Scribd
Upload
11 views

Filtration_Application-Data-Sheet_form

filtrat

Uploaded by

fhdwyjihmxkuaxuozi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

Filtration_Application-Data-Sheet_form

filtrat

Uploaded by

fhdwyjihmxkuaxuozi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Application Data Sheet

Solid / Liquid Separation


SAMPLE DATA
Project Name Date
Project Location Sales Engineer
Company Name Engineering Contractor Name
Company Location Requested Completion Date
Type or Simulation: ☐ Lab, ☐ Pilot, ☐ Information Customer Witnessed: ☐ Yes ☐ No
Funding: ☐ Customer Paid ☐ Sales Assistance Simulation Location: ☐ SLC ☐ Project Site ☐ Other Lab
CUSTOMER CONTACT
Name Shreyas Manchalwar / Mehul Agarwal Phone Number (Main) 020-67080300
Position Phone Number (Direct)
Address Godrej CastleMaine, Office no 801 & 802, Sasson Road, PuneNumber
Mobile
E-mail [email protected], [email protected]
Fax Number
INDUSTRY INFORMATION
(Check all that apply)
☐ Food ☐ Chemical ☐ Minerals ☐ Pulp/Paper ☐ Metals
PROCESS OBJECTIVES
Objective Leachate removal and reduction in moisture to obtain 5-10% wet cake
Existing Situation Filter press (pilot scale)
Equipment to be Simulated Vendor to suggest
Product: ☐
■ Solid ☐ Liquid Waste: ☐ Solid ☐
■ Liquid

☐ Thickening Desired Underflow Solids Concentration (wt%)


☐ Clarification Desired Liquid Suspended Solids Concentration (ppm)
☐ Classification Particle Size Cut
☐ Vacuum Filtration Desired Cake Moisture (wt%) 5 - 10%
☐ Pressure Filtration Desired Cake Moisture (wt%) 5 - 10%
Permissible floc / chem treatment No chemical treatment allowed
Wash Requirements
☐ Solids Washing
Temperature Room temperature / Vendor to suggest(ºF)
for elevated
Washtemperature
Ratio (kg liquor/kg solid) 1:1
Dissolved Solids to be Removed or Recovered N/a
Desired Recovery or Removal Efficiency (%) Max possible Wash Liquor Source Raw water
Method: ☐ Countercurrent ☐ Once Through ☐
■ Other Vendor to suggest, wet cake pH to be maintained at 8

Contaminant level in mother liquor


Other
Particle degradation - important: ☐Yes ☐ No Vapor tight / pressure const
Material of construction Operating / design pressure
FLSmidth USA • 7158 South FLSmidth Drive • Midvale • Utah 84047 • Phone: (801) 871-7000 • Fax (801) 871-7001 •
www.flsmidth.com
PROCESS DATA
Process Conditions
Temperature 85 (ºC) pH 1.5 - 2 ☐ Existing Production ☐
■ New Development

Pressure (psig) Precautions


Feed Slurry Suspended Solids
Mass Rate (t/h) 86000 - 90000 kg/hr Mass Rate (t/h) 13760 - 14400 kg/hr
Volumetric Rate (m3/h) 77.5 - 81 m3/hr Concentration (wt%) 16
Density (kg/m3) 1110 Density (kg/m3) 500
Material Material
Liquid Particle Size Distribution
Mass Rate (t/h) 72240 - 75600 kg/hr P(100) Refer pg 3 Micron
Composition Water + chemical solution P(80) Micron
Density (kg/m3) 1000 at (ºC) P(50) Micron
Dissolved Solids Concentration Refer pg. 4 (g/l) P(20) Micron
FLOW SHEET
Please include one step prior to and after flow streams of separation equipment.

FL PROCESS DAT

A OW SHEET

COMMENTS
Other equipment tested Trails performed in pilot scale filter press with 5 micron PP filter cloth having 1mx1m plates (qty: 7)

Test results In pilot scale, wet cake is observed to have moisture content of 30-35%. For commercial scale, moisture
content in wet cake shall in range of 5 - 10%.

FLSmidth USA • 7158 South FLSmidth Drive • Midvale • Utah 84047 • Phone: (801) 871-7000 • Fax (801) 871-7001 •
www.flsmidth.com
Below report is of Leachate collected after filtration

You might also like