J250K

Engine ref. 6068HFS55-228

Alternator ref. AT01180T
Performance class G2

GENERAL CHARACTERISTICS
Frequency (Hz) 50 Hz
Voltage (V) 400/230
Standard Control Panel APM303
Optional control panel TELYS
Optional control panel
Optional control panel

POWER
ESP PRP
Voltage Standby Amps
kWe kVA kWe kVA

DESCRIPTIVE 415/240 200 250 182 227 348

Electronic governor 400/230 200 250 182 227 361
Mechanically welded chassis with antivibration 380/220 200 250 182 227 380
suspension
200/115 200 250 182 227 722
Main line circuit breaker
Radiator for core temperature of 48/50°C max with
240 TRI 200 250 182 227 601
mechanical fan 230 TRI 200 250 182 227 628
Protective grille for fan and rotating parts (CE option) 220 TRI 200 250 182 227 656
9 dB(A) silencer supplied separately
Charger DC starting battery with electrolyte
DIMENSIONS COMPACT VERSION
12 V charge alternator and starter
Length (mm) 2398
Delivered with oil and coolant -30°C
Manual for use and installation Width (mm) 1114
Height (mm) 1535
Dry weight (kg) 1800
Tank capacity (L) 340

DIMENSIONS SOUNDPROOFED VERSION

POWER DEFINITION
Type soundproofing M226
PRP : Prime Power is available for an unlimited number of annual
operating hours in variable load applications, in accordance with ISO Length (mm) 3508
8528-1. ESP : The standby power rating is applicable for supplying
emergency power in variable load applications in accordance with ISO Width (mm) 1200
8528-1. Overload is not allowed.
Height (mm) 1830
TERMS OF USE
Dry weight (kg) 2400
According to the standard, the nominal power assigned by the genset is
given for 25°C Air Intlet Temperature, of a barometric pressure of 100 Tank capacity (L) 340
kPA (100 m A.S.L), and 30 % relative humidity. For particular conditions
in your installation, refer to the derating table. Acoustic pressure level @1m in dB(A) 82
ASSOCIATED UNCERTAINTY Sound power level guaranteed (Lwa) 101
For the generating sets used indoor, where the acoustic pressure levels
depends on the installation conditions, it is not possible to specify the Acoustic pressure level @7m in dB(A) 71
ambient noise level in the exploitation and maintenance instructions .
You will also find in our exploitation and maintenance instructions a
warning concerning the air noise dangers and the need to implement
appropriated preventive measures.

28/11/2016
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J250K
ENGINE CHARACTERISTICS

GENERAL ENGINE DATA EXHAUST

Engine brand JOHN DEERE Exhaust gas temperature @ ESP 50Hz (°C) 530
Engine ref. 6068HFS55-228 Exhaust gas flow @ ESP 50 Hz (L/s) 577
Air inlet system Turbo Max. exhaust back pressure (mm H2O) 750
Cylinders configuration L
Number of cylinders 6 FUEL
Displacement (L) 6,72 Consumption @ 110% load (L/h) 51,40
Charge Air coolant Air/Water DC Consumption @ 100% load (L/h) 47,10
Bore (mm) x Stroke (mm) 106 x 127 Consumption @ 75% load (L/h) 35,90
Compression ratio 17 : 1 Consumption @ 50% load (L/h) 24,40
Speed (RPM) 1500 Maximum fuel pump flow (L/h)
Pistons speed (m/s) 6,35
Maximum stand-by power at rated
228
RPM (kW) OIL
Frequency regulation, steady state (%) +/- 0.5% Oil capacity (L) 32,50
BMEP (bar) 24,68 Min. oil pressure (bar)
Governor type Electronic Max. oil pressure (bar)
Oil consumption 100% ESP (L/h)
COOLING SYSTEM Oil sump capacity (L)
Radiator & Engine capacity (L) 27,70
HEAT BALANCE
Heat rejection to exhaust (kW) 151
Fan power (kW) 3,40 Radiated heat to ambiant (kW) 23
Fan air flow w/o restriction (m3/s) 3,80 Haet rejection to coolant HT (kW) 88
Available restriction on air flow (mm
25
H2O)
Type of coolant Glycol-Ethylene AIR INTAKE
Max. intake restriction (mm H2O) 375
Intake air flow (L/s)

EMISSIONS
Emission PM (g/kW.h) 0,05
Emission CO (g/kW.h)
Emission HC+NOx (g/kWh) 8,02
Emission HC (mg/Nm3) 5% O2

28/11/2016
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J250K
ALTERNATOR CHARACTERISTICS

GENERAL DATA OTHER DATA

Alternator ref. AT01180T Continuous Nominal Rating 40°C (kVA) 225
Number of Phase Three phase Standby Rating 27°C (kVA) 250
Power factor (Cos Phi) 0,80 Efficiencies 100% of load (%) 93
Altitude (m) 0 à 1000 Air flow (m3/s) 0,5330
Overspeed (rpm) 2250 Short circuit ratio (Kcc) 0,45
Number of pole 4 Direct axis synchro reactance unsaturated (Xd) (%) 198,70
Capacity for maintaining short circuit at Quadra axis synchro reactance unsaturated (Xq) (%) 109,70
Yes
3 ln for 10 s
Open circuit time constant (T'do) (ms) 1100
Insulation class H
Direct axis transcient reactance saturated (X'd) (%) 10,50
T° class (H/125°), continuous 40°C H / 125°K
Short circuit transcient time constant (T'd) (ms) 83
T° class (H/163°C), standby 27°C H / 163°K
Direct axis subtranscient reactance saturated (X''d)
Total Harmonic Distortion in no-load 5,60
2,6 (%)
DHT (%)
Subtranscient time constant (T"d) (ms) 13
AVR Regulation Yes
Quadra axis subtranscient reactance saturated (X"q)
Total Harmonic Distortion, on load DHT 19,10
2,8 (%)
(%)
Subtranscient time constant (T"q) (ms) 23
Wave form : NEMA=TIF <40
Zero sequence reactance unsaturated (Xo) (%) 2,69
Wave form : CEI=FHT <2
Negative sequence reactance saturated (X2) (%) 13,20
Number of bearing 1
Armature time constant (Ta) (ms) 18
Coupling Direct
No load excitation current (io) (A) 0,67
Voltage regulation at established rating
1 Full load excitation current (ic) (A) 3
(+/- %)
Recovery time (Delta U = 20% 200 Full load excitation voltage (uc) (V) 47,10
transcient) (ms)
Engine start (Delta U = 20% perm. or 50% trans.)
Indication of protection IP 23 155
(kVA)
Technology Without collar or Transcient dip (4/4 load) - PF : 0,8 AR (%) 13,90
brush
No load losses (W) 3100
Heat rejection (W) 13548
Unbalanced load acceptance ratio (%) 100

DIMENSIONS

Type soundproofing M226 Type soundproofing

Length (mm) 3508 Length (mm) 3560
Width (mm) 1200 Width (mm) 1180
Height (mm) 1830 Height (mm) 1890
Dry weight (kg) 2400 Dry weight (kg) 2140
Tank capacity (L) 340 Tank capacity (L) 868
Acoustic pressure level @1m in dB(A) 82 Acoustic pressure level @1m in dB(A)
Sound power level guaranteed (Lwa) 101 Sound power level guaranteed (Lwa)
Acoustic pressure level @7m in dB(A) 71 Acoustic pressure level @7m in dB(A)

Type soundproofing M226 DW Type soundproofing M226 DW48

Length (mm) 3560 Length (mm) 3560
Width (mm) 1200 Width (mm) 1200
Height (mm) 2182 Height (mm) 2364
Dry weight (kg) 2740 %PdnetE_5% 2800
Tank capacity (L) 868 Tank capacity (L) 1630
Acoustic pressure level @1m in dB(A) 82 Acoustic pressure level @1m in dB(A) 82

28/11/2016
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 Sound power level guaranteed (Lwa) 101 Sound power level guaranteed (Lwa) 101
Acoustic pressure level @7m in dB(A) 71 Acoustic pressure level @7m in dB(A) 71

28/11/2016
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J250K
CONTROL PANEL

APM303, comprehensive and simple TELYS, ergonomic and user-friendly

The highly versatile TELYS control unit is complex yet

accessible, thanks to the particular attention paid to
optimising its ergonomics and ease of use. With its large
display screen, buttons and scroll wheel, it places the
accent on simplicity and communication.
The APM303 is a versatile unit which can be operated in
manual or automatic mode. It offers the following features: The TELYS offers the following functions:
Measurements:
phase-to-neutral and phase-to-phase voltages, fuel level Electrical measurements: voltmeter, frequency meter,
(In option : active power currents, effective power, power ammeter.
factors, Kw/h energy meter, oil pressure and coolant
temperature levels) Engine parameters: working hours counter, oil pressure,
Supervision: coolant temperature, fuel level, engine speed, battery
Modbus RTU communication on RS485 voltage.
Reports:
(In option : 2 configurable reports) Alarms and faults: oil pressure, coolant temperature, failure
Safety features: to start, overspeed, alternator min./max., battery voltage
Overspeed, oil pressure,coolant temperatures, minimum min./max., emergency stop, fuel level.
and maximum voltage, minimum and maximum frequency
(Maximum active power P<66kVA) Ergonomics: wheel for navigating around the various
Traceability: menus.
Stack of 12 stored events
For further information, please refer to the data sheet for the Communication: remote control and operation software,
APM303. USB connections, PC connection.

For more information on the product and its options, please

refer to the sales documentation.

28/11/2016
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 Basic terminal block Basic terminal block

The control unit can be used as a basic terminal block for The control unit can be used as a basic terminal block for
connecting a control box. connecting a control box.

Offers the following functions: Offers the following functions:

emergency stop button, customer connection terminal emergency stop button, customer connection terminal
block, CE. block, CE.

28/11/2016
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.