GL_3034
GL_3034
GL 3034
Lid
Viewing Window
Kneading Blade
Control Panel
Bread Pan
Housing
Measuring Cup
CONTROL PANEL
1. Basic 7. Jam
2. Whole Wheat 8. Dough
3. French 9. Ultra Fast
Measuring Spoon 4.
5.
Quick
Sweet
10. Bake
11. Desert
6. Cake 12. Home Made
time light
loaf color
start
menu stop
Menu
It is used to select different programs. Each time it is pressed (accompanied by a short beep) the selected program
change.
Programs:
1. Basic: kneading, rise and baking normal bread. You may also add ingredients to increase flavor.
2. Whole Wheat: kneading, rise and baking of whole wheat bread. It is not advised to use the delay function as this
can produce poor results.
3. French: kneading, rise and baking with a longer rise time. The bread baked in this menu will have a crisper crust
and loose texture.
4. Quick: kneading, rise and baking loaf within the time less than Basic bread. But the bread baked on this setting is
usually smaller with a dense texture.
5. Sweet: kneading, rise and baking sweet bread. You may also add ingredients to add flavor.
6. Cake: kneading, rise and baking, but rise with soda or baking powder.
7. Jam: boiling jams and marmalades. Fruit or vegetables must be chopped before putting it into the bread pan.
8. Dough: kneading and rise, but without baking. Remove the dough and use for making bread rolls, pizza, steamed
bread, etc.
9. Ultra Fast: kneading, rise and baking loaf in a short time, bread with a dense texture.
10. Bake: only baking, no kneading and rise. Also used for increasing the baking time on selected settings.
11. Dessert: kneading, rise and baking dessert.
12. Home Made: Can be self-programmed by customer, to reset kneading, rise, baking & keep warm.
Under the menu of Home Made:
• Press CYCLE button once, KNEAD1 will appear on LCD, then press TIME button to adjust the minutes, and
press CYCLE to confirm the time for this step;
• Press CYCLE to enter the next step, RISE1 will appear on LCD, then press TIME button to adjust the inutes,
the number will increase rapidly if TIME button is holding. Further press CYCLE to confirm.
• In this way set the remaining steps. Upon finishing setting for all steps, press Start/stop button to exit the
setting.
• Press Start/Stop button further to activate the operation.
The time range of each program:
• KNEAD1: 6-14 minutes • RISE1: 20-60 minutes
• KNEAD2: 5-20 minutes • RISE2: 5-120 minutes
• RISE3: 0-120 minutes • BAKE: 0-80 minutes
• KEEP WARM: 0-60 minutes
Start/Stop
To start a program, press the “START/STOP” button for approx. 1.5 seconds. A short beep will be heard and the two
dots in the time display begin to flash and the program starts. Any other button is inactivated except the START/STOP,
LIGHT, and PAUSE buttons after a program has begun.
To stop the program, press the “START/STOP” button for approx. 1.5 seconds, then a beep will be heard, it means that
the program has been switched off.
Loaf
Press this button to select the size of the bread. Please note the total operation time may vary with the different loaf
size.
Time
If you want that the appliance should not start working immediately, you can use the button to set the delay time.
The step of set delay function is as follows:
• Select your menu, color, loaf size.
• Set the delay time by pressing TIME button. The delay time should include the operation time of chose menu.
Suppose it is 8:30 pm now and you want the bread to be ready to serve at 7:00 am of next day, so the delay
time should be 10 hours and 30 minutes. Press TIME button continuously until 10:30 appear on the display. The
increment of each press is 10 minutes.
• Press the STOP/START button to activate this delay program. You can see the dot flashed and LCD will count
down to show the remaining time.
Please note the maximum delay time is 13 hours. And do not use any perishable ingredients such as eggs, fresh
milk, fruits, onions in the delayed menu.
Pause
After procedure starts up, you can press PAUSE button to interrupt at any time, the operation will be paused but the
setting will be memorized, the outstanding time will be flashed on the LCD. Press PAUSE button again, the program
will continue.
Light
Press the button once, the lighting lamp will be illuminated to expediently view the operation. Within 1minutes, if you
press the button again, the lighting lamp will be extinguished. After 1 minute, don’t need press the button, the lamp
will be extinguished automatically.
KEEP WARM
Bread can be automatically kept warm for 1 hour after baking. During keeping warm, if you would like to take the
bread out, switch the program off by pressing the START/STOP button.
MEMORY
If the power supply has been interrupted during the course of making bread, the process of making bread will be
continued automatically within 10 minutes, even without pressing “START/STOP” button. If the interruption time exceeds
10 minutes, the memory cannot be kept, you must discard the ingredients in the bread pan and add the ingredients into
bread pan again, and the bread maker must be restarted. But if the dough has not entered the rising phase when the
power supply breaks off, you can press the “START/STOP” directly to continue the program from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperature, but there may be difference in loaf size between a very
warm room and a very cold room. We suggest that the room temperature should be within temperature of 15 to 34.
WARNING DISPLAY
• If the display shows “H HH” after you have pressed START/STOP button, the temperature inside is still too high.
Then the program has to be stopped. Open the lid and let the machine cool down for 10 to 20 minutes.
• If the display shows “E E0” or “E E1”after you have pressed START/STOP button, the temperature sensor is
malfunction please check the sensor carefully by Authorized expert.
Ye a st o r so d a
酵 母 或苏 打
Dry 配料
干的 ing red ie nts
Wa te
水或 液体r o r liq uid
• Make a small indentation on the top of flour with finger, add yeast into the indentation, make sure it does not
come into contact with the liquid or salt.
• Close the lid gently and plug the power cord into a wall outlet.
• Press the Menu button until your desired program is selected.
• Press the COLOR button to select the desired crust color.
• Press the LOAF button to select the desired size. (700g or 1000g)
• Set the delay time by pressing Time button. This step may be skipped if you want the bread maker to start working
immediately.
• Press the START/STOP button for approx. 1.5 seconds to start working.
• For the program of BASIC, WHOLE WHEAT, FRENCH, QUICK, SWEET, CAKE, ULTRA-FAST and HOME-MADE
beeps sound will be heard during operation.
This is to prompt you to add ingredients. Open the Lid and put in some ingredients. It is possible that steam will
escape through the vent in the lid during baking. This is normal.
• Once the process has been completed, 10 beeps will be heard. You can press START/STOP button for approx. 1.5
seconds to stop the process and take out the bread. Open the Lid and while using oven mitts, turn the bread pan
in anti-clockwise and take out the bread pan.
• Let the bread pan cool down before removing the bread. Then use non-stick spatula to gently loosen the sides of
the bread from the pan.
• Turn bread pan upside down onto a wire cooling rack or clean cooking surface and gently shake until bread falls
out.
• Let the bread cool for about 20 minutes before slicing. It is recommended to slice the bread with electric cutter or
dentate cutter and not with fruit knife or kitchen knife, otherwise the bread may be subject to deformation.
SPECIAL INTRODUCTION
For Quick program
• With Quick program, the bread maker can finish making a loaf within shorter period with baking powder or soda
in place of yeast. To obtain perfect quick bread, it is suggested that all liquid ingredients shall be placed at the
bottom of the bread pan and dry ingredients on the top, but during the initial kneading, some dry ingredients may
collect in the corners of the pan, so in order to avoid flour clumps, you may use a rubber spatula to help to knead
dough.
Cake powder
• Cake powder, which is ground from soft wheat or low-protein wheat, is specially used for making cake.
Sugar
• Sugar is very important for crust color and flavor of bread. It also helps to ferment bread as nutriment. Usually
white sugar is used in most cases. Brown sugar, powder sugar or cotton sugar may be used for special purpose.
Yeast
• The purpose of yeast is to ferment dough by producing carbon dioxide which can expand bread and then soften
inner fiber texture, however, fast breeding of yeast needs carbohydrate in sugar and flour as nutriment. Usually
there are three types of yeast: fresh yeast, active dry yeast and instant yeast, wherein instant yeast is used more
frequently, traditional active dry yeast may be used to obtain better fermentation effect, but instant yeast operates
faster than active dry yeast. Conversion relation between instant yeast and active dry yeast is as follows:
1tsp. active dry yeast =3/4 tsp. instant yeast
1.5tsp. active dry yeast =1 tsp. instant yeast
2tsp. active dry yeast =1.5 tsp. instant yeast
Moreover, yeast shall be stored in refrigerator as it may be killed at high temperature, before using, ensure the
yeast is fresh by checking the expiry date of yeast. Store it back to the refrigerator as soon as possible after each
use. Usually bread or dough, which fails to rise, is due to stale yeast being used.
The ways described below will check whether your yeast is fresh and active or not.
• Pour 1/2 cup warm water (45-500C) into a measuring cup
• Add 1 tsp. white sugar into the cup and stir, then sprinkle 2tsp. yeast over the water.
• Put the measuring cup in a warm place for about 10min. Do not stir the water.
• The froth generated by yeast shall come up to 1-cup mark, otherwise the yeast may be stale or inactive.
Salt
• Salt is necessary to improve bread flavor and crust color. But too much salt can also restrain yeast from rising.
Never use too much salt in a recipe. But too little lets the dough rise so fast it may fall before baking is complete.
It also keeps bread from getting stale too quickly.
Egg
• Eggs add richness and a soft texture to bread dough and cake.
Baking powder
• Baking powder is a raising agent mainly used in making the Ultra Fast bread and cake. It does not require
fermentation time before baking as the chemical reaction works during baking process.
Soda
• The same as above, it can also be used in combination with baking powder.
INGREDIENT MEASUREMENT
One most important step for making good bread is to measure ingredients accurately. It is strongly suggested using
measuring cup or measuring spoon to obtain accurate measurement, otherwise the bread will be largely influenced.
Add-ingredient sequence
• Usually ingredients shall be added according to the following sequence: liquid ingredients, eggs, salt and milk
powder etc. When adding flour, it shall not be contacted by liquids completely and the yeast shall be placed on
the dry flour. Pay special attention that yeast must not contact with salt. If the machine is provided with auto add-
ingredient function, fruit ingredients shall be added only after beep sound is heard to prompt you. In addition,
when you use “ long-time” delay function, never add the perishable ingredients such as eggs or fruit ingredients.
IMPORTANT SAFEGUARDS:
Before using the electrical appliance, the following basic precautions should always be followed:
• Read all instructions
• Before use, check that the voltage of wall outlet corresponds to the one shown on the rating plate.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped
or damaged in any manner. Return the appliance to manufacturer or the nearest authorized service agent for
examination, repair, electrical or mechanical adjustment.
• Do not press hot surfaces. Use handles or knobs. As the handle is close to metallic decorative sheets, it is
recommended to open the lid with gloves or away from the metallic decorative sheets or when cooling down in
order to avoid a risk of scald.
• To protect against electric shock do not immerse cord, plugs, or housing in water or other liquid.
Specifications
Input Voltage : 230 V AC / 50 Hz Packing List
Power Consumption : 615 W Basic Unit, Measuring Cup, Measuring Spoon, Hook,
Capacity : 700 G - 1000 G User’s Guide