GRILLES

Adjustable Blade Grilles

Fixed Blade Grilles
Door Grilles
Floor Grilles
Aircell Polymer Range
 Why Waterloo
2
Reliability
To reliably give your client the service and support they expect, you need confidence that your suppliers will
compliment and support your own professionalism. Waterloo’s World Class attitudes and beliefs provide this
confidence.
World-Class is not a reflection of size or number of employees, it is to do with values such as flexibility, innovation, customer
service, integrity, strength of character and good humour. These are the values that separate the outstanding from the
ordinary.

Innovation
Some projects are common place, but as the possibilities of building design are pushed to wider and wider
boundaries you need to continually search for technically and cost effective solutions to give satisfaction to
your client. Waterloo is committed to constant innovation to provide you with those solutions.
We at Waterloo challenge accepted knowledge and use our understanding and learning to sustain our reputation for technical
excellence and continually develop one of the widest ranges of air terminal devices in the world. For over 100 years Waterloo
have actively pioneered the use of innovative manufacturing techniques, an approach that is still integral to the way we work
today.

Quick Delivery
When you are working on fast track projects (or just dealing with unexpected site requirements) you need
confidence that your supplier understands and can respond with the required urgency. To give you complete
support, Waterloo obsessively maintains high delivery and quality performance.
Waterloo has a well justified reputation throughout the construction industry for very quick service – when others might offer
four or six weeks delivery periods, Waterloo prides itself in delivering most small and medium orders in five (yes, five) days.

Flexibility
In an ideal world all projects would commence with the entire design complete and documented. Until then,
to give your client maximum confidence and satisfaction, Waterloo’s renowned flexibility is at your service.
Unanticipated design issues or site conditions might require complex but timely solutions to exceptional problems. Waterloo’s
flexibility is founded on our wealth of experience, the fluency and knowledge of our highly-skilled staff and our willingness
to explore new ways of working, and our desire to share with you the benefits of our expertise in construction, design,
management, planning, procurement and programming.

Specials as Standard
Architectural design is continually developing and the tasks of interpreting the requirements and providing
cost effective and practical solutions become more important. Waterloo’s complimentary made-to-order pro-
gramme and fluency with the design and manufacture of bespoke air terminal devices will allow you to realise
your vision or solve unanticipated problems on site.

Symbols Used
T Maximum Throw (for air velocity of 0.15 m/s) in occupied zone in isothermal conditions (unless otherwise
stated) [m]
vt Terminal Velocity [m/s]
v Air Velocity 25 mm from the grille face [m/s]
LWA dBA level is based on a room absorption of 8 dB for sound power ref 10 -12 W
qv Air Volume [l/s] or [m3/h]
Ps Static Pressure [Pa]
W Width [mm]
H Height [mm]
 Grilles
3
Contents
Grilles
Adjustable Blade Grilles
1H, 1V, 2H, 2V Single and Double Deflection Grilles 4
1HM, 1VM, 2HM, 2VM Lever-operated Adjustable Blade Grilles 5
1KH, 1KV, 2KH, 2KV Heavy Duty Adjustable Blade Grilles 6
1RV, 2RV Adjustable Duct Grilles 7
RTC, 2RTC, RRTC Reversible Core Grilles 8

Fixed Blade Grilles

3HF, 3HG, 3HJ, GC5, PER Exhaust Grilles 12
SG1, SG2, SG3 Security Grilles 13
ALN, ALM, ALF, ALG, ALJ Airline Linear Grilles 14
APF, APG, APJ, APN, APM Plasterline Linear Grilles 16
UC / UF / UE Urban Grilles 17

Door / Sidewall Grilles

NS, DV, NSNL Air Transfer Grilles 18
DSR, DSRX Acoustic Air Transfer Grilles 19
WPT Sidewall Grilles 20
WFV, WFVG Fire Rated Air Transfer Grilles 21

Floor Grilles
AFG Exhaust Grilles 22
HDFG Heavy Duty Floor Grille - Tile Replacement 23
HDFG-L Heavy Duty Floor Grilles - Linear 24

Aircell Polymer Grilles

Aircell S, D, G, A, T, E Aircell Polymer Grilles 26
Aircell N, Aircell GO Neck Reducers, Opposed Blade Dampers 28
OBSS Aluminium Opposed Blade Damper for E600 28

Technical Information
PBG, FDC, FDQ, OBCO, OBSS Grille Plenum Chambers, Plenum Control Options 29
Fixing Options, OBSS, ED Various, Volume Dampers 30
Grille Fixing Selection, Removable Cores  31
Technical Information  32
 Grilles
4
Adjustable Blade Grilles
1H / 1V / 2H / 2V
Introduction
The Waterloo adjustable, single and double deflection, grilles
are suitable for duct, ceiling and sidewall applications in
most commercial projects. The grille vanes are individually
adjustable to allow jet spread or deflection to be set within
45° of the duct axis.
Product Description
1H Single set of horizontal blades
1V Single set of vertical blades
2H Double set of blades with front set horizontal
2V Double set of blades with front set vertical
OBSS Allen key operated opposed blade damper
Please refer to pages 29 - 31 for full details of:
ED Equalising deflector Free Area
Fixing Options
DT-2M Adjustable duct turn (Installed in duct) 1H/1V 2H/2V Control Options
Features 74% 66% Sub Frames
• Single or double deflection for complete air pattern control Sizing Implications
• Teardrop blade for quiet operation but maximum induction Border Options
Finishes
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
PPM9010 (RAL 9010 Matt - 20% Gloss White)
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Other colours or anodised finish available on request
Weights
19

19
Nom. - 25

Nom. - 25

Nom. - 25

Nom. - 25
1H /1V 8.5 kg/m2 face area
2H/2V 12.0 kg/m2 face area

Nom.

Nom.
OBSS/ED 9.5 kg/m2 face area
DT2M 9.0 kg/m2 face area
Sizes
Minimum Size - 75 x 75
Maximum Size - 1500 x 1200
Fixing Options
SF CF CRB VS AFVS
PFVS RCHS AFHS AFCF RCCF 70 86 5 27 5 43
BSSBD (Open) (Open)
BSSBP (NOT for 2H or 2V) 1H + OBSS 2H + OBSS 1V 2V

dBA and Static Pressure (Ps) Correction Factors for Grilles with an Open Damper

Grille Width 100+ 125+ 150+ 200+ 250+ 300+ 350+ 450+ 550+ 600+ 700+ 850+ >1000

Lw Addition (CL) 10 9 8 7 6 5 4 4 4 3 3 3 2

Ps Multiplier (CP) 2.5 2.4 2.2 2.0 1.9 1.8 1.7 1.6 1.5 1.5 1.4 1.3 1.2

Selection Criteria
Performance data is based on grilles situated Performance Nomogram
within 0.3m of ceiling with supply air at a 10°C
AIR FLOW NOMINAL NOMINAL
cooling differential. Throw is the horizontal RATE WIDTH HEIGHT
distance from the grille face to the point (l/s) (mm) (mm)
at which the velocity of the airstream has 5000 100
150
retarded to 0.4m/s.
PIVOT

4000
LINE

For grilles situated 0.3m or more below ceiling

3000 Throw (m) Velocity Static Pressure
level reduce throw by 1/3. dBA is based on a (Vt = 0.4 m/s)
dBA
(m/s) on Ps (Pa)
grille face
room absorption of 8 dB for sound power ref
2000 200
45˚Deflection

45˚Deflection

45˚Deflection

10-12 W.
0˚Deflection

0˚Deflection
0˚Deflection

0˚Deflection

150

Selection Example 2H/500/150/25T/SF

Air Volume 300 l/s 1000 200
Grille @ 0° deflection 900 50
800
Throw 16m, Velocity 6.1m/s, dBA 31, Ps 10 700 40
20 49
300

Grille @ 45° deflection 600 30 45 49

45 10
20
Throw 8.5m, Velocity 6.1m/s, dBA 37, Ps 32 500 37 8
10
50
20 10 37 6 30
Grille with damper @ 0° deflection 400 9 29 5
5 20 400 300
8 29 4
Throw 16m, Velocity 6.1m/s, dBA 35, Ps 16 7
3
10
300 6
Grille with damper @ 45° deflection 10
9 5
2 1
5
8 3
Throw 8.5m, Velocity 6.1m/s, dBA 41, Ps 51 7 4 2 500
400
200 6 1
3
5 1

Order Example 4
2
Pivot
Line
600
500
3
1H/300/300/PPM9010/R25/SF/OBSS 700
100
90 600
80 Terminal Velocity Correction Factors
Type 800
70
Nominal Width 60 V t (m/s) 0.6 0.5 0.4 0.3 700

Nominal Height 50 1000 800

Throw
Finish 0.65 0.8 1.0 1.3
multiplier
Border 1200
1000
Fixing
25
Options
1200
 Grilles
5
Lever-operated Adjustable Blade Grilles
1HM / 1VM / 2HM / 2VM
Introduction
The Waterloo Series M grille range features a linked multi-blade damper (open/closed
position) which doubles as a set of adjustable blades (for directional air control). These
grilles are typically used for domestic projects but have wider commercial applications
where practical on/off air control or spot cooling/heating are necessary.
The damper and directional blades may be visible or they can be incorporated behind a
set of fixed or adjustable blades.
Product Description
1HM One set of horizontal linked multi-shutter damper blades
1VM One set of vertical linked multi-shutter damper blades
2HM Front individually adjustable horizontal blades plus rear multi-shutter damper
2VM Front individually adjustable vertical blades plus rear multi-shutter damper
Others Cores from series 3 and Airline range with rear multi-shutter damper (see full
Specification on pages 16 and 18)
Features Overall = nominal width + 31
• Manually operable face lever
• Fully open to closed damper facility
• Wide variety core/blade styles available

Overall = nominal
• Multi-blade directional control of air

height + 31
• High quality aluminium construction
Finishes
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
PPM9010 (RAL 9010 Matt - 20% Gloss White)
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Other colours available on request
1HM 2HM
Selection
Use series 1 & 2 or Airline selection nomograms
plus damper correction
Sizes
Units are available in the following standard sizes
(width x height)
1HM, 2VM All others
200 x 200 200 x 200
300 x 200 300 x 200
500 x 200 300 x 300
300 x 300 300 x 500 1VM 2VM
500 x 300
1HM 1VM 2VM 2HM 3HG/M 3HJ/M 3HF/M

35
Fully
Open

38 58
Open Open

ALN/M ALM/M ALG10/M ALJ10/M ALG/M ALJ/M ALF/M

Fixing Borders
13 32
Order Example
2HM/300/200/SF/PPM9010
29
25

25
29

Type
Length
Width
Fixing (Screw Fix as standard) 5 5
Finish
Screw fix (SF) only Type 1HM, 1VM All other types
 Grilles
6
Heavy Duty Adjustable Blade Grilles
1KH / 1KV / 2KH / 2KV 85 128
Introduction 5 Blades
open
The Waterloo Series K adjustable, single and double deflection,

l/S Stack size = Nominal 38

12.7
grilles have been designed for industrial and heavy commercial

Nominal duct &

applications and may be used for supply and exhaust systems.

duct size - 20

grille size
The vanes are screw fixed through nylon bearings to eliminate
vane rattle - even at very high supply velocities; the vanes can
also be tightened on site to suit individual applications. Grille
vanes are individually adjustable to allow jet spread or deflection
to be set within 45° of the duct axis. Optional Opposed
Product Description Blade Damper

1KH Heavy duty single set of horizontal blades 1KH 1KV

1KV Heavy duty single set of vertical blades Overall width = Nominal + 57
2KH Heavy duty double set of blades with front set horizontal
2KV Heavy duty double set of blades with front set vertical

Nominal duct &

OBSS Allen key operated opposed blade damper

Overall height =
grille size

Nominal + 57
SF Screw fixing
Features
• Aluminium alloy extrusions with welded mitred frames
• Heavy duty frames and vanes for robust construction
• Single or double deflection for optimum air pattern adjustment
• Vibration free vane fixing to maintain setting and eliminate
blade rattle 2KH 2KV
• Adjustable blade tension to suit low/high velocity applications Terminal velocity correction factors
Finishes
PPG9010 (RAL 9010 Gloss - 80% Gloss White) Vt (m/s) 1.0 0.8 0.5 0.4 0.3
PPM9010 (RAL 9010 Matt - 20% Gloss White) Throw multiplier 0.5 0.6 1.0 1.3 1.7
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Spectrum correction factors
Other colours available on request
Weights Frequency(Hz) 125 250 500 1k 2k 4k
Series 1K 11 kg/m2 face area 0° Blades +10 +11 +11 +9 +8 0
Series 2K 17 kg/m2 face area
OBSS/ED 9.5 kg/m2 face area 45° Blades +17 +17 +16 +14 +12 0
Sizes Correction factors for grilles with an open damper
Minimum Size - 200 x 200
Maximum Size - 1200 x 1200 Smallest grille size 200+ 250+ 300+ 600+ 1000+
Standard increments 50/100 mm dBA addition 9 8 7 4 3
Fixing Ps multiplier 2.0 1.9 1.8 1.5 1.2
Screw through flange only with a 38 mm border.
Selection Criteria
Smallest Grille Dimension

1200
Data presented below is based on isothermal supply air
conditions with 0° spread. Data may be corrected for other 1000

applications. 800
dBA is based on a room absorption of 8 dB for sound power
ref 10-12 w. 600
Ps is static pressure loss (Pa).
400
Throw is the forward distance travelled by the jet to where the
velocity has retarded to 0.5m/s. 200
∆t 20˚C 10˚C 5˚C 2˚C
Data is based on free jet application. If grille is located within Heating
400mm of the ceiling throw is increased by 50%. For exhaust 0
0.2 0.4 0.6 0.8 1.0 1.2 1.4
applications multiply Performance Nomogram Throw Correction Factor
Ps x 1.5 and add 3 dB to dBA.
AIR FLOW NOMINAL NOMINAL
Selection Example 2KH/300/300/SF RATE WIDTH HEIGHT
Air Volume 250 l/s (l/s) (mm) (mm)
• Grille @ 0° deflection 5000
Throw (m) dBA Static Pressure
PIVOT

Throw 8.8 m dBA 24 Ps 13 Pa 200

LINE

4000 (Vt = 0.5 m/s) Level Ps (Pa)

Vertical projection heating 3000
45˚Deflection

45˚Deflection

45˚Deflection
0˚Deflection

0˚Deflection

0˚Deflection

Using the graph determine the throw correction

factor to be applied to the tabulated data, based 2000 200
on the smallest nominal grille dimension and the
300
heating differential. 50
For example: 600 x 300 grille 40
20
Discharging at a 2°C heating differential results in 1000
900 30
50
a correction factor of 1.1. 800
45 50 400 300
700 20
When applied to the nomogram the maximum 600
10
9 35
45 50
20 40
35 30
downward projection is established. 500
8
7 25 10 20
6 25 500
10 5 10 400
400 9 5
8 5
7 4 4
3 600
Order Example 300 6
5
3 1 2 500
1
4 700
2
2KH/600/200/SF/PPM9010/OBSS 200 3 Pivot 600
Line 800
Type 700
Length
100 1000 800
Width 90
80
Fixing(Screw Fix as standard)
70 1200
Finish 60
1000

Options 50
1200
 Grilles
7
Adjustable Duct Grilles
1RV / 2RV

30
30
Introduction
The Waterloo 1RV & 2RV are designed to fit directly onto the
side of an exposed circular duct without the need for a stub

Nom. - 25
Nom. - 25
duct or transition piece. The flange is supplied complete

Nom.
Nom.

A
A
with a foam sealing gasket on all 4 sides. These units can be
provided with either a single row of vertical blades, or a set
of vertical blades at the front and a set of horizontal blades
at the rear. There are a range of sizes for each grille to suit ØD ØD
ducts from Ø125 - Ø1500. Each grille can be supplied with Eº Eº
an aluminium opposed blade damper if required. F F

Product Description 1RV 2RV

1RV Single vertical set of blades
2RV One set vertical, one set of horizontal blades
OBSS Allen key operated opposed blade damper Sizes Dimensions and Angles
DT-2MG Adjustable duct turns W H ØD min ØD max Eº A F
Features
• Supply and exhaust applications for warm or cooled air 225-1225 75 125 150 45 53 55
• Adjustable blades 225-1225 75 151 200 35 53 55
• Suitable for large range of duct sizes
Finishes 225-1225 75 201 300 30 53 55
PPG9010 (RAL 9010 Gloss - 80% Gloss White) 225-1225 75 301 400 25 53 55
PPM9010 (RAL 9010 Matt - 20% Gloss White)
PPM9006 (RAL 9006 Matt - 30% Gloss Silver) 225-1225 125 200 300 35 66 69
Other colours available on request
225-1225 125 301 400 30 80 63
Weights
1RV 8.5 kg/m2 face area 225-1225 125 401 550 25 80 61
2RV 12.0 kg/m2 face area
OBSS 9.5 kg/m2 face area 225-1225 125 551 900 15 80 59
DT-2MG 9.0 kg/m2 face area
225-1225 175 450 550 25 101 68
Sizes
Nom. W 225mm - 1225mm in 100 mm increments 225-1225 175 551 900 20 101 65
Nom. H 75mm - 225mm in 50 mm increments
Fixing 225-1225 175 901 1250 12.5 101 61
SF Only - Screw through face flange 225-1225 225 500 600 30 135 76
Advantages
• Large size range 225-1225 225 601 900 25 135 72
• High air handling capacity 225-1225 225 901 1500 15 135 65
• Fully adjustable throws
• No need for transition piece on ducts
Jet Terminal Velocity Correction Factors
0.6 m/s x 0.65 0.5 m/s x 0.80 0.4 m/s x 1.0 0.3 m/s x 1.3

Selection Criteria Performance Nomogram

Temperature Differential -11K NOMINAL NOMINAL
THROW (m)
Noise level is based on grilles sound power Vt = 0.4 m/s WIDTH HEIGHT
level less 8dB room absorption. TOTAL AIR FLOW (mm) (mm)
RATE (l/s)
Throw is based on a free jet application
0º 45º 325
Selection Example VELOCITY (m/s)
1RV/625/125 at 0° spread on grille face
1000 STATIC
Air Volume 400 l/s
900 50 PRESSURE
Throw 14 m 0º
75
800 dBA LOSS Ps (Pa)
Pressure Drop 15 Pa 40
20
Noise Level 35 dBA 700 425
30 0º 45º 0º 45º
Face Velocity 7.5 m/s 600

500 53
20
10
45
49
Please refer to page 30 for full details of: 9
10 525
400 8 45
Control Options (OBSS / DT-2MG) 7 37 8
20
50
40 125
6 10
37 6 30
300 10 29
Free Area 9 5 5 20 625
8 5
29 4
1RV 2RV 7
4
10
6 3
74% 66% 3 5
200 725
5 4
2 1 3
175
4 2
2
825
Order Example 3 1
1
PIVOT
1RV/250/325/75/PPM9010/SF/OBSS LINE
925
225
Type 100

Duct Diameter 90 1025

Duct Opening Width 80

Duct Opening Height 70 1125 PIVOT

Finish LINE
60
Fixing 1225

Option 50
 Grilles
8
Reversible Core Grilles
(R)RTC / 2(R)RTC
Introduction
Waterloo's reversible core grilles have been designed for
commercial projects requiring aesthetically attractive
grilles but with a superior performance. The specially
designed close pitch vanes produce high levels of
induction and mixing with ambient air resulting in more
even air diffusion in the occupied zone.
The core is removable and may be rotated or reversed
to provide either 5° or 15° deflection upwards or
downwards; in addition the core can easily be cleaned
before replacing in the frame. Alternatively any of the
Exhaust grille's or Airline Linear grille's cores may be
specified.
Product Description 5° 5°
6 12
RTC Reversible core grille
2RTC Reversible core grille with rear vertical blades
RRTC Same as RTC grille with frame suitable for

22

22
round ducts
2RRTC Same as 2RTC grille with frame suitable for
round ducts 4 4
RTC(C) Reversible core only (no frame) 15° 15°
OBSS Allen key operated opposed blade damper Nom. Nom.
DT-2MG Adjustable Air Turn (fixed on grille)
RTC(C)-6 RTC(C)-12
DT-2M Adjustable Air Turn (fixed in duct)
Features
• Turbulator vanes provide high induction and mixing

30
with room air
• Core removable for access and cleaning
• One core provides 5° or 15° deflection, up or down
• Rear set of vanes available as an option for horizontal

Nom. - 25
spread/deflection control
• Available in 6mm or 12mm blade pitch

Nom.
Nom. - 6

A
Finishes Nom.
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
PPM9010 (RAL 9010 Matt - 20% Gloss White)
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Other colours or anodised finish available on request
(Anodised finish unavailable on (2)RRTC) ØD
Weights Eº
R(R)TC 14 kg/m face area
2
F
2R(R)TC 18.0 kg/m2 face area
OBSS/ED 9.5 kg/m2 face area 2RTC-6 2RRTC-6
DT2M(G) 9.0 kg/m2 face area For sizes E and F see 1RV/2RV
Sizes
Minimum Size - 100 x 100 mm
Maximum Size - 1500 x 450mm
Border Types
5 16
5

Free Area
16
30

35

RTC-6 RTC-12
48.5

2RTC-6 2RTC-12
RRTC-6 RRTC-12
54

2RRTC-6 2RRTC-12
24.5

RTCC-6 RTCC-12

74% 66% 87% 79%

R5 R16 R16-24

Fixings

• STS • RCCF • SF only for (2)RRTC • BSSBD • BSSBP

Order Example
RTC-6/500/250/PPM9010/R16/RCCF/OBSS

Type
Nominal Width
Nominal Height
R16 + STS R5 + STS R16-24 + STS R16 + RCCF
Finish
Border
Fixing
Options
 Grilles
9
Reversible Core Grilles
(R)RTC / 2(R)RTC

Selection Example Note!

RTC-6/425/125 Maximum Throws in the following tables are for an air terminal
Spread 0° velocity of 0.15m/s within the comfort zone.
Air Volume 83 l/s RTC is at 0° spread.
Throw 4.7 m
Pressure Drop 5 Pa 2RTC spread at 0° and 30° using rear blades.
Noise Level 18 dBA

Performance Table
RTC-6 Supply
2RTC-6 325x125 425x125 525x125 625x125 425x225 525x225 625x225 825x225 625x325 825x325

m /h
3
l/s 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30°
T 2.9 2.3
100 28 Ps 1 2
Lw - -
T 3.4 2.6 3.1 2.1
150 42 Ps 2 3 1 2
Lw - - - -
T 4.5 3.4 3.9 2.9 3.5 2.7 3.2 2.4
200 56 Ps 4 6 2 3 1 3 1 2
Lw - - - - - - - -
T 5.5 4.3 4.7 3.6 4.2 3.2 3.8 3.0 3.5 2.8
300 83 Ps 10 15 5 8 3 4 2 3 1 2
Lw 24 29 18 22 - - - - - -
T 8.2 6.9 7.3 5.7 6.3 5.0 5.6 4.3 5.0 4.1 4.6 3.6
400 111 Ps 17 25 10 15 5 8 4 6 2 4 1 2
Lw 30 36 25 30 20 25 17 21 - - - -
T 8.2 6.7 7.4 6.1 6.8 5.5 6.3 5.0 5.5 4.3 4.8 3.8
500 139 Ps 16 25 10 14 7 10 3 6 2 3 1 2
Lw 30 35 26 30 22 27 - 21 - - - -
T 9.4 7.8 8.6 6.8 7.4 5.8 6.4 5.4 5.9 4.8 5.5 4.5
600 167 Ps 15 23 11 19 6 8 3 5 2 3 1 2
Lw 31 36 27 32 20 25 - 19 - - - -
T 11.1 9.1 9.8 7.6 8.2 6.6 7.5 6.0 6.7 5.3 6.0 5.0
750 208 Ps 18 26 8 13 5 8 3 5 2 3 1 2
Lw 33 38 26 30 22 27 18 22 - - - -
T 13.4 10.6 11.3 9.2 10.1 8.0 8.9 7.1 7.9 6.3 6.7 5.3
1000 278 Ps 16 25 10 15 7 10 3 5 2 3 1 2
Lw 33 38 28 33 24 29 17 22 - 19 - -
T 14.8 12.0 12.9 10.2 11.3 9.4 10.5 8.1 8.9 7.3
1250 347 Ps 16 24 10 15 4 7 3 5 2 3
Lw 34 39 29 34 23 27 20 25 - -
T 17.0 13.5 14.4 12.0 13.0 10.4 11.4 9.1
1500 417 Ps 17 25 9 12 6 10 4 6
Lw 35 40 28 33 26 31 18 24
T 18.0 15.1 17.1 13.4 14.5 11.7
2000 556 Ps 16 24 11 16 6 10
Lw 36 40 33 38 27 32
T 20.5 16.9 17.4 14.1
2500 694 Ps 14 22 10 15
Lw 40 45 33 37
T 20.5 16.8
3000 833 Ps 16 25
Lw 39 44
 Grilles
10
Reversible Core Grilles
(R)RTC / 2(R)RTC
Performance Table Nom. H =75 mm Suitable for round ducts Ø 150 up to Ø 400 Selection Example
RRTC-6 Supply / Exhaust
2RRTC-6/825/75
2RRTC-6
Spread 0°
325 X 75 425 X 75 525 X 75 625 X 75 825 X 75 1025 X 75 1225 X 75
Air Volume 83 l/s
m3/h l/s 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30°
Throw 4.7 m
T 3.6 2.8 3.4 2.7 3.2 2.5 2.9 2.3
Pressure Drop 5 Pa
100 28 Ps 4 6 2 3 1 3 1 2
Noise Level 18 dBA
Lw - - - - - - - -

T 4.1 3.3 3.9 3.1 3.7 2.9 3.4 2.6 3.1 2.1
150 42 Ps 11 16 6 9 3 5 2 3 1 2 Ceiling Height Throw
Lw 24 29 16 19 - - - - - -
Correction Factors

T 6.0 4.7 5.3 4.2 4.9 3.9 4.5 3.4 3.9 2.9 3.5 2.7 3.2 2.4 Ceiling 2.5 2.7 3.0 3.5
200 56 Ps 19 27 11 16 7 10 4 6 2 3 1 3 1 2 Height
Lw 31 37 24 29 18 21 - - - - - - - - (m)
T 6.5 5.1 5.9 4.6 5.5 4.3 4.7 3.6 4.2 3.2 3.8 3.0
Maximum 2.5 3.3 4.5 6.3
300 83 Ps 24 32 15 21 10 15 5 8 3 4 2 3
Throw
Lw 37 43 28 34 24 29 18 22 - - - -
(m)
T 8.2 6.9 7.3 5.7 6.3 5.0 5.6 4.3
400 111 Ps 17 25 10 15 5 8 4 6
Lw 30 36 25 30 20 25 17 21
T 8.2 6.7 7.4 6.1 6.8 5.5
500 139 Ps 16 25 10 14 7 10
Lw 30 35 26 31 22 27
T 9.4 7.8 8.6 6.8
600 167 Ps 15 23 11 19
Lw 31 36 27 32
T 11.1 9.1
750 208 Ps 18 26
Lw 33 38

Performance Table Nom. H =125 mm Suitable for round ducts Ø 300 up to Ø 900 Selection Example
RTC-6 Supply / Exhaust
2RRTC-6/425/125
2RTC-6
Spread 0°
325 X 125 425 X 125 525 X 125 625 X 125 825 X 125 1025 X 125 1225 X 125
Air Volume 83 l/s
m3/h l/s 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° Throw 4.7 m
T 2.9 2.3 Pressure Drop 5 Pa
100 28 Ps 1 2 Noise Level 18 dBA
Lw - -

T 3.4 2.6 3.1 2.1

Ceiling Height Throw
150 42 Ps 2 3 1 2
Correction Factors
Lw - - - -

T 4.5 3.4 3.9 2.9 3.5 2.7 3.2 2.4 Ceiling 2.5 2.7 3.0 3.5
Height
200 56 Ps 4 6 2 3 1 3 1 2
(m)
Lw - - - - - - - -

T 5.5 4.3 4.7 3.6 4.2 3.2 3.8 3.0 3.5 2.8 Maximum 2.5 3.3 4.5 6.3
300 83 Ps 10 15 5 8 3 4 2 3 1 2 Throw
(m)
Lw 24 29 18 22 - - - - - -

T 8.2 6.9 7.3 5.7 6.3 5.0 5.6 4.3 5.0 4.1 4.6 3.6

400 111 Ps 17 25 10 15 5 8 4 6 2 4 1 2
Lw 30 31 25 30 20 25 17 21 - - - -

T 8.2 6.7 7.4 6.1 6.8 5.5 6.3 5.0 5.5 4.3 4.8 3.8

500 139 Ps 16 25 10 14 7 10 3 6 2 3 1 2
Lw 30 35 26 30 22 27 - 16 - - - -

T 9.4 7.8 8.6 6.8 7.4 5.8 6.4 5.4 5.9 4.8

600 167 Ps 15 23 11 19 6 8 3 5 2 3
Lw 31 36 27 32 20 25 - 19 - -

T 11.1 9.1 9.8 7.6 8.2 6.6 7.5 6.0

750 208 Ps 18 26 8 13 5 8 3 5
Lw 33 38 26 30 22 27 18 22
T 13.4 10.6 11.3 9.2 10.1 8.0

1000 278 Ps 16 25 10 15 7 10
Lw 33 38 28 33 24 29
T 14.8 12.0 12.9 10.2

1250 347 Ps 16 24 10 15
Lw 34 39 29 34
T 17.0 13.5

1500 417 Ps 17 25
Lw 35 40
 Grilles
11
Reversible Core Grilles
(R)RTC / 2(R)RTC
Performance Table Nom. H =175 mm Suitable for round ducts Ø 450 up to Ø 1250 (Supply / Exhaust) Selection Example
RRTC-6 / 2RRTC-6 325 X 175 425 X 175 525 X 175 625 X 175 825 X 175 1025 X 175 1225 X 175 2RRTC-6/425/175
m3/h l/s 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30°
Spread 0°
T 3.5 2.7 3.1 2.3
Air Volume 111 l/s
Throw 5.6 m
200 56 Ps 1 3 1 2
Lw - - - -
Pressure Drop 4 Pa
T 4.5 3.3 3.8 3.0 3.5 2.7
Noise Level 17 dBA
300 83 Ps 3 5 1 3 1 2
Lw - - - - - -

T 6.1 5.0 5.6 4.4 5.1 4.1 4.9 3.8 Ceiling Height Throw
400 111 Ps 8 12 4 6 2 3 1 2 Correction Factors
Lw 22 26 17 21 - - - -
Ceiling 2.5 2.7 3.0 3.5
T 7.8 6.1 6.8 5.5 6.3 5.1 5.8 4.5 4.8 3.8 Height
500 139 Ps 13 20 7 10 4 6 2 4 1 2 (m)
Lw 27 32 22 27 19 21 - 18 - -

T 9.9 7.9 8.6 6.8 7.7 6.2 7.1 5.4 5.9 4.8 5.2 4.0 Maximum 2.5 3.3 4.5 6.3
600 167 Ps 21 34 11 19 7 9 4 7 2 3 1 2 Throw
Lw 37 41 27 35 22 26 18 23 - - - -
(m)
T 11.1 9.2 10.1 8.2 9.1 7.0 7.5 6.0 6.6 5.4 6.0 5.0
750 208 Ps 18 26 10 15 7 11 3 5 2 3 1 2
Lw 33 38 28 32 24 29 18 22 - - - -

T 14.1 11.5 12.6 9.7 10.1 8.0 8.9 7.1 7.9 6.3
1000 278 Ps 19 29 13 19 7 10 3 5 2 3
Lw 36 41 30 35 24 29 19 23 - 19
T 16.1 12.5 12.9 10.2 11.3 9.3 10.5 8.1
1250 347 Ps 23 35 10 15 6 9 3 5
Lw 38 43 29 34 25 29 20 25
T 17.0 13.5 14.7 11.9 13.0 10.4
1500 417 Ps 17 25 11 15 6 10
Lw 35 40 30 34 26 31
T 19.6 16.1 17.1 13.4
2000 556 Ps 18 27 11 16
Lw 35 42 33 38
T 20.5 16.9
2500 694 Ps 14 22
Lw 40 45

Performance Table Nom. H = 225 mm Suitable for round ducts Ø 600 up to Ø 1500 (Supply / Exhaust) Selection Example
RRTC-6 / 2RRTC-6 325 X 225 425 X 225 525 X 225 625 X 225 825 X 225 1025 X 225 1225 X 225 2RRTC-6/425/225
l/s 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30° 0° 30°
Spread 30°
m3/h
Air Volume 139 l/s
T 3.1 2.3
Throw 5.0 m
200 56 Ps 1 2
Pressure Drop 6 Pa
Lw - -
Noise Level 21 dBA
T 3.8 3.0 3.5 2.8
300 83 Ps 2 3 1 2
Lw - - - -
Ceiling Height Throw
T 5.6 4.4 5.0 4.1 4.6 3.6
Correction Factors
400 111 Ps 4 6 2 4 1 2
Lw 17 21 - - - - Ceiling 2.5 2.7 3.0 3.5
T 6.8 5.5 6.3 5.0 5.5 4.3 4.8 3.8
Height
(m)
500 139 Ps 7 10 3 6 2 3 1 2
Lw 22 27 - 21 - - - - Maximum 2.5 3.3 4.5 6.3
T 8.6 6.8 7.4 5.8 6.4 5.4 5.9 4.8 5.5 4.5 Throw
600 167 Ps 11 19 6 8 3 5 2 3 1 2 (m)
Lw 27 32 20 25 - 19 - - - -

T 11.1 9.1 9.8 7.6 8.2 6.6 7.5 6.0 6.7 5.3 6.0 4.7
750 208 Ps 18 26 8 13 5 8 3 5 2 3 1 2
Lw 33 38 26 30 22 27 18 22 - - - -

T 13.4 10.6 11.3 9.2 10.1 8.0 8.9 7.1 8.0 5.9 6.7 5.3
1000 278 Ps 16 25 10 15 7 10 3 5 2 3 1 2
Lw 33 38 28 33 24 29 17 22 - - - -

T 14.8 12.0 12.9 10.2 11.3 9.4 10.1 8.1 8.9 7.3
1250 347 Ps 16 24 10 15 4 7 3 5 2 3
Lw 34 39 29 34 23 27 16 22 - -

T 17.0 13.5 14.4 12.0 12.9 10.5 11.4 9.1

1500 417 Ps 17 25 9 12 5 8 4 6
Lw 35 40 28 33 23 28 18 24
T 18.0 15.1 16.3 13.4 14.5 11.7
2000 556 Ps 16 24 10 16 6 10
Lw 36 40 30 35 27 32
T 19.4 16.1 17.4 14.1
2500 694 Ps 16 24 10 15
Lw 36 41 33 37
T 20.5 16.8
3000 833 Ps 16 25
Lw 39 44
 Grilles
12
Exhaust Grilles
3HG / 3HJ / 3HF / GC5 / PER
Introduction
The Waterloo 3 Series vane grilles, GC5 eggcrate and PER mesh grilles have been designed
to satisfy all exhaust applications in H & V systems.
The various cores may be selected to satisfy both engineering and architectural
requirements. Cores are constructed from aluminium extrusions supported on integral
aluminium tubes; mesh cores are perforated aluminium sheet.
The frames are constructed from aluminium extrusions which are mitred and welded or
cleated.
Product Description
3HG 0° fixed blade grille
3HJ 15° fixed blade grille
3HF 45° fixed blade grille 5 27 5 27 5 27 5 27 5 27 Filter 5 27 5 27
GC5 12.5 x 12.5 x 12.5 eggcrate retaining 12
clip
grille
RCG-GC5 Removable core grille (GC5)
(C) Core only

Overall Flange. Nom +25

12
Filter
PER Perforated plate grille
RB Reverse border

Nom. - 25
Nom. - 25
Nom. - 25

Nom. - 25

Nom. - 25

Nom. - 25

Nom. - 25
OBSS Allen key operated opposed

Nom.
Nom.
Nom.
Nom.

Nom.

Nom.

Nom.

Nom.
blade damper. If used with
RCG, OBSS is mounted in
duct or plenum.
20

20

ED Equalising deflector
20

Weights
Series 3 7 kg/m2 face area
GC5 5 kg/m2 face area
RCG-GC5 6.5 kg/m2 face area
OBSS/ED 9.5 kg/m2 face area PER PER with GC5 RCG-GC5 GC5(C)
PER 6.0 kg/m2 face area 3HG 3HJ 3HF
Filter clip Removable
Finishes core grille
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
PPM9010 (RAL 9010 Matt - 20% Gloss White) Please refer to pages 29 - 31
PPM9006 (RAL 9006 Matt - 30% Gloss Silver) Free Area for full details of:
Other colours or anodised finish available 3HG 3HJ 3HF GC5 RCG/GC5 PER Fixing Options
Control Options
on request Sub Frames
84% 84% 54% 91% 83% 51%
GC5/(C) Core is mill finished as standard Sizing Implications
Border Options
dBA (Lp) and Static Pressure (Ps) Correction Factors for Grilles with an Open Damper
Grille Width 100+ 125+ 150+ 200+ 250+ 300+ 350+ 450+ 550+ 600+ 700+ 850+ >1000

Lw Addition (CL) 12 11 10 9 8 7 6 5 5 4 4 4 3

Ps Multiplier (CP) 2.5 2.4 2.2 2.0 1.9 1.8 1.7 1.6 1.5 1.5 1.4 1.3 1.2

Sizes Performance Nomogram

Minimum Size - 100 x 100 NOMINAL
AIR FLOW NOMINAL
Maximum Size - 2000 x 1500 RATE WIDTH
HEIGHT
(mm)
(Maximum GC5 any x 2000) (l/s) (mm) 100
Maximum RCG-GC5 600 x 600
PIVOT
LINE

200
Fixing Options 5000
SF CF CRB VS AFVS
4000
PFVS RCHS AFHS AFCF RCCF Velocity (m/s)
BSSBD BSSBP RCG-GC5 3000 25mm from
250
grille face
Selection Example 2000 dBA Pressure Loss
150

500/400 Grille Handling 600 l/s Level Ps (Pa)

• 3HJ grille 300
3HG PER 3HF 3HF PER 3HG
Noise level = 32 dBA Ps = 11 Pa 3HJ GC5 3HJ
200
RCG/GC5 GC5
• PER grille 1000 RCG/GC5
900
Noise level = 35 dBA Ps = 20 Pa 800
53 10
100
53
• 3HJ with open damper 700 45 100
50 400 250
53
Noise level = 37 dBA Ps = 17 Pa 600
37
45 5
4
100 50

• PER with open damper 500 37 45

3 50 300
29 10
Noise level = 40 dBA Ps = 31 Pa 400 29 37 2 10 500
5
300 29 10 5
Pivot 2
400
Line 1 5
2
600

200
Order Example 2
700
500
Pivot
3HG/300/300/PPM9010/R25/SF/OBSS Line 800
600
100
Type 900

Nominal Width
1000
Nominal Height
Finish 50
Border 1200

Fixing 1000

Options
25 1500 1200
 Grilles
13
Security Grilles
SG1 / SG2 / SG3
Introduction
The Waterloo SG series security grilles have been designed in conjunction with the
prison service for supply and extract of air in places where security is a priority - from
prison institutions, courts and police stations to young offenders institutions and secure
buildings.
Manufactured from 3mm thick mild steel plate, SG series grilles are available in three
versions - SG1, SG2 and SG3 - able to meet ventilation needs in high, medium or low
security applications. The series offers rectangular or square size options from 100mm
up to 600mm.
Product Description
SG1 High Security Grille With Rear Fixing
K
SG2 Medium Security Grille With Face and Rear Fixing Wall thickness
SG3 Low Security Grille With Face Fixing Nom.W + 100

OBSS Allen Key Operated Opposed Blade Damper

PB Plenum Box

Nom.H + 100

Nom. + 156
Features

Nom. + 82

Nom. + 8
Nom.H
• Low, Medium or High Security Applications SG1 + OBSS
• Side or Top Entry Connections Available
• 3mm Perforated Face-plate
Sizes Nom.W
Minimum size - 75 x 75
Maximum size - 1000 x 600 K + 80

Fixing K
Nom.W + 100
Security fixings by others 15 Wall thickness
Finishes

15
Zintec coating as standard.

Nom. H + 100
PPG9010 (RAL 9010 Gloss - 80% Gloss White)

Nom. + 156
Nom. + 16

Nom. + 8
SG2 + OBSS

Nom.H
PPM9010 (RAL 9010 Matt - 20% Gloss White)
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Other colours available on request
Weights
SG1 - SG2 for the approximated weight use the formula below: 7 Nom.W
((W+100)(H+100) + 250(W+H+100) + 2(W+H)(K+80) - 0.35WH) 2.4 x 10ˉ⁵ Kg K + 80

SG3 for the approximated weight use the formula below: Nom.W + 50 90
((W+50)(H+50) + 100(W+H) - 0.35WH)) 2.4 x 10ˉ⁵ Kg 12.5

Specification of Perforations in Front Face

Perforations are 3mm diameter at a 5mm pitch
Nom.H + 50
12.5

Nom. + 12
Please note that security grilles with face fix are Nom.H
not supplied with screws. SG3 + OBSS

Nom.W
7

50
Selection Criteria Performance Nomogram
Throw data is based on a free jet under isothermal
NOMINAL GRILLE SIZE
conditions and is presented for a terminal velocity of AIR FLOW
RATE l/s WIDTH HEIGHT
0.5m/s. (mm) (mm)
Jet throws to a terminal velocity of 0.25m/s can be 100
obtained by applying a factor of 1.5.
Pivot
Line

DUCT AIR
Noise data is presented in terms of sound power VELOCITY
based dBA levels and is valid for supply and exhaust 800
(m/s)
700
applications 0.005
600 Jet throw
Selection Example SG1/300/300 for an Exhaust (m)
STATIC 100
0.006
PRESSURE
application 500
450 LOSS (Pa)
150
Pivot

Air flow rate 200 l/s

Line
Vt=0.5m/s

400 0.008
EXHAUST

Jet throw 4.8 m 350

SUPPLY

NOISE 0.01
Pressure loss 18 Pa 300
200
LEVEL
Noise level <25 dBA 250
dBA 150

200 10 55 0.015
8.0 70
45 4.0 50 250
6.0 70
150 35 50 30 0.02
5.0
200
Free Area 4.0 25
2.0
30 20
20 10 300
3.0
35% 100 10 5 0.03
90 2.0 1.0 250
80 5
Please refer to pages 33 - 35 for full details of: 70 0.04
400
Plenum box 60
1.0 0.5
300 0.05
50
Order Example 45
40
0.5
500
35
SG1/300/300/150/PPM9006/OBSS 400
0.08
30
0.1 600
Type 25

Nominal Width 20 500

Nominal Height 0.15
Depth (k) 15 Free
600
Finish Area
Control (m2)
10
 Grilles
14
Airline Linear Grilles
ALN / ALM / ALF / ALG / ALJ
Introduction
Waterloo Airline Linear grilles have been designed to
satisfy air diffusion and engineering requirements as well
as architectural specifications. Airline grilles may be used
in modular or continuous (ALN, ALM) situations for ceiling,
sidewall, cill or bulkhead applications. The range is available
with a wide variety of special options and fabrications to
suit most project requirements. Grilles may be supplied
with or without frames and borders - cores are represented
with a suffix “(C)”. 5 27 27 5 5 43 5 27
Product Description
ALN 0° 6mm thick blade, 12.5mm pitch 19
ALM 15° 6mm thick blade, 12.5mm pitch Special
ALF 45° 4.5mm thick blade, 12.5mm pitch 2 way
cores are
ALG 0° 3mm thick blade, 12.5mm pitch
available

12.5

12.5
ALJ 15° 3mm thick blade, 12.5mm pitch

12.5

12.5

12.5
for all

Nom. - 25

Nom. - 25
Nom. - 25
Nom. - 3
ALG10 0° 3mm thick blade, 10mm pitch

Nom.

Nom.
angled

Nom.
ALJ10 15° 3mm thick blade, 10mm pitch blade,
ALG(2) As above with a rear set of adjustable blades i.e.
ALJ(2) As above with a rear set of adjustable blades 2ALF as
ALN(2) As above with a rear set of adjustable blades shown.
ALM(2) As above with a rear set of adjustable blades
2ALF 2 way cores are available on angled blade
designs (Suffix M, F or J) ALF ALF-RB ALF(C) ALF(2) 2ALF
AFG 3mm border frame (any blade can be specified)
OBSS Allen Key operated opposed blade damper 5 27 5 27 5 27 5 27
ED Equalising deflector
DT-2M Adjustable duct turn (Installed in duct)
ALF-RB Reverse Border (Any blade can be specified)
Finishes
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
12.5

12.5

12.5
12.5

Nom. - 25

Nom. - 25

Nom. - 25
Nom. - 25

PPM9010 (RAL 9010 Matt - 20% Gloss White)

Nom.

PPM9006 (RAL 9006 Matt - 30% Gloss Silver)

Other colours or anodised finish available on request
Weights
ALG 14 kg/m2 face area
Others 10 kg/m2 face area
OBSS/ED 9.5 kg/m2 face area
DT2M(G) 9.0 kg/m2 face area
Sizes ALG ALM ALN ALJ
Minimum size - 150 x 50mm
Maximum sizes for ALG / ALJ / ALF - 2000 x 1500mm 5 43 5 43 5 43 5 43
Maximum sizes for ALN / ALM - any x 1500mm
Maximum single section of cores - 2000 x 1500mm
Refer to head office for borders up to 4 meters in one piece
Continuous grilles are supplied in sections for butt jointing
on site.
Fixing Options
12.5

12.5

12.5

12.5
Nom. - 25

Nom. - 25

Nom. - 25

Nom. - 25

SF CF CRB VS AFVS
PFVS RCHS AFHS AFCF RCCF
BSSBD BSSBP
The following fixings are not compatible with the ALF blade
CRB RCHS AFHS BSSBD
BSSBP - Not suitable for grilles with a rear blade or ALF blade
BSSBD - recommended for AFG frame if wall mounted
(plasterboard)
ALG(2) ALM(2) ALN(2) ALJ(2)

Free Area
(OBSS open) 5 86
Type 87.5 (Open)
Pitch 19
ALG ALJ ALF ALM ALN
3

10mm 68% 68%

12.5mm 74% 74% 44% 49% 49%
Nom. H + 12

Nom. H - 7

12.5
12.5

Nom. H

Nom. - 25

Order Example
OBSS

ALG/1000/150/PPM9010/R25/SF/OBSS
Type
Nominal Width
3

Nominal Height 35
44.5
Finish
Border Curved ALG Grille AFG frame shown with ALF(2) + OBSS
Fixing ALN blade + OBSS
Options
 Grilles
15
Airline Linear Grilles
ALN / ALM / ALF / ALG / ALJ
Performance Nomogram (Supply)
NOMINAL
Selection Criteria
AIR FLOW KEY
RATE ALN ALM DUCT Performance data is derived from tests carried
THROW
(l/s/m) (m) ALG10 ALJ10 HEIGHT(mm) out at isothermal conditions for a 1.25m long
VELOCITY (m/s) ALG ALJ
grille mounted 0.2m below a ceiling surface.
1500 25mm from
grille face 50 Throw is the horizontal distance to where the
envelope velocity equals 0.5m/s.
40
1000 STATIC PRESSURE
900 LOSS (Pa)
800
30
Selection Example (Supply)
700 dBA
LEVEL
150mm wide grille supplying 400 l/s/m
600 20
13
75 • ALG 10
500 10
8
100 Ps = 16 Pa 32 dBA
45
400 7
10 6
50 • ALG
37 5
300 100 Ps = 15 Pa 31 dBA
4
250 29 • ALG 10/OBSS
3 10
200
5
21
Ps = 24 Pa 35 dBA
2 5
4
pivot line
• ALG/OBSS
150
3 150 Ps = 22.5 Pa 34 dBA

2 throw throw
100
90
200
80
70 300mm
max
60 SILL SIDE WALL Notes
50 For grilles with OBSS opposed blade damper
300 (open), multiply the pressure loss by 1.5 and
add 3dB to the Noise level.
Where AL2 grilles are used multiply Ps x 3.0
Correction Factors and add 6dB to Noise level.
Grille Length Correction Factors Grille selections for sidewall and cill
Length (m) 0.25 0.5 1.25 2 2.5 3 applications should be based on a minimum
discharge velocity of 2m/s.
Lw -6 -3 0 +2 +3 +5
Throw x 0.9 x 0.9 x 1.0 x 1.0 x 1.1 x 1.1 For sidewall grilles that are to be mounted
more than 0.2m from the ceiling, it is
preferable to use a 15° blade format.
Non-isothermal Jet Correction Factors
Differential 10°c cooling 0°c 10°c warming For sidewall grilles mounted 0.3m or more
below ceiling level the throw is reduced by 1/3.
Sidewall throw x 0.9 x 1.0 x 1.1
Cill throw x 0.9 x 1.0 x 1.1

Performance Nomogram (Exhaust)

Terminal Velocity Correction Factors
AIR FLOW
Vt (m/s) 0.6 0.5 0.4 0.3 RATE
(l/s/m)
Throw multiplier x 0.8 x 1.0 x 1.3 x 1.66 1500
VELOCITY (m/s)
1000 25mm from
Selection Example (Exhaust) 900 grille face
100mm wide grille supplying 200 l/s/m 800
700 STATIC PRESSURE
dBA NOMINAL
600 LEVEL LOSS (Pa)
• ALF ALF ALN ALG10 ALG DUCT
500 ALG ALG 10 ALF
ALM ALJ10 ALJ HEIGHT (mm)
Ps = 46 Pa 40 dBA 400
ALJ
ALN
ALJ 10
10 200 200 50
ALM
• ALN 8 200
100
300 53 53 7 100
6 100
Ps = 15 Pa 31 dBA 250 45 53 5 200 50
45 50 50
4
• ALF/OBSS 200 37 45 3
100
75
37
50
Ps = 69 Pa 43 dBA 150 29
29 37 2 10 10
10
5
• ALN/OBSS 21 21 29 5
5 100
1 10
Ps = 23 Pa 34 dBA 100
90
21
5
Pivot line 1
80 1
1
70 0.5 150
60 Pivot line
1
50 200
40

30
300
25

20

15

10
 Grilles
16
Plasterline Linear Grilles
APN / APM / APG / APJ / APF
Introduction
Waterloo Plasterline Linear Grilles have been designed to satisfy
air diffusion and engineering requirements while providing a
narrow plaster-in border to meet architectural specifications.
Plasterline grilles may be used in modular or continuous
situations for ceiling, sidewall, cill or bulkhead applications. The
range is available with a wide variety of special options and
fabrications to suit most project requirements.
Product Description
APN 0° 6mm thick blade, 12.5mm pitch
APN2 ALN with rear set of adjustable blades
APM 15° 6mm thick blade, 12.5mm pitch
APM2 ALM with rear set of adjustable blades
2APM ALM with 2 way core
APG 0° 3mm thick blade, 12.5mm pitch 5 36 5 36 5 36
APG2 ALG with rear set of adjustable blades
APG10 ALG with 10mm pitch blades

26
26

26
APJ 15° 3mm thick blade, 12.5mm pitch
APJ2 ALJ with rear set of adjustable blades
2APJ ALJ with 2 way core
APJ10 ALJ with 10mm pitch blades

Nominal + 15

Nominal + 15

Nominal + 15
12.5
12.5

12.5
APF 45° 5mm thick blade, 12.5mm pitch
Nominal

Nominal

Nominal
2APF ALF with 2 way core
RAB Rear set of adjustable blades
OBSS Allen Key operated opposed blade damper
Finishes
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
PPM9010 (RAL 9010 Matt - 20% Gloss White)
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Other colours or anodised finish available on request
Sizes APN APM APG
Because of their nature, the sizing for Plasterline grilles is
exceptional in that measurements are for the internal opening
at the front face. Opening cut-out in the substrate should be 15
more than the stated grille size. 5 36 5 36 5 36
Minimum size: 150 wide x 75 high
Maximum size: 2000 wide x 500 high
26

26

26
Continuous grilles can be supplied in sections for butt joining on
site. Refer to Head Office for widths up to 3000 in one piece.
Nominal + 15

Nominal + 15

Nominal + 15
12.5

12.5

12.5
Nominal

Nominal

Nominal

Free Area
Type
Pitch
APG APJ APF APM APN
10mm 68% 68% - - -
12.5mm 74% 74% 44% 49% 49%

APJ APF 2APF

Special 2 way
cores are available
for all angled blade
configurations, i.e.
2APF as shown.

Order Example
APG/1000/150/PPM9010/OBSS
Type
Inside Width
Inside Height
Finish
Options
 Grilles
17
Urban Grilles
UC / UF / UE
Introduction
The new Waterloo Urban Grille has been designed with
the industrial design style in mind, allowing for exposed
duct work to now become a feature of the building’s
design.
Product Description
1- Urban Curve
Curved to match the side walls of galvanised steel oval
ducting. Available with different throw angled blades
to suit the installation requirements. For side fitting to
curved face of duct.
UCG 0° 3mm thick blade, 12.5mm pitch
UCJ 15° 3mm thick blade, 12.5mm pitch Urban Curve Urban End
UCN 0° 6mm thick blade, 12.5mm pitch Height Height
UCM 15° 6mm thick blade, 12.5mm pitch
UCF 45° 5mm thick blade, 12.5mm pitch
Radius
UCA Adjustable blade
Options

12.5
• RC Removable core
• 10mm blade pitch available with 3mm blades
• RAB Adjustable blades horizontal or vertical
2- Urban Flat
A flat grille to suit vertical throw when installed on the
underside of galvanised steel ducting.
For flat face of oval duct. Blades parallel with centre-
line of duct.
UFG 0° 3mm thick blade, 12.5mm pitch
UFJ 15° 3mm thick blade, 12.5mm pitch
UFN 0° 6mm thick blade, 12.5mm pitch
UFM 15° 6mm thick blade, 12.5mm pitch
UFF 45° 5mm thick blade, 12.5mm pitch
2UFJ 2 way 15° 3mm thick blade, 12.5mm pitch
2UFF 2 way 45° 5mm thick blade, 12.5mm pitch
2UFM 2 way 45° 6mm thick blade, 12.5mm pitch
Options
• 10mm blade pitch available with 3mm blades Free Area
3- Urban End Type
Designed to fit into the vertical end of galvanised steel
Pitch UCG UCJ UCN UCM UCF
flat oval duct, blades are available in various angles
UFG UFJ UFN UFM UFF
to suit the throw characteristics required from the
UEG UEJ UEN UEM UEF
installation.
UEG 0° 3mm thick blade, 12.5mm pitch 10mm 68% 68% - - -
UEJ 15° 3mm thick blade, 12.5mm pitch 12.5mm 74% 74% 44% 49% 49%
UEN 0° 6mm thick blade, 12.5mm pitch
UEM 15° 6mm thick blade, 12.5mm pitch
Circular flat oval duct sizing
UEF 45° 5mm thick blade, 12.5mm pitch
UCA Adjustable blade Standard
Options ISO R20
Height of duct mm
• HB Horizontal blades duct size
• VB Vertical blades range
• 10mm pitch
76 102 127 152 203 254 305 356 406
Features
• The grilles are left in their natural finish to fit in with 160 320
the industrial look.
180 401
• Urban grilles have three styles available one for
mounting on the side of the duct, one for mounting 200 521 386
at the end of a duct and one for mounting on the 224 467 371
underside of the duct. To ensure that any duct
layout design can be catered for. 250 452 399
• Constructed from 1.6mm galvanised steel. 280 478
Finishes
Width of duct mm

Natural galvanised steel and natural aluminium. 315 638

355 800 610
400 1039 770 582
450 932 742 632
500 1171 902 792
Order Example 560 1143 955 846 737
UCG/160/76/MILL/R25/SF/OBSS
Type 630 1626 1196 1006 897
Width 710 1950 1598 1326 1138
Height
Finish 800 1727 1539
Border 900 1941
Fixing
Options Notes: Urban end grilles are built to suit the standard heights but can be
manufactured to fit any width. Custom dimensions are available on request.
 Grilles
18
Air Transfer Grilles
NS / DV / NSNL
Introduction
Waterloo transfer grilles are suitable for mounting in doors,
partitions and walls to allow ventilation air to pass between
adjacent rooms.
The NS series are small format grilles with a No-Sight feature,
the DV series are large format grilles for door ventilator
applications.
The range is available with a wide variety of frame and fixing
options to suit various design needs.
Product Description
NS Core only grille for beading in place
NSA Framed No-Sight grille with matching reverse frame 20
NSC Framed No-Sight grille without a matching reverse
frame
DV Core only door ventilator for bead fixing

Nom. - 19
Nom. - 2
9.8

Nom. - 25
Nom. - 25
DVA Framed door ventilator with matching reverse frame

Nom.
Nom.

Nom.
DVC Framed door ventilator without a matching reverse
frame
NSNL Core only No-Sight, No-Light grille for beading in NS NSA NSC
place
NSNLA Framed NSNL grille with matching reverse frame
30-50
NSNLC Framed NSNL grille without matching reverse frame
Features 27.5
• Small, large or dark room formats to suit design
requirements

Nom. - 19
Nom. - 25

Nom. - 25
• No-Sight (NS) option for room to room privacy
Nom. - 2
16.3

Nom.
Nom.
• Small, or large formats to suit design requirements
Nom.

• Narrow core only for modern door systems (NS)

• Flange screw fixing provided
• Two border styles available DV DVA DVC
Finishes
NS/DV PPG9010 (RAL 9010 Gloss - 80% Gloss White) 30-50
PPM9010 (RAL 9010 Matt - 20% Gloss White)
PPM9006 (RAL 9006 Matt - 30% Gloss Silver) 41
NSNL PPG9005 (RAL 9005 Matt - 30% Gloss Black)
Other colours or anodised finish available on request
Nom. - 25

Nom. - 19

Nom. - 25
Weights
9.8
Nom. - 2

Nom.

Nom.
NS 16 kg/m2 face area
Nom.

DV 19 kg/m2 face area

NSNL 29 kg/m2 face area NSNL NSNLA NSNLC
Sizes
Minimum size - 100 x 100mm 40-50
Maximum single section - 1200 x 1800mm Performance Nomogram
Fixings NOMINAL
AIR FLOW NOMINAL
Suffix C SF only RATE DUCT DUCT
Suffix A PSF (l/s) WIDTH (mm) HEIGHT (mm)
SF
3000 100
All others have no fixing (NF).
PIVOT
LINE

See page 32 for details. 200

Selection Criteria 2000

dBA is noise level based on a room absorption of

1500
8dB for sound power ref 10-12 W.
Selection Example
300 x 250 Grille Supplying 100 l/s 1000
150
• NS
Ps = 10 Pa 31 dBA
300
• DV dBA STATIC PRESSURE
LEVEL LOSS Ps (Pa)
Ps = 13 Pa 31 dBA 500
NSNL NS NS DV NSNL 200
• NSNL 400
DV
5 150
150
Ps = 23 Pa 35 dBA 53 4 100 100
150
300 53 3 400 250
50 100
50
45
Free Area 45 2 50
37
200 300
NS, NSA, NSC DV, DVA, DVC NSNL, NSNLA, NSNLC 37 10
10
29 1 500
5 10
41% 41% 34% 29 Pivot line 5

2 5
0.5 2
Pivot line 2 600
400
100
Order Example
NSA/300/300/PPM9010/R25/SF 700 500
Type
50 800
Nominal Width 600
900
Nominal Height
1000
Finish
Border
Fixing
20
 Grilles
19
Acoustic Transfer Grilles
DSR / DSRX
Introduction
The Waterloo DSR has been developed for use in partitions and
doors where a reduction in noise transfer or “cross-talk” from one
space to another is required, as well as ventilation air transfer.
The DSR is manufactured from high quality aluminium extrusions
with channel section cores forming a labyrinth airway lined
internally with acoustic damping media. The cores are retained
within a flanged frame which is fitted with a sealing gasket. DSRX
units are supplied with fixed border and matching adjustable rear
border frame.
DSR units will only provide acoustic isolation improvements over
that of a clear aperture. DSR units may be used in series to
increase transmission loss.
Product Description
DSR Acoustic transfer grille
DSRX Acoustic transfer grille for variable depth partition

38
Min Variable Max
of 40 to 100 mm with rear matching frame 40 100

20 40
DSR2 Back to back acoustic transfer grille

Nominal W x H + 51
*

Nominal W x H - 25
Features

Nominal W x H
60
• Suitable for partition, wall or door mounting
• Easy to install
• Fits most standard doors and partitions

20
• Easy to clean
• Modular sizes

60
Finishes
PPG9010 (RAL 9010 Gloss - 80% Gloss White)

38 20
PPM9010 (RAL 9010 Matt - 20% Gloss White) 75 DSRX
PPM9006 (RAL 9006 Matt - 30% Gloss Silver) 4.5
Other colours available on request 75 142 Minimum
Sizes Door / Partition mounting
Width 325 minimum to 1025 maximum in 100mm increments. 40 - 100mm thick DSR DSR2
Height 125 minimum to 1005 maximum in 80mm increments.

* Note: 30mm protrusion

with minimum depth of door

Selection Criteria Performance Nomogram

Select a DSR grille to handle 70 l/s when TRANSMISSION LOSS NOMINAL
mounted within a 100mm partition and a DUCT
TRANSMISSION LOSS (dB)

30
maximum permitted pressure loss of 20 Pa. HEIGHT (mm)
25
125
20
AIR FLOW RX
Spectrum Correction (Add to dBA) RATE 15 DS
R&
DS
(l/s) R2
10 DS
Frequency (Hz) 5
1000
125 250 500 1K 2K 4K
Pivot
Line

900 63 125 250 500 1K 2K 4K 8K

800
+1 +4 +3 0 -10 -16 FREQUENCY (Hz)
700 NOMINAL
600 DUCT 205
WIDTH (mm)
From Nomogram Select Size 425 x 365 500
Pressure loss = 16 Pa (DSR)
31 dBA 400 325
Sound Power Spectrum is:
300 REGENERATED PRESSURE 285
NOISE dBA LOSS Ps (Pa)
Freq (Hz) 125 250 500 1K 2K 4K DSR2 DSR 425
200 DSRX
SWL (dB) 32 35 34 31 21 15 50
365
80 40

45
525
40 20
35
445
100
25 20 10
90 625
80 15 Pivot
Line 525
70
725
60
605
50 825
Order Example 40
685
925
DSR/425/285/PPM9010 765
30 1025
Type 845
Nominal Width
925
Nominal Height
Finish 1005
 Grilles
20
Sidewall Grilles
WPT
Introduction
The Waterloo WPT grille is a sidewall grille made with an
aluminium frame and a steel perforated plate. Normally
mounted at high level. The perforations on the plate are angled
to supply air in a fixed direction.
The standard “plenum box” wall mounting that comes with a
supply grille is angled so the air stream is trained vertically
down the wall and along the floor. This floods the floor with
fresh cool air using the displacement principle.
When used for extract the grille should be mounted flush with
the wall.
This grille provides a good air distribution with low velocities,
WPT-T
low sound levels and minimal air mixing.
Product Description 75

WPT-T Supply Grille (including inclined plenum)

WPT-R Extract Grille (including AF-subframe)
Features
• High levels of comfort due to low velocities

175
125
• No plenum assembly in the duct is necessary

100
125
• Low noise levels
• Minimal mixing of the air
Finishes
Nom. W - 25
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
Nom. W + 25
PPM9010 (RAL 9010 Matt - 20% Gloss White)
Nom. W + 35
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Other colours available on request
Sizes WPT-R
Nom. W 225 to 925 mm in 100mm increments
Nom. H = 125 mm
Weights
WPT-T 15.0 kg/m² face area

125
150
WPT-R 14.5 kg/m² face area
Fixing Options
WPT-T Fixing plate
WPT-R AFCF (AF-subframe + clip fixing)
28
Selection Criteria Nom. W - 25
34
dBA is noise level based on a room absorption of 8dB for sound Nom. W + 25
power ref 10-12 W.
Performance Table
Selection Example WPT Supply

WPT-T/425/125 225 325 425 525 625 725 825 925

Air Volume 21 l/s m³/h l/s x x x x x x x x
125 125 125 125 125 125 125 125
Throw on floor 2.6 m
Pressure Drop 6 Pa T 3.0
Noise Level < 20 dBA 50 14 Ps 14

Lw -

T 4.0 3.0 2.6 2.4 2.2 2.0 1.6

75 21 Ps 26 12 6 4 3 3 2

Lw 31 - - - - - -

T 3.5 3.2 3.0 2.4 2.2 2.0 1.6

100 28 Ps 20 12 9 6 5 4 4
Lw 40 - - - - - -
T 3.5 3.2 2.6 2.4 2.2 2.0
125 35 Ps 18 14 9 8 6 5
Lw - - - - - -
T 4.0 4.0 3.0 3.0 2.6 2.2
Free Area 150 42 Ps 26 20 13 12 8 7
35% Lw 32 - - - - -
T 4.0 3.5 3.2 3.0
200 56 Ps 22 19 14 12
Lw 36 - - -
Order Example T 4.0 4.0 3.5
WPT-T/425/125/PPM9010 250 69 Ps 31 22 18
Type
Lw 39 38 34
Supply/Exhaust
Nominal Width T 4.0
Nominal Height 300 83 Ps 26
Finish
Lw 40
 Grilles
21
Fire Rated Transfer Grilles
WFV / WFVG
Introduction
The Waterloo fire rated ventilators are suitable for 1 hour rated doors and
partitions. The units, which satisfy BS 476 Part 22, incorporate intumescent
elements which expand and carbonise when exposed to temperatures in excess
of 150°C, thereby sealing off the ventilation opening. The ventilators may be
beaded directly into the door/partition opening or covered by optional steel grilles
to suit aesthetic requirements.
WFV units are constructed from hollow PVC extrusions enclosing PALUSOL 210
wire reinforced intumescent media. The extrusions are retained in a horizontal
louvre pattern by reinforced vertical members and an enclosing frame system.
Product Description
WFV Core only fire rated ventilator
W -2 O/A 40
WFVG Fire rated ventilator complete with 2 matching steel grilles

20 Pitch (Approx)
WFG Pair of steel grilles only
Features
• 1 hour fire rating to BS 476 Part 22
• Available in 5 standard sizes

H -2 O/A
• Easy to install
• Attractive appearance
• Available as core only
• Available with covering steel grilles

6mm Louvre
• Suitable for door and partition mounting
• Special assemblies available for partitions incorporating standard Waterloo
grilles
WFV WFG WFVG
Finishes
WFV - Silver PVC
Grilles - PPG 9010 Beading
Other colours available on request

Nominal size = Opening size

Sizes
Width (W) and height (H) are nominal opening sizes

Overall Size

Overall Size
Minimum size - 150 x 150mm
Maximum size - 600 x 600mm
Authority
Tested and Rated in accordance with BS 476 Part 22. Certificate number CF 564
(TS47).
Installation
WFV cores should be fitted into a cleanly cut aperture with a maximum gap of
5mm around the frames; gaps larger than this should be filled with intumescent
paste. The cores may be retained by screwing through the stack holes provided,
or by using a bead frame. Nominal Size mm Overall Weight Free Area
If supplied, the pressed steel cover grilles should be screw fixed through the WxH Size mm kg Measured
frame holes provided. WFV
Selection Criteria
150 x 150 185 x 185 0.45 56%
Performance is based on a ‘room to room’ application with the WFV mounted in a
partition or door. 200 x 200 235 x 235 0.80 58%
Q= Air flow rate through the ventilator at the stated differential
300 x 300 340 x 340 1.80 59%
pressure.
∆P (Differential pressure) = static pressure difference across the 600 x 300 645 x 340 3.60 60%
assembly. 600 x 600 645 x 645 7.20 61%
dBA is noise level based on a room absorption of 8dB for sound power ref 10-12 W.
Selection Example Performance graph
Select a WFV unit to handle 300 l/s with a maximum pressure loss of 25 Pa and 150x150 200x200 300x300
100
Noise level of 35 dBA. Enter graph at WFV
40dBA
∆ P = Differential Pressure (Pa)

Q = 300 l/s and extend upwards until a standard size may be selected which 35dBA
600x300
satisfies pressure and noise level specified. 50 30dBA
Size 300 x 300 WFV selected: 40
25dBA
• Pressure Drop 22 Pa dBA Level = 29 dBA 30

WFV
20
(Ventilator only)
600x600

10

Q 5
50 100 200 300 400 500 1000
Q = Air Flow Rate (l/s)
150x150 200x200 300x300
100
WFVG
45dBA
∆ P = Differential Pressure (Pa)

∆P
50 40dBA
40 600x300
WFVG 35dBA
30
Order Example (Ventilator plus 30dBA
20
cover grilles)
WFVG/300/300/Gloss White 25dBA
Type 600x600
10
Nominal Width
Nominal Height
Finish (If applicable) 5
10 20 30 40 50 100 200 300 400 500
Q = Air Flow Rate (l/s)
 Grilles
22
Light Duty Floor Grilles
AFG
Introduction
The Waterloo Light Duty Floor Grille has been
specifically designed for cill and floor applications
where light foot traffic will be experienced.
In addition, the AFG is available with any of the Airline
cores. This makes the product ideal for sidewall
applications where reinforced recessed frames are
necessary.
The AFG is constructed from aluminium alloy
extrusions with tube type cores and fully welded
frames. The core is supported by rear reinforcing bars.
Product Description
Nom. H + 12 Nom. W + 12
AFG Light Duty Floor Grille 3 12.5 3 3 3
OBSS Allen key operated opposed blade damper
ED

19
Equalising Deflector

(OBSS open)
44.5
35
PBLG Plenum Box

87.5
Features
• Removable cores for easy access and cleaning OBSS
• Core retaining clips for security/safety
• Various core styles
• Recessed frame detail Nom. H - 7 Nom. W - 7
• Robust enough for light foot traffic on floors or cills Nom. H Nom. W
• Suitable for low level sidewall applications
• Solid extruded blades Terminal Velocity Correction Factors
Finishes Vt (m/s) 0.6 0.5 0.4 0.3
PPG9010 (RAL 9010 Gloss - 80% Gloss White)
PPM9010 (RAL 9010 Matt - 20% Gloss White) Throw multiplier 0.8 1.0 1.3 1.66
PPM9006 (RAL 9006 Matt - 30% Gloss Silver)
Nylon Decanol Grille Length Correction Factors
Other colours available on request Length (m) 0.25 0.5 1.25 2 2.5 3
Weights
AFG 12 kg/m face area
2 dBA addition 8 11 13 14 15 17
OBSS 9.5 kg/m2 face area
Throw x 0.9 0.9 1.0 1.0 1.1 1.1
Sizes
Minimum size - 150 x 50
Maximum size - N/A x 300 Non-isothermal Jet Correction Factors
(Maximum single section 1800 x 200) Differential 10°c cooling 0°c 10°c heating
Exhaust Air Correction Factors Sidewall throw 0.9 1.0 1.1
Static pressure loss = supply pressure x 1.2 Cill throw 0.9 1.0 1.1
dBA level = supply + 4dB
Point load
(25x25mm point load over any 2 blades)
Distributed load (typically foot traffic)
Grille height (mm) up to 200
Grille height (mm) 100 200
Max. static load (kg) 105
Max. static load (kg) 960 480
Max. shock load (kg) 42
Max. shock load (kg) 384 192
Safety factors: Static load = 2, Shock load = 5 Performance Nomogram
Selection Criteria AIR FLOW NOMINAL
RATE
Performance data is based on isothermal (l/s/m) DUCT
THROW (m) HEIGHT (mm)
conditions for a 1.25m long grille mounted 1000 (Vt = 0.5 m/s) VELOCITY (m/s)
adjacent to a wall surface. dBA is noise level 900
25mm from
800
based on a room absorption of 8dB for sound 40 grille face
700
power ref 10-12 w. 50
600 30 STATIC PRESSURE
Throw is the distance to where the envelope
500 LOSS (Pa)
velocity equals 0.5m/s. For grilles mounted 20 250
dBA 200
more than 500mm from a wall reduce the 400
13
150
LEVEL
throw by 1/3 . 10
100 75
45 8
300
Selection Example AFG/2000/150 7
6
50
250 10
Air Volume 200 l/s/m 37
5
Throw = 6 m 200
29
4
100

25 dBA + 2 dB length correction = 27 dBA 3 10

Ps = 8 Pa 150 5 21
2 5
4
150
Free Area Pivot
100 3 Line
49% 90
80 200
2
70

Order Example 60 Throw

50
AFG/1500/150/PPM9010 1
40
Type
30
Nominal Width
Nominal Height
Finish 20
 Grilles
23
Heavy Duty Floor Grille - Tile Replacement
HDFG
Introduction
The Waterloo HDFG Heavy Duty Floor Grille has been designed for
commercial and industrial applications where heavy foot traffic is
experienced. The HDFG is a 600mm tile replacement, structurally
complying to the Extra Heavy Duty Class of BS EN 13264-2001.
Product Description
HDFG Extra heavy duty floor grille, tile replacement.
OBSS Opposed blade damper
HMD Low height hit-and-miss damper
BL Blanking plate
Features
• Tested to, and complied with, BS EN 13264-2001 Ventilation 599

for Buildings - Floor mounted Air Terminal Devices - Test for

Structural Classification - Extra Heavy Structural Class.
• Improved additional strength design.
• Suitable for most pedestal flooring systems.
• Easy “Drop in” installation.
• Two choices of damper, including low height version
• Convenient damper adjustment.
• Dampers and blanking plate can be supplied factory-fitted, or can
be retro-fitted on site if necessary.
Floor compatibility
• Matches most raised floor systems based upon 600mm x 600mm

599
module.
• Configurable to match floor thickness’s 30mm to 50mm.
Finish
• Mill finish as standard.
• Powder or anti-static nylonic coating options available on request.
Weights
HDFG 10 kg per grille
OBSS 9.5 kg/m2 face area
Sizes
Nominal 600mm x 600mm tile replacement
(599mm x 599mm actual).

75 Min.
115 Including 30
Including Hit & Miss
OBSS Damper
Damper Pedestal
Head

OBSS (Optional)

HDFG
600x600 Tile Replacement
Flow rate No OBSS OBSS H&M H&M
19 12.35 19
(l/s) Damper 100% 50% 100% 50%
6
T 0.6 0.7 0.9 0.8 1.1
100 Ps 1 2 4 3 5
Lw <20 <20 20 <20 21
T 1.1 1.2 1.7 1.5 2.0
200 Ps 3 4 6 5 9
Lw <20 <20 21 21 23
T 1.9 2.0 2.7 2.4 3.2
568 x 568
300 Ps 5 6 13 12 22
Lw 21 21 25 25 31
T 3.0 3.2 3.9 3.6 4.4
400 Ps 9 10 25 23 40
Free Area
Lw 27 28 33 32 41-
33%
T 4.2 4.4 5.1 4.9 -
500 Ps 13 15 40 34 -
Order Example Lw 34 36 41 20 -
HDFG/38/MILL/OBSS T 5.6 5.9 - - -
Type
Floor Thickness 600 Ps 17 22 - - -
Finish Lw 42 44 - - -
Option
ΔT = 6˚c
Throw (m) at 0.25 m/s
 Grilles
24
Heavy Duty Floor Grilles - Linear
HDFG-L
Introduction
The Waterloo HDFG heavy duty floor grille has been
designed for commercial and industrial applications
where heavy foot traffic is experienced. The L type is
for linear applications; it is available with a recessed
border style. This improved design is suitable for use
with most types of raised floor pedestal system.
Product Description
HDFG-L Linear
OBSS Opposed blade damper
BL Blanking plate
Features
• Reversible core (0° or 15° discharge)
• Suitable for most pedestal flooring systems Nom. L
• Facility for on site blanking
• Recessed border style
• Border alignment facility
Finish

Nom. W
Mill finish as standard, powder or antistatic nylonic
coating options available on request.
Advantages
• Integrated design features - enabling tile and linear
grille combinations for aesthetic continuity
• Improved additional strength design Single unit
12.5
• Easy “Drop in” installation
• Convenient damper adjustment
Weights Nom. L
HDFG-L 18.0 kg/m2 face area
OBSS 9.5 kg/m2 face area
Sizes
Length maximum single section 1000mm
Width minimum 100mm
maximum 600mm

End section

Nom. L

Intermediate section

Nom. W
28

66
59

Free Area
12.5
100

47%

Nom.W - 40

Order Example HDFG-L + OBSS / / HDFG-L + BL

HDFG-L/1000/300/MILL/OBSS/BL
Type
Section Length
Section Width
2 alignment strips supplied with
Finish
each section for site fixing.
Damper
Blanking Plate
 Grilles
25
Heavy Duty Floor Grilles - Linear
HDFG-L

Selection Example Load Deflection Characteristics

HDFG-L / 1200x200 • HDFG-L Floor Grille 300mm Wide
Air Volume 250 l/s/m Load applied on grille centre line
Throw 3.6 m distributed over 25mm x 25mm point
Pressure Drop 7 Pa between blade supports. Maximum
Noise Level 27 dBA recommended point load 360kg.
• HDFG-L Floor Grille 600mm Wide
Spectrum Corrections Load applied on grille centre line
Frequency (Hz) 125 250 500 1k 2k 4k distributed over 25mm x 25mm point
between blade supports. Maximum
Supply +9 +13 +12 +6 +2 -2 recommended point load 180kg.
Exhaust +9 +11 +12 0 -5 -11

Performance Table
Supply Extract
HDFG-L
Nom. Grille Width (mm) Nom. Grille Width (mm)
m3/h/m l/s/m 100 150 200 300 450 600 100 150 200 300 450 600
HDFG-L - Linear Corner Sections
T 1.8
180 50 Ps 2 3
Lw <20 <20

W
T 2.7 1.5
270 75 Ps 4 1 6 2
Lw <20 <20 <20 <20

e
T 3.6 2.3 1.3

gl
An
360 100 Ps 7 3 1 13 4 2

300
Lw 27 <20 <20 32 <20 <20
T 4.4 2.7 1.8
450 125 Ps 12 4 2 20 6 3
300
Lw 34 <20 <20 39 <20 <20
T 5 3.2 2.3 1.3
540 150 Ps 16 6 3 1 28 9 4 2 15˚ 0˚
Lw 37 25 <20 <20 44 28 <20 <20
T 5.5 3.6 2.7 1.7
630 175 Ps 22 7 4 2 37 13 6 3
Lw 40 27 <20 <20 48 32 <20 <20
T 6 4.2 3 2
720 200 Ps 29 10 6 3 50 17 9 4
Note:
Orders for corner sections will be
Lw 44 31 <20 <20 52 37 26 <20 made to the configuration shown
T 4.9 3.6 2.5 1.3 with a 90° angle. Requirements for
angles other than 90° should be
900 250 Ps 16 7 4 1 28 13 5 2
identified with a customer drawing
Lw 37 27 <20 <20 43 32 <20 <20 or site template.
T 5.5 4.3 2.7 1.8 1.2
Orders for installations which
1080 300 Ps 22 11 4 2 1 37 18 6 3 2 include corner sections should
Lw 41 32 <20 <20 <20 48 37 <20 <20 <20 clearly identify any preference for
core discharge angle relative to
T 7.3 5.7 4 2.7 2
the layout (0° or 15°). Unless
1440 400 Ps 32 22 10 4 2 39 17 6 3 specified otherwise, corners will be
Lw 50 41 31 <20 <20 50 36 <20 <20 manufactured for 0° deflection.
T 7 5 3.6 2.7
2160 600 Ps 44 17 7 4 30 13 6
Order Example
Lw 48 37 27 <20 48 32 <20
T 6.2 4.5 3.4 HDFG-L/300/90°/300/100/MILL
Type
2880 800 Ps 30 13 7 22 10
Length 1
Lw 44 35 25 42 30 Corner Angle
T 7.2 5.5 4.3 Length 2
Section Width (W)
3600 1000 Ps 47 21 11 36 18 Finish
Lw 49 42 33 50 40
 Grilles
26
Aircell Polymer Grilles
S/D/G/A/T/E
Introduction
The Aircell range of supply & exhaust grilles are injection
moulded in self-coloured white.
Aircell S (Single deflection) and Aircell D (Double deflection)
have individually adjustable vanes on a 19mm pitch to allow
jet spread or deflection to be set within 45° of the duct axis.
Aircell G (0° fixed blade) has horizontal 0° fixed blades on a
20mm pitch.
Aircell A (45° fixed blade) can be used as a wall or ceiling
mounted grille.
Aircell T (45° fixed blade) are supplied as a pair of reduced
stack Aircell A grilles for door mounting. Aircell - S Aircell - D
Aircell E (Eggcrate) has a lattice core with a 13mm pitch and 46.5
46.5 49 5 30
is suitable for all exhaust applications. 5 5

All types are available in 5 standard sizes, plus an E600 which

33

33

33
has been specifically designed for full ceiling tile replacement.
The E600 has an overall size of 596mm x 596mm and for the

Nom. + 41
Nom. + 41

Nom. + 41
Nom. - 25
Nom. - 25

Nom. - 25
North American market 603mm x 603mm overall (E603) and

Nom.

Nom.
Nom.
for the German Market, 621mm x 621mm overall (E621).

20
Waterloo Aircell products can be used in any air distribution

19

19
system where temperatures do not exceed 50°C.
Product Description
Aircell S Single deflection grille
Aircell D Double deflection grille
Aircell G 0° fixed blade grille Aircell S Aircell D Aircell G
Aircell A 45° fixed blade grille 46.5 min.40 46.5
5 30 5 5 30
Aircell T 45° fixed blade grilles for door transfer
Aircell E 13mm Eggcrate grille

33
33

33
GO Opposed blade damper in black engineering polymer
N Neck reducer in black engineering polymer

Nom. + 41
Nom. + 41

Nom. + 41

Nom. - 25
OBSS Aluminium opposed blade damper for E600
Nom. - 25
Nom. - 25

12.5
Nom.

Nom.
NR Steel neck reducer for E600
Nom.

Features
19

19

• Consistent high quality

• Moulded in easy to clean engineering polymer
• Suitable for high-cleaning regime and chlorinated
environments
Fixing Aircell A Aircell T Aircell E
Screw through face flange Performance Table
Finishes
Self-coloured white Aircell G Extract
Advantages m³/h l/s 150 x 150 200 x 200 250 x 250 300 x 150 300 x 300
• Good size range
• Standard size neck reducers
• No visible mitres 90 25 Ps 2 1
• Available ‘off the shelf’ Lw <20 <20
Authority
Fire Rating: BS476 Pt 7 Class 0. BS476 Pt 5,
P Rating. 180 50 Ps 10 3 1 3
Lw <20 <20 <20 <20

Weights WxH 360 100 Ps 39 13 5 10 2

S 7.0 Kg/m² 150 x 150 Lw 33 28 <20 <20 <20

D 7.2 Kg/m² 200 x 200

G 7.7 Kg/m² 250 x 250 540 150 Ps 90 30 10 23 5

A 10.2 Kg/m² 300 x 150 Lw 42 38 19 30 18

T 7.7 Kg/m² 300 x 300

E 10.9 Kg/m² 720 200 Ps 53 18 40 9
GO 7.6 Kg/m² Lw 45 26 36 25
N 6.4 Kg/m²
900 250 Ps 85 29 63 15
Lw 51 32 41 29
Order Example
Aircell G/300/300/GO/N 1080 300 Ps 42 90 22
Grille Type
Lw 36 45 33
Nominal Width
Nominal Height
Option 1 1440 400 Ps 72 40
Option 2
Lw 44 39
 Grilles
27
Aircell Polymer Grilles
S/D/G/A/T/E
Selection Example
Aircell D-250 x 250 with straight blades
Air Volume 250 l/s
Throw 13.0 m
Pressure Drop 15 Pa
Noise Level dBA 29

45° Blade Angle Correction Factors For S & D

Throw multiplier dBA addition Pa multiplier
0.55 +8dB 3.1 Aircell - G Aircell - A

Performance Table
Aircell E Extract Aircell S Supply
Aircell D
150 200 250 300 300 600
m³/h l/s x x x x x x 150 200 250 300 300
150 200 250 150 300 600 m³/h l/s x x x x x
150 200 250 150 300
T 2.1
90 25 Ps 2
90 25 Ps 1
Lw <20
Lw <20
T 4.7 3.4 2.6 2.9
180 50 Ps 10 3 2
180 50 Ps 3 2 1 1
Lw <20 <20 <20
Lw <20 <20 <20 <20
T 8.5 6.4 5.1 6.0 4.3
360 100 Ps 40 11 5 10 2
360 100 Ps 14 8 3 6 1
Lw 38 <20 <20 <20 <20
Lw 34 <20 <20 <20 <20
T 14 9.4 7.7 9.4 6.4
540 150 Ps 26 11 22 5
540 150 Ps 29 18 6 12 2
Lw 32 <20 32 <20
Lw 46 26 <20 20 <20
T 18 12 10 12 9
720 200 Ps 45 19 39 9
720 200 Ps 52 31 10 21 3
Lw 41 28 41 <20
Lw 54 35 22 33 <20
T 16 13 15 10
900 250 Ps 72 30 62 14
900 250 Ps 48 15 32 5
Lw 49 36 48 21
Lw 42 29 40 <20
T 20 15 18 13
1080 300 Ps 42 88 20
1080 300 Ps 66 21 45 7
Lw 43 54 28
Lw 47 34 45 23
T 20 17
1440 400 Ps 74 35
1440 400 Ps 36 12
Lw 53 40
Lw 43 30

1800 500 Ps 55 4
Lw 49 <20

2700 750 Ps 8
Lw <20

3600 1000 Ps 14
Lw 27

4500 1250 Ps 21
Lw 36

5400 1500 Ps 30
Lw 44
 Grilles
28
Aircell Polymer Grilles
S/D/G/A/T/E

Performance Table
Aircell A Extract
150 200 250 300 300
m³/h l/s x x x x x
150 200 250 150 300

90 25 Ps 10 4 2 2
Lw 26 20 <20 <20
Aircell - T Aircell - E

180 50 Ps 40 15 6 10 3
Lw 40 33 <20 30 <20 Selection Criteria Selection Example Aircell A-200 x 200
Ceiling height 2.7m Air Volume 50 l/s
dBA is noise level based on Pressure Drop 15 Pa
360 100 Ps 57 24 39 11
a room absorption of 8dB. Noise Level 33 dBA
Lw 47 33 43 25

540 150 Ps 50 88 25 Free Area

Lw 44 51 36 150 x 150 200 x 200 250 x 250 300 x 150 300 x 300 600 x 600
S 49% 53% 58% 53% 59% -
720 200 Ps 45 D 49% 53% 58% 53% 59% -
Lw 44 G 58% 60% 64% 62% 67% -
A 32% 30% 37% 33% 36% -
900 250 Ps 70 T 32% 30% 37% 33% 36% -
Lw 50 E 44% 50% 51% 49% 53% 56%
For performance of the Aircell T series, please
multiply the above pressure loss by 2 and add
3db to the dBA level.
ØD (Ø315 / Ø400)

Please note that when using the N series neck reducer,

50

air volumes must not exceed the following guidelines.

Grille Spigot Maximum Volume

102

WxH ØD m�/h l/s

150 x 150 97 99 28
200 x 200 147 223 62 13 578 x 578
5

587 x 587
250 x 250 197 396 110
595 x 595
300 x 150 97 99 28
E600 + OBSS + NR
300 x 300 247 619 172
80

Accessories
Aircell GO Opposed Blade Damper
Aircell GO series opposed blade dampers are manufactured
from injection moulded components in self-coloured black
Nom. - 16
Nom.

engineering polymer. Adjustable through the grille face, the

damper can be clipped directly onto the grille without fixings.
Aircell N Neck Reducer
Aircell N series neck reducers are injection moulded in self
coloured black engineering polymer. The units are available
in five sizes to suit the grille range and are designed to snap
Aircell D + GO GO Polymer Opposed
fit over the opposed blade damper or directly onto the grille Blade Dampers
stack.
All reducers have standard size circular spigots related to the
grille height (see dimensional details below).

OBSS damper and NR neck reducer for E600 series

Nom. - 8

The OBSS aluminium opposed blade damper and NR steel

øD

neck reducer are available for the E600 series to allow volume
control and circular duct connection directly onto the E600
grille.
Please state spigot size required when ordering. 50
162.5

Aircell G +GO+ N N Polymer Neck Reducer

 Grilles
29
Grille Plenum Chambers
Introduction
Correct selection and sizing of distribution plenum chambers is
critical because grille air resistance is very low relative to the
distribution ductwork resistance. It is therefore recommended
that whenever possible grilles are served by low velocity
stub ducts from branch ducting systems fitted with correct H D
50
balancing controls.
H
Where it is necessary to specify and use grille plenums a
generous allowance for commissioned noise generation should
be made.
Product Description W
W
PBG Individual grille plenum
PBG/LL Low line grille plenum PBLG/LL - Top entry Low-line PBLG - Side entry Linear
NRG Neck reducer linear grille plenum box. grille plenum box.
PBLG Linear grille plenum
PBLG/LL Low line linear grille plenum
PBSG Security grille plenum
Spigot Options
SE Side Entry 35

TE Top Entry
1CC 1- Circular Connection

Diameter
1RC 1- Rectangular/Square Connection

Spigot
H
1FO 1- Flat Oval Connection
Features 50 H
• Plated steel with stitched seam joints.
• Standard circular connection diameters: 97, 122, 157, 197,
W
247, 312 and 397 Ø
W L
• Available with circular, square,rectangular or flat oval spigots
in either top or side entry applications
• Standard or Low-line configurations PBG - Side entry grille NRG - Neck Reducer
• Optional 6mm internal thermal/acoustic lining plenum box

FDC FDQ OBCO OBSS / ED

Cord operated flap Flap damper with external Cord operated opposed Standard opposed blade
damper for mounting quadrant control for blade damper for damper for diffuser or duct
within circular spigots mounting within circular installation within square mounting. Adjustable by
to plenum chambers. spigots to plenum or rectangular spigots to screwdriver inside the duct
The cord should be chambers. The quadrant is plenum chambers. The cord or through the face of the
fed through the air accessible from outside the should be fed through the air terminal device. The ED
terminal device ready duct and the damper can be air terminal device ready for is an individually adjustable
for commissioning. locked in any position. commissioning. blade device for equalising
airflow across the diffuser.

Standard Frames
Standard Frames Sub Frames
16 25 32 RC RF AF
12.2 4 12.2 4 12.2 4
5

10.9 10.9 10.9

32/48

32/48
32/48

R16 R25 R32 RCCF AFCF AFVS

RCHS PFVS AFHS

Overall Grille Sizes

Grille with R16 = Nominal W/H + 7mm Note:
Grille with R25 = Nominal W/H + 25mm AF and RC subframes can be made to a maximum size of 800mm in any direction in
one piece. For sizes above that, we supply in parts for assembly on site by others.
Grille with R32 = Nominal W/H + 39mm
Grille with RC = Nominal W/H + 39mm
Grille with PF = Nominal W/H + 21mm
 Grilles
30
Controls and Fixing Options
Fixing Options
16 16 H -25 7.5 12.2 H -25 12.2 H -25

6.6

Frame: R16 Frame: R25 / R32 Frame: R25 / R32 Frame: R25 / R32
Mounting: RCCF Mounting: SF Mounting: AFCF Mounting: AFHS

OBSS
16 16 H -25 12.2 H -25
10º
15 Min. (T32)
30 Min. (T48)

6.6

50 (T32)
65 (T48)

40 Max.
5 Min.
BSSBD (R16 / R25 / R32)
12.2 H -25
Duct / Plasterboard fixing
Frame: R16 Frame: R16 / R25 / R32 Frame: R16 / R25 / R32
Mounting: RCHS Mounting: CF Mounting: CRB

23 (T32)
39 (T48)
13 (T32)
29 (T48)
20 (T32)
35 (T48)

12.2 H -25 12.2 H -25 12.2 H -25

BSSBP (R16 / R25 / R32) Frame: R25 Frame: R25 Frame: R16 / R25 /R32
Plenum fixing (-15mm) Mounting: AFVS Mounting: PFVS Mounting: VS

Control Options - Grille Mounted Grille Nominal Sizes

43 mm Nominal + 7
open

BORDER 16

OBSS - Opposed Blade Damper Nominal -25 l/s Stack

(Volume Control Damper- Capable of Shut Off) Nominal -22.4 O/S Stack
Nominal size
35 mm
open

Nominal + 25

ED - Equalising Deflector BORDER 25

(Directional Blades Incapable of Shut Off)
Nominal -25 l/s Stack
Nominal -22.4 O/S Stack
DT-2M - Duct Fitted Nominal size

The hinged strip is used to

calibrate the amount of air
desired, by altering the angle Nominal + 39
of the blades and therefore
altering the amount of
disruption to the airflow.
BORDER 32

Nominal -25 l/s Stack

Correction for Grille + Damper Nominal -22.4 O/S Stack
Supply 0° spread dBA + 2 Ps x 1.3 Nominal size

Supply 45° spread dBA + 2 Ps x 1.1

Exhaust dBA + 2 Ps x 1.2
 Grilles
31
Controls and Fixing Options
Grille Fixing Selection
Types SF CF CRB VS AFVS PFVS BSSB AFCF AFHS RCCF RCHS
1H / 2H / 1V / 2V A/C A A/C A/C A/C A/C A/B/C A A/C A A/C
1KH / 2KH A/C
1KV / 2KV A/C
1HM / 2HM A/C
1VM / 2VM A/C
PER / 3HF A/C A A/C A/C A/C A A
GC5 / 3HG / 3HJ A/C A A/C A/C A/C A/C A/B/C A A/C A A/C
ALF / ALG10 / ALJ10 A/C A A/C A/C A/C A A
ALN / ALM / ALG / ALJ A/C A A/C A/C A/C A/C A/B/C A A/C A A/C
ALG2 / ALJ2 A/C A A/C A/C A/C A/C A A/C A A/C
ALM2 / ALN2 A/C A A/C A/C A/C A/C A A/C A A/C
2ALF / 2ALM / 2ALJ A/C A A/C A/C A/C A/C A A/C A A/C
NSA / NSB / DVA / DVB A/C
DVC / NSC A/C A A/C A/C A/C A A
RTC / 2RTC A/C
16T/25T/32T

16T/25T/32T

16T/25T/32T

RTC-R16

RTC-R16
BORDER

RTC/16T
25T/32T

25T/32T

25T/32T

25T/32T

25T/32T
STYLES

16T/

16T/
25T

A = SUITABLE FOR DUCTING AND WALL

B = SUITABLE FOR PLASTERBOARD
C = SUITABLE FOR CEILING

Removable Cores
Types Removable RCCF RCHS PFVS AV AFCF AFHS RTC RCG - GC5 Special
1H/2H/1V/2V Grille B B B N N N
PER/GC5 Grille B B B N N N
RCG - GC5 Core B
3HG/3HJ Grille B B B N N N
3HG/3HJ Core B B
3HF/ALF Grille B B N N
3HF/3HJ Core B B
ALN/ALM/ALG/ALJ Grille B B B N N N
ALN/ALM/ALG/ALJ Core B B
ALG10/ALJ10 Grille B B N N
ALG10/ALJ10 Core B B
NSC/DVC Grille B B N N
RTC/2RTC Grille B
RTC/2RTC Core B

B = BEADED FRAME
N = NON BEADED FRAME
RTC = R5 OR R16 FRAME WITH CORE AND PACKERS
SPECIAL = PART 6200001 FRAME WITH CORE AND BRACKET INCORPORATING TERRY CLIP
 Grilles
32
Technical Information
Basis of Throw
Unless noted differently on the individual supply grille performance information, all Throw performance data is based on isothermal
supply air conditions, to a terminal velocity (vt), in the centre of the jet, of 0.5 m/s. See tables below for other conditions.

Throw Throw

Remark:
vt vt If the distance between grille and
300mm ceiling is more than 300 mm, the
max throw will be reduced by 30%.

Sill Sidewall

Jet Temperature Decay Characteristics Working Example for Temperature Decay

The following graph indicates the jet residual temperature at Calculations
various throw distances. 1H/300/150/R25/SF
Given throw = x (m) and supply air differential = ∆To Supply Air Temp = 18 °C
Calculate √Ac = √Grille Area (m²) Room Temp = 20 °C
Calculate x/√Ac ∆To = 2 °C
Enter graph at required value x/√Ac Air Volume = 200 l/s
Exit graph at value ∆Tx /∆To From Performance data see page 24
Calculate ∆Tx = ∆To x (∆Tx / ∆To) Throw = 8.32 m
∆Tx = Residual temperature differential (°C) x√Ac = 8.32/ √(0.3 x 0.15) = 39.22
Therefore = ∆Tx = 0.375 °C and the air temperature
at maximum throw (8.32 m) is = 19.6 (19.625) °C

Throttled Damper Factors

PR = P (Grille) / P (Duct)

1.0
SUPPLY
4

0.8
ѕ

0.6
Tx TY 2
To PI
CA
0.4 LG
ѕ

RI 1
LLE 5 10 15 20 25 30
eg. 0.1875

0.2 dBA addition

EXHAUST
PR = P (Grille) / P (Duct)

0 5
0 10 20 30 40 50

x/ Ac eg. 39.22 4
ѕ

2
Example of Throttled Damper Factor Handling
ѕ

Consider a Supply Grille with Damper

1
PS (Grille) = 50 Pa 5 10 15 20
PS (Duct) = 20 Pa dBA addition
PR = 2.5
Therefore addition is = 18 dBA
Assume that we are using the same grille as in the
Temperature Decay Calculation (above);
From the Performance data on page 8,
dBA = 30 + 18 = 48 dBA
Grilles
33
Grilles
34
 Waterloo Product Directory

Waterloo Product Range

GRILLES
A complete range of products suitable for all wall, ceiling and floor applications.
Most grilles are made from aluminium and have a range of fixed or moveable
blades designed to give performance whilst remaining aesthetically pleasing
to the eye. Grilles are made to customer specified sizes and colours (PPM/G);
standard colour PPM9010 (20% Gloss White). The range is complemented by
the Aircell range of polymer Grilles.

DIFFUSERS
Designed to be installed in various ceiling systems, we have a complete range
to suit both performance and aesthetical requirements. Most diffusers are made
from aluminium and can be ordered with or without plenum chambers for easy
duct work. Diffusers can be ordered in customer specified colours (PPM/G);
standard colour is PPM 9010 (20% Gloss White). This range is complemented
by the Aircell range of polymer Diffusers.

ACTIVE AND PASSIVE CHILLED BEAMS

The finest quality range of high output active beams, used for ventilated heating
and cooling applications. These units have 4 pipe coils to allow heating and
cooling circuits to run simultaneously, giving constant and responsive control.
The design allows a large optimum capacity and also allows the customer to
specify the nozzle type and pitch for individual circumstances.

Active beams are made from steel to a large range of customer specified sizes
and as such are suitable for various different ceiling systems. Standard finish is
PPM 9010, however other (PPM/G) colours are available on request.

AIR VOLUME CONTROL DAMPERS

Pressure independent Variable Air Volume and Constant Air Volume dampers
made from zintec plate. Most volume dampers are regulated with an electronic
motor and sensors and are calibrated to customer specifications before delivery.

The Constant Air Volume damper requires no power source as it is controlled

via a mechanical device and calibrated before delivery. All volume dampers can
be ordered with a single or double (insulation) skin.

EXTERNAL LOUVRES
A quality range of products for external wall applications. Made from aluminium,
with birdscreen or insect screen options. All louvres are made to customer
specified sizes and (PPM/G) colours; standard colour is PPM 9006.

DISPLACEMENT
A full range of recessed, semi-recessed, floor, wall and corner units providing
high ventilation efficiency and excellent comfort. The very low pressure
involved also offer quiet installations. Displacement units are available as wall
or floor mounted, or indeed integrated within the architectural design.
Authorized Distributor in UAE

OC Waterloo
Ondernemersweg 2
7451 PK Holten
Utmost Building Materials The Netherlands
P.O. Box 55014, Dubai, UAE
T: +971 4 3553 883 T: +31(0)548 374 374
F: +971 4 3553 776 F: +31(0)548 364 165
E: [email protected] E: [email protected]
W: www.utmostgrp.com www.suhailbahwangroup.com W: www.oc-waterloo.nl

All products conform to the Terms and Conditions of OC Waterloo a copy of

which are available upon request. Due to our continuous research and
development programme, OC Waterloo reserve the right to alter products and
prices without prior notification.

OC Waterloo declare that, at the time of print, all products are

in accordance with relevant directives, as identified by HEVAC
and other European Organisations and will display the
CE Marking where required.