Scribd
Upload
29 views1 page

Additol-Xl-482 en A4

Uploaded by

long
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views1 page

Additol-Xl-482 en A4

Uploaded by

long
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ADDITOL® XL 482

Technical Datasheet

INTRODUCTION
ADDITOL® XL 482 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle
refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC coatings as well as sensitive compositions that require
specific solvents. It is effective with most resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL XL 482 contains
no silicone ingredients.

TYPE FORM OF DELIVERY (F.O.D.)


Acrylic flow modifier, without silicone addition Active substance: 100%
x

PRODUCT DATA SPECIAL PROPERTIES AND USE


Determined per batch: The addition of ADDITOL XL 482 will help:
· improve flow and levelling
Non-Volatile · reduce pinholes, fisheyes, craters, and orange peel
non-volatile by weight [%] ~100% · improve substrate wetting
non-volatile by volume, theoretical [%] ~100% · aid in air release
· facilitate pigment dispersion
Color/Appearance
color Clear liquid Quantity to be added: 0.1 - 2.0 % on solid resin
x
Dynamic Viscosity
Brookfield LV, #1 spindle, 30 RPM [mPa.s] ~25,000 maximum
STORAGE
At temperatures up to 25 °C storage stability packed in original
Acid Value containers amounts to at least 1460 days.
on solids 1 maximum
x

Color Scale PRECAUTIONS


APHA 80 maximum
Before using ADDITOL XL 482, see the Safety Data Sheet (SDS) for
information on the identified hazards of the material and the
Not continually determined:
recommended personal protective equipment and procedures.
Density x
density [lbs./gal.] [25°C] 8.65 ± 0.10 STORAGE AND HANDLING
Flash Point (Setaflash) Care should be taken to not expose the product to high temperature
approx. flash point >266°F (>130°C) conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or
acids. Storage and handling should be in steel containers. Wash
thoroughly after handling. Keep container tightly closed. Use with
adequate ventilation. See the SDS for the recommended storage
temperature range for ADDITOL XL 482.

1.0 / 19.10.2021 (replaces all previous versions) Worldwide Contact Info: www.allnex.com Page 1/1
Disclaimer: allnex Group companies ('allnex') exclude all liability with respect to the use made by anyone of the information contained herein. The information contained herein represents allnex's best
knowledge but does not constitute any express or implied guarantee or warranty as to the accuracy, the completeness or relevance of the data set out herein. Nothing contained herein shall be construed as
conferring any license or right under any patent or other intellectual property rights of allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee
or warranty is provided that the product and/or information is suitable for any specific use, performance or result. Any unauthorized use of the product or information may infringe the intellectual property
rights of allnex, including its patent rights. The user should perform his/her own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the
investigation of any possible violation of intellectual property rights or misappropriation of trade secrets of allnex and/or third parties remain the sole responsibility of the user.
Notice: Trademarks indicated with ® , TM or * as well as the allnex name and logo are registered, unregistered or pending trademarks of Allnex Netherlands B.V. or its directly or indirectly affiliated allnex Group
companies. ©2021 allnex Group. All Rights Reserved.

You might also like