WM27PX9019

WH32UX9019
WM32DX9019
1
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS
INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This “bolt of lighting” indicates unin- The “exclamation point” calls atten-
sulated material within your unit may tion to features for which you should
cause an electrical shock.For the safety of read the enclosed literature closely to pre-
everyone in your household, please do not vent operating and maintenance problems.
remove product covering.

WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids, such as vases, should not be placed on this
apparatus.

2
I.Safety Prevention Measures

Please always place The altitude and the Do not hold the plug Do not use a broken
this device on a stable tropical environment with wet hand; power plug nor keep
surface; otherwise, the adapter fits depend otherwise, electric a power cord near heat
it may fall and be on which adapter is s h o c k m a y o c c u r. source; otherwise,
damaged. used for the device. Make sure the plug electric shock or
The rating plate on has a good touch fire may occur.
the back of the device because poor touch
with the above warning may cause fire.
sign indicates that
this product is
applicable for the
safe use of the region
with altitude of
2,000m and below.

When cleaning the Do not disassemble In case of rare smell When this device
device, be sure to this device without or noise out of this is idle for long time,
remove the power permission. In case device, be sure to be sure to power it
plug, use a piece of failure, be sure to immediately cut off off; otherwise, electric
of soft cloth rather contact a professional the power supply and shock or fire may
than industrial servicing person to fix ask a professional occur.
chemical to clean it. The unauthorized servicing person to
the device, be sure disassembly of this fix the problem.
not to let water enter device may result
the device. in electric shock or
fire.

Note:
The device with AC switch may use such AC switch as cut-off component.
The device without AC switch may use power plug or coupler as cut-off component.
In case of the normal use of the equipment, make sure the cut-off component
can be accessed easily.

3 All specifications and informations are subject to change without notice.

II.Installation Instructions

1.Accessories

Power cord Base/Stand

Signal cable Warranty card

User manual Quick Start Guide

Screws

(The above pictures are for illustration only and the physical accessories shall govern.)

2. Angle Adjustment
2.1 The screen can be adjusted by 2.2 When adjusting the angle of the
inclining forward and backward; monitor, be sure not to touch or press
however, the specific adjustment the area of the screen.
depends on the specific model of
the device. Generally, it may be
inclined 5±2°forward and 15±2°
backward.

(The above pictures are for illustration only and the physical accessories shall govern.)

All specifications and informations are subject to change without notice. 4

III. Connect the Monitor to PC

1 2 3 4 5 6 7

Before connecting the LCD monitor to the PC, please power down the PC and
the monitor.
1 VGA Port
Connect the VGA cable into the VGA IN port
in the back of the monitor (this needs the support of
the monitor).

2 HDMI Port
Connect the HDMI cable into the HDMI IN
port into the back of the monitor (this needs
the support of the monitor).

3 DP Port
Connect the DP cable into the DP IN port of
the monitor (this needs the support of the monitor).

4 USB OUT Port

Connect the USB cable into the USB OUTport
Model with inbuilt power supply in the back of the monitor (this needs the support of
* Warning: Always use the power the monitor).
cord of standard configuration.

5 USB IN Port
Connect the USB cable into the USB IN port
in the back of the monitor (this needs the support of
the monitor).

6 Audio Interface
Connect the AUDIO cable to the AUDIO OUT port in
the back of the display (this needs the support of the
monitor).

7 Power Plug
Connect the power cord of the monitor into the
POWER port in the back of the monitor.

(The above pictures are for illustration only and the physical accessories shall govern.)

5 All specifications and informations are subject to change without notice.

IV. User Setup
1. Schematic Diagram of Keys

M 1

E 4

2. Description of Keys' Functions

Pops up the menu/Backs to the previous menu (in case of main menu,
1. M exits from the whole menu).

When the OSD is opened, as the up/right function selection key,

2. ▲ the progress bar value increases,Hotkey for the specified shortcut
mode when the OSD is closed.

When the OSD is opened, as the down/left function selection key,

▲ the progress bar value decreases.When the OSD is closed, as the
3. specified shortcut hotkey, with the atmosphere lamp machine, for
the atmosphere lamp switch shortcut key.

If the menu is activated, chooses the corresponding function.

When the menu is inactivated, press this button to enter the automatic
4. E adjustment function; the automatic adjustment function will automatically
set the horizontal vertical position, always and focus (only for VGA signal)

5. Power switch: Powers on/off the monitor.

LED
6. indicator lighting: Turn on; Flash: stand-by.
light

Note: The physical keys of the specific model shall govern.

All specifications and informations are subject to change without notice. 6

V. Operation Menu (OSD) Function Descriptions
First level First level Second level Second
level Third level Third level Description
menu item menu icon menu item menu icon menu item menu icon

Brightness NONE NONE NONE NONE Adjust display brightness

Contrast NONE NONE NONE NONE Adjust display contrast

On NONE NONE Activate dynamic contrast

Off NONE NONE Inactive dynamic contrast

DCR
Return NONE NONE Return to the previous menu

Exit NONE NONE Exit from the whole menu

Standard NONE NONE Normal work mode

Movie NONE NONE Movie mode

FPS NONE NONE FPS game mode

Mode RTS NONE NONE RTS game mode

EyeSaver NONE NONE Eye protection ray filter application mode

Return NONE NONE Return to the previous menu

Exit NONE NONE Exit from the whole menu

Cool NONE NONE Set as cold color temperature

Warm NONE NONE Set as warm color temperature

Red Fine tuning of red color temperature

Color Temp. User Green Fine tuning of green color temperature

Blue Fine tuning of blue color temperature

Return NONE NONE Return to the previous menu

Exit NONE NONE Exit from the whole menu

Auto NONE NONE Automatically adjust picture aspect ratio

16:9 NONE NONE Picture in 16:9 mode

Aspect 4:3 NONE NONE Picture in 4:3 mode

Return NONE NONE Return to the previous menu

Exit NONE NONE Exit from the whole menu

VGA (analog) signal input (this needs the support
VGA NONE NONE of the monitor)
DVI (digital) signal input (this needs the support
DVI NONE NONE of the monitor)
HDMI (digital) signal input(this needs the support
HDMI NONE NONE of the monitor)
Input
DP Display port (digital) signal input(this needs the support
NONE NONE of the monitor)
Return NONE NONE Return to the previous menu

Exit NONE NONE Exit from the whole menu

Auto Automatically adjust the horizontal/vertical location,

NONE NONE
adjust focusing and clock of pictures

Auto color NONE NONE Adjust the white balance of pictures

Adjust Gamma1 Adjust color tone brightness grey 1

Gamma2 Adjust color tone brightness grey 2

Gamma
Return Return to the previous menu

Exit Exit from the whole menu

7 All specifications and informations are subject to change without notice.

 English English English

Deutsch Deutsch Deutsch

Español Español Español

한국어 한국어 한국어

Language
日本語 日本語 日本語

Русский Русский Русский

Return Return to the previous menu

Exit Exit from the whole menu

Automatically turn off after saving power for

On ON 1minute

Off Inactivate the function of timed switch-off

Power
Off Return to the previous menu
Return

Exit Exit from the whole menu

YES Reset to factory setup

NO Exit from this function

Reset
Other Return Return to the previous menu

Exit Exit from the whole menu

Adjust the picture clock to reduce vertical line noise

Clock 0 50 100 (only for vga signals)
Adjust the picture phase to reduce horizontal noise
Phase 0 50 100 (only for vga signals)

On ON Activate OD function

Off Inactivate OD function

Over
driver
Return Return to the previous menu

Exit Exit from the whole menu

Activate FreeSync function,Only support AMD display (this

On ON
needs the support of the monitor)
Inactivate FreeSync function (this needs the support
Off
of the monitor)
FreeSync
Return Return to the previous menu

Exit Exit from the whole menu

Sound NONE NONE Adjusting the sound size (only with audio)

Return NONE NONE Return to the previous menu

Exit NONE NONE Exit from the whole menu

Exit NONE NONE NONE NONE Exit from the whole menu

Note: The functions may be adjusted due to specific model or the upgrade of software version.
The physical model shall govern.

All specifications and informations are subject to change without notice. 8

VI. FAQ

Faults occurring Possible solutions

The power indicator ◆ Check if the power is on.

light is not on ◆ Check if the power cord is connected.

◆ Check if the function of plug-and-play of the device

is compatible with PC.
Impossible plug-and-play ◆ Check if the display card is compatible with the
plug-and-play function.
◆ Check if the signal line 15 pin d joint bent

Dimming picture ◆ Adjust brightness and contrast.

Flickering picture or ◆ There may be electrical appliances or equipment

picture with ripples with electronic disturbance.
◆ Check if the PC power is on.
◆ Check if the PC display card is inserted properly.
◆ Check if the signal cable of the monitor is correctly
The power indicator
connected with the PC.
light is on (flickering),
◆ Check the signal cable plug of the monitor and make
but the monitor has no
sure every pin has no bending.
pictures.
◆ Observe the indicator light by pressing the Caps
Lock key on the PC keyboard and check if the PC
is working.
Color shortage ◆ Check the signal cable of the monitor and make
(red, green and blue) sure every pin has no bending.
The picture is not in the
◆ Hot key(AUTO)
middle, or the size is not right

Picture with color difference

◆ Adjust RGB color or reselect color temperature.
(white looks not white)

Screen font blur under

◆ Select the "E" to automatically adjust the image.
VGA signal

Screen color error under ◆ Select “Auto color" in OSD to correct under the
VGA signal white output screen.

9 All specifications and informations are subject to change without notice.

VI. Product Specifications

Diagonal Picture Picture dimensions Optimal

Dot distance (mm)
dimensions aspect ratio (mm) resolution
68.6cm
(27"FHD) 16:9 597.9x336.3 0.311x0.311 1920x1080
80.0cm
(31.5"QHD) 16:9 697.3x392.3 0.272x0.272 2560x1440
80.0cm
(31.5"UHD) 16:9 697.344x392.2344 0.18159x0.18159 3840x2160

Storage temperature -20℃ to 60℃

Ambient
temperature Working temperature 0℃ to 40℃
Humidity RH for operation 20% to 80%

Remark: When the resolution are 2560*1440@60Hz/3440*1440@60Hz/

1920*1080@144Hz/2560*1440@144Hz/3840*2160@30Hz connection via DVI
port, pls choose 24+1 pin double - channel DVI cables.

Note: The actual application of the above parameters shall be subject to the
specific model.

VIII. Table of Product Preset Modes

27"FHD 720x400 640x480 800x600 1024x768 1280x1024 1440x900 1680x1050 1920x1080

( VGA ) (70Hz) (60/72/75Hz) (56/60/72/75Hz) (60/70/75Hz) (60/75Hz) (60Hz) (60Hz) (60Hz)

27"FHD 720x400 640x480 800x600 1024x768 1280x1024 1440x900 1680x1050 1920x1080

( HDMI ) (70Hz) (60/72/75Hz) (56/60/72/75Hz) (60/70/75Hz) (60/75/120Hz) (60/120Hz) (60/120Hz) (60/144Hz)

27"FHD 720x400 640x480 800x600 1024x768 1280x1024 1440x900 1680x1050 1920x1080

( DP ) (70Hz) (60/72/75Hz) (56/60/72/75Hz) (60/70/75Hz) (60/75/120Hz) (60/120Hz) (60/120Hz) (60/144Hz)

31.5"QHD 720x400 640x480 800x600 1024x768 1280x1024 1440x900 1680x1050 1920x1080 2560x1440
(HDMI 1.4) (70Hz) (60/72/75Hz) (56/60/72/75Hz) (60/70/75Hz) (60/75/120Hz) (60/120Hz) (60/120Hz) (60/120/144Hz) (60Hz)

31.5"QHD 720x400 640x480 800x600 1024x768 1280x1024 1440x900 1680x1050 1920x1080 2560x1440
(HDMI 2.0) (70Hz) (60/72/75Hz) (56/60/72/75Hz) (60/70/75Hz) (60/75/120Hz) (60/120Hz) (60/120Hz) (60/144Hz) (60/120/144Hz)

31.5"QHD 720x400 640x480 800x600 1024x768 1280x1024 1440x900 1680X1050 1920x1080 2560x1440
( DP ) (70Hz) (60/72/75Hz) (56/60/72/75Hz) (60/70/75Hz) (60/75Hz) (60Hz) (60Hz) (60/120/144Hz) (60/120/144Hz)

31.5"UHD
( DP )

Note: The actual application of the above parameters shall be subject to the
specific model.

All specifications and informations are subject to change without notice. 10