Scribd
Upload
8 views

Electromagnetic Concepts Report

Uploaded by

Muhammad Naeem
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
8 views

Electromagnetic Concepts Report

Uploaded by

Muhammad Naeem
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Detailed Report on Electromagnetic Concepts

Ampere’s Law

Ampere's Law relates magnetic fields to the electric current that produces them. It states:
∮ B · dl = μ₀ Iₑₙc
Explanation:
- B: The magnetic field vector.
- dl: A small segment of the closed loop.
- μ₀: Permeability of free space (4π × 10⁻⁷ T·m/A).
- Iₑₙc: Current enclosed by the loop.

Applications:
Ampere’s Law is used to calculate the magnetic field for symmetrical configurations like
straight wires, solenoids, and toroids.

Current-Produced Magnetic Fields

When a current flows through a conductor, it generates a magnetic field around it.
- The direction of the magnetic field follows the Right-Hand Rule: Point your thumb in the
direction of the current, and your fingers curl in the direction of the magnetic field.
- The magnetic field strength depends on the distance from the wire and the current
magnitude.

Example (for a straight wire):


Magnetic field at a distance r from a long straight wire:
B = μ₀ I / (2π r)

The Biot-Savart Law

The Biot-Savart Law gives the magnetic field produced at a point by a small current
element. It is expressed as:
dB = (μ₀ / 4π) * (I dl × r̂ ) / r²
Explanation:
- I: Current in the conductor.
- dl: Small segment of the conductor.
- r̂: Unit vector pointing from dl to the observation point.
- r: Distance between dl and the point of observation.

Applications:
Used to calculate the magnetic field of current-carrying wires and coils, especially when the
geometry is not simple.

Solenoids and Toroids

Solenoid:
A long coil of wire with many turns. It produces a nearly uniform magnetic field inside when
current flows through it.
B = μ₀ n I
- n: Number of turns per unit length (n = N/L).
- I: Current through the coil.

Toroid:
A solenoid bent into a circular shape, forming a doughnut-like structure.
B = (μ₀ N I) / (2π r)
- N: Total number of turns.
- r: Radius of the toroid.

Applications:
- Solenoids are used in electromagnets and inductors.
- Toroids are used in transformers and inductors with minimal external magnetic fields.

A Current-Carrying Coil as a Magnetic Inductor

When a current passes through a coil, it creates a magnetic field proportional to the current.
This magnetic field induces a magnetic flux within the coil.

𝓔 = -L (dI/dt)
The coil resists changes in current due to self-induction, described by:

- L: Inductance of the coil.

Applications:
Inductors in electrical circuits store energy in their magnetic fields and oppose changes in
current.

Faraday’s Experiments

Michael Faraday discovered electromagnetic induction through experiments:


- When a magnetic field through a coil changes, a current is induced in the coil.
- Faraday showed that moving a magnet relative to a coil or varying the current in one coil
induces a current in a nearby coil.
Key Observations:
- A change in magnetic flux induces an electromotive force (EMF).
- Faster changes produce higher EMF.

Faraday’s Law of Induction

𝓔 = -dΦB/dt
Faraday’s Law states:

- 𝓔: Induced EMF.
Explanation:

- ΦB = B · A: Magnetic flux, where B is the magnetic field, and A is the area perpendicular to
the field.

Applications:
Used in generators, transformers, and induction cooktops.

Lenz’s Law

Lenz’s Law describes the direction of the induced EMF and current:
- The induced current opposes the change in magnetic flux that caused it.
- Mathematically, this is the negative sign in Faraday’s Law.

Explanation:
If the magnetic flux increases, the induced current generates a magnetic field opposing the
increase. If the flux decreases, the current supports the flux.

Applications:
Used in electromagnetic braking, electric motors, and induction heating.

You might also like