http://www.ijcsjournal.com Volume X, Issue Y, No Z, 2022.

ISSN: 2348-6600
Reference ID: IJCS-000 PAGE NO: 000-999

Sample IJCS Paper for A4 Page Size

First Author#1, Second Author*2, Third Author#3
#
First-Third Department, First-Third University
Address Including Country Name
1
[email protected]
3
[email protected]
*
Second Company
Address Including Country Name
2
[email protected]

Abstract— This document gives formatting instructions III. EASE OF USE

for authors preparing papers for publication in the
Proceedings of an IEEE conference. The authors must All paragraphs must be indented. All paragraphs must
follow the instructions given in the document for the papers be justified, i.e. both left-justified and right-justified.
to be published. You can use this document as both an
instruction set and as a template into which you can type
A. Text Font of Entire Document
your own text. The entire document should be in Times New Roman
or Times font. Type 3 fonts must not be used. Other font
Index Terms—Component, formatting, style, styling, types may be used if needed for special purposes.
insert. (key words) Recommended font sizes are shown in Table 1.
B. Title and Author Details
I. INTRODUCTION (HEADING 1)
Title must be in 24 pt Regular font. Author name must
This document is a template. An electronic copy can be in 11 pt Regular font. Author affiliation must be in 10
be downloaded from the conference website. For ques- pt Italic. Email address must be in 9 pt Courier Regular
tions on paper guidelines, please contact the conference font.
publications committee as indicated on the conference
website. Information about final paper submission is TABLE I
FONT SIZES FOR PAPERS
available from the conference website.
Font Appearance (in Time New Roman or Times)
II. PAGE LAYOUT Size Regular Bold Italic
An easy way to comply with the conference paper 8 table caption (in reference item
formatting requirements is to use this document as a tem- Small Caps), (partial)
figure caption,
plate and simply type your text into it.
reference item
A. Page Layout 9 author email address abstract abstract heading
(in Courier), body (also in Bold)
Your paper must use a page size corresponding to A4 cell in a table
which is 210mm (8.27") wide and 297mm (11.69") long. 10 level-1 heading (in level-2 heading,
The margins must be set as follows: Small Caps), level-3 heading,
 Top = 19mm (0.75") paragraph author affiliation
 Bottom = 43mm (1.69") 11 author name
 Left = Right = 14.32mm (0.56") 24 title
Your paper must be in two column format with a space
of 4.22mm (0.17") between columns. All title and author details must be in single-column
format and must be centered.

All Rights Reserved ©2022 International Journal of Computer Science (IJCS Journal)
Published by SK Research Group of Companies (SKRGC) - Scholarly Peer Reviewed Research Journals
http://www.skrgcpublication.org/ Page 0
http://www.ijcsjournal.com Volume X, Issue Y, No Z, 2022. ISSN: 2348-6600
Reference ID: IJCS-000 PAGE NO: 000-999

Every word in a title must be capitalized except for width must be positioned either at the top or at the bottom
short minor words such as “a”, “an”, “and”, “as”, “at”, of the page.
“by”, “for”, “from”, “if”, “in”, “into”, “on”, “or”, “of”, Graphics may be full color. All colors will be retained
“the”, “to”, “with”. on the CDROM. Graphics must not use stipple fill pat-
Author details must not show any professional title terns because they may not be reproduced properly.
(e.g. Managing Director), any academic title (e.g. Dr.) or Please use only SOLID FILL colors which contrast well
any membership of any professional organization (e.g. both on screen and on a black-and-white hardcopy, as
Senior Member IEEE). shown in Fig. 1.
To avoid confusion, the family name must be written
as the last part of each author name (e.g. John A.K.
Smith).
Each affiliation must include, at the very least, the
name of the company and the name of the country where
the author is based (e.g. Causal Productions Pty Ltd, Aus-
tralia).
Email address is compulsory for the corresponding au-
thor.
C. Section Headings
No more than 3 levels of headings should be used. All
headings must be in 10pt font. Every word in a heading
must be capitalized except for short minor words as listed Fig. 1 A sample line graph using colors which contrast well both on
screen and on a black-and-white hardcopy
in Section III-B.
Fig. 2 shows an example of a low-resolution image
1) Level-1 Heading: A level-1 heading must be in which would not be acceptable, whereas Fig. 3 shows an
Small Caps, centered and numbered using uppercase Ro- example of an image with adequate resolution. Check
man numerals. For example, see heading “III. Page that the resolution is adequate to reveal the important de-
Style” of this document. The two level-1 headings which tail in the figure.
must not be numbered are “Acknowledgment” and “Ref- Please check all figures in your paper both on screen
erences”. and on a black-and-white hardcopy. When you check
2) Level-2 Heading: A level-2 heading must be in It- your paper on a black-and-white hardcopy, please ensure
alic, left-justified and numbered using an uppercase al- that:
phabetic letter followed by a period. For example, see  the colors used in each figure contrast well,
heading “C. Section Headings” above.  the image used in each figure is clear,
 all text labels in each figure are legible.
3) Level-3 Heading: A level-3 heading must be in-
E. Figure Captions
dented, in Italic and numbered with an Arabic numeral
followed by a right parenthesis. The level-3 heading must Figures must be numbered using Arabic numerals.
end with a colon. The body of the level-3 section imme- Figure captions must be in 8 pt Regular font. Captions of
diately follows the level-3 heading in the same paragraph. a single line (e.g. Fig. 2) must be centered whereas multi-
For example, this paragraph begins with a level-3 head- line captions must be justified (e.g. Fig. 1). Captions
ing. with figure numbers must be placed after their associated
figures, as shown in Fig. 1.
D. Figures and Tables
Figures and tables must be centered in the column.
Large figures and tables may span across both columns.
Any table or figure that takes up more than 1 column

All Rights Reserved ©2022 International Journal of Computer Science (IJCS Journal)
Published by SK Research Group of Companies (SKRGC) - Scholarly Peer Reviewed Research Journals
http://www.skrgcpublication.org/ Page 1
http://www.ijcsjournal.com Volume X, Issue Y, No Z, 2022. ISSN: 2348-6600
Reference ID: IJCS-000 PAGE NO: 000-999

H. Links and Bookmarks

All hypertext links and section bookmarks will be re-
moved from papers during the processing of papers for
publication. If you need to refer to an Internet email ad-
dress or URL in your paper, you must type out the ad-
dress or URL fully in Regular font.
I. References
The heading of the References section must not be
numbered. All reference items must be in 8 pt font.
Please use Regular and Italic styles to distinguish differ-
ent fields as shown in the References section. Number
the reference items consecutively in square brackets (e.g.
[1]).
When referring to a reference item, please simply use
the reference number, as in [2]. Do not use “Ref. [3]” or
“Reference [3]” except at the beginning of a sentence,
Fig. 2 Example of an unacceptable low-resolution image
e.g. “Reference [3] shows …”. Multiple references are
each numbered with separate brackets (e.g. [2], [3], [4]–
[6]).
Examples of reference items of different categories
shown in the References section include:
 example of a book in [1]
 example of a book in a series in [2]
 example of a journal article in [3]
 example of a conference paper in [4]
 example of a patent in [5]
 example of a website in [6]
 example of a web page in [7]
 example of a databook as a manual in [8]
 example of a datasheet in [9]
 example of a master’s thesis in [10]
 example of a technical report in [11]
 example of a standard in [12]
Fig. 3 Example of an image with acceptable resolution
I. CONCLUSIONS
The version of this template is V2. Most of the for-
F. Table Captions matting instructions in this document have been compiled
Tables must be numbered using uppercase Roman nu- by Causal Productions from the IEEE LaTeX style files.
merals. Table captions must be centred and in 8 pt Regu- Causal Productions offers both A4 templates and US Let-
lar font with Small Caps. Every word in a table caption ter templates for LaTeX and Microsoft Word. The La-
must be capitalized except for short minor words as listed TeX templates depend on the official IEEEtran.cls and
in Section III-B. Captions with table numbers must be IEEEtran.bst files, whereas the Microsoft Word templates
placed before their associated tables, as shown in Table 1. are self-contained. Causal Productions has used its best
efforts to ensure that the templates have the same appear-
G. Page Numbers, Headers and Footers ance.
Page numbers, headers and footers must not be used. Causal Productions permits the distribution and revi-
sion of these templates on the condition that Causal Pro-

All Rights Reserved ©2022 International Journal of Computer Science (IJCS Journal)
Published by SK Research Group of Companies (SKRGC) - Scholarly Peer Reviewed Research Journals
http://www.skrgcpublication.org/ Page 2
http://www.ijcsjournal.com Volume X, Issue Y, No Z, 2022. ISSN: 2348-6600
Reference ID: IJCS-000 PAGE NO: 000-999

ductions is credited in the revised template as follows:

“original version of this template was provided by cour-
tesy of Causal Productions
(www.causalproductions.com)”.

ACKNOWLEDGMENT
The heading of the Acknowledgment section and the
References section must not be numbered.
Causal Productions wishes to acknowledge Michael
Shell and other contributors for developing and maintain-
ing the IEEE LaTeX style files which have been used in
the preparation of this template. To see the list of con-
tributors,
please refer to the top of file IEEETran.cls in the IEEE
LaTeX distribution.

REFERENCES
[1] S. M. Metev and V. P. Veiko, Laser Assisted Microtechno-
logy, 2nd ed., R. M. Osgood, Jr., Ed. Berlin, Germany:
Springer-Verlag, 1998.

[2] Breckling, Ed., The Analysis of Directional Time

Series: Applications to Wind Speed and Direc-
tion, ser. Lecture Notes in Statistics. Berlin,
Germany: Springer, 1989, vol. 61.
[3] S. Zhang, C. Zhu, J. K. O. Sin, and P. K. T. Mok, “A novel
ultrathin elevated channel low-temperature poly-Si TFT,”
IEEE Electron Device Lett., vol. 20, pp. 569–571, Nov.
1999.
[4] M. Wegmuller, J. P. von der Weid, P. Oberson, and N.
Gisin, “High resolution fiber distributed measurements with
coherent OFDR,” in Proc. ECOC’00, 2000, paper 11.3.4, p.
109.
[5] R. E. Sorace, V. S. Reinhardt, and S. A. Vaughn, “High-
speed digital-to-RF converter,” U.S. Patent 5 668 842, Sept.
16, 1997.
[6] (2002) The IEEE website. [Online]. Available:
http://www.ieee.org/
[7] M. Shell. (2002) IEEEtran homepage on CTAN. [Online].
Available: http://www.ctan.org/tex-
archive/macros/latex/contrib/supported/IEEEtran/
[8] FLEXChip Signal Processor (MC68175/D), Motorola, 1996.
“PDCA12-70 data sheet,” Opto Speed SA, Mezzovico,
Switzerland.Karnik, “Performance of TCP congestion con-
trol with rate feedback: TCP/ABR and rate adaptive TCP/
IP,” M. Eng. thesis, Indian Institute of Science, Bangalore,
India, Jan. 1999.

[9] Padhye, V. Firoiu, and D. Towsley, “A

stochastic model of TCP Reno congestion avoid-
ance and control,” Univ. of Massachusetts, Am-
herst, MA, CMPSCI Tech. Rep. 99-02, 1999.
[10] Wireless LAN Medium Access Control (MAC) and Physical
Layer (PHY) Specification, IEEE Std. 802.11, 1997.

All Rights Reserved ©2022 International Journal of Computer Science (IJCS Journal)
Published by SK Research Group of Companies (SKRGC) - Scholarly Peer Reviewed Research Journals
http://www.skrgcpublication.org/ Page 3