Scribd
Upload
3 views

Tutorial 1

steel design

Uploaded by

Nithish Reddy
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3 views

Tutorial 1

steel design

Uploaded by

Nithish Reddy
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

INDIAN INSTITUTE OF TECHNOLOGY TIRUPATI

CE301L BASIC STRUCTURAL STEEL DESIGN

Tutorial: 1 Name:
Topic: Steel as a material and Limit state design Roll number:

1. The Hot rolled structural steel shall conform to


(a) IS 226 (b)IS 800 (c)IS 1997 (d)IS 2062
2. The Percentage of carbon in structural steel
(a) 0.23% (b) 0.6% (c) 0.5% (d) 1.5%
3. Poisson’s ratio of the structural steel is
(a) 0.25 (b) 0.3 (c) 0.35 (d) 0.40
4. The necking of the steel section during tensile test takes place at
(a) At yield stress (b) In strain hardening range

(c)At plastic yielding (d) After reaching ultimate stress

5. The ratio of Young’s modulus to rigidity modulus of standard structural steel is


(a) 1.5 (b) 2.6 (c) 3.5 (d) 5
6. Mention the sequence of points that mild steel material undergoes failure by referring to the stress
strain diagram
(a) Yielding, Elastic deformation, Necking, Strain Hardening, Fracture
(b) Yielding, Elastic deformation, Strain Hardening, Necking, Fracture
(c) Elastic deformation, Yielding, Strain Hardening, Necking, Fracture
(d) Elastic deformation, Strain Hardening, Yielding, Necking, Fracture
7. With a percentage increase of carbon in steel, decreases
(a) Hardness (b) Ductility (c) Brittleness (d) Strength
8. Which of the following load combination is not possible
(a) DL+LL (b) DL+LL+EL (c)DL+WL+EL (d) DL+LL+WL
9. The Partial Safety factor for resistance governed by yielding and ultimate strength are
(a) 1.0,1.0 (b) 1.25,1.0 (c) 1.0,1.25 (d) 1.25,1.25
10. Roof design loads include a dead load of 1.6 kN/m 2 , Live load of 1.15 kN/m2, and a Wind pressure
of 0.70 kN/m2 ,(upwards and downwards). Determine the governing loading.

You might also like