Annexure-1: Propel Equipment’s Technical Specification

TRACK MOUNTED PRIMARY CRUSHER - TMJ 811

Jaw Crusher
Model AVJ 811 (S)
Opening Size 1064mm X 750mm (41.9" x 29.5")
CSS Range 75-200 mm
Capacity 150 - 400 TPH
Hopper
Hopper Capacity 10 m³
Hydraulically Folding Sides And Rear
Grizzly Feeder
Model AVGF 1142-V2
Size 1100 mm x 4200 mm
Main Conveyor
Belt Width 1000 mm (40")
Discharge Height 3850 mm
Stock Pile Capacity 85 m³ @ 40°
Working Angle 21°
Main Conveyor Features
 Impact Bars And Wear Resistant Grating at Feed Point
 Folding Top Sector; Low Level Greasing

*These figures are indicative because they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

 Full Length Skirts

 Maintenance free Motorized head drum. (Need to change lube oil periodically)
Bypass Conveyor
Belt Width 650 mm
Standard Discharge Height 2100 mm
Stock Pile Capacity 13.7 m³ @ 40°
Power Unit
Cummins QSL9 Engine With Stamford Alternator.
Diesel Tank Capacity 500 liters
Under Carriage
Shoe Width 500 mm (20'')
Grade ability 17°
Speed 0.63 kmph
Hyd. Tank Capacity 390 liters
Hydraulic Pump Motor
55 kW
(Tracking & Folding)
Electrical Motor Details
Crusher Motor 110 kW
Grizzly Feeder 2 x 4.3 kW
Main Conveyor 11 kW Motorized pulley
Bypass Conveyor 3 kW Motorized pulley
Features
 Heavy Duty Track Unit
 Safety Guards In Compliance To Machinery Directive Sturdy Catwalk With Handrails,
Kick Board And Access Ladders
 Electrically Driven Power Systems Provide Significant Cost Advantages And Efficiencies
 Four Point Emergency Stop
 Detachable Dog lead Control For Tracking
 Robust Heavy Duty Chassis With Catwalk Access On Both Sides Of The Machine
Dimensions
Transport (L x W x H) 14930 mm x 3400 mm x 4100 mm
Working (L x W x H) 16900 mm x 5770 mm x 5100 mm
Transport Weight 55 Ton

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

Additional Features Included:

1) Optional Dust Suppression System (Spray Bar)

Spray Bar Water Pump 1.0 kW

2) Flexibility To Power The Plant Either By Electric Connection Or By Onboard Genset Power
Pack Unit
3) Radio Remote Control Tracking
4) Light Mast
5) VFD for Grizzly Feeder

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

TRACK MOUNTED SECONDARY CRUSHER – QM 250

Cone Crusher
Model QM 250
Feed Opening 220mm (8.7”)
CSS Range (Hydraulically
26-45 mm
Adjustable)
 Hydraulic Tramp Release System
Capacity 150-380 TPH
Hopper / Feeder
Hopper Capacity 6.0 m³
Feeder Belt Width 1000 mm (40″)
Working Angle 23°
Feed Height 3130 mm
Hopper / Feeder Features
 Raise / Lower Hydraulically For Transport
 Crash Bar Fitted To Reduce Impact On Feed Conveyor
 Variable Speed Feed Conveyor
 Rubber Covered Impact Rollers
 Full Length Skirting Up to Head Drum
 Metal Detector with ‘AUTO-STOP’ feature
 Low Level Greasing To All Bearings

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

 Feed level Sensor for Cone Crusher

Main Conveyor
Belt Width 1000 mm (40")
Discharge Height 3600 mm
Working Angle 24°
Stock Pile Capacity 69.4 m³ @ 40°
Power Unit

Cummins QSL9 Engine With Stamford Alternator.

Diesel Tank Capacity 500 liters

Under Carriage
Shoe Width 500 mm (20'')
Grade ability 21°
Speed 0.63 kmph
Hyd. Tank Capacity 390 liters
Hydraulic Pump Motor
55 kW
(Tracking & Folding)
Electrical Motor Details
Crusher Motor 187 kW
Belt Feeder 11 kW Motorized pulley
Main Conveyor 11 kW Motorized pulley
Cone Crusher Power Pack
Lubrication System 7.5 kW
Hydraulic System 7.5 kW
Air Blast Cooler 2.2 kW
Features
 Drop Down Rear Door for Hopper
 Safety Guards In Compliance To Machinery Directive Sturdy Catwalk With Handrails,
Kick Board And Access Ladders
 Electrically Driven Power Systems Provide Significant Cost Advantages And Efficiencies
 Four Point Emergency Stop
 Detachable Dog lead Control For Tracking
 Robust Heavy Duty Chassis With Catwalk Access On Both Sides of the Machine

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

Dimensions
Transport (L X W X H) 15810 mm x 3400 mm x 4050 mm
Working (L X W X H) 17815 mm x 4760 mm x 4800 mm
Transport Weight 48 Ton
Additional Features Included:
1) Spray Bar Water Pump : 1.0 kW
2) Flexibility To Power The Plant Either By Electric Connection Or By Onboard Genset Power
Pack Unit
3) Radio Remote Control Tracking
4) Light Mast

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

TRACK MOUNTED SCREEN TMS 1561 - 3D (With Tipping Grid)

Vibrating Screen
Model TMS 1561
Top & Middle Deck Size 6120 mm x 1550 mm
Bottom Deck Size 5500 mm x 1550 mm
Drive Power 18.5 kw
Drive System Oil Lubricated Independent Bearing Cartridge
Capacity Up to 500 TPH
Feed Size Up to 150mm
Operating Angle 16° - 20°
Speed Control Variable
Tipping Grid & Hopper
Target area 4.35 m x 1.8 m
Hopper Capacity 6 m³
Feed Height - Rear 3.70 m
Feed Height - Side 3.47 m
Tipping Grid Variable operating angle with integrated wings
Feed Conveyor
Belt Width 1000 mm (40'')
*These figures are indicative as they vary depending on application
NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

EP 500/3 with 5 mm top and 1.5 mm bottom

Length (Drum Centers) 4200 mm
Electric Motor 5.5kW Motorized pulley
Head Drum Diameter 343 mm(13.5”)
Tail Drum Diameter 320 mm (12.5”)
Speed Control Variable
Main Conveyor
1000 mm (40")
Belt Width
EP 500/3 with 5 mm top and 1.5 mm bottom
Length (Drum Centers) 12080 mm
Angle Adjustment 22° to 27°
Electric Motor 11 kW Motorised pulley
Head Drum Diameter 293 mm(11.5”)
Tail Drum Diameter 273 mm (10.5”)
Speed Control Fixed
Rises up for quick mesh replacement in top deck, Fully
Hydraulic Adjustable
skirted and sealed to avoid material spillages
Oversize Side Conveyor
650 mm (26")
Belt Width
EP 315/3 with 3 mm top and 1.5 mm bottom
Length (Drum Centers) 9300 mm
Discharge Height 4.0 m
Stock Pile Capacity 95 m³@ 40°
Conveyor Angle 25° (Fixed)
Electric Motor 5.5kW Motorized pulley
Head Drum Diameter 293 mm(11.5”)
Tail Drum Diameter 203 mm (8”)
Speed Control Fixed
Midsize Side Conveyor
650 mm (26")
Belt Width
EP 315/3 with 3 mm top and 1.5 mm bottom
Length (Drum Centers) 9625 mm
Discharge Height 4.8 m

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

Stock Pile Capacity 157 m³ @ 40°

Conveyor Angle 25° (Fixed)
Electric Motor 5.5kW Motorized pulley
Head Drum Diameter 332 mm(13”)
Tail Drum Diameter 273 mm (10.5”)
Speed Control Variable
Gets folded in transport mode, Well skirted and sealed
Hydraulically Foldable
to avoid material spillages
Bottom Deck Side Conveyor
650 mm (26")
Belt Width
EP 315/3 with 3 mm top and 1.5 mm bottom
Length (Drum Centers) 9625 mm
Discharge Height 4.8 m
Stock Pile Capacity 157 m³ @ 40°
Conveyor Angle 25° (Fixed)
Electric Motor 5.5kW Motorized pulley
Head Drum Diameter 332 mm(13”)
Tail Drum Diameter 273 mm (10.5”)
Speed Control Variable
Gets folded in transport mode, Well skirted and sealed
Hydraulically Foldable
to avoid material spillages
Under Size Product Conveyor
12000 mm (48")
Belt Width
EP 500/3 with 5 mm top and 1.5 mm bottom
Length (Drum Centers) 9250 mm
Discharge Height 4.2 m
Stock Pile Capacity 115 m³@ 40°
Conveyor Angle 0 to 25° (Adjustable)
Electric Motor 5.5 kW Motorised pulley
Head Drum Diameter 375mm (15”)
Tail Drum Diameter 270mm (10”)
Speed Control Fixed
Hydraulic Adjustable & Foldable Lowers down for quick mesh replacement in bottom

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

deck, Fully skirted and sealed to avoid material spillages

Extended Auxiliary Conveyor: (Optional)
Belt Width 650 mm (26")
Length (Drum Centers) 11250 mm
Discharge Height 5.44 m
Stock Pile Capacity 240 m³@ 40°
Electric Motor 5.5kW Motorized pulley
Head Drum Diameter 286mm (11”)
Tail Drum Diameter 270mm (10”)
Speed Control Fixed
Power Unit
Volvo Eicher Commercial Vehicles (VECV) EE694 TCI Engine With Leroy Somer Alternator
Diesel Tank Capacity 350 liters
Hydraulic Oil 400 liters
Emission Compliance CPCB II
Hydraulic Pump for set-up &
55 kW
marching
Under Carriage
Shoe Width 500 mm (20'')
Grade ability 25°
Speed 0.67 kmph
Hyd. Tank Capacity 400 liters
Hydraulic Pump Motor
55 kW
(Tracking & Folding)
Features
 Heavy Screening Capacity
 Engine Overload Protection System
 Maximum Mobility And Heavy Duty Crawler Tracks
 Detachable Dog lead Control System For Tracking
 Quick Set Up By Hydraulic System
 Fines Conveyor Drop Down Facility To Access Bottom Deck
 Extra Heavy Duty, Single Start, Oil Lubricated, Adjustable Angle, Variable Speed,
Multi Stroke Screening Unit
*These figures are indicative as they vary depending on application
NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.
Annexure-1: Propel Equipment’s Technical Specification

 Main Conveyor lift up Facility to access top Deck

 Electrical driven Hydraulic System For Marching & Setup
Dimensions
Transport (L X W X H) 19500 mm x 3425 mm x 4100 mm
Working (L X W X H) 20200 mm x 19500 mm x 6000 mm
Operational Dimension
24825 mm x 31550 mm x 6365 mm
(including Stockpile)
Transport Weight 42 Ton
Additional Features Included
1) Spray Bar Water Pump : 1.0 kW
2) Flexibility To Power The Plant Either By Electric Connection Or By Onboard Genset
Power Pack Unit
3) Radio Remote Control Tracking
4) Light Mast

*These figures are indicative as they vary depending on application

NOTE: DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE AND WILL BE CHANGED WITHOUT PRIOR
NOTICE BY PROPEL INDUSTRIES PVT LTD, DURING DETAILED ENGINEERING.