Datasheet

Multifunctional Humidity & Temperature Transmitter

HYGROPHIL®-K 4326-31

Temperature Range -40 ... +180°C

Very easy mounting, fast and easy service

and replacement

On – site – calibration

Chemical resistance against Cl2 and SO2

and other mediums

Best accuracy over whole temperature

range

Optional pressure tight from 0,01 to 15bar

Application Function
HYGROPHIL®-K 4326-31 is a combi- The capacitive humidity sensor is • Measured and calculated
nation of a high quality capacitive produced in modern thin film technol- values:
humidity-sensor and the newest mi- ogy. Due to careful selection of mate- RH, TT, DT, HT, VP, MH, …
croprocessor technology. These are rials, to state-of-the-art production
the guarantee for best accuracy, ex- technology and a long experience in • Optional with display
cellent long-term stability, small hys- thin film technology, all humidity sen-
teresis and high resistance to pollut- sors show an excellent long-term • Two free scalable and config-
ants. The HYGROPHIL®-K 4326-31 stability, highest reproducibility of the urable analog outputs and se-
offers easy installation and on-site sensor characteristics, are wetable rial interface RS 232 or optional
adjustment. These features guarantee and very resistant to pollution. RS485
a simple service and a high availabil- The capacitive humidity sensor is in
ity even in harsh industrial applica- fact a plate capacitor. A polymer layer • For hard mechanical and
tions. is placed between a metal electrode chemical stress with a high
The actual measured or calculate and a coated glass substrate. The resistance sensor which can
data can be indicated on the optional dielectric permittivity ε of the polymer be displaced 20m from the
integrated display. depends on its water content, that transmitter
The user friendly software tool (MS means it depends on relative humidity
WINDOWSTM) is a great help for easy RH. • Two free configurable relay
data analysis and logging in graphical For an optimal humidity exchange outputs
or spreadsheet format on a PC as between the polymer layer and the
well as for data and alarm manage- surrounding air, the metal electrode is • Two point calibration
ment and configuration. a porous layer of 0.1 - 1µm. The ab-
Some of typical applications are: sence of additional isolation layers • MIN / MAX - function
leads to a high sensitivity.
¾ Chemical industry
¾ High end HVAC
¾ Drying processes
¾ Oven processes
¾ Pharmaceutical industry
¾ Meteorology
¾ Green houses

BARTEC GmbH ∗ Bereich Messtechnik und Sensorik ∗ Schulstrasse 30 ∗ 94239 Gotteszell ∗ Germany
Phone +49(0)9929 301-0 ∗ Fax +49(0)9929 301-112 ∗ E-mail: [email protected] www.bartec.de/messtechnik
Technical Data
Measured quantities
Relative humidity
Humidity sensor standard or coating (for aggressive mediums)
Working range 0...100 % RH (confirm to the working range of the humidity
sensor, see enclosed diagram)
Accuracy incl. hysteresis and nonlinearity with:
- special calibration against certified standards ± 1 % RH (0...90 % RH) ± 2 % RH (90...100 % RH)
- standard calibration ± 2 % RH (0...90 % RH) ± 3 % RH (90...100 % RH)
Guaranteed accuracy limits - GAL 23 for range 0-90 % RH 2,35 % RH
according to standard NFX15.113 for range 0-100 % RH 2,96 % RH
Temperature dependence electronics typical ± 0,01 % RH/°C
Temperature dependence sensing probe typical ± (0,002+0,002 x RH[%] x ∆T [°C] ∆T = T – 20°C
Response time t90 ( metal grid filter ) < 15s
Temperature
Temperature sensor element Pt 1000 (class A, DIN EN 60751)
Working range sensing head -40...180 °C (optional °F)
Temperature dependence of electronics typical 0,005 °C/°C
Accuracy (typical)

0,6

0,4
Tolerance [°C]

0,2

0
-40 -20 0 20 40 60 80 100 120 140 160 180
-0,2

-0,4

-0,6

Temperature [°C]

Outputs
2 free scalable and configurable analog outputs 0-5V -1 mA < IL < 1 mA
0 - 10 V -1 mA < IL < 1 mA
0 - 20 mA RL < 350 Ohm
4 - 20 mA RL < 350 Ohm
Serial interfaces RS232
RS485 optional
Values and ranges
Relative humidity RH 0 ... 100 %
Temperature TT -40 ... 180 °C
Dew point DT -80 ... 100 °C ( Frost point FP -80 ... 0 °C )
Humid temperature HT 0 ... 100 °C
Water vapor pressure VP 0 ... 1100 mbar
Mixed humidity MH 0 ... 1000 g/kg
Absolute Humidity DV 0 ... 700 g/m3
Specific enthalpy h 0 ... 2800 kJ/kg

Datenblatt HYGROPHI®-K 4326-31 06.2003 - Subject to change – including of a technical kind -

General
supply voltage SELV 8 ... 48 V DC
SELV 12 ... 35 V AC
Current consumption
2x Voltage output for 24 V DC/AC : typical 40 mA
2x Current output typical 80 mA
Housing / protection class PC / IP65
Pressure range for pressure tight probe 0,01 … 15 bar (option)
System requirements for software WINDOWS 98 or later, serial interface
Cable gland2) M16x1,5
Electrical connection2) screw terminals max. 1,5 mm²
Display graphical LCD display ( 128x32 pixels ) with integrated push-buttons
for selecting parameters and MIN / MAX function
Sensor protection sintered stainless steel filter, PTFE or metal grid filter
Switching variables free to choose
Alarm outputs 2 x 1 switch contact
250 V AC / 6 A
28 V DC / 6 A
Switch point and hysteresis can be adjusted with configuration software
Working temperature range of electronics -40...+60 °C
Working temperature range with display -30...+60 °C
Storage temperature range -30...+60 °C
CE compatibility according EN61000-6-2
EN50081-1 EN61010-1
Humidity Sensor – Working Range

100
90
Relative humidity [ % ]

80
70
60
50
40
30
20
10
0
-40 -20 0 20 40 60 80 100 120 140 160 180
Temperature [ °C ]

The working range of the humidity sensor element is shown in terms of humidity / temperature limits.

Although the sensor would not deteriorate beyond the limits, their performance can only be specified within the
limits of the working range.

High Humidity Calibration

For applications with a steady climate of > 90%RH we recommend a special high humidity calibration.

Datenblatt HYGROPHI®-K 4326-31 06.2003 - Subject to change – including of a technical kind -

Dimensions
Sensor diameter : 12mm
filter length : 32mm
sensor length : 50 / 200 / 400mm
Transmitter 135 x 90 x 66,5 mm
Ordering Guide
HYGROPHIL K 4326-23 SNR: 631 x 723 x x x x x x x x
consisting of sensor and transmitter

Model standard .......1

coated .......2
Display NO ......................0
YES ......................1
Filter stainless steel ............................1
PTFE ............................2
metal grid ............................3
Connector screwed cable gland ................. .................0
1 plug for power supply and outputs ..... ..................1
2 plugs for power/outputs and RS232 .…..................2
2 plugs with power/outputs and RS485 ....................3
Calibration standard ........................................1
high humidity ........................................2
Interfaces RS232 ...............................................0
RS485 ...............................................1
Output 0 ... 5V .....................................................1
0 ... 10V .....................................................2
0 ... 20mA .....................................................3
4 ... 20mA .....................................................4
Cable length 2m ..........................................................2
5m ..........................................................5
10m ..........................................................0
Sensor length 50mm ................................................................0
200mm ................................................................1
200mm pressure tight with screw thread .............................................2
400mm ................................................................3
400mm pressure tight with screw thread .............................................4

Spare parts and accessories

Order-no.:
Mounting flange ( stainless steel ) 215743
Power supply 230 VAC for mounting rail, type 5906-7, 24V/300mA 216614
Power supply 230 VAC for wall mounting, type 5906-4, 24V/25mA U8901159064
Visualisation software on request
Interface cable on request

Calibration unit horizontal 216301

Calibration unit vertical 215742
Humidity standard 5% RH (box with 5 units) 217363
Humidity standard 10% RH (box with 5 units) 217264
Humidity standard 35% RH (box with 5 units) 215744
Humidity standard 50% RH (box with 5 units) on request
Humidity standard 80% RH (box with 5 units) 216608
Humidity standard 95% RH (box with 5 units) on request

Standard stainless steel filter 217344

PTFE filter clean air application 217345
Metal grid filter for application with high humidity 217346

Test certificate confirm to DIN EN 10204-2.3 ISO 9001 on request

Datenblatt HYGROPHI®-K 4326-31 06.2003 - Subject to change – including of a technical kind -