0% found this document useful (0 votes)
3 views

smartctl-controller2

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
3 views

smartctl-controller2

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1127.13.1.el7.

x86_64] (local
build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===


Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs
Device Model: INTEL SSDSC2KG960G8
Serial Number: PHYG016200P5960CGN
LU WWN Device Id: 5 5cd2e4 152417f1a
Firmware Version: XCV10120
User Capacity: 960,197,124,096 bytes [960 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jun 27 07:44:22 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===


SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:


Offline data collection status: (0x03) Offline data collection activity
is in progress.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 64) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 144) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always -
0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always -
9452
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always -
35
170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always -
0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always -
0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always -
0
174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always -
27
175 Power_Loss_Cap_Test 0x0033 001 001 010 Pre-fail Always
FAILING_NOW 2498 (35 65535)
183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always -
0
184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always -
0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always -
0
190 Drive_Temperature 0x0022 082 073 000 Old_age Always -
18 (Min/Max 13/28)
192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always -
27
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always -
18
197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always -
0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always -
0
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always -
578956
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always -
327
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always -
9
228 Workload_Minutes 0x0032 100 100 000 Old_age Always -
567027
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always -
0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always -
0
234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always -
0/0
235 Power_Loss_Cap_Test 0x0033 001 001 010 Pre-fail Always
FAILING_NOW 2498 (35 65535)
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always -
578956
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always -
63760
243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always -
1351844
SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1


Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed: unknown failure 00% 9451 0
# 2 Short offline Completed: unknown failure 00% 3501 0

SMART Selective self-test log data structure revision number 1


SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

You might also like