Scribd
Upload
37 views3 pages

Nous Smart WiFi Switch L6

Nous Technology Smart WiFi Switch L6 - INSTRUCTION MANUAL

Uploaded by

qenzoid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views3 pages

Nous Smart WiFi Switch L6

Nous Technology Smart WiFi Switch L6 - INSTRUCTION MANUAL

Uploaded by

qenzoid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

INSTRUCTION MANUAL

Smart WiFi Switch L6

You will need Nous Smart Home App. Scan the QR code or download it from direct link

Checklist before using the device:


Your smart phone or tablet has connected to a 2.4G WiFi with internet.
You have the correct WiFi PWD
Your smart phone or tablet must have access to App Store Google Play.
Your router is MAC-open

User Guide
Start with "Nous Smart Home" APP.
Register an Nous Smart Home If your have Nous Smart Home just log in.
Power on
ON/OFF operating principle: The connected appliances work/stop throught live wire power
on/off.

Appliance wiring instruction

Celling lamp wiring instruction

1
One wire wiring instruction

Note: The WiFi Switch must be powered up by N and L wires

Press and hold the button for about 7 seconds until the WiFi green LED blinks fast.

Enter the App, tap "+" in the upper right of the page to enter network connection page.
There are two network connection methods(Normal mode and AP mode). Normal mode is
default. Users could tap the upper right corner to switch the connection method to AP mode.
Please make sure the device'sindicator light rapidly flashes (2 times per second), tap to go on
to the next step.
If indicator light is not rapidly flashing, tap "how to set indicator light as rapid flashes" to view
operation processes.
Input your WiFi password.
Name your device.
The device is online.

Troubleshooting
Q1: How to set indicator light as rapid flashing?

Power on device. Power off after 10s and then power on.


Hold the reset button for 5s.
Confirm indicator light is now rapidlyflashing

Q2: How to set indicator light as slow flashing?

2
Power on device. Power off after 10s and then power on.
Hold the reset button for 5s
Confirm indicator light is now rapidly flashing.
Hold reset button for 5s until indicator light is slowly flashing.

The new added device needs 1min to connect to WiFi and the internet if it stays offline for a long time
please judge the problem by the WiFi LED status. WiFi LED quickly blinks one time every second; WiFi
Switch failed to connect to your WiFi.
1) Maybe you have entered wrong WiFi password.
2) WiFi Switch is too far away from your WiFi. Please hold it closer.
3) Make sure your router is MAC-open. If still failed, try to open a mobile hot spot and add again.

* This translation may be inaccurate because it was made with google translate service

You might also like