HWDP 55 10
HWDP 55 10
5-1/2" OD Heavy-Weight Drill Pipe, 4145, 5-1/2" FH DSTJ Conn's. New Premium
80% remaining Body Wall
DESCRIPTION
Type AISI-4145, 47.81#
Range 2
Conventional=welded T-J. / Integral=Monoblock Integral
TUBE DATA
Material grade AISI-4145H (110 ksi)
Internal plastic coating TK-34P / TC-2000
Tube body OD x ID inch 5,500 3,500 5,100 3,500
Wall thickness, nominal inch 1,000 0,800
Cross Sectional Area inch2 14,137 10,807
Polar Sectional Modulus inch3 27,310 20,269
Ibf 1 555 100 1 188 800
Tensile yield pipe
kN 6 917 5 288
lbf-ft 144 450 107 210
Torsional yield pipe
kNm 195,8 145,4
lbf-ft 115 560 85 768
80% Torsional Yield
kNm 156,7 116,3
CONNECTION DATA
Connection type 5-1/2" FH. DSTJ
Stress Relief Grooves NA
Material grade AISI-4145H (110 ksi)
Hardbanding Arnco-300XT / TCS-Titanium
OD x ID inch 7,000 3,500 6,719 3,500
B.S.R. x:1 2,29 1,64
lbf 1 464 800 950 200
Tensile yield tooljoint
kN 6 516 4 227
lbf-ft 84 380 57 850
Torsional yield tooljoint
kNm 114,4 78,4
lbf-ft 59 100 40 500
Make up torque Maximum
kNm 80,1 54,9
OPERATIONAL DATA
Tool joint/Drill pipe torsional ratio 0,58 0,79
Drift diameter inch 3,375
Type of elevator shoulder: 18°
psi 35 000 32 000
Burst pressure
Mpa 241 221
psi 32 730 29 100
Collapse pressure
MPa 226 201
lbs/ft 56,85
Adjusted weight
kg/mtr 84,6
lbs 1 762
Approx weight each joint
kg 799
gal/ft 0,501
Capacity
ltr/mtr 6,22
Open end displacement gal/ft 0,87
ltr/mtr 10,80
gal/ft 1,37
Closed end displacement
ltr/mtr 17,03
Built In Length (shoulder to shoulder) ft 31,0
mtr 9,45
Calculated using nominal OD & ID. Safety & Dope friction factor used: 1.0
Values herein is meant as guidelines only. Odfjell will not be held liable for any damage or injuries !