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 14556.42
PT 3405 Bend R= 0.076m K= 4.40 90. 0.220
PT 3407 Straight on 0. 0.596
TF $074 TWA-branch spring (STIFF) 0.042
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 63
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 3409 Coupling with line 89 0.133

L i n e 89

AR BC01 Ext. friction support

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 1271.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 1271.000
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 1271.000
EM ~635 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 0.100
PT 3409 Coupling with line 88 0. 1.204
PT 3627 Bend R= 0.381m K= 9.68 90. 0.877
AR SE27 Ext. friction support 0. 1.300
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 298225.2
Y -2.0 2.0 µXY=0.300 µZY=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
AR SE26 Ext. friction support 0. 6.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
PT 3621 Bend R= 0.381m K= 9.68 90. 1.440
PT 3619 Bend R= 0.381m K= 9.68 90. 1.250
AR SE24 Ext. friction support 0. 1.730
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
AR SE23 Ext. friction support 0. 4.600
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -1.0 1.0 µXY=0.300 µZY=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
EM ~634 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 4.972
PT 3611 Straight on 0. 0.100
EM ~633 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 0.100
AR SE22 Ext. friction support 0. 0.828
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
PT 3607 Bend R= 0.381m K= 9.68 90. 0.700
PT 3605 Straight on 0. 0.381
PT 3603 Bend R= 0.381m K= 9.68 45. 0.159
PT 3601 Bend R= 0.381m K= 9.68 45. 0.693
EM ~621 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 4.885
PT 3597 Straight on 0. 0.100
PT 3595 Straight on 0. 0.339
EM ~749 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 0.100
PT 3593 Straight on 0. 0.002
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 64
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 3591 Bend R= 0.381m K= 7.20 45. 0.158

AR SE21 Ext. friction support 0. 0.158
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 298225.2
Y -2.0 2.0 µXY=0.300 µZY=0.300 298225.2
Z 0.0 999.0 µXZ=0.300 µYZ=0.300 298225.2
PT 3587 Bend R= 0.381m K= 9.68 45. 0.158
PT 3583 Angle 24. 0.891
PT 3581 Straight on 0. 0.097
PT 3579 Angle 24. 0.097
EM A076 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.002
PT 3577 Straight on 0. 0.084
PT 3575 Straight on 0. 0.377
EM A077 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 3573 Angle 24. 0.002
PT 3571 Straight on 0. 0.097
PT 3569 Angle 24. 0.097
PT 3567 Bend R= 0.381m K= 9.68 45. 0.158
AR SE20 Ext. friction support 0. 0.158
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
PT 3563 Bend R= 0.381m K= 7.20 45. 0.158
PT 3561 Straight on 0. 0.158
EM ~748 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 0.002
PT 3559 Straight on 0. 0.100
PT 3557 Straight on 0. 0.339
EM ~625 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 0.100
PT 3553 Bend R= 0.381m K= 9.68 90. 1.428
PT 3551 Straight on 0. 0.764
PT 3541 Coupling with line 87 0. 0.216
PT 3655 Straight on 0. 0.216
PT 3657 Bend R= 0.381m K= 9.42 90. 2.904
PT 3659 Bend R= 0.381m K= 9.42 45. 2.127
AR SE28 Ext. friction support 0. 0.158
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 298225.2
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 298225.2
PT 3663 Bend R= 0.381m K= 9.42 45. 0.158
PT 3667 Angle 9. 0.439
PT 3669 Straight on 0. 0.090
PT 3671 Angle 9. 0.090
EM A060 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.002
PT 3673 Straight on 0. 0.110
PT 3675 Straight on 0. 0.577
EM A058 Point mass (kg) MWX= 30.4 MWY= 30.4 MWZ= 30.4 0. 0.110
PT 3677 Angle 9. 0.002
PT 3679 Straight on 0. 0.090
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 65
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

PT 3681 Angle 9. 0.090

PT 3683 Bend R= 0.381m K= 9.42 45. 0.158
AR SE29 Ext. friction support 0. 0.158
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 298225.2
Y -2.0 2.0 µXY=0.300 µZY=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
PT 3687 Bend R= 0.381m K= 9.42 45. 0.158
PT 3689 Bend R= 0.381m K= 9.42 90. 3.864
PT 1105 Straight on 0. 0.565
PT 1091 Coupling with line 96 0. 0.216
PT 1107 Straight on 0. 0.216
AR SE48 Ext. friction support 0. 1.053
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
PT 3699 Bend R= 0.381m K= 9.42 90. 1.050
PT 3701 Bend R= 0.381m K= 9.42 90. 2.750
AR SE49 Ext. friction support 0. 1.500
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
PT 3705 Bend R= 0.381m K= 9.42 90. 1.200
AR SE50 Ext. friction support 0. 4.950
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 298225.2
Y -2.0 2.0 µXY=0.300 µZY=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
PT 3711 Bend R= 0.381m K= 9.42 90. 2.518
PT 3713 Bend R= 0.381m K= 9.42 90. 4.397
PT 3715 Straight on 0. 0.381
PT 3717 Bend R= 0.381m K= 9.42 45. 0.159
AR SE51 Ext. friction support 0. 0.539
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 298225.2
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 298225.2
EM ~556 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 0.648
ZE N17 Additional results
Straight on 0. 0.100
PT N17 Straight on
EM ~698 Point mass (kg) MWX= 23.6 MWY= 23.6 MWZ= 23.6 0. 0.100
PT 9419 Angle 90. 0.810
EM 9411 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 90. 0.910
PT 9413 Coupling with line 97 0. 1.740
PT 9415 Coupling with line 98 0. 5.220
EM 9417 Point mass (kg) MWX= 0.0010 MWY= 0.0010 MWZ= 0.0010 1.740
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 66
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 90

PT 9441 Coupling with line 71

AR EQ08 Ext. friction support 1.175
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 1000000.
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 1000000.

L i n e 91

PT 9443 Coupling with line 71

ST EQ07 Support Anchorpoint 1.175

L i n e 92

PT 547 Coupling with line 81

TF $075 TFS-branch spring (STIFF) 0.042
PT 571 Straight on 0. 0.034
EM 8945 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.002
PT 573 Straight on 0. 0.062
EM 575 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.187

L i n e 93

PT 333 Coupling with line 82

TF $076 TFS-branch spring (STIFF) 0.042
EM 387 Point mass (kg) MWX= 2.7 MWY= 2.7 MWZ= 2.7 0. 0.036
PT 8939 Straight on 0. 0.062
EM 391 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.187

L i n e 94

PT 249 Coupling with line 88

PT 247 Straight on 0. 0.064
EM A091 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.002
PT 9487 Straight on 0. 0.068
PT 239 Straight on 0. 0.225
EM ~709 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 235 Coupling with line 95 0. 0.163
PT A059 Bend R= 0.076m K= 4.40 90. 1.058
PT 267 Bend R= 0.076m K= 4.40 90. 0.280
PT 269 Bend R= 0.076m K= 4.40 90. 2.789
AR S114 Ext. friction support 0. 1.293
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 67
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S115 Ext. friction support 0. 3.458

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
AR S116 Ext. friction support 0. 3.404
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 14556.42
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 14556.42
EM ~065 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.182
PT 271 Straight on 0. 0.068
PT 273 Straight on 0. 0.225
EM ~066 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.068
PT 275 Bend R= 0.076m K= 4.40 90. 1.615
PT 9429 Angle 2. 0.180
TF $077 TFS-branch spring (STIFF) 0.035
PT 281 Coupling with line 96 0.054

L i n e 95

PT 235 Coupling with line 94

TF $078 TWA-branch spring (STIFF) 0.028
PT 255 Straight on 0. 0.091
PT 257 End point 0.076

L i n e 96

PT 1091 Coupling with line 89

TF $079 TFS-branch spring (STIFF) 0.133
PT 1089 Straight on 0. 0.051
EM ~497 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.143
PT 1087 Straight on 0. 0.075
PT 1085 Straight on 0. 0.252
EM ~741 Point mass (kg) MWX= 6.8 MWY= 6.8 MWZ= 6.8 0. 0.075
PT 1079 Straight on 0. 0.002
PT 1077 Bend R= 0.152m K= 4.34 90. 0.152
PT 1075 Bend R= 0.152m K= 5.26 90. 1.038
PT 1073 Bend R= 0.152m K= 5.26 45. 4.881
PT ~756 Angle 180. 0.063
AR S128 Ext. friction support 180. 0.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1069 Bend R= 0.152m K= 5.26 45. 0.063
EM ~281 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.369
PT 1067 Straight on 0. 0.084
PT 1065 Straight on 0. 0.373
EM ~223 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 1063 Bend R= 0.152m K= 5.26 45. 0.365
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 68
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S127 Ext. friction support 180. 0.063

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT ~754 Angle 180. 0.000
PT 1059 Bend R= 0.152m K= 5.26 45. 0.063
PT 1057 Bend R= 0.152m K= 5.26 90. 4.118
AR S126 Ext. friction support 0. 1.886
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -1.0 1.0 µYX=0.300 µZX=0.300 52257.96
Y -10.0 10.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1053 Bend R= 0.152m K= 5.26 90. 0.362
PT 1051 Bend R= 0.152m K= 5.26 90. 1.260
PT 1049 Bend R= 0.152m K= 5.26 90. 1.038
PT 1047 Bend R= 0.152m K= 5.26 90. 0.935
PT 1045 Bend R= 0.152m K= 5.26 90. 1.290
AR S125 Ext. friction support 0. 0.502
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -20.0 20.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S124 Ext. friction support 0. 6.003
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -25.0 25.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1039 Bend R= 0.152m K= 5.26 90. 1.387
PT 1037 Bend R= 0.152m K= 5.26 90. 0.792
PT 1035 Bend R= 0.152m K= 5.26 90. 0.504
AR S123 Ext. friction support 0. 1.609
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1031 Bend R= 0.152m K= 5.26 90. 0.336
PT 1029 Bend R= 0.152m K= 5.26 90. 1.755
PT 1027 Bend R= 0.152m K= 5.26 90. 2.809
PT 1025 Bend R= 0.152m K= 5.26 90. 0.458
AR S122 Ext. friction support 0. 0.374
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S121 Ext. friction support 0. 3.000
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1019 Bend R= 0.152m K= 5.26 90. 4.320
PT 1017 Bend R= 0.152m K= 5.26 90. 0.610
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 69
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

AR S120 Ext. friction support 0. 0.987

Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
AR S119 Ext. friction support 0. 3.458
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
EM ~201 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 1.353
PT 9275 Straight on 0. 0.084
PT 9277 Straight on 0. 1.157
EM ~200 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
AR S118 Ext. friction support 0. 0.725
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -1.0 1.0 µXY=0.300 µZY=0.300 52257.96
Z 0.0 999.9 µXZ=0.300 µYZ=0.300 52257.96
PT 1099 Straight on 0. 2.053
PT 281 Coupling with line 94 0. 0.105
PT 283 Straight on 0. 0.105
PT 285 Bend R= 0.152m K= 5.26 90. 0.563
EM ~197 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 1.466
PT 289 Straight on 0. 0.084
PT 291 Straight on 0. 0.309
PT 293 Straight on 0. 0.365
EM 8971 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
PT 295 Straight on 0. 0.002
PT 297 Coupling with line 99 0. 0.105
PT 299 Straight on 0. 0.105
EM 8969 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.002
PT 305 Straight on 0. 0.084
PT 307 Straight on 0. 0.328
EM ~196 Point mass (kg) MWX= 11.3 MWY= 11.3 MWZ= 11.3 0. 0.084
AR S117 Ext. friction support 0. 0.029
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 52257.96
Y -2.0 2.0 µXY=0.300 µZY=0.300 52257.96
AR BC04 Ext. friction support 0.688
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X 0.0 0.0 µYX=0.300 µZX=0.300 310.000
Y 0.0 0.0 µXY=0.300 µZY=0.300 310.000
Z 0.0 0.0 µXZ=0.300 µYZ=0.300 310.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 70
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

TOPOLOGY OF LINES AND BOUNDARY CONDITIONS

----------------------------------------- ANGLE DLK
Op point statical operation (deg) (m)

L i n e 97

PT 9413 Coupling with line 89

AR EQ06 Ext. friction support 1.480
Bearing Gap(mm) Resist. Friction Coeff. µWQ Spring Preload
in from to (kN) Displ. W + Force Q (kN/m) (kN)
X -2.0 2.0 µYX=0.300 µZX=0.300 1000000.
Z 0.0 2.0 µXZ=0.300 µYZ=0.300 1000000.

L i n e 98

PT 9415 Coupling with line 89

ST EQ05 Support Anchorpoint 1.480

L i n e 99

PT 297 Coupling with line 96

TF $080 TFS-branch spring (STIFF) 0.054
PT 315 Straight on 0. 0.035
EM ~202 Point mass (kg) MWX= 4.1 MWY= 4.1 MWZ= 4.1 0. 0.128
PT 317 Straight on 0. 0.068
EM 319 Point mass (kg) MWX= 1.6 MWY= 1.6 MWZ= 1.6 0.225
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 71
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

0.000 5100.000 0.000 - ROHR2 Internal Point of Origin Coordinate

674.110 5072.644 96.376 N8 - 674.110 -27.357 96.376 VUU
674.110 5072.627 96.376 A117 N8 0.000 -0.016 0.000 PGR
674.111 5072.618 96.376 1787 A117 0.000 -0.010 0.000 KUH

674.111 5072.573 96.376 1785 1787 0.000 -0.044 0.000 RKR

alpha= 10.00
674.111 5072.529 96.376 9459 1785 0.000 -0.044 0.000 PGR
674.112 5072.326 96.376 1781 - 674.112 -27.674 96.376 BGL 0.038

673.588 5072.324 96.376 S96 - 673.588 -27.676 96.376 PGR

673.064 5072.321 96.376 1779 - 673.064 -27.679 96.376 BGL 0.038

673.064 5072.321 96.540 1777 - 673.064 -27.679 96.540 BGL 0.038

673.061 5073.084 96.540 S95 - 673.061 -26.916 96.540 PGR

673.058 5073.846 96.540 1775 S95 -0.003 0.762 0.000 KUH

673.057 5073.922 96.540 1773 1775 -0.000 0.076 0.000 KUH

673.056 5074.107 96.540 1771 - 673.056 -25.893 96.540 BGL 0.038

673.236 5074.108 96.540 1769 - 673.236 -25.892 96.540 KUH

673.382 5074.109 96.540 1735 1769 0.146 0.001 0.000 TWA

673.383 5074.009 96.540 1733 - 673.383 -25.991 96.540 TWA
673.384 5073.809 96.540 1731 1733 0.001 -0.200 0.000 TWA
673.384 5073.623 96.540 1729 - 673.384 -26.377 96.540 VUU
673.386 5073.258 96.540 1727 1729 0.002 -0.365 0.000 VUU
673.387 5073.072 96.540 1725 - 673.387 -26.928 96.540 TWA
673.387 5072.973 96.540 9237 1725 0.000 -0.100 0.000 VUU
673.387 5072.910 96.540 9205 9237 0.000 -0.063 0.000 BGL 0.152

673.387 5072.865 96.584 S97 9205 0.000 -0.045 0.044 PGR

673.388 5072.820 96.629 9203 - 673.388 -27.180 96.629 BGL 0.152

673.388 5072.820 97.537 1721 - 673.388 -27.180 97.537 BGL 0.152

673.845 5072.822 97.537 1709 - 673.845 -27.178 97.537 TTU

674.110 5072.823 97.537 1711 - 674.110 -27.177 97.537 BGL 0.152

674.110 5072.823 97.235 1713 - 674.110 -27.177 97.235 PGR

674.110 5072.823 97.184 1715 1713 0.000 0.000 -0.051 RKR
alpha= 13.00
674.110 5072.823 97.133 1717 1715 0.000 0.000 -0.051 PGR
674.110 5072.823 97.131 A035 1717 0.000 0.000 -0.002 PGR
674.110 5072.823 97.053 N7 A035 0.000 0.000 -0.078 VUU
673.382 5074.559 96.540 S66 - 673.382 -25.441 96.540 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 72
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

673.382 5074.833 96.540 9209 - 673.382 -25.167 96.540 BGL 0.152

ne= 1.00
673.382 5074.834 96.694 9235 - 673.382 -25.166 96.694 PGR
673.382 5074.834 96.778 1745 9235 0.000 0.000 0.084 VUU
673.382 5074.834 97.109 1747 1745 0.000 0.000 0.331 VUU
673.378 5074.837 98.441 1749 - 673.378 -25.163 98.441 BGL 0.152

676.380 5074.848 98.441 S65 - 676.380 -25.152 98.441 PGR

678.620 5074.858 98.441 1229 S65 2.240 0.011 0.000 VUU
678.725 5074.859 98.441 1187 1229 0.105 0.000 0.000 TFS
678.830 5074.859 98.441 1235 1187 0.105 0.000 0.000 PGR
680.777 5074.867 98.441 1237 - 680.777 -25.133 98.441 BGL 0.152

680.778 5074.061 98.441 S64 - 680.778 -25.939 98.441 PGR

680.792 5070.661 98.441 S47 S64 0.014 -3.401 0.000 VUU
680.795 5069.987 98.441 1241 - 680.795 -30.013 98.441 BGL 0.152

681.903 5069.992 98.441 1243 - 681.903 -30.008 98.441 BGL 0.152

681.905 5069.488 98.441 1245 - 681.905 -30.512 98.441 BGL 0.152

681.905 5069.488 99.593 S63 - 681.905 -30.512 99.593 PGR

681.905 5069.488 105.373 S62 S63 0.000 0.000 5.780 PGR
681.905 5069.488 105.895 1247 - 681.905 -30.512 105.895 BGL 0.152

681.402 5069.486 105.895 1249 - 681.402 -30.514 105.895 BGL 0.152

681.404 5069.007 105.895 1251 - 681.404 -30.993 105.895 BGL 0.152

681.404 5069.007 106.778 1253 - 681.404 -30.993 106.778 BGL 0.152

681.405 5068.755 106.778 S61 - 681.405 -31.245 106.778 PGR

681.412 5067.116 106.778 S46 S61 0.007 -1.639 0.000 VUU
681.421 5064.747 106.778 1257 - 681.421 -35.253 106.778 BGL 0.152

681.421 5064.747 110.498 1259 - 681.421 -35.253 110.498 BGL 0.152

682.161 5064.750 110.498 S60 - 682.161 -35.250 110.498 VUU

688.161 5064.774 110.498 S59 S60 6.000 0.025 0.000 VUU
694.161 5064.799 110.498 S58 S59 6.000 0.025 0.000 VUU
700.161 5064.824 110.498 S57 S58 6.000 0.025 0.000 VUU
706.161 5064.849 110.498 S55 S57 6.000 0.025 0.000 VUU
712.161 5064.873 110.498 S54 S55 6.000 0.025 0.000 VUU
718.161 5064.897 110.498 S53 S54 6.000 0.025 0.000 VUU
724.161 5064.922 110.498 S52 S53 6.000 0.025 0.000 VUU
730.161 5064.947 110.498 S51 S52 6.000 0.025 0.000 VUU
736.161 5064.972 110.498 S49 S51 6.000 0.025 0.000 VUU
742.161 5064.996 110.498 S48 S49 6.000 0.025 0.000 VUU
745.161 5065.008 110.498 S45 S48 3.000 0.012 0.000 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 73
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

748.161 5065.021 110.498 S34 S45 3.000 0.012 0.000 VUU

751.160 5065.033 110.498 S44 S34 2.999 0.012 0.000 PGR
752.448 5065.038 110.498 1285 - 752.448 -34.962 110.498 BGL 0.152

752.448 5065.038 107.530 S43 - 752.448 -34.962 107.530 PGR

752.448 5065.038 105.027 1287 - 752.448 -34.962 105.027 BGL 0.152

752.445 5065.718 105.027 1289 - 752.445 -34.282 105.027 BGL 0.152

752.445 5065.718 101.530 S42 - 752.445 -34.282 101.530 PGR

752.445 5065.718 100.496 1291 - 752.445 -34.282 100.496 BGL 0.152

752.449 5064.718 100.496 S41 - 752.449 -35.282 100.496 PGR

752.458 5062.480 100.496 S33 S41 0.009 -2.237 0.000 VUU
752.462 5061.650 100.496 A055 S33 0.003 -0.831 -0.000 PGR
752.468 5060.144 100.496 1295 - 752.468 -39.857 100.496 BGL 0.152

753.415 5060.147 100.496 1297 - 753.415 -39.853 100.496 BGL 0.152

753.415 5060.147 99.982 S40 - 753.415 -39.853 99.982 PGR

753.415 5060.147 99.782 1299 S40 0.000 0.000 -0.200 PGR
753.415 5060.147 99.677 1301 1299 0.000 0.000 -0.105 TFS
753.415 5060.147 99.573 1303 1301 0.000 0.000 -0.105 PGR
753.415 5060.147 97.593 1305 - 753.415 -39.853 97.593 VUU
753.415 5060.147 97.279 1307 1305 0.000 0.000 -0.314 VUU
753.415 5060.147 96.530 9239 - 753.415 -39.853 96.530 BGL 0.152

753.459 5060.147 96.485 S39 - 753.459 -39.853 96.485 PGR

753.504 5060.147 96.441 9241 S39 0.045 0.000 -0.044 BGL 0.152

753.567 5060.148 96.441 9255 9241 0.063 0.000 0.000 VUU

753.666 5060.148 96.441 1311 9255 0.099 0.000 0.000 TWA
753.766 5060.149 96.441 1313 1311 0.100 0.000 0.000 PGR
753.817 5060.149 96.441 1315 1313 0.051 0.000 0.000 RKR
alpha= 13.00
753.868 5060.149 96.441 1317 1315 0.051 0.000 0.000 VUU
753.870 5060.149 96.441 A032 1317 0.002 0.000 0.000 PGR
753.948 5060.149 96.441 1319 A032 0.078 0.000 0.000 VUU
754.275 5060.151 96.441 1321 1319 0.327 0.001 0.000 VUU
754.353 5060.151 96.441 A033 1321 0.078 0.000 0.000 PGR
754.355 5060.151 96.441 1323 A033 0.002 0.000 0.000 VUU
754.406 5060.151 96.441 1325 1323 0.051 0.000 0.000 RKR
alpha= 13.00
754.457 5060.151 96.441 1327 1325 0.051 0.000 0.000 PGR
754.557 5060.152 96.441 1329 1327 0.100 0.000 0.000 TWA
754.820 5060.153 96.441 9245 - 754.820 -39.847 96.441 BGL 0.152

754.864 5060.153 96.485 S38 - 754.864 -39.847 96.485 PGR

754.909 5060.153 96.530 9247 S38 0.044 0.000 0.045 BGL 0.152
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 74
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

754.909 5060.153 96.593 9257 9247 0.000 0.000 0.063 PGR

754.909 5060.153 97.279 1333 - 754.909 -39.847 97.279 VUU
754.909 5060.153 97.593 1335 1333 0.000 0.000 0.314 VUU
754.909 5060.153 99.692 1339 - 754.909 -39.847 99.692 VUU
754.909 5060.153 99.797 1341 1339 0.000 0.000 0.105 TFS
754.909 5060.153 99.901 1343 1341 0.000 0.000 0.105 VUU
754.909 5060.153 100.101 S37 1343 0.000 0.000 0.200 PGR
754.909 5060.153 100.496 1345 - 754.909 -39.847 100.496 BGL 0.152

754.909 5060.305 100.496 1347 - 754.909 -39.695 100.496 VUU

754.909 5060.458 100.496 1349 1347 0.000 0.153 0.000 BGL 0.152

752.967 5060.450 100.496 1351 - 752.967 -39.550 100.496 BGL 0.152

752.962 5061.650 100.496 A054 - 752.962 -38.350 100.496 PGR

752.959 5062.480 100.496 S30 A054 -0.003 0.831 0.000 VUU
752.949 5064.720 100.496 S36 S30 -0.009 2.239 0.000 PGR
752.945 5065.720 100.496 1 - 752.945 -34.280 100.496 BGL 0.152

752.945 5065.720 101.530 S35 - 752.945 -34.280 101.530 PGR

752.945 5065.720 107.530 S29 S35 0.000 0.000 6.000 PGR
752.945 5065.720 109.711 1361 - 752.945 -34.280 109.711 BGL 0.152

752.947 5065.340 109.711 1363 - 752.947 -34.660 109.711 BGL 0.152

752.947 5065.340 110.398 1365 - 752.947 -34.660 110.398 BGL 0.152

751.160 5065.333 110.398 S32 - 751.160 -34.667 110.398 PGR

748.160 5065.321 110.398 S27 S32 -3.000 -0.012 0.000 VUU
745.160 5065.309 110.398 S31 S27 -3.000 -0.012 0.000 VUU
742.160 5065.296 110.398 S28 S31 -3.000 -0.012 0.000 VUU
739.160 5065.284 110.398 S26 S28 -3.000 -0.012 0.000 VUU
736.160 5065.271 110.398 S25 S26 -3.000 -0.012 0.000 VUU
733.160 5065.259 110.398 S24 S25 -3.000 -0.012 0.000 VUU
730.160 5065.247 110.398 S23 S24 -3.000 -0.012 0.000 VUU
727.160 5065.234 110.398 S22 S23 -3.000 -0.012 0.000 VUU
724.160 5065.222 110.398 S21 S22 -3.000 -0.012 0.000 VUU
721.160 5065.210 110.398 S20 S21 -3.000 -0.012 0.000 VUU
718.160 5065.198 110.398 S19 S20 -3.000 -0.012 0.000 VUU
715.160 5065.186 110.398 S18 S19 -3.000 -0.012 0.000 VUU
712.160 5065.173 110.398 S17 S18 -3.000 -0.012 0.000 VUU
709.160 5065.161 110.398 S16 S17 -3.000 -0.012 0.000 VUU
706.160 5065.148 110.398 S15 S16 -3.000 -0.012 0.000 VUU
703.160 5065.136 110.398 S14 S15 -3.000 -0.012 0.000 VUU
700.160 5065.124 110.398 S13 S14 -3.000 -0.012 0.000 VUU
697.160 5065.111 110.398 S12 S13 -3.000 -0.012 0.000 VUU
694.160 5065.099 110.398 S11 S12 -3.000 -0.012 0.000 VUU
691.160 5065.087 110.398 S10 S11 -3.000 -0.012 0.000 VUU
688.160 5065.075 110.398 S9 S10 -3.000 -0.012 0.000 VUU
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 75
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

685.160 5065.062 110.398 S8 S9 -3.000 -0.012 0.000 VUU

682.160 5065.050 110.398 S7 S8 -3.000 -0.012 0.000 VUU
679.160 5065.038 110.398 S6 S7 -3.000 -0.012 0.000 VUU
676.160 5065.025 110.398 S5 S6 -3.000 -0.012 0.000 VUU
673.482 5065.015 110.398 1419 - 673.482 -34.986 110.398 BGL 0.152

673.482 5065.015 111.139 1421 - 673.482 -34.986 111.139 BGL 0.152

673.484 5064.705 111.139 S4 - 673.484 -35.296 111.139 PGR

673.494 5062.108 111.139 S3 S4 0.011 -2.596 0.000 VUU
673.508 5058.696 111.139 S2 S3 0.014 -3.412 0.000 VUU
673.517 5056.602 111.139 1427 - 673.517 -43.399 111.139 BGL 0.152

673.517 5056.602 112.639 S1 - 673.517 -43.399 112.639 PGR

673.517 5056.602 118.135 1429 - 673.517 -43.399 118.135 BGL 0.152

674.019 5056.604 118.135 1431 - 674.019 -43.396 118.135 BGL 0.152

674.012 5058.355 118.135 1433 - 674.012 -41.645 118.135 PGR

674.012 5058.460 118.135 1435 1433 -0.000 0.105 0.000 TFS
673.383 5074.009 96.394 1763 - 673.383 -25.991 96.394 KUH

673.383 5074.009 96.318 1765 1763 0.000 0.000 -0.076 KUH

678.725 5074.859 98.336 1185 - 678.725 -25.141 98.336 VUU

678.725 5074.859 97.109 1183 - 678.725 -25.141 97.109 VUU
678.725 5074.859 96.778 1181 1183 0.000 0.000 -0.331 VUU
678.725 5074.859 96.694 9227 1181 0.000 0.000 -0.084 PGR
678.725 5074.859 96.540 9221 - 678.725 -25.141 96.540 BGL 0.152
ne= 1.00
678.725 5074.577 96.540 S91 - 678.725 -25.423 96.540 PGR
678.726 5074.127 96.540 1171 S91 0.000 -0.450 0.000 TWA
678.726 5074.027 96.540 1169 1171 0.000 -0.100 0.000 TWA
678.727 5073.827 96.540 1167 1169 0.001 -0.200 0.000 TWA
678.728 5073.641 96.540 1165 - 678.728 -26.359 96.540 VUU
678.729 5073.277 96.540 1163 1165 0.002 -0.365 0.000 VUU
678.730 5073.091 96.540 1161 - 678.730 -26.909 96.540 TWA
678.730 5072.994 96.540 9229 1161 0.000 -0.096 0.000 VUU
678.730 5072.931 96.540 9217 9229 0.000 -0.063 0.000 BGL 0.152

678.731 5072.887 96.584 S94 9217 0.000 -0.045 0.044 PGR

678.731 5072.842 96.629 9215 - 678.731 -27.158 96.629 BGL 0.152

678.731 5072.842 97.537 1157 - 678.731 -27.158 97.537 BGL 0.152

679.191 5072.844 97.537 1145 - 679.191 -27.156 97.537 TTU

679.460 5072.845 97.537 1147 - 679.460 -27.155 97.537 BGL 0.152

679.460 5072.845 97.235 1149 - 679.460 -27.155 97.235 PGR

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 76
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

679.460 5072.845 97.184 1151 1149 0.000 0.000 -0.051 RKR

alpha= 13.00
679.460 5072.845 97.133 1153 1151 0.000 0.000 -0.051 VUU
679.460 5072.845 97.131 A036 1153 0.000 0.000 -0.002 PGR
679.460 5072.845 97.053 N9 A036 0.000 0.000 -0.078 VUU
678.580 5074.127 96.540 1207 - 678.580 -25.873 96.540 KUH

678.407 5074.126 96.540 1209 - 678.407 -25.874 96.540 BGL 0.038

678.408 5073.941 96.540 1211 - 678.408 -26.059 96.540 KUH

678.408 5073.865 96.540 1213 1211 0.000 -0.076 0.000 KUH

678.411 5073.104 96.540 S92 1213 0.003 -0.761 0.000 PGR

678.414 5072.343 96.540 1215 - 678.414 -27.657 96.540 BGL 0.038

678.414 5072.346 96.376 9455 - 678.414 -27.655 96.376 BGL 0.038

678.938 5072.347 96.376 S93 - 678.938 -27.653 96.376 PGR

679.462 5072.348 96.376 1217 - 679.462 -27.652 96.376 BGL 0.038

679.461 5072.550 96.376 9457 - 679.461 -27.450 96.376 PGR

679.461 5072.595 96.376 1223 9457 -0.000 0.044 0.000 RKR
alpha= 10.00
679.460 5072.639 96.376 356 1223 -0.000 0.044 0.000 PGR
679.460 5072.649 96.376 A116 356 -0.000 0.010 0.000 PGR
679.460 5072.666 96.376 N10 A116 -0.000 0.016 0.000 VUU
753.666 5060.148 96.295 1565 - 753.666 -39.852 96.295 KUH

753.666 5060.148 96.218 1567 1565 0.000 0.000 -0.076 KUH

678.726 5074.027 96.394 1201 - 678.726 -25.973 96.394 KUH

678.726 5074.027 96.318 1203 1201 0.000 0.000 -0.076 KUH

673.845 5072.822 97.683 1707 - 673.845 -27.178 97.683 VUU

673.845 5072.822 97.743 1705 1707 0.000 0.000 0.060 VUU
753.415 5060.042 99.677 1437 - 753.415 -39.958 99.677 PGR
753.415 5059.690 99.677 1439 - 753.415 -40.310 99.677 BGL 0.152

753.415 5059.690 97.593 1441 - 753.415 -40.310 97.593 VUU

753.415 5059.690 97.279 1443 1441 0.000 0.000 -0.314 VUU
753.415 5059.690 96.530 A046 - 753.415 -40.310 96.530 BGL 0.152

753.415 5059.646 96.485 S78 A046 0.000 -0.045 -0.045 PGR

753.415 5059.601 96.441 A047 S78 0.000 -0.045 -0.045 BGL 0.152

753.415 5059.438 96.441 1447 - 753.415 -40.562 96.441 TWA

753.415 5059.338 96.441 1449 1447 0.000 -0.100 0.000 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 77
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

753.415 5059.287 96.441 1451 1449 0.000 -0.051 0.000 RKR

alpha= 13.00
753.415 5059.236 96.441 1453 1451 0.000 -0.051 0.000 PGR
753.415 5059.234 96.441 A040 1453 0.000 -0.002 0.000 PGR
753.415 5059.156 96.441 1455 A040 0.000 -0.078 0.000 VUU
753.415 5058.830 96.441 1457 1455 0.000 -0.327 0.000 VUU
753.415 5058.752 96.441 A041 1457 0.000 -0.078 0.000 PGR
753.415 5058.750 96.441 1459 A041 0.000 -0.002 0.000 PGR
753.415 5058.699 96.441 1461 1459 0.000 -0.051 0.000 RKR
alpha= 13.00
753.415 5058.648 96.441 1463 1461 0.000 -0.051 0.000 PGR
753.415 5058.296 96.441 A049 - 753.415 -41.704 96.441 BGL 0.152

753.415 5058.296 97.279 1467 - 753.415 -41.704 97.279 VUU

753.415 5058.296 97.593 1469 1467 0.000 0.000 0.314 VUU
753.415 5058.296 98.435 1471 - 753.415 -41.704 98.435 BGL 0.152

754.192 5058.296 98.435 S79 - 754.192 -41.704 98.435 VUU

755.273 5058.296 98.435 1475 - 755.273 -41.704 98.435 BGL 0.152

755.273 5058.296 100.274 1477 - 755.273 -41.704 100.274 BGL 0.152

758.448 5058.309 100.274 S80 - 758.448 -41.691 100.274 PGR

760.188 5058.316 100.274 S71 S80 1.741 0.007 0.000 VUU
760.969 5058.319 100.274 1481 - 760.969 -41.681 100.274 BGL 0.152

760.969 5058.319 101.835 1483 - 760.969 -41.681 101.835 BGL 0.152

760.972 5057.590 101.835 S82 - 760.972 -42.410 101.835 VUU

760.978 5056.041 101.835 1487 - 760.978 -43.959 101.835 BGL 0.152

760.524 5056.039 101.835 1489 - 760.524 -43.961 101.835 BGL 0.152

760.536 5053.088 101.835 S83 - 760.536 -46.912 101.835 VUU

760.553 5049.052 101.835 1493 - 760.553 -50.948 101.835 BGL 0.152

760.704 5049.053 101.835 1495 - 760.704 -50.947 101.835 VUU

760.857 5049.054 101.835 1497 1495 0.152 0.001 0.000 BGL 0.152

760.859 5048.590 101.835 S84 - 760.859 -51.410 101.835 VUU

760.865 5047.056 101.835 1501 - 760.865 -52.944 101.835 BGL 0.152

760.865 5047.056 104.501 1503 - 760.865 -52.944 104.501 BGL 0.152

760.867 5046.590 104.501 S85 - 760.867 -53.410 104.501 VUU

760.871 5045.658 104.501 1507 - 760.871 -54.342 104.501 BGL 0.152

760.871 5045.658 104.942 1509 - 760.871 -54.342 104.942 BGL 0.152

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 78
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

763.240 5045.668 104.942 S86 - 763.240 -54.332 104.942 VUU

766.238 5045.681 104.942 S87 S86 2.998 0.012 0.000 PGR
766.696 5045.685 104.942 1513 - 766.696 -54.315 104.942 BGL 0.152

766.704 5043.616 104.942 S88 - 766.704 -56.384 104.942 VUU

766.709 5042.562 104.942 1517 - 766.709 -57.438 104.942 BGL 0.152

767.814 5042.563 104.942 1519 - 767.814 -57.436 104.942 BGL 0.152

767.830 5038.682 104.942 S89 - 767.830 -61.319 104.942 PGR

767.835 5037.637 104.942 1521 - 767.835 -62.363 104.942 BGL 0.152

766.843 5037.633 104.942 1523 - 766.843 -62.367 104.942 BGL 0.152

766.844 5037.633 101.595 9507 - 766.844 -62.367 101.595 BGL 0.152

766.845 5037.189 101.595 A004 - 766.845 -62.811 101.595 PGR

766.847 5036.745 101.595 1529 A004 0.002 -0.444 0.000 PGR
766.847 5036.640 101.595 1531 1529 0.000 -0.105 0.000 TFS
766.848 5036.535 101.595 1533 1531 0.000 -0.105 0.000 PGR
766.849 5036.083 101.595 A031 - 766.849 -63.917 101.595 BGL 0.152

766.849 5036.083 101.755 A034 - 766.849 -63.917 101.755 PGR

766.850 5036.083 104.156 1537 - 766.850 -63.917 104.156 BGL 0.152

765.750 5036.079 104.156 1539 - 765.750 -63.921 104.156 BGL 0.152

765.750 5036.079 103.804 1541 - 765.750 -63.921 103.804 PGR

765.750 5036.079 103.699 1543 1541 0.000 0.000 -0.105 PGR
765.750 5036.079 103.629 1545 1543 0.000 0.000 -0.070 RKR
alpha= 19.00
765.750 5036.079 103.559 1547 1545 0.000 0.000 -0.070 VUU
765.750 5036.079 103.557 A083 1547 0.000 0.000 -0.002 PGR
765.750 5036.079 103.460 N5 A083 0.000 0.000 -0.097 VUU
765.750 5036.079 102.410 9129 - 765.750 -63.921 102.410 TFS
753.415 5059.438 96.295 1551 - 753.415 -40.562 96.295 KUH

753.415 5059.438 96.218 1553 1551 0.000 0.000 -0.076 KUH

754.557 5060.152 96.295 1571 - 754.557 -39.848 96.295 KUH

754.557 5060.152 96.218 1573 1571 0.000 0.000 -0.076 KUH

679.192 5072.844 97.683 1143 - 679.192 -27.156 97.683 VUU

679.192 5072.844 97.743 1141 1143 0.000 0.000 0.060 VUU
673.384 5073.809 96.686 1761 - 673.384 -26.191 96.686 VUU
673.384 5073.809 96.964 1759 - 673.384 -26.191 96.964 BGL 0.029

673.385 5073.467 96.964 1757 - 673.385 -26.532 96.964 VUU

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 79
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

673.385 5073.404 96.964 1755 1757 0.000 -0.064 0.000 VUU

673.387 5073.072 96.964 1753 - 673.387 -26.928 96.964 BGL 0.029

673.387 5073.072 96.686 1751 - 673.387 -26.928 96.686 VUU

766.848 5036.640 101.684 1557 - 766.848 -63.360 101.684 VUU
766.848 5036.640 101.686 A042 1557 0.000 0.000 0.002 PGR
766.848 5036.640 101.754 1559 A042 0.000 0.000 0.068 VUU
766.849 5036.640 101.979 1561 1559 0.001 0.000 0.225 VUU
766.849 5036.083 101.585 S90 - 766.849 -63.917 101.585
765.754 5035.124 102.410 9125 - 765.754 -64.876 102.410 TFS
765.754 5035.123 102.410 9131 9125 0.000 -0.001 0.000 TFS
765.756 5034.543 102.410 9127 9131 0.002 -0.579 0.000 PGR
765.748 5036.484 102.410 9997 - 765.748 -63.516 102.410 PGR
765.737 5039.134 102.410 9998 9997 -0.011 2.650 0.000 PGR
765.734 5039.719 102.410 9137 9998 -0.003 0.585 0.000 TFS
765.728 5041.201 102.410 9135 9137 -0.006 1.482 0.000 PGR
765.754 5035.124 101.360 N1 - 765.754 -64.876 101.360 PGR
765.754 5035.124 100.227 1801 - 765.754 -64.876 100.227 VUU
765.754 5035.124 100.114 1803 - 765.754 -64.876 100.114 VUU
765.754 5035.124 99.810 1805 1803 0.000 0.000 -0.305 BGL 0.305
ne= 1.00
765.740 5038.398 99.810 1807 - 765.740 -61.602 99.810 BGL 0.305

763.859 5038.391 99.810 S218 - 763.859 -61.610 99.810 PGR

763.354 5038.389 99.810 1811 - 763.354 -61.612 99.810 BGL 0.305

763.354 5038.389 97.903 1813 - 763.354 -61.612 97.903 BGL 0.305

764.767 5038.394 96.490 1815 - 764.767 -61.606 96.490 BGL 0.305

765.399 5038.397 96.490 1817 - 765.399 -61.603 96.490 BGL 0.305

ne= 1.00
765.398 5038.702 96.490 1819 1817 -0.001 0.305 0.000 VUU
765.398 5038.814 96.490 1821 - 765.398 -61.186 96.490 VUU
765.398 5038.830 96.490 1823 1821 -0.000 0.016 0.000
765.398 5038.845 96.490 1825 1823 -0.000 0.016 0.000 VUU
765.395 5039.592 96.490 D027 - 765.395 -60.408 96.490 BGL 0.305

765.700 5039.593 96.490 D025 - 765.700 -60.407 96.490 VUU

765.878 5039.594 96.490 C943 D025 0.178 0.001 0.000 TEX

765.878 5039.416 96.490 C941 - 765.878 -60.584 96.490 PGR

765.879 5039.340 96.477 C047 C941 0.000 -0.076 -0.013 RKR
alpha= 18.00
765.879 5039.264 96.465 C045 C047 0.000 -0.076 -0.013 PGR
765.879 5039.262 96.465 A089 C045 0.000 -0.002 0.000 PGR
765.879 5039.165 96.465 C043 A089 0.000 -0.097 0.000 VUU
765.881 5038.757 96.465 C041 C043 0.002 -0.408 0.000 VUU
765.883 5038.304 96.465 C039 C041 0.002 -0.454 0.000 VUU
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 80
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

765.883 5038.207 96.465 A088 C039 0.000 -0.097 0.000 PGR

765.883 5038.205 96.465 C037 A088 0.000 -0.002 0.000 PGR
765.884 5038.135 96.451 C035 C037 0.000 -0.070 -0.014 RKR
alpha= 19.00
765.884 5038.065 96.438 C033 C035 0.000 -0.070 -0.014 PGR
765.884 5038.063 96.438 9031 C033 0.000 -0.002 0.000 PGR
765.884 5037.979 96.438 C031 9031 0.000 -0.084 0.000 VUU
765.886 5037.602 96.438 C029 C031 0.002 -0.377 0.000 VUU
765.886 5037.518 96.438 9029 C029 0.000 -0.084 0.000 PGR
765.886 5037.516 96.438 C027 9029 0.000 -0.002 0.000 VUU
765.887 5037.446 96.451 C025 C027 0.000 -0.070 0.014 RKR
alpha= 19.00
765.887 5037.375 96.465 9199 C025 0.000 -0.070 0.014 PGR
765.888 5037.040 96.465 9193 - 765.888 -62.960 96.465 BGL 0.229

765.888 5036.973 96.532 SE60 9193 0.000 -0.067 0.067 PGR

765.888 5036.906 96.599 9191 - 765.888 -63.094 96.599 BGL 0.229

765.888 5036.906 98.424 C017 - 765.888 -63.094 98.424 BGL 0.229

765.884 5037.878 98.424 C015 - 765.884 -62.122 98.424 VUU

765.883 5038.186 98.424 C013 - 765.883 -61.814 98.424 VUU
765.882 5038.488 98.424 C011 - 765.882 -61.512 98.424 VUU
765.875 5040.079 98.424 SE59 - 765.875 -59.921 98.424 VUU
765.866 5042.337 98.424 C007 - 765.866 -57.663 98.424 BGL 0.229

766.223 5042.339 98.424 C005 - 766.223 -57.661 98.424 PGR

766.366 5042.339 98.424 B929 C005 0.143 0.001 0.000 TFS
762.709 5043.936 105.774 9197 - 762.709 -56.064 105.774 PGR
763.209 5043.938 105.774 SE58 9197 0.500 0.002 0.000 VUU
765.768 5043.949 105.774 B907 - 765.768 -56.051 105.774 BGL 0.229

765.835 5043.949 105.707 SE57 - 765.835 -56.051 105.707 VUU

765.902 5043.949 105.640 B911 SE57 0.067 0.000 -0.067 BGL 0.229

765.902 5043.949 104.524 B913 - 765.902 -56.051 104.524 BGL 0.229

765.905 5043.159 104.524 B915 - 765.905 -56.841 104.524 VUU

765.907 5042.709 104.524 B917 - 765.907 -57.290 104.524 BGL 0.229

766.365 5042.711 104.524 B921 - 766.365 -57.289 104.524 BGL 0.229

766.365 5042.711 101.957 SE56 - 766.365 -57.289 101.957 VUU

766.365 5042.711 98.424 B925 - 766.365 -57.289 98.424 BGL 0.229

766.365 5042.482 98.424 B927 - 766.365 -57.518 98.424 VUU

766.367 5042.196 98.424 B931 B927 0.001 -0.286 0.000 PGR
766.367 5042.126 98.424 B933 B931 0.000 -0.070 0.000 RKR
alpha= 27.00
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 81
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

766.367 5042.057 98.424 B935 B933 0.000 -0.070 0.000 PGR

766.375 5040.081 98.424 SE55 B935 0.008 -1.975 0.000 VUU
766.380 5038.941 98.424 B939 - 766.380 -61.059 98.424 VUU
766.381 5038.739 98.424 B941 - 766.381 -61.261 98.424 VUU
766.384 5037.866 98.424 SE54 - 766.384 -62.134 98.424 VUU
766.387 5037.149 98.424 B945 SE54 0.003 -0.716 0.000 PGR
766.388 5037.080 98.424 B947 B945 0.000 -0.070 0.000 RKR
alpha= 27.00
766.388 5037.010 98.424 B949 B947 0.000 -0.070 0.000 PGR
766.389 5036.781 98.424 B951 - 766.389 -63.219 98.424 BGL 0.229

767.397 5036.785 98.424 B953 - 767.397 -63.215 98.424 BGL 0.229

767.397 5036.785 96.575 B955 - 767.397 -63.215 96.575 BGL 0.229

767.397 5036.852 96.508 SE53 B955 -0.000 0.067 -0.067 VUU

767.397 5036.919 96.441 B959 - 767.397 -63.081 96.441 BGL 0.229

767.396 5037.263 96.441 B963 - 767.396 -62.737 96.441 PGR

767.395 5037.333 96.421 B965 B963 -0.000 0.070 -0.020 RKR
alpha= 27.00
767.395 5037.403 96.401 B967 B965 -0.000 0.070 -0.020 PGR
767.395 5037.405 96.401 A050 B967 -0.000 0.002 0.000 PGR
767.395 5037.483 96.401 B969 A050 -0.000 0.078 0.000 VUU
767.393 5037.810 96.401 B971 B969 -0.001 0.327 0.000 VUU
767.393 5037.888 96.401 A051 B971 -0.000 0.078 0.000 PGR
767.393 5037.890 96.401 B973 A051 -0.000 0.002 0.000 PGR
767.393 5037.960 96.421 B975 B973 -0.000 0.070 0.020 RKR
alpha= 27.00
767.392 5038.030 96.441 B977 B975 -0.000 0.070 0.020 PGR
767.392 5038.032 96.441 A052 B977 -0.000 0.002 0.000 PGR
767.392 5038.129 96.441 SE52 A052 -0.000 0.097 0.000 VUU
765.735 5039.719 101.360 N6 - 765.735 -60.281 101.360 VUU
765.735 5039.718 101.032 1651 - 765.735 -60.282 101.032 BGL 0.229
ne= 1.00
765.964 5039.719 101.032 1647 - 765.964 -60.281 101.032 PGR
766.034 5039.719 101.019 1645 1647 0.070 0.000 -0.014 RKR
alpha= 19.00
766.104 5039.719 101.005 1643 1645 0.070 0.000 -0.014 PGR
766.188 5039.719 101.005 1641 1643 0.084 0.000 0.000 TWA
766.722 5039.721 101.006 9500 - 766.722 -60.280 101.006 BGL 0.152

766.722 5039.721 101.165 9567 - 766.722 -60.279 101.165 PGR

766.722 5039.721 100.995 S77 9567 0.000 0.000 -0.170
766.188 5039.719 100.837 1657 - 766.188 -60.281 100.837 BGL 0.038

766.188 5039.841 100.837 1659 - 766.188 -60.159 100.837 KUH

766.188 5039.917 100.837 1661 1659 0.000 0.076 0.000 KUH

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 82
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

766.722 5039.721 104.145 S76 - 766.722 -60.279 104.145 PGR

766.722 5039.721 104.397 1633 - 766.722 -60.279 104.397 BGL 0.152

767.826 5039.726 104.397 1631 - 767.826 -60.274 104.397 BGL 0.152

767.814 5042.549 104.397 1629 - 767.814 -57.451 104.397 BGL 0.152

766.708 5042.546 104.397 1627 - 766.708 -57.454 104.397 BGL 0.152

766.704 5043.616 104.397 S75 - 766.704 -56.384 104.397 VUU

766.693 5046.263 104.397 1623 - 766.693 -53.737 104.397 BGL 0.152

766.693 5046.263 104.942 1621 - 766.693 -53.737 104.942 BGL 0.152

766.238 5046.260 104.942 S74 - 766.238 -53.740 104.942 VUU

763.238 5046.248 104.942 S73 S74 -3.000 -0.012 0.000 VUU
761.168 5046.239 104.942 1615 - 761.168 -53.761 104.942 BGL 0.152

761.168 5046.239 104.401 1613 - 761.168 -53.761 104.401 BGL 0.152

761.167 5046.591 104.401 S72 - 761.167 -53.409 104.401 VUU

761.165 5047.057 104.401 1609 - 761.165 -52.943 104.401 BGL 0.152

761.165 5047.057 101.835 1607 - 761.165 -52.943 101.835 BGL 0.152

761.159 5048.591 101.835 S70 - 761.159 -51.409 101.835 VUU

761.156 5049.355 101.835 1603 - 761.156 -50.645 101.835 BGL 0.152

761.003 5049.354 101.835 1601 1603 -0.152 -0.001 0.000 VUU

760.852 5049.354 101.835 1599 - 760.852 -50.646 101.835 BGL 0.152

760.836 5053.090 101.835 S69 - 760.836 -46.910 101.835 VUU

760.826 5055.740 101.835 1595 - 760.826 -44.260 101.835 BGL 0.152

761.279 5055.742 101.835 1593 - 761.279 -44.258 101.835 BGL 0.152

761.272 5057.591 101.835 S68 - 761.272 -42.408 101.835 VUU

761.270 5058.021 101.835 1589 - 761.270 -41.980 101.835 BGL 0.152

761.270 5058.021 100.274 1587 - 761.270 -41.980 100.274 BGL 0.152

760.190 5058.016 100.274 S81 - 760.190 -41.984 100.274 VUU

758.572 5058.009 100.274 S67 S81 -1.618 -0.007 0.000 PGR
754.918 5057.994 100.274 1583 - 754.918 -42.006 100.274 BGL 0.152

754.918 5057.994 99.797 1579 - 754.918 -42.006 99.797 BGL 0.152

754.909 5060.048 99.797 1577 - 754.909 -39.951 99.797 PGR

678.727 5073.827 96.686 1199 - 678.727 -26.173 96.686 VUU
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 83
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

678.727 5073.827 96.964 1197 - 678.727 -26.173 96.964 BGL 0.029

678.728 5073.486 96.964 1195 - 678.728 -26.514 96.964 VUU

678.728 5073.422 96.964 1193 1195 0.000 -0.064 0.000 VUU
678.730 5073.091 96.964 1191 - 678.730 -26.909 96.964 BGL 0.029

678.730 5073.091 96.686 1189 - 678.730 -26.909 96.686 VUU

765.754 5035.124 103.460 N2 - 765.754 -64.876 103.460 PGR
765.754 5035.124 103.576 193 - 765.754 -64.876 103.576 VUU
765.754 5035.124 103.881 197 193 0.000 0.000 0.305 BGL 0.305
ne= 1.00
764.732 5035.120 103.881 207 - 764.732 -64.881 103.881 VUU
764.450 5035.118 103.881 205 - 764.450 -64.882 103.881 TWA
763.245 5035.113 103.881 225 - 763.245 -64.886 103.881 BGL 0.305

763.245 5035.113 100.850 201 - 763.245 -64.886 100.850 BGL 0.305

763.243 5035.758 100.850 S111 - 763.243 -64.242 100.850 VUU

763.234 5037.809 100.850 209 - 763.234 -62.191 100.850 BGL 0.305

763.234 5037.809 100.072 223 - 763.234 -62.191 100.072 BGL 0.305

763.275 5037.809 100.001 221 223 0.041 0.000 -0.071 VUU

763.446 5037.810 99.705 211 - 763.446 -62.190 99.705 BGL 0.305

763.446 5037.810 97.852 213 - 763.446 -62.190 97.852 BGL 0.305

764.808 5037.815 96.490 215 - 764.808 -62.185 96.490 BGL 0.305

765.440 5037.818 96.490 217 - 765.440 -62.182 96.490 BGL 0.305

765.442 5037.308 96.490 S112 - 765.442 -62.693 96.490 VUU

765.445 5036.563 96.490 237 - 765.445 -63.437 96.490 VUU
765.445 5036.547 96.490 231 237 0.000 -0.016 0.000
765.445 5036.532 96.490 227 231 0.000 -0.016 0.000 VUU
765.446 5036.419 96.490 4765 - 765.446 -63.581 96.490 VUU
765.446 5036.292 96.490 4767 4765 0.001 -0.126 0.000 BGL 0.305
ne= 1.00
764.862 5035.704 96.490 4771 - 764.862 -64.296 96.490 BGL 0.305

764.862 5035.704 97.267 N3 - 764.862 -64.296 97.267 VUU

764.862 5035.704 98.137 9111 - 764.862 -64.296 98.137 TFS
764.450 5035.118 104.028 117 - 764.450 -64.882 104.028 PGR
764.450 5035.118 104.883 115 - 764.450 -64.882 104.883 BGL 0.076

764.444 5036.572 104.886 113 - 764.444 -63.428 104.886 BGL 0.076

766.448 5036.581 104.890 111 - 766.448 -63.419 104.890 BGL 0.076

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 84
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

766.439 5038.676 104.894 S110 - 766.439 -61.324 104.894 PGR

766.425 5041.985 104.901 S109 S110 -0.014 3.309 0.007 PGR
766.421 5043.119 104.903 189 - 766.421 -56.881 104.903 BGL 0.076

766.421 5043.119 106.592 105 - 766.421 -56.881 106.592 BGL 0.076

766.106 5043.117 106.592 103 - 766.106 -56.883 106.592 VUU

766.042 5043.117 106.592 101 103 -0.064 -0.000 0.000 TFS
765.978 5043.117 106.593 99 101 -0.064 -0.000 0.000 VUU
765.183 5043.114 106.594 S108 99 -0.796 -0.003 0.002 VUU
764.759 5043.112 106.595 191 - 764.759 -56.888 106.595 BGL 0.076

764.763 5042.146 106.597 107 - 764.763 -57.855 106.597 BGL 0.076

764.765 5042.146 107.678 91 - 764.765 -57.855 107.678 BGL 0.076

764.615 5042.145 107.679 S107 - 764.615 -57.855 107.679 PGR

764.193 5042.143 107.679 89 - 764.193 -57.857 107.679 VUU
763.968 5042.142 107.680 87 89 -0.225 -0.001 0.000 VUU
763.799 5042.141 107.680 95 - 763.799 -57.859 107.680 TTU
763.624 5042.141 107.681 83 - 763.624 -57.859 107.681 BGL 0.076

763.624 5042.141 107.845 Y1 - 763.624 -57.859 107.845 PGR

763.624 5042.141 107.945 9139 Y1 0.000 0.000 0.100 PGR
763.625 5042.141 108.028 79 9139 0.000 0.000 0.083 RKR
alpha= 10.00
763.625 5042.141 108.110 77 79 0.000 0.000 0.083 PGR
763.625 5042.141 108.120 A115 77 0.000 0.000 0.010 PGR
763.625 5042.141 108.137 93 A115 0.000 0.000 0.017 VUU
763.625 5042.141 108.253 85 93 0.000 0.000 0.116
763.625 5042.255 108.253 71 85 -0.000 0.114 0.000 VUU
763.624 5042.419 108.253 SX1 - 763.624 -57.581 108.253 PGR
763.623 5042.660 108.252 69 SX1 -0.001 0.241 -0.000 TWA
764.855 5037.304 98.137 9996 - 764.855 -62.696 98.137 PGR
764.845 5039.904 98.137 9995 9996 -0.011 2.600 0.000 PGR
764.837 5041.762 98.137 9119 9995 -0.008 1.858 0.000 PGR
764.862 5035.703 98.137 9123 - 764.862 -64.297 98.137 TFS
764.865 5035.040 98.137 9121 9123 0.003 -0.664 0.000 PGR
763.799 5042.141 107.561 127 - 763.799 -57.859 107.561 VUU
763.798 5042.141 107.485 129 127 -0.000 0.000 -0.076 VUU
764.862 5035.705 99.007 9113 - 764.862 -64.296 99.007 PGR
765.748 5036.484 101.750 EQ3 - 765.748 -63.516 101.750
765.737 5039.134 101.750 EQ4 - 765.737 -60.866 101.750
765.877 5039.772 96.490 C945 - 765.877 -60.228 96.490 VUU
765.876 5040.079 96.490 SE61 C945 -0.001 0.307 0.000 VUU
765.875 5040.349 96.490 C949 SE61 -0.001 0.270 0.000 VUU
765.874 5040.527 96.490 C951 C949 -0.001 0.178 0.000 TFS
765.873 5040.705 96.490 9149 C951 -0.001 0.178 0.000 VUU
765.873 5040.707 96.490 A084 9149 -0.000 0.002 0.000 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 85
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

765.873 5040.817 96.490 9153 A084 -0.000 0.110 0.000 PGR

765.871 5041.245 96.490 D079 9153 -0.002 0.428 0.000 VUU
765.870 5041.355 96.490 A053 D079 -0.000 0.110 0.000 PGR
765.870 5041.357 96.490 C955 A053 -0.000 0.002 0.000 VUU
765.870 5041.433 96.477 9175 C955 -0.000 0.076 -0.013 RKR
alpha= 18.00
765.870 5041.509 96.465 9177 9175 -0.000 0.076 -0.013 PGR
765.870 5041.511 96.465 A086 9177 -0.000 0.002 0.000 PGR
765.869 5041.608 96.465 9185 A086 -0.000 0.097 0.000 PGR
765.869 5041.837 96.465 9183 9185 -0.001 0.229 0.000 PGR
765.868 5041.934 96.465 A087 9183 -0.000 0.097 0.000 PGR
765.868 5041.936 96.465 9187 A087 -0.000 0.002 0.000 PGR
765.868 5042.012 96.477 9155 9187 -0.000 0.076 0.013 RKR
alpha= 18.00
765.868 5042.088 96.490 9163 9155 -0.000 0.076 0.013 VUU
765.866 5042.465 96.490 C957 - 765.866 -57.534 96.490 BGL 0.305

765.866 5042.555 96.579 SE62 C957 -0.000 0.089 0.089 VUU

765.865 5042.644 96.669 C961 SE62 -0.000 0.089 0.089 BGL 0.305
ne= 1.00
765.865 5042.644 96.795 C963 C961 0.000 0.000 0.126 VUU
765.865 5042.644 96.907 C965 - 765.865 -57.356 96.907 VUU
765.865 5042.644 97.335 C967 C965 0.000 0.000 0.428 VUU
765.865 5042.644 97.445 A057 C967 0.000 0.000 0.110 PGR
765.865 5042.644 97.447 C969 A057 0.000 0.000 0.002 VUU
765.865 5042.644 97.625 C971 C969 0.000 0.000 0.178 TFS
765.865 5042.644 97.803 C973 C971 0.000 0.000 0.178 VUU
765.865 5042.644 102.300 C975 - 765.865 -57.356 102.300 BGL 0.305

765.858 5044.389 102.300 C977 - 765.858 -55.611 102.300 BGL 0.305

765.858 5044.389 103.122 C979 - 765.858 -55.611 103.122 BGL 0.305

765.769 5044.388 103.211 SE63 C979 -0.089 -0.000 0.089 VUU

765.679 5044.388 103.301 C983 SE63 -0.089 -0.000 0.089 BGL 0.305

763.208 5044.378 103.301 SE64 - 763.208 -55.622 103.301 VUU

762.708 5044.376 103.301 9147 SE64 -0.500 -0.002 0.000 PGR
765.874 5040.527 96.658 D059 - 765.874 -59.473 96.658 VUU
765.874 5040.527 97.625 D061 - 765.874 -59.473 97.625 BGL 0.229

765.644 5040.526 97.625 D063 - 765.644 -59.474 97.625 VUU

765.416 5040.525 97.625 D065 D063 -0.229 -0.001 0.000 BGL 0.229

765.410 5041.861 97.625 D067 - 765.410 -58.139 97.625 VUU

765.408 5042.315 97.625 9161 D067 -0.002 0.454 0.000 PGR
765.408 5042.415 97.625 D071 - 765.408 -57.586 97.625 PGR
765.407 5042.643 97.625 D073 D071 -0.001 0.229 0.000 BGL 0.229
ne= 1.00
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 86
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

765.697 5042.644 97.625 D075 - 765.697 -57.356 97.625 VUU

674.117 5058.460 118.135 1667 - 674.117 -41.539 118.135 VUU
674.812 5058.463 118.135 1669 - 674.812 -41.537 118.135 BGL 0.152

674.812 5058.463 117.392 1671 - 674.812 -41.537 117.392 PGR

674.812 5058.463 117.288 1673 1671 0.000 0.000 -0.105 TFS
674.812 5058.463 117.183 8993 1673 0.000 0.000 -0.105 PGR
674.812 5058.463 117.176 A037 8993 0.000 0.000 -0.007 PGR
674.812 5058.463 117.074 N12 A037 0.000 0.000 -0.102 VUU
674.812 5058.463 116.522 9261 - 674.812 -41.537 116.522 PGR
674.012 5058.460 116.522 2 9261 -0.800 -0.003 0.000
673.212 5058.457 116.522 9259 2 -0.800 -0.003 0.000 PGR
673.212 5058.457 117.074 N11 - 673.212 -41.543 117.074 VUU
673.212 5058.457 117.176 A038 N11 0.000 0.000 0.102 PGR
673.212 5058.457 117.183 8995 A038 0.000 0.000 0.007 PGR
673.212 5058.457 117.288 1685 8995 0.000 0.000 0.105 TFS
673.907 5058.459 118.135 1679 - 673.907 -41.540 118.135 VUU
673.212 5058.457 118.135 1681 - 673.212 -41.543 118.135 BGL 0.152

673.212 5058.457 117.392 1683 - 673.212 -41.543 117.392 PGR

673.123 5058.457 117.288 1691 - 673.123 -41.543 117.288 PGR
672.953 5058.457 117.288 1693 - 672.953 -41.543 117.288 VUU
672.728 5058.457 117.288 1695 1693 -0.225 0.000 0.000 VUU
766.042 5043.117 106.656 133 - 766.042 -56.883 106.656 VUU
766.043 5043.117 107.236 135 133 0.001 0.000 0.579 VUU
766.043 5043.117 107.300 73 135 0.000 0.000 0.064 TFS
766.044 5043.117 107.364 137 73 0.000 0.000 0.064 VUU
766.044 5043.117 107.676 139 - 766.044 -56.883 107.676 BGL 0.076

765.748 5043.116 107.676 141 - 765.748 -56.884 107.676 VUU

765.523 5043.115 107.677 143 141 -0.225 -0.001 0.000 VUU
765.354 5043.114 107.677 145 - 765.354 -56.886 107.677 TTU
765.179 5043.114 107.677 147 - 765.179 -56.886 107.677 BGL 0.076

765.180 5043.114 107.842 S98 - 765.180 -56.886 107.842 PGR

765.180 5043.114 107.942 9141 S98 0.000 0.000 0.100 PGR
765.180 5043.114 108.025 151 9141 0.000 0.000 0.083 RKR
alpha= 10.00
765.180 5043.114 108.107 153 151 0.000 0.000 0.083 PGR
765.180 5043.114 108.117 A114 153 0.000 0.000 0.010 PGR
765.180 5043.114 108.134 155 A114 0.000 0.000 0.017 VUU
765.180 5043.114 108.250 157 155 0.000 0.000 0.116
765.066 5043.113 108.250 159 157 -0.114 -0.000 0.000 VUU
764.902 5043.113 108.250 SX2 - 764.902 -56.887 108.250 PGR
764.861 5043.112 108.250 163 SX2 -0.041 -0.000 -0.000 TTU
766.107 5043.117 107.300 75 - 766.107 -56.883 107.300 VUU
766.327 5043.118 107.299 97 - 766.327 -56.882 107.299 VUU
766.603 5043.120 107.299 51 97 0.276 0.001 -0.001 VUU
766.849 5043.121 107.298 49 - 766.849 -56.880 107.298 BGL 0.076
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 87
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

766.844 5044.344 107.296 53 - 766.844 -55.656 107.296 BGL 0.076

766.844 5044.344 106.984 55 - 766.844 -55.656 106.984 BGL 0.076

766.248 5044.342 106.983 S99 - 766.248 -55.658 106.983 VUU

764.270 5044.334 106.979 41 S99 -1.978 -0.008 -0.004 VUU
764.206 5044.333 106.979 39 41 -0.064 -0.000 -0.000 TEX

764.142 5044.333 106.979 37 39 -0.064 -0.000 -0.000 VUU

763.680 5044.332 106.978 35 37 -0.462 -0.002 -0.001 VUU
763.616 5044.331 106.978 33 35 -0.064 -0.000 -0.000 TEX

763.552 5044.331 106.978 31 33 -0.064 -0.000 -0.000 VUU

763.248 5044.330 106.977 S100 31 -0.304 -0.001 -0.001 VUU
761.424 5044.322 106.973 S101 S100 -1.825 -0.007 -0.004 PGR
760.824 5044.320 106.972 43 - 760.824 -55.680 106.972 BGL 0.076

760.824 5044.320 106.461 45 - 760.824 -55.680 106.461 BGL 0.076

760.814 5046.588 106.456 S102 - 760.814 -53.412 106.456 VUU

760.811 5047.280 106.455 21 - 760.811 -52.720 106.455 BGL 0.076

760.811 5047.279 105.742 19 - 760.811 -52.720 105.742 BGL 0.076

760.554 5047.278 105.742 27 - 760.554 -52.722 105.742 BGL 0.076

760.549 5048.594 105.739 S104 - 760.549 -51.406 105.739 VUU

760.530 5053.088 105.730 S105 S104 -0.018 4.494 -0.009 PGR
760.512 5057.582 105.721 S106 S105 -0.018 4.494 -0.009 VUU
760.510 5057.988 105.720 11 - 760.510 -42.012 105.720 BGL 0.076

760.510 5057.988 104.268 15 - 760.510 -42.012 104.268 BGL 0.076

760.880 5057.989 104.268 17 - 760.880 -42.011 104.268 BGL 0.076

760.871 5060.149 104.264 9 - 760.871 -39.851 104.264 BGL 0.076

760.871 5060.149 103.541 7 - 760.871 -39.851 103.541 BGL 0.076

761.270 5060.151 103.141 25 - 761.270 -39.849 103.141 VUU

761.965 5060.154 102.443 T067 - 761.965 -39.846 102.443 PIE
i= 12.02
765.354 5043.114 107.558 177 - 765.354 -56.886 107.558 VUU
765.354 5043.114 107.482 179 177 -0.000 0.000 -0.076 VUU
705.683 5059.923 102.527 9427 - 705.683 -40.077 102.527 PGR
706.183 5059.925 102.526 SE1 9427 0.500 0.002 -0.001 VUU
712.183 5059.949 102.514 SE2 SE1 6.000 0.025 -0.012 VUU
718.182 5059.974 102.502 SE3 SE2 6.000 0.025 -0.012 VUU
724.183 5059.999 102.490 SE4 SE3 6.000 0.025 -0.012 VUU
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 88
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

730.183 5060.023 102.478 SE5 SE4 6.000 0.025 -0.012 VUU

732.181 5060.032 102.474 F117 - 732.181 -39.968 102.474 BGL 1.219

732.204 5054.431 102.463 F119 - 732.204 -45.569 102.463 BGL 1.219

736.204 5054.447 102.455 SE6 - 736.204 -45.553 102.455 VUU

740.204 5054.463 102.447 F125 - 740.204 -45.536 102.447 BGL 1.219

740.181 5060.064 102.436 F127 - 740.181 -39.935 102.436 BGL 1.219

742.182 5060.073 102.432 SE7 - 742.182 -39.927 102.432 VUU

748.182 5060.097 102.420 SE8 SE7 6.000 0.024 -0.012 VUU
752.571 5060.115 102.411 F133 SE8 4.389 0.018 -0.009 VUU
752.876 5060.116 102.436 F135 F133 0.305 0.001 0.025 RKR
alpha= 10.00
753.181 5060.118 102.461 F137 F135 0.305 0.001 0.025 PGR
754.182 5060.122 102.459 SE9 F137 1.001 0.004 -0.002 VUU
760.182 5060.146 102.447 SE10 SE9 6.000 0.025 -0.012 VUU
764.359 5060.164 102.438 F145 - 764.359 -39.836 102.438 BGL 1.372

764.358 5060.164 99.284 F155 - 764.358 -39.836 99.284 VUU

764.356 5060.164 98.519 F157 F155 -0.002 -0.000 -0.765 VUU
764.356 5060.164 98.363 9999 F157 -0.000 0.000 -0.156 VUU
764.354 5060.164 97.792 A024 - 764.354 -39.836 97.792 BGL 1.372
ne= 1.00
764.353 5060.565 97.390 SE11 A024 -0.002 0.402 -0.402 PGR
764.351 5060.967 96.988 A023 SE11 -0.002 0.402 -0.402 BGL 1.372

764.350 5062.036 96.988 BC99 - 764.350 -37.964 96.988 PGR

763.623 5042.659 108.133 121 - 763.623 -57.341 108.133 VUU
763.623 5042.659 108.057 123 121 0.000 -0.000 -0.076 VUU
764.855 5037.304 97.537 EQ01 - 764.855 -62.696 97.537
764.845 5039.904 97.537 EQ02 - 764.845 -60.096 97.537
674.901 5058.463 117.288 1697 - 674.901 -41.537 117.288 PGR
675.071 5058.463 117.288 1699 - 675.071 -41.537 117.288 VUU
675.296 5058.463 117.288 1701 1699 0.225 0.000 0.000 VUU
764.206 5044.334 107.043 175 - 764.206 -55.666 107.043 VUU
764.206 5044.334 108.246 173 - 764.206 -55.666 108.246 BGL 0.076

764.209 5043.612 108.247 S50 - 764.209 -56.388 108.247 VUU

764.211 5043.110 108.248 169 - 764.211 -56.890 108.248 BGL 0.076

764.475 5043.111 108.249 167 - 764.475 -56.889 108.249 VUU

764.662 5043.112 108.249 165 167 0.187 0.001 0.000 VUU
764.861 5043.112 108.130 183 - 764.861 -56.887 108.130 VUU
764.862 5043.112 108.054 185 183 0.000 0.000 -0.076 VUU
763.616 5044.332 107.042 59 - 763.616 -55.669 107.042 VUU
763.616 5044.332 108.249 61 - 763.616 -55.669 108.249 BGL 0.076
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 89
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

763.619 5043.610 108.250 S56 - 763.619 -56.390 108.250 VUU

763.621 5043.046 108.251 65 - 763.621 -56.954 108.251 VUU
763.622 5042.859 108.252 67 65 0.001 -0.187 0.000 VUU
690.521 5072.681 96.713 925 - 690.521 -27.319 96.713 VUU
690.589 5072.681 96.713 A017 925 0.068 0.000 0.000 PGR
690.591 5072.681 96.713 8953 A017 0.002 0.000 0.000 PGR
690.677 5072.681 96.713 907 8953 0.086 0.000 0.000 TFS
690.677 5072.767 96.713 909 - 690.677 -27.233 96.713 VUU
690.677 5072.847 96.713 911 909 -0.000 0.080 0.000 TWA
690.676 5072.914 96.713 913 911 -0.000 0.066 0.000 TWA
690.676 5072.947 96.713 915 913 -0.000 0.034 0.000 PGR
690.676 5072.992 96.720 917 915 -0.000 0.045 0.007 RKR
alpha= 16.00
690.676 5073.036 96.728 919 917 -0.000 0.045 0.007 VUU
690.674 5073.606 96.728 N14 - 690.674 -26.394 96.728 VUU
690.678 5072.595 96.713 905 - 690.678 -27.405 96.713 PGR
690.678 5072.548 96.713 9529 - 690.678 -27.452 96.713 BGL 0.114

690.678 5072.515 96.747 S217 9529 0.000 -0.033 0.033 PGR

690.678 5072.481 96.780 9528 S217 0.000 -0.033 0.033 BGL 0.114

690.678 5072.481 97.069 895 - 690.678 -27.519 97.069 VUU

690.678 5072.481 97.292 893 895 0.000 0.000 0.223 VUU
690.678 5072.481 98.276 889 - 690.678 -27.519 98.276 VUU
690.678 5072.481 98.362 855 889 0.000 0.000 0.086 TEX

690.677 5072.847 96.847 927 - 690.677 -27.153 96.847 KUH

690.677 5072.847 96.907 929 927 0.000 0.000 0.060 KUH

690.764 5072.481 98.362 857 - 690.764 -27.518 98.362 VUU

692.978 5072.491 98.362 859 - 692.978 -27.509 98.362 BGL 0.114

692.978 5072.491 97.292 861 - 692.978 -27.509 97.292 VUU

692.978 5072.491 97.069 863 861 0.000 0.000 -0.223 VUU
692.978 5072.491 96.780 9535 - 692.978 -27.509 96.780 BGL 0.114

692.978 5072.524 96.747 S216 9535 -0.000 0.033 -0.033 PGR

692.978 5072.558 96.713 9536 S216 -0.000 0.033 -0.033 BGL 0.114

692.978 5072.604 96.713 871 - 692.978 -27.395 96.713 PGR

692.977 5072.690 96.713 873 871 -0.000 0.086 0.000 TFS
692.977 5072.776 96.713 875 873 -0.000 0.086 0.000 VUU
692.977 5072.856 96.713 877 875 -0.000 0.080 0.000 TWA
692.976 5072.923 96.713 879 877 -0.000 0.066 0.000 TWA
692.976 5072.957 96.713 881 879 -0.000 0.034 0.000 PGR
692.976 5073.001 96.720 883 881 -0.000 0.045 0.007 RKR
alpha= 16.00
692.976 5073.045 96.727 885 883 -0.000 0.045 0.007 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 90
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

692.974 5073.616 96.727 N13 - 692.974 -26.384 96.727 VUU

692.977 5072.856 96.847 949 - 692.977 -27.143 96.847 KUH

692.977 5072.856 96.907 951 949 0.000 0.000 0.060 KUH

690.592 5072.481 98.362 853 - 690.592 -27.519 98.362 VUU

688.992 5072.474 98.362 851 - 688.992 -27.526 98.362 BGL 0.114

688.994 5071.918 98.362 S215 - 688.994 -28.082 98.362 PGR

689.004 5069.418 98.362 S161 S215 0.010 -2.500 0.000 PGR
689.005 5069.196 98.362 849 - 689.005 -30.804 98.362 BGL 0.114

689.005 5069.196 100.590 S214 - 689.005 -30.804 100.590 PGR

689.005 5069.196 103.090 S213 S214 0.000 0.000 2.500 PGR
689.005 5069.196 104.762 847 - 689.005 -30.804 104.762 BGL 0.114

689.905 5069.200 104.762 845 - 689.905 -30.800 104.762 BGL 0.114

689.905 5069.200 107.462 843 - 689.905 -30.800 107.462 BGL 0.114

689.906 5068.980 107.462 S212 - 689.906 -31.019 107.462 PGR

689.917 5066.393 107.462 S211 S212 0.011 -2.588 0.000 PGR
689.923 5064.901 107.462 841 - 689.923 -35.099 107.462 BGL 0.114

689.923 5064.901 108.576 839 - 689.923 -35.099 108.576 BGL 0.114

689.925 5064.401 108.576 837 - 689.925 -35.599 108.576 BGL 0.114

690.775 5064.404 108.576 835 - 690.775 -35.596 108.576 BGL 0.114

690.775 5064.404 110.385 833 - 690.775 -35.596 110.385 BGL 0.114

691.125 5064.406 110.385 S210 - 691.125 -35.594 110.385 PGR

694.125 5064.418 110.385 S209 S210 3.000 0.012 0.000 PGR
697.125 5064.431 110.385 S208 S209 3.000 0.012 0.000 PGR
700.125 5064.443 110.385 S207 S208 3.000 0.012 0.000 PGR
703.125 5064.455 110.385 S206 S207 3.000 0.012 0.000 PGR
706.125 5064.468 110.385 S205 S206 3.000 0.012 0.000 PGR
709.125 5064.480 110.385 S204 S205 3.000 0.012 0.000 PGR
712.125 5064.492 110.385 S203 S204 3.000 0.012 0.000 PGR
715.125 5064.504 110.385 S202 S203 3.000 0.012 0.000 PGR
718.125 5064.517 110.385 S201 S202 3.000 0.012 0.000 PGR
721.125 5064.529 110.385 S200 S201 3.000 0.012 0.000 PGR
724.125 5064.542 110.385 S199 S200 3.000 0.012 0.000 PGR
727.125 5064.554 110.385 S198 S199 3.000 0.012 0.000 PGR
730.125 5064.566 110.385 S197 S198 3.000 0.012 0.000 PGR
733.125 5064.578 110.385 S196 S197 3.000 0.012 0.000 PGR
736.125 5064.591 110.385 S195 S196 3.000 0.012 0.000 PGR
739.125 5064.603 110.385 S194 S195 3.000 0.012 0.000 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 91
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

742.125 5064.615 110.385 S193 S194 3.000 0.012 0.000 PGR

745.125 5064.627 110.385 S192 S193 3.000 0.012 0.000 PGR
748.125 5064.640 110.385 S191 S192 3.000 0.012 0.000 PGR
751.125 5064.652 110.385 S190 S191 3.000 0.012 0.000 PGR
754.125 5064.665 110.385 S189 S190 3.000 0.012 0.000 PGR
757.122 5064.677 110.385 S188 S189 2.997 0.012 0.000 PGR
760.112 5064.689 110.385 S187 S188 2.990 0.012 0.000 PGR
763.111 5064.701 110.385 S186 S187 2.999 0.012 0.000 PGR
766.113 5064.713 110.385 S185 S186 3.002 0.012 0.000 PGR
766.951 5064.717 110.385 831 - 766.951 -35.283 110.385 BGL 0.114

766.951 5064.717 105.614 829 - 766.951 -35.283 105.614 BGL 0.114

770.065 5064.729 105.614 827 - 770.065 -35.271 105.614 BGL 0.114

770.065 5064.729 103.774 825 - 770.065 -35.271 103.774 BGL 0.114

770.059 5065.219 103.774 S184 - 770.059 -34.781 103.774 VUU

770.049 5068.621 103.774 S183 S184 -0.010 3.402 -0.000 PGR
770.038 5071.440 103.774 819 - 770.038 -28.560 103.774 BGL 0.114

770.039 5071.440 102.067 817 - 770.039 -28.560 102.067 VUU

770.039 5071.440 101.855 981 817 0.000 0.000 -0.212 VUU
770.039 5071.440 101.488 979 - 770.039 -28.560 101.488 PGR
770.039 5071.440 101.402 977 979 0.000 0.000 -0.086 TEX

770.039 5071.440 101.316 975 977 0.000 0.000 -0.086 PGR

770.039 5071.440 101.314 A014 975 0.000 0.000 -0.002 PGR
770.039 5071.440 101.246 969 A014 0.000 0.000 -0.068 VUU
770.039 5071.440 101.022 967 969 0.000 0.000 -0.223 PGR
770.039 5071.440 100.840 S182 - 770.039 -28.560 100.840 PGR
770.039 5071.440 100.152 BC05 S182 0.000 0.000 -0.688 PGR
693.063 5072.691 96.713 8951 - 693.063 -27.309 96.713 PGR
693.065 5072.691 96.713 A016 8951 0.002 0.000 0.000 PGR
693.133 5072.691 96.713 947 A016 0.068 0.000 0.000 VUU
690.676 5072.914 96.580 933 - 690.676 -27.087 96.580 VUU
770.038 5071.364 101.402 987 - 770.038 -28.636 101.402 VUU
770.038 5071.362 101.402 A015 987 0.000 -0.002 0.000 PGR
770.039 5071.300 101.402 989 A015 0.000 -0.062 0.000 VUU
770.039 5071.113 101.402 991 989 0.001 -0.187 0.000 VUU
692.976 5072.923 96.580 955 - 692.976 -27.077 96.580 VUU
690.673 5073.736 96.978 N16 - 690.673 -26.264 96.978 VUU
690.673 5073.736 97.046 A020 N16 0.000 0.000 0.068 PGR
690.673 5073.736 97.048 775 A020 0.000 0.000 0.002 VUU
690.673 5073.736 97.092 773 775 0.000 0.000 0.045 RKR
alpha= 16.00
690.673 5073.736 97.137 771 773 0.000 0.000 0.045 PGR
690.673 5073.736 97.237 769 771 0.000 0.000 0.100 TWA
690.673 5073.736 97.407 767 - 690.673 -26.264 97.407 VUU
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 92
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

690.673 5073.736 97.657 765 767 0.000 0.000 0.250 VUU

690.673 5073.736 97.806 763 - 690.673 -26.264 97.806 TWA
690.673 5073.736 97.955 757 - 690.673 -26.264 97.955 VUU
690.673 5073.736 98.178 755 757 0.000 0.000 0.223 VUU
690.673 5073.736 98.248 753 - 690.673 -26.264 98.248 VUU
690.673 5073.736 98.362 751 753 0.000 0.000 0.114 BGL 0.114
ne= 1.00
690.677 5072.767 98.362 749 - 690.677 -27.233 98.362 VUU
690.677 5072.681 98.362 679 749 0.000 -0.086 0.000 TFS
690.540 5073.736 97.237 785 - 690.540 -26.264 97.237 KUH

690.479 5073.735 97.237 787 785 -0.060 -0.000 0.000 KUH

690.674 5073.603 97.806 779 - 690.674 -26.397 97.806 KUH

690.674 5073.526 97.806 781 779 0.000 -0.076 0.000 KUH

690.591 5072.681 98.362 677 - 690.591 -27.319 98.362 VUU

690.391 5072.680 98.362 S179 677 -0.200 -0.001 0.000 PGR
688.791 5072.673 98.362 675 - 688.791 -27.327 98.362 BGL 0.114

688.794 5071.917 98.362 S178 - 688.794 -28.083 98.362 PGR

688.804 5069.417 98.362 S129 S178 0.010 -2.500 0.000 PGR
688.805 5069.196 98.362 673 - 688.805 -30.804 98.362 BGL 0.114

688.805 5069.196 100.590 S177 - 688.805 -30.804 100.590 PGR

688.805 5069.196 103.090 S176 S177 0.000 0.000 2.500 PGR
688.805 5069.196 104.962 671 - 688.805 -30.804 104.962 BGL 0.114

689.505 5069.199 104.962 669 - 689.505 -30.801 104.962 BGL 0.114

689.505 5069.199 107.462 667 - 689.505 -30.801 107.462 BGL 0.114

689.506 5068.979 107.462 S175 - 689.506 -31.021 107.462 PGR

689.517 5066.393 107.462 S174 S175 0.011 -2.586 0.000 PGR
689.523 5064.900 107.462 665 - 689.523 -35.100 107.462 BGL 0.114

689.523 5064.900 108.576 663 - 689.523 -35.100 108.576 BGL 0.114

689.526 5064.200 108.576 661 - 689.526 -35.800 108.576 BGL 0.114

690.776 5064.205 108.576 659 - 690.776 -35.795 108.576 BGL 0.114

690.776 5064.205 110.385 657 - 690.776 -35.795 110.385 BGL 0.114

691.125 5064.207 110.385 S173 - 691.125 -35.793 110.385 PGR

694.125 5064.219 110.385 S172 S173 3.000 0.012 0.000 PGR
697.125 5064.231 110.385 S171 S172 3.000 0.012 0.000 PGR
700.125 5064.244 110.385 S170 S171 3.000 0.012 0.000 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 93
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

703.125 5064.256 110.385 S169 S170 3.000 0.012 0.000 PGR

706.125 5064.268 110.385 S166 S169 3.000 0.012 0.000 PGR
709.125 5064.280 110.385 S163 S166 3.000 0.012 0.000 PGR
712.125 5064.292 110.385 S162 S163 3.000 0.012 0.000 PGR
715.125 5064.305 110.385 S160 S162 3.000 0.012 0.000 PGR
718.125 5064.317 110.385 S159 S160 3.000 0.012 0.000 PGR
721.125 5064.330 110.385 S158 S159 3.000 0.012 0.000 PGR
724.125 5064.342 110.385 S157 S158 3.000 0.012 0.000 PGR
727.125 5064.354 110.385 S156 S157 3.000 0.012 0.000 PGR
730.125 5064.366 110.385 S155 S156 3.000 0.012 0.000 PGR
733.125 5064.379 110.385 S154 S155 3.000 0.012 0.000 PGR
736.125 5064.391 110.385 S153 S154 3.000 0.012 0.000 PGR
739.125 5064.403 110.385 S152 S153 3.000 0.012 0.000 PGR
742.125 5064.416 110.385 S151 S152 3.000 0.012 0.000 PGR
745.125 5064.428 110.385 S150 S151 3.000 0.012 0.000 PGR
748.125 5064.440 110.385 S149 S150 3.000 0.012 0.000 PGR
751.125 5064.453 110.385 S148 S149 3.000 0.012 0.000 PGR
754.125 5064.465 110.385 S147 S148 3.000 0.012 0.000 PGR
757.122 5064.477 110.385 S146 S147 2.997 0.012 0.000 PGR
760.112 5064.489 110.385 S145 S146 2.990 0.012 0.000 PGR
760.479 5064.491 110.385 655 - 760.479 -35.509 110.385 BGL 0.114

760.479 5064.491 107.697 653 - 760.479 -35.509 107.697 BGL 0.114

760.486 5062.834 107.697 S103 - 760.486 -37.166 107.697 PGR

760.490 5061.989 107.697 651 - 760.490 -38.011 107.697 BGL 0.114

760.490 5061.989 106.046 649 - 760.490 -38.011 106.046 TWA

760.490 5061.989 105.996 647 649 0.000 0.000 -0.050 PGR
760.490 5061.989 105.945 645 647 0.000 0.000 -0.051 RKR
alpha= 13.00
760.490 5061.989 105.894 643 645 0.000 0.000 -0.051 VUU
760.490 5061.989 105.294 639 643 0.000 0.000 -0.600 VUU
760.490 5061.989 105.243 637 639 0.000 0.000 -0.051 RKR
alpha= 13.00
760.490 5061.989 105.192 9552 637 0.000 0.000 -0.051 PGR
760.490 5061.990 105.145 9557 - 760.490 -38.010 105.145 BGL 0.114

760.523 5061.991 105.112 S168 9557 0.033 0.001 -0.033 PGR

760.556 5061.991 105.078 9556 S168 0.033 0.001 -0.033 BGL 0.114

761.203 5061.992 105.078 9353 - 761.203 -38.008 105.078 PGR

762.147 5061.996 105.078 9355 9353 0.944 0.004 0.000 PGR
762.381 5061.997 105.078 S167 - 762.381 -38.003 105.078 PGR
762.615 5061.998 105.078 627 - 762.615 -38.002 105.078 BGL 0.114

762.617 5061.534 105.078 625 - 762.617 -38.466 105.078 BGL 0.114

763.517 5061.538 105.078 623 - 763.517 -38.462 105.078 BGL 0.114

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 94
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

763.515 5062.002 105.078 621 - 763.515 -37.998 105.078 BGL 0.114

763.704 5062.002 105.078 S165 - 763.704 -37.997 105.078 TWA

763.849 5062.003 105.078 617 - 763.849 -37.997 105.078 VUU
764.061 5062.004 105.078 615 617 0.212 0.001 0.000 VUU
764.231 5062.005 105.078 613 - 764.231 -37.995 105.078 TWA
764.331 5062.005 105.078 611 613 0.100 0.000 0.000 PGR
764.375 5062.005 105.071 609 611 0.045 0.000 -0.007 RKR
alpha= 16.00
764.420 5062.005 105.064 607 609 0.045 0.000 -0.007 VUU
764.422 5062.005 105.064 A022 607 0.002 0.000 0.000 PGR
764.484 5062.006 105.064 605 A022 0.062 0.000 0.000 VUU
764.747 5062.007 105.064 603 605 0.263 0.001 0.000 VUU
764.809 5062.007 105.064 A025 603 0.062 0.000 0.000 PGR
764.811 5062.007 105.064 601 A025 0.002 0.000 0.000 VUU
764.855 5062.007 105.071 599 601 0.045 0.000 0.007 RKR
alpha= 16.00
764.900 5062.007 105.078 597 599 0.045 0.000 0.007 PGR
765.000 5062.008 105.078 595 597 0.100 0.000 0.000 TWA
760.488 5062.123 106.046 743 - 760.488 -37.877 106.046 VUU
760.488 5062.183 106.046 745 743 -0.000 0.060 0.000 VUU
690.763 5072.682 98.362 681 - 690.763 -27.318 98.362 VUU
692.727 5072.689 98.362 S180 681 1.964 0.008 0.000 PGR
692.977 5072.690 98.362 683 - 692.977 -27.309 98.362 BGL 0.114

692.973 5073.746 98.362 685 - 692.973 -26.254 98.362 BGL 0.114

ne= 1.00
692.973 5073.746 98.248 687 685 0.000 0.000 -0.114 VUU
692.973 5073.746 98.178 689 - 692.973 -26.254 98.178 VUU
692.973 5073.746 97.955 691 689 0.000 0.000 -0.223 VUU
692.973 5073.746 97.806 697 - 692.973 -26.254 97.806 TWA
692.973 5073.746 97.657 699 - 692.973 -26.254 97.657 VUU
692.973 5073.746 97.406 701 699 0.000 0.000 -0.250 VUU
692.973 5073.746 97.236 703 - 692.973 -26.254 97.236 TWA
692.973 5073.746 97.136 705 703 0.000 0.000 -0.100 PGR
692.973 5073.746 97.092 707 705 0.000 0.000 -0.045 RKR
alpha= 16.00
692.973 5073.746 97.048 709 707 0.000 0.000 -0.045 VUU
692.973 5073.746 97.045 A018 709 0.000 0.000 -0.002 PGR
692.973 5073.746 96.977 N15 A018 0.000 0.000 -0.068 VUU
692.973 5073.612 97.806 791 - 692.973 -26.388 97.806 KUH

692.974 5073.536 97.806 793 791 0.000 -0.076 0.000 KUH

763.703 5062.002 105.212 723 - 763.703 -37.997 105.212 KUH

763.703 5062.002 105.512 721 - 763.703 -37.997 105.512 BGL 0.038

764.644 5062.006 105.512 719 - 764.644 -37.993 105.512 KUH

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 95
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

764.753 5062.007 105.512 717 719 0.109 0.000 0.000 KUH

765.526 5062.010 105.512 715 - 765.526 -37.990 105.512 BGL 0.038

765.526 5062.010 105.212 713 - 765.526 -37.990 105.212 KUH

765.526 5062.010 105.078 S164 713 0.000 0.000 -0.133 TWA

765.715 5062.011 105.078 587 - 765.715 -37.989 105.078 BGL 0.114

765.718 5061.469 105.078 585 - 765.718 -38.531 105.078 VUU

765.719 5061.219 105.078 583 585 0.001 -0.250 0.000 VUU
765.719 5061.149 105.078 581 - 765.719 -38.851 105.078 VUU
765.719 5061.035 105.078 579 581 0.000 -0.114 0.000 BGL 0.114
ne= 1.00
765.719 5061.035 104.548 577 - 765.719 -38.965 104.548 PGR
765.719 5061.035 104.424 451 577 0.000 0.000 -0.124 TFS
765.576 5061.034 104.424 453 - 765.576 -38.966 104.424 PGR
763.139 5061.024 104.424 S138 453 -2.437 -0.010 0.000 VUU
762.476 5061.021 104.424 457 - 762.476 -38.978 104.424 BGL 0.229

762.476 5061.021 104.195 459 - 762.476 -38.978 104.195 VUU

762.476 5061.021 103.966 461 459 0.000 0.000 -0.229 BGL 0.229

762.487 5058.213 103.966 463 - 762.487 -41.787 103.966 BGL 0.229

760.742 5058.206 103.966 465 - 760.742 -41.794 103.966 BGL 0.229

760.745 5057.589 103.966 S139 - 760.745 -42.411 103.966 VUU

760.748 5056.957 103.966 469 - 760.748 -43.043 103.966 BGL 0.229

760.748 5056.957 103.174 471 - 760.748 -43.043 103.174 BGL 0.229

759.875 5056.954 103.174 473 - 759.875 -43.046 103.174 BGL 0.229

759.885 5054.586 103.174 S140 - 759.885 -45.414 103.174 VUU

759.896 5051.897 103.174 477 - 759.896 -48.103 103.174 BGL 0.229

759.896 5051.897 102.174 479 - 759.896 -48.103 102.174 BGL 0.229

757.652 5051.888 102.174 S141 - 757.652 -48.112 102.174 VUU

756.523 5051.883 102.174 483 - 756.523 -48.117 102.174 BGL 0.229

756.523 5051.883 100.075 485 - 756.523 -48.117 100.075 BGL 0.229

756.530 5050.170 100.075 S142 - 756.530 -49.829 100.075 PGR

756.532 5049.841 100.075 487 - 756.532 -50.159 100.075 BGL 0.229

756.532 5049.841 98.253 489 - 756.532 -50.159 98.253 BGL 0.229

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 96
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

753.235 5049.827 98.253 491 - 753.235 -50.173 98.253 BGL 0.229

753.235 5049.827 96.948 493 - 753.235 -50.173 96.948 VUU

753.235 5049.827 96.672 499 493 0.000 0.000 -0.276 VUU
753.235 5049.827 96.585 A048 499 0.000 0.000 -0.087 PGR
753.235 5049.827 96.583 501 A048 0.000 0.000 -0.002 VUU
753.235 5049.827 96.440 503 501 0.000 0.000 -0.143 TFS
753.234 5049.970 96.440 803 - 753.234 -50.030 96.440 PGR
753.234 5049.972 96.440 A067 803 -0.000 0.002 0.000 PGR
753.234 5050.069 96.440 7881 A067 -0.000 0.097 0.000 VUU
753.232 5050.481 96.440 7879 7881 -0.002 0.412 0.000 VUU
753.232 5050.578 96.440 A068 7879 -0.000 0.097 0.000 PGR
753.232 5050.581 96.440 7877 A068 -0.000 0.002 0.000 VUU
753.232 5050.656 96.453 7875 7877 -0.000 0.076 0.013 RKR
alpha= 18.00
753.231 5050.732 96.466 7873 7875 -0.000 0.076 0.013 VUU
753.230 5051.029 96.466 SE93 7873 -0.001 0.296 0.000 VUU
753.230 5051.155 96.466 SE91 SE93 -0.001 0.126 0.000 BGL 0.305

753.229 5051.244 96.555 S181 SE91 -0.000 0.089 0.089 PGR

753.229 5051.333 96.645 SE90 S181 -0.000 0.089 0.089 BGL 0.305

753.229 5051.333 98.830 7867 - 753.229 -48.666 98.830 BGL 0.305

753.231 5050.776 98.830 7865 - 753.231 -49.223 98.830 PGR

753.238 5049.058 98.830 7863 - 753.238 -50.942 98.830 BGL 0.305

754.188 5049.062 98.830 SE65 - 754.188 -50.939 98.830 VUU

758.739 5049.080 98.830 7819 SE65 4.550 0.019 0.000 TWA
760.689 5049.088 98.830 7885 - 760.689 -50.912 98.830 BGL 0.305

760.691 5048.588 98.830 SE66 - 760.691 -51.412 98.830 VUU

760.697 5047.133 98.830 7889 - 760.697 -52.867 98.830 BGL 0.305

762.096 5047.138 98.830 7891 - 762.096 -52.862 98.830 BGL 0.305

ne= 1.00
762.095 5047.443 98.830 7893 7891 -0.001 0.305 0.000 VUU
762.095 5047.545 98.830 N4 - 762.095 -52.455 98.830 VUU
762.092 5048.325 98.830 9435 - 762.092 -51.675 98.830 PGR
762.092 5048.325 99.540 9439 9435 0.000 0.000 0.710 PGR
762.085 5049.925 99.540 9441 9439 -0.007 1.600 0.000 PGR
762.070 5053.625 99.540 9443 9441 -0.015 3.700 0.000 PGR
762.063 5055.225 99.540 9445 9443 -0.007 1.600 0.000 PGR
758.739 5049.080 98.675 7817 - 758.739 -50.920 98.675 PGR
758.739 5049.080 98.390 7815 - 758.739 -50.920 98.390 BGL 0.114

758.728 5051.580 98.390 7813 - 758.728 -48.420 98.390 BGL 0.114

759.228 5051.582 98.390 7811 - 759.228 -48.418 98.390 BGL 0.114

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 97
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

759.228 5051.582 97.526 7809 - 759.228 -48.418 97.526 PGR

759.228 5051.582 97.440 7807 7809 0.000 0.000 -0.086 TFS
759.228 5051.582 97.354 7805 7807 0.000 0.000 -0.086 PGR
759.228 5051.582 96.925 7803 - 759.228 -48.418 96.925 VUU
759.228 5051.582 96.634 7801 7803 0.000 0.000 -0.292 VUU
759.228 5051.582 96.554 7799 - 759.228 -48.418 96.554 VUU
759.228 5051.582 96.507 7797 7799 0.000 0.000 -0.047 BGL 0.114
ne= 1.00
759.228 5051.615 96.473 SE67 7797 -0.000 0.033 -0.033 VUU
759.228 5051.649 96.440 7793 SE67 -0.000 0.033 -0.033 BGL 0.114

759.228 5051.696 96.440 7791 - 759.228 -48.304 96.440 PGR

759.228 5051.740 96.433 7789 7791 -0.000 0.045 -0.007 RKR
alpha= 16.00
759.228 5051.785 96.425 7787 7789 -0.000 0.045 -0.007 VUU
759.228 5051.787 96.425 A071 7787 -0.000 0.002 0.000 PGR
759.227 5051.855 96.425 7785 A071 -0.000 0.068 0.000 VUU
759.226 5052.131 96.425 7783 7785 -0.001 0.276 0.000 VUU
759.226 5052.199 96.425 A072 7783 -0.000 0.068 0.000 PGR
759.226 5052.201 96.425 7781 A072 -0.000 0.002 0.000 VUU
759.226 5052.245 96.433 7779 7781 -0.000 0.045 0.007 RKR
alpha= 16.00
759.226 5052.290 96.440 7777 7779 -0.000 0.045 0.007 PGR
759.224 5052.642 96.440 7821 - 759.224 -47.358 96.440 BGL 0.114

759.224 5052.675 96.473 SE68 7821 -0.000 0.033 0.033 VUU

759.224 5052.708 96.507 7825 SE68 -0.000 0.033 0.033 BGL 0.114
ne= 1.00
759.224 5052.708 96.554 7827 7825 0.000 0.000 0.047 VUU
759.224 5052.708 96.634 7829 - 759.224 -47.291 96.634 VUU
759.224 5052.708 96.921 7831 7829 0.000 0.000 0.287 VUU
759.224 5052.708 97.354 7833 - 759.224 -47.291 97.354 PGR
759.224 5052.708 97.440 7835 7833 0.000 0.000 0.086 TFS
759.224 5052.708 97.526 7837 7835 0.000 0.000 0.086 PGR
759.224 5052.708 101.890 SE69 7837 0.000 0.000 4.364 VUU
759.224 5052.708 102.235 7841 - 759.224 -47.291 102.235 BGL 0.114

759.216 5054.582 102.235 SE70 - 759.216 -45.418 102.235 VUU

759.214 5054.982 102.235 7845 - 759.214 -45.018 102.235 BGL 0.114

759.214 5054.982 102.886 7847 - 759.214 -45.018 102.886 BGL 0.114

756.664 5054.972 102.886 7849 - 756.664 -45.029 102.886 BGL 0.114

756.664 5054.972 103.150 BC15 - 756.664 -45.029 103.150 VUU

764.230 5062.005 104.945 733 - 764.230 -37.995 104.945 KUH

764.230 5062.005 104.845 735 733 0.000 0.000 -0.100 KUH

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 98
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

764.230 5062.005 104.769 737 735 0.000 0.000 -0.076 KUH

765.381 5062.010 105.078 591 - 765.381 -37.990 105.078 VUU

765.169 5062.009 105.078 593 591 -0.212 -0.001 0.000 VUU
765.862 5061.036 104.424 449 - 765.862 -38.964 104.424 PGR
766.139 5061.037 104.424 S137 449 0.277 0.001 0.000 VUU
770.159 5061.053 104.424 445 - 770.159 -38.947 104.424 BGL 0.229

770.159 5061.053 103.814 443 - 770.159 -38.947 103.814 BGL 0.229

770.155 5061.761 103.814 S136 - 770.155 -38.239 103.814 PGR

770.148 5063.832 103.814 441 - 770.148 -36.169 103.814 BGL 0.229

769.068 5063.827 103.814 439 - 769.068 -36.173 103.814 BGL 0.229

769.062 5065.219 103.814 S135 - 769.062 -34.781 103.814 PGR

769.062 5065.299 103.814 437 S135 -0.000 0.080 0.000 PGR
769.061 5065.442 103.814 435 437 -0.001 0.143 0.000 TFS
769.061 5065.585 103.814 433 435 -0.001 0.143 0.000 VUU
769.060 5065.729 103.814 385 433 -0.001 0.143 0.000 TFS
769.060 5065.872 103.814 405 385 -0.001 0.143 0.000 PGR
769.058 5066.221 103.814 9518 405 -0.001 0.350 0.000 PGR
769.057 5066.538 103.814 407 9518 -0.001 0.317 0.000 PGR
769.057 5066.607 103.801 409 407 -0.000 0.070 -0.014 RKR
alpha= 19.00
769.056 5066.678 103.787 411 409 -0.000 0.070 -0.014 VUU
769.056 5066.680 103.787 A029 411 -0.000 0.002 0.000 PGR
769.056 5066.754 103.787 9295 A029 -0.000 0.075 0.000 PGR
769.051 5067.911 103.787 9293 9295 -0.005 1.156 0.000 PGR
769.048 5068.617 103.787 S133 - 769.048 -31.383 103.787 VUU
769.044 5069.608 103.787 421 - 769.044 -30.392 103.787 BGL 0.152

769.744 5069.611 103.787 423 - 769.744 -30.389 103.787 BGL 0.152

769.737 5071.435 103.787 425 - 769.737 -28.565 103.787 BGL 0.152

769.729 5071.435 102.179 9291 - 769.729 -28.565 102.179 PGR

769.729 5071.435 101.946 1127 9291 0.000 0.000 -0.233 VUU
769.729 5071.435 101.645 1125 1127 0.000 0.000 -0.301 VUU
769.729 5071.435 101.570 A028 1125 0.000 0.000 -0.075 PGR
769.729 5071.435 101.568 1123 A028 0.000 0.000 -0.002 PGR
769.729 5071.435 101.463 1121 1123 0.000 0.000 -0.105 TEX

769.729 5071.435 101.358 1119 1121 0.000 0.000 -0.105 PGR

769.729 5071.435 101.356 A027 1119 0.000 0.000 -0.002 PGR
769.729 5071.435 101.281 1113 A027 0.000 0.000 -0.075 VUU
769.729 5071.435 101.029 1111 1113 0.000 0.000 -0.252 VUU
769.729 5071.435 100.840 S134 - 769.729 -28.565 100.840 PGR
769.729 5071.435 100.152 BC06 S134 0.000 0.000 -0.688 VUU
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 99
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

753.236 5049.684 96.440 805 - 753.236 -50.316 96.440 PGR

753.236 5049.541 96.440 3957 805 0.001 -0.143 0.000 TTU
753.237 5049.405 96.440 3955 3957 0.001 -0.136 0.000 VUU
753.237 5049.262 96.440 SE41 3955 0.001 -0.143 0.000 TFS
753.238 5049.119 96.440 3951 SE41 0.001 -0.143 0.000 PGR
753.238 5049.117 96.440 A065 3951 0.000 -0.002 0.000 PGR
753.238 5049.030 96.440 3949 A065 0.000 -0.087 0.000 VUU
753.239 5048.754 96.440 3947 3949 0.001 -0.276 0.000 VUU
753.240 5048.667 96.440 A064 3947 0.000 -0.087 0.000 PGR
753.240 5048.665 96.440 3945 A064 0.000 -0.002 0.000 PGR
753.240 5048.595 96.427 3943 3945 0.000 -0.070 -0.014 RKR
alpha= 19.00
753.240 5048.525 96.413 3941 3943 0.000 -0.070 -0.014 VUU
753.240 5048.523 96.413 A063 3941 0.000 -0.002 0.000 PGR
753.241 5048.439 96.413 3939 A063 0.000 -0.084 0.000 VUU
753.242 5048.062 96.413 3937 3939 0.002 -0.377 0.000 VUU
753.242 5047.978 96.413 A062 3937 0.000 -0.084 0.000 PGR
753.242 5047.976 96.413 3935 A062 0.000 -0.002 0.000 VUU
753.243 5047.906 96.427 3933 3935 0.000 -0.070 0.014 RKR
alpha= 19.00
753.243 5047.836 96.440 3931 3933 0.000 -0.070 0.014 PGR
753.244 5047.492 96.440 3927 - 753.244 -52.508 96.440 BGL 0.229

753.245 5047.425 96.507 SE40 3927 0.000 -0.067 0.067 VUU

753.245 5047.358 96.575 3923 - 753.245 -52.642 96.575 BGL 0.229
ne= 1.00
753.245 5047.358 96.669 3921 3923 0.000 0.000 0.095 VUU
753.245 5047.358 96.758 3919 - 753.245 -52.642 96.758 VUU
753.245 5047.358 97.034 3917 3919 0.000 0.000 0.276 VUU
753.245 5047.357 97.397 3915 - 753.245 -52.643 97.397 PGR
753.245 5047.357 97.540 3913 3915 0.000 0.000 0.143 TFS
753.245 5047.357 97.683 3911 3913 0.000 0.000 0.143 PGR
753.245 5047.358 100.424 3909 - 753.245 -52.642 100.424 BGL 0.229

754.195 5047.362 100.424 SE39 - 754.195 -52.638 100.424 VUU

757.195 5047.374 100.424 SE38 SE39 3.000 0.012 0.000 VUU
757.846 5047.376 100.424 3903 - 757.846 -52.623 100.424 BGL 0.229

757.846 5047.376 103.174 3901 - 757.846 -52.623 103.174 BGL 0.229

757.841 5048.577 103.174 SE37 - 757.841 -51.424 103.174 VUU

757.837 5049.384 103.174 3897 - 757.837 -50.616 103.174 VUU
757.828 5051.576 103.174 SE36 - 757.828 -48.424 103.174 VUU
757.816 5054.594 103.174 SE35 SE36 -0.012 3.017 0.000 VUU
757.804 5057.576 103.174 SE34 SE35 -0.012 2.983 0.000 VUU
757.797 5059.176 103.174 SE33 SE34 -0.007 1.600 0.000 PGR
757.787 5061.656 103.174 3887 - 757.787 -38.344 103.174 BGL 0.229

757.787 5061.656 101.924 3885 - 757.787 -38.344 101.924 BGL 0.229

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 100
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

760.137 5061.666 101.924 SE32 - 760.137 -38.334 101.924 PGR

763.137 5061.678 101.924 SE31 SE32 3.000 0.012 0.000 PGR
766.137 5061.690 101.924 SE30 SE31 3.000 0.012 0.000 VUU
767.437 5061.696 101.924 3881 - 767.437 -38.304 101.924 BGL 0.229

767.437 5061.696 101.112 3445 - 767.437 -38.304 101.112 TWA

767.437 5061.696 99.809 BC02 - 767.437 -38.304 99.809 VUU
753.237 5049.262 96.571 4009 - 753.237 -50.738 96.571 VUU
753.237 5049.262 97.540 4007 - 753.237 -50.738 97.540 BGL 0.152

753.243 5047.866 97.540 4005 - 753.243 -52.134 97.540 VUU

753.244 5047.564 97.540 4003 4005 0.001 -0.301 0.000 VUU
753.245 5047.490 97.540 A066 4003 0.000 -0.075 0.000 PGR
753.245 5047.487 97.540 4001 A066 0.000 -0.002 0.000 VUU
759.228 5051.658 97.440 7859 - 759.228 -48.342 97.440 VUU
759.226 5052.287 97.440 7857 - 759.226 -47.713 97.440 VUU
759.224 5052.562 97.440 7855 7857 -0.001 0.276 0.000 VUU
759.224 5052.631 97.440 9079 7855 -0.000 0.068 0.000 PGR
759.224 5052.633 97.440 7853 9079 -0.000 0.002 0.000 VUU
693.106 5073.746 97.237 797 - 693.106 -26.254 97.237 KUH

693.167 5073.747 97.237 799 797 0.060 0.000 0.000 KUH

764.999 5062.008 104.945 725 - 764.999 -37.992 104.945 KUH

764.999 5062.008 104.845 727 725 0.000 0.000 -0.100 KUH

764.999 5062.008 104.769 729 727 0.000 0.000 -0.076 KUH

768.937 5065.442 103.814 505 - 768.937 -34.558 103.814 PGR

768.423 5065.440 103.814 507 - 768.423 -34.560 103.814 BGL 0.114

768.418 5066.746 103.814 9283 - 768.418 -33.254 103.814 PGR

768.413 5067.890 103.814 9279 9283 -0.005 1.144 0.000 PGR
768.410 5068.593 103.814 S143 - 768.410 -31.407 103.814 VUU
768.410 5068.793 103.814 515 S143 -0.001 0.200 0.000 PGR
768.409 5068.844 103.821 517 515 -0.000 0.051 0.006 RKR
alpha= 13.00
768.409 5068.895 103.827 519 517 -0.000 0.051 0.006 VUU
768.407 5069.495 103.827 523 519 -0.002 0.600 0.000 VUU
768.407 5069.546 103.821 525 523 -0.000 0.051 -0.006 RKR
alpha= 13.00
768.406 5069.597 103.814 527 525 -0.000 0.051 -0.006 PGR
768.404 5070.205 103.814 529 - 768.404 -29.795 103.814 BGL 0.114

769.104 5070.208 103.814 531 - 769.104 -29.792 103.814 BGL 0.114

769.099 5071.433 103.814 533 - 769.099 -28.567 103.814 BGL 0.114

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 101
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

769.099 5071.433 102.027 539 - 769.099 -28.567 102.027 VUU

769.099 5071.433 101.819 541 539 0.000 0.000 -0.208 VUU
769.099 5071.433 101.569 543 541 0.000 0.000 -0.250 VUU
769.099 5071.433 101.501 A013 543 0.000 0.000 -0.068 PGR
769.099 5071.433 101.499 545 A013 0.000 0.000 -0.002 PGR
769.099 5071.433 101.413 547 545 0.000 0.000 -0.086 TFS
769.099 5071.433 101.327 549 547 0.000 0.000 -0.086 PGR
769.099 5071.433 101.325 A012 549 0.000 0.000 -0.002 PGR
769.099 5071.433 101.257 555 A012 0.000 0.000 -0.068 VUU
769.099 5071.433 101.034 557 555 0.000 0.000 -0.223 VUU
769.099 5071.433 100.840 S144 - 769.099 -28.567 100.840 PGR
769.099 5071.433 100.152 BC08 S144 0.000 0.000 -0.688 VUU
768.936 5065.728 103.814 383 - 768.936 -34.272 103.814 PGR
768.722 5065.727 103.814 381 - 768.722 -34.273 103.814 BGL 0.114
ne= 1.00
768.722 5065.841 103.814 379 381 -0.000 0.114 0.000 VUU
768.721 5065.911 103.814 377 - 768.721 -34.089 103.814 VUU
768.721 5066.123 103.814 375 377 -0.001 0.212 0.000 VUU
768.716 5067.139 103.814 9289 - 768.716 -32.861 103.814 PGR
768.712 5068.284 103.814 9285 9289 -0.005 1.144 0.000 PGR
768.711 5068.594 103.814 S132 - 768.711 -31.406 103.814 VUU
768.710 5068.794 103.814 365 S132 -0.001 0.200 0.000 PGR
768.710 5068.845 103.821 363 365 -0.000 0.051 0.006 RKR
alpha= 13.00
768.709 5068.896 103.827 361 363 -0.000 0.051 0.006 VUU
768.707 5069.497 103.827 357 361 -0.002 0.600 0.000 VUU
768.707 5069.547 103.821 355 357 -0.000 0.051 -0.006 RKR
alpha= 13.00
768.707 5069.598 103.814 353 355 -0.000 0.051 -0.006 PGR
768.705 5069.906 103.814 351 - 768.705 -30.094 103.814 BGL 0.114

769.405 5069.909 103.814 349 - 769.405 -30.091 103.814 BGL 0.114

769.399 5071.433 103.814 347 - 769.399 -28.568 103.814 BGL 0.114

769.399 5071.433 102.294 341 - 769.399 -28.568 102.294 VUU

769.399 5071.433 102.086 339 341 0.000 0.000 -0.208 VUU
769.399 5071.433 101.836 337 339 0.000 0.000 -0.250 VUU
769.399 5071.433 101.768 A010 337 0.000 0.000 -0.068 PGR
769.399 5071.433 101.766 335 A010 0.000 0.000 -0.002 PGR
769.399 5071.433 101.680 333 335 0.000 0.000 -0.086 TFS
769.399 5071.433 101.594 331 333 0.000 0.000 -0.086 PGR
769.399 5071.433 101.524 9483 - 769.399 -28.568 101.524 VUU
769.399 5071.433 101.301 323 9483 0.000 0.000 -0.223 VUU
769.399 5071.433 100.840 S131 - 769.399 -28.568 100.840 PGR
769.399 5071.433 100.152 BC07 S131 0.000 0.000 -0.688 VUU
769.729 5071.346 101.463 1133 - 769.729 -28.654 101.463 VUU
769.729 5071.344 101.463 A030 1133 0.000 -0.002 0.000 PGR
769.729 5071.282 101.463 1135 A030 0.000 -0.062 0.000 VUU
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 102
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

769.730 5071.095 101.463 1137 1135 0.001 -0.187 0.000 VUU

753.236 5049.541 96.764 4017 - 753.236 -50.459 96.764 PGR
753.236 5049.541 97.940 4021 - 753.236 -50.459 97.940 BGL 0.114

753.244 5047.658 97.940 4023 - 753.244 -52.342 97.940 BGL 0.114

753.244 5047.658 100.485 4025 - 753.244 -52.342 100.485 BGL 0.114

754.194 5047.662 100.485 SE42 - 754.194 -52.338 100.485 VUU

757.504 5047.675 100.485 4029 - 757.504 -52.325 100.485 BGL 0.114

757.504 5047.675 103.235 4031 - 757.504 -52.325 103.235 BGL 0.114

757.501 5048.575 103.235 SE43 - 757.501 -51.425 103.235 VUU

757.490 5051.232 103.235 4035 - 757.490 -48.767 103.235 VUU
757.488 5051.575 103.235 SE44 - 757.488 -48.425 103.235 VUU
757.476 5054.575 103.235 SE45 SE44 -0.012 3.000 0.000 VUU
757.464 5057.575 103.235 SE47 SE45 -0.012 3.000 0.000 VUU
767.315 5061.695 101.112 3443 - 767.315 -38.305 101.112 PGR
767.039 5061.694 101.112 3441 - 767.039 -38.306 101.112 BGL 0.076

767.043 5060.564 101.112 SE12 - 767.043 -39.436 101.112 VUU

767.044 5060.453 101.112 3437 - 767.044 -39.547 101.112 BGL 0.076

767.044 5060.453 102.698 3435 - 767.044 -39.547 102.698 BGL 0.076

767.941 5060.457 102.698 3431 - 767.941 -39.543 102.698 BGL 0.076

ne= 1.00
767.941 5060.457 102.622 3429 3431 0.000 0.000 -0.076 VUU
767.941 5060.457 102.558 3427 - 767.941 -39.543 102.558 VUU
767.941 5060.457 102.371 3425 3427 0.000 0.000 -0.187 VUU
767.941 5060.457 102.309 A079 3425 0.000 0.000 -0.062 PGR
767.941 5060.457 102.307 3423 A079 0.000 0.000 -0.002 VUU
767.941 5060.457 102.243 3421 3423 0.000 0.000 -0.064 TFS
767.941 5060.457 102.179 3447 3421 0.000 0.000 -0.064 VUU
767.941 5060.457 102.177 A080 3447 0.000 0.000 -0.002 PGR
767.941 5060.457 102.115 3449 A080 0.000 0.000 -0.062 VUU
767.941 5060.457 101.918 3451 3449 0.000 0.000 -0.197 VUU
767.941 5060.457 101.527 3459 - 767.941 -39.543 101.527 VUU
767.941 5060.457 101.340 3461 3459 0.000 0.000 -0.187 VUU
767.941 5060.457 101.276 3463 - 767.941 -39.543 101.276 VUU
767.941 5060.457 101.200 3465 3463 0.000 0.000 -0.076 BGL 0.076
ne= 1.00
767.941 5060.568 101.200 SE46 - 767.941 -39.432 101.200 VUU
767.938 5061.230 101.200 3469 SE46 -0.003 0.662 0.000 PGR
767.937 5061.378 101.200 3471 3469 -0.001 0.148 0.000 TWA
767.942 5060.393 102.243 263 - 767.942 -39.607 102.243 PGR
767.942 5060.241 102.243 261 263 0.001 -0.152 0.000 VUU
767.942 5060.177 102.243 249 261 0.000 -0.064 0.000 TFS
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 103
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

768.688 5061.381 100.300 BC03 - 768.688 -38.619 100.300 PGR

768.388 5061.380 100.300 SE13 BC03 -0.300 -0.001 0.000 VUU
767.938 5061.378 100.300 3479 - 767.938 -38.622 100.300 BGL 0.305

767.938 5061.378 102.050 3511 - 767.938 -38.622 102.050 BGL 0.305

766.138 5061.371 102.050 SE14 - 766.138 -38.629 102.050 VUU

760.138 5061.346 102.050 SE15 SE14 -6.000 -0.025 0.000 VUU
758.208 5061.338 102.050 3517 - 758.208 -38.662 102.050 BGL 0.305

758.208 5061.338 103.300 3519 - 758.208 -38.662 103.300 BGL 0.305

758.217 5059.178 103.300 SE16 - 758.217 -40.822 103.300 VUU

758.236 5054.578 103.300 SE17 SE16 0.019 -4.600 0.000 VUU
758.248 5051.578 103.300 SE18 SE17 0.012 -3.000 0.000 VUU
758.250 5051.282 103.300 3527 - 758.250 -48.718 103.300 VUU
758.258 5049.136 103.300 3529 - 758.258 -50.864 103.300 BGL 0.305

758.259 5049.047 103.211 SE19 3529 0.000 -0.089 -0.089 VUU

758.259 5048.958 103.121 3533 SE19 0.000 -0.089 -0.089 BGL 0.305

758.259 5048.958 100.150 3535 - 758.259 -51.042 100.150 BGL 0.305

758.254 5050.278 100.150 3537 - 758.254 -49.722 100.150 BGL 0.305

758.254 5050.278 99.043 3539 - 758.254 -49.722 99.043 PGR

758.254 5050.278 98.840 3541 3539 0.000 0.000 -0.203 TFS
767.942 5060.177 102.179 251 - 767.942 -39.823 102.179 VUU
767.942 5060.177 102.177 A090 251 0.000 0.000 -0.002 PGR
767.942 5060.177 102.109 9011 A090 0.000 0.000 -0.068 PGR
767.942 5060.177 101.923 3389 9011 0.000 0.000 -0.187 VUU
767.942 5060.177 101.527 3395 - 767.942 -39.823 101.527 VUU
767.942 5060.177 101.340 3397 3395 0.000 0.000 -0.187 VUU
767.942 5060.177 101.276 3399 - 767.942 -39.823 101.276 VUU
767.942 5060.177 101.200 3401 3399 0.000 0.000 -0.076 BGL 0.076
ne= 1.00
767.663 5060.176 101.200 SE25 - 767.663 -39.824 101.200 VUU
767.442 5060.175 101.200 3405 - 767.442 -39.825 101.200 BGL 0.076

767.440 5060.771 101.200 3407 - 767.440 -39.229 101.200 PGR

767.439 5060.946 101.200 3409 3407 -0.001 0.175 0.000 TWA
767.439 5060.946 99.896 BC01 - 767.439 -39.054 99.896 VUU
767.439 5060.946 102.077 3627 - 767.439 -39.054 102.077 BGL 0.381

766.140 5060.940 102.077 SE27 - 766.140 -39.059 102.077 VUU

760.140 5060.916 102.077 SE26 SE27 -6.000 -0.025 0.000 VUU
758.700 5060.910 102.077 3621 - 758.700 -39.090 102.077 BGL 0.381

758.700 5060.910 103.327 3619 - 758.700 -39.090 103.327 BGL 0.381

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 104
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

758.707 5059.180 103.327 SE24 - 758.707 -40.820 103.327 VUU

758.726 5054.580 103.327 SE23 SE24 0.019 -4.600 0.000 VUU
758.747 5049.508 103.327 3611 - 758.747 -50.492 103.327 VUU
758.751 5048.580 103.327 SE22 - 758.751 -51.420 103.327 VUU
758.753 5047.880 103.327 3607 - 758.753 -52.120 103.327 BGL 0.381

758.753 5047.880 102.946 3605 3607 0.000 0.000 -0.381 VUU

758.753 5047.880 102.787 3603 - 758.753 -52.120 102.787 BGL 0.381

759.244 5047.882 102.297 3601 - 759.244 -52.118 102.297 BGL 0.381

759.244 5047.882 97.312 3597 - 759.244 -52.118 97.312 VUU

759.244 5047.882 96.973 3595 3597 0.000 0.000 -0.339 VUU
759.244 5047.882 96.871 3593 - 759.244 -52.118 96.871 VUU
759.244 5047.882 96.713 3591 3593 0.000 0.000 -0.158 BGL 0.381
ne= 1.00
759.243 5047.993 96.602 SE21 3591 -0.000 0.112 -0.112 VUU
759.243 5048.105 96.490 3587 SE21 -0.000 0.112 -0.112 BGL 0.381

759.239 5048.996 96.490 3583 - 759.239 -51.005 96.490 PGR

759.239 5049.084 96.451 3581 3583 -0.000 0.089 -0.040 RKR
alpha= 40.00
759.238 5049.173 96.411 3579 3581 -0.000 0.089 -0.040 VUU
759.238 5049.175 96.411 A076 3579 -0.000 0.002 0.000 PGR
759.238 5049.259 96.411 3577 A076 -0.000 0.084 0.000 VUU
759.236 5049.637 96.411 3575 3577 -0.002 0.377 0.000 VUU
759.236 5049.721 96.411 A077 3575 -0.000 0.084 0.000 PGR
759.236 5049.723 96.411 3573 A077 -0.000 0.002 0.000 VUU
759.236 5049.812 96.451 3571 3573 -0.000 0.089 0.040 RKR
alpha= 40.00
759.235 5049.901 96.490 3569 3571 -0.000 0.089 0.040 PGR
759.235 5050.059 96.490 3567 3569 -0.001 0.158 0.000 BGL 0.381

759.234 5050.170 96.602 SE20 3567 -0.000 0.112 0.112 VUU

759.234 5050.282 96.713 3563 SE20 -0.000 0.112 0.112 BGL 0.381
ne= 1.00
759.234 5050.282 96.871 3561 3563 0.000 0.000 0.158 VUU
759.234 5050.282 96.973 3559 - 759.234 -49.718 96.973 VUU
759.234 5050.282 97.312 3557 3559 0.000 0.000 0.339 VUU
759.234 5050.282 98.840 3553 - 759.234 -49.718 98.840 BGL 0.381

758.470 5050.279 98.840 3551 - 758.470 -49.721 98.840 PGR

758.038 5050.277 98.840 3655 3551 -0.432 -0.002 0.000 VUU
755.134 5050.265 98.840 3657 - 755.134 -49.735 98.840 BGL 0.381

755.134 5050.265 96.713 3659 - 755.134 -49.735 96.713 BGL 0.381

755.134 5050.153 96.602 SE28 3659 0.000 -0.112 -0.112 VUU

755.135 5050.042 96.490 3663 SE28 0.000 -0.112 -0.112 BGL 0.381
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 105
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

755.137 5049.603 96.490 3667 - 755.137 -50.397 96.490 PGR

755.137 5049.514 96.477 3669 3667 0.000 -0.089 -0.013 RKR
alpha= 16.00
755.137 5049.425 96.463 3671 3669 0.000 -0.089 -0.013 PGR
755.137 5049.423 96.463 A060 3671 0.000 -0.002 0.000 PGR
755.138 5049.313 96.463 3673 A060 0.000 -0.110 0.000 VUU
755.140 5048.736 96.463 3675 3673 0.002 -0.577 0.000 VUU
755.141 5048.626 96.463 A058 3675 0.000 -0.110 0.000 PGR
755.141 5048.624 96.463 3677 A058 0.000 -0.002 0.000 PGR
755.141 5048.535 96.477 3679 3677 0.000 -0.089 0.013 RKR
alpha= 16.00
755.141 5048.446 96.490 3681 3679 0.000 -0.089 0.013 PGR
755.142 5048.288 96.490 3683 3681 0.001 -0.158 0.000 BGL 0.381

755.142 5048.177 96.602 SE29 3683 0.000 -0.112 0.112 VUU

755.143 5048.065 96.713 3687 SE29 0.000 -0.112 0.112 BGL 0.381

755.143 5048.065 100.577 3689 - 755.143 -51.935 100.577 BGL 0.381

755.708 5048.067 100.577 1105 - 755.708 -51.933 100.577 PGR

755.924 5048.068 100.577 1091 1105 0.216 0.001 0.000 TFS
756.140 5048.069 100.577 1107 1091 0.216 0.001 0.000 PGR
757.193 5048.073 100.577 SE48 1107 1.053 0.004 0.000 VUU
758.243 5048.078 100.577 3699 - 758.243 -51.922 100.577 BGL 0.381

758.243 5048.078 103.327 3701 - 758.243 -51.922 103.327 BGL 0.381

758.249 5046.578 103.327 SE49 - 758.249 -53.422 103.327 VUU

758.254 5045.377 103.327 3705 - 758.254 -54.622 103.327 BGL 0.381

763.204 5045.398 103.327 SE50 - 763.204 -54.602 103.327 VUU

765.722 5045.408 103.327 3711 - 765.722 -54.592 103.327 BGL 0.381

765.722 5045.408 98.930 3713 - 765.722 -54.592 98.930 BGL 0.381

765.990 5045.679 98.930 3715 3713 0.268 0.271 0.000 VUU

766.102 5045.792 98.930 3717 - 766.102 -54.208 98.930 BGL 0.381

766.100 5046.330 98.930 SE51 - 766.100 -53.670 98.930 VUU

766.097 5047.078 98.930 N17 - 766.097 -52.922 98.930 VUU
766.095 5047.988 98.930 9419 - 766.095 -52.012 98.930 PGR
766.093 5047.988 99.840 9411 9419 -0.002 -0.000 0.910 PGR
766.086 5049.728 99.840 9413 9411 -0.007 1.740 0.000 PGR
766.065 5054.948 99.840 9415 9413 -0.021 5.220 0.000 PGR
766.058 5056.688 99.840 9417 9415 -0.007 1.740 0.000 PGR
762.085 5049.925 98.365 EQ08 - 762.085 -50.075 98.365
762.070 5053.625 98.365 EQ07 - 762.070 -46.375 98.365
769.099 5071.357 101.413 571 - 769.099 -28.643 101.413 VUU
769.099 5071.354 101.413 8945 571 0.000 -0.002 0.000 PGR
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 106
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

769.099 5071.292 101.413 573 8945 0.000 -0.062 0.000 VUU

769.100 5071.106 101.413 575 573 0.001 -0.187 0.000 VUU
769.399 5071.354 101.680 387 - 769.399 -28.646 101.680 VUU
769.399 5071.292 101.680 8939 387 0.000 -0.062 0.000 PGR
769.400 5071.105 101.680 391 8939 0.001 -0.187 0.000 VUU
767.942 5060.177 102.307 247 - 767.942 -39.823 102.307 VUU
767.942 5060.177 102.309 A091 247 0.000 0.000 0.002 PGR
767.942 5060.177 102.377 9487 A091 0.000 0.000 0.068 PGR
767.942 5060.177 102.602 239 9487 0.000 0.000 0.225 VUU
767.942 5060.177 102.833 235 - 767.942 -39.823 102.833 TWA
767.942 5060.177 103.891 A059 - 767.942 -39.823 103.891 BGL 0.076

767.941 5060.457 103.891 267 - 767.941 -39.543 103.891 BGL 0.076

770.730 5060.468 103.891 269 - 770.730 -39.532 103.891 BGL 0.076

770.723 5061.761 103.891 S114 - 770.723 -38.239 103.891 PGR

770.707 5065.219 103.891 S115 S114 -0.016 3.458 0.000 PGR
770.697 5068.623 103.891 S116 S115 -0.010 3.404 -0.000 PGR
770.696 5068.874 103.891 271 - 770.696 -31.127 103.891 VUU
770.695 5069.098 103.891 273 271 -0.001 0.225 0.000 VUU
770.688 5070.781 103.891 275 - 770.688 -29.219 103.891 BGL 0.076

770.508 5070.780 103.891 9429 - 770.508 -29.220 103.891 PGR

770.419 5070.780 103.887 281 9429 -0.089 0.000 -0.004 TFS
768.061 5060.178 102.833 255 - 768.061 -39.822 102.833 KUH
768.138 5060.178 102.833 257 255 0.076 0.000 0.000 KUH
755.924 5048.068 100.761 1089 - 755.924 -51.932 100.761 PGR
755.924 5048.068 100.979 1087 - 755.924 -51.932 100.979 VUU
755.924 5048.068 101.231 1085 1087 0.000 0.000 0.252 VUU
755.924 5048.068 101.307 1079 - 755.924 -51.932 101.307 PGR
755.924 5048.068 101.460 1077 1079 0.000 0.000 0.152 BGL 0.152
ne= 1.00
755.928 5047.030 101.460 1075 - 755.928 -52.970 101.460 BGL 0.152

755.928 5047.030 96.579 1073 - 755.928 -52.970 96.579 BGL 0.152

755.972 5047.030 96.535 S128 - 755.972 -52.970 96.535 VUU

756.017 5047.030 96.490 1069 S128 0.045 0.000 -0.045 BGL 0.152

756.470 5047.032 96.490 1067 - 756.470 -52.968 96.490 VUU

756.843 5047.033 96.490 1065 1067 0.373 0.002 0.000 VUU
757.292 5047.035 96.490 1063 - 757.292 -52.965 96.490 BGL 0.152

757.336 5047.036 96.535 S127 1063 0.045 0.000 0.045 VUU

757.380 5047.036 96.579 1059 - 757.380 -52.964 96.579 BGL 0.152

757.380 5047.036 100.697 1057 - 757.380 -52.964 100.697 BGL 0.152

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 107
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

759.267 5047.043 100.697 S126 - 759.267 -52.957 100.697 VUU

759.629 5047.045 100.697 1053 - 759.629 -52.955 100.697 BGL 0.152

759.629 5047.045 101.957 1051 - 759.629 -52.955 101.957 BGL 0.152

759.625 5048.083 101.957 1049 - 759.625 -51.917 101.957 BGL 0.152

760.560 5048.087 101.957 1047 - 760.560 -51.913 101.957 BGL 0.152

760.560 5048.087 103.247 1045 - 760.560 -51.913 103.247 BGL 0.152

760.558 5048.589 103.247 S125 - 760.558 -51.411 103.247 VUU

760.533 5054.592 103.247 S124 S125 -0.025 6.003 0.000 VUU
760.527 5055.979 103.247 1039 - 760.527 -44.021 103.247 BGL 0.152

760.527 5055.979 104.039 1037 - 760.527 -44.021 104.039 BGL 0.152

761.031 5055.981 104.039 1035 - 761.031 -44.019 104.039 BGL 0.152

761.025 5057.591 104.039 S123 - 761.025 -42.409 104.039 VUU

761.023 5057.927 104.039 1031 - 761.023 -42.073 104.039 BGL 0.152

762.778 5057.934 104.039 1029 - 762.778 -42.066 104.039 BGL 0.152

762.767 5060.743 104.039 1027 - 762.767 -39.257 104.039 BGL 0.152

762.767 5060.743 104.497 1025 - 762.767 -39.257 104.497 BGL 0.152

763.140 5060.744 104.497 S122 - 763.140 -39.256 104.497 VUU

766.140 5060.757 104.497 S121 S122 3.000 0.012 0.000 VUU
770.460 5060.774 104.497 1019 - 770.460 -39.226 104.497 BGL 0.152

770.460 5060.774 103.887 1017 - 770.460 -39.226 103.887 BGL 0.152

770.454 5061.761 103.887 S120 - 770.454 -38.239 103.887 VUU

770.438 5065.219 103.887 S119 S120 -0.016 3.458 0.000 PGR
770.436 5066.656 103.887 9275 - 770.436 -33.344 103.887 PGR
770.431 5067.813 103.887 9277 9275 -0.005 1.157 0.000 PGR
770.428 5068.623 103.887 S118 - 770.428 -31.377 103.887 VUU
770.419 5070.675 103.886 1099 S118 -0.009 2.053 -0.001 VUU
770.419 5070.885 103.887 283 1099 -0.000 0.210 0.001 PGR
770.416 5071.448 103.887 285 - 770.416 -28.552 103.887 BGL 0.152

770.416 5071.448 102.337 289 - 770.416 -28.552 102.337 VUU

770.416 5071.448 102.028 291 289 0.000 0.000 -0.309 VUU
770.416 5071.448 101.663 293 291 0.000 0.000 -0.365 VUU
770.416 5071.448 101.579 8971 293 0.000 0.000 -0.084 PGR
770.416 5071.448 101.577 295 8971 0.000 0.000 -0.002 VUU
770.416 5071.448 101.472 297 295 0.000 0.000 -0.105 TFS
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 108
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ABSOLUTE COORDINATES NODES DIFF. COORDINATES COMPONENTS

--------------------------------------------------------------------------
Xa(m) Ya(m) Za(m) PKT BPKT DX(m) DY(m) DZ(m) ABT R(m)

770.416 5071.448 101.367 299 297 0.000 0.000 -0.105 VUU

770.416 5071.448 101.365 8969 299 0.000 0.000 -0.002 PGR
770.416 5071.448 101.281 305 8969 0.000 0.000 -0.084 VUU
770.416 5071.448 100.953 307 305 0.000 0.000 -0.328 VUU
770.416 5071.448 100.840 S117 - 770.416 -28.552 100.840 PGR
770.416 5071.448 100.152 BC04 S117 0.000 0.000 -0.688 VUU
766.086 5049.728 98.360 EQ06 - 766.086 -50.272 98.360
766.065 5054.948 98.360 EQ05 - 766.065 -45.052 98.360
770.417 5071.359 101.472 315 - 770.417 -28.641 101.472 VUU
770.418 5071.163 101.472 317 - 770.418 -28.837 101.472 VUU
770.419 5070.938 101.472 319 317 0.001 -0.225 0.000 VUU
765.861 5043.117 108.252 &001 - 765.861 -56.883 108.252
763.627 5041.660 108.254 &002 - 763.627 -58.340 108.254
763.206 5044.330 106.977 &003 - 763.206 -55.670 106.977
765.042 5043.113 106.594 &004 - 765.042 -56.887 106.594
766.045 5043.117 108.300 &005 - 766.045 -56.883 108.300
764.354 5043.110 107.679 &006 - 764.354 -56.890 107.679
767.942 5060.177 103.833 &007 - 767.942 -39.823 103.833
769.399 5071.433 100.680 &008 - 769.399 -28.568 100.680
691.678 5072.485 98.362 &009 - 691.678 -27.515 98.362
692.972 5073.856 96.713 &012 - 692.972 -26.143 96.713
692.973 5073.690 96.713 &013 - 692.973 -26.309 96.713
692.972 5073.923 96.713 &014 - 692.972 -26.077 96.713
690.673 5073.681 96.713 &017 - 690.673 -26.319 96.713
692.973 5073.746 96.237 &020 - 692.973 -26.254 96.237
690.673 5073.736 98.237 &023 - 690.673 -26.264 98.237
689.677 5072.677 98.362 &024 - 689.677 -27.323 98.362
760.489 5061.989 105.046 &025 - 760.489 -38.011 105.046
766.526 5062.014 105.078 &026 - 766.526 -37.986 105.078
690.673 5073.736 98.806 &027 - 690.673 -26.264 98.806
770.419 5071.780 103.891 &028 - 770.419 -28.220 103.891
764.719 5061.031 104.424 &029 - 764.719 -38.969 104.424
678.734 5072.091 96.540 &030 - 678.734 -27.909 96.540
678.730 5073.027 96.540 &031 - 678.730 -26.973 96.540
678.730 5073.127 96.540 &032 - 678.730 -26.873 96.540
753.415 5060.147 98.677 &033 - 753.415 -39.853 98.677
675.012 5058.464 118.135 &042 - 675.012 -41.536 118.135
674.812 5058.463 116.288 &047 - 674.812 -41.537 116.288
673.212 5058.457 118.288 &048 - 673.212 -41.543 118.288
767.188 5039.722 101.006 &051 - 767.188 -60.278 101.006
753.415 5058.438 96.441 &052 - 753.415 -41.562 96.441
766.852 5035.640 101.595 &053 - 766.852 -64.360 101.595
753.245 5047.357 98.540 &060 - 753.245 -52.643 98.540
767.437 5061.696 100.112 &061 - 767.437 -38.304 100.112
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 109
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DETERMINATION OF LINE MASSES OF PIPES

-------------------------------------
<---Dimension [mm]---> <--Density [kg/m³]--> <----Line mass [kg/m]---->
DA S Ins Jack Pipe Ins Jack Med Pipe Ins Med Total

2950.0 25.00 0 7833 0 8725.0 0.0 0.0 8725.0U

2340.0 20.00 0 7833 0 6270.0 0.0 0.0 6270.0U
1316.0 13.00 0 7833 0 4312.0 0.0 0.0 4312.0U
1194.0 22.00 0 7833 0 3124.0 0.0 0.0 3124.0U
914.4 9.52 0 7833 0 212.1 0.0 0.0 212.1
914.4 9.52 0 7750 0 209.9 0.0 0.0 209.9
812.8 9.52 0 7833 0 188.3 0.0 0.0 188.3
812.8 9.52 0 7750 0 186.3 0.0 0.0 186.3
273.1 15.09 0 7833 0 95.8 0.0 0.0 95.8
273.0 7.80 40 1.0 7750 130 2700 880 50.4 8.1 45.8 104.3
219.1 15.09 0 7833 0 75.7 0.0 0.0 75.7
219.1 12.70 0 7750 0 63.8 0.0 0.0 63.8
219.1 12.70 0 7833 0 64.5 0.0 0.0 64.5
219.1 7.04 50 1.0 7750 130 2700 880 36.3 8.2 29.0 73.6
219.1 7.04 40 1.0 7750 130 2700 880 36.3 6.8 29.0 72.1
168.3 10.97 0 7750 0 42.0 0.0 0.0 42.0
168.3 7.11 60 1.0 7750 130 2700 880 27.9 8.0 16.4 52.4
168.3 7.11 50 1.0 7750 130 2700 880 27.9 6.7 16.4 51.1
168.3 7.11 40 1.0 7750 130 2700 880 27.9 5.5 16.4 49.8
168.3 7.11 0 7750 880 27.9 0.0 16.4 44.3
114.3 6.02 60 1.0 7750 130 2700 880 15.9 6.3 7.2 29.4
114.3 6.02 60 1.0 7750 130 2700 0 15.9 6.3 0.0 22.1
114.3 6.02 50 1.0 7750 130 2700 880 15.9 5.2 7.2 28.3
114.3 6.02 40 1.0 7750 130 2700 880 15.9 4.2 7.2 27.3
114.3 6.02 0 7750 880 15.9 0.0 7.2 23.1
88.9 5.49 60 1.0 7750 130 2700 880 11.1 5.4 4.2 20.8
88.9 5.49 50 1.0 7750 130 2700 880 11.1 4.4 4.2 19.8
88.9 5.49 40 1.0 7750 130 950 880 11.1 2.6 4.2 18.0
88.9 5.49 0 7750 880 11.1 0.0 4.2 15.3
60.3 11.07 40 1.0 7750 130 2700 880 13.3 2.8 1.0 17.1
60.3 5.54 40 1.0 7750 130 2700 880 7.4 2.8 1.7 11.9
60.3 3.91 60 1.0 7750 130 2700 880 5.4 4.5 1.9 11.8
60.3 3.91 50 1.0 7750 130 2700 880 5.4 3.6 1.9 10.9
60.3 3.91 40 1.0 7750 130 2700 880 5.4 2.8 1.9 10.1
60.3 3.91 30 1.0 7750 130 2700 880 5.4 2.1 1.9 9.4
60.3 3.91 0 7750 880 5.4 0.0 1.9 7.3
33.4 4.55 60 1.0 7750 130 2700 880 3.2 3.6 0.4 7.2
33.4 4.55 60 1.0 7833 130 2700 880 3.2 3.6 0.4 7.2
33.4 4.55 40 1.0 7750 130 2700 880 3.2 2.2 0.4 5.8
33.4 4.55 0 7750 880 3.2 0.0 0.4 3.6
33.4 4.55 0 7833 880 3.2 0.0 0.4 3.6
33.4 3.91 40 1.0 7750 130 2700 880 2.8 2.2 0.5 5.4
33.4 3.38 40 1.0 7750 130 2700 880 2.5 2.2 0.5 5.1
33.4 3.38 30 1.0 7750 130 2700 880 2.5 1.6 0.5 4.5
26.7 3.91 60 1.0 7750 130 2700 880 2.2 3.4 0.2 5.8
26.7 3.91 60 1.0 7833 130 2700 880 2.2 3.4 0.2 5.8
26.7 3.91 0 7750 880 2.2 0.0 0.2 2.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 110
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DETERMINATION OF LINE MASSES OF VALVES

--------------------------------------
Line Node 1 Node 2 Length Weight Line mass Description
[mm] [kg] [kg/m]

1 1775 1773 76 10.00 135.84

2 1729 1727 365 68.00 200.79
3 1745 1747 331 51.00 168.37
3 1305 1307 314 78.00 262.85
3 1319 1321 326 51.00 166.55 TV-390
3 1333 1335 314 78.00 262.85
4 1763 1765 76 10.00 135.84
5 1183 1181 331 51.00 168.37
5 1165 1163 365 68.00 200.79
6 1211 1213 76 10.00 135.84
7 1565 1567 76 10.00 135.84
8 1201 1203 76 10.00 135.84
9 1707 1705 60 5.00 87.06
10 1441 1443 314 78.00 262.85
10 1455 1457 326 51.00 166.55 TV-390A
10 1467 1469 314 78.00 262.85
11 1551 1553 76 15.00 201.46
12 1571 1573 76 10.00 135.84
13 1143 1141 60 5.00 87.06
14 1757 1755 63 5.00 82.88
15 1559 1561 225 12.50 62.49
19 1821 1823 16 1.00 70.12 Spectacle Blind
19 1823 1825 16 1.00 70.12 Spectacle Blind
20 C043 C041 408 144.00 377.17
20 C041 C039 453 136.00 323.86
20 C031 C029 377 84.00 235.74
21 B969 B971 326 55.00 177.73
23 1659 1661 76 15.00 201.46
25 1195 1193 64 5.00 82.88
26 231 227 16 1.00 70.12 Spectacle Blind
26 237 231 16 1.00 70.12 Spectacle Blind
27 89 87 225 21.00 98.51
27 85 71 114 22.00 100.83 PSV-020A
27 93 85 116 22.00 98.70 PSV-020A
30 127 129 76 5.00 68.61
34 9153 D079 428 139.00 362.76
34 9185 9183 229 100.00 460.65
34 C965 C967 428 139.00 362.76
35 D067 9161 453 100.00 244.47
38 1693 1695 225 28.00 131.41
39 141 143 225 21.00 98.51
39 157 159 114 22.00 100.83 PSV-020B
39 155 157 116 22.00 98.70 PSV-020B
40 97 51 276 31.00 117.57
41 177 179 76 5.00 68.61
42 F155 F157 765 3390.00 4430.21
43 121 123 76 5.00 68.65
46 1699 1701 225 28.00 131.41
47 167 165 187 21.00 117.48
48 183 185 76 5.00 68.65
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 111
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DETERMINATION OF LINE MASSES OF VALVES

--------------------------------------
Line Node 1 Node 2 Length Weight Line mass Description
[mm] [kg] [kg/m]

49 65 67 187 21.00 117.48

52 895 893 223 36.00 165.56
53 927 929 60 5.00 83.16
54 861 863 223 36.00 165.56
55 949 951 60 5.00 83.16
56 817 981 212 36.00 173.85
56 969 967 223 36.00 165.56
59 989 991 187 21.00 114.33
61 767 765 250 28.00 116.06
61 757 755 223 36.00 165.56
62 785 787 60 5.00 83.16
63 779 781 76 5.00 66.02
64 9353 9355 944 50.00 57.15
64 617 615 212 36.00 173.85
64 605 603 263 50.00 192.02 FV-071
65 743 745 60 5.00 83.16
66 689 691 223 36.00 165.56
66 699 701 250 28.00 116.06
67 791 793 76 5.00 66.03
68 719 717 109 5.00 46.28 SC-042
69 585 583 250 28.00 116.06
70 493 499 276 84.00 321.08
71 7881 7879 412 225.00 568.48
72 7803 7801 292 36.00 130.69
72 7785 7783 276 31.00 117.57
72 7829 7831 287 36.00 132.76
73 735 737 76 5.00 66.03
74 591 593 212 36.00 173.85
75 9295 9293 1156 60.00 59.13
75 9291 1127 233 53.00 234.60
75 1127 1125 301 48.00 166.64
75 1113 1111 252 53.00 217.88
76 3949 3947 276 84.00 327.30
76 3939 3937 377 135.00 369.81
76 3919 3917 276 84.00 327.30
77 4005 4003 301 53.00 188.02
78 7857 7855 276 21.00 81.30
79 797 799 60 5.00 83.16
80 727 729 76 5.00 66.03
81 9283 9279 1144 50.00 47.89
81 539 541 208 36.00 177.52
81 541 543 250 28.00 116.06
81 555 557 223 36.00 165.67
82 377 375 212 36.00 173.85
82 9289 9285 1144 50.00 47.89
82 341 339 208 36.00 177.52
82 339 337 250 28.00 116.06
82 9483 323 223 36.00 165.67
83 1135 1137 187 21.00 114.33
85 3427 3425 187 21.00 117.55
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 112
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DETERMINATION OF LINE MASSES OF VALVES

--------------------------------------
Line Node 1 Node 2 Length Weight Line mass Description
[mm] [kg] [kg/m]

85 3449 3451 197 21.00 111.62

85 3459 3461 187 21.00 117.55
88 9011 3389 187 21.00 117.55
88 3395 3397 187 21.00 117.55
89 3597 3595 339 201.00 647.27
89 3577 3575 377 84.00 234.64
89 3559 3557 339 201.00 647.27
89 3673 3675 577 449.00 814.28
92 573 575 187 21.00 114.33
93 8939 391 187 21.00 114.32
94 9487 239 225 28.00 128.87
94 271 273 225 28.00 128.87
95 255 257 76 10.00 133.58
96 1087 1085 252 53.00 223.76
96 1067 1065 373 84.00 238.43 HV-301
96 9275 9277 1157 60.00 64.97
96 289 291 309 78.00 265.29
96 291 293 365 68.00 199.61
96 305 307 328 78.00 251.05
99 317 319 225 21.00 99.35
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 113
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 1
N8 A117 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
A117 1787 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL
Bend 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
1787 1785 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA234WPB UL
1785 9459 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA234WPB UL
9459 1775 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL
Bend 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA-105_ UL
1773 $000 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL
Bend 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA-105_ UL
$000 1735 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL

Line 2
1735 ~307 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
~307 1729 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1727 ~306 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
~306 1713 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1713 1715 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1715 1717 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1717 A035 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA106B UL
Bend 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
A035 N7 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA-105_ UL

Line 3
1735 9235 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
9235 1745 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1747 ~316 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
~316 1229 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1229 1235 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
1235 1299 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1299 1303 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
1303 ~347 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
~347 1305 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1307 ~348 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
~348 1313 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1313 1315 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1315 1317 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1317 A032 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA106B UL
Bend 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
A032 1319 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA-105_ UL
1321 A033 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA-105_ UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 114
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

A033 1323 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA106B UL
Bend 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1323 1325 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1325 1327 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1327 ~346 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
~346 1333 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1335 ~358 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
~358 1339 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1339 1343 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
1343 1433 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1433 $001 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
$001 1435 114.3 6.0 37.4 0.0 0.0 260.0 20.3 SA234WPB UL

Line 4
1733 $002 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL
$002 1763 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL

Line 5
1187 $003 114.3 6.0 37.4 0.0 0.0 260.0 20.3 SA234WPB UL
$003 1185 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
1185 ~300 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
~300 1183 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1181 9227 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
9227 ~291 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
~291 1165 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1163 ~290 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
~290 1149 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1149 1151 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1151 1153 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1153 A036 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA106B UL
Bend 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
A036 N9 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA-105_ UL

Line 6
1171 $004 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL
$004 1211 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL
Bend 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA-105_ UL
1213 9457 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL
Bend 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA-105_ UL
9457 1223 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA234WPB UL
1223 356 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA234WPB UL
356 A116 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL
Bend 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
A116 N10 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 115
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 7
1311 $005 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL
$005 1565 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL

Line 8
1169 $006 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL
$006 1201 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL

Line 9
1709 $007 26.7 3.9 50.8 0.0 0.0 260.0 20.3 SA106B UL
$007 1707 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL

Line 10
1301 $008 114.3 6.0 37.4 0.0 0.0 260.0 20.3 SA234WPB UL
$008 1437 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
1437 ~425 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
~425 1441 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1443 ~426 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
~426 1449 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1449 1451 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1451 1453 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1453 A040 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA106B UL
Bend 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
A040 1455 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA-105_ UL
1457 A041 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA-105_ UL
A041 1459 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA106B UL
Bend 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1459 1461 88.9 5.5 39.8 0.0 20.8 260.0 20.3 SA234WPB UL
1461 1463 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1463 ~427 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
~427 1467 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
1469 ~428 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
~428 1529 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1529 1533 114.3 6.0 37.4 0.0 36.0 260.0 20.3 SA234WPB UL
1533 1543 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1543 1545 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1545 1547 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA234WPB UL
1547 A083 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA106B UL
Bend 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA234WPB UL
A083 N5 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA-105_ UL
N5 ~685 168.3 11.0 12.5 0.0 42.0 315.0 0.0 SA-105_ UL
~685 $009 168.3 11.0 12.5 0.0 42.0 315.0 0.0 SA106B UL
$009 9129 168.3 11.0 12.5 0.0 0.0 315.0 0.0 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 116
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 11
1447 $010 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL
$010 1551 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL

Line 12
1329 $011 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL
$011 1571 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL

Line 13
1145 $012 26.7 3.9 50.8 0.0 0.0 260.0 20.3 SA106B UL
$012 1143 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL

Line 14
1731 $013 26.7 3.9 50.8 0.0 0.0 260.0 20.3 SA106B UL
$013 1757 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL
Bend 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
1755 $014 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL
Bend 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
$014 1725 26.7 3.9 50.8 0.0 0.0 260.0 20.3 SA106B UL

Line 15
1531 $015 60.3 3.9 50.8 0.0 0.0 260.0 20.3 SA234WPB UL
$015 1557 60.3 3.9 50.8 0.0 14.0 260.0 20.3 SA234WPB UL
1557 A042 60.3 3.9 50.8 0.0 11.8 260.0 20.3 SA106B UL
A042 1559 60.3 3.9 50.8 0.0 11.8 260.0 20.3 SA-105_ UL

Line 17
9129 9127 1316.0 13.0 0.0 0.0 4312.0 315.0 0.0 SA-516_70 UL

Line 18
9129 9135 1316.0 13.0 0.0 0.0 4312.0 315.0 0.0 SA-516_70 UL

Line 19
9125 $016 219.1 12.7 12.5 0.0 0.0 315.0 0.0 SA106B UL
$016 ~684 219.1 12.7 12.5 0.0 63.8 315.0 0.0 SA106B UL
~684 N1 219.1 12.7 12.5 0.0 63.8 315.0 0.0 SA-105_ UL
N1 ~471 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
~471 ~478 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
~478 ~740 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
~740 ~742 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
~742 1821 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
1825 ~498 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
~498 $017 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
$017 C943 219.1 7.0 33.8 0.0 0.0 315.0 24.5 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 117
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 20
C943 C941 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
C941 C047 219.1 7.0 33.8 0.0 73.6 185.0 17.5 SA234WPB UL
C047 C045 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
C045 A089 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
A089 C043 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA-105_ UL
C039 A088 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA-105_ UL
A088 C037 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
C037 C035 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
C035 C033 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA234WPB UL
C033 9031 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA234WPB UL
9031 C031 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA-105_ UL
C029 9029 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA-105_ UL
9029 C027 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA234WPB UL
C027 C025 114.3 6.0 37.4 0.0 28.3 185.0 17.5 SA234WPB UL
C025 9199 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
9199 ~517 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
~517 ~518 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA-105_ UL
~518 ~519 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
~519 ~520 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA-105_ UL
~520 C005 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
C005 $018 168.3 7.1 33.6 0.0 70.4 185.0 17.5 SA234WPB UL
$018 B929 168.3 7.1 33.6 0.0 0.0 185.0 17.5 SA234WPB UL

Line 21
9197 B927 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
B927 B931 168.3 7.1 33.6 0.0 70.4 185.0 17.5 SA234WPB UL
B931 B933 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
B933 B935 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
B935 ~524 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
~524 ~523 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA-105_ UL
~523 ~522 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
~522 ~521 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA-105_ UL
~521 B945 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
B945 B947 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
B947 B949 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
B949 B963 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 118
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

B963 B965 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
B965 B967 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
B967 A050 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
A050 B969 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA-105_ UL
B971 A051 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA-105_ UL
A051 B973 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
B973 B975 88.9 5.5 39.8 0.0 19.8 185.0 17.5 SA234WPB UL
B975 B977 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
B977 A052 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA234WPB UL
A052 SE52 168.3 7.1 33.6 0.0 51.1 185.0 17.5 SA-105_ UL

Line 22
9137 $019 168.3 11.0 12.5 0.0 0.0 315.0 0.0 SA106B UL
$019 ~686 168.3 11.0 12.5 0.0 42.0 315.0 0.0 SA106B UL
~686 N6 168.3 11.0 12.5 0.0 42.0 315.0 0.0 SA-105_ UL
N6 ~739 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA-105_ UL
~739 1647 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA106B UL
Bend 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA234WPB UL
1647 1645 168.3 7.1 33.6 0.0 52.4 260.0 20.3 SA234WPB UL
1645 1643 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1643 9567 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL

Line 23
1641 $020 33.4 4.5 45.5 0.0 0.0 260.0 20.3 SA106B UL
$020 1659 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA106B UL
Bend 33.4 4.5 45.5 0.0 7.2 260.0 20.3 SA-105_ UL

Line 24
9567 1577 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1577 $021 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
$021 1341 114.3 6.0 37.4 0.0 0.0 260.0 20.3 SA234WPB UL

Line 25
1167 $022 26.7 3.9 50.8 0.0 0.0 260.0 20.3 SA106B UL
$022 1195 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL
Bend 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
1193 $023 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA106B UL
Bend 26.7 3.9 50.8 0.0 5.8 260.0 20.3 SA-105_ UL
$023 1161 26.7 3.9 50.8 0.0 0.0 260.0 20.3 SA106B UL

Line 26
9131 $024 219.1 12.7 12.5 0.0 0.0 315.0 0.0 SA106B UL
$024 ~683 219.1 12.7 12.5 0.0 63.8 315.0 0.0 SA106B UL
~683 N2 219.1 12.7 12.5 0.0 63.8 315.0 0.0 SA-105_ UL
N2 ~678 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 119
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

~678 ~491 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
~491 ~488 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
~488 ~496 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
~496 237 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
227 ~679 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
~679 ~681 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
~681 N3 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
N3 ~680 219.1 15.1 12.5 0.0 75.7 350.0 0.0 SA-105_ UL
~680 $025 219.1 15.1 12.5 0.0 75.7 350.0 0.0 SA-333_6 UL
$025 9111 219.1 15.1 12.5 0.0 0.0 350.0 0.0 SA-333_6 UL

Line 27
205 $026 60.3 3.9 50.8 0.0 0.0 315.0 24.5 SA106B UL
$026 117 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
117 103 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
103 99 60.3 3.9 50.8 0.0 16.1 315.0 24.5 SA234WPB UL
99 ~052 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
~052 89 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA-105_ UL
87 ~053 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA-105_ UL
~053 9139 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
9139 79 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
79 77 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA234WPB UL
77 A115 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA106B UL
Bend 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA234WPB UL
A115 93 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA-105_ UL
71 ~018 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
~018 69 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA106B UL

Line 28
9111 9119 1194.0 22.0 0.0 0.0 3124.0 350.0 0.0 SA-516_70 UL

Line 29
9111 9121 1194.0 22.0 0.0 0.0 3124.0 350.0 0.0 SA-516_70 UL

Line 30
95 $027 33.4 3.4 56.9 0.0 0.0 315.0 24.5 SA106B UL
$027 127 33.4 3.4 56.9 0.0 5.1 315.0 24.5 SA106B UL

Line 31
9123 $028 219.1 15.1 12.5 0.0 0.0 350.0 0.0 SA-333_6 UL
$028 ~682 219.1 15.1 12.5 0.0 75.7 350.0 0.0 SA-333_6 UL
~682 9113 219.1 15.1 12.5 0.0 75.7 350.0 0.0 SA-105_ UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 120
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 34
C943 C949 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
C949 9149 219.1 8.2 30.8 0.0 107.7 315.0 24.5 SA234WPB UL
9149 A084 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
A084 9153 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
D079 A053 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
A053 C955 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
C955 9175 219.1 8.2 30.8 0.0 78.6 315.0 24.5 SA234WPB UL
9175 9177 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA234WPB UL
9177 A086 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA234WPB UL
A086 9185 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA-105_ UL
9183 A087 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA-105_ UL
A087 9187 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA234WPB UL
9187 9155 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA234WPB UL
9155 9163 219.1 8.2 30.8 0.0 78.6 315.0 24.5 SA234WPB UL
9163 ~743 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
~743 C965 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
C967 A057 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA-105_ UL
A057 C969 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL
C969 C973 219.1 8.2 30.8 0.0 107.7 315.0 24.5 SA234WPB UL
C973 9147 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA106B UL
Bend 219.1 7.0 33.8 0.0 73.6 315.0 24.5 SA234WPB UL

Line 35
C951 $029 168.3 7.1 33.6 0.0 0.0 315.0 24.5 SA234WPB UL
$029 D059 168.3 7.1 33.6 0.0 69.9 315.0 24.5 SA234WPB UL
D059 ~535 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA234WPB UL
~535 D067 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA-105_ UL
9161 ~753 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA-105_ UL
~753 D075 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA106B UL
Bend 168.3 7.1 33.6 0.0 51.1 315.0 24.5 SA234WPB UL
D075 $030 168.3 7.1 33.6 0.0 69.9 315.0 24.5 SA234WPB UL
$030 C971 168.3 7.1 33.6 0.0 0.0 315.0 24.5 SA234WPB UL

Line 36
1435 1667 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
1667 1671 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1671 8993 114.3 6.0 37.4 0.0 36.0 260.0 20.3 SA234WPB UL
8993 A037 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 121
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

A037 N12 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
N12 ~694 114.3 6.0 37.4 0.0 22.1 260.0 20.3 SA-105_ UL
~694 9261 114.3 6.0 37.4 0.0 22.1 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 22.1 260.0 20.3 SA234WPB UL
9259 ~695 114.3 6.0 37.4 0.0 22.1 260.0 20.3 SA106B UL
~695 N11 114.3 6.0 37.4 0.0 22.1 260.0 20.3 SA-105_ UL
N11 A038 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA-105_ UL
A038 8995 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
8995 1685 114.3 6.0 37.4 0.0 36.0 260.0 20.3 SA234WPB UL

Line 37
1435 1679 114.3 6.0 37.4 0.0 36.5 260.0 20.3 SA234WPB UL
1679 1683 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA106B UL
Bend 114.3 6.0 37.4 0.0 29.4 260.0 20.3 SA234WPB UL
1683 1685 114.3 6.0 37.4 0.0 36.0 260.0 20.3 SA234WPB UL

Line 38
1685 $031 60.3 3.9 50.8 0.0 0.0 260.0 20.3 SA234WPB UL
$031 1691 60.3 3.9 50.8 0.0 14.0 260.0 20.3 SA234WPB UL
1691 ~381 60.3 3.9 50.8 0.0 11.8 260.0 20.3 SA106B UL
~381 1693 60.3 3.9 50.8 0.0 11.8 260.0 20.3 SA-105_ UL

Line 39
101 $032 60.3 3.9 50.8 0.0 0.0 315.0 24.5 SA234WPB UL
$032 133 60.3 3.9 50.8 0.0 16.1 315.0 24.5 SA234WPB UL
133 135 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
135 137 60.3 3.9 50.8 0.0 16.1 315.0 24.5 SA234WPB UL
137 ~044 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
~044 141 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA-105_ UL
143 ~045 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA-105_ UL
~045 9141 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
9141 151 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA234WPB UL
151 153 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA234WPB UL
153 A114 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA106B UL
Bend 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA234WPB UL
A114 155 33.4 3.9 50.8 0.0 5.4 315.0 24.5 SA-105_ UL
159 ~687 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
~687 163 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA106B UL

Line 40
73 $033 60.3 3.9 50.8 0.0 0.0 315.0 24.5 SA234WPB UL
$033 75 60.3 3.9 50.8 0.0 16.1 315.0 24.5 SA234WPB UL
75 ~048 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA106B UL
~048 97 60.3 3.9 50.8 0.0 10.1 315.0 24.5 SA-105_ UL
51 ~031 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
~031 ~688 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA106B UL
Bend 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 122
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

~688 ~689 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
~689 T067 60.3 11.1 39.6 0.0 17.1 233.0 3.5 SA106B UL
Bend 60.3 11.1 39.6 0.0 17.1 233.0 3.5 SA234WPB UL

Line 41
145 $034 33.4 3.4 56.9 0.0 0.0 315.0 24.5 SA106B UL
$034 177 33.4 3.4 56.9 0.0 5.1 315.0 24.5 SA106B UL

Line 42
9427 F133 812.8 9.5 44.0 0.0 188.3 233.0 3.5 SA-672_C65 UL
Bend 812.8 9.5 44.0 0.0 186.3 233.0 3.5 SA234WPB UL
F133 F135 812.8 9.5 44.0 0.0 188.3 233.0 3.5 SA234WPB UL
F135 F137 914.4 9.5 44.0 0.0 212.1 233.0 3.5 SA234WPB UL
F137 ~662 914.4 9.5 44.0 0.0 212.1 233.0 3.5 SA-672_C65 UL
Bend 914.4 9.5 44.0 0.0 209.9 233.0 3.5 SA234WPB UL
~662 F155 914.4 9.5 44.0 0.0 212.1 233.0 3.5 SA-105_ UL
F157 9999 914.4 9.5 44.0 0.0 212.1 233.0 3.5 SA-105_ UL
9999 BC99 914.4 9.5 44.0 0.0 212.1 233.0 3.5 SA-672_C65 UL
Bend 914.4 9.5 44.0 0.0 209.9 233.0 3.5 SA234WPB UL

Line 43
69 $035 33.4 4.5 78.5 0.0 0.0 233.0 3.5 SA106B UL
$035 121 33.4 4.5 78.5 0.0 5.8 233.0 3.5 SA106B UL

Line 46
1673 $036 60.3 3.9 50.8 0.0 0.0 260.0 20.3 SA234WPB UL
$036 1697 60.3 3.9 50.8 0.0 14.0 260.0 20.3 SA234WPB UL
1697 ~380 60.3 3.9 50.8 0.0 11.8 260.0 20.3 SA106B UL
~380 1699 60.3 3.9 50.8 0.0 11.8 260.0 20.3 SA-105_ UL

Line 47
39 $037 60.3 5.5 66.7 0.0 0.0 233.0 3.5 SA106B UL
$037 ~023 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA106B UL
Bend 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA234WPB UL
~023 167 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
165 ~017 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
~017 163 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA106B UL
Bend 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA234WPB UL

Line 48
163 $038 33.4 4.5 78.5 0.0 0.0 233.0 3.5 SA106B UL
$038 183 33.4 4.5 78.5 0.0 5.8 233.0 3.5 SA106B UL

Line 49
33 $039 60.3 5.5 66.7 0.0 0.0 233.0 3.5 SA106B UL
$039 ~024 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA106B UL
Bend 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA234WPB UL
~024 65 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
67 ~025 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA-105_ UL
~025 69 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 123
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Bend 60.3 5.5 66.7 0.0 11.9 233.0 3.5 SA234WPB UL

Line 50
925 A017 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
A017 8953 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
8953 $040 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
$040 907 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA234WPB UL

Line 51
907 909 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
909 915 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
915 917 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
917 919 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
919 ~134 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
~134 N14 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL

Line 52
907 905 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
905 ~135 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~135 895 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
893 ~110 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~110 $041 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA106B UL
$041 855 88.9 5.5 39.8 0.0 0.0 150.0 6.0 SA106B UL

Line 53
911 $042 26.7 3.9 50.8 0.0 0.0 165.0 15.0 SA106B UL
$042 927 26.7 3.9 50.8 0.0 2.4 165.0 15.0 SA106B UL

Line 54
855 ~108 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA234WPB UL
~108 861 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
863 ~133 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~133 871 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
871 875 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
875 881 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
881 883 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
883 885 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
885 ~132 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
~132 N13 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL

Line 55
877 $043 26.7 3.9 50.8 0.0 0.0 165.0 15.0 SA106B UL
$043 949 26.7 3.9 50.8 0.0 2.4 165.0 15.0 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 124
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 56
855 ~697 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA234WPB UL
~697 817 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA-105_ UL
981 ~106 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA-105_ UL
~106 A014 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA234WPB UL
A014 969 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA-105_ UL
967 ~710 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA-105_ UL
~710 BC05 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 150.0 6.0 SA234WPB UL

Line 57
873 $044 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA234WPB UL
$044 8951 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
8951 A016 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
A016 947 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL

Line 58
913 $045 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL
$045 933 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL

Line 59
977 $046 60.3 3.9 50.8 0.0 0.0 150.0 6.0 SA106B UL
$046 A015 60.3 3.9 50.8 0.0 7.3 150.0 6.0 SA106B UL
A015 989 60.3 3.9 50.8 0.0 7.3 150.0 6.0 SA-105_ UL

Line 60
879 $047 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL
$047 955 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL

Line 61
N16 A020 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL
A020 775 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
775 773 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
773 771 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
771 ~142 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~142 767 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
765 ~143 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~143 ~145 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~145 757 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
755 ~737 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~737 749 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
749 $048 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
$048 679 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 125
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 62
769 $049 26.7 3.9 50.8 0.0 0.0 165.0 15.0 SA106B UL
$049 785 26.7 3.9 50.8 0.0 2.4 165.0 15.0 SA106B UL

Line 63
763 $050 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL
$050 779 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL

Line 64
679 677 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
677 647 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
647 645 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
645 643 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
643 639 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
639 637 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
637 9552 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
9552 ~167 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~167 9353 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
9355 ~168 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~168 ~177 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~177 617 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
615 ~178 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~178 611 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
611 609 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
609 607 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
607 A022 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
A022 605 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL
603 A025 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL
A025 601 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
601 599 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
599 597 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
597 595 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL

Line 65
649 $051 26.7 3.9 50.8 0.0 0.0 165.0 15.0 SA106B UL
$051 743 26.7 3.9 50.8 0.0 2.4 165.0 15.0 SA106B UL

Line 66
679 681 88.9 5.5 39.8 0.0 21.8 165.0 15.0 SA234WPB UL
681 ~736 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 126
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

~736 689 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
691 ~141 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~141 ~137 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~137 699 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
701 ~136 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~136 705 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
705 707 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
707 709 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
709 A018 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA234WPB UL
A018 N15 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL

Line 67
697 $052 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL
$052 791 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL

Line 68
S165 $053 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL
$053 ~187 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL
Bend 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA-105_ UL
~187 719 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA-105_ UL
717 ~188 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA-105_ UL
~188 $054 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL
Bend 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA-105_ UL
$054 S164 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL

Line 69
S164 ~194 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~194 585 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
583 ~738 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~738 577 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
577 $055 88.9 5.5 39.8 0.0 25.3 165.0 15.0 SA234WPB UL
$055 451 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA234WPB UL

Line 70
451 453 168.3 7.1 33.6 0.0 69.2 165.0 15.0 SA234WPB UL
453 ~263 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA234WPB UL
~263 493 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA-105_ UL
499 A048 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA-105_ UL
A048 501 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA234WPB UL
501 $056 168.3 7.1 33.6 0.0 63.7 165.0 15.0 SA234WPB UL
$056 503 168.3 7.1 33.6 0.0 0.0 165.0 15.0 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 127
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 71
503 803 168.3 7.1 33.6 0.0 63.7 165.0 15.0 SA234WPB UL
803 A067 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
A067 7881 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL
7879 A068 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL
A068 7877 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
7877 7875 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
7875 7873 219.1 8.2 30.8 0.0 77.2 165.0 15.0 SA234WPB UL
7873 ~700 219.1 7.0 33.8 0.0 72.1 165.0 15.0 SA106B UL
Bend 219.1 7.0 33.8 0.0 72.1 165.0 15.0 SA234WPB UL
~700 ~701 219.1 7.0 33.8 0.0 72.1 165.0 15.0 SA-105_ UL
~701 ~745 219.1 7.0 33.8 0.0 72.1 165.0 15.0 SA106B UL
Bend 219.1 7.0 33.8 0.0 72.1 165.0 15.0 SA234WPB UL
~745 N4 219.1 7.0 33.8 0.0 72.1 165.0 15.0 SA-105_ UL
N4 ~699 219.1 12.7 0.0 0.0 64.5 165.0 0.0 SA-105_ UL
~699 9435 219.1 12.7 0.0 0.0 64.5 165.0 0.0 SA-516_70 UL
9439 9445 2340.0 20.0 0.0 0.0 6270.0 165.0 0.0 SA-516_70 UL

Line 72
7819 $057 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA106B UL
$057 7817 88.9 5.5 39.8 0.0 18.0 165.0 15.0 SA106B UL
7817 7809 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL
7809 7805 88.9 5.5 39.8 0.0 22.2 165.0 24.5 SA234WPB UL
7805 ~606 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL
~606 7803 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA-105_ UL
7801 ~746 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA-105_ UL
~746 7791 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL
7791 7789 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL
7789 7787 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA234WPB UL
7787 A071 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA234WPB UL
A071 7785 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA-105_ UL
7783 A072 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA-105_ UL
A072 7781 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA234WPB UL
7781 7779 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA234WPB UL
7779 7777 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL
7777 ~747 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL
~747 7829 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA-105_ UL
7831 ~608 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA-105_ UL
~608 7833 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL
7833 7837 88.9 5.5 39.8 0.0 22.2 165.0 24.5 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 128
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

7837 BC15 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 24.5 SA234WPB UL

Line 73
613 $058 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL
$058 735 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL

Line 74
S164 ~180 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
~180 591 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
593 ~179 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~179 595 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL

Line 75
451 449 168.3 7.1 33.6 0.0 69.2 165.0 15.0 SA234WPB UL
449 437 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA234WPB UL
437 405 168.3 7.1 33.6 0.0 69.2 165.0 15.0 SA234WPB UL
405 407 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA234WPB UL
407 409 168.3 7.1 33.6 0.0 44.3 165.0 15.0 SA234WPB UL
409 411 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
411 A029 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
A029 9295 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA-105_ UL
9293 ~237 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA-105_ UL
~237 ~696 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
~696 9291 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA-105_ UL
1125 A028 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA-105_ UL
A028 A027 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
A027 1113 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA-105_ UL
1111 ~236 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA-105_ UL
~236 BC06 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL

Line 76
503 805 168.3 7.1 33.6 0.0 63.7 165.0 15.0 SA234WPB UL
805 3955 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
3955 3951 168.3 7.1 33.6 0.0 72.9 165.0 15.0 SA234WPB UL
3951 A065 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
A065 3949 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL
3947 A064 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL
A064 3945 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
3945 3943 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
3943 3941 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA234WPB UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 129
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

3941 A063 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA234WPB UL
A063 3939 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA-105_ UL
3937 A062 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA-105_ UL
A062 3935 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA234WPB UL
3935 3933 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA234WPB UL
3933 3931 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
3931 ~744 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
~744 3919 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL
3917 ~572 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL
~572 3915 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
3915 3911 168.3 7.1 33.6 0.0 72.9 165.0 15.0 SA234WPB UL
3911 ~576 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
~576 ~577 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL
~577 ~560 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA106B UL
Bend 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA234WPB UL
~560 BC02 168.3 7.1 33.6 0.0 49.8 165.0 15.0 SA-105_ UL

Line 77
SE41 $059 114.3 6.0 37.4 0.0 0.0 165.0 15.0 SA234WPB UL
$059 4009 114.3 6.0 37.4 0.0 40.4 165.0 15.0 SA234WPB UL
4009 ~573 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA234WPB UL
~573 4005 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA-105_ UL
4003 A066 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA-105_ UL
A066 4001 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 27.3 165.0 15.0 SA234WPB UL
4001 $060 114.3 6.0 37.4 0.0 40.4 165.0 15.0 SA234WPB UL
$060 3913 114.3 6.0 37.4 0.0 0.0 165.0 15.0 SA234WPB UL

Line 78
7807 $061 60.3 3.9 50.8 0.0 0.0 165.0 24.5 SA234WPB UL
$061 7859 60.3 3.9 50.8 0.0 12.2 165.0 24.5 SA234WPB UL
7859 ~611 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA106B UL
~611 7857 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA-105_ UL
7855 9079 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA-105_ UL
9079 7853 60.3 3.9 50.8 0.0 10.1 165.0 24.5 SA106B UL
7853 $062 60.3 3.9 50.8 0.0 12.2 165.0 24.5 SA234WPB UL
$062 7835 60.3 3.9 50.8 0.0 0.0 165.0 24.5 SA234WPB UL

Line 79
703 $063 26.7 3.9 50.8 0.0 0.0 165.0 15.0 SA106B UL
$063 797 26.7 3.9 50.8 0.0 2.4 165.0 15.0 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 130
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Line 80
595 $064 33.4 4.5 45.5 0.0 0.0 165.0 15.0 SA106B UL
$064 727 33.4 4.5 45.5 0.0 3.6 165.0 15.0 SA106B UL

Line 81
435 $065 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA234WPB UL
$065 505 88.9 5.5 39.8 0.0 25.3 165.0 15.0 SA234WPB UL
505 ~089 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~089 9283 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
9279 ~088 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~088 515 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
515 517 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
517 519 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
519 523 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
523 525 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
525 527 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
527 ~091 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~091 539 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
543 A013 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
A013 545 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
545 549 88.9 5.5 39.8 0.0 19.6 165.0 15.0 SA234WPB UL
549 A012 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
A012 555 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
557 ~085 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~085 BC08 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL

Line 82
385 $066 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA234WPB UL
$066 383 88.9 5.5 39.8 0.0 25.3 165.0 15.0 SA234WPB UL
383 ~735 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~735 377 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
375 ~075 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~075 ~078 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~078 9289 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
9285 ~077 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~077 365 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
365 363 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
363 361 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
361 357 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 131
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Bend 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL

357 355 114.3 6.0 37.4 0.0 23.1 165.0 15.0 SA234WPB UL
355 353 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
353 ~074 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~074 341 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
337 A010 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
A010 335 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
335 331 88.9 5.5 39.8 0.0 19.6 165.0 15.0 SA234WPB UL
331 ~707 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL
~707 9483 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
323 ~073 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA-105_ UL
~073 BC07 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 15.3 165.0 15.0 SA234WPB UL

Line 83
1121 $067 60.3 3.9 50.8 0.0 0.0 165.0 15.0 SA106B UL
$067 A030 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
A030 1135 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL

Line 84
3957 $068 88.9 5.5 39.8 0.0 0.0 165.0 15.0 SA106B UL
$068 ~589 88.9 5.5 39.8 0.0 18.0 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 15.0 SA234WPB UL
~589 ~588 88.9 5.5 39.8 0.0 18.0 165.0 15.0 SA-105_ UL
~588 SE47 88.9 5.5 39.8 0.0 18.0 165.0 15.0 SA106B UL
Bend 88.9 5.5 39.8 0.0 18.0 165.0 15.0 SA234WPB UL

Line 85
3445 $069 60.3 3.9 50.8 0.0 0.0 165.0 15.0 SA106B UL
$069 ~750 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA234WPB UL
~750 3427 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
3425 A079 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
A079 3423 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA234WPB UL
3423 3447 60.3 3.9 50.8 0.0 16.1 165.0 15.0 SA234WPB UL
3447 A080 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA234WPB UL
A080 3449 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
3451 ~671 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
~671 ~672 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA234WPB UL
~672 3459 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
3461 ~751 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
~751 3469 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA234WPB UL
3469 $070 60.3 3.9 50.8 0.0 10.1 183.0 13.0 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 132
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

$070 3471 60.3 3.9 50.8 0.0 0.0 183.0 13.0 SA106B UL

Line 86
3421 $071 60.3 3.9 50.8 0.0 0.0 165.0 15.0 SA234WPB UL
$071 263 60.3 3.9 50.8 0.0 16.1 165.0 15.0 SA234WPB UL
263 261 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA106B UL
261 $072 60.3 3.9 50.8 0.0 15.4 317.0 37.2 SA234WPB UL
$072 249 60.3 3.9 50.8 0.0 0.0 317.0 37.2 SA234WPB UL

Line 87
BC03 ~651 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA106B UL
Bend 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA234WPB UL
~651 ~650 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA-105_ UL
~650 3539 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA106B UL
Bend 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA234WPB UL
3539 $073 219.1 7.0 33.8 0.0 79.1 183.0 13.0 SA234WPB UL
$073 3541 219.1 7.0 33.8 0.0 0.0 183.0 13.0 SA234WPB UL

Line 88
249 251 60.3 3.9 50.8 0.0 15.4 317.0 37.2 SA234WPB UL
251 A090 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA106B UL
A090 9011 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA-105_ UL
3389 ~673 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
~673 ~677 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA234WPB UL
~677 3395 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
3397 ~752 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA-105_ UL
~752 3407 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA106B UL
Bend 60.3 3.9 50.8 0.0 10.1 165.0 15.0 SA234WPB UL
3407 $074 60.3 3.9 50.8 0.0 10.1 150.0 8.0 SA106B UL
$074 3409 60.3 3.9 50.8 0.0 0.0 150.0 8.0 SA106B UL

Line 89
BC01 ~635 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA-105_ UL
~635 ~634 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA234WPB UL
~634 ~633 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA-105_ UL
~633 ~621 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA234WPB UL
~621 3597 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA-105_ UL
3595 ~749 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA-105_ UL
~749 3583 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA234WPB UL
3583 3581 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA234WPB UL
3581 3579 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA234WPB UL
3579 A076 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA106B UL
Bend 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA234WPB UL
A076 3577 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA-105_ UL
3575 A077 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA-105_ UL
A077 3573 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 133
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

Bend 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA234WPB UL

3573 3571 114.3 6.0 37.4 0.0 27.3 150.0 8.0 SA234WPB UL
3571 3569 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA234WPB UL
3569 ~748 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA234WPB UL
~748 3559 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA-105_ UL
3557 ~625 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA-105_ UL
~625 3551 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 150.0 8.0 SA234WPB UL
3551 3655 273.0 7.8 31.7 0.0 113.9 183.0 13.0 SA234WPB UL
3655 3667 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA234WPB UL
3667 3669 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA234WPB UL
3669 3671 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA234WPB UL
3671 A060 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA106B UL
Bend 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA234WPB UL
A060 3673 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA-105_ UL
3675 A058 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA-105_ UL
A058 3677 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA106B UL
Bend 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA234WPB UL
3677 3679 219.1 7.0 33.8 0.0 72.1 183.0 13.0 SA234WPB UL
3679 3681 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA234WPB UL
3681 1105 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA234WPB UL
1105 1107 273.0 7.8 31.7 0.0 147.1 183.0 14.4 SA234WPB UL
1107 ~556 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA106B UL
Bend 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA234WPB UL
~556 N17 273.0 7.8 31.7 0.0 104.3 183.0 13.0 SA-105_ UL
N17 ~698 273.0 15.1 0.0 0.0 95.8 185.0 0.0 SA-105_ UL
~698 9419 273.0 15.1 0.0 0.0 95.8 185.0 0.0 SA-516_70 UL
9411 9417 2950.0 25.0 0.0 0.0 8725.0 185.0 0.0 SA-516_70 UL

Line 92
547 $075 60.3 3.9 50.8 0.0 0.0 165.0 15.0 SA234WPB UL
$075 571 60.3 3.9 50.8 0.0 9.3 165.0 15.0 SA234WPB UL
571 8945 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
8945 573 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL

Line 93
333 $076 60.3 3.9 50.8 0.0 0.0 165.0 15.0 SA234WPB UL
$076 ~708 60.3 3.9 50.8 0.0 9.3 165.0 15.0 SA234WPB UL
~708 387 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA106B UL
387 8939 60.3 3.9 50.8 0.0 7.3 165.0 15.0 SA-105_ UL

Line 94
249 247 60.3 3.9 50.8 0.0 15.4 317.0 37.2 SA234WPB UL
247 A091 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA106B UL
Bend 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA234WPB UL
A091 9487 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA-105_ UL
239 ~709 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA-105_ UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 134
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

PIPE DIMENSIONS TOLERANCES MASSES CALCULATION-CONDITIONS MATERIAL

------------------------------------------------------------------------
VPKT BPKT DA S TOLI TOLA SM TEMP PRESS MATERIAL FILE
(mm) (mm) (%) (%) (kg/m) (°C) (bar)

~709 ~065 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA106B UL
Bend 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA234WPB UL
~065 271 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA-105_ UL
273 ~066 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA-105_ UL
~066 9429 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA106B UL
Bend 60.3 3.9 50.8 0.0 9.4 317.0 37.2 SA234WPB UL
9429 $077 60.3 3.9 50.8 0.0 13.2 317.0 37.2 SA234WPB UL
$077 281 60.3 3.9 50.8 0.0 0.0 317.0 37.2 SA234WPB UL

Line 95
235 $078 33.4 3.4 56.9 0.0 0.0 317.0 37.2 SA106B UL
$078 255 33.4 3.4 56.9 0.0 4.5 317.0 37.2 SA106B UL

Line 96
1091 $079 114.3 6.0 37.4 0.0 0.0 183.0 14.4 SA234WPB UL
$079 1089 114.3 6.0 37.4 0.0 41.2 183.0 14.4 SA234WPB UL
1089 ~497 114.3 6.0 37.4 0.0 28.3 183.0 14.4 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 183.0 14.4 SA234WPB UL
~497 1087 114.3 6.0 37.4 0.0 28.3 183.0 14.4 SA-105_ UL
1085 ~741 114.3 6.0 37.4 0.0 28.3 183.0 14.4 SA-105_ UL
~741 ~281 114.3 6.0 37.4 0.0 28.3 183.0 14.4 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 183.0 14.4 SA234WPB UL
~281 1067 114.3 6.0 37.4 0.0 28.3 183.0 14.4 SA-105_ UL
1065 ~223 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA-105_ UL
~223 ~201 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA234WPB UL
~201 9275 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA-105_ UL
9277 ~200 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA-105_ UL
~200 1099 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA234WPB UL
1099 283 114.3 6.0 37.4 0.0 34.9 317.0 37.2 SA234WPB UL
283 ~197 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA234WPB UL
~197 289 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA-105_ UL
293 8971 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA-105_ UL
8971 295 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA234WPB UL
295 299 114.3 6.0 37.4 0.0 34.9 317.0 37.2 SA234WPB UL
299 8969 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA234WPB UL
8969 305 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA-105_ UL
307 ~196 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA-105_ UL
~196 BC04 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA106B UL
Bend 114.3 6.0 37.4 0.0 28.3 317.0 37.2 SA234WPB UL

Line 99
297 $080 60.3 3.9 50.8 0.0 0.0 317.0 37.2 SA234WPB UL
$080 315 60.3 3.9 50.8 0.0 13.2 317.0 37.2 SA234WPB UL
315 ~202 60.3 3.9 50.8 0.0 10.9 317.0 37.2 SA106B UL
~202 317 60.3 3.9 50.8 0.0 10.9 317.0 37.2 SA-105_ UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 135
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

STRUCTUAL STEEL SECTIONS AND USER DEFINED SECTIONS

--------------------------------------------------
VPKT BPKT Profile ORIENTATION NO. A1 SM MATERIAL FILE
(mm)(kg/m)

Line 1
1775 1773 R51.6X13.6 Zp in +Za 1 0.0 135.84 SA106B UL

Line 2
1729 1727 R138.4X18.1 Zp in +Za 1 0.0 200.79 SA106B UL

Line 3
1745 1747 R138.4X18.1 Yp in +Ya 1 0.0 168.37 SA106B UL
1305 1307 R138.4X18.1 Yp in +Ya 1 0.0 262.86 SA106B UL
1319 1321 R110.8X16.5 Zp in +Za 1 0.0 166.55 SA106B UL
1333 1335 R138.4X18.1 Yp in +Ya 1 0.0 262.86 SA106B UL

Line 4
1763 1765 R51.6X13.6 Yp in +Ya 1 0.0 135.84 SA106B UL

Line 5
1183 1181 R138.4X18.1 Yp in +Ya 1 0.0 168.37 SA106B UL
1165 1163 R138.4X18.1 Zp in +Za 1 0.0 200.79 SA106B UL

Line 6
1211 1213 R51.6X13.6 Zp in +Za 1 0.0 135.84 SA106B UL

Line 7
1565 1567 R51.6X13.6 Yp in +Ya 1 0.0 135.84 SA106B UL

Line 8
1201 1203 R51.6X13.6 Yp in +Ya 1 0.0 135.84 SA106B UL

Line 9
1707 1705 R42.3X11.7 Yp in +Ya 1 0.0 87.06 SA106B UL

Line 10
1441 1443 R138.4X18.1 Yp in +Ya 1 0.0 262.86 SA106B UL
1455 1457 R110.8X16.5 Zp in +Za 1 0.0 166.55 SA106B UL
1467 1469 R138.4X18.1 Yp in +Ya 1 0.0 262.86 SA106B UL

Line 11
1551 1553 R51.6X13.6 Yp in +Ya 1 0.0 201.46 SA106B UL

Line 12
1571 1573 R51.6X13.6 Yp in +Ya 1 0.0 135.84 SA106B UL

Line 13
1143 1141 R42.3X11.7 Yp in +Ya 1 0.0 87.06 SA106B UL

Line 14
1757 1755 R42.3X11.7 Zp in +Za 1 0.0 82.88 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 136
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

STRUCTUAL STEEL SECTIONS AND USER DEFINED SECTIONS

--------------------------------------------------
VPKT BPKT Profile ORIENTATION NO. A1 SM MATERIAL FILE
(mm)(kg/m)

Line 15
1559 1561 R76.0X11.7 Zp in +Za 1 0.0 62.49 SA106B UL

Line 16
A034 S90 _RIGID_ Yp in +Ya 1 0.0 0.00 SA106B UL

Line 19
1821 1825 R247.2X21.1 Zp in +Za 1 0.0 70.12 SA106B UL

Line 20
C043 C041 R196.7X21.3 Zp in +Za 1 0.0 377.17 SA106B UL
C041 C039 R196.7X21.3 Zp in +Za 1 0.0 323.86 SA106B UL
C031 C029 R138.4X18.1 Zp in +Za 1 0.0 235.74 SA106B UL

Line 21
B969 B971 R110.8X16.5 Zp in +Za 1 0.0 177.73 SA106B UL

Line 22
9567 S77 _RIGID_ Yp in +Ya 1 0.0 0.00 SA106B UL

Line 23
1659 1661 R51.6X13.6 Zp in +Za 1 0.0 201.46 SA106B UL

Line 25
1195 1193 R42.3X11.7 Zp in +Za 1 0.0 82.88 SA106B UL

Line 26
237 227 R247.2X21.1 Zp in +Za 1 0.0 70.12 SA106B UL

Line 27
89 87 R76.0X11.7 Zp in +Za 1 0.0 98.51 SA106B UL
93 85 R49.0X11.7 Zp in +Za 1 0.0 98.70 SA106B UL
85 71 R76.0X11.7 Zp in +Za 1 0.0 100.82 SA106B UL

Line 30
127 129 R46.9X10.1 Zp in +Za 1 0.0 68.61 SA106B UL

Line 32
9997 EQ3 _RIGID_ Yp in +Ya 1 0.0 0.00 SA-516_70 UL

Line 33
9998 EQ4 _RIGID_ Yp in +Ya 1 0.0 0.00 SA-516_70 UL

Line 34
9153 D079 R247.2X21.1 Zp in +Za 1 0.0 362.76 SA106B UL
9185 9183 R196.7X21.3 Zp in +Za 1 0.0 460.65 SA106B UL
C965 C967 R247.2X21.1 Yp in +Ya 1 0.0 362.76 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 137
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

STRUCTUAL STEEL SECTIONS AND USER DEFINED SECTIONS

--------------------------------------------------
VPKT BPKT Profile ORIENTATION NO. A1 SM MATERIAL FILE
(mm)(kg/m)

Line 35
D067 9161 R196.7X21.3 Zp in +Za 1 0.0 244.47 SA106B UL

Line 36
9261 9259 _RIGID_ Yp in -Ya 1 0.0 0.00 SA106B UL

Line 38
1693 1695 R76.0X11.7 Zp in +Za 1 0.0 131.41 SA106B UL

Line 39
141 143 R76.0X11.7 Zp in +Za 1 0.0 98.51 SA106B UL
155 157 R49.0X11.7 Zp in +Za 1 0.0 98.70 SA106B UL
157 159 R76.0X11.7 Zp in +Za 1 0.0 100.82 SA106B UL

Line 40
97 51 R76.0X11.7 Zp in +Za 1 0.0 117.57 SA106B UL

Line 41
177 179 R46.9X10.1 Zp in +Za 1 0.0 68.61 SA106B UL

Line 42
F155 F157 R952.5X28.6 Zp in +Za 1 0.0 4430. SA-672_C65 UL

Line 43
121 123 R51.6X13.6 Zp in +Za 1 0.0 68.65 SA106B UL

Line 44
9996 EQ01 _RIGID_ Yp in +Ya 1 0.0 0.00 SA-516_70 UL

Line 45
9995 EQ02 _RIGID_ Yp in +Ya 1 0.0 0.00 SA-516_70 UL

Line 46
1699 1701 R76.0X11.7 Zp in +Za 1 0.0 131.41 SA106B UL

Line 47
167 165 R82.5X16.6 Zp in +Za 1 0.0 117.48 SA106B UL

Line 48
183 185 R51.6X13.6 Zp in +Za 1 0.0 68.65 SA106B UL

Line 49
65 67 R82.5X16.6 Zp in +Za 1 0.0 117.48 SA106B UL

Line 52
895 893 R110.8X16.5 Yp in +Ya 1 0.0 165.56 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 138
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

STRUCTUAL STEEL SECTIONS AND USER DEFINED SECTIONS

--------------------------------------------------
VPKT BPKT Profile ORIENTATION NO. A1 SM MATERIAL FILE
(mm)(kg/m)

Line 53
927 929 R42.3X11.7 Yp in +Ya 1 0.0 83.16 SA106B UL

Line 54
861 863 R110.8X16.5 Yp in +Ya 1 0.0 165.56 SA106B UL

Line 55
949 951 R42.3X11.7 Yp in +Ya 1 0.0 83.16 SA106B UL

Line 56
817 981 R110.8X16.5 Yp in +Ya 1 0.0 173.85 SA106B UL
969 967 R110.8X16.5 Yp in +Ya 1 0.0 165.56 SA106B UL

Line 59
989 991 R76.0X11.7 Zp in +Za 1 0.0 114.32 SA106B UL

Line 61
767 765 R110.8X16.5 Yp in +Ya 1 0.0 116.06 SA106B UL
757 755 R110.8X16.5 Yp in +Ya 1 0.0 165.56 SA106B UL

Line 62
785 787 R42.3X11.7 Zp in +Za 1 0.0 83.16 SA106B UL

Line 63
779 781 R51.6X13.6 Zp in +Za 1 0.0 66.03 SA106B UL

Line 64
9353 9355 R110.8X16.5 Zp in +Za 1 0.0 57.15 SA106B UL
617 615 R110.8X16.5 Zp in +Za 1 0.0 173.85 SA106B UL
605 603 R76.0X11.7 Zp in +Za 1 0.0 192.02 SA106B UL

Line 65
743 745 R42.3X11.7 Zp in +Za 1 0.0 83.17 SA106B UL

Line 66
689 691 R110.8X16.5 Yp in +Ya 1 0.0 165.56 SA106B UL
699 701 R110.8X16.5 Yp in +Ya 1 0.0 116.06 SA106B UL

Line 67
791 793 R51.6X13.6 Zp in +Za 1 0.0 66.03 SA106B UL

Line 68
719 717 R51.6X13.6 Zp in +Za 1 0.0 46.28 SA106B UL

Line 69
585 583 R110.8X16.5 Zp in +Za 1 0.0 116.06 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 139
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

STRUCTUAL STEEL SECTIONS AND USER DEFINED SECTIONS

--------------------------------------------------
VPKT BPKT Profile ORIENTATION NO. A1 SM MATERIAL FILE
(mm)(kg/m)

Line 70
493 499 R196.7X21.3 Yp in +Ya 1 0.0 321.08 SA106B UL

Line 71
7881 7879 R196.7X21.3 Zp in +Za 1 0.0 568.48 SA106B UL
9435 9439 _RIGID_ Yp in +Ya 1 0.0 0.00 SA-516_70 UL

Line 72
7803 7801 R110.8X16.5 Yp in +Ya 1 0.0 130.69 SA106B UL
7785 7783 R76.0X11.7 Zp in +Za 1 0.0 117.57 SA106B UL
7829 7831 R110.8X16.5 Yp in +Ya 1 0.0 132.76 SA106B UL

Line 73
735 737 R51.6X13.6 Yp in +Ya 1 0.0 66.03 SA106B UL

Line 74
591 593 R110.8X16.5 Zp in +Za 1 0.0 173.85 SA106B UL

Line 75
9295 9293 R138.4X18.1 Zp in +Za 1 0.0 59.13 SA106B UL
9291 1127 R138.4X18.1 Yp in +Ya 1 0.0 234.60 SA106B UL
1127 1125 R138.4X18.1 Yp in +Ya 1 0.0 166.64 SA106B UL
1113 1111 R138.4X18.1 Yp in +Ya 1 0.0 217.88 SA106B UL

Line 76
3949 3947 R196.7X21.3 Zp in +Za 1 0.0 327.30 SA106B UL
3939 3937 R138.4X18.1 Zp in +Za 1 0.0 369.81 SA106B UL
3919 3917 R196.7X21.3 Yp in +Ya 1 0.0 327.30 SA106B UL

Line 77
4005 4003 R138.4X18.1 Zp in +Za 1 0.0 188.02 SA106B UL

Line 78
7857 7855 R76.0X11.7 Zp in +Za 1 0.0 81.30 SA106B UL

Line 79
797 799 R42.3X11.7 Zp in +Za 1 0.0 83.16 SA106B UL

Line 80
727 729 R51.6X13.6 Yp in +Ya 1 0.0 66.03 SA106B UL

Line 81
9283 9279 R110.8X16.5 Zp in +Za 1 0.0 47.89 SA106B UL
539 541 R110.8X16.5 Yp in +Ya 1 0.0 177.52 SA106B UL
541 543 R110.8X16.5 Yp in +Ya 1 0.0 116.06 SA106B UL
555 557 R110.8X16.5 Yp in +Ya 1 0.0 165.67 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 140
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

STRUCTUAL STEEL SECTIONS AND USER DEFINED SECTIONS

--------------------------------------------------
VPKT BPKT Profile ORIENTATION NO. A1 SM MATERIAL FILE
(mm)(kg/m)

Line 82
377 375 R110.8X16.5 Zp in +Za 1 0.0 173.85 SA106B UL
9289 9285 R110.8X16.5 Zp in +Za 1 0.0 47.89 SA106B UL
341 339 R110.8X16.5 Yp in +Ya 1 0.0 177.52 SA106B UL
339 337 R110.8X16.5 Yp in +Ya 1 0.0 116.06 SA106B UL
9483 323 R110.8X16.5 Yp in +Ya 1 0.0 165.67 SA106B UL

Line 83
1135 1137 R76.0X11.7 Zp in +Za 1 0.0 114.32 SA106B UL

Line 85
3427 3425 R76.0X11.7 Yp in +Ya 1 0.0 117.55 SA106B UL
3449 3451 R76.0X11.7 Yp in +Ya 1 0.0 111.62 SA106B UL
3459 3461 R76.0X11.7 Yp in +Ya 1 0.0 117.55 SA106B UL

Line 88
9011 3389 R76.0X11.7 Yp in +Ya 1 0.0 117.55 SA106B UL
3395 3397 R76.0X11.7 Yp in +Ya 1 0.0 117.55 SA106B UL

Line 89
3597 3595 R304.2X23.4 Yp in +Ya 1 0.0 647.27 SA106B UL
3577 3575 R138.4X18.1 Zp in +Za 1 0.0 234.64 SA106B UL
3559 3557 R304.2X23.4 Yp in +Ya 1 0.0 647.27 SA106B UL
3673 3675 R247.2X21.1 Zp in +Za 1 0.0 814.28 SA106B UL
9419 9411 _RIGID_ Yp in -Ya 1 0.0 0.00 SA-516_70 UL

Line 90
9441 EQ08 _RIGID_ Yp in -Ya 1 0.0 0.00 SA-516_70 UL

Line 91
9443 EQ07 _RIGID_ Yp in -Ya 1 0.0 0.00 SA-516_70 UL

Line 92
573 575 R76.0X11.7 Zp in +Za 1 0.0 114.32 SA106B UL

Line 93
8939 391 R76.0X11.7 Zp in +Za 1 0.0 114.32 SA106B UL

Line 94
9487 239 R76.0X11.7 Yp in +Ya 1 0.0 128.87 SA106B UL
271 273 R76.0X11.7 Zp in +Za 1 0.0 128.87 SA106B UL

Line 95
255 257 R46.9X10.1 Zp in +Za 1 0.0 133.58 SA106B UL

Line 96
1087 1085 R138.4X18.1 Yp in +Ya 1 0.0 223.76 SA106B UL
1067 1065 R138.4X18.1 Zp in +Za 1 0.0 238.43 SA106B UL
9275 9277 R138.4X18.1 Zp in +Za 1 0.0 64.97 SA106B UL
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 141
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

STRUCTUAL STEEL SECTIONS AND USER DEFINED SECTIONS

--------------------------------------------------
VPKT BPKT Profile ORIENTATION NO. A1 SM MATERIAL FILE
(mm)(kg/m)

289 291 R138.4X18.1 Yp in +Ya 1 0.0 265.29 SA106B UL

291 293 R138.4X18.1 Yp in +Ya 1 0.0 199.61 SA106B UL
305 307 R138.4X18.1 Yp in +Ya 1 0.0 251.05 SA106B UL

Line 97
9413 EQ06 _RIGID_ Yp in +Ya 1 0.0 0.00 SA-516_70 UL

Line 98
9415 EQ05 _RIGID_ Yp in +Ya 1 0.0 0.00 SA-516_70 UL

Line 99
317 319 R76.0X11.7 Zp in +Za 1 0.0 99.35 SA106B UL

SECTION PROPERTIES FOR STRUCT. SECTS. (determined by program)

-------------------------------------
Section Axis I A W1 W2 W3 W4
(cm4) (cm2) (cm3) (cm3) (cm3) (cm3)

1 _RIGID_ G= 0.0 kg/m tan A= 0.000

Xi 1.00E+10 100000. 1.000E7 1.000E7 1.000E7 1.000E7
Yi 1.00E+10 1.0E+10 1.000E7 1.000E7 1.000E7 1.000E7
Zi 1.00E+10 1.0E+10 1.000E7 1.000E7 1.000E7 1.000E7

1 R51.6X13.6 G= 12.7 kg/m tan A= 0.000

Xi 66.12 16.24 25.63 25.63 25.63 25.63
Yi 33.06 8.78 12.81 1.0E+20 -12.81 1.0E+20
Zi 33.06 8.78 1.0E+20 -12.81-1.0E+20 12.81

1 R82.5X16.6 G= 27.0 kg/m tan A= 0.000

Xi 396.80 34.37 96.19 96.19 96.19 96.19
Yi 198.40 17.90 48.10 1.0E+20 -48.10 1.0E+20
Zi 198.40 17.90 1.0E+20 -48.10-1.0E+20 48.10

1 R76.0X11.7 G= 18.6 kg/m tan A= 0.000

Xi 252.38 23.63 66.42 66.42 66.42 66.42
Yi 126.19 12.08 33.21 1.0E+20 -33.21 1.0E+20
Zi 126.19 12.08 1.0E+20 -33.21-1.0E+20 33.21

1 R49.0X11.7 G= 10.8 kg/m tan A= 0.000

Xi 52.38 13.71 21.38 21.38 21.38 21.38
Yi 26.19 7.29 10.69 1.0E+20 -10.69 1.0E+20
Zi 26.19 7.29 1.0E+20 -10.69-1.0E+20 10.69

1 R46.9X10.1 G= 9.2 kg/m tan A= 0.000

Xi 42.51 11.68 18.13 18.13 18.13 18.13
Yi 21.26 6.12 9.06 1.0E+20 -9.06 1.0E+20
Zi 21.26 6.12 1.0E+20 -9.06-1.0E+20 9.06
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 142
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTION PROPERTIES FOR STRUCT. SECTS. (determined by program)

-------------------------------------
Section Axis I A W1 W2 W3 W4
(cm4) (cm2) (cm3) (cm3) (cm3) (cm3)

1 R110.8X16.5 G= 38.4 kg/m tan A= 0.000

Xi 1119.97 48.88 202.16 202.16 202.16 202.16
Yi 559.98 24.93 101.08 1.0E+20 -101.08 1.0E+20
Zi 559.98 24.93 1.0E+20 -101.08-1.0E+20 101.08

1 R42.3X11.7 G= 8.8 kg/m tan A= 0.000

Xi 30.18 11.25 14.27 14.27 14.27 14.27
Yi 15.09 6.15 7.13 1.0E+20 -7.13 1.0E+20
Zi 15.09 6.15 1.0E+20 -7.13-1.0E+20 7.13

1 R138.4X18.1 G= 53.7 kg/m tan A= 0.000

Xi 2530.97 68.41 365.75 365.75 365.75 365.75
Yi 1265.48 34.72 182.87 1.0E+20 -182.87 1.0E+20
Zi 1265.48 34.72 1.0E+20 -182.87-1.0E+20 182.87

1 R247.2X21.1 G= 117.7 kg/m tan A= 0.000

Xi 19321.46 149.88 1563.22 1563.22 1563.22 1563.22
Yi 9660.73 75.37 781.61 1.0E+20 -781.61 1.0E+20
Zi 9660.73 75.37 1.0E+20 -781.61-1.0E+20 781.61

1 R196.7X21.3 G= 92.1 kg/m tan A= 0.000

Xi 9160.43 117.37 931.41 931.41 931.41 931.41
Yi 4580.22 59.26 465.71 1.0E+20 -465.71 1.0E+20
Zi 4580.22 59.26 1.0E+20 -465.71-1.0E+20 465.71

1 R304.2X23.4 G= 162.0 kg/m tan A= 0.000

Xi 40973.46 206.43 2693.85 2693.85 2693.85 2693.85
Yi 20486.73 103.69 1346.93 1.0E+20-1346.93 1.0E+20
Zi 20486.73 103.69 1.0E+20-1346.93-1.0E+20 1346.93

1 R952.5X28.6 G= 651.6 kg/m tan A= 0.000

Xi 1773156. 830.12 37231.6 37231.6 37231.6 37231.6
Yi 886578.1 415.33 18615.8 1.0E+20-18615.8 1.0E+20
Zi 886578.1 415.33 1.0E+20-18615.8-1.0E+20 18615.8
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 143
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

LOAD CASE INPUTS FOR STRUCTURE CALCULATION

-----------------------------------------

To calculate : 1 load case

L O A D C A S E Operation
---------------------------------

From the system inputs(ET-data) the

following general load inputs apply for this load case:

Thermal expansion ATDT

Axial expansion due to pressure PB
Primary stress due to pressure PB

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

Line 1
N8 A117 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
A117 1787 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1787 9459 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
9459 $000 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
$000 1735 SA106B 223.0 15.0 stiff 2.68 15.00 .300

Line 2
1735 ~307 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
~307 1729 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1729 1727 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1727 ~306 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
~306 1713 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1713 1717 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1717 A035 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
A035 N7 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 144
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

Line 3
1735 9235 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
9235 1745 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1745 1747 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1747 ~316 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
~316 1229 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1229 1235 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1235 1299 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1299 1303 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1303 ~347 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
~347 1305 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1305 1307 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1307 ~348 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
~348 1313 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1313 1317 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1317 A032 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
A032 1319 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1319 1321 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1321 A033 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
A033 1323 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1323 1327 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1327 ~346 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
~346 1333 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1333 1335 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1335 ~358 SA-105_ 201.0 15.0 191.2 2.37 10.50 .300
~358 1339 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1339 1343 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1343 1433 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1433 $001 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
$001 1435 SA234WPB 201.0 15.0 stiff 2.37 10.50 .300

Line 4
1733 $002 SA106B 223.0 15.0 stiff 2.68 15.00 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 145
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

$002 1765 SA106B 223.0 15.0 190.1 2.68 15.00 .300

Line 5
1187 $003 SA234WPB 223.0 15.0 stiff 2.68 15.00 .300
$003 1185 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1185 ~300 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
~300 1183 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1183 1181 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1181 9227 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
9227 ~291 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
~291 1165 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
1165 1163 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1163 ~290 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
~290 1149 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1149 1153 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
1153 A036 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
A036 N9 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300

Line 6
1171 $004 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$004 9457 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
9457 356 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
356 A116 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
A116 N10 SA-105_ 223.0 15.0 189.6 2.68 15.00 .300

Line 7
1311 $005 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$005 1567 SA106B 223.0 15.0 190.1 2.68 15.00 .300

Line 8
1169 $006 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$006 1203 SA106B 223.0 15.0 190.1 2.68 15.00 .300

Line 9
1709 $007 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$007 1705 SA106B 223.0 15.0 190.1 2.68 15.00 .300

Line 10
1301 $008 SA234WPB 223.0 15.0 stiff 2.68 15.00 .300
$008 1437 SA234WPB 223.0 15.0 190.1 2.68 15.00 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 146
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

1437 ~425 SA106B 223.0 15.0 190.1 2.68 12.90 .300

Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
~425 1441 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
1441 1443 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1443 ~426 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
~426 1449 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1449 1453 SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1453 A040 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
A040 1455 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
1455 1457 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1457 A041 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
A041 1459 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1459 1463 SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1463 ~427 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
~427 1467 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
1467 1469 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1469 ~428 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
~428 1529 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1529 1533 SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1533 1543 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1543 1547 SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1547 A083 SA106B 223.0 15.0 190.1 2.68 12.90 .300
Bend SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
A083 N5 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
N5 ~685 SA-105_ 223.0 15.0 189.6 2.68 0.00 .300
~685 $009 SA106B 223.0 15.0 190.1 2.68 0.00 .300
$009 9129 SA106B 223.0 15.0 stiff 2.68 0.00 .300

Line 11
1447 $010 SA106B 223.0 15.0 stiff 2.68 12.90 .300
$010 1553 SA106B 223.0 15.0 190.1 2.68 12.90 .300

Line 12
1329 $011 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$011 1573 SA106B 223.0 15.0 190.1 2.68 15.00 .300

Line 13
1145 $012 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$012 1141 SA106B 223.0 15.0 190.1 2.68 15.00 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 147
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

Line 14
1731 $013 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$013 $014 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
$014 1725 SA106B 223.0 15.0 stiff 2.68 15.00 .300

Line 15
1531 $015 SA234WPB 223.0 15.0 stiff 2.68 12.90 .300
$015 1557 SA234WPB 223.0 15.0 190.1 2.68 12.90 .300
1557 A042 SA106B 223.0 15.0 190.1 2.68 12.90 .300
A042 1559 SA-105_ 223.0 15.0 189.6 2.68 12.90 .300
1559 1561 SA106B 223.0 15.0 190.1 2.68 12.90 .300

Line 16
A034 S90 SA106B 223.0 15.0 190.1 2.68 0.00 .300

Line 17
9129 9127 SA-516_70 223.0 15.0 191.0 2.68 0.00 .300

Line 18
9129 9135 SA-516_70 223.0 15.0 191.0 2.68 0.00 .300

Line 19
9125 $016 SA106B 223.0 15.0 stiff 2.68 0.00 .300
$016 ~684 SA106B 223.0 15.0 190.1 2.68 0.00 .300
~684 N1 SA-105_ 223.0 15.0 189.6 2.68 0.00 .300
N1 ~471 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
~471 ~478 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
~478 ~740 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
~740 ~742 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
~742 1821 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
1821 1825 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
1825 ~498 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
~498 $017 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
$017 C943 SA106B 148.0 15.0 stiff 1.65 5.80 .300

Line 20
C943 C941 SA106B 148.0 15.0 195.2 1.65 5.80 .300
C941 C045 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
C045 A089 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
A089 C043 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
C043 C039 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 148
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

C039 A088 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300

A088 C037 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
C037 C033 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
C033 9031 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
9031 C031 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
C031 C029 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
C029 9029 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
9029 C027 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
C027 9199 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
9199 ~517 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
~517 ~518 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
~518 ~519 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
~519 ~520 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
~520 C005 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
C005 $018 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
$018 B929 SA234WPB 125.0 15.0 stiff 1.35 14.60 .300

Line 21
9197 B927 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
B927 B935 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
B935 ~524 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
~524 ~523 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
~523 ~522 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
~522 ~521 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
~521 B945 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
B945 B949 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
B949 B963 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
B963 B967 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
B967 A050 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
A050 B969 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
B969 B971 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
B971 A051 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300
A051 B973 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 149
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

B973 B977 SA234WPB 125.0 15.0 196.6 1.35 14.60 .300

B977 A052 SA106B 125.0 15.0 196.6 1.35 14.60 .300
Bend SA234WPB 125.0 15.0 196.6 1.35 14.60 .300
A052 SE52 SA-105_ 125.0 15.0 195.2 1.35 14.60 .300

Line 22
9137 $019 SA106B 223.0 15.0 stiff 2.68 0.00 .300
$019 ~686 SA106B 223.0 15.0 190.1 2.68 0.00 .300
~686 N6 SA-105_ 223.0 15.0 189.6 2.68 0.00 .300
N6 ~739 SA-105_ 201.0 15.0 191.2 2.37 10.50 .300
~739 1647 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1647 1643 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1643 9567 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
9567 S77 SA106B 201.0 15.0 191.2 2.37 0.00 .300

Line 23
1641 $020 SA106B 201.0 15.0 stiff 2.37 10.50 .300
$020 1661 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA-105_ 201.0 15.0 191.2 2.37 10.50 .300

Line 24
9567 1577 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1577 $021 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
$021 1341 SA234WPB 201.0 15.0 stiff 2.37 10.50 .300

Line 25
1167 $022 SA106B 223.0 15.0 stiff 2.68 15.00 .300
$022 $023 SA106B 223.0 15.0 190.1 2.68 15.00 .300
Bend SA-105_ 223.0 15.0 189.6 2.68 15.00 .300
$023 1161 SA106B 223.0 15.0 stiff 2.68 15.00 .300

Line 26
9131 $024 SA106B 223.0 15.0 stiff 2.68 0.00 .300
$024 ~683 SA106B 223.0 15.0 190.1 2.68 0.00 .300
~683 N2 SA-105_ 223.0 15.0 189.6 2.68 0.00 .300
N2 ~678 SA-105_ 154.0 15.0 193.5 1.73 4.70 .300
~678 ~491 SA106B 154.0 15.0 194.7 1.73 4.70 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 4.70 .300
~491 ~488 SA-105_ 154.0 15.0 193.5 1.73 4.70 .300
~488 ~496 SA106B 154.0 15.0 194.7 1.73 4.70 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 4.70 .300
~496 237 SA-105_ 154.0 15.0 193.5 1.73 4.70 .300
237 227 SA106B 154.0 15.0 194.7 1.73 4.70 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 4.70 .300
227 ~679 SA-105_ 154.0 15.0 193.5 1.73 4.70 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 150
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

~679 ~681 SA106B 154.0 15.0 194.7 1.73 4.70 .300

Bend SA234WPB 154.0 15.0 194.7 1.73 4.70 .300
~681 N3 SA-105_ 154.0 15.0 193.5 1.73 4.70 .300
N3 ~680 SA-105_ 214.0 15.0 190.3 2.55 0.00 .300
~680 $025 SA-333_6 214.0 15.0 191.6 2.55 0.00 .300
$025 9111 SA-333_6 214.0 15.0 stiff 2.55 0.00 .300

Line 27
205 $026 SA106B 154.0 15.0 stiff 1.73 4.70 .300
$026 117 SA106B 154.0 15.0 194.7 1.73 4.70 .300
117 103 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
103 99 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
99 ~052 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
~052 89 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
89 87 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
87 ~053 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
~053 9139 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9139 77 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
77 A115 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
A115 93 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
93 71 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
71 ~018 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
~018 69 SA106B 154.0 15.0 194.7 1.73 0.20 .300

Line 28
9111 9119 SA-516_70 214.0 15.0 191.6 2.55 0.00 .300

Line 29
9111 9121 SA-516_70 214.0 15.0 191.6 2.55 0.00 .300

Line 30
95 $027 SA106B 148.0 15.0 stiff 1.65 5.80 .300
$027 129 SA106B 148.0 15.0 195.2 1.65 5.80 .300

Line 31
9123 $028 SA-333_6 214.0 15.0 stiff 2.55 0.00 .300
$028 ~682 SA-333_6 214.0 15.0 191.6 2.55 0.00 .300
~682 9113 SA-105_ 214.0 15.0 190.3 2.55 0.00 .300

Line 32
9997 EQ3 SA-516_70 223.0 15.0 191.0 2.68 0.00 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 151
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

Line 33
9998 EQ4 SA-516_70 223.0 15.0 191.0 2.68 0.00 .300

Line 34
C943 C949 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
C949 9149 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9149 A084 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
A084 9153 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
9153 D079 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
D079 A053 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
A053 C955 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
C955 9177 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9177 A086 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
A086 9185 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
9185 9183 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9183 A087 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
A087 9187 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9187 9163 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9163 ~743 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
~743 C965 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
C965 C967 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
C967 A057 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
A057 C969 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
C969 C973 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
C973 9147 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300

Line 35
C951 $029 SA234WPB 148.0 15.0 stiff 1.65 5.80 .300
$029 D059 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
D059 ~535 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
~535 D067 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
D067 9161 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9161 ~753 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
~753 D075 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 152
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

D075 $030 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300

$030 C971 SA234WPB 148.0 15.0 stiff 1.65 5.80 .300

Line 36
1435 1667 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1667 1671 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1671 8993 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
8993 A037 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
A037 ~694 SA-105_ 201.0 15.0 191.2 2.37 10.50 .300
~694 9261 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
9261 9259 SA106B 201.0 15.0 191.2 2.37 0.00 .300
9259 ~695 SA106B 201.0 15.0 191.2 2.37 10.50 .300
~695 A038 SA-105_ 201.0 15.0 191.2 2.37 10.50 .300
A038 8995 SA106B 201.0 15.0 191.2 2.37 10.50 .300
8995 1685 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300

Line 37
1435 1679 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1679 1683 SA106B 201.0 15.0 191.2 2.37 10.50 .300
Bend SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1683 1685 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300

Line 38
1685 $031 SA234WPB 201.0 15.0 stiff 2.37 10.50 .300
$031 1691 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300
1691 ~381 SA106B 201.0 15.0 191.2 2.37 10.50 .300
~381 1693 SA-105_ 201.0 15.0 191.2 2.37 10.50 .300
1693 1695 SA106B 201.0 15.0 191.2 2.37 10.50 .300

Line 39
101 $032 SA234WPB 148.0 15.0 stiff 1.65 5.80 .300
$032 133 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
133 135 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
135 137 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
137 ~044 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
~044 141 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
141 143 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
143 ~045 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
~045 9141 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
9141 153 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
153 A114 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 153
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

A114 155 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300

155 159 SA106B 148.0 15.0 195.2 1.65 5.80 .300
Bend SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
159 ~687 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
~687 163 SA106B 154.0 15.0 194.7 1.73 0.20 .300

Line 40
73 $033 SA234WPB 148.0 15.0 stiff 1.65 5.80 .300
$033 75 SA234WPB 148.0 15.0 195.2 1.65 5.80 .300
75 ~048 SA106B 148.0 15.0 195.2 1.65 5.80 .300
~048 97 SA-105_ 148.0 15.0 193.8 1.65 5.80 .300
97 51 SA106B 148.0 15.0 195.2 1.65 5.80 .300
51 ~031 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
~031 ~688 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300
~688 ~689 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
~689 T067 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300

Line 41
145 $034 SA106B 148.0 15.0 stiff 1.65 5.80 .300
$034 179 SA106B 148.0 15.0 195.2 1.65 5.80 .300

Line 42
9427 F133 SA-672_C65 15.0 15.0 203.1 0.00 0.20 .300
Bend SA234WPB 15.0 15.0 203.7 0.00 0.20 .300
F133 F137 SA234WPB 15.0 15.0 203.7 0.00 0.20 .300
F137 ~662 SA-672_C65 15.0 15.0 203.1 0.00 0.20 .300
Bend SA234WPB 15.0 15.0 203.7 0.00 0.20 .300
~662 F155 SA-105_ 15.0 15.0 201.7 0.00 0.20 .300
F155 F157 SA-672_C65 15.0 15.0 203.1 0.00 0.20 .300
Bend SA234WPB 15.0 15.0 203.7 0.00 0.20 .300
F157 9999 SA-105_ 15.0 15.0 201.7 0.00 0.20 .300
9999 BC99 SA-672_C65 15.0 15.0 203.1 0.00 0.20 .300
Bend SA234WPB 15.0 15.0 203.7 0.00 0.20 .300

Line 43
69 $035 SA106B 154.0 15.0 stiff 1.73 0.20 .300
$035 123 SA106B 154.0 15.0 194.7 1.73 0.20 .300

Line 44
9996 EQ01 SA-516_70 214.0 15.0 191.6 2.55 0.00 .300

Line 45
9995 EQ02 SA-516_70 214.0 15.0 191.6 2.55 0.00 .300

Line 46
1673 $036 SA234WPB 201.0 15.0 stiff 2.37 10.50 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 154
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

$036 1697 SA234WPB 201.0 15.0 191.2 2.37 10.50 .300

1697 ~380 SA106B 201.0 15.0 191.2 2.37 10.50 .300
~380 1699 SA-105_ 201.0 15.0 191.2 2.37 10.50 .300
1699 1701 SA106B 201.0 15.0 191.2 2.37 10.50 .300

Line 47
39 $037 SA106B 154.0 15.0 stiff 1.73 0.20 .300
$037 ~023 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300
~023 167 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
167 165 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300
165 ~017 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
~017 163 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300

Line 48
163 $038 SA106B 154.0 15.0 stiff 1.73 0.20 .300
$038 185 SA106B 154.0 15.0 194.7 1.73 0.20 .300

Line 49
33 $039 SA106B 154.0 15.0 stiff 1.73 0.20 .300
$039 ~024 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300
~024 65 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
65 67 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300
67 ~025 SA-105_ 154.0 15.0 193.5 1.73 0.20 .300
~025 69 SA106B 154.0 15.0 194.7 1.73 0.20 .300
Bend SA234WPB 154.0 15.0 194.7 1.73 0.20 .300

Line 50
925 A017 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
A017 8953 SA106B 40.0 15.0 202.1 0.29 1.40 .300
8953 $040 SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
$040 907 SA234WPB 40.0 15.0 stiff 0.29 1.40 .300

Line 51
907 909 SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
909 915 SA106B 40.0 15.0 202.1 0.29 1.40 .300
915 919 SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
919 ~134 SA106B 40.0 15.0 202.1 0.29 1.40 .300
~134 N14 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300

Line 52
907 905 SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
905 ~135 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 155
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

~135 895 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300

895 893 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
893 ~110 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
~110 $041 SA106B 40.0 15.0 202.1 0.29 1.40 .300
$041 855 SA106B 40.0 15.0 stiff 0.29 1.40 .300

Line 53
911 $042 SA106B 40.0 15.0 stiff 0.29 1.40 .300
$042 929 SA106B 40.0 15.0 202.1 0.29 1.40 .300

Line 54
855 ~108 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
~108 861 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
861 863 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
863 ~133 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
~133 871 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
871 875 SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
875 881 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
881 885 SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
885 ~132 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
~132 N13 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300

Line 55
877 $043 SA106B 40.0 15.0 stiff 0.29 1.40 .300
$043 951 SA106B 40.0 15.0 202.1 0.29 1.40 .300

Line 56
855 ~697 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
~697 817 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
817 981 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
981 ~106 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
~106 A014 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
A014 969 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
969 967 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
967 ~710 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
~710 BC05 SA106B 40.0 15.0 202.1 0.29 1.40 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 156
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

Line 57
873 $044 SA234WPB 40.0 15.0 stiff 0.29 1.40 .300
$044 8951 SA234WPB 40.0 15.0 202.1 0.29 1.40 .300
8951 A016 SA106B 40.0 15.0 202.1 0.29 1.40 .300
A016 947 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300

Line 58
913 $045 SA106B 40.0 15.0 stiff 0.29 1.40 .300
$045 933 SA106B 40.0 15.0 202.1 0.29 1.40 .300

Line 59
977 $046 SA106B 40.0 15.0 stiff 0.29 1.40 .300
$046 A015 SA106B 40.0 15.0 202.1 0.29 1.40 .300
A015 989 SA-105_ 40.0 15.0 200.2 0.29 1.40 .300
989 991 SA106B 40.0 15.0 202.1 0.29 1.40 .300

Line 60
879 $047 SA106B 40.0 15.0 stiff 0.29 1.40 .300
$047 955 SA106B 40.0 15.0 202.1 0.29 1.40 .300

Line 61
N16 A020 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
A020 775 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
775 771 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
771 ~142 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
~142 767 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
767 765 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
765 ~143 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~143 ~145 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
~145 757 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
757 755 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
755 ~737 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~737 749 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
749 $048 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
$048 679 SA234WPB 40.0 15.0 stiff 0.29 4.00 .300

Line 62
769 $049 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$049 787 SA106B 40.0 15.0 202.1 0.29 4.00 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 157
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

Line 63
763 $050 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$050 781 SA106B 40.0 15.0 202.1 0.29 4.00 .300

Line 64
679 677 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
677 647 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
647 643 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
643 639 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
639 9552 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
9552 ~167 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
~167 9353 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
9353 9355 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
9355 ~168 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~168 ~177 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
~177 617 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
617 615 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
615 ~178 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~178 611 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
611 607 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
607 A022 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
A022 605 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
605 603 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
603 A025 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
A025 601 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
601 597 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
597 595 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300

Line 65
649 $051 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$051 745 SA106B 40.0 15.0 202.1 0.29 4.00 .300

Line 66
679 681 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
681 ~736 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 158
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

~736 689 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300

689 691 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
691 ~141 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~141 ~137 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
~137 699 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
699 701 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
701 ~136 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~136 705 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
705 709 SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
709 A018 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
A018 N15 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300

Line 67
697 $052 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$052 793 SA106B 40.0 15.0 202.1 0.29 4.00 .300

Line 68
S165 $053 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$053 ~187 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~187 719 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
719 717 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
717 ~188 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~188 $054 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
$054 S164 SA106B 40.0 15.0 stiff 0.29 4.00 .300

Line 69
S164 ~194 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
~194 585 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
585 583 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
583 ~738 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~738 577 SA106B 40.0 15.0 202.1 0.29 4.00 .300
Bend SA234WPB 40.0 15.0 202.1 0.29 4.00 .300
577 $055 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
$055 451 SA234WPB 50.0 15.0 stiff 0.41 1.40 .300

Line 70
451 453 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
453 ~263 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 159
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

~263 493 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300

493 499 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
499 A048 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
A048 501 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
501 $056 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
$056 503 SA234WPB 50.0 15.0 stiff 0.41 1.40 .300

Line 71
503 803 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
803 A067 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
A067 7881 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
7881 7879 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
7879 A068 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
A068 7877 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
7877 7873 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
7873 ~700 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~700 ~701 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~701 ~745 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~745 N4 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
N4 ~699 SA-105_ 60.0 15.0 199.1 0.53 0.00 .300
~699 9445 SA-516_70 60.0 15.0 200.5 0.53 0.00 .300

Line 72
7819 $057 SA106B 60.0 15.0 stiff 0.53 1.40 .300
$057 7817 SA106B 60.0 15.0 200.8 0.53 1.40 .300
7817 7809 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7809 7805 SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7805 ~606 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
~606 7803 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300
7803 7801 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7801 ~746 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300
~746 7791 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7791 7787 SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7787 A071 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
A071 7785 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300
7785 7783 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 160
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

7783 A072 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300

A072 7781 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7781 7777 SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7777 ~747 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
~747 7829 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300
7829 7831 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7831 ~608 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300
~608 7833 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7833 7837 SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7837 BC15 SA106B 41.0 15.0 202.1 0.30 8.40 .300
Bend SA234WPB 41.0 15.0 202.1 0.30 8.40 .300

Line 73
613 $058 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$058 737 SA106B 40.0 15.0 202.1 0.29 4.00 .300

Line 74
S164 ~180 SA106B 40.0 15.0 202.1 0.29 4.00 .300
~180 591 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
591 593 SA106B 40.0 15.0 202.1 0.29 4.00 .300
593 ~179 SA-105_ 40.0 15.0 200.2 0.29 4.00 .300
~179 595 SA106B 40.0 15.0 202.1 0.29 4.00 .300

Line 75
451 449 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
449 437 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
437 405 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
405 407 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
407 411 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
411 A029 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
A029 9295 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
9295 9293 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
9293 ~237 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
~237 ~696 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
~696 9291 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
9291 1125 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
1125 A028 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
A028 A027 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 161
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

A027 1113 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300

1113 1111 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
1111 ~236 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
~236 BC06 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300

Line 76
503 805 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
805 3955 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3955 3951 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3951 A065 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
A065 3949 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
3949 3947 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3947 A064 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
A064 3945 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3945 3941 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3941 A063 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
A063 3939 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
3939 3937 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3937 A062 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
A062 3935 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3935 3931 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3931 ~744 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~744 3919 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
3919 3917 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3917 ~572 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~572 3915 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3915 3911 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3911 ~576 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~576 ~577 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~577 ~560 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~560 BC02 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300

Line 77
SE41 $059 SA234WPB 60.0 15.0 stiff 0.53 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 162
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

$059 4009 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300

4009 ~573 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~573 4005 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
4005 4003 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
4003 A066 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
A066 4001 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
4001 $060 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
$060 3913 SA234WPB 60.0 15.0 stiff 0.53 1.40 .300

Line 78
7807 $061 SA234WPB 41.0 15.0 stiff 0.30 8.40 .300
$061 7859 SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
7859 ~611 SA106B 41.0 15.0 202.1 0.30 8.40 .300
~611 7857 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300
7857 7855 SA106B 41.0 15.0 202.1 0.30 8.40 .300
7855 9079 SA-105_ 41.0 15.0 200.2 0.30 8.40 .300
9079 7853 SA106B 41.0 15.0 202.1 0.30 8.40 .300
7853 $062 SA234WPB 41.0 15.0 202.1 0.30 8.40 .300
$062 7835 SA234WPB 41.0 15.0 stiff 0.30 8.40 .300

Line 79
703 $063 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$063 799 SA106B 40.0 15.0 202.1 0.29 4.00 .300

Line 80
595 $064 SA106B 40.0 15.0 stiff 0.29 4.00 .300
$064 729 SA106B 40.0 15.0 202.1 0.29 4.00 .300

Line 81
435 $065 SA234WPB 50.0 15.0 stiff 0.41 1.40 .300
$065 505 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
505 ~089 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
~089 9283 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
9283 9279 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
9279 ~088 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
~088 515 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
515 519 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
519 523 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
523 527 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
527 ~091 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 163
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

~091 539 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300

539 543 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
543 A013 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
A013 545 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
545 549 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
549 A012 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
A012 555 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
555 557 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
557 ~085 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
~085 BC08 SA106B 50.0 15.0 201.5 0.41 1.40 .300
Bend SA234WPB 50.0 15.0 201.5 0.41 1.40 .300

Line 82
385 $066 SA234WPB 50.0 15.0 stiff 0.41 1.40 .300
$066 383 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300
383 ~735 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
~735 377 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
377 375 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
375 ~075 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
~075 ~078 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
~078 9289 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
9289 9285 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
9285 ~077 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
~077 365 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
365 361 SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
361 357 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
357 353 SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
353 ~074 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
~074 341 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
341 337 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
337 A010 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
A010 335 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
335 331 SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
331 ~707 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 164
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

~707 9483 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300

9483 323 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
323 ~073 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
~073 BC07 SA106B 35.0 15.0 202.5 0.23 1.40 .300
Bend SA234WPB 35.0 15.0 202.5 0.23 1.40 .300

Line 83
1121 $067 SA106B 50.0 15.0 stiff 0.41 1.40 .300
$067 A030 SA106B 50.0 15.0 201.5 0.41 1.40 .300
A030 1135 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
1135 1137 SA106B 50.0 15.0 201.5 0.41 1.40 .300

Line 84
3957 $068 SA106B 60.0 15.0 stiff 0.53 1.40 .300
$068 ~589 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~589 ~588 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~588 SE47 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300

Line 85
3445 $069 SA106B 60.0 15.0 stiff 0.53 1.40 .300
$069 ~750 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~750 3427 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
3427 3425 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3425 A079 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
A079 3423 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3423 3447 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3447 A080 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
A080 3449 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
3449 3451 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3451 ~671 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~671 ~672 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~672 3459 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
3459 3461 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3461 ~751 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~751 3469 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3469 $070 SA106B 65.0 15.0 200.5 0.59 2.50 .300
$070 3471 SA106B 65.0 15.0 stiff 0.59 2.50 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 165
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

Line 86
3421 $071 SA234WPB 60.0 15.0 stiff 0.53 1.40 .300
$071 263 SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
263 261 SA106B 60.0 15.0 200.8 0.53 4.00 .300
261 $072 SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
$072 249 SA234WPB 60.0 15.0 stiff 0.53 4.00 .300

Line 87
BC03 ~651 SA106B 65.0 15.0 200.5 0.59 2.50 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 2.50 .300
~651 ~650 SA-105_ 65.0 15.0 198.8 0.59 2.50 .300
~650 3539 SA106B 65.0 15.0 200.5 0.59 2.50 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 2.50 .300
3539 $073 SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
$073 3541 SA234WPB 65.0 15.0 stiff 0.59 11.90 .300

Line 88
249 251 SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
251 A090 SA106B 60.0 15.0 200.8 0.53 4.00 .300
A090 9011 SA-105_ 60.0 15.0 199.1 0.53 4.00 .300
9011 3389 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3389 ~673 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~673 ~677 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
~677 3395 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
3395 3397 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3397 ~752 SA-105_ 60.0 15.0 199.1 0.53 1.40 .300
~752 3407 SA106B 60.0 15.0 200.8 0.53 1.40 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 1.40 .300
3407 $074 SA106B 70.0 15.0 200.1 0.65 2.90 .300
$074 3409 SA106B 70.0 15.0 stiff 0.65 2.90 .300

Line 89
BC01 ~635 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
~635 ~634 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
~634 ~633 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
~633 ~621 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
~621 3597 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
3597 3595 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
3595 ~749 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
~749 3583 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 166
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

3583 3579 SA234WPB 70.0 15.0 200.1 0.65 2.90 .300

3579 A076 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
A076 3577 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
3577 3575 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
3575 A077 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
A077 3573 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
3573 3569 SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
3569 ~748 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
~748 3559 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
3559 3557 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
3557 ~625 SA-105_ 70.0 15.0 198.5 0.65 2.90 .300
~625 3551 SA106B 70.0 15.0 200.1 0.65 2.90 .300
Bend SA234WPB 70.0 15.0 200.1 0.65 2.90 .300
3551 3655 SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
3655 3667 SA106B 65.0 15.0 200.5 0.59 11.90 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
3667 3671 SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
3671 A060 SA106B 65.0 15.0 200.5 0.59 11.90 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
A060 3673 SA-105_ 65.0 15.0 198.8 0.59 11.90 .300
3673 3675 SA106B 65.0 15.0 200.5 0.59 11.90 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
3675 A058 SA-105_ 65.0 15.0 198.8 0.59 11.90 .300
A058 3677 SA106B 65.0 15.0 200.5 0.59 11.90 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
3677 3681 SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
3681 1105 SA106B 65.0 15.0 200.5 0.59 11.90 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
1105 1107 SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
1107 ~556 SA106B 65.0 15.0 200.5 0.59 11.90 .300
Bend SA234WPB 65.0 15.0 200.5 0.59 11.90 .300
~556 N17 SA-105_ 65.0 15.0 198.8 0.59 11.90 .300
N17 ~698 SA-105_ 163.0 15.0 193.0 1.85 0.00 .300
~698 9417 SA-516_70 163.0 15.0 194.4 1.85 0.00 .300

Line 90
9441 EQ08 SA-516_70 60.0 15.0 200.5 0.53 0.00 .300

Line 91
9443 EQ07 SA-516_70 60.0 15.0 200.5 0.53 0.00 .300

Line 92
547 $075 SA234WPB 50.0 15.0 stiff 0.41 1.40 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 167
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

$075 571 SA234WPB 50.0 15.0 201.5 0.41 1.40 .300

571 8945 SA106B 50.0 15.0 201.5 0.41 1.40 .300
8945 573 SA-105_ 50.0 15.0 199.7 0.41 1.40 .300
573 575 SA106B 50.0 15.0 201.5 0.41 1.40 .300

Line 93
333 $076 SA234WPB 35.0 15.0 stiff 0.23 1.40 .300
$076 ~708 SA234WPB 35.0 15.0 202.5 0.23 1.40 .300
~708 387 SA106B 35.0 15.0 202.5 0.23 1.40 .300
387 8939 SA-105_ 35.0 15.0 200.5 0.23 1.40 .300
8939 391 SA106B 35.0 15.0 202.5 0.23 1.40 .300

Line 94
249 247 SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
247 A091 SA106B 60.0 15.0 200.8 0.53 4.00 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
A091 9487 SA-105_ 60.0 15.0 199.1 0.53 4.00 .300
9487 239 SA106B 60.0 15.0 200.8 0.53 4.00 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
239 ~709 SA-105_ 60.0 15.0 199.1 0.53 4.00 .300
~709 ~065 SA106B 60.0 15.0 200.8 0.53 4.00 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
~065 271 SA-105_ 60.0 15.0 199.1 0.53 4.00 .300
271 273 SA106B 60.0 15.0 200.8 0.53 4.00 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
273 ~066 SA-105_ 60.0 15.0 199.1 0.53 4.00 .300
~066 9429 SA106B 60.0 15.0 200.8 0.53 4.00 .300
Bend SA234WPB 60.0 15.0 200.8 0.53 4.00 .300
9429 $077 SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
$077 281 SA234WPB 163.0 15.0 stiff 1.85 2.50 .300

Line 95
235 $078 SA106B 60.0 15.0 stiff 0.53 4.00 .300
$078 257 SA106B 60.0 15.0 200.8 0.53 4.00 .300

Line 96
1091 $079 SA234WPB 163.0 15.0 stiff 1.85 2.50 .300
$079 1089 SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
1089 ~497 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
~497 1087 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
1087 1085 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
1085 ~741 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
~741 ~281 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
~281 1067 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
1067 1065 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 168
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MATERIAL PROPERTIES, OPERATING TEMPERATURE, PRESSURE

----------------------------------------------------
VPKT BPKT Material Oper.Temp Assm.Temp Y-Modul T-Expan Oper.Press. Ny
°C °C kN/mm² mm/m bar

1065 ~223 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300

~223 ~201 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
~201 9275 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
9275 9277 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
9277 ~200 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
~200 1099 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
1099 283 SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
283 ~197 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
~197 289 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
289 293 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
293 8971 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
8971 295 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
295 299 SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
299 8969 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
8969 305 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
305 307 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
307 ~196 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
~196 BC04 SA106B 163.0 15.0 194.1 1.85 2.50 .300
Bend SA234WPB 163.0 15.0 194.1 1.85 2.50 .300

Line 97
9413 EQ06 SA-516_70 163.0 15.0 194.4 1.85 0.00 .300

Line 98
9415 EQ05 SA-516_70 163.0 15.0 194.4 1.85 0.00 .300

Line 99
297 $080 SA234WPB 163.0 15.0 stiff 1.85 2.50 .300
$080 315 SA234WPB 163.0 15.0 194.1 1.85 2.50 .300
315 ~202 SA106B 163.0 15.0 194.1 1.85 2.50 .300
~202 317 SA-105_ 163.0 15.0 193.0 1.85 2.50 .300
317 319 SA106B 163.0 15.0 194.1 1.85 2.50 .300

Acceleration loads
------------------
The system mass data and the following accelerations are used
to calculate static loads, which are applied on the system:

Za acceleration = -9.810 m/s2

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
I N P U T S -- Program ROHR2 /34.1 -- Page 169
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT-PRELOADING (CS of input is valid)

------------------
Line Point QX(kN) QY(kN) QZ(kN) MX(kNm) MY(kNm) MZ(kNm)

3 S36 -3.67
3 S41 -2.91
42 SE11 -52.80
64 S179 -0.43
66 S180 -0.28

======================================================================

S U M M E D V A L U E S for checkup

Length Checksum Uniform. mass

(m) L*A*7.85 (t)

Straight 1142.933 63.444 223.029

Bend 94.453 4.428 6.189
---------------------------------------------
Straight+Bend 1237.386 67.872 229.218
Stiff Sections 894.120

Total mass (t) : 232.299

Center of gravity(m): XS= 760.023 YS= 5050.214 ZS= 100.611

 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 170
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

R E S U L T S STRUCTURE CALCULATION
=============================

CALCULATION OF STATIC LOAD CASES WITH NONLINEAR BOUNDARY CONDITIONS

System determinant of structure calculation = -0.2236204E-17

Numerical accuracy of the soln. of equations > 11.8 dec. places

L O A D C A S E Operation
==================================
STRUCTURE CALC. ACC. TO THEORY 1. ORDER

The nonlinear boundary conditions are corrected iteratively

Results from the RB-iteration step 100
Remaining iteration inaccuracy = Pt S108 AR(W) 0.822 % ( 0.040 mm)

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 1

N8 n ZE 0.0 0.0 0.0 0.02 0.06 -0.00 0.03 34.7

A117 v EM 0.0 -0.0 -0.0 0.02 0.06 -0.00 0.03 33.7
A117 n EM 0.0 -0.0 -0.0 0.02 0.06 -0.00 0.03 33.7
1787 v PT 0.0 -0.1 -0.0 0.02 0.05 -0.00 0.03 33.1
1785 v PT 0.0 -0.2 -0.0 0.02 0.05 -0.00 0.03 30.4
1785 n PT 0.0 -0.2 -0.0 0.02 0.05 -0.00 0.03 16.2
9459 v PT 0.0 -0.3 -0.0 0.02 0.05 -0.00 0.02 15.0
1781 v Elb 0.2 -0.7 -0.0 0.02 0.06 -0.00 0.01 11.7
1781 m Elb 0.2 -0.8 -0.0 -0.03 0.05 -0.00 0.01 11.3
1781 n Elb 0.1 -0.9 0.0 -0.05 0.02 -0.00 0.01 11.0
S96 v AR -1.2 -1.6 -0.0 -0.05 0.05 -0.00 0.02 12.6
S96 n AR -1.2 -1.6 -0.0 -0.04 0.07 -0.00 0.02 12.6
1779 v Elb -2.5 -2.3 -0.3 -0.04 0.05 -0.00 0.02 13.1
1779 m Elb -2.5 -2.4 -0.3 -0.04 0.05 -0.01 0.01 13.0
1779 n Elb -2.6 -2.4 -0.2 -0.01 0.06 -0.02 0.00 12.7
1777 v Elb -2.7 -2.4 -0.0 -0.00 0.06 -0.02 0.01 13.1
1777 m Elb -2.7 -2.4 0.1 -0.03 0.05 -0.02 0.01 13.3
1777 n Elb -2.7 -2.3 0.1 -0.04 0.04 -0.01 0.02 13.7
S95 v AR -2.7 -0.4 -0.0 -0.04 0.06 -0.01 0.02 16.4
S95 n AR -2.7 -0.4 -0.0 -0.05 0.09 -0.01 0.02 16.6
1775 v PT -3.0 1.7 -0.8 -0.05 0.03 -0.01 0.02 15.7
1775 n PT -3.0 1.7 -0.8 -0.05 0.03 -0.01 0.02 3.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 171
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1773 v PT -3.0 1.9 -0.8 -0.05 0.07 -0.01 0.02 3.4

1773 n PT -3.0 1.9 -0.8 -0.05 0.07 -0.01 0.02 15.1
1771 v Elb -3.1 2.3 -0.9 -0.05 0.08 -0.01 0.01 11.4
1771 m Elb -3.1 2.4 -0.9 -0.04 0.09 0.00 0.01 11.0
1771 n Elb -3.1 2.4 -0.8 -0.00 0.10 0.01 0.01 10.5
1769 v PT -2.7 2.5 -0.5 -0.00 0.10 0.01 0.02 12.7
1735 v PT -2.3 2.7 -0.1 -0.00 0.11 0.01 0.03 19.8

L i n e 2

1735 n PT -2.3 2.7 -0.1 -0.80 0.77 -0.33 0.03 21.8

1733 v PT -2.2 2.4 -0.2 -0.80 0.74 -0.33 0.09 22.0
1733 n PT -2.2 2.4 -0.2 -0.80 0.63 -0.33 0.09 22.0
1731 v PT -2.0 1.9 -0.2 -0.80 0.57 -0.33 0.21 22.7
1731 n PT -2.0 1.9 -0.2 -0.77 0.51 -0.33 0.20 22.6
1729 v PT -1.8 1.4 -0.2 -0.77 0.35 -0.33 0.28 23.3
1729 n PT -1.8 1.4 -0.2 -0.77 0.35 -0.33 0.28 6.0
1727 v PT -1.4 0.4 -0.2 -0.77 0.38 -0.33 0.28 6.0
1727 n PT -1.4 0.4 -0.2 -0.77 0.38 -0.33 0.28 23.3
1725 v PT -1.2 -0.1 -0.2 -0.77 0.55 -0.33 0.21 22.6
1725 n PT -1.2 -0.1 -0.2 -0.80 0.61 -0.33 0.22 22.7
9237 v PT -1.1 -0.4 -0.2 -0.80 0.64 -0.33 0.17 22.4
9205 v Elb -1.1 -0.4 -0.2 -0.80 0.64 -0.33 0.17 22.4
9205 m Elb -1.0 -0.5 -0.2 -0.49 0.91 -0.35 0.09 22.5
9205 n Elb -1.0 -0.6 -0.1 -0.10 1.05 -0.31 0.16 22.0
S97 v AR -1.0 -0.6 -0.1 -0.10 1.05 -0.31 0.16 22.0
S97 n AR -1.0 -0.6 -0.1 2.10 1.89 0.31 0.16 22.7
9203 v Elb -1.0 -0.6 -0.1 -2.10 1.89 -0.31 0.16 22.7
9203 m Elb -1.1 -0.7 0.1 -2.58 1.11 -0.22 0.32 28.3
9203 n Elb -1.1 -0.7 0.2 -2.66 0.84 -0.08 0.43 24.5
1721 v Elb -1.7 -0.5 2.1 -2.47 0.84 -0.08 0.97 34.8
1721 m Elb -1.5 -0.5 2.4 -2.28 1.19 0.01 0.95 55.3
1721 n Elb -1.2 -0.4 2.3 -0.79 2.41 0.12 0.73 29.3
1709 v PT -0.3 -0.1 1.8 -0.79 2.33 0.12 0.20 21.4
1709 n PT -0.3 -0.1 1.8 -0.79 2.27 0.12 0.20 21.4
1711 v Elb -0.0 -0.1 1.5 -0.79 2.24 0.12 0.34 22.7
1711 m Elb 0.2 -0.0 1.2 0.98 2.12 0.26 0.53 35.6
1711 n Elb 0.2 0.0 0.9 2.15 0.84 0.27 0.71 29.6
1713 v PT 0.1 -0.0 0.5 2.11 0.84 0.27 0.82 32.1
1715 v PT 0.0 -0.0 0.4 2.09 0.84 0.27 0.86 33.0
1715 n PT 0.0 -0.0 0.4 2.09 0.84 0.27 0.86 54.5
1717 v PT 0.0 -0.0 0.2 2.08 0.84 0.27 0.91 56.5
A035 v EM 0.0 -0.0 0.2 2.08 0.84 0.27 0.91 56.5
A035 n EM 0.0 -0.0 0.2 2.02 0.84 0.27 0.91 56.5
N7 v ZE 0.0 0.0 -0.0 2.00 0.84 0.27 0.97 59.6

L i n e 3

1735 n PT -2.3 2.7 -0.1 -0.85 0.87 -0.31 0.05 21.7

S66 v AR -2.8 3.9 -0.1 -0.85 1.00 -0.31 0.40 24.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 172
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S66 n AR -2.8 3.9 -0.1 -0.11 2.13 -0.31 0.40 25.0

9209 v Elb -2.9 4.2 -0.1 -0.11 2.10 -0.31 0.16 22.6
9209 m Elb -3.2 4.5 0.1 -1.47 1.45 -0.29 0.13 22.8
9209 n Elb -3.5 4.6 0.3 -1.94 0.62 -0.15 0.26 22.3
9235 v EM -3.5 4.6 0.3 -1.94 0.61 -0.15 0.26 22.3
9235 n EM -3.5 4.6 0.3 -1.83 0.61 -0.15 0.26 22.2
1745 v PT -3.8 4.6 0.6 -1.80 0.61 -0.15 0.21 21.8
1745 n PT -3.8 4.6 0.6 -1.80 0.61 -0.15 0.21 5.8
1747 v PT -4.7 4.6 1.5 -1.26 0.61 -0.15 0.10 5.8
1747 n PT -4.7 4.6 1.5 -1.26 0.62 -0.15 0.10 21.0
1749 v Elb -7.8 4.4 4.6 -0.80 0.61 -0.15 0.75 29.2
1749 m Elb -7.9 4.4 5.0 -0.97 0.16 -0.14 0.78 46.3
1749 n Elb -7.7 4.5 5.2 -0.60 0.75 -0.05 0.74 28.6
S65 v AR -0.0 5.7 4.8 -0.60 0.14 -0.05 0.27 21.8
S65 n AR -0.0 5.7 4.8 -1.10 0.18 -0.05 0.27 22.0
S65 -1229 6.0 7.8 5.1 -1.10 0.83 -0.05 0.94 33.0
1229 v PT 6.0 7.8 4.9 -1.10 0.83 -0.05 0.94 33.0
1229 n PT 6.0 7.8 4.9 -1.10 0.83 -0.06 0.94 33.0
1187 v PT 6.3 7.9 4.8 -1.10 0.86 -0.06 1.02 35.1
1187 n PT 6.3 7.9 4.8 -0.15 0.74 0.90 0.98 41.1
1235 v PT 6.6 8.0 4.7 -0.15 0.73 0.90 0.91 39.9
1237 v Elb 11.4 11.9 4.1 -0.15 0.77 0.90 0.47 33.1
1237 m Elb 11.7 12.0 3.9 -0.60 0.52 0.80 0.69 45.8
1237 n Elb 12.0 11.8 3.5 -0.70 0.41 0.19 1.08 36.5
S64 v HR 12.6 10.0 0.1 -0.70 0.58 0.19 1.33 42.8
S64 n HR 12.6 10.0 0.1 -0.72 1.10 0.19 1.33 43.1
S64 -S47 12.9 10.0 -22.8 -0.72 1.10 0.19 1.33 43.1
S47 v PT 12.1 1.0 -22.8 -0.72 0.17 0.19 0.80 30.3
1241 v Elb 11.9 -0.4 -25.5 -0.72 0.13 0.19 0.83 30.8
1241 m Elb 12.0 -0.7 -25.8 -0.60 0.42 -0.44 0.72 44.1
1241 n Elb 12.3 -0.9 -25.7 -0.13 0.72 -0.81 0.18 28.8
1243 v Elb 14.4 -1.2 -23.5 -0.13 0.79 -0.81 0.57 32.8
1243 m Elb 14.7 -1.4 -23.3 -0.60 0.56 -0.59 0.84 50.5
1243 n Elb 14.6 -1.8 -23.3 -0.72 0.42 -0.05 1.00 34.3
1245 v Elb 14.2 -2.3 -23.5 -0.72 0.48 -0.05 0.92 32.4
1245 m Elb 13.8 -2.6 -23.4 -0.16 0.87 -0.48 0.71 43.8
1245 n Elb 13.3 -2.7 -23.1 0.53 0.73 -0.62 0.49 28.6
S63 v AR 9.9 -2.0 -20.4 0.82 0.73 -0.62 0.30 26.4
S63 n AR 9.9 -2.0 -20.4 0.59 0.12 -0.62 0.30 26.3
S62 v AR -2.0 2.0 -4.9 2.25 0.12 -0.62 0.56 29.9
S62 n AR -2.0 2.0 -4.9 2.09 0.32 -0.62 0.56 29.9
1247 v Elb -2.2 2.8 -3.9 2.20 0.32 -0.62 0.58 30.2
1247 m Elb -2.4 3.6 -3.6 1.78 1.39 -0.15 0.79 47.1
1247 n Elb -2.7 5.2 -3.4 0.28 2.27 0.39 0.60 29.4
1249 v Elb -3.2 8.0 -3.4 0.28 2.33 0.39 0.66 30.4
1249 m Elb -4.1 9.5 -3.2 0.09 2.38 0.62 0.57 39.0
1249 n Elb -5.9 9.9 -2.9 -0.16 2.41 0.70 0.49 32.9
1251 v Elb -8.6 9.4 -2.4 -0.16 2.46 0.70 0.60 34.3
1251 m Elb -10.3 9.2 -1.9 1.64 1.89 0.19 1.03 58.6
1251 n Elb -11.2 9.3 -1.5 2.51 0.32 -0.40 1.03 37.7
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 173
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1253 v Elb -12.5 10.1 0.0 2.68 0.32 -0.40 1.02 37.4
1253 m Elb -13.5 10.0 0.3 1.81 2.05 0.05 1.19 66.6
1253 n Elb -15.5 9.7 0.4 -0.16 2.76 0.45 1.37 47.0
S61 v HR -17.3 9.4 0.2 -0.16 2.79 0.45 1.64 53.4
S61 n HR -17.3 9.4 0.2 -0.20 1.21 0.45 1.64 52.2
S46 v PT -46.9 5.2 -5.0 -0.20 0.77 0.45 0.27 24.1
1257 v Elb -84.5 -0.6 -12.4 -0.20 0.36 0.45 1.27 42.2
1257 m Elb -86.5 -1.0 -12.5 -0.15 0.38 1.08 0.84 54.3
1257 n Elb -87.9 -1.2 -12.3 0.03 0.41 1.11 0.78 40.4
~330 -~331 -112.8 -1.5 -12.3 1.01 0.41 1.11 0.83 41.5
1259 v Elb -112.8 0.6 -3.2 1.01 0.41 1.11 0.83 41.5
1259 m Elb -113.3 0.5 -2.7 0.49 1.01 0.80 1.18 67.9
1259 n Elb -113.2 0.1 -2.0 -0.36 1.10 0.04 1.50 46.8
S60 v AR -111.6 -2.0 -0.0 -0.36 1.26 0.04 1.97 59.6
S60 n AR -111.6 -2.0 -0.0 -1.05 1.06 0.04 1.97 60.0
S60 -S59 -111.6 -5.3 1.4 -1.05 1.06 0.04 1.97 60.0
S59 v AR -95.5 -2.0 -0.0 -1.05 0.71 0.04 0.65 27.4
S59 n AR -95.5 -2.0 -0.0 -1.56 0.82 0.04 0.65 27.6
S59 -S58 -95.5 -2.0 -2.4 -1.56 0.91 0.04 0.93 33.1
S58 v AR -79.4 1.1 -0.0 -1.56 0.91 0.04 0.93 33.1
S58 n AR -79.4 1.1 -0.0 -2.10 0.88 0.04 0.93 33.4
S58 -S57 -79.4 1.1 -1.6 -2.10 0.88 0.04 0.93 33.4
S57 v AR -63.3 0.7 -0.0 -2.10 0.85 0.04 0.85 31.7
S57 n AR -63.3 0.7 -0.0 -2.61 0.86 0.04 0.85 32.0
S57 -S55 -63.3 0.7 -1.8 -2.61 0.87 0.04 0.87 32.4
S55 v AR -47.2 0.0 -0.0 -2.61 0.87 0.04 0.87 32.4
S55 n AR -47.2 0.0 -0.0 -3.13 0.87 0.04 0.87 32.7
S55 -S54 -47.2 -0.2 -1.7 -3.13 0.87 0.04 0.87 32.7
S54 v AR -31.1 -0.2 -0.0 -3.13 0.86 0.04 0.86 32.6
S54 n AR -31.1 -0.2 -0.0 -3.65 0.86 0.04 0.86 32.9
S54 -S53 -31.1 -0.2 -1.8 -3.65 0.86 0.04 0.86 32.9
S53 v AR -15.0 -0.1 -0.0 -3.65 0.86 0.04 0.86 32.9
S53 n AR -15.0 -0.1 -0.0 -4.17 0.86 0.04 0.86 33.2
S53 -S52 -15.0 -0.1 -1.7 -4.17 0.87 0.04 0.87 33.3
S52 v AR 1.0 0.0 -0.0 -4.17 0.87 0.04 0.87 33.3
S52 n AR 1.0 0.0 -0.0 -2.50 0.87 0.04 0.87 32.3
S52 -S51 17.1 0.0 -1.8 -2.50 0.87 0.04 0.87 32.3
S51 v AR 17.1 0.0 -0.0 -2.50 0.86 0.04 0.85 31.9
S51 n AR 17.1 0.0 -0.0 -1.99 0.85 0.04 0.85 31.6
S51 -S49 33.2 0.1 -1.6 -1.99 0.88 0.04 0.93 33.5
S49 v AR 33.2 0.1 -0.0 -1.99 0.88 0.04 0.93 33.5
S49 n AR 33.2 0.1 -0.0 -1.45 0.92 0.04 0.93 33.1
S49 -S48 49.3 0.2 -2.5 -1.45 0.92 0.04 0.93 33.1
S48 v AR 49.3 0.2 -0.0 -1.45 0.81 0.04 0.61 26.8
S48 n AR 49.3 0.2 -0.0 -1.04 0.53 0.04 0.61 26.6
S48 -S45 57.4 0.6 0.4 -1.04 0.53 0.04 0.61 26.6
S45 v AR 57.4 0.6 -0.0 -1.04 0.34 0.04 0.32 22.4
S45 n AR 57.4 0.6 -0.0 -0.75 0.64 0.04 0.32 22.3
S45 -S34 65.4 1.2 -1.0 -0.75 0.64 0.04 0.39 23.2
S34 v PT 65.4 1.2 -0.7 -0.75 0.22 0.04 0.31 22.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 174
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S44 v AR 73.5 2.0 -0.0 -0.75 1.09 0.04 1.66 51.4

S44 n AR 73.5 2.0 -0.0 -0.11 1.00 0.04 1.66 51.0
1285 v Elb 76.5 2.4 -3.6 -0.11 0.67 0.04 0.71 28.0
1285 m Elb 76.6 2.6 -4.2 0.37 0.53 0.05 0.64 39.3
1285 n Elb 76.2 3.0 -4.8 0.60 0.12 0.03 0.60 26.2
S43 v AR 57.1 14.3 -12.2 -0.21 0.12 0.03 0.29 21.8
1287 v Elb 38.1 23.0 -18.5 -0.88 0.12 0.03 0.16 21.0
1287 m Elb 37.2 23.5 -18.6 -0.62 0.69 0.02 0.20 23.2
1287 n Elb 36.8 23.9 -18.4 0.04 0.96 -0.01 0.31 22.0
1289 v Elb 36.9 25.0 -17.3 0.04 1.07 -0.01 0.69 27.5
1289 m Elb 36.5 25.3 -17.2 -0.75 0.81 0.06 0.80 47.2
1289 n Elb 35.7 25.6 -17.4 -1.13 0.12 0.11 0.85 31.3
S42 v AR 9.8 20.0 -26.3 -2.09 0.12 0.11 1.06 36.6
S42 n AR 9.8 20.0 -26.3 -2.00 0.38 0.11 1.06 36.6
1291 v Elb 4.0 15.4 -28.6 -2.25 0.38 0.11 1.39 45.3
1291 m Elb 3.3 14.5 -28.6 -1.88 1.35 0.42 1.27 71.5
1291 n Elb 2.9 13.9 -27.8 -0.38 2.32 0.49 1.02 38.9
S41 v HR 1.8 11.6 -20.1 -0.38 2.57 0.49 1.06 40.0
S41 n HR 1.8 11.6 -20.1 -0.40 0.68 0.49 1.06 38.0
S33 v PT -1.3 5.7 -3.4 -0.40 0.08 0.49 0.30 24.7
A055 v PT -2.2 3.5 2.0 -0.40 0.22 0.49 0.39 25.6
1295 v Elb -3.1 -0.2 9.7 -0.40 0.60 0.49 0.93 35.0
1295 m Elb -3.1 -0.5 10.2 -0.34 0.67 1.00 0.44 38.6
1295 n Elb -2.8 -0.6 10.4 -0.07 0.78 0.98 0.46 34.3
1297 v Elb -1.0 -0.4 10.7 -0.07 0.94 0.98 0.10 32.2
1297 m Elb -0.7 -0.5 10.6 -0.68 0.70 0.73 0.66 43.8
1297 n Elb -0.6 -0.6 10.3 -0.92 0.41 0.08 0.94 33.0
S40 v AR -0.6 -0.9 9.3 -1.02 0.41 0.08 0.80 30.1
1299 v PT -0.6 -1.0 8.8 -1.08 0.41 0.08 0.71 28.5
1301 v PT -0.6 -1.1 8.5 -1.12 0.41 0.08 0.67 27.8
1301 n PT -0.6 -1.1 8.5 -0.96 0.20 0.03 0.47 24.3
1303 v PT -0.6 -1.1 8.2 -1.00 0.20 0.03 0.45 24.0
1305 v PT -1.5 -0.6 2.9 -1.68 0.20 0.03 0.06 20.6
1305 n PT -1.5 -0.6 2.9 -1.68 0.20 0.03 0.06 5.7
1307 v PT -1.7 -0.4 2.1 -2.49 0.20 0.03 0.04 5.7
1307 n PT -1.7 -0.4 2.1 -2.49 0.20 0.03 0.04 20.6
9239 v Elb -2.1 -0.1 0.2 -2.80 0.20 0.03 0.15 21.3
9239 m Elb -2.1 -0.0 0.1 -2.65 0.98 -0.01 0.14 22.4
9239 n Elb -2.0 -0.0 -0.1 -2.09 1.93 -0.05 0.10 20.9
S39 v AR -2.0 -0.0 -0.1 2.09 1.92 0.05 0.10 20.9
S39 n AR -2.0 -0.0 -0.1 -0.58 1.45 -0.05 0.10 20.7
9241 v Elb -2.0 -0.0 -0.1 -0.58 1.45 -0.05 0.10 20.7
9241 m Elb -1.9 0.0 -0.2 -1.10 1.10 -0.08 0.11 21.6
9241 n Elb -1.8 0.0 -0.2 -1.43 0.59 -0.11 0.14 21.1
9255 v PT -1.8 0.0 -0.2 -1.43 0.59 -0.11 0.14 21.1
1311 v PT -1.5 0.1 -0.3 -1.43 0.56 -0.11 0.20 21.5
1311 n PT -1.5 0.1 -0.3 -1.43 0.45 -0.11 0.20 21.5
1313 v PT -1.2 0.1 -0.3 -1.43 0.42 -0.11 0.24 21.9
1315 v PT -1.1 0.1 -0.3 -1.43 0.41 -0.11 0.26 22.0
1315 n PT -1.1 0.1 -0.3 -1.43 0.41 -0.11 0.26 23.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 175
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1317 v PT -0.9 0.1 -0.3 -1.43 0.40 -0.11 0.28 24.5

1317 n PT -0.9 0.1 -0.3 -1.43 0.40 -0.11 0.28 24.5
A032 v EM -0.9 0.1 -0.3 -1.43 0.40 -0.11 0.28 24.6
A032 n EM -0.9 0.1 -0.3 -1.43 0.33 -0.11 0.28 24.6
1319 v PT -0.7 0.1 -0.3 -1.43 0.31 -0.11 0.31 25.4
1319 n PT -0.7 0.1 -0.3 -1.43 0.31 -0.11 0.31 5.3
1321 v PT 0.1 0.2 -0.3 -1.43 0.23 -0.11 0.32 5.2
1321 n PT 0.1 0.2 -0.3 -1.43 0.23 -0.11 0.32 26.0
A033 v EM 0.3 0.2 -0.3 -1.43 0.24 -0.11 0.31 25.4
A033 n EM 0.3 0.2 -0.3 -1.43 0.31 -0.11 0.31 25.4
1323 v PT 0.4 0.2 -0.3 -1.43 0.31 -0.11 0.31 25.4
1323 n PT 0.4 0.2 -0.3 -1.43 0.31 -0.11 0.31 25.4
1325 v PT 0.5 0.2 -0.3 -1.43 0.32 -0.11 0.29 24.9
1325 n PT 0.5 0.2 -0.3 -1.43 0.32 -0.11 0.29 22.4
1327 v PT 0.6 0.3 -0.3 -1.43 0.33 -0.11 0.28 22.2
1329 v PT 0.9 0.3 -0.3 -1.43 0.36 -0.11 0.25 21.9
1329 n PT 0.9 0.3 -0.3 -1.43 0.47 -0.11 0.25 21.9
9245 v Elb 1.4 0.3 -0.3 -1.43 0.53 -0.11 0.16 21.2
9245 m Elb 1.6 0.3 -0.2 -1.12 1.05 -0.14 0.10 21.4
9245 n Elb 1.7 0.3 -0.1 -0.62 1.41 -0.15 0.01 20.7
S38 v AR 1.7 0.3 -0.1 0.62 1.41 0.15 0.01 20.7
S38 n AR 1.7 0.3 -0.1 -3.05 3.05 -0.15 0.01 21.4
9247 v Elb 1.7 0.3 -0.1 -3.05 3.05 -0.15 0.01 21.4
9247 m Elb 1.8 0.3 0.1 -3.96 1.67 -0.14 0.16 23.4
9247 n Elb 1.8 0.3 0.2 -4.27 0.30 -0.11 0.21 22.4
9257 v PT 1.8 0.3 0.2 -4.27 0.30 -0.11 0.21 22.4
1333 v PT 1.3 0.4 2.0 -3.96 0.30 -0.11 0.24 22.6
1333 n PT 1.3 0.4 2.0 -3.96 0.30 -0.11 0.24 5.8
1335 v PT 1.1 0.4 2.9 -3.15 0.30 -0.11 0.30 5.8
1335 n PT 1.1 0.4 2.9 -3.15 0.30 -0.11 0.30 17.8
1339 v PT -1.3 -1.2 7.9 -2.44 0.30 -0.11 0.87 29.6
1341 v PT -1.5 -1.4 8.1 -2.40 0.30 -0.11 0.90 30.3
1341 n PT -1.5 -1.4 8.1 -1.26 0.36 0.00 0.76 25.8
1343 v PT -1.7 -1.6 8.4 -1.23 0.36 0.00 0.76 25.9
S37 v AR -2.0 -2.0 8.8 -1.17 0.36 0.00 0.78 26.4
S37 n AR -2.0 -2.0 8.8 -1.00 0.20 0.00 0.78 26.3
1345 v Elb -2.5 -2.4 9.4 -0.93 0.20 0.00 0.83 27.4
1345 m Elb -2.7 -2.4 9.7 -0.76 0.51 -0.34 0.75 42.6
1345 n Elb -2.7 -2.2 9.8 -0.18 0.87 -0.49 0.57 25.2
1347 v PT -2.7 -2.2 9.8 0.18 0.87 0.49 0.57 25.2
1347 n PT -2.7 -2.2 9.8 -0.18 0.87 -0.49 0.57 25.2
1349 v Elb -2.7 -2.2 9.8 -0.18 0.87 -0.49 0.57 25.2
1349 m Elb -2.8 -1.9 9.7 -0.19 0.83 0.02 0.66 37.4
1349 n Elb -3.0 -1.7 9.3 -0.09 0.82 0.45 0.36 20.9
1351 v Elb -6.9 -0.8 3.6 -0.09 0.37 0.45 0.63 25.0
1351 m Elb -7.1 -0.6 3.2 -0.19 0.30 0.72 0.33 28.0
1351 n Elb -7.1 -0.3 2.8 -0.18 0.27 0.60 0.51 24.8
A054 v PT -5.2 2.2 -0.5 -0.18 0.10 0.60 0.37 22.3
S30 v PT -3.4 4.2 -3.5 -0.18 0.30 0.60 0.46 23.9
S36 v HR 2.1 9.5 -15.6 -0.18 0.94 0.60 1.80 55.7
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 176
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S36 n HR 2.1 9.5 -15.6 -0.15 3.26 0.60 1.80 57.9

1 v Elb 4.2 11.5 -22.7 -0.15 3.01 0.60 0.87 36.0
1 m Elb 4.6 12.1 -23.5 -2.21 2.00 0.52 1.22 67.8
1 n Elb 5.2 12.9 -23.5 -2.94 0.18 0.15 1.42 44.7
S35 v AR 10.0 17.4 -21.5 -2.69 0.18 0.15 1.26 40.3
S35 n AR 10.0 17.4 -21.5 -2.70 0.19 0.15 1.26 40.3
S35 -S29 52.6 22.0 -21.5 -2.70 0.19 0.15 1.26 40.3
S29 v AR 52.6 15.0 -7.4 -0.97 0.19 0.15 0.38 18.3
S29 n AR 52.6 15.0 -7.4 -0.97 0.16 0.15 0.38 18.3
1361 v Elb 65.7 7.3 -2.7 -0.39 0.16 0.15 0.58 21.5
1361 m Elb 66.3 6.8 -2.6 -0.20 0.33 0.51 0.33 25.4
1361 n Elb 66.6 6.3 -3.0 0.07 0.35 0.58 0.15 20.2
1363 v Elb 66.6 6.1 -3.3 0.07 0.33 0.58 0.12 20.1
1363 m Elb 66.9 5.7 -3.7 -0.14 0.28 0.49 0.35 25.8
1363 n Elb 67.4 5.1 -3.6 -0.23 0.16 0.09 0.61 21.8
1365 v Elb 68.8 3.4 -2.7 -0.12 0.16 0.09 0.67 22.9
1365 m Elb 69.1 2.9 -2.3 -0.16 0.08 0.08 0.68 38.2
1365 n Elb 69.0 2.7 -1.9 -0.15 0.08 0.03 0.68 23.2
S32 v AR 65.1 2.0 -0.0 -0.15 0.43 0.03 0.98 30.9
S32 n AR 65.1 2.0 -0.0 -0.58 0.92 0.03 0.98 31.3
S27 v PT 58.0 1.0 -2.2 -0.58 0.06 0.03 0.49 19.7
S31 v AR 50.8 0.3 -0.0 -0.58 0.80 0.03 0.63 22.3
S31 n AR 50.8 0.3 -0.0 -1.00 0.60 0.03 0.63 22.5
S31 -S28 50.8 0.3 0.2 -1.00 0.60 0.03 0.63 22.5
S28 v AR 43.7 0.1 -0.0 -1.00 0.26 0.03 0.11 14.8
S28 n AR 43.7 0.1 -0.0 -1.19 0.39 0.03 0.11 14.8
S28 -S26 43.7 0.1 -0.2 -1.19 0.48 0.03 0.24 16.1
S26 v AR 36.6 0.0 -0.0 -1.19 0.48 0.03 0.24 16.1
S26 n AR 36.6 0.0 -0.0 -1.47 0.44 0.03 0.24 16.2
S25 v AR 29.5 0.0 -0.0 -1.47 0.42 0.03 0.21 15.8
S25 n AR 29.5 0.0 -0.0 -1.72 0.43 0.03 0.21 15.9
S25 -S24 29.5 0.0 -0.1 -1.72 0.44 0.03 0.22 16.0
S24 v AR 22.4 0.0 -0.0 -1.72 0.44 0.03 0.22 16.0
S24 n AR 22.4 0.0 -0.0 -1.98 0.43 0.03 0.22 16.1
S24 -S23 22.4 0.0 -0.1 -1.98 0.43 0.03 0.22 16.1
S23 v AR 15.3 0.0 -0.0 -1.98 0.43 0.03 0.22 16.0
S23 n AR 15.3 0.0 -0.0 -2.24 0.43 0.03 0.22 16.1
S23 -S22 15.3 0.0 -0.1 -2.24 0.43 0.03 0.22 16.1
S22 v AR 8.2 0.0 -0.0 -2.24 0.43 0.03 0.22 16.1
S22 n AR 8.2 0.0 -0.0 -2.50 0.43 0.03 0.22 16.2
S22 -S21 8.2 0.0 -0.1 -2.50 0.43 0.03 0.22 16.2
S21 v AR 1.0 0.0 -0.0 -2.50 0.43 0.03 0.22 16.2
S21 n AR 1.0 0.0 -0.0 -5.08 0.43 0.03 0.22 17.2
S21 -S20 -6.0 -0.0 -0.1 -5.08 0.43 0.03 0.22 17.2
S20 v AR -6.0 -0.0 -0.0 -5.08 0.43 0.03 0.22 17.2
S20 n AR -6.0 -0.0 -0.0 -4.82 0.43 0.03 0.22 17.1
S20 -S19 -13.1 -0.1 -0.1 -4.82 0.43 0.03 0.22 17.1
S19 v AR -13.1 -0.1 -0.0 -4.82 0.43 0.03 0.22 17.1
S19 n AR -13.1 -0.1 -0.0 -4.57 0.43 0.03 0.22 17.0
S19 -S18 -20.2 -0.1 -0.1 -4.57 0.43 0.03 0.22 17.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 177
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S18 v AR -20.2 -0.1 -0.0 -4.57 0.43 0.03 0.22 17.0

S18 n AR -20.2 -0.1 -0.0 -4.31 0.43 0.03 0.22 16.9
S18 -S17 -27.3 -0.1 -0.1 -4.31 0.43 0.03 0.22 16.9
S17 v AR -27.3 -0.1 -0.0 -4.31 0.43 0.03 0.22 16.9
S17 n AR -27.3 -0.1 -0.0 -4.05 0.43 0.03 0.22 16.8
S17 -S16 -34.4 -0.1 -0.1 -4.05 0.43 0.03 0.22 16.8
S16 v AR -34.4 -0.1 -0.0 -4.05 0.43 0.03 0.22 16.8
S16 n AR -34.4 -0.1 -0.0 -3.79 0.43 0.03 0.22 16.7
S16 -S15 -41.5 -0.1 -0.1 -3.79 0.43 0.03 0.22 16.7
S15 v AR -41.5 -0.1 -0.0 -3.79 0.43 0.03 0.22 16.7
S15 n AR -41.5 -0.1 -0.0 -3.53 0.43 0.03 0.22 16.6
S15 -S14 -48.6 -0.1 -0.1 -3.53 0.43 0.03 0.22 16.6
S14 v AR -48.6 -0.1 -0.0 -3.53 0.43 0.03 0.22 16.6
S14 n AR -48.6 -0.1 -0.0 -3.27 0.43 0.03 0.22 16.5
S14 -S13 -55.7 -0.1 -0.1 -3.27 0.43 0.03 0.22 16.5
S13 v AR -55.7 -0.1 -0.0 -3.27 0.43 0.03 0.22 16.5
S13 n AR -55.7 -0.1 -0.0 -3.01 0.43 0.03 0.22 16.4
S13 -S12 -62.8 -0.2 -0.1 -3.01 0.43 0.03 0.22 16.4
S12 v AR -62.8 -0.2 -0.0 -3.01 0.43 0.03 0.22 16.4
S12 n AR -62.8 -0.2 -0.0 -2.75 0.43 0.03 0.22 16.3
S12 -S11 -69.9 -0.6 -0.1 -2.75 0.43 0.03 0.22 16.3
S11 v AR -69.9 -0.6 -0.0 -2.75 0.43 0.03 0.22 16.3
S11 n AR -69.9 -0.6 -0.0 -2.49 0.43 0.03 0.22 16.2
S11 -S10 -77.0 -1.1 -0.1 -2.49 0.43 0.03 0.22 16.2
S10 v AR -77.0 -1.1 -0.0 -2.49 0.43 0.03 0.22 16.2
S10 n AR -77.0 -1.1 -0.0 -2.23 0.43 0.03 0.22 16.1
S10 -S9 -84.1 -2.0 -0.1 -2.23 0.43 0.03 0.22 16.1
S9 v AR -84.1 -2.0 -0.0 -2.23 0.43 0.03 0.22 16.1
S9 n AR -84.1 -2.0 -0.0 -1.94 0.45 0.03 0.22 16.0
S9 -S8 -91.2 -2.5 -0.1 -1.94 0.45 0.03 0.36 18.1
S8 v AR -91.2 -2.3 -0.0 -1.94 0.44 0.03 0.36 18.1
S8 n AR -91.2 -2.3 -0.0 -1.69 0.44 0.03 0.36 18.0
S7 v AR -98.4 2.0 -0.0 -1.69 0.46 0.03 0.67 23.9
S7 n AR -98.4 2.0 -0.0 -1.31 0.53 0.03 0.67 23.7
S7 -S6 -105.5 13.3 -0.2 -1.31 0.53 0.03 0.67 23.7
S6 v AR -105.5 13.3 -0.0 -1.31 0.46 0.03 0.16 15.2
S6 n AR -105.5 13.3 -0.0 -1.11 0.39 0.03 0.16 15.2
S6 -S5 -112.6 22.9 0.2 -1.11 0.64 0.03 1.06 33.6
S5 v AR -112.6 22.9 -0.0 -1.11 0.64 0.03 1.06 33.6
S5 n AR -112.6 22.9 -0.0 -0.71 0.83 0.03 1.06 33.4
S5 -~379 -118.6 23.6 -1.9 -0.71 0.83 0.03 1.82 54.1
1419 v Elb -118.6 20.3 -1.9 -0.71 0.35 0.03 1.82 54.1
1419 m Elb -118.9 19.8 -1.8 -0.50 0.62 1.29 1.33 77.0
1419 n Elb -118.9 19.6 -1.5 0.04 0.79 1.83 0.32 49.7
1421 v Elb -118.6 19.9 -0.5 0.17 0.79 1.83 0.17 49.1
1421 m Elb -118.1 19.9 -0.2 -0.10 0.81 1.32 1.23 72.7
1421 n Elb -117.0 19.7 -0.0 -0.35 0.75 0.11 1.74 51.6
S4 v AR -115.2 19.3 -0.0 -0.35 0.77 0.11 1.63 48.7
S4 n AR -115.2 19.3 -0.0 -0.39 0.69 0.11 1.63 48.7
S3 v AR -78.8 13.5 -0.0 -0.39 0.56 0.11 0.33 17.1
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 178
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S3 n AR -78.8 13.5 -0.0 -0.41 0.41 0.11 0.33 17.1

S3 -S2 -78.8 13.5 0.4 -0.41 0.83 0.11 1.25 38.4
S2 v AR -25.8 6.1 -0.0 -0.41 0.83 0.11 1.25 38.4
S2 n AR -25.8 6.1 -0.0 -0.53 0.94 0.11 1.25 38.6
1427 v Elb -0.7 1.7 -3.4 -0.53 0.40 0.11 0.65 23.0
1427 m Elb 0.6 1.4 -3.5 -0.61 0.20 -0.31 0.57 34.2
1427 n Elb 1.0 1.2 -3.3 -0.30 0.55 -0.53 0.32 21.4
S1 v AR 0.0 -0.0 -0.1 0.09 0.55 -0.53 0.42 22.7
S1 n AR 0.0 -0.0 -0.1 -3.19 0.27 -0.53 0.42 23.6
S1 -~371 0.9 -5.2 12.6 -3.19 0.27 -0.53 1.05 36.5
1429 v Elb 0.9 -4.3 12.6 -1.65 0.27 -0.53 1.05 36.5
1429 m Elb 1.1 -3.9 12.8 -1.17 1.15 -1.10 0.44 37.6
1429 n Elb 1.5 -3.5 12.7 -0.04 1.60 -1.04 0.50 35.6
1431 v Elb 1.9 -2.9 12.3 -0.04 1.55 -1.04 0.50 35.4
1431 m Elb 2.1 -2.5 12.0 -0.21 1.50 -0.97 0.58 40.5
1431 n Elb 2.0 -2.2 11.5 -0.26 1.46 -0.46 0.91 32.8
1433 v PT 0.0 1.6 4.3 -0.26 1.00 -0.46 1.23 40.1
1435 v PT -0.0 1.8 3.9 -0.26 0.98 -0.46 1.33 42.6

L i n e 4

1733 n PT -2.2 2.4 -0.2 0.11 0.00 0.00 0.00 9.5

1763 v PT -1.9 2.4 -0.5 0.10 0.00 0.00 0.00 9.5
1763 n PT -1.9 2.4 -0.5 0.10 0.00 0.00 0.00 3.3
1765 v PT -1.7 2.5 -0.7 0.00 0.00 0.00 0.00 3.3

L i n e 5

1187 n PT 6.3 7.9 4.8 -1.11 1.18 0.76 1.63 55.2

1185 v PT 6.2 7.8 4.5 -1.13 1.18 0.76 1.51 52.2
1183 v PT 3.7 6.3 1.2 -1.59 1.18 0.76 0.06 28.4
1183 n PT 3.7 6.3 1.2 -1.59 1.18 0.76 0.06 7.1
1181 v PT 2.9 5.8 0.3 -2.14 1.18 0.76 0.34 7.1
1181 n PT 2.9 5.8 0.3 -2.14 1.18 0.76 0.34 30.4
9227 v EM 2.7 5.7 0.1 -2.16 1.18 0.76 0.44 31.6
9227 n EM 2.7 5.7 0.1 -2.27 1.18 0.76 0.44 31.6
9221 v Elb 2.7 5.7 0.1 -2.27 1.18 0.76 0.44 31.6
9221 m Elb 2.4 5.4 -0.1 -1.14 2.33 0.83 0.48 38.0
9221 n Elb 2.1 5.1 -0.2 0.70 2.53 0.50 0.95 37.9
S91 v AR 1.9 4.7 -0.1 0.70 2.56 0.50 1.14 42.1
S91 n AR 1.9 4.7 -0.1 -0.37 1.54 0.50 1.14 40.7
1171 v PT 0.9 3.5 0.0 -0.37 1.42 0.50 0.48 27.7
1171 n PT 0.9 3.5 0.0 -0.37 1.29 0.45 0.47 26.7
1169 v PT 0.7 3.2 -0.0 -0.37 1.26 0.45 0.34 25.0
1169 n PT 0.7 3.2 -0.0 -0.37 1.17 0.45 0.34 24.9
1167 v PT 0.2 2.7 -0.0 -0.37 1.11 0.45 0.12 23.2
1167 n PT 0.2 2.7 -0.0 -0.34 1.06 0.45 0.13 23.1
1165 v PT -0.2 2.2 -0.1 -0.34 0.92 0.45 0.08 23.0
1165 n PT -0.2 2.2 -0.1 -0.34 0.92 0.45 0.08 6.3
1163 v PT -1.1 1.2 -0.1 -0.34 0.53 0.45 0.29 6.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 179
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1163 n PT -1.1 1.2 -0.1 -0.34 0.53 0.45 0.29 24.2

1161 v PT -1.5 0.7 -0.2 -0.34 0.54 0.45 0.36 24.9
1161 n PT -1.5 0.7 -0.2 -0.37 0.57 0.45 0.36 24.9
9229 v PT -1.7 0.5 -0.2 -0.37 0.58 0.45 0.39 25.3
9217 v Elb -1.7 0.5 -0.2 -0.37 0.58 0.45 0.39 25.3
9217 m Elb -1.8 0.3 -0.1 -0.25 0.64 0.55 0.25 27.4
9217 n Elb -1.9 0.2 -0.0 -0.08 0.69 0.58 0.15 24.8
S94 v AR -1.9 0.2 -0.0 -0.08 0.69 0.58 0.15 24.8
S94 n AR -1.9 0.2 -0.0 1.75 1.67 -0.58 0.15 26.6
9215 v Elb -1.9 0.2 -0.0 -1.75 1.67 0.58 0.15 26.6
9215 m Elb -1.9 0.1 0.1 -2.04 1.28 0.55 0.26 28.4
9215 n Elb -1.9 0.1 0.3 -2.01 1.30 0.45 0.35 25.8
1157 v Elb -1.7 0.4 2.1 -1.81 1.30 0.45 0.56 28.9
1157 m Elb -1.5 0.4 2.4 -2.12 0.59 0.41 0.64 41.4
1157 n Elb -1.2 0.3 2.3 -1.22 1.80 0.17 0.61 27.0
1145 v PT -0.3 0.1 1.8 -1.22 1.71 0.17 0.26 22.2
1145 n PT -0.3 0.1 1.8 -1.22 1.66 0.17 0.26 22.2
1147 v Elb -0.0 0.1 1.5 -1.22 1.63 0.17 0.32 22.8
1147 m Elb 0.2 0.0 1.2 0.22 1.99 -0.00 0.51 33.6
1147 n Elb 0.2 -0.0 0.9 1.50 1.30 -0.14 0.67 28.0
1149 v PT 0.1 -0.0 0.5 1.45 1.30 -0.14 0.84 31.6
1151 v PT 0.0 -0.0 0.4 1.44 1.30 -0.14 0.91 33.0
1151 n PT 0.0 -0.0 0.4 1.44 1.30 -0.14 0.91 54.7
1153 v PT 0.0 -0.0 0.2 1.43 1.30 -0.14 0.97 57.8
A036 v EM 0.0 -0.0 0.2 1.43 1.30 -0.14 0.97 58.0
A036 n EM 0.0 -0.0 0.2 1.36 1.30 -0.14 0.97 57.9
N9 v ZE 0.0 -0.0 -0.0 1.35 1.30 -0.14 1.07 62.8

L i n e 6

1171 n PT 0.9 3.5 0.0 -0.00 0.14 -0.01 0.05 29.7

1207 v PT 0.5 3.8 0.2 -0.00 0.13 -0.01 0.03 19.6
1209 v Elb 0.2 4.1 0.3 -0.00 0.12 -0.01 0.01 12.9
1209 m Elb 0.1 4.2 0.4 -0.00 0.12 -0.00 0.01 12.1
1209 n Elb -0.0 4.1 0.3 -0.00 0.12 0.01 0.01 11.1
1211 v PT -0.3 3.7 0.2 -0.00 0.11 0.01 0.01 10.6
1211 n PT -0.3 3.7 0.2 -0.00 0.11 0.01 0.01 3.4
1213 v PT -0.5 3.5 0.2 -0.00 0.01 0.01 0.01 3.4
1213 n PT -0.5 3.5 0.2 -0.00 0.01 0.01 0.01 11.5
S92 v AR -1.8 1.5 -0.0 -0.00 0.05 0.01 0.00 9.9
S92 n AR -1.8 1.5 -0.0 -0.02 0.03 0.01 0.00 9.9
1215 v Elb -2.8 -0.5 -0.0 -0.02 0.03 0.01 0.01 11.2
1215 m Elb -2.9 -0.6 -0.0 -0.03 0.02 -0.00 0.01 11.4
1215 n Elb -2.9 -0.6 -0.1 -0.03 0.02 -0.01 0.01 11.1
9455 v Elb -2.8 -0.6 -0.3 -0.03 0.02 -0.01 0.01 11.2
9455 m Elb -2.7 -0.6 -0.4 -0.03 0.02 -0.01 0.01 11.4
9455 n Elb -2.7 -0.6 -0.4 -0.01 0.04 -0.00 0.01 11.4
S93 v AR -1.4 -0.8 -0.0 -0.01 0.07 -0.00 0.02 14.0
S93 n AR -1.4 -0.8 -0.0 -0.05 0.06 -0.00 0.02 14.1
1217 v Elb -0.1 -0.9 0.0 -0.05 0.03 -0.00 0.01 10.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 180
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1217 m Elb 0.0 -0.8 0.0 -0.04 0.04 -0.00 0.01 10.0
1217 n Elb 0.0 -0.7 0.0 -0.00 0.05 -0.00 0.00 9.7
9457 v PT 0.0 -0.3 0.0 -0.00 0.05 -0.00 0.00 9.7
1223 v PT 0.0 -0.2 0.0 -0.00 0.05 -0.00 0.01 9.9
1223 n PT 0.0 -0.2 0.0 -0.00 0.05 -0.00 0.01 11.4
356 v PT 0.0 -0.1 0.0 -0.00 0.05 -0.00 0.01 12.6
A116 v EM 0.0 -0.0 0.0 -0.00 0.05 -0.00 0.01 12.8
A116 n EM 0.0 -0.0 0.0 -0.00 0.05 -0.00 0.01 12.8
N10 v ZE -0.0 0.0 0.0 -0.00 0.05 -0.00 0.01 13.3

L i n e 7

1311 n PT -1.5 0.1 -0.3 0.11 0.00 0.00 0.00 9.5

1565 v PT -1.5 0.1 -0.7 0.10 0.00 0.00 0.00 9.5
1565 n PT -1.5 0.1 -0.7 0.10 0.00 0.00 0.00 3.3
1567 v PT -1.6 0.1 -0.9 0.00 0.00 0.00 0.00 3.3

L i n e 8

1169 n PT 0.7 3.2 -0.0 0.11 0.00 0.00 0.00 9.5

1201 v PT 0.5 3.3 -0.4 0.10 0.00 0.00 0.00 9.5
1201 n PT 0.5 3.3 -0.4 0.10 0.00 0.00 0.00 3.3
1203 v PT 0.4 3.3 -0.6 0.00 0.00 0.00 0.00 3.3

L i n e 9

1709 n PT -0.3 -0.1 1.8 -0.06 0.00 0.00 0.00 9.7

1707 v PT -0.1 -0.1 2.2 -0.05 0.00 0.00 0.00 9.7
1707 n PT -0.1 -0.1 2.2 -0.05 0.00 0.00 0.00 3.2
1705 v PT 0.0 -0.1 2.3 0.00 0.00 0.00 0.00 3.2

L i n e 10

1301 n PT -0.6 -1.1 8.5 -0.25 0.17 0.09 0.27 21.8

1437 v PT -0.5 -1.4 8.5 -0.25 0.18 0.09 0.29 21.9
1437 n PT -0.5 -1.4 8.5 -0.25 0.18 0.09 0.29 19.3
1439 v Elb -0.4 -1.9 8.6 -0.25 0.24 0.09 0.33 19.8
1439 m Elb -0.4 -2.2 8.5 -0.37 0.05 0.11 0.34 25.2
1439 n Elb -0.3 -2.3 8.2 -0.30 0.26 0.08 0.33 19.8
1441 v PT -0.1 -0.6 3.0 -0.97 0.26 0.08 0.16 18.3
1441 n PT -0.1 -0.6 3.0 -0.97 0.26 0.08 0.16 4.9
1443 v PT -0.1 -0.3 2.1 -1.78 0.26 0.08 0.24 4.9
1443 n PT -0.1 -0.3 2.1 -1.78 0.26 0.08 0.24 19.3
A046 v Elb -0.0 0.1 0.3 -2.09 0.26 0.08 0.42 21.7
A046 m Elb -0.0 0.1 0.1 -2.04 0.58 0.04 0.41 29.0
A046 n Elb -0.0 0.0 0.0 -1.68 1.32 0.01 0.36 20.6
S78 v ST -0.0 -0.0 0.0 -1.68 1.32 0.01 0.36 20.6
S78 n ST 0.0 0.0 0.0 1.80 2.37 0.29 2.23 68.1
A047 v Elb -0.0 -0.0 -0.0 1.80 2.37 0.29 2.23 68.1
A047 m Elb -0.0 -0.1 -0.1 0.76 2.86 0.27 2.07 110.1
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 181
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

A047 n Elb -0.0 -0.3 -0.3 -0.38 2.92 0.23 1.90 58.3
1447 v PT -0.0 -0.5 -0.5 -0.38 2.89 0.23 1.61 50.6
1447 n PT -0.0 -0.5 -0.5 -0.38 2.74 0.23 1.61 50.5
1449 v PT -0.0 -0.8 -0.8 -0.38 2.71 0.23 1.34 43.5
1451 v PT -0.0 -0.9 -0.9 -0.38 2.69 0.23 1.21 40.0
1451 n PT -0.0 -0.9 -0.9 -0.38 2.69 0.23 1.21 70.9
1453 v PT -0.1 -1.1 -1.1 -0.38 2.68 0.23 1.07 64.0
A040 v EM -0.1 -1.1 -1.1 -0.38 2.68 0.23 1.06 63.7
A040 n EM -0.1 -1.1 -1.1 -0.38 2.62 0.23 1.06 63.6
1455 v PT -0.1 -1.3 -1.4 -0.38 2.60 0.23 0.86 53.7
1455 n PT -0.1 -1.3 -1.4 -0.38 2.60 0.23 0.86 9.7
1457 v PT -0.1 -2.1 -2.5 -0.38 2.08 0.23 0.20 5.6
1457 n PT -0.1 -2.1 -2.5 -0.38 2.08 0.23 0.20 25.6
A041 v EM -0.1 -2.4 -2.8 -0.38 2.06 0.23 0.20 25.6
A041 n EM -0.1 -2.4 -2.8 -0.38 2.00 0.23 0.20 25.5
1459 v PT -0.1 -2.4 -2.8 -0.38 2.00 0.23 0.20 25.5
1461 v PT -0.1 -2.5 -3.0 -0.38 1.99 0.23 0.26 27.1
1461 n PT -0.1 -2.5 -3.0 -0.38 1.99 0.23 0.26 20.3
1463 v PT -0.1 -2.6 -3.2 -0.38 1.97 0.23 0.34 21.3
A049 v Elb -0.1 -3.2 -3.9 -0.38 1.92 0.23 0.70 27.7
A049 m Elb -0.1 -3.6 -4.1 -1.56 1.12 0.41 0.81 48.0
A049 n Elb -0.2 -3.9 -3.9 -1.80 0.59 0.40 0.86 32.2
1467 v PT -0.8 -4.8 -2.1 -1.49 0.59 0.40 0.61 26.6
1467 n PT -0.8 -4.8 -2.1 -1.49 0.59 0.40 0.61 5.4
1469 v PT -1.0 -5.1 -1.3 -0.68 0.59 0.40 0.55 5.4
1469 n PT -1.0 -5.1 -1.3 -0.68 0.59 0.40 0.55 25.1
1471 v Elb -1.4 -5.5 0.6 -0.37 0.59 0.40 0.64 26.6
1471 m Elb -1.2 -5.5 0.9 -0.55 0.38 0.15 0.74 43.1
1471 n Elb -0.9 -5.2 0.9 -0.45 0.48 -0.15 0.71 26.3
S79 v AR 0.8 -3.7 -0.0 -0.45 0.39 -0.15 0.50 22.5
S79 n AR 0.8 -3.7 -0.0 -0.39 1.10 -0.15 0.50 22.5
1475 v Elb 3.3 -1.2 -1.8 -0.39 0.84 -0.15 0.41 21.1
1475 m Elb 3.6 -0.8 -1.8 -0.84 0.30 -0.09 0.49 31.7
1475 n Elb 3.8 -0.6 -1.6 -0.76 0.40 0.01 0.49 22.2
1477 v Elb 4.4 0.8 2.5 -0.32 0.40 0.01 0.12 17.9
1477 m Elb 4.6 1.0 2.8 -0.48 0.11 0.01 0.15 19.4
1477 n Elb 4.9 1.3 2.9 -0.39 0.27 0.01 0.14 18.0
S80 v HR 13.0 9.3 0.1 -0.39 0.63 0.01 0.75 26.8
S80 n HR 13.0 9.3 0.1 -0.37 0.99 0.01 0.75 26.8
S71 v PT 17.6 12.2 -3.3 -0.37 0.49 0.01 0.74 26.6
1481 v Elb 19.3 12.7 -4.1 -0.37 0.32 0.01 0.98 32.1
1481 m Elb 19.6 12.8 -4.1 -0.45 0.13 -0.37 0.93 52.3
1481 n Elb 19.7 12.9 -3.7 -0.23 0.38 -0.53 0.81 31.4
1483 v Elb 17.5 13.5 -0.4 0.13 0.38 -0.53 0.39 23.8
1483 m Elb 17.2 13.4 -0.1 0.04 0.41 -0.15 0.61 36.6
1483 n Elb 16.8 13.1 0.1 -0.10 0.42 0.30 0.52 23.4
S82 v AR 15.2 11.5 -0.0 -0.10 0.52 0.30 0.45 22.3
S82 n AR 15.2 11.5 -0.0 -0.29 0.67 0.30 0.45 22.4
1487 v Elb 10.7 7.8 -0.6 -0.29 0.28 0.30 0.30 20.5
1487 m Elb 10.2 7.6 -0.8 -0.12 0.36 0.42 0.07 20.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 182
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1487 n Elb 9.8 7.9 -1.3 0.12 0.34 0.31 0.27 20.3
1489 v Elb 9.4 8.4 -2.0 0.12 0.32 0.31 0.24 20.1
1489 m Elb 8.9 8.7 -2.5 -0.12 0.31 0.39 0.08 20.1
1489 n Elb 8.4 8.6 -2.6 -0.29 0.14 0.22 0.34 20.5
S83 v AR 0.0 1.0 -0.0 -0.29 0.74 0.22 0.72 26.9
S83 n AR 0.0 1.0 -0.0 -1.53 0.53 0.22 0.72 27.4
S83 -~443 -3.6 -9.4 -0.7 -1.53 0.58 0.22 0.79 29.2
1493 v Elb -3.5 -9.4 -0.7 -1.53 0.58 0.22 0.79 29.2
1493 m Elb -3.3 -9.7 -0.5 -1.08 1.25 0.67 0.51 36.1
1493 n Elb -3.0 -9.7 0.2 0.00 1.66 0.78 0.21 28.8
1495 v PT -3.0 -9.7 0.2 0.00 1.66 -0.78 0.21 28.8
1495 n PT -3.0 -9.7 0.2 0.00 1.66 0.78 0.21 28.8
1497 v Elb -3.0 -9.7 0.2 0.00 1.66 0.78 0.21 28.8
1497 m Elb -2.6 -9.7 1.0 -1.08 1.28 0.61 0.54 36.5
1497 n Elb -2.4 -9.9 1.0 -1.53 0.72 0.02 0.89 30.8
S84 v AR -2.0 -10.7 -0.0 -1.53 0.81 0.02 1.13 36.9
S84 n AR -2.0 -10.7 -0.0 -0.69 1.74 0.02 1.13 36.6
1501 v Elb -0.4 -14.4 -5.9 -0.69 1.35 0.02 1.01 33.5
1501 m Elb -0.6 -14.8 -6.1 -1.41 0.48 0.21 1.11 61.6
1501 n Elb -1.3 -15.2 -5.9 -1.26 0.73 0.29 1.07 36.3
1503 v Elb -18.2 -16.1 0.4 -0.58 0.73 0.29 0.80 29.4
1503 m Elb -18.7 -16.3 0.6 -0.88 0.26 -0.21 0.88 50.1
1503 n Elb -18.5 -16.7 0.6 -0.69 0.56 -0.61 0.67 30.0
S85 v AR -17.3 -17.5 -0.0 -0.69 0.48 -0.61 0.60 28.4
S85 n AR -17.3 -17.5 -0.0 -0.57 1.05 -0.61 0.60 29.3
1507 v Elb -13.7 -19.6 -1.7 -0.57 0.84 -0.61 0.72 31.1
1507 m Elb -13.3 -19.9 -1.8 -0.92 0.37 0.07 0.99 55.2
1507 n Elb -13.4 -20.2 -1.6 -0.69 0.68 0.73 0.71 32.6
1509 v Elb -13.7 -20.4 -1.2 -0.65 0.68 0.73 0.73 33.0
1509 m Elb -13.8 -20.3 -0.8 -0.69 0.60 0.42 0.93 52.7
1509 n Elb -13.6 -19.6 -0.6 -0.36 0.82 -0.09 0.93 31.2
S86 v AR -7.8 -2.0 -0.0 -0.36 0.58 -0.09 0.63 24.7
S86 n AR -7.8 -2.0 -0.0 -0.62 0.34 -0.09 0.63 24.8
S87 v AR 0.2 15.0 -0.0 -0.62 0.54 -0.09 0.96 32.0
S87 n AR 0.2 15.0 -0.0 -0.62 0.28 -0.09 0.96 31.9
1513 v Elb 1.0 16.0 -0.1 -0.62 0.27 -0.09 1.03 33.7
1513 m Elb 1.4 16.2 -0.2 -0.63 0.25 -0.34 0.98 54.8
1513 n Elb 1.6 15.9 -0.2 -0.26 0.62 -0.40 0.90 32.2
S88 v AR 2.0 10.8 -0.0 -0.26 0.88 -0.40 0.66 27.3
S88 n AR 2.0 10.8 -0.0 -0.88 0.95 -0.40 0.66 27.7
1517 v Elb 2.3 8.4 -0.6 -0.88 0.69 -0.40 0.43 23.2
1517 m Elb 2.5 8.1 -0.9 -0.72 0.83 -0.41 0.40 29.2
1517 n Elb 2.8 8.1 -1.3 -0.14 1.07 -0.24 0.42 21.6
1519 v Elb 4.9 9.3 -4.4 -0.14 0.96 -0.24 0.42 21.6
1519 m Elb 5.3 9.3 -4.8 -0.72 0.63 -0.08 0.57 35.0
1519 n Elb 5.5 9.0 -5.0 -0.88 0.34 0.15 0.60 24.4
S89 v AR 2.0 -1.0 -0.0 -0.88 0.77 0.15 0.55 23.6
S89 n AR 2.0 -1.0 -0.0 -0.62 0.25 0.15 0.55 23.4
1521 v Elb 0.6 -3.4 1.0 -0.62 0.26 0.15 0.60 24.3
1521 m Elb 0.2 -3.6 1.1 -0.59 0.33 -0.29 0.56 35.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 183
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1521 n Elb -0.1 -3.5 1.3 -0.22 0.65 -0.58 0.24 23.3
1523 v Elb -2.0 -2.0 2.2 -0.22 0.74 -0.58 0.47 26.2
1523 m Elb -2.3 -1.7 2.2 -0.46 0.64 -0.62 0.45 33.0
1523 n Elb -2.5 -1.5 1.9 -0.47 0.66 -0.36 0.64 26.4
~459 -~721 -2.5 2.5 -6.2 -1.35 0.66 -0.36 1.42 45.6
9507 v Elb -1.6 2.3 -6.2 -1.35 0.66 -0.36 1.42 45.6
9507 m Elb -1.6 2.0 -6.4 -1.41 0.58 -0.44 1.40 76.9
9507 n Elb -1.5 1.6 -6.2 -0.62 1.43 -0.28 1.32 42.5
A004 v PT -1.2 0.8 -5.0 -0.62 1.52 -0.28 0.89 32.1
1529 v PT -0.8 -0.4 -3.0 -0.62 1.64 -0.28 0.23 20.3
1529 n PT -0.8 -0.4 -3.0 -0.62 1.64 -0.28 0.23 20.3
1531 v PT -0.6 -0.6 -2.5 -0.62 1.68 -0.28 0.14 19.6
1531 n PT -0.6 -0.6 -2.5 -0.62 1.89 -0.28 0.14 20.0
1533 v PT -0.5 -0.9 -2.0 -0.62 1.92 -0.28 0.24 20.9
1533 n PT -0.5 -0.9 -2.0 -0.62 1.92 -0.28 0.24 20.9
A031 v Elb -0.2 -1.7 -0.6 -0.62 2.01 -0.28 0.80 30.5
A031 m Elb 0.0 -1.8 0.0 1.00 1.89 -0.18 1.06 58.9
A031 n Elb 0.2 -1.6 0.4 2.06 0.66 0.02 1.22 39.7
A034 v PT 0.2 -1.6 0.5 2.07 0.66 0.02 1.23 39.8
A034 n PT 0.2 -1.6 0.5 -1.43 0.55 0.02 1.05 34.7
1537 v Elb 2.8 0.4 6.5 -0.79 0.55 0.02 0.47 21.9
1537 m Elb 2.7 0.3 6.8 -0.75 0.55 0.02 0.47 30.7
1537 n Elb 2.4 0.2 6.9 -0.31 0.85 0.05 0.41 20.8
1539 v Elb 0.3 -0.9 6.5 -0.31 0.66 0.05 0.41 20.9
1539 m Elb -0.0 -1.0 6.3 0.10 0.70 0.35 0.33 25.9
1539 n Elb -0.1 -1.0 6.0 0.42 0.55 0.48 0.19 21.4
1541 v PT -0.0 -1.1 5.5 0.36 0.55 0.48 0.27 22.0
1543 v PT -0.0 -1.1 5.2 0.33 0.55 0.48 0.32 22.5
1545 v PT -0.0 -1.1 5.0 0.31 0.55 0.48 0.36 22.9
1545 n PT -0.0 -1.1 5.0 0.31 0.55 0.48 0.36 21.2
1547 v PT -0.0 -1.1 4.8 0.28 0.55 0.48 0.39 21.2
A083 v EM -0.0 -1.1 4.8 0.27 0.55 0.48 0.39 21.2
A083 n EM -0.0 -1.1 4.8 0.09 0.55 0.48 0.39 21.2
N5 v ZE -0.0 -1.1 4.6 0.04 0.55 0.48 0.44 21.3
N5 n PT -0.0 -1.1 4.6 0.04 0.55 0.48 0.44 3.7
9129 v PT 0.0 -1.1 1.7 -0.31 0.55 0.48 1.00 6.3

L i n e 11

1447 n PT -0.0 -0.5 -0.5 0.16 0.00 0.00 0.00 8.2

1551 v PT -0.0 -0.1 -0.9 0.15 0.00 0.00 0.00 8.2
1551 n PT -0.0 -0.1 -0.9 0.15 0.00 0.00 0.00 2.9
1553 v PT 0.0 0.0 -1.1 0.00 0.00 0.00 0.00 2.9

L i n e 12

1329 n PT 0.9 0.3 -0.3 0.11 0.00 0.00 0.00 9.5

1571 v PT 0.9 0.3 -0.7 0.10 0.00 0.00 0.00 9.5
1571 n PT 0.9 0.3 -0.7 0.10 0.00 0.00 0.00 3.3
1573 v PT 0.9 0.3 -0.9 0.00 0.00 0.00 0.00 3.3
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 184
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 13

1145 n PT -0.3 0.1 1.8 -0.06 0.00 0.00 0.00 9.7

1143 v PT -0.1 0.2 2.1 -0.05 0.00 0.00 0.00 9.7
1143 n PT -0.1 0.2 2.1 -0.05 0.00 0.00 0.00 3.2
1141 v PT 0.0 0.2 2.3 0.00 0.00 0.00 0.00 3.2

L i n e 14

1731 n PT -2.0 1.9 -0.2 -0.06 0.03 0.00 0.01 12.6

1761 v PT -2.3 1.9 0.2 -0.06 0.03 0.00 0.00 10.4
1759 v Elb -2.7 1.9 0.9 -0.05 0.03 0.00 0.00 10.9
1759 m Elb -2.8 1.8 0.9 -0.05 0.01 0.00 0.00 11.0
1759 n Elb -2.7 1.8 0.9 -0.03 0.04 -0.00 0.00 10.7
1757 v PT -2.4 0.9 0.9 -0.03 0.03 -0.00 0.01 11.8
1757 n PT -2.4 0.9 0.9 -0.03 0.03 -0.00 0.01 3.2
1755 v PT -2.3 0.8 0.9 -0.03 0.03 -0.00 0.01 3.2
1755 n PT -2.3 0.8 0.9 -0.03 0.03 -0.00 0.01 11.8
1753 v Elb -1.9 -0.0 0.9 -0.03 0.04 -0.00 0.00 10.7
1753 m Elb -1.9 -0.1 0.9 -0.05 0.01 0.00 0.00 11.0
1753 n Elb -1.8 -0.1 0.8 -0.05 0.03 0.00 0.00 10.9
1751 v PT -1.4 -0.1 0.2 -0.06 0.03 0.00 0.00 10.4
1725 v PT -1.2 -0.1 -0.2 -0.07 0.03 0.00 0.01 12.6

L i n e 15

1531 n PT -0.6 -0.6 -2.5 -0.21 0.00 0.00 0.00 18.1

1557 v PT -0.6 -0.2 -2.2 -0.20 0.00 0.00 0.00 18.1
1557 n PT -0.6 -0.2 -2.2 -0.20 0.00 -0.00 0.00 18.1
A042 v EM -0.6 -0.2 -2.2 -0.20 0.00 -0.00 0.00 18.1
A042 n EM -0.6 -0.2 -2.2 -0.16 0.00 -0.00 0.00 18.1
1559 v PT -0.6 0.1 -2.0 -0.15 0.00 -0.00 0.00 18.1
1559 n PT -0.6 0.1 -2.0 -0.15 0.00 -0.00 0.00 4.3
1561 v EM -0.4 1.2 -1.4 -0.02 0.00 -0.00 0.00 4.3

L i n e 16

A034 n PT 0.2 -1.6 0.5 -3.50 1.07 -0.00 0.18 0.0

S90 v AR 0.0 -2.0 -0.0 -3.50 1.07 -0.00 0.00 0.0

L i n e 17

9129 n PT 0.0 -1.1 1.7 0.87 70.72 -0.64 53.21 5.6

9125 v PT 0.0 -3.6 1.7 0.87 30.34 -0.64 4.96 2.0
9125 n PT 0.0 -3.6 1.7 -0.14 26.86 -0.30 7.82 1.8
9131 v PT 0.0 -3.6 1.7 -0.14 26.81 -0.30 7.79 1.8
9131 n PT 0.0 -3.6 1.7 0.00 24.49 0.00 7.09 1.6
9127 v EM 0.0 -5.2 1.7 0.00 0.00 0.00 0.00 0.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 185
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 18

9129 n PT 0.0 -1.1 1.7 0.42 71.03 0.05 52.49 5.5

9997 v PT -0.0 0.0 1.8 0.42 88.16 0.05 84.73 7.6
9997 n PT -0.0 0.0 1.8 -45.66 53.80 -4.74 113.78 8.4
9998 v PT -0.0 7.1 1.6 -45.66 58.63 -4.74 119.51 8.8
9998 n PT -0.0 7.1 1.6 -0.94 85.72 -1.67 89.99 7.7
9137 v PT -0.0 8.6 1.5 -0.94 60.98 -1.67 47.09 4.9
9137 n PT -0.0 8.6 1.5 -0.00 62.69 0.00 46.45 4.9
9135 v EM -0.0 12.6 1.3 -0.00 0.00 0.00 0.00 0.0

L i n e 19

9125 n PT 0.0 -3.6 1.7 3.46 1.14 0.71 2.86 8.7

N1 v PT 0.0 -3.6 -1.1 2.92 1.14 0.71 2.01 6.4
N1 n ZE 0.0 -3.6 -1.1 2.92 1.14 0.71 2.01 17.9
1801 v PT -0.2 -3.9 -3.0 1.50 1.14 0.71 1.67 16.2
1803 v PT -0.2 -3.9 -3.2 1.12 1.14 0.71 1.69 16.2
1805 v Elb -0.2 -3.9 -3.2 1.12 1.14 0.71 1.69 16.2
1805 m Elb -0.3 -3.9 -3.6 -0.04 1.49 1.69 0.78 19.3
1805 n Elb -0.3 -3.6 -3.8 -1.01 0.95 1.77 0.55 15.6
1807 v Elb 0.3 0.8 -4.9 -1.01 1.27 1.77 0.99 16.7
1807 m Elb 0.2 1.2 -4.8 -1.09 1.36 1.66 1.15 23.6
1807 n Elb -0.2 1.2 -4.3 -0.54 1.80 0.82 1.55 15.9
S218 v AR -2.8 0.3 -0.0 -0.54 2.82 0.82 2.07 18.4
S218 n AR -2.8 0.3 -0.0 0.54 1.33 0.82 2.07 17.8
1811 v Elb -3.2 0.2 0.5 0.54 1.23 0.82 1.99 17.4
1811 m Elb -3.7 0.0 0.8 0.86 0.90 1.38 1.62 29.4
1811 n Elb -4.2 -0.1 0.6 0.50 1.04 1.29 1.74 17.3
1813 v Elb -5.6 -1.2 -1.8 -0.57 1.04 1.29 2.57 20.8
1813 m Elb -5.6 -1.3 -2.0 -0.81 0.93 1.51 2.52 42.5
1813 n Elb -5.5 -1.3 -2.2 -0.90 0.90 1.54 2.51 21.1
1815 v Elb -2.5 -2.3 -3.3 -1.80 1.36 1.54 2.03 19.5
1815 m Elb -2.3 -2.4 -3.3 -1.30 1.94 1.97 1.54 29.2
1815 n Elb -2.1 -2.5 -3.2 -0.54 2.35 2.15 1.08 19.0
1817 v Elb -1.7 -2.6 -2.9 -0.54 2.48 2.15 0.68 18.4
1817 m Elb -1.3 -2.5 -2.4 -1.01 2.50 1.29 1.50 27.7
1817 n Elb -1.1 -2.2 -2.0 -0.89 2.72 0.12 1.42 14.8
1819 v PT -1.1 -2.2 -2.0 -0.89 2.72 0.12 1.42 14.8
1819 n PT -1.1 -2.2 -2.0 -0.89 2.72 0.12 1.42 14.8
1821 v PT -1.1 -2.0 -1.9 -0.89 3.09 0.12 1.08 13.8
1821 n PT -1.1 -2.0 -1.9 -0.89 3.09 0.12 1.08 3.3
1823 v PT -1.1 -2.0 -1.9 -0.89 3.10 0.12 1.04 3.3
1825 v PT -1.1 -1.9 -1.9 -0.89 3.11 0.12 0.99 3.3
1825 n PT -1.1 -1.9 -1.9 -0.89 3.11 0.12 0.99 13.5
D027 v Elb -1.0 -1.2 -1.3 -0.89 3.72 0.12 0.58 12.6
D027 m Elb -0.8 -0.9 -0.9 -1.01 3.86 -0.66 1.31 24.4
D027 n Elb -0.4 -0.8 -0.5 -0.54 4.12 -1.74 1.32 19.4
D025 v PT -0.4 -0.8 -0.5 -0.54 4.12 -1.75 1.31 19.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 186
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

D025 n PT -0.4 -0.8 -0.5 -0.54 4.12 -1.74 1.32 19.4

C943 v PT -0.1 -0.8 -0.3 -0.54 4.17 -1.74 2.06 21.7

L i n e 20

C943 n PT -0.1 -0.8 -0.3 -0.58 2.43 -0.65 0.99 14.1

C941 v PT -0.1 -1.1 -0.4 -0.58 2.30 -0.65 1.25 14.8
C941 n PT -0.1 -1.1 -0.4 -0.20 2.36 -0.77 1.19 31.4
C047 v PT -0.1 -1.2 -0.4 -0.21 2.31 -0.77 1.33 31.6
C047 n PT -0.1 -1.2 -0.4 -0.21 2.31 -0.77 1.33 27.4
C045 v PT -0.1 -1.3 -0.5 -0.21 2.27 -0.77 1.48 28.1
C045 n PT -0.1 -1.3 -0.5 -0.58 2.21 -0.67 1.53 28.3
A089 v EM -0.1 -1.3 -0.5 -0.58 2.20 -0.67 1.53 28.3
A089 n EM -0.1 -1.3 -0.5 -0.58 2.02 -0.66 1.53 28.3
C043 v PT -0.1 -1.4 -0.5 -0.58 1.97 -0.66 1.69 29.2
C043 n PT -0.1 -1.4 -0.5 -0.58 1.97 -0.66 1.69 6.8
C041 v PT -0.2 -2.0 -0.7 -0.58 0.56 -0.66 2.11 6.7
C039 v PT -0.2 -2.6 -0.8 -0.58 1.07 -0.66 1.95 6.7
C039 n PT -0.2 -2.6 -0.8 -0.58 1.07 -0.66 1.95 30.7
A088 v EM -0.2 -2.7 -0.8 -0.58 1.12 -0.66 1.84 30.0
A088 n EM -0.2 -2.7 -0.8 -0.58 1.29 -0.67 1.84 30.0
C037 v PT -0.2 -2.7 -0.8 -0.58 1.30 -0.67 1.84 30.0
C037 n PT -0.2 -2.7 -0.8 -0.81 1.17 -0.71 1.82 30.1
C035 v PT -0.2 -2.8 -0.8 -0.81 1.20 -0.71 1.74 29.6
C035 n PT -0.2 -2.8 -0.8 -0.81 1.20 -0.71 1.74 57.1
C033 v PT -0.2 -2.9 -0.8 -0.82 1.22 -0.71 1.66 55.1
C033 n PT -0.2 -2.9 -0.8 -0.58 1.35 -0.67 1.67 55.1
9031 v EM -0.2 -2.9 -0.8 -0.58 1.35 -0.67 1.67 55.0
9031 n EM -0.2 -2.9 -0.8 -0.58 1.46 -0.67 1.67 55.1
C031 v PT -0.2 -3.0 -0.8 -0.58 1.48 -0.67 1.55 52.1
C031 n PT -0.2 -3.0 -0.8 -0.58 1.48 -0.67 1.55 9.9
C029 v PT -0.2 -3.5 -0.6 -0.58 2.34 -0.67 0.83 7.1
C029 n PT -0.2 -3.5 -0.6 -0.58 2.34 -0.67 0.83 37.5
9029 v EM -0.2 -3.7 -0.6 -0.58 2.36 -0.67 0.63 34.2
9029 n EM -0.2 -3.7 -0.6 -0.58 2.47 -0.67 0.63 34.3
C027 v PT -0.2 -3.7 -0.6 -0.58 2.47 -0.67 0.63 34.3
C027 n PT -0.2 -3.7 -0.6 -0.11 2.53 -0.65 0.65 34.2
C025 v PT -0.2 -3.7 -0.5 -0.10 2.55 -0.65 0.47 31.7
C025 n PT -0.2 -3.7 -0.5 -0.10 2.55 -0.65 0.47 24.3
9199 v PT -0.2 -3.8 -0.4 -0.10 2.59 -0.65 0.29 24.0
9199 n PT -0.2 -3.8 -0.4 -0.58 2.52 -0.66 0.26 24.0
9193 v Elb -0.2 -4.2 -0.2 -0.58 2.64 -0.66 0.36 24.1
9193 m Elb -0.2 -4.3 -0.1 0.48 2.71 -0.65 0.61 27.5
9193 n Elb -0.2 -4.3 -0.0 1.51 2.35 -0.55 0.89 25.4
SE60 v AR -0.2 -4.3 -0.0 1.51 2.35 -0.55 0.89 25.4
SE60 n AR -0.2 -4.3 -0.0 -0.64 1.67 -0.56 0.89 25.3
9191 v Elb -0.2 -4.3 -0.0 -0.64 1.67 -0.55 0.89 25.3
9191 m Elb -0.2 -4.4 0.1 -1.18 1.30 -0.38 0.86 30.4
9191 n Elb -0.2 -4.4 0.2 -1.52 0.78 -0.16 0.84 24.8
C017 v Elb -0.0 -4.4 2.2 -0.77 0.78 -0.16 0.49 23.8
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 187
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

C017 m Elb 0.0 -4.2 2.4 -0.99 0.30 -0.04 0.57 26.5
C017 n Elb 0.1 -4.0 2.5 -0.71 0.66 0.07 0.50 23.7
C015 v PT 0.1 -3.0 2.0 -0.71 0.37 0.07 0.23 23.3
C013 v PT 0.2 -2.6 1.8 -0.71 0.33 0.07 0.27 23.4
C011 v PT 0.2 -2.2 1.6 -0.71 0.71 0.07 0.42 23.6
SE59 v AR -0.0 0.0 -0.0 -0.71 1.66 0.07 2.36 32.9
SE59 n AR -0.0 0.0 -0.0 -0.15 2.07 0.07 2.36 32.7
C007 v Elb -1.2 2.8 -4.0 -0.15 1.09 0.07 0.87 24.7
C007 m Elb -1.2 3.0 -4.4 -0.39 0.94 0.73 0.73 29.0
C007 n Elb -1.0 3.2 -4.5 -0.41 0.85 1.09 0.16 25.0
C005 v PT -0.8 3.3 -4.5 -0.41 0.78 1.09 0.25 25.1
B929 v PT -0.6 3.4 -4.6 -0.41 0.74 1.09 0.35 25.2

L i n e 21

9197 n PT -1.7 -0.5 -0.6 0.00 0.00 0.00 0.00 23.2

SE58 v AR -1.0 0.0 -0.0 0.00 0.25 0.00 0.06 23.2
SE58 n AR -1.0 0.0 -0.0 -0.89 0.44 0.00 0.06 23.2
B907 v Elb 2.3 2.0 2.8 -0.89 0.92 0.00 0.96 25.1
B907 m Elb 2.5 2.0 2.9 -1.17 0.58 0.25 0.99 32.3
B907 n Elb 2.6 2.0 2.8 -1.31 0.27 0.47 0.94 25.5
SE57 v AR 2.6 2.0 2.8 -1.31 0.26 0.47 0.94 25.5
SE57 n AR 2.6 2.0 2.8 -1.31 0.47 0.47 0.94 25.5
B911 v Elb 2.6 2.0 2.8 -1.31 0.47 0.47 0.94 25.5
B911 m Elb 2.7 1.9 2.8 -1.30 0.59 0.63 0.85 30.7
B911 n Elb 2.8 1.8 2.7 -1.10 0.96 0.72 0.74 25.1
B913 v Elb 2.9 0.5 1.6 -1.50 0.96 0.72 0.46 24.5
B913 m Elb 2.9 0.1 1.5 -1.45 1.17 0.52 0.59 27.2
B913 n Elb 2.8 -0.2 1.7 -0.45 1.88 0.13 0.55 23.9
B915 v PT 2.5 -1.0 2.9 -0.45 2.14 0.13 0.84 24.7
B917 v Elb 2.4 -1.3 3.3 -0.45 2.24 0.13 1.29 26.5
B917 m Elb 2.4 -1.6 3.6 -0.92 2.18 1.14 1.18 36.5
B917 n Elb 2.6 -1.7 3.6 -0.85 2.30 1.77 0.43 28.6
B921 v Elb 2.6 -1.7 3.6 -0.85 2.30 1.77 0.43 28.6
B921 m Elb 2.7 -1.8 3.4 -2.25 1.15 1.12 1.50 42.4
B921 n Elb 2.7 -1.8 3.1 -2.43 0.96 -0.13 1.81 29.8
SE56 v AR 0.0 0.0 -0.0 -3.60 0.96 -0.13 1.41 27.8
SE56 n AR 0.0 0.0 -0.0 1.13 0.81 -0.13 1.41 27.2
B925 v Elb -0.8 3.9 -4.5 -0.53 0.81 -0.13 1.64 28.3
B925 m Elb -0.8 3.8 -4.8 -0.91 0.45 -0.26 1.70 44.6
B925 n Elb -0.7 3.6 -4.7 -0.67 0.84 -0.30 1.63 28.4
B927 v PT -0.7 3.6 -4.7 -0.68 0.84 -0.30 1.63 28.4
B927 n PT -0.7 3.6 -4.7 -0.67 0.84 -0.30 1.63 28.4
B929 v PT -0.6 3.4 -4.6 -0.67 0.92 -0.30 1.52 27.8
B929 n PT -0.6 3.4 -4.6 -0.53 0.09 0.04 0.45 23.6
B931 v PT -0.6 3.2 -4.4 -0.53 0.18 0.04 0.43 23.6
B931 n PT -0.6 3.2 -4.4 -0.53 0.18 0.04 0.43 23.6
B933 v PT -0.5 3.1 -4.3 -0.53 0.22 0.04 0.42 23.6
B933 n PT -0.5 3.1 -4.3 -0.53 0.22 0.04 0.42 28.0
B935 v PT -0.5 3.0 -4.2 -0.53 0.23 0.04 0.40 27.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 188
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

SE55 v AR -0.4 0.3 -0.0 -0.53 0.61 0.04 0.48 30.9

SE55 n AR -0.4 0.3 -0.0 -0.73 0.51 0.04 0.48 31.1
B939 v PT -1.4 -1.2 1.1 -0.73 0.28 0.04 0.07 18.3
B941 v PT -1.5 -1.5 1.3 -0.73 0.21 0.04 0.10 18.8
SE54 v AR -2.0 -2.7 1.8 -0.73 0.31 0.04 0.32 24.5
SE54 n AR -2.0 -2.7 1.8 -0.69 0.46 0.04 0.32 24.4
B945 v PT -1.7 -3.6 1.9 -0.69 0.55 0.04 0.67 40.5
B947 v PT -1.6 -3.7 1.9 -0.69 0.56 0.04 0.71 42.4
B947 n PT -1.6 -3.7 1.9 -0.69 0.56 0.04 0.71 24.3
B949 v PT -1.6 -3.8 1.9 -0.69 0.58 0.04 0.75 24.4
B949 n PT -1.6 -3.8 1.9 -0.69 0.59 0.04 0.75 24.4
B951 v Elb -1.6 -3.8 1.9 -0.69 0.58 0.04 0.75 24.4
B951 m Elb -1.2 -4.0 1.9 -0.75 0.58 0.37 0.72 28.5
B951 n Elb -0.9 -3.8 2.0 -0.38 0.93 0.55 0.55 24.3
B953 v Elb -0.2 -2.7 2.4 -0.38 1.13 0.55 0.53 24.2
B953 m Elb 0.1 -2.3 2.4 -0.97 0.81 0.32 0.74 28.8
B953 n Elb 0.2 -2.0 2.2 -1.08 0.79 -0.00 0.75 24.4
B955 v Elb 0.2 -0.2 0.1 -1.84 0.79 -0.00 0.66 24.3
B955 m Elb 0.1 -0.1 0.0 -1.48 1.41 0.01 0.75 28.9
B955 n Elb 0.0 -0.0 -0.0 -0.88 1.89 0.02 0.90 24.9
SE53 v AR 0.0 -0.0 -0.0 -0.88 1.89 0.02 0.90 24.9
SE53 n AR 0.0 -0.0 -0.0 0.85 0.87 0.01 0.90 24.9
B959 v Elb 0.0 -0.0 -0.0 0.85 0.87 0.02 0.90 24.9
B959 m Elb -0.2 0.1 -0.1 0.44 1.09 0.01 0.81 29.4
B959 n Elb -0.4 0.2 -0.0 -0.01 1.13 -0.00 0.71 24.2
B963 v PT -0.9 0.6 0.0 -0.01 1.00 -0.00 0.44 23.6
B963 n PT -0.9 0.6 0.0 0.26 0.97 0.00 0.44 23.6
B965 v PT -1.0 0.7 -0.0 0.25 0.93 0.00 0.37 23.5
B965 n PT -1.0 0.7 -0.0 0.25 0.93 0.00 0.37 26.1
B967 v PT -1.2 0.8 -0.0 0.25 0.92 0.00 0.31 23.7
B967 n PT -1.2 0.8 -0.0 -0.01 0.95 0.00 0.31 23.5
A050 v EM -1.2 0.8 -0.0 -0.01 0.95 0.00 0.31 23.5
A050 n EM -1.2 0.8 -0.0 -0.01 0.88 0.00 0.31 23.5
B969 v PT -1.4 0.9 -0.0 -0.01 0.87 0.00 0.24 21.4
B969 n PT -1.4 0.9 -0.0 -0.01 0.87 0.00 0.24 5.0
B971 v PT -2.0 1.3 -0.0 -0.01 0.30 0.00 0.05 5.0
B971 n PT -2.0 1.3 -0.0 -0.01 0.30 0.00 0.05 17.8
A051 v EM -2.2 1.4 -0.0 -0.01 0.28 0.00 0.02 17.7
A051 n EM -2.2 1.4 -0.0 -0.01 0.22 0.00 0.02 17.7
B973 v PT -2.2 1.4 -0.0 -0.01 0.22 0.00 0.02 17.7
B973 n PT -2.2 1.4 -0.0 -0.07 0.21 -0.00 0.02 17.7
B975 v PT -2.4 1.5 -0.0 -0.07 0.19 -0.00 0.01 17.7
B975 n PT -2.4 1.5 -0.0 -0.07 0.19 -0.00 0.01 23.2
B977 v PT -2.5 1.6 0.0 -0.06 0.16 -0.00 0.00 23.2
B977 n PT -2.5 1.6 0.0 -0.01 0.17 -0.00 0.00 23.2
A052 v EM -2.5 1.6 0.0 -0.01 0.17 -0.00 0.00 23.2
A052 n EM -2.5 1.6 0.0 -0.01 0.03 -0.00 0.00 23.2
SE52 v AR -2.7 1.8 -0.0 -0.01 0.07 -0.00 0.00 23.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 189
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 22

9137 n PT -0.0 8.6 1.5 -1.71 0.99 1.17 1.79 12.1

N6 v PT 0.0 8.5 -1.3 -2.06 0.99 1.17 2.05 13.4
N6 n ZE 0.0 8.5 -1.3 -2.06 1.00 1.18 2.05 29.2
1651 v Elb 0.1 8.5 -1.5 -2.30 1.00 1.18 2.10 29.6
1651 m Elb 0.4 8.5 -1.8 -1.92 1.74 1.22 1.98 48.7
1651 n Elb 0.8 8.4 -1.7 -0.32 2.66 0.67 1.84 26.2
1647 v PT 0.8 8.4 -1.7 -0.32 2.66 0.67 1.84 26.2
1647 n PT 0.8 8.4 -1.7 -0.79 2.56 0.84 1.77 26.3
1645 v PT 1.0 8.3 -1.6 -0.79 2.59 0.84 1.58 25.1
1645 n PT 1.0 8.3 -1.6 -0.79 2.59 0.84 1.58 55.0
1643 v PT 1.2 8.3 -1.5 -0.80 2.61 0.84 1.40 50.8
1643 n PT 1.2 8.3 -1.5 -0.32 2.71 0.70 1.48 50.6
1641 v PT 1.4 8.2 -1.3 -0.32 2.73 0.70 1.26 45.4
1641 n PT 1.4 8.2 -1.3 -0.32 2.89 0.72 1.26 46.0
9500 v Elb 2.3 7.7 -0.4 -0.32 2.99 0.72 0.39 30.8
9500 m Elb 2.5 7.5 0.0 1.81 2.45 0.28 0.78 44.8
9500 n Elb 2.4 7.3 0.4 2.91 0.99 -0.25 0.79 29.1
9567 v PT 2.3 7.3 0.4 2.92 0.99 -0.25 0.79 29.0
9567 n PT 2.3 7.3 0.4 -5.05 0.50 0.00 0.09 0.0
S77 v AR 2.7 7.6 -0.0 -5.05 0.50 0.00 0.00 0.0

L i n e 23

1641 n PT 1.4 8.2 -1.3 0.17 0.00 -0.00 0.02 15.7

1657 v Elb 1.7 8.2 -1.6 0.16 0.00 0.00 0.02 15.6
1657 m Elb 1.8 8.2 -1.7 0.11 0.11 -0.00 0.02 14.6
1657 n Elb 1.8 8.3 -1.7 -0.00 0.16 -0.00 0.02 12.0
1659 v PT 1.9 8.5 -1.8 -0.00 0.15 -0.00 0.01 7.2
1659 n PT 1.9 8.5 -1.8 -0.00 0.15 -0.00 0.01 2.4
1661 v PT 2.0 8.7 -1.8 -0.00 0.00 -0.00 0.00 2.3

L i n e 24

9567 n PT 2.3 7.3 0.4 -2.13 0.49 -0.25 0.83 29.2

S76 v AR 2.0 -0.0 7.5 -1.28 0.49 -0.25 1.22 38.5
S76 n AR 2.0 -0.0 7.5 -1.18 0.59 -0.25 1.22 38.5
1633 v Elb 2.2 -0.2 7.7 -1.15 0.59 -0.25 1.25 39.4
1633 m Elb 2.6 -0.5 7.8 -0.76 1.01 -0.75 1.02 58.3
1633 n Elb 3.0 -0.9 7.5 0.03 1.23 -0.87 0.82 36.3
1631 v Elb 4.9 -3.8 3.9 0.03 1.04 -0.87 0.32 28.8
1631 m Elb 5.3 -4.1 3.3 -0.39 0.93 -0.63 0.67 40.5
1631 n Elb 5.8 -4.0 2.9 -0.59 0.78 -0.10 0.85 28.1
1629 v Elb 10.2 2.0 -3.6 -0.59 0.07 -0.10 0.59 21.6
1629 m Elb 10.2 2.3 -3.6 -0.44 0.39 -0.29 0.50 30.7
1629 n Elb 9.9 2.4 -3.2 -0.04 0.59 -0.31 0.42 19.7
1627 v Elb 8.0 2.0 0.4 -0.04 0.64 -0.31 0.21 16.9
1627 m Elb 7.7 2.1 0.8 -0.44 0.48 -0.37 0.13 18.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 190
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1627 n Elb 7.6 2.3 0.9 -0.59 0.31 -0.24 0.31 17.6
S75 v AR 7.4 4.5 -0.0 -0.59 0.58 -0.24 0.18 16.2
S75 n AR 7.4 4.5 -0.0 -0.42 0.61 -0.24 0.18 16.1
1623 v Elb 6.5 10.4 -1.6 -0.42 0.37 -0.24 0.73 25.4
1623 m Elb 6.4 10.7 -1.5 -0.13 0.56 0.32 0.72 40.8
1623 n Elb 6.5 10.7 -1.3 0.27 0.53 0.73 0.33 25.0
1621 v Elb 6.9 10.6 -0.7 0.34 0.53 0.73 0.37 25.4
1621 m Elb 6.9 10.4 -0.4 0.04 0.64 0.49 0.66 38.8
1621 n Elb 6.7 10.0 -0.2 -0.32 0.59 0.00 0.81 26.6
S74 v AR 6.0 8.8 -0.0 -0.32 0.65 0.00 0.81 26.5
S74 n AR 6.0 8.8 -0.0 -0.52 0.70 -0.00 0.81 26.6
S74 -S73 6.0 8.8 -0.2 -0.52 0.70 -0.00 0.81 26.6
S73 v AR -1.0 -6.4 -0.0 -0.52 0.22 -0.00 0.22 15.6
S73 n AR -1.0 -6.4 -0.0 -0.21 0.26 -0.00 0.22 15.5
1615 v Elb -5.5 -17.5 0.8 -0.21 0.64 -0.00 0.56 20.7
1615 m Elb -5.7 -18.0 0.7 -0.59 0.39 0.27 0.56 33.3
1615 n Elb -5.8 -18.1 0.4 -0.65 0.34 0.40 0.49 21.9
1613 v Elb -5.6 -17.9 -0.1 -0.72 0.34 0.40 0.45 21.2
1613 m Elb -5.6 -17.6 -0.3 -0.72 0.41 -0.02 0.58 33.7
1613 n Elb -6.0 -17.3 -0.3 -0.26 0.82 -0.40 0.37 20.4
S72 v AR -6.8 -16.8 -0.0 -0.26 0.87 -0.40 0.35 20.3
S72 n AR -6.8 -16.8 -0.0 -0.44 0.27 -0.40 0.35 19.6
1609 v Elb -8.0 -16.1 0.4 -0.44 0.35 -0.40 0.36 19.7
1609 m Elb -8.2 -15.8 0.4 -0.56 0.15 -0.09 0.53 31.4
1609 n Elb -8.1 -15.6 0.2 -0.39 0.46 0.26 0.44 19.5
1607 v Elb -0.2 -13.4 -5.2 -1.04 0.46 0.26 0.78 27.3
1607 m Elb 0.1 -13.1 -5.3 -1.07 0.47 0.14 0.81 45.2
1607 n Elb 0.1 -12.7 -5.1 -0.44 1.12 -0.05 0.72 24.6
S70 v AR -1.6 -9.4 -0.0 -0.44 1.51 -0.05 1.13 35.2
S70 n AR -1.6 -9.4 -0.0 -1.12 0.81 -0.05 1.13 35.5
1603 v Elb -2.2 -8.0 1.5 -1.12 0.64 -0.05 0.68 24.1
1603 m Elb -2.4 -7.8 1.5 -0.81 0.98 0.42 0.46 29.9
1603 n Elb -2.7 -7.8 1.1 -0.02 1.26 0.59 0.20 22.6
1601 v PT -2.7 -7.8 1.1 -0.02 1.26 0.59 0.20 22.6
1601 n PT -2.7 -7.8 1.1 0.03 1.26 -0.59 0.20 22.6
1599 v Elb -2.7 -7.8 1.1 -0.02 1.26 0.59 0.20 22.6
1599 m Elb -3.0 -7.7 0.6 -0.81 0.94 0.47 0.46 30.3
1599 n Elb -3.2 -7.5 0.5 -1.12 0.50 0.13 0.63 23.0
~399 -S69 -3.2 -7.5 0.7 -1.12 0.53 0.13 0.64 23.2
S69 v AR 0.0 1.0 -0.0 -1.12 0.53 0.13 0.64 23.2
S69 n AR 0.0 1.0 -0.0 -0.43 0.76 0.13 0.64 22.9
1595 v Elb 5.6 7.0 -2.8 -0.43 0.12 0.13 0.41 18.4
1595 m Elb 6.0 7.1 -2.7 -0.22 0.38 0.38 0.20 19.9
1595 n Elb 6.4 7.0 -2.4 0.12 0.43 0.41 0.16 17.6
1593 v Elb 6.7 6.6 -1.9 0.12 0.43 0.41 0.21 18.0
1593 m Elb 7.1 6.5 -1.6 -0.22 0.40 0.39 0.27 22.1
1593 n Elb 7.4 6.6 -1.4 -0.43 0.19 0.15 0.45 19.3
S68 v AR 9.9 10.7 -0.0 -0.43 0.65 0.15 0.52 20.4
S68 n AR 9.9 10.7 -0.0 -0.19 0.54 0.15 0.52 20.2
1589 v Elb 10.1 11.3 0.2 -0.19 0.48 0.15 0.55 20.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 191
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1589 m Elb 10.2 11.6 0.2 0.08 0.49 -0.28 0.53 31.9
1589 n Elb 10.5 11.8 -0.1 0.28 0.39 -0.58 0.23 20.8
1587 v Elb 12.2 12.3 -3.1 -0.08 0.39 -0.58 0.64 26.9
1587 m Elb 12.2 12.3 -3.3 -0.32 0.25 -0.52 0.71 41.8
1587 n Elb 11.9 12.1 -3.4 -0.33 0.25 -0.18 0.85 28.1
S81 v PT 9.7 9.4 -2.5 -0.33 0.46 -0.18 0.54 20.8
S67 v HR 5.9 3.7 0.0 -0.33 0.91 -0.18 0.67 24.0
S67 n HR 5.9 3.7 0.0 -0.34 0.65 -0.18 0.67 23.8
1583 v Elb -2.3 -7.9 1.7 -0.34 0.43 -0.18 0.64 23.1
1583 m Elb -2.6 -8.0 1.6 -0.54 0.19 0.31 0.63 36.7
1583 n Elb -2.6 -7.7 1.4 -0.45 0.39 0.63 0.32 22.8
1579 v Elb -2.6 -7.1 0.9 -0.50 0.39 0.63 0.30 22.6
1579 m Elb -2.6 -6.6 0.9 -0.51 0.42 0.32 0.59 35.0
1579 n Elb -2.6 -6.2 1.2 -0.19 0.67 -0.14 0.60 22.0
1577 v PT -1.6 -1.7 7.9 -0.19 1.17 -0.14 1.43 43.2
1577 n PT -1.6 -1.7 7.9 -0.19 1.17 -0.14 1.43 43.2
1341 v PT -1.5 -1.4 8.1 -0.19 1.19 -0.14 1.55 46.5

L i n e 25

1167 n PT 0.2 2.7 -0.0 -0.07 0.03 -0.00 0.01 11.5

1199 v PT 0.4 2.7 0.3 -0.06 0.03 -0.00 0.00 10.1
1197 v Elb 0.7 2.7 1.0 -0.05 0.03 -0.00 0.00 10.9
1197 m Elb 0.7 2.6 1.1 -0.05 0.01 -0.00 0.00 11.0
1197 n Elb 0.6 2.6 1.1 -0.02 0.04 0.00 0.00 10.6
1195 v PT -0.1 1.7 1.0 -0.02 0.03 0.00 0.01 11.9
1195 n PT -0.1 1.7 1.0 -0.02 0.03 0.00 0.01 3.3
1193 v PT -0.3 1.6 1.0 -0.02 0.03 0.00 0.01 3.3
1193 n PT -0.3 1.6 1.0 -0.02 0.03 0.00 0.01 11.9
1191 v Elb -1.1 0.7 1.0 -0.02 0.04 0.00 0.00 10.5
1191 m Elb -1.1 0.7 0.9 -0.05 0.01 -0.00 0.00 10.9
1191 n Elb -1.2 0.7 0.9 -0.05 0.03 -0.00 0.00 10.8
1189 v PT -1.4 0.7 0.2 -0.06 0.03 -0.00 0.00 10.2
1161 v PT -1.5 0.7 -0.2 -0.06 0.03 -0.00 0.01 11.7

L i n e 26

9131 n PT 0.0 -3.6 1.7 -2.31 0.71 0.60 0.73 3.0

N2 v PT 0.0 -3.7 4.5 -1.77 0.71 0.60 0.95 3.4
N2 n ZE 0.0 -3.7 4.5 -1.77 0.71 0.60 0.95 11.9
193 v PT 0.0 -3.7 4.7 -1.38 0.71 0.60 1.00 12.0
197 v Elb 0.0 -3.7 4.7 -1.38 0.71 0.60 1.00 12.0
197 m Elb -0.2 -3.7 5.1 -1.35 0.39 -0.18 1.20 21.7
197 n Elb -0.6 -3.8 5.2 -0.70 1.05 -0.88 0.76 11.7
207 v PT -1.8 -4.2 4.9 -0.70 0.26 -0.88 0.75 11.7
205 v PT -2.3 -4.3 4.8 -0.70 0.31 -0.88 0.79 11.8
205 n PT -2.3 -4.3 4.8 -0.76 0.70 -1.00 0.78 12.0
225 v Elb -3.8 -4.9 4.5 -0.76 1.33 -1.00 1.28 13.8
225 m Elb -4.2 -5.0 4.2 -1.58 0.56 -1.42 1.05 21.0
225 n Elb -4.1 -4.9 3.7 -1.66 0.79 -1.04 1.39 14.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 192
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

201 v Elb -0.9 -1.6 -0.5 -3.40 0.79 -1.04 0.90 12.8
201 m Elb -0.8 -1.1 -0.7 -2.37 2.79 -0.10 1.47 25.9
201 n Elb -1.2 -0.6 -0.5 0.22 3.82 1.03 1.49 16.0
S111 v AR -2.0 -0.0 -0.0 0.22 4.07 1.03 2.59 20.7
S111 n AR -2.0 -0.0 -0.0 -0.66 1.83 1.03 2.59 19.7
209 v Elb -6.5 3.0 1.8 -0.66 1.59 1.03 1.93 16.6
209 m Elb -7.0 3.4 1.8 -0.80 1.56 1.71 1.61 28.8
209 n Elb -7.1 3.5 1.4 -0.65 1.69 1.66 1.56 16.9
223 v Elb -7.1 3.3 0.7 -0.93 1.69 1.66 1.20 15.8
223 m Elb -7.1 3.3 0.6 -1.36 1.41 1.30 1.54 27.4
223 n Elb -7.1 3.3 0.5 -1.69 1.05 0.87 1.78 15.6
221 v PT -7.1 3.3 0.5 -1.69 1.05 0.87 1.78 15.6
211 v Elb -6.8 3.3 0.1 -1.85 0.98 0.87 1.66 15.0
211 m Elb -6.8 3.3 -0.0 -1.65 1.34 1.24 1.37 25.0
211 n Elb -6.7 3.2 -0.2 -1.35 1.69 1.52 1.06 15.0
213 v Elb -6.0 1.1 -3.0 -2.54 1.69 1.52 3.20 24.3
213 m Elb -5.8 0.9 -3.2 -3.02 0.79 1.51 3.33 55.0
213 n Elb -5.5 0.9 -3.2 -3.02 1.05 1.30 3.38 24.6
215 v Elb -0.4 -0.1 -2.2 -3.87 1.80 1.30 1.25 15.4
215 m Elb -0.0 -0.1 -2.0 -2.97 3.17 1.34 0.93 19.6
215 n Elb 0.2 -0.1 -1.7 -1.56 4.15 1.21 0.73 15.0
217 v Elb 0.6 -0.1 -1.0 -1.56 4.29 1.21 0.54 14.8
217 m Elb 1.0 -0.2 -0.3 -0.64 4.68 0.22 2.04 33.9
217 n Elb 1.1 -0.6 0.0 0.66 4.84 -1.68 2.58 23.1
S112 v AR 1.1 -0.9 -0.0 0.66 4.98 -1.68 3.57 27.7
S112 n AR 1.1 -0.9 -0.0 2.16 3.16 -1.68 3.57 27.1
237 v PT 1.2 -2.2 -0.5 2.16 2.33 -1.68 1.47 17.4
237 n PT 1.2 -2.2 -0.5 2.16 2.33 -1.68 1.47 3.6
231 v PT 1.2 -2.3 -0.5 2.16 2.32 -1.68 1.43 3.6
227 v PT 1.2 -2.3 -0.5 2.16 2.30 -1.68 1.39 3.6
227 n PT 1.2 -2.3 -0.5 2.16 2.30 -1.68 1.39 17.2
4765 v PT 1.3 -2.5 -0.6 2.16 1.93 -1.68 1.14 16.1
4765 n PT 1.3 -2.5 -0.6 2.16 1.93 -1.68 1.14 16.1
4767 v Elb 1.3 -2.5 -0.6 2.16 1.93 -1.68 1.14 16.1
4767 m Elb 1.2 -2.7 -0.7 1.89 2.12 -1.93 0.30 15.6
4767 n Elb 1.1 -2.9 -0.9 1.34 2.44 -1.79 0.82 16.0
4771 v Elb 0.7 -3.4 -1.7 1.34 2.25 -1.80 1.56 17.9
4771 m Elb 0.4 -3.8 -1.8 0.04 2.52 -1.84 1.92 33.2
4771 n Elb 0.1 -4.0 -1.6 -1.10 2.18 -1.11 2.59 20.2
N3 v PT 0.0 -4.0 -0.7 -0.47 2.18 -1.11 2.93 21.7
N3 n ZE 0.0 -4.0 -0.7 -0.47 2.18 -1.11 2.93 7.8
9111 v PT 0.0 -4.1 1.5 0.04 2.18 -1.11 4.18 10.6

L i n e 27

205 n PT -2.3 -4.3 4.8 -0.38 0.10 0.00 0.12 26.5

117 v PT -2.3 -4.4 5.1 -0.38 0.10 0.00 0.14 29.2
117 n PT -2.3 -4.4 5.1 -0.38 0.10 0.00 0.14 29.5
115 v Elb -2.2 -4.1 6.3 -0.30 0.10 0.00 0.21 43.8
115 m Elb -2.2 -3.9 6.4 -0.27 0.16 0.07 0.20 66.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 193
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

115 n Elb -2.2 -3.8 6.2 -0.08 0.29 0.10 0.17 40.8
113 v Elb -2.4 -1.6 0.7 -0.08 0.17 0.10 0.14 34.1
113 m Elb -2.3 -1.6 0.4 -0.10 0.15 0.15 0.08 36.7
113 n Elb -2.2 -1.6 0.1 -0.06 0.17 0.13 0.11 33.5
111 v Elb 0.8 -4.4 -9.0 -0.06 0.09 0.13 0.08 29.2
111 m Elb 0.9 -4.4 -9.1 -0.10 0.05 0.08 0.13 45.3
111 n Elb 1.0 -4.3 -9.1 -0.08 0.07 -0.02 0.15 31.0
S110 v AR 0.0 -1.0 -0.0 -0.08 0.25 -0.02 0.18 36.5
S110 n AR 0.0 -1.0 -0.0 -0.45 0.13 -0.02 0.18 37.4
S110 -S109 -0.7 4.4 3.0 -0.45 0.20 -0.02 0.30 61.2
S109 v AR -0.7 4.4 -0.1 -0.45 0.20 -0.02 0.30 61.2
S109 n AR -0.7 4.4 -0.1 -0.21 0.63 -0.02 0.30 61.0
189 v Elb -1.4 6.1 -6.2 -0.21 0.52 -0.02 0.31 64.2
189 m Elb -1.4 6.3 -6.4 -0.51 0.22 -0.00 0.34 111.2
189 n Elb -1.4 6.5 -6.4 -0.51 0.21 0.01 0.34 69.4
105 v Elb 0.9 3.6 -3.8 -0.36 0.21 0.01 0.02 9.7
105 m Elb 0.9 3.4 -3.7 -0.24 0.33 -0.00 0.02 11.2
105 n Elb 0.9 3.2 -3.6 0.02 0.40 -0.00 0.04 11.5
103 v PT 0.5 2.9 -3.2 0.02 0.38 -0.00 0.13 27.4
103 n PT 0.5 2.9 -3.2 0.02 0.38 -0.00 0.13 27.3
101 v PT 0.4 2.8 -3.0 0.02 0.37 -0.00 0.15 32.0
101 n PT 0.4 2.8 -3.0 -0.22 0.43 0.00 0.29 59.5
99 v PT 0.3 2.7 -2.9 -0.22 0.44 0.00 0.26 54.0
S108 v AR -1.0 1.6 -0.1 -0.22 0.52 0.00 0.12 25.4
S108 n AR -1.0 1.6 -0.1 -0.10 0.26 0.00 0.12 24.7
191 v Elb -1.6 1.1 1.1 -0.10 0.24 0.00 0.05 12.8
191 m Elb -1.6 0.9 1.2 -0.16 0.19 0.02 0.04 15.9
191 n Elb -1.6 0.8 1.1 -0.13 0.21 0.03 0.04 12.2
107 v Elb -0.0 -0.5 -1.6 -0.13 0.15 0.03 0.14 30.4
107 m Elb 0.1 -0.7 -1.7 -0.16 0.10 -0.02 0.15 49.4
107 n Elb 0.3 -0.8 -1.6 -0.09 0.16 -0.06 0.14 30.6
91 v Elb 1.8 -1.2 -0.1 -0.00 0.16 -0.06 0.13 29.0
91 m Elb 1.7 -1.2 -0.0 -0.07 0.15 -0.03 0.14 46.5
91 n Elb 1.7 -1.1 0.0 -0.10 0.13 0.00 0.14 29.9
S107 v AR 1.5 -1.1 -0.0 -0.10 0.13 0.00 0.14 29.6
S107 n AR 1.5 -1.1 -0.0 -0.20 0.41 0.00 0.14 30.1
89 v PT 0.8 -0.9 -0.5 -0.20 0.32 0.00 0.03 10.1
89 n PT 0.8 -0.9 -0.5 -0.20 0.32 0.00 0.03 2.0
87 v PT 0.5 -0.8 -0.7 -0.20 0.12 0.00 0.07 2.4
87 n PT 0.5 -0.8 -0.7 -0.20 0.12 0.00 0.07 16.3
95 v PT 0.2 -0.7 -0.9 -0.20 0.07 0.00 0.08 18.4
95 n PT 0.2 -0.7 -0.9 -0.20 0.05 0.00 0.08 18.4
83 v Elb 0.0 -0.6 -0.9 -0.20 0.06 0.00 0.08 18.2
83 m Elb -0.1 -0.6 -0.9 -0.12 0.17 0.01 0.07 26.0
83 n Elb -0.1 -0.6 -0.8 0.03 0.21 0.01 0.06 15.2
Y1 v PT -0.1 -0.5 -0.7 0.04 0.21 0.01 0.05 12.5
9139 v PT -0.1 -0.5 -0.5 0.05 0.21 0.01 0.03 10.1
79 v PT -0.1 -0.5 -0.4 0.06 0.21 0.01 0.02 9.1
79 n PT -0.1 -0.5 -0.4 0.06 0.21 0.01 0.02 17.6
77 v PT -0.1 -0.5 -0.3 0.06 0.21 0.01 0.02 19.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 194
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

A115 v EM -0.0 -0.5 -0.2 0.06 0.21 0.01 0.02 20.2

A115 n EM -0.0 -0.5 -0.2 0.07 0.21 0.01 0.02 20.2
93 v PT -0.0 -0.5 -0.2 0.07 0.21 0.01 0.02 21.6
93 n PT -0.0 -0.5 -0.2 0.07 0.21 0.01 0.02 2.9
85 v PT -0.0 -0.5 -0.0 0.19 0.21 0.01 0.04 4.7
85 n PT -0.0 -0.5 -0.0 0.05 0.27 -0.04 0.03 2.4
71 v PT -0.0 -0.3 -0.0 0.05 0.36 -0.04 0.04 2.4
71 n PT -0.0 -0.3 -0.0 0.05 0.36 -0.04 0.04 12.9
SX1 v ST -0.0 -0.0 0.0 0.05 0.40 -0.04 0.09 21.4
SX1 n ST 0.0 0.0 0.0 -0.33 0.14 0.03 0.12 26.1
69 v PT -0.0 0.4 0.0 -0.33 0.11 0.03 0.14 31.6

L i n e 28

9111 n PT 0.0 -4.1 1.5 -2.16 20.93 2.14 10.43 1.1

9996 v PT -0.0 -0.0 1.5 -2.16 69.97 2.14 83.09 4.7
9996 n PT -0.0 -0.0 1.5 -28.68 47.64 -3.62 90.75 4.8
9995 v PT -0.0 6.6 1.4 -28.68 32.98 -3.62 70.11 3.7
9995 n PT -0.0 6.6 1.4 -0.00 56.94 -0.00 52.90 3.3
9119 v EM -0.0 11.4 1.3 -0.00 0.00 -0.00 0.00 0.0

L i n e 29

9111 n PT 0.0 -4.1 1.5 -0.00 20.89 0.11 6.77 0.9

9123 v PT 0.0 -4.1 1.5 -0.00 20.86 0.11 6.75 0.9
9123 n PT 0.0 -4.1 1.5 -0.00 20.35 -0.00 6.76 0.9
9121 v EM 0.0 -5.8 1.5 -0.00 0.00 -0.00 0.00 0.0

L i n e 30

95 n PT 0.2 -0.7 -0.9 0.06 0.00 0.00 0.00 6.0

127 v PT 0.3 -0.7 -1.1 0.05 0.00 0.00 0.00 6.0
127 n PT 0.3 -0.7 -1.1 0.05 0.00 0.00 0.00 1.5
129 v PT 0.3 -0.7 -1.2 0.00 0.00 0.00 0.00 1.5

L i n e 31

9123 n PT 0.0 -4.1 1.5 -0.51 0.00 0.00 0.00 0.1

9113 v PT 0.0 -4.1 3.7 0.00 0.00 0.00 0.00 0.0

L i n e 32

9997 n PT -0.0 0.0 1.8 -141.78 46.38 -10.49 28.79 0.0

EQ3 v ST 0.0 0.0 -0.0 -141.78 46.38 -10.49 2.42 0.0

L i n e 33

9998 n PT -0.0 7.1 1.6 -144.19 44.96 0.00 29.68 0.0

EQ4 v AR -0.0 7.0 -0.1 -144.19 44.96 0.00 0.00 0.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 195
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 34

C943 n PT -0.1 -0.8 -0.3 -1.47 6.54 1.38 1.23 19.9

C945 v PT -0.1 -0.5 -0.2 -1.47 6.67 1.38 2.39 23.7
SE61 v AR 0.0 -0.0 -0.1 -1.47 6.89 1.38 4.46 33.2
SE61 n AR 0.0 -0.0 -0.1 -2.60 7.26 1.38 4.46 33.7
C949 v PT 0.1 0.4 -0.0 -2.60 7.07 1.38 2.56 24.9
C949 n PT 0.1 0.4 -0.0 -2.60 7.07 1.38 2.56 20.6
C951 v PT 0.1 0.7 -0.0 -2.60 6.88 1.38 1.41 17.1
C951 n PT 0.1 0.7 -0.0 -0.30 4.52 1.15 3.30 21.1
9149 v PT 0.2 1.0 -0.0 -0.30 4.33 1.15 2.55 18.2
9149 n PT 0.2 1.0 -0.0 -0.30 4.33 1.15 2.55 22.0
A084 v EM 0.2 1.0 -0.0 -0.30 4.33 1.15 2.54 21.9
A084 n EM 0.2 1.0 -0.0 -0.30 4.03 1.15 2.54 21.8
9153 v PT 0.2 1.2 -0.1 -0.30 3.95 1.15 2.14 20.0
9153 n PT 0.2 1.2 -0.1 -0.30 3.95 1.15 2.14 4.2
D079 v PT 0.4 1.9 -0.1 -0.30 2.43 1.15 1.07 3.7
D079 n PT 0.4 1.9 -0.1 -0.30 2.43 1.15 1.07 15.6
A053 v EM 0.5 2.1 -0.1 -0.30 2.35 1.15 0.95 15.2
A053 n EM 0.5 2.1 -0.1 -0.30 2.05 1.15 0.95 15.0
C955 v PT 0.5 2.1 -0.1 -0.30 2.05 1.15 0.95 15.0
C955 n PT 0.5 2.1 -0.1 0.04 2.07 1.28 0.76 12.3
9175 v PT 0.5 2.2 -0.1 0.03 2.02 1.28 0.71 12.2
9175 n PT 0.5 2.2 -0.1 0.03 2.02 1.28 0.71 18.1
9177 v PT 0.5 2.4 -0.2 0.02 1.98 1.28 0.69 18.0
9177 n PT 0.5 2.4 -0.2 -0.30 1.95 1.15 0.89 18.1
A086 v EM 0.5 2.4 -0.2 -0.30 1.95 1.15 0.89 18.1
A086 n EM 0.5 2.4 -0.2 -0.30 1.77 1.15 0.89 17.9
9185 v PT 0.6 2.5 -0.2 -0.30 1.72 1.15 0.90 17.9
9185 n PT 0.6 2.5 -0.2 -0.30 1.72 1.15 0.90 3.7
9183 v PT 0.7 2.9 -0.2 -0.30 0.69 1.15 0.98 3.6
9183 n PT 0.7 2.9 -0.2 -0.30 0.69 1.15 0.98 17.4
A087 v EM 0.8 3.1 -0.2 -0.30 0.64 1.15 1.00 17.5
A087 n EM 0.8 3.1 -0.2 -0.30 0.46 1.15 1.00 17.3
9187 v PT 0.8 3.1 -0.2 -0.30 0.46 1.15 1.00 17.3
9187 n PT 0.8 3.1 -0.2 -0.37 0.41 1.00 1.16 17.5
9155 v PT 0.8 3.2 -0.2 -0.37 0.37 1.00 1.16 17.5
9155 n PT 0.8 3.2 -0.2 -0.37 0.37 1.00 1.16 12.2
9163 v PT 0.8 3.3 -0.2 -0.36 0.31 1.00 1.17 12.2
9163 n PT 0.8 3.3 -0.2 -0.30 0.37 1.15 1.02 14.7
C957 v Elb 1.0 3.7 -0.2 -0.30 0.20 1.15 1.04 14.7
C957 m Elb 1.1 3.9 -0.2 -0.31 0.13 0.76 1.34 24.7
C957 n Elb 1.1 4.1 -0.1 -0.21 0.25 0.27 1.50 15.0
SE62 v AR 1.1 4.1 -0.1 -0.21 0.25 0.27 1.50 15.0
SE62 n AR 1.1 4.1 -0.1 -6.92 7.93 0.27 1.50 18.8
C961 v Elb 1.1 4.1 -0.1 -6.92 7.93 0.27 1.50 18.8
C961 m Elb 1.2 4.2 0.1 -9.34 4.65 -0.26 1.92 35.5
C961 n Elb 1.2 4.1 0.3 -10.31 0.82 -0.73 2.04 19.8
C963 v PT 1.2 4.1 0.3 -10.31 0.82 -0.73 2.04 19.8
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 196
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

C965 v PT 1.2 4.1 0.5 -9.94 0.82 -0.73 2.08 19.9

C965 n PT 1.2 4.1 0.5 -9.94 0.82 -0.73 2.08 4.1
C967 v PT 1.3 3.8 1.2 -8.41 0.82 -0.73 2.28 4.2
C967 n PT 1.3 3.8 1.2 -8.41 0.82 -0.73 2.28 20.5
A057 v EM 1.3 3.7 1.4 -8.33 0.82 -0.73 2.34 20.7
A057 n EM 1.3 3.7 1.4 -8.03 0.82 -0.73 2.34 20.6
C969 v PT 1.3 3.7 1.4 -8.03 0.82 -0.73 2.34 20.6
C969 n PT 1.3 3.7 1.4 -8.03 0.82 -0.73 2.34 17.1
C971 v PT 1.3 3.5 1.7 -7.85 0.82 -0.73 2.44 17.4
C971 n PT 1.3 3.5 1.7 -7.10 1.72 0.07 3.87 23.4
C973 v PT 1.3 3.4 2.0 -6.91 1.72 0.07 3.56 21.9
C973 n PT 1.3 3.4 2.0 -6.91 1.72 0.07 3.56 26.4
C975 v Elb 3.5 -2.2 8.9 -3.89 1.72 0.07 3.67 26.1
C975 m Elb 3.6 -2.0 9.2 -3.75 1.64 -0.79 3.63 59.9
C975 n Elb 3.8 -1.6 9.1 -1.59 3.60 -1.29 2.88 23.7
C977 v Elb 4.7 0.3 6.7 -1.59 2.80 -1.29 1.22 16.8
C977 m Elb 4.8 0.8 6.4 -2.93 0.94 -0.14 2.09 36.1
C977 n Elb 4.6 1.3 6.7 -2.38 1.72 1.21 1.80 18.1
C979 v Elb 4.0 1.8 7.3 -2.10 1.72 1.21 1.79 18.0
C979 m Elb 3.7 1.9 7.5 -2.11 1.60 1.01 1.89 33.2
C979 n Elb 3.4 2.0 7.5 -1.82 1.82 0.73 1.88 17.4
SE63 v AR 3.4 2.0 7.5 -1.82 1.82 0.73 1.88 17.4
SE63 n AR 3.4 2.0 7.5 -1.70 0.70 0.73 1.88 17.1
C983 v Elb 3.4 2.0 7.5 -1.70 0.70 0.73 1.88 17.1
C983 m Elb 3.1 2.0 7.4 -1.33 1.17 0.38 1.87 32.4
C983 n Elb 2.9 2.0 7.1 -0.81 1.49 0.00 1.76 16.0
SE64 v AR -1.0 0.0 -0.0 -0.81 0.49 0.00 0.09 12.1
SE64 n AR -1.0 0.0 -0.0 0.00 0.36 0.00 0.09 12.1
9147 v PT -1.8 -0.4 -1.5 0.00 0.00 0.00 0.00 12.1

L i n e 35

C951 n PT 0.1 0.7 -0.0 -2.35 2.31 0.27 1.95 23.4

D059 v PT -0.0 0.7 0.2 -2.31 2.31 0.27 1.57 19.9
D061 v Elb -0.8 0.5 1.5 -1.94 2.31 0.27 0.14 10.3
D061 m Elb -1.0 0.5 1.7 -1.48 2.56 0.44 0.29 12.2
D061 n Elb -1.4 0.5 1.6 -0.25 2.89 0.66 0.44 13.8
D063 v PT -1.4 0.5 1.6 -0.26 2.89 0.67 0.44 13.8
D063 n PT -1.4 0.5 1.6 -0.25 2.89 0.66 0.44 13.8
D065 v Elb -1.4 0.5 1.6 -0.25 2.89 0.66 0.44 13.8
D065 m Elb -1.6 0.7 1.5 -1.80 2.21 0.84 0.61 18.4
D065 n Elb -1.6 1.0 1.4 -2.29 1.60 0.75 0.78 15.2
D067 v PT -0.4 2.9 1.5 -2.29 0.87 0.75 1.22 17.8
D067 n PT -0.4 2.9 1.5 -2.29 0.87 0.75 1.22 3.6
9161 v PT 0.1 3.6 1.6 -2.29 0.35 0.75 1.31 3.7
9161 n PT 0.1 3.6 1.6 -2.29 0.35 0.75 1.31 18.2
D071 v PT 0.3 3.8 1.6 -2.29 0.55 0.75 1.28 18.0
D071 n PT 0.3 3.8 1.6 -2.29 0.55 0.75 1.28 18.0
D073 v Elb 0.3 3.8 1.6 -2.29 0.55 0.75 1.28 18.0
D073 m Elb 0.6 3.9 1.7 -1.45 1.89 1.37 0.28 17.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 197
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

D073 n Elb 0.9 3.8 1.7 0.25 2.39 1.11 0.93 18.5
D075 v PT 1.0 3.8 1.7 0.25 2.40 1.11 1.02 19.0
D075 n PT 1.0 3.8 1.7 0.26 2.40 1.11 1.02 19.0
C971 v PT 1.3 3.5 1.7 0.26 2.41 1.11 1.32 20.9

L i n e 36

1435 n PT -0.0 1.8 3.9 0.12 0.39 0.54 0.38 21.9

1667 v PT 0.2 1.9 3.9 0.12 0.37 0.54 0.35 21.4
1667 n PT 0.2 1.9 3.9 0.12 0.37 0.54 0.35 21.4
1669 v Elb 1.5 2.1 3.8 0.12 0.35 0.54 0.16 19.5
1669 m Elb 1.8 2.0 3.7 0.05 0.37 0.48 0.31 24.1
1669 n Elb 1.9 1.7 3.5 -0.09 0.37 0.11 0.59 21.4
1671 v PT 1.9 0.7 2.1 -0.26 0.37 0.11 0.80 26.3
1673 v PT 1.9 0.5 1.8 -0.30 0.37 0.11 0.83 27.3
1673 n PT 1.9 0.5 1.8 -0.67 0.37 0.11 0.83 27.5
8993 v PT 1.9 0.4 1.6 -0.71 0.37 0.11 0.87 28.4
A037 v EM 1.9 0.4 1.6 -0.71 0.37 0.11 0.87 28.5
A037 n EM 1.9 0.4 1.6 -0.90 0.37 0.11 0.87 28.6
N12 v ZE 1.9 0.3 1.3 -0.92 0.37 0.11 0.90 29.5
9261 v PT 1.9 0.0 -0.0 -1.23 0.37 0.11 1.09 34.7
9261 n PT 1.9 0.0 -0.0 -0.12 1.28 -1.09 0.11 0.0
2 v ST -0.0 0.0 0.0 -0.12 1.28 -1.09 1.02 0.0
2 n ST 0.0 0.0 0.0 -0.16 0.60 0.58 0.44 0.0
9259 v PT -1.9 -0.0 -0.0 -0.16 0.60 0.58 0.05 0.0
9259 n PT -1.9 -0.0 -0.0 -0.59 0.18 0.02 0.58 21.4
N11 v PT -1.9 0.1 1.3 -0.29 0.18 0.02 0.62 22.1
A038 v EM -1.9 0.2 1.6 -0.26 0.18 0.02 0.63 22.3
A038 n EM -1.9 0.2 1.6 -0.07 0.18 0.02 0.63 22.2
8995 v PT -1.9 0.2 1.6 -0.07 0.18 0.02 0.63 22.2
1685 v PT -1.9 0.3 1.8 -0.03 0.18 0.02 0.64 22.4

L i n e 37

1435 n PT -0.0 1.8 3.9 0.16 0.81 -0.71 0.47 26.9

1679 v PT -0.3 1.8 3.9 0.16 0.77 -0.71 0.38 25.7
1681 v Elb -1.6 1.5 3.8 0.16 0.62 -0.71 0.03 22.9
1681 m Elb -1.8 1.4 3.7 0.52 0.31 -0.48 0.52 32.9
1681 n Elb -1.9 1.1 3.5 0.54 0.18 0.02 0.70 23.9
1683 v PT -1.9 0.4 2.1 0.37 0.18 0.02 0.65 22.7
1685 v PT -1.9 0.3 1.8 0.34 0.18 0.02 0.64 22.5

L i n e 38

1685 n PT -1.9 0.3 1.8 0.00 0.37 0.00 0.13 28.7

1691 v PT -2.1 0.3 1.8 0.00 0.37 0.00 0.09 23.1
1693 v PT -2.5 0.3 1.8 0.00 0.31 -0.00 0.04 16.2
1693 n PT -2.5 0.3 1.8 0.00 0.31 -0.00 0.04 3.5
1695 v EM -3.0 0.3 1.7 0.00 0.02 -0.00 0.00 3.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 198
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 39

101 n PT 0.4 2.8 -3.0 -0.73 0.28 -0.11 0.15 39.4

133 v PT 0.5 2.6 -2.9 -0.73 0.28 -0.11 0.13 36.9
133 n PT 0.5 2.6 -2.9 -0.73 0.28 -0.11 0.13 36.9
135 v PT 1.5 0.5 -2.0 -0.67 0.28 -0.11 0.09 30.1
73 v PT 1.6 0.3 -1.9 -0.66 0.28 -0.11 0.10 31.5
73 n PT 1.6 0.3 -1.9 -0.24 0.18 -0.04 0.15 32.9
137 v PT 1.6 0.1 -1.8 -0.23 0.18 -0.04 0.14 30.8
139 v Elb 1.9 -0.5 -1.4 -0.21 0.18 -0.04 0.10 23.2
139 m Elb 1.9 -0.7 -1.3 -0.03 0.27 0.03 0.09 31.0
139 n Elb 1.8 -0.6 -1.2 0.16 0.21 0.07 0.05 18.7
141 v PT 1.5 -0.4 -1.1 0.16 0.16 0.07 0.01 15.4
141 n PT 1.5 -0.4 -1.1 0.16 0.16 0.07 0.01 2.8
143 v PT 1.1 -0.1 -1.1 0.16 0.12 0.07 0.01 2.7
143 n PT 1.1 -0.1 -1.1 0.16 0.12 0.07 0.01 15.0
145 v PT 0.8 0.1 -1.0 0.16 0.16 0.07 0.03 16.2
145 n PT 0.8 0.1 -1.0 0.16 0.21 0.07 0.03 16.6
147 v Elb 0.6 0.2 -1.0 0.16 0.22 0.07 0.04 18.3
147 m Elb 0.6 0.3 -0.9 0.26 0.09 0.07 0.05 21.5
147 n Elb 0.5 0.2 -0.8 0.22 0.18 0.04 0.07 18.5
S98 v AR 0.5 0.2 -0.7 0.23 0.18 0.04 0.06 16.5
9141 v PT 0.5 0.1 -0.5 0.24 0.18 0.04 0.05 14.7
151 v PT 0.5 0.0 -0.4 0.24 0.18 0.04 0.04 13.8
151 n PT 0.5 0.0 -0.4 0.24 0.18 0.04 0.04 39.0
153 v PT 0.5 -0.0 -0.3 0.25 0.18 0.04 0.04 38.0
A114 v EM 0.5 -0.0 -0.2 0.25 0.18 0.04 0.04 38.1
A114 n EM 0.5 -0.0 -0.2 0.26 0.18 0.04 0.04 38.2
155 v PT 0.5 -0.0 -0.2 0.26 0.18 0.04 0.04 38.5
155 n PT 0.5 -0.0 -0.2 0.26 0.18 0.04 0.04 5.1
157 v PT 0.5 -0.0 -0.0 0.37 0.18 0.04 0.05 5.8
157 n PT 0.5 -0.0 -0.0 0.16 0.38 0.02 0.06 2.3
159 v PT 0.3 -0.0 -0.0 0.16 0.49 0.02 0.04 2.3
159 n PT 0.3 -0.0 -0.0 0.16 0.49 0.02 0.04 13.2
SX2 v ST 0.0 -0.0 0.0 0.16 0.55 0.02 0.11 24.8
SX2 n ST 0.0 0.0 0.0 0.00 0.38 -0.03 0.09 21.7
163 v PT -0.1 -0.0 -0.0 0.00 0.38 -0.03 0.08 18.8

L i n e 40

73 n PT 1.6 0.3 -1.9 -0.08 0.48 0.00 0.15 32.4

75 v PT 1.7 0.3 -2.0 -0.08 0.47 0.00 0.12 26.5
75 n PT 1.7 0.3 -2.0 -0.08 0.47 0.00 0.12 26.5
97 v PT 2.0 0.1 -2.3 -0.08 0.42 0.00 0.03 10.0
97 n PT 2.0 0.1 -2.3 -0.08 0.42 0.00 0.03 2.0
51 v PT 2.5 -0.1 -2.8 -0.08 0.23 0.00 0.06 2.1
51 n PT 2.5 -0.1 -2.8 -0.08 0.23 0.00 0.06 12.9
49 v Elb 2.8 -0.2 -3.1 -0.08 0.22 0.00 0.09 20.0
49 m Elb 2.9 -0.2 -3.1 -0.21 0.11 -0.02 0.10 27.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 199
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

49 n Elb 2.9 -0.1 -3.0 -0.22 0.09 -0.03 0.10 22.2

53 v Elb 2.4 1.8 0.2 -0.22 0.18 -0.03 0.11 24.6
53 m Elb 2.3 1.9 0.3 -0.28 0.09 -0.03 0.11 30.6
53 n Elb 2.3 2.1 0.3 -0.18 0.24 -0.01 0.11 23.8
55 v Elb 2.1 2.4 -0.0 -0.20 0.24 -0.01 0.08 18.5
55 m Elb 2.0 2.4 -0.1 -0.09 0.30 0.04 0.07 19.6
55 n Elb 1.9 2.4 -0.1 0.08 0.31 0.05 0.07 19.3
S99 v AR 1.0 2.0 -0.0 0.08 0.35 0.05 0.23 49.8
S99 n AR 1.0 2.0 -0.0 -0.41 0.34 0.05 0.23 50.8
S99 -41 -2.4 2.2 -1.8 -0.41 0.34 0.05 0.26 56.5
41 v PT -2.4 1.8 -1.7 -0.41 0.17 0.05 0.26 56.5
39 v PT -2.5 1.7 -1.7 -0.41 0.17 0.05 0.27 58.6
39 n PT -2.5 1.7 -1.7 -0.42 0.28 0.14 0.30 70.2
37 v PT -2.6 1.6 -1.6 -0.42 0.28 0.14 0.30 70.1
35 v PT -3.4 0.5 -0.9 -0.42 0.33 0.14 0.32 74.1
33 v PT -3.5 0.3 -0.8 -0.42 0.33 0.14 0.33 75.5
33 n PT -3.5 0.3 -0.8 -0.43 0.82 -0.00 0.42 88.7
31 v PT -3.6 0.0 -0.7 -0.43 0.83 -0.00 0.40 84.4
31 n PT -3.6 0.0 -0.7 -0.43 0.83 -0.00 0.40 84.4
S100 v AR -4.1 -1.4 -0.1 -0.43 0.87 -0.00 0.39 83.7
S100 n AR -4.1 -1.4 -0.1 -0.14 0.29 -0.00 0.39 82.4
S100 -S101 -7.1 -16.3 0.6 -0.14 0.29 -0.00 0.39 82.4
S101 v AR -7.1 -16.3 -0.0 -0.14 0.26 -0.00 0.16 34.5
S101 n AR -7.1 -16.3 -0.0 -0.12 0.33 -0.00 0.16 34.5
43 v Elb -8.0 -20.5 -0.9 -0.12 0.32 -0.00 0.28 58.9
43 m Elb -8.1 -20.9 -1.1 -0.04 0.33 0.20 0.22 65.9
43 n Elb -8.0 -21.1 -1.2 0.06 0.33 0.30 0.06 58.1
45 v Elb -7.1 -21.8 -1.8 0.02 0.33 0.30 0.14 63.6
45 m Elb -7.1 -21.8 -2.0 -0.21 0.25 0.21 0.26 76.0
45 n Elb -7.2 -21.8 -2.1 -0.31 0.12 0.00 0.33 69.5
~021 -S102 -8.5 -21.8 -2.2 -0.31 0.28 0.00 0.33 69.5
S102 v AR -7.1 -18.0 -0.0 -0.31 0.28 0.00 0.12 25.3
S102 n AR -7.1 -18.0 -0.0 -0.38 0.09 0.00 0.12 25.3
21 v Elb -5.9 -16.9 0.5 -0.38 0.11 0.00 0.14 29.5
21 m Elb -5.8 -16.8 0.5 -0.32 0.23 -0.02 0.13 35.0
21 n Elb -5.6 -16.8 0.4 -0.09 0.39 -0.03 0.11 25.3
19 v Elb -4.2 -17.1 -0.6 -0.15 0.39 -0.03 0.12 26.8
19 m Elb -4.1 -17.1 -0.7 -0.18 0.38 -0.10 0.09 29.9
19 n Elb -4.2 -17.0 -0.9 -0.09 0.41 -0.13 0.05 29.9
27 v Elb -4.4 -16.9 -1.1 -0.09 0.42 -0.13 0.05 29.7
27 m Elb -4.4 -16.7 -1.2 -0.33 0.27 -0.07 0.12 34.3
27 n Elb -4.4 -16.6 -1.2 -0.38 0.21 0.02 0.13 28.7
S104 v AR -2.0 -14.5 -0.0 -0.38 0.35 0.02 0.22 46.8
S104 n AR -2.0 -14.5 -0.0 -0.59 0.27 0.02 0.22 47.2
S104 -S105 -2.0 -14.5 -1.8 -0.59 0.27 0.02 0.22 47.2
S105 v AR 0.6 -6.7 -0.0 -0.59 0.26 0.02 0.19 41.0
S105 n AR 0.6 -6.7 -0.0 -0.74 0.25 0.02 0.19 41.4
S105 -S106 0.6 -6.7 -1.5 -0.74 0.27 0.02 0.23 49.5
S106 v AR -0.0 1.0 -0.0 -0.74 0.27 0.02 0.23 49.5
S106 n AR -0.0 1.0 -0.0 -0.28 0.16 0.02 0.23 48.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 200
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

11 v Elb -0.1 1.6 -0.4 -0.28 0.13 0.02 0.19 39.8

11 m Elb -0.2 1.7 -0.5 -0.13 0.28 0.03 0.17 45.4
11 n Elb -0.3 1.6 -0.6 0.09 0.29 0.02 0.16 33.7
15 v Elb -3.9 -1.8 -2.9 -0.06 0.29 0.02 0.23 47.9
15 m Elb -4.0 -1.9 -3.0 -0.10 0.28 0.17 0.17 53.0
15 n Elb -3.9 -2.0 -3.1 -0.08 0.29 0.23 0.08 48.2
17 v Elb -3.5 -2.0 -3.5 -0.08 0.30 0.23 0.09 48.6
17 m Elb -3.4 -2.0 -3.6 -0.25 0.18 0.12 0.22 60.2
17 n Elb -3.4 -1.9 -3.6 -0.28 0.14 -0.05 0.24 51.4
9 v Elb -4.6 1.6 1.2 -0.28 0.36 -0.05 0.26 55.6
9 m Elb -4.6 1.7 1.2 -0.45 0.09 0.02 0.27 72.1
9 n Elb -4.6 1.8 1.1 -0.37 0.29 0.08 0.26 57.3
7 v Elb -3.7 1.5 0.1 -0.44 0.29 0.08 0.13 33.3
7 m Elb -3.7 1.5 0.0 -0.44 0.30 0.05 0.14 38.3
7 n Elb -3.6 1.4 0.0 -0.37 0.38 0.01 0.14 30.4
25 v PT -2.1 0.4 0.2 -0.43 0.43 0.01 0.08 18.2
25 n PT -2.1 0.4 0.2 -0.43 0.43 0.01 0.08 18.2
T067 v PT 0.0 -0.7 -0.1 -0.56 0.54 0.01 0.55 41.2

L i n e 41

145 n PT 0.8 0.1 -1.0 0.06 0.00 0.00 0.00 6.0

177 v PT 0.8 0.3 -1.2 0.05 0.00 0.00 0.00 6.0
177 n PT 0.8 0.3 -1.2 0.05 0.00 -0.00 0.00 1.5
179 v PT 0.7 0.4 -1.3 -0.00 0.00 -0.00 0.00 1.5

L i n e 42

9427 n PT -0.0 -0.0 0.0 0.00 0.00 0.00 0.00 1.3

SE1 v AR -0.0 -0.0 -0.0 -0.00 0.92 0.00 0.23 1.3
SE1 n AR -0.0 -0.0 -0.0 -1.61 4.46 -0.00 0.23 1.7
SE2 v AR -0.0 -0.0 -0.0 -1.63 6.62 -0.00 6.71 3.4
SE2 n AR -0.0 -0.0 -0.0 -3.45 5.75 -0.00 6.71 3.4
SE3 v AR -0.0 0.0 -0.0 -3.48 5.33 -0.00 5.44 2.9
SE3 n AR -0.0 0.0 -0.0 -3.70 5.64 -0.00 5.44 3.0
SE4 v AR 0.0 -0.0 -0.0 -3.72 5.44 -0.00 4.84 2.8
SE4 n AR 0.0 -0.0 -0.0 -3.15 4.87 -0.00 4.84 2.7
SE5 v AR 0.0 0.0 -0.0 -3.17 6.21 -0.00 8.87 4.1
SE5 n AR 0.0 0.0 -0.0 -0.00 7.92 -0.00 8.87 4.1
F117 v Elb 0.0 0.0 -0.0 -0.01 6.48 -0.00 3.26 2.4
F117 m Elb 0.0 0.0 -0.2 -0.04 4.73 -0.20 2.49 4.9
F117 n Elb 0.0 0.0 -0.4 -0.05 2.98 3.09 5.19 2.9
~653 -~654 -0.0 -0.0 -0.7 -0.06 2.98 3.09 7.60 3.3
F119 v Elb -0.0 -0.0 -0.7 -0.06 2.86 3.09 5.39 2.9
F119 m Elb -0.0 -0.0 -0.5 -0.07 4.61 -0.39 2.74 5.4
F119 n Elb -0.0 -0.0 -0.3 -0.03 6.36 -0.36 3.10 2.5
SE6 v AR -0.0 -0.0 -0.0 -0.04 11.49 -0.36 27.92 10.8
SE6 n AR -0.0 -0.0 -0.0 0.00 11.45 -0.36 27.92 10.8
F125 v Elb 0.0 -0.0 -0.1 -0.01 6.31 -0.36 3.23 2.5
F125 m Elb 0.0 -0.0 -0.3 -0.04 4.56 -0.01 2.11 4.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 201
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

F125 n Elb 0.0 0.0 -0.4 -0.05 2.81 -2.91 4.63 2.7
~657 -~658 -0.0 0.0 -0.4 -0.06 3.03 -2.91 6.77 3.0
F127 v Elb -0.0 0.0 -0.3 -0.06 3.03 -2.91 4.29 2.7
F127 m Elb -0.0 0.0 -0.2 -0.06 4.78 -0.33 1.69 3.5
F127 n Elb -0.0 0.0 -0.0 -0.04 6.53 -0.96 3.49 2.7
SE7 v AR -0.0 -0.0 -0.0 -0.04 7.97 -0.96 9.16 4.3
SE7 n AR -0.0 -0.0 -0.0 -3.00 6.25 -0.96 9.16 4.3
SE8 v AR 0.0 0.0 -0.0 -3.02 4.84 -0.96 5.11 2.9
SE8 n AR 0.0 0.0 -0.0 -2.92 5.71 -0.96 5.11 3.0
F133 v PT 0.0 0.0 -0.0 -2.93 2.78 -0.96 4.17 2.4
F133 n PT 0.0 0.0 -0.0 -2.71 2.99 -1.27 4.08 2.4
F135 v PT 0.0 0.0 -0.0 -2.67 3.52 -1.27 4.12 2.5
F135 n PT 0.0 0.0 -0.0 -2.67 3.52 -1.27 4.12 2.3
F137 v PT 0.0 0.0 -0.0 -2.62 4.12 -1.27 4.39 2.4
F137 n PT 0.0 0.0 -0.0 -2.93 3.90 -0.90 4.48 2.4
SE9 v AR 0.0 0.0 -0.0 -2.94 5.92 -0.90 7.54 3.2
SE9 n AR 0.0 0.0 -0.0 -0.15 5.02 -0.90 7.54 3.0
SE10 v AR 0.0 -0.4 -0.0 -0.17 7.83 -0.90 19.95 6.3
SE10 n AR 0.0 -0.4 -0.0 -0.06 8.80 -0.90 19.95 6.4
T067 v PT 0.0 -0.7 -0.1 -0.07 5.53 -0.90 9.01 3.3
T067 n PT 0.0 -0.7 -0.1 -0.15 5.16 -0.66 8.92 3.3
F145 v Elb 0.0 -0.8 -0.1 -0.15 3.90 -0.66 4.80 2.3
F145 m Elb -0.0 -1.0 -0.2 -0.54 3.57 1.50 0.62 1.9
F145 n Elb -0.0 -1.0 -0.2 -2.83 3.56 -0.07 4.22 2.2
F155 v PT -0.1 -0.6 -0.2 -10.14 3.56 -0.07 10.57 4.1
F155 n PT -0.1 -0.6 -0.2 -10.14 3.56 -0.09 10.57 0.8
F157 v PT -0.1 -0.5 -0.2 -43.40 3.57 -0.09 13.30 1.3
F157 n PT -0.1 -0.5 -0.2 -43.40 3.57 -0.09 13.30 6.9
9999 v EM -0.1 -0.4 -0.2 -43.72 3.57 -0.09 13.86 7.1
9999 n EM -0.1 -0.4 -0.2 -47.32 3.56 -0.07 13.86 7.3
A024 v Elb -0.1 -0.4 -0.2 -47.33 3.57 -0.10 13.87 7.3
A024 m Elb -0.1 -0.2 -0.2 -46.11 15.25 -0.31 10.72 20.4
A024 n Elb 0.0 0.0 0.0 -37.55 32.52 -0.53 2.35 8.3
SE11 v AR 0.0 0.0 0.0 -37.55 32.52 -0.53 2.35 8.3
SE11 n AR 0.0 0.0 0.0 2.30 2.30 -0.53 2.35 1.8
A023 v Elb 0.0 0.0 0.0 2.30 2.30 -0.53 2.35 1.8
A023 m Elb 0.1 0.2 0.2 0.82 1.99 -0.70 1.13 2.4
A023 n Elb 0.3 0.2 0.5 -0.00 1.04 -0.75 0.26 1.5
BC99 v ST 0.4 0.2 0.7 -0.00 0.00 -0.75 0.00 1.5

L i n e 43

69 n PT -0.0 0.4 0.0 0.06 0.00 0.00 0.00 0.7

121 v PT -0.0 0.5 -0.2 0.05 0.00 0.00 0.00 0.6
121 n PT -0.0 0.5 -0.2 0.05 0.00 0.00 0.00 0.1
123 v PT -0.1 0.5 -0.3 -0.00 0.00 0.00 0.00 0.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 202
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 44

9996 n PT -0.0 -0.0 1.5 -117.22 27.14 -14.99 8.53 0.0

EQ01 v ST -0.0 0.0 0.0 -117.22 27.14 -14.99 9.89 0.0

L i n e 45

9995 n PT -0.0 6.6 1.4 -89.37 29.31 0.00 17.58 0.0

EQ02 v AR -0.0 6.6 -0.1 -89.37 29.31 0.00 0.00 0.0

L i n e 46

1673 n PT 1.9 0.5 1.8 0.00 0.37 0.00 0.13 28.7

1697 v PT 2.1 0.5 1.8 0.00 0.37 0.00 0.09 23.1
1699 v PT 2.5 0.6 1.8 0.00 0.31 0.00 0.04 16.2
1699 n PT 2.5 0.6 1.8 0.00 0.31 0.00 0.04 3.5
1701 v EM 3.0 0.6 1.7 0.00 0.02 0.00 0.00 3.5

L i n e 47

39 n PT -2.5 1.7 -1.7 -0.28 0.03 -0.03 0.09 20.0

175 v PT -2.4 1.8 -1.5 -0.28 0.03 -0.03 0.09 19.6
175 n PT -2.4 1.8 -1.5 -0.28 0.03 -0.03 0.09 19.6
173 v Elb -1.8 2.1 0.4 -0.15 0.03 -0.03 0.06 13.5
173 m Elb -1.7 2.0 0.5 -0.08 0.12 -0.01 0.06 15.8
173 n Elb -1.7 1.9 0.5 0.03 0.13 0.02 0.05 11.6
S50 v PT -1.4 0.8 0.1 0.03 0.06 0.02 0.03 8.0
169 v Elb -1.2 0.1 -0.1 0.03 0.01 0.02 0.04 9.4
169 m Elb -1.2 -0.0 -0.1 0.02 0.02 -0.01 0.04 11.7
169 n Elb -1.1 -0.0 -0.1 -0.00 0.03 -0.03 0.03 8.9
167 v PT -0.7 -0.0 -0.1 -0.00 0.06 -0.03 0.02 8.1
167 n PT -0.7 -0.0 -0.1 -0.00 0.06 -0.03 0.02 0.8
165 v PT -0.4 -0.0 -0.0 0.00 0.27 -0.03 0.02 1.0
165 n PT -0.4 -0.0 -0.0 0.00 0.27 -0.03 0.02 9.7
163 v PT -0.1 -0.0 -0.0 0.00 0.32 -0.03 0.08 18.6

L i n e 48

163 n PT -0.1 -0.0 -0.0 0.06 0.00 0.00 0.00 0.7

183 v PT -0.1 0.0 -0.2 0.05 0.00 0.00 0.00 0.6
183 n PT -0.1 0.0 -0.2 0.05 0.00 0.00 0.00 0.1
185 v PT -0.1 0.0 -0.3 -0.00 0.00 0.00 0.00 0.0

L i n e 49

33 n PT -3.5 0.3 -0.8 -0.53 0.33 -0.08 0.15 36.9

59 v PT -3.4 0.4 -0.7 -0.53 0.33 -0.08 0.13 33.3
59 n PT -3.4 0.4 -0.7 -0.53 0.33 -0.08 0.13 33.3
61 v Elb -1.6 3.2 1.2 -0.39 0.33 -0.08 0.26 58.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 203
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

61 m Elb -1.5 3.2 1.4 -0.51 0.04 -0.03 0.28 73.6

61 n Elb -1.4 3.2 1.4 -0.33 0.38 0.03 0.27 57.1
S56 v PT -0.5 2.1 0.9 -0.33 0.30 0.03 0.08 19.6
65 v PT -0.2 1.1 0.3 -0.33 0.21 0.03 0.13 30.0
65 n PT -0.2 1.1 0.3 -0.33 0.21 0.03 0.13 3.0
67 v PT -0.1 0.8 0.2 -0.33 0.01 0.03 0.15 3.3
67 n PT -0.1 0.8 0.2 -0.33 0.01 0.03 0.15 32.8
69 v PT -0.0 0.4 0.0 -0.33 0.06 0.03 0.14 31.5

L i n e 50

925 n EM -0.0 -0.3 -0.0 0.00 0.03 0.00 0.00 1.7

A017 v EM -0.0 -0.3 -0.0 0.00 0.04 0.00 0.00 1.7
A017 n EM -0.0 -0.3 -0.0 0.00 0.09 0.00 0.00 1.7
8953 v PT -0.0 -0.3 -0.0 0.00 0.09 0.00 0.00 1.7
907 v PT 0.0 -0.3 -0.0 0.00 0.10 -0.00 0.01 1.8

L i n e 51

907 n PT 0.0 -0.3 -0.0 -0.39 0.06 -0.00 0.02 2.4

909 v PT 0.0 -0.2 -0.0 -0.39 0.05 -0.00 0.03 2.5
911 v PT 0.0 -0.2 -0.0 -0.39 0.04 -0.00 0.03 2.6
911 n PT 0.0 -0.2 -0.0 -0.39 0.03 -0.00 0.03 2.6
913 v PT 0.0 -0.2 -0.0 -0.39 0.04 -0.00 0.03 2.5
913 n PT 0.0 -0.2 -0.0 -0.39 0.04 -0.00 0.03 2.5
915 v PT 0.0 -0.2 -0.0 -0.39 0.05 -0.00 0.03 2.4
915 n PT 0.0 -0.2 -0.0 -0.38 0.11 -0.00 0.03 2.4
917 v PT 0.0 -0.2 -0.0 -0.38 0.11 -0.00 0.02 2.2
917 n PT 0.0 -0.2 -0.0 -0.38 0.11 -0.00 0.02 5.7
919 v PT 0.0 -0.2 -0.0 -0.38 0.12 -0.00 0.02 4.8
919 n PT 0.0 -0.2 -0.0 -0.39 0.06 -0.00 0.02 4.7
N14 v ZE 0.0 0.0 0.0 -0.39 0.13 -0.00 0.03 7.8

L i n e 52

907 n PT 0.0 -0.3 -0.0 -0.39 0.16 -0.02 0.02 2.7

905 v PT 0.0 -0.3 -0.0 -0.39 0.18 -0.02 0.02 2.5
905 n PT 0.0 -0.3 -0.0 0.39 0.18 0.02 0.02 2.5
9529 v Elb 0.0 -0.3 -0.0 -0.39 0.18 -0.02 0.02 2.5
9529 m Elb 0.0 -0.3 -0.0 -0.29 0.32 -0.02 0.01 2.8
9529 n Elb 0.0 -0.3 -0.0 -0.14 0.41 -0.02 0.02 3.3
S217 v AR 0.0 -0.3 -0.0 -0.14 0.41 -0.02 0.02 3.3
S217 n AR 0.0 -0.3 -0.0 -0.73 0.68 -0.02 0.02 4.5
9528 v Elb 0.0 -0.3 -0.0 -0.73 0.68 -0.02 0.02 4.5
9528 m Elb 0.0 -0.3 -0.0 -0.92 0.35 -0.02 0.01 3.1
9528 n Elb 0.0 -0.3 -0.0 -0.98 0.05 -0.02 0.01 2.6
895 v PT 0.0 -0.3 0.1 -0.90 0.05 -0.02 0.00 2.2
895 n PT 0.0 -0.3 0.1 -0.90 0.05 -0.02 0.00 0.5
893 v PT 0.1 -0.3 0.1 -0.54 0.05 -0.02 0.01 0.5
893 n PT 0.1 -0.3 0.1 -0.54 0.05 -0.02 0.01 2.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 204
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

889 v PT 0.1 -0.4 0.4 -0.34 0.05 -0.02 0.06 4.1

855 v PT 0.1 -0.4 0.4 -0.34 0.05 -0.02 0.06 4.3

L i n e 53

911 n PT 0.0 -0.2 -0.0 -0.05 0.00 0.00 0.00 1.0

927 v PT 0.0 -0.2 -0.0 -0.05 0.00 0.00 0.00 1.0
927 n PT 0.0 -0.2 -0.0 -0.05 0.00 0.00 0.00 0.3
929 v PT 0.0 -0.2 0.0 0.00 0.00 0.00 0.00 0.3

L i n e 54

855 n PT 0.1 -0.4 0.4 -0.07 0.15 0.00 0.05 3.4

857 v PT 0.2 -0.4 0.4 -0.07 0.14 0.00 0.04 2.9
857 n PT 0.2 -0.4 0.4 -0.07 0.14 0.00 0.04 2.9
859 v Elb 0.8 -0.5 0.4 -0.07 0.18 0.00 0.08 4.7
859 m Elb 0.8 -0.5 0.4 -0.19 0.08 -0.00 0.09 8.6
859 n Elb 0.8 -0.5 0.4 -0.21 0.07 -0.01 0.09 5.5
861 v PT 0.4 -0.4 0.1 -0.40 0.07 -0.01 0.02 2.4
861 n PT 0.4 -0.4 0.1 -0.40 0.07 -0.01 0.02 0.5
863 v PT 0.2 -0.4 0.1 -0.76 0.07 -0.01 0.01 0.5
863 n PT 0.2 -0.4 0.1 -0.76 0.07 -0.01 0.01 2.3
9535 v Elb 0.1 -0.3 -0.0 -0.84 0.07 -0.01 0.02 2.6
9535 m Elb 0.1 -0.3 -0.0 -0.78 0.34 -0.01 0.02 3.6
9535 n Elb 0.1 -0.3 -0.0 -0.60 0.61 -0.02 0.04 4.7
S216 v AR 0.1 -0.3 -0.0 -0.60 0.61 -0.02 0.04 4.7
S216 n AR 0.1 -0.3 -0.0 -0.06 0.37 -0.02 0.04 3.6
9536 v Elb 0.1 -0.3 -0.0 -0.06 0.37 -0.02 0.04 3.6
9536 m Elb 0.0 -0.3 -0.0 -0.20 0.31 -0.02 0.03 3.3
9536 n Elb 0.0 -0.3 -0.0 -0.31 0.20 -0.02 0.02 2.6
871 v PT 0.0 -0.3 -0.0 0.31 0.20 0.02 0.02 2.6
871 n PT 0.0 -0.3 -0.0 -0.31 0.20 -0.02 0.02 2.6
873 v PT 0.0 -0.3 -0.0 -0.31 0.19 -0.02 0.00 2.3
873 n PT 0.0 -0.3 -0.0 -0.31 0.09 -0.03 0.00 2.4
875 v PT 0.0 -0.2 -0.0 -0.31 0.07 -0.03 0.01 2.4
875 n PT 0.0 -0.2 -0.0 -0.31 0.07 -0.03 0.01 2.4
877 v PT 0.0 -0.2 -0.0 -0.31 0.06 -0.03 0.01 2.5
877 n PT 0.0 -0.2 -0.0 -0.31 0.01 -0.03 0.01 2.4
879 v PT 0.0 -0.2 -0.0 -0.31 0.01 -0.03 0.01 2.4
879 n PT 0.0 -0.2 -0.0 -0.31 0.02 -0.03 0.01 2.4
881 v PT 0.0 -0.2 -0.0 -0.31 0.02 -0.03 0.01 2.4
881 n PT 0.0 -0.2 -0.0 -0.30 0.06 -0.03 0.01 2.5
883 v PT 0.0 -0.2 -0.0 -0.30 0.07 -0.03 0.01 2.4
883 n PT 0.0 -0.2 -0.0 -0.30 0.07 -0.03 0.01 6.9
885 v PT 0.0 -0.2 -0.0 -0.30 0.07 -0.03 0.01 6.7
885 n PT 0.0 -0.2 -0.0 -0.31 0.03 -0.03 0.01 6.3
N13 v ZE 0.0 0.0 0.0 -0.31 0.10 -0.03 0.02 8.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 205
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 55

877 n PT 0.0 -0.2 -0.0 -0.05 0.00 0.00 0.00 1.0

949 v PT 0.1 -0.2 0.0 -0.05 0.00 0.00 0.00 1.0
949 n PT 0.1 -0.2 0.0 -0.05 0.00 0.00 0.00 0.3
951 v PT 0.1 -0.2 0.0 0.00 0.00 0.00 0.00 0.3

L i n e 56

855 n PT 0.1 -0.4 0.4 -0.11 0.19 -0.05 0.10 6.5

853 v PT 0.1 -0.4 0.4 -0.11 0.18 -0.05 0.09 5.8
851 v Elb -0.3 0.0 0.3 -0.11 0.06 -0.05 0.02 3.1
851 m Elb -0.4 0.0 0.3 -0.10 0.09 -0.04 0.02 3.5
851 n Elb -0.4 0.0 0.3 -0.03 0.13 -0.01 0.06 3.6
S215 v AR -0.6 -0.1 -0.0 -0.03 0.18 -0.01 0.12 6.9
S215 n AR -0.6 -0.1 -0.0 -0.01 0.25 -0.01 0.12 6.9
S161 v PT -2.3 -0.8 -1.4 -0.01 0.12 -0.01 0.08 4.6
849 v Elb -2.4 -0.9 -1.4 -0.01 0.14 -0.01 0.07 4.1
849 m Elb -2.5 -0.9 -1.4 0.10 0.11 -0.04 0.04 4.6
849 n Elb -2.5 -0.9 -1.4 0.17 0.01 -0.05 0.03 3.3
S214 v AR -2.0 -0.7 -0.8 0.48 0.01 -0.05 0.03 3.4
S214 n AR -2.0 -0.7 -0.8 0.47 0.08 -0.05 0.03 3.6
S213 v AR 0.0 0.0 -0.1 0.84 0.08 -0.05 0.23 13.6
S213 n AR 0.0 0.0 -0.1 -0.75 0.00 -0.05 0.23 13.4
847 v Elb 3.5 0.7 0.4 -0.52 0.00 -0.05 0.23 13.5
847 m Elb 3.8 0.7 0.3 -0.36 0.35 -0.05 0.21 19.8
847 n Elb 4.0 0.5 0.0 -0.00 0.49 -0.03 0.18 10.5
845 v Elb 4.1 -1.3 -2.5 -0.00 0.39 -0.03 0.13 7.8
845 m Elb 4.3 -1.4 -2.8 -0.27 0.26 -0.05 0.15 14.4
845 n Elb 4.6 -1.5 -2.9 -0.36 0.00 -0.04 0.17 9.9
843 v Elb 10.6 0.7 -2.1 0.01 0.00 -0.04 0.16 9.0
843 m Elb 10.6 0.8 -2.1 0.02 0.02 0.08 0.14 13.5
843 n Elb 10.4 0.8 -2.0 0.00 0.04 0.15 0.05 8.1
S212 v AR 10.0 0.8 -1.9 0.00 0.05 0.15 0.05 8.1
S212 n AR 10.0 0.8 -1.9 -0.00 0.05 0.15 0.05 8.1
S211 v AR -0.0 0.0 -0.0 -0.00 0.43 0.15 0.60 33.9
S211 n AR -0.0 0.0 -0.0 -0.08 0.62 0.15 0.60 34.2
841 v Elb -6.1 -0.4 -2.4 -0.08 0.43 0.15 0.15 12.3
841 m Elb -6.5 -0.5 -2.6 -0.33 0.27 0.19 0.13 14.9
841 n Elb -6.8 -0.6 -2.6 -0.37 0.18 0.13 0.19 13.0
839 v Elb -8.8 -1.9 -2.3 -0.24 0.18 0.13 0.06 8.0
839 m Elb -9.1 -2.0 -2.4 -0.21 0.19 0.08 0.13 12.5
839 n Elb -9.4 -2.1 -2.4 -0.08 0.26 -0.03 0.17 9.7
837 v Elb -10.3 -2.1 -2.7 -0.08 0.23 -0.03 0.23 13.1
837 m Elb -10.5 -2.3 -2.7 -0.17 0.16 -0.12 0.22 20.8
837 n Elb -10.6 -2.5 -2.6 -0.16 0.16 -0.15 0.20 13.7
835 v Elb -10.4 -3.9 -1.2 -0.16 0.09 -0.15 0.16 11.6
835 m Elb -10.5 -4.0 -1.0 -0.14 0.12 0.00 0.21 19.1
835 n Elb -10.6 -4.1 -0.9 -0.02 0.18 0.14 0.14 10.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 206
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

833 v Elb -14.2 -3.3 -0.4 0.22 0.18 0.14 0.22 14.6
833 m Elb -14.3 -3.2 -0.3 0.05 0.29 0.10 0.26 24.2
833 n Elb -14.3 -3.2 -0.2 -0.16 0.26 0.00 0.30 16.7
S210 v AR -14.3 -3.2 -0.0 -0.16 0.29 0.00 0.35 19.4
S210 n AR -14.3 -3.2 -0.0 -0.34 0.32 0.00 0.35 19.6
S210 -S209 -14.3 -3.2 0.3 -0.34 0.32 0.00 0.35 19.6
S209 v AR -13.4 -2.0 -0.0 -0.34 0.14 0.00 0.06 3.9
S209 n AR -13.4 -2.0 -0.0 -0.45 0.20 0.00 0.06 4.0
S209 -S208 -13.4 -2.0 -0.2 -0.45 0.25 0.00 0.13 7.8
S208 v AR -12.5 -0.6 -0.0 -0.45 0.25 0.00 0.13 7.8
S208 n AR -12.5 -0.6 -0.0 -0.60 0.23 0.00 0.13 8.0
S208 -S207 -12.5 -0.6 -0.1 -0.60 0.23 0.00 0.13 8.0
S207 v AR -11.7 -0.0 -0.0 -0.60 0.22 0.00 0.11 6.9
S207 n AR -11.7 -0.0 -0.0 -0.73 0.22 0.00 0.11 7.0
S207 -S206 -11.7 0.1 -0.1 -0.73 0.23 0.00 0.11 7.3
S206 v AR -10.8 0.1 -0.0 -0.73 0.23 0.00 0.11 7.3
S206 n AR -10.8 0.1 -0.0 -0.86 0.23 0.00 0.11 7.4
S206 -S205 -10.8 0.1 -0.1 -0.86 0.23 0.00 0.11 7.4
S205 v AR -9.9 0.0 -0.0 -0.86 0.23 0.00 0.11 7.3
S205 n AR -9.9 0.0 -0.0 -1.00 0.23 0.00 0.11 7.5
S205 -S204 -9.9 0.0 -0.1 -1.00 0.23 0.00 0.11 7.5
S204 v AR -9.1 -0.0 -0.0 -1.00 0.23 0.00 0.11 7.5
S204 n AR -9.1 -0.0 -0.0 -1.14 0.23 0.00 0.11 7.6
S204 -S203 -9.1 -0.0 -0.1 -1.14 0.23 0.00 0.11 7.6
S203 v AR -8.2 -0.0 -0.0 -1.14 0.23 0.00 0.11 7.6
S203 n AR -8.2 -0.0 -0.0 -1.27 0.23 0.00 0.11 7.8
S203 -S202 -8.2 -0.0 -0.1 -1.27 0.23 0.00 0.11 7.8
S202 v AR -7.4 -0.0 -0.0 -1.27 0.23 0.00 0.11 7.8
S202 n AR -7.4 -0.0 -0.0 -1.41 0.23 0.00 0.11 7.9
S202 -S201 -7.4 -0.0 -0.1 -1.41 0.23 0.00 0.11 7.9
S201 v AR -6.5 -0.0 -0.0 -1.41 0.23 0.00 0.11 7.9
S201 n AR -6.5 -0.0 -0.0 -1.54 0.23 0.00 0.11 8.1
S201 -S200 -6.5 -0.0 -0.1 -1.54 0.23 0.00 0.11 8.1
S200 v AR -5.6 -0.0 -0.0 -1.54 0.23 0.00 0.11 8.1
S200 n AR -5.6 -0.0 -0.0 -1.68 0.23 0.00 0.11 8.2
S200 -S199 -5.6 -0.0 -0.1 -1.68 0.23 0.00 0.11 8.2
S199 v AR -4.8 -0.0 -0.0 -1.68 0.23 0.00 0.11 8.2
S199 n AR -4.8 -0.0 -0.0 -1.81 0.23 0.00 0.11 8.4
S199 -S198 -4.8 -0.0 -0.1 -1.81 0.23 0.00 0.11 8.4
S198 v AR -3.9 -0.0 -0.0 -1.81 0.23 0.00 0.11 8.4
S198 n AR -3.9 -0.0 -0.0 -1.95 0.23 0.00 0.11 8.5
S198 -S197 -3.9 -0.0 -0.1 -1.95 0.23 0.00 0.11 8.5
S197 v AR -3.1 -0.0 -0.0 -1.95 0.23 0.00 0.11 8.5
S197 n AR -3.1 -0.0 -0.0 -2.08 0.23 0.00 0.11 8.7
S197 -S196 -3.1 -0.0 -0.1 -2.08 0.23 0.00 0.11 8.7
S196 v AR -2.2 -0.0 -0.0 -2.08 0.23 0.00 0.11 8.7
S196 n AR -2.2 -0.0 -0.0 -2.22 0.23 0.00 0.11 8.8
S196 -S195 -2.2 -0.0 -0.1 -2.22 0.23 0.00 0.11 8.8
S195 v AR -1.4 -0.0 -0.0 -2.22 0.23 0.00 0.11 8.8
S195 n AR -1.4 -0.0 -0.0 -2.35 0.23 0.00 0.11 9.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 207
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S195 -S194 -1.4 -0.0 -0.1 -2.35 0.23 0.00 0.11 9.0
S194 v AR -0.5 -0.0 -0.0 -2.35 0.23 0.00 0.11 9.0
S194 n AR -0.5 -0.0 -0.0 -2.49 0.23 0.00 0.11 9.1
S194 -S193 -0.5 -0.0 -0.1 -2.49 0.23 0.00 0.11 9.1
S193 v AR 0.3 0.0 -0.0 -2.49 0.23 0.00 0.11 9.1
S193 n AR 0.3 0.0 -0.0 -2.35 0.23 0.00 0.11 9.0
S193 -S192 1.2 0.0 -0.1 -2.35 0.23 0.00 0.11 9.0
S192 v AR 1.2 0.0 -0.0 -2.35 0.23 0.00 0.11 9.0
S192 n AR 1.2 0.0 -0.0 -2.22 0.23 0.00 0.11 8.8
S192 -S191 2.0 0.0 -0.1 -2.22 0.23 0.00 0.11 8.8
S191 v AR 2.0 0.0 -0.0 -2.22 0.23 0.00 0.11 8.8
S191 n AR 2.0 0.0 -0.0 -1.07 0.23 0.00 0.11 7.6
S191 -S190 2.9 0.0 -0.1 -1.07 0.23 0.00 0.11 7.6
S190 v AR 2.9 0.0 -0.0 -1.07 0.23 0.00 0.11 7.5
S190 n AR 2.9 0.0 -0.0 -0.94 0.22 0.00 0.11 7.4
S190 -S189 3.8 0.0 -0.1 -0.94 0.23 0.00 0.12 7.6
S189 v AR 3.8 0.0 -0.0 -0.94 0.23 0.00 0.12 7.6
S189 n AR 3.8 0.0 -0.0 -0.80 0.23 0.00 0.12 7.4
S189 -S188 4.6 0.0 -0.2 -0.80 0.23 0.00 0.12 7.4
S188 v AR 4.6 0.0 -0.0 -0.80 0.22 0.00 0.10 6.7
S188 n AR 4.6 0.0 -0.0 -0.67 0.21 0.00 0.10 6.5
S187 v AR 5.5 0.1 -0.0 -0.67 0.24 0.00 0.15 9.3
S187 n AR 5.5 0.1 -0.0 -0.51 0.29 0.00 0.15 9.2
S187 -S186 6.4 0.1 -0.4 -0.51 0.29 0.00 0.15 9.2
S186 v AR 6.4 0.1 -0.0 -0.51 0.16 0.00 0.05 3.5
S186 n AR 6.4 0.1 -0.0 -0.47 0.03 0.00 0.05 3.4
S186 -S185 7.2 -0.1 0.9 -0.47 0.48 0.00 0.72 39.9
S185 v AR 7.2 -0.1 -0.0 -0.47 0.48 0.00 0.72 39.9
S185 n AR 7.2 -0.1 -0.0 -0.04 0.95 0.00 0.72 39.5
831 v Elb 7.4 -0.3 -2.1 -0.04 0.85 0.00 0.07 5.3
831 m Elb 7.4 -0.3 -2.4 0.56 0.62 0.01 0.00 3.2
831 n Elb 7.1 -0.3 -2.5 0.82 0.04 0.01 0.03 3.1
829 v Elb -3.6 -1.0 -3.8 0.13 0.04 0.01 0.23 12.8
829 m Elb -3.6 -1.0 -3.9 0.06 0.12 0.03 0.24 21.3
829 n Elb -3.6 -1.0 -3.9 -0.04 0.11 0.04 0.25 13.7
~101 -~131 -3.6 -1.9 -3.9 -0.04 0.33 0.04 0.28 15.7
827 v Elb -2.8 -1.9 -0.3 -0.04 0.33 0.04 0.07 5.2
827 m Elb -2.7 -1.9 -0.1 -0.27 0.21 0.02 0.10 9.8
827 n Elb -2.5 -1.9 -0.1 -0.35 0.04 -0.02 0.11 6.7
825 v Elb -0.1 -0.3 -0.6 -0.60 0.04 -0.02 0.06 4.4
825 m Elb -0.0 -0.2 -0.5 -0.44 0.43 0.01 0.05 5.0
825 n Elb -0.0 -0.1 -0.5 -0.01 0.62 0.03 0.02 4.2
S184 v AR 0.0 -0.0 -0.0 -0.01 0.68 0.03 0.26 14.9
S184 n AR 0.0 -0.0 -0.0 -0.18 0.23 0.03 0.26 14.7
S184 -S183 -0.1 1.0 0.7 -0.18 0.29 0.03 0.36 20.2
S183 v AR -0.1 1.0 -0.0 -0.18 0.29 0.03 0.36 20.2
S183 n AR -0.1 1.0 -0.0 0.02 0.38 0.03 0.36 20.0
819 v Elb -0.6 1.8 -4.9 0.02 0.02 0.03 0.13 7.2
819 m Elb -0.6 1.7 -5.0 -0.01 0.04 0.02 0.13 11.4
819 n Elb -0.6 1.7 -5.1 -0.05 0.02 -0.00 0.12 7.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 208
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

817 v PT -0.2 0.5 -5.5 -0.33 0.02 -0.00 0.09 5.6

817 n PT -0.2 0.5 -5.5 -0.33 0.02 -0.00 0.09 1.0
981 v PT -0.2 0.4 -5.6 -0.70 0.02 -0.00 0.09 1.0
981 n PT -0.2 0.4 -5.6 -0.70 0.02 -0.00 0.09 5.8
979 v PT -0.1 0.2 -5.7 -0.80 0.02 -0.00 0.08 5.6
977 v PT -0.1 0.2 -5.7 -0.81 0.02 -0.00 0.08 5.5
977 n PT -0.1 0.2 -5.7 -1.07 0.02 -0.00 0.02 3.0
975 v PT -0.1 0.2 -5.8 -1.08 0.02 -0.00 0.02 2.9
A014 v EM -0.1 0.2 -5.8 -1.08 0.02 -0.00 0.02 2.9
A014 n EM -0.1 0.2 -5.8 -1.13 0.02 -0.00 0.02 3.0
969 v PT -0.1 0.2 -5.8 -1.14 0.02 -0.00 0.02 2.9
969 n PT -0.1 0.2 -5.8 -1.14 0.02 -0.00 0.02 0.5
967 v PT -0.1 0.1 -5.8 -1.50 0.02 -0.00 0.02 0.6
967 n PT -0.1 0.1 -5.8 -1.50 0.02 -0.00 0.02 3.1
S182 v AR -0.1 0.1 -5.9 -1.57 0.02 -0.00 0.01 3.0
BC05 v AR 0.0 -0.1 -6.1 -1.67 0.02 -0.00 0.00 2.5

L i n e 57

873 n PT 0.0 -0.3 -0.0 -0.00 0.10 -0.00 0.01 1.8

8951 v PT 0.1 -0.3 -0.1 0.00 0.09 -0.00 0.00 1.7
A016 v EM 0.1 -0.3 -0.1 0.00 0.09 0.00 0.00 1.7
A016 n EM 0.1 -0.3 -0.1 0.00 0.04 -0.00 0.00 1.7
947 v EM 0.1 -0.3 -0.1 0.00 0.03 -0.00 0.00 1.7

L i n e 58

913 n PT 0.0 -0.2 -0.0 0.00 0.00 0.00 0.00 0.9

933 v PT 0.0 -0.2 -0.1 0.00 0.00 0.00 0.00 0.9

L i n e 59

977 n PT -0.1 0.2 -5.7 0.00 0.26 0.00 0.06 11.8

987 v PT -0.1 0.2 -5.7 0.00 0.26 0.00 0.04 8.0
A015 v EM -0.1 0.2 -5.7 0.00 0.26 0.00 0.04 8.0
A015 n EM -0.1 0.2 -5.7 0.00 0.23 -0.00 0.04 7.9
989 v PT -0.1 0.2 -5.7 0.00 0.23 -0.00 0.02 5.3
989 n PT -0.1 0.2 -5.7 0.00 0.23 0.00 0.02 0.8
991 v EM -0.0 0.1 -5.7 0.00 0.02 0.00 0.00 0.5

L i n e 60

879 n PT 0.0 -0.2 -0.0 0.00 0.00 0.00 0.00 0.9

955 v PT -0.0 -0.2 -0.1 0.00 0.00 0.00 0.00 0.9

L i n e 61

N16 n ZE 0.0 0.0 0.0 -1.17 0.03 -0.01 0.03 10.4

A020 v EM 0.0 -0.0 0.0 -1.16 0.03 -0.01 0.03 10.2
A020 n EM 0.0 -0.0 0.0 -1.12 0.03 -0.01 0.03 10.1
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 209
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

775 v PT 0.0 -0.0 0.0 -1.12 0.03 -0.01 0.03 10.1

773 v PT 0.0 -0.0 0.0 -1.12 0.03 -0.01 0.03 9.9
773 n PT 0.0 -0.0 0.0 -1.12 0.03 -0.01 0.03 5.5
771 v PT 0.0 -0.0 0.0 -1.11 0.03 -0.01 0.03 5.5
769 v PT 0.0 -0.0 0.1 -1.10 0.03 -0.01 0.02 5.4
769 n PT 0.0 -0.0 0.1 -1.04 0.03 -0.01 0.03 5.6
767 v PT 0.0 -0.0 0.1 -0.97 0.03 -0.01 0.03 5.5
767 n PT 0.0 -0.0 0.1 -0.97 0.03 -0.01 0.03 1.4
765 v PT 0.0 -0.0 0.2 -0.69 0.03 -0.01 0.03 1.4
765 n PT 0.0 -0.0 0.2 -0.69 0.03 -0.01 0.03 5.3
763 v PT 0.1 -0.0 0.2 -0.62 0.03 -0.01 0.03 5.2
763 n PT 0.1 -0.0 0.2 -0.57 0.03 -0.01 0.02 5.1
757 v PT 0.1 -0.0 0.3 -0.50 0.03 -0.01 0.02 5.1
757 n PT 0.1 -0.0 0.3 -0.50 0.03 -0.01 0.02 1.4
755 v PT 0.1 -0.0 0.3 -0.14 0.03 -0.01 0.02 1.4
755 n PT 0.1 -0.0 0.3 -0.14 0.03 -0.01 0.02 5.0
753 v PT 0.1 -0.0 0.4 -0.09 0.03 -0.01 0.02 5.0
751 v Elb 0.1 -0.0 0.4 -0.09 0.03 -0.01 0.02 5.0
751 m Elb 0.1 -0.1 0.4 -0.06 0.05 -0.01 0.02 5.2
751 n Elb 0.1 -0.1 0.4 -0.02 0.06 -0.00 0.02 4.9
749 v PT 0.0 -0.3 0.3 -0.02 0.08 -0.00 0.04 5.2
679 v PT 0.0 -0.4 0.3 -0.02 0.08 -0.00 0.04 5.3

L i n e 62

769 n PT 0.0 -0.0 0.1 0.00 0.05 -0.00 0.01 9.8

785 v PT -0.0 -0.0 0.1 0.00 0.05 -0.00 0.00 3.0
785 n PT -0.0 -0.0 0.1 0.00 0.05 0.00 0.00 0.9
787 v PT -0.0 0.0 0.1 0.00 0.00 0.00 0.00 0.9

L i n e 63

763 n PT 0.1 -0.0 0.2 0.00 0.05 0.00 0.01 5.4

779 v PT 0.1 -0.1 0.2 0.00 0.05 0.00 0.00 2.7
779 n PT 0.1 -0.1 0.2 0.00 0.05 0.00 0.00 0.9
781 v PT 0.1 -0.1 0.2 0.00 0.00 0.00 0.00 0.9

L i n e 64

679 n PT 0.0 -0.4 0.3 -0.12 0.21 -0.03 0.05 5.7

677 v PT 0.0 -0.3 0.3 -0.12 0.23 -0.03 0.05 5.7
S179 v HR -0.0 -0.3 0.3 -0.12 0.26 -0.03 0.08 6.5
S179 n HR -0.0 -0.3 0.3 -0.12 0.17 -0.03 0.08 6.5
675 v Elb -0.5 0.1 0.4 -0.12 0.07 -0.03 0.02 5.1
675 m Elb -0.5 0.1 0.4 -0.11 0.09 -0.03 0.02 5.3
675 n Elb -0.5 0.0 0.3 -0.03 0.14 -0.01 0.04 5.2
S178 v AR -0.7 -0.1 -0.0 -0.03 0.22 -0.01 0.14 9.0
S178 n AR -0.7 -0.1 -0.0 -0.01 0.26 -0.01 0.14 9.0
S129 v PT -2.4 -0.9 -1.4 -0.01 0.11 -0.01 0.08 6.3
673 v Elb -2.5 -0.9 -1.4 -0.01 0.13 -0.01 0.07 6.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 210
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

673 m Elb -2.5 -0.9 -1.4 0.10 0.11 -0.04 0.05 6.7
673 n Elb -2.6 -1.0 -1.4 0.16 0.01 -0.04 0.04 5.6
S177 v AR -2.0 -0.7 -0.8 0.47 0.01 -0.04 0.04 5.7
S177 n AR -2.0 -0.7 -0.8 0.46 0.07 -0.04 0.04 5.7
S176 v AR 0.0 0.0 -0.0 0.84 0.07 -0.04 0.20 12.9
S176 n AR 0.0 0.0 -0.0 -0.74 0.02 -0.04 0.20 12.7
671 v Elb 3.8 0.8 0.5 -0.47 0.02 -0.04 0.17 11.1
671 m Elb 4.1 0.8 0.4 -0.31 0.34 -0.05 0.16 15.4
671 n Elb 4.2 0.6 0.1 0.02 0.45 -0.02 0.13 8.5
669 v Elb 4.3 -0.6 -1.5 0.02 0.37 -0.02 0.09 6.8
669 m Elb 4.5 -0.8 -1.7 -0.24 0.27 -0.05 0.11 11.1
669 n Elb 4.7 -0.8 -1.8 -0.35 0.02 -0.04 0.12 8.3
667 v Elb 10.3 0.8 -1.1 -0.01 0.02 -0.04 0.15 9.7
667 m Elb 10.3 0.8 -1.1 0.01 0.02 0.08 0.14 14.1
667 n Elb 10.1 0.8 -1.0 -0.00 0.03 0.16 0.05 9.0
S175 v AR 9.7 0.8 -0.9 -0.00 0.04 0.16 0.05 9.0
S174 v AR -0.0 0.0 -0.0 -0.00 0.43 0.16 0.59 33.8
S174 n AR -0.0 0.0 -0.0 -0.09 0.62 0.16 0.59 34.1
665 v Elb -5.8 -0.4 -2.9 -0.09 0.42 0.16 0.15 12.8
665 m Elb -6.2 -0.5 -3.1 -0.33 0.25 0.19 0.13 15.3
665 n Elb -6.5 -0.7 -3.2 -0.36 0.17 0.13 0.19 13.4
663 v Elb -8.4 -2.3 -2.9 -0.23 0.17 0.13 0.05 8.5
663 m Elb -8.7 -2.5 -2.9 -0.22 0.17 0.09 0.11 11.8
663 n Elb -9.0 -2.5 -3.1 -0.09 0.25 -0.01 0.16 9.8
661 v Elb -10.4 -2.7 -3.7 -0.09 0.20 -0.01 0.26 14.8
661 m Elb -10.6 -2.8 -3.8 -0.17 0.13 -0.11 0.25 23.4
661 n Elb -10.6 -3.0 -3.6 -0.15 0.14 -0.16 0.22 15.2
659 v Elb -10.3 -4.7 -1.2 -0.15 0.10 -0.16 0.13 11.6
659 m Elb -10.4 -4.8 -1.0 -0.06 0.17 -0.03 0.20 18.5
659 n Elb -10.6 -4.8 -0.9 0.07 0.17 0.12 0.15 11.1
657 v Elb -14.3 -3.9 -0.4 0.31 0.17 0.12 0.22 14.2
657 m Elb -14.4 -3.9 -0.4 0.13 0.34 0.08 0.25 23.4
657 n Elb -14.4 -3.8 -0.3 -0.15 0.35 0.00 0.29 16.6
S173 v AR -14.4 -3.8 -0.0 -0.15 0.39 0.00 0.36 20.5
S173 n AR -14.4 -3.8 -0.0 -0.35 0.33 0.00 0.36 20.7
S173 -S172 -14.4 -3.8 0.3 -0.35 0.33 0.00 0.36 20.7
S172 v AR -13.5 -2.0 -0.0 -0.35 0.13 0.00 0.06 5.8
S172 n AR -13.5 -2.0 -0.0 -0.46 0.20 0.00 0.06 5.9
S172 -S171 -13.5 -2.0 -0.2 -0.46 0.25 0.00 0.13 8.9
S171 v AR -12.6 -0.5 -0.0 -0.46 0.25 0.00 0.13 8.9
S171 n AR -12.6 -0.5 -0.0 -0.60 0.23 0.00 0.13 9.0
S170 v AR -11.7 0.1 -0.0 -0.60 0.22 0.00 0.11 7.9
S170 n AR -11.7 0.1 -0.0 -0.74 0.22 0.00 0.11 8.0
S170 -S169 -11.7 0.1 -0.1 -0.74 0.23 0.00 0.11 8.3
S169 v AR -10.9 0.1 -0.0 -0.74 0.23 0.00 0.11 8.3
S169 n AR -10.9 0.1 -0.0 -0.87 0.23 0.00 0.11 8.4
S169 -S166 -10.9 0.1 -0.1 -0.87 0.23 0.00 0.11 8.4
S166 v AR -10.0 0.1 -0.0 -0.87 0.23 0.00 0.11 8.3
S166 n AR -10.0 0.1 -0.0 -1.01 0.23 0.00 0.11 8.4
S166 -S163 -10.0 0.1 -0.1 -1.01 0.23 0.00 0.11 8.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 211
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S163 v AR -9.1 -0.0 -0.0 -1.01 0.23 0.00 0.11 8.5

S163 n AR -9.1 -0.0 -0.0 -1.14 0.23 0.00 0.11 8.6
S163 -S162 -9.1 -0.0 -0.1 -1.14 0.23 0.00 0.11 8.6
S162 v AR -8.3 -0.0 -0.0 -1.14 0.23 0.00 0.11 8.6
S162 n AR -8.3 -0.0 -0.0 -1.28 0.23 0.00 0.11 8.7
S162 -S160 -8.3 -0.0 -0.1 -1.28 0.23 0.00 0.11 8.7
S160 v AR -7.4 -0.0 -0.0 -1.28 0.23 0.00 0.11 8.7
S160 n AR -7.4 -0.0 -0.0 -1.41 0.23 0.00 0.11 8.9
S160 -S159 -7.4 -0.0 -0.1 -1.41 0.23 0.00 0.11 8.9
S159 v AR -6.5 -0.0 -0.0 -1.41 0.23 0.00 0.11 8.9
S159 n AR -6.5 -0.0 -0.0 -1.55 0.23 0.00 0.11 9.0
S159 -S158 -6.5 -0.0 -0.1 -1.55 0.23 0.00 0.11 9.0
S158 v AR -5.7 -0.0 -0.0 -1.55 0.23 0.00 0.11 9.0
S158 n AR -5.7 -0.0 -0.0 -1.68 0.23 0.00 0.11 9.1
S158 -S157 -5.7 -0.0 -0.1 -1.68 0.23 0.00 0.11 9.1
S157 v AR -4.8 -0.0 -0.0 -1.68 0.23 0.00 0.11 9.1
S157 n AR -4.8 -0.0 -0.0 -1.82 0.23 0.00 0.11 9.3
S157 -S156 -4.8 -0.0 -0.1 -1.82 0.23 0.00 0.11 9.3
S156 v AR -3.9 -0.0 -0.0 -1.82 0.23 0.00 0.11 9.3
S156 n AR -3.9 -0.0 -0.0 -1.95 0.23 0.00 0.11 9.4
S156 -S155 -3.9 -0.0 -0.1 -1.95 0.23 0.00 0.11 9.4
S155 v AR -3.1 -0.0 -0.0 -1.95 0.23 0.00 0.11 9.4
S155 n AR -3.1 -0.0 -0.0 -2.09 0.23 0.00 0.11 9.5
S155 -S154 -3.1 -0.0 -0.1 -2.09 0.23 0.00 0.11 9.5
S154 v AR -2.2 -0.0 -0.0 -2.09 0.23 0.00 0.11 9.5
S154 n AR -2.2 -0.0 -0.0 -2.23 0.23 0.00 0.11 9.7
S154 -S153 -2.2 -0.0 -0.1 -2.23 0.23 0.00 0.11 9.7
S153 v AR -1.4 -0.0 -0.0 -2.23 0.23 0.00 0.11 9.7
S153 n AR -1.4 -0.0 -0.0 -2.36 0.23 0.00 0.11 9.8
S153 -S152 -1.4 -0.0 -0.1 -2.36 0.23 0.00 0.11 9.8
S152 v AR -0.5 -0.0 -0.0 -2.36 0.23 0.00 0.11 9.8
S152 n AR -0.5 -0.0 -0.0 -2.50 0.23 0.00 0.11 9.9
S152 -S151 -0.5 -0.0 -0.1 -2.50 0.23 0.00 0.11 9.9
S151 v AR 0.3 0.0 -0.0 -2.50 0.23 0.00 0.11 9.9
S151 n AR 0.3 0.0 -0.0 -2.36 0.23 0.00 0.11 9.8
S151 -S150 1.2 0.0 -0.1 -2.36 0.23 0.00 0.11 9.8
S150 v AR 1.2 0.0 -0.0 -2.36 0.23 0.00 0.11 9.8
S150 n AR 1.2 0.0 -0.0 -2.23 0.23 0.00 0.11 9.7
S150 -S149 2.0 0.0 -0.1 -2.23 0.23 0.00 0.11 9.7
S149 v AR 2.0 0.0 -0.0 -2.23 0.23 0.00 0.11 9.7
S149 n AR 2.0 0.0 -0.0 -0.66 0.23 0.00 0.11 8.2
S149 -S148 2.9 -0.0 -0.1 -0.66 0.23 0.00 0.11 8.2
S148 v AR 2.9 -0.0 -0.0 -0.66 0.22 0.00 0.11 8.0
S148 n AR 2.9 -0.0 -0.0 -0.53 0.22 0.00 0.11 7.9
S148 -S147 3.8 0.1 -0.1 -0.53 0.23 0.00 0.12 8.4
S147 v AR 3.8 0.1 -0.0 -0.53 0.23 0.00 0.12 8.4
S147 n AR 3.8 0.1 -0.0 -0.39 0.24 0.00 0.12 8.3
S147 -S146 4.7 0.3 -0.2 -0.39 0.24 0.00 0.12 8.3
S146 v AR 4.7 0.3 -0.0 -0.39 0.21 0.00 0.08 6.5
S146 n AR 4.7 0.3 -0.0 -0.28 0.17 0.00 0.08 6.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 212
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S145 v AR 5.5 0.6 -0.0 -0.28 0.28 0.00 0.25 14.6

S145 n AR 5.5 0.6 -0.0 -0.03 0.55 0.00 0.25 14.5
655 v Elb 5.6 0.6 -0.2 -0.03 0.51 0.00 0.12 8.0
655 m Elb 5.6 0.6 -0.2 0.33 0.37 0.02 0.08 8.7
655 n Elb 5.6 0.6 -0.3 0.49 0.04 0.03 0.05 6.0
653 v Elb 2.9 1.3 -1.0 0.12 0.04 0.03 0.08 6.6
653 m Elb 2.8 1.2 -1.0 0.05 0.10 0.03 0.09 9.5
653 n Elb 2.8 1.2 -1.0 -0.03 0.09 0.01 0.10 7.1
~191 -S103 2.8 1.2 -1.0 -0.03 0.15 0.01 0.12 8.0
S103 v PT 1.9 0.8 -0.1 -0.03 0.15 0.01 0.06 5.7
651 v Elb 1.4 0.5 0.6 -0.03 0.25 0.01 0.09 6.8
651 m Elb 1.4 0.5 0.7 -0.21 0.17 -0.01 0.11 11.5
651 n Elb 1.3 0.4 0.7 -0.28 0.04 -0.03 0.12 8.0
649 v PT 0.0 0.0 0.3 -0.51 0.04 -0.03 0.09 7.0
649 n PT 0.0 0.0 0.3 -0.56 0.04 -0.03 0.09 7.3
647 v PT 0.0 0.0 0.2 -0.57 0.04 -0.03 0.09 7.3
645 v PT -0.0 0.0 0.2 -0.58 0.04 -0.03 0.09 7.3
645 n PT -0.0 0.0 0.2 -0.58 0.04 -0.03 0.09 6.2
643 v PT -0.1 0.0 0.2 -0.59 0.04 -0.03 0.09 6.2
639 v PT -0.4 0.0 0.0 -0.73 0.04 -0.03 0.09 6.2
637 v PT -0.5 0.0 0.0 -0.74 0.04 -0.03 0.09 6.2
637 n PT -0.5 0.0 0.0 -0.74 0.04 -0.03 0.09 7.4
9552 v PT -0.5 0.1 0.0 -0.74 0.04 -0.03 0.09 7.4
9552 n PT -0.5 0.1 0.0 0.74 0.04 0.03 0.09 7.4
9557 v Elb -0.5 0.1 0.0 -0.74 0.05 -0.03 0.09 7.4
9557 m Elb -0.5 0.1 -0.0 -0.70 0.27 -0.01 0.09 10.1
9557 n Elb -0.5 0.1 -0.0 -0.55 0.52 0.01 0.08 6.7
S168 v AR -0.5 0.1 -0.0 -0.55 0.52 0.01 0.08 6.7
S168 n AR -0.5 0.1 -0.0 -0.05 0.43 0.01 0.08 6.2
9556 v Elb -0.5 0.1 -0.0 -0.05 0.43 0.01 0.08 6.2
9556 m Elb -0.5 0.1 -0.1 -0.21 0.37 0.02 0.08 9.3
9556 n Elb -0.5 0.1 -0.1 -0.33 0.26 0.04 0.09 7.4
9353 v PT -0.3 0.0 -0.2 -0.33 0.14 0.04 0.21 12.7
9353 n PT -0.3 0.0 -0.2 -0.33 0.14 0.04 0.21 2.3
9355 v PT -0.1 0.0 -0.1 -0.33 0.42 0.04 0.11 1.5
9355 n PT -0.1 0.0 -0.1 -0.33 0.42 0.04 0.11 8.1
S167 v AR -0.0 -0.0 -0.0 -0.33 0.50 0.04 0.10 8.1
S167 n AR -0.0 -0.0 -0.0 -0.38 0.09 0.04 0.10 7.6
627 v Elb 0.0 -0.0 0.0 -0.38 0.08 0.04 0.09 7.3
627 m Elb 0.0 -0.1 0.0 -0.24 0.30 0.01 0.09 9.3
627 n Elb 0.0 -0.1 -0.0 0.04 0.38 -0.02 0.05 5.7
625 v Elb -0.1 -0.2 -0.2 0.04 0.38 -0.02 0.05 5.7
625 m Elb -0.1 -0.2 -0.2 -0.24 0.29 0.00 0.09 9.4
625 n Elb -0.1 -0.2 -0.2 -0.38 0.04 0.03 0.10 7.3
623 v Elb 0.1 -0.2 -0.2 -0.38 0.13 0.03 0.14 9.2
623 m Elb 0.1 -0.2 -0.2 -0.29 0.28 0.07 0.12 12.3
623 n Elb 0.1 -0.2 -0.2 -0.04 0.41 0.09 0.08 8.3
621 v Elb -0.0 -0.1 -0.0 -0.04 0.42 0.09 0.03 7.3
621 m Elb -0.0 -0.1 0.0 -0.29 0.31 0.03 0.10 10.9
621 n Elb -0.0 -0.0 0.0 -0.38 0.22 -0.05 0.12 8.7
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 213
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S165 v AR -0.0 0.0 -0.0 -0.38 0.23 -0.05 0.13 9.4

S165 n PT -0.0 0.0 -0.0 -0.23 0.89 -0.05 0.20 13.3
617 v PT 0.0 0.1 -0.1 -0.23 0.82 -0.05 0.09 8.5
617 n PT 0.0 0.1 -0.1 -0.23 0.82 -0.05 0.09 1.7
615 v PT 0.1 0.1 -0.3 -0.23 0.46 -0.05 0.09 1.6
615 n PT 0.1 0.1 -0.3 -0.23 0.46 -0.05 0.09 7.7
613 v PT 0.2 0.2 -0.4 -0.23 0.39 -0.05 0.15 10.2
613 n PT 0.2 0.2 -0.4 -0.23 0.34 -0.05 0.15 10.1
611 v PT 0.2 0.2 -0.5 -0.23 0.32 -0.05 0.18 11.6
611 n PT 0.2 0.2 -0.5 -0.18 0.36 -0.04 0.19 11.6
609 v PT 0.2 0.2 -0.5 -0.18 0.35 -0.04 0.20 12.3
609 n PT 0.2 0.2 -0.5 -0.18 0.35 -0.04 0.20 42.1
607 v PT 0.2 0.2 -0.5 -0.18 0.35 -0.04 0.22 45.1
607 n PT 0.2 0.2 -0.5 -0.23 0.31 -0.05 0.21 45.2
A022 v EM 0.2 0.2 -0.5 -0.23 0.31 -0.05 0.21 45.3
A022 n EM 0.2 0.2 -0.5 -0.23 0.29 -0.05 0.21 45.2
605 v PT 0.2 0.2 -0.5 -0.23 0.28 -0.05 0.23 48.5
605 n PT 0.2 0.2 -0.5 -0.23 0.28 -0.05 0.23 7.3
605 -603 0.3 0.3 -0.5 -0.23 0.28 -0.05 0.25 7.8
603 v PT 0.3 0.3 -0.5 -0.23 0.22 -0.05 0.24 7.6
603 n PT 0.3 0.3 -0.5 -0.23 0.22 -0.05 0.24 50.6
A025 v EM 0.3 0.3 -0.5 -0.23 0.22 -0.05 0.23 48.3
A025 n EM 0.3 0.3 -0.5 -0.23 0.25 -0.05 0.23 48.4
601 v PT 0.3 0.3 -0.5 -0.23 0.25 -0.05 0.23 48.3
601 n PT 0.3 0.3 -0.5 -0.19 0.28 -0.06 0.23 48.2
599 v PT 0.3 0.3 -0.5 -0.19 0.29 -0.06 0.22 46.1
599 n PT 0.3 0.3 -0.5 -0.19 0.29 -0.06 0.22 13.3
597 v PT 0.3 0.2 -0.5 -0.19 0.29 -0.06 0.20 12.8
597 n PT 0.3 0.2 -0.5 -0.23 0.26 -0.05 0.21 12.8
595 v PT 0.4 0.2 -0.4 -0.23 0.27 -0.05 0.19 11.7

L i n e 65

649 n PT 0.0 0.0 0.3 0.00 0.05 -0.00 0.01 9.8

743 v PT 0.1 0.1 0.2 0.00 0.05 -0.00 0.00 3.0
743 n PT 0.1 0.1 0.2 -0.00 0.05 0.00 0.00 0.9
745 v PT 0.1 0.1 0.2 -0.00 0.00 0.00 0.00 0.9

L i n e 66

679 n PT 0.0 -0.4 0.3 -0.09 0.13 -0.00 0.02 4.9

681 v PT 0.1 -0.4 0.3 -0.09 0.11 -0.00 0.02 5.0
S180 v HR 0.6 -0.4 0.3 -0.09 0.18 -0.00 0.08 6.3
S180 n HR 0.6 -0.4 0.3 -0.09 0.10 -0.00 0.08 6.3
683 v Elb 0.7 -0.4 0.3 -0.09 0.08 -0.00 0.07 6.1
683 m Elb 0.7 -0.3 0.3 -0.08 0.08 0.03 0.06 7.4
683 n Elb 0.7 -0.3 0.3 -0.02 0.10 0.04 0.04 5.6
685 v Elb 0.4 -0.1 0.4 -0.02 0.12 0.04 0.03 5.5
685 m Elb 0.4 -0.0 0.4 -0.08 0.11 0.06 0.02 5.6
685 n Elb 0.3 -0.0 0.4 -0.10 0.09 0.04 0.04 5.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 214
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

687 v PT 0.3 -0.0 0.4 -0.10 0.09 0.04 0.04 5.5

689 v PT 0.3 -0.0 0.3 -0.16 0.09 0.04 0.03 5.5
689 n PT 0.3 -0.0 0.3 -0.16 0.09 0.04 0.03 1.4
691 v PT 0.2 -0.0 0.3 -0.52 0.09 0.04 0.01 1.4
691 n PT 0.2 -0.0 0.3 -0.52 0.09 0.04 0.01 5.3
697 v PT 0.2 -0.0 0.2 -0.59 0.09 0.04 0.01 5.4
697 n PT 0.2 -0.0 0.2 -0.64 0.09 0.04 0.02 5.5
699 v PT 0.2 -0.0 0.2 -0.71 0.09 0.04 0.03 5.7
699 n PT 0.2 -0.0 0.2 -0.71 0.09 0.04 0.03 1.4
701 v PT 0.1 -0.0 0.1 -0.99 0.09 0.04 0.05 1.5
701 n PT 0.1 -0.0 0.1 -0.99 0.09 0.04 0.05 6.3
703 v PT 0.0 -0.0 0.1 -1.06 0.09 0.04 0.06 6.8
703 n PT 0.0 -0.0 0.1 -1.11 0.09 0.04 0.07 7.1
705 v PT 0.0 -0.0 0.0 -1.13 0.09 0.04 0.08 7.5
707 v PT 0.0 -0.0 0.0 -1.14 0.09 0.04 0.08 7.6
707 n PT 0.0 -0.0 0.0 -1.14 0.09 0.04 0.08 22.4
709 v PT 0.0 -0.0 0.0 -1.14 0.09 0.04 0.09 23.2
A018 v EM 0.0 -0.0 0.0 -1.14 0.09 0.04 0.09 23.2
A018 n EM 0.0 -0.0 0.0 -1.18 0.09 0.04 0.09 23.3
N15 v ZE -0.0 0.0 0.0 -1.18 0.09 0.04 0.10 24.5

L i n e 67

697 n PT 0.2 -0.0 0.2 0.00 0.05 -0.00 0.01 5.4

791 v PT 0.2 -0.1 0.2 0.00 0.05 -0.00 0.00 2.7
791 n PT 0.2 -0.1 0.2 0.00 0.05 -0.00 0.00 0.9
793 v PT 0.2 -0.1 0.2 0.00 0.00 -0.00 0.00 0.9

L i n e 68

S165 n PT -0.0 0.0 -0.0 -0.08 0.22 -0.00 0.07 41.1

723 v PT 0.1 -0.1 0.0 -0.07 0.22 -0.00 0.04 24.5
723 n PT 0.1 -0.1 0.0 -0.07 0.22 -0.00 0.04 24.4
721 v Elb -0.0 -0.2 0.1 -0.06 0.22 -0.00 0.02 10.2
721 m Elb -0.0 -0.2 0.1 -0.20 0.11 -0.00 0.02 13.3
721 n Elb -0.0 -0.2 0.1 -0.22 0.06 -0.00 0.02 13.7
719 v PT 0.2 0.0 -0.2 -0.22 0.02 -0.00 0.02 11.6
719 n PT 0.2 0.0 -0.2 -0.22 0.02 -0.00 0.02 1.6
717 v PT 0.3 0.1 -0.2 -0.22 0.03 -0.00 0.02 1.5
717 n PT 0.3 0.1 -0.2 -0.22 0.03 -0.00 0.02 11.3
715 v Elb 0.5 0.1 0.1 -0.22 0.07 -0.00 0.02 13.9
715 m Elb 0.5 0.1 0.1 -0.20 0.11 0.00 0.02 13.6
715 n Elb 0.5 0.1 0.1 -0.07 0.22 0.00 0.02 11.0
713 v PT 0.5 0.1 0.0 -0.08 0.22 0.00 0.04 24.6
S164 v PT 0.5 0.1 -0.0 -0.08 0.22 0.00 0.07 41.2

L i n e 69

S164 n PT 0.5 0.1 -0.0 -0.22 0.15 -0.05 0.14 9.2

587 v Elb 0.5 0.1 0.0 -0.22 0.16 -0.05 0.15 9.7
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 215
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

587 m Elb 0.5 0.0 0.1 -0.21 0.19 -0.10 0.13 13.3
587 n Elb 0.5 -0.0 0.1 -0.07 0.28 -0.10 0.11 9.3
585 v PT 0.1 -0.2 0.1 -0.07 0.35 -0.10 0.06 7.9
585 n PT 0.1 -0.2 0.1 -0.07 0.35 -0.10 0.06 1.7
583 v PT -0.1 -0.2 0.2 -0.07 0.60 -0.10 0.17 2.2
583 n PT -0.1 -0.2 0.2 -0.07 0.60 -0.10 0.17 12.2
581 v PT -0.1 -0.3 0.2 -0.08 0.66 -0.10 0.21 14.1
581 n PT -0.1 -0.3 0.2 -0.07 0.66 -0.10 0.21 14.1
579 v Elb -0.1 -0.3 0.2 -0.07 0.66 -0.10 0.21 14.1
579 m Elb -0.2 -0.3 0.2 -0.50 0.45 -0.12 0.25 24.0
579 n Elb -0.2 -0.3 0.1 -0.64 0.23 -0.08 0.27 16.9
577 v PT -0.2 0.1 -0.0 -0.71 0.23 -0.08 0.23 15.0
577 n PT -0.2 0.1 -0.0 -0.71 0.23 -0.08 0.23 14.5
451 v PT -0.2 0.2 -0.1 -0.72 0.23 -0.08 0.23 14.3

L i n e 70

451 n PT -0.2 0.2 -0.1 -0.90 0.70 -0.49 0.12 6.0

453 v PT -0.2 0.3 -0.1 -0.90 0.61 -0.49 0.09 5.8
453 n PT -0.2 0.3 -0.1 -0.90 0.61 -0.49 0.09 5.8
453 -S138 -1.2 1.4 -0.1 -0.90 0.61 -0.49 0.58 8.4
S138 v AR -1.2 1.4 -0.0 -0.90 0.53 -0.49 0.58 8.4
S138 n AR -1.2 1.4 -0.0 -0.57 1.33 -0.49 0.58 9.1
457 v Elb -1.4 1.5 0.1 -0.57 1.17 -0.49 1.01 12.4
457 m Elb -1.5 1.6 0.1 0.26 1.21 -0.97 0.84 20.5
457 n Elb -1.7 1.9 0.1 0.85 0.81 -0.96 0.99 14.6
459 v PT -1.7 1.9 0.1 0.85 0.81 -0.96 0.99 14.6
461 v Elb -1.7 1.9 0.1 0.85 0.81 -0.96 0.99 14.6
461 m Elb -1.8 2.2 -0.1 0.14 1.11 -1.37 0.22 14.2
461 n Elb -1.8 2.3 -0.5 -0.58 0.90 -1.05 0.83 14.1
~267 -~266 -1.8 2.3 -5.2 -0.58 0.90 -1.05 0.83 14.1
463 v Elb 0.0 1.3 -5.2 -0.58 0.65 -1.05 0.64 12.6
463 m Elb 0.1 1.2 -5.3 -0.81 0.40 -0.49 1.11 25.4
463 n Elb 0.0 1.1 -4.9 -0.57 0.75 0.30 1.08 12.2
465 v Elb -0.5 1.0 -0.2 -0.57 1.19 0.30 0.25 5.6
465 m Elb -0.5 0.9 0.3 -0.81 1.12 0.30 0.31 7.9
465 n Elb -0.5 0.8 0.4 -0.58 1.32 0.27 0.26 5.6
S139 v AR -0.3 0.7 -0.0 -0.58 1.48 0.27 0.46 7.0
S139 n AR -0.3 0.7 -0.0 -1.06 0.53 0.27 0.46 6.4
469 v Elb -0.1 0.5 -0.5 -1.06 0.41 0.27 0.34 5.4
469 m Elb -0.3 0.5 -0.7 -0.64 0.92 0.29 0.24 6.4
469 n Elb -0.8 0.7 -0.8 0.07 1.11 0.18 0.20 4.3
471 v Elb -2.0 1.1 -1.0 -0.07 1.11 0.18 0.32 5.0
471 m Elb -2.6 1.3 -0.8 -0.34 1.07 0.42 0.27 7.3
471 n Elb -2.9 1.3 -0.3 -0.34 1.08 0.55 0.08 6.9
473 v Elb -3.0 1.1 1.1 -0.34 1.14 0.55 0.53 8.9
473 m Elb -3.0 1.0 1.6 -0.99 0.71 0.54 0.68 16.3
473 n Elb -2.9 0.9 1.7 -1.06 0.66 0.28 0.80 9.6
S140 v AR -0.0 -0.0 -0.0 -1.06 1.53 0.28 1.77 19.4
S140 n AR -0.0 -0.0 -0.0 -0.33 1.25 0.28 1.77 19.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 216
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

477 v Elb 3.3 -1.0 -4.2 -0.33 0.26 0.28 0.54 6.7
477 m Elb 3.3 -0.9 -4.6 -0.17 0.36 0.59 0.21 7.3
477 n Elb 2.9 -0.7 -4.7 0.01 0.39 0.58 0.25 6.6
479 v Elb 1.5 0.4 -5.0 -0.23 0.39 0.58 0.27 6.8
479 m Elb 1.1 0.6 -4.9 -0.36 0.34 0.61 0.22 7.5
479 n Elb 0.8 0.6 -4.5 -0.20 0.51 0.32 0.53 6.9
S141 v AR 0.0 -0.0 -0.0 -0.20 1.30 0.32 1.82 19.6
S141 n AR 0.0 -0.0 -0.0 -0.24 1.26 0.32 1.82 19.6
483 v Elb -0.4 -0.3 1.3 -0.24 0.86 0.32 0.88 10.3
483 m Elb -0.5 -0.3 1.4 0.38 0.73 0.08 0.80 18.1
483 n Elb -0.6 -0.1 1.4 0.71 0.25 -0.22 0.70 8.1
485 v Elb -1.2 1.4 0.7 -0.01 0.25 -0.22 0.46 5.6
485 m Elb -1.2 1.5 0.6 -0.09 0.25 -0.02 0.49 11.1
485 n Elb -1.1 1.5 0.5 -0.05 0.29 0.16 0.42 5.2
S142 v HR 0.3 0.9 0.0 -0.05 0.84 0.16 0.38 5.2
S142 n HR 0.3 0.9 0.0 -0.05 1.27 0.16 0.38 5.5
487 v Elb 0.4 0.9 -0.0 -0.05 1.22 0.16 0.30 4.9
487 m Elb 0.6 0.8 -0.1 0.76 0.87 0.29 0.09 4.5
487 n Elb 0.6 0.9 -0.2 1.04 0.25 0.28 0.12 3.9
489 v Elb 0.8 1.3 -0.8 0.45 0.25 0.28 0.27 4.6
489 m Elb 0.7 1.4 -0.8 0.09 0.44 0.31 0.31 7.8
489 n Elb 0.6 1.3 -0.8 -0.25 0.30 0.15 0.46 5.6
491 v Elb -0.5 0.4 0.5 -0.25 0.94 0.15 0.56 6.8
491 m Elb -0.6 0.4 0.5 -0.89 0.55 0.19 0.69 15.9
491 n Elb -0.6 0.4 0.5 -1.10 0.25 0.11 0.74 8.5
493 v PT -0.3 0.3 0.0 -1.67 0.25 0.11 0.51 6.4
493 n PT -0.3 0.3 0.0 -1.67 0.25 0.11 0.51 1.3
499 v PT -0.2 0.3 -0.1 -2.54 0.25 0.11 0.45 1.3
499 n PT -0.2 0.3 -0.1 -2.54 0.25 0.11 0.45 6.2
A048 v EM -0.1 0.3 -0.1 -2.58 0.25 0.11 0.44 6.1
A048 n EM -0.1 0.3 -0.1 -2.68 0.25 0.11 0.44 6.1
501 v PT -0.1 0.3 -0.1 -2.69 0.25 0.11 0.44 6.1
503 v PT -0.1 0.3 -0.2 -2.72 0.25 0.11 0.41 5.9

L i n e 71

503 n PT -0.1 0.3 -0.2 -1.14 1.30 -0.26 0.85 10.4

803 v PT -0.1 0.3 -0.2 -1.14 1.22 -0.26 1.03 12.1
803 n PT -0.1 0.3 -0.2 -1.14 1.22 -0.26 1.03 12.1
A067 v EM -0.1 0.3 -0.2 -1.14 1.22 -0.26 1.04 12.1
A067 n EM -0.1 0.3 -0.2 -1.14 1.03 -0.26 1.04 12.0
7881 v PT -0.1 0.4 -0.2 -1.14 0.99 -0.26 1.13 12.9
7881 n PT -0.1 0.4 -0.2 -1.14 0.99 -0.26 1.13 2.7
7881 -7879 -0.1 0.6 -0.2 -1.14 1.36 -0.26 1.22 2.8
7879 v PT -0.1 0.6 -0.2 -1.14 1.36 -0.26 1.08 2.6
7879 n PT -0.1 0.6 -0.2 -1.14 1.36 -0.26 1.08 12.6
A068 v EM -0.1 0.7 -0.2 -1.14 1.41 -0.26 0.97 11.6
A068 n EM -0.1 0.7 -0.2 -1.14 1.60 -0.26 0.97 11.7
7877 v PT -0.1 0.7 -0.2 -1.14 1.60 -0.26 0.97 11.6
7877 n PT -0.1 0.7 -0.2 -0.86 1.76 -0.32 0.95 11.7
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 217
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

7875 v PT -0.1 0.7 -0.2 -0.86 1.80 -0.32 0.83 10.7

7875 n PT -0.1 0.7 -0.2 -0.86 1.80 -0.32 0.83 5.8
7873 v PT -0.1 0.7 -0.1 -0.85 1.85 -0.32 0.71 5.4
7873 n PT -0.1 0.7 -0.1 -1.14 1.69 -0.26 0.74 6.4
SE93 v PT -0.1 0.9 -0.1 -1.14 1.90 -0.26 0.49 5.5
SE91 v Elb -0.1 0.9 -0.1 -1.14 1.90 -0.26 0.49 5.5
SE91 m Elb -0.2 1.0 -0.1 -0.30 2.27 -0.43 0.41 7.5
SE91 n Elb -0.2 1.0 -0.0 0.65 2.27 -0.54 0.48 6.8
S181 v AR -0.2 1.0 -0.0 0.65 2.27 -0.54 0.48 6.8
S181 n AR -0.2 1.0 -0.0 -1.83 2.35 -0.54 0.48 7.0
SE90 v Elb -0.2 1.0 -0.0 -1.83 2.35 -0.54 0.48 7.0
SE90 m Elb -0.2 1.0 0.0 -2.49 1.47 -0.59 0.22 5.9
SE90 n Elb -0.3 1.1 0.1 -2.75 0.60 -0.58 0.17 4.9
7867 v Elb -1.2 1.1 1.0 -1.51 0.60 -0.58 0.88 7.4
7867 m Elb -1.3 1.0 1.1 -1.18 0.87 -0.98 0.47 9.7
7867 n Elb -1.4 0.8 1.1 -0.33 1.27 -0.90 0.46 7.3
7865 v PT -1.5 0.7 1.0 -0.33 0.95 -0.90 0.31 6.7
7863 v Elb -2.3 -0.0 0.6 -0.33 0.61 -0.90 0.50 6.8
7863 m Elb -2.3 -0.2 0.5 -0.58 0.54 -0.81 0.71 12.5
7863 n Elb -2.2 -0.3 0.4 -0.50 0.77 -0.15 1.17 7.9
SE65 v AR -1.9 -0.3 -0.0 -0.50 1.20 -0.15 1.69 11.0
SE65 n AR -1.9 -0.3 -0.0 -1.58 2.50 -0.15 1.69 11.6
SE65 -7819 -1.9 -0.6 -2.0 -1.58 2.50 -0.15 2.74 17.4
7819 v PT 0.6 -0.6 -1.6 -1.58 0.74 -0.15 2.39 15.3
7819 n PT 0.6 -0.6 -1.6 -1.48 0.98 -0.10 2.42 15.5
7885 v Elb 1.4 -1.0 -0.2 -1.48 2.09 -0.10 1.21 8.7
7885 m Elb 1.5 -1.2 0.0 -1.36 2.33 -0.28 1.24 20.2
7885 n Elb 1.3 -1.4 0.0 -0.44 2.81 -0.69 1.06 9.8
SE66 v AR 1.0 -1.5 -0.0 -0.44 2.93 -0.69 1.22 10.6
SE66 n AR 1.0 -1.5 -0.0 0.55 1.70 -0.69 1.22 9.8
7889 v Elb -0.5 -2.1 -0.5 0.55 1.05 -0.69 0.37 6.0
7889 m Elb -0.7 -2.3 -0.6 -0.17 1.08 -0.69 0.58 10.2
7889 n Elb -0.7 -2.6 -0.5 -0.79 0.65 -0.37 0.91 6.9
7891 v Elb -0.3 -3.3 -0.2 -0.79 0.59 -0.37 1.25 8.7
7891 m Elb -0.1 -3.3 -0.1 -0.95 0.41 0.11 1.38 22.3
7891 n Elb -0.0 -3.2 -0.1 -0.55 0.96 0.59 1.19 8.9
7893 v PT -0.0 -3.2 -0.1 -0.55 0.96 0.59 1.19 8.9
N4 v ZE -0.0 -3.2 -0.0 -0.55 1.12 0.59 1.15 8.8
N4 n PT -0.0 -3.2 -0.0 -0.55 1.12 0.59 1.15 3.4
9435 v PT 0.0 -2.8 0.0 -0.55 1.66 0.59 1.55 4.4
9435 n PT 0.0 -2.8 0.0 1.46 0.96 0.38 1.62 0.0
9439 v EM 0.0 -2.8 0.4 1.46 0.96 0.38 2.22 0.0
9439 n EM 0.0 -2.8 0.4 -0.55 1.66 1.15 1.93 0.1
9441 v PT 0.0 -2.0 0.5 -0.55 99.88 1.15 82.96 2.6
9441 n PT 0.0 -2.0 0.5 -41.37 36.20 1.11 130.93 2.0
9443 v PT -0.0 -0.0 0.6 -41.37 191.39 1.11 418.04 7.0
9443 n PT -0.0 -0.0 0.6 0.00 98.41 -0.00 78.73 2.5
9445 v EM -0.0 0.8 0.6 0.00 0.00 -0.00 0.00 0.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 218
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 72

7819 n PT 0.6 -0.6 -1.6 0.15 0.32 -0.11 0.05 7.4

7817 v PT 0.6 -0.6 -1.7 0.15 0.32 -0.11 0.00 6.8
7817 n PT 0.6 -0.6 -1.7 0.15 0.32 -0.11 0.00 11.3
7815 v Elb 0.7 -0.5 -1.8 0.12 0.32 -0.11 0.06 11.7
7815 m Elb 0.8 -0.5 -1.8 -0.15 0.30 -0.10 0.10 14.4
7815 n Elb 0.8 -0.5 -1.8 -0.31 0.12 -0.03 0.14 12.8
7813 v Elb -0.0 0.2 0.1 -0.31 0.33 -0.03 0.19 14.4
7813 m Elb -0.0 0.2 0.2 -0.28 0.36 -0.15 0.16 18.9
7813 n Elb -0.0 0.3 0.3 -0.09 0.46 -0.20 0.08 15.0
7811 v Elb 0.1 0.2 0.5 -0.09 0.50 -0.20 0.11 15.7
7811 m Elb 0.1 0.2 0.5 -0.36 0.38 -0.15 0.18 20.8
7811 n Elb 0.2 0.2 0.5 -0.43 0.32 -0.04 0.22 15.6
7809 v PT 0.2 -0.0 0.3 -0.56 0.32 -0.04 0.10 11.8
7807 v PT 0.2 -0.1 0.3 -0.58 0.32 -0.04 0.11 12.1
7807 n PT 0.2 -0.1 0.3 -0.58 0.07 -0.02 0.08 11.3
7805 v PT 0.2 -0.1 0.2 -0.60 0.07 -0.02 0.08 11.2
7803 v PT 0.1 -0.2 0.1 -0.74 0.07 -0.02 0.05 10.8
7803 n PT 0.1 -0.2 0.1 -0.74 0.07 -0.02 0.05 2.9
7801 v PT 0.1 -0.3 0.0 -1.11 0.07 -0.02 0.04 2.9
7801 n PT 0.1 -0.3 0.0 -1.11 0.07 -0.02 0.04 10.7
7799 v PT 0.1 -0.3 -0.0 -1.19 0.07 -0.02 0.04 10.7
7797 v Elb 0.1 -0.3 -0.0 -1.19 0.07 -0.02 0.04 10.7
7797 m Elb 0.1 -0.3 -0.0 -1.10 0.48 -0.01 0.03 10.8
7797 n Elb 0.0 -0.3 -0.0 -0.84 0.87 -0.01 0.01 10.3
SE67 v AR 0.0 -0.3 -0.0 -0.84 0.87 -0.01 0.01 10.3
SE67 n AR 0.0 -0.3 -0.0 -0.15 0.42 -0.01 0.01 10.2
7793 v Elb 0.0 -0.3 -0.0 -0.15 0.42 -0.01 0.01 10.2
7793 m Elb 0.0 -0.3 -0.1 -0.30 0.32 -0.01 0.02 10.3
7793 n Elb 0.0 -0.3 -0.1 -0.40 0.17 -0.00 0.03 10.3
7791 v PT 0.0 -0.3 -0.1 0.40 0.17 0.00 0.03 10.3
7791 n PT 0.0 -0.3 -0.1 -0.37 0.23 -0.00 0.03 10.3
7789 v PT 0.0 -0.3 -0.1 -0.37 0.23 -0.00 0.04 10.4
7789 n PT 0.0 -0.3 -0.1 -0.37 0.23 -0.00 0.04 14.1
7787 v PT 0.0 -0.3 -0.1 -0.37 0.22 -0.00 0.04 15.1
7787 n PT 0.0 -0.3 -0.1 -0.40 0.16 -0.00 0.04 15.2
A071 v EM 0.0 -0.3 -0.1 -0.40 0.16 -0.00 0.05 15.2
A071 n EM 0.0 -0.3 -0.1 -0.40 0.12 -0.00 0.05 15.2
7785 v PT 0.0 -0.2 -0.1 -0.40 0.11 -0.00 0.05 16.1
7785 n PT 0.0 -0.2 -0.1 -0.40 0.11 -0.00 0.05 2.8
7783 v PT 0.0 -0.1 -0.1 -0.40 0.20 -0.00 0.04 2.8
7783 n PT 0.0 -0.1 -0.1 -0.40 0.20 -0.00 0.04 14.6
A072 v EM 0.0 -0.1 -0.1 -0.40 0.21 -0.00 0.03 13.2
A072 n EM 0.0 -0.1 -0.1 -0.40 0.25 -0.00 0.03 13.2
7781 v PT 0.0 -0.1 -0.1 -0.40 0.25 -0.00 0.03 13.2
7781 n PT 0.0 -0.1 -0.1 -0.36 0.31 -0.00 0.03 13.2
7779 v PT 0.0 -0.1 -0.1 -0.36 0.32 -0.00 0.01 12.3
7779 n PT 0.0 -0.1 -0.1 -0.36 0.32 -0.00 0.01 10.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 219
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

7777 v PT 0.0 -0.1 -0.1 -0.35 0.32 -0.00 0.01 10.2

7777 n PT 0.0 -0.1 -0.1 -0.40 0.26 -0.00 0.01 10.2
7821 v Elb 0.0 -0.0 -0.1 -0.40 0.32 -0.00 0.09 11.4
7821 m Elb -0.0 0.0 -0.1 -0.25 0.45 -0.00 0.11 14.4
7821 n Elb 0.0 0.0 -0.1 -0.05 0.52 0.00 0.13 12.2
SE68 v AR 0.0 0.0 -0.1 -0.05 0.52 0.00 0.13 12.2
SE68 n AR 0.0 0.0 -0.1 -1.23 1.61 0.00 0.13 13.8
7825 v Elb 0.0 0.0 -0.1 -1.23 1.61 0.00 0.13 13.8
7825 m Elb 0.0 0.0 -0.1 -1.74 1.02 0.00 0.07 13.3
7825 n Elb 0.0 0.1 -0.1 -1.99 0.27 0.00 0.04 11.1
7827 v PT 0.0 0.1 -0.1 -1.99 0.27 0.00 0.04 11.1
7829 v PT 0.0 0.1 -0.0 -1.91 0.27 0.00 0.02 10.7
7829 n PT 0.0 0.1 -0.0 -1.91 0.27 0.00 0.02 2.9
7831 v PT 0.1 0.2 0.1 -1.54 0.27 0.00 0.06 2.9
7831 n PT 0.1 0.2 0.1 -1.54 0.27 0.00 0.06 11.2
7833 v PT 0.2 0.3 0.2 -1.39 0.27 0.00 0.17 14.5
7835 v PT 0.2 0.3 0.2 -1.38 0.27 0.00 0.20 15.3
7835 n PT 0.2 0.3 0.2 -1.00 0.05 0.00 0.10 11.9
7837 v PT 0.2 0.3 0.2 -0.98 0.05 0.00 0.10 11.8
SE69 v AR 0.4 -0.7 1.6 -0.21 0.05 0.00 0.11 11.8
7841 v Elb 0.4 -0.6 1.6 -0.17 0.05 0.00 0.12 12.1
7841 m Elb 0.4 -0.6 1.7 -0.14 0.07 0.00 0.12 15.1
7841 n Elb 0.4 -0.5 1.6 -0.05 0.14 -0.00 0.11 11.7
SE70 v AR 0.0 0.0 -0.0 -0.05 0.17 -0.00 0.14 12.5
SE70 n AR 0.0 0.0 -0.0 -0.01 0.42 -0.00 0.14 12.5
7845 v Elb -0.1 0.1 -0.4 -0.01 0.38 -0.00 0.04 10.3
7845 m Elb -0.1 0.2 -0.5 -0.26 0.25 0.01 0.02 10.4
7845 n Elb -0.1 0.3 -0.5 -0.34 0.07 0.03 0.01 10.3
7847 v Elb -0.2 0.8 -0.4 -0.26 0.07 0.03 0.04 10.5
7847 m Elb -0.2 0.9 -0.4 -0.22 0.13 0.02 0.04 11.0
7847 n Elb -0.2 1.0 -0.4 -0.07 0.23 -0.00 0.03 10.3
~615 -~616 -0.9 1.0 -0.6 -0.07 0.23 -0.00 0.13 12.2
7849 v Elb -0.9 -0.2 -0.2 -0.07 0.18 -0.00 0.04 10.4
7849 m Elb -0.9 -0.2 -0.1 0.09 0.19 -0.00 0.02 10.4
7849 n Elb -0.9 -0.1 -0.1 0.21 0.07 -0.00 0.01 10.2
BC15 v AR -0.8 0.1 -0.0 0.24 0.07 -0.00 0.00 10.2

L i n e 73

613 n PT 0.2 0.2 -0.4 0.06 0.00 0.00 0.00 2.5

733 v PT 0.1 0.2 -0.4 0.05 0.00 0.00 0.00 2.5
735 v PT 0.0 0.3 -0.5 0.05 0.00 0.00 0.00 2.5
735 n PT 0.0 0.3 -0.5 0.05 0.00 0.00 0.00 0.9
737 v PT -0.0 0.3 -0.5 0.00 0.00 0.00 0.00 0.9

L i n e 74

S164 n PT 0.5 0.1 -0.0 -0.23 0.83 -0.05 0.18 12.2

591 v PT 0.5 0.1 -0.1 -0.23 0.76 -0.05 0.11 9.2
591 n PT 0.5 0.1 -0.1 -0.23 0.76 -0.05 0.11 1.7
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 220
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

593 v PT 0.4 0.2 -0.3 -0.23 0.40 -0.05 0.14 1.7

593 n PT 0.4 0.2 -0.3 -0.23 0.40 -0.05 0.14 9.8
595 v PT 0.4 0.2 -0.4 -0.23 0.33 -0.05 0.19 11.8

L i n e 75

451 n PT -0.2 0.2 -0.1 -1.12 1.39 -0.27 0.05 4.9

449 v PT -0.1 0.2 -0.0 -1.12 1.49 -0.27 0.26 5.8
S137 v AR 0.0 0.0 -0.0 -1.12 1.61 -0.27 0.69 9.1
S137 n AR 0.0 0.0 -0.0 -0.46 0.96 -0.27 0.69 8.5
445 v Elb 1.6 -1.7 0.1 -0.46 0.69 -0.27 0.41 5.9
445 m Elb 1.6 -1.6 0.1 -0.86 0.23 -0.46 0.27 7.8
445 n Elb 1.7 -1.6 0.1 -0.85 0.46 -0.39 0.34 6.0
443 v Elb 1.7 -1.5 -0.0 -0.91 0.46 -0.39 0.29 5.7
443 m Elb 1.6 -1.4 -0.1 -0.75 0.79 -0.19 0.43 10.2
443 n Elb 1.6 -1.3 -0.0 -0.08 1.16 0.06 0.53 6.3
S136 v AR 1.5 -1.2 -0.0 -0.08 1.35 0.06 1.01 11.0
S136 n AR 1.5 -1.2 -0.0 -0.51 1.04 0.06 1.01 11.1
441 v Elb 1.0 -0.4 -0.5 -0.51 0.26 0.06 0.29 3.9
441 m Elb 0.9 -0.4 -0.5 -0.42 0.33 -0.09 0.29 7.1
441 n Elb 0.8 -0.4 -0.4 -0.09 0.51 -0.21 0.17 3.7
439 v Elb 0.5 -0.8 -0.2 -0.09 0.54 -0.21 0.18 3.8
439 m Elb 0.4 -0.8 -0.1 -0.42 0.39 -0.12 0.29 7.0
439 n Elb 0.3 -0.8 -0.1 -0.51 0.36 0.00 0.30 3.9
S135 v AR -0.0 -0.3 -0.0 -0.51 0.86 0.00 0.58 6.6
S135 n AR -0.0 -0.3 -0.0 -1.23 1.57 0.00 0.58 7.1
437 v PT -0.0 -0.3 -0.0 -1.23 1.53 0.00 0.46 6.0
435 v PT -0.1 -0.2 -0.0 -1.23 1.43 0.00 0.26 4.3
435 n PT -0.1 -0.2 -0.0 -0.88 1.10 0.13 0.33 5.1
433 v PT -0.1 -0.2 -0.0 -0.88 1.00 0.13 0.28 4.6
385 v PT -0.1 -0.1 -0.1 -0.88 0.90 0.13 0.30 4.7
385 n PT -0.1 -0.1 -0.1 -0.51 0.33 0.22 0.41 5.5
405 v PT -0.1 -0.1 -0.1 -0.51 0.24 0.22 0.42 5.5
9518 v PT -0.2 0.1 -0.1 -0.51 0.11 0.22 0.43 5.5
407 v PT -0.2 0.2 -0.1 -0.51 0.11 0.22 0.42 5.4
407 n PT -0.2 0.2 -0.1 -0.51 0.09 0.27 0.39 5.3
409 v PT -0.2 0.2 -0.1 -0.52 0.09 0.27 0.38 5.3
409 n PT -0.2 0.2 -0.1 -0.52 0.09 0.27 0.38 13.4
411 v PT -0.2 0.3 -0.1 -0.52 0.09 0.27 0.38 13.3
411 n PT -0.2 0.3 -0.1 -0.51 0.14 0.23 0.41 13.6
A029 v EM -0.2 0.3 -0.1 -0.51 0.14 0.23 0.41 13.5
A029 n EM -0.2 0.3 -0.1 -0.51 0.20 0.23 0.41 13.6
9295 v PT -0.2 0.3 -0.1 -0.51 0.21 0.23 0.39 13.3
9295 n PT -0.2 0.3 -0.1 -0.51 0.21 0.23 0.39 2.5
9293 v PT -0.2 0.8 0.1 -0.51 0.87 0.23 0.36 2.5
9293 n PT -0.2 0.8 0.1 -0.51 0.87 0.23 0.36 13.3
S133 v AR -0.1 1.1 -0.0 -0.51 1.10 0.23 1.03 31.2
S133 n AR -0.1 1.1 -0.0 0.09 0.91 0.23 1.03 30.7
421 v Elb 0.2 1.4 -1.0 0.09 0.72 0.23 0.35 12.7
421 m Elb 0.3 1.4 -1.3 0.11 0.69 -0.05 0.33 17.6
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 221
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

421 n Elb 0.3 1.4 -1.6 0.06 0.67 -0.24 0.13 8.8
423 v Elb 0.5 1.2 -2.4 0.06 0.58 -0.24 0.15 8.8
423 m Elb 0.5 1.2 -2.7 0.11 0.55 -0.28 0.10 9.1
423 n Elb 0.6 1.2 -3.0 0.09 0.52 -0.21 0.18 8.6
425 v Elb 1.8 1.8 -6.6 0.09 0.19 -0.21 0.37 12.2
425 m Elb 1.8 1.8 -6.8 0.17 0.07 -0.14 0.41 22.0
425 n Elb 1.8 1.7 -6.9 0.12 0.11 -0.00 0.43 12.5
9291 v PT 0.8 0.4 -7.5 -0.27 0.11 -0.00 0.27 8.2
9291 n PT 0.8 0.4 -7.5 -0.27 0.11 0.00 0.27 1.6
1127 v PT 0.6 0.3 -7.6 -0.81 0.11 0.00 0.25 1.5
1125 v PT 0.5 0.2 -7.7 -1.30 0.11 0.00 0.22 1.4
1125 n PT 0.5 0.2 -7.7 -1.30 0.11 0.00 0.22 7.4
A028 v EM 0.5 0.2 -7.8 -1.32 0.11 0.00 0.21 7.1
A028 n EM 0.5 0.2 -7.8 -1.39 0.11 0.00 0.21 7.2
1123 v PT 0.4 0.2 -7.8 -1.39 0.11 0.00 0.21 7.2
1121 v PT 0.4 0.1 -7.8 -1.41 0.11 0.00 0.20 6.9
1121 n PT 0.4 0.1 -7.8 -1.67 0.11 0.00 0.14 5.6
1119 v PT 0.3 0.1 -7.8 -1.69 0.11 0.00 0.13 5.3
A027 v EM 0.3 0.1 -7.8 -1.69 0.11 0.00 0.13 5.3
A027 n EM 0.3 0.1 -7.8 -1.76 0.11 0.00 0.13 5.4
1113 v PT 0.3 0.1 -7.9 -1.78 0.11 0.00 0.12 5.1
1113 n PT 0.3 0.1 -7.9 -1.78 0.11 0.00 0.12 1.0
1111 v PT 0.2 -0.0 -8.0 -2.32 0.11 0.00 0.10 0.9
1111 n PT 0.2 -0.0 -8.0 -2.32 0.11 0.00 0.10 4.8
S134 v AR 0.1 -0.1 -8.0 -2.43 0.11 0.00 0.07 4.3
BC06 v AR -0.2 -0.3 -8.3 -2.58 0.11 0.00 0.00 2.7

L i n e 76

503 n PT -0.1 0.3 -0.2 -1.19 4.04 0.07 1.09 13.5

805 v PT -0.0 0.2 -0.1 -1.19 4.12 0.07 0.50 8.9
805 n PT -0.0 0.2 -0.1 -1.19 4.12 0.07 0.50 8.9
3957 v PT -0.0 0.2 -0.1 -1.19 4.19 0.07 0.11 7.1
3957 n PT -0.0 0.2 -0.1 -1.09 4.80 0.08 0.11 8.0
3955 v PT -0.0 0.1 -0.1 -1.09 4.87 0.08 0.70 11.1
SE41 v PT -0.0 0.0 -0.1 -1.09 4.97 0.08 1.40 17.0
SE41 n AR -0.0 0.0 -0.1 -1.60 2.61 0.04 1.46 16.4
3951 v PT 0.0 -0.1 -0.1 -1.60 2.51 0.04 1.09 12.8
3951 n PT 0.0 -0.1 -0.1 -1.60 2.51 0.04 1.09 12.8
A065 v EM 0.0 -0.1 -0.1 -1.60 2.51 0.04 1.09 12.7
A065 n EM 0.0 -0.1 -0.1 -1.60 2.40 0.04 1.09 12.7
3949 v PT 0.0 -0.1 -0.1 -1.60 2.36 0.04 0.88 10.7
3949 n PT 0.0 -0.1 -0.1 -1.60 2.36 0.04 0.88 2.2
3947 v PT 0.0 -0.3 -0.1 -1.60 1.48 0.04 0.36 1.1
3947 n PT 0.0 -0.3 -0.1 -1.60 1.48 0.04 0.36 5.4
A064 v EM 0.0 -0.3 -0.1 -1.60 1.44 0.04 0.25 4.4
A064 n EM 0.0 -0.3 -0.1 -1.60 1.33 0.04 0.25 4.4
3945 v PT 0.0 -0.3 -0.1 -1.60 1.33 0.04 0.24 4.4
3945 n PT 0.0 -0.3 -0.1 -1.32 1.61 0.06 0.24 4.6
3943 v PT 0.0 -0.3 -0.1 -1.32 1.57 0.06 0.14 4.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 222
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

3943 n PT 0.0 -0.3 -0.1 -1.32 1.57 0.06 0.14 7.8

3941 v PT 0.0 -0.4 -0.1 -1.33 1.55 0.06 0.10 7.0
3941 n PT 0.0 -0.4 -0.1 -1.60 1.27 0.04 0.11 6.4
A063 v EM 0.0 -0.4 -0.1 -1.60 1.27 0.04 0.11 6.4
A063 n EM 0.0 -0.4 -0.1 -1.60 1.16 0.04 0.11 6.2
3939 v PT 0.1 -0.4 -0.1 -1.60 1.14 0.04 0.15 7.0
3939 n PT 0.1 -0.4 -0.1 -1.60 1.14 0.04 0.15 1.3
3937 v PT 0.1 -0.6 -0.1 -1.60 0.28 0.04 0.29 1.9
3937 n PT 0.1 -0.6 -0.1 -1.60 0.28 0.04 0.29 9.7
A062 v EM 0.1 -0.7 -0.1 -1.60 0.30 0.04 0.26 9.1
A062 n EM 0.1 -0.7 -0.1 -1.60 0.40 0.04 0.26 9.2
3935 v PT 0.1 -0.7 -0.1 -1.60 0.40 0.04 0.26 9.1
3935 n PT 0.1 -0.7 -0.1 -1.50 0.68 0.03 0.26 9.3
3933 v PT 0.0 -0.7 -0.1 -1.49 0.70 0.03 0.22 8.0
3933 n PT 0.0 -0.7 -0.1 -1.49 0.70 0.03 0.22 3.7
3931 v PT 0.0 -0.7 -0.1 -1.49 0.73 0.03 0.17 3.3
3931 n PT 0.0 -0.7 -0.1 -1.60 0.45 0.04 0.16 3.2
3927 v Elb 0.0 -0.9 -0.1 -1.60 0.56 0.04 0.05 2.6
3927 m Elb 0.0 -0.9 -0.1 -1.25 1.16 0.05 0.04 3.0
3927 n Elb 0.0 -1.0 -0.0 -0.68 1.58 0.05 0.16 3.9
SE40 v AR 0.0 -1.0 -0.0 -0.68 1.58 0.05 0.16 3.9
SE40 n AR 0.0 -1.0 -0.0 -3.27 3.24 0.05 0.16 6.2
3923 v Elb 0.0 -1.0 -0.0 -3.27 3.24 0.05 0.16 6.2
3923 m Elb -0.0 -1.0 -0.0 -4.22 1.73 0.06 0.07 4.3
3923 n Elb -0.1 -1.0 0.0 -4.51 0.14 0.06 0.14 4.0
3921 v PT -0.1 -1.0 0.0 -4.51 0.14 0.06 0.14 4.0
3919 v PT -0.1 -1.0 0.1 -4.36 0.14 0.06 0.14 3.9
3919 n PT -0.1 -1.0 0.1 -4.36 0.14 0.06 0.14 0.8
3917 v PT -0.3 -1.0 0.2 -3.48 0.14 0.06 0.14 0.7
3917 n PT -0.3 -1.0 0.2 -3.48 0.14 0.06 0.14 3.6
3915 v PT -0.5 -0.9 0.4 -3.19 0.14 0.06 0.16 3.7
3915 n PT -0.5 -0.9 0.4 -3.19 0.14 0.06 0.16 3.7
3913 v PT -0.6 -0.9 0.5 -3.09 0.14 0.06 0.17 3.7
3913 n PT -0.6 -0.9 0.5 -2.36 0.25 0.12 0.12 3.3
3911 v PT -0.6 -0.9 0.6 -2.26 0.25 0.12 0.15 3.5
3909 v Elb -1.5 -0.8 1.9 -1.03 0.25 0.12 0.75 8.5
3909 m Elb -1.5 -0.9 2.0 -0.80 0.56 0.40 0.63 14.8
3909 n Elb -1.4 -0.9 2.0 -0.18 0.87 0.47 0.45 7.5
SE39 v AR -1.0 -0.7 1.6 -0.18 0.53 0.47 0.06 5.4
SE39 n AR -1.0 -0.7 1.6 -1.14 0.25 0.47 0.06 5.1
SE38 v AR 0.6 -0.4 -0.0 -1.14 1.22 0.47 1.44 16.6
SE38 n AR 0.6 -0.4 -0.0 -0.12 3.07 0.47 1.44 17.3
3903 v Elb 0.8 -0.4 -0.5 -0.12 2.87 0.47 0.22 8.8
3903 m Elb 1.0 -0.5 -0.6 -1.99 1.95 0.43 0.28 8.2
3903 n Elb 1.2 -0.8 -0.6 -2.61 0.70 0.24 0.49 7.2
3901 v Elb 2.8 -4.2 0.6 -1.49 0.70 0.24 1.29 14.4
3901 m Elb 2.9 -4.3 0.8 -1.48 0.51 0.09 1.32 29.9
3901 n Elb 2.9 -4.3 0.8 -0.69 1.32 -0.09 1.15 12.6
SE37 v AR 2.4 -3.7 0.5 -0.69 0.84 -0.09 0.13 3.2
3897 v PT 2.0 -3.3 0.2 -0.69 0.36 -0.09 0.42 5.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 223
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

~577 -SE36 2.0 -3.3 0.2 -0.69 0.85 -0.09 0.49 5.8
SE36 v AR 1.0 -2.2 -0.0 -0.69 0.85 -0.09 0.36 4.9
SE36 n AR 1.0 -2.2 -0.0 -1.11 0.67 -0.09 0.36 4.9
SE35 v AR 0.2 -0.6 -0.0 -1.11 0.82 -0.09 0.48 6.1
SE35 n AR 0.2 -0.6 -0.0 -1.59 0.90 -0.09 0.48 6.3
SE34 v AR -0.6 1.0 -0.0 -1.59 0.62 -0.09 0.56 7.0
SE34 n AR -0.6 1.0 -0.0 -0.91 0.52 -0.09 0.56 6.7
SE33 v AR -1.7 1.8 -0.0 -0.91 1.30 -0.09 1.59 17.2
SE33 n AR -1.7 1.8 -0.0 -0.38 1.21 -0.09 1.59 16.9
3887 v Elb -3.9 3.0 -1.7 -0.38 0.50 -0.09 0.63 7.1
3887 m Elb -4.0 3.0 -1.9 -0.33 0.54 0.38 0.60 14.0
3887 n Elb -4.0 2.9 -2.1 -0.17 0.63 0.69 0.27 7.9
3885 v Elb -3.6 1.9 -2.5 -0.56 0.63 0.69 0.61 9.9
3885 m Elb -3.4 1.8 -2.5 -0.81 0.39 0.60 0.73 17.3
3885 n Elb -3.3 1.7 -2.4 -0.50 0.83 0.20 0.82 9.5
SE32 v AR -2.2 0.9 -0.0 -0.50 1.81 0.20 2.11 22.6
SE32 n AR -2.2 0.9 -0.0 -1.40 1.49 0.20 2.11 22.9
SE32 -SE31 -2.2 0.9 0.2 -1.40 1.49 0.20 2.11 22.9
SE31 v AR -0.6 0.1 -0.0 -1.40 0.02 0.20 0.25 4.2
SE31 n AR -0.6 0.1 -0.0 -1.51 0.39 0.20 0.25 4.5
SE30 v AR 1.0 0.0 -0.0 -1.51 1.07 0.20 0.86 10.3
SE30 n AR 1.0 0.0 -0.0 -0.17 0.75 0.20 0.86 9.7
3881 v Elb 1.6 0.1 -0.3 -0.17 0.26 0.20 0.34 4.7
3881 m Elb 1.6 0.1 -0.4 -0.03 0.26 0.17 0.32 7.6
3881 n Elb 1.6 0.1 -0.5 0.04 0.23 0.06 0.32 4.0
3445 v PT 1.2 -0.0 -0.8 -0.25 0.23 0.06 0.19 3.0
3445 n PT 1.2 -0.0 -0.8 -0.25 0.16 -0.00 0.21 3.1
BC02 v AR 0.2 -0.1 -1.5 -1.00 0.16 -0.00 0.00 2.3

L i n e 77

SE41 n PT -0.0 0.0 -0.1 -0.64 0.15 -0.03 0.07 3.2

4009 v PT -0.1 0.0 -0.0 -0.62 0.15 -0.03 0.06 2.8
4007 v Elb -0.5 0.1 0.4 -0.40 0.15 -0.03 0.08 3.3
4007 m Elb -0.6 0.1 0.5 -0.36 0.16 -0.02 0.08 5.0
4007 n Elb -0.6 0.0 0.5 -0.15 0.34 -0.00 0.05 2.5
4005 v PT -0.6 -0.7 0.4 -0.15 0.08 -0.00 0.16 4.9
4005 n PT -0.6 -0.7 0.4 -0.15 0.08 -0.00 0.16 0.9
4003 v PT -0.6 -0.8 0.5 -0.15 0.62 -0.00 0.07 0.6
4003 n PT -0.6 -0.8 0.5 -0.15 0.62 -0.00 0.07 3.2
A066 v EM -0.6 -0.9 0.5 -0.15 0.64 -0.00 0.06 3.0
A066 n EM -0.6 -0.9 0.5 -0.15 0.71 -0.00 0.06 3.1
4001 v PT -0.6 -0.9 0.5 -0.15 0.71 -0.00 0.06 3.1
4001 n PT -0.6 -0.9 0.5 -0.15 0.71 -0.00 0.06 3.1
3913 v PT -0.6 -0.9 0.5 -0.15 0.73 -0.00 0.11 4.2

L i n e 78

7807 n PT 0.2 -0.1 0.3 -0.32 0.02 0.00 0.05 15.2

7859 v PT 0.2 -0.1 0.2 -0.32 0.02 0.00 0.05 15.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 224
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

7859 n PT 0.2 -0.1 0.2 -0.32 0.02 0.00 0.05 15.2

7857 v PT 0.2 0.1 0.2 -0.32 0.11 0.00 0.02 12.5
7857 n PT 0.2 0.1 0.2 -0.32 0.11 0.00 0.02 2.8
7855 v PT 0.2 0.2 0.2 -0.32 0.33 0.00 0.04 2.9
7855 n PT 0.2 0.2 0.2 -0.32 0.33 0.00 0.04 15.0
9079 v EM 0.2 0.2 0.2 -0.32 0.33 0.00 0.07 18.0
9079 n EM 0.2 0.2 0.2 -0.32 0.37 0.00 0.07 18.1
7853 v PT 0.2 0.2 0.2 -0.32 0.37 0.00 0.07 18.2
7853 n PT 0.2 0.2 0.2 -0.32 0.37 0.00 0.07 18.2
7835 v PT 0.2 0.3 0.2 -0.32 0.38 0.00 0.10 23.0

L i n e 79

703 n PT 0.0 -0.0 0.1 0.00 0.05 -0.00 0.01 9.8

797 v PT 0.1 0.0 0.0 0.00 0.05 -0.00 0.00 3.0
797 n PT 0.1 0.0 0.0 0.00 0.05 0.00 0.00 0.9
799 v PT 0.1 0.0 0.0 0.00 0.00 0.00 0.00 0.9

L i n e 80

595 n PT 0.4 0.2 -0.4 0.06 0.00 -0.00 0.00 2.5

725 v PT 0.4 0.2 -0.4 0.05 0.00 0.00 0.00 2.5
727 v PT 0.5 0.2 -0.5 0.05 0.00 -0.00 0.00 2.5
727 n PT 0.5 0.2 -0.5 0.05 0.00 -0.00 0.00 0.9
729 v PT 0.6 0.2 -0.5 0.00 0.00 -0.00 0.00 0.9

L i n e 81

435 n PT -0.1 -0.2 -0.0 -0.00 0.49 0.06 0.20 12.3

505 v PT -0.1 -0.3 0.0 -0.00 0.48 0.06 0.15 9.4
505 n PT -0.1 -0.3 0.0 -0.00 0.48 0.06 0.15 9.4
507 v Elb -0.3 -0.4 0.2 -0.00 0.44 0.06 0.04 5.3
507 m Elb -0.3 -0.4 0.2 -0.25 0.35 0.07 0.05 6.2
507 n Elb -0.3 -0.4 0.2 -0.35 0.24 0.06 0.07 5.9
9283 v PT -0.3 0.1 0.0 -0.35 0.02 0.06 0.15 9.4
9283 n PT -0.3 0.1 0.0 -0.35 0.02 0.06 0.15 1.7
9279 v PT -0.2 0.6 0.1 -0.35 0.52 0.06 0.16 1.9
9279 n PT -0.2 0.6 0.1 -0.35 0.52 0.06 0.16 10.2
S143 v AR 0.0 0.9 -0.0 -0.35 0.67 0.06 0.58 32.6
S143 n AR 0.0 0.9 -0.0 0.01 0.54 0.06 0.58 32.1
515 v PT 0.1 1.0 -0.3 0.01 0.51 0.06 0.48 26.5
515 n PT 0.1 1.0 -0.3 -0.05 0.50 0.05 0.48 26.5
517 v PT 0.1 1.0 -0.3 -0.05 0.50 0.05 0.45 25.2
517 n PT 0.1 1.0 -0.3 -0.05 0.50 0.05 0.45 13.3
519 v PT 0.2 1.0 -0.4 -0.05 0.48 0.05 0.43 12.6
519 n PT 0.2 1.0 -0.4 0.01 0.49 0.06 0.43 12.6
523 v PT 0.4 1.3 -1.3 0.01 0.35 0.06 0.18 5.8
523 n PT 0.4 1.3 -1.3 0.06 0.35 0.06 0.17 5.8
525 v PT 0.4 1.3 -1.4 0.05 0.33 0.06 0.16 5.4
525 n PT 0.4 1.3 -1.4 0.05 0.33 0.06 0.16 9.8
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 225
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

527 v PT 0.4 1.3 -1.5 0.05 0.33 0.06 0.14 8.9

527 n PT 0.4 1.3 -1.5 0.01 0.33 0.06 0.14 8.9
529 v Elb 0.7 1.5 -2.4 0.01 0.26 0.06 0.02 4.2
529 m Elb 0.7 1.5 -2.6 0.02 0.24 0.06 0.03 4.1
529 n Elb 0.8 1.5 -2.8 0.02 0.23 0.03 0.04 3.6
531 v Elb 1.0 1.2 -3.6 0.02 0.16 0.03 0.06 4.4
531 m Elb 1.0 1.2 -3.7 0.02 0.14 -0.02 0.08 7.6
531 n Elb 1.1 1.2 -3.9 0.01 0.13 -0.08 0.06 5.3
533 v Elb 1.8 1.6 -5.4 0.01 0.03 -0.08 0.11 7.0
533 m Elb 1.8 1.6 -5.5 -0.01 0.04 -0.05 0.12 10.9
533 n Elb 1.7 1.5 -5.6 -0.05 0.02 0.00 0.13 7.0
539 v PT 0.7 0.5 -6.3 -0.34 0.02 0.00 0.09 5.5
539 n PT 0.7 0.5 -6.3 -0.34 0.02 0.00 0.09 1.0
541 v PT 0.6 0.4 -6.3 -0.70 0.02 0.00 0.09 1.0
543 v PT 0.5 0.3 -6.4 -0.99 0.02 0.00 0.08 1.0
543 n PT 0.5 0.3 -6.4 -0.99 0.02 0.00 0.08 5.7
A013 v EM 0.5 0.3 -6.5 -1.00 0.02 0.00 0.08 5.6
A013 n EM 0.5 0.3 -6.5 -1.04 0.02 0.00 0.08 5.7
545 v PT 0.5 0.3 -6.5 -1.04 0.02 0.00 0.08 5.7
547 v PT 0.4 0.3 -6.5 -1.06 0.02 0.00 0.08 5.6
547 n PT 0.4 0.3 -6.5 -1.32 0.02 0.00 0.03 3.5
549 v PT 0.4 0.2 -6.5 -1.34 0.02 0.00 0.03 3.4
A012 v EM 0.4 0.2 -6.5 -1.34 0.02 0.00 0.03 3.4
A012 n EM 0.4 0.2 -6.5 -1.38 0.02 0.00 0.03 3.4
555 v PT 0.4 0.2 -6.6 -1.39 0.02 0.00 0.03 3.4
555 n PT 0.4 0.2 -6.6 -1.39 0.02 0.00 0.03 0.6
557 v PT 0.3 0.2 -6.7 -1.75 0.02 0.00 0.02 0.6
557 n PT 0.3 0.2 -6.7 -1.75 0.02 0.00 0.02 3.5
S144 v AR 0.2 0.1 -6.7 -1.83 0.02 0.00 0.02 3.4
BC08 v AR -0.1 -0.0 -7.0 -1.93 0.02 0.00 0.00 2.8

L i n e 82

385 n PT -0.1 -0.1 -0.1 0.00 0.69 0.09 0.12 9.7

383 v PT -0.2 -0.1 0.0 0.00 0.68 0.09 0.04 7.4
383 n PT -0.2 -0.1 0.0 0.00 0.68 0.09 0.04 7.4
381 v Elb -0.2 -0.2 0.1 0.00 0.67 0.09 0.04 7.3
381 m Elb -0.2 -0.2 0.1 -0.26 0.60 0.11 0.04 7.9
381 n Elb -0.2 -0.2 0.1 -0.37 0.52 0.10 0.06 7.7
379 v PT -0.2 -0.2 0.1 -0.37 0.52 0.10 0.06 7.7
379 n PT -0.2 -0.2 0.1 -0.37 0.52 0.10 0.06 7.7
377 v PT -0.2 -0.1 0.1 -0.37 0.47 0.10 0.05 7.3
377 n PT -0.2 -0.1 0.1 -0.37 0.47 0.10 0.05 1.3
375 v PT -0.2 -0.1 0.0 -0.37 0.11 0.10 0.08 1.3
375 n PT -0.2 -0.1 0.0 -0.37 0.11 0.10 0.08 7.2
~075 -~078 -0.3 0.1 -0.0 -0.37 0.08 0.10 0.10 7.5
9289 v PT -0.2 0.1 -0.0 -0.37 0.13 0.10 0.08 7.0
9289 n PT -0.2 0.1 -0.0 -0.37 0.13 0.10 0.08 1.3
9285 v PT -0.0 0.4 0.1 -0.37 0.67 0.10 0.41 4.4
9285 n PT -0.0 0.4 0.1 -0.37 0.67 0.10 0.41 24.2
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 226
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

S132 v AR 0.0 0.5 -0.0 -0.37 0.76 0.10 0.64 36.1

S132 n AR 0.0 0.5 -0.0 0.03 0.59 0.10 0.64 35.6
365 v PT 0.1 0.5 -0.2 0.03 0.56 0.10 0.52 29.5
365 n PT 0.1 0.5 -0.2 -0.04 0.56 0.09 0.53 29.5
363 v PT 0.1 0.6 -0.3 -0.04 0.55 0.09 0.50 28.0
363 n PT 0.1 0.6 -0.3 -0.04 0.55 0.09 0.50 14.8
361 v PT 0.1 0.6 -0.3 -0.04 0.54 0.09 0.47 14.0
361 n PT 0.1 0.6 -0.3 0.03 0.54 0.10 0.47 14.0
357 v PT 0.4 0.7 -1.2 0.03 0.40 0.10 0.19 6.6
357 n PT 0.4 0.7 -1.2 0.08 0.40 0.10 0.19 6.6
355 v PT 0.4 0.7 -1.3 0.08 0.38 0.10 0.17 6.2
355 n PT 0.4 0.7 -1.3 0.08 0.38 0.10 0.17 11.2
353 v PT 0.4 0.7 -1.4 0.08 0.38 0.10 0.15 10.3
353 n PT 0.4 0.7 -1.4 0.03 0.38 0.10 0.15 10.3
351 v Elb 0.5 0.8 -1.7 0.03 0.35 0.10 0.08 7.5
351 m Elb 0.5 0.8 -1.9 0.04 0.34 0.03 0.10 9.0
351 n Elb 0.5 0.7 -2.1 0.03 0.33 -0.03 0.06 4.8
349 v Elb 0.6 0.5 -3.1 0.03 0.26 -0.03 0.09 5.7
349 m Elb 0.7 0.5 -3.3 0.04 0.24 -0.09 0.07 7.3
349 n Elb 0.7 0.4 -3.6 0.03 0.23 -0.11 0.04 6.5
347 v Elb 1.7 0.8 -5.9 0.03 0.04 -0.11 0.16 10.3
347 m Elb 1.7 0.7 -6.0 0.03 0.03 -0.07 0.18 16.5
347 n Elb 1.7 0.7 -6.0 0.01 0.04 0.00 0.19 10.5
341 v PT 0.7 -0.1 -6.3 -0.25 0.04 0.00 0.13 7.8
341 n PT 0.7 -0.1 -6.3 -0.25 0.04 0.00 0.13 1.4
339 v PT 0.6 -0.1 -6.4 -0.61 0.04 0.00 0.13 1.4
337 v PT 0.5 -0.1 -6.5 -0.90 0.04 0.00 0.12 1.4
337 n PT 0.5 -0.1 -6.5 -0.90 0.04 0.00 0.12 7.5
A010 v EM 0.5 -0.1 -6.5 -0.91 0.04 0.00 0.11 7.4
A010 n EM 0.5 -0.1 -6.5 -0.95 0.04 0.00 0.11 7.4
335 v PT 0.5 -0.1 -6.5 -0.95 0.04 0.00 0.11 7.4
333 v PT 0.4 -0.1 -6.5 -0.97 0.04 0.00 0.11 7.3
333 n PT 0.4 -0.1 -6.5 -1.23 0.04 -0.00 0.06 5.0
331 v PT 0.4 -0.2 -6.5 -1.25 0.04 -0.00 0.06 4.9
9483 v PT 0.4 -0.2 -6.5 -1.30 0.04 -0.00 0.06 4.8
9483 n PT 0.4 -0.2 -6.5 -1.30 0.04 -0.00 0.06 0.9
323 v PT 0.3 -0.2 -6.6 -1.66 0.04 -0.00 0.05 0.8
323 n PT 0.3 -0.2 -6.6 -1.66 0.04 -0.00 0.05 4.7
S131 v AR 0.1 -0.1 -6.7 -1.78 0.04 -0.00 0.03 3.8
BC07 v AR -0.1 -0.1 -6.8 -1.88 0.04 -0.00 0.00 2.7

L i n e 83

1121 n PT 0.4 0.1 -7.8 0.00 0.26 0.00 0.06 12.4

1133 v PT 0.3 0.1 -7.8 0.00 0.26 0.00 0.04 8.0
A030 v EM 0.3 0.1 -7.8 0.00 0.26 0.00 0.04 8.0
A030 n EM 0.3 0.1 -7.8 0.00 0.23 -0.00 0.04 7.9
1135 v PT 0.3 0.1 -7.7 0.00 0.23 -0.00 0.02 5.3
1135 n PT 0.3 0.1 -7.7 0.00 0.23 -0.00 0.02 0.8
1137 v EM 0.1 -0.0 -7.7 0.00 0.02 -0.00 0.00 0.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 227
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 84

3957 n PT -0.0 0.2 -0.1 -0.61 0.10 0.04 0.06 4.7

4017 v PT -0.2 0.2 0.0 -0.57 0.10 0.04 0.09 6.2
4021 v Elb -0.7 0.0 0.6 -0.38 0.10 0.04 0.20 11.6
4021 m Elb -0.7 -0.1 0.6 -0.33 0.19 0.02 0.20 18.2
4021 n Elb -0.7 -0.1 0.6 -0.10 0.35 -0.01 0.17 9.8
4023 v Elb 0.2 -1.0 -1.4 -0.10 0.06 -0.01 0.17 9.7
4023 m Elb 0.3 -1.1 -1.4 -0.10 0.04 0.01 0.17 15.8
4023 n Elb 0.3 -1.1 -1.4 -0.03 0.10 0.03 0.16 9.3
4025 v Elb -0.5 -0.9 -0.2 0.38 0.10 0.03 0.07 4.9
4025 m Elb -0.5 -0.9 -0.1 0.28 0.29 0.07 0.04 5.4
4025 n Elb -0.4 -0.8 -0.1 0.01 0.42 0.08 0.04 6.1
SE42 v AR -0.0 -0.0 -0.0 0.01 0.57 0.08 0.45 25.2
SE42 n AR -0.0 -0.0 -0.0 -0.04 0.46 0.08 0.45 25.1
4029 v Elb 1.7 1.9 -3.4 -0.04 0.10 0.08 0.13 8.6
4029 m Elb 1.7 1.9 -3.4 0.05 0.12 0.06 0.14 12.6
4029 n Elb 1.8 1.7 -3.4 0.13 0.05 0.00 0.14 8.0
4031 v Elb 1.0 -3.9 -2.1 0.58 0.05 0.00 0.02 2.6
4031 m Elb 0.9 -4.1 -1.9 0.40 0.44 -0.00 0.00 2.3
4031 n Elb 0.9 -4.2 -1.7 -0.02 0.61 0.00 0.05 3.8
SE43 v AR 0.5 -3.7 -0.0 -0.02 0.75 -0.00 0.58 31.9
SE43 n AR 0.5 -3.7 -0.0 -0.38 0.46 0.00 0.58 32.2
SE43 -~589 0.5 -3.7 0.6 -0.38 0.46 0.00 0.58 32.2
4035 v PT 0.0 -2.3 0.1 -0.38 0.05 0.00 0.03 2.5
SE44 v AR -0.0 -2.2 -0.0 -0.38 0.16 0.00 0.02 2.4
SE44 n AR -0.0 -2.2 -0.0 -0.49 0.21 0.00 0.02 2.5
SE44 -SE45 -0.0 -2.2 -0.3 -0.49 0.32 0.00 0.19 11.2
SE45 v AR -0.0 -0.6 -0.0 -0.49 0.32 0.00 0.19 11.2
SE45 n AR -0.0 -0.6 -0.0 -0.69 0.33 0.00 0.19 11.4
SE45 -SE47 -0.0 1.0 -0.3 -0.69 0.33 0.00 0.19 11.4
SE47 v AR -0.0 1.0 -0.0 -0.69 0.20 0.00 0.00 1.9

L i n e 85

3445 n PT 1.2 -0.0 -0.8 0.03 0.07 0.03 0.06 14.0

3443 v PT 1.1 -0.0 -0.7 0.03 0.07 0.03 0.06 12.5
3443 n PT 1.1 -0.0 -0.7 0.03 0.07 0.03 0.06 12.5
3441 v Elb 1.0 -0.0 -0.6 0.03 0.07 0.03 0.04 10.1
3441 m Elb 1.0 -0.0 -0.5 -0.03 0.08 0.02 0.04 13.6
3441 n Elb 0.9 -0.0 -0.5 -0.07 0.04 0.01 0.04 8.8
SE12 v AR 0.2 -0.6 -0.0 -0.07 0.14 0.01 0.06 12.8
SE12 n AR 0.2 -0.6 -0.0 0.02 0.19 0.01 0.06 12.8
3437 v Elb 0.2 -0.6 -0.0 0.02 0.18 0.01 0.06 11.6
3437 m Elb 0.2 -0.6 0.0 -0.11 0.14 0.00 0.04 15.0
3437 n Elb 0.2 -0.7 0.0 -0.17 0.02 0.00 0.04 8.7
3435 v Elb 0.9 -1.5 0.8 -0.03 0.02 0.00 0.01 2.7
3435 m Elb 0.9 -1.6 0.8 -0.02 0.03 0.01 0.01 3.2
3435 n Elb 0.9 -1.6 0.8 -0.00 0.03 0.01 0.01 2.7
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 228
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

3431 v Elb 1.3 -2.1 0.6 -0.00 0.06 0.01 0.02 4.8
3431 m Elb 1.4 -2.2 0.5 -0.04 0.05 -0.01 0.02 7.6
3431 n Elb 1.4 -2.1 0.5 -0.07 0.02 -0.02 0.01 5.2
3429 v PT 1.4 -2.1 0.5 -0.07 0.02 -0.02 0.01 5.2
3427 v PT 1.3 -2.0 0.5 -0.10 0.02 -0.02 0.01 5.3
3427 n PT 1.3 -2.0 0.5 -0.10 0.02 -0.02 0.01 0.8
3425 v PT 1.3 -1.8 0.4 -0.32 0.02 -0.02 0.02 0.9
3425 n PT 1.3 -1.8 0.4 -0.32 0.02 -0.02 0.02 6.1
A079 v EM 1.2 -1.8 0.3 -0.32 0.02 -0.02 0.02 6.3
A079 n EM 1.2 -1.8 0.3 -0.35 0.02 -0.02 0.02 6.4
3423 v PT 1.2 -1.8 0.3 -0.35 0.02 -0.02 0.02 6.4
3421 v PT 1.2 -1.7 0.3 -0.36 0.02 -0.02 0.02 6.6
3421 n PT 1.2 -1.7 0.3 -0.62 0.12 0.01 0.09 19.6
3447 v PT 1.2 -1.6 0.3 -0.63 0.12 0.01 0.08 18.3
A080 v EM 1.2 -1.6 0.3 -0.63 0.12 0.01 0.08 18.2
A080 n EM 1.2 -1.6 0.3 -0.66 0.12 0.01 0.08 18.3
3449 v PT 1.1 -1.6 0.2 -0.66 0.12 0.01 0.07 17.1
3449 n PT 1.1 -1.6 0.2 -0.66 0.12 0.01 0.07 2.6
3451 v PT 1.0 -1.3 0.1 -0.88 0.12 0.01 0.06 2.1
3451 n PT 1.0 -1.3 0.1 -0.88 0.12 0.01 0.06 13.9
3459 v PT 0.7 -0.9 -0.1 -0.97 0.12 0.01 0.04 11.1
3459 n PT 0.7 -0.9 -0.1 -0.97 0.12 0.01 0.04 1.7
3461 v PT 0.5 -0.7 -0.2 -1.19 0.12 0.01 0.05 2.0
3461 n PT 0.5 -0.7 -0.2 -1.19 0.12 0.01 0.05 13.5
3463 v PT 0.5 -0.6 -0.2 -1.22 0.12 0.01 0.05 14.6
3465 v Elb 0.5 -0.6 -0.2 -1.22 0.12 0.01 0.05 14.6
3465 m Elb 0.4 -0.5 -0.2 -0.92 0.82 0.00 0.03 13.9
3465 n Elb 0.4 -0.4 -0.1 -0.08 1.23 -0.01 0.04 16.4
SE46 v AR 0.5 -0.4 -0.1 -0.08 1.24 -0.01 0.08 21.7
SE46 n AR 0.5 -0.4 -0.1 -0.31 0.17 -0.01 0.08 17.4
3469 v PT 0.8 -0.1 0.5 -0.31 0.21 -0.01 0.16 34.1
3469 n PT 0.8 -0.1 0.5 -0.31 0.21 -0.01 0.16 34.2
3471 v PT 0.8 0.0 0.5 -0.31 0.21 -0.01 0.19 40.1

L i n e 86

3421 n PT 1.2 -1.7 0.3 -0.05 0.28 0.07 0.05 18.4

263 v PT 1.2 -1.7 0.2 -0.05 0.27 0.07 0.03 16.9
263 n PT 1.2 -1.7 0.2 -0.05 0.27 0.07 0.03 17.5
261 v PT 1.1 -1.8 0.1 -0.05 0.26 0.07 0.02 16.8
261 n PT 1.1 -1.8 0.1 -0.05 0.26 0.07 0.02 16.8
249 v PT 1.1 -1.8 -0.0 -0.05 0.25 0.07 0.03 17.5

L i n e 87

BC03 n AR 0.8 0.0 0.0 -0.71 0.01 0.00 0.00 5.2

SE13 v AR 0.6 0.1 -0.0 -0.71 0.22 0.00 0.03 5.2
SE13 n AR 0.6 0.1 -0.0 -1.76 3.31 0.00 0.03 6.1
3479 v Elb 0.5 0.1 -0.0 -1.76 3.21 0.00 0.44 6.8
3479 m Elb 0.4 0.1 0.0 -3.39 0.91 0.02 0.96 17.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 229
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

3479 n Elb 0.4 0.1 0.2 -2.87 1.76 0.04 0.85 8.0
3471 v PT 0.8 0.0 0.5 -2.45 1.76 0.04 0.22 5.7
3471 n PT 0.8 0.0 0.5 -2.32 1.94 0.16 0.23 6.0
3511 v Elb 1.1 -0.0 0.9 -1.93 1.94 0.16 1.28 10.1
3511 m Elb 1.2 -0.0 1.0 -2.61 0.25 0.27 1.52 25.4
3511 n Elb 1.0 -0.0 1.0 -1.92 1.61 0.26 1.33 10.4
SE14 v AR 0.1 0.1 -0.0 -1.92 0.58 0.26 0.36 6.0
SE14 n AR 0.1 0.1 -0.0 -2.14 1.53 0.26 0.36 6.3
SE14 -SE15 -3.4 1.8 -1.0 -2.14 2.72 0.26 3.33 21.9
SE15 v AR -3.4 1.8 -0.0 -2.14 2.72 0.26 3.33 21.9
SE15 n AR -3.4 1.8 -0.0 -0.66 2.92 0.26 3.33 21.5
3517 v Elb -4.4 2.5 -0.5 -0.66 1.83 0.26 0.96 8.4
3517 m Elb -4.6 2.6 -0.6 -1.53 0.96 0.89 0.87 15.7
3517 n Elb -4.6 2.7 -0.5 -1.33 1.00 1.13 0.60 9.4
3519 v Elb -4.6 2.9 -0.1 -0.88 1.00 1.13 0.48 9.1
3519 m Elb -4.5 2.9 0.1 -1.03 0.66 0.74 0.95 16.6
3519 n Elb -4.4 2.8 0.1 -0.75 0.85 0.03 1.04 8.2
SE16 v AR -2.9 1.7 -0.0 -0.75 1.02 0.03 0.76 7.0
SE16 n AR -2.9 1.7 -0.0 -1.10 1.51 0.03 0.76 7.1
SE16 -SE17 -2.9 1.7 -0.3 -1.10 1.75 0.03 1.42 10.4
SE17 v AR -0.0 -1.0 -0.0 -1.10 1.75 0.03 1.42 10.4
SE17 n AR -0.0 -1.0 -0.0 0.09 1.57 0.03 1.42 10.1
SE18 v AR 0.8 -2.8 -0.0 0.09 0.60 0.03 0.23 5.4
SE18 n AR 0.8 -2.8 -0.0 0.48 0.80 0.03 0.23 5.4
3527 v PT 0.9 -3.0 0.0 0.48 0.42 0.03 0.41 5.8
3529 v Elb 1.3 -4.2 0.4 0.48 1.19 0.03 0.54 6.2
3529 m Elb 1.3 -4.2 0.4 -0.04 1.36 -0.02 0.69 12.1
3529 n Elb 1.3 -4.3 0.3 -0.62 1.30 -0.06 0.85 7.4
SE19 v AR 1.3 -4.3 0.3 -0.62 1.30 -0.06 0.85 7.4
3533 v Elb 1.3 -4.3 0.3 -0.62 1.30 -0.06 0.85 7.4
3533 m Elb 1.3 -4.3 0.2 -1.15 1.00 -0.11 0.99 16.8
3533 n Elb 1.3 -4.3 0.2 -1.53 0.49 -0.14 1.07 8.6
3535 v Elb 0.9 -2.2 -1.3 -3.33 0.49 -0.14 2.31 15.9
3535 m Elb 0.8 -1.8 -1.3 -2.81 2.13 -0.28 2.09 34.3
3535 n Elb 0.8 -1.4 -0.8 -0.48 3.66 -0.28 1.36 11.1
3537 v Elb 0.5 -1.0 1.3 -0.48 4.17 -0.28 1.42 11.7
3537 m Elb 0.4 -0.7 1.8 -3.41 2.73 -0.23 2.30 37.8
3537 n Elb 0.4 -0.3 1.8 -4.51 0.49 -0.03 2.60 17.9
3539 v PT 0.6 0.5 1.3 -5.07 0.49 -0.03 2.23 15.9
3539 n PT 0.6 0.5 1.3 -5.07 0.49 -0.03 2.23 28.7
3541 v PT 0.6 0.6 1.2 -5.13 0.49 -0.03 2.14 28.5

L i n e 88

249 n PT 1.1 -1.8 -0.0 -0.55 0.19 0.02 0.05 13.7

251 v PT 1.1 -1.8 -0.1 -0.56 0.19 0.02 0.05 13.2
A090 v EM 1.1 -1.8 -0.1 -0.56 0.19 0.02 0.05 13.2
A090 n EM 1.1 -1.8 -0.1 -0.60 0.19 0.02 0.05 13.3
9011 v PT 1.1 -1.7 -0.1 -0.60 0.19 0.02 0.05 13.4
9011 n PT 1.1 -1.7 -0.1 -0.60 0.19 0.02 0.05 1.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 230
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

3389 v PT 1.1 -1.5 -0.2 -0.82 0.19 0.02 0.06 2.4

3389 n PT 1.1 -1.5 -0.2 -0.82 0.19 0.02 0.06 16.2
3395 v PT 1.1 -1.2 -0.4 -0.92 0.19 0.02 0.13 29.0
3395 n PT 1.1 -1.2 -0.4 -0.92 0.19 0.02 0.13 4.3
3397 v PT 1.0 -1.1 -0.5 -1.14 0.19 0.02 0.16 5.4
3397 n PT 1.0 -1.1 -0.5 -1.14 0.19 0.02 0.16 36.3
3399 v PT 0.9 -1.1 -0.5 -1.17 0.19 0.02 0.17 38.7
3401 v Elb 0.9 -1.1 -0.5 -1.17 0.19 0.02 0.17 38.7
3401 m Elb 0.9 -1.1 -0.5 -0.96 0.71 0.09 0.14 49.9
3401 n Elb 0.8 -1.1 -0.5 -0.18 1.19 0.11 0.07 33.4
SE25 v AR 0.7 -1.0 -0.1 -0.18 1.21 0.11 0.18 47.3
SE25 n AR 0.7 -1.0 -0.1 -0.54 0.92 0.11 0.18 46.4
3405 v Elb 0.6 -0.9 0.0 -0.54 0.91 0.11 0.09 33.6
3405 m Elb 0.6 -0.8 0.1 -0.68 0.80 0.05 0.11 37.4
3405 n Elb 0.7 -0.8 -0.0 -0.42 0.96 -0.00 0.07 18.3
3407 v PT 1.3 -0.5 -0.7 -0.42 0.91 -0.00 0.42 85.3
3409 v PT 1.3 -0.4 -0.7 -0.42 0.91 -0.00 0.58 117.0

L i n e 89

BC01 n AR 0.4 -0.2 -1.5 -1.93 0.56 0.00 0.00 6.6

3409 v PT 1.3 -0.4 -0.7 -0.36 0.56 0.00 0.73 7.0
3409 n PT 1.3 -0.4 -0.7 -1.10 1.24 0.32 0.61 7.0
3627 v Elb 1.7 -0.4 -0.3 -0.59 1.24 0.32 1.14 7.7
3627 m Elb 1.8 -0.4 -0.1 -0.91 0.89 0.52 1.34 14.7
3627 n Elb 1.6 -0.3 0.0 -1.00 0.74 0.58 1.40 8.3
SE27 v AR 1.0 0.0 -0.0 -1.00 1.21 0.58 1.96 9.6
SE27 n AR 1.0 0.0 -0.0 -2.54 2.65 0.58 1.96 10.2
SE27 -SE26 -2.9 3.0 -0.3 -2.54 3.49 0.58 4.40 17.3
SE26 v AR -2.9 3.0 -0.0 -2.54 3.49 0.58 4.40 17.3
SE26 n AR -2.9 3.0 -0.0 -0.90 4.71 0.58 4.40 17.2
3621 v Elb -3.6 3.6 -0.3 -0.90 3.73 0.58 1.53 9.3
3621 m Elb -3.8 3.8 -0.3 -2.75 2.29 1.66 1.19 14.6
3621 n Elb -4.0 3.9 -0.2 -2.68 1.96 2.16 0.51 10.2
3619 v Elb -4.1 4.1 0.1 -2.19 1.96 2.16 0.94 10.6
3619 m Elb -4.1 4.1 0.3 -2.56 0.90 1.58 1.78 19.4
3619 n Elb -4.0 3.9 0.4 -1.74 1.81 0.28 2.03 9.8
SE24 v AR -3.1 3.0 -0.0 -1.74 0.92 0.28 0.67 7.1
SE24 n AR -3.1 3.0 -0.0 -2.08 1.90 0.28 0.67 7.1
SE24 -SE23 -3.1 3.0 -0.3 -2.08 2.93 0.28 2.88 12.3
SE23 v AR -0.0 -0.0 -0.0 -2.08 2.93 0.28 2.88 12.3
SE23 n AR -0.0 -0.0 -0.0 -0.53 3.51 0.28 2.88 12.1
SE23 -~634 0.7 -3.3 2.1 -0.53 3.51 0.28 3.96 14.9
3611 v PT 0.7 -3.3 2.2 -0.53 1.94 0.28 2.49 10.8
SE22 v AR 0.6 -3.9 3.3 -0.53 3.11 0.28 0.27 6.9
3607 v Elb 0.5 -4.1 3.7 -0.53 3.44 0.28 1.04 7.9
3607 m Elb 0.5 -4.4 3.9 -3.01 2.28 0.29 1.93 20.4
3607 n Elb 0.6 -4.7 3.8 -4.04 0.59 0.08 2.24 10.5
3605 v PT 0.6 -4.7 3.8 -4.04 0.59 0.08 2.24 10.5
3603 v Elb 0.6 -4.7 3.8 -4.04 0.59 0.08 2.24 10.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 231
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

3603 m Elb 0.7 -4.7 3.7 -3.98 1.45 0.90 1.96 21.0
3603 n Elb 0.8 -4.7 3.7 -3.26 2.93 1.56 1.37 10.6
3601 v Elb 1.1 -4.6 3.6 -3.54 3.20 1.56 1.64 11.3
3601 m Elb 1.2 -4.6 3.6 -4.62 1.70 1.01 2.21 23.4
3601 n Elb 1.2 -4.5 3.5 -5.04 0.59 0.33 2.41 11.2
3597 v PT 0.3 -0.6 0.3 -10.21 0.59 0.33 0.82 8.3
3597 n PT 0.3 -0.6 0.3 -10.21 0.59 0.33 0.82 1.9
3595 v PT 0.1 -0.4 0.1 -12.36 0.59 0.33 0.96 1.9
3595 n PT 0.1 -0.4 0.1 -12.36 0.59 0.33 0.96 8.9
3593 v PT 0.1 -0.3 0.0 -12.70 0.59 0.33 1.01 9.0
3591 v Elb 0.1 -0.3 0.0 -12.70 0.59 0.33 1.01 9.0
3591 m Elb 0.0 -0.1 -0.0 -11.67 5.41 0.37 1.44 17.8
3591 n Elb 0.0 -0.0 -0.1 -8.82 9.57 0.34 2.58 14.9
SE21 v AR 0.0 -0.0 -0.1 -8.82 9.57 0.34 2.58 14.9
SE21 n AR 0.0 -0.0 -0.1 -0.55 3.89 0.34 2.58 11.5
3587 v Elb 0.0 -0.0 -0.1 -0.55 3.89 0.34 2.58 11.5
3587 m Elb -0.0 0.1 -0.1 -2.05 3.25 0.25 2.05 21.2
3587 n Elb -0.0 0.2 -0.1 -3.13 2.07 0.15 1.66 9.0
3583 v PT 0.1 0.7 -0.1 -3.13 1.34 0.15 0.41 6.9
3583 n PT 0.1 0.7 -0.1 -2.33 2.48 0.16 0.40 6.8
3581 v PT 0.1 0.7 -0.1 -2.37 2.39 0.16 0.17 6.7
3581 n PT 0.1 0.7 -0.1 -2.37 2.39 0.16 0.17 12.7
3579 v PT 0.1 0.8 -0.2 -2.38 2.37 0.16 0.09 11.6
3579 n PT 0.1 0.8 -0.2 -3.13 1.21 0.17 0.06 9.2
A076 v EM 0.1 0.8 -0.2 -3.13 1.21 0.17 0.06 9.2
A076 n EM 0.1 0.8 -0.2 -3.13 1.11 0.17 0.06 9.0
3577 v PT 0.1 0.8 -0.2 -3.13 1.08 0.17 0.15 10.4
3577 n PT 0.1 0.8 -0.2 -3.13 1.08 0.17 0.15 2.0
3575 v PT 0.2 1.1 -0.2 -3.13 0.35 0.17 0.40 2.9
3575 n PT 0.2 1.1 -0.2 -3.13 0.35 0.17 0.40 15.2
A077 v EM 0.2 1.1 -0.2 -3.13 0.34 0.17 0.43 15.8
A077 n EM 0.2 1.1 -0.2 -3.13 0.30 0.17 0.43 15.8
3573 v PT 0.2 1.1 -0.2 -3.13 0.30 0.17 0.43 15.8
3573 n PT 0.2 1.1 -0.2 -2.88 1.28 0.22 0.40 16.7
3571 v PT 0.2 1.2 -0.2 -2.87 1.30 0.22 0.29 14.2
3571 n PT 0.2 1.2 -0.2 -2.87 1.30 0.22 0.29 6.8
3569 v PT 0.3 1.3 -0.1 -2.83 1.39 0.22 0.20 6.7
3569 n PT 0.3 1.3 -0.1 -3.13 0.32 0.15 0.26 6.8
3567 v Elb 0.3 1.3 -0.1 -3.13 0.32 0.15 0.26 6.8
3567 m Elb 0.3 1.3 -0.1 -2.80 1.45 0.23 0.19 7.0
3567 n Elb 0.3 1.4 -0.0 -1.94 2.51 0.29 0.30 6.8
SE20 v AR 0.3 1.4 -0.0 -1.94 2.51 0.29 0.30 6.8
SE20 n AR 0.3 1.4 -0.0 -7.45 7.63 0.29 0.30 9.5
3563 v Elb 0.3 1.4 -0.0 -7.45 7.63 0.29 0.30 9.5
3563 m Elb 0.4 1.5 0.0 -9.63 4.21 0.35 0.63 10.6
3563 n Elb 0.5 1.5 0.1 -10.31 1.09 0.42 0.94 8.6
3561 v PT 0.5 1.5 0.1 -10.31 1.09 0.42 0.94 8.6
3559 v PT 0.5 1.4 0.2 -9.97 1.09 0.42 0.98 8.6
3559 n PT 0.5 1.4 0.2 -9.97 1.09 0.42 0.98 1.9
3557 v PT 0.7 1.4 0.4 -7.82 1.09 0.42 1.16 1.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 232
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

3557 n PT 0.7 1.4 0.4 -7.82 1.09 0.42 1.16 8.7

3553 v Elb 1.2 1.1 1.2 -6.41 1.09 0.42 2.17 10.9
3553 m Elb 1.2 1.0 1.4 -5.09 3.55 -0.45 1.84 20.0
3553 n Elb 1.0 0.8 1.4 -1.09 5.80 -1.07 0.45 9.9
3551 v PT 0.7 0.7 1.2 -1.09 5.41 -1.07 2.17 12.2
3551 n PT 0.7 0.7 1.2 -1.09 5.41 -1.07 2.17 28.1
3541 v PT 0.6 0.6 1.2 -1.09 5.17 -1.07 3.30 29.3
3541 n PT 0.6 0.6 1.2 -1.01 0.41 1.03 2.93 28.8
3655 v PT 0.5 0.6 1.2 -1.01 0.45 1.03 2.90 28.8
3657 v Elb -1.1 -0.3 1.4 -1.01 2.81 1.03 1.08 27.4
3657 m Elb -1.2 -0.3 1.3 -2.90 1.53 1.19 1.59 31.5
3657 n Elb -1.2 -0.3 1.1 -3.40 1.09 0.74 1.88 27.9
3659 v Elb -0.2 0.0 0.1 -5.02 1.09 0.74 0.24 27.1
3659 m Elb -0.1 0.0 0.1 -4.63 2.56 0.68 0.37 27.4
3659 n Elb -0.0 0.0 -0.0 -3.48 4.18 0.46 0.88 27.2
SE28 v AR -0.0 0.0 -0.0 -3.48 4.18 0.46 0.88 27.2
SE28 n AR -0.0 0.0 -0.0 1.02 3.87 0.46 0.88 27.2
3663 v Elb -0.0 0.0 -0.0 1.02 3.87 0.46 0.88 27.2
3663 m Elb 0.0 -0.1 -0.1 -0.59 3.83 0.13 0.89 28.3
3663 n Elb 0.1 -0.1 -0.1 -2.01 3.16 -0.22 1.10 27.3
3667 v PT 0.0 -0.3 -0.2 -2.01 2.87 -0.22 1.75 27.7
3667 n PT 0.0 -0.3 -0.2 -1.56 3.14 -0.08 1.77 27.6
3669 v PT 0.0 -0.4 -0.2 -1.57 3.05 -0.08 2.01 27.8
3669 n PT 0.0 -0.4 -0.2 -1.57 3.05 -0.08 2.01 27.6
3671 v PT 0.0 -0.4 -0.2 -1.58 2.98 -0.08 2.26 28.3
3671 n PT 0.0 -0.4 -0.2 -2.01 2.71 -0.22 2.25 28.3
A060 v EM 0.0 -0.4 -0.2 -2.01 2.71 -0.22 2.25 28.4
A060 n EM 0.0 -0.4 -0.2 -2.01 2.41 -0.22 2.25 28.4
3673 v PT -0.0 -0.5 -0.2 -2.01 2.34 -0.22 2.50 29.1
3673 n PT -0.0 -0.5 -0.2 -2.01 2.34 -0.22 2.50 6.6
3673 -3675 -0.1 -0.8 -0.2 -2.01 2.34 -0.22 2.83 6.6
3675 v PT -0.1 -0.8 -0.2 -2.01 2.28 -0.22 2.54 6.6
3675 n PT -0.1 -0.8 -0.2 -2.01 2.28 -0.22 2.54 29.2
A058 v EM -0.2 -0.9 -0.2 -2.01 2.36 -0.22 2.31 28.5
A058 n EM -0.2 -0.9 -0.2 -2.01 2.66 -0.22 2.31 28.5
3677 v PT -0.2 -0.9 -0.2 -2.01 2.66 -0.22 2.30 28.5
3677 n PT -0.2 -0.9 -0.2 -1.59 2.93 -0.37 2.28 28.4
3679 v PT -0.2 -0.9 -0.2 -1.58 2.99 -0.37 2.05 27.8
3679 n PT -0.2 -0.9 -0.2 -1.58 2.99 -0.37 2.05 27.9
3681 v PT -0.2 -1.0 -0.2 -1.57 3.08 -0.37 1.82 27.7
3681 n PT -0.2 -1.0 -0.2 -2.01 2.81 -0.22 1.84 27.7
3683 v Elb -0.2 -1.0 -0.2 -2.01 2.81 -0.22 1.84 27.7
3683 m Elb -0.3 -1.1 -0.1 -0.72 3.51 -0.60 1.37 30.1
3683 n Elb -0.4 -1.1 -0.0 0.78 3.63 -0.89 0.79 27.2
SE29 v AR -0.4 -1.1 -0.0 0.78 3.63 -0.89 0.79 27.2
SE29 n AR -0.4 -1.1 -0.0 -3.08 3.37 -0.89 0.79 27.3
3687 v Elb -0.4 -1.1 -0.0 -3.08 3.37 -0.89 0.79 27.3
3687 m Elb -0.5 -1.1 0.1 -3.97 1.92 -1.03 0.91 28.8
3687 n Elb -0.6 -1.1 0.2 -4.21 0.66 -0.98 1.11 27.5
3689 v Elb -1.9 1.6 2.2 -0.81 0.66 -0.98 2.95 28.8
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 233
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

3689 m Elb -1.8 1.8 2.3 -0.81 0.18 -1.82 2.65 37.6
3689 n Elb -1.6 1.7 2.2 -0.64 0.25 -1.62 2.75 28.8
1105 v PT -1.4 1.5 2.0 -0.64 0.16 -1.62 2.72 28.8
1105 n PT -1.4 1.5 2.0 -0.64 0.16 -1.62 2.72 11.8
1091 v PT -1.0 1.3 1.7 -0.64 0.34 -1.62 2.74 11.9
1091 n PT -1.0 1.3 1.7 -0.70 1.53 0.22 2.92 11.5
1107 v PT -0.6 1.1 1.4 -0.70 1.23 0.22 2.62 10.6
1107 n PT -0.6 1.1 1.4 -0.70 1.23 0.22 2.62 28.3
SE48 v AR -0.0 0.0 -0.0 -0.70 0.40 0.22 1.87 27.7
SE48 n AR -0.0 0.0 -0.0 -1.22 4.70 0.22 1.87 27.7
3699 v Elb 0.4 -0.7 -1.0 -1.22 4.02 0.22 1.44 27.4
3699 m Elb 0.7 -0.9 -1.3 -3.44 1.87 -0.62 2.21 34.9
3699 n Elb 1.0 -0.7 -1.3 -3.34 1.43 -1.26 2.08 28.2
3701 v Elb 2.0 1.2 -0.1 -1.30 1.43 -1.26 2.05 28.1
3701 m Elb 1.9 1.3 0.2 -1.24 1.23 -1.32 2.11 34.1
3701 n Elb 1.5 1.2 0.3 -0.76 1.40 -0.87 2.11 28.0
SE49 v AR -0.7 0.5 -0.0 -0.76 1.30 -0.87 1.90 27.8
SE49 n AR -0.7 0.5 -0.0 -1.57 4.94 -0.87 1.90 27.9
3705 v Elb -2.3 -0.0 -0.3 -1.57 4.22 -0.87 2.88 28.8
3705 m Elb -2.6 -0.3 -0.4 -2.80 3.23 -1.97 3.25 42.1
3705 n Elb -2.5 -0.6 -0.6 -2.39 3.27 -2.62 2.86 29.6
~551 -SE50 -2.5 -2.0 -1.2 -2.39 3.27 -2.62 5.13 32.9
SE50 v AR 0.2 -2.0 -0.0 -2.39 2.40 -2.62 5.13 32.9
SE50 n AR 0.2 -2.0 -0.0 -1.12 2.33 -2.62 5.13 32.7
3711 v Elb 1.6 -4.1 2.2 -1.12 3.89 -2.62 2.00 28.8
3711 m Elb 1.8 -4.7 2.3 -3.34 2.70 -2.10 3.08 41.1
3711 n Elb 1.9 -5.5 2.2 -3.92 2.33 -0.81 3.45 29.7
3713 v Elb -0.2 -14.9 -0.0 -7.64 2.33 -0.81 5.72 33.9
3713 m Elb -0.2 -15.3 -0.3 -7.20 4.09 1.73 5.40 60.2
3713 n Elb 0.0 -15.3 -0.4 -2.24 8.27 3.41 2.78 31.4
3715 v PT 0.0 -15.3 -0.4 -2.24 8.27 3.41 2.78 31.4
3715 n PT 0.0 -15.3 -0.4 -2.24 8.27 3.40 2.79 31.4
3717 v Elb 0.0 -15.3 -0.4 -2.24 8.28 3.41 2.77 31.4
3717 m Elb 0.1 -15.2 -0.4 -2.32 8.41 2.41 2.69 38.3
3717 n Elb 0.1 -15.2 -0.3 -2.05 8.63 1.53 2.19 28.4
SE51 v AR 0.1 -14.9 -0.0 -2.05 9.02 1.53 1.49 28.0
SE51 n AR 0.1 -14.9 -0.0 -3.12 5.48 1.53 1.49 27.9
N17 v ZE 0.1 -14.5 0.4 -3.12 6.46 1.53 5.71 33.5
N17 n PT 0.1 -14.5 0.4 -3.12 6.46 1.52 5.71 8.7
9419 v PT 0.1 -12.8 0.7 -3.12 7.53 1.52 12.14 16.9
9419 n PT 0.1 -12.8 0.7 7.45 3.31 -1.25 12.17 0.0
9411 v EM 0.1 -12.8 2.4 7.45 3.31 -1.25 15.13 0.0
9411 n EM 0.1 -12.8 2.4 -3.12 7.53 2.54 14.96 0.2
9413 v PT 0.0 -9.6 2.5 -3.12 156.38 2.54 157.47 2.6
9413 n PT 0.0 -9.6 2.5 -75.02 83.28 2.51 263.87 2.3
9415 v PT 0.0 -0.0 2.7 -75.02 363.52 2.51 995.31 8.4
9415 n PT 0.0 -0.0 2.7 -0.00 148.93 0.00 129.57 2.4
9417 v EM -0.0 3.2 2.7 -0.00 0.00 0.00 0.00 0.0
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 234
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

L i n e 90

9441 n PT 0.0 -2.0 0.5 -136.07 40.82 0.00 47.97 0.0

EQ08 v AR 0.0 -1.9 -0.1 -136.07 40.82 0.00 0.00 0.0

L i n e 91

9443 n PT -0.0 -0.0 0.6 -289.80 41.37 3.66 339.30 0.0

EQ07 v ST 0.0 0.0 -0.0 -289.80 41.37 3.66 290.69 0.0

L i n e 92

547 n PT 0.4 0.3 -6.5 -0.00 0.26 0.00 0.06 11.8

571 v PT 0.4 0.2 -6.5 0.00 0.26 0.00 0.04 8.1
8945 v EM 0.4 0.2 -6.5 0.00 0.26 0.00 0.04 8.0
8945 n EM 0.4 0.2 -6.5 0.00 0.23 -0.00 0.04 7.9
573 v PT 0.3 0.2 -6.5 0.00 0.23 -0.00 0.02 5.3
573 n PT 0.3 0.2 -6.5 0.00 0.23 0.00 0.02 0.8
575 v EM 0.2 0.1 -6.4 0.00 0.02 0.00 0.00 0.5

L i n e 93

333 n PT 0.4 -0.1 -6.5 -0.00 0.26 0.00 0.06 11.8

387 v EM 0.4 -0.2 -6.5 -0.00 0.26 0.00 0.04 8.0
387 n EM 0.4 -0.2 -6.5 -0.00 0.23 -0.00 0.04 7.9
8939 v PT 0.3 -0.2 -6.5 -0.00 0.23 -0.00 0.02 5.3
8939 n PT 0.3 -0.2 -6.5 0.00 0.23 0.00 0.02 0.8
391 v EM 0.2 -0.2 -6.5 0.00 0.02 0.00 0.00 0.5

L i n e 94

249 n PT 1.1 -1.8 -0.0 -0.78 0.09 0.03 0.04 12.8

247 v PT 1.1 -1.9 0.0 -0.77 0.09 0.03 0.04 11.9
A091 v EM 1.1 -1.9 0.0 -0.77 0.09 0.03 0.04 11.9
A091 n EM 1.1 -1.9 0.0 -0.73 0.09 0.03 0.04 11.8
9487 v PT 1.1 -2.0 0.0 -0.73 0.09 0.03 0.03 10.9
9487 n PT 1.1 -2.0 0.0 -0.73 0.09 0.03 0.03 1.6
239 v PT 1.1 -2.2 0.2 -0.44 0.09 0.03 0.01 1.6
239 n PT 1.1 -2.2 0.2 -0.44 0.09 0.03 0.01 8.0
235 v PT 1.1 -2.5 0.3 -0.38 0.09 0.03 0.01 7.9
235 n PT 1.1 -2.5 0.3 -0.28 0.09 0.03 0.01 7.7
A059 v Elb 1.2 -3.5 0.8 -0.19 0.09 0.03 0.08 18.0
A059 m Elb 1.2 -3.6 0.9 -0.14 0.15 0.08 0.04 19.7
A059 n Elb 1.2 -3.6 0.9 -0.01 0.19 0.08 0.02 17.7
267 v Elb 1.2 -3.5 1.0 -0.01 0.18 0.08 0.02 17.5
267 m Elb 1.1 -3.4 1.0 -0.07 0.16 0.07 0.04 18.6
267 n Elb 1.1 -3.4 1.0 -0.09 0.15 0.03 0.07 16.7
269 v Elb 2.5 -0.8 -3.0 -0.09 0.09 0.03 0.04 11.2
269 m Elb 2.5 -0.7 -3.0 -0.07 0.11 0.02 0.04 15.5
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 235
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

269 n Elb 2.4 -0.6 -2.8 -0.01 0.13 0.00 0.04 9.5
S114 v AR 0.0 0.0 -0.0 -0.01 0.23 0.00 0.19 37.9
S114 n AR 0.0 0.0 -0.0 0.01 0.20 0.00 0.19 37.9
S114 -S115 -1.2 1.8 0.3 0.01 0.20 0.00 0.19 37.9
S115 v AR -0.8 1.8 -0.0 0.01 0.13 0.00 0.05 11.0
S115 n AR -0.8 1.8 -0.0 0.07 0.12 0.00 0.05 11.1
S115 -S116 -0.8 3.7 0.4 0.07 0.20 0.00 0.18 36.9
S116 v AR 0.1 3.7 -0.0 0.07 0.20 0.00 0.18 36.9
S116 n AR 0.1 3.7 -0.0 0.27 0.46 0.00 0.18 37.7
271 v PT 0.2 3.8 -0.5 0.27 0.39 0.00 0.07 16.7
271 n PT 0.2 3.8 -0.5 0.27 0.39 0.00 0.07 2.5
273 v PT 0.3 3.9 -1.0 0.27 0.11 0.00 0.02 1.3
273 n PT 0.3 3.9 -1.0 0.27 0.11 0.00 0.02 7.1
275 v Elb 1.4 4.8 -4.2 0.27 0.08 0.00 0.02 7.7
275 m Elb 1.4 4.8 -4.3 0.19 0.21 0.02 0.02 9.4
275 n Elb 1.4 4.9 -4.3 -0.00 0.28 0.03 0.01 9.5
9429 v PT 1.3 4.9 -4.2 -0.00 0.29 0.03 0.04 12.5
9429 n PT 1.3 4.9 -4.2 -0.00 0.29 0.03 0.04 11.9
281 v PT 1.2 5.0 -4.1 -0.00 0.29 0.03 0.07 16.0

L i n e 95

235 n PT 1.1 -2.5 0.3 0.00 0.10 0.00 0.02 14.9

255 v PT 1.2 -2.5 0.3 0.00 0.10 0.00 0.00 5.4
255 n PT 1.2 -2.5 0.3 0.00 0.10 0.00 0.00 1.1
257 v PT 1.2 -2.5 0.3 0.00 0.00 0.00 0.00 1.0

L i n e 96

1091 n PT -1.0 1.3 1.7 1.78 0.24 0.10 1.85 54.5

1089 v PT -0.8 1.6 2.1 1.80 0.24 0.10 1.81 53.3
1087 v PT -0.6 2.0 2.5 1.93 0.24 0.10 1.76 52.0
1087 n PT -0.6 2.0 2.5 1.93 0.24 0.10 1.76 10.0
1085 v PT -0.3 2.5 2.9 2.48 0.24 0.10 1.71 9.7
1085 n PT -0.3 2.5 2.9 2.48 0.24 0.10 1.71 50.9
1079 v PT -0.2 2.7 3.1 2.57 0.24 0.10 1.69 50.4
1077 v Elb -0.2 2.7 3.1 2.57 0.24 0.10 1.69 50.4
1077 m Elb -0.1 3.0 3.4 1.68 2.00 0.22 1.54 81.7
1077 n Elb -0.2 3.0 4.0 -0.23 2.63 0.21 1.25 38.0
1075 v Elb -0.8 1.7 8.2 -0.23 2.84 0.21 0.76 25.6
1075 m Elb -0.9 1.2 8.7 -2.19 1.87 0.12 1.07 57.7
1075 n Elb -0.9 0.7 8.7 -2.90 0.24 -0.04 1.18 36.1
~284 -~279 -1.0 -2.6 8.7 -4.20 0.24 -0.04 1.18 36.1
1073 v Elb -0.1 -0.2 0.1 -4.20 0.24 -0.04 0.12 7.5
1073 m Elb -0.1 -0.1 -0.0 -3.87 1.69 -0.00 0.16 11.9
1073 n Elb -0.0 -0.0 -0.1 -2.95 3.04 0.02 0.29 14.0
S128 v AR -0.0 -0.0 -0.1 2.95 3.04 -0.02 0.29 14.0
S128 n AR -0.0 -0.0 -0.1 0.13 1.69 0.02 0.29 10.3
1069 v Elb -0.0 -0.0 -0.1 0.13 1.69 0.02 0.29 10.3
1069 m Elb 0.1 0.0 -0.2 -0.53 1.60 0.05 0.19 10.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 236
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1069 n Elb 0.2 0.1 -0.2 -1.10 1.26 0.06 0.10 6.7
1067 v PT 0.9 0.0 -0.3 -1.10 1.04 0.06 0.36 12.3
1067 n PT 0.9 0.0 -0.3 -1.10 1.04 0.06 0.36 2.3
1065 v PT 1.6 -0.0 -0.3 -1.10 0.17 0.06 0.59 3.4
1065 n PT 1.6 -0.0 -0.3 -1.10 0.17 0.06 0.59 17.9
1063 v Elb 2.3 -0.1 -0.2 -1.10 0.07 0.06 0.60 18.2
1063 m Elb 2.4 -0.1 -0.1 -0.99 0.49 0.04 0.58 31.2
1063 n Elb 2.5 -0.2 -0.0 -0.72 0.84 0.02 0.54 16.6
S127 v AR 2.5 -0.2 -0.0 -0.72 0.84 0.02 0.54 16.6
S127 n AR 2.5 -0.2 -0.0 1.77 1.12 -0.02 0.54 17.5
1059 v Elb 2.5 -0.2 -0.0 -1.77 1.12 0.02 0.54 17.5
1059 m Elb 2.5 -0.3 0.1 -2.05 0.35 -0.01 0.59 32.3
1059 n Elb 2.4 -0.4 0.2 -2.01 0.46 -0.04 0.58 18.5
1057 v Elb -3.7 -8.5 7.4 -0.93 0.46 -0.04 1.23 35.9
1057 m Elb -3.5 -8.8 7.5 -0.96 0.31 -0.01 1.24 65.2
1057 n Elb -3.2 -8.9 7.3 -0.46 0.86 0.02 1.16 33.8
S126 v AR 0.0 -10.0 -0.0 -0.46 0.38 0.02 0.08 4.3
S126 n AR 0.0 -10.0 -0.0 -0.22 1.08 0.02 0.08 5.2
1053 v Elb 0.4 -10.1 -1.0 -0.22 1.03 0.02 0.14 6.1
1053 m Elb 0.8 -10.3 -1.4 -0.81 0.62 0.08 0.23 13.1
1053 n Elb 1.4 -10.6 -1.4 -0.89 0.43 0.12 0.24 9.0
1051 v Elb 5.4 -12.6 0.3 -0.63 0.43 0.12 0.39 12.7
1051 m Elb 5.8 -12.7 0.6 -0.68 0.27 0.08 0.41 22.3
1051 n Elb 6.0 -12.6 0.8 -0.37 0.60 0.01 0.37 11.4
1049 v Elb 6.1 -11.2 1.5 -0.37 0.42 0.01 0.08 4.2
1049 m Elb 6.2 -11.0 1.4 -0.42 0.34 0.00 0.09 5.9
1049 n Elb 6.4 -11.0 1.0 -0.22 0.47 0.03 0.07 4.1
1047 v Elb 7.6 -11.2 -1.5 -0.22 0.39 0.03 0.24 7.9
1047 m Elb 8.0 -11.2 -1.9 -0.21 0.39 0.16 0.22 12.9
1047 n Elb 8.4 -11.3 -1.8 -0.05 0.43 0.24 0.15 8.8
1045 v Elb 11.9 -11.9 -0.0 0.23 0.43 0.24 0.41 14.0
1045 m Elb 12.3 -11.9 0.2 -0.08 0.50 0.23 0.46 24.8
1045 n Elb 12.3 -11.7 0.2 -0.37 0.37 0.11 0.54 16.3
S125 v AR 12.0 -11.0 -0.0 -0.37 0.45 0.11 0.63 18.9
S125 n AR 12.0 -11.0 -0.0 -0.62 0.81 0.11 0.63 19.3
S125 -S124 12.0 -11.0 -2.8 -0.62 0.86 0.11 0.84 25.2
S124 v AR -0.0 -0.0 -0.0 -0.62 0.86 0.11 0.84 25.2
S124 n AR -0.0 -0.0 -0.0 -0.74 1.12 0.11 0.84 25.5
1039 v Elb -4.7 2.3 0.3 -0.74 0.81 0.11 0.35 12.0
1039 m Elb -4.9 2.4 0.4 -1.00 0.38 0.00 0.42 23.0
1039 n Elb -4.5 2.4 0.7 -0.65 0.83 -0.13 0.37 12.8
1037 v Elb -1.7 1.8 1.6 -0.51 0.83 -0.13 0.35 12.1
1037 m Elb -1.0 1.9 1.5 -0.60 0.74 -0.14 0.37 20.1
1037 n Elb -0.5 2.2 0.9 -0.38 0.86 -0.14 0.33 11.7
1035 v Elb -0.1 2.9 -0.4 -0.38 0.83 -0.14 0.28 10.4
1035 m Elb -0.1 3.3 -1.1 -0.79 0.44 0.06 0.30 16.6
1035 n Elb -0.4 3.7 -1.3 -0.74 0.50 0.19 0.20 9.2
S123 v AR -6.1 6.4 -0.0 -0.74 0.38 0.19 0.38 13.1
S123 n AR -6.1 6.4 -0.0 -0.54 1.00 0.19 0.38 13.8
1031 v Elb -6.8 6.7 0.2 -0.54 0.96 0.19 0.53 17.4
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 237
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

1031 m Elb -7.0 7.0 -0.1 -0.78 0.74 0.34 0.52 28.9
1031 n Elb -6.9 7.4 -0.8 -0.56 0.89 0.35 0.48 18.2
1029 v Elb -4.3 10.6 -11.7 -0.56 0.62 0.35 0.72 23.6
1029 m Elb -4.2 10.9 -12.3 -0.78 0.27 -0.22 0.82 43.5
1029 n Elb -4.5 11.2 -12.2 -0.54 0.61 -0.69 0.50 24.0
1027 v Elb -11.0 15.8 -1.4 -0.54 0.73 -0.69 1.11 37.4
1027 m Elb -11.0 15.8 -0.7 -0.03 0.92 -1.29 0.35 36.0
1027 n Elb -10.8 15.3 -0.3 0.52 0.78 -1.19 0.61 36.2
1025 v Elb -10.6 14.5 -0.0 0.57 0.78 -1.19 0.53 35.3
1025 m Elb -10.4 13.9 0.1 0.03 0.98 -0.95 0.82 48.1
1025 n Elb -10.1 13.5 0.1 -0.56 0.83 -0.20 1.16 34.4
S122 v AR -9.7 13.1 -0.0 -0.56 0.88 -0.20 1.00 30.2
S122 n AR -9.7 13.1 -0.0 -0.72 0.39 -0.20 1.00 30.0
S122 -S121 -9.7 13.1 -0.3 -0.72 0.69 -0.20 1.00 30.0
S121 v AR -4.1 1.4 -0.0 -0.72 0.69 -0.20 0.41 14.3
S121 n AR -4.1 1.4 -0.0 -1.06 0.59 -0.20 0.41 14.4
1019 v Elb 3.6 -14.6 -0.5 -1.06 0.63 -0.20 0.97 29.4
1019 m Elb 3.8 -14.7 -0.7 -1.19 0.36 -0.74 0.69 40.9
1019 n Elb 3.7 -14.5 -0.9 -0.67 1.08 -0.86 0.46 28.0
1017 v Elb 3.2 -13.8 -1.5 -0.75 1.08 -0.86 0.15 24.9
1017 m Elb 3.1 -13.5 -1.6 -0.70 1.13 -0.58 0.58 33.9
1017 n Elb 2.9 -13.2 -1.4 -0.20 1.34 -0.06 0.73 21.8
S120 v AR 2.0 -11.6 -0.0 -0.20 1.49 -0.06 0.99 29.2
S120 n AR 2.0 -11.6 -0.0 -1.07 0.75 -0.06 0.99 29.6
S120 -S119 2.0 -11.6 0.5 -1.07 0.75 -0.06 0.99 29.6
S119 v AR -0.3 -5.3 -0.0 -1.07 0.21 -0.06 0.14 6.1
S119 n AR -0.3 -5.3 -0.0 -1.26 0.41 -0.06 0.14 6.4
9275 v PT -0.4 -2.6 -0.1 -1.26 0.10 -0.06 0.29 9.8
9275 n PT -0.4 -2.6 -0.1 -1.26 0.10 -0.06 0.29 1.9
9277 v PT -0.2 -0.5 0.1 -1.26 0.83 -0.06 0.31 2.1
9277 n PT -0.2 -0.5 0.1 -1.26 0.83 -0.06 0.31 10.9
S118 v AR 0.0 1.0 -0.0 -1.26 1.17 -0.06 1.14 33.9
S118 n AR 0.0 1.0 -0.0 -0.27 0.87 -0.06 1.14 33.0
1099 v PT 1.1 4.8 -3.9 -0.27 0.30 -0.06 0.11 5.0
1099 n PT 1.1 4.8 -3.9 -0.27 0.30 -0.06 0.11 5.0
281 v PT 1.2 5.0 -4.1 -0.27 0.27 -0.06 0.13 5.4
281 n PT 1.2 5.0 -4.1 0.00 0.16 -0.08 0.08 4.4
283 v PT 1.2 5.2 -4.3 0.00 0.13 -0.08 0.09 4.6
283 n PT 1.2 5.2 -4.3 0.00 0.13 -0.08 0.09 4.6
285 v Elb 1.5 6.0 -5.2 0.00 0.02 -0.08 0.12 5.0
285 m Elb 1.6 6.1 -5.6 -0.01 0.03 -0.06 0.13 7.7
285 n Elb 1.5 5.9 -5.8 -0.06 0.02 -0.00 0.14 5.1
289 v PT 0.8 3.5 -8.4 -0.55 0.02 -0.00 0.12 5.0
289 n PT 0.8 3.5 -8.4 -0.55 0.02 -0.00 0.12 1.0
291 v PT 0.7 3.0 -9.0 -1.36 0.02 -0.00 0.12 1.0
293 v PT 0.5 2.4 -9.7 -2.07 0.02 -0.00 0.12 1.1
293 n PT 0.5 2.4 -9.7 -2.07 0.02 -0.00 0.12 5.8
8971 v EM 0.5 2.2 -9.8 -2.10 0.02 -0.00 0.12 5.8
8971 n EM 0.5 2.2 -9.8 -2.21 0.02 -0.00 0.12 5.9
295 v PT 0.5 2.2 -9.8 -2.21 0.02 -0.00 0.12 5.9
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 238
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SECTIONAL RESULTS (section quantities) Load case Operation

Point Op WXa WYa WZa N Q MT MB SIG-V

(mm) (mm) (mm) (kN) (kN) (kNm) (kNm)(N/mm2)

297 v PT 0.5 2.1 -10.0 -2.24 0.02 -0.00 0.11 5.9

297 n PT 0.5 2.1 -10.0 -2.55 0.02 -0.00 0.03 4.4
299 v PT 0.4 1.9 -10.2 -2.58 0.02 -0.00 0.03 4.3
8969 v EM 0.4 1.9 -10.2 -2.58 0.02 -0.00 0.03 4.3
8969 n EM 0.4 1.9 -10.2 -2.69 0.02 -0.00 0.03 4.4
305 v PT 0.4 1.8 -10.4 -2.72 0.02 -0.00 0.03 4.4
305 n PT 0.4 1.8 -10.4 -2.72 0.02 -0.00 0.03 1.0
307 v PT 0.2 1.3 -11.0 -3.52 0.02 -0.00 0.02 1.1
307 n PT 0.2 1.3 -11.0 -3.52 0.02 -0.00 0.02 4.6
S117 v AR 0.2 1.1 -11.2 -3.67 0.02 -0.00 0.02 4.7
BC04 v AR -0.1 -0.0 -12.4 -3.86 0.02 -0.00 0.00 4.5

L i n e 97

9413 n PT 0.0 -9.6 2.5 -239.66 71.90 -0.00 106.41 0.0

EQ06 v AR 0.0 -9.6 -0.2 -239.66 71.90 -0.00 0.00 0.0

L i n e 98

9415 n PT 0.0 -0.0 2.7 -512.45 75.03 8.90 865.70 0.1

EQ05 v ST 0.0 -0.0 -0.0 -512.45 75.03 8.90 754.66 0.1

L i n e 99

297 n PT 0.5 2.1 -10.0 -0.00 0.30 -0.00 0.11 22.1

315 v PT 0.4 1.9 -9.9 -0.00 0.30 -0.00 0.08 16.9
317 v PT 0.2 1.5 -9.6 -0.00 0.24 0.00 0.03 6.8
317 n PT 0.2 1.5 -9.6 -0.00 0.24 0.00 0.03 1.0
319 v EM 0.1 1.1 -9.3 -0.00 0.02 0.00 0.00 0.8

ADDITIONAL RESULTS (Point loadings) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point
ZWX ZWY ZWZ(mm) ZQX ZQY ZQZ(kN)
ZPX ZPY ZPZ(deg) ZMX ZMY ZMZ(kNm)

L i n e 1

N8 n ZE
0.00 0.00 0.00 0.055 -0.018 -0.015
0.00 0.00 0.00 0.000 0.001 0.029

L i n e 2

N7 v ZE
0.00 0.00 -0.00 0.795 -0.272 2.000
0.00 0.00 0.00 0.012 0.969 0.275
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 239
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ADDITIONAL RESULTS (Point loadings) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point
ZWX ZWY ZWZ(mm) ZQX ZQY ZQZ(kN)
ZPX ZPY ZPZ(deg) ZMX ZMY ZMZ(kNm)

L i n e 5

N9 v ZE
0.00 -0.00 -0.00 1.222 -0.429 1.346
-0.00 0.00 -0.00 0.036 1.066 -0.137

L i n e 6

N10 v ZE
-0.00 0.00 0.00 0.047 0.005 -0.007
0.00 0.00 0.00 -0.003 0.001 0.009

L i n e 10

N5 v ZE
-0.01 -1.09 4.56 -0.315 0.447 0.038
-0.00 -0.00 0.00 -0.257 -0.363 0.476

L i n e 19

N1 n ZE
0.01 -3.64 -1.11 0.544 -1.005 -2.917
-0.00 0.00 -0.00 -1.780 0.930 -0.710

L i n e 22

N6 n ZE
0.05 8.51 -1.28 -0.321 -0.938 2.064
-0.01 -0.01 -0.01 0.367 -2.018 -1.172

L i n e 26

N2 n ZE
0.02 -3.68 4.51 0.700 0.143 -1.766
0.00 -0.00 0.00 0.828 -0.460 0.600
N3 n ZE
0.03 -4.04 -0.74 0.274 -2.160 -0.465
0.00 -0.00 0.00 -1.726 2.364 -1.113

L i n e 36

N12 v ZE
1.89 0.28 1.31 -0.126 0.346 -0.925
-0.05 -0.00 0.01 -0.903 0.030 0.105
N11 n ZE
-1.89 0.15 1.31 0.162 -0.082 -0.288
-0.03 -0.00 0.00 -0.622 -0.047 0.021
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 240
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

ADDITIONAL RESULTS (Point loadings) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point
ZWX ZWY ZWZ(mm) ZQX ZQY ZQZ(kN)
ZPX ZPY ZPZ(deg) ZMX ZMY ZMZ(kNm)

L i n e 51

N14 v ZE
0.00 0.00 0.00 0.022 0.391 -0.133
0.00 -0.00 -0.00 0.030 0.005 0.008

L i n e 54

N13 v ZE
0.00 0.00 0.00 0.012 0.305 -0.104
0.00 0.00 -0.00 0.021 0.031 0.009

L i n e 61

N16 n ZE
0.00 0.00 0.00 0.026 0.018 -1.165
0.00 0.00 0.00 0.006 0.028 -0.006

L i n e 66

N15 v ZE
-0.00 0.00 0.00 0.092 0.017 -1.184
-0.00 -0.00 0.00 0.004 0.095 0.044

L i n e 71

N4 v ZE
-0.00 -3.19 -0.04 0.788 0.552 -0.792
0.01 -0.00 -0.00 0.579 -0.589 -1.000

L i n e 89

N17 v ZE
0.09 -14.48 0.45 1.100 3.126 -6.361
0.03 -0.01 0.00 5.709 -1.509 0.266
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 241
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

L i n e 1

N8 ST
0.00 0.00 0.00 0.055 -0.018 -0.015
0.00 0.00 0.00 0.000 0.001 0.029
S96 AR
-1.16 -1.60 -0.02 -0.018 -0.025 -0.101
0.01 -0.02 0.09 0.000 0.000 0.000
S95 AR
-2.73 -0.36 -0.03 -0.041 -0.005 -0.138
-0.05 -0.08 0.00 0.000 0.000 0.000

L i n e 2

S97 AR
-1.04 -0.64 -0.06 -0.860 -0.532 -3.371
-0.01 -0.08 0.06 0.000 0.000 0.000
N7 ST
0.00 0.00 -0.00 0.795 -0.272 2.000
0.00 0.00 0.00 0.012 0.969 0.275

L i n e 3

S66 AR
-2.81 3.89 -0.06 -0.533 0.739 -3.037
0.00 -0.14 0.06 0.000 0.000 0.000
S65 AR
-0.01 5.65 4.82 -0.498 0.114 0.097
-0.01 -0.01 0.03 0.000 0.000 0.000
S64 HR
12.57 10.03 0.12 0.019 0.015 -1.664
0.33 -0.02 0.04 0.000 0.000 0.000
S63 AR
9.90 -2.02 -20.41 0.110 -0.838 -0.226
-0.04 -0.19 -0.26 0.000 0.000 0.000
S62 AR
-2.01 2.01 -4.86 -0.262 0.276 -0.162
-0.11 -0.04 -0.72 0.000 0.000 0.000
S61 HR
-17.32 9.44 0.22 -0.078 0.043 -3.931
0.10 -0.19 -1.02 0.000 0.000 0.000
S60 AR
-111.59 -2.00 -0.04 -0.693 -0.017 -2.294
-0.10 -0.15 -0.18 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 242
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S59 AR
-95.48 -2.00 -0.03 -0.511 -0.205 -1.498
-0.07 0.04 0.06 0.000 0.000 0.000
S58 AR
-79.39 1.08 -0.03 -0.537 0.007 -1.790
-0.04 -0.01 0.00 0.000 0.000 0.000
S57 AR
-63.29 0.65 -0.03 -0.514 0.005 -1.712
-0.01 0.00 -0.01 0.000 0.000 0.000
S55 AR
-47.20 0.00 -0.03 -0.520 0.000 -1.733
0.01 -0.00 -0.00 0.000 0.000 0.000
S54 AR
-31.11 -0.16 -0.03 -0.518 -0.003 -1.728
0.04 0.00 -0.00 0.000 0.000 0.000
S53 AR
-15.04 -0.08 -0.03 -0.518 -0.003 -1.727
0.07 0.00 0.00 0.000 0.000 0.000
S52 AR
1.03 0.00 -0.03 1.672 0.007 -1.733
0.10 0.00 0.00 0.000 0.000 0.000
S51 AR
17.13 0.05 -0.03 0.513 0.001 -1.710
0.13 -0.00 -0.00 0.000 0.000 0.000
S49 AR
33.23 0.06 -0.03 0.539 0.001 -1.797
0.15 0.01 -0.00 0.000 0.000 0.000
S48 AR
49.33 0.25 -0.03 0.402 0.002 -1.339
0.18 -0.04 0.00 0.000 0.000 0.000
S45 AR
57.39 0.59 -0.02 0.293 0.003 -0.975
0.20 0.03 0.01 0.000 0.000 0.000
S44 AR
73.50 2.00 -0.04 0.638 0.039 -2.088
0.22 0.11 0.02 0.000 0.000 0.000
S43 AR
57.11 14.31 -12.24 0.000 0.000 0.000
0.22 0.44 0.00 0.000 0.000 0.000
S42 AR
9.83 20.01 -26.26 0.036 0.339 -0.095
-0.25 0.39 -0.07 0.000 0.000 0.000
S41 HR
1.79 11.64 -20.11 0.004 0.029 -3.242
-0.50 0.27 -0.08 0.000 0.000 0.000
S40 AR
-0.57 -0.94 9.34 0.000 0.000 0.000
-0.04 0.00 0.04 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 243
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S39 AR
-2.03 -0.00 -0.07 -1.310 -0.115 -3.453
0.02 0.02 0.02 0.000 0.000 0.000
S38 AR
1.71 0.31 -0.09 1.437 0.257 -4.864
-0.00 -0.02 0.00 0.000 0.000 0.000
S37 AR
-2.00 -2.01 8.83 -0.257 -0.292 0.164
0.10 -0.10 -0.04 0.000 0.000 0.000
S36 HR
2.13 9.51 -15.56 0.007 0.030 -4.187
-0.45 0.18 -0.14 0.000 0.000 0.000
S35 AR
10.00 17.36 -21.48 0.031 0.006 -0.007
-0.24 0.33 -0.13 0.000 0.000 0.000
S29 AR
52.63 15.00 -7.43 0.023 0.078 -0.003
0.19 0.41 -0.01 0.000 0.000 0.000
S32 AR
65.07 2.00 -0.03 0.426 0.072 -1.348
0.25 0.00 0.02 0.000 0.000 0.000
S31 AR
50.84 0.35 -0.03 0.422 0.003 -1.408
0.22 0.04 0.01 0.000 0.000 0.000
S28 AR
43.72 0.07 -0.01 0.194 0.000 -0.648
0.21 -0.01 0.00 0.000 0.000 0.000
S26 AR
36.60 0.00 -0.02 0.276 0.000 -0.920
0.19 0.00 -0.00 0.000 0.000 0.000
S25 AR
29.49 0.02 -0.02 0.255 0.000 -0.850
0.18 0.00 -0.00 0.000 0.000 0.000
S24 AR
22.38 0.04 -0.02 0.260 0.000 -0.868
0.17 0.00 -0.00 0.000 0.000 0.000
S23 AR
15.27 0.05 -0.02 0.259 0.001 -0.863
0.15 0.00 -0.00 0.000 0.000 0.000
S22 AR
8.16 0.03 -0.02 0.259 0.001 -0.864
0.14 0.00 -0.00 0.000 0.000 0.000
S21 AR
1.05 0.00 -0.02 2.581 0.011 -0.864
0.13 0.00 0.00 0.000 0.000 0.000
S20 AR
-6.04 -0.03 -0.02 -0.259 -0.001 -0.864
0.12 0.00 -0.00 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 244
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S19 AR
-13.13 -0.06 -0.02 -0.259 -0.001 -0.864
0.10 0.00 -0.00 0.000 0.000 0.000
S18 AR
-20.22 -0.08 -0.02 -0.259 -0.001 -0.864
0.09 0.00 -0.00 0.000 0.000 0.000
S17 AR
-27.31 -0.10 -0.02 -0.259 -0.001 -0.864
0.08 0.00 -0.00 0.000 0.000 0.000
S16 AR
-34.41 -0.10 -0.02 -0.259 -0.001 -0.864
0.06 0.00 -0.00 0.000 0.000 0.000
S15 AR
-41.50 -0.09 -0.02 -0.259 -0.001 -0.864
0.05 0.00 -0.00 0.000 0.000 0.000
S14 AR
-48.60 -0.09 -0.02 -0.259 -0.000 -0.864
0.04 0.00 -0.00 0.000 0.000 0.000
S13 AR
-55.70 -0.11 -0.02 -0.259 -0.001 -0.864
0.02 0.00 0.00 0.000 0.000 0.000
S12 AR
-62.81 -0.24 -0.02 -0.259 -0.001 -0.864
0.01 0.00 0.00 0.000 0.000 0.000
S11 AR
-69.91 -0.55 -0.02 -0.259 -0.002 -0.864
-0.00 -0.00 0.01 0.000 0.000 0.000
S10 AR
-77.02 -1.13 -0.02 -0.259 -0.004 -0.863
-0.02 -0.00 0.01 0.000 0.000 0.000
S9 AR
-84.12 -2.00 -0.02 -0.291 -0.103 -0.867
-0.03 -0.00 0.02 0.000 0.000 0.000
S8 AR
-91.23 -2.32 -0.02 -0.255 -0.007 -0.852
-0.04 0.00 -0.02 0.000 0.000 0.000
S7 AR
-98.36 2.01 -0.02 -0.378 0.347 -0.913
-0.06 -0.00 -0.16 0.000 0.000 0.000
S6 AR
-105.50 13.34 -0.01 -0.202 0.025 -0.677
-0.07 0.01 -0.24 0.000 0.000 0.000
S5 AR
-112.64 22.94 -0.03 -0.393 0.080 -1.337
-0.08 -0.03 -0.09 0.000 0.000 0.000
S4 AR
-115.20 19.30 -0.01 -0.225 0.038 -0.760
-0.01 0.09 0.65 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 245
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S3 AR
-78.81 13.54 -0.01 -0.146 0.025 -0.494
-0.01 0.06 0.90 0.000 0.000 0.000
S2 AR
-25.79 6.07 -0.03 -0.492 0.116 -1.686
0.06 0.01 0.81 0.000 0.000 0.000
S1 AR
0.00 -0.02 -0.06 0.114 -0.793 -3.278
0.06 -0.04 0.54 0.000 0.000 0.000

L i n e 5

S91 AR
1.88 4.72 -0.07 0.423 1.066 -3.824
-0.03 0.12 -0.11 0.000 0.000 0.000
S94 AR
-1.91 0.18 -0.04 -0.690 0.065 -2.310
-0.01 0.03 -0.11 0.000 0.000 0.000
N9 ST
0.00 -0.00 -0.00 1.222 -0.429 1.346
-0.00 0.00 -0.00 0.036 1.066 -0.137

L i n e 6

S92 AR
-1.79 1.46 -0.02 -0.017 0.014 -0.074
0.00 0.00 -0.10 0.000 0.000 0.000
S93 AR
-1.36 -0.81 -0.03 -0.034 -0.020 -0.131
-0.00 -0.03 -0.01 0.000 0.000 0.000
N10 ST
-0.00 0.00 0.00 0.047 0.005 -0.007
0.00 0.00 0.00 -0.003 0.001 0.009

L i n e 10

S78 ST
0.00 0.00 0.00 -0.499 0.125 -5.043
0.00 0.00 0.00 2.571 -0.275 -0.130
S79 AR
0.77 -3.66 -0.02 0.060 -0.288 -0.981
-0.01 0.10 0.15 0.000 0.000 0.000
S80 HR
12.99 9.34 0.13 0.021 0.015 -1.603
-0.05 0.10 0.12 0.000 0.000 0.000
S82 AR
15.21 11.54 -0.02 0.244 0.185 -1.022
0.02 -0.19 -0.17 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 246
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S83 AR
0.00 1.02 -0.02 0.121 1.238 -1.265
-0.04 -0.35 -0.13 0.000 0.000 0.000
S84 AR
-2.00 -10.73 -0.05 -0.237 -0.833 -2.538
0.22 -0.44 0.06 0.000 0.000 0.000
S85 AR
-17.26 -17.50 -0.01 -0.119 -0.120 -0.564
0.12 -0.28 0.24 0.000 0.000 0.000
S86 AR
-7.78 -2.01 -0.01 -0.264 -0.495 -0.385
0.03 0.00 0.43 0.000 0.000 0.000
S87 AR
0.15 14.96 -0.01 0.002 0.184 -0.613
-0.01 0.01 0.21 0.000 0.000 0.000
S88 AR
2.01 10.80 -0.03 0.483 0.616 -1.572
0.02 0.15 0.00 0.000 0.000 0.000
S89 AR
2.01 -1.00 -0.02 0.355 -0.258 -0.884
-0.09 0.13 -0.09 0.000 0.000 0.000

L i n e 16

S90 AR
0.00 -2.00 -0.00 0.096 -1.067 -3.501
-0.13 0.07 0.08 0.000 0.000 0.000

L i n e 19

S218 AR
-2.83 0.29 -0.02 -1.080 0.110 -3.618
-0.04 0.15 0.03 0.000 0.000 0.000

L i n e 20

SE60 AR
-0.17 -4.33 -0.04 -0.050 -1.296 -4.323
-0.03 -0.02 0.00 0.000 0.000 0.000
SE59 AR
-0.01 0.00 -0.03 -0.709 0.565 -3.662
-0.09 0.02 0.02 0.000 0.000 0.000

L i n e 21

SE58 AR
-1.01 0.00 -0.01 -0.888 0.257 -0.605
-0.08 -0.07 0.05 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 247
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

SE57 AR
2.60 2.00 2.85 0.039 0.194 0.043
-0.08 -0.04 0.02 0.000 0.000 0.000
SE56 AR
0.01 0.00 -0.04 1.293 0.225 -4.729
0.07 0.05 0.02 0.000 0.000 0.000
SE55 AR
-0.41 0.32 -0.03 -0.254 0.201 -1.079
-0.10 -0.02 -0.03 0.000 0.000 0.000
SE54 AR
-2.01 -2.68 1.82 -0.168 -0.042 0.028
-0.03 -0.04 -0.01 0.000 0.000 0.000
SE53 AR
0.00 -0.01 -0.03 0.400 -0.698 -3.151
0.04 0.01 0.12 0.000 0.000 0.000
SE52 AR
-2.71 1.75 -0.00 -0.018 0.011 -0.070
-0.00 0.01 0.12 0.000 0.000 0.000

L i n e 22

S77 AR
2.65 7.58 -0.01 0.167 0.477 -5.049
0.11 -0.11 -0.12 0.000 0.000 0.000

L i n e 24

S76 AR
2.00 -0.00 7.45 0.191 -0.129 0.096
0.10 0.12 -0.22 0.000 0.000 0.000
S75 AR
7.44 4.49 -0.02 0.281 0.170 -1.096
-0.06 0.21 0.00 0.000 0.000 0.000
S74 AR
6.01 8.84 -0.02 0.200 0.293 -1.183
0.05 0.02 0.23 0.000 0.000 0.000
S73 AR
-1.01 -6.43 -0.00 -0.307 -0.135 -0.143
0.05 0.02 0.33 0.000 0.000 0.000
S72 AR
-6.78 -16.84 -0.01 -0.070 -0.173 -0.621
0.08 -0.11 0.22 0.000 0.000 0.000
S70 AR
-1.56 -9.42 -0.04 -0.114 -0.686 -2.318
0.18 -0.24 0.06 0.000 0.000 0.000
S69 AR
0.00 1.01 -0.02 0.090 0.696 -1.284
-0.05 -0.21 -0.11 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 248
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S68 AR
9.88 10.67 -0.02 0.217 0.234 -1.065
0.05 -0.14 -0.05 0.000 0.000 0.000
S67 HR
5.94 3.65 0.02 0.009 0.006 -1.513
0.08 0.07 0.22 0.000 0.000 0.000

L i n e 26

S111 AR
-2.01 -0.00 -0.03 -2.309 -0.885 -4.949
0.08 -0.03 0.14 0.000 0.000 0.000
S112 AR
1.14 -0.93 -0.04 1.829 -1.498 -7.879
0.02 -0.14 0.00 0.000 0.000 0.000

L i n e 27

S110 AR
0.01 -1.03 -0.03 0.076 -0.372 -0.376
0.21 0.20 0.03 0.000 0.000 0.000
S109 AR
-0.66 4.41 -0.06 -0.037 0.245 -0.827
-0.29 0.12 0.03 0.000 0.000 0.000
S108 AR
-1.02 1.57 -0.05 -0.125 0.192 -0.744
0.21 0.21 0.08 0.000 0.000 0.000
S107 AR
1.53 -1.12 -0.03 0.100 -0.073 -0.420
-0.01 -0.04 -0.02 0.000 0.000 0.000
SX1 ST
0.00 0.00 0.00 -0.188 -0.387 -0.483
0.00 0.00 0.00 0.154 0.071 -0.012

L i n e 32

EQ3 ST
0.00 0.00 -0.00 5.434 -46.058 -141.785
0.00 -0.00 -0.00 2.026 -1.322 -10.487

L i n e 33

EQ4 AR
-0.00 7.01 -0.14 -4.826 44.705 -144.189
-0.01 -0.00 -0.00 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 249
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

L i n e 34

SE61 AR
0.01 -0.01 -0.07 1.268 -1.118 -14.078
0.02 -0.07 -0.02 0.000 0.000 0.000
SE62 AR
1.14 4.07 -0.05 0.283 1.011 -10.497
0.01 -0.02 -0.06 0.000 0.000 0.000
SE63 AR
3.43 2.01 7.49 0.146 1.172 0.320
-0.06 -0.13 0.02 0.000 0.000 0.000
SE64 AR
-1.00 0.01 -0.00 -0.808 0.413 -0.623
-0.05 -0.18 0.05 0.000 0.000 0.000

L i n e 36

2 ST
0.00 0.00 0.00 0.036 0.264 -1.826
0.00 0.00 0.00 -1.673 0.513 0.469

L i n e 39

S98 AR
0.51 0.16 -0.70 0.000 0.000 0.000
0.05 -0.01 -0.06 0.000 0.000 0.000
SX2 ST
0.00 0.00 0.00 0.163 -0.055 -0.927
0.00 0.00 0.00 0.053 -0.002 -0.049

L i n e 40

S99 AR
1.03 2.03 -0.04 0.492 0.379 -0.580
0.06 -0.02 0.02 0.000 0.000 0.000
S100 AR
-4.12 -1.44 -0.07 -0.283 -0.099 -0.999
-0.14 0.10 0.32 0.000 0.000 0.000
S101 AR
-7.14 -16.25 -0.01 -0.024 -0.055 -0.202
-0.14 -0.08 0.49 0.000 0.000 0.000
S102 AR
-7.08 -18.00 -0.02 -0.028 -0.071 -0.254
0.08 -0.15 -0.11 0.000 0.000 0.000
S104 AR
-2.01 -14.46 -0.04 -0.101 -0.211 -0.602
0.01 -0.07 -0.10 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 250
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S105 AR
0.60 -6.70 -0.04 0.014 -0.153 -0.510
0.00 0.04 0.00 0.000 0.000 0.000
S106 AR
-0.01 1.03 -0.03 -0.079 0.457 -0.413
-0.03 0.15 0.02 0.000 0.000 0.000

L i n e 42

SE1 AR
-0.00 -0.00 -0.00 -1.614 -0.007 -5.381
0.02 0.00 -0.00 0.000 0.000 0.000
SE2 AR
-0.00 -0.00 -0.00 -1.851 -0.008 -12.372
0.02 -0.00 -0.00 0.000 0.000 0.000
SE3 AR
-0.00 0.00 -0.00 -0.247 0.002 -10.970
0.02 0.00 -0.00 0.000 0.000 0.000
SE4 AR
0.00 -0.00 -0.00 0.554 -0.013 -10.312
0.02 -0.00 -0.00 0.000 0.000 0.000
SE5 AR
0.00 0.00 -0.01 3.139 0.080 -14.143
0.02 0.00 -0.00 0.000 0.000 0.000
SE6 AR
-0.00 -0.00 -0.01 -0.002 -0.105 -22.942
-0.01 -0.00 0.00 0.000 0.000 0.000
SE7 AR
-0.00 -0.00 -0.01 -2.991 -0.182 -14.214
0.01 -0.00 -0.00 0.000 0.000 0.000
SE8 AR
0.00 0.00 -0.00 0.082 1.385 -10.423
0.01 0.00 0.00 0.000 0.000 0.000
SE9 AR
0.00 0.00 -0.00 2.770 0.328 -10.607
0.01 -0.00 -0.00 0.000 0.000 0.000
SE10 AR
0.01 -0.39 -0.00 0.095 -4.757 -15.858
0.01 0.00 -0.01 0.000 0.000 0.000
SE11 AR
0.00 0.00 0.01 0.141 3.560 -52.803
0.03 0.00 -0.02 0.000 0.000 0.000
BC99 ST
0.44 0.20 0.71 -0.000 0.000 0.000
0.03 -0.00 -0.02 -0.000 0.754 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 251
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

L i n e 44

EQ01 ST
-0.00 0.00 0.00 5.874 -26.494 -117.222
-0.00 0.00 -0.00 9.628 -2.260 -14.991

L i n e 45

EQ02 AR
-0.01 6.59 -0.09 -6.148 28.654 -89.366
-0.00 -0.00 -0.00 0.000 0.000 0.000

L i n e 51

N14 ST
0.00 0.00 0.00 0.022 0.391 -0.133
0.00 -0.00 -0.00 0.030 0.005 0.008

L i n e 52

S217 AR
0.01 -0.32 -0.04 0.014 -0.354 -1.181
0.00 0.00 -0.00 0.000 0.000 0.000

L i n e 54

S216 AR
0.06 -0.32 -0.03 0.063 -0.315 -1.069
0.00 0.03 0.00 0.000 0.000 0.000
N13 ST
0.00 0.00 0.00 0.012 0.305 -0.104
0.00 0.00 -0.00 0.021 0.031 0.009

L i n e 56

S215 AR
-0.56 -0.09 -0.01 -0.117 -0.019 -0.396
0.04 0.00 -0.02 0.000 0.000 0.000
S214 AR
-2.00 -0.68 -0.78 -0.072 -0.014 -0.016
-0.01 0.02 -0.09 0.000 0.000 0.000
S213 AR
0.00 0.00 -0.05 0.074 0.004 -1.596
-0.02 0.09 -0.12 0.000 0.000 0.000
S212 AR
10.00 0.78 -1.86 0.031 0.004 -0.009
-0.07 0.07 -0.20 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 252
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S211 AR
-0.01 0.00 -0.03 -0.189 0.080 -1.036
0.05 -0.05 -0.25 0.000 0.000 0.000
S210 AR
-14.28 -3.23 -0.02 -0.175 -0.040 -0.598
-0.04 -0.04 -0.00 0.000 0.000 0.000
S209 AR
-13.41 -2.00 -0.01 -0.113 -0.041 -0.336
-0.04 0.01 0.03 0.000 0.000 0.000
S208 AR
-12.55 -0.63 -0.02 -0.144 -0.007 -0.482
-0.04 -0.00 0.02 0.000 0.000 0.000
S207 AR
-11.68 -0.02 -0.01 -0.133 -0.000 -0.443
-0.04 0.00 0.01 0.000 0.000 0.000
S206 AR
-10.81 0.10 -0.01 -0.136 0.001 -0.454
-0.04 -0.00 -0.00 0.000 0.000 0.000
S205 AR
-9.95 0.05 -0.01 -0.135 0.001 -0.451
-0.04 -0.00 -0.00 0.000 0.000 0.000
S204 AR
-9.08 -0.01 -0.01 -0.135 -0.000 -0.452
-0.04 -0.00 -0.00 0.000 0.000 0.000
S203 AR
-8.22 -0.03 -0.01 -0.135 -0.001 -0.451
-0.04 -0.00 -0.00 0.000 0.000 0.000
S202 AR
-7.36 -0.04 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 0.00 0.000 0.000 0.000
S201 AR
-6.50 -0.03 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 0.00 0.000 0.000 0.000
S200 AR
-5.64 -0.02 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 0.00 0.000 0.000 0.000
S199 AR
-4.78 -0.02 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 0.00 0.000 0.000 0.000
S198 AR
-3.93 -0.02 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 -0.00 0.000 0.000 0.000
S197 AR
-3.07 -0.01 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 -0.00 0.000 0.000 0.000
S196 AR
-2.22 -0.01 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 -0.00 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 253
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S195 AR
-1.37 -0.01 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 0.00 0.000 0.000 0.000
S194 AR
-0.52 -0.00 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 0.00 0.000 0.000 0.000
S193 AR
0.33 0.00 -0.01 0.135 0.001 -0.451
-0.02 -0.00 -0.00 0.000 0.000 0.000
S192 AR
1.18 0.00 -0.01 0.135 0.000 -0.451
-0.02 -0.00 -0.00 0.000 0.000 0.000
S191 AR
2.04 0.00 -0.01 1.145 0.005 -0.452
-0.02 -0.00 -0.00 0.000 0.000 0.000
S190 AR
2.90 0.01 -0.01 0.135 0.000 -0.450
-0.02 -0.00 0.00 0.000 0.000 0.000
S189 AR
3.76 0.01 -0.01 0.137 0.001 -0.457
-0.02 0.00 0.00 0.000 0.000 0.000
S188 AR
4.63 0.04 -0.01 0.128 0.001 -0.428
-0.02 -0.00 0.00 0.000 0.000 0.000
S187 AR
5.50 0.08 -0.02 0.160 0.002 -0.535
-0.02 0.01 0.00 0.000 0.000 0.000
S186 AR
6.36 0.08 -0.00 0.039 0.001 -0.130
-0.02 -0.03 -0.00 0.000 0.000 0.000
S185 AR
7.23 -0.14 -0.05 0.430 -0.008 -1.435
-0.02 0.12 -0.01 0.000 0.000 0.000
S184 AR
0.00 -0.01 -0.03 0.051 -0.174 -0.906
0.06 -0.07 -0.00 0.000 0.000 0.000
S183 AR
-0.07 0.98 -0.02 -0.015 0.200 -0.669
-0.07 -0.04 0.01 0.000 0.000 0.000
S182 AR
-0.05 0.09 -5.89 0.000 0.000 0.000
-0.01 -0.01 0.01 0.000 0.000 0.000
BC05 AR
0.03 -0.07 -6.09 0.007 -0.018 -1.674
-0.01 -0.01 0.01 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 254
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

L i n e 61

N16 ST
0.00 0.00 0.00 0.026 0.018 -1.165
0.00 0.00 0.00 0.006 0.028 -0.006

L i n e 64

S179 HR
-0.05 -0.32 0.31 -0.000 -0.000 -0.427
0.01 0.00 -0.01 0.000 0.000 0.000
S178 AR
-0.72 -0.14 -0.01 -0.130 -0.026 -0.442
0.04 0.01 -0.02 0.000 0.000 0.000
S177 AR
-2.00 -0.72 -0.79 -0.055 -0.011 -0.012
-0.01 0.02 -0.09 0.000 0.000 0.000
S176 AR
0.00 0.00 -0.05 0.083 0.003 -1.576
-0.02 0.09 -0.12 0.000 0.000 0.000
S175 AR
9.70 0.78 -0.91 0.000 0.000 0.000
-0.05 0.08 -0.20 0.000 0.000 0.000
S174 AR
-0.01 0.00 -0.03 -0.161 0.089 -1.026
0.07 -0.04 -0.24 0.000 0.000 0.000
S173 AR
-14.36 -3.76 -0.02 -0.204 -0.053 -0.701
-0.05 -0.05 0.02 0.000 0.000 0.000
S172 AR
-13.49 -2.00 -0.01 -0.108 -0.037 -0.324
-0.04 0.01 0.04 0.000 0.000 0.000
S171 AR
-12.62 -0.52 -0.02 -0.145 -0.006 -0.485
-0.04 -0.00 0.02 0.000 0.000 0.000
S170 AR
-11.75 0.06 -0.01 -0.133 0.001 -0.443
-0.04 0.00 0.00 0.000 0.000 0.000
S169 AR
-10.88 0.13 -0.01 -0.136 0.002 -0.454
-0.03 -0.00 -0.00 0.000 0.000 0.000
S166 AR
-10.00 0.05 -0.01 -0.135 0.001 -0.451
-0.03 -0.00 -0.00 0.000 0.000 0.000
S163 AR
-9.13 -0.01 -0.01 -0.135 -0.000 -0.452
-0.03 -0.00 -0.00 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 255
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S162 AR
-8.27 -0.04 -0.01 -0.135 -0.001 -0.451
-0.03 -0.00 -0.00 0.000 0.000 0.000
S160 AR
-7.40 -0.04 -0.01 -0.135 -0.001 -0.451
-0.02 -0.00 0.00 0.000 0.000 0.000
S159 AR
-6.53 -0.03 -0.01 -0.135 -0.001 -0.451
-0.02 -0.00 0.00 0.000 0.000 0.000
S158 AR
-5.67 -0.02 -0.01 -0.135 -0.001 -0.451
-0.02 -0.00 0.00 0.000 0.000 0.000
S157 AR
-4.81 -0.02 -0.01 -0.135 -0.001 -0.451
-0.01 -0.00 0.00 0.000 0.000 0.000
S156 AR
-3.95 -0.02 -0.01 -0.135 -0.001 -0.451
-0.01 -0.00 -0.00 0.000 0.000 0.000
S155 AR
-3.09 -0.01 -0.01 -0.135 -0.001 -0.451
-0.01 -0.00 -0.00 0.000 0.000 0.000
S154 AR
-2.23 -0.01 -0.01 -0.135 -0.001 -0.451
-0.00 -0.00 -0.00 0.000 0.000 0.000
S153 AR
-1.37 -0.01 -0.01 -0.135 -0.001 -0.451
-0.00 -0.00 -0.00 0.000 0.000 0.000
S152 AR
-0.52 -0.00 -0.01 -0.135 -0.001 -0.451
0.00 0.00 0.00 0.000 0.000 0.000
S151 AR
0.34 0.00 -0.01 0.135 0.001 -0.452
0.01 0.00 0.00 0.000 0.000 0.000
S150 AR
1.19 0.00 -0.01 0.135 0.001 -0.451
0.01 0.00 -0.00 0.000 0.000 0.000
S149 AR
2.05 0.00 -0.01 1.563 0.006 -0.453
0.01 0.00 -0.00 0.000 0.000 0.000
S148 AR
2.92 -0.00 -0.01 0.134 -0.000 -0.447
0.01 -0.00 0.00 0.000 0.000 0.000
S147 AR
3.80 0.07 -0.01 0.141 0.003 -0.470
0.02 0.00 0.00 0.000 0.000 0.000
S146 AR
4.67 0.32 -0.01 0.113 0.008 -0.378
0.02 -0.01 0.01 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 256
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S145 AR
5.54 0.58 -0.03 0.249 0.026 -0.834
0.02 0.03 0.00 0.000 0.000 0.000
S168 AR
-0.53 0.06 -0.03 -0.305 0.033 -1.024
0.01 0.03 -0.01 0.000 0.000 0.000
S167 AR
-0.00 -0.00 -0.02 -0.047 -0.105 -0.577
0.02 -0.01 -0.01 0.000 0.000 0.000
S165 AR
-0.00 0.00 -0.04 -0.073 0.076 -1.189
0.03 0.04 0.02 0.000 0.000 0.000

L i n e 66

S180 HR
0.64 -0.40 0.31 0.000 -0.000 -0.278
0.01 -0.00 0.01 0.000 0.000 0.000
N15 ST
-0.00 0.00 0.00 0.092 0.017 -1.184
-0.00 -0.00 0.00 0.004 0.095 0.044

L i n e 70

S138 AR
-1.23 1.43 -0.01 -0.330 0.383 -1.686
0.10 0.01 -0.01 0.000 0.000 0.000
S139 AR
-0.32 0.66 -0.02 -0.234 0.477 -1.771
0.06 0.21 0.03 0.000 0.000 0.000
S140 AR
-0.00 -0.01 -0.02 -0.133 -0.728 -2.730
0.07 0.17 0.08 0.000 0.000 0.000
S141 AR
0.00 -0.00 -0.02 0.046 -0.285 -2.512
0.08 0.10 0.02 0.000 0.000 0.000
S142 HR
0.34 0.90 0.00 0.002 0.005 -2.050
0.02 -0.00 0.05 0.000 0.000 0.000

L i n e 71

S181 AR
-0.18 1.01 -0.03 -0.260 1.468 -4.969
0.00 -0.03 -0.01 0.000 0.000 0.000
SE65 AR
-1.86 -0.34 -0.02 -1.077 -0.199 -3.652
0.02 0.04 -0.00 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 257
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

SE66 AR
1.04 -1.47 -0.02 0.698 -0.986 -4.026
0.02 -0.05 -0.07 0.000 0.000 0.000

L i n e 72

SE67 AR
0.05 -0.30 -0.04 0.065 -0.414 -1.396
-0.01 0.01 -0.00 0.000 0.000 0.000
SE68 AR
0.00 0.02 -0.07 0.024 0.672 -2.341
-0.01 0.01 0.00 0.000 0.000 0.000
SE69 AR
0.40 -0.67 1.57 0.000 0.000 0.000
-0.01 -0.00 0.01 0.000 0.000 0.000
SE70 AR
0.00 0.00 -0.02 0.072 0.037 -0.591
-0.07 -0.00 0.01 0.000 0.000 0.000
BC15 AR
-0.79 0.12 -0.01 -0.070 0.011 -0.236
-0.07 0.04 0.03 0.000 0.000 0.000

L i n e 74

S164 AR
0.51 0.08 -0.02 0.230 0.036 -0.777
-0.00 -0.04 -0.02 0.000 0.000 0.000

L i n e 75

S137 AR
0.01 0.00 -0.02 0.661 0.047 -2.565
0.06 -0.00 -0.03 0.000 0.000 0.000
S136 AR
1.49 -1.15 -0.02 0.550 -0.424 -2.315
-0.00 0.01 0.01 0.000 0.000 0.000
S135 AR
-0.00 -0.32 -0.02 -0.003 -0.725 -2.414
-0.00 0.03 0.01 0.000 0.000 0.000
S133 AR
-0.06 1.07 -0.04 -0.032 0.600 -2.003
-0.04 0.07 -0.01 0.000 0.000 0.000
S134 AR
0.11 -0.10 -8.05 0.000 0.000 0.000
-0.02 0.03 -0.05 0.000 0.000 0.000
BC06 AR
-0.18 -0.30 -8.33 -0.057 -0.093 -2.581
-0.02 0.02 -0.05 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 258
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

L i n e 76

SE41 AR
-0.01 0.01 -0.07 -0.674 0.649 -8.190
-0.00 -0.03 0.00 0.000 0.000 0.000
SE40 AR
0.01 -0.96 -0.05 0.009 -1.570 -5.235
-0.00 -0.03 0.00 0.000 0.000 0.000
SE39 AR
-1.01 -0.73 1.61 -0.950 -0.118 0.259
0.03 0.03 0.01 0.000 0.000 0.000
SE38 AR
0.58 -0.42 -0.04 1.020 -0.746 -4.212
0.08 0.05 0.00 0.000 0.000 0.000
SE37 AR
2.43 -3.75 0.52 0.000 0.000 0.000
-0.02 0.03 0.03 0.000 0.000 0.000
SE36 AR
0.98 -2.16 -0.01 0.186 -0.412 -1.506
-0.00 0.02 0.02 0.000 0.000 0.000
SE35 AR
0.17 -0.57 -0.01 0.148 -0.485 -1.689
-0.00 0.01 0.01 0.000 0.000 0.000
SE34 AR
-0.63 1.01 -0.00 -0.223 0.684 -0.059
0.01 0.00 0.03 0.000 0.000 0.000
SE33 AR
-1.73 1.85 -0.02 -0.493 0.527 -2.406
-0.02 -0.00 0.05 0.000 0.000 0.000
SE32 AR
-2.17 0.90 -0.03 -0.905 0.374 -3.264
-0.06 -0.04 -0.02 0.000 0.000 0.000
SE31 AR
-0.58 0.10 -0.00 -0.110 0.019 -0.370
-0.04 0.01 -0.01 0.000 0.000 0.000
SE30 AR
1.01 0.00 -0.02 1.345 0.138 -1.809
-0.02 0.01 0.00 0.000 0.000 0.000
BC02 AR
0.20 -0.12 -1.51 0.135 -0.082 -0.997
-0.00 0.04 0.01 0.000 0.000 0.000

L i n e 81

S143 AR
0.04 0.88 -0.04 0.015 0.362 -1.207
-0.05 0.07 -0.02 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 259
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S144 AR
0.19 0.12 -6.75 0.000 0.000 0.000
-0.01 0.02 -0.04 0.000 0.000 0.000
BC08 AR
-0.07 -0.05 -7.02 -0.021 -0.013 -1.932
-0.01 0.02 -0.04 0.000 0.000 0.000

L i n e 82

S132 AR
0.04 0.49 -0.04 0.031 0.403 -1.349
-0.04 0.08 -0.02 0.000 0.000 0.000
S131 AR
0.12 -0.15 -6.68 0.000 0.000 0.000
0.00 0.02 -0.05 0.000 0.000 0.000
BC07 AR
-0.10 -0.11 -6.84 -0.029 -0.029 -1.880
0.00 0.02 -0.05 0.000 0.000 0.000

L i n e 84

SE42 AR
-0.00 -0.00 -0.03 -0.050 -0.125 -1.020
0.02 0.02 0.05 0.000 0.000 0.000
SE43 AR
0.55 -3.74 -0.04 0.052 -0.359 -1.209
0.09 -0.03 0.02 0.000 0.000 0.000
SE44 AR
-0.02 -2.15 -0.01 -0.001 -0.109 -0.363
-0.02 -0.03 0.00 0.000 0.000 0.000
SE45 AR
-0.02 -0.56 -0.02 -0.006 -0.195 -0.650
-0.00 -0.03 -0.00 0.000 0.000 0.000
SE47 AR
-0.00 1.02 -0.01 -0.002 0.685 -0.200
0.02 -0.03 -0.00 0.000 0.000 0.000

L i n e 85

SE12 AR
0.22 -0.59 -0.02 0.033 -0.091 -0.322
-0.01 0.03 -0.04 0.000 0.000 0.000
SE46 AR
0.45 -0.42 -0.08 0.260 -0.238 -1.174
0.08 0.05 -0.03 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 260
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

L i n e 87

BC03 AR
0.78 0.01 0.00 0.706 0.008 0.003
0.01 -0.00 -0.01 0.000 0.000 0.000
SE13 AR
0.61 0.05 -0.02 1.053 0.092 -3.524
0.01 -0.00 -0.01 0.000 0.000 0.000
SE14 AR
0.13 0.13 -0.01 0.213 0.209 -0.994
-0.00 -0.04 -0.01 0.000 0.000 0.000
SE15 AR
-3.43 1.77 -0.03 -1.477 0.761 -5.538
-0.03 -0.00 -0.03 0.000 0.000 0.000
SE16 AR
-2.92 1.71 -0.01 -0.590 0.346 -2.281
0.01 0.02 0.05 0.000 0.000 0.000
SE17 AR
-0.00 -1.01 -0.02 -0.262 -1.189 -3.308
-0.00 0.02 0.02 0.000 0.000 0.000
SE18 AR
0.81 -2.79 -0.01 0.115 -0.393 -1.364
-0.00 0.01 0.01 0.000 0.000 0.000
SE19 AR
1.30 -4.29 0.32 0.000 0.000 0.000
0.01 0.01 0.01 0.000 0.000 0.000

L i n e 88

SE25 AR
0.71 -0.96 -0.14 0.360 -0.488 -2.022
-0.04 0.08 -0.03 0.000 0.000 0.000

L i n e 89

BC01 AR
0.36 -0.25 -1.52 0.463 -0.313 -1.928
0.01 0.04 -0.02 0.000 0.000 0.000
SE27 AR
1.01 0.00 -0.01 1.541 0.793 -3.609
-0.00 -0.01 -0.02 0.000 0.000 0.000
SE26 AR
-2.93 2.99 -0.03 -1.654 1.686 -7.872
-0.03 -0.01 -0.04 0.000 0.000 0.000
SE24 AR
-3.09 2.99 -0.01 -0.352 0.340 -1.632
0.01 0.00 0.04 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 261
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

SE23 AR
-0.00 -0.01 -0.02 -0.813 -1.559 -6.385
-0.00 -0.01 0.03 0.000 0.000 0.000
SE22 AR
0.59 -3.94 3.29 0.000 0.000 0.000
-0.07 -0.02 -0.01 0.000 0.000 0.000
SE21 AR
0.00 -0.01 -0.05 0.592 -3.658 -15.358
0.03 0.02 -0.01 0.000 0.000 0.000
SE20 AR
0.34 1.42 -0.04 0.769 3.211 -11.007
0.00 0.03 -0.00 0.000 0.000 0.000
SE28 AR
-0.00 0.01 -0.03 -0.917 2.413 -8.787
0.01 -0.03 0.00 0.000 0.000 0.000
SE29 AR
-0.38 -1.12 -0.03 -0.731 -2.171 -7.635
-0.02 -0.03 -0.03 0.000 0.000 0.000
SE48 AR
-0.00 0.00 -0.02 -0.522 1.140 -4.547
-0.08 0.08 -0.06 0.000 0.000 0.000
SE49 AR
-0.71 0.49 -0.02 -1.179 0.812 -4.771
0.02 0.03 -0.11 0.000 0.000 0.000
SE50 AR
0.24 -2.01 -0.00 1.292 -3.614 -0.688
-0.09 -0.05 -0.04 0.000 0.000 0.000
SE51 AR
0.12 -14.93 -0.01 0.008 -1.074 -3.581
0.04 -0.01 0.00 0.000 0.000 0.000

L i n e 90

EQ08 AR
0.01 -1.91 -0.14 0.205 -40.820 -136.069
0.00 -0.00 0.00 0.000 0.000 0.000

L i n e 91

EQ07 ST
0.00 0.00 -0.00 0.583 41.372 -289.801
-0.00 -0.00 0.00 290.689 0.966 3.666

L i n e 94

S114 AR
0.01 0.00 -0.03 0.108 0.021 -0.412
0.07 0.04 0.09 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 262
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

S115 AR
-0.80 1.84 -0.02 -0.029 0.066 -0.241
0.00 0.04 -0.02 0.000 0.000 0.000
S116 AR
0.12 3.65 -0.04 0.006 0.196 -0.652
-0.08 0.05 -0.02 0.000 0.000 0.000

L i n e 96

S128 AR
-0.02 -0.00 -0.11 -1.162 -0.190 -5.519
0.09 -0.00 -0.01 0.000 0.000 0.000
S127 AR
2.46 -0.20 -0.04 0.638 -0.052 -2.133
0.11 -0.06 -0.01 0.000 0.000 0.000
S126 AR
0.00 -10.01 -0.01 0.243 -0.363 -0.632
0.13 0.27 -0.04 0.000 0.000 0.000
S125 AR
12.04 -11.02 -0.02 0.266 -0.243 -1.200
-0.05 0.21 0.05 0.000 0.000 0.000
S124 AR
-0.01 -0.00 -0.04 -0.419 -0.121 -1.910
0.04 0.29 0.20 0.000 0.000 0.000
S123 AR
-6.09 6.36 -0.02 -0.188 0.196 -0.904
0.06 0.44 0.21 0.000 0.000 0.000
S122 AR
-9.71 13.10 -0.02 -0.163 0.220 -0.911
0.31 0.03 -0.13 0.000 0.000 0.000
S121 AR
-4.14 1.41 -0.02 -0.333 0.114 -1.174
0.23 0.00 -0.27 0.000 0.000 0.000
S120 AR
2.02 -11.63 -0.03 1.074 -0.862 -1.798
0.07 0.11 0.07 0.000 0.000 0.000
S119 AR
-0.29 -5.26 -0.01 -0.010 -0.186 -0.622
-0.01 0.08 0.01 0.000 0.000 0.000
S118 AR
0.00 1.02 -0.04 0.015 0.991 -2.041
-0.04 0.06 -0.02 0.000 0.000 0.000
S117 AR
0.20 1.07 -11.18 0.000 0.000 0.000
-0.09 0.02 -0.04 0.000 0.000 0.000
BC04 AR
-0.07 -0.01 -12.44 -0.022 -0.002 -3.857
-0.09 0.02 -0.04 0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 263
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

SUPPORT LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
WX WY WZ(mm) AQX AQY AQZ(kN)
PX PY PZ(deg) AMX AMY AMZ(kNm)

L i n e 97

EQ06 AR
0.04 -9.56 -0.24 0.316 -71.896 -239.656
0.00 -0.00 0.00 0.000 0.000 0.000

L i n e 98

EQ05 ST
0.00 -0.00 -0.00 0.785 75.023 -512.446
-0.00 0.00 -0.00 754.657 2.168 8.902

FRICTION HANGER LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
HDWX HDWY HDWZ(mm) HRI HL(m) HDW(mm)
HPX HPY HPZ(deg) CW(N/mm) HQ(kN)

L i n e 3

S64 HR
12.57 10.03 0.12 +Z 1.099 0.000
0.52 -0.66 0.04 stiff 1.664
S61 HR
-17.32 9.44 0.22 +Z 0.872 0.000
0.62 1.14 -1.02 stiff 3.932
S41 HR
1.79 11.64 -20.11 +Z 1.300 20.164
0.51 -0.08 -0.08 16.6 3.242
S36 HR
2.13 9.51 -15.56 +Z 1.300 15.597
0.41 -0.09 -0.14 33.3 4.187

L i n e 10

S80 HR
12.99 9.34 0.13 +Z 1.000 0.000
0.54 -0.74 0.12 stiff 1.603

L i n e 24

S67 HR
5.94 3.65 0.02 +Z 1.000 0.000
0.21 -0.34 0.22 stiff 1.513
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 264
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

FRICTION HANGER LOADS L o a d c. Operation

in special CS if specified, otherwise in absolute coordinate system

Point Op
HDWX HDWY HDWZ(mm) HRI HL(m) HDW(mm)
HPX HPY HPZ(deg) CW(N/mm) HQ(kN)

L i n e 64

S179 HR
-0.05 -0.32 0.31 +Z 0.600 -0.309
-0.03 0.00 -0.01 4.1 0.427

L i n e 66

S180 HR
0.64 -0.40 0.31 +Z 0.600 -0.311
-0.04 -0.06 0.01 4.1 0.278

L i n e 70

S142 HR
0.34 0.90 0.00 +Z 0.365 0.000
0.14 -0.05 0.05 stiff 2.050

SUM OF SUPPORT LOADS (kN) L o a d c. Operation

sum AQX sum AQY sum AQZ

-0.000 -0.000 -2278.855

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 1

$000 TF CS 1733 1735 $000

0.00 0.00 0.00 -0.048 0.004 0.099
0.00 0.00 0.00 0.018 -0.008 0.017

L i n e 3

$001 TF CS 1667 1435 $001

0.00 0.00 0.00 0.037 0.264 -0.978
0.00 0.00 0.00 -1.193 0.459 -0.467
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 265
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 4

$002 TF CS 1735 1733 $002

0.00 0.00 0.00 0.000 0.108 0.000
0.00 0.00 0.00 -0.000 0.000 0.000

L i n e 5

$003 TF CS 1229 1187 $003

0.00 0.00 0.00 -0.955 -1.109 -0.697
0.00 0.00 0.00 -0.922 0.761 1.266

L i n e 6

$004 TF CS S91 1171 $004

0.00 0.00 0.00 -0.001 -0.004 0.140
0.00 0.00 0.00 0.040 -0.014 -0.005

L i n e 7

$005 TF CS 9255 1311 $005

0.00 0.00 0.00 -0.000 0.108 0.000
0.00 0.00 0.00 -0.000 0.000 -0.000

L i n e 8

$006 TF CS 1171 1169 $006

0.00 0.00 0.00 -0.000 0.108 -0.000
0.00 0.00 0.00 0.000 0.000 -0.000

L i n e 9

$007 TF CS ~303 1709 $007

0.00 0.00 0.00 -0.000 -0.057 -0.000
0.00 0.00 0.00 -0.000 0.000 -0.000

L i n e 10

$008 TF CS 1299 1301 $008

0.00 0.00 0.00 -0.157 -0.251 -0.050
0.00 0.00 0.00 0.055 0.092 -0.273
$009 TF CS 9125 9129 $009
0.00 0.00 0.00 -0.448 0.313 0.313
0.00 0.00 0.00 0.486 -0.476 0.437
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 266
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 11

$010 TF CS ~726 1447 $010

0.00 0.00 0.00 0.000 0.157 -0.000
0.00 0.00 0.00 0.000 0.000 0.000

L i n e 12

$011 TF CS 1327 1329 $011

0.00 0.00 0.00 -0.000 0.108 0.000
0.00 0.00 0.00 0.000 0.000 0.000

L i n e 13

$012 TF CS ~287 1145 $012

0.00 0.00 0.00 -0.000 -0.057 -0.000
0.00 0.00 0.00 0.000 0.000 -0.000

L i n e 14

$013 TF CS 1733 1731 $013

0.00 0.00 0.00 -0.031 -0.065 -0.002
0.00 0.00 0.00 -0.001 0.001 0.006
$014 TF CS ~306 1725 $014
0.00 0.00 0.00 -0.031 0.066 -0.002
0.00 0.00 0.00 -0.001 -0.001 0.006

L i n e 15

$015 TF CS 1529 1531 $015

0.00 0.00 0.00 -0.000 -0.207 -0.001
0.00 0.00 0.00 -0.000 -0.000 0.000

L i n e 19

$016 TF CS 9129 9125 $016

0.00 0.00 0.00 1.008 3.465 0.539
0.00 0.00 0.00 -0.722 0.710 -2.178
$017 TF CS C941 C943 $017
0.00 0.00 0.00 -0.893 0.540 4.078
0.00 0.00 0.00 1.599 1.741 0.228

L i n e 20

$018 TF CS B927 B929 $018

0.00 0.00 0.00 0.147 0.406 0.727
0.00 0.00 0.00 0.287 -1.087 0.063
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 267
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 22

$019 TF CS 9998 9137 $019

0.00 0.00 0.00 -0.937 -1.713 0.324
0.00 0.00 0.00 -1.890 1.172 0.015

L i n e 23

$020 TF CS 1643 1641 $020

0.00 0.00 0.00 -0.000 0.166 -0.000
0.00 0.00 0.00 -0.025 -0.000 0.000

L i n e 24

$021 TF CS 1339 1341 $021

0.00 0.00 0.00 1.136 0.187 0.343
0.00 0.00 0.00 0.096 0.141 -1.481

L i n e 25

$022 TF CS 1169 1167 $022

0.00 0.00 0.00 -0.025 -0.065 0.004
0.00 0.00 0.00 0.002 -0.001 0.004
$023 TF CS ~290 1161 $023
0.00 0.00 0.00 -0.025 0.065 0.004
0.00 0.00 0.00 0.002 0.001 0.004

L i n e 26

$024 TF CS 9125 9131 $024

0.00 0.00 0.00 -0.143 -2.314 -0.700
0.00 0.00 0.00 0.181 0.600 -0.771
$025 TF CS 9996 9111 $025
0.00 0.00 0.00 2.161 -0.044 0.266
0.00 0.00 0.00 -2.296 1.113 -2.330

L i n e 27

$026 TF CS ~488 205 $026

0.00 0.00 0.00 0.055 -0.382 -0.080
0.00 0.00 0.00 0.125 0.004 0.046

L i n e 30

$027 TF CS ~053 95 $027

0.00 0.00 0.00 -0.000 0.056 -0.000
0.00 0.00 0.00 -0.000 0.000 0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 268
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 31

$028 TF CS 9111 9123 $028

0.00 0.00 0.00 -0.000 -0.509 -0.000
0.00 0.00 0.00 -0.000 -0.000 0.000

L i n e 35

$029 TF CS C949 C951 $029

0.00 0.00 0.00 -2.294 -2.350 0.246
0.00 0.00 0.00 0.200 0.272 1.698
$030 TF CS C969 C971 $030
0.00 0.00 0.00 0.743 -0.256 2.293
0.00 0.00 0.00 0.552 -1.106 -0.980

L i n e 38

$031 TF CS 8995 1685 $031

0.00 0.00 0.00 -0.370 0.000 -0.000
0.00 0.00 0.00 -0.000 0.000 0.107

L i n e 39

$032 TF CS 103 101 $032

0.00 0.00 0.00 0.240 -0.734 -0.141
0.00 0.00 0.00 0.001 -0.110 -0.143

L i n e 40

$033 TF CS 135 73 $033

0.00 0.00 0.00 -0.420 -0.078 -0.223
0.00 0.00 0.00 -0.068 0.003 0.124

L i n e 41

$034 TF CS ~045 145 $034

0.00 0.00 0.00 -0.000 0.056 0.000
0.00 0.00 0.00 0.000 0.000 0.000

L i n e 43

$035 TF CS SX1 69 $035

0.00 0.00 0.00 0.000 0.057 0.000
0.00 0.00 0.00 0.000 0.000 -0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 269
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 46

$036 TF CS 1671 1673 $036

0.00 0.00 0.00 0.370 0.000 0.000
0.00 0.00 0.00 0.000 0.000 -0.107

L i n e 47

$037 TF CS 41 39 $037
0.00 0.00 0.00 0.001 -0.281 -0.026
0.00 0.00 0.00 -0.086 -0.028 -0.019

L i n e 48

$038 TF CS SX2 163 $038

0.00 0.00 0.00 0.000 0.057 0.000
0.00 0.00 0.00 0.000 0.000 -0.000

L i n e 49

$039 TF CS 35 33 $039
0.00 0.00 0.00 0.012 -0.529 0.334
0.00 0.00 0.00 0.132 -0.079 -0.048

L i n e 50

$040 TF CS 909 907 $040

0.00 0.00 0.00 0.000 0.000 -0.098
0.00 0.00 0.00 -0.007 0.000 0.000

L i n e 52

$041 TF CS 857 855 $041

0.00 0.00 0.00 -0.036 0.337 -0.036
0.00 0.00 0.00 -0.046 0.019 0.042

L i n e 53

$042 TF CS 909 911 $042

0.00 0.00 0.00 0.000 -0.051 0.000
0.00 0.00 0.00 0.000 0.000 0.000

L i n e 55

$043 TF CS 875 877 $043

0.00 0.00 0.00 0.000 -0.051 -0.000
0.00 0.00 0.00 -0.000 0.000 -0.000
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 270
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 57

$044 TF CS 871 873 $044

0.00 0.00 0.00 -0.000 -0.000 0.098
0.00 0.00 0.00 0.007 -0.000 0.000

L i n e 58

$045 TF CS 911 913 $045

0.00 0.00 0.00 0.000 0.003 -0.000
0.00 0.00 0.00 0.000 0.000 0.000

L i n e 59

$046 TF CS 979 977 $046

0.00 0.00 0.00 0.259 0.000 -0.000
0.00 0.00 0.00 -0.000 0.000 -0.046

L i n e 60

$047 TF CS 877 879 $047

0.00 0.00 0.00 0.000 0.003 -0.000
0.00 0.00 0.00 0.000 0.000 0.000

L i n e 61

$048 TF CS 677 679 $048

0.00 0.00 0.00 0.026 0.018 0.080
0.00 0.00 0.00 0.023 0.001 -0.032

L i n e 62

$049 TF CS 771 769 $049

0.00 0.00 0.00 -0.051 0.000 0.000
0.00 0.00 0.00 0.000 -0.000 0.006

L i n e 63

$050 TF CS ~143 763 $050

0.00 0.00 0.00 -0.053 0.000 0.000
0.00 0.00 0.00 0.000 0.000 0.007

L i n e 65

$051 TF CS ~189 649 $051

0.00 0.00 0.00 0.051 0.000 0.000
0.00 0.00 0.00 -0.000 -0.000 -0.006
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 271
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 67

$052 TF CS ~141 697 $052

0.00 0.00 0.00 0.053 0.000 0.000
0.00 0.00 0.00 0.000 -0.000 -0.007

L i n e 68

$053 TF CS ~176 S165 $053

0.00 0.00 0.00 -0.218 -0.075 -0.002
0.00 0.00 0.00 -0.002 -0.001 0.061
$054 TF CS ~181 S164 $054
0.00 0.00 0.00 0.218 0.081 0.002
0.00 0.00 0.00 0.002 -0.004 -0.061

L i n e 69

$055 TF CS 453 451 $055

0.00 0.00 0.00 -0.221 0.718 -0.075
0.00 0.00 0.00 0.230 0.083 0.031

L i n e 70

$056 TF CS 803 503 $056

0.00 0.00 0.00 -0.052 2.725 -0.247
0.00 0.00 0.00 0.350 -0.112 0.245

L i n e 72

$057 TF CS SE65 7819 $057

0.00 0.00 0.00 -0.092 0.155 -0.305
0.00 0.00 0.00 -0.014 -0.115 0.003

L i n e 73

$058 TF CS ~178 613 $058

0.00 0.00 0.00 -0.000 0.056 -0.000
0.00 0.00 0.00 -0.000 0.000 0.000

L i n e 77

$059 TF CS 3955 SE41 $059

0.00 0.00 0.00 -0.146 -0.635 0.046
0.00 0.00 0.00 0.043 -0.026 0.045
$060 TF CS 3915 3913 $060
0.00 0.00 0.00 0.729 0.146 0.046
0.00 0.00 0.00 0.058 0.004 -0.036
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 272
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 78

$061 TF CS 7809 7807 $061

0.00 0.00 0.00 -0.001 -0.318 -0.020
0.00 0.00 0.00 -0.021 0.003 0.041
$062 TF CS 7833 7835 $062
0.00 0.00 0.00 0.378 0.318 -0.020
0.00 0.00 0.00 0.000 -0.003 -0.080

L i n e 79

$063 TF CS ~136 703 $063

0.00 0.00 0.00 0.051 0.000 0.000
0.00 0.00 0.00 0.000 -0.000 -0.006

L i n e 80

$064 TF CS 597 595 $064

0.00 0.00 0.00 -0.000 0.056 -0.000
0.00 0.00 0.00 -0.000 0.000 0.000

L i n e 81

$065 TF CS 437 435 $065

0.00 0.00 0.00 -0.349 -0.005 -0.338
0.00 0.00 0.00 -0.103 0.062 0.130

L i n e 82

$066 TF CS 433 385 $066

0.00 0.00 0.00 -0.374 0.004 -0.578
0.00 0.00 0.00 -0.045 0.090 0.047

L i n e 83

$067 TF CS 1123 1121 $067

0.00 0.00 0.00 0.259 0.000 -0.000
0.00 0.00 0.00 0.000 0.000 -0.046

L i n e 84

$068 TF CS 805 3957 $068

0.00 0.00 0.00 -0.102 -0.613 -0.006
0.00 0.00 0.00 -0.014 0.038 -0.066
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 273
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 85

$069 TF CS ~558 3445 $069

0.00 0.00 0.00 0.006 0.033 0.069
0.00 0.00 0.00 0.058 0.027 -0.002
$070 TF CS ~637 3471 $070
0.00 0.00 0.00 0.129 0.314 0.164
0.00 0.00 0.00 0.095 0.013 -0.144

L i n e 86

$071 TF CS 3423 3421 $071

0.00 0.00 0.00 0.260 -0.053 -0.094
0.00 0.00 0.00 -0.028 0.074 -0.028
$072 TF CS 251 249 $072
0.00 0.00 0.00 -0.235 0.053 -0.094
0.00 0.00 0.00 0.007 -0.074 0.027

L i n e 87

$073 TF CS 3551 3541 $073

0.00 0.00 0.00 0.078 5.128 -0.480
0.00 0.00 0.00 2.166 0.031 -0.372

L i n e 88

$074 TF CS ~635 3409 $074

0.00 0.00 0.00 -0.735 0.423 0.538
0.00 0.00 0.00 0.247 0.000 0.382

L i n e 92

$075 TF CS 545 547 $075

0.00 0.00 0.00 0.260 0.000 0.000
0.00 0.00 0.00 -0.000 0.000 -0.046

L i n e 93

$076 TF CS 335 333 $076

0.00 0.00 0.00 0.260 -0.000 -0.000
0.00 0.00 0.00 0.000 0.000 -0.046

L i n e 94

$077 TF CS 1099 281 $077

0.00 0.00 0.00 0.269 0.005 -0.104
0.00 0.00 0.00 -0.019 -0.027 -0.050
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 274
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

DEFORMATION BREAKS (int spr a flex coup) L o a d c. Operation

in special CS if specified, otherwise in absolute Coordinate System

Point Op
DWX DWY DWZ(mm) QX QY QZ(kN)
DPX DPY DPZ(deg) MX MY MZ(kNm)

L i n e 95

$078 TF CS ~709 235 $078

0.00 0.00 0.00 -0.104 0.000 0.000
0.00 0.00 0.00 0.000 0.000 0.013

L i n e 96

$079 TF CS 1105 1091 $079

0.00 0.00 0.00 0.063 1.778 -0.231
0.00 0.00 0.00 -1.816 0.102 0.166

L i n e 99

$080 TF CS 295 297 $080

0.00 0.00 0.00 0.301 0.000 -0.000
0.00 0.00 0.00 0.000 -0.000 -0.092

MAXIMUM STRESSES IN PIPES (N/mm2) Load case Operation

SIGMA PKT

Axial stress due to int press. 16.1 C941 beh. PT

Tang. stress due to int press. 32.2 C941 beh. PT
S(M+P) = MI/Z + P*D/4/S 117.7 3409 bef. PT

Axial stress due to axial force -3.9 S21 beh. AR

Axial stress due to bending -115.4 3409 bef. PT
Shear stress due to torsion 32.8 43 beh. Elb

Resultant longitudinal stress -116.6 3409 bef. PT

Equivalent stress accord.to ASA 115.4 3409 bef. PT
Equiv str acc to GE.HYP(=SIG-V) 117.0 3409 bef. PT
 Bertha-von-Suttner-Allee 19, D 59423 Unna Stress Calculations
Phone: +49 (0)2303 332 33-0 with the CAE-System
Fax: +49 (0)2303 332 33-50
Software & Engineering Email [email protected] - Internet www.rohr2.de ROHR2
R E S U L T S -- Program ROHR2 /34.1 -- Page 275
Commiss. HCU U376 Date 20.12.24 09:34:09
K371-Rijeka RUP-U376
367-CN-001

MAXIMUM STRESSES IN SECTIONS (N/mm2) Load case Operation

Maximum <-------accessory---------------->
stress Point Line SIG-N TAU-Q TAU-MT SIG-MY SIG-MZ

Compression : -SIG-N -0.0 n 9415 98 -0.0 0.0 0.0 -0.0 -0.1

Compr.+bend : -SIG-X -0.1 n 9415 98 -0.0 0.0 0.0 -0.0 -0.1
Tension+bend :+SIG-X 0.0 n 9443 91 -0.0 0.0 0.0 0.0 0.0
Shear : TAU 0.0 n 9996 44 -0.0 0.0 -0.0 0.0 0.0
Equ. stress : SIG-V 0.1 n 9415 98 -0.0 0.0 0.0 -0.0 -0.1

EXTREME DISPLACEMENTS (mm) L O A D C A S E Operation

min values max values max space disp: line 3

W(mm) Pt A(m) W(mm) Pt A(m) W(mm) Pt A(m)
WX -118.919 ~366 0.000 76.631 1285 0.000 -118.919 1419 0.000
WY -21.843 45 0.000 25.896 ~337 0.669 19.636 1419 0.000
WZ -28.595 1291 0.000 12.778 1429 0.000 -1.491 1419 0.000

WWWWW 1 Warning(s) WWWWW