SCG Plastics Product Reference Guide

Polyethylene
High Density Polyethylene
EL-Lene HDPE is High Density Polyethylene resin produced by bimodal process, a technology developed by Mitsui chemicals, Inc. of Japan

Film
Product Name MFR Density TS Tear Strength Dart Impact Recommended Applications Key Characteristics
(g/10min) (g/cm3) (kg/cm2) (g) (g)
H5604F 0.04 0.956 MD: 620, TD: 310 MD: 3, TD: 80 139 General film High tensile strength, good
impact
F15 0.06 0.954 MD: 910, TD: 380 MD: 3, TD: 135 142 Film produced by high speed machine High tensile strength, high
and wide lay flat film (>25") productivity
H5615F 0.15 0.956 MD: 760, TD: 290 MD: 3, TD: 118 107 Ultra thin film (<10 micron) High speed processing, high
tensile strength
* tested by 12 micron film thickness

Extrusion Coating/Casting
Product Name MFR Density TS Tear Strength Dart Impact Recommended Applications Key Characteristics
(g/cm3)
2
(g/10min) (kg/cm ) (g) (g)
H377C 7.5 0.964 MD: 245, TD: 290 MD: 24, TD: 827 <60 Extrusion coating/lamination or casting
Excellent film stiffness, moisture
for various packaging (for blending
barrier and low surface friction
with LDPE/LLDPE)
* tested by 30 micron film thickness

Injection
Product Name MFR Density ESCR, 25%Igepal FM Notch IZOD 23 oC Recommended Applications Key Characteristics
(g/10min) (g/cm3) (hr, F50) (kg/cm2) (kg.cm/cm)
H6105JU 5.5 0.961 300 13000 3.5 General outdoor appliances Weathering resistance, wide
survice temperature range, good
rigidity
H5814J 14.0 0.958 280 12500 3.0 General injection parts, bottle cap and Good processibility, good
closure, toy stiffness and impact strenght
H5818J 18.0 0.962 280 13000 2.5 General injection parts, bottle cap and Good processibility, good
closure, toy stiffness and impact strengh
H6007JU 7.5 0.964 310 13500 3.5 Crate, Pallet, Industrial parts for weathering resistance, high
outdoor uses rigidity and impact strengh
Blow Molding & Monofilament/Flat Yarn
H6670B 0.70 0.966 24 15000 15 Suitable for high speed machine,
excellent processability and
Bottle for drinking water, fruit juice,
excellent stiffness.
soft drink and milk, etc.
H6430BM 0.40 0.966 24 15000 25 Good processability and excellent
stiffness.
H6140B 0.30 0.962 100 13000 10 Good processability, stiffness and
Bottle for milk, detergent, cosmetics, ESCR.
H5840B 0.40 0.958 300 12000 10 lube oil and chemical, etc. Excellent ESCR and good
processability.
H5480S 0.80 0.954 390 10000 17 Net, ropes and tarpaulin (Monofilament High tenacity, good product
and flat yarn extrusion) color, food contact applicable.

Cap and Closure

Product Name MFR Density FM Notch IZOD 23 oC ESCR, 10%Igepal Recommended Applications Key Characteristics
(g/10min) (g/cm3) (kg/cm2) (kg.cm/cm) (hr, F50)
H655JA 0.4 0.958 12000 10 400 Excellent ESCR, specially
Cap for carbonated soft drink designed to serve lightweight
cap. Durable to high pressure
and CO2 content.
H555J 1.8 0.956 11000 8 20 Durable to high pressure and
CO2 content. With slip agent for
Cap for carbonated soft drink, juice,
good opening torque.
stilled water and mineral water
H555JA 1.8 0.956 11000 8 20 Durable to high pressure and
CO2 content.
H455JA 4.5 0.961 12500 4 7 Good processability and well
balance mechanical strength.
H355JA 7.5 0.958 13500 3.5 6 Cap for juice, stilled water and mineral High stiffness and good
water processability.
H255JA 11 0.958 11500 3 5 Excellent flowability and high
energy saving for processing.

Linear Low Density Polyethylene

EL-Lene LLDPE is Linear Low Density Polyethylene resin produced by the gas phase process, a technology developed by BP Chemicals Co.,Ltd.,England

Film
Product Name MFR Density TS Tear Strength Dart Impact Recommended Applications Key Characteristics
 (g/10min) (g/cm3) (kg/cm2) (g) (g)
L2009FA 1.0 0.919 MD: 380, TD: 350 MD: 145, TD: 370 130 General purpose bag High productivity and can be
blended with HDPE, LDPE to
improve tear resistance and seal
No slip/antiblock
L2009F 1.0 0.919 MD: 380, TD: 350 MD: 145, TD: 370 130 General purpose bag High productivity and can be
blended with HDPE, LDPE to
improve tear resistance and seal
Medium slip/ antiblock
L1810F 1.0 0.919 MD: 470, TD: 170 MD: 145, TD: 370 130 General purpose bag High productivity and can be
blended with HDPE, LDPE to
improve tear resistance and seal
strength
High slip/ antiblock
L1810FI 1.0 0.919 MD: 470, TD: 170 MD: 145, TD: 370 130 Water-quenched blown film for High clarity and good openability
vegetable or fruit packaging
Very high slip/antiblock
L2020F 2.0 0.920 MD: 220, TD: 130 MD: 125, TD: 330 90 Cast film for general purpose bag High output and elongation

* tested by 38 micron film thickness Medium slip/antiblock

Low Density Polyethylene

EL-Lene LDPE is low density polyethylene resin produced by the autoclave process,
a technology developed by ICI Co.,Ltd., England

Film
Product Name MFR Density TS Tear Strength Dart Impact Recommended Applications Key Characteristics
(g/10min) (g/cm3) (kg/cm2) (g) (g)
LD1902FA 2.0 0.919 MD: 230, TD: 190 MD: 370, TD: 100 150 General purpose bag and medium High strength and good optical
weight shrink film properties, no slip/antiblock
LD1902F 2.0 0.919 MD: 230, TD: 190 MD: 370, TD: 100 150 General purpose bag (for blending with High strength and good optical
other PE) properties ,medium slip/antiblock
LD2305F 3.5 0.923 MD: 240, TD: 190 MD: 400, TD: 275 78 Zip bags and general purpose film Excellent clarity and gloss,
medium slip/ antiblock
LD1905FA 5.0 0.919 MD: 200, TD: 150 MD: 370, TD: 210 130 Foam, bubble sheet, shoe sole, and High productivity and good
general purpose bag (for blending with optical properties, slip/ antiblock
other PE)
LD1905F 5.0 0.919 MD: 200, TD: 150 MD: 370, TD: 210 130 General purpose bag (for blending with High productivity and good
other PE) optical properties, medium
* tested by 38 micron film thickness

Extrusion Coating
Product Name MFR Density TS Tear Strength Dart Impact Recommended Applications Key Characteristics
(g/10min) (g/cm3) 2
(kg/cm ) (g) (g)
D477C 4.0 0.922 MD: 224, TD: 159 MD: 285, TD: 122 123 Excellent neck-in with high seal
Coating/lamination on various
strength, film stiffness and low
substrates such as plastic film,
surface friction
aluminium foil, card board, woven
D777C 7.0 0.918 MD: 190, TD: 140 MD: 280, TD: 120 76 Excellent neck-in, web stability
sheet etc. for flexible packaging,
and low set up time for low waste
release liners, woven sack, industrial
D795C 9.0 0.918 MD: 160, TD: 150 MD: 280, TD: 120 72 High draw ability for thin film
wrapping, folding carton etc.
coating and high speed coating
* tested by 38 micron film thickness

Injection Molding
o
Product Name MFR Density TS FM Notch IZOD 23 C Recommended Applications Key Characteristics
(g/10min) (g/cm3) (kg/cm2) (kg/cm2) (kg.cm/cm)
LD1630J 30 0.916 90 1700 Non Break Housewears, closure, toy parts, and Good flowability, good toughness
masterbatch and flexibility