High Performance Refrigerated Centrifuge

Large number of tubes and capacity up to 6.000 ml

 for Extra-Large Volumes
Catalog No. Description Voltage Phases Hz
HiCen XL with Touch Screen,
21 10 205 refrigerated 400/440 V 3 50/60 Hz
Standard for Europe
21 10 211 HiCen XL with Touch Screen, refrigerated 220 V 3 50/60 Hz

maximum capacity: 6 x 1000 ml

microprocessor controlled
14 angle rotors, 4 swing-out rotors
speed: 300 - 20,500 rpm, in steps of 100 rpm, HOLD(continuous) + SHORT(short runs)
g-force (RCF): 50,743 x g, in steps of 10 x g
timer: Touchscreen: h, m, s 99:59:59
HOLD for longer runs
9 acceleration and deceleration ramps
maintenance free, brushless induction drive
audible signal in case of error, password protected for Setings
stainless steel chamber with additional inner guard ring
overspeed detection, imbalance detection and cut-off
motorized lid lock, automatic lid opening, emergency lid lock release
large Touch Screen display for both current and preset values of speed/g-
force, time and temperature

Additional Options (Available on request for all models of

against surcharge)
Cat. No. Options
21 10 900 Water Cooling System (minimizes the heat output into the laboratory)
20 90 910 Inertgas (Nitrogen) Flushing Kat. Nr.
20 70 050
20 90 930 Password Protected Start
20 90 940 GLP Conform Data Management
20 90 970 Operating-Hours Indicator Kat. Nr.
20 70 300
Kat. Nr.20 90 551 Kat. Nr.
20 90 540

Kat. Nr. 20 90 501

+ 20 90 540

Kat. Nr.
Kat. Nr. 25 35 51
20 90 550

Swing-Out Rotors for

Cat. No. Type Max. Capacity Max. Speed Max. g-Force
For 2 x 3 microplates, incl. 2 carriers for plates up to 80 mm high + 2
20 97 100 AS 2.6 5,000 rpm 3,075 x g
plate holders

20 90 501 AS 4.500 4 x 500 ml, Basic rotor, buckets to be ordered separately

20 90 540 carrier For 4 x 4 microplates, Set of 4 carriers 4,000 rpm 2,719 x g
20 90 502 buckets 4 round buckets for 1 x 500 ml w./o. caps, resp. for adapters 5,200 rpm 5,290 x g
25 35 51 bottles Bottles 500ml PPCO (98 x 114 mm) with caps, 4 bottles
20 90 550 Trunnion rings 4 x (7 x 50 ml F), Set of 4 trunnion rings with adapters 5,200 rpm 5,466 x g
20 90 551 Trunnion rings 4 x (14 x 15 ml F), Set of 4 trunnion rings with adapters 5,200 rpm 5,435 x g
4 x 750 ml, Basic rotor incl. windshield, buckets to be ordered
20 70 060 AS 4.750
separately
20 70 400 carrier For 4 x 4 microplates, Set of 4 carriers 3,700 rpm 2,693 x g
20 70 300 buckets 4 round buckets for 1 x 750 ml each w./o. caps , resp. for adapters 4,500 rpm 4,800 x g
20 70 950 caps Caps for round buckets 750 ml, (pack of 2 caps)
20 70 650 Trunnion rings 4 x (8 x 50ml Falcon) 4.500 rpm 4.449 x g
20 70 615 Trunnion rings 4 x (19 x 15ml Falcon) 4.500 rpm 4.584 x g
20 70 050 AS 4.1000 4 x 1000 ml, Basic rotor, buckets to be ordered separately
20 70 400 carrier For 4 x 4 microplates, Set of 4 carriers 3,700 rpm 2,693 x g
20 70 300 buckets 4 round buckets for 1 x 750 ml each w./o. caps, resp. for adapters 3,600 rpm 3,072 x g
20 70 200 buckets 4 round buckets for 1 x 1000 ml each w./o. caps, resp. for adapters 3,600 rpm 3,362 x g
20 70 950 caps Caps for round buckets for 750ml or 1000 ml, (pack of 2 caps)
20 70 650 Trunnion rings 4 x (8 x 50ml Falcon) 3.600 rpm 2.847 x g
20 70 615 Trunnion rings 4 x (19 x 15ml Falcon) 3.600 rpm 2.934 x g

page 2 of 12
 Angle Rotors (with hermetically sealing lid)
Cat. No. Type Max. Capacity Angle Max. Speed Max. g-Force
20 96 100 AF 24.2 24 x 1.5/2.2 ml 45° 18,000 rpm 36,223 x g
20 75 100 AF 72.2 72 x 1.5/2.2 ml 40° 16,000 rpm 36,062 x g
20 94 100 AF 20.10 20 x 10 ml 25° 18,000 rpm 35,499 x g
20 26 100 AF 24.16 24 x 16 ml 28° 20,000 rpm 49,281 x g
20 45 100 AF 12.30 12 x 30 ml 28° 15,000 rpm 26,790 x g
AF 8.50.1
20 93 005 8 x 50 ml 34° 20,500 rpm 50,743 x g
Biosafe
20 93 100 AF 8.50.2 8 x 50 ml 25° 18,000 rpm 34,774 x g
AF 8.50.3
20 98 105 8 x 50 ml Falcon 40° 13,500 rpm 21,191 x g
Biosafe
AF 12.50
20 44 100 12 x 50 ml 34° 16,500 rpm 39,569 x g
Biosafe
AF 6.94
20 92 105 6 x 94 ml 25° 18,000 rpm 35,499 x g
Biosafe
20 22 100 AF 6.250 6 x 250 ml 30° 14,000 rpm 31,774 x g
20 23 100 AF 6.500 6 x 500 ml 30° 10,500 rpm 18.981 x g
20 24 100 AF 4.1000 4 x 1000 ml 22° 8,000 rpm 12,042 x g
20 25 100 AF 6.1000 6 x 1000 ml 25° 7,000 rpm 11,291 x g

Cat. No. 20 93 005

Cat. No. 20 25 100

Cat. No. 20 23 100

Accessories
Units
Cat. No. Accessories
per pack
25 80 70 Cleaning brush for all rotors with bores of 50 ml 1
25 80 80 Cleaning brush for all rotors with bores of 14/15/16 ml 1
25 81 20 Extractor tool for bottom pad for bottles 1
25 80 30 Tool M6 for the extraction of adapters out of rotors 1

Cat. No. 25 80 20 Cat. No. 25 80 30

resp. 25 81 20
Cat. No. 25 80 70
+ 25 80 80

For detailed Information about the comprehensive range of centrifuge tubes und bottles from our production and
their possible use in centrifuges of other manufacturers please refer to our catalog “Centrifuge Labware”.

We also manufacture the most popular tubes and bottles for Ultra Centrifuges.

page 3 of 12
Specification
Catalog No. (400/440V, 50/60 Hz, 3 Phases) 21 10 205

Maximum Capacity 6 x 1000 ml

Maximum Speed 20,500 rpm

Max. g-Force/RCF (depending on rotor) 50,743 x g

Display, User Interface Touch Screen Display

TM
Rotor Detection APRI System = Automatic Positive Rotor Identification for Herolab rotors
Program Memory 50 programs with Touch Screen Panel
Preset Speed Touch Screen: from 300 rpm to max. speed
Languages German, English
Preset Time Touchscreen: h, m, s 99:59:59, HOLD (continuous) + SHORT (short runs)
Preset Speed From 300 rpm up to max. speed with increments of 100 rpm
Preset g-Force/RCF With increments of 10 x g
Drive System Direct self-centering drive system with brushless induction motor
Speed Accuracy Deviation typically less than 0.2 %
Acceleration Time (depending on rotor) 30 sec. – 2.5 min.
Deceleration Time (depending on
40 sec. – 3.5 min.
rotor)
Acceleration/Deceleration Rates 9 ramps in steps of 15 sec. from 0 to 120 sec. in the range of 0 – 1.000 rpm
Braking System Dynamic electric brake system. Acoustic signal at the end of run or failure message - selectable
-20°C to +40°C
Temperature Set Range
with increments of 1°C
Cooling at Standstill / Fast cooling Yes / Yes
Temperature Control Accuracy ±2°C on calibrated rotor
Temperature Control System Bypass System
±4°C to ±10°C
Sample Protection
from preset temperature
Overheating Protection
1. Motor Yes
2. Rotor Chamber Yes
Refrigeration System CFC-free refrigerant

Overspeed detection
Imbalance detection and cut-off
Four point lid fixing
Safety Features Automatic motor driven lid lock with emergency lid lock release
Lid opening after the run - selectable
Stainless steel chamber with additional inner guard ring
Password protection - selectable

Dimensions (W x D x H): in cm 78.0 x 90.0 x 92.0

(in inches) (30.7 x 35.4 x 36.2)
Shipping Dimensions in cm 95.0 x 105.0 x 114.0
(in inches) (37.4 x 41.3 x 44.9)
Net Weight 380.0 kg
Gross Weight 410.0 kg

Herolab GmbH Laborgeräte

All products built by Herolab carry
Ludwig-Wagner-Str. 12
the CE sign.
69168 Wiesloch
Herolab has its own quality
GERMANY
management system according to
Tel.: +49 (0) 6222 – 5802-0
ISO 9001. WEEE-Reg. No.
Fax: +49 (0) 6222 – 5802-34
DE66734561
E-Mail: [email protected]
Herolab reserves the right to change technical specifications without prior notice. 2024-06 Internet: www.herolab.de

page 4 of 12
Tubes and Adapters for Rotors of
for Rotors AF 24.2 + AF 72.2
Tubes 2.0-2.2 ml 1.5 ml 0.5-0.7 ml 0.25-0.4 ml 0.2 ml Cat. No. 25 50 07

Tubes Ø x Length (mm) 11/13 x 40 11/13 x 40 8/10 x 28-31 Ø 6 mm ®

PCR Tubes

Material of Tubes + Tubes not available Tubes not available Tubes not available Tubes not available Tubes not available
Herolab Cat. No. from Herolab from Herolab from Herolab from Herolab from Herolab

Cat. No. 25 50 06 Cat. No. 25 50 05

Necessary Adapter --- ---

Herolab Cat. No. --- --- 25 50 06 25 50 05 25 50 07

Tubes per Adapter / Rotor - / 24 resp. 72 - / 24 resp. 72 1 / 24 resp. 72 1 / 24 resp. 72 1 / 24 resp. 72
(Pack of 6 Adapters) --- ---

Cat. No. 20 75 100

Cat. No. 20 94 100

Cat. No. 20 96 100

for Rotor AF 20.10

Tubes 10 ml AOR 13.5 ml
Tubes Ø x Length (mm) 16 x 80 16 x 76
PC: 25 24 01 Cat. No. 25 24 01 / 11 / 41 / 51
Material of Tubes + PPCO: 25 24 11
PPCO: 25 24 70
Herolab Cat. No. PE: 25 24 41
PF: 25 24 51

* Snap-on caps for 16 ml tubes available

Necessary Adapter --- --- (Cat No. 25 45 50 / 25 45 51)

Herolab Cat. No. --- ---

Tubes per Adapter / Rotor - / 20 - / 20
(Pack of 2 Adapters) --- ---

Cat. No. 25 27 00 / 20 / 40 / 51

Cat. No. 20 26 100

Cat. No. 25 29 51 / 61 / 65 / 71

for Rotor AF 24.16 AF 12.30

12/15 ml
Tubes 16 ml with rim 10 ml Glass 4.5 / 5 ml 3 ml Glass 1.5 ml 30 ml AOR
Glass
Tubes Ø x Length (mm) 18 x 100 18 x 102 13 x 100 12 x 75 10 x 75 11/13 x 40 25 x 92
PC: 25 27 00* PC: 25 29 51
Tubes not Tubes not Tubes not Tubes not
Material of Tubes + PPCO: 25 27 20* PPCO: 25 29 61
available from available from PP: 25 22 30 available from available from
Herolab Cat. No. PE: 25 27 40* PE: 25 29 65
Herolab Herolab Herolab Herolab
PF: 25 27 51* PF: 25 29 71

Necessary Adapter --- ---

Herolab Cat. No. --- 25 58 20 25 56 00 25 50 72 25 55 80 25 50 70 ---

Tubes per Adapter / Rotor - / 24 1 / 24 1 / 24 1 / 24 1 / 24 1 / 24 - / 12
(Pack of 2 Adapters) --- ---

page 5 of 12
Tubes and Adapters for Rotors of
for Rotor AF 8.50.1 + AF 8.50.2
Tubes 50ml AOR 50 ml with rim 50 ml with cap 45 ml Glass 30 ml AOR 30 ml Glass 16 ml with rim 12/15 ml Glass
Tubes Ø x Length (mm) 29 x 103 29 x 103 29 x 103 28 x 102 25 x 92 24 x 105 18 x 100 18 x 102
PC: 25 32 01 PC: 25 31 00 PC: 25 29 51 PC: 25 27 00
Tubes not
Material of Tubes + PPCO: 25 32 11 PPCO: 25 31 60 PC: 25 31 05 PPCO: 25 29 61 B: 25 11 10 PPCO: 25 27 20
B: 25 12 60 available from
Herolab Cat. No. PE: 25 32 15 PE: 25 31 30 PPCO: 25 31 45 PE: 25 29 65 HS: 25 11 41 PE: 25 27 40
Herolab
PF: 25 32 21 PF: 25 31 51 PF: 25 29 71 PF: 25 27 51

Necessary Adapter --- --- ---

Herolab Cat. No. --- --- --- 25 58 00 25 50 61 25 55 60 25 50 50 25 55 50

Tubes per Adapter / Rotor -/8 -/8 -/8 1/8 1/8 1/8 1/8 1/8
(Pack of 2 Adapters) --- --- ---

Tubes 10ml AOR 10 ml Glass 10 ml Glass 4.5/5 ml 3 ml Glass 1.5 ml 1 ml

Tubes Ø x Length (mm) 16 x 80 18 x 102 13 x 100 12 x 75 10 x 75 11 x 40 7 x 50
PC: 25 24 01
Tubes not Tubes not Tubes not Tubes not Tubes not
Material of Tubes + PPCO: 25 24 11
available from available from PP: 25 22 30 available from available from available from
Herolab Cat. No. PE: 25 24 41
Herolab Herolab Herolab Herolab Herolab
PF: 25 24 51

Necessary Adapter

Herolab Cat. No. 25 50 30 25 55 40 25 55 30 25 50 11 25 55 10 25 50 10 25 50 00

Tubes per Adapter / Rotor 1/8 1/8 1/8 2 / 16 2 / 16 2 / 16 4 / 32
(Pack of 2 Adapters)

Cat. No. 25 31 00 / 60 / 30 / 51
Cat. No. 25 32 01 / 11 / 15 / 21 Cat. No. 25 31 05 / 45

Kat.-Nr. 20 93 005

for Rotor AF 8.50.3

Tubes 50 ml Falcon 50ml AOR 50 ml with cap 30 ml AOR 15 ml Falcon

Tubes Ø x Length (mm) 29 x 118 29 x 103 29 x 103 25 x 92 17 x 122
PC: 25 32 01 PC: 25 29 51
Material of Tubes + Tubes not available PPCO: 25 32 11 PC: 25 31 05 PPCO: 25 29 61 Tubes not available
Kat.-Nr. 20 93 100 Herolab Cat. No. from Herolab PE: 25 32 15 PPCO: 25 31 45 PE: 25 29 65 from Herolab
PF: 25 32 21 PF: 25 29 71

Necessary Adapter ---

Herolab Cat. No. --- 25 53 82 25 53 82 25 50 62 25 53 80

Tubes per Adapter / Rotor -/8 1/8 1/8 1/8 1/8
(Pack of 2 Adapters) ---
Kat.-Nr. 20 98 100

page 6 of 12
Tubes and Adapters for Rotors of
for Rotor AF 6.250
100/120 80 ml 50 ml 50 ml 16 ml with 15 ml
Tubes/Bottles 250 ml 250 ml 200 ml
ml AOR AOR FALCON rim FALCON
10 ml
Tubes Ø x Length
62 x 122 62 x 122 60 x 115 40 x 115 38 x 105 24 x 105 24 x 105 18 x 100 17 x 122 13 x 100
(mm)
PC: 25 34 01 round
PPCO: 25 34 bottom: PC: 25 32 41 PC: 25 32 01 PC: 25 27 00
Tubes not Tubes not
Material of Tubes 21 PC: 25 34 41 PPCO: 25 32 PPCO: 25 32 Tubes not PPCO: 25 27 Tubes not
available 100 ml: available
+ PE: 25 34 31 PPCO: 25 34 45 11 available from 20 available from
from PC: 25 33 00 from
Herolab Cat. No. PF: 25 34 39 45 PE: 25 32 47 PE: 25 32 15 Herolab PE: 25 27 40 Herolab
Herolab Herolab
PP black: 25 34 PE: 25 34 47 PF: 25 32 49 PF: 25 32 21 PF: 25 27 51
12 PF: 25 34 49

Necessary
---
Adapter

Herolab Cat. No. --- 25 51 90 25 58 10 25 51 70 On requestOn request 25 51 75 25 51 30 25 51 35 25 51 10

Tubes per Adapter /
- 1/6 1/6 1/6 1/6 1/6 1/6 5 / 30 4 /24 9 / 54
Rotor
(pack of 6
(Pack of 2 Adapters) pads)

Tubes 4.5/5 ml 3 ml 1.5 ml

Tubes Ø x Length (mm) 12 x 75 10 x 75 11/13 x 40
Tubes not Tubes not
Material of Tubes +
PP: 25 22 30 available from available from
Herolab Cat. No.
Herolab Herolab
Cat. No. 25 34 41 / 43 / 45 / 47 / 49

Necessary Adapter

Herolab Cat. No. 25 51 00 25 50 90 25 52 10

Kat.-Nr. 20 22 100
Tubes per Adapter / Rotor 9 / 54 15 / 90 8 / 48
Cat. No. 25 34 01 / 21 / 31 / 39 / 12
(Pack of 2 Adapters)

AF 4.1000
** Use the Ø 98 mm bottles in angle rotors for 98 mm Ø
for Rotor AF 6.500 bottles only with cover support ring. For rotors for
100 mm Ø bottles use the stainless steel cup 25 13 511 .
AF 6.1000
Bottles 500 ml Then pay attention to the total weight per rotor bore! 1000 ml
The 100 mm bottles are wide-mouth bottles with an
Ø x Length (mm) 70 x 165 opening of 70 mm. The 98 mm Ø bottles are specially (100 x 181)
designed for the rotor AF 6.1000 provided.
PC: 25 35 01* (PPCO: 25 37 50**
Material of Tubes + PPCO: 25 35 21* for Rotor 20 24 110
* For safety reasons,
Herolab Cat. No. PE: 25 35 31* always use 500 ml
only)
PP black: 25 35 12* bottles with collar
support ring.
(Catalog No. 25 52 41!
Kat.-Nr. 25 35 65 / 75 98 x 175

Wide neck bottles Cap with support ring:

Necessary Adapter ! PC: 25 35 65**
PPCO: 25 35 75**
Herolab Cat. No. 98 x 190
Tubes per Adapter / Rotor -- / 6-- PPCO: 25 37 80**

(Pack of 4 Adapters) --- Kat.-Nr. 25 35 01 / 21 / 31 / 12 ---

-/6
Cat.-No. Cat.-No.
25 37 80 25 37 50

Kat.-Nr. 20 23 100

Kat.-Nr. 20 24 100

Kat.-Nr. 20 25 100

page 7 of 12
Tubes and Adapters for Rotors of
for rotor AF 6.94
94 ml 80 ml AOR
38 x 102 38 x 105
thick-walled
PC: 25 32 41
PC: 25 32 80
PPCO: 25 32 45
PPCO: 25 32 60
PE: 25 32 47
thick-w. w. thread
PF: 25 32 49
PC: 25 32 90
Kat.-Nr. Kat.-Nr.
25 32 90 + 25 46 82 25 30 20 + 25 46 85
Kat.-Nr. 20 92 100 38,5 ml
--- ---
Adapter für Röhrchen (38,5 ml),
17 ml, 13,5 ml, 6,5 ml und 4,4 ml
Kat.-Nr. 25 32 41 / 45 / 47 / 49 sind auf Anfrage erhältlich.
--- ---

-/6 -/6

--- ---

AS 4.750 + AS 4.1000
for Rotor AS 2.6 with set of Microtiter Plate carriers
Plates Microtiter Plates Deepwell Plates Microtiter Plates Deepwell Plates
Total Height of Plates up to 80 mm up to 80 mm up to 64 mm up to 64 mm

Material of Tubes + Plates not available Plates not available Plates not available Plates not available
Herolab Cat. No. from Herolab from Herolab from Herolab from Herolab

Necessary Adapter --- --- --- ---

Herolab Cat. No. --- --- --- ---

Tubes per Adapter / Rotor - / 2-6 - / 2-4 - / 4-12 - / 4-8
--- --- --- ---

Cat. No. 20 70 060

Cat. No. 20 70 050

Cat. No. 20 97 105

Cat. No. 20 97 100

page 8 of 12
Tubes and Adapters for
for Rotor AS 4.500
Tubes/Bottles 500 ml 50 ml Falcon 15 ml Falcon
Tubes Ø x Length (mm) 98 x 114 29 x 118 17 x 122
Material of Tubes + PPCO: 25 35 51
Tubes not available Tubes not available
Herolab Cat. No. PPCO: 25 37 65
from Herolab from Herolab
(98 x 112 / W70)
Cat. No. 20 90 501 + 20 90 511
+ 20 90 530 + 20 90 535

Necessary Adapter ---

Herolab Cat. No. --- 20 90 530 20 90 535

Tubes per Adapter / Rotor -/4 5 / 20 8 / 32
(Pack of 2 Adapters) ---

Cat. No. 20 70 060

Cat. No. 25 35 51

page 9 of 12
Tubes and Adapters for Kat.-Nr. 25 35 62 / 72 Kat.-Nr. 25 35 80 / 81

Cat. No. 20 70 060 Cat. No. 20 70 050

Cat. No. 25 34 01 / 21 / 31 / 39 / 12

for Rotor AS 4.750 + AS 4.1000

with set of round buckets for bottles or adapters Kat.-Nr. 20 70 200 Kat.-Nr. 20 70 300

Tubes/Bottles 1000 ml 750 ml 500 ml 250 ml 250 ml 100 ml 50 ml Falcon

Tubes Ø x Length (mm) 98 x 175 98 x 152 70 x 165 62 x 122 Ø 63 40 x 115 29 x 118
PC: 25 34 01 Conical bottles
PC: 25 35 62 PC: 25 35 80 PC: 25 35 01*
PPCO: 25 34 21
Material of Tubes + PPCO: 25 35 72 PPCO: 25 35 81 PPCO: 25 35 21* Tubes not available
PE: 25 34 31 Bottles not PC: 25 33 00
Herolab Cat. No. PPCO: 25 37 85 PPCO: 25 37 70 PE: 25 35 31* from Herolab
PF: 25 34 39 available from
(98 x 173 / W70) (98 x 136 / W70) PP black: 25 35 12*
PP black: 25 34 12 Herolab
--- ---
Can only be used Can only be used
in 1000 ml buckets in 750 ml buckets
Necessary Adapter No. 20 70 200 No. 20 70 300
of rotor AS 4.1000 of rotor AS 4.1000
directly directly
Herolab Cat. No. --- --- 20 70 210 20 70 220 20 70 215 20 70 225 20 70 230
Tubes per Adapter / Rotor -/4 -/4 1/4 1/4 1/4 3 / 12 5 / 20
--- ---

* For safety reasons always use 500 ml bottles with cover support ring (Cat. No. 25 52 41)!

Tubes 50ml AOR 50 ml with rim 50 ml with cap 30 ml AOR 15ml 15 ml Falcon 10ml AOR
Tubes Ø x Length (mm) 29 x 103 29 x 103 29 x 103 25 x 92 17 x 87/119 17 x 122 16 x 80
PC: 25 32 01 PC: 25 31 00 PC: 25 29 51 PC: 25 24 01
Tubes not
Material of Tubes + PPCO: 25 32 11 PPCO: 25 31 60 PC: 25 31 05 PPCO: 25 29 61 Tubes not available PPCO: 25 24 11
available from
Herolab Cat. No. PE: 25 32 15 PE: 25 31 30 PPCO: 25 31 45 PE: 25 29 65 from Herolab PE: 25 24 41
Herolab
PF: 25 32 21 PF: 25 31 51 PF: 25 29 71 PF: 25 24 51

Necessary Adapter

Herolab Cat. No. 20 70 235 20 70 240 20 70 250 20 70 245 20 70 255

Tubes per Adapter / Rotor 7 / 28 8 / 32 18 / 72 12 / 48 20 / 80

Cat. No. 25 35 01 / 21 / 31 / 12 Cat. No. 25 34 01 / 21 / 31 / 39 / 12

Tubes 7 ml 7 ml 5 ml 0.5 ml
Tubes Ø x Length (mm) Ø 13.5 Ø 16.5 Ø 13.5 Ø 9.5

Tubes not Tubes not Tubes not Tubes not Cat. No. 25 32 01 / 11 / 15 / 21 + 25 31 05 / 45 / 00 / 60 / 30 / 51
Material of Tubes +
available from available from available from available from
Herolab Cat. No.
Herolab Herolab Herolab Herolab

Cat. No.
Necessary Adapter Cat. No. 25 31 00 / 60
25 32 01 / 11 25 31 30/ 51
25 32 15 / 21

Herolab Cat. No. 20 70 260 20 70 265 20 70 270 20 70 275

Tubes per Adapter / Rotor 32 / 128 21 / 84 35 / 140 60 / 240

Cat. No. Cat. No.

25 31 05 / 45 25 29 51 / 61
25 32 65 / 71

page 10 of 12
 Herolab Tubes for Rotors of
Cat. No. Description Ø x Length (mm) Pieces/Pack
25 22 30 Tubes 4.5 ml PP-RB 12 x 75 1000
25 24 01 Tubes 10 ml PC-AOR with screw cap 16 x 80 10
25 24 11 Tubes 10 ml PPCO-AOR with screw cap 16 x 80 10
25 24 41 Tubes 10 ml PE-AOR with screw cap 16 x 80 10
25 24 51 Tubes 10 ml PF-AOR with screw cap 16 x 80 2
25 24 80 Tubes 13,5 ml PC thick-walled UC, 16 x 76 mm 16 x 76 50
25 24 90 Tubes 13,5 ml PC thick-walled with thread UC, 16 x 76 mm 16 x 76 50
25 25 60 Tubes 14 ml PC-RB 18 x 75 10
25 27 00 Tubes 16 ml PC-RB/FL 18 x 100 10
25 27 20 Tubes 16 ml PPCO-RB/FL 18 x 100 10
25 27 40 Tubes 16 ml PE-RB/FL 18 x 100 10
25 27 51 Tubes 16 ml PF-RB/FL 18 x 100 2
25 29 51 Tubes 30 ml PC-AOR with screw cap 25 x 92 10
25 29 61 Tubes 30 ml PPCO-AOR with screw cap 25 x 92 10
25 29 65 Tubes 30 ml PE-AOR with screw cap 25 x 92 10
25 29 71 Tubes 30 ml PF-AOR with screw cap 25 x 92 2
25 30 20 Tubes 38.5 ml PC thick-walled with thread UC 25 x 89 50
25 30 40 Tubes 38.5 ml PC thick-walled UC 25 x 89 50
25 30 50 Tubes 38.5 ml PPCO thin-walled UC 25 x 89 50
25 30 60 Tubes 38.5 ml PPCO thick-walled UC 25 x 89 50
25 31 00 Tubes 50 ml PC-RB/FL 29 x 103 10
25 31 05 Tubes 50 ml PC-RB/FL with Loop Cap 29 x 103 10
25 31 30 Tubes 50 ml PE-RB/FL 29 x 103 10
25 31 45 Tubes 50 ml PPCO-RB/FL with Loop Cap 29 x 103 10
25 31 51 Tubes 50 ml PF-RB/FL 29 x 103 2
25 31 60 Tubes 50 ml PPCO-RB/FL 29 x 103 10
25 32 01 Tubes 50 ml PC-AOR with screw cap 29 x 103 10
25 32 11 Tubes 50 ml PPCO-AOR with screw cap 29 x 103 10
25 32 15 Tubes 50 ml PE-AOR with screw cap 29 x 103 10
25 32 21 Tubes 50 ml PF-AOR with screw cap 29 x 103 2
25 32 41 Tubes 80 ml PC-AOR with screw cap 38 x 105 10
25 32 45 Tubes 80 ml PPCO-AOR with screw cap 38 x 105 10
25 32 47 Tubes 80 ml PEC-AOR with screw cap 38 x 105 10
25 32 49 Tubes 80 ml PF-AOR with screw cap 38 x 105 2
25 32 50 Tubes 94 ml PP-RB 38 x 106 10
25 32 60 Tubes 94 ml PPCO thick-walled UC 38 x 102 25
25 32 80 Tubes 94 ml PC thick-walled UC 38 x 102 25
25 32 90 Tubes 94 ml PC thick-walled with thread UC 38 x 102 25
25 33 00 Tubes 100 ml PC-RB/G 40 x 115 2
25 33 10 Tubes 120 ml PP-RB 40 x 115 10
25 34 01 Bottles 250 ml PC-FB with screw cap 62 x 122 6
25 34 12 Bottles 250 ml PP black FB with screw cap 62 x 122 6
25 34 21 Bottles 250 ml PPCO-FB with screw cap 62 x 122 6
25 34 31 Bottles 250 ml PE-FB with screw cap 62 x 122 6
25 34 39 Bottles 250 ml PF-FB with screw cap 62 x 122 2
25 34 41 Bottles 250 ml PC-RB with screw cap 62 x 122 6
25 34 43 Bottles 250 ml PP-RB with screw cap 62 x 122 6
25 34 45 Bottles 250 ml PPCO-RB with screw cap 62 x 122 6
25 34 47 Bottles 250 ml PE-RB with screw cap 62 x 122 6
25 34 49 Bottles 250 ml PF-RB with screw cap 62 x 122 2
25 34 81 Bottles 290 ml PC-FB with screw cap 62 x 137 6

page 11 of 12
Cat. No. Description Ø x Length (mm) Pieces/Pack
25 34 87 Bottles 290 ml PE-FB with screw cap 62 x 137 6
25 35 01 Bottles 500 ml PC-FB with screw cap 70 x 165 6
25 35 12 Bottles 500 ml PP black-FB with screw cap 70 x 165 2
25 35 21 Bottles 500 ml PPCO-FB with screw cap 70 x 165 6
25 35 31 Bottles 500 ml PE-FB with screw cap 70 x 165 6
25 35 51 Bottles 500 ml PPCO-FB with screw cap (for AS 4.500 only) 98 x 114 4
25 35 62 Bottles 1000 ml PC-FB with screw cap 98 x 175 4
25 35 65 Bottles 1000 ml PC-FB with screw cap and neck support 98 x 175 4
25 35 72 Bottles 1000 ml PPCO-FB with screw cap 98 x 175 4
25 35 75 Bottles 1000 ml PPCO-FB with screw cap and neck support 98 x 175 4
25 35 80 Bottles 750 ml PC-FB with screw cap 98 x 152 4
25 35 81 Bottles 750 ml PPCO-FB with screw cap 98 x 152 4
25 37 50 Bottle 1.000 ml, PPCO, wide mouth of 70 mm, including Sealing Screw Cover with Handle 100 x 181 4
25 37 65 PPCO-Bottle 500 ml, with sealing cap, wide mouth of 70 mm - only for AS 4.500 98 x 112 4
25 37 70 PPCO-Bottle 750 ml, with sealing cap, wide mouth of 70 mm - only for AS 4.750 98 x 140 4
25 37 85 PPCO-Bottle 1000 ml, with sealing cap, wide mouth of 70 mm – only for AS 4.1000 98 x 173 4
25 46 82 Screw cap, aluminum, for UC tubes 94 ml 1
25 52 41 Support ring for bottles 500 ml 6

UC Ultra Centrifuge Tubes CB Conical Bottom

AOR Advanced Oak Ridge FB Flat Bottom
PC Polycarbonate RB Round Bottom
PE Polyethylene FL Flange (Rim)
PF Polyflor®
PPCO Polypropylene Copolymer

Herolab reserves the right to change technical specification without prior notice.

page 12 of 12