MATERIAL SAFETY DATA SHEET

1. Chemical Product and Company Identification :

Trade name : Water Treatment chemical
Brand name & code : Maxtreat 635
MSDS Number : 120207635
Manufacturer : M/s. Thermax Limited, Chemical
Division
97-E, General Block, MIDC Industrial
Area,
Bhosari, Pune 411 (India)
24 hour emergency assistance : 00 91 20 712 0181
Non emergency assistance : 00 91 20 712 0169
CPL Classification:
Hazard category: Not applicable
Risk Phrase
Safety Phrase:

2. Composition / information on ingredients :

Component CAS % by Exposure guidelines
wt.
Proprietroy aldehyde mix 111-20-1 <12% Info.Not available
containing HCHO
N – alkyl dimethyl benzyl 008424- < 30 % Not direcly applicable
ammonium chloride 85-1

3. Hazards Identification:
Very hazardous in case of skin contact (irritant), of eye contact (irritant),
of ingestion, of inhalation. Hazardous in case of skin contact (corrosive), of eye
contact (corrosive). The amount of tissue damage depends on length of contact.
Eye contact can result in corneal damage or blindness. Skin contact can produce
inflammation and blistering. Inhalation of dust will produce irritation to gastro-
intestinal or respiratory tract, characterized by burning, sneezing and coughing.
Severe over-exposure can produce lung damage, choking, unconsciousness or
.Inflammation of the eye is characterized by redness, watering, and itching. Skin
inflammation is characterized by itching, scaling, reddening, or, occasionally,
blistering
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available.
MUTAGENIC EFFECTS: Mutagenic for mammalian somatic cells. Mutagenic for
bacteria and/or yeast.TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Classified Reproductive system/toxin/female,
Reproductive system/toxin/male [POSSIBLE].
The substance may be toxic to kidneys, liver, heart, gastrointestinal tract,
cardiovascular system, central nervous system (CNS).Repeated or prolonged
exposure to the substance can produce target organs damage. Repeated
exposure of the eyes to a low level of dust can produce eye irritation. Repeated
skin exposure can produce local skin destruction, or dermatitis. Repeated
inhalation of dust can produce varying degree of respiratory irritation or lung
damage

Potential Health Effects:

Skin - Prolonged contact result in irritation.

Eyes - Eye contact may result in conjunctivitis, seen as excess redness
and marked swelling of conjunctiva with profuse discharge. Permanent
damage may occur
Inhalation – Direct Vapor is irritating to the respiratory tract, causing
stinging sensation in the nose and throat, discharge from throat coughing,
discomfort and difficulty in breathing, and headache..
Ingestion - May cause moderate to marked irritation.May irritate the
gastrointestinal systems.may cause severe allergic reactions
This might result in discomfort or pain in the chest.
Chronic effects - Excessive exposure may cause liver, kidney, gastrointestinal
and nervous system disorder.
4. First Aid Measures:
Use of water for at least 15 minutes. Cold water may be used. Get medical
attention immediately.
Skin Contact:
In case of contact, immediately flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Cover the irritated skin
with an emollient. Cold water may be used.Wash clothing before reuse.
Thoroughly clean shoes before reuse. Get medical attention immediately.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-
bacterial cream. Seek immediate medical attention.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical attention immediately.
Serious Inhalation:
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing
such as a collar, tie, belt or waistband. If breathing is difficult, administer oxygen.
If the victim is not breathing, perform mouth-to-mouth resuscitation. WARNING: It
may be hazardous to the person providing aid to give mouth-to-mouth
resuscitation when the inhaled material is toxic, infectious or corrosive. Seek
immediate medical attention.
Ingestion:
Do NOT induce vomiting unless directed to do so by medical personnel. Never
give anything by mouth to an unconscious person. If large quantities of this
material are swallowed, call a physician immediately. Loosen tight clothing such
as a collar, tie, belt or waistband.
Serious Ingestion: Not available.
Notes to Physician :
Depending on the severity of the exposure, disorders of skin, eyes, respiratory
system and central nervous system may be aggravated.
Eye Contact:
Check for and remove any contact lenses. In case of contact, immediately flush
eyes with plenty of water

5. Fire Fighting Measures: -

Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: OPEN CUP: 250°C (482°F).
Flammable Limits: Not available.
Products of Combustion: Not available.
Fire Hazards in Presence of Various Substances: Slightly flammable
to flammable in presence of heat.
6. Accidental Release Measures :
Personnel precautions – Use personnel protective equipment, breathing
apparatus required only in fire situation.
Environmental precautions – Eliminate all ignition sources, use absorbent
materials to contain spill and prevent material from entering soil and
waterways.

7. Handling and storage :

Avoid contact with eyes, skin and clothing. Keep away from heat, sparks
and flame. Store separate from oxidizing materials.
Handling precautions – All the personal protective equipments should be
worn while handling.
Storage conditions – Avoid extremes of temperature. Keep it in a dry
place.

8. Exposure controls / personnel protection :-

Personal protective equipment :-
Eye protection – Wear chemical splash goggles and face shield (ANSI
Z87.1 or approved equivalent)
Skin & body protection – Where splashing is possible, fully chemical
resistant protective light weight clothing (chemical resistant apron) and
safety boots are required.
Respiratory protection – No personal respiratory protective equipment
normally required and protection PVC oil / chemical resistant gloves are
recommended
9. Physical and chemical properties :-
Boiling point :>103 Degree Celcious
Odor : strong pungent odour aldehyde type
Sp.Gravity : 0.9-1.18
Appearance :Clear colourless to light pale yellow liquid.
Solubility :complete in water
PH as is : <7.0

10. Stability and reactivity :-

Stability / incompatibility – Stable at ambient temperature
Materials to avoid – Avoid contact with reactive chemicals.mineral acids
Hazardous de-composition products – Might generate carbon dioxide at
very high temperatures.

11. Toxicity Information :

LD50 (rat, oral): Not determined
Oral: LD 50 Acute for 100%active 240 mg/kg Rat for quat
Dermal:
Acute irritation: The eye and skin irritation of BKC is concentration dependant;
undiluted materials are usually moderate to severe skin and eye irritants,
whereas 1% aqueous solutions are mildly irritating and 0.1% aqueous solutions
are usually not irritating

12. Ecological information :

This is a preparation and environmental assessment is based on
component data and that of similar products.
Environmental Ecotoxicity: Expected to be harmful to aquatic organisms
mobility – This preparation is water-soluble & is expected to remain primarily in
water.

13. Disposal considerations :-

Waste disposal – Dispose off according to local, state and federal
requirement. This product will generate ash if burned and can be burned
directly in appropriate equipment.

14. Transport information :-

Hazard Class – corrosive liquid nos.
UN number: 3265
IMDG Class: 8
IMDG Packing group: III

15. Regulatory information :-

Classification/ symbol: Irritant

16. Other information :-

 Recommended use –Broad spectrum non oxidizing biocide proprietory
mixture.For water treatment use.

NOTICE :-

This information relates specifically to the product designated and may not be
valid for the product when used in combination with any other materials or
products or in a particular process. The information is, to the best of our
knowledge and belief, accurate and reliable as of the date compiled. However,
no representation, warranty or guarantee is made as to its accuracy, reliability or
completeness. It is the user’s responsibility to review this information, satisfy
itself as to its suitability and completeness and pass on the information to its
employees or customers in accordance with applicable federal, state or local
hazard communications requirement. We do not accept responsibility for any
loss or damage which may occur from the use of this information.

Brand Name : Maxtreat 635

It is a trademark of Thermax Limited, Chemical Division, Pune. – India

********************************************************************************************