KEY CONCEPTS

STANDARD RESULTS :

1. EQUATION OF A CIRCLE IN VARIOUS FORM:

(a) The circle with centre (h, k) & radius ‘r’ has the equation;
(x  h)2 + (y  k)2 = r2.
(b) The general equation of a circle is x2 + y2 + 2gx + 2fy + c = 0 with centre as:

(g, f) & radius = g2  f 2  c .

Remember that every second degree equation in x & y in which coefficient of x2 = coefficient of y2
& there is no xy term always represents a circle.
If g2 + f 2  c > 0  real circle.
g2 + f 2  c = 0  point circle.
g2 + f 2  c < 0  imaginary circle.
Note that the general equation of a circle contains three arbitrary constants, g, f & c which corresponds to
the fact that a unique circle passes through three non collinear points.
(c) The equation of circle with (x1 , y1) & (x2 , y2) as its diameter is :
(x  x1) (x  x2) + (y  y1) (y  y2) = 0.
Note that this will be the circle of least radius passing through (x1 , y1) & (x2 , y2).

2. INTERCEPTS MADE BY A CIRCLE ON THE AXES :

2
The intercepts made by the circle x2 + y2 + 2gx + 2fy + c = 0 on the co-ordinate axes are 2 g  c

& 2 f 2  c respectively..

NOTE :
If g2  c > 0  circle cuts the x axis at two distinct points.
If g2 = c  circle touches the x-axis.
If g2 <c  circle lies completely above or below the x-axis.

3. POSITION OF A POINT w.r.t. A CIRCLE :

The point (x1 , y1) is inside, on or outside the circle x2 + y2 + 2gx + 2fy + c = 0.
according as x12 + y12 + 2gx1 + 2fy1 + c  0 .

Note : The greatest & the least distance of a point A from a circle
with centre C & radius r is AC + r & AC  r respectively.

4. LINE & A CIRCLE :

Let L = 0 be a line & S = 0 be a circle. If r is the radius of the circle & p is the length of the perpendicular
from the centre on the line, then :
(i) p > r  the line does not meet the circle i. e. passes out side the circle.
(ii) p = r  the line touches the circle.
(iii) p < r  the line is a secant of the circle.
(iv) p = 0  the line is a diameter of the circle.

5. PARAMETRIC EQUATIONS OF A CIRCLE :

The parametric equations of (x  h)2 + (y  k)2 = r2 are :
x = h + r cos  ; y = k + r sin  ;   <    where (h, k) is the centre,
r is the radius &  is a parameter.
Vibrant Academy (I) Pvt. Ltd. "B-41" Road No.2, IPIA, Kota (Raj.) Ph. 06377791915 (www.vibrantacademy.com) [2]
 Note that equation of a straight line joining two point  &  on the circle x2 + y2 = a2 is

     
x cos + y sin = a cos .
2 2 2

6. TANGENT & NORMAL :

(a) The equation of the tangent to the circle x2 + y2 = a2 at its point (x1 , y1) is, x x1 + y y1 = a2.
Hence equation of a tangent at (a cos , a sin ) is ;
x cos  + y sin  = a. The point of intersection of the tangents at the points P() and Q() is

   
a cos a sin 2
2 , .
  
cos 2
cos 2

(b) The equation of the tangent to the circle x2 + y2 + 2gx + 2fy + c = 0 at its point (x1 , y1) is
xx1 + yy1 + g (x + x1) + f (y + y1) + c = 0.

(c) y = mx + c is always a tangent to the circle x2 + y2 = a2 if c2 = a2 (1 + m2) and the point of contact

 a 2m a 2 
is   , .
 c c
(d) If a line is normal / orthogonal to a circle then it must pass through the centre of the circle. Using
this fact normal to the circle x2 + y2 + 2gx + 2fy + c = 0 at (x1 , y1) is
y1  f
y  y1 = (x  x1).
x1  g

7. A FAMILY OF CIRCLES :
(a) The equation of the family of circles passing through the points of intersection of two circles
S1 = 0 & S2 = 0 is : S1 + K S2 = 0 (K  1).

(b) The equation of the family of circles passing through the point of intersection of a circle S = 0 & a line
L = 0 is given by S + KL = 0.

(c) The equation of a family of circles passing through two given points (x1 , y1) & (x2 , y2) can be written
in the form :

x y 1
(x  x1) (x  x2) + (y  y1) (y  y2) + K x1 y1 1 = 0 where K is a parameter..
x2 y2 1

(d) The equation of a family of circles touching a fixed line y  y1 = m (x  x1) at the fixed point (x1 , y1) is
(x  x1)2 + (y  y1)2 + K [y  y1  m (x  x1)] = 0 , where K is a parameter.
In case the line through (x1 , y1) is parallel to y - axis the equation of the family of circles touching it
at (x1 , y1) becomes (x  x1)2 + (y  y1)2 + K (x  x1) = 0.
Also if line is parallel to x - axis the equation of the family of circles touching it at
(x1 , y1) becomes (x  x1)2 + (y  y1)2 + K (y  y1) = 0.

(e) Equation of circle circumscribing a triangle whose sides are given by L1 = 0 ; L2 = 0 & L3 = 0 is given
by ; L1L2 +  L2L3 +  L3L1 = 0 provided co-efficient of xy = 0 & co-efficient of x2 = co-efficient of y2.

(f) Equation of circle circumscribing a quadrilateral whose side in order are represented by the lines
L 1 = 0, L 2 = 0, L 3 = 0 & L4 = 0 is L 1L3 +   L2L 4 = 0 provided co-efficient of
x2 = co-efficient of y2 and co-efficient of xy = 0.

Vibrant Academy (I) Pvt. Ltd. "B-41" Road No.2, IPIA, Kota (Raj.) Ph. 06377791915 (www.vibrantacademy.com) [3]
8. LENGTH OF A TANGENT AND POWER OF A POINT :
The length of a tangent from an external point (x1 , y1) to the circle
2 2
S  x2 + y2 + 2gx + 2fy + c = 0 is given by L= x1  y1  2 gx1  2 f1 y  c = S1 .
Square of length of the tangent from the point P is also called THE POWER OF POINT w.r.t. a circle.
Power of a point remains constant w.r.t. a circle.
Note that : power of a point P is positive, negative or zero according as the point ‘P’ is outside, inside or
on the circle respectively.

9. DIRECTOR CIRCLE :
The locus of the point of intersection of two perpendicular tangents is called the DIRECTOR CIRCLE of the given

circle. The director circle of a circle is the concentric circle having radius equal to 2 times the original
circle.

10. EQUATION OF THE CHORD WITH A GIVEN MIDDLE POINT :

The equation of the chord of the circle S  x2 + y2 + 2gx + 2fy + c = 0 in terms of its mid point

x1  g
M (x 1, y1 ) is y  y1 =  (x  x 1). This on simplication can be put in the form
y1  f

xx1 + yy1 + g (x + x1) + f (y + y1) + c = x12 + y12 + 2gx1 + 2fy1 + c

which is designated by T = S1.

Note that : the shortest chord of a circle passing through a point ‘M’ inside the circle,
is one chord whose middle point is M.

11. CHORD OF CONTACT :

If two tangents PT1 & PT2 are drawn from the point P (x1, y1) to the circle
S  x2 + y2 + 2gx + 2fy + c = 0, then the equation of the chord of contact T1T2 is :
xx1 + yy1 + g (x + x1) + f (y + y1) + c = 0.

REMEMBER :
(a) Chord of contact exists only if the point ‘P’ is not inside .

2LR
(b) Length of chord of contact T1 T2 = .
R 2 L2

R L3
(c) Area of the triangle formed by the pair of the tangents & its chord of contact =
R 2 L2
Where R is the radius of the circle & L is the length of the tangent from (x1, y1) on S = 0.

 2R L 
(d) Angle between the pair of tangents from (x1, y1) = tan1  2
 
2
 L R 
where R = radius ; L = length of tangent.
(e) Equation of the circle circumscribing the triangle PT1 T2 is :
(x  x1) (x + g) + (y  y1) (y + f) = 0.
(f) The joint equation of a pair of tangents drawn from the point A (x1 , y1) to the circle
x2 + y2 + 2gx + 2fy + c = 0 is : SS1 = T2.
Where S x2 + y2 + 2gx + 2fy + c ; S1  x12 + y12 + 2gx1 + 2fy1 + c
T  xx1 + yy1 + g(x + x1) + f(y + y1) + c.
Vibrant Academy (I) Pvt. Ltd. "B-41" Road No.2, IPIA, Kota (Raj.) Ph. 06377791915 (www.vibrantacademy.com) [4]
12. POLE & POLAR :
(i) If through a point P in the plane of the circle , there be drawn any straight line to meet the circle
in Q and R, the locus of the point of intersection of the tangents at Q & R is called the POLAR
OF THE POINT P ; also P is called the POLE OF THE POLAR.
(ii) The equation to the polar of a point P (x1 , y1) w.r.t. the circle x 2 + y2 = a2 is given by
xx 1 + yy 1 = a 2 , & if the circle is general then the equation of the polar becomes
xx1 + yy1 + g (x + x1) + f (y + y1) + c = 0. Note that if the point (x1 , y1) be on the circle then the chord
of contact, tangent & polar will be represented by the same equation.

 Aa 2 Ba 2 
(iii) Pole of a given line Ax + By + C = 0 w.r.t. any circle x2 + y2 = a2 is   
 C , C  .
 
(iv) If the polar of a point P pass through a point Q, then the polar of Q passes through P.
(v) Two lines L1 & L2 are conjugate of each other if Pole of L1 lies on L2 & vice versa Similarly two points P
& Q are said to be conjugate of each other if the polar of P passes through Q & vice-versa.

13. COMMON TANGENTS TO TWO CIRCLES :

(i) Where the two circles neither intersect nor touch each other , there are FOUR common tangents,
two of them are transverse & the others are direct common tangents.
(ii) When they intersect there are two common tangents, both of them being direct.
(iii) When they touch each other :
(a) EXTERNALLY : there are three common tangents, two direct and one is the tangent at the
point of contact .
(b) INTERNALLY : only one common tangent possible at their point of contact.
(iv) Length of an external common tangent & internal common tangent to the two circles is given by:

2 2
Lext = d  ( r1  r2 ) & Lint = d 2  ( r1  r2 ) 2 .

Where d = distance between the centres of the two circles . r1 & r2 are the radii of the two circles.
(v) The direct common tangents meet at a point which divides the line joining centre of circles
externally in the ratio of their radii.
Transverse common tangents meet at a point which divides the line joining centre of circles
internally in the ratio of their radii.

14. RADICAL AXIS & RADICAL CENTRE :

The radical axis of two circles is the locus of points whose powers w.r.t. the two circles are equal. The
equation of radical axis of the two circles S1 = 0 & S2 = 0 is given ;
S1  S2 = 0 i.e. 2 (g1  g2) x + 2 (f1  f2) y + (c1  c2) = 0.
NOTE THAT :
(a) If two circles intersect, then the radical axis is the common chord of the two circles.
(b) If two circles touch each other then the radical axis is the common tangent of the two circles at
the common point of contact.
(c) Radical axis is always perpendicular to the line joining the centres of the two circles.
(d) Radical axis need not always pass through the mid point of the line joining the centres of the
two circles.
(e) Radical axis bisects a common tangent between the two circles.
(f) The common point of intersection of the radical axes of three circles taken two at a time is
called the radical centre of three circles.
(g) A system of circles , every two which have the same radical axis, is called a coaxal system.
(h) Pairs of circles which do not have radical axis are concentric.

Vibrant Academy (I) Pvt. Ltd. "B-41" Road No.2, IPIA, Kota (Raj.) Ph. 06377791915 (www.vibrantacademy.com) [5]