Enraf Servo Gauge 854 ATG

Setting the standard in gauging.

From the company that pioneered development of modern tank
gauges, Honeywell’s 854 Automatic Tank Gauge has become an
industry standard all over the world. The gauge is multi-functional:
besides liquid level, it integrates density and (free) water interface
level measurement with the highest accuracy available in the
marketplace. Reliable, versatile and accurate, it meets all international
standards, and with its Servo Auto Test feature you can use it in overfill protection loops
to prevent spillage. A unique, simple software add-on can be loaded on any servo 854
to add diagnostics and allow it to be used in SIL rated loops. With these diagnostics,
the safety proof-test interval can be extended to 5 years. Together with a design
featuring minimum moving parts and a modular construction for easy maintenance,
it helps you drive down operational costs.
Global Experience. Locally Applied.
Technical Specifications
Measuring Specifications
Measuring range
Standard 27 m (88 ft) Pos 12 = 2, A, B, C or D
Extended 37 m (121 ft) Pos 12 = 3, K, L, M or N;
35 m (115 ft) (with measuring wire up to 150 m (492 ft)) Pos 12 = 9;
For longer ranges, please contact factory
Measuring accuracy level (27 m / 88 ft): < ± 0.4 mm (± 0.016”) *1; (37 m / 121 ft): < ± 0.7 mm (± 0.028”) *1
Measuring accuracy interface < ± 2 mm (± 0.08”) *2
Measuring accuracy servo density < ± 3 kg/m3 (± 0.19 lb/ft3 )
Measuring accuracy temperature < ± 0.1 °C (± 0.18 °F) *1, *4
Sensitivity ≤ 0.1 mm (± 0.004”) *1
Repeatability ≤ 0.1 mm (± 0.004”) *1
Mechanical
Flange See ‘Identification Code’ Pos 8-10
Dimensions See ‘Dimensional Drawing’
Weight
Medium pressure version 16 kg (35 lb)
Chemical version 21 kg (46 lb)
High pressure version 26 kg (57 lb)
Cable entries 4 x ¾” NPT threaded (2* I.S. + 2* non-I.S.)
Process
Operating pressure
M and C versions Up to 6 bar / 0.6 MPa (90 psi); Pos 8
H version Up to 40 bar / 4 MPa (600 psi) (up to 25 bar / 2.5 MPa in acc. to PED); Pos 8
Temperature
Max. process temperature +200 °C (+392 °F), drum housing has to be kept below +65 °C (+149 °F) *7
Min. process temperature -200 °C (-328 °F), drum housing has to be kept above -40 °C (-40 °F) *7
Process Wetted Materials
Drum compartment Cast aluminum Int. reg. AA A356 EN1706 AC-AlSi7Mg0.3; Pos 8 = M
Stainless steel ASTM A351, CF-8M, G-X6 CrNiMo 18 10 (1.4408); Pos 8 = H or C
Measuring drum, drum shaft Stainless steel (1.4401) EN10088 AISI 316
Measuring wire See ‘Identification Code’; Pos 12
Magnet cap Stainless steel (1.4401) EN10088 AISI 316
O-rings Drum cover Silicone/FEP; others FPN (Viton®); Special O-ring (Perlas®) available for
demanding chemical applications (such as Ammonia), part nr. S0854969
Enclosure Materials
Servo comp. and cover All types cast aluminum Int. reg. AA A356 EN1706 AC-AlSi7Mg0.3
Finish aluminum parts Conforms to MIL-DTL-5541F
Environmental Safety
Ambient temperature -40 °C to +65 °C (-40 °F to +149 °F)
Storage temperature -50 °C to +70 °C (-58 °F to +158 °F)
Protection class IP66 / IP67 according to EN 60529 (NEMA 4X)
Safety Explosion proof
– II 1/2 G Ex d IIB T6 Ga/Gb or Ex de IIB T6 Ga/Gb or Ex d [ia Ga] IIB T6 Ga/Gb or
Ex de [ia Ga] IIB T6 Ga/Gb; acc. to ATEX KEMA
– Ex d IIB T6 Ga/Gb or Ex de IIB T6 Ga/Gb or Ex d [ia Ga] IIB T6 Ga/Gb or
Ex de [ia Ga] IIB T6 Ga/Gb; acc. to IECEx KEMA
– II 1/2 G Ex de [ia Ga] IIB T6 Ga/Gb, acc. to Kosha certificate;
– Class I, Division 1, Group C & D; acc. to FM
– Class I, Group C & D acc. to CSA certificate
– Ex d IIB T6 Ga/Gb or Ex de IIB T6 Ga/Gb or Ex d [ia Ga] IIB T6 Ga/Gb or
Ex de [ia Ga] IIB T6 Ga/Gb; acc. to INMETRO TÜV
Consult factory for other approvals and updates
Electrical
Power supply 110/130/220 Vac (-20% to +10%), 230 Vac (±15%), 65 Vac (-20% to +10%),
also suitable for 240 Vac (-20% to +10%) if Pos 14 = K
Frequency variations 50/60 Hz (±10%)
Power rating 25 VAmax, Imax = 2 A (startup current)
Functional Safety
Configuration TÜV certified for SIL 2 (single configuration) and SIL 3 (redundant configuration)
Technical Specifications (continued)
Data Communication
Honeywell Bi-phase mark (Pos 2 = E and I)
Baud rate 1200 / 2400 bps
Isolation voltage > 1,500 V
Lightning protection Full galvanic separation via isolating transformers
Protocol Standard Honeywell fieldbus (Serial, ASCII, GPU protocol)
Common mode rejection > 150 dB
Cabling Two wires, twisted pair, Rmax = 200 Ω / line, Cmax = 1 μF; Cable length: 10 km (6 mi) or more *6
RS-232C GPU protocol (Pos 2 = R)
Baud rate 1200 / 2400 / 4800 / 9600 / 19200 bps
Isolation voltage > 600 V
Lightning protection Opto-isolators
Protocol Serial ASCII GPU protocol
Cabling 3-wire RS-232; max cable length: 15 m (50 ft)
RS-485 GPU protocol (Pos 2 = S)
Baud rate 1200 / 2400 / 4800 / 9600 / 19200 bps
Isolation voltage > 600 V
Lightning protection Opto-isolators
Protocol Serial ASCII GPU protocol
Cabling 3-wire EIA-485; max cable length: 1200 m (4000 ft)
RS-232C Std. Modbus (Pos 2 = V)
Baud rate 1200 / 2400 / 4800 / 9600 / 19200 bps
Isolation voltage > 600 V
Lightning protection Opto-isolators
Protocol Std Modbus (refer to protocol manual for details)
Cabling 3-wire RS-232; max cable length: 15 m (50 ft)
RS-485 Std. Modbus (Pos 2 = W)
Baud rate 1200 / 2400 / 4800 / 9600 / 19200 bps
Isolation voltage > 600 V
Lightning protection Opto-isolators
Protocol Std Modbus (refer to protocol manual for details)
Cabling 3-wire EIA-485; max cable length: 1200 m (4000 ft)
Foundation™ Fieldbus (Pos 2 = O)
Baud rate 31.25 kbps
Isolation voltage > 1500 V
Lightning protection Opto-isolators
Protocol FF (refer to protocol manual for details)
Cabling Refer FF specifications
Communication with TSI (Pos 2 = I)
Cabling 2-wire, intrinsically safe (Rmax = 5Ω (loop) / line, Cmax = 1.27μF)
Communication with Portable Honeywell Terminal
Protocol Infra-red, serial
Options
Alarm relay outputs 2 x SPDT, galvanically isolated, Vmax = 50 Vac or 30 Vdc, Imax = 3 A; Pos 16 = W
Density measurement With density PROMS (Pos 15 = D) and density displacer (Pos 22 = E or F)
Analog level output 4 - 20 mA (accuracy ± 0.1% full scale); Pos 4 = V, W, X or Y
Temperature input and HART devices Spot RTD; 3 wire; Pos 4 = B, U or Y; VITO probes for average temperature and/or
water measurement, HART® devices; Pos 4 = C, J, W, X or Y
Cable entries Adapters available to fit other sizes cable glands

Notes:
HART® is a registered trademark of the *3
(optional) with a density displacer and *6
Distances of more than 10 km possible
HART Communications Foundation. calibrated for density measurement depending on amount of field instruments
Foundation™ Fieldbus is a trademark of *4
With VITO temperature probe or spot (Pt100) and cabling topology.
the Fieldbus Foundation. *5
Servo ATG can be used in safety rated loops
*7
In extreme environments the accuracy
*1
Under reference conditions using alarm relays and/or analog output. could be affected depending on the thermal
*2
Minimum product density between Please refer to Safety Manual. expansion coefficient of the wetted parts.
layers: 100 kg/m3 (6.25 lb/ft3)
Identification Code
Pos 1 Type of Gauge
U No W&M approval required, with drum calibration report
X W&M type approved up to 27 m (88 ft) with OIML R85 calibration report and sealing facilities (only if Pos 22 = A, B or E) *6, *7
P W&M type approved up to 37 m (121 ft) with OIML R85 calibration report and sealing facilities (only if Pos 22 = A, B or E) *5, *6, *7
Pos 2 Data Transmission
E Honeyweell Fieldbus Bi-phase Mark (BPM) GPU protocol
I Bi-phase Mark (BPM) + I.S. output for tank side indicator 977
R RS-232C GPU protocol (only when Pos 4 = B, C, J, U or Z)
S RS-485 GPU protocol (only when Pos 4 = B, C, J, U or Z)
V RS-232C standard Modbus (only when Pos 4 = B, C, J, U or Z)
W RS-485 standard Modbus (only when Pos 4 = B, C, J, U or Z)
O Foundation Fieldbus + BPM
Pos 3 Display
A 2 lines x 16 characters LCD
Pos 4 I/O Options
Z No I/O options
B Spot temp. convertor Pt-100 (Ex ia)
C VITO temp. and/or water sensor
J VITO temp. and/or water sensor + HART device(s)
U Spot temp. convertor Pt-100 (Ex ia) + HART device(s)
V 4-20 mA level output
W 4-20 mA level output + VITO temp. and/or water probe
X 4-20 mA level output + VITO temp. probe
Y 4-20 mA level output + Spot temp. convertor Pt-100 (Ex ia) + VITO temp. and/or water probe + HART device(s)
Pos 5, 6, 7 Product Designation
8 5 4 Servo Gauge ATG
Pos 8, 9, 10 Pressure, Drum Compartment & Flange
M 2 1 2” Class 150 FF, Flanges acc. ASME B16.5, (Ra=3.2-6.3 µm), AL*1
M 2 2 DN50, PN 6, Flanges acc. EN 1092-4, (Ra=3.2-12.5 µm), AL*1
C 1 1 2” Class 150 RF, Flanges acc. ASME B16.5, (Ra=3.2-6.3 µm), AISI 316 *1
C 1 2 DN50, PN 6, Flanges acc. EN 1092-1, (Ra=3.2-12.5 µm), AISI 316 *1
C 1 3 2” Class 150 FF, Flanges acc. ASME B16.5, (Ra=3.2-6.3 µm), AISI 316 *1
H 5 2 2” Class 300 RF, Flanges acc. ASME B16.5, (Ra=3.2-6.3 µm), AISI 316 *2
H 5 3 DN50, PN 40, Flanges acc. EN 1092-1, (Ra=3.2-12.5 µm), AISI 316 *2
Pos 11 Safety Approvals
A ATEX / IECEx Europe
C CSA Canada
F FM USA
I INMETRO Brazil
K Kosha Korea
Pos 12 Measuring Range & Wire Material
2 27 m (88 ft) AISI 316
A 27 m (88 ft) Hastelloy C22
B 27 m (88 ft) Tantalum
C 27 m (88 ft) Invar
D 27 m (88 ft) Pt / Ir (80% / 20%) only available in US
3 37 m (121 ft) AISI 316
K 37 m (121 ft) Hastelloy C22
L 37 m (121 ft) Tantalum
M 37 m (121 ft) Invar
N 37 m (121 ft) Pt / Ir (80% / 20%) only available in US
9 150 m (492 ft) AISI 316 *3

continued
Identification Code (continued)

Pos 13 Purge Connection

No purge connection
L 1/4” BSP entry
Pos 14 Main Supply
A 220 V 50/60 Hz
C 110 V 50/60 Hz
K 230 V 50/60 Hz
R 130 V 50/60 Hz
S 65 V 50/60 Hz
Pos 15 Density Measurement
No
* density option
D With Density PROMS *4 (Pos 22 = E or F)
Pos 16 Hardware Alarms
Z No hardware alarms
W 2 hardware alarms (SPDT, NO/NC)
Pos 17 Separator
/
Pos 18 Tag Plate
Z No tag plate
T Tag Plate (Material: CuNi alloy)
Pos 19, 20 and 21 Not used
Pos 22 Displacer
Z None
A U815C/223/CT/110 carbon filled Hostaflon®
PTFE, weight 223 g; diameter 110 mm
B U815C/223/CT/90 carbon filled Hostaflon®
PTFE, weight 223 g; diameter 90 mm
C U815C/223/CT/45 carbon filled Hostaflon®
PTFE, weight 223 g; diameter 45 mm
D U815C/223/CT/25 carbon filled Hostaflon®
PTFE, weight 223 g; diameter 25 mm
E U815C/260/S/90 AISI 316; weight 260 g;
max pressure 20 barg; diameter 90 mm
F U815C/260/S/45 AISI 316; weight 260 g;
max pressure 20 barg; diameter 45 mm

U E A Z 8 5 4 M 2 1 A 2 * A D W / Z A Typical Identification Code

A 8 5 4 / Your Identification Code

Notes:
Blue positions: Normal delivery
Orange positions: For lead time please consult factory or contact your local sales office

*1
Maximum operating pressure is 600 kPa
*2
Maximum operating pressure is 4 MPa
*3
Measuring range is limited to 35 m for ±1 mm accuracy
*4
Density displacer required (Pos. 22 = E or F)
*5
Contact factory for longer measuring ranges
*6
For witnessed verification specify authority. For more information please contact factory. Additional costs not included.
*7
Displacer diameter should be selected on basis of (legal) accuracy requirements, operational density range and installation conditions.
Dimensional Drawing

2 cable entries 3/4” NPT

for non i.s. wiring.
2 cable entries 3/4” NPT
436 mm (17 3/16” )
for i.s. wiring.
82 mm (3 1/4” ) 352 mm (13 7/8” ) 233 mm (9 3/16”)

Hoisting eye infra-red

coupling

100 mm

“B”
(4”)
free space
for IR
connection

200 mm
(7 7/8” ) Ref. to the instr. code Pos. 9, 10
(space needed to for the flanges available.
remove cover)
Position of measuring wire with
44 mm displacer in top position.
(1 3/4” )

“B”
M and C versions 427 mm (16 13/16”)
H versions 449 mm (17 11/16”)

All technical specifications are subject to change without notice.

For More Information

To learn more about Honeywell solutions,
visit www.honeywellprocess.com or contact
your Honeywell account manager.

Americas Asia Pacific

Honeywell Americas, Inc. Honeywell Pte Ltd.
2000 Northfield Ct. 17 Changi Business Park Central 1
Roswell, GA 30076 Singapore 486073
USA Phone: +65 6355 2828
Phone: +1 770 475 1900 Email: [email protected]
Email: [email protected]

Europe, Middle East and Africa

Honeywell
Delftechpark 39
2628 XJ Delft
The Netherlands
Phone: +31 (0)15 2701 100 EN-09-14-ENG Rev.5
February 2016
Email: [email protected] © 2016 Honeywell International Inc.