Training program 2024

for automotive technology

1
Bosch Service Training Academy
Your contact persons

Nosipho Maziko Smangele Mudzanani

Bosch Service Training Academy Bosch Service Training Academy
Responsible for Training Co-ordination & Supporting Administration
Administration

Garth Petzer Lochner Dicker Michael Groenewald

Senior Technical Instructor Technical Instructor Technical Instructor

Responsible for Electronic ,Electrical Responsible Gasoline Management Responsible for Diesel Component
Components. Electrical Vehicle Systems, Climate Control Systems & Systems, Truck Systems & Vehicle
Technology & , Climate Control Braking Component systems. Analyzer Component Testing.
Systems

Qualified in 1992 with Bosch Service Qualified in 2009 with the Bosch Service Qualified in 2001 with Bosch Service
Organization since September 2001 Organization snice July 2023 Organization since August 2023

Address and contact

Robert Bosch South Africa
Mobility Aftermarket Division

Robert Bosch Pty Ltd Phone: +27 11 651 9600

96 15th Road Randjiespark E-Mail: [email protected]
Midrand
1685

1
Table of contents
Your route to Bosch Service Training 03

Learning at the highest level 04

Foreword 06

Online Trainings 08

New training series 16

Diagnostics 18

Gasoline Injection 24

Diesel Injection 30

Alternative Drives 44

Body, comfort and driver assistance systems 50

Electric & Electronic 58

Chassis and braking 68

Service and Maintenance 74

Trucks 76

Customer Relations Program 84

New training series 92

Training Calendar 2024 107

Things you need to know 119

Bosch Service Training Order form 2024 122

2
 Your Route to Bosch Service Training - Fast
and Easy
www.bosch-training-solutions.com/
We make the entire range of training courses available to you online on the Service Training Centre.
Here you can conveniently book and manage face-to-face training. In addition, you have a large selection of online
training courses and live webcasts available, in which knowledge is imparted directly at work or at home on the
computer.

All registered users have their own area where training courses that have already been booked can be viewed. At
the same time, all our offers can be booked directly in on our website.Executives or managers also can view the
training history of the employees assigned to them and to select and book targeted training measures for their
employees. This means that training and further education can be planned and organized in a targeted manner.

Your way to Bosch Service Training

– Automotive Training Portal

Booking process with

Booking process for users
manager role for employees
1 www.bosch-training-solutions.com

2 Registration and/or Login 1 www.bosch-training-solutions.com

3 Select and book training 2 Login

4 After a successful booking you will 3 Select training and to Add to Cart
receive a confirmation by e-mail
4 Select “User”. check box purchase for
5 In the menu item My dashboard you can
see your bookings and can make them
"Other” and send (Requirement
assigned manager role)
administer
5 Go through payment, place order

Booking procedure for those interested 6 Note the note for managers and select the
"Assignment“ link
1 www.bosch-training-solutions.com

2 Login and desired training in Select

7 Select employees Assign and click
Submit
training catalogue

3 Select the Get information about new

8 After successful booking, you and
your selected employees will receive a
training dates link confirmation by e-mail

4 In the selection field I would like to be

informed about appointments at any
location tick and if insert desired comment

5 Click on Send. We will inform you as soon

as the desired training date is available

3
Learning at the highest level
Technical Technologies coverage at Bosch

Gasoline Injection
Alternative
Drives
Electrical &
Electronic
Diesel Injection

Chassis and
New Training Braking
Serries Diagnostics

Body, Comfort & Driver Customer Relations

Assistance Systems Program

The challenge -
master new vehicle technologies
The automotive industry is continually going through changes that are already evident in the
workshops recognition. Trained employees will have a clear benefit for problem solving on vehicles
that are becoming more and more complex, new technologies are a challenge for every car
workshop. Only with the necessary specialized knowledge, workshop employees can carry out
diagnostic, maintenance and repair work in a timely manor.

Over 100 practice-oriented training Knowledge and experience of Bosch Modern knowledge transfer at
courses stand for comprehensive are in automotive engineering and one of our training locations in
know-how as face-to-face training or remain unique Midrand, Durban or Cape Town
in digital form shape available and over our internet platform
https://www.bosch-training-solu-
tions.com/

Robert Bosch Midrand Bosch training is acknowledged by:

offers Automotive Electrical
and Diesel Fuel Injection
trade testing

4
 “We should all strive to improve on the
status quo: none of us should ever be
satisfied with what has been achieved but
should always endeavor to do better.”

Robert Bosch

5
Foreword
Dear workshop partners,

Today’s vehicles are becoming more and more

complex - and new technologies always pose new
challenges.

Only with the necessary specialist knowledge are

workshop employees able to carry out diagnostic,
maintenance and repair work on current vehicle
models effectively and cost-effectively. Clearly
structured education and training management is
essential to ensure that you are always up to date with
the development of automotive technology.

The Bosch Service Training Centre would like to

support you in this development process with a
comprehensive, up-to-date range of technical and
commercial training and education series with
certified degrees

Advantages at a glance:

1. Effective service and faster troubleshooting

2. Greater security in the repair process

3. Excellent customer service

4. Positive customer reviews

5. Optimization of organization and processes

in the company

6. Long-term customer loyalty

7. Corporate Success

6
 Bosch Training Centre: Technological know-how,
made available in a state-of-the-art surrounding

Bosch: An Innovative Major System Supplier for More Comprehensive System Information
than 130 Years
• As a result of the comprehensive excellence of Bosch
• As a major supplier of complete vehicle systems in all vehicle systems, the contents of the individual
technology, Bosch can look back at over more than a training courses are always holistically oriented
hundred years of experience. and provide sound, easy to understand content. In
addition to the systems , the interaction with other
• Bosch innovations have set the standard worldwide. systems and components in the vehicle are also part
As the largest independent supplier of original of the training system.
equipment for motor vehicles, Bosch works closely
with the automotive industry in vehicle development. From Theory to Practice

• Bosch products represent the state of art in vehicle • The contents of all the training courses have a
technology. With its comprehensive knowledge Bosch clear structure designed in accordance with the
is also a premier service provider for vehicle systems latest pedagogic methods and proceed from the
training. understanding of theoretical basic principles to
concrete practical application.
The Bosch Service Organisation Leads in Knowledge
and Capability • This effective method helps the participants to
acquire deeper knowledge and a more secure
• Bosch Service centres are represented throughout understanding, particularly in very complex technical
the world. With this comprehensive network of fields.
approximately 16,000 authorised workshops. Through
over 400 registered workshops in South Africa, Bosch Competence Methods
guarantees blanket service in all fields of motor
vehicle customer service. This valuable know-how is • Time is money, particularly in connection with the
also reflected in the Bosch training topics, which are provision of services. Troubleshooting and subsequent
based on practical customer orientation. repair work must be tackled with confidence
and competence. Using a systematic approach to
Bosch: Worldwide Training Presence troubleshoot, the participant learns to narrow down
the causes of a problem step by step and thus gain
• Bosch know-how is a trend-setter worldwide. reliability and efficiency in each individual working
Everywhere that Bosch motor vehicle technology is step. The time and cost frame of a repair can be
used, there is a high need for qualified specialists determined with far greater accuracy, which is a
in the service field. Bosch training centres therefore decisive factor in the competitiveness of a vehicle
exist throughout the world. This guarantees that the workshop.
recognised high quality of Bosch products is reflected
in competent customer service.

7
Online &
Live webcast
Trainings
 Online Trainings
Live Webcast Trainings
Course number: 1 987 026 036
www.bosch-training-solutions.com

Virtual live knowledge transfer in theory and practice

Direct communication with the trainers via chat function

Apply new teaching methods - in addition to the existing face-to-face training courses and our on-line offer,
we also offer live webcast training in our training program. Our trainers instruct you with extensive
knowledge in theory in a virtual classroom or with practical examples to your disposal. As usual, you will
receive a lot of information about vehicle systems and the corresponding ones Bosch products. Of course,
you also have the opportunity to ask questions. This question will be answered directly in the live webcast.
The live webcast training sessions last between 60 and 120 minutes per topic.

A stable internet connection is required

Advantages of
Live Webcast Training:
► Latest knowledge available in theory and prac-
tical examples
► Low employee absences
► Diverse learning
► Particularly economical: Hotel and hospitality
costs omitted
► Environmentally friendly: The digital solution
saves kilometers driven, CO₂ and improves the
life cycle assessment your workshop.

Individual live webcast training –

Put together your own individual webcast training.

► You would like your employees to specialize in a specific department or a Bosch Diagnostics pro-
duct?
► You can‘t find anything suitable in our current training offer?

Then we look forward to your inquiry stating content and duration to the e-mail address
[email protected]

9
Online training series
Live Webcast Trainings
Course number: 1 987 726 036
www.bosch-training-solutions.com

ESI[tronic] live web training part 1 Duration: 120 min

Content: ► Introduction to the ESI[tronic] and its user interface

Vehicle identification options
Explanation of multimeter, oscilloscope, user settings,
online updates and much more
Course Key: ESI 1

ESI[tronic] live web training part 2 Duration: 120 min

Content: ► Introduction to diagnosis with the Bosch KTS, e.g. B.

Read out and delete error codes
Reset maintenance work
Brake service
Adjustments and settings
Course Key: ESI 2

ESI[tronic] live web training part 3 Duration: 120 min

Content: ► Troubleshooting Guides: Design and structure

Maintenance
Circuit diagrams
Known bugs online
ESI Ticket, Technical Inquirie
Course Key: ESI 3

Bosch FSA 500 / 7xx oscilloscope measurements part 1 Duration: 120 min

Content: ► Explanation of the FSA 500 / 7xx hardware: all connections and lines
Introduction to the FSA software
Different measurements with:
• test steps
• Unit Tests Course Key: FSA 1

Bosch FSA 500 / 7xx oscilloscope measurements part 2 Duration: 120 min

Content: ► Explanation of the FSA 500 / 7xx hardware and software

Different measurements with the:
• test steps
• Unit Tests
• Universal oscilloscope 2- / 4-channel
• Ignition Oscilloscope
• Characteristic recorder
• URI / signal generator
Course Key: FSA 2

10
 Online training series
Live Webcast Trainings
Course number: 1 987 726 036
www.bosch-training-solutions.com

Sensor live web training part 1 Duration: 120 min

Content: ► Sensor basics

Overview of sensors in vehicles
Inductive sensors
Magnetic field sensors
Summary
Course Key: SEN 1

Sensor live web training part 2 Duration: 120 min

Content: ► Piezo sensors

Thermal sensors
Potentiometric sensors
Capacitive sensors
Summary
Course Key: SEN 2

Sensor live web training part 3 Duration: 120 min

Content: ► Radar sensors

Optical sensors
Electrochemical sensors
Course Key: SEN 3

OBD (On-Board Diagnostics) Duration: 120 min

Content: ► Development of the OBD

Monitoring functions
OBD diagnostic options
Evaluation of actual values
Course Key: OBD

Fuel pumps (low fuel pressure systems) Duration: 120 min

Content: ► Structure and function of

• Low pressure fuel pumps
• Fuel filter
• Conveyor module
• Low pressure delivery systems
Electrical tests on the low-pressure system
Hydraulic tests on low-pressure systems
Course Key: LFP

11
Online Trainings
Live Webcast Trainings
Course number: 1 987 726 036
www.bosch-training-solutions.com

Driver assistance systems in cars Duration: 120 min

Content: ► Structure / function of different sensors such as camera, radar, etc.

Product presentation Bosch DAS 3000
Practical use of the Bosch DAS 3000 on various sensors and vehicles, online
updates and much more.

Course Key: DASi

Basics of supercharging systems Duration: 120 min

Content: ► Basics of supercharging systems

Overview of different charging concepts Exhaust turbo and mechanical
supercharging 48 volt charging systems
Diagnosis and damage patterns in charging systems Repair instructions

Course Key: BSS

Thermal management systems Duration: 120 min

Content: ► Construction of a water cooling system

Functionality and diagnosis of the individual components in the cooling system
Task and function of the characteristic map cooling system
Structure and functioning of various cooling systems of combustion engines
and electric vehicles
Filling and bleeding of modern cooling systems with KTS
Course Key: TMS

General high-voltage instruction Duration: 120 min

Content: ► Structure of the high-voltage system

Dangers of electric current
Accident prevention
Electrical hazard and first aid

This course is an initial introduction to the handling of EV and

HV vehicles, the Do’s and Don'ts

Course Key: GHV

12
 Online Trainings
Live Webcast Trainings
Course number: 1 987 726 036
www.bosch-training-solutions.com

Basics of Electrics 1 Duration: 120 min

Content: ► Motor vehicle electrics refers to the electrical systems and their components.
Explained are:
• Vehicle power supply
• Vehicle electrical system overview
• Understanding electrical wiring diagrams
• Vehicle electrical components
• Vehicle electrical communication and diagnostic systems Course Key: BE1

Basics of Electrics 2 (Battery) Duration: 120 min

Content: ► In the context of motor vehicles, the basics of the battery involves several key
aspects:
• Battery power with the correct cold cranking amperage and amp hour ratings
• Battery state of health, aging and storage
• Battery supply voltage
• Understanding the battery designs and different construction types
• Battery testing, servicing and maintenance
Course Key: BE2

Basics of Electrics 3 (Starter) Duration: 120 min

Content: ► Starters in vehicles are crucial components responsible for initiating the engine's
operation. Hereafter are the basics:
• Understanding the starter designs and different construction types
• Starter designations and their power ratings
• Starter motor functions and recommended preparations (pre-checks like bad
earths)
• Starter motor components
• Starter motor testing, servicing and maintenance Course Key: BE3

Basics of Electrics 4 (Generator) Duration: 120 min

Content: ► Generators and Alternators play a crucial role in a vehicles electrical system.
Hereafter are the basics:
• Understanding the alternator designs and different construction types
• Alternator designations and their power ratings
• Alternator functions and recommended preparations (pre-checks like belt
tensions)
• Alternator components
• Alternator testing, servicing and maintenance Course Key: BE4

13
Online Trainings
Live Webcast Trainings
Course number: 1 987 726 036
www.bosch-training-solutions.com

Modern LED lighting technology in cars Duration: 120 min

Content: ► Explanation of different modern LED lighting systems such as

e.g., DLA, Active LED, Multibeam LED, Matrix LED, ILS or ILUX
Checking and adjusting modern LED headlights using the
Bosch KTS 5xx with ESI[tronic] and the Bosch HTD 815
Course Key: LEDi

Bosch Gasoline Direct Injection Part I Duration: 120 min

Content: ► Explanation of the differences between intake manifold and gasoline direct injec-
tion
Advantages of direct fuel injection
Structure of the low- and high-pressure circuits of the Bosch MED 7 and 9
Explanation of the different operating modes
Practical exercises and measurements live on the vehicle

Course Key: GDI 1

Bosch Gasoline Direct Injection Part 2 Duration: 120 min

Content: ► Structure and function of the most modern gasoline direct injection engines
and its components:
• Fuel systems
• Ignition
• Charge
• Exhaust after treatment
Practical exercises and measurements live on the vehicle
Course Key: GDI 2

Bosch Gasoline Direct Injection Part 3 Duration: 120 min

Content: ► Explanation of the differences between intake manifold and gasoline direct
injection
Advantages of direct fuel injection
Structure of the low- and high-pressure circuits of the Bosch MED 7 and 9
Explanation of the different operating modes
Practical exercises and measurements live on the vehicle

Course Key: GDI 3

14
 Web Based Training:
Virtual Diagnosis Simulation – the virtual
workshop from Bosch www.bosch-training-solutions.com

The virtual diagnosis simulation offers the user the possibility of everyday workshop
Situations such as troubleshooting using Bosch diagnostics
devices to play through in a virtual workshop. In the various virtual workshop
situations, the specialist areas of petrol injection and diesel injection, motor vehicle electrics and elec-
tronics, brakes and diagnostics are dealt with.

In this way, the logical and methodical procedure for system diagnostics, troubleshooting and repairs
is playfully trained. The virtual diagnostic simulation helps with the safe handling of the diagnostic and
service devices from Bosch (such as FSA, KTS). Your own skills in this area can be improved virtually.
Thus, it falls to the user after online training from Bosch easier to safely and systematically apply the
learned handles and methods in the workshop.
The primary task of this learning concept is the development of methodological knowledge using
Bosch diagnostic devices for the targeted analysis of errors in vehicles.
You can find the complete offer*, detailed information, prices and the option to book this online train-
ing on the Automotive Campus at www.bosch-training-solutions.com
.

Virtual Diagnosis E-Learning

1 987 727 898

Virtual diagnosis engine management (petrol injection / e-gas)

Virtual diagnosis engine management 2 (petrol injection / air systems 1 987 727 899

Virtual diagnosis comfort electronics 1 987 727 900

Virtual diagnosis comfort electronics 2 (electronic sliding door) 1 987 727 901

Virtual diagnosis ABS / ESP system 1 987 727 903

The benefits of Virtual Diagnosis Simulation:

► A focus on shorter time and low cost to increase technician‘s knowledge base
► The Virtual diagnosis can be used as often as you like with realistic examples
► Know how on safe handling of diagnostic and service devices
► Supports your earning management system with focus on your team know how

see www.bosch-training-solutions.com
If no dates have been given yet, the date will be set at a later date when there are enough registrations from interested parties.
* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are validate within the terms & condition policy

15
New training series
Your way to the Bosch system technician
Qualify yourself or your employees to become a Bosch specialist in the individual specialist areas of petrol,
diesel, electronics or brakes. In order to meet the Bosch Service quality standards in the Bosch Service
companies, a Bosch system technician must be available in the company or, alternatively, all four new train-
ing series* in the areas of petrol, diesel, electronics and brakes. With the qualification to become a Bosch
specialist in the areas of petrol, diesel, electronics, brakes, as well as the Bosch automotive mechanic.

Attending the CR-P customer relations and high-voltage technician (HVT) training courses is possible to
take part in the Bosch system technician exam.

Customer
Relations
Bosch system technician
Program

+
Bosch high-vol- Bosch diesel Bosch electro- Bosch brakes Bosch gasoline
tage expert / specialist nics specialist specialist specialist
High voltage
expert

16
 New training series
Completely new service training syllabus
being introduced in 2024/2025
This is to meet the international standards offered by Robert Bosch Worldwide. Here is an introduction of
the range of training courses for the workshops. Kindly note that the following training courses will be
new offering completely new content in 2024/25

New training topics

Diesel Fuel Injection Fundamentals 1 987 727 902
Vehicle electronics 1 1 987 727 520
Vehicle electronics 2 1 987 727 521
Practical training on modern automotive electronics and driver assistance
1 987 727 522
systems
On-board networks and electrical systems in cars 1 987 727 502
Helpers for driving safety: ABS and ESP from Bosch 1 987 726 351

New syllabus content relating to the market requirements

Gasoline Injection for advanced users 1 987 726 116
Gasoline injection for professionals 1 987 726 120
Diesel fuel injection for advanced users 1 987 726 248

Live webcast topics covering Electric vehicles (EV)

Face-to-face – High-voltage expert (HVE)
Working under voltage (AuS) Specialist for working on under 1 987 726 159
Live HV Components Stage 3E, Part 1 (Theory and Practical)

Live Webcast – High Voltage Technician (HVT) Refresher 1 987 726 382
Live Webcast – High-Voltage Expert (HVE) Refresher 1 987 726 383
Sensors 1-3, OBD, low fuel pressure, thermal management and much more. 1 987 726 036

17
 Diagnostics

18
 Diagnostics
ESI[tronic] 2.0 in connection with KTS
(3xx / 5xx / 6xx / 8xx / 9xx / ESI online) Course number: 1 987 727 869
www.bosch-training-solutions.com

Course Key: ESI/KTS

3 days

ESI[tronic] 2.0 for Passenger Cars is one of the leading diagnostic

software for vehicle maintenance, diagnostics and repair. Maintenance
and wiring diagrams, diagnostic functions, repair and troubleshooting
instructions as well as vehicle data for over 150 brands can be found
reliably, quickly and easily.

Attendees: Employees from car workshops with little or no knowledge of handling the
ESI[tronic] 2.0 and the KTS. In advance, we recommend self-assessment using
the WBT knowledge test found in ESI[tronic] 2.0 online software package.

Learning goals: Employees has a sound knowledge in using ESI[tronic] 2.0 software to its full
potential in the workshop.

All content Theory:

at a glance: Software installation and activation
Carry out user-defined settings in the main menu
Safe and quick identification of a vehicle
Design and structure of SIS troubleshooting instructions including circuit
diagrams, Error code tables, installation position tables, etc.
Applying SIS / CAS functions
Preparation of work logs and maintenance schedules
Development of all types of information including product identification to
part number level
ESI[tronic] 2.0 on-line and on-line updates

Practical:
Exercises with the KTS on the vehicle
Measurements with the multimeter and oscilloscope of the respective KTS
(not with that of the FSA 500 / 7xx)
EBR, known errors on-line and insights into ESI[tronic] online
Using Connected Repair in the workshop

Miscellaneous: This is not training for the KTS Truck and FSA 500 / 7xx.
No aggregate repair. No system training (petrol, diesel, brakes, electrics)

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

19
Diagnostics
Operation & Application of Bosch tester analyser
FSA 7xx / 500 Course number: 1 987 726 024
www.bosch-training-solutions.com

Course Key: FSA

2 days

The FSA 500 / 7xx is a future-proof and expandable complete system for
diagnostics.
With this FSA measuring system, you have everything at your fingertips for
true flexibility in the workshop – a safe investment in the future.

Attendees: Employees from car workshopswho have an FSA 720, 740, 760 or FSA 500
or are interested in such a device

Learning goals: Safe use of the Bosch engine tester FSA 7xx / 500 in connection with KTS and
ESI[tronic] 2.0

Content: Explanation of the measurement possibilities and practical applications of

the above-mentioned test device and necessary tools
Selection and use of the right measuring equipment, test steps and
component tests
Targeted evaluation of individual measurement results and signals in order to
to narrow down error codes better
Troubleshooting vehicle electronic systems, engines and
working models

Miscellaneous: No system training in the field of petrol, diesel, brakes and electrics

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

20
 Diagnostics
Operation & application of
ACS Fluid Exchange Unit Course number: 1 987 727 730
www.bosch-training-solutions.com
3 days
Course Key: ACS
The vehicle air-conditioning systems
The course on Vehicle Air Conditioning Systems, with a focus on Bosch ACS
units, provides comprehensive insights into the principles and
functionalities of air conditioning units in automotive vehicles. Participants
explore the intricacies of refrigeration cycles, compressor technologies, and
climate control mechanisms, gaining practical insights into the design and
operation of Bosch ACS units. The course emphasizes the importance of
efficient maintenance and diagnostic techniques, equipping the participants
to address the complexities of modern automotive air conditioning
technology and servicing practices.
Attendees: Employees from vehicle workshops who own the ACS device or are interested
in an ACS device, how to use the device effectively in operation & application

Learning goals: Safe use of ACS device within the workshop. In line with the Chemicals
Climate Protection Ordinance, all persons who carry out maintenance or
repair work on motor vehicle air conditioning systems, Carry out leak checks
and recovery, acquire a certificate of competence. The minimum requirements
for the specialist training
This training is within the EU Regulations and Standards
Content: Theory:
Air conditioning systems in motor vehicles - Introduction
Environmental impact
European and national
legislation Regulation (EC) No.
842 / 2006
Regulation (EC) No. 307 / 2008
Directive 2006 / 40 / EC
Chemicals Climate Protection
Ordinance Waste legislation – legal
basis
Physical basics:
Structure and function of the motor vehicle air conditioning system Repair
and maintenance work on motor vehicle air conditioning systems
Structure of air conditioning service units
Environmentally friendly recovery of refrigerant
Future automotive air conditioning technology (CO2 air conditioning
systems)
Practice:
Handling of refrigerant containers
Repair and maintenance work on motor vehicle air conditioning systems,
e.g. B. Recovery of R134a and R1234yf
Operation of an air conditioning service
unit

21
Diagnostics
Operation & application of injection pump test
bench EPS708 Course number: 1 987 727 526
www.bosch-training-solutions.com

Course Key: EPS 708

2 days

The EPS series of Diesel Component Testing, Pumps & Injectors

With the EPS 708 Test Bench, you have everything at your fingertips to test
and repair CR & CRI/N injection systems.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians, vehicle

locksmiths with practical experience in handling injection pump test benches.
Knowledge of CR systems is an advantage

Learning goals: Upgrade the Bosch injection pump test bench EPS 708 with all the accesso-
ries, operate and use

Content: Structure of the EPS 708, Maintenance procedures.

Various upgrade options for the EPS 708
Testing of Bosch CRI/N Injectors
Testing of Bosch CP high pressure pumps also with oil lubrication

Miscellaneous: This course is designed to support operator in the correct uses of the EPS708
fuel pump injector test bench

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

22
 Diagnostics
Operation & application of Injector test bench
DCI 700 Course number: 1 987 726 989
www.bosch-training-solutions.com

Course Key: DCI 7

1 days

The DCI series of Diesel Component Injectors

With DCI Test Bench, you have everything at your fingertips to test and
repair CRI/N Injectors.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians, vehicle

locksmiths with practical experience in handling injection pump test benches.
Knowledge of CR systems is an advantage

Learning goals: Upgrade, operate and use the Bosch DCI700 injector test bench with all the
accessories. Do maintainances

Content: Structure of the DCI700

Maintenance options
Structure of the new software DCI900
Working with the databases
Testing of different injector types:
• CRI3 (piezo)
• CRI2-18 with VCC
• CRI2-18 with VCA
• CRIN with NIMA
• CRIN 4.2

Miscellaneous: This course is designed to support operator in the correct uses of the DCI700
injector test bench

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

23
Gasoline
Injection
 Gasoline Injection
Bosch gasoline specialist

ESI[tronic] 2.0 in connection with KTS 1 987 727 869

Live Webcast ESI[tronic] Web Training Parts 1-3 1 987 726 036

Gasoline Injection Fundamentals 1 987 727 896

Live Webcasts
Sensor's part 1-3
OBD (On-Board-Diagnose) 1 987 726 036
Fuel Pump (Low fuel pressure)
HV instruction general (not applicable if proof of HVT)

Fuel injection for advanced users 1 987 726 116

Live Webcasts
Basics of supercharging systems 1 987 726 036
Thermal management system

Gasoline injection for professionals 1 987 726 120

Bosch gasoline specialist

Customer
Relations
Bosch system technician
Program

+
Bosch high-vol- Bosch diesel Bosch electro- Bosch brakes Bosch gasoline
tage expert / specialist nics specialist specialist specialist
High voltage
expert

25
Gasoline Injection
Gasoline Injection Fundamentals
Course number: 1 987 727 896
www.bosch-training-solutions.com

Course Key: GIF

3 days

In this course, you'll embark on your exploration of the fundamentals of

gasoline injection. We'll delve into various aspects of the system, such as
the layout of low-pressure fuel systems, encompassing fuel pumps,
pressure sensors, and intake manifold injectors. We'll also explore ignition
and air intake systems in motor vehicles, teaching you how to recognize,
assess, and diagnose the components within these systems.

Attendees: Employees in automotive service

Precondition: Participation in the following online courses is part of our training series
Trainings / live webcasts required:
ESI[tronic] 2.0 web training part 1-3 (alternatively participation in 3-day face-
to-face training possible
Can be booked at www.bosch-training-solutions.com

Learning goals: In-depth knowledge of fuel supply, mixture preparation, ignition and exhaust
gas aftertreatment as well as the diagnosis of gasoline intake manifold injec-
tion systems from various manufacturers

Content: Structure, task, function and testing of gasoline intake manifold systems and
their components
Explanation of different types of operation of low-pressure
fuel systems
Intake manifold systems
Ignition Systems
Interaction of sensors and actuators

Practical: Practical application of the knowledge imparted for diagnosis and repair work
on models and vehicles with gasoline low pressure fuel systems

Miscellaneous: This course is designed to support operator in the correct understanding and
function of the fundamental gasoline low pressure fuel systems

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

26
 Gasoline Injection
Gasoline Fuel injection for advanced users
Course number: 1 987 726 116
www.bosch-training-solutions.com

Course Key: GIA

3 days

This course will provide insights into the evolving systems utilized in
modern gasoline vehicles, with a particular focus on advancements in the
fuel supply side. We'll delve into topics like gasoline direct injection
injectors, high-pressure pumps, and more advanced air intake systems. By
the end of this course, you'll have the knowledge and skills needed to
work on these cutting-edge systems, enabling you to effectively test and
diagnose them.

Attendees: Employees in automotive service

Precondition: Participation in the following online courses is part of our training series
Trainings / live webcasts required:
Gasoline injection for Fundamentals,
ESI[tronic] 2.0 web training part 1-3 (alternatively participation in 3-day face-
to-face training possible), sensors 1-3, OBD, low fuel pressure, HV instruc-
tion in general (not applicable to HVT qualified participants)
Can be booked at www.bosch-training-solutions.com

Learning goals: In-depth knowledge of fuel supply, mixture preparation, ignition and exhaust
gas aftertreatment as well as the diagnosis of gasoline direct injection
systems from various manufacturers

Content: Structure, task, function and testing of Gasoline direct injection systems
and their components
Explanation of different types of operation and injection
Gasoline direct injection systems ignition
Interaction of sensors and actuators

Practical: Practical work and diagnosis on vehicles and engines with the above
listed systems

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

27
Gasoline Injection
Gasoline injection for professionals
Course number: 1 987 726 120
www.bosch-training-solutions.com

Course Key: GIP

3 days

Throughout this course, we will explore the latest advancements in

modern gasoline vehicles, particularly focusing on innovations in the fuel
supply side. Topics will include cutting-edge technologies such as gasoline
direct Piezo injectors, high-pressure pumps, advanced air intake systems,
ignition systems, and dual fuel systems. By the end of this course, you will
gain a comprehensive understanding of these systems and components,
equipping you with the skills to effectively test and work on them.

Attendees: Employees in automotive service

Precondition: Participation in the following online courses is part of our training series
Trainings / live webcasts required:
Gasoline injection for Fundamentals, Gasoline Fuel injection for advanced,
ESI[tronic] 2.0 web training part 1-3 (alternatively participation in 3-day face-
to-face training possible), sensors 1-3, OBD, low fuel pressure, HV instruction
in general (not applicable to HVT qualified participants)
Can be booked at www.bosch-training-solutions.com

Learning goals: In-depth knowledge of fuel supply, mixture preparation, ignition and exhaust
gas aftertreatment as well as the diagnosis gasoline direct injection systems
from various manufacturers

Content: Design, task, function and testing of the latest generation of gasoline direct
injection systems and their components
Interaction of the sensors and actuators, charging, types of injection and ex-
haust aftertreatment with particle reduction
Function, design and diagnosis of piezo and solenoid injectors including CVO
(Controlled Valve Operation)
Functionality and benefits of variable valve timing

Practical: Practical application of the knowledge imparted for diagnosis and repair work
on models and vehicles with gasoline direct injection systems

Miscellaneous: Practical work and diagnosis on vehicles and engines with the above listed
systems

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

28
Driven by

KNOW-HOW

Bosch OE competence:
As original-equipment (OE) supplier for vehicle
manufacturers all over the world, we provide
unique and comprehensive product and system
know-how. Automotive workshops can benefit
from our extensive range of original spare parts
and spare parts of matching quality. This results
in both highly reliable vehicle repairs and top
customer satisfaction.

bosch-workshop-world.com

What drives you

drives us
Diesel
Injection
 Diesel Injection
Bosch diesel specialist

ESI[tronic] 2.0 in connection with KTS 1 987 727 869

Live Webcast ESI[tronic] Web Training Parts 1-3 1 987 726 036

Diesel Fuel Injection Fundamentals 1 987 727 902

Live Webcasts
Sensor's part 1-3
OBD (On-Board-Diagnose) 1 987 726 036
Fuel Pump (Low fuel pressure)
HV instruction general (not applicable if proof of HVT)

Diesel fuel injection for advanced users 1 987 726 248

Diesel injection for professionals 1 987 726 249

Exhaust treatment of diesel cars with Euro standards 1 987 726 120

Bosch diesel specialist

Customer
Relations
Bosch system technician
Program

+
Bosch high-vol- Bosch diesel Bosch electro- Bosch brakes Bosch gasoline
tage expert / specialist nics specialist specialist specialist
High voltage
expert

31
Diesel Injection
Diesel Conventional Systems
Course number: 1 987 726 550
www.bosch-training-solutions.com

Course Key: DCS

9 days

This training is designed to educate individuals with at least 10-month

experience in the diesel workshops, who are working on conventional
diesel components and requires fundamental of diesel component testing
of different mechanical measurement type injection pumps & governors.

Attendees: Vehicle mechanics, diesel apprentices and Diesel Fuel Injection Mechanics with
10 months experience.

Precondition: Participation in the following online courses is part of our training series
Trainings / live webcasts required:

Learning goals: Complete understanding both theoretical and practical of Bosch A, MW and P
series pumps fitted wit RQ,RQV, RSV and RQV-K governors with and without
LDA compensation devices

Content:
Theory on A, MW and P series Pumps. RQ, RQV, RSV and RQV-K governors
with and without the LDA device.
Dismantle and assemble a and P series Pumps and governors according to
Bosch methodology and with all required measurements
Calibration of A and P series pumps RQ,RQV.RSV and RQV-K governors with
Lda where fitted, according to Bosch specifications and component instruc-
tion requirements.

Practical: Practical application of the is related to the complete dismantle, assembling

& Calibration fo all the above diesel components

Miscellaneous: This course is designed to support your employees to understand coneven-

tional diesel systems variants with practical work on these systems

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

32
 Diesel Injection
Diesel Fuel Injection Fundamentals
Course number: 1 987 727 902
www.bosch-training-solutions.com

3 days Course Key: DIF

Diesel Fuel Injection Fundamentals refer to the foundational principles,

components, and operating mechanisms associated with the delivery of diesel
fuel into the combustion chamber of a diesel engine. This fundamental
knowledge is essential for understanding and maintaining diesel fuel injection
systems, which play a critical role in the efficient and reliable operation of
diesel engines.
Attendees: Vehicle mechanics, diesel apprentices and Diesel Fuel Injection Mechanics with
10 months experience.

Precondition: Participation in the following online courses is part of our training series
Trainings / live webcasts required: ESI[tronic] 2.0 in connection with KTS
Or Live Webcast ESI[tronic] Web Training Parts 1-3

Learning goals: 1.Understand the fundamental principles and components of diesel engine
operation, including the role of fuel injection systems.
2.Gain knowledge of diesel fuel properties and their impact on engine
performance and emissions.
3.Learn about different types of fuel injectors, injection timing, and common rail
systems used in diesel engines.
4.Develop the skills to troubleshoot and diagnose common issues in diesel
engines and adhere to essential safety protocols when working with these
systems..

Basic Diesel Engine Operation, Diesel Fuel Properties, Components of Fuel Injection,
Content: Systems, Injector Types, Injection Timing, Common Rail Systems, Fuel Pressure Control,
Injector Calibration, Troubleshooting and Diagnostics, Safety Protocols

Basic testing of CRI & CRIN injectors and pumps, adjusting of injection timing and
Practical:
diagnosing common diesel engine issues. Emphasis would also be placed on practicing
safety protocols while working with diesel engines and their components.

Miscellaneous: This course is designed to support your employees to understand the

fundamentals of diesel fuel injection

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

33
Diesel Injection
Diesel Fuel Injection for
Advanced Users Course number: 1 987 726 248
www.bosch-training-solutions.com

3 days Course Key: DIA

This training program provides comprehensive insights into diesel

fuel injection systems and equips participants with the skills and
knowledge required for efficient diagnostics and maintenance of
modern diesel engines. It combines theoretical understanding with
practical hands-on experience to ensure participants are well-
prepared to work in the diesel fuel injection field
Attendees: Vehicle electricians, vehicle mechanics and vehicle mechatronics
technicians' Basic knowledge of diesel vehicle technology

Precondition: Participation in the following online courses is part of our training series
Trainings / live webcasts required:
VDS engine management diesel
ESI[tronic] 2.0 web training part 1-3 (alternatively participation in 3-day face-
to-face training possible), sensors 1-3, OBD, low fuel pressure, HV instruction
in general (not applicable to HVT qualified participants)
Can be booked at www.bosch-training-solutions.com

Learning goals: Independent implementation of adjustment and maintenance work as well as

a targeted Diagnostics on diesel injection systems

Content: Basic diesel

Nozzle holder construction and testing with EPS100
Introduction to Electronic Diesel Control (EDC)
Structure, function and diagnosis of glow plug systems
Function of PDE (UIP) and system specifics

Common Rail basics

Function and design of polygon pumps (CP1, CP1H, CP3), rail pressure sen-
sor, Metering unit, pressure control valve and injectors with ball seat valve
Practical work on common rail systems using ESI[tronic] 2.0, KTS, FSA and
the individual service tools (e.g. Dieselset 1, Dieselset 3, return flow meter,
EPS100) for a targeted and therefore quick diagnosis /Troubleshooting on the
vehicle
Injector check on EPS118 or EPS205

Practical: Practical application of the knowledge imparted for diagnosis and repair work
on models and vehicles with diesel direct injection systems

Miscellaneous: This course is designed to support your employees to understand Common

Rail variants with practical work on these systems

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.
34
 Diesel Injection
Diesel injection for professionals
Course number: 1 987 726 249
www.bosch-training-solutions.com

3 days Course Key: DIP

This section of the training program dives deeper into advanced

common rail diesel systems, injector technologies, and diagnostic
procedures, ensuring that participants are well-equipped to handle
the complexities of modern diesel engine components and perform
precise diagnostics and adjustments
Attendees: Vehicle electricians, vehicle mechanics and vehicle mechatronics
technicians Basic knowledge of diesel vehicle technology

Precondition: Participation in the following online courses is part of our training series
Trainings / live webcasts required:
VDS engine management diesel
ESI[tronic] 2.0 web training part 1-3 (alternatively participation in 3-day face-
to-face training possible),
sensors 1-3, OBD, low fuel pressure, HV instruction in general (not applicable
to HVT qualified participants)
Can be booked at www.bosch-training-solutions.com

Learning goals: Implementation of adjustment and maintenance work as well as diagnosis of

the latest generations of Bosch Common Rail systems

Content: Common Rail system variants

CP4 with ZME or eSV
Piezo injectors CRI3
Pressure balanced injectors with VCA, VCC
Needle Closing Control NCC
IMA / ISA coding
Diagnostic functions such as volume comparison, compression test
Adaptations, settings and resets of adaptations with the KTS
after repair or replacement of components
Practical work:
Use of ESI[tronic] 2.0, KTS, FSA and the individual service tools (e.g. Diesel-
set 1, Dieselset 3, return flow meter) for targeted and therefore quick diagno-
sis/troubleshooting on the vehicle

Practical: Practical application of the knowledge imparted for diagnosis and repair work
on models and vehicles with diesel direct injection systems

Miscellaneous: This course is designed to support yor employees to understand Common

Rail variants with practical work on these systems

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.
35
Diesel Injection
Exhaust treatment of diesel cars
Course number: 1 987 726 250
www.bosch-training-solutions.com

3 days Course Key: EXD

This section of the training program provides insights into how

vehicles are modified to comply with increasingly stringent Euro x
emission standards. It covers both the theoretical aspects of
emission control and the practical modifications made to vehicle
systems to meet these standards.

Attendees: Vehicle electricians, vehicle mechanics and vehicle mechatronics

technicians Basic knowledge of diesel vehicle technology

Precondition: Specialist knowledge of the diesel injection course for professionals.

Safe handling of Bosch diagnostic devices and testing technology

Learning goals: Independent troubleshooting, repair and service on modern

Exhaust after treatment systems in passenger cars

Content: Exhaust gases and exhaust emission limits that meet Euro standards
Technical changes to vehicles with Euro 4,5,6 standards
(including high/low pressure exhaust gas recirculation, air system, NOx stor-
age catalytic converter, SCR system)

Features / Function / Diagnosis of various particle filter systems

(e.g. FAP installed in Citroen / Peugeot / Ford / etc.)

Features / Function / Diagnosis of DNOX systems generations 3.1

(e.g. installed in Mercedes, VW, BMW, Iveco) and 5.x (e.g. installed in Audi,
Mercedes, BMW)

AdBlue and its properties

Service-related work on vehicles with AdBlue
Testing of components and systems using KTS and ESI[tronic] in conjunction
with the Denoxtronic test case for targeted and therefore quick diagnosis/
troubleshooting on the vehicle.

Practical: Practical application of the knowledge imparted for diagnosis and repair work
on models and vehicles with diesel direct injection systems

Miscellaneous: This course is designed to support your employees to understand Exhaust

gases and Adblue variants with practical work on these systems.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

36
 Diesel Injection
High-pressure pump / common rail systems
Course number: 1 987 727 568
www.bosch-training-solutions.com

3 days Course Key: HPS

This training segment equips participants with the skills and

expertise needed to service and maintain Common Rail high-
pressure pumps effectively, ensuring the optimal performance of
these critical components in modern diesel engines.

Attendees: Vehicle electricians, vehicle mechanics and vehicle mechatronics

technicians with good knowledge and experience in the EP field

Precondition: Specialist knowledge of the course: Application injection pump test bench
EPS 815 or EPS 708

Learning goals: Carrying out all practical customer service work on Common Rail high-pres-
sure pumps of type CP1, CP1H, CP3

Expatiation of design, mode of operation of the Common Rail Polygon

high-pressure pumps CP1, CP1H and CP3.x
Special features to be observed when repairing the pumps
Repair of flange and housing at CP3
Testing and troubleshooting on the pump test benches EPS 708 and 815
Working with the Bosch QualityScan

Practical: Practical application of the knowledge imparted for using the correct tool &
repair proceduces Common Rail high-pressure pumps systems

Miscellaneous: This course is designed to support you or your employees to understand the
practical customer service workings on Common Rail high-pressure pumps of
type CP1, CP1H, CP3

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

37
Diesel Injection
Bosch CRI CRIN 1 & 2 stage repair & testing
Course number: 1 987 726 283
www.bosch-training-solutions.com

3 days Course Key: BCN

This training equips participants with the knowledge and skills

necessary to service and maintain CR injectors effectively, ensuring
the optimal functioning of these vital components.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians with

extensive
Knowledge and experience in the field of repair and testing of
diesel aggregates as well as the structure and function of common rail systems

Precondition: Specialist knowledge of the course: Application injection pump test bench
DCI 700 or EPS 708

Learning goals: Disassemble common rail injectors according to the existing damage patterns
assess and after repairs on the injection pump test stand
Check EPS 708 or DCI 700

Content: Functional principle MV injector

Differences in the main types of CRI and CRIN
Level 1 and 2 tools and their use
Test equipment for EPS 815, 708 and 205
DCI 700 Quick release device CRI / CRIN
848H
Dismantling, diagnosis and repair of CRI / CRIN according to level 1 and 2
Carrying out the exam for EPS 815, 708, 205 and assessing the test report
Test equipment and testing of CRI third parties (Denso, Delphi)
Working with the Bosch QualityScan
Events: see www.bosch-training-solutions.com
If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

38
 Diesel Injection
Bosch CRI 3rd stage repair & testing
Course number: 1 987 727 523
www.bosch-training-solutions.com

3 days Course Key: BI3

This training equips participants with advanced knowledge and

skills related to Bosch CR injectors, allowing them to perform more
complex injector repairs using the stage three repair kit.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians with

extensive knowledge and experience in the field of repair and testing
diesel aggregates as well as the structure and function of common rail systems
with 1st and 2nd stage

Precondition: Knowledge of stage 1 and 2 repairs

Learning goals: Participants can carry out a complete repair of a CRI / CRIN according to
stage 3 and use the tools correctly

Content: Type differences of the Bosch MV injectors

Explanation of the functional parameters armature lift, residual air gap, over-
travel, valve spring force, nozzle spring force and nozzle needle lift
Differences between level 3 and level 2 repairs
Explanation of the tools for level 3, in particular dial gauge, pneumatic unit,
Control unit, pressing device
Handling of the measuring adapter
Use of the repair software CRR 920 and the key software CRR 320

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

39
Diesel Injection
UI (Pump Nozzle) and Unit Pump UP for cars and
commercial vehicles Course number: 1 987 726 286
www.bosch-training-solutions.com

3 days Course Key: UIP

This training equips participants with the advanced knowledge and

practical skills needed to perform in-depth maintenance and repair
of unit injectors and unit pumps, ensuring that these components
meet performance standards in automotive applications.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians with

extensive
Knowledge and experience in the field of repair and testing of diesel aggregates

Precondition: Experience in handling the injection pump test bench EPS 815

Learning goals: Disassemble component UI from the pump-nozzle system and UP from the
pump-line-nozzle system for cars and commercial vehicles, assess them
based on the existing damage patterns and after repairs have been carried out
on the injection pump test bench EPS 815 with the use of the CAM Box, CAM
847

Content: Explanation of the structure and function of the unit injectors for cars / com-
mercial vehicles and unit pumps
Conversion of the EPS 815 with the necessary test equipment CAM 847 as
well as their useDismantling, diagnosis and repair of UI / UP
Nozzle replacement at UIN3
Examination of the UI / UP on the EPS 815 and explanation of the necessary
testing software
Dealing with technical documents for repair and testing
UI-P stage 3 (disassembling and measuring the solenoid valve)

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

40
 Diesel Injection
CP4 Testing
Course number: 1 987 726 242
www.bosch-training-solutions.com

2 days Course Key: CPT

By the end of this training segment, participants will be proficient in

testing CP4 high-pressure fuel pumps using the necessary
equipment and software.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians with

good knowledge and experience in the EP field

Precondition: Specialist knowledge from the application injection pump test bench course
EPS 815 or EPS 708

Learning goals: Participant can test a CP4 and knows the necessary test benches, tools and
the software

Content: Expatiation of design, function and special features of the CP4 pump
Presentation of the test kits for EPS 708 and EPS 815
Testing of the CP4 on the pump test benches EPS 708 and 815
Bosch QualityScan

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

41
Diesel Injection
Repair of the CP4 pump
Course number: 1 987 726 239
www.bosch-training-solutions.com

2 days Course Key: CPR

Upon completion of this training segment, participants will have the

skills and knowledge required to effectively repair CP4 high-pressure
fuel pumps and perform accurate testing to ensure their proper
functioning.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians with

extensive
Knowledge and experience in the field of repair and testing of
diesel aggregates as well as the structure and function of common rail systems

Precondition: Specialist knowledge of the course: Application injection pump test bench
EPS 815 or EPS 708

Learning goals: Participant can repair and test a CP4 and knows who to do it necessary test
benches, tools and the software

Content: Repair of the CP4 pump

Miscellaneous: The training course CP4 repair (1987726239) is available exclusively from
Bosch authorized concept partners (Bosch Diesel Centre / Bosch Diesel Ser-
vice) to disposal. We would be happy to inform you about the requirements
for entry into these workshop concepts.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

42
 Diesel Injection
VDO pump testing and repair
Course number: 1 987 726 203
www.bosch-training-solutions.com

2 days Course Key: VDO

With this training segment, participants will be well-equipped to

access critical information, repair VDO high-pressure pumps, and
perform assessments to maintain the functionality and reliability of
these components

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics technicians with

extensive knowledge and experience in the field of repair and testing of
diesel aggregates as well as the structure and function of common rail systems.

Precondition: Participants can operate the EPS945 test program on the EPS708 or EPS815

Learning goals: Participants can obtain information on the VDO extranet, differentiate be-
tween VDO high-pressure pumps, repair VDO high-pressure pumps and check
VDO high-pressure pumps for EPS 708 and 815

Content: Basic information about the DRS network

Rights and Obligations
Distribution
Product portfolio
Documentation (manuals, sales and service, information, VDO extranet)
Testing of different pumps for EPS 708 and EPS 815
Repair of various types of pumps
Documentation obligation

Miscellaneous: In order to get access to the testing software on EPS 708 / EPS 815 from the
VDO. This training is a requirement for the release of the software

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

43
Alternative
Drives
 Alternative Drives
Bosch high-voltage expert
We highly recommend the
participant to complete the
Bosch electronic specialist
1 987 726 163 framework which is found on
High-voltage technician (HVT1) page 58 of this document

The participants should have

already completed the General
high-voltage instruction (GHV)
found on page 12
1 987 726 167
High-voltage technician (HVT2)

1 978 727 896

Gasoline Injection Fundamentals

1 987 726 159 Theory 2 Days (Total course time 5 days)

High-voltage expert (HVE)

Live working (AuS)
Qualified person for work on live HV components, level 3E, part 1 (theory)

Requirement for practical on vehicle

+ Evidence of occupational medical check-up in the form of

a medical certificate

+ Valid first aid training including cardiopulmonary revival

1 987 726 159 Practical 3 Days (Total course time 5 days)

High-voltage expert (HVE)

Live working (AuS)
Qualified person for work on live HV components, level 3E, part 1 (theory)

Bosch high-voltage
expert
45
Alternative Drives
High-voltage technician
(HVT1) Course number: 1 987 726 163
www.bosch-training-solutions.com

Course Key: HVT1

4 days

The High-voltage technician (HVT1)

In order to qualify as a high-voltage technician (HVT1) or high-voltage specialist (1S or 1E)
for working on production vehicles with high-voltage systems. This is a trained person which
enables you to establish voltage-free state and de-energize HV systems. Working under
supervised voltage-free conditions. The training is based on DGUV Information 209-093,
Chapter 5, 5.1.4 i. In conjunction with Appendix 6, as of: 7 / 2021, Qualification as a high-
voltage technician (HVT1)
Attendees: Vehicle mechanics / vehicle electricians / vehicle mechatronics technicians or
mechanics
for body maintenance technology who completed their training after 2002 and
people with a corresponding additional training as vehicle service technicians or
masters
Precondition: We recommend the e-learning intensive training electrics (package),
Web-based training basics electrics 3-starter and basics electrics 4-generator.
Web-based training General High-voltage instruction (GHV)
Can be ordered at www.automotive-campus.com
Qualification as a high-voltage technician (HVT1) .
Can be ordered at www.bosch-training-solutions.com

Learning goals: Qualification as a high-voltage technician (HVT) or high-voltage specialist for work on
production vehicles with high-voltage systems level 2S.
This enables you to de-energize HV systems and to work on de-energized HV
components yourself and to instruct and supervise employees.
The training is based on the standards set by the Institutions of the
German accident insurance system. DGUV Information 209-093, Chapter 5,
5.1.4 i. In conjunction with Appendix 6, as of: 7 / 2021.

Content: Basic electrical knowledge Part I

Alternative drive types
Expatiation of design, function mode of operation of HV vehicles Safety
instructions
Protective measures against electrical shock and arcing
Electrical hazards and first aid
Definition of HV series vehicle
Specialist responsibility
Practical procedure when working on HV vehicles and systems
Instruction on HV series vehicle
Practical exercises and demonstrations

Miscellaneous: Graduation: Examination

For the course, you will receive the current manual for qualified electricians HV
systems from our trainer (included in the training price)

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are
enough registrations from interested parties.
46
 Alternative Drives
High-voltage technician
(HVT2) Course number: 1 987 726 167
www.bosch-training-solutions.com

Course Key: HVT2

4 days

The High-voltage technician (HVT2)

In order to qualify as a high-voltage technician (HVT2) or high-voltage specialist (2S or 2E)
for working on production vehicles with high-voltage systems. This training enables a
qualified person to work on high-voltage, free state and de-energize systems. The training is
based on DGUV Information 209-093, Chapter 5, 5.1.4 i. In conjunction with Appendix 6, as
of: 7 / 2021, Qualification as a high-voltage technician (HVT2)
Attendees: Vehicle mechanics / vehicle electricians / vehicle mechatronics technicians or mechanics
for body maintenance technology who completed their training after 2002 and people
with a corresponding additional training as vehicle service technicians or masters

Precondition: Only for participants who have already successfully completed the additional
qualification as high-voltage technician (GHV and HVT1) according to DGUV
Information 209-093, formerly (expert for HV intrinsically safe systems according to
DGUV Information 200-005).
Learning goals: Final qualification: Level 2E according to DGUV Information 209-093, Chapter
4, 4.1.4 i. In conjunction with Appendix 2, as of: 7 / 2021 for work in research,
development and production. This qualification, for electrical work on HV
systems in the De-energized state, on hybrid, electric vehicle conversions.
This enables you to switch off HV systems, to work on de-energized HV components
yourself and to instruct and supervise employees.

This is in accordance to the standards set by the Institutions of the German accident
insurance system.
Content: Basic Electrical Knowledge Part II
HV concepts in automotive engineering
Structure and mode of operation of the HV components such as:
• Energy storage and battery management of lithium-ion, nickel

Metal Hybrid Batteries and SuperCaps

• Inverter control and power electronics
• E-machine and power transmission
• Electric refrigerant compressor and PTC heater
• DC / DC converter
• Fuel cells
• Braking system

Electrical hazard
Protective measures against electrical shock and arcing faults
Organization of safety and health electrical work
Specialist and managerial responsibility, employee qualification
Practical procedure for working on non-HV intrinsically safe vehicles
Graduation: Examination

Miscellaneous: Graduation: Examination

For the course, you will receive the current manual for qualified electricians HVE sys-
tems from our trainer (included in the training price)

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are
enough registrations from interested parties.
47
Alternative Drives
High-voltage expert (HVE)
Course number: 1 987 726 159
www.bosch-training-solutions.com

Course Key: HVE

5 days

The High-voltage expert (HVE)

In order to qualify as a high-voltage expert (HVE) for working on production vehicles with
high-voltage systems. This is the final qualification: Level 3E or 3S, according to DGUV
Information 209-093, Chapter 4, 4.1.4 i. In conjunction with Appendix 2, as of: 7 / 2021 for
work in research, development and production. This special qualification, for electrical
work on HV systems in the energized live state, on hybrid, electric vehicle conversions with
individual operating permit §21 StVZO, or test vehicles and test benches, enables you to
switch HV systems. To replace components under voltage and work on HV components for
fault detection yourself and to instruct and supervise employees. The training is based on
DGUV Information 209-093, Chapter 5, 5.1.4 i. In conjunction with Appendix 6, as of: 7 /
2021, Qualification as a high-voltage expert (HVE)
Attendees: Vehicle mechanics / vehicle electricians / vehicle mechatronics technicians or
mechanics
for body maintenance technology who completed their training after 2002 and
people with a corresponding additional training as vehicle service technicians or
masters
Precondition: We recommend the e-learning intensive training electrics (package),
Web-based training basics electrics 3-starter and basics electrics 4-generator.
Completed and passed the High-voltage technician (HVT2)
Can be ordered at www.automotive-campus.com
Qualification as a high-voltage expert (HVE) .
Can be ordered at www.bosch-training-solutions.com

Learning goals: Qualification as a high-voltage expert (HVE) or high-voltage specialist for work on production
vehicles with high-voltage systems level 3S or 3E.
This enables you to energized HV systems and to work on de-energized HV components
yourself and to instruct and supervise employees.
The training is based on the standards set by the Institutions of the German
accident insurance system. DGUV Information 209-093, Chapter 5, 5.1.4 i. In
conjunction with Appendix 6, as of: 7 / 2021.

Content: Basic electrical knowledge Part I Alternative drive

types
Expatiation of design, function mode of operation of HV vehicles Safety instructions
Protective measures against electrical shock and arcing Electrical hazards and
first aid
Definition of HV series vehicle Specialist
responsibility
Practical procedure when working on HV vehicles and systems Instruction on HV
series vehicle
Practical exercises and demonstrations

Miscellaneous: Graduation: Examination

For the course, you will receive the current manual for qualified electricians HV
systems from our trainer (included in the training price)

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are
enough registrations from interested parties.
48
 Alternative Drives
Hybrid & Electric Vehicle
Course number: 1 987 726 169
www.bosch-training-solutions.com

Course Key: HYB

4 days

The Bosch hybrid and electric automotive systems

The Bosch Hybrid and Electric automotive systems course covers the
principles and functionalities of hybrid and electric systems in vehicles.
Students learn about power management, battery technologies, and
electric propulsion, preparing them for modern automotive technology and
sustainable practices.
Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-
cians, body and Vehicle builders with completed vocational training

Learning goals: Targeted fault diagnosis on alternators and on-board power systems.
Independent implementation of testing and repair work in the vehicle
on the systems mentioned. Dealing with workshop documents (ES-
I[tronic], CAS[plus] and SIS) using measurement technology from KTS
and FSA
Content: Bosch alternator design and their working methods.
Alternator Electromagnetic induction and operations.
Construction and testing of modern alternator types and their charac-
teristics.
Alternator designs, designations and rectification.
Function, structure, communications and testing of alternators.
Compact alternators including Baseline, Efficiency Line and Power
Density Line.
Function and structure of smart charge and intelligent alternator con-
trol.
Alternator parts listing, component instructions, checking and repair-
ing.
Alternator voltage regulator and transistor operations.
Alternator with multifunctional regulation and IC function and opera-
tions.
Alternator terminal plug markings and pin identifications
Dynamic idle control and recuperation.
Practical exercises on electrical charging systems.
Common charging system faults, fault finding and troubleshooting
procedures.
Service and testing of the alternators, diagnosing errors and charging
systems with targeted use of ESI[tronic], KTS, FSA.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

49
Body, comfort and
driver assistance
systems
 Body, comfort and driver
assistance systems
Networking in the motor vehicle Course number: 1 987 727 790
www.bosch-training-solutions.com

Course Key: CAN

4 days

The CAN DATA BUS networking communication systems

The Networking in motor vehicle CAN-Bus systems course explores the principles
and applications of CAN technology in automotive networks. Participants learn
about data communication protocols, network topologies, and diagnostic
procedures, gaining practical insights into integration and troubleshooting. The
course emphasizes efficient data transmission and system reliability, preparing
students for modern automotive electronic communication and networking.
Attendees: Vehicle mechanics with knowledge in the field of vehicle electrics /
electronics. Vehicle mechatronics technicians, vehicle electricians,
bodywork and vehicle manufacturers, master mechanic
Precondition:

Learning goals: Getting to know the structure and functions of the networked systems
in the vehicle and their testing options

Content: Structure and differences of the various bus

system's Basic structure of the CAN data bus
Basic structure of the LIN data bus
Basic structure of the MOST data bus
Basic structure of the Flex-Ray data bus
Creation of a network topology via ESI[tronic]
Evaluate error patterns
Showing the measurement possibilities

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

51
Body, comfort and driver
assistance systems
Airbag and belt tensioners Course number: 1 987 727 727
www.bosch-training-solutions.com

Course Key: ABT

4 days

The vehicle airbag and seat belt tensioners

The airbag and belt tensioners course explores the principles and functionalities of
safety systems in vehicles. Participants learn about airbag deployment, belt tensioners,
and crash sensor integration, gaining practical insights into their operation. The course
emphasizes maintenance and diagnostic techniques for modern automotive safety
standards.

Attendees: Employees from vehicle and body shops,

The prerequisite is a completed vocational training in a motor vehicle technical
profession

Learning goals: Modern safety technology in motor vehicles such as belt tensioners and airbags works
with detonators. The detonators are pyrotechnic sys- tems and are therefore subject the
Explosives Act. Persons who carry out assembly work on such systems require a
corresponding certificate of competence. The course imparts the specialist knowledge
required by law

Content: Excerpts from the Explosives Act: Legal provisions on handling, storage and
disposal
Differentiation between the different restraint systems: belt tensioners and airbags
Adherence to safety precautions when removing belt tensioners Airbag
systems: Structure and function of the gas generators Functionality of the
individual components and their verification Safety regulations when
dismantling system components
Head and side airbag systems
Diagnostic options

Miscellaneous: Written final test. Expertise in airbags

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are
enough registrations from interested parties.

52
 Body, comfort and driver
assistance systems
LED headlights check and adjust properly Course number: 1 987 727 807
www.bosch-training-solutions.com

Course Key: LED

1 days

The LED Headlight in modern vehicles

The headlight adjustment and checks for LED headlights course
provides comprehensive guidance on setting up and inspecting LED
headlight systems. Students learn about alignment, beam pattern
adjustments, and diagnostic procedures, ensuring compliance with
safety regulations. The course emphasizes accurate adjustments and
thorough checks for optimal performance.
Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-
cians,body and Vehicle builders, master car mechanics with very good
knowledge.
Learning goals: Knowledge transfer of current LED light control systems.
Independent execution of testing, maintenance and repair work mod-
ern lighting systems in vehicles
Content: Overview of current LED lighting systems
Safety regulations
Structure and function of:
• Dynamic and static high-beam assistant
• LED lighting technology from different vehicle manufacturers
• Matrix light, multibeam, active LED, etc.
• Headlight range adjustment
Dynamic lighting systems such as city, country road, highway and
bad weather light
Directive-compliant headlight test according to Appendix 4, § 29 StVZO
HU headlight test guideline
Bosch light adjustment device HTD 815
System diagnosis with the KTS and Bosch testing technology
Repair options
Developing diagnostic strategies and recognizing diagnostic options
on vehicles with modern lighting technology

Miscellaneous: Written final test.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

53
Body, comfort and driver
assistance systems
Body and comfort electronics Course number: 1 987 727 813
www.bosch-training-solutions.com

Course Key: BCE

3 days

The body and comfort vehicle electronics

The body and comfort electronics course explores electronic systems
enhancing vehicle comfort and functionality, including communication
methods like CAN and LIN. Students learn about integrating
components for climate control, entertainment, and lighting systems,
preparing them for modern automotive electronic technology.
Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-
cians,body and Vehicle builders, master car mechanics with very good
knowledge.
Precondition: Specialist knowledge of the ESI[tronic] course and Bosch tester appli-
cation
Learning goals: Independent implementation of diagnostic and repair work on the vari-
ous body and comfort electronics systems

Content: Vehicle networking: LIN, CAN, BSS, SENT, MOST, FlexRay

Onboard power supply control, central electronics
Driver assistance systems, structure, function and adjustment of indi-
vidual systems with Bosch adjustment tools e.g. B. DAS 3000 or SCT
415, SCT 815 Modern lighting systems, e.g. B. LED, matrix and multi
beam. Correct setting of common high beam assistants
Correct handling of different tire pressure monitoring systems
Pass-Thru ECU Programming. Practical demonstration on the vehicle
Configuring control devices
Connectivity
Practical work and troubleshooting on the systems mentioned
Use of ESI[tronic], KTS and FSA

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

54
 Body, comfort and driver
assistance systems
Modern driver assistance systems in passenger Course number: 1 987 726 013
www.bosch-training-solutions.com
cars Adjustment of radar sensors, front, rear and
Course Key: MDA
surroundings cameras
2 days

Modern driver assistance systems in passenger cars and adjustment of

sensors and cameras
The modern driver assistance systems course explores advanced
technologies supporting driver safety and convenience. Students learn
about adaptive cruise control, lane departure warning systems, and
automatic emergency braking, gaining practical insights into their
operation. The course emphasizes sensor integration and control systems
for contemporary automotive safety features.
Attendees: Employees from car and body shops, where the adjustment of driver
assistance systems with Bosch ADAS* tools such as e.g. B. DAS 1000
(VAS 6430) calibration set, DAS 3000, or SCT 815, 1415 / 415 / 417, or
for those who have an interest in it
Learning goals: Participants get to know the structure and function of modern driver
assistance systems and their sensors in theory and practice. You will
be able to calibrate and adjust different sensors from several vehicle
manufacturers using the appropriate Bosch FAS* tools

Content: Overview of the structure, networking and function of common driver

assistance systems and sensors in modern cars.
Explanation of the differences between static and dynamic calibrations
of cameras and sensors.
Practical examples of static and dynamic radar included with camera
calibrations on vehicles such as
BMW, Mercedes, Opel, Nissan etc. with all Bosch FAS* tools, DAS
1000, DAS 3000, SCT 815, 1415 / 415
Adjusting cameras and radar sensors according to OEM specifications
from Volkswagen and the DAS 1000 calibration set (VAS 6430) Calibra-
tion of rear and surroundings cameras as well as rear radars of e.g. VW,
Mercedes, Toyota
Miscellaneous: We recommend our DAS 1000 live webcast to participants who are only
interested in the Bosch DAS 1000 calibration set
This training does not include any practical driving tests of driver assis-
tance systems on public roads or on closed terrain
Events: see www.bosch-training-solutions.com
If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

55
Body, comfort and driver
assistance systems
DAS 3000 calibration set – practical training Course number: 1 987 726 026
www.bosch-training-solutions.com
Adjustment of ACC and front camera
Course Key: DAS
1 days

The DAS 3000 calibration set and practical training

The practical calibration course for modern driver assistance systems offers
hands-on guidance on fine-tuning advanced technologies for vehicle safety
and convenience. Students learn to calibrate systems like adaptive cruise
control and lane-keeping assist, focusing on sensor technologies and
software adjustments for accurate performance in diverse driving conditions.
Attendees: Employees from vehicle and body shops, where the adjustment and
Cali- bration of driver assistance systems with the Bosch DAS 3000
calibra- tion set is carried out, or with those who are interested in it

Learning goals: Participants can adjust and calibrate front cameras and ACC sensors
using the DAS 3000 calibration set. He/she gets to know the structure,
the function and the application possibilities of the DAS 3000 calibra-
tion set in practice
Content: Presentation of the Bosch DAS 3000 calibration set including accesso-
ries and all possible uses
Carrying out adjustments and calibrations of front cameras and ACC
sensors according to manufacturer specifications
In combination and KTS with ESI[tronic] 2.0
Areas of application: General service work on the chassis, windscreen
replacement and accident repairs

Miscellaneous: Participants who are still interested in further ADAS* adjustments of

several vehicle manufacturers with various Bosch FAS* adjustment
tools, we recommend these participation in the two-day training course
Driver assistance systems in cars

This training does not include any practical driving tests of driver assis-
tance systems on public roads or on closed terrain

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

56
Electric &
Electronic
 Electric & Electronic
Bosch electronics specialist

ESI[tronic] 2.0 in connection with KTS 1 987 727 869

Live Webcast ESI[tronic] Web Training Parts 1-3 1 987 726 036

Basics of Electrics 1
Basics of Electrics 2 (Battery) 1 987 726 036
Basics of Electrics 3 (Starter)
Basics of Electrics 4 (Generator)

Live Webcasts
1 987 726 036
Sensors part 1-3

Vehicle electronics 1 1 987 727 520

Vehicle electronics 2 1 987 727 521

Live Webcasts
1 987 726 036
Driver assistance systems in cars (ADAS)

Practical training in modern automotive electronics systems

1 987 727 522
and driver assistance systems

On-board networks and electrical systems in cars 1 987 727 502

Bosch electronics specialist

Customer
Relations
Bosch system technician
Program

+
Bosch high-vol- Bosch diesel Bosch electro- Bosch brakes Bosch gasoline
tage expert / specialist nics specialist specialist specialist
High voltage
expert

59
Electric & Electronic
Vehicle electronics 1
Course number: 1 987 727 520
www.bosch-training-solutions.com
4 days
Course Key: VE1

Vehicle electronics level one was designed for basic automotive

electronic systems
The Vehicle Electronics 1, basic automotive electronics course covers
fundamental principles and components of automotive electronic systems,
emphasizing circuits, sensors, and actuators. Participants learn about
electronic control units and diagnostic procedures, preparing them for
modern automotive electronic technology.
Attendees: Motor vehicle mechanics, motor vehicle electricians, motor vehicle mechatronics
technicians and their tasks maintenance and repair of electronic systems

Precondition: ESI[tronic] 2.0 in connection with KTS (3xx / 5xx / 6xx / 8xx / 9xx / ESI-Online)
and e-learning WBT electrics 1 - 4 worked on and passed successfully, as well as
live webcast sensors 1 - 3.
In this way, the functioning of circuits and assemblies should be worked out in
a logical conclusion. This logical linking of individual results to a whole leads to
faster success when troubleshooting in the vehicle
Learning goals: The learning objective of the EK series is in particular to understand the meas-
ured values / to correlate measurement results

Content: Structure of the measuring station

Basics of electrical engineering
Measurement technology
Electronic components
Practical measurements of sensors
Possible uses of the oscilloscope
Calculation of electrical circuits
Construction of measuring devices
Measurement exercises on electronic circuits
Measurement exercises on models and sensors with workshop test equipment
Basics of semiconductor technology, sensors in vehicles, diodes,
Transistors, test circuits
Bipolar transistors
Miscellaneous: The registration for vehicle electronics 1 automatically includes the registration
and booking for the follow-up appointments vehicle electronics 2 and practi-
cal training on modern vehicle electronics and driver assistance systems of the
respective series and is carried out by the Automotive Campus team, individual
bookings are not possible.

The training in vehicle electronics 1 – 2 and practical training on modern vehicle

electronics and driver assistance systems is part of the Bosch electronics system
specialist training

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are
enough registrations from interested parties.

60
 Electric & Electronic
Vehicle electronics 2
Course number: 1 987 727 521
www.bosch-training-solutions.com
4 days
Course Key: VE2

Vehicle electronics level two was designed for intermediate automotive

electronic systems
The Vehicle Electronics 2, intermediate automotive electronics course provides
an in-depth exploration of advanced automotive electronic systems. Participants
delve into the complexities of control protocols, network architectures, and
diagnostic strategies, gaining practical insights into their application in vehicle
operations. The course emphasizes the integration of electronic components
and the utilization of advanced diagnostic tools, preparing students to tackle
the intricacies of modern automotive electronics and system management.

Attendees: Participants from vehicle electronics 1 of the booked series

Precondition: Participation in the vehicle electronics course 1

Learning goals: Characteristic values of semiconductor components are independent-

ly developed through measurement exercises. Determination of the
most important properties of basic electronic circuits through meas-
urements and experiments. Independent testing and assessment of
electronic switching and control devices at the measuring station. The
measurement results in logical contexts set to facilitate troubleshoot-
ing on the vehicle.
Content: Radio transmission
Current-controlled activation of actuators
Construction of amplifier circuits
Structure of field effect transistors
Work out the properties of inductances
The function and effect of the components is determined by
Measurement exercises developed at the measuring station
Measurement exercises on control units with troubleshooting
Basics of digital technology
Contactless transmission options
Construction of circuits with operational amplifiers
Building a DC/DC converter
Miscellaneous: The registration for vehicle electronics 2 of the respective series is car-
ried out by the automotive Campus team made automatically when reg-
istering for vehicle electronics 1, individual bookings are not possible

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

61
Electric & Electronic
Practical training on modern automotive
electronics and driver assistance systems Course number: 1 987 727 522
www.bosch-training-solutions.com

Course Key: PAS

4 days

The modern automotive electronic and driver assistance systems

The Practical training on modern automotive electronics and driver
assistance systems course provides hands-on guidance on advanced
electronic systems and driver assistance technologies. Participants learn
about integration, calibration, and practical application of diagnostic tools,
preparing them for contemporary automotive technology.

Attendees: Participants from vehicle electronics 1 and 2 of the booked series

Precondition: Participation in vehicle electronics 1 and 2.

Participation in the webcast driver assistance systems in cars - calibration
with the Bosch DAS 3000 (ADAS)

Learning goals: Development of networking in the motor vehicle with error images and diag-
nosis With content from vehicle electronics 1 and 2, strategies for fault diag-
nosis with FSA, KTS and ESI[tronic] are implemented. Troubleshooting and
adjustment of assistance systems are carried out independently

Content: CAN data bus basics

Structure of a schematic network at the measuring station
Adjustment and calibration of assistance systems
Efficient troubleshooting of vehicle electrics and electronics

Practical work:
Construction of circuits and testing with the oscilloscope and measuring de-
vices at the measuring station
Measurements with the oscilloscope in the vehicle
Measurement and troubleshooting on the CAN data bus
Adjustment and calibration of assistance systems with Bosch adjustment tool
Record and analyze electrical signals on the vehicle
Assess actuators and sensors based on their signals
Develop systematic troubleshooting of electronic systems on the vehicle

Miscellaneous: The registration for vehicle electronics 2 of the respective series is carried out
by the automotive Campus team made automatically when registering for vehi-
cle electronics 1, individual bookings are not possible

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

62
 Electric & Electronic
Bosch electrical systems in vehicles
Course number: 1 987 727 502
www.bosch-training-solutions.com

4 days Course Key: BES

The Bosch electrical training covers all the aspects of automotive

electrical systems
The Bosch Automotive Electrical systems in passenger vehicle course
covers charging systems, ignition systems, and lighting components in
vehicles, emphasizing maintenance and diagnostic techniques. Students
learn about the complexities of modern automotive electrical systems,
preparing them for practical integration in passenger cars.

Attendees: For vehicle mechanics, car electricians, car mechatronics, body and
vehicle builders
Precondition: Basics of Electrics 1-4

Learning goals: Targeted fault diagnosis on starter, generator and on-board power sys-
tems. Independent implementation of testing and repair work in the
vehicle on the systems mentioned. Dealing with workshop documents
(ESI[tronic], CAS[plus] and SIS) using measurement technology from KTS
and FSA
Content: Construction and testing of modern AGM, EFB and Gel batteries
Use of Bosch battery chargers and testers
Function, structure and testing of three-phase generators and their control
Function and structure of start-stop systems
Structure and function of starters and starter control on modern vehicles
with troubleshooting
Practical exercises on electrical battery management and on-board
charging systems
Battery management systems from various manufacturers from older
years to the latest systems
Service and testing work, changing the battery, diagnosing errors
in battery management and start-stop systems with targeted use of
ESI[tronic], KTS, FSA
Design and functionality of modern 48 volt vehicle electrical systems

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

63
Electric & Electronic
Batteries Advanced
Course number: 1 987 727 705
www.bosch-training-solutions.com
2 days
Course Key: BAS

The advanced battery training covers all the aspects of automotive

batteries
The Bosch Advanced Battery training course covers all aspects of
automotive batteries, including technologies, management, and
maintenance. Students gain practical insights into charging, diagnostics,
and sustainable practices, preparing them for modern automotive battery
technology.
Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-
cians, body and Vehicle builders with completed vocational training

Precondition: Basics of Electrics 2 (Battery)

Learning goals: Targeted fault diagnosis on battery systems. Independent implementa-

tion of testing and repair work in the vehicle on the systems mentioned.
Dealing with workshop documents (ESI[tronic], CAS[plus] and SIS)
using measurement technology from KTS and FSA.

Content: Bosch battery design and their working methods.

Battery technology and product features.
Construction and testing of modern AGM, EFB and Gel batteries.
Use of Bosch battery testers and chargers.
Function, structure and testing of batteries.
Function and structure of start-stop systems.
Electronic battery sensors and their operations.
Practical exercises on electrical battery management systems.
Battery management systems from various manufacturers from older
years to the latest systems
Service and testing of the battery, diagnosing errors in battery manage-
ment and start-stop systems with targeted use of ESI[tronic], KTS, FSA.

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

64
 Electric & Electronic
Starter Motor Advanced
Course number: 1 987 727 529
www.bosch-training-solutions.com
2 days
Course Key: STR

The advanced starter motor training covers all the aspects of automotive
starting systems
The Bosch Advanced Starter motor training covers all aspects of
automotive starting systems, focusing on technologies, diagnostics, and
maintenance. Students gain practical insights into system components and
their integration, preparing them for modern automotive starting systems.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-

cians, body and Vehicle builders with completed vocational training
Precondition: Basics of Electrics 3 (Starter Motors)

Learning goals: Targeted fault diagnosis on starter and on-board power systems. Inde-
pendent implementation of testing and repair work in the vehicle on the
systems mentioned. Dealing with workshop documents (ESI[tronic],
CAS[plus] and SIS) using measurement technology from KTS and FSA

Content: Bosch starter motor design and their working methods.

Starter technology and product features.
Construction and testing of modern stater types and their
characteristics.
Starter motor designations and operating principles.
Function, structure and testing of stater motors.
Function and structure of start-stop systems.
Starter parts listing, component instructions, checking and repairing.
Practical exercises on electrical starting systems.
Common starter system faults, fault finding and troubleshooting
procedures.
Service and testing of the starter motors, diagnosing errors and start-
stop systems with targeted use of ESI[tronic], KTS, FSA.

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

65
Electric & Electronic
Alternator Advanced
Course number: 1 987 727 518
www.bosch-training-solutions.com

Course Key: AAS

2 days

The advanced alternator training covers all the aspects of automotive

charging systems
The Bosch Advanced Alternator training covers all aspects of automotive
charging systems, focusing on technologies, diagnostics, and maintenance.
Students gain practical insights into system components and their
integration, preparing them for modern automotive charging systems.
Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-
cians, body and Vehicle builders with completed vocational training

Learning goals: Targeted fault diagnosis on alternators and on-board power systems.
Independent implementation of testing and repair work in the vehicle
on the systems mentioned. Dealing with workshop documents (ES-
I[tronic], CAS[plus] and SIS) using measurement technology from KTS
and FSA

Content: Bosch alternator design and their working methods.

Alternator Electromagnetic induction and operations.
Construction and testing of modern alternator types and their charac-
teristics.
Alternator designs, designations and rectification.
Function, structure, communications and testing of alternators.
Compact alternators including Baseline, Efficiency Line and Power
Density Line.
Function and structure of smart charge and intelligent alternator con-
trol.
Alternator parts listing, component instructions, checking and repair-
ing.
Alternator voltage regulator and transistor operations.
Alternator with multifunctional regulation and IC function and opera-
tions.
Alternator terminal plug markings and pin identifications
Dynamic idle control and recuperation.
Practical exercises on electrical charging systems.
Common charging system faults, fault finding and troubleshooting
procedures.
Service and testing of the alternators, diagnosing errors and charging
systems with targeted use of ESI[tronic], KTS, FSA.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

66
 Electric & Electronic
Measuring, testing sensors
Course number: 1 987 726 257
www.bosch-training-solutions.com

3 days Course Key: MTS

The sensor training covers all the aspects of testing automotive

sensors
The precise measurement and testing of sensors in automotive
vehicles are crucial for ensuring optimal performance and safety. In
this context, comprehensive and reliable testing procedures are
indispensable for guaranteeing the reliability and functionality of these
sensors in diverse driving conditions, thereby upholding the standards
of modern automotive systems.
Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-
cians, body and Vehicle builders with completed vocational training

Precondition: Specialist knowledge of the ESI[tronic] course

Learning goals: The vehicle sensor course focuses on imparting an in-depth

understanding of sensor principles and applications in automotive
systems. Students learn to integrate sensor data into control systems,
troubleshoot sensor issues, and design sensor-based systems for modern
automotive applications.

Content: Summary of diagnostics with measuring devices such as:

• Multimeter (multimeter)
• Motor tester FSA 500 / 7xx and KTS
Dealing with electrical circuit diagrams
Sensors of the following systems:
• various Motronic systems
• various EDC systems
• Braking systems
• Comfort systems
• Assistance systems
Explanation and assessment of various output and input signals
Independent work with ESI[tronic], KTS, multimeter and FSA motor
tester

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

67
Chassis
and braking
 Chassis and braking
Bosch brakes specialist

ESI[tronic] 2.0 in connection with KTS 1 987 727 869

Live Webcast ESI[tronic] Web Training Parts 1-3 1 987 726 036

Conventional braking systems 1 987 727 925

Anti-lock braking systems (ABS) 1 987 727 890

VDS ABS / ESP system 1 987 727 903

Live Webcasts
Sensors part 1-3 1 987 726 036
General High Voltage Instruction (not applicable if proof of HVT)

Driver Safety Systems ABS & ESP by Bosch 1 987 726 351

Bosch brakes specialist

Customer
Relations
Bosch system technician
Program

+
Bosch high-vol- Bosch diesel Bosch electro- Bosch brakes Bosch gasoline
tage expert / specialist nics specialist specialist specialist
High voltage
expert

69
Chassis and braking
Conventional Braking Systems
Course number: 1 987 727 925
www.bosch-training-solutions.com

Course Key: CBS

3 days

Driver conventional safety system training for braking systems

Conventional braking systems are fundamental for automotive
safety, utilizing friction to convert kinetic energy into heat, thereby
controlling vehicle speed. Comprised of key components like brake
pads, rotors, and calipers, these systems enable precise
deceleration and reliable control in various driving conditions,
highlighting their critical role in ensuring vehicle safety.

Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics techni-

cians, body and Vehicle builders with completed vocational training

Precondition: As part of our training series, participation in the following online train-
ing courses / live webcasts is required:
ESI[tronic] 2.0 web training part 1-3 (alternatively participation in 3-day
face-to-face training possible

Learning goals: Learners will gain an understanding fundamental principles and

components, as well as developing skills in assessment,
maintenance, and troubleshooting. Students will gain proficiency in
system dynamics and maintenance strategies, preparing them for
real-world automotive applications.

Content: The course on conventional brake systems covers fundamental

principles, components, and maintenance techniques, emphasizing
system dynamics and safety measures for practical automotive
applications.

Miscellaneous: Written final test.

see www.bosch-training-solutions.com
Events: If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

70
 Chassis and braking
Driver Safety Systems ABS & ESP by Bosch
Course number: 1 987 726 351
www.bosch-training-solutions.com
3 days
Course Key: ABS

Driver safety system training for antilock braking and electronic

stability programs
The Driver Safety Systems ABS & ESP course covers the principles,
components, and operation of these crucial safety systems,
emphasizing their role in enhancing vehicle stability and control in
challenging driving scenarios. Students learn to assess, maintain,
and diagnose these systems to ensure optimal driver safety.
Attendees: Vehicle mechanics, vehicle electricians, vehicle mechatronics
technicians, body and Vehicle builders with completed vocational
training
Precondition: As part of our training series, participation in the following online train-
ing courses / live webcasts is required:
ESI[tronic] 2.0 web training part 1-3 (alternatively participation in 3-day
face-to-face training possible), sensors 1-3, HV instruction in general
(not applicable for HVT qualified participants)
WBT anti-lock braking system (ABS) and VDS ABS / ESP system

Learning goals: Participants will be able to carry out systematic troubleshooting on

Bosch ABS / ESP systems in practice. You will recognize the complex
relationships and similarities between the various driver assistance
systems
Content: Fundamentals of driving physics in relation to ABS / ASR / ESP systems
Structure and function of Bosch ABS and ESP systems
e.g. B. ABS 8, ABS 9, ESP 8 and ESP 9
Diagnosis on sensors such as B. wheel speed sensor, yaw rate, lateral
acceleration, steering angle sensors
Getting to know modern brake systems in hybrid and electric vehicles
to learn how to use them safely in the workshop, e.g. B. when carrying
out service work
Practical work using ESI[tronic] 2.0, KTS and FSA for Targeted and
therefore fast diagnosis / troubleshooting on the vehicle

Miscellaneous: For the perfect complement, we recommend attending the training

courses:

1987726013 Modern driver assistance systems in cars Adjustment of

radar sensors, front, rear and surroundings cameras

1987726163 High-voltage technician (HVT) Qualified person high-volt-

age

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

71
Chassis and braking
Direct shift gearbox (DSG) with wet and dry clutch
Course number: 1 987 726 302
www.bosch-training-solutions.com
2 days Course Key: DSG

The direct shift gearbox training covers the wet and dry clutch
assembly
The Direct Shift Gearbox (DSG) short course offers comprehensive
insights into the operational principles and maintenance of this
advanced transmission system, preparing students for the
intricacies of modern automotive engineering.
Attendees: Vehicle electricians, vehicle mechanics and vehicle mechatronics
technicians
Precondition: Get to know the understanding of the different double clutch transmis-
sions for efficient damage diagnosis and carry out the maintenance and
repair of the double clutch according to the manufacturer's specifica-
tions

Learning goals: The learning goals for the DSG course revolve around providing
students with a comprehensive understanding of the operational
principles, components, and maintenance of Direct Shift Gearbox
(DSG) systems. Students will develop the necessary skills to
assess, diagnose, and effectively maintain DSG transmissions,
enabling them to handle the complexities of contemporary
automotive engineering and transmission technology.

Content: Construction and differences of the different transmission generations

Functions and tasks of the built-in sensors and actuators
Sequence of the individual switching operations
Procedure for removing and installing the dry dual clutch
Evaluation and interpretation of the control unit diagnostic data
Gear oil service wet multi-plate clutch, procedure according to manu-
facturer's specifications
Basic settings for wet and dry clutches

Miscellaneous: Implementation is carried out by external service providers

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

72
 Chassis and braking
Diagnosis and service on
automatic transmissions Course number: 1 987 726 303
www.bosch-training-solutions.com

Course Key: DAT

1 days

The diagnosis and service on automotive transmission systems

The automatic gearboxes course provides an in-depth
understanding of transmission systems, including torque
converters, gear sets, and hydraulic circuits. Students gain practical
insights into design, operation, and maintenance, preparing them
for modern automotive engineering challenges.
Attendees: Vehicle electricians, vehicle mechanics and vehicle mechatronics
technicians
Precondition: Get to know the understanding of the different transmissions for
efficient damage diagnosis and carry out the maintenance and repair of
the automatic transmissions according to the manufacturer's specifica-
tions

Learning goals: Obtain the necessary specialist knowledge to diagnose and correctly
carry out a transmission service on automatic or automated manual
transmissions

Content: Basics of automatic transmissions

Special features of various automatic transmissions
Incoming check
Identify error patterns
Troubleshooting the installed gearbox
Possible sources of error in the gearbox environment
Practical work on the vehicle
Differences in transmission oil change versus flushing
Test drive and adaptation drive

Miscellaneous: A theory test will be carried out at the end of the course.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

73
Maintenance and
Service
 Maintenance and Service
Bosch Vehicle Service
Course number: 1 987 727 570
www.bosch-training-solutions.com

Course Key: BVS

4 days

Bosch automotive mechanical systems

The automotive mechanics course covers vehicle maintenance and
repair, focusing on engines, transmissions, and electrical
components. Participants gain practical skills in diagnosis and
resolution of mechanical issues, preparing them for the challenges
of modern automotive technology and repair practices.
Attendees: Vehicle electricians, vehicle mechanics and vehicle mechatronics
technicians

Learning goals: The development practical skills in diagnosing and resolving various
mechanical issues, preparing the individual for the complexities of
contemporary automotive technology and repair techniques.

Content: Key safety aspects

Maintenance schedules
Engine Lubrication
Engine Cooling
Overview and diagnostic options of
internal combustion engines
Different types of vehicle suspensions
Vehicle steering geometry
Modern vehicle tire design and diagnosis

Miscellaneous: A theory test will be carried out at the end of the course.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

75
 Truck

74
 Truck
Efficient use of KTS Truck and ESI[tronic] 2.0
with Trailer Plugs Course number: 1 987 726 212
www.bosch-training-solutions.com

3 days Course Key: TKT

Bosch truck diagnostics with the use of the ESI[tronic] 2.0 with trailer
systems
Upon completion of this training, participants will be well-versed in
various diagnostic aspects, including control unit diagnostics, trailer
brake systems, and advanced tester functions
Attendees: Employees from motor vehicle and commercial vehicle companies with
a focus on light and heavy commercial vehicles

Learning goals: Targeted application of the KTS truck with the ESI[tronic] truck.
Participants also receive authorization for the personal trailer PIN
(PIN2) of the ESI[tronic] truck. With the PIN you are able to inde-
pendently

Carry out parameterization on the trailer brake system. Furthermore,

you are authorized to convert original manufacturer data sets and set
up additional functions

Content: Explanation of the equipment and possible uses of the ESI[tronic]

Truck diagnosis
Application of component tests, wiring and maintenance schedules
Connection variants on different vehicles
Control unit diagnosis options
Extended tester functions such as e.g. B. IMA coding on the injector
and calibration of level sensors on the chassis

Trailers:
Structure of an electronic trailer brake system
Determination and special features of the different modulator types
and manufacturers
Establishing a connection and putting it into operation on various
trailer brake modules
Save and upload ALB shield and modulator record
Conversion of a manufacturer data record into the KTS truck format
Preparation and execution of the end of line test
No system training on specific vehicle systems.
The training includes practical work on vehicles, trailers and models

Miscellaneous: At the end of this training, the participants are authorized to work with
the trailer PIN (PIN2) in the extended mode (trailer) of the ESI[tronic]
Truck and to convert data sets independently.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

77
Truck
Trailer PIN authorization
Course number: 1 987 726 213
www.bosch-training-solutions.com

Course Key: TIN

1 days

Bosch truck diagnostics with the advanced use of trailer systems

Upon completing this training, participants will be well-prepared to
handle electronic trailer brake systems, troubleshoot issues, manage
data effectively, and ensure the safety and functionality of trailer
brake modules across different types and models.
Attendees: Employees from motor vehicle and commercial vehicle companies with
a focus on light and heavy commercial vehicles

Learning goals: Targeted application of the KTS truck with the ESI[tronic] truck.
Participants also receive authorization for the personal trailer PIN
(PIN2) of the ESI[tronic] truck. With the PIN you are able to inde-
pendently

Carry out parameterization on the trailer brake system. Furthermore,

you are authorized to convert original manufacturer data sets and
set up additional functions
Content: Explanation of the equipment and possible uses of the ESI[tronic]

Truck diagnosis
Application of component tests, wiring and maintenance schedules
Connection variants on different vehicles
Control unit diagnosis options
Extended tester functions such as e.g. B. IMA coding on the injector
and calibration of level sensors on the chassis

Trailers:
Structure of an electronic trailer brake system
Determination and special features of the different modulator types
and manufacturers
Establishing a connection and putting it into operation on various
trailer brake modules
Save and upload ALB shield and modulator record
Conversion of a manufacturer data record into the KTS truck format
Preparation and execution of the end of line test
No system training on specific vehicle systems.
The training includes practical work on vehicles, trailers and models

Miscellaneous: At the end of this training, the participants are authorized to work with
the trailer PIN (PIN2) in the extended mode (trailer) of the ESI[tronic]
Truck and to convert data sets independently.

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.
78
 Truck
Electrics / electronics and comfort systems in
commercial vehicles Course number: 1 987 727 865
www.bosch-training-solutions.com

2 days Course Key: TES

The electrical and electronic comfort systems in commercial vehicles

The Electrics/Electronics and comfort systems in commercial vehicles course
provides comprehensive insights into the electrical and electronic
components of commercial vehicles. The course emphasizes the importance
of reliable system functionality and efficient maintenance practices, equipping
students to handle the complexities of modern commercial vehicle
technology and comfort system management.

Attendees: Employees from motor vehicle and commercial vehicle companies with
a focus on light and heavy commercial vehicles

Precondition: Basic knowledge in the fields of electrics / electronics

Learning goals: Independent implementation of diagnostic and repair work on the vari-
ous systems of electrics / electronics and comfort systems in commer-
cial vehicles using various diagnostic devices

Content: Structure, function and diagnosis of:

• Starter and alternator circuit
• Bosch multifunction and interface controller
• CAN and LIN bus systems in vehicle networking and the control unit
topologies
• Different vehicle electrical system structures including their control
units
• Comfort equipment such as air conditioning, auxiliary heaters, elec-
tric windows, lighting systems
• Modern driver assistance systems such as B. Lane keeping and emer-
gency braking systems in trucks and vans

Development of diagnostic options and test options with the help of

the KTS Truck and the ESI[tronic]
Handling and diagnostics with the oscilloscope of the FSA 500, FSA
7xx and the KTS truck
Development of diagnostic strategies
Practical work and troubleshooting on vehicles which are equipped
with the systems mentioned above
Events: see www.bosch-training-solutions.com
If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

79
Truck
Measurement and testing of sensors
in commercial vehicles Course number: 1 987 727 578
www.bosch-training-solutions.com

Course Key: TMT

2 days

The measuring and testing of sensors in commercial vehicles

The measurement and testing of sensors in commercial vehicles course
provides comprehensive insights into the principles and practices of sensor
measurement and testing. Students explore the intricacies of sensor
technologies, data collection methods, and calibration techniques, gaining
practical insights into their application in commercial vehicle systems.

Attendees: Employees from motor vehicle and commercial vehicle companies with
a focus on light and heavy commercial vehicles

Precondition: Basic knowledge in the fields of electrics / electronics

We recommend the Bosch online training courses WBT Electrics 1,
WBT Electrics 2, VDS CAN-BUS,

Learning goals: Knowledge base for targeted and rapid diagnosis and error detection
various sensors in commercial vehicle systems

Content: Diagnostic options using measuring devices such as

• Multimeter / Multimeter
• FSA system tester or oscilloscope
• KTS self-diagnosis tester
Use of electrical circuit diagrams

Sensor signals in various systems such as

• Electronic diesel systems (EDC)
• Braking systems towing vehicle and trailer
• Air suspension
• Modern comfort systems such as e.g. B. Lane Keeping and Distance
Assist
• Drive train etc.

Explanation of various input and output signals

Practical work on vehicles and models using the
Electronic service information system ESI[tronic]

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

80
 Truck
Diesel injection technology for
commercial vehicles Course number: 1 987 727 563
www.bosch-training-solutions.com

Course Key: TDI

3 days

The diesel injection technology in commercial vehicles

The Diesel Injection technology for commercial vehicles course
covers fuel injection mechanisms, combustion processes, and
emission control technologies. Students learn about maintenance
and diagnostics, preparing them for modern diesel injection
technology in commercial vehicles.
Attendees: Employees from motor vehicle and commercial vehicle companies with
a focus on light and heavy commercial vehicles

Precondition: Basic knowledge in the fields of electrics / electronics

We recommend the Bosch online training courses WBT Electrics 1,
WBT Electrics 2, VDS CAN-BUS,

Learning goals: Independent troubleshooting and troubleshooting on the electronic

diesel fuel injection system (EDC) in commercial vehicles.
The participants also learn know how to carry out adjustment work on
the commercial vehicle
Content: Function and structure of the various commercial vehicle EDC systems:
• With UIS (PDE) – (MS 6.2 system)
• With UPS (PLD) – (MR / PLD)
• With CRS – (MS 6.3 system, EDC 7)
• External systems such as Scania HPI, XPI
• Euro 6 systems
Testing of the components using Bosch engine testers and KTS Truck in
conjunction with ESI[tronic] on the commercial vehicle

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

81
Truck
Exhaust treatment of commercial vehicles
Course number: 1 987 727 577
www.bosch-training-solutions.com

Course Key: TET

3 days

The exhaust treatment for commercial vehicles

The Diesel Exhaust treatment of commercial vehicles course offers
comprehensive insights into the principles and functionalities of exhaust
treatment systems in commercial vehicles. Students explore the intricacies
of emission control technologies, particulate filters, and selective catalytic
reduction (SCR), gaining practical insights into their design and operation.

Attendees: Employees from motor vehicle and commercial vehicle companies with
a focus on light and heavy commercial vehicles with extensive knowl-
edge in the diesel field

Precondition: Basic knowledge in the fields of diesel technology

We recommend the Bosch online training courses WBT Electrics 1,
WBT Electrics 2, VDS CAN-BUS,

Learning goals: Ability to troubleshooting on the electronic diesel fuel injection system
(EDC) in commercial vehicles.
The participants also learn know how to carry out adjustment work on
the commercial vehicle

Specialist knowledge of the diesel injection technology course for com-

mercial vehicles. Practical experience in action
of the ESI[tronic] and in dealing with the KTS

The ability to understand and troubleshooting the SCR systems (Ad-

blue) in commercial vehicles

Content: Exhaust gases in the diesel engine

Possibilities of exhaust aftertreatment, particle filter AdBlue
Function and structure of SCR systems such as Bosch DNOX1, DNOX2,
DNOX2.2 and Mercedes Bluetec I and Bluetec II, Nonox, Albonair
Checking the components using the KTS truck
Hydraulic test on SCR systems
Euro 6

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

82
Driven by
MILLISECONDS

Motorsport teams around the globe rely on spark

plugs from Bosch. But is it not just races that are
competed in and won with them. Bosch brings the
innovations and experiences of motorsports into the
workshop too. In this way, your customers benefit
from the high performance, precision and first-class
quality of Bosch spark plugs. Leading technology –
from the racetrack to the road.

www.boschaftermarket.com

What drives you,

drives us

Join free today and start collecting instantly.

Customer
Relations
Program
 Customer Relations Program
Customer Relations for workshop employees
Course number: 1 987 726 724
www.bosch-training-solutions.com

2 days Course Key: CWE

The Bosch customer relations for automotive workshops

The Bosch Customer Relations (for workshop employees) course provides
comprehensive insights into effective communication and customer service skills
for automotive workshop employees. Students delve into the intricacies of
customer interactions, conflict resolution, and service excellence, gaining
practical insights into fostering positive customer relations. The course
emphasizes the importance of professionalism and effective communication,
equipping students to provide exceptional customer experiences and uphold the
standards of Bosch service excellence.

Attendees: Vehicle mechanics or vehicle electricians who talk to customers in the

company or are registered for one of the Bosch training courses

Precondition: Proper advice to customers by arranging appropriate knowledge

Learning goals: Proper advice to customers by arranging appropriate knowledge

Content: Five key areas of positive customer treatment

What is the job of successful client advisors?
What characterizes a professional working style?
How do they create customer relationships and customer satisfaction?
Communication with superiors, colleagues and customers
Get more out of communication
Body language and its effect
Creating and maintaining the right climate for discussion
Apply questioning technique correctly
Benefit argumentation, what customers actually buy
The ten steps for handling complaints

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

85
Customer Relations Program
Technology for Sales-persons, customer
advisors, service advisors Course number: 1 987 727 592
www.bosch-training-solutions.com

Course Key: CTS

3 days

The Bosch technology for sales personal for automotive workshops

The Bosch Technology for salespersons, customer advisors, and service
advisors course covers advanced automotive technologies, emphasizing
product knowledge and effective communication. Students learn about
customer needs and tailored solutions, preparing them to drive sales
performance and enhance customer satisfaction.
Attendees: Owners and employees with commercial training who work in sales,
have telephone contact with customers in administration or are regis-
tered for the Bosch Automobile Service Advisor training course. This
training does not require any technical training
Learning goals: Competent contacts for customers for all vehicle systems and ser-
vice-related questions. The depth of each topic is determined in coop-
eration with the trainer and the group
The participants are taught basic automotive knowledge in order to be-
come safer and more informative when advising customers on testing
and repair work and when selling parts

Content: You will gain a comprehensive insight into the technology of modern
motor vehicles.

The main topics are, for example:

Petrol and diesel injection
Light, camera and radar systems
Networking, bus systems, electrics and electronics
Service and maintenance

Miscellaneous: The contents are carried out with a very high practical component with
demonstrations and activities on models, functional engines and vehi-
cles using Bosch testing technology. Sturdy shoes and long pants are
required

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

86
 Customer Relations Program
Service process on modern vehicles –
from making an appointment to vehicle
Course number: 1 987 727 610
handover www.bosch-training-solutions.com

2 days Course Key: CSP

The Bosch service processes on modern vehicles for automotive

workshops
Participants explore the intricacies of appointment scheduling, vehicle
diagnostics, and service procedures, gaining practical insights into the
seamless coordination of service operations. The course emphasizes the
importance of customer satisfaction and effective communication,
equipping students to deliver high-quality service and ensure a smooth
vehicle handover experience in line with Bosch's service standards.
Attendees: Commercial employees, bodywork and vehicle builders, vehicle
mechanics and vehicle mechatronics technicians who take on tasks
when accepting vehicles,
and service advisors
Precondition: Expertise in handling ESI[tronic] 2.0 and KTS is an advantage.
Pleasure in dealing with customers and have the initiative to implement
for new things quickly in the field of vehicle technology
Learning goals: Security when accepting a vehicle directly for maintenance and repair.
Determine and explain the need for service and process it with the help
of targeted research according to manufacturer specifications. Expert
handling of current vehicle systems. Through defined measures, the
quality and thus the trust of the customers and their satisfaction can be
increased and maintained in a controlled manner
Content: Decisive processes are dealt with on the basis of numerous practical
tasks and examples and reinforced with exercises.
In addition to factors such as cost-effectiveness and customer satis-
faction, compliance with manufacturer specifications and professional
maintenance documentation have top priority

This is based on everyday processes:

Appointment
Work preparation
Vehicle acceptance
Work execution
final inspection
Accounting
Vehicle handover
Quality management

Miscellaneous: The contents are carried out with a very high practical component with
demonstrations and activities on models, functional engines and vehi-
cles using Bosch testing technology. Sturdy shoes and long pants are
required
Events: see www.bosch-training-solutions.com
If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

87
Customer Relations Program
Process training workshop tests
Course number: 1 987 726 742
www.bosch-training-solutions.com
1 days Course Key: CPW

The Bosch processes for training workshop testing

The Bosch Process training workshop tests course provides comprehensive
insights into workshop testing procedures and practices. Students explore the
intricacies of diagnostic techniques, tool utilization, and testing
methodologies, gaining practical insights into their application in automotive
workshop environments. The course emphasizes the importance of accurate
testing and reliable procedures, equipping students to handle the
complexities of modern workshop testing standards and procedures in line
with Bosch's quality assurance protocols.

Attendees: Exclusively for Bosch Service

Precondition: Expertise in handling ESI[tronic] 2.0 and KTS is an advantage.

Pleasure in dealing with customers and have the initiative to implement
for new things quickly in the field of vehicle technology

Learning goals: Gain security in daily workshop processes, workshop services and
customer care. Increase efficiency, customer satisfaction and thus suc-
cess. avoidance of
Customer complaints and bad test results
Content: Can you meet the requirements of the workshop test in the workshop
reality? - Yes, you can!
Significant processes in the workshop are dealt with using the Bosch
workshop test and compared with your everyday workshop life
Appointment
Work preparation
Vehicle acceptance
Work execution
final inspection
Accounting
Vehicle handover
Customer Satisfaction
Miscellaneous: Please bring your last workshop test with you to the seminar

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

88
 Customer Relations Program
Bosch service advisor seminar series
Course number: 1 987 727 559
www.bosch-training-solutions.com

Course Key: BASA

The competent service advisor completes a five-module seminar series, enhancing their skills:

1.Company's Image: Focusing on the importance of first impressions.

2.Snapshot Overview: Bosch automotive service advisors excel in:

1. Customer engagement and persuasion
2. Effective communication
3. Work process optimization
4. Efficient marketing
5. Maintaining service quality through strategy and control.

Program and content :

Module 1 2 days
Seminar content: The Bosch Service Advisor personality
The Bosch Credo / The Service mission statement, the instance model, self-
image, external image, transactional analysis, the time balance model, dealing
with stress, dealing with time, motivation
Module 2 2 days
Seminar content: Service organization
Service quality and customer satisfaction – recognizing connections, design the
service cycle from a customer perspective and from an internal perspective, use
the organizational structure, implement optimization strategies
Module 3 2 days
Seminar content: Shaping communication with customers
The needs pyramid, I-messages, body language, the systematic Call setup,
telephone, complaints

Module 4 Strategic corporate management 2 days

Seminar content:
Creating competitive advantages through leadership, leading through
goals, visions,systemic company analysis, dealing with stress, time
management
Module 5 Quality What is quality of service? 2 days
Seminar content: Connections recognized?, Trust is good – Control is better, Comparison with
the competition – Recognize your own strengths, Customer's point of view –
Get feedback

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are enough
registrations from interested parties.

Registration for the Bosch Entrepreneur seminar series includes participation in all five
modules of the selected seminar series and requires that the relevant modules be attended
in the specified order.

Only after participating in all five modules will you receive the BUS certificate and be able
to take part in the BUS advanced seminar.

89
Customer Relations Program
BUS - Bosch entrepreneur seminar series
Course number: 1 987 727 796
www.bosch-training-solutions.com
Course Key: BUS
The current dates of the planned series and further information on this training series can be
found online at: www.bosch-training-solutions.com

Five modules, which are coordinated with each other, offer the respective group of a seminar series an
extensive spectrum of interesting business-related topics, whereby the exchange of experiences within
the group is not neglected.

The owners and managing directors of Bosch Service workshop concepts, systematically dealt with
their complex role as managers in order to be prepared for the requirements of today and in the future.
You will learn to look at the complex system of your business analytically and to specifically influence
factors relevant to success. Methodological knowledge from the areas of management, leadership,
human resources and marketing is imparted. In various modules, in exchange with the other
participants, they develop practical solutions that can be used in their own company.
Program and content :

Module 1 2 days
Seminar content: Lead with personality
Johari window, the instance model, pictorial emotional communication, the DISG
model, the transaction analysis, Vuka world, the needs

Module 2 2 days
Seminar content: Find and retain employees
Why, where to find, how to bind, the inner attitude, coaching as a management
tool, difficult appraisal interviews

Module 3 2 days
Seminar content: Strategic corporate management
Creating competitive advantages through leadership, leading through goals,
visions,systemic company analysis, dealing with stress, time management

Module 4 2 days
Seminar content: Service Marketing
Understanding marketing, building marketing activities, digitization,
communicating effectively use marketing as a holistic approach

Module 5 2 days
Seminar content: Service quality and service organization
• What is quality of service?
• Recognized connections? trust is good
• Control is better, comparison with the competition
• Recognize your own strengths, use the service cycle from the customer's
point of view and an optimal organizational structure, implement optimiza-
tion strategies

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are enough
registrations from interested parties.

Registration for the Bosch Entrepreneur seminar series includes participation in all five
modules of the selected seminar series and requires that the relevant modules be attended
in the specified order.

Only after participating in all five modules will you receive the BUS certificate and be able
to take part in the BUS advanced seminar.

90
 Fit for the Future for work-
shops – the Bosch training
series
Innovations and further developments in motor vehicle technology are the order of the day today.
Only through constant, well-founded further training is it possible for the specialist knowledge of the
employees to keep up with advances in vehicle technology. In this way, training courses and further
education at the Bosch Service Training Centre become an important instrument for the develop-
ment, promotion and motivation of your employees. With specially designed training programs, you
can offer your employees real prospects for professional development in your company. In this way,
in addition to motivating your employees, you also reach highly qualified managers in your company,
who can also significantly relieve you as the owner.

Let your sales representative support you in selecting the right employees for these programs. You
can register for the desired training series using our online booking tool www.bosch-training-solu-
tions.com. You will receive a targeted training plan from the Bosch Service Training Centre once you
have registered.
New training series
Your way to the Bosch system technician

Specialist knowledge in your workshop with only four training courses

optimize and meet the Bosch Service quality standards.

Qualify yourself or your employees to become a Bosch specialist in the individual specialist areas of petrol, die-
sel, electronics or brakes.

In order to meet the Bosch Service quality standards in the Bosch Service companies, a Bosch system technician
must be present in the company or, alternatively, all four new training series* in the areas of petrol, diesel, elec-
tronics and brakes must be attended.

With the qualification to become a Bosch specialist in the areas of petrol, diesel, electronics, brakes, as well as
attending the Customer service and high-voltage technician (HVT) training courses, participation in the Bosch
system technician examination is possible.

Customer
Relations
Bosch system technician
Program

+
Bosch high-vol- Bosch diesel Bosch electro- Bosch brakes Bosch gasoline
tage expert / specialist nics specialist specialist specialist
High voltage
expert

New training series*

Bosch petrol specialist
Bosch diesel specialist
Bosch electronics specialist
Bosch brake specialist

Further information can be found under the relevant chapters and under training series

* these can also be attended by other workshop groups 92

 Bosch training series
Bosch gasoline specialist

Increasingly complex gasoline injection systems.

The Bosch petrol specialist can carry out a targeted, fast and successful diagnosis, adjustment and
Carry out repair work on modern petrol injection systems.

Program and content :

3 days 1 987 727 869
ESI[tronic] 2.0 in connection with KTS

1 987 726 036

Alternative:
Live Webcast ESI[tronic] Web Training Parts
1-3
Web Based
Training:

Gasoline Injection Fundamentals 1 987 727 896

Live Webcasts: Sensors part 1-3 1 987 726 036

OBD (On-Board Diagnostics)
low fuel pressure
HV instruction general (not applicable if proof
of HVT)

Gasoline injection for advanced users 3 days 1 987 726 116

Live Webcasts: Thermal management systems 1 987 726 036

Basics of supercharging systems

Gasoline injection for professionals 3 days 1 987 726 120

Bosch Gasoline specialist

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will
be set at a later date when there are enough
registrations from interested parties.

* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy

93
Bosch training series
Bosch diesel specialist

Increasingly complex Diesel injection systems.

The Bosch petrol specialist can carry out a targeted, fast and successful diagnosis, adjustment and carry
out repair work on modern Diesel injection systems.

Program and content :

ESI[tronic] 2.0 in connection with 3 days 1 987 727 869
KTS

Alternative: 1 987 726 036

Live Webcast ESI[tronic] Web Training Parts
1-3
Web Based
Training:

Diesel fuel injection fundamentals 1 987 727 902

Live Webcasts: Sensors part 1-3 1 987 726 036

OBD (On-Board Diagnostics)
low fuel pressure
HV instruction general (not applicable if proof
of HVT)

Advanced diesel injection 3 days 1 987 726 248

Live Webcasts: Thermal management systems 1 987 726 036

Basics of supercharging systems

Diesel injection for professionals 3 days 1 987 726 249

Exhaust after treatment for diesel cars 3 days 1 987 726 250

Bosch Diesel specialist

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will
be set at a later date when there are enough
registrations from interested parties.

* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy
94
 Bosch training series
Bosch Electronic specialist

Increasingly complex around electronic systems.

The Bosch electronics specialist can carry out a targeted, fast and successful diagnosis, repair work on
modern electronic systems.

Program and content :

ESI[tronic] 2.0 in connection with 3 days 1 987 727 869
KTS

Alternative: 1 987 726 036

Live Webcast ESI[tronic] Web Training
Parts 1-3
Web Based E-Learning
Training:

Basics of Electrics 1 1 987 726 036

Basics of Electrics 2 (Battery) 1 987 726 036
Basics of Electrics 3 (Starter) 1 987 726 036
Basics of Electrics 4 (Generator) 1 987 726 036

Live Webcasts: Sensor's part 1-3 1 987 726 036

Vehicle electronics 1 4 days 1 987 727 520

Vehicle electronics 2 4 days 1 987 727 521

Live Webcasts: Driver assistance systems in cars (ADAS) 1 987 726 036

Practical training on modern automotive 3 days 1 987 727 522

electronics and driver assistance systems

Bosch Electrical systems electrical sys- 4 days 1 987 727 502

tems in cars

Bosch electronics specialist

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set
at a later date when there are enough registrations
from interested parties.

* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy
95
Bosch training series
Bosch brake specialist

In addition to ESP, mechanical wheel brakes are also installed in new electric vehicles.
The Bosch brake specialist not only diagnoses the increasingly linked electronic systems, but can also
carry out maintenance work on the wheel brakes.

Program and content :

ESI[tronic] 2.0 in connection with KTS 3 days 1 987 727 869

Alternative: 1 987 726 036

Live Webcast ESI[tronic] Web Training
Parts 1-3

Web Based
Training:
Conventional braking systems for 1 987 727 925
passenger cars

Anti-Blocking System (ABS) 1 987 727 890

VDS ABS / ESP System 1 987 727 903

Live Webcasts: Sensors part 1 – 3 1 987 726 036

HV instruction general (not applicable if
proof of HVT)

Driver safety systems: ABS and ESP from 3 days 1 987 726 351
Bosch

Bosch brake specialist

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date
will be set at a later date when there are
enough registrations from interested par-
ties.

* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy

96
 Bosch training series
Vehicle service technicians bridge program. Vehicle
service technicians (not trained by Bosch) to be rec- Course number: 1987726742
ognize to Bosch Service quality standards www.bosch-training-solutions.com

For employees who have already successfully completed the motor vehicle service technician course with a provider
other than Bosch or a master motor vehicle technician (from 2004), we offer this further training as an opportunity
for recognition of the Bosch Service quality standards. Prerequisite for participation is proof of completed training
as a certified vehicle service technician, master vehicle technician.
Program and content :
ESI[tronic] 2.0 in connection with KTS 3 days 1 987 727 869
Bosch tester application FSA 7xx / 500 2 days 1 987 726 024
High-voltage technician (HVT) 4 days 1 987 726 163
Diesel fuel injection fundamentals 3 days 1 987 727 902
Web Based
Training:
Basics of Electrics 1 1 987 726 036
Basics of Electrics 2 (Battery) 1 987 726 036
Basics of Electrics 3 (Starter) 1 987 726 036
Basics of Electrics 4 (Generator) 1 987 726 036
Gasoline Injection Fundamentals 1 987 727 896
Conventional braking systems for passenger cars 1 987 727 925
Anti-lock braking system (ABS) 1 987 727 890

Live Webcasts:
Virtual diagnosis ABS / ESP system 1 987 727 903

Live Webcasts:
Sensors part 1-3 1 987 726 036
OBD (On-Board Diagnostics)
Fuel pump (low fuel pressure systems)
Driver assistance systems in cars (ADAS)
Thermal management systems
Basics of supercharging systems
HV instruction general (not applicable if proof of HVT)
Body and comfort electronics 3 days 1 987 727 813
Practical training on modern automotive electronics and 3 days 1 987 727 522
driver assistance systems
Gasoline injection for professionals 3 days 1 987 726 120
Diesel injection for professionals 3 days 1 987 726 249
vehicle service technicians

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later
date when there are enough registrations from interested
parties.

* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy

97
Bosch training series
Bosch system technician / Vehicle service
technician (Registrations from 2023) Course number: 1 987 727 533
www.bosch-training-solutions.com
Bosch system technician – practice-oriented training for 40 years, we com-
bination of online and classroom training to success. Your new route to the
Bosch System technician / motor vehicle service technician.

Program and content :

ESI[tronic] 2.0 in connection with KTS 3 days 1 987 727 869

High-voltage technician (HVT) 4 days 1 987 726 163

Diesel fuel injection fundamentals 3 days 1 987 727 902

Web Based
Training:

Basics of Electrics 1 1 987 726 036

Basics of Electrics 2 (Battery) 1 987 726 036
Basics of Electrics 3 (Starter) 1 987 726 036
Basics of Electrics 4 (Generator) 1 987 726 036
Gasoline Fuel Injection Fundamentals 1 987 727 896
Conventional braking systems for passenger cars 1 987 727 925
Anti-lock braking system (ABS) 1 987 727 890

Live Webcasts:
Virtual diagnosis ABS / ESP system 1 987 727 903

Live Webcasts:
Sensors part 1-3 1 987 726 036
OBD (On-Board Diagnostics)
Fuel pump (low fuel pressure systems)
Driver assistance systems in cars (ADAS)
Thermal management systems
Basics of supercharging systems
HV instruction general (not applicable if proof of HVT)

Vehicle electronics 1 4 days 1 987 727 520

Vehicle electronics 2 4 days 1 987 727 521
Practical training on modern automotive electronics and 3 days 1 987 727 522
driver assistance systems
Bosch Electrical systems electrical systems in cars 4 days 1 987 727 502
Bosch system technician

Events: Please book the courses, live webcasts and online training
courses on the Bosch Training Portal at www.bosch-train-
ing-solutions.com.
* This Bosch qualification The certificates
is valid on completion within a serve
3 yearas proof.
cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy

98
 Bosch training series
Preparatory course for the Bosch exam
System technician / vehicle service technician Course number: 1 987 726 793
www.bosch-training-solutions.com

Duration: 4 days

Attendees: Employees who are registered as Bosch system technicians or motor

vehicle service technicians and are about to take the exam

Precondition: Participants are specifically invited

Learning goals: Refresher of the knowledge learned as part of the Bosch system tech-
nician / motor vehicle service technician training. Overcoming exam
barriers. Targeted theoretical and practical preparation for the exams

Content: Gasoline injection systems

Diesel systems
Electrical systems
Electronic systems
Electronic braking systems

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when
there are enough registrations from interested parties.

99
Bosch training series
Bosch diesel technician
(Registrations from 2023/ 2024) Course number: 1 987 727 565
www.bosch-training-solutions.com

The requirements for a BDS / BDC are changing very rapidly. That‘s why we have changed the training for
Bosch diesel technicians to be future-oriented - the focus is now on service and diagnosis. Bosch diesel
technicians ensure customer service for Bosch diesel injection systems through many years of professional
experience and technically sound knowledge of modern motor vehicles. The training to become a Bosch die-
sel technician can be car-oriented, commercial vehicle-oriented or completed in both disciplines.

Program and content :

ESI[tronic] 2.0 in connection with KTS 3 days 1 987 727 869
Alternative: KTS Truck und ESI[tronic] 3 days 1 987 726 212
DCI700 injector test bench 2 days 1 987 726 989
Bosch CRI CRIN Repair Stage 1 & 3 2 days 1 987 726 283
Bosch Common Rail injectors 3rd stage 3 days 1 987 727 523
High-pressure pump / common rail systems 3 days 1 987 727 568
CP4 Testing 1 days 1 987 726 242
CP4 pump / Repair of the CP4 pump 2 days 1 987 726 239

Diesel fuel injection fundamentals 3 days 1 987 727 902

Live Webcasts: E-Learning

Sensors part 1-3 1 987 726 036

OBD (On-Board Diagnostics)
Fuel pump (low fuel pressure systems)
Thermal management systems
Basics of supercharging systems
Advanced diesel injection 3 days 1 987 726 248
Alternative: diesel injection technology for commercial vehicles 3 days 1 987 727 578
Diesel injection for professionals 3 days 1 987 726 249
Exhaust treatment for diesel cars 3 days 1 987 726 250
Alternative: exhaust treatment for commercial vehicles 3 days 1 987 727 577
High-voltage technician (HVT) 3 days 1 987 726 163
Customer Relations (for workshop employees) 2 days 1 987 726 724
Bosch diesel technician exam** 3 days 1 987 927 566

Events: Please book the courses, live webcasts and online training
courses on the Bosch Training Portal at www.bosch-train-
ing-solutions.com. The certificates serve as proof.

* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy
** An examination fee is charged for the Bosch diesel technician examination.

The alternative courses relate to companies and diesel technicians, who are also active in the commercial vehicle and off-highway sector. 100
 Bosch training series
Bosch high-voltage Expert
(Registrations from 2024/ 2025)

In order to comply with future emission limits, more and more alternative drive systems are finding their way onto the
automotive market. Regardless of whether they are pure electric vehicles, electric vehicles with a range extender, hybrid
or plug-in hybrid vehicles, they all have one thing in common: They work with new, complex high-voltage technologies.

In order to prevent the dangers from higher voltages and additional hazardous substances in such systems and to be
allowed / able to work on the vehicle with hybrid / electric technology, extensive, safety-related and legal knowledge of
these systems is required. The HV systems and their HV components are tested for the required safety and functionali-
ty using the latest diagnostics and testing technology from Bosch. The training to become a Bosch high-voltage expert
gives you the prerequisites to meet the increasing service tasks of modern high-voltage technology. The Bosch high-vol-
tage expert certificate is issued if at least the seminar modules 1 987 726 167, 1 987 726 159 Live Webcast and 1 987
726 159 via Bosch Service Training have been completed.

Program and content :

Batteries Advanced 2 days 1 987 727 705
Starter Motor Advanced 2 days 1 987 727 529
Alternator Advanced 2 days 1 987 727 518
High-voltage expert (HVE) 4 days 1 987 726 167
High-voltage expert (HVE) Working under Voltage (Off) 1 days 1 987 726 159
Qualified person for work on live parts, HV components part 1
(theory)
High-voltage expert (HVE) Working under Voltage (Off) 2 days 1 987 727 568
Qualified person for work on live parts, HV Components Part 2
(Practice)

Bosch high-voltage specialist

Events: Please book the courses, live webcasts and online training
courses on the Bosch Training Portal at www.bosch-train-
ing-solutions.com. The certificates serve as proof.

* This Bosch qualification is valid on completion within a 48 month cycle - from participants start date.
* Refunds for service training are validate within the terms & condition policy
** An examination fee is charged for the Bosch high voltage technician examination.

101
Bosch training series
BUS - Bosch entrepreneur seminar series
Course number: 1 987 727 796
www.bosch-training-solutions.com
Course Key: BUS
The current dates of the planned series and further information on this training series can be
found online at: www.bosch-training-solutions.com

Five modules, which are coordinated with each other, offer the respective group of a seminar series an
extensive spectrum of interesting business-related topics, whereby the exchange of experiences within
the group is not neglected.

The owners and managing directors of Bosch Service workshop concepts, systematically dealt with
their complex role as managers in order to be prepared for the requirements of today and in the future.
You will learn to look at the complex system of your business analytically and to specifically influence
factors relevant to success. Methodological knowledge from the areas of management, leadership,
human resources and marketing is imparted. In various modules, in exchange with the other
participants, they develop practical solutions that can be used in their own company.
Program and content :

Module 1 Lead with personality 2 days

Seminar content: Johari window, the instance model, pictorial emotional communication, the DISG
model, the transaction analysis, Vuka world, the needs

Module 2 Find and retain employees 2 days

Seminar content: Why, where to find, how to bind, the inner attitude, coaching as a management
tool, difficult appraisal interviews

Module 3 Strategic corporate management 2 days

Seminar content: Creating competitive advantages through leadership, leading through goals,
visions,systemic company analysis, dealing with stress, time management

Module 4 Service Marketing 2 days

Seminar content: Understanding marketing, building marketing activities, digitization,
communicating effectively use marketing as a holistic approach

Module 5 Service quality and service organization 2 days

Seminar content: • What is quality of service?
• Recognized connections? trust is good
• Control is better, comparison with the competition
• Recognize your own strengths, use the service cycle from the customer's
point of view and an optimal organizational structure, implement optimiza-
tion strategies

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are enough
registrations from interested parties.

Registration for the Bosch Entrepreneur seminar series includes participation in all five
modules of the selected seminar series and requires that the relevant modules be attended
in the specified order.

Only after participating in all five modules will you receive the BUS certificate and be able
to take part in the BUS advanced seminar.

102
 Bosch training series
Bosch service advisor
Course number: 1 987 727 559
www.bosch-training-solutions.com

Course Key: BASA

The competent service advisor, a series of seminars with 5 modules:
Business card of the company – There is no second chance to make a first impression

At a glance: This is what Bosch automotive service advisors bring to your business
He / She wins customers and convinces with personality
He / She advises and supports customers with good communication and argumentation
He/she optimizes, organizes and controls work processes
He / She uses marketing in a targeted and successful manner:
Effective and cost-conscious for existing and new customers
He / She creates and maintains service quality through clear strategy and good controlling

Program and content :

module 1 The BASB personality 2 days
Seminar content: Our commandments / BASB mission statement, the instance
model, self-image, external image, transactional analysis, the
time balance model, dealing with stress, dealing with time,
motivation

module 2 Service organization 2 days

Seminar content: Service quality and customer satisfaction – recognizing connec-
tions, design the service cycle from a customer perspective and
from an internal perspective, use the organizational structure,
implement optimization strategies

module 3 Shaping communication with customers 2 days

Seminar content: The needs pyramid, I-messages, body language, the systematic
Call setup, telephone, complaints

module 4 Strategic corporate management 2 days

Seminar content: Creating competitive advantages through leadership, leading
through goals, visions,systemic company analysis, dealing with
stress, time management

module 5 Quality What is quality of service? 2 days

Seminar content: Connections recognized?, Trust is good – Control is better,
Comparison with the competition – Recognize your own
strengths, Customer's point of view – Get feedback

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later
date when there are enough registrations from interested par-
ties.

Registration for the Bosch Automobile Service Advisor includes participation in all five modules of the selected seminar series
and requires that the relevant modules be attended in the specified order.

The current dates of the planned series and further information on this training series can be found online on the Bosch Auto-
motive Training Solutions at: www.bosch-training-solutions.com”

103
Bosch training series
Advanced workshop 2024 / 2025 for
Bosch automotive service advisors Course number: 1 987 726 790
www.bosch-training-solutions.com

Duration: 3 days

Attendees: Advanced training for participants who have completed the “Certified Automotive
Service Advisor (GASB) or Bosch Automobile Service Advisor (BASB) gone through
and successfully completed

Precondition: Completed GASB or BASB training

Learning goals: The participants expand their knowledge of current topics in the field of technol-
ogy and deepen their knowledge of behavior and communication. They reflect on
implementation successes as well as difficult situations in practice. They practice
how to deal with the increasingly frequent price objections from customers. They
discuss current issues and work out solutions. You will receive situational support
from the trainer and the group

Content: Part 1 – Deepening knowledge in the field of behavior and communication

Current challenges
Use of trends and developments
Actively accompany changes in behavior and process optimization
Self-reflection and comparison with colleagues in the exchange of experiences
Deepen objection handling
Plan and implement concrete measures
Introduce your own topics and receive solutions

Part 2 -Current topics from the field of technology

What does today's state of the art mean for automotive service and where are we
headed developments in vehicle technology

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are
enough registrations from interested parties.

104
 Bosch training series
Bosch System Technician Seminar
Course number: 1 987 727 581
www.bosch-training-solutions.com

Duration: 4 days

Attendees: Advanced training for participants who have completed the who have complet-
ed their Bosch Systems Technician Exam invite only

Precondition: Passed their Bosch Systems Technician Exam

Learning goals: The participants expand their knowledge of current topics in the field of tech-
nology and deepen their knowledge of behavior and communication. They
reflect on implementation successes as well as difficult situations in practice.
They practice how to deal with the increasingly frequent price objections from
customers. They discuss current issues and work out solutions. You will re-
ceive situational support from the trainer and the group

Content: Innovations EDC systems

Exhaust aftertreatment on diesel / petrol vehicles
EDC workshop diagnostic functions
Innovations in electronic wheel slip control systems
Electronic parking brake systems
Engine mechanics, sensors and actuators
Electric / hybrid vehicles
Vehicle assistance systems
Convenience electronics
Energy management
48 volt vehicle electrical system
Practical tips chassis
Construction and adjustment of modern lighting systems
Effective use of ESI[tronic], CAS / CAS[plus] and KTS 5xx, KTS 6xx, KTS 250,
KTS 350, FSA xxx, HTD 815. Error localization with the Computer Aided Service
CAS and CAS[plus] in practice modern Bosch motor testers
Special topics from the group
Exchange of experiences in the group
High proportion of practice in relation to the various systems

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there
are enough registrations from interested parties.

* This Bosch qualification is valid on completion within a 3 year cycle - from participants start date.
* Refunds for service training are vaildated within the terms & condition policy
** An examination fee is charged for the Bosch diesel technician examination.

105
Bosch training series
Bosch diesel Seminar
Course number: 1 987 727 564
www.bosch-training-solutions.com

Duration: 2 days

Attendees: Advanced training for Bosch diesel technicians

The participants are specifically invited"

Precondition: Passed the Bosch diesel technician exam

Learning goals: Participants expand their knowledge in the field of diesel vehicle technology. In
this way, they remain up to date in diagnostics and testing technology in order to
be able to proceed more precisely and efficiently when troubleshooting on the
vehicle

Content: "Structure / function / diagnosis of current Bosch Common Rail and SCR systems
New high-pressure pump generation CP4 (with eSV) installed at Mercedes,Renault
and Volkswagen
New solenoid valve injectors with NCC or NCS (3 and 4 pin injectors) used by BMW
and Mercedes, among others
Targeted diagnosis of the fuel low-pressure and high-pressure system
Further development of SCR systems (twin dosing)
Necessary adjustments, settings and resets of adaptations with the KTS after re-
pairing or replacing the components

Practical work:
Use of ESI[tronic] 2.0., KTS, FSA and the individual service tools (e.g.
Dieselset 1, Dieselset 3 / 3.1, return flow meter, Denoxtronic PC / LD) for targeted
and therefore quick diagnosis / troubleshooting on the vehicle

Miscellaneous:

Events: see www.bosch-training-solutions.com

If no dates have been given yet, the date will be set at a later date when there are
enough registrations from interested parties.

106
 Training calendar 2024
Training Courses

January 2024
Week Part Nr. Course Training Start Date: End Date: Duration Starting Location
Key: time

1987726036 SEN 1 Sensor's part 1 2024/01/15 2024/01/15 120 min 08:00 Online

1987726036 SEN 2 Sensor's part 2 2024/01/15 2024/01/15 120 min 10:30 Online

1987726036 SEN 3 Sensor's part 3 2024/01/15 2024/01/15 120 min 13:00 Online

1987726036 ESI 1 ESI[tronic] web training part 1 2024/01/16 2024/01/16 120 min 08:00 Online

1987726036 ESI 2 ESI[tronic] web training part 2 2024/01/16 2024/01/16 120 min 10:30 Online

1987726036 ESI 3 ESI[tronic] web training part 3 2024/01/16 2024/01/16 120 min 13:00 Online

1987726036 LEDi Modern LED lighting technology in cars 2024/01/17 2024/01/17 120 min 08:00 Online
3
1987726036 LEDi Modern LED lighting technology in cars 2024/01/17 2024/01/17 120 min 11:00 Online

Basics of Electrics 1 (Principles of

1987726036 BE1 2024/01/18 2024/01/18 120 min 09:00 Online
Electricity)

Bosch FSA 500 / 7xx oscilloscope

1987726036 FSA 1 2024/01/18 2024/01/18 120 min 08:00 Online
measurements part 1

Bosch FSA 500 / 7xx oscilloscope

1987726036 FSA 2 2024/01/18 2024/01/18 120 min 10:30 Online
measurements part 2

1987726036 CCS Basics of supercharging systems 2024/01/22 2024/01/22 120 min 09:00 Online

1987726036 BE2 Basics of Electrics 2 (Battery) 2024/01/23 2024/01/23 120 min 09:00 Online

1987726036 LFP Fuel pump (low fuel pressure systems) 2024/01/23 2024/01/23 120 min 09:00 Online

1987726036 LFP Fuel pump (low fuel pressure systems) 2024/01/23 2024/01/23 120 min 13:00 Online

4 1987726036 TMS Thermal management systems 2024/01/24 2024/01/24 120 min 11:30 Online

Driver assistance systems in cars -

1987726036 DASi 2024/01/25 2024/01/25 120 min 09:00 Online
calibration with the Bosch DAS 3000

Driver assistance systems in cars -

1987726036 DASi 2024/01/25 2024/01/25 120 min 11:30 Online
calibration with the Bosch DAS 3000

Operation & user training Injector test

1987726989 DCI 7 2024/01/29 2024/01/30 2 days 09:00 Midrand
platform DCI 700

1987726036 BE3 Basics of Electrics 3 (Starter) 2024/01/29 2024/01/29 120 min 09:00 Online
5
1987726036 OBD OBD (On-Board Diagnostics) 2024/01/29 2024/01/29 120 min 09:00 Online

1987726036 GHV General high-voltage instruction 2024/01/31 2024/01/31 120 min 09:00 Online

1987726036 GHV General high-voltage instruction 2024/01/31 2024/01/31 120 min 13:00 Online
107
 Training calendar 2024
Training Courses

February 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

1987726036 GDI 1 Bosch Gasoline Direct Injection Part I 2024/02/01 2024/02/01 120 min 08:00 Online
1987726036 GDI 2 Bosch Gasoline Direct Injection Part 2 2024/02/01 2024/02/01 120 min 10:30 Online
5 1987726036 GDI 3 Bosch Gasoline Direct Injection Part 3 2024/02/01 2024/02/01 120 min 13:00 Online
1987726036 BE4 Basics of Electrics 4 (Generator) 2024/02/01 2024/02/01 120 min 09:00 Online
1987727896 GIF Gasoline Injection Fundamentals 2024/02/06 2024/02/08 3 days 09:00 Durban
1987727727 ABT Airbag and belt tensioners 2024/02/05 2024/02/08 4 days 09:00 Midrand
6
ESI[tronic] 2.0 in connection with KTS (3xx /
1987727869 ESI/KTS 2024/02/05 2024/02/07 3 days 09:00 Durban
5xx / 6xx / 8xx / 9xx / ESI online)

1987727520 VE1 Vehicle electronics 1 (Basics) 2024/02/12 2024/02/15 4 days 09:00 Midrand
1987726024 FSA Bosch tester application FSA 7xx / 500 2024/02/14 2024/02/15 2 days 09:00 Midrand
1987727570 BVS Bosch Vehicle Service 2024/02/12 2024/02/15 4 days 09:00 Midrand
7 1987726724 CWE
Customer Relations (for workshop
2024/02/13 2024/02/14 2 days 09:00 Midrand
employees)

Operation & user training Injector test

1987727526 EPS708 2024/02/12 2024/02/13 2 days 09:00 Midrand
platform EPS 708

1987727902 DIF Diesel fuel injection fundamentals 2024/02/19 2024/02/21 3 days 09:00 Midrand
8 1987726116 GIA Gasoline Fuel injection for advanced users 2024/02/19 2024/02/21 3 days 09:00 Durban

1987727790 CAN Networking in the motor vehicle 2024/02/26 2024/02/29 4 days 09:00 Midrand
1987726036 OBD OBD (On-Board Diagnostics) 2024/02/28 2024/02/28 120 min 09:00 Online
9 1987726036 ESI 1 ESI[tronic] web training part 1 2024/02/27 2024/02/27 120 min 08:00 Online
1987726036 ESI 2 ESI[tronic] web training part 2 2024/02/27 2024/02/27 120 min 10:30 Online
1987726036 ESI 3 ESI[tronic] web training part 3 2024/02/27 2024/02/27 120 min 13:00 Online

108
 Training calendar 2024
Training Courses

March 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

1987727564 SEM 1 Seminar 1 2024/03/04 2024/03/08 5 days 07:30 Midrand

10 1987727564 SEM 1 Seminar 1 2024/03/04 2024/03/08 5 days 07:30 Midrand

1987727564 SEM 1 Seminar 1 2024/03/04 2024/03/08 5 days 07:30 Midrand

1987726120 GIP Gasoline injection for professionals 2024/03/11 2024/03/13 3 days 09:00 Durban

1987726250 EXD Exhaust treatment for diesel cars 2024/03/11 2024/03/13 3 days 09:00 Midrand

11 1987727592 CTS
Technology for Salespersons, customer
advisors, service advisors
2024/03/12 2024/03/14 3 days 09:00 Midrand

DAS 3000 calibration set – practical

1987726026 DAS training adjustment of ACC and front 2024/03/12 2024/03/12 1 day 09:00 Midrand
camera

109
 Training calendar 2024
Training Courses

April 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

1987727730 ACS Vehicle air conditioning systems 2024/04/02 2024/04/04 3 days 09:00 Midrand

14 1987727550 DCS Diesel conventional systems Theory 2024/04/22 2024/04/25 4 days 09:00 Midrand

1987727807 LED LED headlights check and adjust properly 2024/04/04 2024/04/04 1 day 09:00 Midrand

1987727813 BCE Body and comfort electronics 2024/04/08 2024/04/10 3 days 09:00 Midrand

1987726249 DIP Diesel injection for professionals 2024/04/08 2024/04/10 3 days 09:00 Midrand

1987726036 CCS Basics of supercharging systems 2024/04/11 2024/04/11 120 min 09:00 Online

15 1987726036 TMS Thermal management systems 2024/04/11 2024/04/11 120 min 11:30 Online

1987726036 SEN 1 Sensor's part 1 2024/04/11 2024/04/11 120 min 08:00 Online

1987726036 SEN 2 Sensor's part 2 2024/04/11 2024/04/11 120 min 10:30 Online

1987726036 SEN 3 Sensor's part 3 2024/04/11 2024/04/11 120 min 13:00 Online

1987726013 MDA Modern driver assistance systems 2024/04/15 2024/04/16 2 days 09:00 Midrand

16 Service process on modern vehicles – from

1987727610 CSP 2024/04/17 2024/04/18 2 days 09:00 Midrand
making an appointment to vehicle Handover

1987727521 VE2 Vehicle electronics 2 (Intermediate) 2024/04/22 2024/04/25 4 days 09:00 Midrand

1987727550 DCS Diesel conventional systems Practical 2024/04/22 2024/04/26 5 days 09:00 Midrand
17
1987726036 LFP Fuel pump (low fuel pressure systems) 2024/04/23 2024/04/23 120 min 09:00 Online

1987726036 LFP Fuel pump (low fuel pressure systems) 2024/04/23 2024/04/23 120 min 13:00 Online

110
 Training calendar 2024
Training Courses

May 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

1987726257 MTS Measuring, testing sensors 2024/05/13 2024/05/15 3 days 09:00 Durban
Diesel Fuel Injection for Advanced
1987726248 ADI 2024/05/06 2024/05/08 3 days 09:00 Midrand
Users
1987726036 GHV General high-voltage instruction 2024/04/07 2024/04/07 120 min 09:00 Online

19 1987726036 GHV General high-voltage instruction 2024/04/07 2024/04/07 120 min 13:00 Online
Driver assistance systems in cars -
1987726036 DASi 2024/05/09 2024/05/09 120 min 09:00 Online
calibration with the Bosch DAS 3000

Driver assistance systems in cars -

1987726036 DASi 2024/05/09 2024/05/09 120 min 11:30 Online
calibration with the Bosch DAS 3000

Cape
1987727682 CBS Conventional braking systems 2024/05/13 2024/05/15 3 days 09:00
Town

BASA Bosch Automotive Service

1987727559 BASA 1 2024/05/14 2024/05/15 2 days 09:00 Midrand
Advisor Seminar Series (module 1)

20 1987726036 FSA 1
Bosch FSA 500 / 7xx oscilloscope
2024/05/14 2024/05/14 120 min 08:00 Online
measurements part 1

Bosch FSA 500 / 7xx oscilloscope

1987726036 FSA 2 2024/05/14 2024/05/14 120 min 10:30 Online
measurements part 2
High-pressure pump / common rail
1987727568 HPS 2024/05/13 2024/05/15 3 days 09:00 Midrand
systems
Direct shift gearbox (DSG) with wet and
1987726302 DSG 2024/05/20 2024/05/21 2 days 09:00 Midrand
dry clutch

BUS - Bosch entrepreneur seminar

1987727796 BUS 1 2024/05/21 2024/05/22 2 days 09:00 Midrand
series (module 1)

21 1987727502 BES Bosch Electrical systems in vehicles 2024/05/20 2024/05/23 4 days 09:00 Midrand
Bosch CRI CRIN Repair
1987726283 BCN 2024/05/20 2024/05/21 2 days 09:00 Midrand
Stage 1 & 2

Diagnosis and service on automatic

1987726303 DAT 2024/05/22 2024/05/22 1 day 09:00 Midrand
transmissions
1987727581 SEM 2 Seminar 2 2024/05/27 2024/05/31 5 days 07:30 Midrand
22 1987727581 SEM 2 Seminar 2 2024/05/27 2024/05/31 5 days 07:30 Midrand
1987727581 SEM 2 Seminar 2 2024/05/27 2024/05/31 5 days 07:30 Midrand

111
 Training calendar 2024
Training Courses

June 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

Driver Safety Systems ABS & ESP by

1987726351 ABS 2024/06/03 2024/06/05 3 days 09:00 Midrand
Bosch
1987727705 BAS Battery Advanced 2024/06/03 2024/06/04 2 days 09:00 Midrand
23
1987727523 BI3 Bosch Common Rail injectors 3rd stage 2024/06/03 2024/06/05 3 days 09:00 Midrand
1987727518 AAS Alternators Advanced 2024/06/05 2024/06/06 2 days 09:00 Midrand
1987726163 HVT1 High-voltage technician Stage 1 2024/06/10 2024/06/13 4 days 09:00 Midrand
1987726242 CPT CP4 Testing 2024/06/10 2024/06/10 1 day 09:00 Midrand
1987726036 LEDi Modern LED lighting technology in cars 2024/06/11 2024/06/11 120 min 09:00 Online
1987726036 LEDi Modern LED lighting technology in cars 2024/06/11 2024/06/11 120 min 11:00 Online

BASA Bosch Automotive Service Advisor

1987727559 BASA 2 2024/06/11 2024/06/12 2 days 09:00 Midrand
Seminar Series (module 2)
24 1987726036 GDI 1 Bosch Gasoline Direct Injection Part I 2024/06/13 2024/06/13 120 min 08:00 Online
1987726036 GDI 2 Bosch Gasoline Direct Injection Part 2 2024/06/13 2024/06/13 120 min 10:30 Online
1987726036 GDI 3 Bosch Gasoline Direct Injection Part 3 2024/06/13 2024/06/13 120 min 13:00 Online

CP4 pump Repair of the CP4 pump -

1987726239 CPR authorized concept partners (Bosch 2024/06/11 2024/06/12 2 days 09:00 Midrand
Diesel Center / Bosch Diesel Service)

1987727529 STR Starter Motors Advanced 2024/06/18 2024/06/19 2 days 09:00 Midrand

UI (Pump Nozzle) and Unit Pump UP for

1987726286 UIP 2024/06/18 2024/06/20 3 days 09:00 Midrand
25 cars and commercial vehicles

BUS - Bosch entrepreneur seminar series

1987727796 BUS 2 2024/06/19 2024/06/20 2 days 09:00 Midrand
(module 2)

1987727896 GIF Gasoline Injection Fundamentals 2024/06/24 2024/06/26 3 days 09:00 Midrand
26 1987726169 HYB Bosch Hybrid Systems 2024/06/24 2024/06/27 4 days 09:00 Midrand

112
 Training calendar 2024
Training Courses

July 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

VDO pump testing and repair - complete

27 1987726203 VDO
program
2024/07/01 2024/07/02 2 days 09:00 Midrand

Gasoline Fuel injection for advanced

1987726116 GIA 2024/07/08 2024/07/10 3 days 09:00 Midrand
users
28
BASA Bosch Automotive Service Advisor
1987727559 BASA 3 2024/07/10 2024/07/11 2 days 09:00 Midrand
Seminar Series (module 3)

1987727727 ABT Airbag and belt tensioners 2024/07/15 2024/07/18 4 days 09:00 Midrand

1987727570 BVS Bosch Vehicle Service 2024/07/15 2024/07/18 4 days 09:00 Durban

Efficient use of KTS Truck and ESI[tronic]

29 1987726212 TKT
2.0 with Trailer Plugs
2024/07/15 2024/07/17 3 days 09:00 Durban

BUS - Bosch entrepreneur seminar series

1987727796 BUS 3 2024/07/16 2024/07/17 2 days 09:00 Midrand
(module 3)

1987726213 TIN Trailer PIN authorization 2024/07/18 2024/07/18 1 day 09:00 Durban

Measurement and testing of sensors in

1987727578 TMT 2024/07/22 2024/07/23 2 days 09:00 Midrand
commercial vehicles
30
1987727807 LED LED headlights check and adjust properly 2024/07/25 2024/07/25 1 day 09:00 Midrand

1987726120 GIP Gasoline injection for professionals 2024/07/29 2024/07/31 3 days 09:00 Midrand
31
Electrics / electronics and comfort
1987727865 TES 2024/07/29 2024/07/30 2 days 09:00 Midrand
systems in commercial vehicles

113
 Training calendar 2024
Training Courses

August 2024
Week Part Nr. Course Training Duration Starting Location
Start Date: End Date:
Key: time

Diesel injection technology for

32 1987727563 TDI
commercial vehicles
2024/08/05 2024/08/07 3 days 09:00 Midrand

1987727730 ACS Vehicle air conditioning systems 2024/08/12 2024/08/14 3 days 09:00 Midrand

BASA Bosch Automotive Service

33 1987727559 BASA 4
Advisor Seminar Series (module 4)
2024/08/13 2024/08/14 2 days 09:00 Midrand

Exhaust treatment of commercial

1987727577 TET 2024/08/12 2024/08/14 3 days 09:00 Midrand
vehicles
1987727564 SEM 3 Seminar 3 2024/08/19 2024/08/23 5 days 07:30 Midrand

1987727564 SEM 3 Seminar 3 2024/08/19 2024/08/23 5 days 07:30 Midrand

34 1987727564 SEM 3 Seminar 3 2024/08/19 2024/08/23 5 days 07:30 Midrand

BUS - Bosch entrepreneur seminar

1987727796 BUS 4 2024/08/21 2024/08/22 2 days 09:00 Midrand
series (module 4)

1987727813 BCE Body and comfort electronics 2024/08/26 2024/08/28 3 days 09:00 Midrand

ESI[tronic] 2.0 in connection with KTS

35 1987727869 ESI/KTS
(3xx / 5xx / 6xx / 8xx / 9xx / ESI online)
2024/08/13 2024/08/15 3 days 09:00 Midrand

1987726024 FSA Bosch tester application FSA 7xx / 500 2024/08/29 2024/08/30 2 days 09:00 Midrand

114
 Training calendar 2024
Training Courses

September 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

1987727727 MDA Modern driver assistance systems 2024/09/02 2024/09/03 2 days 09:00 Midrand

1987727790 CAN CAN Networking In the Motorvehicle 2024/09/02 2024/09/05 4 days 09:00 Midrand

Operation & user training Injector test

36 1987726989 DCI
platform DCI 700
2024/09/02 2024/09/03 2 days 09:00 Midrand

Direct shift gearbox (DSG) with wet and

1987726302 DSG 2024/09/04 2024/09/05 2 days 09:00 Midrand
dry clutch

1987727682 CBS Conventional brake systems 2024/09/09 2024/09/11 3 days 09:00 Midrand

1987727570 BVS Bosch Vehicle Service 2024/09/09 2024/09/12 4 days 09:00 Midrand

BASA Bosch Automotive Service Advisor

37 1987727559 BASA 5
Seminar Series (module 5)
2024/09/10 2024/09/11 2 days 09:00 Midrand

Operation & user training Injector test

1987727526 EPS708 2024/09/09 2024/09/10 2 days 09:00 Midrand
platform EPS 708

Driver Safety Systems ABS & ESP by

1987726351 ABS 2024/09/16 2024/09/18 3 days 09:00 Midrand
Bosch
1987726167 HVT2 High Voltage technician Stage 2 2024/09/16 2024/09/19 4 days 09:00 Midrand

38 1987727902 DIF Diesel fuel injection fundamentals 2024/09/16 2024/09/18 3 days 09:00 Midrand

BUS - Bosch entrepreneur seminar series

1987727796 BUS 5 2024/09/17 2024/09/18 2 days 09:00 Midrand
(module 5)

1987726303 DAT Diagnosis automatic transmissions 2024/09/25 2024/09/25 1 day 09:00 Midrand

39 VDO pump testing and repair - complete

1987726203 VDO 2024/09/25 2024/09/26 2 days 09:00 Midrand
program

1987727520 VE1 Vehicle electronics 1 2024/09/30 2024/10/03 4 days 09:00 Durban

40
1987726248 DIA Diesel Fuel Injection for advanced Users 2024/09/30 2024/10/02 3 days 09:00 Midrand

115
 Training calendar 2024
Training Courses

October 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

40 1987726257 MTS Measuring, testing sensors 2024/10/01 2024/10/03 3 days 09:00 Midrand

1987727581 SEM 4 Seminar 4 2024/10/07 2024/10/11 5 days 07:30 Midrand

1987727581 SEM 4 Seminar 4 2024/10/07 2024/10/11 5 days 07:30 Midrand

41
1987727581 SEM 4 Seminar 4 2024/10/07 2024/10/11 5 days 07:30 Midrand

1987726742 CPW Process training workshop tests 2024/10/09 2024/10/09 1 day 09:00 Midrand

1987727521 VE2 Vehicle electronics 2 2024/10/14 2024/10/17 4 days 09:00 Durban

42
1987726249 DIP Diesel Fuel Injection for advanced Users 2024/10/14 2024/10/16 3 days 09:00 Midrand

1987727896 GIF Gasoline Injection Fundamentals 2024/10/21 2024/10/23 3 days 09:00 Midrand

43 Practical training on modern automotive

1987727522 PAS 2024/10/21 2024/10/24 4 days 09:00 Midrand
electronics and driver assistance systems

Bosch Electrical systems electrical systems

1987727502 BES 2024/10/28 2024/10/31 4 days 09:00 Midrand
44 in cars

1987727550 DCS Diesel conventional systems Theory 2024/10/28 2024/11/01 4 days 09:00 Midrand

116
 Training calendar 2024
Training Courses

November 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

Bosch CRI CRIN Repair

1987726283 BCN 2024/11/04 2024/11/05 2 days 09:00 Midrand
45 Stage 1 & 2

1987727570 BVS Bosch Vehicle Service 2024/11/04 2024/11/07 4 days 09:00 Midrand

1987727705 BAS Battery Advanced 2024/11/11 2024/11/12 2 days 09:00 Midrand

46 1987727568 HPS High-pressure pump / common rail systems 2024/11/11 2024/11/13 3 days 09:00 Midrand

1987727518 AAS Alternators Advanced 2024/11/13 2024/11/14 2 days 09:00 Midrand

1987727564 SEM 5 Seminar 5 2024/11/18 2024/11/22 5 days 07:30 Midrand

47 1987727564 SEM 5 Seminar 5 2024/11/18 2024/11/22 5 days 07:30 Midrand

1987727564 SEM 5 Seminar 5 2024/11/18 2024/11/22 5 days 07:30 Midrand

1987726159 HVE High-voltage expert 2024/11/25 2024/11/29 5 days 09:00 Midrand

48 1987726116 GIA Gasoline Fuel injection for advanced users 2024/11/25 2024/11/27 3 days 09:00 Midrand

1987727550 DCS Diesel conventional systems Practical 2024/11/25 2024/11/29 5 days 09:00 Midrand

117
 Training calendar 2024
Training Courses

December 2024
Course Starting
Week Part Nr. Training Start Date: End Date: Duration Location
Key: time

1987727529 STR Starter Motors Advanced 2024/12/02 2024/12/03 2 days 09:00 Midrand
49
1987727523 BI3 Bosch Common Rail injectors 3rd stage 2024/12/02 2024/12/04 3 days 09:00 Midrand

1987726120 GIP Gasoline injection for professionals 2024/12/09 2024/12/11 3 days 09:00 Midrand

1987726242 CPT CP4 Testing 2024/12/09 2024/12/09 1 day 09:00 Midrand

50 CP4 pump Repair of the CP4 pump -
1987726239 CPR authorized concept partners (Bosch 2024/12/10 2024/12/11 2 days 09:00 Midrand
Diesel Center / Bosch Diesel Service)

118
 Things you need to know

Training Hours

Course Fees
Midrand and Durban Facilities
Courses commencing Mondays;
A daily technical training fee is levied per person, per
- Monday: 9:00 - 16:00
course, per day. Conditions of payment are indicated
- Tue/Wed/Thur/Fri: 8:30 - 16:00
in the following sections. The daily fee includes course
materials and documents, tea or coffee, refreshments
Courses commencing Wednesday;
and a light lunch.
- Wednesday: 13:00 - 16:00
- Thur/Fri: 8:30 - 16:00
Certificates

• Training Certificates will be issued directly to the

Cape Town Facility
Courses commencing Mondays;
Trainee on successful completion of the course. The
- Monday: 10:00 - 16:00
Trainee’s results will be sent to the employer. A test is
- Tue/Wed/Thur/Fri: 8:30 - 16:00
undertaken at the end of each course and Certificates
issued on attaining the required pass mark.
Courses commencing Wednesday;
• All Certificates are serialised, and the issuing of
- Wednesday:
- Thur/Fri:
13:00 - 16:00
8:30 - 16:00
duplicate Certificates will only be considered on
written request with justified reasons. The decision to
Bordering African Countries:
issue duplicate Certificates remains with Robert Bosch
Beginning time dependent on flight details.
(Pty) Ltd. The ownership of the Certificate remains
with the employer.

• A Bosch Training Passport will be issued on Health and Safety Procedures

completion of the first relevant course, and remains
the property of the individual. All persons attend the Training Courses at their own
risk. All Trainees are obliged to abide by the rules
governing the Occupational Health and Safety Act
Conditions in operation at the time. Safety footwear is now
mandatory at all Robert Bosch training schools.
Courses conducted at the Durban and Cape Town ven- Participants without safety footwear will not be allowed
ues, are subject to a minimum attendance requirement to participate in the practical part of the course.
of 5 (five) persons. Where minimum attendance is not
reached, RBSA reserves the right to cancel or defer the Access to Midrand Training Facility
course to an alternative date.
For your security and that of your vehicle, a new
modern access control system has been installed at
Dress Code the Midrand facility. You will be required to sign for
an access card on the day that you arrive for training.
All trainees are expected to be neat and presentable. The card will give you access to parking bays and the
Long trousers or jeans may be worn, as well as closed training school. The card must be returned to security
safety shoes. Shorts or sandals are not acceptable and when you depart on you last day of training. Due to
the trainee will be approached to change his attire. the high cost of the cards, a lost card fee will be levied
should you misplace the card.

119
Bosch Service Network

Accommodation

Training Reservations Assistance in locating accommodation is provided.

Please ensure you provide all necessary details.
1. Complete the on-line registration The cost of accommodation is for your account.
application at www.bosch-training- Arrangements for travel to and from the Training venue
solutions.com. details on page 7 must be made by yourself at your own cost. (Some
accommodation venues do provide transport to and
2. Bosch will confirm reservations, and raise from the Training Centre, at additional cost.)
an invoice against the respective Order
Form.

Reservations and Enquiries:

Tel (011) 651-9767
[email protected]

Payment

Payments will be debited to your Wholesaler/Bosch

Service Account. Account debits will be created on
receipt of your completed on-line booking.
These are subject to the Bosch terms & conditions of
payment.

Note: Non-payment of course fees may result in:

(a) Certificates being withheld.
(b) Further bookings being restricted.

Cancellations

• Cancellations must be made in writing by

email to the contact in the training reservations
as above by three working days before
course commencement.
• Courses booked and not attended will be charged for.
Participants may be transferred to retain
reservations.

120
 Efficiency is what drives us

Technologies from Bosch are used in almost all vehicles worldwide.

We have dedicated more than 125 years of pioneering spirit on research

and development and are constantly working on a combination Spare
parts, diagnostics, workshop equipment and services to support
workshops.

► Solutions for efficient vehicle repairs

► Innovative workshop equipment and software

► One of the largest spare parts offers for new and exchange parts worldwide

► Broad Wholesaler network for fast and reliable parts supply

► Comprehensive education and technical training offer

► Targeted sales and marketing support

More information is available from:

boschaftermarket.com

what drives us,

drives you
Version 1 -
12/2022

www.bosch-training-solutions.com

Your way to Bosch Service Training –

Automotive Training Portal

121
 Retain copy for your Bosch Service Email Order form once completed to:
[email protected]
records Reservations;
Training Order form 2024
Franchise Type Course
Name(s) of Participants : Company Name (of Course Course Course
(eg Bosch Service, e- Cost
(one per line) Participants company) Key Date Part No.
Car,ACD,etc (excl. VAT)

NOTE: VAT
See Training Program for Course information, Reservations and Payment
Conditions.
TOTAL (incl.
VAT)
Ensure correct completion of order form to avoid delays.
THE SECTION BELOW IS TO BE COMPLETED BY YOUR BOSCH WHOLESALER / DISTRIBUTOR / AGENT ONLY...

ORDER CONFIRMATION:
Order
Bosch Wholesaler /
Number:
Distributor /

Bosch Service / Agent:

Reservation invalid without Order Number.
Contact Person:

Customer
Authorised Signatory: Date: RBSA use only
No:

Live webcast training is conducted through MS TEAMS – participants need to apply this software to join these events.
Email mail address need to be provided for the invite to be sent.

Participants' email address:

122