Item Amount

Description Unit Quantity Rate (UGX)

(UGX)
MAIN HOSPITAL BLOCK INTERNAL
AND EXTERNAL WIRING AND
FITTINGS

LIGHTING

Samples to be presented to the Engineer for

approval

A 20W, 1200mm, Utra slim Decorative led

battern with extruded Aluminium heat sink,
anti glare diffuser with energy efficient No 157 115,000 18,055,000
electronic driver as panasonic
ALF2480220042 (LIGHT TYPE FI)

B Ditto but double No 33 132,250 4,364,250

C
Fresh and contemporary circular luminaire
with 1200lm (15W) LED or 16W TC-DDEL
compact fluorescent lamps with
No 76 138,000 10,488,000
polycarbonate body and opal diffuser As
Thorn Loire. (Light Type A)

Total carried to collection 32,907,250

G/ELE/1
Item Amount
Description Unit Quantity Rate (UGX)
(UGX)
WIRING ACCESSORIES
F
6A/240V SP 1-Gang 1-Way plate switches
No 100 14,375 1,437,500
c/w flush mounting box, and accessories.

G Ditto but 2-Gang 1-Way. No 15 17,250 258,750

H Ditto but 1-Gang 2-Way. No 50 28,750 1,437,500

J 13A SP 2-Gang switched socket outlet for

trunking-mounting c/w 2-Gang accessory
box, as to MARSHALL TUFFLEX Ref. No 30 48,875 1,466,250
Nos. ESS3 + ESSB2, or approved
equivalent.
K Allow for trunking - mounted MK boxes (to
be used for Data/Voice Outlets) as to No 30 17,250 517,500
MARSHALL TUFFLEX manufacture.

L 13A SP 2-Gang switched socket outlet for

Wall mounting c/w 2-Gang MK box, as to
No 123 28,750 3,536,250
MARSHALL TUFFLEX Ref. Nos. ESS3 +
ESSB2, or approved equivalent.

M 20A/250V DP plate switch complete with

flush mounting box, and fitted with red LED No 7 57,500 402,500
indicator lamp.

A 45A/250V cookery control unit complete

with flush mounting box, and fitted with red No 4 115,000 460,000
LED indicator lamp.

B 45A/250V cookery connnector No 4 57,500 230,000

C WIRE with coaxia cable for Screened TV +

FM + satellite, ‘F’ type Outlet, complete
No 3 138,000 414,000
with flush mounting box, and accessories.
As Legrande Synergy Cat. No. 7334 43.

Profile 201, 220mm x 65mm, 3-

Compartment prestige skirting and DADO
trunking (for data, telephone and power
socket outlets), complete with all necessary
accessories such as couplers, end caps, LM 60 103,500 6,210,000
internal bends, external bends, flat angles,
flat tees, e.t.c.; all as to MARSHALL-
TUFFLEX manufacture, or approved
equivalent. Note: Provisional route length
stated, actual measurements to be done on
site]
Fixed Equipment
F 2.3kW/240V Stainless Steel "No-Touch"
hand drier, earthed Class 1 shock protection,
motor type 2700 rpm brushless external
rotor, low-noise fan with noise level of
65dBA @ 1 meter cut-outs, as to No 2 483,000 966,000
HEATRAE SADIA or approved equivalent.

Total carried to collection 17,336,250

G/ELE-2
Item Amount
Description Unit QTY Rate (UGX)
(UGX)
WIRING
Lighting Points

A All wiring of lighting points are to be

connected complete and ready from 10A SP
miniature circuit breakers of respective No 266 1,667,500 443,555,000
Distribution Boards, using 1.5mm sq. PVC-
Insulated single core copper cables drawn in
Power points:

B All wiring of all power points are to be

connected complete and ready from 32A SP
miniature circuit breakers of respective No 153 28,750 4,398,750
Distribution Board, using 2.5mm sq. PVC-
Insulated single core copper cables in ring
Hand Drier Point:

C All wiring of hand drier points are to be

connected complete and ready from 20A SP
miniature circuit breakers of the respective
No 2 172,500 345,000
distribution boards using 2.5mm sq. PVC-
Insulated single core copper cables, drawn
in uPVC flush installed conduits through
20A
Water DPHeater
controlPoint:
switch, as per drawings.

D All wiring of water heater point are to be

connected complete and ready from 20A SP
miniature circuit breakers of the respective No 4 230,000 920,000
Distribution Board using 2.5mm sq. PVC-
Insulated single core copper cables, drawn
in uPVC flush installed conduits through
Air Conditioning Fan Coil Unit Points

E All wiring of air conditioning fan coil unit

points to be connected complete and ready
from 20A SP miniature circuit breakers of No 3 172,500 517,500
the respective distribution boards using
2.5mm sq. PVC-Insulated single core
copper cables,
Total carried drawn in uPVC flush
to collection 449,736,250
G/ELE-3
Item Amount
Description Unit Quantity Rate (UGX)
(UGX)

Theatre lighting

A Ceiling mounted theatre lighting in

accordance with the particular specifications No 3 13,800,000 41,400,000

B Mobile theatre lighting in accordance with

the particular specifications No 3 19,550,000 58,650,000

Total carried to collection 100,050,000

G/ELE-4

From Page ELE-1 32,907,250

From Page ELE-2 17,336,250

From Page ELE-3 449,736,250

From Page ELE-4 100,050,000

Total carried to collection 600,029,750
G/ELE-5
Item Description UnitQuantityRate (UGX) Amount (UGX)
MAIN HOSPITAL BLOCK
INTERNAL AND EXTERNAL
WIRING AND FITTINGS
FIRE ALARM SYSTEM
Provide all materials, install, connect
and set to work the following all as
described in the Specifications and
Drawings.
Using the quantities below as a basis, the
Contractor shall provide a Solution that
offers an integrated system combining
Access Control, CCTV, Public Address
and Evacuation, and Fire Detection and
Alarms all under the control of the
Integrated Building System. These
systems shall be integrated to run on the
main Voice and Data Network.

All communication cables shall be cat 6E

or better and shall be capable of data rates
of 100GB. Similarly all system
components shall be ready for 100GB
operation.

Main Fire Alarm Control Panel,

Addressable, 2-Loop as MENVIER, or
equal approved. NO 1 13,800,000 13,800,000
DF6400 - 125 Addresses per Loop. Total
Addresses = 375

Repeater Fire Alarm Panel for the 3-Loop

Panel above NO 1 6,900,000 6,900,000

Photoelectric Smoke Detector

(Addressable) c/w Base NO 66 322,000 21,252,000

Fixed Temperature / Rate-of-Rise Heat

Detector (Addressable) c/w Base NO 4 322,000 1,288,000

Manual Break Glass Unit (Addressable)

all complete NO 2 287,500 575,000

Fire Sounder Siren all complete NO 2 345,000 690,000

Fire Alarm Speaker/Strobe (0.5 watt) as

GCF-S7VM NO 2 368,000 736,000
Fire Strobe all complete NO 2 402,500 805,000

Fire Alarm short circuit Isolator NO 4 862,500 3,450,000

Control Relay Module to interface with

Air Conditioning and Ventilation System, NO 1 920,000 920,000
etc.

Wiring
Fire Detection and Alarm Points wired in
fire retardant cable 2-core 1.5mm2 NO 76 97,750 7,429,000
complete with all accessories.
Programming:
Programming, Testing, Commissioning,
start-up and Handover LS 1 1,725,000 1,725,000
Total collection 59,570,000
T/ELE-5
 Rate Amount
Item Description Unit Quantity
(UGX) (UGX)
MAIN HOSPITAL BLOCK INTERNAL
AND EXTERNAL WIRING AND
FITTINGS

CENTRALISED TELEVISION SYSTEM

NOTE:

Allow a for supply and installation of the

DSTV/UHF/VHF Television System per
A Block that shall include but not limited to the LS 1 9,200,000 9,200,000
following items: The rate shall also include 5
Decoders and 6 month subscription.

i) DSTV Dish and connection

ii) VHF / UHF Antenna
Connection to all TV outlets using TV co-
iii) axial cables, as per Drawings
Splitters, Amplifier and UPS Backup power
iv) supply
Sundry Items necessary for successful
v) Installations
Testing and Commissioning to the
vi) Satisfaction of the Engineer
21 Flat Screen TV Units to LG/Sony/Philips
vii) Manufacture (3No.)
 9,200,000
T/ELE-8
 Rate
Item Description Unit Quantity Amount (UGX)
(UGX)
MAIN HOSPITAL BLOCK INTERNAL
AND EXTERNAL WIRING AND
FITTINGS

Rate
Item Description Unit Quantity Amount (UGX)
(UGX)
LIGHTNING PROTECTION SCHEME
& BUILDING GROUNDING

All items are to be supplied and installed

complete with all the required mounting,
fixing, clipping, testing, connecting
accessories, connected, tested and
commissioned to the satisfaction of the
Electrical Engineer.

25mm x 3mm copper tape as to FURSE

A manufacture, or approved equivalent. Ground LM 108 82,800 8,942,400
Ring Tape omitted.
25mm x 3mm copper square test clamp, as to
B FURSE Cat. No. CT 105, or approved NO 2 115,000 230,000
equivalent.
2000mm x 15mm air rod, as to FURSE Cat.
No. RA 240 c/w multiple point, as to FURSE
Cat. No. RA 600, air terminal base, as to
C FURSE Cat. No. SD 105, and ridge saddle, as NO 2 644,000 1,288,000
to FURSE Cat. No. SD 115, or approved
equivalent.

1200mm x 20mm solid copper earth rod, as to

D FURSE Cat. No. RC 015, complete with NO 4 644,000 2,576,000
driving stud and coupler, and accessories.
Concrete inspection chamber, as to FURSE
E Cat. No. PT005 or approved equivalent. NO 2 402,500 805,000
 13,841,400
T/ELE-10
 Rate
Item Description Unit Quantity Amount (UGX)
(UGX)
MAIN HOSPITAL BLOCK INTERNAL
AND EXTERNAL WIRING AND
FITTINGS

EXTERNAL LIGHTING
INSTALLATIONS

Stylish post top luminaire with UV

stabilised, impact resistant clear bowl with
black outer top cover, glass fibre reinforced
polyamide pole mount and gear cover in
black colour for SON-T 250W, sandblasted
die-cast aluminium louvre and pre-
galvanised steel heat shield suitable for post-
A top 60mm outside diameter poles, all to NO 26 1,725,000 44,850,000
PHILLIPS Urban Lighting Tropic Cat. No.
GPS309 PCC-R, or approved equivalent.
The rate includes a 4m galvanised pole with
base firmly bolted in concrete base.

6mm sq. 4Core XLPE/SWA/PVC Copper

cables enclosed suitably sized PVC ducts in
C trenches for connection of the outdoor LM 600 34500 20,700,000
lighting fittings (Provisional Length)

2.5mm sq. 3Core Flexible PVC Copper

cables enclosed suitably within the pole for
D connection to the lamp fittings (Provisional LM 120 27600 3,312,000
Length)

24-Hour programme time switch c/w 150-

E Hour back-up battery, as to Legrand NO 1 425500 425,500
manufacture, or approved equivalent.

32A 4-Pole Contactor to Crabtree / ABB

F manufactuure complete with enclosure NO 1 517500 517,500

G PVC Enclosure for items E and F above NO 1 425500 425,500

 Allow for sandry items for the successful
installation, cable manholes, earthing of the
H lighting collumns, connectors, testing and ITEM 1 1,725,000 1,725,000
commissioning of the external lighting
system.

71,955,500
T/ELE-11
 Rate
Item Description Unit Quantity Amount (UGX)
(UGX)
MAIN HOSPITAL BLOCK INTERNAL
AND EXTERNAL WIRING AND
FITTINGS

VOICE AND DATA (ICT)

INSTALLATION

A Allow provision sum for the Voice and

Data System Installation to include but not
limited to the following items and to item 1 10,350,000 10,350,000
PANASONIC Manufacture or approved
equivalent:

i) Digital Hybrid PABX System capable of

handling Incoming Lines and Extensions.
ii) Main Distribution Frame
iii) Patch Panel Cabinet c/w all accessories
iv) Wireless Network Points c/w power supply
units
v) System Outlets
vi) Optical fibre backbone and Cat 6 cable
wiring to be contained in flush conduits and
all accessories
vii) A utility Service Provider incoming line
and accessories
viii) Saundry Items and Equipment.
ix) UPS Backup power supply system
x) All to Approval of the Supervising
Engineer prior to purchase and installation
10,350,000
 Rate
Item Description Unit Quantity Amount (UGX)
(UGX)
MAIN HOSPITAL BLOCK
INTERNAL AND EXTERNAL
WIRING AND FITTINGS
CCTV SYSTEM
Provide all materials, install, connect
and set to work the following all as
described in the Specifications and
Drawings.
Using the quantities below as a basis, the
Contractor shall provide a Solution that
offers an integrated system combining
Access Control, CCTV, Public Address
and Evacuation, and Fire Detection and
Alarms all under the control of the
Integrated Building System. These
systems shall be integrated to run on the
main Voice and Data Network.

All communication cables shall be cat 6E

or better and shall be capable of data
rates of 100GB. Similarly all system
components shall be ready for 100GB
operation.

CCTV
IMPORTANT NOTE: System (Network
Video Recorder NVR, Computer and
Software, Racks, Monitors etc. to be
supplied by and installed by others).

IP DOME CAMERA: Indoor, Full HD, NO 4 2,300,000 9,200,000

2MP resolution, 1080P, 2.8-12mm Lens,
IR 25-30meters, IP66, PoE complete with
all accessories.
IP DOME CAMERA: Weatherproof, NO 8 1,380,000 11,040,000
Vandal IR Dome camera, Full HD, 2MP
resolution, 1080P, 2.8-12mm Lens, IR 25-
30meters, IP66, PoE complete with all
accessories.

42" LED Screen NO 2 2,990,000 5,980,000

PC based Camera controller/multiplexer NO 1 5,750,000 5,750,000
system with the 32 Channel card and 2 IP
streaming ports, 2000GB Storage,
complete with all functions and
accessories.
 19" LCD VGA PC flat panel display NO 1 920,000 920,000
colour monitor, 1280x1024 + picture in
picture, 120/230VAC 50/60Hz, and all
accessories.
Universal Switch Mode Power Supply ITE 1 2,875,000 2,875,000
Unit, 230VAC 50Hz, Output 12V/24V DC, M
5A.
Associated recording/playback/viewing ITE 1 6,900,000 6,900,000
software. M
Testing and documentation. ITE 1 1,150,000 1,150,000
M
CCTV SYSTEM WIRING
CCTV points wired in CAT 6E cables in NO 12 138,000 1,656,000
concealed conduit/trunking complete with
outlets and all accessories.

45,471,000

Rate
Item Description Unit Quantity Amount (UGX)
(UGX)
45,471,000
240V (UPS) Power outlet for CCTV NO 12 138,000 1,656,000
camera wired by 2.5mm2 power cables in
concealed conduit/trunking complete with
outlets and all accessories.
Siemon Twin RJ45 outlets for UTP CAT NO 12 57,500 690,000
6E, as Siemon or equal approved, mounted
on wall or trunking complete with all
accessories.

47,817,000
Item Description Unit Quantity Rate (UGX) Amount (UGX)
ALL SPECIFIED MATERIALS -
GENERAL NOTES
A To be supplied, delivered to Site,
installed, connected complete and
commissioned in full working condition
including all the necessary
fixing/mounting/terminting accessories as
per Specification and Drawings, tested
and commissioned to the satisfaction of
the Electrical Engineer.

B All electrical items to be suitable for

415/240V power system.

C All power supply cables and power line

construction materials measured under
this Bills of Quantities are provisional.
Actual measurements will be done on site
during evaluation.

D All underground reticulation and

distribution cables are to be supplied and
installed c/w all necessary fixing /
clipping / supporting / termination
accessories as per general specification
and type approved by the supervising
Electrical Consultant.

E The rate for the underground cables shall

cover excavation, sand-bedding,
backfilling, trenching, enclosing in PVC
ducts, etc and all manholes, where
necessary, and all associated builders'
works. Actual measurements shall be
based on the site conditions.

F All indoor cables are to be recessed

within the wall fabric and are to be
enclosed in suitably sized PVC conduits
neatly installed and to further Instructions
from the Electrical Engineer.
 G All lightings fittings shall be as per
Drawings with control gear compartible
with 240V/50Hz. All lighting fittings are
to be approved prior to installation, by the
Engineer.

H All wiring accessories to be of flush

mounting and approved original
ABB/Crabtree/MEM/Chint/Clipsal
manufacture. The items are to be
complete with all necessary fixing,
mounting accessories and mk boxes.
Samples to be approved prior to
installation by the Engineer.

I The entire electrical installation shall be

tested for compliance in accordance to the
16th Edition of the IEE Wiring
Regulations and witnessed / approved by
the Engineer

Total carried to collection

Item Description Unit Quantity Rate (UGX) Amount (UGX)

Item Description Unit Quantity Rate (UGX) Amount (UGX)

Umeme connection

Allow a P.C sum of UGX5,000,000 for

for direct inputs by them regarding their
denergenising and reenergising the supply
line at the beginning and compretion of
D the works respectively, capital Ls 1 5,750,000 5,750,000
contribution, energy loss, HV metering
and energy deposit

E Attendence and profit on item E above % 10 661,250 575,000

Sub-station: The unit of measure shall

comprise the supply, delivery, and
installation of the specified equipment
inclusive of all necessary accessories for
F the operation of a 630KVA 33KV/433V
ground mounted sub-station, complete
with autocloser
 Transformer concrete plinth to M/S
G Umeme Ltd. Standards Ls 1 1,725,000 1,725,000

200KVA B7415V 50Hz transformer to

H M/S Umeme Ltd. Standards No 1 19,550,000 19,550,000

250A, Low Voltage TPN Main

Distribution Board (MDB), Blokset,
J Type-Tested , to be supplied and installed No 1 11,500,000 11,500,000
in the Electrical Load Centre, complete
with
Totalall- Grid
accessories:
electricty supply carried to
summary 39,100,000

Item Description Unit Quantity Rate (UGX) Amount (UGX)

STANDBY POWER SUPPLY AND
ACCESSORIES
Stanby power is planned for the entire
load to be provided by 200KVA
supplying all loads .
Supply and Install 200kVA, 3-Phase,
415/240V, 50Hz, Diesel Engine Standby
Generator Set c/w Control Panel with
Digital Display, instrumentation, hours
run recorder, fuel base tank for 8 hour
operation, weatherproof and soundproof
A attentuated canopy, attachments and ITEM 1 51,750,000 51,750,000
accessories all to approved Caterpillar /
Cummins Manufacture. The rate shall
include the following:

i) Improved exhaust and silencing system

ii) Original manufacturer's Installation,
Operation and Maintenance Manuals
iii) External exhaust management systems
vi) Emergency stop button mounted on
enclosure exterior
v) Output MCCB
vi) Automatic fuel transfer systems
vii) Digital Voltage Regulator
viii) Warranty for atleast one year
ix) Standard Spare Parts for 2500 hour
running.
 250A/415V Automatic Load Transfer
Panel c/w 250A ACB Incomers, 250A
B ACB Outgoer, controls, instrumentation, ITEM 1 14,950,000 14,950,000
and all accessories to approved
equivalent.

Earth the Generator Set as per Code of

Practice and IEE Regulations, as to
C achieve an earth resistance value of not ITEM 1 1,150,000 1,150,000
more than 1.0 ohm.

POWER BACK UP
Power back up (UPS) is planned for for
D 0nly those areas that are very critical ITEM 1 28,750,000 28,750,000
as will be advised by the client .

SYSTEM EARTHING:
Earth the following as per Code of
Practice and IEE Regulations, as to
achieve an earth resistance value of not
more than 1.0 ohm. The rate should
E include cable, earth termination bar, earth ITEM 1 4,600,000 4,600,000
matt, copper electodes in concrete
manholes with cover and earthing
conductorss.

i) Incoming LV services
ii) Automatic mains failure load transfer
panel
iii) Voltage stabiliser
iv) Main and sub-main LV switchgear
TOTAL COLLECTION CARRIED
FORWARD 101,200,000

Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL COLLECTION BROUGHT
DOWN 101,200,000

INSPECTION / TESTING &

COMMISSIONING:
Allow for all costs for the Consultant to
inspect and witness all tests for the power
supply and, standby power equipment as
per specification, at the manufacturer's ITEM 1 57,500,000 57,500,000
premises before shipment.
 T0TAL COLLECTION CARRIED TO SUMMARY 158,700,000

Item Description Unit Quantity Rate (UGX) Amount (UGX)

Main LV Power Reticulation Cabling:
The unit of measure shall comprise the
supply, delivery, proper storage and
erection of a single unit of specified
conductor or termination equipment

33kV 70mm sq. 3Core XLPE-SWA-PVC

A Copper cable for connection of all HV Lm 25 262,200 6,555,000
Equipment.

95mm2 XLPE/SWA/PVC copper cable in

B trench from transformer toMDB in Lm 30 874,000 26,220,000
accoradance with the drawings.

95mm2 XLPE/SWA/PVC copper cable in

trench from generator to main distribution
C board MDB in accordance with the Lm 25 874,000 21,850,000
drawings.

5x16mm2 XLPE/PVC copper cable 0n a

cable tray from mains to distribution
D board MDB in accordance with the Lm 30 131,100 3,933,000
drawings - To medicla gases plant

TOTAL COLLECTION CARRIED FORWARD 58,558,000

Item Description Unit Quantity Rate (UGX) Amount (UGX)

58,558,000

Cable trays
Supply 100mm x 100 mm wide cable
ladder complete with bends, tees and all
B accessories necessary for a complete LM 50 249,090 12,454,500
installation as specified and detailed on
the drawing
Allow for installation of the above cable
LM 50 58,558 2,927,900
tray
 Supply and Install brackets for above
No. 25 131,100 3,277,500
ladder

Supply of 100mm x 50mm wide cable

tray complete with bends, tees and all
C accessories necessary for a complete LM 110 218,500 24,035,000
installation as specified and detailed on
the drawing

TOTAL COLLECTION CARRIED FORWARD 101,252,900

TOTAL COLLECTION 299,052,900

299,052,900
Item Description Unit QuantityRate (UGX) Amount (UGX)

Total collection for lighting & smallpower

600,029,750
Ground floor

Total collection for Fire alarm system 59,570,000

Total collection for Centralised system 9,200,000

13,841,400
Total collection for Lightinening protection

Total collection for External lighting 71,955,500

Total collection for Voice & Data 10,350,000

Total collection for CCTV CAMERAS 47,817,000

Total collection for Power Reticulation 299052900

TOTAL COLLECTION CARRIED TO SUMMARY 1,111,816,550

Item Description Unit Quantity Rate (UGX) Amount (UGX)

The Contractor shall supply, deliver,

install, test and commission to the
satisfaction of the Engineer the following
including builders works.The Tenderers
must allow in their prices for all
couplings, connectors as required in the
running lengths of pipes

WATER SUPPLY, PUMPING AND

STORAGE
Excavate trench 0.6m wide and maximum
A 1m deep, back fill , ram and cart away M 50 33,000 1,650,000
excess soil for accomodation of NWSC
water supply pipework

B 50mm diameter HDPE water supply pipe M 60 33,000 1,980,000

Braithwaite pressed steel (GI) cold water

storage tank on steel stand 5m high to BS
1564:type 1 size 3000 x 3000 x 3500mm
high capacity 40,000 litres Tank to be
complete with access manhole, with hinged
cover; internal and external ladders, filtered
vent; dome shaped water proof and dust
proof cover jointed throughout the tank top
with non-toxic material, inflow and outflow
connections as shown on the drawing.
C Tank plates and all accessories to be deep No 1 24,200,000 24,200,000
galvanised after manufacture and before
erection. Tank inside shall be painted two
coats of bituminous paint on approved
etching primer while the outside shall be
painted two coats of alumnium or equal and
approved paint on approved etching primer
after erection.

Water Supply
Distribution Pipework 0
M 50mm PN16 HDPE pipework for m 80 30,500 2,440,000
distrbution complete with all accessories.
N 32mm PN10 HDPE pipework for m 120 12,100 1,452,000
distrbution complete with all accessories.
N 25mm PN10 HDPE pipework for m 55 6,500 357,500
distrbution complete with all accessories.
P 32mm gate valves as Peglar heavy duty or No. 4 96,800 387,200
equal approved.
P 50mm gate valves as Peglar heavy duty or No. 3 118,000 354,000
equal approved.

TOTAL COLLECTION CARRIED 32,820,700

FORWARD
MECHN-1
Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL COLLECTION CARRIED 32,820,700

DOWN
Valves
Approved high pressure screw - down full
way non-rising stem wedge gate valve to
A BS 1952 with wheel head and joints to steel
tubing

B 50mm diameter gate valve No 2 60,500 121,000

C 50mm diameter non-return No 2 66,000 132,000

Allow for testing the whole of the internal

D water supply pipe installation to 200 psi to Item 1 2,200,000 2,200,000
the satisfaction of the Engineer.
Item Description Unit Quantity Rate (UGX) Amount (UGX)

INTERNAL WATER SUPPLY AND

DISTRIBUTION
All Cold and Hot Water piping shall be
PPR pipe PN25.Complete with
Tees,Sockets,Elbows,Threaded adapters,
Threaded elbows, Reducers and all
associated fittings.

Internal Plumbing (Cold Water Supply)

GROUND FLOOR
B 25mm diameter PPR PN25 pipe LM 100 8,250 825,000

C 20mm diameter ditto LM 109 5,280 575,520

D 15mm diameter ditto LM 65 3,300 214,500

Gate valves as Peglar heavy duty or equal

approved.
D 20mm NO 84 23,650 1,986,600

E 25mm NO 20 36,300 726,000

15mm NO 15 19,800 297,000

G 15mm(1/2") flexible tubing 450mm long NO 149 38,500 5,736,500

15mm angle valves as Pex England Grohe

H or equal and approved NO 149 38,500 5,736,500

18,550,620
MECHN-9
Item Description Unit Quantity Rate (UGX) Amount (UGX)

Sanitary Ware
Supply assemble and fix the following
sanitary fittings to the Engineer's
approval including all joints to service,
overflow, soil and waste pipes, jointing
materials cutting and pinning brackets,
plugging and screwing, building in,
cutting or forming mortises and holes
and making goods as necessary.

A Vitreous China white Wall hung WC as

Jaquar OPS-WHT-15951,, flush valve
regular 32mm size as FLV-CHR -1029
bottom supply and interanl flow, seat &
cover, domex screws, seat & cover metal
screws, panekta outlet connector, finned NO 15 1,595,000 23,925,000
pattern to convert horizontal outlet WCs to
P trap or S trap, screws for fixing WC to
floor and , to wall and all accessories.

WC Squatting pan as Jaquar model SBE

Squat pan
manufactured from 1.2mm gauge
grade 304(18/10) Stainlessraised pattern on
both sides of and infront of the flush bow
NO 12 880,000 10,560,000
land 20mm horizontal grouting key on all
four sides and flushbowl pressed into one
piece. Complete with a rear entryflushing
spreader with self sealing mechanism for
flushpipe,110mm external waste
outlet,brackets,flexible hose,inlet
connector,rubber,flush pipe and clips..

E Fiorentine single lever handle without

Popup waste with 375mm long braided
Hoses as FLR-CHR-5033B oval counter top
wash hand basin of proprietary manufacture
model complete with 15mm chrome plated NO 28 880,000 24,640,000
elbow action taps and 32mm chrome plated
chain waste fitting with back nut.

TOTAL COLLECTION CARRIED

FORWARD 59,125,000
MECHN-9
Item Description Unit Quantity Rate (UGX) Amount (UGX)
TOTAL COLLECTION CARRIED
DOWN 59,125,000

C Plaster sink in 18 guage polished stainless

steel sheet with integral brackets, bucket
grating strainer basket, lid 32mm vulcanite
standing tube, combined waste ,ovewrflow
and connecting pipe, 25mm wall mounted NO 1 550,000 550,000
mixer with swivel nozzle, ant-splash outlet,
concealed inlet and compression nuts

F Stainless steel plate mirror size 610x475mm

complete. NO 5 82,500 412,500

G Soap dish as Vado Eclipse ECL-182-C/P NO 10 93,500 935,000

Soap Dispenser as Jaquar or equal approved
H NO 10 308,000 3,080,000

600mm Towel rail as VADO ELE-184-C/P

I NO 8 126,500 1,012,000
Shower basket as VADO ELE-182A-C/P
J NO 2 159,500 319,000

TOTAL COLLECTION CARRIED

FORWARD 65,433,500

MECHN-10
Item Description Unit Quantity Rate (UGX) Amount (UGX)
TOTAL COLLECTION CARRIED
DOWN 65,433,500

Scrub-up Sink: Stainless steel scrub-up

sink type 304 to BS EN 10088/1 1500mm
B long, wall mounted as scrub-up trough NO 1 550,000 550,000
complete with 2No. wall mounted lever
action mixer taps

SHOWER

C 800mmx800mm masonary shower tray with NO 10 660,000 6,600,000

a grade complete with stainless steel trap
finished in terazzo to Architect's details

Dilution recovery traps to hold 2.3 litres and

G complete with nit couplings for screwing to NO 2 244,200 488,400
waste inlets and outlets.

73,071,900
MECHN-11
Item Description Unit Quantity Rate (UGX) Amount (UGX)
INTERNAL DRAINAGE
Supply and Install the following
including clamps/ brackets for
supporting pipes, builders works which
involves making good to any openings
made in floor slabs and chiseling of walls,
PVC soil and waste system to BS 4514
with fittings, fixed according to the
manufacturer's printed instructions and
BS 5572:1978 all as supplied by KEY-
TERRAIN or equal, complete with all
fittings and accessories.

40mm PVC heavy gauge pipes complete

with bends and all accessories for WHBs,
A sinks, in floor, walls, up to manholes/Gully LM 100 7,700 770,000
Trap .

50mm PVC heavy gauge pipes complete

with bends and all accessories for Showers,
B in floor, walls, up to manholes/Gully Trap. LM 70 10,230 716,100

110mm PVC heavy gauge pipes complete

C with bends and all accessories for WCs, in LM 100 23,100 2,310,000
floor, walls, up to manholes/Gully Trap.

Floor Traps as Key Terrain complete with

D all accessories NO 26 115,500 3,003,000

E 110 x 50ø - shower trap NO 10 88,000 880,000

Manholes
Excavate pit for manhole starting from
ground level and not exceeding 1200mm
deep, part return and part ram and cart
away, 100mm benching to bottom of
manhole finished with 12mm water proofed
F cement and sand (1:2) steel trowelled NO 42 660,000 27,720,000
smooth and including forming 100mm half
round channel, 150mm thick solid concrete
block walls in cement and sand (1:3) mix
mortar and finished with 12mm waterproof
cement and sand (1:2) rendering, steel
 G Triangle heavy duty manholes covers NO 42 275,000 11,550,000

46,949,100
MECHN-12
PORTABLE EXTINGUISHERS
9kg capacity manganese steel portable CO2
gas fire extinguishers conforming to BS
I 1288, including the appropriate nominal gas No 7 770,000 5,390,000
content

9kg capacity dry powder portable fire

J extinguisher conforming to BS 1288 No 7 770,000 5,390,000
including the appropriate nominal content

TOTAL COLLECTION CARRIED

FORWARD 10,780,000

MECHN-29

Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL COLLECTION CARRIED
DOWN 10,780,000
Testing and certification

Allow for testing the whole of the fire

fighting installation to the requirements of
B the regulatory authority and Fire Brigade, ITEM 1 550,000 550,000
Uganda Police.
 TOTAL COLLECTION CARRIED TO SUMMARY 11,330,000
MECHN-30

Item Description Unit Quantity Rate (UGX) Amount (UGX)

AIR CONDITIONING

Air-conditioning is planned at the

following areas:
i) Operation theatre 1

ii)
Operation theatre 2

Airconditioning shall in all cases be in

accordance with the general
specifications. Multi-system
airconditioners with a configuration of an
outdoor unit serving a number of indoor
units specified

Supply, delivery, installation, setting to

work, testing and commissionig of the
entire operating theatre airconditioning
system.

Operation theatres
18,000 Btu/hr6KW indoor unit as Daikin
A Cat No. FT60GVE or equal configured as No 3 6,600,000 19,800,000
Daikin split air conditioning unit

TOTAL COLLECTION CARRIED

FORWARD 19,800,000

MECHN-34

Item Description Unit Quantity Rate (UGX) Amount (UGX)

REFRIGERATED MORTUARY
CABINETS (3 BODY CAPACITY)
COMPRISING THE FOLLOWING:
Catalogues of equipment offered to be
submitted with the bids
Chromadek Interior and Exterior:
0.6mm frost white chromadek with 100mm
16kg/3 polystyrene insulation pressure
bonded to inner and outer sheets.

Stainless Steel doors and Frost:

0.9mm 304 grade stainless steel front panel
with 100mm
pressure bonded polystyrene insulation. 3
individual
doors with 304 SS front and sides, ABS
back and
pressure injected polyurethane insulation.
Rubber door
gasket seals on ABS thermal break. Doors
fitted with
lockable spring loaded handle.

Stainless Inner floor tray and drain:

0.9mm 304 stainless steel bottom tray with
32mm BSP
socket drain outlet. 100mm pressure
bonded polystyrene
insulation to bottom panel.

Stainless steel body trays:

Dished 304 stainless steel body tray with
25mm diam
304 SS pipe frame, fully welded fory hygene.

Galvanized lower frame with level-lining feet:

Adjustable screw in feet allow 40mm height
adjustment
in 2diarections.
Nylon rollers on stainless steel pins:
65mm Nylon rollers (6 per body tray) allow
smooth
movement of the tray.
Rollers are circlipped to a 16mm 316 SS pin
which is
 bolted to an internal support frame buried in
the insulation
Rubber stoppers prevent the tray from
hitting the back of
the cabinet.

MECHN-37

Item Description Unit Quantity Rate (UGX) Amount (UGX)

Rear mounted removable refrigeration
system:
A single phase 1/2 HP compressor ,
condenser, fan,
pressure switch, filter drier, sight glass,
thermostat,
electrical connection box and expansion
valve are mounted
on the outside of a stainless steel hinged
door on the
rear of the unit. The evaporator, fans and
drip tray are
firmly attached to the inside of the door.
This allows easy
servicing and ultimate replacement of the
complete
refrigeation system. Spare refrigeration
units are available
as back up. Condenser selected for 43 C
ambient,
evaporating temperature -5 C. Cabinet
temperature 4 C

Dimension L x W xH 3 door:
2400mm x 800mm x 1900mm (add 400mm
for refrigeration system ITEM 1 27,500,000 27,500,000
 27,500,000
MECHN-38

Item Description Unit Quantity Rate (UGX) Amount (UGX)

MEDICAL GASES
Bidders are to submit with their bids
catalogues of equipment they propose to
offer and succeessful bidders shall be
required to submit shop drawingh of
their systems at no extra cost to the client

Automatic central and area monitoring

system for the functioning of the medical
supply soirces and pipelines systems
A including indicator lights and audible alarm ITEM 1 33,000,000 33,000,000
signalsto warn of changeover to seconda
gas sources and abnormally high or low
pressure

Oxygen supply
Supply, deliver and fix a liguid oxgyen
station comprising of a 500litre stianless
steel tank with full charge of liquid oxygen
B and evaporator all enclosed in a steel cage No 1 11,000,000 11,000,000
for duty oxygen supply inclusive of tank
plinth and power suuply to
manufacturer'specifications
 65kg oxgyen gas cylinder of proprietary
manufacture complete with emergency
pressure release valve all fittings and
C accessories and with full charge of gaseous No 4 2,488,200 9,952,800
oxygen for stanbdby oxygen supply - 2No
standby bank and 2No emergency supply
cylinder at each of theatres
Automatic oxygen changeover for 2 oxygen
supplies banks (one from the liquid oxygen
station and the other from a bank of the
D 2cylinders) with each operating at a No 1 1,244,100 1,244,100
maximum pressure of 200 bars of
proprietary manufacture and complete with
controls and all accessories

Pipework
Supply, deliver and fix seamless copper
and/or copper alloy pressure piping
system to BS 1306 including fixing and
jointing. Tenders must allow in their
tender pipework prices for all coupling
connectors, joints, seals and all
accessories required for the running

25mm diameter pipe in trench and

E therefrom wall chase and (ground floor) M 44 12,500 550,000
slab to duct

20mm diameter pipe in wall chase as main

F M 25 103,675 2,591,875
distribution pipework on Ground floor

13mm diameter pipe in wall chase to draw

G M 85 41,500 3,527,500
off points

TOTAL COLLECTION CARIED

61,866,275
FORWARD
MECHN-39

Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL COLLECTION BROUGHT

61,866,275
DOWN
 Extras over copper and copper alloy
pressure piping as follows:

H 25mm diameter zonal service valve No 3 124,500 373,500

I 13mmdiameter zonal service valve No 6 103,600 621,600

J 25mmx25mmx20mm tee No 2 103,600 207,200

H 20mmx20mmx13mm tee No 4 103,600 414,400

I 25mmx25mmx20mmx20mm cross tee No 2 143,000 286,000

12mm oxygen draw off hose drops and

J No 10 124,500 1,245,000
nozzleS

Nitrous oxide supply

Nitrous oxide supply: To be routinely
K procured from an accredited dealer. The
dealer to be named with the bid

65kg high pressure nitrous oxide gas

cylinder of proprietary manufacture
complete emergency pressure release valve
L No 2 2,488,200 4,976,400
with all fittings and accessories and with
full charge of gaseous oxygen for stanbdby
nitrous oxide supply.

TOTAL COLLECTION CARRIED

69,990,375
FORWARD
MECHN-40

Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL COLLECTION BROUGHT

69,990,375
DOWN
Automatic oxygen changeover for 2 oxygen
supplies banks (one from the liquid nitrous
oxide station and the other from a bank of
A the 4 cylinders) with each operating at a No 2 1,244,100 2,488,200
maximum pressure of 200 bars of
proprietary manufacture and complete with
controls and all accessories
Pipework
 Supply, deliver and fix copper and/or
copper alloy pressure piping system to
BS 1306 including fixing and jointing.
B Tenders must allow in their tender
pipework prices for all coupling
connectors, joints, seals and all
accessories required for the running

25mm diameter pipe in trench and

C M 44 124,500 5,478,000
therefrom wall chase

20mm diameter pipe in wall chase as main

F M 25 103,600 2,590,000
distribtion pipework on floor - theatres

13mm diameter pipe in wall chase to draw

J M 65 41,500 2,697,500
off points

Extras over copper and copper alloy

pressure piping as follows:
TOTAL COLLECTION CARRIED
83,244,075
FORWARD
MECHN-41

Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL COLLECTION BROUGHT
83,244,075
DOWN
A 25mm diameter zonal service valve No 3 124,500 373,500

B 20mm diameter zonal service valve No 6 103,600 621,600

C 25mmx25mmx20mm tee No 2 103,600 207,200

D 20mmx20mmx12mm tee No 4 103,600 414,400

E 25mmx25mmx20mmx20mm cross tee No 2 143,000 286,000

F 12mm oxygen draw off nozzle No 10 124,500 1,245,000

Suction Line
 Supply, deliver and fix a suction
compression system comprising of two
independent suction pumps inclusive of all
G SET 1 2,750,000 2,750,000
accessories to mantain the required suction
pressures at least three suction locations
simultaneously
Supply, deliver and fix copper and/or
copper alloy pressure piping system to
BS 1306 including fixing and jointing.
Tenders must allow in their tender
pipework prices for all coupling
connectors, joints, seals and all
accessories required for the runnings
20mm diameter pipe in wall chase as main
I M 10 103,600 1,036,000
suction pipework on Ground floor

M Suction hose drop and nozzle S No 10 165,000 1,650,000

Medical Air

Medical air: To be routinely procured from

N an accredited dealer. The dealer to be
named with the bid

Compression pumps system to deliver the

O medical air to the pipelines to later LS 1 3,300,000 3,300,000
specifications
TOTAL COLLECTION CARRIED
95,127,775
FORWARD
MECHN-42

Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL COLLECTION BROUGHT

95,127,775
DOWN
Pipework
Supply, deliver and fix copper and/or
copper alloy pressure piping system to
BS 1306 including fixing and jointing.
Tenders must allow in their tender
pipework prices for all coupling
connectors, joints, seals and all
accessories required for the running

25mm diameter pipe in trench and

A M 44 124,500 5,478,000
therefrom wall chase and
 20mm diameter pipe in wall chase as main
C distribtion pipework onground floor M 25 103,600 2,590,000
theatres

13mm diameter pipe in wall chase to draw

G M 65 41,500 2,697,500
off points atground floor
Extras over copper and copper alloy
pressure piping as follows:
J 25mm diameter zonal service valve No 3 124,500 373,500

K 20mm diameter zonal service valve No 6 103,600 621,600

L 25mmx25mmx20mm tee No 2 103,600 207,200

M 20mmx20mmx12mm tee No 4 103,600 414,400

25mmx25mmx20mmx20mm cross tee No 2 143,000 286,000

12mm oxygen draw off nozzle No 10 124,500 1,245,000

tot 109,040,975
MECHN-43

Item Description Unit Quantity Rate (UGX) Amount (UGX)

TOTAL FOR MECHANICAL 231,267,320
 Rate
Item Description Unit Quantity Amount (UGX)
(UGX)

TOTAL COLLECTION FOR 1,111,816,550

HOSPITAL ELECTRICAL

TOTAL COLLECTION FOR 231,267,320

HOSPITAL MECHANICAL

1,343,083,870