SAP2000 v26.1.

0 Ultimate 64-bit (Analysis Build 9975/64)

File: C:\Users\Duhan\Downloads\tugas final.LOG

BEGIN ANALYSIS 2024/11/12 22:05:14

RUNNING ANALYSIS AS A SEPARATE PROCESS

USING THE ADVANCED SOLVER (PROVIDES LIMITED INSTABILITY

INFORMATION)

NUMBER OF JOINTS = 3632

WITH RESTRAINTS = 29

NUMBER OF FRAME/CABLE/TENDON ELEMENTS = 1695

NUMBER OF SHELL ELEMENTS = 3074

NUMBER OF CONSTRAINTS/WELDS = 4

NUMBER OF LOAD PATTERNS = 3

NUMBER OF ACCELERATION LOADS = 12

NUMBER OF LOAD CASES = 6

NUMBER OF MASS SOURCES = 1

UNITS (FORCE, LENGTH, TEMPERATURE, TIME) = kN, m, °C, sec

GRAVITATIONAL ACCELERATION = 9.806650

ADDRESSABLE PHYSICAL MEMORY (RAM) = 15.939 GB

PARALLELIZATION OF ANALYSIS OPERATIONS:

(Env. variable SAPFIRE_NUM_THREADS not set)

NUMBER OF THREADS: STATE (AUTOMATIC) = 4

NUMBER OF THREADS: STIFFNESS (AUTOMATIC) = 4

NUMBER OF THREADS: EVENT (AUTOMATIC) = 4

NUMBER OF THREADS: MOVE (AUTOMATIC) = 4

NUMBER OF THREADS: RESPONSE (AUTOMATIC) = 4

NUMBER OF THREADS: SOLVE (AUTOMATIC) = 4

NUMBER OF THREADS: FORM (AUTOMATIC) = 4

ELEMENT FORMATION 22:05:14

NUMBER OF COUPLED CONSTRAINT EQUATIONS = 0

LINEAR EQUATION SOLUTION 22:05:14

FORMING STIFFNESS AT ZERO (UNSTRESSED) INITIAL CONDITIONS

TOTAL NUMBER OF EQUILIBRIUM EQUATIONS = 20577

NUMBER OF NON-ZERO STIFFNESS TERMS = 534446

---------------------------------

BASIC STABILITY CHECK FOR LINEAR LOAD CASES:

NUMBER OF NEGATIVE STIFFNESS EIGENVALUES SHOULD BE ZERO FOR

STABILITY.

(NOTE: FURTHER CHECKS SHOULD BE CONSIDERED AS DEEMED

NECESSARY,

SUCH AS REVIEWING EIGEN MODES FOR MECHANISMS AND RIGID-BODY

MOTION)

NUMBER OF NEGATIVE EIGENVALUES = 0, OK.

---------------------------------

LINEAR STATIC CASES 22:05:15

USING STIFFNESS AT ZERO (UNSTRESSED) INITIAL CONDITIONS

TOTAL NUMBER OF CASES TO SOLVE = 3

NUMBER OF CASES TO SOLVE PER BLOCK = 3

LINEAR STATIC CASES TO BE SOLVED:

CASE: DEAD

CASE: SDL

CASE: LIVE

EIGEN MODAL ANALYSIS 22:05:15

CASE: MODAL

USING STIFFNESS AT ZERO (UNSTRESSED) INITIAL CONDITIONS

NUMBER OF STIFFNESS DEGREES OF FREEDOM = 20577

NUMBER OF MASS DEGREES OF FREEDOM = 10119

MAXIMUM NUMBER OF EIGEN MODES SOUGHT = 12

MINIMUM NUMBER OF EIGEN MODES SOUGHT = 1

NUMBER OF RESIDUAL-MASS MODES SOUGHT = 0

NUMBER OF SUBSPACE VECTORS USED = 24

RELATIVE CONVERGENCE TOLERANCE = 1.00E-09

FREQUENCY SHIFT (CENTER) (CYC/TIME) = .000000

FREQUENCY CUTOFF (RADIUS) (CYC/TIME) = -INFINITY-

ALLOW AUTOMATIC FREQUENCY SHIFTING = YES

Original stiffness at shift : EV= 0.0000000E+00, f= .000000, T= -

INFINITY-

Number of eigenvalues below shift = 0

Found mode 1 of 12: EV= 1.2532096E+02, f= 1.781689, T=

0.561265

Found mode 2 of 12: EV= 1.3991733E+02, f= 1.882591, T=

0.531183

Found mode 3 of 12: EV= 1.4588173E+02, f= 1.922297, T=

0.520211
Found mode 4 of 12: EV= 1.2971323E+03, f= 5.732080, T=
0.174457

Found mode 5 of 12: EV= 1.4148211E+03, f= 5.986471, T=

0.167043

Found mode 6 of 12: EV= 1.4546520E+03, f= 6.070154, T=

0.164740

Forming stiffness, new shift: EV= 2.8583227E+03, f= 8.508946, T=

0.117523

Number of eigenvalues below shift = 6

Found mode 7 of 12: EV= 3.0087605E+03, f= 8.729994, T=

0.114548

Found mode 8 of 12: EV= 3.1563529E+03, f= 8.941552, T=

0.111837

Found mode 9 of 12: EV= 3.8756050E+03, f= 9.908089, T=

0.100928

Found mode 10 of 12: EV= 4.1248705E+03, f= 10.221751, T=

0.097831

Found mode 11 of 12: EV= 4.1905458E+03, f= 10.302804, T=

0.097061

Found mode 12 of 12: EV= 4.2568429E+03, f= 10.383982, T=

0.096302

NUMBER OF EIGEN MODES FOUND = 12

NUMBER OF ITERATIONS PERFORMED = 20

NUMBER OF STIFFNESS SHIFTS = 1

RESPONSE-SPECTRUM ANALYSIS 22:05:22

CASE: RSPX

TYPE OF EXCITATION = STANDARD GROUND ACCELERATION

USING MODES FROM CASE: MODAL

NUMBER OF DYNAMIC MODES TO BE USED = 12

RESPONSE-SPECTRUM ANALYSIS 22:05:22

CASE: RSPY

TYPE OF EXCITATION = STANDARD GROUND ACCELERATION

USING MODES FROM CASE: MODAL

NUMBER OF DYNAMIC MODES TO BE USED = 12

ANALYSIS COMPLETE 2024/11/12 22:05:22