Scribd
Upload
25 views

HX4002

Uploaded by

yrq65220
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

HX4002

Uploaded by

yrq65220
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Low Noise Regulated Charge Pump in SOT23-6 HX4002

Features Description
 Fixed 3.3V or 5V Outputs
 VIN Range: 1.8V to 4.5V(HX4002-3.3) The HX4002 is a low noise, constant
2.7V to 5.5V(HX4002-5) frequency (1.2MHz) switched capacitor
 Output Current: Up to 200mA (HX4002-5) voltage doublers. The HX3200-3.3can
Up to 50mA (HX4002-3.3) produce a regulated output voltage of
 Constant Frequency Operation at All 3.3Vfrom a minimum input voltage of 1.8V (2
Loads alkaline cells)whereas the HX3200-5 can
 Low Noise Constant Frequency (1.2MHz) produce 5V from a minimum of 2.7V (Li-Ion
Operation battery) input.
 Shutdown Disconnects Load from Input
 Shutdown Current <1µA HX4002 feature constant frequency
 Short-Circuit/Thermal Protection operation at any load. Built-in soft-start
 Available in Low Profile 6-Lead sot23 circuitry prevents excessive inrush current
Package during start-up. Thermal shutdown and
current-limit circuitry allow the parts to
Application survive a continuous short-circuit from
VOUT to GND.

 2 AA Cell to 3.3V
 Li-Ion to 5V
High switching frequency minimizes overall

 USB On-The-Go Devices


solution footprint by allowing the use of tiny

 White LED Drivers


ceramic capacitors. In shutdown, the load is

 Handheld Devices
disconnected from the input and the
quiescent current is reduced to <1µA.

The HX4002 is available in the 6-pin SOT23

Pin Assignment
PIN NUMBER
PIN NAME
SOT-23-6
6 5 4
1 VOUT

2 GND

3 EN

4 C-

5 VIN

6 C+
1 2 3

Wuxi Hexin Semiconductor Co., Ltd. - 1 -


Typical Application

Regulated 3.3V Output

Lithium-Ion Battery to 5V White or Blue LED Driver

USB Port to Regulated 5V Power Supply

Wuxi Hexin Semiconductor Co., Ltd. - 2 -


Electrical Characteristics
The·denotes the specifications which apply over the full operating temperature range, otherwise

specifications are at TA = 25°C. VIN = 3.6V EN= VIN , CIN=Cout=2.2uF or 1uF unless otherwise noted.

PARAMETER CONDITIONS MIN TYP MAX UNITS

Input Voltage Range(VIN) HX4002-3.3 · 1.8 4.5


V
HX4002-5 · 2.7 5.5
2.7V <VIN < 5.5V, IOUT < 65mA
Output Voltage
3.1V < VIN < 5.5V, IOUT < 150mA V
Range(VOUT) · 4.7 5 5.2
EN=0V,VOUT = 0V
ISHDN Shutdown Current · 0.3 0.5 1 µA
IOUT = 0mA, VIN = 2.7V
No load input current · 0.11 mA

VOUT = 0V
Output current limit · 300 mA

IOUT = 100mA
Output Ripple (VR) 20 mVP-P

Efficiency VIN = 2.7V, IOUT =80 mA 83 %

VIN = 2.7V, VOUT = 4.5V


Open-Loop Ouput Resistance · 6 Ω
ROL =(2VIN-VOUT)/IOUT

Switching Frequency(fosc) · 0.6 1.2 1.8 MHz


High Level Input Voltage (VIH)
· 1.3 V

Low Level Input Voltage (VIL) · 0.4 V


Input Current (IIH)
· -1 1 µA
Input Current (IIL)
EN=0V · -1 1 µA

Absolute Maximum Ratings


 VIN …………………………………………………………….…….….…..….………- 0.3 V ～ +6V
 VOUT ………………………………………………………………………………….….- 0.3 V ～+ 5.5 V
 VOUT Short-circuit Duration.…………………………………………..….………………indefinite
 VEN……………………………………………………...…………………….…...……- 0.3 V ～ +6V
 Operating Temperature Range ……………………………………………...……- 30 ℃ ～ + 85℃
 Lead Temperature (Soldering 10 sec.) ……………………………………..………………+ 300℃
 Storage Temperature Range ………………………………………………..…..- 65℃ ～ + 125℃

Wuxi Hexin Semiconductor Co., Ltd. - 3 -


Functional Diagram

Application Information
VOUT (Pin 1): Regulated Output Voltage. VOUT should be bypassed with a low ESR ceramic
capacitor providing at least 2µF of capacitance as close to the pin as possible for best
performance.

GND(Pin 2): Ground. These pins should be tied to a ground plane for best performance. The
exposed pad must be soldered to PCB ground to provide electrical contact and optimum
thermal performance.

EN (Pin3): Active Low Shutdown Input. This pin must not be allowed to float.

C-(Pin 4): Flying Capacitor Positive Terminal.

µF to 4.7µ
VIN (Pin 5): Input Supply Voltage. VIN should be bypassed with a 1µ µF low impedance
ceramic capacitor.

C+ (Pin6): Flying Capacitor Positive Terminal.

Wuxi Hexin Semiconductor Co., Ltd. - 4 -


Packaging Information
SOT-23-6 Package Outline Dimension

Symbol Dimensions In Millimeters Dimensions In Inches


Min Max Min Max
A 1.050 1.250 0.041 0.049
A1 0.000 0.100 0.000 0.004
A2 1.050 1.150 0.041 0.045
b 0.300 0.500 0.012 0.020
c 0.100 0.200 0.004 0.008
D 2.820 3.020 0.111 0.119
E 1.500 1.700 0.059 0.067
E1 2.650 2.950 0.104 0.116
e 0.950(BSC) 0.037(BSC)
e1 1.800 2.000 0.071 0.079
L 0.300 0.600 0.012 0.024
θ 0° 8° 0° 8°

Wuxi Hexin Semiconductor Co., Ltd. - 5 -

You might also like