Page 1

SUPPLYING FITTING AND FIXING NEW SERVICE AND DELIVERY LINE CONNECTION FROM PUMP TO OVERHEAD RESERVOIRS FOR
KITCHEN AND REPLACING P.V.C WAER STORAGE TANK AT ROOF OF NURSE'S QUARTER INCLUDING ALIED WORKS OF DR. B.N.BOSE
HOSPITAL UNDER BARRACKPORE DIVISION, P.W.D DURING THE YEAR 2022-23 (S&P WORKS).
N.I.T. NO. 21 /BKPSD-II OF 2022-23.(Sl.No.1)
SCHEDULE OF WORKS
Sl. Description of work No.or Unit Estimated Rate AMOUNT
No. Qty. Figure Words Rs. P

1 Supplying, fitting and fixing PVC pipes for underground work of

approved make of Schedule 80 (medium duty) conforming to ASTMD -
1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with
all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo,
nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted
including cost of all materials ,jointing materials, cutting pipes, making
Rupees Two
threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil 48.00 mtr 207.00 Hundred & Seven 9936.00
and refilling the same as directed complete in all respect. (Payment will be Only
made on the centre line measurement of the total pipe line including all
specials No separate payment will be made for accessories, specials.)
PVC Pipes
40mm dia

25mm dia
Rupees One
42.00 mtr 121.00 Hundred & 5082.00
Twenty One Only

50mm dia
Rupees Two
24.00 mtr 282.00 Hundred & Eighty 6768.00
Two Only

2 Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes

& fittings conforming to IS-15778: 2007
(V) Female threaded adopter
Rupees Six
(Brass threaded)
4 each 612.00 Hundred & 2448.00
40mm dia Twelve Only

25mm dia Rupees Two

4 each 292.00 Hundred & Ninety 1168.00
Two Only
50mm dia
Rupees Nine
4 each 947.00 Hundred & Fourty 3788.00
Seven Only

(U) Male threaded adopter Rupees Five

(Brass threaded) 4 each 585.00 Hundred & Eighty 2340.00
40mm dia Five Only
25mm dia Rupees Two
4 each 251.00 Hundred & Fifty 1004.00
One Only
50mm dia
Rupees One
4 each 1093.00 Thousand & 4372.00
Ninety Three Only

3 Cutting out pipe and making threads. Rupees Twenty

12 each 25.00 300.00
(iii) Above 32 mm upto 50 mm dia. Five Only
4 Supplying, fitting and fixing bib cock or stop cock. Rupees One
(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 2 each 154.00 Hundred & Fifty 308.00
15 mm Four Only
5 Supply & labour of G.I. nipple standard 50 mm long. Rupees Ninety
4 each 92.00 368.00
(v) 40 mm Two Only
25mm
4 each 50.00 Rupees Fifty Only 200.00

50mm Rupees One

Hundred &
6 each 127.00 762.00
Twenty Seven
Only
 Page 2

6 Supply & labour of G.I. short piece of TATA make (Above 50mm &
upto150 mm long) Rupees One
8 each 112.00 Hundred & 896.00
(v) 40 mm
Twelve Only

25mm Rupees Eighty

4 each 83.00 332.00
Three Only
50mm Rupees One
6 each 136.00 Hundred & Thirty 816.00
Six Only
7 Supply & labour of G.I. plain equal elbow of approved brand and make. Rupees Ninety
8 each 99.00 792.00
(v) 40 mm Nine Only
25mm Rupees Fifty One
4 each 51.00 204.00
Only
50mm
Rupees One
6 each 149.00 Hundred & Fourty 894.00
Nine Only

8 Supply & labour of galvanised iron socket with I.S.I. mark.

iv) 50mm Rupees One
14 each 102.00 Hundred & Two 1428.00
Only

iii) 25mm
Rupees Thirty
4 each 39.00 156.00
Nine Only

9 Supply & labour of long screw (150 mm long) of TATA make with Rupees One
sockets (TATA make) and jamnut. 4 each 108.00 Hundred & Eight 432.00
(v) 40 mm Only
25mm Rupees Sixty Six
4 each 66.00 264.00
Only
50mm Rupees One
6 each 150.00 Hundred & Fifty 900.00
Only
10 Supply & labour of G.I. union. Rupees One
(v) 40 mm 8 each 182.00 Hundred & Eighty 1456.00
Two Only
50mm Rupees Two
Hundred &
4 each 273.00 1092.00
Seventy Three
Only
11 Supply & labour of G.I. plain tee of approved brand and make
Rupees One
40mm 6 each 129.00 Hundred & 774.00
Twenty Nine Only

50mm Rupees One

9 each 199.00 Hundred & Ninety 1791.00
Nine Only
12 Supply & labour of G.I. reducing tee of approved brand and make Rupees One
(ix) 40 mm X 25 mm 4 each 141.00 Hundred & Fourty 564.00
One Only
13 Supplying, fitting and fixing Peet's valve fullway gunmetal standard
Rupees One
pattern best quality of approved brand bearing I.S.I. marking with fittings
Thousand Six
(tested to 21 kg per sq. cm.). 1 each 1646.00 1646.00
Hundred & Fourty
v) 40mm dia Six Only

iv) 50mm dia

Rupees Two
Thousand Three
1 each 2362.00 2362.00
Hundred & Sixty
Two Only
 Page 3

14 Labour for fitting and fixing high density poly-ethylene pipes or P.V.C.
pipes for above ground work including cost of jointing materials paints
etc. fitting and fixing all necessary specials, cutting pipes, making threads,
cutting holes in walls or R.C. floor where necessary and mending good all
damages excluding the cost of masonry or concrete work, if necessary, but
including the cost and fitting and fixing holder bat clamps(any floor) or for
underground work including cutting trenches upto 1.5 metre and refilling Rupees Thirty
48.00 mtr 37.00 1776.00
Seven Only
the same complete as per direction of the Engineer-in-charge.
(Payment will be made on centre line measurement of the total pipeline
including specials. )
(A)Above Ground
(v) 40 mm dia.

iii) 25mm dia Rupees Twenty

42.00 mtr 28.00 1176.00
Eight Only
vi) 50mm dia Rupees Fourty
24.00 mtr 40.00 960.00
Only
15 Supplying, fitting and fixing C.I. holder bat clamp including cutting holes
in wall etc. and mending good all damages in cement concrete with jhama
chips (4:2:1) and cement plaster (6:1) to match and curing complete in all Rupees Fourty
18 each 48.00 864.00
respect. Eight Only
v) 40mm

iii) 25mm dia Rupees Thirty

18 each 31.00 558.00
One Only
16 Labour for lowering plastic water storage tank and stacking in places as
directed. Rupees Two
ii) Above 1500 litre upto 5000 litre capacity 1 each 224.00 Hundred & 224.00
Twenty Four Only

17 Labour for punching hole in plastic water storage tank upto 50 mm dia.
Rupees Nineteen
4 each 19.00 76.00
Only

18 Supplying P.V.C. water storage tank of approved quality with closed top
Rupees Ten
with lid (Black) - Multilayer Thousand Four
(d) 2000 litre capacity 1 each 10434.00 10434.00
Hundred & Thirty
Four Only

19 Labour for hoisting plastic water storage tank.

(ii) Above 1500 litre upto 5000 litre capacity. Rupees Three
1 each 370.00 Hundred & 370.00
Seventy Only

20 Renewing high pressure polythene ball cock of approved quality with

Rupees One
polythene ball and aluminium lever complete for pipe of dia.: 1 each 165.00 Hundred & Sixty 165.00
(i) 32 mm Five Only
21 Uprooting and removing plants from the surface of walls
parapet etc and making good damages. (Repairing of
damages to be paid separately). Rupees Seventy
30 each 70.00 2100.00
Only
(a) Small plant of girth of exposed stem upto 75 mm. lift
upto 6 mtr.
Total estimated cost in Figures 74346.00
18% GST (B) 13382.00
1 % CESS on (A) +(B) 877.00

Estimate amount put to tender 88605.00

Quoted rate in Words Rupees Eighty Eight Thousand Six Hundred & Five Only

Assistant Engineer, PWD

Barrackpur Sub-Division.II
Barrackpore