Scribd
Upload
366 views3 pages

DEVELOPMENT OF TORICONE

Uploaded by

Impes Innovation
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
366 views3 pages

DEVELOPMENT OF TORICONE

Uploaded by

Impes Innovation
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

A B C D E F G

2 DEVELOPMENT OF TORICONE Job No.


3 This program should be used for toricone with knuckle on Client MRPL
4 ends. Consultant JACOBS
5 File Name: c:\usr\lot\development of toricone.123 Eqpt. No. DA-31101
6 Date 16/07/2009
7 Description - [ - ] CS Cone
8 Cone Length (TL to TL) L [ mm ] 3200.00
9
10 Small End Dimensions:
11 - Inside Diameter (After Forming) Ds [ mm ] 3400.00
12 - Inside Knuckle Radius Rks [ mm ] 340.00
13 - Nominal Thickness ts [ mm ] 22.00
14 - Straight Flange SFs [ mm ] 50.00
15
16 Large End Dimensions:
17 - Inside Diameter (After Forming) Dl [ mm ] 6600.00
18 - Inside Knuckle Radius Rkl [ mm ] 660.00
19 - Nominal Thickness tl [ mm ] 22.00
20 - Straight Flange SFl [ mm ] 50.00
21
22 Trimming Allowance at Small End [ mm ] 25.00
23 Trimming Allowance at Large End [ mm ] 25.00
24
25 Dimensions of Cone Developemnt:
26 - Small Radius Before Trimming [ mm ] 3419
27 - Small Radius After Trimming [ mm ] 3444
28 - Large Radius Before Trimming [ mm ] 7165
29 - Large Radius After Trimming [ mm ] 7140
30 - Development Angle [ ° ] 172.09
31
32 Dimensions Before Forming:
33 - Inside Diameter of Small End Before Trimming [ mm ] 3249
34 - Inside Diameter of Small End After Trimming [ mm ] 3273
35 - Inside Diameter of Large End Before Trimming [ mm ] 6831
36 - Inside Diameter of Large End After Trimming [ mm ] 6807
37 - Height Before Trimming [ mm ] 3291
38
39 Dimensions of Plate:
40 - Length [ mm ] 14296.000
41 - Width [ mm ] 6929.000
42 - Thickness [ mm ] 22.000
43
44
45
46
47
48
A B C D E F G
49
50
51
52
53
54
55
A B C D E F G H I J K
1 DEVELOPMENT OF TORICONE
2 Formulae
3
4 Dimension Dl+2Rkl C2 [ mm ] 5280.00 | =Toricone!F17-2*Toricone!F18
5 Dimension Ds+2Rks+2ts C1 [ mm ] 4124.00 | =Toricone!F11+2*Toricone!F12+2*Toricone!F13
6 Dimension (cl-cs)/2 B [ mm ] 578.00 | =IF(F4<F5,(F5-F4)/2,(F4-F5)/2)
7 Half-apex Angle = tan-1(B/L) A [ ° ] 10.24 | =ATAN(F6/Toricone!F8)*180/PI()
8 (B^2+L^2)^0.5 E [ mm ] 3251.78 | =SQRT(F6^2+Toricone!F8^2)
9 Mean Knuckle Radius at Large End R2 [ mm ] 671.00 | =Toricone!F18+Toricone!F19/2
10 Mean Knuckle Radius at Small End R1 [ mm ] 351.00 | =Toricone!F12+Toricone!F13/2
11 R1+R2 J [ mm ] 1022.00 | =F9+F10
12 Angle B = sin-1(J/E) B [ ° ] 18.32 | =ASIN(F11/F8)*180/PI()
13 (E^2-J^2)^0.5 F [ mm ] 3087.01 | =SQRT(F8^2-F11^2)
14 T=A+B T [ ° ] 28.56 | =F7+F12
15 C1/2-R1.cos(T) L1 [ mm ] 1753.70 | =F5/2-F10*COS(F14*PI()/180)
16 C2/2+R2.cos(T) L2 [ mm ] 3229.37 | =F4/2+F9*COS(F14*PI()/180)

You might also like