Part A

Say True or False

1. The output of combinational circuit is depends only on present input combination.

2. The output of sequential circuit is depends only on present input combination.

3. The half adder circuit performs the addition of three bits.

4. The full adder circuit produces only single output that is SUM.

5. It is possible to perform subtraction with full adder circuit.

6. Addition of 2’s complement of the subtrahend with minuend results in subtraction.

7. It is possible to design single circuit for both adder and subtractor.

8. If there is carry while performing subtraction using 2’s complement addition then final answer
will be 2’s complement of the resulting addition.

9. The number of input variables and output variables are same in combinational circuit.

10. For X-NOR gate if the number of 1’s at input are odd then output is LOW.

11. A NOR gate output is LOW if any of its inputs is LOW.

12. If in a given expression the variable and it’s complements are said two different variables.

13. 1 ∙ 0 = 1. (here . means AND Operation)

14. In OR Gate if all the inputs are low then the output is high.

15. A NOR gate and an OR gate operate in exactly the same way.
Part B
1. Obtain the simplified expression in sum of products for the following Boolean function: a) xy
+ x’y’z’ + x’yz’
2. Obtain the simplified expression in sum of products for the following Boolean functions:A’B
+ BC’ + B’C’
3. Obtain the simplified expression in sum of products for the following Boolean functions:
a’b’ + bc + a’bc’
4. Obtain the simplified expression in sum of products for the following Boolean functions:
xy’z + xyz’ + x’yz
5. Convert the following sum-of-products Boolean expression into product-of-sums and vice
versa.
a) ( A + B + C’) ∙ ( A + B’+ C ) ∙ ( A’ + B + C) ∙ ( A’ + B’ + C’ )
6. Convert the following sum-of-products Boolean expression into product-of-sums and vice
versa.
A ∙ B + A’ ∙ B’
7. Convert the following sum-of-products Boolean expression into product-of-sums and vice
versa.
A’ ∙ B’∙C’ + A’ ∙ B ∙ C+ A ∙ B ∙ C’ + A ∙ B’ ∙ C
8. Obtain the simplified expression in sum of products for the following Boolean function: a)
x’y’z’ + x’yz’
9. Obtain the simplified expression in sum of products for the following Boolean functions:A’B
+ B’C’
10. Obtain the simplified expression in sum of products for the following Boolean functions:
a’b’ + a’bc’
11. Obtain the simplified expression in sum of products for the following Boolean functions:
xy’z + x’yz
12. Convert the following sum-of-products Boolean expression into product-of-sums and vice
versa.
a) ( A + B + C’) ∙ ( A + B’+ C ) ∙ ( A’ + B + C) ∙
13. Convert the following sum-of-products Boolean expression into product-of-sums and vice
versa.
A ∙ B. C + A’ ∙ B’
14. Convert the following sum-of-products Boolean expression into product-of-sums and vice
versa.
A’ ∙ B’∙C’ + A’ ∙ B ∙ C+ A ∙ B ∙ C’
15. Convert the following sum-of-products Boolean expression into product-of-sums and vice
versa.
A ∙ B + A’ ∙ B’ +C.A
Part C.
1. _______ & ________ are the Universal Gate.
2. NAND gate is also known as _______________ Gate.
3. The equality (A ∙ B ∙ C)’ = A’ + B’ + C’ is better known as ________________ Law.
4. _______,________ are the logic gates whose output entries are logic ‘1’ except for one entry
that is logic ‘o’.
5. The Boolean expression C + CD is equal to ________.
6. A half adder circuit has two inputs and _______________.
7. Which one of the following is odd?
a) Multiplexer b) Decoder c) Adder d) Flip-Flop
8. The output of full adder SUM is equal to _______________.
9. The output of a NOR gate is HIGH if ________.
10. The output of a NOT gate is HIGH when ________.
11. The Boolean expression for a 3-input AND gate is ________.
12. A _______________________ is needed when adder is used as subtractor.
13. DIFFERENCE = x’ ∙ y + x ∙ y’ and BORROW = _____________.
14. CARRY = x ∙ y and SUM = ______________________.
15. 2’s complement of 10000 is ________________.

Part D
1. _______ are the basic building blocks of combinational logic circuits.
2. ______ are the basic building blocks of sequential logic circuits.
3. The “D” in flip-flop stands for ________ or data.
4. f an active-HIGH S-R latch has a 0 on the S input and a 1 on the R input and then the R input
goes to 0, the latch will be ________.
5. On a J-K flip-flop, when is the flip-flop in a hold condition J = _____ , K = ______.
6. If an input is activated by a signal transition, it is ________.
7. For an S-R flip-flop to be set or reset, the respective input must be ________.S
8. Assume a J-K flip-flop has 1s on the J and K inputs. The next clock pulse will cause the
output to ________.
9. In synchronous systems, the exact times at which any output can change state are determined
by a signal commonly called the ________.
10. When the output of the NOR gate S-R flip-flop is Q = 0 and , the inputs are _____, ______.
11. . The technique used by one-shots to respond to an edge rather than a level is called
________.
12. A J-K flip-flop is reset and must stay reset after the clock pulse. This transition requires that
________.
13. The ________ counter in the Altera library has controls that allow it to count up or down,
and perform synchronous parallel load and asynchronous cascading.
14. A BCD counter has ________ states.
15. The decimal equivalent of the largest number that can be stored in a 4-bit binary counter is
________.

Part E
Which IC(Write IC Number) is used in following experiments.

1. Realization of parallel adder and subtractor can be done using ______ IC.
2. Realization of Mux can be done using ______ IC.
3. Realization of Demux can be done using ______ IC.
4. Realization of Half Adder and Full Adder Circuits can be achieved by_________IC.
5. Realization of Seven segment Display ( LED Display) using ___________.
6. Realization of priority encoder using active low input and output can be achieved by
__________
7. Realization of 3 Bit up/down counter can be done using ____________ IC.
8. Realization of Mod 10 and Mod 5 asynchronous counter using _________ IC.
9. Realization of Mod 16 and Mod 6 ripple counter using ________IC.
10. Realization of decade up/down synchronous counter using ____________ IC.
11. Realization of SIPO and SISO operation using ___________ IC.
12. Realization PIPO and PISO operation using __________ IC.
13. Realization of basic gates by which IC respectively(Write all the three).
14. Realization of universal gate by which IC (Write all the Two)
15. Write all the universal gates symbol.