2016 Cat Hand Tools and Shop Supplies

®
2016 Cat Hand Tools and
®

https://dealer.cat.com/en/ps/parts/parts-mktg/st-hardware-supplies.html Shop Supplies

PECJ0003-07
www.cat.com
© 2016 Caterpillar, All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow” and the “Power Edge“ trade dress,
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

PECJ0003-06 cover 2015 gradient edit.indd 1 1/12/2016 8:49:38 AM

 Table of Contents

Section Page

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
H a n d To o l s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tool Sets — Hand Tool Sets ................................................................................................................................12
Tool Sets — Field Tool Sets ................................................................................................................................26
Wrenches — Cat® Standard Wrenches.................................................................................................................28
Wrenches — Cat Ratcheting Wrenches ................................................................................................................33
Wrenches — Angle Wrenches ............................................................................................................................37
Wrenches — Adjustable Wrenches .....................................................................................................................39
Wrenches — Pipe Wrenches ..............................................................................................................................40
Wrenches — Chain Wrenches ............................................................................................................................42
Wrenches — Filter Wrenches .............................................................................................................................43
Wrenches — Hex Wrenches...............................................................................................................................44
Wrenches — Special Application Wrenches .........................................................................................................48
Wrenches — Crowfoot Wrenches........................................................................................................................52
Ratchets and Sockets — Ratchet and Socket Sets ..................................................................................................55
Ratchets and Sockets — Ratchets and Repair Kits..................................................................................................60
Ratchets and Sockets — Ratchet Handles and Breaker Bars ....................................................................................62
Ratchets and Sockets — Cat Sockets - 3/8 inch Drive..............................................................................................64
Ratchets and Sockets — Cat Sockets - 1/4 inch Drive..............................................................................................68
Ratchets and Sockets — Cat Sockets - 1/2 inch Drive..............................................................................................70
Ratchets and Sockets — Impact Socket Sets - 3/8 inch Drive ...................................................................................73
Ratchets and Sockets — Impact Socket Sets - 1/2 in Square Drive ............................................................................77
Ratchets and Sockets — Impact Socket Sets - 3/4 in Square Drive ............................................................................80
Universal and Swivel Socket Sets - 3/8 inch Square Drive........................................................................................81
Universal and Swivel Socket Sets - 1/2 inch Drive ..................................................................................................83
Ratchets and Sockets — Twist Sockets - 3/8 inch Square Drive ................................................................................85
Ratchets and Sockets — Individual Sockets ..........................................................................................................86
Ratchets and Sockets — Special Application Sockets........................................................................................... 106
Ratchets and Sockets — Extensions/Adapters ..................................................................................................... 113
Cordless Power Tools ...................................................................................................................................... 116
Pneumatic Tools — Impact Wrenches ................................................................................................................ 118
Pneumatic Tools — Sanders and Polishers.......................................................................................................... 123
Pneumatic Tools — Grinders............................................................................................................................. 125
Pneumatic Tools — Drills................................................................................................................................. 126
Pneumatic Tools — Air Hammers....................................................................................................................... 127
Pneumatic Tools — Ratchet .............................................................................................................................. 128
Pneumatic Tools — Shears............................................................................................................................... 129
Pneumatic Tools — Engraver ............................................................................................................................ 130
Pneumatic Tools — Air Guns ............................................................................................................................ 131
Pneumatic Tools — Spray Guns......................................................................................................................... 134
Torque Tools — Torque Wrenches, Adapters, and Extensions.................................................................................. 136
Torque Tools — Torque Testers.......................................................................................................................... 141
Grease Guns .................................................................................................................................................. 143
Cat Screwdrivers ............................................................................................................................................ 147
Cat Pliers ...................................................................................................................................................... 151
Hammers and Slide Sledges ............................................................................................................................. 155
Chisels and Punches ....................................................................................................................................... 160
Pry Bars ........................................................................................................................................................ 162
Miscellaneous Hand Tools — Knives, Saws and Cutting Tools ................................................................................ 164
Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges ......................................................................... 171
Miscellaneous Hand Tools — Seal Picks ............................................................................................................ 177
Miscellaneous Hand Tools — Brushes................................................................................................................ 178

1
 Table of Contents

Miscellaneous Hand Tools — Miscellaneous ...................................................................................................... 181

Tool Boxes..................................................................................................................................................... 185
Shop Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Abrasives — Brushes ...................................................................................................................................... 206
Abrasives — Discs.......................................................................................................................................... 209
Abrasives — Wheels....................................................................................................................................... 221
Abrasives — Miscellaneous ............................................................................................................................. 232
Metal Cutting — Drill Bits ................................................................................................................................ 243
Metal Cutting — Taps and Dies ......................................................................................................................... 249
Metal Cutting — Extractors .............................................................................................................................. 258
Metal Cutting — Cutting Torch Equipment ........................................................................................................... 263
Metal Cutting — Miscellaneous ........................................................................................................................ 264
Metal Repair .................................................................................................................................................. 265
Caps and Plugs............................................................................................................................................... 281
Vises ............................................................................................................................................................ 294
Battery Service Equipment................................................................................................................................ 298
Lighting and Electrical Products — Flashlights and Batteries ................................................................................. 307
Lighting and Electrical Products — Work Lights and Extension Cords ...................................................................... 312
Lighting and Electrical Products — Miscellaneous ............................................................................................... 318
Personal Protective Equipment — Gloves............................................................................................................ 323
Personal Protective Equipment — Safety Vests .................................................................................................... 337
Personal Protective Equipment — Eye Protection ................................................................................................. 338
Personal Protective Equipment — Hearing Protection ........................................................................................... 348
Personal Protective Equipment — Hard Hats ....................................................................................................... 351
Personal Protective Equipment — Breathing Protection......................................................................................... 352
Personal Protective Equipment — First Aid Kits ................................................................................................... 354
Personal Protective Equipment — Welding Protection .......................................................................................... 358
Contamination Control ..................................................................................................................................... 360
Fluid Sampling Equipment ................................................................................................................................ 363
Towels and Wipers ......................................................................................................................................... 368
Absorbents and Spill Kits — Absorbents ............................................................................................................. 373
Absorbents and Spill Kits — Spill Kits ................................................................................................................ 379
Floor Mats ..................................................................................................................................................... 383
Tape ............................................................................................................................................................. 385
Packing Supplies and Equipment ....................................................................................................................... 391
Miscellaneous — Padlocks .............................................................................................................................. 398
Miscellaneous — Ladders................................................................................................................................ 400
Miscellaneous — Janitorial Products ................................................................................................................ 401
Miscellaneous — Highway Warning Kit ............................................................................................................. 403
Miscellaneous — Sprayers .............................................................................................................................. 404
Miscellaneous — Miscellaneous Products ......................................................................................................... 405
Paint — Cat Paint ........................................................................................................................................... 412
Paints — Paint Thinner .................................................................................................................................... 414
Maintenance Chemicals — Soaps and Cleaners................................................................................................... 415
Maintenance Chemicals — Adhesives and Sealants ............................................................................................. 421
Maintenance Chemicals — Lubricants ............................................................................................................... 423
Maintenance Chemicals — Metal Working ......................................................................................................... 426
Maintenance Chemicals — Testing Products ....................................................................................................... 427
Maintenance Chemicals — Rust Preventatives .................................................................................................... 431
Maintenance Chemicals — Miscellaneous Chemicals .......................................................................................... 432
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435

2
 Introduction
Hand Tools and Shop Supplies
The Hand Tools and Shop Supplies catalog incorporates all of the shop supplies, general purpose hand tools, tool
boxes, and personal safety items for dealer and customer service shops.

Ordering Procedure
Most products listed in PECJ0003 are stocked at Cat parts facilities. All products in PECJ0003 can be ordered
through the Cat Parts Distribution system using existing stock or emergency ordering procedures.
Prices
Prices are subject to change without notice. Standard dealer payment terms apply for any product ordered from this
catalog (whether it is stocked or direct shipped).
Warranty Claims Process
Customers:
In the event that a warranty claim needs to be filed, contact your Cat dealer.
Dealers:
The products offered in this catalog are covered by the standard six-month Caterpillar warranty unless they are cov-
ered by a manufacturer warranty. Where possible, the warranty type is listed in the product details. The most up-to-
date information on warranty type and length is available in the Cat Dealer Numerical Parts Record (NPR) system.
For more warranty information and a sample claims form, visit dealer.cat.com/toolsandsupplies.
Questions Customers:
Contact your local Cat Dealer with any questions you may have about the products listed in this catalog.
Questions Dealers:
For more information about any of the products listed in the catalog contact the Global Dealer Services Network.
Global Dealer Services Network
Parts Technical Support Team
North America: 1 (877) 228-2420
International: 1 (309) 266-4421
Email: [email protected]
Suggest a Product for the Cat Hand Tools and Shop Supplies Catalog
Did you find the product you were looking for? If not, suggest a product at [email protected].

3
 Hand Tools
Tool Sets — Hand Tool Sets.........................................................................................................12
Serviceman's Tool Set, 117 Piece Set - 8T-0460 .........................................................................12
Serviceman's Tool Set, 95 Piece Set - 8T-0461 ...........................................................................15
Student Tool Set - 222-7876 ...................................................................................................18
Hand Tool Set - 211-0616.......................................................................................................19
Hand Tool Set - 211-0617.......................................................................................................20
Hand Tool Set - 214-6153.......................................................................................................20
Hand Tool Set - 214-7318.......................................................................................................21
Hand Tool Set - 214-7219.......................................................................................................22
Hand Tool Set - 157-0674.......................................................................................................23
Hand Tool Set - 207-1515.......................................................................................................24
Hand Tool Set - 256-4816.......................................................................................................24
Tool Sets — Field Tool Sets .........................................................................................................26
Field Tool Set - 133-8877........................................................................................................26
Field Tool Set - 144-4674........................................................................................................26
Field Tool Set - 152-4942........................................................................................................27
Wrenches — Cat® Standard Wrenches .........................................................................................28
Fractional Combination Wrench Set, Standard Length, 11 Piece - 4C-9600 ......................................28
Fractional Short Length Combination Wrench Set, 9 Piece - 4C-9610 .............................................28
Metric Combination Wrench Set, 14 Piece - 1U-5545 ..................................................................29
Metric Combination Wrench Set, 10 Piece - 233-1632 .................................................................30
Fractional Combination Wrenches ..........................................................................................30
Metric Combination Wrenches...............................................................................................31
Metric Combination Wrenches...............................................................................................32
Wrenches — Cat Ratcheting Wrenches.........................................................................................33
Fractional Ratcheting Wrench Set, 8 piece - 248-8810.................................................................33
Ratcheting Box Wrench........................................................................................................33
Fractional Straight Handle Wrench Set, 11 Piece - 8T-3120 ..........................................................33
Fractional Straight Handle Wrench Set, 6 Piece - 8T-3227............................................................34
Metric Ratcheting Wrench Set, 12 piece - 248-8819....................................................................34
Ratchet Wrench - 9U-6517 ....................................................................................................35
Ratcheting Box Flare Wrench, 3/4 inch Square Drive..................................................................36
Wrenches — Angle Wrenches.....................................................................................................37
Angle Wrench Set, 30° and 60° Offset, 14 Piece - 1P-3515 ...........................................................37
Angle Wrench Set, 7 Piece - 233-1635 .....................................................................................37
Angle Wrench Set, Large, 7 Piece - 233-1636 ............................................................................38
Half-Moon Wrench - 194-4935................................................................................................38
Wrenches — Adjustable Wrenches ..............................................................................................39
Heavy-Duty Adjustable End Wrench........................................................................................39
Adjustable Wrenches...........................................................................................................39
Wrenches — Pipe Wrenches.......................................................................................................40
Aluminum Pipe Wrenches .....................................................................................................40
Heavy-Duty Pipe Wrenches...................................................................................................40
48 Inch Pipe Wrench - 386-3304 .............................................................................................40
48 inch Pipe Wrench ............................................................................................................41
60-Inch Pipe Wrench - 423-8977 .............................................................................................41
Wrenches — Chain Wrenches .....................................................................................................42
Chain Wrench for Special Applications - 1U-8760 ......................................................................42
Chain Wrench Group - 3P-1535 ..............................................................................................42
Wrenches — Filter Wrenches......................................................................................................43
Filter Strap Wrench - 185-3630 ...............................................................................................43
Filter Wrench - 187-2718 .......................................................................................................43
Wrenches — Hex Wrenches .......................................................................................................44
Fractional Hex Bit Set, 9 Piece - 9S-1742 ..................................................................................44
Fractional "L" Shaped Hex Key Wrench Set, 13 Piece - 200-1928 ...................................................44
Fractional Hex Key Wrench Set with Ball End, 13 Piece - 293-3025 ................................................44

5
Hand Tools
Metric Hex Bit Set, 7 Piece - 200-1931 .....................................................................................45
Metric "L" Shaped Hex Key Wrench Set, 9 Piece - 200-1929 .........................................................45
Metric Hex Key Wrench Set with Ball End, 9 Piece - 293-3026 ......................................................45
"L" Shaped Torx Wrench T50 - 256-4879....................................................................................45
Hex Key Wrenches, Standard and Metric.................................................................................46
T-Handle Allen Head Wrench Set ...........................................................................................46
Hollow Head Screw Hex Wrenches ........................................................................................47
Wrenches — Special Application Wrenches..................................................................................48
Spark Plug Wrench - 2P-5481 ................................................................................................48
Open End Wrenches ............................................................................................................48
Wrench, 41.0 mm - 214-7329 ..................................................................................................48
Wrench, 55.0 mm - 4C-4065 ...................................................................................................49
Special Open End Wrenches .................................................................................................49
Wrench Set, Double End Flare Nut, 3 Piece - 214-7335 ................................................................49
Individual Offset Wrenches, Double End Flare Nut .....................................................................50
Special Application Wrenches ...............................................................................................50
Saw Adjustment Wrench - 197-3672 ........................................................................................50
Heavy-Duty Box Wrenches ...................................................................................................51
Nut Spanner Wrenches ........................................................................................................51
Slug Wrenches ...................................................................................................................51
Wrenches — Crowfoot Wrenches ................................................................................................52
Fractional Open-End Crowfoot Wrench Group, 9 piece, 3/8 inch Drive - 2P-5520 ..............................52
Fractional Crowfoot Wrench Group, 11 Piece - 5P-0336...............................................................52
15-Piece 1/2-inch Fractional Crowfoot Wrench Set ....................................................................53
Metric Flare Nut Crowfoot Wrench Set - 305-3129......................................................................53
Ratchets and Sockets — Ratchet and Socket Sets...........................................................................55
Fractional Socket Set, 17 Piece, 1/4 inch Drive - 213-4443 ............................................................55
Fractional Socket Set, 11 Piece, 3/8 inch Drive - 9S-1746 .............................................................55
Fractional Socket Set, 16 Piece, 1/2 inch Drive - 9S-1748 .............................................................56
Fractional Socket Set, 21 Piece, 3/4 inch Drive - 9S-1749 .............................................................57
Fractional Heavy-Duty Socket Set, 17 Piece, 1 inch Drive - 5S-6093 ...............................................58
Metric Ratchet Set, 17 Piece, 1/4 inch Drive - 233-1642 ...............................................................59
Ratchets and Sockets — Ratchets and Repair Kits ..........................................................................60
Ratchet Set, 3 Piece - 233-1637 ..............................................................................................60
Ratchets............................................................................................................................60
Ratchet Heads ....................................................................................................................61
Ratchets and Sockets — Ratchet Handles and Breaker Bars .............................................................62
Handles.............................................................................................................................62
Head Breaker Bar, 3/4 inch Drive - 8H-8546 ..............................................................................62
Breaker Bars......................................................................................................................62
Sliding T-Handle..................................................................................................................62
Sliding "T" Wrench Head - 5S-6090 ..........................................................................................63
Speeder Handle, 3/8 inch Drive - 8H-8573 .................................................................................63
Hand Impact Wrench - 5P-2410 ..............................................................................................63
Ratchets and Sockets — Cat Sockets - 3/8 inch Drive ......................................................................64
Fractional Socket Set, 7 Piece, 3/8 inch Drive - 214-1143 .............................................................64
Fractional Socket Set, 9 Piece, 3/8 inch Drive - 214-1151 .............................................................64
Fractional Socket Set, 9 Piece, 3/8 inch Drive - 214-6490 .............................................................65
Metric Socket Set, 12 Piece, 3/8 inch Drive - 194-3574 ................................................................65
Metric Socket Set, 12 Piece, 3/8 inch Drive - 199-9019 ................................................................66
Metric Socket Set, 12 Piece, 3/8 inch Drive - 214-6620 ................................................................66
Metric Socket Set, 8 Piece, 3/8 inch Drive - 214-6634..................................................................67
Ratchets and Sockets — Cat Sockets - 1/4 inch Drive ......................................................................68
Fractional Socket Set, 10 Piece, 1/4 inch Drive - 213-9965 ............................................................68
Metric Socket Set, 13 Piece, 1/4 inch Drive - 200-8413 ................................................................68
Metric Socket Set, 9 Piece, 1/4 inch Drive - 194-3578..................................................................69

6
 Hand Tools
Ratchets and Sockets — Cat Sockets - 1/2 inch Drive ......................................................................70
Fractional Socket Set, 12 Piece, 1/2 inch Drive - 214-6498 ............................................................70
Fractional Deep Well Socket Set, 9 Piece, 1/2 inch Drive - 2P-5490................................................70
Fractional Socket Set, 11 Piece, 1/2 inch Drive - 214-1161 ............................................................71
Metric Socket Set, 13 Piece, 1/2 inch Drive - 199-6156 ................................................................71
Metric Socket Set, 10 Piece, 1/2 inch Drive - 194-3576 ................................................................72
Ratchets and Sockets — Impact Socket Sets - 3/8 inch Drive ............................................................73
Fractional Impact Socket Set, 12 Piece, 3/8 inch Drive - 271-4600..................................................73
Fractional Impact Socket Set, 7 Piece, 3/8 inch Drive - 271-4613 ...................................................73
Fractional Impact Socket Set, 12 Piece, 3/8 inch Drive - 271-4669..................................................74
Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4622 ......................................................74
Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4654 ......................................................75
Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4638 ......................................................75
Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4683 ......................................................76
Ratchets and Sockets — Impact Socket Sets - 1/2 in Square Drive .....................................................77
Fractional Impact Socket Set, 11 Piece 1/2 inch Drive - 213-3086...................................................77
Fractional Impact Socket Set, 12 Piece 1/2 inch Drive - 213-3515...................................................77
Metric Impact Socket Set, 12 Piece 1/2 inch Drive - 213-6923 .......................................................78
Metric Impact Socket Set, 11 Piece 1/2 inch Drive - 214-6643 .......................................................78
Ratchets and Sockets — Impact Socket Sets - 3/4 in Square Drive .....................................................80
Metric Impact Socket Set, 24 Piece 3/4 inch Drive - 9U-6547 ........................................................80
Universal and Swivel Socket Sets - 3/8 inch Square Drive ................................................................81
Fractional Universal Socket Set, 7 Piece, 3/8 inch Drive - 9S-1747 .................................................81
Fractional Universal Socket Set, 7 Piece, 3/8 inch Drive - 261-8581 ................................................81
Metric Universal Socket Set, 9 Piece, 3/8 inch Drive - 9U-6124 .....................................................82
Metric Universal Socket Set, 7 Piece, 3/8 inch Drive - 261-8572 ....................................................82
Universal and Swivel Socket Sets - 1/2 inch Drive...........................................................................83
Fractional Universal Impact Socket Set, 5 Piece, 1/2 inch Drive - 214-6518......................................83
Fractional Universal Impact Socket Set, 14 Piece, 1/2 inch Drive - 246-8184 ....................................83
Metric Universal Impact Socket Set, 10 Piece, 1/2 inch Drive - 246-8199.........................................84
Ratchets and Sockets — Twist Sockets - 3/8 inch Square Drive .........................................................85
Fractional Twist Socket Set, 13 Piece, 3/8 inch Drive - 241-0873 ....................................................85
Ratchets and Sockets — Individual Sockets...................................................................................86
Individual Fractional Sockets, 1/4 in Drive ................................................................................86
Individual Fractional Sockets, 3/8 in Drive ................................................................................86
Individual Fractional Sockets, 1/2 in Drive ................................................................................89
Individual Fractional Sockets, 3/4 in Drive ................................................................................92
Individual Fractional Sockets, 1 in Drive...................................................................................94
Individual Fractional Sockets, 1 1/2 in Drive ..............................................................................96
Individual Metric Sockets, 1/4 in Drive .....................................................................................97
Individual Metric Sockets, 3/8 in Drive .....................................................................................98
Individual Metric Sockets, 1/2 in Drive ................................................................................... 100
Individual Metric Sockets, 3/4 in Drive ................................................................................... 102
Individual Metric Sockets, 1 in through 2 1/2 in Drive (also No. 5 Spline)....................................... 103
Ratchets and Sockets — Special Application Sockets ................................................................... 106
Fractional Hex Driver Set, 10 Piece - 214-6142 ......................................................................... 106
Fractional Hex Ball Driver Socket Set, 8 Piece - 246-8499 .......................................................... 106
Metric Hex Driver Set, 9 Piece - 194-3585............................................................................... 107
Metric Hex Ball Driver Socket Set, 8 Piece - 243-5182............................................................... 108
Individual Fractional Hex Driver Sockets ................................................................................ 108
Drivers for TORX Screws .................................................................................................... 108
TORX Driver Set, 10 Piece - 194-3584..................................................................................... 109
Inverted TORX Socket Set, 10 Piece - 227-4383........................................................................ 109
Pin Socket - 5P-5249 .......................................................................................................... 110
Hex Socket, 55 mm (Spline Drive) - 159-2833 ........................................................................... 110
Stacking Sockets (Metric) ................................................................................................... 111

7
Hand Tools
Special Large Socket Wrenches .......................................................................................... 111
Lock Removal Socket ......................................................................................................... 111
Spark Plug Sockets............................................................................................................ 112
Ratchets and Sockets — Extensions/Adapters .............................................................................. 113
Universal Joint Extension Socket.......................................................................................... 113
Socket Extensions ............................................................................................................. 113
Universal Drives................................................................................................................ 113
Ratchet Adapter - 1P-0853................................................................................................... 114
Hex Shank - 4C-9818 .......................................................................................................... 114
Universal Joint - 4C-9819 .................................................................................................... 114
Socket Drive Adapters ....................................................................................................... 115
Impact Wrench Socket Adapters.......................................................................................... 115
Universal Joint.................................................................................................................. 115
Cordless Power Tools............................................................................................................... 116
463-6821 Cordless Impact Wrench Kit (18v)............................................................................. 116
Cordless Drill Kit (18v) - 151-0968 .......................................................................................... 116
Heavy-Duty Angle Grinder, 11,000 RPM, 4.5 inch - 288-2512........................................................ 117
Pneumatic Tools — Impact Wrenches ......................................................................................... 118
Composite Pneumatic Impact Wrenches................................................................................ 118
Impact Wrenches, 3/8 inch.................................................................................................. 119
Impact Wrenches, 1/2 and 3/4 inch ....................................................................................... 120
Impact Wrenches, 1 inch .................................................................................................... 121
Impact Wrenches Repair Kits .............................................................................................. 122
Pneumatic Tools — Sanders and Polishers .................................................................................. 123
Sanders and Polishers ....................................................................................................... 123
Pneumatic Tools — Grinders ..................................................................................................... 125
Air Grinders ..................................................................................................................... 125
Pneumatic Tools — Drills ......................................................................................................... 126
Air Drills .......................................................................................................................... 126
Pneumatic Tools — Air Hammers ............................................................................................... 127
Air Hammer - 222-3080........................................................................................................ 127
Air Hammer Accessories .................................................................................................... 127
Pneumatic Tools — Ratchet....................................................................................................... 128
Air Ratchet - 222-3059 ........................................................................................................ 128
Pneumatic Tools — Shears ....................................................................................................... 129
Shears - 222-3083 .............................................................................................................. 129
Pneumatic Snap Ring Tool - 430-4389 .................................................................................... 129
Pneumatic Tools — Engraver ..................................................................................................... 130
Air Engraver - 223-1154....................................................................................................... 130
Pneumatic Tools — Air Guns ..................................................................................................... 131
Safety Air Guns................................................................................................................. 131
Jet Guard Safety Air Gun - 441-5255 ...................................................................................... 131
Jet Guard Safety Air Gun .................................................................................................... 132
Safety Blow Guns.............................................................................................................. 132
Gun Vac®......................................................................................................................... 132
Pneumatic Tools — Spray Guns ................................................................................................. 134
Pneumatic Syphon Spray Gun - 441-5254................................................................................ 134
Pneumatic Syphon Spray Gun - 4C-5746................................................................................. 134
Spray Gun Canister............................................................................................................ 134
Pneumatic Oil Gun ............................................................................................................. 135
Torque Tools — Torque Wrenches, Adapters, and Extensions .......................................................... 136
Cat Electronic Torque Wrenches .......................................................................................... 136
Click Type Torque Wrenches ............................................................................................... 137
Dial Type Torque Wrenches................................................................................................. 138
Heavy-Duty Box Wrenches ................................................................................................. 138
Torque Wrench Extensions.................................................................................................. 139

8
 Hand Tools
Adapters and Extensions for Torque Wrenches ....................................................................... 139
Special Torque Wrench Extensions ....................................................................................... 140
Torque Computer - 376-4937................................................................................................. 140
Torque Tools — Torque Testers .................................................................................................. 141
Degree Wheel - 8T-3052...................................................................................................... 141
Mechanical Torque Tester - 1P-7460...................................................................................... 141
Electronic Torque Testers.................................................................................................... 142
Grease Guns ........................................................................................................................... 143
Megaboost Lock-n-Load Grease Gun - 385-1742 ...................................................................... 143
Workforce Pro Grease Gun - 385-1743 ................................................................................... 143
Lever Grease Gun, Model Pro "L" - 8F-9866 ............................................................................. 143
Pistol Grip Grease Gun - 190-5622 ......................................................................................... 144
Electric Grease Gun........................................................................................................... 145
Cordless Electric Grease Gun - 241-0706 ................................................................................ 145
Cat Screwdrivers..................................................................................................................... 147
Screwdriver Set, 5 Piece - 233-1640 ...................................................................................... 147
Screwdriver Set - 9U-7290................................................................................................... 147
Black Plastic Handle Screwdriver Set, 6 Piece - 162-7804.......................................................... 147
Black Plastic Handled Screwdrivers ..................................................................................... 148
Ratcheting Screwdriver, 5 Bits - 9U-7291................................................................................ 148
32-Piece Screwdriver Set 386-3366 ....................................................................................... 148
Insulating Screwdriver ....................................................................................................... 149
Nutdrivers........................................................................................................................ 149
Torx Driver Set.................................................................................................................. 149
Torx Driver ....................................................................................................................... 150
Tool Bit Set, 6 Piece - 9U-7328.............................................................................................. 150
Off-Set Slotted Screwdriver - 5P-0302.................................................................................... 150
Cat Pliers ............................................................................................................................... 151
Yellow Grip Pliers Set, 3 Piece - 233-1639 ............................................................................... 151
Cat Locking Pliers Set, 5 Piece - 316-0707............................................................................... 151
Combination and Multiple Position Pliers ............................................................................... 151
Soft Jaw Pliers – 6V-0006.................................................................................................... 152
Retaining Ring Pliers .......................................................................................................... 152
External Pliers - 5P-5197 ..................................................................................................... 153
Internal Retaining Ring Pliers - 1U-8758 ................................................................................. 153
Pliers 444-6561.................................................................................................................. 153
External Retaining Ring Pliers - 2P-8312 ................................................................................. 154
Hammers and Slide Sledges ...................................................................................................... 155
Slide Sledge® Heavy Equipment Hammers ............................................................................. 155
Slide Sledge Tips............................................................................................................... 155
Slide Sledge Accessories ................................................................................................... 156
Slide Sledge Hammer Repair Parts ....................................................................................... 157
Hammers ......................................................................................................................... 157
Multiple Use Hammers ....................................................................................................... 158
Handled Tooth Pin Removers ............................................................................................... 159
Handheld Tooth Pin Removers ............................................................................................. 159
Chisels and Punches ................................................................................................................ 160
Pin Punch Set, 7 Piece - 226-1900 ......................................................................................... 160
Drift Punch Set, 5 Piece - 227-3129........................................................................................ 160
Chisel Group, 5 Piece - 227-3795........................................................................................... 161
Individual Chisels and Punch Pieces ..................................................................................... 161
Pry Bars................................................................................................................................. 162
Pry Bars .......................................................................................................................... 162
Bead Braker Bar - 4F-5166 .................................................................................................. 162
Pry Bar Display - 244-0910................................................................................................... 162
Handled Pry Bars .............................................................................................................. 163

9
Hand Tools
Handled Pry Bar - 160-5119 ................................................................................................. 163
Miscellaneous Hand Tools — Knives, Saws and Cutting Tools......................................................... 164
3-inch Stainless Steel Lockback - 429-0608............................................................................. 164
5-inch Textured Stainless Steel Lockback - 429-0610 ................................................................ 164
5-inch Heavy-Duty Wood and Brass Lockback - 429-0611 .......................................................... 165
5-inch Wood Inset Liner Lock - 429-0612 ................................................................................ 165
5-inch G10 Liner Lock - 429-0613 and 429-0614......................................................................... 166
17-Function Multi-tool - 429-0609 .......................................................................................... 166
3 3/4-inch Two-Blade Electricians Knife - 429-0615 ................................................................... 167
Utility Knife - 429-0616 ........................................................................................................ 167
Utility Knife Blades ............................................................................................................ 168
Single Edge Razor Blades ................................................................................................... 168
Hacksaws........................................................................................................................ 168
File Set, 8 piece ................................................................................................................ 169
Filter Cutter - 175-7546 ........................................................................................................ 169
Quick Release Tubing Cutters .............................................................................................. 170
Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges.................................................. 171
Universal Level - 9U-7329 .................................................................................................... 171
Protractor - 441-3703.......................................................................................................... 171
Tape Measures ................................................................................................................. 171
Angle Finder and Level ....................................................................................................... 172
Tape Measures ................................................................................................................. 172
Steel Tape Measure........................................................................................................... 173
1000 mm Straight Edge - 386-3364 ......................................................................................... 173
Taper Gauge - 4C-8733 ....................................................................................................... 173
Block Magnet - 4C-9798...................................................................................................... 174
O-Ring Measuring Cone - 9U-5155 ........................................................................................ 174
Check-A-Thread................................................................................................................ 174
Feeler Gauges .................................................................................................................. 175
Dual Scale Feeler Gauge Set, 13 Blade - 383-8887.................................................................... 175
Plastic Gauges for Checking Clearance ................................................................................. 175
Hardness Tester - 6V-6035................................................................................................... 176
Thread Pitch Gauges.......................................................................................................... 176
Miscellaneous Hand Tools — Seal Picks..................................................................................... 177
Seal Pick - 5P-1720 ............................................................................................................ 177
Seal Pick Kit - 5P-7414........................................................................................................ 177
Seal Pick - 195-4609 ........................................................................................................... 177
Miscellaneous Hand Tools — Brushes ........................................................................................ 178
Scratch Brushes ............................................................................................................... 178
Corner Cleaner Wire Brush - 160-0774 ................................................................................... 178
Longneck Wire Brush - 160-0772 .......................................................................................... 178
Industrial Wire Scrubber - 160-0775 ...................................................................................... 179
Parts Cleaning Brushes ...................................................................................................... 179
Paint Brushes ................................................................................................................... 179
Acid Brushes.................................................................................................................... 179
Battery Post Brush - 1U-9921 ............................................................................................... 180
Miscellaneous Hand Tools — Miscellaneous ............................................................................... 181
Rivet Sets ........................................................................................................................ 181
Riveter Kit - 129-1063.......................................................................................................... 181
Shovels and Spades .......................................................................................................... 181
Retrieval Tools .................................................................................................................. 182
Inspection Mirror .............................................................................................................. 182
Scraper ........................................................................................................................... 182
Filter and Plug Removal and Installation Tools ......................................................................... 182
Cab Glass Installation Tools................................................................................................. 183
Superior E-Z Thrust Caulker................................................................................................. 183

10
 Hand Tools
Super Ratchet-Type Caulker ................................................................................................ 183
BIM Saw Blades ............................................................................................................... 183
Bi-Metal All-Purpose Tiger Saw Blades ................................................................................. 184
Terminal Tool Group - 435-5074............................................................................................. 184
Tool Boxes ............................................................................................................................. 185
Cat 55-Inch Tool Boxes ....................................................................................................... 185
Cat 40-Inch Tool Boxes ....................................................................................................... 186
Cat 26-Inch Tool Boxes ....................................................................................................... 187
Drop Front Tool Chest - 329-6983........................................................................................... 188
Cat Well Cabinet - 471-9317 ................................................................................................. 188
Cat Multi-Purpose Roll Cart - 385-1737 ................................................................................... 189
All-Purpose Roll Cart - 385-1738 ........................................................................................... 189
Tool Bag with Carrying Strap - 248-2283 ................................................................................. 189
Cordura Cloth Tool Bag....................................................................................................... 190
Heavy Duty Plastic Tool Box - 329-6922 .................................................................................. 190
Tool Box - 9U-6219 ............................................................................................................. 190
Lock - 174-9803 ................................................................................................................. 190
Lock Kit - 5P-4724 .............................................................................................................. 191
Metal Storage Boxes with Hinged Lids and Socket Trays .......................................................... 191
Plastic Tool Box - 202-8643 .................................................................................................. 191
Case and Dividers ............................................................................................................. 191
Plastic Storage Cases with Hinged Lids ................................................................................. 192
Foam Block for Plastic Storage Cases ................................................................................... 192
Plastic Divided Utility Boxes with Hinged Lids ......................................................................... 193
Protector Cases - Pelican Line ............................................................................................. 194

11
Tool Sets — Hand Tool Sets
Serviceman's Tool Set, 117 Piece Set - 8T-0460
Warranty: See individual part number
• Ideal for servicemen apprentices and shop mechanics
• Large assortment of 3/8 inch, 1/2 inch and 3/4 inch drive tools, 1/4 inch to 1 5/
8 inch wrenches, pliers, punches, hammers and screwdrivers
• Designed for use on heavy equipment
• See 8T-0461 Serviceman's Tool Set, 95 Piece, for a similar but smaller set of
tools; 8T-0461 contains complete groups of 1/4 inch, 3/8 inch and 1/2 inch
drive tools
• Individual hand tools within the group have a lifetime warranty
• Tool box must be ordered separately

Part Number Description Size

8T-0460 Serviceman's Tool Set (117 piece tool set) –
3/8 inch Drive Tools
239-6824 Reversible Ratchet, 3/8 in Drive 3/8 in
8H-8562 Universal Socket 7/16 in
8H-8563 Universal Socket 1/2 in
8H-8564 Universal Socket 9/16 in
8H-8565 Universal Socket 5/8 in
8H-8566 Universal Socket 3/4 in
8H-8567 Socket 7/16 in
8H-8568 Socket 1/2 in
8H-8569 Socket 9/16 in
8H-8570 Socket 5/8 in
8H-8571 Socket 3/4 in
8H-8573 Speeder Handle 3/8 in
8H-8574 Socket Extension 76.2 mm (3.00 in) long
8H-8575 Extension Assembly 152.4 mm (6.00 in) long
8H-8576 Adapter 3/8 in Female to 1/2 in Male
8S-2274 Socket 3/8 in
8S-2284 Universal Socket 3/8 in
1/2 inch Drive Tools
168-0383 Breaker Bar 1/2 in
1S-0259 Socket 1/2 in
239-6826 Reversible Ratchet 1/2 in
8H-8549 Socket 9/16 in
8H-8550 Socket 5/8 in
8H-8551 Socket 11/16 in
8H-8552 Socket 3/4 in
8H-8553 Socket 13/16 in
8H-8554 Socket 7/8 in

12
 Tool Sets — Hand Tool Sets
Serviceman's Tool Set, 117 Piece Set - 8T-0460 (Cont'd.)
Part Number Description Size
8H-8555 Socket 15/16 in
8H-8556 Socket, 1 in 1 in
8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in) long
8H-8560 Universal Joint 1/2 in
8H-8561 Adapter 1/2 in Female to 3/4 in Male
3/4 inch Drive Tools
160-6389 Reversible Ratchet Head 3/4 in
162-8716 Ratchet Head Handle –
8H-8504 Socket 2 1/4 in
8H-8529 Socket 3/4 in
8H-8530 Socket 7/8 in
8H-8531 Socket 15/16 in
8H-8532 Socket 1 in
8H-8533 Socket 1 1/16 in
8H-8534 Socket 1 1/8 in
8H-8535 Socket 1 1/4 in
8H-8536 Socket 1 5/16 in
8H-8537 Socket 1 1/2 in
8H-8538 Socket 1 11/16 in
8H-8539 Socket 1 5/8 in
8H-8540 Socket 1 3/4 in
8H-8541 Socket 1 7/8 in
8H-8542 Socket 2 in
8H-8543 Socket 2 1/8 in
8H-8544 Socket 2 3/16 in
8H-8546 Breaker Bar Head 3/4 in
8H-8548 Socket Extension 203.2 mm (8.00 in) long
Combination Wrenches
1S-0253 Combination Wrench 3/4 in (short)
1S-0254 Combination Wrench 9/16 in (short)
4C-9592 Combination Wrench 3/8 in
4C-9593 Combination Wrench 7/16 in
4C-9594 Wrench, 1/2 in (low idle adjustment) 1/2 in
4C-9595 Combination Wrench 9/16 in
4C-9596 Combination Wrench 5/8 in
4C-9597 Combination Wrench 11/16 in
4C-9598 Combination Wrench 3/4 in
4C-9599 Combination Wrench 13/16 in
4C-9601 Combination Wrench 7/8 in
4C-9602 Combination Wrench 15/16 in
4C-9603 Combination Wrench 1 in
4C-9604 Combination Wrench 1/4 in

13
Tool Sets — Hand Tool Sets
Serviceman's Tool Set, 117 Piece Set - 8T-0460 (Cont'd.)
Part Number Description Size
4C-9605 Combination Wrench 5/16 in
8H-8423 Combination Wrench 1 5/8 in
8H-8424 Combination Wrench 1 1/2 in
8H-8501 Open End Tappet Wrench 1/2 in x 9/16 in
8H-8516 Combination Wrench 1 1/16 in
8H-8517 Combination Wrench 1 1/8 in
8H-8518 Combination Wrench 1 1/4 in
8H-8519 Combination Wrench 1 5/16 in
8H-8520 Combination Wrench 1 3/8 in (short)
Sockets Designed for 12 Point Shoulder Bolts
8S-1589 Shoulder Bolt Socket, 12 point 1/4 in
8S-1590 Shoulder Bolt Socket, 12 point 5/16 in
8S-1591 Socket 3/8 in
8S-1592 Socket 7/16 in
8S-1593 Socket 1/2 in
8S-1594 Socket 9/16 in
8S-1595 Socket 5/8 in
8S-1596 Socket 11/16 in
8S-1597 Socket 3/4 in
8S-1598 Socket 13/16 in
8S-1599 Socket 7/8 in
8S-1600 Socket 15/16 in
8S-1601 Socket 1 in
Pliers, Punches, Screwdrivers and Hammers
1F-1159 Center Punch 3/16 in, 152.4 mm (6.00 in) long
1F-1161 Chisel 3/4 in Edge, 177.8 mm (7.00 in) long
1S-0257 Ball Peen Hammer, 0.34 kg (12 oz) 1 1/8 in, 340.2 g (12 oz)
1S-0258 Soft Face Hammer (Serviceable parts of the 1 11/16 in, 907.2 g (32 oz)
hammer, 1 Medium Tip 3S-0460, 1 Hard Tip
3S-0459)
277-8790 Plastic Handle Screwdriver 1/2 in tip, 469 mm (18.47 in) long
316-0706 Locking Pliers 254 mm (10.00 in)
5F-4764 Rolling Head Pry Bar, 40.64 cm (16 in) 406.4 mm (16.00 in) long
6V-6192 Slip Joint Pliers 208 mm (8 in)
6V-6193 Diagonal Cutting Pliers, 44.45 cm (17 1/2 in) 185.67 mm (7.31 in)
6V-6194 Needle Nose Pliers 181.1 mm (7.13 in)
6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)
6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47 in) long
6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm (10.91 in) long
6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41 in) long
6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm (8.38 in) long

14
 Tool Sets — Hand Tool Sets
Serviceman's Tool Set, 117 Piece Set - 8T-0460 (Cont'd.)
Part Number Description Size
6V-7936 Phillips Screwdriver No. 1 Phillips tip, 162.9 mm (6.66 in) long
6V-7937 Standard Screwdriver 239.78 mm (9.44 in) long
6V-7938 Screwdriver 1/4 in tip, 100.1 mm (3.94 in) long
8H-8577 Ball Peen Hammer 2 lb, 1 1/4 in
8H-8578 Punch 3/8 in Point, 241.3 mm (9.50 in) long
8H-8579 Punch 5/32 in Point, 203.2 mm (8.00 in) long
8H-8580 Scraper 38.1 mm (1.50 in) wide
8H-8581 Feeler Gauge 25 Blade, .0015 in - .025 in

Serviceman's Tool Set, 95 Piece Set - 8T-0461

Warranty: See individual part number
• Similar to 8T-0460 Serviceman's Tool Set, except in drive tools
• 8T-0461 set contains complete groups of 1/4 inch, 3/8 inch and 1/2 inch drive
tools; whereas the 8T-0460 set contains 3/8 inch, 1/2 inch and 3/4 inch drive
tools
• Individual hand tools within the group have a Lifetime Warranty; hand tools
within a group will be warranted when necessary
• Tool box must be ordered separately

Part Number Description Size

8T-0461 Serviceman's Tool Group (full 95 piece set) –

1/4 inch Drive Tools

239-6823 Reversible Ratchet 1/4 in
9S-1711 Socket 3/16 in
9S-1712 Socket 7/32 in
9S-1713 Socket 1/4 in
9S-1714 Socket 9/32 in
9S-1715 Socket 5/16 in
9S-1716 Socket 11/32 in
9S-1717 Socket 3/8 in
9S-1718 Socket 7/16 in
9S-1719 Socket 1/2 in
9S-1720 Socket Extension 50.8 m (2.00 in)
9S-1721 Extension 101.6 mm (4.00 in)
9S-1722 Socket Driver 1/4 in

15
Tool Sets — Hand Tool Sets
Serviceman's Tool Set, 95 Piece Set - 8T-0461 (Cont'd.)
Part Number Description Size
9S-1724 Universal Joint 1/4 in
9S-1725 Case –
9S-2573 Socket, Deep Length 3/8 in
3/8 inch Drive Tools
239-6824 Reversible Ratchet, 3/8 in Drive 3/8 in
8H-8562 Universal Socket 7/16 in
8H-8563 Universal Socket 1/2 in
8H-8564 Universal Socket 9/16 in
8H-8565 Universal Socket 5/8 in
8H-8566 Universal Socket 3/4 in
8H-8567 Socket 7/16 in
8H-8568 Socket 1/2 in
8H-8569 Socket 9/16 in
8H-8570 Socket 5/8 in
8H-8571 Socket 3/4 in
8H-8573 Speeder Handle 3/8 in
8H-8574 Socket Extension 76.2 mm (3.00 in) long
8H-8575 Extension Assembly 152.4 mm (6.00 in) long
8H-8576 Adapter 3/8 in Female to 1/2 in Male
8S-1589 Shoulder Bolt Socket, 12 point 1/4 in
8S-1590 Shoulder Bolt Socket, 12 point 5/16 in
8S-2274 Socket 3/8 in
8S-2284 Universal Socket 3/8 in
9S-1727 Universal Socket 11/16 in
9S-1728 Socket 11/16 in
1/2 inch Drive Tools
168-0383 Breaker Bar 1/2 in
1S-0259 Socket 1/2 in
239-6826 Reversible Ratchet 1/2 in
8H-8549 Socket 9/16 in
8H-8550 Socket 5/8 in
8H-8551 Socket 11/16 in

16
 Tool Sets — Hand Tool Sets
Serviceman's Tool Set, 95 Piece Set - 8T-0461 (Cont'd.)
Part Number Description Size
8H-8552 Socket 3/4 in
8H-8553 Socket 13/16 in
8H-8554 Socket 7/8 in
8H-8555 Socket 15/16 in
8H-8556 Socket, 1 in 1 in
8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in) long
9S-1729 Socket 1 1/16 in
9S-1730 Socket 1 1/8 in
9S-1731 Socket 1 1/4 in
9S-1732 Extension, 127 mm (5.0 in) Long (1/2 in Drive) 1/2 in drive, 127.0 mm (5.00 in) long
Combination Wrenches
1S-0254 Combination Wrench 9/16 in (short)
4C-9592 Combination Wrench 3/8 in
4C-9593 Combination Wrench 7/16 in
4C-9594 Wrench, 1/2 in (low idle adjustment) 1/2 in
4C-9595 Combination Wrench 9/16 in
4C-9596 Combination Wrench 5/8 in
4C-9597 Combination Wrench 11/16 in
4C-9598 Combination Wrench 3/4 in
4C-9599 Combination Wrench 13/16 in
4C-9601 Combination Wrench 7/8 in
4C-9602 Combination Wrench (2) 15/16 in
4C-9603 Combination Wrench 1 in
4C-9604 Combination Wrench 1/4 in
4C-9605 Combination Wrench 5/16 in
8H-8501 Open End Tappet Wrench (2) 1/2 in x 9/16 in
Pliers, Punches, Screwdrivers and Hammers
1F-1159 Center Punch 3/16 in, 152.4 mm (6.00 in) long
1F-1161 Chisel 3/4 in Edge, 177.8 mm (7.00 in) long
1S-0257 Ball Peen Hammer, 0.34 kg (12 oz) 1 1/8 in, 340.2 g (12 oz)
1S-0258 Soft Face Hammer (Serviceable parts of the 1 11/16 in, 907.2 g (32 oz)
hammer, 1 Medium Tip 3S-0460, 1 Hard Tip
3S-0459)

17
Tool Sets — Hand Tool Sets
Serviceman's Tool Set, 95 Piece Set - 8T-0461 (Cont'd.)
Part Number Description Size
208-6183 Hacksaw 419.0 mm (16.50 in) long
316-0706 Locking Pliers 254 mm (10.00 in)
5F-4764 Rolling Head Pry Bar, 40.64 cm (16 in) 406.4 mm (16.00 in) long
6V-6192 Slip Joint Pliers 208 mm (8 in)
6V-6193 Diagonal Cutting Pliers, 44.45 cm (17 1/2 in) 185.67 mm (7.31 in)
6V-6194 Needle Nose Pliers 181.1 mm (7.13 in)
6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)
6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47 in) long
6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm (10.91 in) long
6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41 in) long
6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm (8.38 in) long
6V-7936 Phillips Screwdriver No. 1 Phillips tip, 162.9 mm (6.66 in) long
6V-7937 Standard Screwdriver 239.78 mm (9.44 in) long
8H-8578 Punch 3/8 in Point, 241.3 mm (9.50 in) long
8H-8579 Punch 5/32 in Point, 203.2 mm (8.00 in) long
8H-8580 Scraper 38.1 mm (1.50 in) wide
8H-8581 Feeler Gauge 25 Blade, .0015 in - .025 in
9S-1742 Hex Key Wrench Assembly 9 bits: .05 in, 1/16 in, 5/64 in, 3/32 in, 7/64
in, 1/8 in, 9/64 in, 5/32 in, 3/16 in
9S-1743 Ferrule Nut Wrench 3/4 in and 1 in

Student Tool Set - 222-7876

Warranty: See individual part number
• A specially selected set of basic hand tools for students in the Caterpillar
Model Dealer Service Technician Program
• Premier quality tools for the work done in the classroom and on the job
• Over 200 tools

Part Number Description Part Number Description

222-7876 Complete Student Tool Set 194-3576 Metric Socket Set
146-2728 Flex Pickup Tool 194-3578 Metric Socket Set
194-3574 3/8 Drive, 12 Point Metric Socket Set, 12-piece 194-3584 Torx Socket Set

18
 Tool Sets — Hand Tool Sets
Student Tool Set - 222-7876 (Cont'd.)
Part Number Description Part Number Description
194-3585 Hex Bit Socket Set 293-3026 Metric Ball-end Hex Wrench Set
199-6156 Metric Socket Set 2P-5490 Deep Well Socket Set
199-9019 Metric Socket Set 396-2007 Safety Glasses
1U-5545 Combination Wrench Set 5P-1720 Seal Pick
1U-7321 Flashlight 5P-3277 Tape
200-1931 Metric Hex Key Set 5P-3920 Rule - Steel
200-8413 Metric Socket Set 8T-0461 Serviceman's Tool Group (full 95 piece set)
293-3025 Fractional Ball-end Hex Wrench Set

Hand Tool Set - 211-0616

Warranty: See individual part number
• For performing routine adjustment and maintenance of all Track-Type Trac-
tors, Track-Type Loaders and Engines

Part Part
Number Description Size Number Description Size
211-0616 Hand Tool Set (1) 4C-9605 Combination Wrench 5/16 in
185-3630 Filter Strap – 5F-4764 Rolling Head Pry Bar, 406.4 mm (16.00 in) long
Wrench Assm. (1) 40.64 cm (16 in) (1)
1S-0259 Socket 1/2 in, 1/2 in drive, 12 Pt. 6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm
211-0136 Cat Tool Bag – (8.41 in) long
(not shown) (1) 6V-7935 Standard Screwdriver Standard 1/4 in tip, 212.85
212-8144 Petcock Socket 1/2 in drive mm (8.38 in) long
212-8145 Drain Plug Socket (1) 1/2 in Female, 3/4 in Male 8F-9866 Cat Pro "L"
Grease Gun (1)
213-1983 Combination Pliers 167.0 mm (6.60 in) long
8H-8549 Socket 9/16 in, 1/2 in drive, 12 Pt.
239-6826 Reversible Ratchet 1/2 in
8H-8554 Socket 7/8 in, 1/2 in drive, 12 Pt.
4C-9592 Combination Wrench 3/8 in
8H-8555 Socket 15/16 in, 1/2 in drive, 12 Pt.
4C-9594 Wrench, 1/2 in 1/2 in
(low idle adjustment) 8H-8556 Socket, 1 in 1 in, 1/2 in drive, 12 Pt.
4C-9595 Combination Wrench 9/16 in 8H-8559 Socket Extension 1/2 in drive, 254.0 mm
(10.00 in) long
4C-9596 Combination Wrench 5/8 in
8H-8581 Feeler Gauge (1) 25 blade, .0015 in to .025 in
4C-9598 Combination Wrench 3/4 in
4C-9601 Combination Wrench 7/8 in 9S-1730 Socket 1 1/8 in, 1/2 in drive, 12 Pt
4C-9603 Combination Wrench 1 in 9S-1732 Extension – 127 mm (5.0 1/2 in drive, 127.0 mm
in) Long (1/2 in Drive) (5.0 in) long

1 Warranty: Six Months

19
Tool Sets — Hand Tool Sets
Hand Tool Set - 211-0617
Warranty: See individual part number
• For routine maintenance and adjustment of all rubber-tired machines
(Wheel Loaders, Motor Graders, Skidders, Solid Frame Off Highway Trucks,
Wheel Tractors, Backhoe Loaders and Integrated Toolcarriers)

Part Part
Number Description Size Number Description Size
211-0617 Hand Tool Set (2) (13.47 in) long
185-3630 Filter Strap – 6V-7934 Phillips Screwdriver No. 2 Phillips tip,
Wrench Assm. (3) 213.6 mm (8.41 in) long
1P-0545 Tire Pressure 8F-9866 Cat Pro "L"
Gauge Group Grease Gun (3)
1S-0259 Socket 1/2 in, 1/2 in drive, 12 Pt. 8H-8536 Socket 1 5/16 in, 3/4 in drive, 12 Pt.
212-8144 Petcock Socket 1/2 in drive 8H-8537 Socket 1 1/2 in, 3/4 in drive, 12 Pt.
212-8145 Drain Plug Socket (3) 1/2 in Female, 3/4 in Male 8H-8538 Socket 1 11/16 in, 3/4 in drive, 12 Pt.
213-1985 Sliding T-Handle 1/2 in drive, 304.8 mm 8H-8541 Socket 1 7/8 in, 3/4 in drive, 12Pt.
(12.00 in) long 8H-8549 Socket 9/16 in, 1/2 in drive, 12 Pt.
4C-9592 Combination Wrench 3/8 in 8H-8551 Socket 11/16 in, 1/2 in drive, 12 Pt.
4C-9594 Wrench, 1/2 in (low 1/2 in 8H-8552 Socket 3/4 in, 1/2 in drive, 12 Pt.
idle adjustment) 8H-8553 Socket 13/16 in, 1/2 in drive, 21 Pt.
4C-9595 Combination Wrench 9/16 in 8H-8554 Socket 7/8 in, 1/2 in drive, 12 Pt.
4C-9596 Combination Wrench 5/8 in 8H-8555 Socket 15/16 in, 1/2 in drive, 12 Pt.
4C-9597 Combination Wrench 11/16 in 8H-8559 Socket Extension 1/2 in drive, 254.0 mm
4C-9598 Combination Wrench 3/4 in (10.00 in) long
4C-9605 Combination Wrench 5/16 in 8H-8581 Feeler Gauge (3) 25 blade, .0015 in to .025 in
5F-4764 Rolling Head Pry Bar, 406.4 mm (16.00 in) long 9S-1730 Socket 1 1/8 in, 1/2 in drive, 12 Pt
40.64 cm (16 in) (3)
9S-1731 Socket 1 1/4 in, 1/2 in drive, 12 Pt.
6V-7932 Standard 3/8 in tip, 342.1 mm
Screwdriver

Hand Tool Set - 214-6153

Warranty: See individual part number
• Use for routine maintenance adjustments on rear engine Track-Type
Loaders such as the 943, 953, 963 and 973

2 Warranty: Lifetime
3 Warranty: Six Months

20
 Tool Sets — Hand Tool Sets
Hand Tool Set - 214-6153 (Cont'd.)
Part Part
Number Description Size Number Description Size
214-6153 Hand Tool Group (4) – 6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm
185-3630 Filter Strap – (8.38 in) long
Wrench Assm. (5) 8F-9866 Cat Pro "L"
211-0136 Cat Tool Bag (not 610.0 mm x 203.0 mm x 159.0 Grease Gun (5)
shown) (5) mm (24.00 in x 8.00 in x 6.25 in) 8H-8549 Socket 9/16 in
212-8144 Petcock Socket 1/2 in square 8H-8552 Socket 3/4 in
213-1983 Combination Pliers 167.0 mm (6.60 in) long 8H-8554 Socket 7/8 in
239-6826 Reversible Ratchet 1/2 in 8H-8556 Socket, 1 in 1 in
4C-9594 Wrench, 1/2 in 1/2 in 8H-8559 Socket Extension 1/2 in drive, 254.0 mm
(low idle adjustment) (10.00 in) long
4C-9595 Combination Wrench 9/16 in 9U-7419 Bit, 19.05 mm ( 3/4 in) –
4C-9598 Combination Wrench 3/4 in
5F-4764 Rolling Head Pry Bar, 406.4 mm (16.00 in) long
40.64 cm (16 in) (5)

Hand Tool Set - 214-7318

All 300 Series Excavators
Warranty: See individual part number
• Used for routine maintenance and adjustment
• Flat top tool box provides adequate storage for all tools in this group
• Using proper tools reduces downtime

Part Part
Number Description Size Number Description Size
214-7318 Complete Hand Tool – 1U-7569 Hex Wrench 14 mm
Group (6) 1U-7585 Hex Wrench 5/8 in
185-3630 Filter Strap Wrench Assm. – 213-6926 Impact Socket (1/2 in 10.0 mm, 1/2 in drive, 6 Pt.
(7)
Drive)
194-3535 Socket, Assembly, T30 – 213-6927 11.0 mm, 1/2 in drive, 6 Pt.
Impact Socket (1/2 in
194-3538 Socket, Assembly, T50 – Drive)
194-3565 Socket 30 mm, 1/2 in drive, 12 Pt. 213-6929 Impact Socket (1/2 in 13.0 mm, 1/2 in drive. 6 Pt.
199-6154 Socket (1/2 in Drive) 24 mm, 1/2 in drive, 12 Pt. Drive)
1U-7563 Hex Wrench, 4 mm 4 mm 214-7222 Combination Wrench 32.0 mm
214-7223 Combination Wrench 36.0 mm
1U-7564 Hex Wrench, 5 mm 5 mm
214-7329 Open End Wrench 41.0 mm
1U-7565 Allen Key 6 mm
214-7330 Adjustable Wrench 12.00 in, 1 5/16 jaw range
1U-7566 Hex Wrench 8 mm
1U-7567 Hex Wrench 10 mm 239-6826 Reversible Ratchet 1/2 in

4 Warranty: Lifetime
5 Warranty: Six Months
6 Warranty: Lifetime
7 Warranty: Six Months

21
Tool Sets — Hand Tool Sets
Hand Tool Set - 214-7318 (Cont'd.)
Part Part
Number Description Size Number Description Size
5F-4764 Rolling Head Pry Bar, 406.4 mm (16.00 in) long 6V-9112 Socket (1/2 in Drive) 17.0 mm, 1/2 in drive, 12
40.64 cm (16 in) (8) Pt.
6V-6192 Slip Joint Pliers 208 mm (8 in) 6V-9113 Socket (1/2 in Drive) 18.0 mm, 1/2 in drive, 12
Pt.
6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47
in) long 6V-9116 Socket (1/2 in Drive) 22.0 mm, 1/2 in drive, 12
Pt.
6V-9096 Wrench 16.0 mm
8F-9866 Cat Pro "L" Grease Gun (8)
6V-9098 Wrench 18.0 mm
8H-8424 Combination Wrench 1 1/2 in
6V-9099 Wrench 19.0 mm
8H-8577 Ball Peen Hammer (8) 2 lb, 1 1/4 in
6V-9101 Combination Wrench 21.0 mm
6V-9102 Combination Wrench 22.0 mm 8H-8581 Feeler Gauge (8) 25 Blade, .0015 in - .025 in
6V-9103 Combination Wrench 24.0 mm 9S-1732 Extension – 127 mm (5.0 1/2 in drive, 127.0 mm
6V-9104 30.0 mm in) Long (1/2 in Drive) (5.00 in) long
Combination Wrench
6V-9111 Socket (1/2 in Drive) 16.0 mm, 1/2 in drive, 12 9U-6219 Tool Box –
Pt. 9U-7968 Pry Bar (9) –

Hand Tool Set - 214-7219

Warranty: See individual part number
• For routine maintenance and adjustments

Part Number Description Size

214-7219 Complete Hand Tool Group (10) –
185-3630 Filter Strap Wrench Assm. (11) –
213-1985 Sliding T-Handle 1/2 in drive, 304.8 mm (12.00 in) long
4C-9592 Combination Wrench 3/8 in
4C-9595 Combination Wrench 9/16 in
4C-9598 Combination Wrench 3/4 in
5F-4764 Rolling Head Pry Bar, 40.64 cm (16 in) 406.4 mm (16.00 in) long
8F-9866 Cat Pro "L" Grease Gun (11)
8H-8549 Socket 9/16 in
8H-8556 Socket, 1 in 1 in
8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in) long
8H-8581 Feeler Gauge (11) 25 Blade, .0015 in - .025 in

8 Warranty: Six Months

9 Warranty: Lifetime
10 Warranty: Lifetime
11 Warranty: Six Months

22
 Tool Sets — Hand Tool Sets
Hand Tool Set - 157-0674
Model: 972G Wheel Loader
Warranty: See individual part number
• Used to perform routine maintenance and adjustment
• Twenty six (26) individual hand tools
• Metric wrenches and sockets accommodate fasteners and fittings on
wheel loader
• Reduce downtime by using proper tools

Part Number Description Size

157-0674 Complete Hand Tool Group (12) –
162-8716 Ratchet Head Handle –
185-3630 Filter Strap Wrench Assm. (13) –
199-6150 Socket (1/2 in Drive) 13.0 mm
199-6154 Socket (1/2 in Drive) 24 mm, 1/2 in drive, 12 Pt.
1P-0545 Tire Pressure Gauge Group –
1U-5548 Wrench, 8 mm (high idle adjustment) 8.0 mm
212-8144 Petcock Socket 1/2 in square
212-8145 Drain Plug Socket (13) 1/2 in Female, 3/4 in Male
213-1985 Sliding T-Handle 1/2 in drive, 304.8 mm (12.00 in) long
5F-4764 Rolling Head Pry Bar, 40.64 cm (16 in) (13) 406.4 mm (16.00 in) long
6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47 in) long
6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41 in) long
6V-9090 Wrench 10.0 mm
6V-9093 Wrench 13.0 mm
6V-9097 Wrench 17.0 mm
6V-9099 Wrench 19.0 mm
6V-9112 Socket (1/2 in Drive) 17.0 mm, 1/2 in drive, 12 Pt.
6V-9114 Socket (1/2 in Drive) 19.0 mm
6V-9116 Socket (1/2 in Drive) 22.0 mm, 1/2 in drive, 12 Pt.
6V-9118 Socket 30 mm
6V-9119 Socket 36 mm
6V-9120 Socket 46 mm
8F-9866 Cat Pro "L" Grease Gun (13)
8H-8546 Breaker Bar Head 3/4 in
8H-8548 Socket Extension 203.2 mm (8.00 in) long
8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in) long
8H-8581 Feeler Gauge (13) 25 Blade, .0015 in - .025 in

12 Warranty: Lifetime
13 Warranty: Six Months

23
Tool Sets — Hand Tool Sets
Hand Tool Set - 207-1515
Warranty: Lifetime unless otherwise noted
• Basic maintenance tool group
• Contains 21 individual hand tools
• Includes canvas bag for storing or transporting tools
• Warranty: Canvas bag, grease gun, and strap wrench assembly have a 6 month
warranty; all other hand tools have a lifetime warranty

Part Number Description Size

207-1515 Hand Tool Set –
185-3630 Filter Strap Wrench Assm. (14) –
1U-7563 Hex Wrench, 4 mm 4 mm
1U-7564 Hex Wrench, 5 mm 5 mm
1U-7565 Allen Key 6 mm
1U-7566 Hex Wrench 8 mm
1U-7567 Hex Wrench 10 mm
1U-7569 Hex Wrench 14 mm
1U-7585 Hex Wrench 5/8 in
239-6826 Reversible Ratchet 1/2 in
5F-4764 Rolling Head Pry Bar, 40.64 cm (16 in) (14) 406.4 mm (16.00 in) long
6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm (10.91 in) long
6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41 in) long
6V-9096 Wrench 16.0 mm
6V-9098 Wrench 18.0 mm
6V-9099 Wrench 19.0 mm
6V-9101 Combination Wrench 21.0 mm
6V-9102 Combination Wrench 22.0 mm
6V-9103 Combination Wrench 24.0 mm
8F-9866 Cat Pro "L" Grease Gun (14)
8H-8581 Feeler Gauge (14) 25 Blade, .0015 in - .025 in
9S-1732 Extension – 127 mm (5.0 in) Long (1/2 in Drive) 1/2 in drive, 127.0 mm (5.00 in) long

Hand Tool Set - 256-4816

Warranty: See individual part number
• Used for routine maintenance and adjustment
• Flat top tool box provides adequate storage for all tools in this group
• Using proper tools reduces downtime

Part Number Description Size

256-4816 Hand Tool Set (14) –
185-3630 Filter Strap Wrench Assm. (14) –
194-3565 Socket 30 mm, 1/2 in drive, 12 Pt.

14 Warranty: Six Months

24
 Tool Sets — Hand Tool Sets
Hand Tool Set - 256-4816 (Cont'd.)
Part Number Description Size
199-6154 Socket (1/2 in Drive) 24 mm, 1/2 in drive, 12 Pt.
1U-7563 Hex Wrench, 4 mm 4 mm
1U-7564 Hex Wrench, 5 mm 5 mm
1U-7565 Allen Key 6 mm
1U-7566 Hex Wrench 8 mm
1U-7567 Hex Wrench 10 mm
1U-7569 Hex Wrench 14 mm
1U-7585 Hex Wrench 5/8 in
200-1929 Metric Hex Key Set 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm,
5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm
213-6926 Impact Socket (1/2 in Drive) 10.0 mm, 1/2 in drive, 6 Pt.
213-6927 Impact Socket (1/2 in Drive) 11.0 mm, 1/2 in drive, 6 Pt.
213-6929 Impact Socket (1/2 in Drive) 13.0 mm, 1/2 in drive. 6 Pt.
214-7223 Combination Wrench 36.0 mm
214-7322 Adjustable Wrench 8 in
214-7324 Torx® Bit Set –
214-7329 Open End Wrench 41.0 mm
239-6826 Reversible Ratchet 1/2 in
256-4879 Torx Wrench, T50 –
6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47 in) long
6V-9096 Wrench 16.0 mm
6V-9098 Wrench 18.0 mm
6V-9099 Wrench 19.0 mm
6V-9101 Combination Wrench 21.0 mm
6V-9102 Combination Wrench 22.0 mm
6V-9103 Combination Wrench 24.0 mm
6V-9104 Combination Wrench 30.0 mm
6V-9111 Socket (1/2 in Drive) 16.0 mm, 1/2 in drive, 12 Pt.
6V-9113 Socket (1/2 in Drive) 18.0 mm, 1/2 in drive, 12 Pt.
6V-9116 Socket (1/2 in Drive) 22.0 mm, 1/2 in drive, 12 Pt.
8F-9866 Cat Pro "L" Grease Gun (15)
8H-8577 Ball Peen Hammer (15) 2 lb, 1 1/4 in
9S-1732 Extension – 127 mm (5.0 in) Long (1/2 in Drive) 1/2 in drive, 127.0 mm (5.00 in) long
9U-6219 Tool Box –
9U-7968 Pry Bar (16) –

15 Warranty: Six Months

16 Warranty: Lifetime

25
Tool Sets — Field Tool Sets
Field Tool Set - 133-8877
416C, 426C, 436C, 428C, and 438C Backhoe Loaders
Warranty: See individual part number
• Used to perform routine maintenance and adjustment operations on C-series
Backhoe Loaders
• Group includes 20 required hand tools
• Features both English and Metric wrenches and sockets
• Includes "T" handle wrench and extension for wheel lug removal and installation
• Canvas bag provides adequate storage even in limited space
Part Socket
Number Description Wrench Sizes Sizes T-Handles Extension Screwdrivers Pliers Socket
133-8877 Field Tool 7/16 in, 1/2 in, 13/ 15/16 in, 1/2 in and 3/4 in 3/4 in drive No. 2 Phillips and 1 slip joint, 1 3/8 in drive,
Group(1) 16 in, 7/8/in, 15/ 17.0mm (Eng- drive 1/4 in flat retaining ring T30 Torx Bit
16/in (English); lish and Met-
14.0 mm, 17.0 ric 1/2 in
mm (Metric) drive)
Group Also Contains:
185-3630 Filter Strap — — — — — — —
Wrench Assm.
(2)

8F-9866 Cat Pro "L" — — — — — — —

Grease Gun(2)

Field Tool Set - 144-4674

914G, 924F and 928G Wheel Loaders
Warranty: See individual part number
• Used to perform routine maintenance and adjustment operations
• Group contains 25 individual hand tools
• Features both English and metric wrenches and sockets
• Includes Cat grease gun, filter wrench and tire pressure gauge
• Canvas bag provides adequate storage even in limited space
Field Tool Set 144-4674 Includes:
Cat Tool Bag

Part Number Description Size Part Number Description Size

144-4674 Complete Field Tool Group 213-1983 Slip Joint Pliers –
185-3630 Filter Strap Wrench Assm. – 239-6824 Drive Ratchet 3/8 in
194-3535 Torx Socket T30 - 3/8 in 4C-9598 Wrench 3/4 in
194-3538 Torx Socket T50 - 3/8 in 4C-9599 Wrench 13/16 in
199-9026 Socket 10 mm 6V-7934 No. 2 Phillips –
199-9029 Socket 13 mm 6V-7935 1/4 Flat Screwdriver –
199-9032 Socket 16 mm 6V-9090 Wrench 10 mm
199-9035 Socket 19 mm 6V-9093 Wrench 13 mm

1 Warranty: Lifetime
2 Warranty: Six Months

26
 Tool Sets — Field Tool Sets
Field Tool Set - 144-4674 (Cont'd.)
Part Number Description Size Part Number Description Size
6V-9096 Wrench 16 mm 8H-8517 Wrench 1 1/8 in
6V-9098 Wrench 18 mm 8H-8520 Wrench 1 3/8 in
6V-9099 Wrench 19 mm 8H-8575 Drive Extension 6 x 3/8 in
8F-9866 Cat Pro "L" Grease Gun 8H-8576 Adapter 3/8 - 1/2 in
8H-8423 Wrench 1 5/8 in 8T-0886 Tire Pressure Gauge

Field Tool Set - 152-4942

902, 906, and 908 Compact Wheel Loader
Warranty: See individual part number
• Used to perform routine maintenance and adjustments
• Includes 12 required hand tools
• Includes both English and metric wrenches and screwdrivers
• Roll-up tool pouch provides good storage in limited space

Part Open End Hex Ball Peen Adjustable Filter Band T-Bar and Deep
Number Wrenches Wrench Screwdrivers Hammer Wrench Wrench Sliding Head Socket
152-4942 10.0, 11.0, 12.0, 4.0 mm #2 Phillips and 1/4 6 oz 8.00 in. 3 3/4 in 12.00 in long x 1/2 1 1/8 in, 6
13.0, 16.0, 17.0, in flat tip diameter in square drive point, 1/2 in
18.0, and 19.0 mm square drive
(3)

3 Warranty: Lifetime

27
Wrenches — Cat Standard Wrenches
Fractional Combination Wrench Set, Standard Length, 11 Piece - 4C-9600
Warranty: Lifetime
• Polished chrome finish
• 271-4700 Wrench Gripper Rack available

Size Part Number Description Length

— 4C-9600 Combination Wrench Set, Standard Length —
3/8 in 4C-9592 Combination Wrench 165.1 mm (6.50 in)
7/16 in 4C-9593 Combination Wrench 184.2 mm (7.25 in)
1/2 in 4C-9594 Wrench, 1/2 in (low idle adjustment) 204.0 mm (8.03 in)
9/16 in 4C-9595 Combination Wrench 222.3 mm (8.75 in)
5/8 in 4C-9596 Combination Wrench 241.3 mm (9.50 in)
11/16 in 4C-9597 Combination Wrench 260.4 mm (10.25 in)
3/4 in 4C-9598 Combination Wrench 280.2 mm (11.03 in)
13/16 in 4C-9599 Combination Wrench 299.2 mm (11.78 in)
7/8 in 4C-9601 Combination Wrench 318.3 mm (12.53 in)
15/16 in 4C-9602 Combination Wrench 338.1 mm (13.31 in)
1 in 4C-9603 Combination Wrench 357.1 mm (14.06 in)
Wrench Gripper Rack:
— 271-4700 Wrench Gripper Rack —

Fractional Short Length Combination Wrench Set, 9 Piece - 4C-9610

Warranty: Lifetime
• Polished chrome finish
• Includes vinyl bag

Size Part Number Description Length

4C-9610 Short Length Combination
Wrench Set
1/4 in 4C-9604 Combination Wrench 114.3 mm (4.50 in)
5/16 in 4C-9605 Combination Wrench 124.0 mm (4.88 in)
3/8 in 4C-9606 Combination Wrench 132.6 mm (5.22 in)
7/16 in 4C-9607 Combination Wrench 138.2 mm (5.44 in)
1/2 in 4C-9608 Combination Wrench 146.1 mm (5.75 in)
9/16 in 1S-0254 Combination Wrench 165.1 mm (6.50 in)

28
 Wrenches — Cat Standard Wrenches
Fractional Short Length Combination Wrench Set, 9 Piece - 4C-9610 (Cont'd.)
Size Part Number Description Length
5/8 in 4C-9609 Combination Wrench 157.2 mm (6.19 in)
11/16 in 4C-9611 Combination Wrench 167.4 mm (6.59 in)
3/4 in 1S-0253 Combination Wrench 174.8 mm (6.88 in)

Metric Combination Wrench Set, 14 Piece - 1U-5545

Warranty: Lifetime
• Metric, 6.0 mm through 19.0 mm
• Polished chrome finish
• Includes storage pouch

Size Part Number Description Length

— 1U-5545 Combination Wrench Set —
6.0 mm 1U-5546 Wrench 113 mm (4.45 in)
7.0 mm 1U-5547 Wrench 118 mm (4.65 in)
8.0 mm 1U-5548 Wrench, 8 mm (high idle 123 mm (4.84 in)
adjustment)
9.0 mm 1U-5549 Wrench 159 mm (626 in)
10.0 mm 6V-9090 Wrench 171 mm (6.73 in)
11.0 mm 6V-9091 Wrench 184 mm (7.24 in)
12.0 mm 6V-9092 Wrench 195 mm (7.68 in)
13.0 mm 6V-9093 Wrench 207 mm (8.15 in)
14.0 mm 6V-9094 Wrench 219 mm (8.62 in)
15.0 mm 6V-9095 Wrench 233 mm (9.17 in)
16.0 mm 6V-9096 Wrench 242 mm (9.53 in)
17.0 mm 6V-9097 Wrench 256 mm (10.08 in)
18.0 mm 6V-9098 Wrench 267 mm (10.51 in)
19.0 mm 6V-9099 Wrench 280 mm (11.02 in)

29
Wrenches — Cat Standard Wrenches
Metric Combination Wrench Set, 10 Piece - 233-1632
Warranty: Lifetime
• Increased torque — wrench box end contacts the fastener on the flats rather
than on the corners, preventing rounding of the fastener and allowing for more
torque to be applied
• Concentric or uniform wall thickness on the box end eliminates weak spots while
allowing for a thin wall design for greater accessibility
• Continuous arc open end design evenly distributes applied stress over the entire
radius of the open end, enhancing the wrench strength and life of the tool
• Long handles for better reach and greater applied torque
• Highly polished nickel/chrome plating — tough nickel for corrosion resistance
and chrome plating for wear resistance and a mirror-like finish

Drive Part Number Description Length

— 233-1632 Metric Wrench Set —
10.0 mm 6V-9090 Wrench 171.0 mm (6.73 in)
11.0 mm 6V-9091 Wrench 184.0 mm (7.24 in)
12.0 mm 6V-9092 Wrench 195.0 mm (7.68 in)
13.0 mm 6V-9093 Wrench 207.0 mm (8.15 in)
14.0 mm 6V-9094 Wrench 219.0 mm (8.62 in)
15.0 mm 6V-9095 Wrench 233.0 mm (9.17 in)
16.0 mm 6V-9096 Wrench 242.0 mm (9.53 in)
17.0 mm 6V-9097 Wrench 256.0 mm (10.08 in)
18.0 mm 6V-9098 Wrench 267.0 mm (10.51 in)
19.0 mm 6V-9099 Wrench 280.0 mm (11.02 in)

Fractional Combination Wrenches

Warranty: Lifetime
• 15° angle on open end and 15° offset on box end
• Box end is 12 point except 8H-8502 which is 6 point
• All are polished chrome finish except 9U-5130

Part Number Size Length Part Number Size Length

1S-0253 3/4 in (short) 174.8 mm (6.88 in) 4C-9601 7/8 in 318.3 mm (12.53 in)
1S-0254 9/16 in (short) 165.1 mm (6.50 in) 4C-9602 15/16 in 338.1 mm (13.31 in)
4C-9592 3/8 in 165.1 mm (6.50 in) 4C-9603 1 in 357.1 mm (14.06 in)
4C-9593 7/16 in 184.2 mm (7.25 in) 4C-9604 1/4 in 114.3 mm (4.50 in)
4C-9594 1/2 in 204 mm (8.03 in) 4C-9605 5/16 in 124 mm (4.88 in)
4C-9595 9/16 in 222.3 mm (8.75 in) 4C-9606 3/8 in 132.6 mm (5.22 in)
4C-9596 5/8 in 241.3 mm (9.50 in) 4C-9607 7/16 in 138.2 mm (5.44 in)
4C-9597 11/16 in 260.4 mm (10.25 in) 4C-9608 1/2 in 146.1 mm (5.75 in)
4C-9598 3/4 in 280.2 mm (11.03 in) 4C-9609 5/8 in 157.2 mm (6.19 in)
4C-9599 13/16 in 299.2 mm (11.78 in) 4C-9611 11/16 in 167.4 mm (6.59 in)

30
 Wrenches — Cat Standard Wrenches
Fractional Combination Wrenches (Cont'd.)
Part Number Size Length Part Number Size Length
8H-8423 1 5/8 in 562.4 mm (22.14 in) 386-3275 1 3/4 in (2) 559 mm (22.01 in)
8H-8424 1 1/2 in 534.5 mm (21.04 in) 386-3277 1 7/8 in 610 mm (24.02 in)
8H-8502 (1) 1/4 in 78.7 mm (3.10 in) 386-3281 2 in 635 mm (25 in)
8H-8516 1 1/16 in 382.8 mm (15.07 in) 386-3279 2 3/16 in 660 mm (25.98 in)
8H-8517 1 1/8 in 404.6 mm (15.93 in) 386-3278 2 1/4 in 686 mm (27.01 in)
8H-8518 1 1/4 in 433.1 mm (17.05 in) 386-3280 2 3/8 in 711 mm (27.99 in)
8H-8519 1 5/16 in 458.5 mm (18.05 in) 386-3352 2 1/2 in 762 mm (30 in)
8H-8520 1 3/8 in (short) 482.6 mm (19 in) 386-3282 3 1/2 in (2) 787 mm (30.98 in)
9U-5130 (2) 1 13/16 in 596 mm (23.46 in) 386-3283 3 7/8 in (2) 978 mm (38.50 in)
386-3276 1 7/16 in (2) 483 mm (19.02 in) 386-3284 4 in (2) 991 mm (39.02 in)
386-3274 1 11/16 in (2) 559 mm (22.01 in)

Metric Combination Wrenches

Warranty: Lifetime
• 15° angle on open end and 15° offset on box end

Size Part Number Length Size Part Number Length

6.0 mm 1U-5546 113.0 mm (4.45 in) 20.0 mm 6V-9100 292.0 mm (11.50 in)
7.0 mm 1U-5547 118.0 mm (4.65 in) 21.0 mm 6V-9101 304.0 mm (11.97 in)
8.0 mm 1U-5548 123.0 mm (4.84 in) 22.0 mm 6V-9102 318.0 mm (12.52 in)
9.0 mm 1U-5549 159.0 mm (6.26 in) 23.0 mm 214-7214 328.0 mm (12.91 in)
10.0 mm 6V-9090 171.0 mm (6.73 in) 24.0 mm 6V-9103 338.0 mm (13.31 in)
11.0 mm 6V-9091 184.0 mm (7.24 in) 25.0 mm 214-7215 356.0 mm (14.02 in)
12.0 mm 6V-9092 195.0 mm (7.68 in) 26.0 mm 214-7217 364.0 mm (14.33 in)
13.0 mm 6V-9093 207.0 mm (8.15 in) 27.0 mm 214-7218 376.0 mm (14.80 in)
14.0 mm 6V-9094 219.0 mm (8.62 in) 29.0 mm 214-7220 395.0 mm (15.55 in)
15.0 mm 6V-9095 233.0 mm (9.17 in) 30.0 mm 6V-9104 414.0 mm (16.30 in)
16.0 mm 6V-9096 242.0 mm (9.53 in) 32.0 mm 214-7222 433.0 mm (17.05 in)
17.0 mm 6V-9097 256.0 mm (10.08 in) 36.0 mm 214-7223 490.0 mm (19.29 in)
18.0 mm 6V-9098 267.0 mm (10.51 in) 46.0 mm 9U-5130 (2) 596.0 mm (23.46 in)
19.0 mm 6V-9099 280.0 mm (11.02 in) 55.0 mm 454-3162 (3) 711 mm (28 in)

1 Box end is 6 point

2 Black oxide finish
3 Satin finish, warranty: Manufacturer Six Months

31
Wrenches — Cat Standard Wrenches
Metric Combination Wrenches
Warranty: Lifetime
• 15° angle on open end and 15° offset on box end
• Flank drive wrenches use the flat areas of the bolt or nut to loosen or tighten,
rather than the corners, not stripping the bolts or nuts
• All are polished chrome finish except 386-3332 and 386-3333

Size Part Number Length

17.0 mm 386-3324 256 mm (10.08 in)
19.0 mm 386-3325 280 mm (11.02 in)
22.0 mm 386-3326 318 mm (12.52 in)
24.0 mm 386-3327 337 mm (13.28 in)
27.0 mm 386-3328 375 mm (14.76 in)
30.0 mm 386-3329 414 mm (16.30 in)
32.0 mm 386-3330 433 mm (17.05 in)
36.0 mm 386-3331 490 mm (19.29 in)
41.0 mm 386-3332 (4) 546 mm (21.50 in)
46.0 mm 386-3333 (5) 596 mm (23.46 in)

4 Satin finish
5 Black oxide finish

32
 Wrenches — Cat Ratcheting Wrenches
Fractional Ratcheting Wrench Set, 8 piece - 248-8810
Warranty: Lifetime
• Dual pawl ratcheting box end
• 15° offset box head
• Box ends are reversible
• Durable nickel chrome finish

Part Number Description Size Length

248-8810 Fractional Ratcheting Wrench Set – –
248-8811 Ratcheting Wrench 5/16 135 mm (5 5/16 in)
248-8812 Ratcheting Wrench 3/8 160 mm (6 5/16 in)
248-8813 Ratcheting Wrench 7/16 170 mm (6 11/16 in)
248-8814 Ratcheting Wrench 1/2 180 mm (7 1/16 in)
248-8815 Ratcheting Wrench 9/16 190 mm (7 1/2 in)
248-8816 Ratcheting Wrench 5/8 210 mm (8 1/4 in)
248-8817 Ratcheting Wrench 11/16 230 mm (9 1/16 in)
248-8818 Ratcheting Wrench 3/4 250 mm (9 13/16 in)

Ratcheting Box Wrench

Warranty: Caterpillar Standard Warranty, Six Months

• Single head
• Chrome finish
• 15 1/2 inches (39 cm) long

Part Number Description Size

451-9943 Single Head Ratcheting Box 1 5/8 in
Wrench

Fractional Straight Handle Wrench Set, 11 Piece - 8T-3120

Warranty: Capterillar Standard Warranty, 6 Months
• Available in hex sizes from 3/8 inch to 1 inch
• Ratchets in 45° increments (1/8 of a turn)
• Forged steel jaws, heat treated high carbon steel handles, and stainless steel riv-
ets with a black corrosion-resistant finish

33
Wrenches — Cat Ratcheting Wrenches
Fractional Straight Handle Wrench Set, 11 Piece - 8T-3120 (Cont'd.)
Part Number Description Hex Size Torque Capacity
8T-3120 Straight Handle Wrench Set – –
8T-3122 Wrench 3/8 26 N·m (19.18 ft-lb)
8T-3123 Wrench 7/16 29 N·m (21.39 ft-lb)
8T-3124 Wrench 1/2 34 N·m (25.08 ft-lb)
8T-3125 Wrench 9/16 45 N·m (33.19 ft-lb)
8T-3126 Wrench 5/8 68 N·m (50.15 ft-lb)
8T-3127 Wrench 11/16 86 N·m (63.43 ft-lb)
8T-3128 Wrench 3/4 97 N·m (71.54 ft-lb)
8T-3129 Wrench 13/16 114 N·m (84.08 ft-lb)
8T-3130 Wrench 7/8 141 N·m (104 ft-lb)
8T-3131 Wrench 15/16 159 N·m (117.27 ft-lb)
8T-3132 Wrench 1 170 N·m (125.39 ft-lb)

Fractional Straight Handle Wrench Set, 6 Piece - 8T-3227

Warranty: Caterpillar Standard Warranty: 6 Months
• Available in hex sizes from 1 1/16 inch to 1 5/8 inch
• Ratchets in 45° increments (1/8 of a turn)
• Forged steel jaws, heat treated high carbon steel handles, and stainless
steel rivets with a black corrosion-resistant finish

Part Number Description Hex Size Torque Capacity

8T-3227 Straight Handle Wrench Set – –
8T-3133 Wrench 1 1/16 in 190 N·m (140.14 ft·lb)
8T-3134 Wrench 1 1/8 in 200 N·m (147.51 ft·lb)
8T-3135 Wrench 1 1/4 in 270 N·m (199.14 ft·lb)
8T-3136 Wrench 1 3/8 in 340 N·m (250.77 ft·lb)
8T-3137 Wrench 1 1/2 in 410 N·m (302.40 ft·lb)
8T-3138 Wrench 1 5/8 in 475 N·m (350.34 ft·lb)

Metric Ratcheting Wrench Set, 12 piece - 248-8819

Warranty: Lifetime
• Dual pawl ratcheting box end
• 15° offset box head
• Box ends are reversible
• Durable nickel chrome finish

34
 Wrenches — Cat Ratcheting Wrenches
Metric Ratcheting Wrench Set, 12 piece - 248-8819 (Cont'd.)
Size Part Number Description Length
– 248-8819 Ratcheting Wrench Set –
8.0 248-8820 Ratcheting Wrench 135.0 mm (5.5 in)
9.0 248-8822 Ratcheting Wrench 150.0 mm (5.9 in)
10.0 248-8823 Ratcheting Wrench 160.0 mm (6.3 in)
11.0 248-8824 Ratcheting Wrench 170.0 mm (6.7 in)
12.0 248-8825 Ratcheting Wrench 175.0 mm (6.9 in)
13.0 248-8826 Ratcheting Wrench 180.0 mm (7.1 in)
14.0 248-8827 Ratcheting Wrench 190.0 mm (7.5 in)
15.0 248-8828 Ratcheting Wrench 200.0 mm (7.9 in)
16.0 248-8829 Ratcheting Wrench 210.0 mm (8.3 in)
17.0 248-8830 Ratcheting Wrench 230.0 mm (9.1 in)
18.0 248-8831 Ratcheting Wrench 240.0 mm (9.4 in)
19.0 248-8832 Ratcheting Wrench 250.0 mm (9.8 in)

Ratchet Wrench - 9U-6517

Model: 5000 Series Mining Excavators
SMCS Code: 7063-010, 7063-017, 0602
Warranty: Lifetime
• Used to quickly remove and install bolts (Use standard wrench for initial loosen-
ing; bolts cannot be tightened to final torque with ratchet wrench.)
• For 30 mm hex bolts
• Fits 46 mm (1 13/16 in) bolt heads
• Ratcheting style wrench greatly decreases time for removing or installing the
many bolts required to attach swing bearing/gear (Starting and running bolts
down until seated, or removing bolts, can take a large amount of time if done with
conventional hand tools.)
Reference:
SENR6058, 5130 Service Manual Module, Disassembly and Assembly; SENR6108,
5230 Service Manual Module, Disassembly and Assembly; SEHS9721 Special In-
struction, Assembly Procedure for Hydraulic Excavator (5130 only)
Part
Number Wrench Type Bolt Head Size Torque Specification Thickness Head Diameter Overall Length
9U-6517 Ratcheting 46 mm (1.81 in) up to 490 N•m (366 lb ft) 16.0 mm (0.63 in) 80.8 mm (3.18 in) 354.0 mm (14.00 in)
box end

35
Wrenches — Cat Ratcheting Wrenches
Ratcheting Box Flare Wrench, 3/4 inch Square Drive
Warranty: See individual part number
• Not sold as part of any sets - must be ordered individually

Part Number Description Hex Size

1U-5734 Wrench Assembly (1) 2 in

1 Warranty: Six Months

36
 Wrenches — Angle Wrenches
Angle Wrench Set, 30° and 60° Offset, 14 Piece - 1P-3515
Warranty: Lifetime
• Offset wrenches allow the use of one wrench in four different positions to gain
additional turning angles.

Part Number Description Size Length

1P-3515 Angle Wrench Set – –
1P-3501 Angle Wrench 3/8 in 122.9 mm (4.84 in)
1P-3502 Angle Wrench 7/16 in 137.4 mm (5.41 in)
1P-3503 Angle Wrench 1/2 in 151.6 mm (5.97 in)
1P-3504 Angle Wrench 9/16 in 166.6 mm (6.56 in)
1P-3505 Angle Wrench 5/8 in 180.8 mm (7.12 in)
1P-3506 Angle Wrench 11/16 in 197.6 mm (7.78 in)
1P-3507 Angle Wrench 3/4 in 210.3 mm (8.28 in)
1P-3508 Angle Wrench 13/16 in 225.6 mm (8.88 in)
1P-3509 Angle Wrench 7/8 in 239.8 mm (9.44 in)
1P-3510 Angle Wrench 15/16 in 254 mm (10 in)
1P-3511 Angle Wrench 1 in 269 mm (10.59 in)
1P-3512 Angle Wrench 1/16 in 283.5 mm (11.16 in)
1P-3513 Angle Wrench 1/8 in 298.5 mm (11.75 in)
1P-3514 Angle Wrench 1/4 in 327.2 mm (12.88 in)
Additional Sizes
127-2277 Angle Wrench 3/8 in 356.6 mm (14.04 in)
127-2278 Angle Wrench 1/2 in 385.8 mm (15.19 in)
127-2279 Angle Wrench 5/8 in 415 mm (16.34 in)
127-2280 Angle Wrench 7/8 in 473.2 mm (18.63 in)

Angle Wrench Set, 7 Piece - 233-1635

Warranty: Lifetime
• Continuous arc open end design evenly distributes applied stress over the entire
radius of the open end, enhancing the wrench strength and life of the tool
• Long handles for better reach and greater applied torque
• Highly polished nickel/chrome plating—tough nickel for corrosion resistance and
chrome plating for wear resistance and a mirror-like finish

Drive Part Number Description Length

– 233-1635 Angle Wrench Set –
3/8 in 1P-3501 Angle Wrench 122.9 mm (4.84 in)
7/16 in 1P-3502 Angle Wrench 137.4 mm (5.41 in)
1/2 in 1P-3503 Angle Wrench 151.6 mm (5.97 in)
9/16 in 1P-3504 Angle Wrench 166.6 mm (6.56 in)
5/8 in 1P-3505 Angle Wrench 180.8 mm (7.12 in)

37
Wrenches — Angle Wrenches
Angle Wrench Set, 7 Piece - 233-1635 (Cont'd.)
Drive Part Number Description Length
11/16 in 1P-3506 Angle Wrench 197.6 mm (7.78 in)
3/4 in 1P-3507 Angle Wrench 210.3 mm (8.28 in)

Angle Wrench Set, Large, 7 Piece - 233-1636

Warranty: Lifetime
• Continuous arc open end design evenly distributes applied stress over the entire
radius of the open end, enhancing the wrench strength and life of the tool
• Long handles for better reach and greater applied torque
• Highly polished nickel/chrome plating — tough nickel for corrosion resistance
and chrome plating for wear resistance and a mirror-like finish

Drive Part Number Description Length

– 233-1636 Angle Wrench Set, –
Large
13/16 in 1P-3508 Angle Wrench 225.6 mm (8.88 in)
7/8 in 1P-3509 Angle Wrench 239.8 mm (9.44 in)
15/16 in 1P-3510 Angle Wrench 254.0 mm (10 in)
1 in 1P-3511 Angle Wrench 269.0 mm (10.59 in)
1/16 in 1P-3512 Angle Wrench 283.5 mm (11.16 in)
1/8 in 1P-3513 Angle Wrench 298.5 mm (11.75 in)
1/4 in 1P-3514 Angle Wrench 327.2 mm (12.88 in)

Half-Moon Wrench - 194-4935

Warranty: Caterpillar Standard Warranty, Lifetime
• Moon-shaped wrench to help you get at hard to reach bolts
• Box end, 5/8 in and 3/4 in
• 12-point

Part Number Description

194-4935 Half-Moon Wrench

38
 Wrenches — Adjustable Wrenches
Heavy-Duty Adjustable End Wrench
Warranty: Caterpillar Standard Warranty, 6 Months

• Designed for heavy-duty work

• Accommodate many of the larger nuts on Caterpillar and other equipment
• Cadmium coated to prevent rusting
• Jaw adjusts in 1/8 inch increments

Part
Item Number Description Jaw Range Jaw Thickness Length Weight
– 8F-2243 Heavy Duty 69.9-120.7 mm 28.6 mm (1 1/8 914.4 mm (36 in) 10.0 kg (22 lb)
Wrench (2 3/4 in-4 3/4 in) in)
Service Parts for 8F-2243
– 8F-2246 Bolt – – – –
4 5B-3254 Nut – –

Adjustable Wrenches
Warranty: See individual part number
Part Number Jaw Range Length Finish
214-7322 24.0 mm (0.94 in) (1) 203.2 mm (8 in) Black Oxide
214-7323 29.0 mm (1.13 in) (2) 254.0 mm (10 in) Black Oxide
214-7330 33.0 mm (1.31 in) (1) 304.8 mm (12 in) Black Oxide
214-7332 42.0 mm (1.66 in) (2) 381.0 mm (15 in) Black Oxide

1 Warranty: Lifetime
2 Warranty: Six Months

39
Wrenches — Pipe Wrenches
Aluminum Pipe Wrenches
Warranty: Lifetime
• 10 inch through 24 inch
• 35% lighter than cast iron wrenches
• Heat treated titanium — aluminum alloy handle
• Forged hook jaw
• Heat-treated alloy steel parts interchangeable with iron wrenches

Item Part Number Description Pipe Capacity Length

1 4C-6974 Aluminum 14.0 mm - 63.0 mm (.25 in - 2.00 in) 356.0 mm (14.02 in)
Wrench
2 4C-6975 Aluminum 14.0 mm - 75.0 mm (.25 in - 2.50 in) 457.0 mm (17.99 in)
Wrench
3 4C-6976 Aluminum 14.0 mm - 90.0 mm (1.25 in - 3.00 in) 610.0 mm (24.02 in)
Wrench
Not 4C-6973 Aluminum 10.0 mm - 48.0 mm (.13 in - 1.50 in) 254.0 mm (10 in)
shown Wrench

Heavy-Duty Pipe Wrenches

Warranty: Lifetime
• High-tensile ductile iron handle and hardened tool-steel parts
• Designed to withstand heavy demands

Part Number Pipe Capacity Length Weight

4C-6962 10.0 mm - 48.0 mm (.13 in - 1.50 in) 254.0 mm (10.00 in) 5.4 kg (12 lb)
4C-6963 10.0 mm - 60.0 mm (.13 in - 2.00 in) 305.0 mm (12.00 in) 8.1 kg (18 lb)
4C-6964 14.0 mm - 63.0 mm (.25 in - 2.00 in) 356.0 mm (14.00 in) 9.5 kg (21 lb)
4C-6965 14.0 mm - 75.0 mm (.25 in - 2.50 in) 457.0 mm (18.00 in) 15.0 kg (33 lb)
4C-6972 14.0 mm - 90.0 mm (.25 in - 3.00 in) 610.0 mm (24.00 in) 27.2 kg (60 lb)

48 Inch Pipe Wrench - 386-3304

Warranty: Manufacturer, Lifetime
• Professional Strength
• 98% Lightweight Aluminum, 2% Steel

Part Number Max. Pipe Capacity Length

386-3304 152.4 mm (6.00 in) 1219.0 mm (48.00 in)

40
 Wrenches — Pipe Wrenches
48 inch Pipe Wrench
Warranty: Caterpillar Standard Warranty, Six Months
• Heavy-duty construction for strength and durability
• Forty percent lighter than cast iron
• Built-in pipe diameter scale

Part Number Max Pipe Capacity Length

457-3048 152.4 mm (6.00 in) 1219.0 mm (48.00 in)

60-Inch Pipe Wrench - 423-8977

Warranty: Manufacturer, Lifetime
• Professional Strength
• Cast Iron Handle
• Forged Steel Jaws
• Meets or exceeds: GGG-N65IE, Type II, Class A

Part Number Max Pipe Capacity Length

423-8977 20 cm (8 in) 152 cm (60 in)

41
Wrenches — Chain Wrenches
Chain Wrench for Special Applications - 1U-8760
Warranty: Caterpillar Standard Warranty, 6 Months
• Used for holding cylinders and other irregularly shaped objects—works for parts
of most any size and shape
• Special head design for turning wrench in either direction
• Ratcheting action makes it possible to regrip without removal
• Chain wrench capacity: 1/2 inch to 4 3/4 inch O.D

Part Number Description Size

1U-8760 Wrench for Special Applications Chain wrench capacity: 1/2 in to 4 3/4 in O.D.

Chain Wrench Group - 3P-1535

SMCS Code: 4303-017, 5105-017, 5309-017, 5102-017
Model: 16G, 518, 613C, 615, 910
Warranty: Capterillar Standard Warranty, 6 Months
• Used to remove and install threaded crown, which is used to retain head on later
hydraulic cylinders
• General purpose tool that can be used in many applications

Item Part Number Description

– 3P-1535 Chain Wrench Group
1 3P-1536 Handle
2 1U-8792 Chain Wrench Assembly, Handle Length 482.6 mm (19.00 in)
3 1U-8791 Chain - part of 1U-8792, 76.2 mm (3.00 in) O.D. Minimum and 171.5 mm (6.75 in) O.
D. Maximum
4 3P-1537 Pin - part of 1U-8792

42
 Wrenches — Filter Wrenches
Filter Strap Wrench - 185-3630
Warranty: Caterpillar Standard Warranty, 6 Months
• Provides quick, efficient service when removing or installing all spin-on type fuel
and oil filters
• Capable of applying higher torques required on larger filters without denting filter
can

Item Part Number Description

– 185-3630 Filter Strap Wrench Assembly
1 6H-7378 Retaining Ring
2 1P-0551 Spring Pin
3 2P-8253 Strap

Filter Wrench - 187-2718

Warranty: Lifetime
• Used to remove spin-on oil and fuel filters
• Makes filter removal quick and easy
• Fits filter diameters between 88.9 to 98.6 mm (3.50 to 3.88 in)

Part Number Description

187-2718 Filter Wrench

43
Wrenches — Hex Wrenches
Fractional Hex Bit Set, 9 Piece - 9S-1742
Warranty: Lifetime
• Black oxide finish
• 3 1/2 inch cadmium case
Part Number Description Length Size
9S-1742 Hex Key Wrench 3 in bits 9 bits: .05 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in,
Assembly 9/64 in, 5/32 in, 3/16 in

Fractional "L" Shaped Hex Key Wrench Set, 13 Piece - 200-1928

Warranty: Lifetime
• Plastic holder included
Part Number Description Size
200-1928 Fractional .05 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in,
Hex Key Set 1/4 in, 5/16 in and 3/8 in

Fractional Hex Key Wrench Set with Ball End, 13 Piece - 293-3025
Warranty: Lifetime
• Cat branded plastic holder included

Part Number Description Size

293-3025 Fractional Ball-end Hex .05 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in,
Wrench Set 3/16 in, 7/32 in, 1/4 in, 5/16 in and 3/8 in

44
 Wrenches — Hex Wrenches
Metric Hex Bit Set, 7 Piece - 200-1931
Warranty: Lifetime
• Black oxide finish bits
• Chrome plated case

Part Number Description Length Size

200-1931 Metric Hex Key Set 76.2 mm (3.00 in) 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm,
long bits 5.0 mm, 6.0 mm

Metric "L" Shaped Hex Key Wrench Set, 9 Piece - 200-1929

Warranty: Lifetime
• Cat branded plastic holder included

Part
Number Description Size
200-1929 Metric Hex Key 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm,
Set 6.0 mm, 8.0 mm, and 10.0 mm

Metric Hex Key Wrench Set with Ball End, 9 Piece - 293-3026
Warranty: Lifetime
• Cat branded plastic holder included

Part Number Description Size

293-3026 Metric Ball-end Hex 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm,
Wrench Set and 10.0 mm

"L" Shaped Torx Wrench T50 - 256-4879

Warranty: Lifetime
Part Number Description Length Flute Length Material
256-4879 Torx Wrench, T50 95.25 mm (3.75 in) 8.84 mm (0.348 in) steel

45
Wrenches — Hex Wrenches
Hex Key Wrenches, Standard and Metric
Warranty: Lifetime unless otherwise noted
• Extra length hex keys
• Inch and metric sizes

Part Number Size Part Number Size Part Number Size

1U-7559 1.5 mm 1U-7570 17 mm 1U-7580 5/16 in
1U-7560 2 mm 1U-7571 19 mm 1U-7581 3/8 in
1U-7561 2.5 mm 1U-7572 1/16 in 1U-7582 7/16 in
1U-7562 3 mm 1U-7573 5/64 in 1U-7583 1/2 in
1U-7563 4 mm 1U-7574 3/32 in 1U-7584 9/16 in
1U-7564 5 mm 1U-7575 1/8 in 1U-7585 5/8 in
1U-7565 6 mm 1U-7576 5/32 in 1U-7586 1 in
1U-7566 8 mm 1U-7577 3/16 in 1U-7632 3/4 in
1U-7567 10 mm
1U-7578 7/32 in 4C-4067 22 mm
1U-7568 12 mm
1U-7579 1/4 in
1U-7569 14 mm

T-Handle Allen Head Wrench Set

Warranty: Caterpillar Standard Warranty: Six Months
• Cushion grip
• Rust preventive coating
• Protanium steel
• Welded handle
Part Number Description Sizes
386-3239 8-piece Metric T-Handle Allen Head Wrench Set 2, 2.5, 3 ,4, 5, 6, 8, 10
386-3240 10-piece Fractional T-Handle Allen Head Wrench Set 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8

46
 Wrenches — Hex Wrenches
Hollow Head Screw Hex Wrenches
Warranty: Lifetime unless noted
• Used to remove and install hollow head screws

Item Part Number Description Size

1 1P-3566 Bit, 14.28 mm ( 9/16 in) 9/16 in
1 9U-7419 Bit, 19.05 mm ( 3/4 in) 3/4 in
2 5P-4205 Wrench 5/32 in
2 6V-0115 Wrench (1) 1/8 in
2 6V-2104 Wrench (1) 3/32 in

1 Warranty: Six Months

47
Wrenches — Special Application Wrenches
Spark Plug Wrench - 2P-5481
1P-5559 Spark Plug Adapter Wrench
SMCS Code: 1555-011
Model: 5.4 inch Bore Natural Gas Engines
Warranty: Lifetime
• Used to remove spark plugs and adapters on 5.4 inch Bore Natural Gas Engines
(G342, G353, G379, G398)
• Especially useful because plugs and adapters are deeply recessed in top of
engine
• 1P-5559 Wrench: Large end, 1.25 in; Small end, .75 in

Part Number Description

1P-5559 Spark Plug Adapter Wrench
2P-5481 Spark Plug Wrench

Open End Wrenches

Warranty: Lifetime
• Tappet wrench
• For low torque applications

Size Part Number Length

1/2 in x 9/16 in 8H-8501 9.50 in

Wrench, 41.0 mm - 214-7329

SMCS Code: 4303-010
Model: Telescoping Material Handlers RT50, RT60, and RTC60, 214B Hydraulic
Excavator
Warranty: Lifetime
• As special application tools, used to remove and install front steering cylinder
linkage knuckle on Cat vehicles listed above
• Forged steel, straight-handled, open end, with black oxide finish

Part Number Description Size

214-7329 Open End Wrench 41.0 mm

48
 Wrenches — Special Application Wrenches
Wrench, 55.0 mm - 4C-4065
SMCS Code: 4303-010
Models: Telescoping Material Handlers RT50, RT60, and RTC60
Warranty: Caterpillar Standard Warranty, 6 Months
• As special application tools, used to remove and install front steering cylinder
linkage knuckle on Cat vehicles listed above
• Forged steel, straight-handled, open end, with black oxide finish

Part Number Description Size

4C-4065 Open End Wrench 55.0 mm

Special Open End Wrenches

Warranty: See individual part number
• Special application wrenches for tight and confined spaces

Part Number Size Offset

386-3368 24 mm (1) 30°
9B-1496 1 5/8 in (2) 30°
0V-0455 1 7/8 in (2) 30°
9F-3869 2 3/4 in (1) 20°
8F-2239 2 9/32 in (3) 15°

Wrench Set, Double End Flare Nut, 3 Piece - 214-7335

Warranty: Lifetime
Part Number Size Description Length
214-7335 – Wrench Set –
214-7315 1/2 in x 9/16 in Wrench 173.0 mm (6.81 in)
214-7314 3/8 in x 7/16 in Wrench 147.6 mm (5.81 in)
214-7317 5/8 in x 11/16 in Wrench 200.8 mm (7.91 in)

1 Warranty: Six Months

2 Warranty: Lifetime
3 Warranty: Manufacturer, 30 Day

49
Wrenches — Special Application Wrenches
Individual Offset Wrenches, Double End Flare Nut
Warranty: Lifetime
Size Part Number Length
13/32 in and 15/32 in 5P-7254 127 mm (5 in)
17/32 in and 19/32 in 5P-7255 165.1 mm (6.50 in)
25/32 in and 29/32 in 5P-7256 190.5 mm (7.50 in)
3/4 in and 1 in 9S-1743 203.2 mm (8 in)

Special Application Wrenches

Warranty: Lifetime

Part Number Description Size Offset Application

128-8824 Deep Offset Wrench 16 mm 18 mm Fuel system
128-8825 Deep Offset Wrench (17 and 19 mm) 17 mm 19 mm Fuel system
5P-0144 Fuel Line Socket – – Fuel line
5P-0167 – – – Brake spring
5P-5195 – – – Fuel line
8T-0833 Box, end, chrome, for use with 1/2 inch ratchet 9/16 inch – Fuel pump
9S-9149 Box, offset, chrome 7/16 inch – Brake shoe bolt
adjustment

Saw Adjustment Wrench - 197-3672

Model: Harvester Head
Warranty: Caterpillar Standard Warranty, 6 Months
• Used to adjust saw tension on newer model saw heads
• Designed for easy access of adjustment nut
• Wrench opening: 3 3/4 inch

Part Number Description Size

197-3672 Saw Adjustment Wrench Wrench opening: 3 3/4 in

50
 Wrenches — Special Application Wrenches
Heavy-Duty Box Wrenches
Warranty: Lifetime
• Used to tighten large fasteners such as hitch pins

Item Part Number Description Size

1 5P-7320 Wrench 38.1 mm (1.50 in)
2 9U-7376 Sledge Wrench 46.0 mm (1.81 in)
3 8T-3196 Offset Box Wrench 47.6 mm (1.88 in)
4 5P-1661 Sledge Wrench 114 mm (4.5 in)

Nut Spanner Wrenches

Warranty: Caterpillar Standard Warranty, 6 Months
Item Part Number Description Diameter Range
1 1P-2856 Spanner Wrench 155.6-222.3 mm (6.13-8.75 in)
2 1P-2854 Spanner Wrench 114.3-158.8 mm (4.50-6.25 in)
3 1P-2853 Spanner Wrench(4) 50.8-120.7 mm (2.00-4.75 in)
4 1P-2852 Spanner Wrench 31.8-76.2 mm (1.25-3.00 in)
5 1P-2851 Spanner Wrench 19.1-50.8 mm (.75-2.00 in)

Slug Wrenches
Warranty: Lifetime
• Designed to be struck by a hammer on end to loosen frozen fasteners or to set
and tighten fasteners
• Heat treated for maximum durability and long life

Part Number Size (inches) Length Part Number Size (inches) Length
386-3286 1 1/2 194 mm (7.63 in) 386-3294 2 1/4 298 mm (11.73 in)
386-3287 1 1/4 192 mm (7.55 in) 386-3295 2 3/16 298 mm (11.73 in)
386-3288 1 11/16 198 mm (7.79 in) 386-3296 2 3/8 302 mm (11.88 in)
386-3289 1 13/16 203 mm (7.99 in) 386-3297 2 294 mm (11.57 in)
386-3290 1 3/4 203 mm (7.99 in) 386-3298 3 1/2 456 mm (17.95 in)
386-3291 1 5/8 199 mm (7.83 in) 386-3299 3 7/8 456 mm (17.95 in)
386-3292 1 7/16 194 mm (7.63 in) 386-3300 1 3/16 192 mm (7.55 in)
386-3293 1 7/8 203 mm (7.99 in) 386-3301 4 457 mm (17.99 in)

4 Warranty: Lifetime

51
Wrenches — Crowfoot Wrenches
Fractional Open-End Crowfoot Wrench Group, 9 piece, 3/8 inch Drive - 2P-5520
Warranty: Lifetime
• Can be used with 3/8 inch drive ratchet or torque wrenches
• Can be ordered by set or individually

Part Number Description Size Drive

2P-5520 Open-End Crowfoot Wrench Group
2P-5487 Adapter 3/8 3/8
2P-5488 Wrench 7/16 3/8
2P-5489 Wrench 1/2 3/8
2P-5491 Wrench 9/16 3/8
2P-5492 Wrench 5/8 3/8
2P-5493 Wrench 11/16 3/8
2P-5494 Wrench 3/4 3/8
2P-5495 Wrench 13/16 3/8
2P-5496 Wrench 7/8 3/8

Fractional Crowfoot Wrench Group, 11 Piece - 5P-0336

Warranty: Lifetime
• 12 point
• May be used with 3/8 inch or 1/2 inch drive ratchet or torque wrenches
• Can be ordered by set or individually

Part Number Description Size Drive

5P-0336 Crowfoot Wrench Group – –
5P-0324 Wrench 5/8 in 3/8 in
5P-0325 Wrench 11/16 in 3/8 in
5P-0326 Crowfoot Wrench 3/4 in 3/8 in
5P-0327 Wrench 13/16 in 3/8 in
5P-0328 Crowfoot Wrench (Fuel Line) 7/8 in 3/8 in
5P-0329 Crowfoot Wrench (Fuel Line) 15/16 in 3/8 in
5P-0331 Wrench 1 in 3/8 in
5P-0332 Wrench 1 1/16 3/8 in
5P-0333 Crowfoot Wrench 1 1/8 in 1/2 in
5P-0334 Wrench 1 1/4 in 1/2 in
5P-0335 Wrench 1 3/8 in 1/2 in
Optional Wrenches (not included in 5P-0336)
463-1899 Crowfeet Wrench (Fuel Line) 11/16 in 3/8 in
1U-5536 Crowfoot Wrench 1 5/16 in 1/2 in
1U-5732 Wrench 1 3/4 in 3/8 in

52
 Wrenches — Crowfoot Wrenches
Fractional Crowfoot Wrench Group, 11 Piece - 5P-0336 (Cont'd.)
Part Number Description Size Drive
1U-5734 Wrench 2 in 3/8 in
1U-5735 Wrench 2 1/8 in 3/8 in
5P-0294 Wrench 1 11/16 in 1/2 in

15-Piece 1/2-inch Fractional Crowfoot Wrench Set

Warranty: Caterpillar Lifetime Warranty
Special alloy steel for strength and durability
Continuous arc open end minimizes jaw spread for constant contact with the fastener to give you the maximum
torque with the minimum torque transmission loss
Available as a set or individually

Part Number Description Size Drive

430-9053 15- Piece Fractional Crowfoot Wrench Set — 1/2 in
Individual Drivers
430-9038 Crowfoot Wrench 1 1/16 in 1/2 in
430-9039 Crowfoot Wrench 1 1/8 in 1/2 in
430-9040 Crowfoot Wrench 1 3/16 in 1/2 in
430-9041 Crowfoot Wrench 1 1/4 in 1/2 in
430-9042 Crowfoot Wrench 1 5/16 in 1/2 in
430-9043 Crowfoot Wrench 1 3/8 in 1/2 in
430-9044 Crowfoot Wrench 1 7/16 in 1/2 in
430-9045 Crowfoot Wrench 1 1/2 in 1/2 in
430-9046 Crowfoot Wrench 1 9/16 in 1/2 in
430-9047 Crowfoot Wrench 1 5/8 in 1/2 in
430-9048 Crowfoot Wrench 1 11/16 in 1/2 in
430-9049 Crowfoot Wrench 1 3/4 in 1/2 in
430-9050 Crowfoot Wrench 1 13/16 in 1/2 in
430-9051 Crowfoot Wrench 1 7/8 in 1/2 in
430-9052 Crowfoot Wrench 2 in 1/2 in

Metric Flare Nut Crowfoot Wrench Set - 305-3129

Warranty: Caterpillar Lifetime Warranty

• 6 point
• 3/8 inch drive

Part Number Description Size Drive

305-3129 Metric Flare Nut Crowfoot Wrench Set 9 - 22 mm 3/8
Crowfoot Wrench Set Consists of:

53
Wrenches — Crowfoot Wrenches
Metric Flare Nut Crowfoot Wrench Set - 305-3129 (Cont'd.)
Part Number Description Size Drive
305-3115 Flare Nut Crowfoot Wrench 9 mm 3/8
305-3116 Flare Nut Crowfoot Wrench 10 mm 3/8
305-3117 Flare Nut Crowfoot Wrench 11 mm 3/8
305-3118 Flare Nut Crowfoot Wrench 12 mm 3/8
305-3119 Flare Nut Crowfoot Wrench 13 mm 3/8
305-3120 Flare Nut Crowfoot Wrench 14 mm 3/8
305-3121 Flare Nut Crowfoot Wrench 15 mm 3/8
305-3122 Flare Nut Crowfoot Wrench 16 mm 3/8
305-3123 Flare Nut Crowfoot Wrench 17 mm 3/8
305-3124 Flare Nut Crowfoot Wrench 18 mm 3/8
305-3125 Flare Nut Crowfoot Wrench 19 mm 3/8
305-3126 Flare Nut Crowfoot Wrench 20 mm 3/8
305-3127 Flare Nut Crowfoot Wrench 21 mm 3/8
305-3128 Flare Nut Crowfoot Wrench 22 mm 3/8
Additional Crowfoot Wrenches
386-3367 Flare Nut Crowfoot Wrench 24 mm 3/8

54
 Ratchets and Sockets — Ratchet and Socket Sets
Fractional Socket Set, 17 Piece, 1/4 inch Drive - 213-4443
Warranty: See individual part number
• 12 point
• 1/4 inch square drive
• Standard length sockets
• Chrome finish

Size Length Part Number Description

– – 213-4443 Socket Set (1)
Socket Set Consists of:
1/2 in 22.2 mm (.88 in) 9S-1719 Socket
1/4 in 22.2 mm (.88 in) 9S-1713 Socket
11/32 in 22.2 mm (.88 in) 9S-1716 Socket
3/16 in 22.2 mm (.88 in) 9S-1711 Socket
3/8 in 22.2 mm (.88 in) 9S-1717 Socket
5/16 in 22.2 mm (.88 in) 9S-1715 Socket
7/16 in 22.2 mm (.88 in) 9S-1718 Socket
7/32 in 22.2 mm (.88 in) 9S-1712 Socket
9/32 in 22.2 mm (.88 in) 9S-1714 Socket
Accessories
– 159.5 mm (6.28 in) 9S-1725 Case (2)
1/4 in – 239-6823 Reversible Ratchet
1/4 in – 9S-1722 Socket Driver
1/4 in Female to 3/8 in male – 213-4437 Socket Adapter
1/4 in – 9S-1724 Universal Joint
101.6 mm (4.00 in) – 9S-1721 Extension
3/8 in Female to 1/4 in male – 261-0443 Socket Adapter
50.8 m (2.00 in) – 9S-1720 Socket Extension

Fractional Socket Set, 11 Piece, 3/8 inch Drive - 9S-1746

Warranty: Lifetime
• 12 point
• 3/8 inch square drive
• Chrome finish
• Can be ordered by set or individually

1 Warranty: Lifetime
2 Warranty: Manufacturer, 90 Day

55
Ratchets and Sockets — Ratchet and Socket Sets
Fractional Socket Set, 11 Piece, 3/8 inch Drive - 9S-1746 (Cont'd.)
Size Length Part Number Description
– – 9S-1746 Socket Set
Sockets Set consists of:
1/2 in 23.8 mm (0.94 in) 8H-8568 Socket
11/16 in 27 mm (1.06 in) 9S-1728 Socket
3/4 in 27.8 mm (1.09 in) 8H-8571 Socket
3/8 in 23 mm (0.91 in) 8S-2274 Socket
5/8 in 26.2 mm (1.03 in) 8H-8570 Socket
7/16 in 23 mm (0.91 in) 8H-8567 Socket
9/16 in 24.6 mm (0.97 in) 8H-8569 Socket
Accessories included
152.4 mm (6.00 in) long 152.4 mm (6 in) 8H-8575 Extension Assembly
3/8 in 447.5 mm (17.62 in) 8H-8573 Speeder Handle
3/8 in 187.5 mm (7.38 in) 239-6824 Reversible Ratchet, 3/8 in Drive
76.2 mm (3.00 in) long 76.2 mm (3 in) 8H-8574 Socket Extension

Fractional Socket Set, 16 Piece, 1/2 inch Drive - 9S-1748

Warranty: Lifetime
• 12 point
• 1/2 inch square drive
• Chrome finish
• Can be ordered by set or individually

Part
Size Length Number Description
– – 9S-1748 Socket Set
Socket Set Consists of:
1 1/16 in 41.3 mm (1.63 in) 9S-1729 Socket
1 1/4 in 47.6 mm (1.87 in) 9S-1731 Socket
1 1/8 in 44.5 mm (1.75 in) 9S-1730 Socket
1 in 38.1 mm (1.50 in) 8H-8556 Socket, 1 in
1/2 in 38.1 mm (1.50 in) 1S-0259 Socket
11/16 in 38.1 mm (1.50 in) 8H-8551 Socket
13/16 in 38.1 mm (1.50 in) 8H-8553 Socket
15/16 in 38.1 mm (1.50 in) 8H-8555 Socket
3/4 in 38.1 mm (1.50 in) 8H-8552 Socket
5/8 in 38.1 mm (1.50 in) 8H-8550 Socket
7/8 in 38.1 mm (1.50 in) 8H-8554 Socket
9/16 in 38.1 mm (1.50 in) 8H-8549 Socket
Accessories Included
1/2 in 381.0 mm (15 in) 239-6826 Reversible Ratchet

56
 Ratchets and Sockets — Ratchet and Socket Sets
Fractional Socket Set, 16 Piece, 1/2 inch Drive - 9S-1748 (Cont'd.)
Part
Size Length Number Description
1/2 in 457.2 mm (18 in) 168-0383 Breaker Bar
1/2 in drive, 127.0 mm 127.0 mm (5 in) 9S-1732 Extension – 127 mm
(5.00 in) long (5.0 in) Long (1/2 in
Drive)
1/2 in drive, 254.0 mm 279.0 mm (10.98 8H-8559 Socket Extension
(10.00 in) long in)

Fractional Socket Set, 21 Piece, 3/4 inch Drive - 9S-1749

Warranty: Lifetime
• 12 point
• 3/4 inch drive
• Chrome finish
• Can be ordered by set or individually

Size Length Part Number Description

– – 9S-1749 Socket Set
Socket Set Consists of:
1 1/16 in 54.0 mm (2.13 in) 8H-8533 Socket
1 1/2 in 63.5 mm (2.50 in) 8H-8537 Socket
1 1/4 in 57.2 mm (2.25 in) 8H-8535 Socket
1 1/8 in 55.5 mm (2.19 in) 8H-8534 Socket
1 11/16 in 69.9 mm (2.75 in) 8H-8538 Socket
1 3/4 in 69.9 mm (2.75 in) 8H-8540 Socket
1 5/16 in 58.7 mm (2.31 in) 8H-8536 Socket
1 5/8 in 66.7 mm (2.63 in) 8H-8539 Socket
1 7/8 in 79.4 mm (3.13 in) 8H-8541 Socket
1 in 52.4 mm (2.06 in) 8H-8532 Socket
15/16 in 50.8 mm (2 in) 8H-8531 Socket
2 1/4 in 82.6 mm (3.25 in) 8H-8504 Socket
2 1/8 in 82.6 mm (3.25 in) 8H-8543 Socket
2 3/16 in 82.6 mm (3.25 in) 8H-8544 Socket
2 in 79.4 mm (3.13 in) 8H-8542 Socket
3/4 in 50.8 mm (2 in) 8H-8529 Socket
7/8 in 50.8 mm (2 in) 8H-8530 Socket
Accessories Included
– 489.0 mm (19.25 in) 162-8716 Ratchet Head
Handle
203.2 mm (8.00 in) 203.2 mm (8 in) 8H-8548 Socket Extension
long

57
Ratchets and Sockets — Ratchet and Socket Sets
Fractional Socket Set, 21 Piece, 3/4 inch Drive - 9S-1749 (Cont'd.)
Size Length Part Number Description
3/4 in – 160-6389 Reversible Ratchet
Head
3/4 in 93.6 mm (3.69 in) 8H-8546 Breaker Bar Head

Fractional Heavy-Duty Socket Set, 17 Piece, 1 inch Drive - 5S-6093

Warranty: See individual part number
• 6 point
• 1 inch square drive
• Black oxide finish
• Can be ordered by set or individually

Size Length Part Number Description

– – 5S-6093 Socket Set (3)
Heavy-Duty Socket Set Consists of:
2 1/2 in (4) 104.8 mm (4.13 in) 5S-6078 Socket
2 3/4 in (4) 114.3 mm (4.50 in) 5S-6080 Socket
2 3/8 in Hex 98.4 mm (3.87 in) 5S-6077 Socket
2 5/8 in (4) 57.2 mm (2.25 in) 5S-6079 Socket
3 1/2 in (4) 133.4 mm (5.25 in) 5S-6084 Socket
3 1/4 in (4) 127 mm (5 in) 5S-6083 Socket
3 1/8 in (4) 127 mm (5 in) 5S-6082 Socket
3 3/4 in (4) 136.5 mm (5.37 in) 5S-6086 Socket
3 5/8 in (4) 133.4 mm (5.25 in) 5S-6085 Socket
3 in 123.8 mm (4.87 in) 5S-6081 Socket
4 in (4) 127 mm (5 in) 5S-6087 Socket
Accessories Included
– – 161-3983 Ratchet Head (5)
– – 5S-6088 Sledge Socket
Wrench
– – 5S-6090 Sliding T Wrench
Head
– 736.6 mm (29 in) 5S-6089 Wrench Handle
– 788.67 mm (31.05 5S-6092 Tool Box (6)
in)
203.2 mm (8.00 in) 203.2 mm (8 in) 5S-6076 Socket Extension

3 Warranty: Lifetime
4 Chrome Finish
5 161-3985 Repair Kit (5S-6094 Repair Kit is available for former 5S-6091 Ratchet Head)
6 Warranty: Manufacturer, 90 Day

58
 Ratchets and Sockets — Ratchet and Socket Sets
Metric Ratchet Set, 17 Piece, 1/4 inch Drive - 233-1642
Warranty: Lifetime
• Socket contacts the fastener on the flats rather than on the corners, preventing
rounding of the fastener and allowing for more torque to be applied
• Concentric or uniform wall thickness eliminates weak spots while allowing for a
thin wall design for greater accessibility
• Creates positive engagement with the drive tool for a tight/slop-free driving sys-
tem. Detents are located on all four inner walls ensuring positive engagement
with the drive tool in any orientation.
• Hex and drive ends of the socket are countersunk or funnel-shaped, making en-
gagement with the fastener or drive tool quicker and easier
• Nickel chrome plating provides a durable, corrosion resistant coating and a bril-
liant tool finish

Size Length Part Number Description

– – 233-1642 Metric Ratchet Set
Metric Ratchet Set Consists of:
1/4 in – 9S-1724 Universal Joint
1/4 in 112.3 mm (4.42 in) 9U-6635 Ratchet
10.0 mm 22.2 mm (0.87 in) 200-8423 Socket (1/4 in Drive)
101.6 mm (4.00 in) 101.6 mm (4 in) 9S-1721 Extension
11.0 mm 22.2 mm (0.87 in) 200-8424 Socket (1/4 in Drive)
12.0 mm 22.2 mm (0.87 in) 200-8426 Socket (1/4 in Drive)
13.0 mm 22.2 mm (0.87 in) 200-8427 Socket (1/4 in Drive)
14.0 mm 22.2 mm (0.87 in) 200-8428 Socket (1/4 in Drive)
15.0 mm 23.0 mm (0.91 in) 200-8429 Socket (1/4 in Drive)
4.0 mm 22.2 mm (0.87 in) 200-8415 Socket (1/4 in Drive)
5.0 mm 22.2 mm (0.87 in) 200-8417 Socket (1/4 in Drive)
5.5 mm 22.2 mm (0.87 in) 200-8418 Socket (1/4 in Drive)
50.8 m (2.00 in) 50.8 mm (2 in) 9S-1720 Socket Extension
6.0 mm 22.2 mm (0.87 in) 200-8419 Socket (1/4 in Drive)
7.0 mm 22.2 mm (0.87 in) 200-8420 Socket (1/4 in Drive)
8.0 mm 22.2 mm (0.87 in) 200-8421 Socket (1/4 in Drive)
9.0 mm 22.2 mm (0.87 in) 200-8422 Socket (1/4 in Drive)

59
Ratchets and Sockets — Ratchets and Repair Kits
Ratchet Set, 3 Piece - 233-1637
Warranty: Lifetime
• Sealed heads protect internal components from outside environment which leads
to longer product life and reduced maintenance, and prevents gear slippage
• Heads forged to exact tolerances for longer tool life and greater head strength
• High strength internal mechanism provides longer tool life
• Ergonomic handle reduces user fatigue and has a more comfortable grip
• Reverse lever can be shifted with one hand which saves time when the gear
mechanism needs to be reversed in tight places
• Square drive is close to the end of the head, giving maximum accessibility to fas-
teners in restricted areas
• Nickel chrome plating provides a durable, corrosion resistant coating and a bril-
liant tool finish

Part Smallest Working

Number Description Drive Length Arc Repair Kit
233-1637 Ratchet Set – – – –
Ratchet Set Consists of:
239-6823 Reversible 1/4 in 112.3 12.0 Degrees 230-0812
Ratchet mm
(4.42 in)
239-6824 Reversible 3/8 in 187.5 12.0 Degrees 230-0813
Ratchet, 3/8 in mm
Drive (7.38 in)
239-6825 Ratchet (1/2 in 1/2 in 261.9 10.0 Degrees 214-7339
Drive) mm
(10.31
in)

Ratchets
Warranty: Lifetime except ratchet 214-7340
• Sealed heads protect internal components from outside environment which leads
to longer product life and reduced maintenance, and prevents gear slippage
• Heads forged to exact tolerances for longer tool life and greater head strength
• High strength internal mechanism provides longer tool life
• Ergonomic handle reduces user fatigue and has a more comfortable grip
• Reverse lever can be shifted with one hand which saves time when the gear
mechanism needs to be reversed in tight places
• Square drive is close to the end of the head, giving maximum accessibility to fas-
teners in restricted areas
• Nickel chrome plating provides a durable, corrosion resistant coating and a bril-
liant tool finish

60
 Ratchets and Sockets — Ratchets and Repair Kits
Ratchets (Cont'd.)
Smallest Working
Part Number Description Size Length Arc Repair Kit
194-4944 (1) Ratchet 3/8 260.4 mm 5.0 Degrees –
(10.25 in)
214-7340 (2) Ratchet (3) 1/2 287.3 mm 4.5 Degrees 214-7341
(11.31 in)
239-6823 Reversible 1/4 112.3 mm (4.42 12.0 Degrees 230-0812
Ratchet in)
239-6824 Reversible Ratch- 3/8 187.5 mm (7.38 12.0 Degrees 230-0813
et, 3/8 in Drive in)
239-6825 Ratchet (1/2 in 1/2 261.9 mm 10.0 Degrees 214-7339
Drive) (10.31 in)
239-6826 Reversible 1/2 381.0 mm (15 10.0 Degrees 214-7339
Ratchet in)
263-3341 (4) Ratchet 1/2 448.6 mm 10.0 Degrees 214-7339
(17.66 in)
Repair Kits for Discontinued Ratchets
214-7333 Flex Head – – – 214-7339
Ratchet
5P-7443 Ratchet – – – 5P-7444 (20
tooth gear) 5P-
7445 (30 tooth
gear)
8H-8557 Ratchet – – – 4S-7326
9U-6635 Ratchet – 112.3 mm (4.42 – 9U-6636 (30
in) tooth gear)
9U-6637 Ratchet – – – 9U-6638 (30
tooth gear)
9U-6639 Ratchet – – – 9U-6640 (32
tooth gear)

Ratchet Heads
Warranty: Lifetime
Smallest
Part Working
Number(5) Size Head Width Head Length Head Depth Arc Repair Kit
160-6389 3/4 in 63.0 mm (2.48 in) 150.9 mm (5.94 in) 31.2 mm (1.23 in) 11.2 160-6390
Degrees
161-3983 1 in 79.4 mm (3.12 in) 200.0 mm (7.86 in) 38.1 mm (1.50 in) 12.0 161-3985
Degrees

1 Offset round swivel head

2 Round head
3 Warranty: Six Months
4 Long flex handle
5 Note: 5S-6081 Ratchet Repair Kit is available for discontinued 8H-8545 Ratchet Head;
5S-6094 Ratchet Repair Kit is available for discontinued 5S-6091 Ratchet Head.

61
Ratchets and Sockets — Ratchet Handles and Breaker Bars
Handles
Warranty: Lifetime
Part Number Drive Length
162-8716 3/4 in 489 mm (19.25 in)
5S-6089 1 in 736.6 mm (29 in)

Head Breaker Bar, 3/4 inch Drive - 8H-8546

Warranty: Lifetime
Part Number Drive Length Width
8H-8546 3/4 in 93.6 mm (3.69 in) 42.1 mm (1.66 in)

Breaker Bars
Warranty: Lifetime
Part Number Drive Length Repair Kit
168-0383 1/2 in 457.2 mm (18 in) 293-0712
214-7316 1/4 in 152.4 mm (6 in) –
214-7326 3/8 in 242.9 mm (9.56 in) –
450-9220 3/4 in 914 mm (35.98 in) –
386-3264 1 in 868 mm (34.17 in) –
386-3254 1 1/2 in 914 mm (35.98 in) –

Sliding T-Handle
Warranty: Lifetime
Part Number Drive Length
213-1985 1/2 in 304.8 mm (12 in)
214-7319 1/4 in 114.3 mm (4.50 in)
386-3359 3/4 in 450 mm (19.25 in)

62
 Ratchets and Sockets — Ratchet Handles and Breaker Bars
Sliding "T" Wrench Head - 5S-6090
Warranty: Lifetime
Part Number Drive Description Use
5S-6090 1 in Sliding T Wrench 5S-6089 Handle
Head

Speeder Handle, 3/8 inch Drive - 8H-8573

Warranty: Lifetime
Part Number Drive Length
8H-8573 3/8 in 447.5 mm (17.62 in)

Hand Impact Wrench - 5P-2410

Warranty: Caterpillar Standard Warranty, 6 Months
• Loosen nuts bound by corrosion and tighten nuts to an estimated torque value
readily with this impact wrench
• Particularly suited to field use because an air or electric power source is not
required
• With a 1 inch square drive and capacity up to 2000 ft-lb torque, the wrench will
handle 3/4 inch to 1 3/4 inch bolts
• Wrench action provides impact torque in one direction and free ratcheting in the
other
• When turned about 30°, energy stored in a heavy spring in the handle is suddenly
released, delivering a torsional impact to the square output drive through a link
and rotary hammer arrangement. To reverse the direction of this action, the
wrench is merely turned over. The amount of impact is adjustable.
Part Number Description
5P-2410 Hand Impact Wrench
Hand Impact Replacement Parts
1A-2209 Bolt
1H-8134 Ring

63
Ratchets and Sockets — Cat Sockets - 3/8 inch Drive
Fractional Socket Set, 7 Piece, 3/8 inch Drive - 214-1143
Warranty: Lifetime
• 6 point
• 3/8 inch square drive
• Standard length sockets
• Chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-1143 Socket Set 9/16 in 26.2 mm (1.03 in) 214-1147 Socket
Socket Set Consists of: 5/8 in 27.7 mm (1.09 in) 214-1148 Socket
3/8 in 23.1 mm (0.91 in) 214-1144 Socket 11/16 in 28.7 mm (1.13 in) 214-1149 Socket
7/16 in 23.1 mm (0.91 in) 214-1145 Socket 3/4 in 30.2 mm (1.19 in) 214-1150 Socket
1/2 in 23.9 mm (0.94 in) 214-1146 Socket

Fractional Socket Set, 9 Piece, 3/8 inch Drive - 214-1151

Warranty: See individual part number
• 6 point
• 3/8 inch square drive
• Deep length sockets
• Polished chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-1151 Socket Set 5/8 in 60.3 mm (2.37 in) 214-1156 Socket
Socket Set Consists of: 11/16 in 66.7 mm (2.63 in) 214-1157 Socket
3/8 in 54.0 mm (2.13 in) 214-1152 Socket 3/4 in 66.7 mm (2.63 in) 214-1158 Socket
7/16 in 54.0 mm (2.13 in) 214-1153 Socket 13/16 in 69.9 mm (2.75 in) 214-1159 Socket
1/2 in 60.3 mm (2.37 in) 214-1154 Socket 7/8 in 69.9 mm (2.75 in) 214-1160 Socket
9/16 in 60.3 mm (2.37 in) 214-1155 Socket

64
 Ratchets and Sockets — Cat Sockets - 3/8 inch Drive
Fractional Socket Set, 9 Piece, 3/8 inch Drive - 214-6490
Warranty: Lifetime
• 12 point
• 3/8 inch square drive
• Deep length sockets
• Chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-6490 Socket Set 5/8 in 60.5 mm (2.38 in) 9S-5031 (1) Deep Well Socket
3/8 in 54.1 mm (2.13 in) 214-6491 Socket 11/16 in 66.8 mm (2.63 in) 214-6494 Socket
7/16 in 54.1 mm (2.13 in) 214-6492 Socket 3/4 in 66.8 mm (2.63 in) 214-6495 Socket
1/2 in 60.5 mm (2.38 in) 214-6493 Socket 13/16 in 69.9 mm (2.75 in) 214-6496 Socket
9/16 in 60.5 mm (2.38 in) 8S-2357 Deep Well Socket 7/8 in 69.9 mm (2.75 in) 6V-0199 Socket

Metric Socket Set, 12 Piece, 3/8 inch Drive - 194-3574

Warranty: Lifetime
• 12 point
• 3/8 inch drive
• Standard length sockets
• Polished chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Part Part
Size Length Number Description Size Length Number Description
– – 194-3574 3/8 Drive, 12 Point 13.0 mm 24.6 mm (0.97 in) 194-3494 Socket (3/8 in Drive)
Metric Socket Set, 14.0 mm 26.2 mm (1.03 in) 194-3495 Socket (3/8 in Drive)
12-piece
15.0 mm 27.0 mm (1.06 in) 194-3496 Socket (3/8 in Drive)
Socket Set Consists of:
16.0 mm 27.8 mm (1.09 in) 194-3497 Socket (3/8 in Drive)
8.0 mm 23.0 mm (0.91 in) 194-3480 Socket (3/8 in Drive)
17.0 mm 28.6 mm (1.13 in) 194-3498 Socket (3/8 in Drive)
9.0 mm 23.0 mm (0.91 in) 194-3483 Socket (3/8 in Drive)
18.0 mm 28.6 mm (1.13 in) 194-3499 Socket (3/8 in Drive)
10.0 mm 23.0 mm (0.91 in) 194-3488 Socket (3/8 in Drive)
19.0 mm 30.2 mm (1.19 in) 194-3500 Socket (3/8 in Drive)
11.0 mm 23.0 mm (0.91 in) 194-3490 Socket (3/8 in Drive)
12.0 mm 23.8 mm (0.94 in) 194-3492 Socket (3/8 in Drive)

1 Comes with insert for removing spark plugs

65
Ratchets and Sockets — Cat Sockets - 3/8 inch Drive
Metric Socket Set, 12 Piece, 3/8 inch Drive - 199-9019
Warranty: Lifetime
• 12 point
• 3/8 inch drive
• Deep length sockets
• Polished chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Part Part
Size Length Number Description Size Length Number Description
– – 199-9019 Metric Socket Set 13.0 mm 54.0 mm (2.13 in) 199-9029 Socket (3/8 in Drive)
Socket Set Consists of: 14.0 mm 60.3 mm (2.37 in) 199-9030 Socket (3/8 in Drive)
8.0 mm 54.0 mm (2.13 in) 199-9023 Socket (3/8 in Drive) 15.0 mm 60.3 mm (2.37 in) 199-9031 Socket (3/8 in Drive)
9.0 mm 54.0 mm (2.13 in) 199-9025 Socket (3/8 in Drive) 16.0 mm 60.3 mm (2.37 in) 199-9032 Socket (3/8 in Drive)
10.0 mm 54.0 mm (2.13 in) 199-9026 Socket (3/8 in Drive) 17.0 mm 66.7 mm (2.63 in) 199-9033 Socket (3/8 in Drive)
11.0 mm 54.0 mm (2.13 in) 199-9027 Socket (3/8 in Drive) 18.0 mm 66.7 mm (2.63 in) 199-9034 Socket (3/8 in Drive)
12.0 mm 54.0 mm (2.13 in) 199-9028 Socket (3/8 in Drive) 19.0 mm 66.7 mm (2.63 in) 199-9035 Socket (3/8 in Drive)

Metric Socket Set, 12 Piece, 3/8 inch Drive - 214-6620

Warranty: Lifetime
• 6 point
• 3/8 inch drive
• Standard length sockets
• Chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-6620 Metric Socket Set 13.0 mm 24.6 mm (0.97 in) 214-6627 Socket (3/8 in Drive)
Socket Set Consists of: 14.0 mm 26.2 mm (1.03 in) 214-6628 Socket (3/8 in Drive)
8.0 mm 23.0 mm (0.91 in) 214-6621 Socket (3/8 in Drive) 15.0 mm 27.0 mm (1.06 in) 214-6629 Socket (3/8 in Drive)
9.0 mm 23.0 mm (0.91 in) 214-6623 Socket (3/8 in Drive) 16.0 mm 27.8 mm (1.09 in) 214-6630 Socket (3/8 in Drive)
10.0 mm 23.0 mm (0.91 in) 214-6624 Socket (3/8 in Drive) 17.0 mm 28.6 mm (1.13 in) 214-6631 Socket (3/8 in Drive)
11.0 mm 23.0 mm (0.91 in) 214-6625 Socket 18.0 mm 28.6 mm (1.13 in) 214-6632 Socket (3/8 in Drive)
12.0 mm 23.8 mm (0.94 in) 214-6626 Socket (3/8 in Drive) 19.0 mm 30.2 mm (1.19 in) 214-6633 Socket (3/8 in Drive)

66
 Ratchets and Sockets — Cat Sockets - 3/8 inch Drive
Metric Socket Set, 8 Piece, 3/8 inch Drive - 214-6634
Warranty: Lifetime
• 6 point
• 3/8 inch drive
• Deep length sockets
• Polished chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-6634 Metric Socket Set 13.0 mm 54.0 mm (2.13 in) 214-6638 Socket (3/8 in Drive)
Socket Set Consists of: 14.0 mm 60.3 mm (2.37 in) 214-6639 Socket (3/8 in Drive)
10.0 mm 54.0 mm (2.13 in) 214-6635 Socket (3/8 in Drive) 15.0 mm 60.3 mm (2.37 in) 214-6640 Socket (3/8 in Drive)
11.0 mm 54.0 mm (2.13 in) 214-6636 Socket (3/8 in Drive) 17.0 mm 66.7 mm (2.63 in) 214-6641 Socket (3/8 in Drive)
12.0 mm 54.0 mm (2.13 in) 214-6637 Socket (3/8 in Drive) 19.0 mm 66.7 mm (2.63 in) 214-6642 Socket (3/8 in Drive)

67
Ratchets and Sockets — Cat Sockets - 1/4 inch Drive
Fractional Socket Set, 10 Piece, 1/4 inch Drive - 213-9965
Warranty: Lifetime
• 6 point
• 1/4 inch square drive
• Deep length sockets
• Chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 213-9965 Socket Set 5/16 in 50.8 mm (2 in) 213-9971 Socket
Socket Set Consists of: 11/32 in 50.8 mm (2 in) 213-9972 Socket
3/16 in 50.8 mm (2 in) 213-9967 Socket 3/8 in 50.8 mm (2 in) 213-9974 Socket
7/32 in 50.8 mm (2 in) 213-9968 Socket 7/16 in 50.8 mm (2 in) 213-9978 Socket
1/4 in 50.8 mm (2 in) 213-9969 Socket 1/2 in 50.8 mm (2 in) 213-9980 Socket
9/32 in 50.8 mm (2 in) 213-9970 Socket 9/16 in 50.8 mm (2 in) 213-9981 Socket

Metric Socket Set, 13 Piece, 1/4 inch Drive - 200-8413

Warranty: Lifetime
• 6 point
• 1/4 inch drive
• Standard length sockets
• Polished chrome finish
• Includes socket bar and clips

Part Part
Size Length Number Description Size Length Number Description
– – 200-8413 Metric Socket Set 9.0 mm 22.2 mm (0.87 in) 200-8422 Socket (1/4 in Drive)
Socket Set Consists of: 10.0 mm 22.2 mm (0.87 in) 200-8423 Socket (1/4 in Drive)
4.0 mm 22.2 mm (0.87 in) 200-8415 Socket (1/4 in Drive) 11.0 mm 22.2 mm (0.87 in) 200-8424 Socket (1/4 in Drive)
5.0 mm 22.2 mm (0.87 in) 200-8417 Socket (1/4 in Drive) 12.0 mm 22.2 mm (0.87 in) 200-8426 Socket (1/4 in Drive)
5.5 mm 22.2 mm (0.87 in) 200-8418 Socket (1/4 in Drive) 13.0 mm 22.2 mm (0.87 in) 200-8427 Socket (1/4 in Drive)
6.0 mm 22.2 mm (0.87 in) 200-8419 Socket (1/4 in Drive) 14.0 mm 22.2 mm (0.87 in) 200-8428 Socket (1/4 in Drive)
7.0 mm 22.2 mm (0.87 in) 200-8420 Socket (1/4 in Drive) 15.0 mm 23.0 mm (0.91 in) 200-8429 Socket (1/4 in Drive)
8.0 mm 22.2 mm (0.87 in) 200-8421 Socket (1/4 in Drive)

68
 Ratchets and Sockets — Cat Sockets - 1/4 inch Drive
Metric Socket Set, 9 Piece, 1/4 inch Drive - 194-3578
Warranty: Lifetime
• 6 point
• 1/4 inch drive
• Deep length sockets
• Polished chrome finish
• Includes socket bar and clips

Size Length Part Number Description Size Length Part Number Description
– – 194-3578 Metric Socket Set 10.0 mm 50.8 mm (2 in) 194-3523 Socket (1/4 in Drive)
Socket Set Consists of: 11.0 mm 50.8 mm (2 in) 194-3527 Socket (1/4 in Drive)
6.0 mm 50.8 mm (2 in) 194-3518 Socket (1/4 in Drive) 12.0 mm 50.8 mm (2 in) 194-3528 Socket (1/4 in Drive)
7.0 mm 50.8 mm (2 in) 194-3519 Socket (1/4 in Drive) 13.0 mm 50.8 mm (2 in) 194-3529 Socket (1/4 in Drive)
8.0 mm 50.8 mm (2 in) 194-3521 Socket (1/4 in Drive) 14.0 mm 50.8 mm (2 in) 194-3530 Socket (1/4 in Drive)
9.0 mm 50.8 mm (2 in) 194-3522 Socket (1/4 in Drive)

69
Ratchets and Sockets — Cat Sockets - 1/2 inch Drive
Fractional Socket Set, 12 Piece, 1/2 inch Drive - 214-6498
Warranty: Lifetime
• 6 point
• 1/2 inch square drive
• Standard length sockets
• Chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-6498 Socket Set 13/16 in 38.1 mm (1.50 in) 214-6509 Socket
Socket Set Consists of: 15/16 in 38.9 mm (1.53 in) 214-6511 Socket
1 1/16 in 42.9 mm (1.69 in) 214-6513 Socket 3/4 in 38.1 mm (1.50 in) 214-6507 Socket
1 1/8 in 44.5 mm (1.75 in) 214-6514 Socket 5/8 in 38.1 mm (1.50 in) 214-6504 Socket
1 in 39.7 mm (1.56 in) 214-6512 Socket 7/16 in 38.1 mm (1.50 in) 214-6500 Socket
1/2 in 38.1 mm (1.50 in) 214-6501 Socket 7/8 in 38.1 mm (1.50 in) 214-6510 Socket
11/16 in 38.1 mm (1.50 in) 214-6506 Socket 9/16 in 38.1 mm (1.50 in) 214-6503 Socket

Fractional Deep Well Socket Set, 9 Piece, 1/2 inch Drive - 2P-5490
Warranty: Lifetime
• 6 point
• 1/2 inch square drive
• Chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 2P-5490 Deep Well 11/16 in 82.6 mm (3.25 in) 2P-5478 Socket
Socket Set 3/4 in 82.6 mm (3.25 in) 2P-5479 Socket
Deep Well Socket Set Consists of: 13/16 in 82.6 mm (3.25 in) 2P-5481 Spark Plug Wrench
1/2 in 82.6 mm (3.25 in) 2P-5475 Socket 7/8 in 82.6 mm (3.25 in) 2P-5482 Socket
9/16 in 82.6 mm (3.25 in) 2P-5476 Socket 15/16 in 82.6 mm (3.25 in) 2P-5483 Socket
5/8 in 82.6 mm (3.25 in) 2P-5477 Socket 1 in 82.6 mm (3.25 in) 2P-5484 Socket

70
 Ratchets and Sockets — Cat Sockets - 1/2 inch Drive
Fractional Socket Set, 11 Piece, 1/2 inch Drive - 214-1161
Warranty: Lifetime
• 12 point
• 1/2 inch square drive
• Deep length sockets
• Polished chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-1161 Socket Set 13/16 in 82.6 mm (3.25 in) 214-1167 Socket
Socket Set Consists of: 7/8 in 82.6 mm (3.25 in) 214-1168 Socket
1/2 in 82.6 mm (3.25 in) 214-1162 Socket 15/16 in 82.6 mm (3.25 in) 214-1169 Socket
9/16 in 82.6 mm (3.25 in) 214-1163 Socket 1 in 82.6 mm (3.25 in) 214-1170 Socket
5/8 in 82.6 mm (3.25 in) 214-1164 Socket 1 1/16 in 82.6 mm (3.25 in) 214-1171 Socket
11/16 in 82.6 mm (3.25 in) 214-1165 Socket 1 1/8 in 82.6 mm (3.25 in) 214-1172 Socket
3/4 in 82.6 mm (3.25 in) 214-1166 Socket

Metric Socket Set, 13 Piece, 1/2 inch Drive - 199-6156

Warranty: Lifetime
• 12 point
• 1/2 inch drive
• Standard length sockets
• Polished chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Part Part
Size Length Number Description Size Length Number Description
– – 199-6156 Metric Socket Set 18.0 mm 38.1 mm (1.50 in) 6V-9113 Socket (1/2 in Drive)
Socket Set Consists of: 19.0 mm 38.1 mm (1.50 in) 6V-9114 Socket (1/2 in Drive)
12.0 mm 38.1 mm (1.50 in) 199-6149 Socket (1/2 in Drive) 20.0 mm 38.1 mm (1.50 in) 199-6152 Socket (1/2 in Drive)
13.0 mm 38.1 mm (1.50 in) 199-6150 Socket (1/2 in Drive) 21.0 mm 38.1 mm (1.50 in) 6V-9115 Socket (1/2 in Drive)
14.0 mm 38.1 mm (1.50 in) 8T-3041 Socket (1/2 in Drive) 22.0 mm 38.1 mm (1.50 in) 6V-9116 Socket (1/2 in Drive)
15.0 mm 38.1 mm (1.50 in) 6V-9110 Socket (1/2 in Drive) 23.0 mm 38.1 mm (1.50 in) 199-6153 Socket (1/2 in Drive)
16.0 mm 38.1 mm (1.50 in) 6V-9111 Socket (1/2 in Drive) 24.0 mm 38.1 mm (1.50 in) 199-6154 Socket (1/2 in Drive)
17.0 mm 38.1 mm (1.50 in) 6V-9112 Socket (1/2 in Drive)

71
Ratchets and Sockets — Cat Sockets - 1/2 inch Drive
Metric Socket Set, 10 Piece, 1/2 inch Drive - 194-3576
Warranty: Lifetime
• 12 point
• 1/2 inch drive
• Deep length sockets
• Polished chrome finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 194-3576 Metric Socket Set 20.0 mm 82.6 mm (3.25 in) 194-3512 Socket (1/2 in Drive)
Socket Set Consists of: 21.0 mm 82.6 mm (3.25 in) 194-3513 Socket (1/2 in Drive)
16.0 mm 82.6 mm (3.25 in) 194-3505 Socket (1/2 in Drive) 22.0 mm 82.6 mm (3.25 in) 194-3514 Socket (1/2 in Drive)
17.0 mm 82.6 mm (3.25 in) 194-3506 Socket (1/2 in Drive) 24.0 mm 82.6 mm (3.25 in) 194-3515 Socket (1/2 in Drive)
18.0 mm 82.6 mm (3.25 in) 194-3510 Socket (1/2 in Drive) 25.0 mm 82.6 mm (3.25 in) 194-3516 Socket (1/2 in Drive)
19.0 mm 82.6 mm (3.25 in) 194-3511 Socket (1/2 in Drive) 26.0 mm 82.6 mm (3.25 in) 194-3517 Socket (1/2 in Drive)

72
 Ratchets and Sockets — Impact Socket Sets - 3/8 inch Drive
Fractional Impact Socket Set, 12 Piece, 3/8 inch Drive - 271-4600
Warranty: Lifetime
• 6 point
• 3/8 inch drive
• Standard length sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 271-4600 Impact Socket Set 5/8 in 23.8 mm (0.94 in) 271-4606 Socket
Impact Socket Set Consists of: 11/16 in 26.2 mm (1.03 in) 271-4607 Socket
5/16 in 22.2 mm (0.87 in) 271-4601 Socket 3/4 in 26.2 mm (1.03 in) 271-4608 Socket
3/8 in 23.8 mm (0.94 in) 271-4602 Socket 13/16 in 30.2 mm (1.19 in) 271-4609 Socket
7/16 in 23.8 mm (0.94 in) 271-4603 Socket 7/8 in 32.5 mm (1.28 in) 271-4610 Socket
1/2 in 23.8 mm (0.94 in) 271-4604 Socket 15/16 in 33.3 mm (1.31 in) 271-4611 Socket
9/16 in 23.8 mm (0.94 in) 271-4605 Socket 1 in 25.4 mm (1 in) 271-4612 Socket

Fractional Impact Socket Set, 7 Piece, 3/8 inch Drive - 271-4613

Warranty: Lifetime
• 12 point
• 3/8 inch drive
• Standard length sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 271-4613 Impact Socket Set 9/16 in 23.8 mm (0.94 in) 271-4618 Socket
Impact Socket Set Consists of: 5/8 in 23.8 mm (0.94 in) 271-4619 Socket
3/8 in 22.2 mm (0.87 in) 271-4615 Socket 11/16 in 26.2 mm (1.03 in) 271-4620 Socket
7/16 in 23.8 mm (0.94 in) 271-4616 Socket 3/4 in 26.2 mm (1.03 in) 271-4621 Socket
1/2 in 23.8 mm (0.94 in) 271-4617 Socket

73
Ratchets and Sockets — Impact Socket Sets - 3/8 inch Drive
Fractional Impact Socket Set, 12 Piece, 3/8 inch Drive - 271-4669
Warranty: Lifetime
• 6 point
• 3/8 inch drive
• Deep length sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 271-4669 Impact Socket Set 5/8 in 60.3 mm (2.37 in) 271-4675 Socket
Impact Socket Set Consists of: 11/16 in 74.6 mm (2.94 in) 271-4676 Socket
5/16 in 54.0 mm (2.13 in) 271-4670 Socket 3/4 in 69.9 mm (2.75 in) 271-4677 Socket
3/8 in 54.0 mm (2.13 in) 271-4671 Socket 13/16 in 69.9 mm (2.75 in) 271-4678 Socket
7/16 in 54.0 mm (2.13 in) 271-4672 Socket 7/8 in 69.9 mm (2.75 in) 271-4679 Socket
1/2 in 54.0 mm (2.13 in) 271-4673 Socket 15/16 in 69.9 mm (2.75 in) 271-4680 Socket
9/16 in 60.3 mm (2.37 in) 271-4674 Socket 1 in 69.9 mm (2.75 in) 271-4681 Socket

Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4622

Warranty: Lifetime
• 6 point
• 3/8 inch drive
• Standard length sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 271-4622 Impact Socket Set 14.0 mm 27 mm (1.06 in) 271-4630 Socket (3/8 in Drive)
Socket Set Consists of: 15.0 mm 27 mm (1.06 in) 271-4631 Socket (3/8 in Drive)
8.0 mm 23 mm (0.91 in) 271-4623 Socket (3/8 in Drive) 16.0 mm 27.8 mm (1.09 in) 271-4632 Socket (3/8 in Drive)
9.0 mm 23 mm (0.91 in) 271-4624 Socket (3/8 in Drive) 17.0 mm 28.2 mm (1.11 in) 271-4633 Socket (3/8 in Drive)
10.0 mm 23 mm (0.91 in) 271-4625 Socket (3/8 in Drive) 18.0 mm 29 mm (1.14 in) 271-4634 Socket (3/8 in Drive)
11.0 mm 23.8 mm (0.94 in) 271-4626 Socket (3/8 in Drive) 19.0 mm 30.6 mm (1.20 in) 271-4635 Socket (3/8 in Drive)
12.0 mm 23.8 mm (0.94 in) 271-4627 Socket (3/8 in Drive) 21.0 mm 29.5 mm (1.16 in) 271-4636 Socket (3/8 in Drive)
13.0 mm 24.6 mm (0.97 in) 271-4628 Socket (3/8 in Drive) 24.0 mm 33 mm (1.30 in) 271-4637 Socket (3/8 in Drive)

74
 Ratchets and Sockets — Impact Socket Sets - 3/8 inch Drive
Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4654
Warranty: Lifetime
• 12 point
• 3/8 inch drive
• Standard length sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 271-4654 Impact Socket Set 15.0 mm 27 mm (1.06 in) 271-4661 Socket (3/8 in Drive)
Impact Socket Set consists of: 16.0 mm 27.8 mm (1.09 in) 271-4662 Socket (3/8 in Drive)
8.0 mm 23 mm (0.91 in) 271-4655 Socket (3/8 in Drive) 17.0 mm 28.2 mm (1.11 in) 271-4663 Socket (3/8 in Drive)
10.0 mm 23 mm (0.91 in) 271-4656 Socket (3/8 in Drive) 18.0 mm 29 mm (1.14 in) 271-4664 Socket (3/8 in Drive)
11.0 mm 23.8 mm (0.91 in) 271-4657 Socket (3/8 in Drive) 19.0 mm 30.6 mm (1.20 in) 271-4665 Socket (3/8 in Drive)
12.0 mm 23.8 mm (0.94 in) 271-4658 Socket (3/8 in Drive) 20.0 mm 30.9 mm (1.22 in) 271-4666 Socket (3/8 in Drive)
13.0 mm 23.8 mm (0.94 in) 271-4659 Socket (3/8 in Drive) 21.0 mm 32.1 mm (1.26 in) 271-4667 Socket (3/8 in Drive)
14.0 mm 27 mm (1.06 in) 271-4660 Socket (3/8 in Drive) 22.0 mm 32.9 mm (1.30 in) 271-4668 Socket (3/8 in Drive)

Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4638

Warranty: Lifetime
• 6 point
• 3/8 inch drive
• Deep length sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 271-4638 Impact Socket Set 14.0 mm 60.3 mm (2.37 in) 271-4645 Socket (3/8 in Drive)
Impact Socket Set Consists of: 15.0 mm 60.3 mm (2.37 in) 271-4646 Socket (3/8 in Drive)
8.0 mm 54 mm (2.13 in) 271-4639 Socket (3/8 in Drive) 16.0 mm 60.3 mm (2.37 in) 271-4647 Socket (3/8 in Drive)
9.0 mm 54 mm (2.13 in) 271-4640 Socket (3/8 in Drive) 17.0 mm 66.7 mm (2.63 in) 271-4648 Socket (3/8 in Drive)
10.0 mm 54 mm (2.13 in) 271-4641 Socket (3/8 in Drive) 18.0 mm 66.7 mm (2.63 in) 271-4650 Socket (3/8 in Drive)
11.0 mm 54 mm (2.13 in) 271-4642 Socket (3/8 in Drive) 19.0 mm 66.7 mm (2.63 in) 271-4651 Socket (3/8 in Drive)
12.0 mm 54 mm (2.13 in) 271-4643 Socket (3/8 in Drive) 21.0 mm 66.7 mm (2.63 in) 271-4652 Socket (3/8 in Drive)
13.0 mm 54 mm (2.13 in) 271-4644 Socket (3/8 in Drive) 24.0 mm 73 mm (2.87 in) 271-4653 Socket (3/8 in Drive)

75
Ratchets and Sockets — Impact Socket Sets - 3/8 inch Drive
Metric Impact Socket Set, 14 Piece, 3/8 inch Drive - 271-4683
Warranty: Lifetime
• 12 point
• 3/8 inch drive
• Deep length sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 271-4683 Impact Socket Set 14.0 mm 60.3 mm (2.37 in) 271-4690 Socket (3/8 in Drive)
Impact Socket Set Consists of: 15.0 mm 60.3 mm (2.37 in) 271-4691 Socket (3/8 in Drive)
8.0 mm 54 mm (2.13 in) 271-4684 Socket (3/8 in Drive) 16.0 mm 60.3 mm (2.37 in) 271-4692 Socket (3/8 in Drive)
9.0 mm 54 mm (2.13 in) 271-4685 Socket (3/8 in Drive) 17.0 mm 66.7 mm (2.63 in) 271-4693 Socket (3/8 in Drive)
10.0 mm 54 mm (2.13 in) 271-4686 Socket (3/8 in Drive) 18.0 mm 66.7 mm (2.63 in) 271-4694 Socket (3/8 in Drive)
11.0 mm 54 mm (2.13 in) 271-4687 Socket (3/8 in Drive) 19.0 mm 66.7 mm (2.63 in) 271-4695 Socket (3/8 in Drive)
12.0 mm 54 mm (2.13 in) 271-4688 Socket (3/8 in Drive) 21.0 mm 66.7 mm (2.63 in) 271-4696 Socket (3/8 in Drive)
13.0 mm 54 mm (2.13 in) 271-4689 Socket (3/8 in Drive) 24.0 mm 73 mm (2.87 in) 271-4697 Socket (3/8 in Drive)

76
 Ratchets and Sockets — Impact Socket Sets - 1/2 in Square Drive
Fractional Impact Socket Set, 11 Piece 1/2 inch Drive - 213-3086
Warranty: Lifetime
• 6 point
• 1/2 inch square drive
• Standard length sockets
• Black oxide finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 213-3086 Impact Socket Set 13/16 in 38.1 mm (1.50 in) 213-3099 Socket
Impact Socket Set Consists of: 7/8 in 38.1 mm (1.50 in) 213-3102 Socket
1/2 in 38.1 mm (1.50 in) 213-3087 Socket 15/16 in 44.5 mm (1.75 in) 213-3104 Socket
9/16 in 38.1 mm (1.50 in) 213-3088 Socket 1 in 44.5 mm (1.75 in) 213-3107 Socket
5/8 in 38.1 mm (1.50 in) 213-3089 Socket 1 1/16 in 50.8 mm (2 in) 213-3109 Socket
11/16 in 38.1 mm (1.50 in) 213-3091 Socket 1 1/8 in 50.8 mm (2 in) 213-3110 Socket, 1 1/8 in
3/4 in 38.1 mm (1.50 in) 213-3094 Socket

Fractional Impact Socket Set, 12 Piece 1/2 inch Drive - 213-3515

Warranty: Lifetime
• 6 point
• 1/2 inch square drive
• Deep length sockets
• Black oxide finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 213-3515 Impact Socket Set 3/4 in 82.6 mm (3.25 in) 213-3522 Socket
Impact Socket Set Consists of: 13/16 in 82.6 mm (3.25 in) 213-3523 Socket
7/16 in 82.6 mm (3.25 in) 213-3516 Socket 7/8 in 88.9 mm (3.50 in) 213-3524 Socket
1/2 in 82.6 mm (3.25 in) 213-3517 Socket 15/16 in 88.9 mm (3.50 in) 213-3525 Socket
9/16 in 82.6 mm (3.25 in) 213-3518 Socket 1 in 88.9 mm (3.50 in) 213-3526 Socket
5/8 in 82.6 mm (3.25 in) 213-3520 Socket 1 1/16 in 88.9 mm (3.50 in) 213-3528 Socket
11/16 in 82.6 mm (3.25 in) 213-3521 Socket 1 1/8 in 88.9 mm (3.50 in) 213-3530 Socket

77
Ratchets and Sockets — Impact Socket Sets - 1/2 in Square Drive
Metric Impact Socket Set, 12 Piece 1/2 inch Drive - 213-6923
Warranty: Lifetime
• 6 point
• 1/2 inch drive
• Standard length impact sockets
• Black oxide finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 213-6923 Impact Socket Set (1/2 in Drive)
Socket Set Consists of: 16.0 mm 38.1 mm (1.50 in) 213-6933 Impact Socket
10.0 mm 38.1 mm (1.50 in) 213-6926 Impact Socket (1/2 in Drive)
(1/2 in Drive) 17.0 mm 38.1 mm (1.50 in) 213-6934 Impact Socket
11.0 mm 38.1 mm (1.50 in) 213-6927 Impact Socket (1/2 in Drive)
(1/2 in Drive) 18.0 mm 38.1 mm (1.50 in) 213-6935 Impact Socket
12.0 mm 38.1 mm (1.50 in) 213-6928 Impact Socket (1/2 in Drive)
(1/2 in Drive) 19.0 mm 38.1 mm (1.50 in) 213-6936 Impact Socket
13.0 mm 38.1 mm (1.50 in) 213-6929 Impact Socket (1/2 in Drive)
(1/2 in Drive) 20.0 mm 38.1 mm (1.50 in) 213-6924 Impact Socket
14.0 mm 38.1 mm (1.50 in) 213-6930 Impact Socket (1/2 in Drive)
(1/2 in Drive) 21.0 mm 38.1 mm (1.50 in) 213-6937 Impact Socket
15.0 mm 38.1 mm (1.50 in) 213-6932 Impact Socket (1/2 in Drive)

Metric Impact Socket Set, 11 Piece 1/2 inch Drive - 214-6643

Warranty: Lifetime
• 6 point
• 1/2 inch drive
• Deep length impact sockets
• Black oxide finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-6643 Impact Socket Set 14.0 mm 82.6 mm (3.25 in) 214-6648 Impact Socket
Impact Socket Set Consists of: (1/2 in Drive)
10.0 mm 214-6644 15.0 mm 82.6 mm (3.25 in) 214-6649 Impact Socket
82.6 mm (3.25 in) Impact Socket
(1/2 in Drive) (1/2 in Drive)
11.0 mm 214-6645 16.0 mm 82.6 mm (3.25 in) 214-6650 Impact Socket
82.6 mm (3.25 in) Impact Socket
(1/2 in Drive) (1/2 in Drive)
12.0 mm 214-6646 17.0 mm 82.6 mm (3.25 in) 214-6651 Impact Socket
82.6 mm (3.25 in) Impact Socket
(1/2 in Drive) (1/2 in Drive)
13.0 mm 214-6647 18.0 mm 82.6 mm (3.25 in) 214-6652 Impact Socket
82.6 mm (3.25 in) Impact Socket
(1/2 in Drive) (1/2 in Drive)

78
 Ratchets and Sockets — Impact Socket Sets - 1/2 in Square Drive
Metric Impact Socket Set, 11 Piece 1/2 inch Drive - 214-6643 (Cont'd.)
Size Length Part Number Description Size Length Part Number Description
19.0 mm 82.6 mm (3.25 in) 214-6653 Impact Socket 20.0 mm 82.6 mm (3.25 in) 214-7346 Impact Socket
(1/2 in Drive) (1/2 in Drive)

79
Ratchets and Sockets — Impact Socket Sets - 3/4 in Square Drive
Metric Impact Socket Set, 24 Piece 3/4 inch Drive - 9U-6547
Warranty: Lifetime
• 6 point
• 3/4 inch drive
• Standard length impact sockets
• Black oxide finish
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-6643 Impact Socket Set 31.0 mm 54 mm (2.13 in) 9U-6534 Impact Socket
Impact Socket Set Consists of: 32.0 mm 54 mm (2.13 in) 9U-6535 Impact Socket
17.0 mm 44.5 mm (1.75 in) 9U-6523 Impact Socket 33.0 mm 53.8 mm (2.12 in) 9U-6536 Impact Socket
19.0 mm 44.5 mm (1.75 in) 9U-6524 Impact Socket 34.0 mm 54 mm (2.13 in) 9U-6537 Impact Socket
20.0 mm 44.5 mm (1.75 in) 9U-6525 Impact Socket 35.0 mm 57.2 mm (2.25 in) 9U-6538 Impact Socket
21.0 mm 47.8 mm (1.88 in) 9U-6526 Impact Socket 36.0 mm 57.2 mm (2.25 in) 9U-6539 Impact Socket
22.0 mm 47.6 mm (1.87 in) 9U-6527 Impact Socket 38.0 mm 57.2 mm (2.25 in) 9U-6540 Impact Socket
23.0 mm 47.8 mm (1.88 in) 9U-6528 Impact Socket 40.0 mm 66.7 mm (2.63 in) 9U-6541 Impact Socket
24.0 mm 47.6 mm (1.87 in) 9U-6529 Impact Socket 41.0 mm 66.5 mm (2.62 in) 9U-6542 Impact Socket
26.0 mm 50.8 mm (2 in) 9U-6530 Impact Socket 42.0 mm 66.5 mm (2.62 in) 9U-6543 Impact Socket
27.0 mm 50.8 mm (2 in) 9U-6531 Impact Socket 43.0 mm 66.5 mm (2.62 in) 9U-6544 Impact Socket
28.0 mm 53.8 mm (2.12 in) 9U-6532 Impact Socket 46.0 mm 66.7 mm (2.63 in) 9U-6545 Impact Socket
30.0 mm 53.8 mm (2.12 in) 9U-6533 Impact Socket 50.0 mm 73.2 mm (2.88 in) 9U-6546 Impact Socket

80
 Universal and Swivel Socket Sets - 3/8 inch Square Drive
Fractional Universal Socket Set, 7 Piece, 3/8 inch Drive - 9S-1747
Warranty: Lifetime
• 12 point
• 3/8 inch universal drive
• Polished chrome finish
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
Universal Socket 1/2 in 42.1 mm (1.66 in) 8H-8563 Universal Socket
– – 9S-1747
Set 9/16 in 42.8 mm (1.69 in) 8H-8564 Universal Socket
Socket Set Consists of: 5/8 in 44.5 mm (1.75 in) 8H-8565 Universal Socket
3/8 in 40.1 mm (1.58 in) 8S-2284 Universal Socket
11/16 in 49.6 mm (1.95 in) 9S-1727 Universal Socket
7/16 in 40.1 mm (1.58 in) 8H-8562 Universal Socket
3/4 in 50.4 mm (1.98 in) 8H-8566 Universal Socket

Fractional Universal Socket Set, 7 Piece, 3/8 inch Drive - 261-8581

Warranty: Lifetime
• 6 point
• 3/8 inch square drive
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 261-8581 Universal Impact 1/2 in 54.1 mm (2.13 in) 261-8586 Socket
Socket Set 9/16 in 55.6 mm (2.19 in) 261-8587 Socket
Socket Set Consists of: 5/8 in 57.2 mm (2.25 in) 261-8589 Socket
3/8 in 50 mm (1.97 in) 261-8583 Socket
11/16 in 64.3 mm (2.53 in) 261-8590 Socket
7/16 in 50 mm (1.97 in) 261-8585 Socket
3/4 in 65.8 mm (2.59 in) 261-8591 Socket

81
Universal and Swivel Socket Sets - 3/8 inch Square Drive
Metric Universal Socket Set, 9 Piece, 3/8 inch Drive - 9U-6124
SMCS Code: 1251-010, 0601
Warranty: Lifetime
• Model: 3066 Engine
• 9U-6128 used to remove and install fuel injection pump
• Standard length, 12 point universal socket set
• Specially forged and heat treated for toughness and long life–meets rigid industry
standards
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 9U-6124 Universal Metric 14.0 mm 47.9 mm (1.89 in) 9U-6128 Socket (3/8 in Drive)
Socket Set 15.0 mm 47.9 mm (1.89 in) 9U-6129 Socket (3/8 in Drive)
Metric Socket Set Consists of: 16.0 mm 9U-6130
47.9 mm (1.89 in) Socket (3/8 in Drive)
10.0 mm 43.5 mm (1.71 in) 9U-6125 Socket (3/8 in Drive)
17.0 mm 50.7 mm (2 in) 9U-6131 Socket (3/8 in Drive)
12.0 mm 45.5 mm (1.79 in) 9U-6126 Socket (3/8 in Drive)
18.0 mm 50.7 mm (2 in) 9U-6132 Socket (3/8 in Drive)
13.0 mm 45.5 mm (1.79 in) 9U-6127 Socket (3/8 in Drive)
19.0 mm 52.5 mm (2.07 in) 9U-6133 Socket (3/8 in Drive)

Metric Universal Socket Set, 7 Piece, 3/8 inch Drive - 261-8572

Warranty: Lifetime
• 6 point
• 3/8 inch square drive
• Includes socket bar and clips
• Can be ordered by set or individually

Part Part
Size Length Number Description Size Length Number Description
– – 261-8572 Metric Swivel Impact 14.0 mm 55.4 mm (2.18 in) 261-8576 Metric Swivel Impact
Socket Set Socket (3/8 in Drive)
Metric Swivel Impact Set Consists of: 15.0 mm 56.4 mm (2.22 in) 261-8577 Metric Swivel Impact
10.0 mm 50.8 mm (2 in) 261-8573 Metric Swivel Impact Socket (3/8 in Drive)
Socket (3/8 in Drive) 17.0 mm 62.2 mm (2.45 in) 261-8578 Metric Swivel Impact
12.0 mm 53.1 mm (2.09 in) 261-8574 Metric Swivel Impact Socket (3/8 in Drive)
Socket (3/8 in Drive) 18.0 mm 64 mm (2.52 in) 261-8579 Metric Swivel Impact
13.0 mm 54.1 mm (2.13 in) 261-8575 Metric Swivel Impact Socket (3/8 in Drive)
Socket (3/8 in Drive)

82
 Universal and Swivel Socket Sets - 1/2 inch Drive
Fractional Universal Impact Socket Set, 5 Piece, 1/2 inch Drive - 214-6518
Warranty: Lifetime
• 6 point
• 1/2 inch square drive
• Black oxide finish
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 214-6518 Universal Impact 9/16 in 73.8 mm (2.91 in) 214-6522 Socket
Socket Set 5/8 in 73.8 mm (2.91 in) 214-6523 Socket
Universal Impact Socket Set Consists of: 11/16 in 77.8 mm (3.06 in) 214-6524 Socket
1/2 in 73.8 mm (2.91 in) 214-6521 Socket 3/4 in 77.8 mm (3.06 in) 214-6526 Socket

Fractional Universal Impact Socket Set, 14 Piece, 1/2 inch Drive - 246-8184
Warranty: Lifetime
• 6 point
• 1/2 inch square drive
• Black oxide finish
• Standard length impact sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Size Length Part Number Description Size Length Part Number Description
– – 246-8184 Socket Set 7/8 in 77.8 mm (3.06 in) 246-8175 Socket
Universal Impact Socket Set Consists of: 15/16 in 77.8 mm (3.06 in) 246-8176 Socket
1/2 in 73.8 mm (2.91 in) 214-6521 Socket 1 in 77.8 mm (3.06 in) 246-8177 Socket
9/16 in 73.8 mm (2.91 in) 214-6522 Socket 1 - 1/16 in 80.2 mm (3.16 in) 246-8178 Socket
5/8 in 73.8 mm (2.91 in) 214-6523 Socket 1 - 1/8 in 84.9 mm (3.34 in) 246-8179 Socket
11/16 in 77.8 mm (3.06 in) 214-6524 Socket 1 - 3/16 in 84.9 mm (3.34 in) 246-8180 Socket
3/4 in 77.8 mm (3.06 in) 214-6526 Socket 1 - 1/4 in 86.5 mm (3.41 in) 246-8181 Socket
13/16 in 77.8 mm (3.06 in) 246-8173 Socket 1 - 5/16 in 86.5 mm (3.41 in) 246-8182 Socket

83
Universal and Swivel Socket Sets - 1/2 inch Drive
Metric Universal Impact Socket Set, 10 Piece, 1/2 inch Drive - 246-8199
Warranty: Lifetime
• 6 point
• 1/2 inch square drive
• Black oxide finish
• Standard length impact sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Part Part
Size Length Number Description Size Length Number Description
– 246-8199 Metric Universal Impact 14.0 mm 73.7 mm (2.90 in) 246-8189 Universal Impact Socket
Socket Set (1/2 in Drive)
Metric Universal Impact Socket Set Consists of: 15.0 mm 73.7 mm (2.90 in) 246-8190 Universal Impact Socket
10.0 mm 73.7 mm (2.90 in) 246-8185 Universal Impact Socket (1/2 in Drive)
(1/2 in Drive) 16.0 mm 73.7 mm (2.90 in) 246-8191 Universal Impact Socket
11.0 mm 73.7 mm (2.90 in) 246-8186 Universal Impact Socket (1/2 in Drive)
(1/2 in Drive) 17.0 mm 77.8 mm (3.06 in) 246-8192 Universal Impact Socket
12.0 mm 73.7 mm (2.90 in) 246-8187 Universal Impact Socket (1/2 in Drive)
(1/2 in Drive) 18.0 mm 77.7 mm (3.06 in) 246-8194 Universal Impact Socket
13.0 mm 73.7 mm (2.90 in) 246-8188 Universal Impact Socket (1/2 in Drive)
(1/2 in Drive) 19.0 mm 77.7 mm (3.06 in) 246-8197 Universal Impact Socket
(1/2 in Drive)

84
 Ratchets and Sockets — Twist Sockets - 3/8 inch Square Drive
Fractional Twist Socket Set, 13 Piece, 3/8 inch Drive - 241-0873
Warranty: Lifetime
• SAE / Metric impact sockets quickly and easily remove damaged or rounded nuts
and bolts
• 6 fluted sockets grip onto fastener and tighten as more torque is applied (no ham-
mering required to install socket over fastener)
• Applications include oil pan drain plugs, exhaust manifold nuts, studs, pipe nip-
ples, and corroded marine fasteners
• Shallow depth
• Fits sizes from 10 to 19 mm (3/8 to 3/4 inch)
• 3/8 inch square drive
• Standard length
• Industrial black finish
• Includes plastic tray, socket bar, and clips
• Can be ordered by set or individual

Size Length Part Number Description Size Length Part Number Description
– – 241-0873 Twist Socket Set 14 mm 31.7 mm (1.25 in) 241-0863 Socket (3/8 in Drive)
Twist Socket Set Consists of: 15 mm 31.7 mm (1.25 in) 241-0864 Socket (3/8 in Drive)
1/2 in 31.7 mm (1.25 in) 241-0868 Socket (3/8 in Drive) 16 mm 31.7 mm (1.25 in) 241-0870 Socket (3/8 in Drive)
10 mm 31.7 mm (1.25 in) 241-0860 Socket (3/8 in Drive) 17 mm 31.7 mm (1.25 in) 241-0865 Socket (3/8 in Drive)
11 mm 31.7 mm (1.25 in) 241-0867 Socket (3/8 in Drive) 19 mm 34.9 mm (1.37 in) 241-0872 Socket (3/8 in Drive)
11/16 in 34.9 mm (1.37 in) 241-0871 Socket (3/8 in Drive) 3/8 in 31.7 mm (1.25 in) 241-0866 Socket (3/8 in Drive)
12 mm 31.7 mm (1.25 in) 241-0861 Socket (3/8 in Drive) 9/16 in 31.7 mm (1.25 in) 241-0869 Socket (3/8 in Drive)
13 mm 31.7 mm (1.25 in) 241-0862 Socket (3/8 in Drive)

85
Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 1/4 in Drive
Warranty: Lifetime
Size Length Part Number
1/4 inch Drive, Standard Length Sockets, 12 Point
3/16 in 22.2 mm (0.87 in) 9S-1711
7/32 in 22.2 mm (0.87 in) 9S-1712
1/4 in 22.2 mm (0.87 in) 9S-1713
9/32 in 22.2 mm (0.87 in) 9S-1714
5/16 in 22.2 mm (0.87 in) 9S-1715
11/32 in 22.2 mm (0.87 in) 9S-1716
3/8 in 22.2 mm (0.87 in) 9S-1717
7/16 in 22.2 mm (0.87 in) 9S-1718
1/2 in 22.2 mm (0.87 in) 9S-1719
1/4 inch Drive, Deep Length Sockets, 6 Point, Chrome
5/16 in 31.8 mm (1.25 in) 5P-0127
3/16 in 50.8 mm (2 in) 213-9967
7/32 in 50.8 mm (2 in) 213-9968
1/4 in 50.8 mm (2 in) 213-9969
9/32 in 50.8 mm (2 in) 213-9970
5/16 in 50.8 mm (2 in) 213-9971
11/32 in 50.8 mm (2 in) 213-9972
3/8 in 50.8 mm (2 in) 213-9974
7/16 in 50.8 mm (2 in) 213-9978
1/2 in 50.8 mm (2 in) 213-9980
9/16 in 50.8 mm (2 in) 213-9981
1/4 inch Drive, Deep Length Socket, 12 Point
3/8 in 50.8 mm (2 in) 9S-2573

Individual Fractional Sockets, 3/8 in Drive

Warranty: Lifetime

Size Length Part Number

3/8 inch Drive, Universal Sockets, 12 Point
7/16 in 40.1 mm (1.58 in) 8H-8562
3/8 in 40.1 mm (1.58 in) 8S-2284
1/2 in 42.1 mm (1.66 in) 8H-8563
9/16 in 42.8 mm (1.69 in) 8H-8564
5/8 in 44.5 mm (1.75 in) 8H-8565
11/16 in 49.6 mm (1.95 in) 9S-1727

86
 Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 3/8 in Drive (Cont'd.)
Size Length Part Number
3/4 in 50.4 mm (1.98 in) 8H-8566
3/8 inch Drive, Standard Length Sockets, 12 Point
1/4 in 23 mm (0.91 in) 266-3738
5/16 in 23 mm (0.91 in) 266-3739
7/16 in 23 mm (0.91 in) 8H-8567
3/8 in 23 mm (0.91 in) 8S-2274
1/2 in 23.8 mm (0.94 in) 8H-8568
9/16 in 24.6 mm (0.97 in) 8H-8569
5/8 in 26.2 mm (1.03 in) 8H-8570
11/16 in 27 mm (1.06 in) 9S-1728
3/4 in 27.8 mm (1.09 in) 8H-8571
1/4 in (1) 31.8 mm (1.25 in) 8S-1589
5/16 in (1) 31.8 mm (1.25 in) 8S-1590
3/8 in 38.1 mm (1.50 in) 8S-1591
7/16 in 38.1 mm (1.50 in) 8S-1592
3/8 inch Drive, Deep Length Sockets, 12 Point, Chrome
7/16 in 54 mm (2.13 in) 3P-2210 (2)
3/8 in 54.1 mm (2.13 in) 214-6491
7/16 in 54.1 mm (2.13 in) 214-6492
1/2 in 60.5 mm (2.38 in) 214-6493
9/16 in 60.5 mm (2.38 in) 8S-2357
5/8 in (3) 60.5 mm (2.38 in) 9S-5031 (3)
11/16 in 66.8 mm (2.63 in) 214-6494
3/4 in 66.8 mm (2.63 in) 214-6495
13/16 in 69.9 mm (2.75 in) 214-6496
7/8 in 69.9 mm (2.75 in) 6V-0199
3/8 inch Drive, Standard Length Sockets, 6 Point, Chrome
3/8 in 23.1 mm (0.91 in) 214-1144
7/16 in 23.1 mm (0.91 in) 214-1145

1 Shoulder bolt socket 12 point

2 Special socket
3 Comes with insert for removing spark plugs

87
Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 3/8 in Drive (Cont'd.)
Size Length Part Number
1/2 in 23.9 mm (0.94 in) 214-1146
9/16 in 26.2 mm (1.03 in) 214-1147
5/8 in 27.7 mm (1.09 in) 214-1148
11/16 in 28.7 mm (1.13 in) 214-1149
3/4 in 30.2 mm (1.19 in) 214-1150
3/8 inch Drive, Deep Length Sockets, 6 Point, Chrome
3/8 in 54 mm (2.13 in) 214-1152
7/16 in 54 mm (2.13 in) 214-1153
1/2 in 60.3 mm (2.37 in) 214-1154
9/16 in 60.3 mm (2.37 in) 214-1155
5/8 in 60.3 mm (2.37 in) 214-1156
11/16 in 66.7 mm (2.63 in) 214-1157
3/4 in 66.7 mm (2.63 in) 214-1158
13/16 in 69.9 mm (2.75 in) 214-1159
7/8 in 69.9 mm (2.75 in) 214-1160
3/8 inch Drive, Standard Length Impact Sockets, 6 Point
5/16 in 22.2 mm (0.87 in) 271-4601
3/8 in 23.8 mm (0.94 in) 271-4602
7/16 in 23.8 mm (0.94 in) 271-4603
1/2 in 23.8 mm (0.94 in) 271-4604
9/16 in 23.8 mm (0.94 in) 271-4605
5/8 in 23.8 mm (0.94 in) 271-4606
1 in 25.4 mm (1 in) 271-4612
11/16 in 26.2 mm (1.03 in) 271-4607
3/4 in 26.2 mm (1.03 in) 271-4608
13/16 in 30.2 mm (1.19 in) 271-4609
7/8 in 32.5 mm (1.28 in) 271-4610
15/16 in 33.3 mm (1.31 in) 271-4611
3/8 inch Drive, Deep Length Impact Sockets, 12 Point
3/8 in 22.2 mm (0.87 in) 271-4615
7/16 in 23.8 mm (0.94 in) 271-4616
1/2 in 23.8 mm (0.94 in) 271-4617

88
 Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 3/8 in Drive (Cont'd.)
Size Length Part Number
9/16 in 23.8 mm (0.94 in) 271-4618
5/8 in 23.8 mm (0.94 in) 271-4619
11/16 in 26.2 mm (1.03 in) 271-4620
3/4 in 26.2 mm (1.03 in) 271-4621
3/8 inch Drive, Deep Length Impact Sockets, 6 Point
5/16 in 54 mm (2.13 in) 271-4670
3/8 in 54 mm (2.13 in) 271-4671
7/16 in 54 mm (2.13 in) 271-4672
1/2 in 54 mm (2.13 in) 271-4673
9/16 in 60.3 mm (2.37 in) 271-4674
5/8 in 60.3 mm (2.37 in) 271-4675
3/4 in 69.9 mm (2.75 in) 271-4677
13/16 in 69.9 mm (2.75 in) 271-4678
7/8 in 69.9 mm (2.75 in) 271-4679
15/16 in 69.9 mm (2.75 in) 271-4680
1 in 69.9 mm (2.75 in) 271-4681
11/16 in 74.6 mm (2.94 in) 271-4676

Individual Fractional Sockets, 1/2 in Drive

Warranty: Lifetime
Size Length Part Number
1/2 inch Drive, Standard Length Sockets, 12 Point
1/2 in 38.1 mm (1.50 in) 1S-0259
7/16 in 38.1 mm (1.50 in) 214-6497
9/16 in 38.1 mm (1.50 in) 8H-8549
5/8 in 38.1 mm (1.50 in) 8H-8550
11/16 in 38.1 mm (1.50 in) 8H-8551
3/4 in 38.1 mm (1.50 in) 8H-8552
13/16 in 38.1 mm (1.50 in) 8H-8553
7/8 in 38.1 mm (1.50 in) 8H-8554
15/16 in 38.1 mm (1.50 in) 8H-8555
1 in 38.1 mm (1.50 in) 8H-8556
1 1/16 in 41.3 mm (1.63 in) 9S-1729
1/2 in 44.5 mm (1.75 in) 8S-1593

89
Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 1/2 in Drive (Cont'd.)
Size Length Part Number
9/16 in 44.5 mm (1.75 in) 8S-1594
5/8 in 44.5 mm (1.75 in) 8S-1595
11/16 in 44.5 mm (1.75 in) 8S-1596
1 1/8 in 44.5 mm (1.75 in) 9S-1730
1 1/4 in 47.6 mm (1.87 in) 9S-1731
1/2 inch Drive, Standard Length Sockets, 6 Point, Chrome
7/16 in 38.1 mm (1.50 in) 214-6500
1/2 in 38.1 mm (1.50 in) 214-6501
9/16 in 38.1 mm (1.50 in) 214-6503
5/8 in 38.1 mm (1.50 in) 214-6504
11/16 in 38.1 mm (1.50 in) 214-6506
3/4 in 38.1 mm (1.50 in) 214-6507
13/16 in 38.1 mm (1.50 in) 214-6509
7/8 in 38.1 mm (1.50 in) 214-6510
15/16 in 38.9 mm (1.53 in) 214-6511
1 in 39.7 mm (1.56 in) 214-6512
1 11/16 in 42.9 mm (1.69 in) 214-6513
1 1/8 in 44.5 mm (1.75 in) 214-6514
1/2 inch Drive, Deep Length Sockets, 12 Point
1 in 82.6 mm (3.25 in) 214-1162
9 in 82.6 mm (3.25 in) 214-1163
5 in 82.6 mm (3.25 in) 214-1164
11 in 82.6 mm (3.25 in) 214-1165
3 in 82.6 mm (3.25 in) 214-1166
13 in 82.6 mm (3.25 in) 214-1167
7 in 82.6 mm (3.25 in) 214-1168
15 in 82.6 mm (3.25 in) 214-1169
1 in 82.6 mm (3.25 in) 214-1170
1 1/8 in 82.6 mm (3.25 in) 214-1172
1 11/16 in 82.6 mm (3.25 in) 214-1171
1 1/2 in 133.35 mm (5.25 in) 386-3335
1/2 inch Drive, Deep Length Sockets, 6 Point
1/2 in 82.6 mm (3.25 in) 2P-5475
9/16 in 82.6 mm (3.25 in) 2P-5476
5/8 in 82.6 mm (3.25 in) 2P-5477
11/16 in 82.6 mm (3.25 in) 2P-5478
3/4 in 82.6 mm (3.25 in) 2P-5479
13/16 in 82.6 mm (3.25 in) 2P-5481
7/8 in 82.6 mm (3.25 in) 2P-5482
15/16 in 82.6 mm (3.25 in) 2P-5483

90
 Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 1/2 in Drive (Cont'd.)
Size Length Part Number
1 in 82.6 mm (3.25 in) 2P-5484
1/2 inch Drive, Standard Length Impact Sockets, 6 Point, Black
1/2 in 38.1 mm (1.50 in) 213-3087
9/16 in 38.1 mm (1.50 in) 213-3088
5/8 in 38.1 mm (1.50 in) 213-3089
11/16 in 38.1 mm (1.50 in) 213-3091
3/4 in 38.1 mm (1.50 in) 213-3094
13/16 in 38.1 mm (1.50 in) 213-3099
7/8 in 38.1 mm (1.50 in) 213-3102
15/16 in 44.5 mm (1.75 in) 213-3104
1 in 44.5 mm (1.75 in) 213-3107
1 1/16 in 50.8 mm (2 in) 213-3109
1 1/8 in 50.8 mm (2 in) 213-3110
1 1/18 in 82.6 mm (3.25 in) 323-6267
1/2 inch Drive, Universal Impact Sockets, 6 Point, Black
1/2 in 73.8 mm (2.91 in) 214-6521
9/16 in 73.8 mm (2.91 in) 214-6522
5/8 in 73.8 mm (2.91 in) 214-6523
11/16 in 77.8 mm (3.06 in) 214-6524
3/4 in 77.8 mm (3.06 in) 214-6526
1/2 inch Drive, Deep Length Impact Sockets, 6 Point, Black
7/16 in 82.6 mm (3.25 in) 213-3516
1/2 in 82.6 mm (3.25 in) 213-3517
9/16 in 82.6 mm (3.25 in) 213-3518
5/8 in 82.6 mm (3.25 in) 213-3520
11/16 in 82.6 mm (3.25 in) 213-3521
3/4 in 82.6 mm (3.25 in) 213-3522
13/16 in 82.6 mm (3.25 in) 213-3523
1 1/4 in 88.9 mm (3.50 in) 1U-8701
7/8 in 88.9 mm (3.50 in) 213-3524
15/16 in 88.9 mm (3.50 in) 213-3525
1 in 88.9 mm (3.50 in) 213-3526
1 1/16 in 88.9 mm (3.50 in) 213-3528
1 1/8 in 88.9 mm (3.50 in) 213-3530

91
Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 3/4 in Drive
Warranty: Lifetime

Size Length Part Number

3/4 inch Drive, Standard Length Sockets, 12 Point
1 3/8 in 35 mm (1.38 in) 386-3353
3/4 in 50.8 mm (2 in) 8H-8529
7/8 in 50.8 mm (2 in) 8H-8530
15/16 in 50.8 mm (2 in) 8H-8531
1 in 52.4 mm (2.06 in) 8H-8532
1 1/16 in 54 mm (2.13 in) 8H-8533
1 1/8 in 55.5 mm (2.19 in) 8H-8534
1 1/4 in 57.2 mm (2.25 in) 8H-8535
1 in 57.2 mm (2.25 in) 8S-1601
1 5/16 in 58.7 mm (2.31 in) 8H-8536
1 1/2 in 63.5 mm (2.50 in) 8H-8537
1 5/8 in 66.7 mm (2.63 in) 8H-8539
1 11/16 in 69.9 mm (2.75 in) 8H-8538
1 3/4 in 69.9 mm (2.75 in) 8H-8540
1 7/8 in 79.4 mm (3.13 in) 8H-8541
2 in 79.4 mm (3.13 in) 8H-8542
5/8 in (4) 82.6 mm (3.25 in) 2P-8276
2 1/4 in 82.6 mm (3.25 in) 8H-8504
2 1/8 in 82.6 mm (3.25 in) 8H-8543
2 3/16 in 82.6 mm (3.25 in) 8H-8544
3/4 in 82.6 mm (3.25 in) 8S-1597
13/16 in 82.6 mm (3.25 in) 8S-1598
7/8 in 82.6 mm (3.25 in) 8S-1599
15/16 in 82.6 mm (3.25 in) 8S-1600
2 1/2 in (5) 152.4 mm (6 in) 3P-2230
3/4 inch Drive, Standard Length Impact Sockets, 6 Point, Black
3/4 in 44.5 mm (1.75 in) 214-6553
13/16 in 47.8 mm (1.88 in) 214-6554
7/8 in 47.8 mm (1.88 in) 214-6556
15/16 in 47.8 mm (1.88 in) 214-6557
1 in 50.8 mm (2 in) 214-6558
1 11/16 in 50.8 mm (2 in) 214-6559
1 1/8 in 54.1 mm (2.13 in) 214-6560
1 3/16 in 54.1 mm (2.13 in) 214-6561
1 1/4 in 54.1 mm (2.13 in) 214-6562

4 Shoulder bolt socket 12 point

5 Special socket for fast fill fuel adapter

92
 Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 3/4 in Drive (Cont'd.)
Size Length Part Number
1 5/16 in 57.2 mm (2.25 in) 214-6564
1 3/8 in 57.2 mm (2.25 in) 214-6565
1 7/16 in 57.2 mm (2.25 in) 214-6506
1 1/2 in 57.2 mm (2.25 in) 8T-5182
1 9/16 in 60.5 mm (2.38 in) 214-6567
1 5/8 in 60.5 mm (2.38 in) 214-6568
1 3/4 in 65 mm (2.56 in) 214-6569
1 11/16 in 65 mm (2.56 in) 214-6607
1 13/16 in 66.8 mm (2.63 in) 214-6570
1 7/8 in 69.9 mm (2.75 in) 214-6571
2 1/4 in 70 mm (2.75 in) 386-3266
2 in 73.2 mm (2.88 in) 214-6572
2 3/16 in 81 mm (3.18 in) 386-3267
2 3/8 in 89 mm (3.5 in) 386-3268
3/4 inch Drive, Deep Length Impact Sockets, 6 Point, Black
1 in 76.2 mm (3 in) 214-6599
1 1/16 in 76.2 mm (3 in) 214-6600
1 1/8 in 76.2 mm (3 in) 214-6601
1 3/16 in 82.6 mm (3.25 in) 214-6602
1 1/4 in 82.6 mm (3.25 in) 214-6603
1 5/16 in 82.6 mm (3.25 in) 214-6604
1 3/8 in 82.6 mm (3.25 in) 214-6605
1 1/2 in 88.9 mm (3.50 in) 1U-5715
1 7/16 in 88.9 mm (3.50 in) 214-6606
1 9/16 in 88.9 mm (3.50 in) 214-6608
1 5/8 in 88.9 mm (3.50 in) 214-6609
1 3/4 in 88.9 mm (3.50 in) 214-6611
1 1/8 in 88.9 mm (3.50 in) 227-4397 (6)
1 11/16 in 88.9 mm (3.50 in) 6V-7874
1 13/16 in 95.3 mm (3.75 in) 214-6612
1 7/8 in 95.3 mm (3.75 in) 214-6613
2 in Hex 95.3 mm (3.75 in) 214-6614
1 3/16 in 101.6 mm (4 in) 5P-3053 (7)
1 1/2 in 127 mm (5 in) 5P-3054
3/4 inch Drive, Tapered Impact Sockets, 12 Point, Black
3/4 in 127 mm (5 in) 124-0662
3/4 Inch Drive, Shallow, 12 Point, Black
1 in 50.8 mm (2 in) 432-8907

6 Special use for 3406 Engine head service

7 Budd wheel socket

93
Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 1 in Drive
Warranty: Lifetime

Size Length Part Number

1 inch Drive, Standard Length Sockets, 12 Point
1 1/2 in 69.9 mm (2.75 in) 6V-0024
1 inch Drive, Standard Length Sockets, 6 Point, Black
1 3/32 in (8) 57.2 mm (2.25 in) 5P-3579
2 5/8 in (9) 57.2 mm (2.25 in) 5S-6079
29/32 in (8) 57.2 mm (2.25 in) 6V-2002
1 1/8 in (8) 57.2 mm (2.25 in) 9S-6373
1 7/16 in 63.5 mm (2.50 in) 4C-6723
1 9/32 in (8) 63.5 mm (2.50 in) 5P-3580
1 15/32 in (8) 63.5 mm (2.50 in) 5P-3581
1 1/2 in (8) 63.5 mm (2.50 in) 9S-6371
1 5/16 in (8) 63.5 mm (2.50 in) 9S-6372
15/16 in (10) 63.5 mm (2.50 in) 9S-6374
1 1/8 in (10) 66.8 mm (2.63 in) 9S-6369
1 11/16 in 76.2 mm (3 in) 2P-2334
1 3/4 in 76.2 mm (3 in) 2P-2335
15/16 in (8) 76.2 mm (3 in) 9S-6370
1 7/8 in 82.6 mm (3.25 in) 2P-2336
2 1/4 in (11) 87.1 mm (3.43 in) 5P-1748
7/8 in (9) 88.9 mm (3.50 in) 5P-1745
27/32 in 88.9 mm (3.50 in) 6V-4175
7/8 in (10) 88.9 mm (3.50 in) 9S-6375
4 1/4 in 90.4 mm (3.56 in) 5P-1662
2 3/16 in 91.9 mm (3.62 in) 2P-2338
2 3/8 in Hex 98.4 mm (3.87 in) 5S-6077
2 1/2 in (9) 104.8 mm (4.13 in) 5S-6078
2 3/4 in (9) 114.3 mm (4.50 in) 5S-6080
3 in (9) 123.8 mm (4.87 in) 5S-6081
3 1/8 in (9) 127 mm (5 in) 5S-6082
3 1/4 in (9) 127 mm (5 in) 5S-6083
4 in (9) 127 mm (5 in) 5S-6087
3 1/2 in (9) 133.4 mm (5.25 in) 5S-6084
3 5/8 in (9) 133.4 mm (5.25 in) 5S-6085

8 Track Bolt Socket, 6 point, Warranty: Six Months

9 Chrome finish
10 Thin wall track bolt socket, 6 point, Warranty: Six Months
11 Impact Socket, 6 point, Warranty: Six Months

94
 Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 1 in Drive (Cont'd.)
Size Length Part Number
3 3/4 in (12) 136.5 mm (5.37 in) 5S-6086
1 inch Square Drive Standard Length Impact Sockets, 12 Point, Industrial Finish
1 1/2 in 66.5 mm (2.62 in) 168-7955
1 inch Square Drive Standard Length Impact Sockets, 12 Point, Black Finish
1 1/2 in 57.2 mm (2.25 in) 4C-6994
1 inch Square Drive Standard Length Impact Sockets, 6 Point, Industrial Finish
3/4 in 54 mm (2.13 in) 9U-6548
13/16 in 54 mm (2.13 in) 9U-6549
7/8 in 54 mm (2.13 in) 9U-6550
15/16 in 54 mm (2.13 in) 9U-6551
1 1/4 in 54 mm (2.13 in) 386-3257
1 in 57.2 mm (2.25 in) 9U-6552
1 1/16 in 57.2 mm (2.25 in) 9U-6553
1 1/8 in 57.2 mm (2.25 in) 9U-6554
1 3/16 in 57.2 mm (2.25 in) 9U-6555
3 7/8 in 60 mm (2.36 in) 386-3259
1 5/16 in 63.5 mm (2.50 in) 9U-6557
1 3/8 in 63.5 mm (2.50 in) 9U-6558
1 7/16 in 63.5 mm (2.50 in) 9U-6559
1 1/2 in 66.7 mm (2.63 in) 9U-6560
1 9/16 in 66.7 mm (2.63 in) 9U-6561 (13)
1 1/2 in 69.9 mm (2.75 in) 258-5686
1 5/8 in 69.9 mm (2.75 in) 9U-6562
1 11/16 in 73 mm (2.87 in) 9U-6563
1 3/4 in 73 mm (2.87 in) 9U-6564
1 13/16 in 74.6 mm (2.94 in) 9U-6565
1 7/8 in 74.6 mm (2.94 in) 9U-6566
1 15/16 in 74.6 mm (2.94 in) 9U-6567
1 13/16 in 74.6 mm (2.94 in) 386-3258
2 in 82.6 mm (3.25 in) 9U-6568
2 1/16 in 82.6 mm (3.25 in) 9U-6569
2 1/8 in 82.6 mm (3.25 in) 9U-6570
2 3/16 in 84.9 mm (3.34 in) 9U-6571
2 1/4 in 84.9 mm (3.34 in) 9U-6572
2 5/16 in 88.9 mm (3.50 in) 9U-6573
2 3/8 in 92.1 mm (3.63 in) 9U-6574
2 7/16 in 92.1 mm (3.63 in) 9U-6575
2 1/2 in 92.1 mm (3.63 in) 9U-6576

12 Chrome finish
13 Used on 789 Off-Highway Truck cab support assemblies bolts

95
Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 1 in Drive (Cont'd.)
Size Length Part Number
2 9/16 in 95.3 mm (3.75 in) 9U-6577
2 5/8 in 95.3 mm (3.75 in) 9U-6578
2 11/16 in 98.4 mm (3.87 in) 9U-6579
2 3/4 in 98.4 mm (3.87 in) 9U-6580
2 13/16 in 101.6 mm (4 in) 9U-6581
2 7/8 in 101.6 mm (4 in) 9U-6582
3 in 111.1 mm (4.37 in) 9U-6584
2 15/16 in 122.2 mm (4.81 in) 9U-6583
1 inch Square Drive Deep Length Impact Socket, 6 Point, Industrial Finish
55 mm (2 3/16 in), 1 in drive, 111 mm (4.37 in) 4C-9748
deep well, impact
1 3/16 in 111 mm (4.37 in) 4C-9787
4 in 368 mm (3 in) 447-1585
4 1/2 in 470 mm (3.375 in 447-1586

Individual Fractional Sockets, 1 1/2 in Drive

Warranty: Lifetime
Size Length Part Number
1 1/2 inch Drive, Track Sockets, Impact Sockets
1 7/16 in 77 mm (3.03 in) 386-3246
1 1/2 in 78 mm (3.07 in) 9U-6734 (14)
1 5/8 in 114.3 mm (4.50 in) 1U-8798
1 11/16 in 114.3 mm (4.50 in) 1U-8586
1 3/4 in 83.3 mm (3.28 in) 386-3245
1 13/16 in 84.6 mm (3.33 in) 261-8571
1 7/8 in 85.7 mm (3.38 in) 386-3247
2 in 114.3 mm (4.50 in) 8T-9175
2 1/16 in 114.3 mm (4.50 in) 8T-9174
2 1/4 in 95.2 mm (3.75 in) 386-3225
2 3/8 in 98.4 mm (3.88 in) 386-3226
2 3/16 in 92.87 mm (3.66 in) 386-3249
2 9/16 in 102.4 mm (4.03 in) 132-8743
2 3/4 in 107.1 mm (4.22 in) 136-5190
3 in 112.7 mm (4.44 in) 386-3230
3 1/4 in 118.3 mm (4.66 in) 231-4550 (15)
3 1/2 in 124.6 mm (4.91 in) 386-3227

14 Special for 994 Lift Cylinder

15 Special for 797 Off-Highway Truck Ball Studs

96
 Ratchets and Sockets — Individual Sockets
Individual Fractional Sockets, 1 1/2 in Drive (Cont'd.)
Size Length Part Number
3 3/4 in 130.2 mm (5.13 in) 386-3228
3 7/8 in 133.4 mm (5.25 in) 386-3229
4 in 137.3 mm (5.41 in) 386-3232
4 1/4 in 152.4 mm (6 in) 234-6041 (16)
4 5/8 in 154 mm (6.06 in) 386-3231
5 in 171.5 mm (6.75 in) 386-3234

Individual Metric Sockets, 1/4 in Drive

Warranty: Lifetime unless otherwise noted

Size Length Part Number

1/4 inch Drive, Standard Length Sockets, 6 Point
4 mm 22.2 mm (0.87 in) 200-8415
5 mm 22.2 mm (0.87 in) 200-8417
5 mm 22.2 mm (0.87 in) 200-8418
6 mm 22.2 mm (0.87 in) 200-8419
7 mm 22.2 mm (0.87 in) 200-8420
8 mm 22.2 mm (0.87 in) 200-8421
9 mm 22.2 mm (0.87 in) 200-8422
10 mm 22.2 mm (0.87 in) 200-8423
11 mm 22.2 mm (0.87 in) 200-8424
12 mm 22.2 mm (0.87 in) 200-8426
13 mm 22.2 mm (0.87 in) 200-8427
14 mm 22.2 mm (0.87 in) 200-8428
15 mm 23 mm (0.91 in) 200-8429
1/4 inch Drive, Deep Length Sockets, 6 Point
6 mm 50.8 mm (2 in) 194-3518
7 mm 50.8 mm (2 in) 194-3519
8 mm 50.8 mm (2 in) 194-3521
9 mm 50.8 mm (2 in) 194-3522
10 mm 50.8 mm (2 in) 194-3523
11 mm 50.8 mm (2 in) 194-3527
12 mm 50.8 mm (2 in) 194-3528
13 mm 50.8 mm (2 in) 194-3529
14 mm 50.8 mm (2 in) 194-3530

16 Special for 797B Off-Highway Truck Steering Linkages

97
Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 3/8 in Drive
Warranty: Lifetime unless otherwise noted

Size Length Part Number

3/8 inch Drive, Standard Length Sockets, 12 Point
8 mm 23 mm (0.91 in) 194-3480
9 mm 23 mm (0.91 in) 194-3483
10 mm 23 mm (0.91 in) 194-3488
11 mm 23 mm (0.91 in) 194-3490
12 mm 23.8 mm (0.94 in) 194-3492
18 mm 66.7 mm (2.63 in) 199-9034
19 mm 66.7 mm (2.63 in) 199-9035
3/8 inch Drive, Standard Length Sockets, 6 Point
8 mm 23 mm (0.91 in) 214-6621
9 mm 23 mm (0.91 in) 214-6623
10 mm 23 mm (0.91 in) 214-6624
11 mm 23 mm (0.91 in) 214-6625
12 mm 23.8 mm (0.94 in) 214-6626
13 mm 24.6 mm (0.97 in) 214-6627
14 mm 26.2 mm (1.03 in) 214-6628
16 mm 27.8 mm (1.09 in) 214-6630
15 mm 27 mm (1.06 in) 214-6629
17 mm 28.6 mm (1.13 in) 214-6631
18 mm 28.6 mm (1.13 in) 214-6632
19 mm 30.2 mm (1.19 in) 214-6633
3/8 inch Drive, Deep Length Sockets, 6 Point
10 mm 54 mm (2.13 in) 214-6635
11 mm 54 mm (2.13 in) 214-6636
12 mm 54 mm (2.13 in) 214-6637
13 mm 54 mm (2.13 in) 214-6638
14 mm 60.3 mm (2.37 in) 214-6639
15 mm 60.3 mm (2.37 in) 214-6640
17 mm 66.7 mm (2.63 in) 214-6641
19 mm 66.7 mm (2.63 in) 214-6642
3/8 inch Drive, Universal Standard Length Sockets, 12 Point
10 mm 43.5 mm (1.71 in) 9U-6125
12 mm 45.5 mm (1.79 in) 9U-6126
13 mm 45.5 mm (1.79 in) 9U-6127
14 mm 47.9 mm (1.89 in) 9U-6128
15 mm 47.9 mm (1.89 in) 9U-6129
16 mm 47.9 mm (1.89 in) 9U-6130
17 mm 50.7 mm (2 in) 9U-6131
18 mm 50.7 mm (2 in) 9U-6132

98
 Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 3/8 in Drive (Cont'd.)
Size Length Part Number
19 mm 52.5 mm (2.07 in) 9U-6133
3/8 inch Drive, Impact Standard Length Sockets, 12 Point
8 mm 23 mm (0.91 in) 271-4655
10 mm 23 mm (0.91 in) 271-4656
11 mm 23.8 mm (0.94 in) 271-4657
12 mm 23.8 mm (0.94 in) 271-4658
13 mm 23.8 mm (0.94 in) 271-4659
14 mm 27 mm (1.06 in) 271-4660
15 mm 27 mm (1.06 in) 271-4661
16 mm 27.8 mm (1.09 in) 271-4662
17 mm 28.2 mm (1.11 in) 271-4663
18 mm 29 mm (1.14 in) 271-4664
19 mm 30.6 mm (1.20 in) 271-4665
20 mm 30.9 mm (1.22 in) 271-4666
21 mm 32.1 mm (1.26 in) 271-4667
22 mm 32.9 mm (1.30 in) 271-4668
3/8 inch Drive, Impact Standard Length Sockets, 6 Point
8 mm 23 mm (0.91 in) 271-4623
9 mm 23 mm (0.91 in) 271-4624
10 mm 23 mm (0.91 in) 271-4625
11 mm 23.8 mm (0.94 in) 271-4626
12 mm 23.8 mm (0.94 in) 271-4627
13 mm 24.6 mm (0.97 in) 271-4628
14 mm 27 mm (1.06 in) 271-4630
15 mm 27 mm (1.06 in) 271-4631
16 mm 27.8 mm (1.09 in) 271-4632
17 mm 28.2 mm (1.11 in) 271-4633
18 mm 29 mm (1.14 in) 271-4634
19 mm 30.6 mm (1.20 in) 271-4635
21 mm 29.5 mm (1.16 in) 271-4636
24 mm 33 mm (1.30 in) 271-4637
3/8 inch Drive, Impact Deep Length Sockets, 12 Point
8 mm 54 mm (2.13 in) 271-4684
9 mm 54 mm (2.13 in) 271-4685
10 mm 54 mm (2.13 in) 271-4686
11 mm 54 mm (2.13 in) 271-4687
12 mm 54 mm (2.13 in) 271-4688
13 mm 54 mm (2.13 in) 271-4689
14 mm 60.3 mm (2.37 in) 271-4690
15 mm 60.3 mm (2.37 in) 271-4691

99
Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 3/8 in Drive (Cont'd.)
Size Length Part Number
16 mm 60.3 mm (2.37 in) 271-4692
17 mm 66.7 mm (2.63 in) 271-4693
18 mm 66.7 mm (2.63 in) 271-4694
19 mm 66.7 mm (2.63 in) 271-4695
21 mm 66.7 mm (2.63 in) 271-4696
24 mm 73 mm (2.87 in) 271-4697
3/8 inch Drive, Impact Deep Length Sockets 6 Point
8 mm 54 mm (2.13 in) 271-4639
9 mm 54 mm (2.13 in) 271-4640
10 mm 54 mm (2.13 in) 271-4641
11 mm 54 mm (2.13 in) 271-4642
12 mm 54 mm (2.13 in) 271-4643
13 mm 54 mm (2.13 in) 271-4644
14 mm 60.3 mm (2.37 in) 271-4645
15 mm 60.3 mm (2.37 in) 271-4646
16 mm 60.3 mm (2.37 in) 271-4647
17 mm 66.7 mm (2.63 in) 271-4648
18 mm 66.7 mm (2.63 in) 271-4650
19 mm 66.7 mm (2.63 in) 271-4651
21 mm 66.7 mm (2.63 in) 271-4652
24 mm 73 mm (2.87 in) 271-4653

Individual Metric Sockets, 1/2 in Drive

Warranty: Lifetime unless otherwise noted

Size Length Part Number

1/2 inch Drive, Deep Length Sockets, 6 Point
36 mm (17) 88.9 mm (3.50 in) 242-0779
1/2 inch Drive, Standard Length Sockets, 12 Point
12 mm 38.1 mm (1.50 in) 199-6149
13 mm 38.1 mm (1.50 in) 199-6150
14 mm 38.1 mm (1.50 in) 8T-3041
15 mm 38.1 mm (1.50 in) 6V-9110
16 mm 38.1 mm (1.50 in) 6V-9111
17 mm 38.1 mm (1.50 in) 6V-9112

17 Warranty: Manufacturer, 120 Day

100
 Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 1/2 in Drive (Cont'd.)
Size Length Part Number
18 mm 38.1 mm (1.50 in) 6V-9113
19 mm 38.1 mm (1.50 in) 6V-9114
20 mm 38.1 mm (1.50 in) 199-6152
21 mm 38.1 mm (1.50 in) 6V-9115
22 mm 38.1 mm (1.50 in) 6V-9116
23 mm 38.1 mm (1.50 in) 199-6153
24 mm 38.8 mm (1.53 in) 199-6154
25 mm 38.8 mm (1.53 in) 194-3558
26 mm 41.2 mm (1.62 in) 194-3559
27 mm 42.8 mm (1.69 in) 194-3562
28 mm 44.4 mm (1.75 in) 194-3563
29 mm 44.4 mm (1.75 in) 194-3564
30 mm 44.4 mm (1.75 in) 194-3565
31 mm 47.6 mm (1.87 in) 194-3566
32 mm 47.6 mm (1.87 in) 194-3567
1/2 inch Drive, Deep Length Sockets, 12 Point
16 mm 82.6 mm (3.25 in) 194-3505
17 mm 82.6 mm (3.25 in) 194-3506
18 mm 82.6 mm (3.25 in) 194-3510
19 mm 82.6 mm (3.25 in) 194-3511
20 mm 82.6 mm (3.25 in) 194-3512
21 mm 82.6 mm (3.25 in) 194-3513
22 mm 82.6 mm (3.25 in) 194-3514
24 mm 82.6 mm (3.25 in) 194-3515
25 mm 82.6 mm (3.25 in) 194-3516
26 mm 82.6 mm (3.25 in) 194-3517
33 mm 76.2 mm (3 in) 386-3338
1/2 inch Drive, Standard Length Impact Sockets, 6 Point, Black
10 mm 38.1 mm (1.50 in) 213-6926
11 mm 38.1 mm (1.50 in) 213-6927
12 mm 38.1 mm (1.50 in) 213-6928
13 mm 38.1 mm (1.50 in) 213-6929

101
Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 1/2 in Drive (Cont'd.)
Size Length Part Number
14 mm 38.1 mm (1.50 in) 213-6930
15 mm 38.1 mm (1.50 in) 213-6932
16 mm 38.1 mm (1.50 in) 213-6933
17 mm 38.1 mm (1.50 in) 213-6934
18 mm 38.1 mm (1.50 in) 213-6935
19 mm 38.1 mm (1.50 in) 213-6936
20 mm 38.1 mm (1.50 in) 213-6924
21 mm 38.1 mm (1.50 in) 213-6937
1/2 inch Drive, Deep Length Impact Sockets, 6 Point, Black
10 mm 82.6 mm (3.25 in) 214-6644
11 mm 82.6 mm (3.25 in) 214-6645
12 mm 82.6 mm (3.25 in) 214-6646
13 mm 82.6 mm (3.25 in) 214-6647
14 mm 82.6 mm (3.25 in) 214-6648
15 mm 82.6 mm (3.25 in) 214-6649
16 mm 82.6 mm (3.25 in) 214-6650
17 mm 82.6 mm (3.25 in) 214-6651
18 mm 82.6 mm (3.25 in) 214-6652
19 mm 82.6 mm (3.25 in) 214-6653
20 mm 82.6 mm (3.25 in) 214-7346
33 mm 76.2 mm (3 in) 386-3337

Individual Metric Sockets, 3/4 in Drive

Warranty: Lifetime unless otherwise noted

Size Length Part Number

3/4 inch Drive, Standard Length Sockets, 6 Point
24 mm 50.8 mm (2 in) 6V-9117
30 mm 57.2 mm (2.25 in) 6V-9118
36 mm 58.7 mm (2.31 in) 6V-9119
46 mm 73 mm (2.87 in) 6V-9120
32 mm 48 mm (1.89 in) 386-3358

102
 Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 3/4 in Drive (Cont'd.)
Size Length Part Number
3/4 inch Drive, Standard Length Impact Sockets, 12 Point
20 mm 55.5 mm (2.19 in) 152-1058
3/4 inch Drive, Deep Length Impact Sockets, 6 Point
36 mm 89 mm (3.50 in) 175-6797
43 mm 88.9 mm (3.50 in) 6V-7874
3/4 inch Drive, Standard Length Impact Sockets, 6 Point, Black
17 mm 44.5 mm (1.75 in) 9U-6523
19 mm 44.5 mm (1.75 in) 9U-6524
20 mm 44.5 mm (1.75 in) 9U-6525
21 mm 47.8 mm (1.88 in) 9U-6526
22 mm 47.6 mm (1.87 in) 9U-6527
23 mm 47.8 mm (1.88 in) 9U-6528
24 mm 47.6 mm (1.87 in) 9U-6529
26 mm 50.8 mm (2 in) 9U-6530
27 mm 50.8 mm (2 in) 9U-6531
28 mm 53.8 mm (2.12 in) 9U-6532
30 mm 53.8 mm (2.12 in) 9U-6533
31 mm 54 mm (2.13 in) 9U-6534
32 mm 54 mm (2.13 in) 9U-6535
33 mm 53.8 mm (2.12 in) 9U-6536
34 mm 54 mm (2.13 in) 9U-6537
35 mm 57.2 mm (2.25 in) 9U-6538
36 mm 57.2 mm (2.25 in) 9U-6539
38 mm 57.2 mm (2.25 in) 9U-6540
40 mm 66.7 mm (2.63 in) 9U-6541
41 mm 66.5 mm (2.62 in) 9U-6542
42 mm 66.5 mm (2.62 in) 9U-6543
43 mm 66.5 mm (2.62 in) 9U-6544
46 mm 66.7 mm (2.63 in) 9U-6545
50 mm 73.2 mm (2.88 in) 9U-6546

Individual Metric Sockets, 1 in through 2 1/2 in Drive (also No. 5 Spline)

Warranty: Lifetime unless otherwise noted

Size Length Part Number

1 inch Drive, Standard Length Impact Sockets, 6 Point
30 mm 54 mm (2.13 in) 386-3261
36 mm 63.5 mm (2.50 in) 9U-5089

103
Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 1 in through 2 1/2 in Drive (also No. 5 Spline) (Cont'd.)
Size Length Part Number
46 mm 60 mm (2.38 in) 386-3262
46 mm 73.5 mm (2.9 in) 4C-6724
46 mm 86 mm (3.39 in) 207-8155
1 inch Drive, Deep Length Impact Sockets, 6 Point
55 mm 111 mm (4.37 in) 4C-8217
1 inch Drive, Standard Length Impact Sockets, 12 Point
55 mm 83 mm (3.27 in) 386-3318
41 mm 70 mm (2.76 in) 386-3310
60 mm 83 mm (3.27 in) 386-3311
95 mm 100 mm (3.94 in) 386-3312
33 mm 61 mm (2.40 in) 386-3314
36 mm 65 mm (2.56 in) 386-3315
46 mm 75 mm (2.95 in) 386-3316
50 mm 80 mm (3.15 in) 386-3317
65 mm 86 mm (3.39 in) 386-3319
70 mm 86 mm (3.39 in) 386-3320
75 mm 86 mm (3.39 in) 386-3321
80 mm 90 mm (3.54 in) 386-3322
88 mm 90 mm (3.54 in) 386-3323
1 inch Drive, Tapered Impact Sockets, 6 Point (18)
19 mm 89 mm (3.50 in) 1U-7626
22 mm 89 mm (3.50 in) 1U-7627
24 mm 89 mm (3.50 in) 1U-7628
27 mm 89 mm (3.50 in) 1U-7629
30 mm 89 mm (3.50 in) 1U-7630
32 mm 89 mm (3.50 in) 1U-7631
1 1/2 inch Drive, Standard Length Impact Sockets, 6 Point
55 mm 90.4 mm (3.56 in) 136-5189
65 mm 102.4 mm (4.03 in) 132-8743
70 mm 107.1 mm (4.22 in) 136-5190

18 Special design for excavator track bolts; not intended for general use

104
 Ratchets and Sockets — Individual Sockets
Individual Metric Sockets, 1 in through 2 1/2 in Drive (also No. 5 Spline) (Cont'd.)
Size Length Part Number
46 mm 83 mm (3.27 in) 386-3252
1 1/2 inch Drive, Standard Length Impact Sockets, 12 Point
36 mm 84 mm (3.31 in) 386-3306
50 mm 87 mm (3.43 in) 386-3307
60 mm 95 mm (3.74 in) 386-3308
75 mm 110 mm (4.33 in) 386-3309
2 1/2 inch Drive, Impact Sockets 12 Point
95 mm 140 mm (5.51 in) 386-3313
No. 5 Spline, Standard Length Impact Socket, 6 Point
55 mm 94.5 mm (3.72 in) 159-2833

105
Ratchets and Sockets — Special Application Sockets
Fractional Hex Driver Set, 10 Piece - 214-6142
Warranty: See individual part number
• Seven 3/8 inch drive hex sockets and three 1/2 inch drive hex sockets
• Includes socket bar and clips
• Can be ordered by set or individually

Replacement
Part Number Description Hex Size Square Drive Overall Length Bit
214-6142 Hex Driver Set – – – –
Hex Driver Set Consists of:
214-7320 Drive Hex Socket 1/2 in 1/2 in 53.18 (2.09 in) 214-7321
214-7327 Drive Hex Socket 9/16 in 1/2 in 53.18 (2.09 in) 1P-3566
214-7328 Drive Hex Socket 5/8 in 1/2 in 53.18 (2.09 in) 214-7331
2P-8263 Drive Hex Socket 1/8 in 3/8 in 52.39 (2.06 in) 2P-8269
2P-8264 Socket 5/32 in 3/8 in 52.39 (2.06 in) 2P-8271
2P-8265 Socket 3/16 in 3/8 in 52.39 (2.06 in) 2P-8272
2P-8266 Drive Hex Socket 1/4 in 3/8 in 52.39 (2.06 in) 2P-8273
2P-8267 Drive Hex Socket 5/16 in 3/8 in 52.39 (2.06 in) –
2P-8268 Drive Hex Socket 3/8 in 3/8 in 53.18 (2.09 in) 2P-8275
8T-3042 Drive Hex Socket 7/32 in 3/8 in 52.39 (2.06 in) 8T-3043
Individual Socket and Hex Bit
5P-7253 Socket and Hex Bit 9/64 in 3/8 in – –

Fractional Hex Ball Driver Socket Set, 8 Piece - 246-8499

Warranty: Lifetime
• Four 1/4 inch drive hex ball sockets and four 3/8 inch drive hex ball sockets
• Material: steel
• Includes socket bar and clips
• Can be ordered by set or individually

Part Number Description Hex Size Square Drive Overall Length

246-8499 Hex Ball Driver – – –
Socket Set
Hex Ball Driver Socket Set Consists of:
243-5173 Socket 5/16 in 3/8 in 53.18 mm (2 3/32 in)
243-5174 Socket 3/8 in 3/8 in 53.18 mm (2 3/32 in)
243-5175 Socket 7/32 in 3/8 in 52.39 mm (2 1/16 in)
243-5177 Socket 1/4 in 3/8 in 52.39 mm (2 1/16 in)
243-5178 Socket 1/8 in 1/4 in 47.63 mm (1 7/8 in)
243-5179 Socket 9/64 in 1/4 in 47.63 mm (1 7/8 in)
243-5180 Socket 5/32 in 1/4 in 47.63 mm (1 7/8 in)
243-5181 Socket 3/16 in 1/4 in 49.21 mm (1 15/16 in)

106
 Ratchets and Sockets — Special Application Sockets
Metric Hex Driver Set, 9 Piece - 194-3585
Warranty: See individual part number
• Includes socket bar and clips
• Can be ordered by set or individually

Part Replacement
Number Description Hex Size Drive Bit Length Overall Length Bit
194-3585 Hex Bit Socket Set (1) – – – – –
Set Consists of:
194-3541 Metric Hex Driver 4.0 mm 3/8 in 25.4 mm 52.3 mm (2.06 in) –
194-3542 Hex Socket Bit Driver 5.0 mm 3/8 in 25.7 mm 52.6 mm (2.07 in) –
194-3544 Metric Hex Driver 7.0 mm 3/8 in 25.7 mm 52.6 mm (2.07 in) –
194-3545 Metric Hex Driver 8.0 mm 3/8 in 25.1 mm 52.1 mm (2.05 in) –
194-3546 Metric Hex Driver 10.0 mm 3/8 in 25.5 mm 52.5 mm (2.07 in) –
194-3547 Metric Hex Driver 12.0 mm 1/2 in – 81 mm (3.19 in) –
194-3548 Metric Hex Driver 14.0 mm 1/2 in – 81 mm (3.19 in) –
194-3549 Metric Hex Driver 17.0 mm 1/2 in – 93.7 mm (3.69 in) –
Optional Metric Hex Drivers
129-4552 Metric Hex Driver 27.0 mm 1 in 72.0 mm 129 mm (5.08 in) 129-4553
140-8780 (2) Metric Hex Driver (3) 24.0 mm — 50.8 mm 50.8 mm (2 in) –
168-8395 Drive Impact Socket 17.0 mm 3/4 in 50.8 mm 61.7 mm (2.43 in) 169-0782
194-3543 Metric Hex Driver 6.0 mm 3/8 in 25.7 mm 52.6 mm (2.07 in) –
1U-6151 Metric Hex Driver 17.0 mm 3/4 in 47.0 mm 92 mm (3.62 in) 1U-6152
1U-9474 Metric Hex Driver (3) 22.0 mm 1 in 32.0 mm 84 mm (3.31 in) 1U-9476
6V-9086 Metric Hex Driver (3) 14.0 mm 1/2 in 35.0 mm 81 mm (3.19 in) –
9U-7418 Metric Hex Driver 19.0 mm 3/4 in 47.7 mm 111.3 mm (4.38 in) 1U-7419

1 Warranty: Lifetime
2 Hex bit only
3 Warranty: 6 Months

107
Ratchets and Sockets — Special Application Sockets
Metric Hex Ball Driver Socket Set, 8 Piece - 243-5182
Warranty: Lifetime
• Four 1/4 inch drive hex ball sockets and four 3/8 inch drive hex ball sockets
• Material: steel
• Includes socket bar and clips
• Can be ordered by set or individually

Hex Size Part Number Description Drive Bit Length Overall Length
– 243-5182 Complete Hex Ball – – –
Driver Socket Set
Set Consists of:
3.0 mm 243-5190 Hex Ball Driver 1/4 in – 47.7 mm (1.88 in)
4.0 mm 243-5184 Hex Ball Driver 1/4 in – 47.6 mm (1.87 in)
5.0 mm 243-5185 Hex Ball Driver 1/4 in – 47.9 mm (1.89 in)
6.0 mm 243-5186 Hex Ball Driver 1/4 in – 47.9 mm (1.89 in)
7.0 mm 243-5187 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)
8.0 mm 243-5188 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)
9.0 mm 243-5189 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)
10.0 mm 243-5183 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)
Optional Metric Hex Ball Drivers
4.0 mm 4C-8996 Hex Ball Driver 3/8 in – 128.3 mm (5.05 in)
10.0 mm 155-3046 Hex Ball Driver 3/8 in – 128.3 mm (5.05 in)

Individual Fractional Hex Driver Sockets

Part Number Hex Size Square Drive Overall Length
386-3344 9/32" 3/8" 110 mm (4 1/3 in)
386-3336 3/4" 1/2" 114.3 mm (4 1/2 in)
386-3341 3/4" 3/4" 88.9 mm (3 1/2 in)
386-3342 5/8" 3/4" 88.9 mm (3 1/2 in)
386-3343 7/8" 3/4" 88.9 mm (3 1/2 in)

Drivers for TORX Screws

Warranty: Lifetime
Part Number Description Size Use
5P-3038 Socket Assembly 3/8 in square drive Removal of shaft seal and bearing retainer fasten-
ers TORX T-30 on 16G Motor Grader circle drive
motor
6V-2123 Socket Assembly 3/8 in square drive Removal of TORX T-55 screws which retain brake
cylinders to support plates on "V" Series Lift Trucks

108
 Ratchets and Sockets — Special Application Sockets
TORX Driver Set, 10 Piece - 194-3584
Warranty: Lifetime
• Ten pieces, 1/4 inch and 3/8 inch square drive
• TORXALIGN® design grips TORX fasteners for easier fastener starting (TORX and
TORXALIGN are registered trademarks of Camcar, Inc.)
• Includes socket bar and clips
• Can be ordered by set or individually

Torx Size Part Number Description Square Drive Overall Length

Complete Driver Set
– 194-3584 Torx Socket Set – –
TORXALIGN Bits
T10 194-3531 Socket, Assembly, T10 1/4 in 39.6 mm (1.56 in)
T15 194-3532 Socket, Assembly, T15 1/4 in 39.6 mm (1.56 in)
T20 194-3533 Socket, Assembly, T20 1/4 in 39.6 mm (1.56 in)
T25 194-3534 Socket, Assembly, T25 1/4 in 39.6 mm (1.56 in)
T30 194-3535 Socket, Assembly, T30 3/8 in 44.5 mm (1.75 in)
T40 194-3536 Socket, Assembly, T40 3/8 in 44.5 mm (1.75 in)
T45 194-3537 Socket, Assembly, T45 3/8 in 52.3 mm (2.06 in)
T50 194-3538 Socket, Assembly, T50 3/8 in 52.3 mm (2.06 in)
T55 194-3539 Socket, Assembly, T55 3/8 in 51.6 mm (2.03 in)
One Piece, 1/4 inch Square Drive TORX Socket included
E8 194-3540 Square Drive TORX Socket 1/4 in 22.2 mm (0.87 in)

Inverted TORX Socket Set, 10 Piece - 227-4383

Warranty: Lifetime
• TORX sockets for fuel system maintenance and repair
• Ten piece set, 1/4 inch and 3/8 inch square drive
• Socket teeth provide maximum engagement and increased gripping ability
• Each socket can be ordered separately
• Sockets should not be used with power drivers (air wrenches, etc.)
• Chrome plating prevents corrosion and cleans easily
• Includes socket rail and clips to keep sockets neatly organized
• Can be ordered by set or individually

Torx Size Square Drive Part Number Overall Length

Complete Socket Set
– – 227-4383 –
Set Consists of:
E4 1/4 in 227-4384 22 mm (0.87 in)
E5 1/4 in 227-4385 22 mm (0.87 in)

109
Ratchets and Sockets — Special Application Sockets
Inverted TORX Socket Set, 10 Piece - 227-4383 (Cont'd.)
Torx Size Square Drive Part Number Overall Length
E6 1/4 in 227-4386 22 mm (0.87 in)
E7 1/4 in 227-4387 22 mm (0.87 in)
E8 1/4 in 227-4388 22 mm (0.87 in)
E10 3/8 in 227-4389 30 mm (1.18 in)
E12 3/8 in 227-4390 30 mm (1.18 in)
E14 3/8 in 227-4391 30 mm (1.18 in)
E16 3/8 in 227-4392 32 mm (1.26 in)
E18 3/8 in 227-4393 33 mm (1.30 in)

Pin Socket - 5P-5249

Warranty: Lifetime
• Used with 3/8 inch drive speeder handle to remove and install buttons that hold
ROPS Cab headliner in position for air conditioning repairs
• Use 3F-4479 Spring Pins as replacements if spring pins (1) become worn or
damaged

Part Number Description

5P-5249 Pin Socket

Hex Socket, 55 mm (Spline Drive) - 159-2833

Model: 797 Off-Highway Trucks
Warranty: Lifetime
• Used to remove and install tires and rims using M36 bolts with 55 mm hex head
• Used with 4C-9813 Extension, 6V-6080 Torque Multiplier, 8T-5230 Air Regulated
Wrench, and 4C-9814 Reaction Bar
• Black industrial finish
• High-strength, impact socket

Part Number Hex Size Drive Overall Length Diameter

159-2833 55 mm (2 3/16 in), 12 point #5 spline 94.5 mm (3.72 in) 78.6 mm (3.09 in)

110
 Ratchets and Sockets — Special Application Sockets
Stacking Sockets (Metric)
Models: 777, 785, 789, 793, 797 Off-Highway Trucks
Warranty: Caterpillar Standard Warranty, 6 Months
• Used to tighten brake anchor nuts
• Used with hydraulic wrench systems
• Allows access to limited clearance areas
• Ensures accurately tightened anchor nuts

Part Number Description Size

203-5431 Stacking Socket female 1 5/16, male 36 mm
203-5432 Stacking Socket female 1 1/2, male 36 mm
203-5433 Stacking Socket female 36 mm, male 36 mm
203-5434 Stacking Socket female 46 mm, male 46 mm
203-5435 Stacking Socket female 55 mm, male 46 mm

Special Large Socket Wrenches

Warranty: Caterpillar Standard Warranty, 6 Months
Part
Number Description Hex Size Usable Depth
3/4 inch Drive
1B-4657 Large Socket Wrench 2.75 in 4.50 in
1U-6689 Large Socket Wrench 3.50 in 6.30 in
1U-6691 Large Socket Wrench 5.50 in 7.90 in
1U-6692 Large Socket Wrench 5.75 in 7.90 in
2B-1730 Large Socket Wrench 3.39 in 4.50 in
2B-1731 Large Socket Wrench 3.63 in 4.50 in
3B-6352 Large Socket Wrench 2.63 in 4.50 in
5P-3540 Large Socket Wrench 3.50 in 4.50 in
7M-7809 Large Socket Wrench 2.88 in 7.25 in
Bar Turn
9F-9963 Bar Turn 1.46 in 8.38 in

Lock Removal Socket

Warranty: Lifetime
• 1/2 inch drive
Part Number Size
5P-6587 1/2 in Hex
5P-6588 9/16 in Hex
5P-6589 3/4 in Hex

111
Ratchets and Sockets — Special Application Sockets
Spark Plug Sockets
SMCS Code: 1555-010
Model: G3516B (50 Hz), G3516B (60 Hz), G3520B (50 Hz), and G3500C
Warranty: Caterpillar Standard Warranty: 6 Months
• Thin wall design eliminates possible socket interference

Part Number Description Size Length Application

216-1685 Spark Plug Socket 1/2 in drive, 13/16 in, 6 103 mm overall length –
point hex
4C-4601 Spark Plug Socket 7/8 inch hex, 1/2 inch 103.1 mm (4.06 in) long Special thin wall for
square drive, 6 point use on G3500 and
G3600 Engines

112
 Ratchets and Sockets — Extensions/Adapters
Universal Joint Extension Socket
Warranty: Caterpillar Standard Warranty, 6 Months
• 1/2 inch drive
• 12 point

Part Number Size Length

6V-4058 5/8 in 182.6 mm (7.19 in)

Socket Extensions
Warranty: Lifetime

Part Number Drive Length Part Number Drive Length

9S-1720 1/4 in 50.8 mm (2 in) 271-4724 (1) 1/2 in 279.0 mm (10.98 in)
9S-1721 1/4 in 101.6 mm (4 in) 386-3271 3/4 in 76.2 mm (3 in)
8H-8574 3/8 in 76.2 mm (3 in) 8H-8548 3/4 in 203.2 mm (8 in)
8H-8575 3/8 in 152.4 mm (6 in) 8T-9265 (2) 3/4 in 254.0 mm (10 in)
3P-2240 3/8 in 304.8 mm (12 in) 8T-5183 (2) 3/4 in 406.4 mm (16 in)
271-4722 (1) 1/2 in 76.2 mm (3 in) 386-3260 1 in 76.2 mm (3 in)
5P-8676 1/2 in 76.2 mm (3 in) 5S-6076 1 in 203.2 mm (8 in)
9S-1732 1/2 in 127.0 mm (5 in) 158-8723 (3) 1 in (4) 476.0 mm (18.74 in)
271-4723 (1) 1/2 in 127.0 mm (5 in) 386-3253 1 1/2 in 203.2 mm (8 in)
8H-8559 1/2 in 279.0 mm (10.98 in)

Universal Drives
Warranty: Lifetime
• Used with Cat torque multipliers as well as other applications
5P-1749
• Use with the 5S-6076 Extension, 5P-1748 Socket, and a suitable torque multiplier
to loosen and tighten the nuts which retain 8D and 9D Ripper mounting brackets
5P-3534
• Use with a Torque Multiplier in applications such as tightening the nuts which se-
cure the final drive housings to the rear frame and case of Cat Articulated Motor
Graders

1 Impact
2 Requires locking pin
3 Double hole extension
4 Warranty: Six Months

113
Ratchets and Sockets — Extensions/Adapters
Universal Drives (Cont'd.)
Drive Part Number Torque Capacity Angular Rotation
3/4 in 5P-3534 1,000 ft lb 30 Degrees
1 in 5P-1749 1,500 ft lb 30 Degrees

Ratchet Adapter - 1P-0853

Warranty: Manufacturer, Lifetime
• 3/4 inch female to 3/4 inch male
• Used primarily with the 1P-0850 Torque Multiplier
• Convenient for other applications such as with the 3/4 inch drive 9S-7351 Torque
Wrench

Part Number Capacity

1P-0853 450 lb

Hex Shank - 4C-9818

Warranty: Lifetime
Part Number O.A.L. Size
4C-9818 2 3/4 in 7/16 in HEX x 1 1/4 in on one end with 1/2 in
square drive (male) with lock button on other
end

Universal Joint - 4C-9819

Warranty: Manufacturer
Part Number O.D. O.A.L. Size
4C-9819 1 3/18 in 2 1/2 in 1/2 in square drive (female) with
lock button hole

114
 Ratchets and Sockets — Extensions/Adapters
Socket Drive Adapters
Warranty: Lifetime
Part Replacement
Number Description Size Bit
213-4437 Socket Adapter 1/4 in Female to 3/8 in male –
261-0443 Socket Adapter 3/8 in Female to 1/4 in male 261-0446
452-0539 Socket Adapter 1/2 in Female to 3/8 in Male –
452-0541 Socket Adapter 3/4 in Female to 1/2 in Male 452-0542
261-8569 Socket Adapter 1 in Female to 1 1/2 in Male –
261-8570 Socket Adapter 1 1/2 in Female to 1 in Male –
2P-8261 Adapter 3/4 in Female to 1 in Male –
5P-3588 Socket Adapter 1 in Female to 3/4 in Male –
8H-8561 Adapter 1/2 in Female to 3/4 in Male –
8H-8576 Adapter 3/8 in Female to 1/2 in Male –

Impact Wrench Socket Adapters

Warranty: See individual part
• Heavy-duty adapter and extensions can be used with 1 1/2 inch drive impact
wrenches
• Allows the use of 1 inch drive sockets instead of the higher priced 1 1/2 inch drive
sockets

Item Part Number Description

1 9S-4028 Extension, 1 in drive both ends, 133.4 mm (5.25 in) long (5)
2 9S-4026 Adapter, 1 1/2 in to 1 in drive (5)
3 9S-4027 Extension, 1 in drive both ends, 60.3 mm (2.38 in) long (5)
Not shown 207-8160 Extension, 1 in drive, 76.2 mm (3 in) long (6)

Universal Joint
Warranty: Lifetime
Drive Part Number
1/4 in 9S-1724
3/8 in 6V-0094
1/2 in 8H-8560

5 Warranty: Manufacturer, 30 Day

6 Warranty: Lifetime

115
Cordless Power Tools
463-6821 Cordless Impact Wrench Kit (18v)
Warranty: Manufacturer, Lifetime
Cordless Impact Wrench, Two 18v Lithium Battery Packs, Charger with USB Port,
Six Cat Impact Sockets, Cat Storage Bag
• 600 ft lb (813 Nm) of torque output with 750 ft lb (1,017 Nm) of bolt breakaway
torque
• 1,900 RPM free speed with 2,280 blows per minute
• Soft-start trigger
• Uses a sintered rare earth magnet motor to deliver more torque with less battery
drain
• Built-in brake stops anvil to prevent thrown fasteners or sockets
• Integrated LED covers work area in super bright light
• Digital microprocessor controlled switch maximizes performance, runtime, and
durability
• Integrated battery management prevents battery drain and prolongs tool life
• Charge time 60 minutes/5 amp
• USB port built into charger
• Cat 1/2-inch impact sockets: 13, 19 mm and 1/2, 9/16, 3/4, 7/8 in
• Cat branded bag
• Length 9.2 in (234 mm), height 7.7 in (196 mm)
• Weight 7.3 lb (3.3 kg)
• UL, CUL, CE marked

Cordless Drill Kit (18v) - 151-0968

Warranty: Manufacturer’s
Cordless Driver/Drill, 18v Ni-Cad Battery Pack, Charger, Storage Bag
• Industrial strength gear train and heat treated alloy gears for durability and long
life
• Patented air flow system cools the motor
• Single sleeve keyless chuck for one handed bit changes
• 22-position clutch makes dialing in the right torque easy
• UL, CUL, CE marked

Part Number Description

151-0968 Cordless Drill Kit (18v)

116
 Cordless Power Tools
Heavy-Duty Angle Grinder, 11,000 RPM, 4.5 inch - 288-2512
Warranty: Lifetime
• Turns at 11,000 RPM for maximum grinding performance and efficiency
• Vibration-control side handle reduces vibration up to 60%, providing uncomprom-
ising comfort for extended periods of work
• AC/DC capability extends the versatility of the tool by working from DC outlets
such as welders and generators
• Sealed switch keeps debris out of the switch mechanism and extends switch life
• Service Minder brushes eliminate guesswork, stop the tool when preventative
maintenance is required
• Epoxy-coated field windings provide ultimate protection against abrasive dust
and metal debris
• 5/8 inch - 11 spindle for mounting most popular accessories
• Tool-free adjustable guard for quick guard installation and adjustments
• Spindle lock for quick wheel changes
• 2-position auxiliary handle specifically designed and angled to a "natural" position
for maximum comfort and control
• Double insulated, UL listed, OSHA compliant

Part Motor No Load Speed Spindle

Number Power Amps (RPM) Thread Size Wheel Size Length Net Weight
288-2512 120V AC/DC 7.5 11,000 5/8 in - 11 114.3 mm (4 1/2 in) 285.75 mm (11 1/4 in) 1.95 mm (4.3 lb)

117
Pneumatic Tools — Impact Wrenches
Composite Pneumatic Impact Wrenches
Warranty: Caterpillar, 18 months
• Composite housing for lighter weight
• 18-month warranty
• Easy to rebuild with the anvil repair kit and the motor/throttle repair kit
• CE marked
3/8 inch 266-3737
1/2 inch 266-3736

Specifications for 266-3737 3/8 in Composite Impact Wrench

Drive Size 3/8 inch
Recommended Air Pressure 90 psig (620 kPa)
Air Consumption, Free Speed 3.3 cfm (23 scfm) (93.45 l/min)
Air Consumption, Working 2.2 cfm (16 scfm) (62.3 l/min)
Free Speed, Forward 9000 rpm
Free Speed, Reverse 9500 rpm
Sound Level, Working 107.3 dBa
Blows Per Minute 1420
Maximum Torque 250 ft lb (339 Nm)
Air Inlet Thread Size ¼ in – 18 NPT
Overall Length 6.6 in (168 mm)
Weight 3.0 lb (1.36 kg)

Serviceable Parts for 266-3737 3/8 in Composite Impact Wrench

Anvil Part Number 280-2675
Motor and Throttle Repair Kit 280-2676
Anvil Repair Kit 280-2677

Specifications for 266-3736 1/2 in Composite Impact Wrench

Drive Size 1/2 inch
Recommended Air Pressure 90 psig (620 kPa)
Air Consumption, Free Speed 3.6 cfm (26 scfm) (101.9 l/min)
Air Consumption, Working 2.6 cfm (16 scfm) (73.6 l/min)
Free Speed, Forward 7000 rpm
Free Speed, Reverse 8000 rpm
Sound Level, Working 107.2 dBa
Blows Per Minute 1140
Maximum Torque (forward) 550 ft lb (746 Nm)
Maximum Torque (reverse) 600 ft lb (813 Nm)
Air Inlet Thread Size ¼ in – 18 NPT
Overall Length 7.6 in (192 mm)
Weight 4.3 lb (1.95 kg)

118
 Pneumatic Tools — Impact Wrenches
Composite Pneumatic Impact Wrenches (Cont'd.)
Serviceable Parts for 266-3736 1/2 in Composite Impact Wrench
Anvil Part Number 280-2678
Motor and Throttle Repair Kit 280-2679
Anvil Repair Kit 280-2680

Impact Wrenches, 3/8 inch

Warranty: Manufacturer, 18 Month
European Union Compliant, CE marked
• Reverse bias air motor provides greater power in reverse for extra break away
torque
• Molded ergonomic handle grip reduces vibration and operator fatigue
• Built in power regulator allows power output to be adjusted to operating conditions
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].

Drive size 3/8 in

Recommended air pressure 620 kPa (90 PSIG)
Air consumption, free speed 14 SCFM (1.9 CFM) [53.8 l/min.]
Air consumption, working 25 SCFM (3.5 CFM) [99.11 l/min.]
Free speed, forward 8000 RPM
Free speed, reverse 9000 RPM
Sound level, free speed 84.6 dBa
Sound level, working 95.6 dBa
Blows per minute 1170
Maximum Torque 251- N·m (185 ft-lb) Forward / 285 N·m (210 ft-lb) Reverse
Air inlet thread size 1/4 in - 18 NPT
Recommended hose size, ID min. 10 mm (3/8 in)
Overall length 159 mm (6.25 in)
Height 179 mm (7 in)
Width 57 mm (2.24 in)
Weight 1.70 kg (3.75 lbs)

Part Number Description Anvil Part Number

222-3048 Impact Wrench, 3/8 inch 280-2681

119
Pneumatic Tools — Impact Wrenches
Impact Wrenches, 1/2 and 3/4 inch
European Union Compliant, CE marked
• Aluminum housing reduces weight and provides durable long life
• Steel nose front for extra protection, easy service access
• Power speed regulator allows power output to be adjusted to operating
conditions
• Variable speed trigger allows operator versatility over wide range of fasteners
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or
send an email to [email protected].

Part No. 222-3050 222-3053

Drive Size 1/2 in 3/4 in
Recommended air pressure 620 kPa (90 PSIG) 620 kPa (90 PSIG)
Air consumption, free speed 30 SCFM (4.2 CFM) [118.9 l/min.] 41 SCFM (5.8 CFM) [164.2 l/min.]
Free speed forward 8000 RPM 4500 RPM
Free speed reverse 8000 RPM 5000 RPM
Sound level free speed 108 dBa 92 dBa
Maximum torque 578 N·m (425 ft-lb) forward 1626 N·m (1200 ft-lb)
Air inlet thread size 1/4 in - 18 NPT 3/8 in - 18 NPT
Recommended hose size, ID min. 8 mm (5/16 in) 10 mm (3/8 in)
Overall length 185 mm (7.3 in) 259 mm (10.2 in)
Weight 2.63 kg (5.8 lbs) 6.59 kg (14.5 lbs)

Part Number Description Anvil Part Number

222-3050 Impact Wrench, 1/2 in 280-2682
222-3053 Impact Wrench, 3/4 in 280-2683

120
 Pneumatic Tools — Impact Wrenches
Impact Wrenches, 1 inch
Warranty: manufacturer, 18 Month
European Union Compliant, CE marked
• Power speed regulator allows power output to be adjusted to operating conditions
• Variable speed trigger allows operator versatility over wide range of fasteners
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].

Part No. 222-3054 222-3055

Drive size 1 in 1 in
Recommended air pressure 620 kPa (90 PSIG) 620 kPa (90 PSIG)
Air consumption free speed 60 SCFM (8.3 CFM) [235 I/min] 60 SCFM (8.3 CFM) [235 l/min]
Air consumption working 38 SCFM (5.3 CFM) [150.1 l/min] 38 SCFM (5.3 CFM) [150.1 l/min]
Free speed forward 4000 RPM 4000 RPM
Free speed reverse 4000 RPM 4000 RPM
Sound level free speed 92 dBa 92 dBa
Sound level working 103 dBa 103 dBa
Blows per minute 500 505
Maximum torque 3796 N·m (2800 ft-lb) 4067 N·m (3000 ft-lb)
Air inlet thread size 1/2 in - 14 NPT 1/2 in - 14 NPT
Recommended hose size, ID min. 13 mm (1/2 in) 13 mm (1/2 in)
Overall length 302 mm (11.8 in) 535 mm (21 in)
Height 270 mm (10.6 in) 172 mm (6.8 in)
Width 111 mm (4.37 in) 110 mm (4.33 in)
Weight 12.05 kg (26.5 lb) 12.27 kg (27 lb)

Part Number Description Anvil Part No.

222-3054 Impact Wrench, 1 in 280-2684
222-3055 Impact Wrench, 1 in 280-2684

121
Pneumatic Tools — Impact Wrenches
Impact Wrenches Repair Kits
Warranty: Lifetime unless otherwise noted
• Used to repair current Cat branded air-powered impact wrenches
• Reduce air tool repair cost by performing in-house repairs
• Reduced downtime (no need to ship air tool to a repair center)

Typical Anvil Repair Kit Components - 231-6064

Anvil repair kit for 12.7 mm (1/2 in) Impact Wrench
Kit Includes:
2-Hammers 2-Hammer Pins
1-Hammer Case Gasket 1-Retainer O-Rings
1-Socket Retainer Material: Steel, Rubber, and Plastic
Motor and Throttle Repair Kit - 231-6063, for 12.7 mm (1/2 in) Impact Wrench
Kit Includes:
1-Detent Ball 1-Detent Spring
1-Gasket 1-Hammer Case Gasket
1-Retainer O-Ring Material: Steel, Rubber, and Plastic

Impact Wrench Anvil Part

Item Part Number Description Part Number Number
Impact Wrench Repair Kits
– 231-6041 3/8 inch Motor and Throttle Repair Kit 222-3048 –
– 231-6043 3/8 inch Anvil Repair Kit 222-3048 280-2681
– 231-6068 3/4 inch Motor and Throttle Repair Kit 222-3053 –
– 231-6070 3/4 inch Anvil Repair Kit 222-3053 280-2683
– 231-6071 1 inch Anvil Repair Kit 222-3054 280-2684
– 231-6073 1 inch Motor and Throttle Repair Kit 222-3054 –
– 231-6074 1 inch Anvil Repair Kit 222-3055 280-2684
– 231-6098 1 inch Motor and Throttle Repair Kit 222-3055 –
– 280-2676 3/8 inch Motor and Throttle Repair Kit (1) 266-3737 –
– 280-2677 3/8 inch Anvil Repair Kit (1) 266-3737 (2) 280-2675
– 280-2679 1/2 inch Motor and Throttle Repair Kit (1) 266-3736 (2) –
– 280-2680 1/2 inch Anvil Repair Kit (1) 266-3736 (2) –
1 231-6064 1/2 inch Anvil Repair Kit 222-3050 280-2682
2 231-6063 1/2 inch Motor and Throttle Repair Kit 222-3050 –

1 Warranty: Six Months

2 Warranty: Manufacturer, 18 Month

122
 Pneumatic Tools — Sanders and Polishers
Sanders and Polishers
Warranty: Manufacturer, 18 Month
European Union Compliant, CE marked
• Aluminum housing reduces weight and provides durable long life
• Compact design for easy maneuvering in restricted areas
• Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs
motor life
• Full choice of RPM ranges
• 5 inch and 7 inch HD angle, 2-handed vertical and in-line sanders
• 7 inch polisher
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected]..
Free
Speed Pad/ Recom-
Recom- Air Sound Disc mended
mended Con- Level, Spindle Size, Air Inlet Hose
Part air sump- Horse- Free Free Thread Diame- Backing Thread Size, ID Overall
Number pressure tion power Speed Speed Size ter Pad Size min. Length Height Weight
Palm Sander, 6 in
222-3063 620kPa 36 SCFM – 10000 83 dBa 5/16 in - 152 mm 231-9464 1/4 in - 8 mm (5/ 122 mm – 1.36 kg
(90 PSIG) (5 CFM) RPM 18 UNC (6 in) 18 NPT 16 in) (4.8 in) (3 lb)
[141.6 I/
min.]
7 in Angle Sander
222-3064 620kPa 34 SCFM 1 5100 84 dBa 5/8 in - 178 mm 231-9465 1/4 in - 8 mm (5/ 410 mm 102 mm 3.09 kg
(90 PSIG) (4.8 RPM 11 UNC (7 in) 18 NPT 16 in) (15.75 (4 in) (6.8 lb)
CFM) in)
[135.9 I/
min.]
7 in Vertical Sander
222-3065 620kPa 31 SCFM – 4500 83 dBa 5/16 in - 178 mm 231-9465 1/4 in - 10 mm – 190 mm 2.72 kg
(90 PSIG) (4.3 RPM 11 UNC (7 in) 18 NPT (3/8 in) (7.5 in) (6 lb)
CFM)
[121.8 I/
min.]
In-line Sander
222-3067 620kPa 16 SCFM – 1800 87 dBa – 2 3/4 x – 1/4 in - 8 mm (5/ 406 mm 121 mm –
(90 PSIG) (2.3 osc/min 17 1/2 18 NPT 16 in) (16 in) (4.75 in)
CFM)
[65.13 I/
min.]
6 in OASander
222-3068 410kPa 11 SCFM 0.25 10000 93 dBa 5/16 in - 150 mm 231- 1/4 in - 8 mm (5/ 260 mm – 2.2 kg
(60 PSIG) (2.1 RPM 18 UNC (6 in) 9468, 18 NPT 16 in) (10.2 in) (4.9 lb)
(1) CFM) 246-7509
[59.47 I/
min.]
5 in Compact Sander
222-3084 620kPa 32 SCFM 0.3 1400 88 dBa 7/16 in - 127 mm 231-9469 1/4 in - 8 mm (5/ 118 mm 121 mm –
(90 PSIG) (4.2 RPM 20 UNC (5 in) 18 NPT 16 in) (4.6 in) (4.75 in)
CFM)

1 Warranty: Six Months

123
Pneumatic Tools — Sanders and Polishers
Sanders and Polishers (Cont'd.)
Free
Speed Pad/ Recom-
Recom- Air Sound Disc mended
mended Con- Level, Spindle Size, Air Inlet Hose
Part air sump- Horse- Free Free Thread Diame- Backing Thread Size, ID Overall
Number pressure tion power Speed Speed Size ter Pad Size min. Length Height Weight
[118.9 I/
min.]
7 in Angle Polisher, Air Consumption, working: 31 SCFM (4.3 CFM) [121.8 l/min.]
222-3069 620kPa 34 SCFM 1 2600 84 dBa 5/8 in - 178 mm 231-9465 1/4 in - 8 mm (5/ 410 mm – –
(90 PSIG) (4.8 RPM 11 UNC (7 in) 18 NPT 16 in) (15.74
CFM) in)
[135.9 I/
min.]

124
 Pneumatic Tools — Grinders
Air Grinders
Warranty: Manufacturer, 18 Month
European Union Compliant, CE marked
• Aluminum housing reduces weight and provides durable long life
• Compact design for easy maneuvering in restricted areas
• Paddle-style, variable speed throttle safety trigger prevents accidental startup; easy to use, versatile
• Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs motor life
• Powerful .2 horsepower motor
• Angle head zirk grease fitting (right angle only) allows lubrication of gear train, prolongs life of tool
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send an email to catwarranty@sna-
pon.com.

Air Max Air

Con- Sound Con-
sump, Level, Operat- sump, Spindle
Air Air Inlet Hose
Part Pres- Free Horse Free Thread Size, ID Collet Overall ing Wheel Sound Under Thread
Number sure Speed power Speed Size min. Size Length Speed Capacity Weight Length Level Load Size
7 in Angle Grinder
222-3071 – 8 l/s – – – – – – 6,000 175 mm 2.7 kg 315 mm 85 dBa 17 l/s 5/8 in -
(18 cfm) RPM (7 in) (5.9 lb) (12.4 in) (35 cfm) 11
Medium Mini Die Grinder
222-3074 620 kPa 25 SCFM 0.2 91 dBa 1/4 in - 8 mm (5/ 1/4 in 165 22,000 – 1.09 kg – – – –
(90 (3.5 18 NPT 16 in) mm RPM (2.4 lb)
PSIG) CFM) (6.5 in)
[99.11 l/
min]
Right Angle Die Grinder
222-3076 620 kPa 15 SCFM 0.2 93 dBa 1/4 in - 8 mm (5/ 1/4 in 140 20,000 – .64 kg – – – –
(90 (2.1 18 NPT 16 in) mm RPM (1.4 lb)
PSIG) (1) CFM) (5.5 in)
[59.47 l/
min]
Extended Die Grinder
222-3077 620 kPa 25 SCFM 0.2 91 dBa 1/4 in - 8 mm (5/ 1/4 in 293 22,000 – 1.05 kg – – – –
(90 (3.5 18 NPT 16 in) mm RPM (2.5 lb)
PSIG) CFM) (11.5
[99.11 l/ in)
min]

1 Warranty: Six Months

125
Pneumatic Tools — Drills
Air Drills
Warranty: Manufacturer, 18 Month
European Union Compliant, CE marked
• Aluminum housing reduces weight and provides durable long life
• Compact design for easy maneuvering in restricted areas
• Contoured button style variable speed trigger is easy to use; versatile
• Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs
motor life
• Powerful, reversible .3 horsepower motor
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].
Rec- Rec-
Free om- om-
Speed Working mend- mend-
Air Air Sound Sound Spin- Air ed Drill
Level, Level, ed Drill Chuck
Con- Con- dle Inlet Hose air
Part sump- sump- Horse- Free Free Work- Thread Torque Thread Size, pres- Overall Chuck (Key-
Number tion tion power Speed Speed ing Size Range Size ID min. sure Length Weight (Key) less)
3/8 in Reversible Air Drill: Chuck Range, Diameter: 1/16 in - 3/8 in
222-3061 71 SCFM 43 SCFM 0.3 2,200.0 92 dBa 104 3/8 in - 0-4 1/4 in - 8 mm 620 199 mm .45 kg 243- 234-
(10 CFM) (6 CFM) RPM dBa 24 UNF N•m (0- 18 NPT (5/16 kPa (90 (7.83 (2.85 lb) 6496 0544
[283.2 I/ [169.9 I/ 35 in- in) PSIG) in)
min.] min.] lb)
1/2 in Reversible Air Drill
222-3062 71 SCFM 43 SCFM 0.3 900.0 97 dBa 109 3/8 in - 0-6.8 1/4 in - 8 mm 620 224.8 1.61 kg 243- 234-
(10 CFM) (6 CFM) RPM dBa 24 UNF N•m (0- 18 NPT (5/16 kPa (90 mm (3.55 lb) 6495 0545
[283.2 I/ [169.9 I/ 60 in- in) PSIG) (8.85
min.] min.] lb) in)

126
 Pneumatic Tools — Air Hammers
Air Hammer - 222-3080
Warranty: Manufacturer, 18 Month
European Union Compliant, CE marked
• Aluminum housing reduces weight and provides durable long life
• Variable speed trigger is easy to use, versatile
• Air directed exhaust
• Air line filter
• Nylon friction plugs
• Long barrel for easier access to hard to reach areas
• QC chuck
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].
Recommended
Part Recommended Air Sound Level, Blows/ Air Inlet Hose Size, ID Overall Spring Retainer
Number Air Pressure Consumption Free Speed Minute Thread Size min. Length Weight Part Number
Long Air Hammer w/QC Chuck
222-3080 620 kPa (90 PSIG) 28.5 SCFM 100 dBa 2200 1/4 in - 18 10 mm (3/8 in) 318 mm 2.5 kg 232-0756
(4 CFM) NPT (12.5 in) (5.5 lb)

Air Hammer Accessories

Warranty: Caterpillar Standard Warranty, 6 Months
• Used with 222-3080 Air Hammer
• Material: tungsten carbide steel

Part Number Description Width Length Shank Diameter Use

223-4352 Sheet Metal Ripper 5/8 in 5 in – –
223-4353 Flat Chisel 3/4 in 7 in – –
223-4354 Panel Cutter 3/4 in 6 in – Slices bushings, cylinder sleeves,
etc.
223-4355 Slitting Chisel 1 in 6 7/8 in – Cuts exhaust and tail pipes
223-4356 Weld Breaker 5/8 in 6 3/4 in – –
226-0102 Punch, 15 Degree – 228.6 mm (9 in) 10.18 mm (0.4 in) –
226-0124 Straight Punch – 228.6 mm (9 in) 10.18 mm (0.4 in) –

127
Pneumatic Tools — Ratchet
Air Ratchet - 222-3059
Warranty: Manufacturer, 18 Month
European Union Compliant, CE marked
• Aluminum housing reduces weight and provides durable long life
• Versatile, easy-to-use paddle-style trigger; variable speed trigger
• Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs
motor life
• 200 RPM free speed, 250 in-lbs torque output — fast and powerful
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].
Free Speed
Part Recommended Air Free Sound Level, Torque Air Inlet Thread Recommended Overall
Number Drive Air Pressure Consumption Speed Free Speed Range Size Hose Size Length Weight
222-3059 3/8 in 620 kPa 22 SCFM 200 RPM 95.1 dBa 7-81 N•m 1/4 in - 18 NPT 10 mm 256 mm 1.09 kg
(90 PSIG) (3.0 CFM) (5-60 ft-lb) (3/8 in) (10.43 in) (2.4 lb)

128
 Pneumatic Tools — Shears
Shears - 222-3083
Warranty: Manufacturer, 18 Month
European Union Compliant, CE marked
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected]..
Average
Recom- Air Sound Recom-
mended Con- Level, Sound Air Inlet mended
Part Air sump- Horse- Free Level, Cutting Cut Cutting Thread Hose Size, Overall
Number Pressure tion power Speed Working Capacity Width Speed Strokes Size ID min. Length Weight
222-3083 620 kPa 4 CFM 0.6 88.1 dBa 99.6 dBa 1.2 mm 5.6 mm 4.572 m 2500 per 1/4 in - 8 mm (5/16 254 mm 1.3 kg
(90 [113.3 I/ (3/64 in) (7/32 in) (15 ft) minute 18 NPT in) (10 in) (2.8 lb)
PSIG) min.] per
minute

Pneumatic Snap Ring Tool - 430-4389

Warranty: Manufacturer, One Year
• Light weight
• Easy to use
• Ergonomic design
• Handles snap rings 0.25 - 6 inch (0.6 - 15 cm)

Description Part Number

Snap Ring Tool 430-4389
Replacement Tips (Warranty: Caterpillar Standard Warranty, 6 months)
Straight 430-4392
45-degree Angle 430-4394
90-degree Angle 430-4396

129
Pneumatic Tools — Engraver
Air Engraver - 223-1154
Warranty: Caterpillar Standard Warranty, 6 Months
European Union Compliant, CE marked
Air Engraver Needles
• Punch 3/16 inch diameter starting hole
• Material: tungston carbide steel
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].
Recom- Overall
Recom- Average Air mended Length
Part mended Air Consump- Air Inlet Hose Size, Without
Number Description Pressure tion Free Speed Sound Level Thread Size ID min. Hose Length Hose Weight
223-1154 Air Engraver 620 kPa (90 7 SCFM (1.0 14000 RPM 90.0 dBa 1/4 in - 18 10 mm 1,511 mm 140 mm .22 kg (.48 lb)
PSIG) CFM) NPT (3/8 in) (59.49 in) (5.5 in)
Air Engraver Needles
223-4357 Needle, – – – – – – – – –
Coarse
223-4358 Needle, – – – – – – – – –
Medium
223-4359 Needle, Fine – – – – – – – – –

130
 Pneumatic Tools — Air Guns
Safety Air Guns
Warranty: Caterpillar Standard Warranty, 6 Months
High Power Extension Air Gun
• Versatile tool ideal for cleaning hard-to-reach locations
• Good for cleaning benchtops, workstations, machinery, and equipment
• Venturi tip increases the power and limits static pressure to less than 207 kPa (30
PSI) when tip is blocked
• Includes durable cast aluminum, pistol-style body, aluminum extension, and zinc
alloy nozzle
• 1/4 inch FNPT inlet
• Meets OSHA standards

Part Number Description Size

156-0930 Safety Air Gun 61 cm (24.0 in)
156-0931 Safety Air Gun 91 cm (36.0 in)
156-0932 Safety Air Gun 122 cm (48.0 in)

Jet Guard Safety Air Gun - 441-5255

Warranty: Manufacturer, one year
• Safety air shield – patented protective air cone protects operator
from chip fly-back
• Delivers high thrust with pinpoint accuracy
• Adjustable air volume – from a “blast” to a “whisper”
• Ergonomic, pistol grip handle provides maximum comfort
• Wide comfort trigger
• Built in hanger for easy storage
• Pinned, tamper proof nozzle
• Durable cast aluminum body
• 1/4 inch NPT/BSPT inlet
• Specs at 100 psi (6.9 bar)
– Operating pressure 40-120 psi (2.8 – 8.3 bar)
– Output thrust: 0.4 lbs (1.8 N)
– Noise level: 102 dBA
– Air usage: 35 cfm (991 l/m)
– Weight: 0.6 lbs (272 g)
• Meets OSHA standards
• CE marked

131
Pneumatic Tools — Air Guns
Jet Guard Safety Air Gun
Warranty: Caterpillar Standard Warranty, 6 Months
• Patented protective air cone protects operator from chip fly-back
• Delivers high thrust with pinpoint accuracy
• Knurled adjusting nut controls air volume
• Ergonomic pistol grip and trigger reduce hand fatigue
• Good for cleaning machine tools and other production equipment
• Built in hanger for easy storage
• Durable cast aluminum body
• 1/4 inch NPT inlet
• Meets OSHA standards

Part Number Description

156-0927 Jet Guard Safety Air Gun

Safety Blow Guns

Warranty: Caterpillar Standard Warranty, 6 Months
• Supplies non-aspirating, high velocity, sharply defined, collimated air stream par-
ticularly suited for cleaning small blind holes and cavities
• Complies with OSHA standard 1910.242(b) for dead-ended nozzle pressure and
noise limitation
• For use with inlet pressure up to 150 psig
• Lightweight all metal construction
• 1/4 inch FNPT inlet

Part Number Description Test Lab Listing

4C-3302 Air Blow Gun w/Nozzle Assembly UL/FM
4C-3304 Nozzle w/152 mm (6 in) Extension —

Gun Vac®
Warranty: Caterpillar Standard Warranty, 6 Months
• Rugged aluminum construction
• Uses standard shop compressed air
• No motor, wires, or electrical fields
• Creates twice the vacuum suction of conventional electric shop vacuums
• Reusable collection bag
• Includes brush and 23 cm (9 in) crevice tool
• Accepts all 1-1/4 inch vac accessories
• 1/4 inch NPT inlet

132
 Pneumatic Tools — Air Guns
Gun Vac (Cont'd.)
Part Number Description
4C-6774 Gun Vac, 551 x 1034 kPa (80-150 PSI)
4C-6775 Reusable Bag, 190 mm x 343 mm (7 1/2 in x 13 1/2 in)
4C-6776 Extension, 457.2 mm (18 in)

133
Pneumatic Tools — Spray Guns
Pneumatic Syphon Spray Gun - 441-5254
Warranty: Manufacturer, one year
• Ideal for oils, solvents, water, and other liquids
• Ergonomic, rugged, cast aluminum pistol grip designed for heavy-
duty use
• High vacuum syphon delivers up to 45 L (12 gal) per hour
• 305 mm (12 in) extension for accessing difficult, hard-to-reach areas
• Wide comfort trigger
• Adjustable trigger and nozzle tip control volume and spray pattern
• Brass nozzle tip
• 1/4 inch NPT/BSPT inlet
• Specs at 100 psi (6.9 bar)
– Operating pressure 40-120 psi (2.8 – 8.3 bar)
– Flow rate: 16 gph (1 l/m)
– Air usage: 9 cfm (255 l/m)
– Weight: 1.5 lbs (680 g)
• CE marked

Pneumatic Syphon Spray Gun - 4C-5746

Warranty: Caterpillar Standard Warranty, 6 Months
• Ergonomic, rugged, die cast aluminum pistol grip designed for heavy-duty use
• High vacuum syphon delivers up to 45 L (12 gal) per hour
• 304.8 mm (12 in) extension for accessing difficult, hard-to-reach areas
• Adjustable trigger and nozzle tip control volume and spray pattern
• 183 cm (6 ft) 1/4 inch PVC feed
• Brass nozzle tip
• 1/4 inch NPT inlet
• Meets OSHA standards

Part Number Description

4C-5746 Pneumatic Syphon Spray Gun

Spray Gun Canister

Warranty: Caterpillar Standard Warranty, 6 Months
• 0.94 L (1 qt) canister attaches to spray gun eliminating feed tubes and buckets
• Increased mobility reduces the risks of spills

Part Number Description

4C-6778 Spray Gun Canister

134
 Pneumatic Tools — Spray Guns
Pneumatic Oil Gun
Warranty: Caterpillar Standard Warranty, 6 Months
• Ergonomic, rugged, die cast aluminum construction pistol grip designed for
heavy-duty use
• High vacuum syphon delivers up to 49.2 L (13 gal) per hour
• 304.8 mm (12 in) extension for accessing hard-to-reach areas
• Adjustable trigger and nozzle tip control volume and spray pattern
• 0.95 L (1 qt) steel, reusable dispenser eliminates feed tubes and buckets
• Good for lubricating trucks, automobiles, construction equipment, and machinery
• 1/4 inch NPT inlet
• Meets OSHA standards
• Conforms to MIL-O-14 559C
Part Number Description
4C-6779 Pneumatic Oil Gun

135
Torque Tools — Torque Wrenches, Adapters, and Extensions
Cat Electronic Torque Wrenches
Warranty: Manufacturer, 1 Year
• Just the set torque and the wrench will beep and flash a green light when the de-
sired torque is reached
• Torques clockwise and counterclockwise
• Provides torque angle
• Easy-to-read display shows torque in real time
• 15-Degree Flex Ratcheting Head
• Push Button Socket Release
• Ergonomically designed molded non-slip rubber grip
• Remembers last unit and torque setting
• Scales include: foot pounds, inch pounds, kilogram centimeters, or newton
meters
• Comes with a case
• N.I.S.T. traceable certificate of calibration
• CE-marked
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or
send an email to [email protected].

Part Number Drive Accuracy Head Type Torque Range Length

384-6821 3/8 in ± 2% CW / ± 3% CCW Flex Ratchet 13.6 N·m - 135.6 N·m 17 in (43 cm)
(5 ft-lb - 100 ft-lb)
384-6822 1/2 in ± 2% CW / ± 3% CCW Flex Ratchet 33.8 N·m - 338 N·m 27 in (68 cm)
(25 ft-lb - 250 ft-lb)

136
 Torque Tools — Torque Wrenches, Adapters, and Extensions
Click Type Torque Wrenches
Warranty: Manufacturer, 90 Day
Style A
• Work only in the right-hand or clockwise direction, and are guaranteed to be accu-
rate within 4% of setting of the top 80% of the scale
• Easily adjusted by a small calibrated dial along the wrench arm
• Eliminates the need to reduce the torque setting to the low end of the scale for stor-
age in order to retain accuracy
• The 162-8718 Torque Wrench can be disassembled into three components for stor-
age in a tool box
• Includes a certificate of calibration
Style B
• Work in both right and left-hand (clockwise and counter-clockwise) directions
• Micrometer handle style adjustment
• These wrenches are labeled in both ft-lbs and N•m
• Includes a certificate of calibration
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].
Minimum Max.
Part Torque Torque Head Head Head Case Kit Part Kit Part
Style Number Range Range Drive Accuracy Type Increments Length Width Depth Included Number Number
A 162-8718 271 N·m 813.5 N·m 3/4 ±4% Detach- 13.6 N·m 1219.2 60.32 31.75 – 160-6390 260-3766(2)
(200 ft-lb) (600 ft-lb) Ratchet (10 ft-lb) mm mm (2 mm (1 (1)
(48 in) 3/8 in) 1/4 in)
A 4C-5492 27.1 N·m 135.6 N·m 3/8 ±4% Flex- 2.71 N·m 447.67 28.57 14.28 Yes 4C-5819(1) 260-3764(2)
(20 ft-lb) (100 ft-lb) Ratchet (2 ft-lb) mm mm (1 mm (9/
(17 5/8 in) 1/8 in) 16 in)
A 8T-9293 54.5 N·m 341.67 N·m 1/2 ±4% Flex- 6.8 N·m 591.97 41.27 19.05 Yes 5P-7429(1) 260-3765(2)
(40 ft-lb) (252 ft-lb) Ratchet (5 ft-lb) mm mm (1 mm (3/
(22 1/8 in) 5/8 in) 4 in)
B 386-3340 1.4 N·m 5.4 N·m 1/4 ±4% CW, Fixed 1.35 N·m 258 mm – – Yes – –
(0.83 ft-lb) (4.2 ft-lb) ±6% CCW Ratchet (1 ft-lb) (10.2 in)
B 214-7349 27.1 N·m 203.6 N·m 1/2 ±6% Fixed 1.4 N·m 469.9 mm – – Yes 214-7350 –
(20 ft-lb) (150 ft-lb) Ratchet (1 ft-lb) (18.5 in)
B 9U-5006 40.7 N·m 339.3 N·m 1/2 ±6% Fixed 1.4 N·m 539.6 mm – – Yes – –
(30 ft-lb) (250 ft-lb) Ratchet (1 ft-lb) (21.25 in)
B 9U-5007 135.7 N·m 814.2 N·m 3/4 ±6% Fixed 7.0 N·m 1092.2 – – Yes – –
(100 ft-lb) (601 ft-lb) Ratchet (5.2 ft-lb) mm
(45 in)
B 9U-5019 6.8 N·m 101.8 N·m 3/8 ±6% Fixed 0.7 N·m 393.7 mm – – Yes – –
(5 ft-lb) (75 ft-lb) Ratchet (0.5 ft-lb) (15.5 in)
B 9U-5020 13.6 N·m 135.7 N·m 3/8 ±6% Fixed 0.7 N·m 393.7 mm – – Yes – –
(10 ft-lb) (100 ft-lb) Ratchet (0.5 ft-lb) (15.5 in)
B 386-3348 271.2 N·m 1355.8 N·m 1 ±4% CW, Fixed 6.8 N·m 1753 mm – – Yes – –
(200 ft-lb) (1000 ft-lb) ±6% CCW Ratchet (5 ft-lb) (69 in)

1 Service Kit for ratchets that have brand on the head

2 Service Kit for ratchets that do not have brand on the head

137
Torque Tools — Torque Wrenches, Adapters, and Extensions
Dial Type Torque Wrenches
Warranty: Lifetime
• Accuracy within 2% of the reading within the upper 80% of the scale
• Wrenches with follow-up needle use two pointers on the dial which move as one as
long as pressure is applied and one remains at the maximum torque reading until
reset
• Wrenches with light indicator features a light which comes on when the torque set-
ting is reached
• Work in both right and left-hand (clockwise and counter-clockwise) directions
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].
Light
Part Torque Metric English Needle Indicator Case
Number Range Drive U.S. Drive Accuracy Graduations Increments Length Included Included Included
9S-7351 800.0 N·m 600 ft-lb 3/4 in ±2% 20.0 N·m 10 ft-lb 103.9 cm (40.9 in) – Yes –
9S-7352 480.0 N·m 350 ft-lb 3/4 in ±2% 10.0 N·m 5 ft-lb 75.9 cm (29.9 in) Yes – –
9S-7353 230.0 N·m 175 ft-lb 1/2 in ±2% 10.0 N·m 2.5 ft-lb 47.6 cm (18.75 in) Yes – –
9S-7354 34.0 N·m 300 in-lb 3/8 in ±2% 1.0 N·m 5 in-lb 25.2 cm (9.9 in) Yes – –
9U-5017 35.0 N·m(3) 300 in-lb 3/8 in ±4% 1.0 N·m 5 in-lb 25.4 cm (10.0 in) Yes – Yes

Heavy-Duty Box Wrenches

Warranty: Lifetime
• Used for fasteners in inaccessible places, such as track roller guard bolts, where a
torque wrench and standard socket cannot be used
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].

Part Number Hex Size Straight/Config. Offset Torque

262-2758 20 mm 12 pt straight 650 ft-lb
262-2759 30 mm 12 pt straight 650 ft-lb
4C-9563 24 mm 12 pt straight 650 ft-lb
6V-4165 19 mm 12 pt straight 650 ft-lb
6V-4166 7/8 in 12 pt straight 650 ft-lb
6V-4167 15/16 in 12 pt straight 650 ft-lb
6V-4168 1 1/8 in 12 pt straight 650 ft-lb
6V-4169 1 5/16 in 12 pt straight 650 ft-lb
6V-4171 15/16 in 12 pt 15° offset –

3 Warranty: Manufacturer, 90 Day

138
 Torque Tools — Torque Wrenches, Adapters, and Extensions
Heavy-Duty Box Wrenches (Cont'd.)
Part Number Hex Size Straight/Config. Offset Torque
Shown Below
6V-4154 1 1/2 in 12 pt straight 650 ft-lb

Torque Wrench Extensions

Warranty: Lifetime
• Has an effective length of 610 mm (24 in) and a capacity up to 884 N•m (650 ft-lb)
• A slide rule type torque computer, Form SEHS7150, is available to determine the
torque wrench dial reading for different extensions

Part Number Description

6V-3146 Tubular Extension
6V-4154 Heavy-Duty Box Wrench
6V-4170 Adapter, 3/4 inch, Sq. Drive

Adapters and Extensions for Torque Wrenches

Warranty: Lifetime
• The 8S-5131 and 1P-2382 Adapters are used with the 9S-7353 or 9U-
5014 Torque Wrench
• The 8F-4677 Extension and 8F-4678 Adapter are used with the 9S-7352
or 9U-5015 Wrench to increase the capacity of the wrench

Part Number Description Use

156-2568 Adapter, 3/8 inch drive, 10 mm, 12 point box end –
1P-2382 Adapter (1/2 inch Drive, 3/4 inch 12 Point Box End) for universal joint bolts on all tractor-scrapers (except 613) and No. 16 Mo-
tor Graders
5P-0166 Crowfoot Wrench (3/8 inch Drive, 3/4 inch Hex) for torquing fuel line nuts on D3 Tractors, 910 Wheel Loaders and 931 Track
Loaders
8F-4677 Extension, 3/4 inch Drive, 26 7/8 inch center to center use to double capacity of 8F-4675 and 9S-7352 Torque Wrenches for torque
applications up to 700 ft.lb.
8F-4678 Adapter Driver (3/4 inch Drive) for use with 8F-4677 Extension
8T-3196 Offset Box Wrench 3/4 inch Drive, 1 7/8 inch Hex, 12 pt
9U-6282 Crankshaft Main Bearing on 3054 and 3056 Engines. –
1/2 inch Sq. Drive, 15/16 inch Hex, 12 pt
386-3349 Offset Handle 1/2 inch square drive; 375 mm (14.76 in) offset; 559 mm (22 in) long
317-2806 1/2 in Drive Adapter with 5/8 inch Box End –

139
Torque Tools — Torque Wrenches, Adapters, and Extensions
Special Torque Wrench Extensions
Warranty: Lifetime
• Extensions listed below are used with the 6V-9451 Tubular Arm, and the 9S-7352
Torque Wrench primarily for applications up to 1000 ft-lb (1360 N·m)
• A torque computer (376-4937), can be used to compute the correct torque
wrench reading for proper torque application at the fastener

Part Number Description Use

6V-9451 Tubular Arm –
6V-9454 Wrench, 1 7/8 inch Tighten mounting stud nuts on 55, 56, 57, 58 and 59 Towing
Winches.
6V-9455 Wrench, 1 7/8 inch Tighten mounting stud nuts on 55 and 56 Towing Winches
6V-9456 Wrench, 1 11/16 inch Tighten steering cylinder tie rod bolt nut on No. 16G Motor
Graders.
435-3382 Wrench, 1 1/4 inch –

Torque Computer - 376-4937

Warranty: Caterpillar Standard Warranty, 6 Months
• Used for calculating proper torque when using an extension with analog and digi-
tal torque wrenches

Part Number Description

376-4937 Torque Computer

140
 Torque Tools — Torque Testers
Degree Wheel - 8T-3052
Warranty: Lifetime
• Used for measuring torque turn angles
• The nut or bolt does not have to be marked in order to obtain the correct torque

Part Number Description Size

8T-3052 Degree Wheel 1/2 in drive; can be used with any stand-
ard 1/2 in drive socket

Mechanical Torque Tester - 1P-7460

Warranty: Manufacturer, Lifetime
• Torque wrenches can be checked quickly and easily
• Furnished with 3/8 inch, 1/2 inch and 3/4 inch adapters to accommodate Cat tor-
que wrenches
• Certified accuracy is ±1% or one scale division, whichever is greater

Part Number Description Torque Range

1P-7460 Mechanical Torque Tester 680.0 N·m (502 ft-lb)

141
Torque Tools — Torque Testers
Electronic Torque Testers
Warranty: Manufacturer, 90 Day
European Union Compliant, CE marked
• Accuracy better than 1% of the indicated value in ranges between 10% to 100% of
maximum rating
• Maximum overtorque of 120% of full rating
• Reliable "first-peak" mode for tests of click type torque wrenches without the need
for manual sensitivity adjustment—a red light and buzzer indicate capture of first
torque peak. Other modes include "peak hold" which records the highest reading
during a test and "track" which displays continuously during use.
• Equally accurate in clockwise and counter-clockwise directions
• Automatic or manual display reset
• Unique adjustable head moves for easy reading
• Rechargeable battery with 110 V AC adapter included (not available separately)
Note: Use 9U-5101 mounting bracket to mount the testers to a bench top. No bracket
is required to mount testers to a vertical surfaces.
Repair Information
The Tool Repair Center can help with questions about repair options, calibration
details, or general customer service needs.
Call +1(262) 656-4769 worldwide or in North America, toll-free at (855) 351-0926 or send
an email to [email protected].

Part Number Torque Range Drive U.S. Size

9U-5009 12 to 57 N·m 10 to 50 in-lb 1/4
9U-5010 57 to 282 N·m 50 to 250 in-lb 3/8
9U-5011 226 to 1130 N·m 200 to 1000 in-lb 3/8
9U-5012 68 to 339 N·m 50 to 250 ft-lb 1/2

142
 Grease Guns
Megaboost Lock-n-Load Grease Gun - 385-1742
Warranty: Manufacturer, five years
• Threadless quick connect barrel makes for fast and easy reloads
• Dual piston design gives the gun two modes, Volume mode and Megaboost mode
• Megaboost mode delivers 10,000 PSI to clear blocked zerks
• Automatic bleeder
• 3-way loading
• Ergonomic handle
• High pressure 4-jaw coupler

Part Number Description

385-1742 Megaboost Lock-n-Load Grease Gun

Workforce Pro Grease Gun - 385-1743

Warranty: Manufacturer, five years
• Threadless quick connect barrel makes for fast and easy reloads
• Automatic bleeder
• 3-way loading
• Ergonomic handle
• High pressure 4-jaw coupler

Part Number Description

385-1743 Workforce Pro Grease Gun

Lever Grease Gun, Model Pro "L" - 8F-9866

Warranty: Caterpillar Standard Warranty, 6 Months
• Heavy-duty construction
• Cast iron head equipped with a check valve and an air-bleed valve
• Spring primed
• Two way loading
• Uses standard Cat Grease cartridges (14.5 oz)
• Lever gun will operate with partial lever strokes for use in close quarters
• Zinc plated
• Cat branded
• Maximum operating pressure of assembly: 68,948 kPa (10,000 PSI)

143
Grease Guns
Lever Grease Gun, Model Pro "L" - 8F-9866 (Cont'd.)
Part Number Description
8F-9866 Cat Pro "L" Grease Gun (1)
8F-9866 Consists of
190-1668 Coupler
190-1669 Hose Assembly, 12 in long
Optional
190-5623 Hose Assembly, 18 in long
Service Parts for Noncurrent 8F-9866 (This model is not marked Pro L and uses the 2M-2689
or 190-1670 Coupler with a check valve)
190-1670 Coupler (valve with steel insert)
2M-2689 Coupler (valve with rubber insert)
9F-2636 Nozzle Assembly (2)
9F-2637 Nipple (part of 9F-2636)

Pistol Grip Grease Gun - 190-5622

Warranty: Caterpillar Standard Warranty, 6 Months
• Heavy-duty construction
• Cast iron head equipped with a check valve and an air-bleed valve
• Spring primed
• Two way loading
• Uses standard Cat Grease cartridges (14.5 oz)
• Lever gun will operate with partial lever strokes for use in close quarters
• Zinc plated
• Cat branded
• Maximum operating pressure of assembly: 31,026 kPa (4,500 PSI)

Part Number Description

190-5622 Pistol Grip Grease Gun
Grease Gun Consists of:
190-1668 Coupler
190-5623 Hose Assembly, 18 in long
Optional
190-1669 Hose Assembly, 12 in long

1 Warranty: Six Months

2 Warranty: Manufacturer, 30 Day

144
 Grease Guns
Electric Grease Gun
Warranty: Manufacturer, one year
• 20v, 1.5 Ah lithium-ion grease gun
• 10,000 psi maximum
• Two-flow rates: High - 6oz (170g) per minute and Low - 3.2oz (90.7oz) per minute
• Delivers up to 15 cartridges per hour on a single charge
• 70-min battery recharge
• LCD displays:
– Grease meter in ounces or grams
– Grease level gauge
– Battery level gauge
– Troubleshooting information
• Built-in LED flashlight
• Carrying case

Part Number Description Charger Voltage

463-3105 20v, 1.5 Ah lithium-ion grease gun 110v, 60hz
463-3106 20v, 1.5 Ah lithium-ion grease gun 220v, 50hz

Cordless Electric Grease Gun - 241-0706

Warranty: Manufacturer, 1 Year
• 12 Volt cordless, rechargeable grease gun
• Custom carrying case holds grease gun with battery, battery charger, and two
grease cartridges (grease not included)
• 12 Volt motor delivers consistent grease flow up to 41368 kPa (6000 PSI)
• Works great in construction and agricultural field conditions
• Provides faster, more effective lubrication (reduces mechanic's fatigue when lu-
194-3560 bricating large numbers of grease fittings)
• Three-way loading to fit your needs and equipment (suction, filler pump, and
cartridge)
• Uses standard 14 ounce cartridges
• Comes with a 76 cm (30.0 in) flex hose with spring guards
• One hour "fast charge" charges batteries quickly; trickle charge keeps batteries
fully charged when placed in charger

Specifications
Motor 12 Volt
Battery high-capacity, 12 Volt NiCad
Pressure capacity 41368 kPa (6000 PSI)
Charge time 1 hour (110 V, 60 Hz)
Front outlet fitting 7/16 inch UNEF

145
Grease Guns
Cordless Electric Grease Gun - 241-0706 (Cont'd.)
Specifications
Filler nipple thread 1/8 inch NPT
Lubricating capacity (under normal conditions) 3 cartridges minimum
Battery capacity 1300 m-A hour
Battery charger 110 Volt

Part Number Description

241-0706 Grease Gun Group with 2 Batteries
274-1677 Battery Charger
207-2736 Hose Assembly, 762 mm (30 in)

146
 Cat Screwdrivers
Screwdriver Set, 5 Piece - 233-1640
Warranty: Lifetime
• Exclusive high-tech handle for a more comfortable grip and more powerful
performance

Part Number Size Description

233-1640 – Screwdriver Set
Set Consists of:
6V-7932 3/8 in tip, 342.1 mm (13.47 in) long Standard Screwdriver
6V-7933 5/16 in tip, 277.11 mm (10.91 in) long Standard Screwdriver
6V-7934 No. 2 Phillips tip, 213.6 mm (8.41 in) long Phillips Screwdriver
6V-7936 No. 1 Phillips tip, 162.9 mm (6.66 in) long Phillips Screwdriver
6V-7937 3/16 in tip, 260 mm (9.44 in) long Standard Screwdriver

Screwdriver Set - 9U-7290

Warranty: Lifetime
• Exclusive high-tech handle design for a more comfortable grip and more powerful
performance

Part Number Description Size

9U-7290 Screwdriver Set Includes a flat 1/4 in tip and #1 Phillips

Black Plastic Handle Screwdriver Set, 6 Piece - 162-7804

Warranty: Lifetime
• Black plastic handles
• 6-piece set
• Includes vinyl pouch

Item Part Number Tip Size Description

– 162-7804 – Complete Screwdriver Set
Complete Set Consists of:
1 6V-7937 3/16 in Standard Screwdriver
2 6V-7935 1/4 in Standard Screwdriver
3 6V-7933 5/16 in Standard Screwdriver
4 6V-7932 3/8 in Standard Screwdriver
5 6V-7936 No. 1 Phillips Screwdriver
6 6V-7934 No. 2 Phillips Screwdriver

147
Cat Screwdrivers
Black Plastic Handled Screwdrivers
Warranty: Lifetime
• Nickel/chrome-plated blades with vapor-blasted tips for best possible grip on
screws
• Heavy duty, high impact handle

Part Number Tip Size Length

Standard Tip, Round Shank Screwdrivers
277-8790 1/2 in 469.0 (18.47 in)
6V-7932 3/8 in 342.1 mm (13.50 in)
6V-7933 5/16 in 277.1 mm (10.91 in)
6V-7935 1/4 in 212.8 mm (8.38 in)
6V-7937 3/16 in 239.8 mm (9.44 in)
6V-7938 1/4 in 100.1 mm (3.94 in)
6V-9124 1/8 in 120.7 mm (4.75 in)
Phillips Tip, Round Shank Screwdrivers
214-7342 No. 3 276.4 mm (10.88 in)
6V-7934 No. 2 213.6 mm (8.41 in)
6V-7936 No. 1 169.2 mm (6.66 in)

Ratcheting Screwdriver, 5 Bits - 9U-7291

Warranty: Lifetime

Part Number Description Size Length

9U-7291 Ratcheting 3/16 in and 9/32 in flat tips, #1 and #2 222.25 mm (8 3/4 in) long overall;
Screwdriver Phillips, and #10 Torx stored in hollow 96.04 mm (3 25/32 in) stainless steel
handle shank length

32-Piece Screwdriver Set 386-3366

Warranty: Caterpillar Standard Warranty, Six Months
• Cushion grip handle
• Strong magnetic grip holds bit securely
• Blast finished tip for added grip
32 Bits Included
Adapter Hex Tamper Torq Torx Tri-wing
1/4 in square to 3/32, 7/64, 1/8, 9/64, 5/32, 4, 6, 8, 10 6, 8, 10 T7, T8, T10, T15, T20, T25, 1, 2, 3, 4
1/4 in hex 3/16 in and 2, 2.5, 3, 4, 5 mm T27, T30, T40

148
 Cat Screwdrivers
Insulating Screwdriver
Warranty: Caterpillar Lifetime Warranty
• Insulated design with no conductive path to user
• Durable construction with nothing to tear, puncture, or wear away
• Individually tested to protect up to 1,000 volts AC and 1,500 volts DC

Part Number Description Sizes

386-3369 Insulated Screwdriver 3 mm Flat
386-3370 Insulated Screwdriver 3 mm Flat

Nutdrivers
Warranty: Caterpillar Lifetime Warranty
Part Number Description Sizes
386-3371 (1) Nutdriver 7/32 in (5.5 mm)
386-3372 Nutdriver 7 mm (0.28 in)

Torx Driver Set

Warranty: Caterpillar Lifetime Warranty
• Ergonomic, durable handles
• Vapor-blasted tips for better grip
• Nut-shaped bolster for hard-to-turn fasteners
• Available as a set or individually

Part Number Description Size

431-1522 9-piece Torx Driver Set –
Individual Drivers
431-1520 Torx Driver T8
431-1524 Torx Driver T10
431-1515 Torx Driver T15
431-1521 Torx Driver T20
431-1518 Torx Driver T25
431-1516 Torx Driver T27
431-1514 Torx Driver T30
431-1519 Torx Driver T40
431-1517 Torx Driver T45

1 Caterpillar Warranty: Six Months

149
Cat Screwdrivers
Torx Driver
Warranty: Caterpillar Lifetime Warranty
• Wide tri-lobe design
• Comfortable handle
• Durable nickel chrome plating

Part Number Description Sizes

386-3373 Torx Driver T10

Tool Bit Set, 6 Piece - 9U-7328

Warranty: Caterpillar Standard Warranty, 6 Months
• High impact, pocket-sized ABS plastic case
• Convenient magnetic bit holder (to fit power drills or for use with the case as a
hand-held screwdriver) is included

Part
Number Description Contents
9U-7328 Tool Bit Set Includes #1, #2, and #3 Phillips and 6.5 mm x 1.2 mm,
6.0 mm x 1.0 mm, and 5.5 mm x 0.8 mm flat tips

Off-Set Slotted Screwdriver - 5P-0302

Warranty: Caterpillar Lifetime Warranty
• Handy for removing slotted screws in areas with limited access

Part Number Description

5P-0302 Off-Set Slotted Screwdriver

150
 Cat Pliers
Yellow Grip Pliers Set, 3 Piece - 233-1639
Warranty: Lifetime
• Hardened cutting edges stay sharper longer and cut with less effort
• Machined cutter heads for matched blades
• Vinyl grip

Part Number Description Length

233-1639 Pliers Set –
Pliers Set Consists of:
6V-6192 Slip Joint Pliers 208 mm (8 in)
6V-6193 Diagonal Cutting Pliers, 44.45 cm (17 1/2 in) 185.7 mm (7.30 in)
6V-6194 Needle Nose Pliers 181.1 mm (7.13 in)

Cat Locking Pliers Set, 5 Piece - 316-0707

Warranty: Caterpillar Lifetime
• Heavy Duty Locking pliers
• Reinforced teeth
• Cat branded

Part Number Description Length

316-0707 Locking Pliers Set with rollup pouch –
Set Components:
316-0702 Straight jaws - 1 5/32 in (3 cm) 5 in (13 cm)
316-0703 Curved jaws 1 5/8 in (4 cm) 7 in (17 cm)
316-0704 Hose clamping jaws with curved, straight, and clamp sections — 1 10 in (25 cm)
5/32 in (3 cm)
316-0705 Curved jaws with cutter 2 7/16 in (6 cm) 10 in (25 cm)
316-0706 Straight jaws 7 7/16 in (6 cm) 10 in (25 cm)

Combination and Multiple Position Pliers

Warranty: Lifetime unless otherwise noted

Typ- Part Vinyl

e Number Description Length Finish Grip
A 213- Combination Pliers 159.3 mm (6.30 in) Chrome Yes
1983
A 6V-6192 Slip Joint Pliers 190.5 mm (7.50 in) Black Oxide Yes
B 214- Multiple Position Pliers 304.8 mm (12.00 Chrome Yes
7347 in)

151
Cat Pliers
Combination and Multiple Position Pliers (Cont'd.)

Typ- Part Vinyl

e Number Description Length Finish Grip
B 236- Multiple Position Pliers (1) 400.0 mm (16.00 Chrome Yes
1169 in)
B 6V-6195 Interlocking Joint Pliers 235.0 mm (9.30 in) Black Oxide Yes
C 6V-6194 Needle Nose Pliers 181.1 mm (7.13 in) Black Oxide Yes
D 6V-6193 Diagonal Cutting Pliers, 185.7 mm (7.30 in) Black Oxide Yes
44.45 cm (17 1/2 in)

Soft Jaw Pliers – 6V-0006

Warranty: Caterpillar Standard Warranty, Six Months
• Soft Jaw Pliers with Urethane Jaw Inserts
• Four pivot positions from 3/4 inch to 2 1/4 inch
• High carbon steel with vinyl grips
• Non marring

Part Number Description Length

6V-0006 Soft Jaw Pliers 10 in (254 mm)

Retaining Ring Pliers

Warranty: Caterpillar Standard Warranty, 6 Months
Item Part Number No. Tip Size Type
Straight Tips
1 1P-1863 No. 26 0.12 in External
2 1P-1861 No. 25 0.09 in Internal
3 1P-1857 No. 23 0.07 in Internal
4 1P-1855 No. 22 0.04 in External
5 1P-1859 No. 24 0.07 in External
6 1P-1853 No. 21 0.04 in Internal
Right Angle Tips
7 1P-1864 No. 26-90 0.12 in External
8 1P-1862 No. 25-90 0.09 in Internal
9 1P-1858 No. 23-90 0.07 in Internal
10 1P-1856 No. 22-90 0.04 in External
11 1P-1860 No. 24-90 0.07 in External
12 1P-1854 No. 21-90 0.04 in Internal

1 Warranty: Caterpillar Standard Warranty, 6 Months

152
 Cat Pliers
External Pliers - 5P-5197
Warranty: Caterpillar Standard Warranty, 6 Months
• Use to compress or expand large retaining rings
• A double ratchet locks to hold the handles at any given point without hand
pressure
• Gap between the plier tips ranges from 12.7 mm (.50 in) fully closed to 76.0 mm
(3.00 in) fully open

Item Part Number Description

1 5P-5197 External Pliers
2 136-1452 Internal Pliers Assembly
3 and 4 1U-6728 Tip Set
Not Shown 6V-2062 Tip Set, 90 Degrees

Internal Retaining Ring Pliers - 1U-8758

Warranty: Caterpillar Standard Warranty, 6 Months
• Used to remove and install the large internal retaining rings in power shift
transmissions
• Double ratchet lock
• Pliers include 0.15 in (3.8 mm) diameter tips
• Service Part: 1U-8759 Replacement Tips (2 per package)

Part Number Description Length

1U-8758 Internal Retaining Ring Pliers 29.00 in (737.0 mm)

Pliers 444-6561
Warranty: Caterpillar six Months

• The hand-held pliers allow accurate assembly and disassembly operations

• The tips of the pliers precisely fit the gripping points on the clamp
• the integrated spring element keeps the pliers open, thus permitting comfortable
and fast working

153
Cat Pliers
External Retaining Ring Pliers - 2P-8312
Warranty: Lifetime
• Used to remove and install tempered steel retaining rings used in many
applications
• Right angle tips to provide the necessary clearance where the lock ring is acces-
sible only from a perpendicular position

Part Number Description

2P-8312 External Retaining Ring Pliers

154
 Hammers and Slide Sledges
Slide Sledge® Heavy Equipment Hammers
Warranty: Manufacturer, 1 Year
• Safe, easy operation by one person to execute specific jobs
with greater accuracy than two people with a hammer and
chisel
• Varied sizes and weights available for greater force or
accessibility

Part Number Weight Length Description

272-1208 9.00 lb 30.00 in Slide Sledge w/ 2 in diameter pin driver (272-1237)
272-1212 13.00 lb 46.00 in Slide Sledge w/ 2 in diameter pin driver (272-1237)
272-1215 14.00 lb 30.00 in Slide Sledge w/ 2 in diameter pin driver (272-1237)
272-1218 21.00 lb 46.00 in Slide Sledge w/ 2 in diameter pin driver (272-1237)

Slide Sledge Tips

Warranty: Manufacturer, 90 Day
• Various tips for the Slide Sledge Heavy Equipment Hammer to adapt it to various applications

Picture
Part Number Description Use Number
272-1228 Pin Driver, 1/2 in diameter Recommended for pins and bolts 1/2 in - 7/8 in diameter 1
272-1230 Pin Driver, 7/8 in diameter Recommended for pins and bolts 7/8 in - 1-1/4 in diameter 2
272-1233 Pin Driver, 1 1/4 in diameter Recommended for pins and bolts 1 1/4 in - 2 in diameter 3
272-1237 Pin Driver, 2 in diameter Recommended for pins and bolts 2 in - 2 1/2 in diameter 4
272-1239 Pin Driver, 2 1/2 in diameter Recommended for pins and bolts 2 1/2 in - 3 in diameter 5
272-1240 Pin Driver, 3 in diameter Recommended for pins and bolts 3 in - 4 in diameter 6
272-1224 Tie Rod/Ball Joint Separator Fork, Used to separate tie rod ends and ball joints 7
11/16 in
272-1225 Tie Rod/Ball Joint Separator Fork, Used to separate tie rod ends and ball joints 7
15/16 in
272-1227 Tie Rod/Ball Joint Separator Fork, 1- Used to separate tie rod ends and ball joints 7
7/16 in

155
Hammers and Slide Sledges
Slide Sledge Tips (Cont'd.)
Picture
Part Number Description Use Number
272-1223 Tie Rod/Ball Joint Splitter Adapter Attach all Slide Sledge separator fork and most common forks available 8
272-1222 Tie Rod/Ball Joint Separator 3 Tip Includes a Slide Sledge separator adapter and 11/16 in, 15/16 in and 1-1/8 in forks 9
Set
272-1242 Ripper Tooth Pin Inserter, 3/4 in Use on pins as small as 3/4 in up to 1 in with minimum tooth spacing of 4 1/2 in 10
diameter
272-1244 Ripper Tooth Pin Inserter, 1/2 in Use on pins as small as 1/2 in up to 3/4 in with minimum tooth spacing of 3 1/2 in 10
diameter
272-1247 Ripper Tooth Pin Inserter, 3/8 in Use on pins as small as 3/8 in up to 1/2 in with minimum tooth spacing of 2 3/4 in 10
diameter
272-1243 Ripper Tooth Pin Remover, 3/4 in Use on pins as small as 3/4 in up to 1 in with minimum tooth spacing of 4 1/2 in 11
diameter
272-1245 Ripper Tooth Remover, 1/2 in Use on pins as small as 1/2 in up to 3/4 in with minimum tooth spacing of 3 1/2 in 11
diameter
272-1246 Ripper Tooth Pin Remover, 3/8 in Use on pins as small as 3/8 in up to 1/2 in with minimum tooth spacing of 2 3/4 in 11
diameter
272-1241 Curved Chisel Tip, 1 3/8 in For chopping away hardened debris and shearing metal bolts, pins, and rivets up to 12
3/8 in, grade 8
272-1251 Scarifier Tooth Tip Removes scarifier teeth on most motor graders. The fork design allows the techni- 13
cian to split the trenching arm where the scarifier tooth is forced to fit.
272-1252 Utility Wedge Tip All-purpose impact tool designed to separate parts and straighten steel with maxi- 14
mum force.
272-1249 Race/Bearing/Seal Adapter Adapter driver tip to install races, bearings, and seals. Add drive plates to the end in 15
various combinations. Fits plates with a common 9/16 in center hole, up to 3/4 in high
(plates not included)
272-1250 Bushing Driver Adapter Adapter driver tip to properly install bushings easily and quickly. Fits drivers with a 16
common 3/4 in center hole, up to 7/8 in high (drivers not included)
272-1248 Bushing/Bearing/Seal Plate Driver Adapter driver to install bearings, bushings, and seals. Fits drivers or plates with a 1/ 17
Adapter 4 in center hole. (drivers and plates not included)
287-2075 Small Tire Bead Breaker, 2 1/4 in Most standard applications 18
head width
287-2076 Large Tire Bead Breaker, 2 7/8 in Ideal for tractor trailers, backhoes, motor graders, and other large equipment 19
head width

Slide Sledge Accessories

Warranty: Manufacturer, 90 Day

Picture
Part Number Description Use Number
272-1253 5 Pound Handle Weight Increases the Slide Sledge striking force by 5 lbs; works with any of the four tools by 1
threading onto tool handle
273-3527 Heavy Nylon Tool Bag 38 in long; For use with the shorter Slide Sledges (272-1208 & 272-1215) 2

156
 Hammers and Slide Sledges
Slide Sledge Accessories (Cont'd.)
Picture
Part Number Description Use Number
273-3528 Heavy Nylon Tool Bag 52 in long; For use with the longer Slide Sledges (272-1212 & 272-1218) 3
331-1264 Display Case for Slide Sledge – –
Tools (Dealer Use)

Slide Sledge Hammer Repair Parts

Warranty: Manufacturer, 90 Day
• Various individual repair parts for the Slide Sledge Heavy Equipment Hammer
• Most repair parts are specific to certain sized Slide Sledges (specified in table below)

Picture
Part Number Description Use Number
312-0985 Drive Bar Internal drive bar replacement for the 272-1212 Slide Sledge 1
312-0988 Drive Bar Internal drive bar replacement for the 272-1218 Slide Sledge 1
312-0999 Drive Bar Tube External main body of 272-1208 Slide Sledge 2
312-1002 Drive Bar Tube External main body of 272-1215 Slide Sledge 2
312-0992 Hand Guard Connection point of body and handle for 272-1208 & 272-1212 Slide Sledge 3
312-0996 Slide Lock Pin Pin for locking the handle on all sized Slide Sledges 4
312-1012 Hand Stop Rubber piece fitting over drive bar as cushion for operator's hand for 5
272-1208 & 272-1212 Slide Sledge
312-1014 Hand Stop Rubber piece fitting over drive bar as cushion for operator's hand for 5
272-1215 & 272-1218 Slide Sledge
312-1009 Plunger Plunger on end of Drive Bar where tips are secured for 272-1208 & 272-1212 6
312-1010 Plunger Plunger on end of Drive Bar where tips are secured for 272-1215 & 272-1218 6
312-7677 Plunger Parts Kit Housing and spring that go around the Plunger for 272-1208 & 272-1212 7
312-7678 Plunger Parts Kit Housing and spring that go around the Plunger for 272-1215 & 272-1218 7

Hammers
Warranty: Lifetime unless otherwise noted

157
Hammers and Slide Sledges
Hammers (Cont'd.)
Item Part Number Size Height Length Weight Material
Ball Peen Hammers
1 1S-0257 1 1/8 in – 298.5 mm (11.75 in) 340 g (12 oz) –
2 1B-7810 1 5/32 in 113.5 mm (4.47 in) 406.4 mm (16 in) 680 g ( 1 1/2 lb) –
3 8H-8577 1 1/4 in 128.6 mm (5.06 in) 406.4 mm (16 in) 900 g (2 lb) –
– 386-3351 1 7/8 in 76 mm (3 in) 362 mm (14.25 in) 454 g (1.0 lb) –
– 386-3363 7/8 in 64 mm (2.5 in) 311 mm (12.25 in) 227 g (0.5 lb) –
Soft Face Hammers
4 1S-0258 1 11/16 in 117.5 mm (4.63 in) 330.2 mm (13 in) 900 g (2 lb) –
Replacement Tips for 1S-0258(1)
5 3S-0460 – – – – Medium tip
6 3S-0459 – – – – Hard tip
Hammer Handles(2)
– 263-3817 305 mm (12 in) – – – Hickory
– 263-3819 407 mm (16 in)(2) – – – Hickory
– 263-3820 458 mm (18 in) – – – Hickory

Multiple Use Hammers

Warranty: Lifetime unless otherwise noted

Face
Item Part Number Description Diameter Overall Length Weight Size Material
1 223-1697 Double Face Sledge 47.8 889 mm (35 in) 4.4 kg (9.61 lb) –
2 223-1694 Dead Blow Sledge(1) 69.8 508 mm (20 in) 2.5 kg (5.51 lb) – –
3 223-1693 Hand Drilling (Short Handle)(1) 38.1 273 mm (10.75 in) 1.8 kg (4.01 lb) –
– 223-1695 Dead Blow Sledge 82.6 914.4 mm (36 in) 5.4 kg (12.02 lb) – –
– 223-1698 Double Face Sledge 54 905 mm (35.63 in) 5 kg (10.91 lb) –
– 245-9823 Double Face Sledge(3) 73 914 mm (35.98 in) 7.2 kg (15.98 lb) –
Hammer Handles
– 263-3821 – – – – 762 mm Hickory
(30 in)(3)
– 263-3822 – – – – 915 mm (36.02 Hickory
in)(3)

1 Warranty: Six Months

2 Warranty: Manufacturer: 120 Day
3 Warranty: Manufacturer, 120 Day

158
 Hammers and Slide Sledges
Handled Tooth Pin Removers
Warranty: Caterpillar Standard Warranty, 6 Months
• Removes and installs bucket teeth retaining pins
• Small enough to store in toolbox
• Quicker, safer, and easier than a conventional punch

Part Number Use

196-1168 Replacement Handle for 196-1331 and 203-4290
196-1331 J350, J400, J450, and J460 GET Tips
203-4290 J550 GET tip

Handheld Tooth Pin Removers

Warranty: Caterpillar Standard Warranty, 6 Months
• Removes and installs solid or flex pins from bucket teeth
• Small enough to store in toolbox
• Quicker, safer, and easier than a conventional punch

Part Number Use

143-2459 J200 and J225 GET Tips
143-2460 J250, J300, and J350 GET Tips
207-0631 23 Series Teeth and Diagonal Retention System (DRS)

159
Chisels and Punches
Pin Punch Set, 7 Piece - 226-1900
Warranty: Caterpillar Standard Warranty, 6 Months
• Replaces discontinued 1U-7250 Pin Punch Set, 7 Piece
• Individually heat treated for uniform hardness
• Includes pouch

Part Number Point Size Length Description

226-1900 – – Pin Punch Set
Pin Punch Set Consists of:
226-1901 1/16 in 102 mm (4.0 in) Drive Pin Punch (3/32 in)
226-1902 3/32 in 114 mm (4.5 in) Punch
226-1903 1/8 in 121 mm (4.75 in) Punch
226-1904 5/32 in 152 mm (6 in) Punch
226-1905 3/16 in 127 mm (5 in) Punch
226-1906 7/32 in 146 mm (5.75 in) Punch
226-1907 1/4 in 146 mm (5.75 in) Punch

Drift Punch Set, 5 Piece - 227-3129

Warranty: Caterpillar Standard Warranty, 6 Months
• Replaces discontinued 1U-7260 Drift Punch Set, 5 Piece
• Material: high carbon steel
• Individually heat treated for uniform hardness
• Includes pouch

Part Number Point Size Length Description

227-3129 – – Drift Punch Set
Drift Punch Set Consists of:
227-3130 1/8 in 203 mm (8 in) Punch
227-3131 3/16 in 254 mm (10 in) Punch
227-3132 7/32 in 305 mm (12.0 in) Punch
227-3133 1/4 in 305 mm (12.0 in) Punch
227-3134 5/16 in 305 mm (12.0 in) Punch

160
 Chisels and Punches
Chisel Group, 5 Piece - 227-3795
Warranty: Caterpillar Standard Warranty, 6 Months
• Individually heat-treated for uniform hardness
• Resharpened and polished after blasting for a sharper cutting edge
• Includes pouch

Part Number Punch Size Length Description

227-3795 – – Chisel Group
Chisel Group Consists of:
227-3796 5/16 in 127 mm (5 in) Chisel
227-3797 3/8 in 140 mm (5.5 in) Chisel
227-3798 7/16 in 152 mm (6 in) Chisel
227-3799 1/2 in 152 mm (6 in) Chisel
227-3800 5/8 in 165 mm (6.5 in) Chisel

Individual Chisels and Punch Pieces

Warranty: Lifetime unless otherwise noted
• Hot-formed from fine alloy steel and heat treated for maximum hardness — they
hold their edges and points

Item Part Number Punch Size Length Type

– 165-3977 4.95 mm (1) 154 mm (6.06 in) Radius Punch
– 452-9936 13/32 in 139.7 mm (5.50 in) Cold Chisel
– 1U-7296 3/16 in (1) 158.8 mm (6.25 in) Center Punch
– 452-9937 5/32 in 203.2 mm (8.00 in) Punch
– 8T-0832 1/4 in 142.7 mm (5.63 in) Cape Chisel
1 8H-8578 3/8 in 241.3 mm (9.50 in) Punch
2 452-9933 3/4 in 177.8 mm (7.00 in) Cold Chisel
3 452-9934 3/16 in 152.4 mm (6.00 in) Center Punch

1 Warranty: Six Months

161
Pry Bars
Pry Bars
Warranty: Caterpillar Standard Warranty, 6 Months
Part Number Description Size
194-3553 Rolling Head Pry Bar 304.8 mm (12.00 in)
194-3556 Rolling Head Pry Bar 533.4 mm (21.00 in)
1U-7587 Pry Bar, 6 in long (1) 152.4 mm (6.00 in)
1U-7591 Pry Bar 457.2 mm (18.00 in)
1U-7592 Pry Bar 609.6 mm (24.00 in)
1U-7593 Pry Bar 762.0 mm (30.00 in)
4C-5647 Long Pry Bar 1371.6 mm (54.00 in)
4C-5742 Pry Bar 1168.4 mm (46.00 in)
5F-4764 Rolling Head Pry Bar, 40.64 cm (16 in) 406.4 mm (16.00 in)
386-3305 Extra long (6 ft) pry bar 1842 mm (72.5 in)
(Fiberglass and Iron)

Bead Braker Bar - 4F-5166

Warranty: Caterpillar Standard Warranty, 6 Months
• Used to break frozen or rusted beads
• Lightweight and portable
• 30 inches (762 mm)
• 7/8 inch stock

Part Number Description

4F-5166 Bead Braker Bar

Pry Bar Display - 244-0910

Warranty: Caterpillar Standard Warranty, 6 Months
• Eye-catching addition to the sales floor area
• Sturdy display measures only 406.4 mm x 457.2 mm (16 in x 18 in) at the base but
it's 1625.6 mm (64 in) high for extra visual impact
• Display holds two 1U-7593, two 4C-5742, and one 4C-5647 pry bars.
• Pry bars purchased separately

Part Number Description Size

244-0910 Pry Bar Display 406.4 mm x 457.2 mm (16 in x 18 in) at
the base; 1625.6 mm (64 in) high

1 Warranty: Lifetime

162
 Pry Bars
Handled Pry Bars
Warranty: Caterpillar Standard Warranty, 6 Months
• Black chrome striking cap—hit bar without damage to handle
• Available in bar shank lengths of 30, 46, 61, and 91 cm (12, 18, 24, and 36 in)
• Ergonomic handle made from a dual durometer composite for user comfort; re-
duces hand fatigue
• Polished tip with black oxide finish
• Long-life finish resists rust and wear during use

Part Number Description Size

239-4140 Handled Pry Bar Kit includes: 239-4141, 239-4142, and –
239-4143
239-4141 Handled Pry Bar 12 inch Handled Pry Bar, 30 cm (12 in)
239-4142 Handled Pry Bar 18 inch Handled Pry Bar, 46 cm (18 in)
239-4143 Handled Pry Bar 24 inch Handled Pry Bar, 61 cm (24 in)
239-4255 Handled Pry Bar 36 inch Handled Pry Bar, 91 cm (36 in)

Handled Pry Bar - 160-5119

Warranty: Caterpillar Standard Warranty, 6 Months
• 12" handled pry bar
• Blade extends through handle to deliver hammering force to the blade tip
• A metal end cap prevents damage to the handle
• Heated treated and precision forged steel
• Square blade
• 5/8" wide tip

Part Number Description

160-5119 Handled Pry Bar

163
Miscellaneous Hand Tools — Knives, Saws and Cutting Tools
3-inch Stainless Steel Lockback - 429-0608
Warranty: Caterpillar Lifetime Warranty
• 1 7/8-inch (4.76 cm) blade
• 420 high carbon stainless steel
• Nail mark
• Polished stainless steel handle
• Lockback
• Cat branded
• Made in the USA
Specifications
Overall Length 1.8 oz (51g)
Overall Length 5 1/4- inch (13 cm)

Part Number Description

429-0608 3-inch Stainless Steel Lockback

5-inch Textured Stainless Steel Lockback - 429-0610

Warranty: Caterpillar Lifetime Warranty
• 3 1/4-inch (8.2 cm) blade
• 420 high carbon stainless steel
• Half-serrated
• Nail mark
• Textured stainless steel handle
• Brass rivets
• Lockback
• Cat branded
• Leather-accented pouch
• Made in USA
Specifications
Weight 6.7 oz (190 g)
Overall Length 8-3/4 inch (22.2 cm)

Part Number Description

429-0610 5-inch Textured Stainless Steel Lockback

164
 Miscellaneous Hand Tools — Knives, Saws and Cutting Tools
5-inch Heavy-Duty Wood and Brass Lockback - 429-0611
Warranty: Caterpillar Lifetime Warranty
• 3 1/4-inch (8.2 cm) blade
• 420 high carbon stainless steel
• Nail mark
• Wood handle with brass bolsters
• Lockback
• Cat branded
• Leather pouch
• Made in USA
Specifications
Weight 6.1 oz (173g)
Overall Length 8-½ inch (21.5 cm)

Part Number Description

429-0611 5-inch Heavy-Duty Wood and Brass Lockback

5-inch Wood Inset Liner Lock - 429-0612

Warranty: Caterpillar Lifetime Warranty
• 3 1/4-inch (8.2 cm) blade
• Titanium carbo-nitrate coated 420 Stainless Steel
• Thumb stud for easy opening
• Steel handle with inset wood
• Liner lock
• Belt clip
• Lanyard mount
• Cat branded
• Made in USA
Specifications
Weight 6.2 oz (175.7 g)
Overall Length 7 ¾ inch (19.6 cm)

Part Number Description

429-0612 5-inch Wood Inset Liner Lock

165
Miscellaneous Hand Tools — Knives, Saws and Cutting Tools
5-inch G10 Liner Lock - 429-0613 and 429-0614
Warranty: Caterpillar Lifetime Warranty
• 3 1/4-inch (8.2 cm) blade
• Titanium carbo nitrate coated 420 Stainless Steel
• Thumb stud for easy opening
• Steel handle with inset wood
• Liner lock
• Belt clip
• Lanyard mount
• Cat branded
• Made in USA

Specifications
Weight 6.2 oz (175.7g)
Overall Length 7-3/4 inch (19.6 cm)

Part Number Description

429-0613 5-inch G10 Liner Lock with Thumbstud
429-0614 5-inch G10 Liner Lock with Nailmark

17-Function Multi-tool - 429-0609

Warranty: Caterpillar Lifetime Warranty
• 3 1/4 (8.2cm) blade
• File – fine/course
• Saw
• Serrated rope blade
• Can opener
• Bottle cap opener
• Blunt nose pliers/grippers/cutters
• English/metric ruler
• Philips bit – small, large
• Slotted bit – small, large
• 1/4-inch drive socket adapter
• 420 high carbon stainless steel
• Nail mark
• L-channel lock holds all blades in place
• Cat branded
• Leather-accented pouch
• Made in USA

166
 Miscellaneous Hand Tools — Knives, Saws and Cutting Tools
17-Function Multi-tool - 429-0609 (Cont'd.)
Specifications
Weight 9.1 oz (258g)
Overall Length 5 ¾-inch (14.6 cm)

Part Number Description

429-0609 17-Function Multi-tool

3 3/4-inch Two-Blade Electricians Knife - 429-0615

Warranty: Caterpillar Lifetime Warranty
• 2 1/2-inch 420 high carbon stainless steel spear blade
• 2 3/8-inch 1095 carbon steel screwdriver/insulation cutter/wirescraper blade
• Delrin handle
• Nail mark
• Shackle
• Made in the USA

Specifications
Weight 4.1 oz (116 g)
Overall Length 6-1/2 inch (16.5 cm)

Part Number Description

429-0615 3 3/4-inch Two-Blade Electricians Knife

Utility Knife - 429-0616

Warranty: Caterpillar Lifetime Warranty
• Folding razor blade
• Safety-locking blade
• Quick change blade
• Uses standard two-notch replacement blades
• Nail mark
• Belt clip
• Cat branded

Part Number Description Size Quantity

429-0616 Utility Knife — 1
4C-4871 Utility Knife Blades .635 mm (0.025 in) 100 blades per box

167
Miscellaneous Hand Tools — Knives, Saws and Cutting Tools
Utility Knife Blades
Warranty: Caterpillar Standard Warranty, 6 Months
• 0.635 mm (0.025 in)
Part Number Description Qty.
4C-4871 Utility Knife Blades 100 blades per box

Single Edge Razor Blades

• Industrial quality
• Ideal for scraping paint and glass, cutting, and trimming
• Fits all standard razor blade tools
• Gauge: 0.009

Part Number Qty.

264-4353 100 per carton

Hacksaws
Warranty: Lifetime unless otherwise noted

Part
Number Description Length Use Teeth Material Qty.
194-3552 Hacksaw 350.0 mm (13.78 in) for use with 12 inch blade; blade – – –
tensioning device in handle
208-6183 Hacksaw 419.1 mm (16.50 in) for use with 12 inch blade – – –
Replacement Hacksaw Blade Sets
1U-9234 Replacement Hacksaw Blade 305.0 mm (12 in) – 457 mm (18 in) Bi-Metal 5
Sets
1U-9236 Replacement Hacksaw Blade 305.0 mm (12 in) – 610 mm (24 in) Bi-Metal 10
Sets
1U-9238 Replacement Hacksaw Blade 305.0 mm (12 in) – 813 mm (32 in) Bi-Metal 5
Sets

168
 Miscellaneous Hand Tools — Knives, Saws and Cutting Tools
File Set, 8 piece
Warranty: Manufacturer, 120 Day
• Files meet Federal Specification #GGG-F-325B
• Manufactured under ISO 9002 Certification
• Files and wood file handles can be ordered separately
• Material: high carbon steel

Part Number Description

264-0414 8 piece File Set
264-0414 consists of
263-9067 Aluminum File, 254 mm (10 in)
263-9069 Half Round Bastard File, 254 mm (10 in)
263-9070 Mill Bastard File, 203.2 mm (8 in)
263-9071 Round File, 4.8 mm (3/16) diameter x 203.2 mm (8 in) long
263-9072 Slim Taper File, 152.4 mm (6 in)
263-9074 Mill Bastard File, 152.4 mm (6 in)
263-9075 Wood File Handle for file lengths between
152.4 mm (6 in) to 203.2 mm (8 in)
263-9076 Wood File Handle for file lengths between
203.2 mm (8 in) to 254 mm (10 in)

Filter Cutter - 175-7546

Warranty: Caterpillar Standard Warranty, 6 Months
• Used to cut open spin-on filters to inspect filter media for contaminants, a common practice when diagnosing po-
tential machine problems and internal contaminants.
• Aluminum frame construction
• Designed to cut all types of filters, including aircraft-style filters, without repositioning cutting wheels
• Heavy-duty double roller and cutting wheel design eliminates binding of filters
• All wear parts are heat-treated steel for added durability
• Cutting wheels are ground with a double-taper edge for easier cutting

Item Part Number Description Required

– 175-7546 Oil Filter Cutter Group –
Replacement Parts
1 177-0364 Roller 2
2 177-0365 Cutting Wheel 2
3 177-0367 Pin 4
Not shown 177-0366 Spacer 2

169
Miscellaneous Hand Tools — Knives, Saws and Cutting Tools
Quick Release Tubing Cutters
Warranty: Lifetime except part 4C-6979
• Offer the best tracking and easiest cutting available anywhere
• Cut copper, aluminum and steel tubing (not steel pipe)
• With a quick wheel change, they also cut a wide variety of plastic pipe and
tubing

Part Wheel for Copper, Wheel for

Item Number O.D. Capacity Length Weight Aluminum, Brass, Steel Stainless Steel
1 4C-6977 3.0 mm - 33.0 mm (.13 in - 1.31 in) 152 mm (5.98 in) 0.2 kg (0.44 lb) 4C-6980 4C-6981
2 4C-6978 6.0 mm - 60.0 mm (.25 in - 2.63 in) 203 mm (7.99 in) 0.5 kg (1.10 lb) 4C-6980 4C-6981
3 4C-6979 10.0 mm - 90.0 mm (.38 in - 3.50 in)(1) 279 mm (10.98 in) 1.1 kg (2.43 lb) 4C-6982 —

1 Warranty: Six Months

170
 Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges
Universal Level - 9U-7329
Warranty: Caterpillar Standard Warranty, 6 Months
• Made of high-impact ABS
• Has two easy-to-read Plexiglas vials, one a vertical angle dial adjustable from 0°
to 180°

Part Number Description

9U-7329 Universal Level

Protractor - 441-3703
Warranty: Caterpillar Standard Warranty, 6 months
• Quickly find angles
• Determine miter angle layout
• Measure and transfer inside/outside sloped angles
• 6 inches (15 cm) long
• High-strength plastic with brass hardware

Part Number Description

441-3703 Protractor

Tape Measures
Warranty: Caterpillar Standard Warranty, 6 Months
5P-3277, 1U-9366, 1U-9367, and 1U-9368
• 2-color
• Handsome, chrome-finished case
• Removable belt clip
• Auto retract
• Tape lock lever
232-5041
• Ergonomically designed
• Magnetic tip holds tape in place and makes long distance measuring much
easier
• Yellow and black plastic
• Auto retract
• Tape lock lever

Part Locking
Number Blade Width Blade Length English Graduations Metric Graduations Feature
1U-9366 19.0 mm (3/4 in) 16 ft (5 m) 1 in, 1/16 in 1.0 cm, 1.0 mm Yes
1U-9367 25.4 mm (1 in) 26 ft (8 m) 1 in, 1/16 in 1.0 cm, 1.0 mm Yes
1U-9368 25.4 mm (1 in) 30 ft (9 m) 1 ft, 1 in, 1/16 in – Yes

171
Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges
Tape Measures (Cont'd.)
Part Locking
Number Blade Width Blade Length English Graduations Metric Graduations Feature
232-5041 25.4 mm (1 in) 26 ft (8 m) 1 ft, 1 in, 1/16 in 1.0 cm, 1.0 mm Yes
5P-3277 12.7 mm (1/2 in) 10 ft (3 m) 1 in, 1/10 in 1.0 cm, 1.0 mm Yes

Angle Finder and Level

Warranty: Caterpillar Standard Warranty, 6 months
• Quickly identifies angles without interference from cold, heat, or magnetic fields
• Demarked 0 to 90 degrees in five quadrants
• Ceramic magnetic base

Angle Finder and Level 437-4620

Tape Measures
Warranty: Caterpillar Standard Warranty, 6 Months
9U-7326 Tape Measure, 1/4 inch x 6 ft
• Black ABS-encased steel tape
• Slim and contemporary—fits easily in your pocket
• Has auto stop and return
• Readings in mm and inches
9U-7327 Tape Measure, 1/2 inch x 10 ft
• Can read dimensions directly on the tape by looking in a see-through window
• Great for inside measurements such as window dimensions
• Readings in mm and inches

Part Number Description Size

9U-7326 Pocket Tape 1/4 in x 6 ft
9U-7327 Tape Measure 1/2 in x 10 ft

172
 Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges
Steel Tape Measure
Warranty: Caterpillar Standard Warranty, 6 Months
• Heavy-duty vinyl covered welded steel case
• Yellow coated 3/8 inch wide blade, 2-color markings, folded steel hook, folding
handle
• Graduation — inches in black, feet and 16 inch centers in red; meters in black,
centimeters and millimeters in red
• English on one side, metric on the other side

Part Number Blade Width Blade Length English Graduations Metric Graduations
1U-9369 3/8 in 50 1 ft 1 in, 1/16 in 1.0 m, 1.0 cm, 1.0 mm

1000 mm Straight Edge - 386-3364

Warranty: Caterpillar Standard Warranty, Six months

• 1000 mm dual scale: ½ mm and 1 mm increments

• 40 inch dual scale: 1/32 and 1/64
• Graduation type 36
• Satin chrome finish with black markings

Part Number 386-3364

Taper Gauge - 4C-8733

Warranty: Caterpillar Standard Warranty, 6 Months
• Used to quickly and conveniently measure openings for shim packs or spacers
• Used in place of thickness gauges
• Made of quality tool steel
• One side graduated in inches, other side in millimeters

Part Number Description Size

4C-8733 Taper Gauge 6.20 in x .40 in (160.0 mm x 11.0 mm)

173
Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges
Block Magnet - 4C-9798
Warranty: Caterpillar Standard Warranty, 6 Months
• Measures or checks for straight line dimensions on any large, steel structure us-
ing magnet restrained string lines
• Fast, economical means of simplifying inspection of large steel structures for
alignment, position, parallelism, dimensional accuracy
• Strong enough to hold a tight string over a steel structure
• Magnets can be stacked to obtain string clearance with structure features
• String not included

Part Number Description Size Weight

4C-9798 Block Magnet 25.0 mm x 25.0 mm x 50.0 mm (1.00 in x 1.00 in x 2.00 in) 0.166 kg (0.366 lbs)

O-Ring Measuring Cone - 9U-5155

Warranty: Manufacturer, 30 Day
Find the correct O-ring replacement faster and easier.
• Designed to measure SAE industry standard O-ring dimensions (cross section
and dash size). These dimensions are published by the Society of Automotive En-
gineers (SAE).
• 457.2 mm (18 in) tall, cone shaped
• Material: high-impact, yellow plastic
• Round base with five industry standard O-ring cross section diameters (widths)
cut into the edge
• Cone has 65 steps indicating varying inside diameters

Part Number Description

9U-5155 O-Ring Measuring Cone

Check-A-Thread
Warranty: Caterpillar Standard Warranty, 6 months
• Quickly identify the most common size nuts and bolts
• Female threaded holes to identify common bolt sizes
• Male threaded studs to identify nut sizes.
• Mounts to the wall or sits on its built in stand
Measure Check-A-Thread Part Number
Inch 250-6865
Metric 250-6866

174
 Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges
Feeler Gauges
Warranty: Lifetime
Part Number Description Size
1U-7234 Feeler Gauge (1) 25 Blade, .0015 in - .040 in
386-3236 Feeler Stock Assortment 32 Blade, .0005 in - .030 in
8H-8581 Feeler Gauge 25 Blade, .0015 in - .025 in

Dual Scale Feeler Gauge Set, 13 Blade - 383-8887

Warranty: Caterpillar Lifetime
• Stamped with both Metric and English sizes
• English sizes: 0.001, 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.010,
0.012, 0.013, 0.015 inch
• Metric sizes: 0.0254, 0.0381, 0.0508, 0.0762, 0.1016, 0.127, 0.1524, 0.1778, 0.2032,
0.254, 0.3048, 0.3302, 0.0381 mm

Part Number Description

383-8887 Dual Scale Feeler Gauge Set

Plastic Gauges for Checking Clearance

SMCS Code: 1000-082, 0700, 0701, 0714
Models: All Engines or Clearance Between Any Mating Parts
Warranty: Caterpillar Standard Warranty, 6 Months
• Used to quickly and easily check clearance between mating parts (main rod and
bearing clearance, component side clearance, oil pump cover to gear clearance,
etc.)
• Plastigage clearance indicator is an extruded plastic thread that crushes when
clamped between two mating parts
• Available in four color-coded sizes for easy identification
• Clearance thickness is determined by holding crushed indicator material against
paper packaging (refer to illustration)
• Any plastic residue on parts can be quickly removed with component cleaner
• One indicator per package
• Overall length: 30.0 cm (12.00 in)

Part Number Color Clearance Range

198-9142 Green 0.025 to 0.076 mm (.001 to .003 in)
198-9143 Red 0.051 to 0.152 mm (.002 to .006 in)
198-9144 Blue 0.102 to 0.229 mm (.004 to .009 in)
198-9145 Yellow 0.230 to 0.510 mm (.009 to .020 in)

1 Warranty: Six Months

175
Miscellaneous Hand Tools — Levels, Measuring Tools and Gauges
Hardness Tester - 6V-6035
Warranty: Caterpillar Standard Warranty, 6 Months
• Check crankshaft journal hardness
• Hardened steel ball strikes tested surface without damage
• 15 to 65 Rockwell C Scale
• Height of bounce read as Shore scleroscope reading
Reference
SEBF8041 Guideline for Reusable Parts

Part Number Description

6V-6035 Hardness Tester

Thread Pitch Gauges

Warranty: Caterpillar Standard Warranty, 6 Months
• Quickly measure the pitch or lead of a bolt thread

Part Number Description Size

386-3235 Metric 18 Leaves, 0.4 mm - 7.0 mm
386-3237 English 30 Leaves, 4 - 42 TPI (Threads Per Inch)

176
 Miscellaneous Hand Tools — Seal Picks
Seal Pick - 5P-1720
Warranty: Caterpillar Standard Warranty, 6 Months
• Used to remove and install all types of oil seals
• One end of pick is pointed for prying out flexible seals
• Blunt, hook end is used to align seals for installation and to eliminate the twist
that occurs when installing O-ring or quad-ring seals
• Both ends of the pick are hardened and provide much greater strength than
would normally be expected from a tool this size

Part Number Description

5P-1720 Seal Pick

Seal Pick Kit - 5P-7414

Warranty: Lifetime
Part Number Description
5P-7414 Seal Pick Kit

Seal Pick - 195-4609

Model: All Hydraulic Cylinders
Warranty: Lifetime
• Used to remove cylinder rod seals
• Large size allows faster and easier removal of seals from large hydraulic
cylinders
• Heavy-duty design

Part Number Description Length

195-4609 Seal Pick 262 mm (10 in)

177
Miscellaneous Hand Tools — Brushes
Scratch Brushes
Warranty: Caterpillar Standard Warranty, 6 Months
• Hand scratch brushes are excellent for removing rust, scale, old paint, chips and
dirt, and for cleaning castings and metal parts
• Provide long, effective service at extremely low cost

Part Number Description Size

1U-9915 Curved Handle Brush .014 in (3 x 19 Row)
1U-9916 Curved Handle Brush .012 in (4 x 19 Row)
1U-9917 Shoe Handle Brush .014 in (4 x 16 Row)
1U-9918 Inspection Stainless Brush .006 in (3 x 7 Row)

Corner Cleaner Wire Brush - 160-0774

Warranty: Caterpillar Standard Warranty, 6 Months
• Quickly removes flaking paint, rust, and scale
• Handy small size with pointed end works well in hard to reach areas
• Full size handle with finger grips and thumb rest provides added control and
comfort
• Made of tough polypropylene

Part Number Description Overall Length

160-0774 Corner Cleaner Wire Brush 254.0 mm (10.00 in)

Longneck Wire Brush - 160-0772

Warranty: Caterpillar Standard Warranty, 6 Months
• Excellent for removing rust, scale, old paint, chips, or dirt
• Unique wrap-around handle protects your fingers
• Full size handle and molded finger grips add control and reduce fatigue
• Over 80 yards of wire for maximum performance
• Made of tough polypropylene
• Heavy-duty steel scraper has a baked-on, rust resistant finish
• Scraper is permanently secured to brush

Part
Number Description Width Overall Length
160-0772 Longneck Wire Brush 76.2 mm (3.00 in) 330.2 mm (13.00 in)

178
 Miscellaneous Hand Tools — Brushes
Industrial Wire Scrubber - 160-0775
Warranty: Caterpillar Standard Warranty, 6 Months
• Quickly removes flaking paint, rust, and scale
• Dual grip design reduces fatigue — grasp either the handle or specially molded
block
• Made of tough polypropylene

Part Number Description Overall Length

160-0775 Industrial Wire Scrubber 177.8 mm (7.00 in)

Parts Cleaning Brushes

Warranty: Caterpillar Standard Warranty, 6 Months
Part
Item Number Description Wire Size Wire Row
1 1U-9920 11 in O.A.L. Size #10 Black Polypropylene
2 1U-9919 11 in O.A.L. Size #10 Tampico
3 2B-4317 10 3/4 in O.A.L. Paint Style 1 1/2 in Black Nylon

Paint Brushes
Warranty: Manufacturer, 120 Day
• Use with interior or exterior paints, stains, varnishes, and urethanes
• Quantity: one box of 12 brushes
• 262-9752 not available in Australia, New Zealand, Republic of Fiji or Papua New
Guinea
Part Number Width x Length Material
262-9749 25 mm x 178 mm (1 in x 7 in) Nylon Brush, Metal Ferrule, Plastic Handle
262-9750 51 mm x 203 mm (2 in x 8 in) Nylon Brush, Metal Ferrule, Plastic Handle
262-9752 76 mm x 203 mm (3 in x 8 in) Hog Bristle Brush, Metal Ferrule, Wood Handle

Acid Brushes
Warranty: Caterpillar Standard Warranty, 6 Months
• Genuine horsehair bristles, crimped with flat tin handle
• Chemical resistant handle

Part Number Description Size

1U-9977 Acid Brush 3/8 in
1U-9978 Acid Brush 1/2 in

179
Miscellaneous Hand Tools — Brushes
Battery Post Brush - 1U-9921
Warranty: Caterpillar Standard Warranty, 6 Months
• Stiff wire bristles thoroughly clean posts

Part Number Description

1U-9921 Battery Post Brush

180
 Miscellaneous Hand Tools — Miscellaneous
Rivet Sets
Warranty: Caterpillar Standard Warranty, 6 Months
• Available for either "Star" set rivets or "Roll" set rivets
• "Star" set rivets, identified by a star stamped in the head, should be used only
where the clinching is done against a non-metallic surface. To form a good
clinch, there should be approximately 3/16 inch of rivet extension before the rivet
is set.
• "Roll" set rivets, marked with a circle on the head, should be used when clinching
is done against metal. To form a good clinch, there should be approximately 1/8
inch of rivet extension before the rivet is set.

Item Part Number Description

– 6V-7013 Roll Set (for 5/32 in rivets)
1 1P-2874 Roll Set (for 1/4 in rivets)
2 6F-6947 Star Set
3 6F-6946 Roll Set (for 3/16 in rivets)

Riveter Kit - 129-1063

SMCS Code: 4054
Model: M312 Wheeled Excavators
Warranty: Lifetime
• Used for miscellaneous repairs requiring rivets
• Comes with three different nose pieces

Part Number Description Length

129-1063 Riveter Set 53.0 cm (21.0 in)

Shovels and Spades

Warranty: Manufacturer, Lifetime
• Ergonomically engineered for balance and safety
• Latest technology fiberglass handles
• Super-duty, pultruded core with reinforcement sections adds strength
• Molded-exterior, polymer clad jacket for handling comfort
Part
Item Number Description
1 157-2264 Shovel, Round Point with 122 cm (48 in) long handle
2 157-2276 Spade, Drain with 122 cm (48 in) long handle
3 157-2268 Shovel, Square with 122 cm (48 in) long handle
4 157-2273 Scoop, # 12 Aluminum
5 157-2278 Spade, Drain with 69 cm (27 in) D handle
6 157-2269 Shovel, Square Point with 69 cm (27 in) D handle
7 157-2266 Shovel, Round Point with 69 cm (27 in) D handle

181
Miscellaneous Hand Tools — Miscellaneous
Retrieval Tools
Warranty: Lifetime
Item Part Number Description
1 1U-7262 Magnet
2 146-2728 Flex Pickup Tool

Inspection Mirror
Warranty: Caterpillar Standard Warranty, 6 Months
• The mirror extends to 15 1/4 in long
• The mirror swivels 360 degrees

Part Number Description

9U-6182 Inspection Mirror

Scraper
Warranty: Caterpillar Standard Warranty, 6 Months
Part Number Description Size
8H-8580 Scraper 38.1 mm (1.50 in) wide

Filter and Plug Removal and Installation Tools

Warranty: Lifetime unless otherwise noted
• Used to remove and install drain and fill plugs
• Most hexagonal plugs can also be removed and installed using the 213-1985
Sliding T-Handle and 8H-8561 Socket

Item Part Number Description

1 1S-2475 Wrench, 3/4 in square (1)
2 8H-8559 Socket Extension
3 213-1985 Sliding T-Handle
4 212-8145 Drain Plug Socket (1)
5 212-8146 Drain Plug Socket, 1/2 in Female, 1 in and 1 1/2 in Hex (1)
6 185-3630 Filter Strap Wrench Assm. (1)

1 Warranty: Six Months

182
 Miscellaneous Hand Tools — Miscellaneous
Cab Glass Installation Tools
Warranty: Caterpillar Standard Warranty, 6 Months
• For installing the filler strips around the glass in cabs

Part Number Description

4C-9946 Filler Strip Tool Assembly
5H-4845 Seal Installation Tool Assembly

Superior E-Z Thrust Caulker

Warranty: Caterpillar Standard Warranty, 6 Months
• Holds any 12 oz. tube designed for use with a caulking gun
• Recommended for all grades of caulks, sealants and adhesives from heavy to
light consistencies

Part Number Description Cartridge Size

4C-6922 E-Z Thrust Caulker 0.01 gal

Super Ratchet-Type Caulker

Warranty: Caterpillar Standard Warranty, 6 Months
• Designed for the professionals who prefer ratchet guns
• Will outlast, outperform all other ratchet guns
• Engineered to withstand heavy use
• Equipped with ladder hook, built-in spout cutter, seal puncture tool, and conven-
ient "D" ring and wrist strap

Part Number Description Cartridge Size

4C-6923 Ratchet-Type Caulker 1/10 gal

BIM Saw Blades

Warranty: Manufacturer, 120 Day
Package
Part Number Length Teeth Quantity Teeth Specs
1U-9234 305.0 mm (12 in) 457 mm (18 in) 5 Raker BIM(2)
1U-9236 305.0 mm (12 in) 610 mm (24 in) 10 Wavy BIM
1U-9238 305.0 mm (12 in) 813 mm (32 in) 5 Wavy BIM

2 BIM – All purpose blade, highly flexible, for the most difficult materials

183
Miscellaneous Hand Tools — Miscellaneous
Bi-Metal All-Purpose Tiger Saw Blades
Warranty: Caterpillar Standard Warranty, 6 Months

Package
Part Number Length Teeth/Inch Quantity Recommended Use
4C-9942 152 mm (6 in), flexible 18 5 Heavy gauge (non-ferrous metals) — bar and angle stock-stainless-
galvanized pipe-tubing (over 18 ga.)
4C-9943 152 mm (6 in), flexible 14 5 Heavy gauge (non-ferrous metals) — bar and angle stock-cast alumi-
num-copper-brass-galvanized
4C-9944 229 mm (9 in) 5/7 5 General roughing-in wood
4C-9945 305 mm (12 in) 6 5 General roughing-in wood

Terminal Tool Group - 435-5074

Warranty: Caterpillar Standard Warranty, 6 months
• Tools set for most domestic computer connectors and terminals
• Designed for weather pack and pack-con terminals with flat blade to open con-
nectors and fork for ALDL connectors to access trouble codes
• Individual handles for easy access in tight spaces
• Storage case
• Kit includes:
GM C3 System Terminal Tools (red handle)
Spring Loaded Tube 1/8 x 1 in (3.3 mm x 28 mm)
Square Blade 1/16 x 3/4 in (1.4 x 19 mm)
Flat Blade 1/16 x 1 in (1.5 x 24.75 mm)
Flat Blade 5/64 x 1 in (2 x 23 mm)
Fork Blade 5/16 x 1 in (8 x 24 mm)
Flat Blade Screwdriver 3/16 x 1 in (4.75 x 24 mm)

Wire Terminal Tools (green handle)

Tube 1/8 x 1 in (3.3 x 28 mm)
Tube 11/64 x 1/2 in (4.3 x 13 mm)
Tube 5/32 x 1/2 in (3.75 x 13 mm)
Tube 1/8 x 1/2 in (3 x 13 mm)
Flat Twin Blade 1/8 in (3 mm)
Twin Blade 1/16 in (1.6 mm)

Part Number Description

435-5074 Terminal Tool Group

184
 Tool Boxes
Cat 55-Inch Tool Boxes
Warranty: Manufacturer, Lifetime
• Heavy-duty welded construction
• Full-length double walls
• Steel gusset reinforced corners
• Multiple applications of powder coat paint
• Soft, durable wheels reduce vibration and last a lifetime
• Two banks of drawers — 70/30 split
• Long-lasting ball bearing drawer slides
• Lock 'n Roll drawers keeps them secure during movement
• Each drawer holds up to 125 pounds
• Doubled over drawer edges make them smooth and rigid
• Deep, comfortable drawer pulls
• Top drawer of the roller cabinet is a full width drawer with two slides and four
welded drawer supports to hold up to 250 pounds
• Bottom drawer of the roller cabinet has two slides to hold up to 250 pounds
• Upgraded drawer pads
55-Inch Top Chests
• 10 Drawers
• 1 Top Storage Compartment
• Dimensions: 55" W x 24" D x 21" H (140 cm W x 61 cm D x 53 cm H)
• Volume: 13,600 cubic inches (222,863 cm³)
• Surface Area: 4,000 square inches (65,548 cm²)
• Capacity: 1,400 lbs (635 kg)
55-Inch Roller Cabinets
• 11 Drawers
• Dimensions: 55" W x 24" D x 39" H (140 cm W x 61 cm D x 99 cm H)
• Volume: 25,000 cubic inches (409,675 cm³)
• Surface Area: 6,300 square inches (40,645 cm²)
• Capacity: 2,400 lbs (1,089 kg)

Part Number Color

55-Inch Roller Cabinets
385-1731 Black

185
Tool Boxes
Cat 40-Inch Tool Boxes
Warranty: Manufacturer, Lifetime
• Heavy-duty welded construction
• Full-length double walls
• Steel gusset reinforced corners
• Multiple applications of powder coat paint
• Long-lasting ball bearing drawer slides
• Lock 'n Roll drawers keeps them secure during movement
• Each drawer holds up to 100 pounds
• Doubled over drawer edges make them smooth and rigid
• Deep, comfortable drawer pulls
• Upgraded drawer pads
• Cat branded
40-Inch Top Chests
• 4 Drawers
• 1 Top Storage Compartment
• Dimensions: 40" W x 20" D x 19" H (101 cm W x 51 cm D x 50 cm H)
• Volume: 9,800 cubic inches (160,593 cm³)
• Surface Area: 3,200 square inches (20,645 cm²)
• Capacity: 1,400 lbs (635 kg)
40-Inch Roller Cabinets
• 7 Drawers
• Dimensions: 40" W x 20" D x 38" H (101 cm W x 51 cm D x 98 cm H)
• Volume: 15,000 cubic inches (245,805 cm³)
• Surface Area: 4,250 square inches (27,419 cm²)
• Capacity: 2,400 lbs (1,089 kg)

Part Number Color

40-Inch Top Chests
385-1726 Black
385-1728 Red
40-Inch Roller Cabinets
385-1727 Black
385-1729 Red

186
 Tool Boxes
Cat 26-Inch Tool Boxes
Warranty: Manufacturer, Lifetime
• Heavy-duty welded construction
• Full length double walls
• Steel gusset reinforced corners
• Multiple applications of powder coat paint
• Long-lasting ball bearing drawer slides
• Lock 'n Roll drawers keeps them secure during movement
• Each drawer holds up to 100 pounds
• Doubled over drawer edges make them smooth and rigid
• Deep, comfortable drawer pulls
• Upgraded drawer pads
• Cat branded
26-Inch Top Chests
• 4 Drawers
• 1 Top Storage Compartment
• Dimensions: 26" W x 20" D x 19" H (66 cm W x 51 cm D x 49 cm H)
• Volume: 6,200 cubic inches (101,599 cm³)
• Surface Area: 2,000 square inches (12,903 cm²)
• Capacity: 650 lbs (295 kg)
26-Inch Roller Cabinets
• 7 Drawers
• Dimensions: 26" W x 20" D x 37" H (66 cm W x 51 cm D x 94 cm H)
• Volume: 10,000 cubic inches (163,870 cm³)
• Surface Area: 2,400 square inches (15,484 cm²)
• Capacity: 1,100 lbs (499 kg)

Part Number Color

26-Inch Top Chests
385-1722 Black
385-1724 Red
26-Inch Roller Cabinets
385-1723 Black
385-1725 Red

187
Tool Boxes
Drop Front Tool Chest - 329-6983
Warranty: Manufacturer, Lifetime
• Heavy-duty welded construction
• Full-length double walls
• Doubled over drawer edges make them smooth and rigid
• Ball bearing drawer slides
• Powder coat paint
• Round key lock
• Locking components welded securely inside box
• Drop down front lid for extra security
• Durable side handles
• Cat Branded
26-inch Drop Front Tool Chest
• 5 Drawers
• 1 Top Storage Compartment
• Dimensions: 26" W x 15" D x 17" H(66 cm W x 37 cm D x 44 cm H)
• Volume: 4,452 cubic inches (72,955 cm³)
• Surface Area: square inches 1,814 (11,703 cm²)
• Capacity: 650 pounds (295 kg)

Part Number Description Color

329-6983 Drop Front Tool Chest Black

Cat Well Cabinet - 471-9317

Warranty: Manufactures, lifetime
• 18 gauge SRS steel
• Black power coat finish
• Built-in metal pegboard (1/4 hole diameter)
• Hardware assortment
• Mounted clasp for locking
• Doors lock open
• Dimensions (closed): 36" W x 9.75" D x 36" H (914 mm W x 248 mm D x 914 mm H)
• Dimensions (open): 72" W x 5.75" D x 36" H (1826 mm W x 146 mm D x 914 mm H)

188
 Tool Boxes
Cat Multi-Purpose Roll Cart - 385-1737
Warranty: Manufacturer, Lifetime
• Multi-purpose roll cart
• Black
• Lockable Drawer
• 32" W x 18" D x 36" H (81 cm W x 46 cm D x 91 cm H)
• 3" (8 cm) deep tray
• 150 lbs (68 kg) load capacity per tray
• Weight capacity: 350 lbs (159 kg)
• Cat branded

Part Number Description

385-1737 Cat Multi-Purpose Roll Cart

All-Purpose Roll Cart - 385-1738

Warranty: Manufacturer, Lifetime
• Rugged all-purpose cart
• Black
• Drain hole in top shelf
• 36" W x 24" D x 38" H (91 cm W x 61 cm D x 97 cm H)
• Weight capacity: 500 lbs (227 kg)

Part Number Description

385-1738 All-Purpose Roll Cart

Tool Bag with Carrying Strap - 248-2283

Warranty: Caterpillar Standard Warranty, 6 Months
• Nine pockets and ten tool-holding loops on the outside
• Twelve pockets on the inside for holding additional tools

Part
Number Description Length Material
248-2283 Tool Bag with Carrying Strap 0.61 m (24 in) Cloth

189
Tool Boxes
Cordura Cloth Tool Bag
Warranty: Caterpillar Standard Warranty, 6 Months
• Durable cloth tool bag made of Cordura fabric
• Cat Branded Tool bag

Part
Number Color Size
211-0136 Black 610.0 mm x 203.0 mm x 159.0 mm (24.00 in x 8.00 in x 6.25 in)

Heavy Duty Plastic Tool Box - 329-6922

Warranty: Caterpillar Standard Warranty, 6 Months
• Heavy duty plastic tool box with tray
• Recessed handle
• Two steel latches
• Padlock eyes
• Yellow and black
• 23 in W x 10 1/2 in D x 10 in L

Part Number Description

329-6922 Heavy Duty Plastic Tool Box

Tool Box - 9U-6219

Warranty: Manufacturer, Lifetime
• Black, steel construction
• Tote tray included

Part Number Description Length Width Height Material

9U-6219 Tool Box 508 mm (20 in) 219.08 mm (8.63 in) 219.08 mm (8.63 in) Steel

Lock - 174-9803
Warranty: Caterpillar Standard Warranty, 6 months
• Replacement Barrel Lock kit

Part Number Description

174-9803 Lock with two keys

190
 Tool Boxes
Lock Kit - 5P-4724
Warranty: Lifetime
• Replacement Flat Lock kit

Part Number Description

5P-4724 Lock Kit

Metal Storage Boxes with Hinged Lids and Socket Trays

Warranty: Manufacturer, 90 Day
Part Number Description Length Width Height Storage Capacity (in3) Color
5P-0946 Box 457.2 mm (18.0 in) 254.0 mm (10.0 in) 127.0 mm (5.0 in) 900.0 Orange
5S-6092 Tool Box 788.67 mm (31.06 in) 317.5 mm (22.5 in) 146.05 mm (5.75 in) – Red
9S-1725 Case 159.5 mm (6.28 in) 103.1 mm (4.06 in) 25.4 mm (1.0 in) – Red

Plastic Tool Box - 202-8643

Warranty: Manufacturer, 60 Day
• Plastic, water-tight container
• Will not rust or scratch

Part
Number Description Dimension Tool Box Capacity Color
202-8643 Tool Box (plastic) 514.4 x 212.7 x 225.4 mm (20.25 x 8.37 x 8.87 in) 9 kg (20 lbs) Gray

Case and Dividers

Warranty: Caterpillar Standard Warranty, 6 Months
• Used for organizing fastener groups and other small reusable items
• Convenient to transport to a field site due to compact size
• Overall case dimensions: 457 x 305 x 76 mm (18.0 x 12.0 x 3.0 in)
• Dividers can partition case to a maximum of 48 bins
• Dividers in packages of 12 each

Part Number of
Number Description Compartments Outside Dimensions
178-2212 Case – 457 mm L x 305 mm W x 127 mm D (18 in L x 12 in W x 3 in D)
178-2213 Dividers 48 bins –

191
Tool Boxes
Plastic Storage Cases with Hinged Lids
Warranty: Manufacturer, 60 Day
• Impact-resistant
• Textured surface to prevent scratches

Length (A) Length (B) Length (C) Depth (D) Depth (E)
Part (exterior, (exterior, (exterior, (exterior, (exterior, Handle Number of
Number interior) interior) interior) interior) interior) Material Latches Color
148-5675 216 mm (8.50 in), 198 mm (7.81 in), 90 mm (3.56 in), 20 mm (0.78 in), 70 mm (2.75 in), No One Black
192 mm (7.56 in) 149 mm (5.88 in) 83 mm (3.25 in) 17 mm (0.67 in) 66 mm (2.60 in)
4C-3975 394 mm (15.50 311 mm (12.25 140 mm (5.50 in), 44 mm (1.75 in), 95 mm (3.75 in), Yes Two Black
in), 356 mm in), 273 mm 127 mm (5.00 in) 35 mm (1.38 in) 92 mm (3.63 in)
(14.00 in) (10.75 in)
4C-4730 660mm (26.00 421mm (16.56 114 mm (4.50 in), 23 mm (0.90 in), 84 mm (3.31 in), Yes Two Gray
in), 622 mm in), 330 mm 102 mm (4.00 in) 20 mm (0.78 in) 79 mm (3.12 in)
(24.50 in) (13.00 in)
6V-3072 394 mm (15.50 311 mm (12.25 102 mm (4.00 in), 25 mm (1.00 in), 76 mm (3.00 in), Yes Two Black
in), 356 mm in), 273 mm 89 mm (3.50 in) 16 mm (0.63 in) 73 mm (2.63 in)
(14.00 in) (10.75 in)
6V-3073 311 mm (12.25 224 mm (8.81 in), 99 mm (3.88 in), 30 mm (1.19 in), 68 mm (2.69 in), Yes Two Black
in), 289 mm 178 mm (7.00 in) 90 mm (3.56 in) 24 mm (0.94 in) 65 mm (2.56 in)
(11.38 in)
6V-3112 254 mm (10.00 191 mm (7.50 in), 30mm (1.18 in), – – No None Black
in), 238 mm (9.38 170 mm (6.69 in) 24 mm (0.94 in)
in)
6V-6045 191 mm (7.50 in), 102 mm (4.00 in), 41 mm (1.63 in), 10 mm(0.38 in), 3 31 mm (1.25 in), No One Black
173 mm (6.81 in) 81 mm (3.19 in) 33 mm (1.31 in) mm (0.13 in) 30 mm (1.19 in)
6V-7145 470 mm (18.50 395 mm (15.56 127 mm (5.00 in), 43 mm (1.70 in), 84 mm (3.31 in), Yes Two Black
in), 432 mm in), 330 mm 114 mm (4.50 in) 35 mm (1.38 in) 79 mm (3.12 in)
(17.00 in) (13.00 in)
6V-9449 470 mm (18.50 395 mm (15.56 203 mm (8.00 in), 102 mm (4.00 in), 101 mm (3.96 in), Yes Two Black
in), 432 mm in), 330 mm 187 mm (7.38 in) 89 mm (3.50 in) 82.5 mm (3.25 in)
(17.00 in) (13.00 in)
8T-0841 394 mm (15.50 311 mm (12.25 191 mm (7.50 in), 95 mm (3.75 in), 95 mm (3.75 in), Yes Two Black
in), 356 mm in), 273 mm 175 mm (6.88 in) 83 mm (3.27 in) 92 mm (3.63 in)
(14.00 in) (10.75 in)

Foam Block for Plastic Storage Cases

Warranty: Caterpillar Standard Warranty, 6 Months
Part
Number Length Width Thickness Material Color Convoluted
148-5677 165 mm (6.5 in) 200 mm (7.9 in) 38 mm (1.5 in) Etherfoam(1) Charcoal No
2P-8289 457.2 mm (18.0 in) 254 mm (10.0 in) 50.8 mm (2.0 in) Esterfoam(2) Charcoal Yes
3P-1549 386.08 mm (15.2 in) 279.4 mm (11.0 in) 12.7 mm (.05 in) Ethafoam(3) Black No
6V-4094 279.4 mm (11.0 in) 170.18 mm (6.7 in) 38.1 mm (1.5 in) Esterfoam(2) Charcoal Yes
6V-4873 360.68 mm (14.2 in) 279.4 mm (11.0 in) 12.7 mm (0.5 in) Ethafoam(3) Black No
6V-6044 353.06 mm (13.9 in) 264.16 mm (10.4 in) 25.4 mm (1.0 in) Ethafoam(3) Black No

1 Lightweight
2 General Purpose
3 Dense

192
 Tool Boxes
Foam Block for Plastic Storage Cases (Cont'd.)
Part
Number Length Width Thickness Material Color Convoluted
6V-6096 190.5 mm (7.5 in) 149.86 mm (5.9 in) 12.7 mm (0.5 in) Ethafoam(4) Black No
6V-6105 350.52 mm (13.8 in) 254 mm (10.0 in) 12.7 mm (0.5 in) Etherfoam(5) Charcoal No
6V-6107 190.5 mm (7.5 in) 149.86 mm (5.9 in) 27.94 mm (1.1 in) Ethafoam(4) Black No
6V-6126 365.76 mm (14.4 in) 276.86 mm (10.9 in) 73.7 mm (2.9 in) Ethafoam(4) Black No
8S-5128 520.7 mm (20.5 in) 223.52 mm (8.8 in) 50.8 mm (2.0 in) Esterfoam(6) Charcoal Yes
8T-3153 322.58 mm (12.7 in) 238.76 mm (9.4 in) 10.16 mm (0.4 in) Ethafoam(4) Black No
9S-8105 482.6 mm (19.0 in) 431.8 mm (14.0 in) 38.1 mm (1.5 in) Ethafoam(4) Charcoal Yes

Plastic Divided Utility Boxes with Hinged Lids

Warranty: Manufacturer, 60 Day
• Heavy-duty plastic boxes for organizing, storing, and protecting
small parts
• Yellow polypropylene material—resistant to oils, solvents and
common chemicals
• Rustproof, dentproof, spark proof, and non-conductive

Part Number of
Number Length Width Thickness Color Compartments Size
152-7997 470.0 mm (18.5 in) 332 mm (13.07 in) 77 mm (3.03 in) Yellow 21 –
4C-3722 332.74 mm (13.10 in) 228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 12 50.80 x 104.14 mm (2.00
x 4.10 in)
4C-3723 332.74 mm (13.10 in) 228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 6, 12 50.80 x 101.60 mm (2.00
x 4.10 in), 50.80 x 50.80
mm (2.00 x 2.00 in)
4C-3724 332.74 mm (13.10 in) 228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 24 50.80 x 50.80 mm (2.00
x 2.00 in)
4C-3725 332.74 mm (13.10 in) 228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 3, 6 104.14 x 104.14 mm
(4.10 x 4.10 in), 50.80 x
104.14 mm (2.00 x 4.10
in)
4C-4463 332.74 mm (13.10 in) 228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 4, 1, 1 50.80 x 104.14 mm (2.00
x 4.10 in), 104.14 x
104.14 mm (4.10 x 4.10

4 Dense
5 Lightweight
6 General Purpose

193
Tool Boxes
Plastic Divided Utility Boxes with Hinged Lids (Cont'd.)
Part Number of
Number Length Width Thickness Color Compartments Size
in), 104.14 x 317.50 mm
(4.10 x 12.50 in)
4C-4783 381 mm (15.00 in) 298.5 mm (11.75 in) 63.50 mm (2.50 in) Gray/See-through 9-24 15 Removable Dividers
Smoke Gray
4C-4787 177.80 mm (7.00 in) 95.3 mm (3.75 in) 31.75 mm (1.25 in) Opaque 8, 1 35.05 x 41.15 mm (1.38
x 1.62 in), 28.45 x 82.55
mm (1.12 x 3.25 in)
4C-4789 209.55 mm (8.25 in) 114.3 mm (8.66 in) 35.05 mm (1.38 in) Opaque 12 31.75 x 50.80 mm (1.25
x 2.00 in)
6V-3007 332.74 mm (13.10 in)(7) 220 mm (8.66 in) 58.42 mm (2.30 in) Opaque 13, 1, 1, 1 50.80 x 50.80 mm (2.00
x 2.00 in), 50.80 x
158.75 mm (2.00 x 6.25
in), 50.80 x 212.85 mm
(2.00 x 8.38 in), 104.65 x
104.65 mm (4.12 x 4.12
in)

Protector Cases - Pelican Line

Warranty: Manufacturer, Lifetime
• Make an excellent lockable storage vault when equipment is not in use - just apply a lock
• Strong, double-throw latches - easier to open with a light pull
• Watertight, airtight, dust proof - Pelican cases feature an exclusive 6.5 mm (1/4 in) neoprene "O" ring, to guarantee
a perfect seal. Neither dust nor water can penetrate this barrier to harm your equipment. These cases are so air-
tight and watertight they float even when loaded. The "O" ring is easily replaced if damaged.
• Purge valve - The exclusive built-in "O" ring purge valve is sealed for pressure allowing for quick equalization after
changes in altitude or temperature.
• Dentproof - The tough, cushioned, protective shell eliminates damage from bumping, jarring, and even airline
shipments
• Protect contents inside - Multiple layers of industrial grade photographic foam secure and cushion equipment
• Custom fit for tooling - The "Pick-N'Pluck" center foam section is pre-scored for quick and clean custom fitting.
The case lid is lined with the same convoluted foam for maximum shock protection
• Lightweight - easy to carry by using the comfortable, molded handle (4C-9650 and 4C-9658 have fold-down
handles.)
• All cases are gray

7 Warranty: Six Months

194
 Tool Boxes
Protector Cases - Pelican Line (Cont'd.)

Replace-
Part Outside Outside Outside Inside Inside Inside Shipping Replacement ment O-
Number Description Length Width Depth Length Width Depth Weight Weight Foam Set Ring
4C-9650(8) Pelican Mini 273 mm 247.7 mm 127 mm 241 mm 191 mm 114 mm (4 .91 kg 1.6 kg 4C-9651, 4C-9739
S Case™ (10 3/4 in) (9 3/4 in) (5 in) (9 1/2 in) (7 1/2 in) 1/2 in) (2 lb) (3 lb) 3 Pc.
(Fold-down
handle)
4C-9652 Pelican Mini 273 mm 247.7 mm 177.8 mm 241 mm 191 mm 165 mm (6 1.13 kg 1.59 kg 4C-9653, –
D Case™ (10 3/4 in) (9 3/4 in) (7 in) (9 1/2 in) (7 1/2 in) 1/2 in) (2 1/2 lb) (3 1/2 lb) 3 Pc.
4C-9654 Pelicase™ 343 mm 327 mm 152 mm 311 mm 235 mm 133 mm (5 1.8 kg 2.5 kg 4C-9655, 4C-9741
(13 1/2 in) (12 7/8 in) (6 in) (12 1/4 in) (9 1/4 in) 1/4 in) (4 lb) (5 1/2 lb) 3 Pc.
4C-9656 Pelican 470 mm 387 mm 175 mm 432 mm 299 mm 152 mm (6 3.2 kg 3.9 kg 4C-9657, 4C-9742
Case™ (18 1/2 in) (15 1/4 in) (6 7/8 in) (17 in) (11 3/4 in) in) (7 lb) (8 1/2 lb) 3 Pc.
4C-9658(8) Case - 521 mm 425 mm 216 mm 483 mm 356 mm 197 mm (7 4.5 kg 6.2 kg 4C-9659, 4C-9743
Protective (20 1/2 in) (16 3/4 in) (8 1/2 in) (19 in) (14 in) /34 in) (10 lb) (14 lb) 4 Pc.
4C-9660 Carry Case 591 mm ( 527 mm 229 mm 559 mm 432 mm 203 mm (8 6 kg 11.5 kg – 4C-9744
23 1/4 in) (20 3/4 in) (9 in) (22 in) (17 in) in) (13 lb) (17 lb)
4C-9662 Instrument 940 mm 445 mm 152 mm 914 mm 343 mm 127 mm (5 6.8 kg 7.7 kg 4C-9663, 4C-9745
Case, 355 x (37 in) (17 1/2 in) (6 in) (36 in) (13 1/2 in) in) (15 lb) (17 lb) 3 Pc.
832 x 115 mm
(14.0 x 32.8 x
4.5 in)
4C-9664(9) Travel Vault 1321 mm 445 mm 152 mm 1289 mm 323 mm 127 mm (5 11.8 kg 13 kg 4C-9665, 4C-9746
(52 in) (17 1/2 in) (6 in) (50 3/4 in) (13 1/2 in) in) (26 lb) (29 lb) 3 Pc.

8 Fold-down handle
9 Supplied with regular foam; Pick-N’Pluch is not available

195
 Shop Supplies
Abrasives — Brushes............................................................................................................... 206
Radial Knot Brushes — Stringer Bead-Type Wheels ................................................................ 206
Bench Grinder Wire Brushes ............................................................................................... 206
Cylinder Block Cleaning Brushes .......................................................................................... 206
Interleaf Flap Brush ........................................................................................................... 207
Crimped End Wire Brushes ................................................................................................. 207
Cup End Wire Brushes ....................................................................................................... 208
Stem Mount Wire Brushes .................................................................................................. 208
Abrasives — Discs .................................................................................................................. 209
Type 29 Zirconium Flap Discs ............................................................................................... 209
Type 29 Zirconium Flap Disc with 5/8 -11 Hub .......................................................................... 209
Hi-Density Zirconium Flap Disc with 5/8 -11 Hub ...................................................................... 210
Aluminum Oxide Surface Reconditioning Discs ....................................................................... 210
Surface Reconditioning Discs — Superior Edge Wear .............................................................. 211
Disc Pad Holders............................................................................................................... 211
Roloc Surface Conditioning Discs ......................................................................................... 212
Surface Reconditioning Discs for Aluminum Surfaces .............................................................. 213
Aluminum Oxide Discs........................................................................................................ 214
Surface Reconditioning Discs — Bolt-On Style ....................................................................... 214
Roloc Holders and Threaded Shaft Bristle Discs...................................................................... 215
Aluminum Oxide Fiber Discs ................................................................................................ 216
Bristle Discs..................................................................................................................... 217
Rib-flow Backing Pads for Fiber Disc..................................................................................... 217
R - Type Mini Grinding Discs................................................................................................ 218
Discs .............................................................................................................................. 218
PSA Stick-It Discs ............................................................................................................. 219
PSA Discs, Glue Backed, PSA/No Hole .................................................................................. 219
PSA Sanding Discs ............................................................................................................ 219
Hook and Loop Aluminum Oxide Film Back Sanding Discs ......................................................... 220
Hook and Loop Sanding Pads .............................................................................................. 220
Abrasives — Wheels ............................................................................................................... 221
Clean 'N Strip Silicon Carbide Unitized Wheels ....................................................................... 221
Light Silicon Carbide Deburring Wheel .................................................................................. 221
Type 27 High Performance Zirconium Grinding Wheels ............................................................. 222
Type 27 Aluminum Oxide 4 inch Grinding Wheel....................................................................... 222
Finishing Flap Aluminum Oxide Brush Wheel........................................................................... 223
Level Cut Aluminum Oxide Unitized Wheel.............................................................................. 223
Threaded Flap Wheels ....................................................................................................... 224
Mandrels ......................................................................................................................... 224
Surface Condition Brush ..................................................................................................... 225
Aluminum Oxide Large Flap Wheel Sander ............................................................................. 225
1/4 Inch Shank Abrasive Flap Wheels.................................................................................... 225
Zirconium Raised Hub Wheels ............................................................................................. 226
Aluminum Oxide Raised Hub Wheels..................................................................................... 227
Cut-Off Wheels ................................................................................................................. 227
Thin Cut Abrasive Cutting Wheels......................................................................................... 229
Drill Sharpening Wheels (Type 1) .......................................................................................... 229
Mandrel for Small Abrasive Wheels ...................................................................................... 229
Portable Wheels — Reinforced (Type 1) ................................................................................ 230
Bench and Pedestal Wheels (Type 1) .................................................................................... 230
Aluminum Oxide Flaring Cup Snagging Wheels (Type 11) ........................................................... 231
Mandrel #936.................................................................................................................... 231
Abrasives — Miscellaneous...................................................................................................... 232
Abrasive Hand Pads .......................................................................................................... 232
Aluminum Oxide Cutting and Polishing Rolls ........................................................................... 232
Adapter Mandrel #935 ........................................................................................................ 233

197
Shop Supplies
Polishing Stone ................................................................................................................. 233
Sanding Cloth Rolls............................................................................................................ 233
Sanding Sheets................................................................................................................. 234
Surface Conditioning Belts .................................................................................................. 235
Sanding Belts ................................................................................................................... 235
Aluminum Oxide Cleaning and Polishing Stars......................................................................... 235
Surface Reconditioning Flex-Hone Tools ................................................................................ 236
Mounted Points ................................................................................................................ 237
Threaded Cones and Plugs.................................................................................................. 238
Carbide Burrs ................................................................................................................... 239
Aluma Cut Carbide Burrs .................................................................................................... 239
Spira Bands ..................................................................................................................... 239
Screen-Bak Durite Rolls ..................................................................................................... 240
Decal Removal.................................................................................................................. 240
Nylon Cleaning Brushes ..................................................................................................... 241
Tube Brush ...................................................................................................................... 241
Brass Bristle Cleaning Brush ............................................................................................... 241
Parts Cleaning Brush ......................................................................................................... 242
Metal Cutting — Drill Bits......................................................................................................... 243
Standard Drill Bits ............................................................................................................. 243
Reduced Shank Drill Bits .................................................................................................... 244
Heavy-Duty Drill Bits, 135° Split Point .................................................................................... 244
Extra Heavy-Duty Cobalt Drill Bits, 135° Split Point ................................................................... 245
Aircraft Drill Bits ............................................................................................................... 246
Left Hand Drill Bits............................................................................................................. 247
Metric Standard Drill Bits.................................................................................................... 247
Drill Bit Index - 4C-3385 ...................................................................................................... 248
Drill Extension - 4C-4426 ..................................................................................................... 248
Recommended Drill Bit Sizes for Metric Thread....................................................................... 248
Metal Cutting — Taps and Dies .................................................................................................. 249
Abbreviations Used for Taps and Dies ................................................................................... 249
Hand Taps........................................................................................................................ 249
Machine Screw Set - 1P-3020 .............................................................................................. 250
Fractional Size Tap Set - 1P-3070 .......................................................................................... 251
Fractional Size Tap Set - 1P-3050 .......................................................................................... 251
Special Thread Taps .......................................................................................................... 252
Rethreading Dies............................................................................................................... 252
Hexagon Rethreading Fractional Die Set - 1P-3000................................................................... 252
Hexagon Rethreading Metric Die Set - 4C-4963 ....................................................................... 254
Hexagon Rethreading Pipe Dies - Individual ........................................................................... 254
Special Rethreading Dies.................................................................................................... 254
Universal Outside Thread Chasers ........................................................................................ 255
Thread File Group - 154-9315................................................................................................ 255
Taper Pipe Tap Set - 2P-5530 ............................................................................................... 256
Metric Size Taps - Individual................................................................................................ 256
Tap Wrenches .................................................................................................................. 257
Metal Cutting — Extractors ....................................................................................................... 258
Individual Extractors .......................................................................................................... 258
Extractor Sets................................................................................................................... 259
Left Hand Spiral Screw Extractor - 1B-9925 ............................................................................ 259
Extractor Set, 10 piece - 282-2108 ......................................................................................... 260
Stud Remover Set - 2P-5535 ................................................................................................ 260
Stud Remover and Resetter Tool Set, 1/4 through 5/8 in - 8S-1378................................................ 261
Metric Stud Installers......................................................................................................... 262
Metal Cutting — Cutting Torch Equipment.................................................................................... 263
Mini Cutting Torch - 8T-7792 ................................................................................................ 263

198
 Shop Supplies
Metal Cutting — Miscellaneous................................................................................................. 264
Surface Texture Replica (Comparison) - 9A-1593...................................................................... 264
Metal Etching Pen ............................................................................................................. 264
Metal Repair........................................................................................................................... 265
Full-Torque® Thread Repair Kits ........................................................................................... 265
263-7147 Lock-N-Stitch® Crack Repair Kit............................................................................... 266
Heli-Coil® Inserts .............................................................................................................. 267
Master Thread Repair Sets ................................................................................................. 268
Metric Master Thread Repair Set - 4C-8366 ............................................................................ 269
Metric Master Thread Repair............................................................................................... 270
Metric Thread Repair Kits ................................................................................................... 270
Spark Plug Thread Repair ................................................................................................... 271
Carded Inserts .................................................................................................................. 271
Inserts for Specific Engine Applications................................................................................. 273
Inserts for Specific Engine Applications................................................................................. 273
Thread Inserts .................................................................................................................. 274
English and Metric Thread Insert Master Kits ......................................................................... 276
Insert Kits and Replacement Kits .......................................................................................... 276
Installation Tools and Thread Inserts ..................................................................................... 278
Weld Wire ....................................................................................................................... 279
Caps and Plugs ....................................................................................................................... 281
Cap and Plug Kit - 276-7018 ................................................................................................. 281
Conduit Covers ................................................................................................................. 281
ORFS Plugs ...................................................................................................................... 282
JIC 37° Plugs .................................................................................................................... 282
Straight Thread O-Ring - Hex Head Plugs ............................................................................... 283
Straight Thread O-Ring - Hex Drive Plugs ............................................................................... 283
Pipe - Hex Head Plugs........................................................................................................ 283
Pipe - Square Head Plugs ................................................................................................... 284
Pipe - Square Drive Plugs ................................................................................................... 284
Pipe - Hex Drive Plugs........................................................................................................ 284
JIS - BSPP Shipping Plugs .................................................................................................. 285
Metric Plugs..................................................................................................................... 285
SAE Code 61 Flange Port Cover ............................................................................................ 285
Cat Flange Port Cover......................................................................................................... 286
Tapered Dual-Function Caps and Plugs.................................................................................. 286
Straight Cap ..................................................................................................................... 288
Non-threaded Caps ........................................................................................................... 288
Metric Threaded Cap Protectors .......................................................................................... 289
Metric Threaded Plug Protectors.......................................................................................... 289
Threaded Plug Protectors for Flared Fittings ........................................................................... 290
Threaded and Slotted Plug Protectors ................................................................................... 290
Plug Protectors for NPT Thread - Square Head ....................................................................... 290
Plug Protectors for NPT Thread - Knurled Head ...................................................................... 291
Tear Cap Protectors for Standard Thread ............................................................................... 292
SAE Code Flange 61 Bolted Protectors .................................................................................. 292
British Thread - BSP/GAS Plug Protectors.............................................................................. 293
SAE Code 62 and Caterpillar Flange Bolted Protectors .............................................................. 293
Vises ..................................................................................................................................... 294
Tradesman Vises ............................................................................................................... 294
Machinist Vises ................................................................................................................ 294
6 1/2" Tradesman Vise - 377-5722 .......................................................................................... 295
Combination Pipe and Bench Vises....................................................................................... 295
Model R — Rubber Face Magnefix Jaw Caps ......................................................................... 295
Model P — Prism Magnefix Jaw Caps .................................................................................. 296
Jaw Caps ........................................................................................................................ 296

199
Shop Supplies
Holding Fixture.................................................................................................................. 296
Yoke Pipe Vise .................................................................................................................. 297
Regular Duty, Standard Throat C-Clamps................................................................................ 297
Battery Service Equipment ........................................................................................................ 298
Cat Battery Tester ............................................................................................................. 298
Multi-Battery Parallel Chargers............................................................................................ 299
Bus Bar Set - 4C-4917 ........................................................................................................ 300
Battery Charging Rack ....................................................................................................... 300
Heavy-Duty Commercial Fast Chargers .................................................................................. 301
Portable Chargers ............................................................................................................. 302
Extra Heavy-Duty Plug-In Starting System .............................................................................. 303
Heavy-Duty Plug-In Starting System...................................................................................... 303
Flush Mount Power Socket ................................................................................................. 304
Booster Cables ................................................................................................................. 304
Replacement Clamps ......................................................................................................... 305
Battery Post Set................................................................................................................ 305
Cables............................................................................................................................. 305
Battery Cable Repair Kit - 6V-3025 ........................................................................................ 306
Lighting and Electrical Products — Flashlights and Batteries .......................................................... 307
Mini-Maglite Flashlight ....................................................................................................... 307
Heavy-Duty Professional Flashlights...................................................................................... 307
Heavy-Duty Professional Rechargeable Flashlight Accessories .................................................. 307
Heavy-Duty Flashlights ....................................................................................................... 308
Continuity Tester/Flashlight.................................................................................................. 308
Inspection Light - 141-1655 .................................................................................................. 309
Industrial Batteries ............................................................................................................ 309
Pen Light ......................................................................................................................... 310
Hi-Energy Battery Charger .................................................................................................. 310
AA Rechargeable Batteries ................................................................................................. 311
Lantern Battery ................................................................................................................. 311
Lighting and Electrical Products — Work Lights and Extension Cords............................................... 312
Portable Fluorescent Work Lights ......................................................................................... 312
Accessories for Light Assemblies ......................................................................................... 312
Fluorescent Light Kit .......................................................................................................... 312
Ratchet Light .................................................................................................................... 313
Angle Light Reel................................................................................................................ 313
Angle Light....................................................................................................................... 314
Triple-Tap Extension Cord.................................................................................................... 314
Light Rover....................................................................................................................... 315
Work Light ....................................................................................................................... 315
Electrical Cord Definitions ................................................................................................... 316
Heavy-duty Contractor and Industrial Application Extension Cords.............................................. 316
Heavy-Duty Connectors and Plugs (20-30 Amps) with Insulating Cord Grip.................................... 317
Lighting and Electrical Products — Miscellaneous........................................................................ 318
Rubber Splicing Compound ................................................................................................. 318
Wire Marker Tape Dispenser ............................................................................................... 318
Crimping Tools .................................................................................................................. 319
Heat Shrinking Tubing ........................................................................................................ 319
Heat Shrinking Butt Connector ............................................................................................. 319
Cold Shrink Insulators ........................................................................................................ 320
Wedge Removal Tool ......................................................................................................... 320
Straight Blade Plugs and Connectors .................................................................................... 320
Sure Seal Series Field Service Kit......................................................................................... 321
Personal Protective Equipment — Gloves .................................................................................... 323
Utility Glove...................................................................................................................... 323
Utility Gloves .................................................................................................................... 323

200
 Shop Supplies
Impact Gloves................................................................................................................... 324
Insulated Gloves ............................................................................................................... 324
Fingerless Gloves .............................................................................................................. 325
Padded Utility Glove........................................................................................................... 325
High Visibility Padded Utility Glove........................................................................................ 326
Water-Resistant Utility Glove ............................................................................................... 326
Leather-Driver Glove .......................................................................................................... 327
High-Visibility Leather Driver Glove ....................................................................................... 327
High-Visibility Leather Palm Glove ........................................................................................ 327
Fingerless Leather Glove..................................................................................................... 328
Unlined Grain Leather Driver's Gloves ................................................................................... 328
Lined Leather Driver's Gloves .............................................................................................. 328
Split Leather Palm Gloves ................................................................................................... 329
Split Cowhide Palm Gloves .................................................................................................. 329
Traditional All-purpose Gloves ............................................................................................. 329
Fleece-Lined Dotted Jersey Glove ........................................................................................ 330
Dotted Jersey Glove .......................................................................................................... 330
Jersey Gloves................................................................................................................... 330
Fleeced Gloves ................................................................................................................. 331
Leather Welding Gloves...................................................................................................... 331
Chemical-resistant Nitrile Gloves.......................................................................................... 331
Neoprene-coated Gloves .................................................................................................... 332
Nitrile-coated Knit-lined Gloves............................................................................................ 332
Neox Gloves with Neoprene Coating ..................................................................................... 332
Neoprene-coated Knit-lined Gloves ...................................................................................... 333
Best Nitrile Disposable Gloves ............................................................................................. 333
Disposable Powder-Free Nitrile Gloves .................................................................................. 333
Disposable Powdered Nitrile Gloves ..................................................................................... 334
Disposable Latex Gloves ..................................................................................................... 334
Nitrile Coated Glove........................................................................................................... 334
High-Visibility Nitrile Coated String Knit Glove ......................................................................... 335
Nitrile Coated Bamboo Glove ............................................................................................... 335
Cut Resistant Gloves, Level 2 ............................................................................................... 335
Cut Resistant Gloves, Level 4 ............................................................................................... 336
Nylon Gloves with Nitrile Coating ......................................................................................... 336
Personal Protective Equipment — Safety Vests............................................................................. 337
Safety Vests ..................................................................................................................... 337
Personal Protective Equipment — Eye Protection.......................................................................... 338
Cat Safety Glasses - Tread .................................................................................................. 338
Cat Safety Glasses - Dozer .................................................................................................. 338
Cat Safety Glasses - Track .................................................................................................. 339
Cat Safety Glasses - Mortar ................................................................................................ 339
Cat Safety Glasses - Grit ..................................................................................................... 340
Cat Safety Glasses - Guard.................................................................................................. 340
Cat Safety Glasses - Torque................................................................................................. 341
Wraparound Safety Glasses ................................................................................................ 341
Safety Glasses.................................................................................................................. 341
Safety Glasses.................................................................................................................. 342
Safety Glasses.................................................................................................................. 342
Safety Glasses.................................................................................................................. 342
Safety Glasses.................................................................................................................. 343
Safety Glasses.................................................................................................................. 343
Safety Glasses.................................................................................................................. 343
Safety Goggles ................................................................................................................. 345
Safety Goggles ................................................................................................................. 345
Lanyard for Safety Glasses.................................................................................................. 345

201
Shop Supplies
All-purpose Wipers............................................................................................................ 346
Lens Cleaning Towelettes.................................................................................................... 346
Lens Cleaning Station......................................................................................................... 346
Heavy-Duty Headgear ........................................................................................................ 347
Face Shield ...................................................................................................................... 347
Personal Protective Equipment — Hearing Protection .................................................................... 348
Disposable Ear Plugs ......................................................................................................... 348
Reusable Uncorded Ear Plugs.............................................................................................. 348
Disposable Foam Ear Plugs ................................................................................................. 348
Band Ear Plugs ................................................................................................................. 349
Silencer Ear Muffs............................................................................................................. 349
Multipositional Ear Muff ..................................................................................................... 349
Ear Muffs......................................................................................................................... 350
Personal Protective Equipment — Hard Hats ................................................................................ 351
Hard Hats ........................................................................................................................ 351
Hard Hat Winter Liner ........................................................................................................ 351
Personal Protective Equipment — Breathing Protection ................................................................. 352
Particulate Respirator ........................................................................................................ 352
Welding Respirator ............................................................................................................ 352
Dust Mask ....................................................................................................................... 353
Personal Protective Equipment — First Aid Kits ............................................................................ 354
Personal First Aid Kit - 150-1578 ........................................................................................... 354
Portable First Aid Kit - 150-1579 ............................................................................................ 355
Worksite First Aid Kits, 25 and 50-person ............................................................................... 356
First Aid Kit - 389-2195 ........................................................................................................ 357
Personal Protective Equipment — Welding Protection ................................................................... 358
Welding Helmet ................................................................................................................ 358
Welding Helmet ................................................................................................................ 358
Welding Goggles ............................................................................................................... 358
Welding Goggles with Lift Front Lens..................................................................................... 359
Welding Blanket................................................................................................................ 359
Contamination Control .............................................................................................................. 360
Engine Cover .................................................................................................................... 360
Seat Covers ..................................................................................................................... 360
Wall Mount Dispenser........................................................................................................ 360
Floor Cover ...................................................................................................................... 360
Cabinet Cover - 449-8227..................................................................................................... 361
Steering Wheel Covers....................................................................................................... 361
Dust Cap for 55 Gallon Drum................................................................................................ 361
Barrel Cover..................................................................................................................... 362
Zipper-Top, Clear Bags for Contamination Control .................................................................... 362
Fluid Sampling Equipment ......................................................................................................... 363
Fluid Sampling Extraction Tools for Pressurized Compartments................................................... 363
Fluid Sampling Extraction Tools for Non-Pressurized Compartments ............................................ 365
Oil Safe Containers ............................................................................................................ 366
Towels and Wipers .................................................................................................................. 368
DRC Quarter-Fold Wipers .................................................................................................... 368
DRC Pop-Up Shop Towels ................................................................................................... 368
DRC Center-Pull Roll Dry Shop Towels ................................................................................... 368
DRC Center - Pull Shop Towels............................................................................................. 369
DRC Jumbo Roll Shop Towels .............................................................................................. 369
All-Purpose Wipers ........................................................................................................... 369
Wipers ............................................................................................................................ 370
Low Lint Task Wipers ......................................................................................................... 370
Manufactured Rags ........................................................................................................... 370
Manufactured Pop-up Rags................................................................................................. 371

202
 Shop Supplies
Dispensers for Manufactured Rags and Paper Wipers.............................................................. 371
Hard Roll Towels ............................................................................................................... 371
Shop Towel ...................................................................................................................... 372
Absorbents and Spill Kits — Absorbents...................................................................................... 373
Oil Absorbent Pads ............................................................................................................ 373
Absorbent Socks............................................................................................................... 373
Absorbent Pillows ............................................................................................................. 374
Heavyweight Absorbent Material for Most Oil, Water-Based Fluids and Chemicals ........................ 375
Rip & Fit Absorbent Mat - 385-5560 ....................................................................................... 376
High-Visibility Absorbent Mat .............................................................................................. 376
Oil-Only Absorbent Material ................................................................................................ 377
Lightweight Absorbent Roll.................................................................................................. 378
Floor Dry - 4C-5751 ............................................................................................................ 378
Absorbents and Spill Kits — Spill Kits......................................................................................... 379
Sorbent Spill Kits............................................................................................................... 379
Small Spill Response Bag.................................................................................................... 380
Small Spill Response Cart ................................................................................................... 380
Small Spill Response Cart ................................................................................................... 381
Large Spill Response Kit ..................................................................................................... 382
Floor Mats.............................................................................................................................. 383
473-6461 Grippy Absorbent Traffic Floor Mat ........................................................................... 383
Rugs ............................................................................................................................... 383
WorkSafe Floor Mat........................................................................................................... 383
Rejuvenator Connect Modular Floor Mat................................................................................ 384
Weldsafe Floor Mat ........................................................................................................... 384
Clean Walk Mats............................................................................................................... 384
Tape ...................................................................................................................................... 385
General Purpose Masking Tape............................................................................................ 385
Masking Paper ................................................................................................................. 385
Masking Tape ................................................................................................................... 385
Label Protection Tape ........................................................................................................ 386
Filament Tape ................................................................................................................... 386
Filament Tape ................................................................................................................... 386
Transparent Tape .............................................................................................................. 387
Double-faced Tape ............................................................................................................ 387
Thread Seal Tape .............................................................................................................. 388
Duct Tape ........................................................................................................................ 388
High Performance Duct Tape ............................................................................................... 388
Electrical Tape.................................................................................................................. 389
Electrical Tape.................................................................................................................. 389
Aluminum Tape ................................................................................................................. 389
Box Sealing Tape Dispenser ................................................................................................ 390
Filament Tape Dispenser..................................................................................................... 390
Rubber Mastic Tape........................................................................................................... 390
Packing Supplies and Equipment................................................................................................ 391
Handwrappers .................................................................................................................. 391
Adjustable Stretch Band-it Tool............................................................................................ 391
Stretch Band-it Tool ........................................................................................................... 391
Stretch Band-it Stand......................................................................................................... 392
Heavy-Duty Master Wrap Film ............................................................................................. 392
Stretch Film...................................................................................................................... 392
Hand Wrap Standard-Duty Stretch Film ................................................................................. 393
Heat Shrink Bags .............................................................................................................. 393
Cardboard Boxes with Cat Logo ........................................................................................... 393
Heat Shrink Sheeting ......................................................................................................... 394
Maintenance Products Box ................................................................................................. 394

203
Shop Supplies
Plastic Bags with Cat Logo.................................................................................................. 394
High Performance Steel Strapping ........................................................................................ 395
Strapping Seals ................................................................................................................ 395
High Performance Nylon Cord Strapping................................................................................ 395
Shrinkfast Shrink Gun......................................................................................................... 396
Poly Coat Paper ................................................................................................................ 396
Electric Tie Strap Tightener ................................................................................................. 397
Label Maker Kit................................................................................................................. 397
Miscellaneous — Padlocks....................................................................................................... 398
Combination Padlock - 285-1145 ........................................................................................... 398
Combination Padlock - 285-1146 ........................................................................................... 398
High Security Brass Padlock - 285-1147 ................................................................................. 398
High Security Brass Padlock - 285-1148 ................................................................................. 398
High Security Brass Padlock - 285-1149 ................................................................................. 399
High Security Brass Padlock - 285-1150 ................................................................................. 399
Miscellaneous — Ladders ........................................................................................................ 400
Step Ladders and Shelf Ladders ........................................................................................... 400
Miscellaneous — Janitorial Products ......................................................................................... 401
Brooms ........................................................................................................................... 401
Janitorial Equipment .......................................................................................................... 401
Trash Can or Waste Receptacle Liners .................................................................................. 402
Heavy Duty Garbage Bags .................................................................................................. 402
Miscellaneous — Highway Warning Kit ...................................................................................... 403
Triangular Highway Warning Kit ........................................................................................... 403
Miscellaneous — Sprayers ....................................................................................................... 404
Reusable, Bulk-Liquid Sprayers............................................................................................ 404
Miscellaneous — Miscellaneous Products .................................................................................. 405
Poly Coat Paper ................................................................................................................ 405
Cable Ties and Applicators.................................................................................................. 405
Electric Tie Strap Tightener ................................................................................................. 406
Tyvek Coveralls ................................................................................................................. 406
Rain Jackets and Pants ...................................................................................................... 407
Paper Cups ...................................................................................................................... 408
Eye Loupe ........................................................................................................................ 408
Tie Down Straps................................................................................................................ 408
Black Wire....................................................................................................................... 408
Creeper ........................................................................................................................... 409
Funnel Kit ........................................................................................................................ 409
Funnel............................................................................................................................. 409
Sink Filter Sock Kit - 189-5637 .............................................................................................. 410
Digital Stopwatch - 386-3238................................................................................................ 410
Python Cinch Straps .......................................................................................................... 410
Plastic Cover – 463-5569 ..................................................................................................... 411
Paint — Cat Paint .................................................................................................................... 412
Cat Enamel Topcoats.......................................................................................................... 412
Cat Black Muffler Paint ...................................................................................................... 413
Cat Yellow Primer Paint ...................................................................................................... 413
Paints — Paint Thinner............................................................................................................. 414
Cat Paint and Primer Thinner ............................................................................................... 414
Cat Paint and Primer Thinner with Retarder ............................................................................ 414
Maintenance Chemicals — Soaps and Cleaners ........................................................................... 415
Windshield Cleaner ........................................................................................................... 415
Xtreme Windshield Washer Fluid.......................................................................................... 415
Plastic and Rubber Protectant ............................................................................................. 415
Seal Installation Kit............................................................................................................ 415
Air Filter Cleaning Kit ......................................................................................................... 416

204
 Shop Supplies
Cabinet Washers and Agitating Tanks ................................................................................... 416
Pressure Wash ................................................................................................................. 417
Defoamant and Descaleant/Conditioner ................................................................................. 417
General Purpose Detergents................................................................................................ 418
Chemtool LAC 110 All-Purpose Cleaner Concentrate................................................................. 418
Cat Orange Hand Cleaner.................................................................................................... 418
Cat Heavy-Duty Hand Cleaners ............................................................................................ 419
Cat Battery Cleaner ........................................................................................................... 419
Cat Battery Saver .............................................................................................................. 419
Cat Mineral Spirits............................................................................................................. 420
Maintenance Chemicals — Adhesives and Sealants...................................................................... 421
Clear Adhesive Sealant ...................................................................................................... 421
Heat Sink Compound.......................................................................................................... 421
High Temperature Anti-Seize ............................................................................................... 421
Cat Manifold Sealer ........................................................................................................... 421
Window Bonding Adhesives and Tooling................................................................................ 422
To Bond Large Windows ..................................................................................................... 422
Epoxy Adhesive, Nozzle Mixer, Applicator (Model 3500) ............................................................ 422
Maintenance Chemicals — Lubricants ........................................................................................ 423
CT2 Air Tool Oil/Lubricant.................................................................................................... 423
Cat Heavy Duty Penetrating Oil ............................................................................................ 423
Cat Dry Film Lubricant ........................................................................................................ 423
Cat Chain and Cable Lubricant ............................................................................................. 423
Cat Camshaft and Follower Lubricant .................................................................................... 424
Cat Silicone Lubricant ........................................................................................................ 424
Cat Air Conditioning Pump Lubricants—PAG Oil ...................................................................... 424
Rubber Lubricant............................................................................................................... 425
Cat P-80 Assembly Lubricant ............................................................................................... 425
Cat Tire Lubricant .............................................................................................................. 425
Maintenance Chemicals — Metal Working .................................................................................. 426
Cat 119 Cutting Oil ............................................................................................................. 426
Cat 250 Grinding Fluid......................................................................................................... 426
DYKEM Hi Spot Bluing Paste ............................................................................................... 426
Maintenance Chemicals — Testing Products................................................................................ 427
Oil Dyes........................................................................................................................... 427
Aerosol Liquid Penetrant and Developer ................................................................................ 427
UV Visible Dyes for Leak Detection ....................................................................................... 428
UV Flashlight Kit - 459-0184.................................................................................................. 429
Leak Detection Kit ............................................................................................................. 429
Cat Calibration Fluid........................................................................................................... 430
Gear Marking Compound - 381-0022 ...................................................................................... 430
Maintenance Chemicals — Rust Preventatives ............................................................................. 431
Cat Rust Preventive Oil 450.................................................................................................. 431
Cat Rust Preventive Oil 4A................................................................................................... 431
V.C.I. Oil........................................................................................................................... 431
Maintenance Chemicals — Miscellaneous Chemicals ................................................................... 432
Ether Cylinder ................................................................................................................... 432
CT2 Antifreeze and Rust Guard............................................................................................. 432
Anti-Spatter Compound ...................................................................................................... 432
Thermally Conductive RTV Kit .............................................................................................. 433
Cat Vacuum Pump Oil......................................................................................................... 433
UPS 250 Vacuum Pump Oil .................................................................................................. 433
Dielectric Tune-Up Grease .................................................................................................. 434
Cat Rust Preventative......................................................................................................... 434
Cat Silicone Fluid............................................................................................................... 434

205
Abrasives — Brushes
Radial Knot Brushes — Stringer Bead-Type Wheels
Warranty: Cat Standard Warranty, 6 Months
• Designed for heavy duty cleaning, scale, spatter and rust removal
• High quality oil tempered wire gives long life on pipe and plate weld cleaning

Part Package Arbor Hole (A.H) Max. Safe Free

Number Quantity Diameter Threaded Size Wire Size Speed (RPM)
1U-9957 1 76.2 mm (3 in) 9.5 mm (3/8 in) A.H. 0.36 mm 25,000
(0.014 in)

Bench Grinder Wire Brushes

Warranty: Cat Standard Warranty, 6 Months
• General purpose wire brushes that provide fine to medium brushing action
• Excellent for brushing uneven surfaces or areas not easily reached by wider
brushes
• Will remove light scale, dirt, rust, corrosion or light burrs

Part Package Max. Safe Free

Number Quantity Wheel Diameter Arbor Hole Wire Size Face Width Speed (RPM)
1U-9971 1 152.4 mm (6 in) 12.7 - 15.9 mm (1/2 - 5/8 in) 0.36 mm (0.014 in) 15.88 mm (5/8 in) 6,000
1U-9972 1 152.4 mm (6 in) 12.7 - 15.9 mm (1/2 - 5/8 in) 0.36 mm (0.014 in) 25.4 mm (1 in) 6,000
1U-9974 1 203.2 mm (8 in) 15.9 mm (5/8 in) 0.36 mm (0.014 in) 25.4 mm (1 in) 4,500

Cylinder Block Cleaning Brushes

Warranty: Manufacturer, 90 Day
• Used during rebuild to clean oil passages and cylinder bores after honing
• Circular brushes with nylon bristles and a single stem, single spiral, and carbon
steel wire handle

Part Number Brush Diameter Part Number Brush Diameter Part Number Brush Diameter
135-7628 304.8 mm (12 in) 6V-7092 15.9 mm (5/8 in) 1U-9788 127.0 mm (5 in)
1P-5571 9.5 mm (3/8 in) 6V-7093 25.4 mm (1 in) 4C-6344 139.7 mm (5 1/2 in)
1P-5572 19.1 mm (3/4 in) 6V-7094 38.1 mm (1 1/2 in) 4C-6345 152.4 mm (6 in)
1P-5573 31.8 mm (1 1/4 in) 6V-7095 44.5 mm (1 3/4 in) 4C-6346 165.1 mm (6 1/2 in)
1P-5574 127.0 mm (5 in) 6V-7096 50.8 mm (2 in) 4C-6347 177.8 mm (7 in)
6V-3182 7.9 mm (5/16 in) 4C-5552 57.2 mm (2 1/4 in) 4C-6348 190.5 mm (7 1/2 in)
6V-3183 11.1 mm (7/16 in) 4C-6342 88.9 mm (3 1/2 in) 4C-6349 203.2 mm (8 in)
6V-7067 6.4 mm (1/4 in) 4C-6343 101.6 mm (4 in) 4C-6350 241.3 mm (9 1/2 in)
6V-7091 12.7 mm (1/2 in) 1U-7429 114.3 mm (4 1/2 in)

206
 Abrasives — Brushes
Interleaf Flap Brush
Warranty: Manufacturer, 120 Day
• Non-woven surface conditioning material and aluminum-oxide abrasive flaps with
cloth backing
• Epoxy filled center with 6.4 mm (.25 in) shank
• Used to clean curved and irregular shaped parts with hard to reach areas
• Use in place of wire wheels, hand scrapers, and wire brushes
• Typical applications include cleaning up both hydraulic cylinders and engine low-
er bores
• Can also be used to clean rust, carbon deposits, adhesives, and tough coatings

Part Number Size Grade Grit Part Number Size Grade Grit
254-5310 38 x 25 mm (1.5 x 1 in) Coarse 60 254-5313 76 x 51 mm (3 x 2 in) Coarse 60
254-5311 38 x 25 mm (1.5 x 1 in) Medium 120 254-5314 76 x 51 mm (3 x 2 in) Medium 120
254-5312 38 x 25 mm (1.5 x 1 in) Very Fine 240 254-5315 76 x 51 mm (3 x 2 in) Very Fine 240

Crimped End Wire Brushes

Warranty: Manufacturer, 120 Day
• Steel Wire
• 1/4 inch shank
• End brushes are suitable for operation over a wide range of speeds to accommo-
date various jobs. At a moderate RPM the wires maintain a general end position
for tip action. Higher speeds cause flaring action which can be beneficial in con-
forming to irregular shapes and contours.
• Used to clean large metal surfaces
• Remove burrs, weld scale, and rust
• Good for edge blending and surface preparation

Part Number Description Gauge Size Dimensions Quantity RPM

4C-6157 Encapsulated Flair-Flex .010 1 1/2 in (38 mm) – 1 25,000
262-9721 Straight Wire .006 1/2 in (13 mm) – 1 Box of 10 22,000
262-9722 Straight Wire .006 3/4 in (19 mm) 76 x 63.5 mm (3 x 2 1/2 in) 1 Box of 10 22,000
262-9723 Straight Wire .006 1 in (25 mm) 76 x 63.5 mm (3 x 2 1/2 in) 1 Box of 10 22,000
262-9726 Straight Wire .020 1/2 in (13 mm) 76 x 63.5 mm (3 x 2 1/2 in) 1 Box of 10 22,000
262-9727 Straight Wire .020 3/4 in (19 mm) 76 x 63.5 mm (3 x 2 1/2 in) 1 Box of 10 20,000
1U-9939 Knot .020 1 in (25 mm) – 1 20,000
1U-9940 Straight Wire .020 1 in (25 mm) – – 20,000
1U-9941 Straight Wire .020 3/4 in (19 mm) – – 20,000
1U-9942 Circular End .020 1 1/2 in (38 mm) – 1 15,000
1U-9943 Knot .020 3/4 in (19 mm) – 1 20,000
1U-9945 Galvanized .020 3 in (76 mm) – – 5,000
1U-9946 Galvanized .014 3 in (76 mm) – – 5,000
4C-6153 Straight Wire .010 1 in (25 mm) – – 20,000
4C-6154 Straight Wire .010 1 in (25 mm) – – 20,000

207
Abrasives — Brushes
Crimped End Wire Brushes (Cont'd.)
Part Number Description Gauge Size Dimensions Quantity RPM
4C-6158 Knot .014 1 in (25 mm) – 1 20,000
262-9728 Straight Wire .020 1 in (25 mm) 76 x 63.5 mm (3 x 2 1/2 in) 1 Box of 10 –
262-9729 Knot .014 3/4 in (19 mm) 76 x 63.5 mm (3 x 2 1/2 in) 1 Box of 10 –

Cup End Wire Brushes

Warranty: Manufacturer, 120 Day
• 5/8 - 11 Thread
• Used to clean large metal surfaces
• Remove burrs, weld scale, and rust
• Good for edge blending and surface preparation
• Steel Wire

Part Package Max.

Number Description Gauge Size Dimensions Quantity Speed (RPM)
262-9720 Knot Double Row .023 6 in (152 mm) 76 mm x 152 mm (3 in x 6 in) – 6,000
262-9724 Straight Wire .014 6 in (152 mm) 76 mm x 152 mm (3 in x 6 in) 1 Box of 10 6,000
262-9725 Single Knot Row .014 6 in (152 mm) 76 mm x 152 mm (3 in x 6 in) – 6,000

Stem Mount Wire Brushes

Warranty: Manufacturer, 120 Day
• Steel Wire
• 1/4 inch shank
• Used to clean metal surfaces
• Remove burrs, weld scale, and rust
• Good for edge blending and surface preparation

Part Number Wire Gauge Size Package Quantity Max. Speed (RPM)
249-5284 .010 1 1/2 in (38 mm) – 25,000
249-5285 .011 2 in (52 mm) – 25,000
249-5286 .011 2 1/2 in (64 mm) – 25,000

208
 Abrasives — Discs
Type 29 Zirconium Flap Discs
Warranty: Manufacturer, 120 Day
• Grind and finish in one operation—good for heavy stock removal as well as finish-
ing—reduces downtime
• Unique design allows for consistent sharp edge as wheel wears away
• Has a built-in angle for less operator fatigue
• Fiberglass reinforced backer
• Long lasting Zirconium grain cloth-backed flaps

Part Number Center Hole Diameter Grade Package Quantity

236-8105 22.23 mm (7/8 in) 114.3 mm (4 1/2 in) ZIR24 10
236-8106 22.23 mm (7/8 in) 114.3 mm (4 1/2 in) ZIR36 10
236-8107 22.23 mm (7/8 in) 114.3 mm (4 1/2 in) ZIR60 10
236-8109 22.23 mm (7/8 in) 114.3 mm (4 1/2 in) ZIR80 10
236-8111 22.23 mm (7/8 in) 114.3 mm (4 1/2 in) ZIR120 10
236-8114 22.23 mm (7/8 in) 152.4 mm (6 in) ZIR60 10
236-8116 22.23 mm (7/8 in) 152.4 mm (6 in) ZIR120 10
254-5336 22.23 mm (7/8 in) 178 mm (7 in) ZIR36 10
254-5337 22.23 mm (7/8 in) 178 mm (7 in) ZIR60 10
254-5338 22.23 mm (7/8 in) 178 mm (7 in) ZIR80 10

Type 29 Zirconium Flap Disc with 5/8 -11 Hub

Warranty: Manufacturer, 120 Day
• Long lasting Zirconium cloth backed flaps
• Fiberglass reinforced backer
• Three popular grades
• Grind and finish in one operation
• Permanently attached metal hub

Part Number Diameter Hub Thread Grade Package Quantity

254-5339 144 mm (4.5 in) 5/8 -11 36G 10
254-5340 144 mm (4.5 in) 5/8 -11 60G 10
254-5341 144 mm (4.5 in) 5/8 -11 80G 10
254-5342 178 mm (7 in) 5/8 -11 36G 10

209
Abrasives — Discs
Hi-Density Zirconium Flap Disc with 5/8 -11 Hub
Warranty: Manufacturer, 120 Day
• Hi-density flap disc with 5/8 -11 permanently attached metal hub
• Good for stock removal as well as finishing
• Fiberglass reinforced backer
• Available in four popular grades
• Made with long-life Zirconium grain
• 35 - 50% more material than Standard Flap discs

Part Number O.D. Hub Thread Grade Package Quantity

254-5345 114 mm (4.5 in) 5/8 -11 36 grit 10
254-5346 114 mm (4.5 in) 5/8 -11 60 grit 10
254-5347 114 mm (4.5 in) 5/8 -11 80 grit 10
254-5348 114 mm (4.5 in) 5/8 -11 120 grit 10
254-5349 178 mm (7 in) 5/8 -11 36 grit 10
254-5350 178 mm (7 in) 5/8 -11 60 grit 10
254-5351 178 mm (7 in) 5/8 -11 80 grit 10

Aluminum Oxide Surface Reconditioning Discs

Warranty: Manufacturer, 120 Day
Conditioning surfaces with conventional abrasive discs often results in dimensioning,
gouging, or undercutting. Wire brushes don't thoroughly remove contaminants which
can lead to rework. Their wires can become loose, fly off, and injure an operator. Sur-
face reconditioning discs can help reduce or eliminate these problems. They deliver
superior, consistent finishes when you need to clean, deburr, blend or finish.
• Use disc coming off the edge—better finish results
• Aluminum Oxide
• Use for gasket removal
• Use for deburring, cleaning and rust removal
• Use instead of wire brushes or sand paper when you don't want to remove any
stock
Part Package Maximum Operating Speed Optimum Operating Speed
Number Quantity Grade Diameter (RPM) (RPM) Backing Pad
1U-7622 25 A-Coarse 101.6 mm (4 in) 13,000 10,000 4C-4763 (13,000),
1U-7623 (18,000)
4C-4383 50 A-Coarse 50.8 mm (2 in) 25,000 18,000 4C-4381
4C-4384 25 A-Coarse 76.2 mm (3 in) 18,000 15,000 4C-4382
5P-9709 25 A-Coarse 177.8 mm (7 in) 6,000 4,500 5P-9718
6V-0185 25 A-Coarse 127.0 mm (5 in) 10,000 10,000 6V-0186

210
 Abrasives — Discs
Surface Reconditioning Discs — Superior Edge Wear
Warranty: Manufacturer, 120 Day
• Surface reconditioning disc used on right angle tools
• The edges of an abrasive on a right angle grinder tend to wear faster than the
center and thus the disc is never fully used up. Superior edge wear discs have
longer overall life than standard discs.
• Ideal for gasket removal, rust removal and general cleaning on steel parts
• Retained by hook and loop type fasteners or 7/8 inch bolt thru application
• Brown disc with gray backing
Package Maximum Operating Optimum Operating
Part Number Quantity Description Diameter Speed (RPM) Speed Associated Tool
9U-6921 10 SE Disc — A 177.8 mm (7 in) 6,000 4,500 Grinder
Coarse
9U-6922 10 SE Disc — A 127.0 mm (5 in) 10,000 10,000 Grinder
Coarse
9U-6923 10 SE Disc — A 127.0 x 22.23 mm center hole (5 x 7/8 in) 10,000 10,000 Grinder
Coarse
9U-6924 10 SE Disc — A 101.6 mm (4 in) 13,000(1) 10,000 Grinder/ Hand
Coarse Drill
9U-6925 10 SE Disc — A 101.6 x 22.23 mm center hole (4 x 7/8 in) 13,000 10,000 Grinder/ Hand
Coarse Drill
9U-6926 10 Roloc — A 76.2 mm (3 in) 18,000 15,000 Die Grinder/
Coarse Hand Drill
9U-6927 10 Roloc — A 50.8 mm (2 in) 25,000 21,000 Die Grinder/
Coarse Hand Drill

Disc Pad Holders

Warranty: Manufacturer, 120 Day
Safety Tip
Place holder on table before turning tool on—prevents pad from flying off.

Maximum
Part Package Operating Speed
Number Quantity Used With Description Diameter Hub/Shank (RPM)
1U-5518 1 1U-5519 or Replacement Threaded – – –
1U-5520 Shaft
1U-5519 1 9U-6927 R - type Holder 51.0 mm (2 in) – 25,000
1U-5520 1 9U-6926 R - type Holder 76.2 mm (3 in) – 20,000
1U-7623 – 1U-7622 Hook and Loop 101.6 mm (4 in) 6.35 mm shaft (1/4 in) 13,000
4C-4381 – 4C-4383 Hook and Loop 51.0 mm (2 in) 6.35 mm shaft (1/4 in) 25,000
4C-4382 – 4C-4384 Hook and Loop 76.2 mm (3 in) 6.35 mm shaft (1/4 in) 18,000
4C-4763 – 1U-7622 Pad Holder 101.6 mm (4 in) M14 x 2 13,000
4C-4764 – 1U-7622 Hook and Loop 101.6 mm (4 in) 5/8 in-11 13,000

1 Maximum speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter

211
Abrasives — Discs
Disc Pad Holders (Cont'd.)
Maximum
Part Package Operating Speed
Number Quantity Used With Description Diameter Hub/Shank (RPM)
5P-9718 – 5P-9709 Pad Holder 177.8 mm (7 in) 5/8 in-11 6,000
6V-0186(2) – 150-1244 Pad Holder 127.0 mm (5 in) 5/8 in-11 10,000

Roloc Surface Conditioning Discs

Warranty: Manufacturer, 120 Day
• Uses a more positive retention method than the "hook and loop" fasteners system
• R-style discs have a quarter turn male fastener embedded into the disc. The disc
holder has the corresponding female fastener.
• Typically used at smaller sizes where the higher maximum operating speed re-
quires a more positive retention system
• The disadvantage of this system is that the surface conditioning operation must
always be conducted in one direction only. Reversing the tool will "unspin" the
disc from the holder.
• Aluminum oxide
• Use for gasket removal, deburring, cleaning, and rust removal
• Use instead of wire brushes or sand paper when you don't want to remove any
stock
Package Maximum Operating Optimum Operating
Part Number Quantity Diameter Speed (RPM) Speed (RPM) Used With
R - type Surface Conditioning Discs
1U-5516 25 50.8 mm (2 in) 25,000 18,000 1U-5519
9U-6927 10 50.8 mm (2 in) 25,000 21,000 1U-5519
9U-6926 10 76.2 mm (3 in) 18,000 15,000 1U-5520
1U-5517 25 76.2 mm (3 in) 18,000 15,000 1U-5520
R - type Disc Holders
1U-5518 1 6.4 mm (1/4 in) – – 1U-5520 or 1U-5519
1U-5519 1 50.8 mm (2 in) 25,000 21,000 1U-5518
1U-5520 1 76.2 mm (3 in) 15,000 15,000 1U-5518

2 Female, 5/8 in - 11; use 1U-9381 to adapt it.

212
 Abrasives — Discs
Surface Reconditioning Discs for Aluminum Surfaces
Warranty: Manufacturer, 120 Day
• The ideal disc for aluminum
• Uses the same holders and grinders as other surface reconditioning discs
Fine Grade
• Very fine grade minimizes the chance of changing the surface profile
• Identified by blue/green color both front and back of disc
Medium Grade
• Medium grade material used much like coarse but is less aggressive in perform-
ance—used when very fine surface condition material is not quite aggressive
enough
• Ideal for work requiring less pressure such as grind marks, surface rust, and mild
coatings
• Brown disc with gray backing

Maximum Optimum
Part Package Operating Operating Actual Max. Hub/
Number Qty. Grade Diameter Speed (RPM) Speed (RPM) Used With Qty. Diameter Shank Associated Tool
150-1197 10 A Fine, N.H. 177.8 mm (7 in) 6,000 4,500 – – – – Grinder
150-1244 10 A Fine, N.H. 127.0 mm (5 in) 10,000 10,000 – – – – Grinder
150-1246 10 A Fine 101.6 mm (4 in) 13,000(3) 10,000 – – – – Grinder/ Hand
Drill
150-1248 10 A Fine 76.2 mm (3 in) 18,000 15,000 – – – – Die Grinder/
Hand Drill
150-1250 10 A Fine 50.8 mm (2 in) 25,000 21,000 – – – – Die Grinder/
Hand Drill
236-8092 25 Medium 76.2 mm (3 in) 18,000 rpm 15,000 rpm – – – – Grinder
Holders
1U-5519 1 R - type Holder 51.0 mm (2 in) 25,000 21,000 150-1250 1 44.45 mm – Die Grinder,
(1 3/4 in) Hand Drill
1U-5520 1 R - type Holder 76.2 mm (3 in) 20,000 15,000 150-1248 1 69.85 mm – Die Grinder,
(2 3/4 in) Hand Drill
1U-7623 – Hook and Loop 101.6 mm (4 in) 13,000 10,000 150-1246 1 98.43 mm 1/4 in –
(3 7/8 in) Shaft
4C-4381 – Hook and Loop 51.0 mm (2 in) 25,000 21,000 150-1251 1 44.45 mm – –
(1 3/4 in)
4C-4382 – Hook and Loop 76.2 mm (3 in) 18,000 15,000 150-1252 1 78.03 mm – –
(2 7.8 in)
4C-4763 – Pad Holder 101.6 mm (4 in) 13,000 10,000 150-1246 1 95.25 mm M14 x 2 –
(3 3/4 in)
4C-4764 – Hook and Loop 101.6 mm (4 in) 13,000 10,000 150-1246 1 95.25 mm 5/8 in-11 –
(3 3/4 in)
5P-9718 – Pad Holder 177.8 mm (7 in) 6,000 4,500 150-1197 1 174.63 mm 5/8 in-11 –
(6 7/8 in)
6V-0186(4) – Pad Holder 127.0 mm (5 in) 10,000 10,000 – 1 120.65 mm 5/8 in-11 –
(4 3/4 in)

3 Maximum speed is 13,000 if used with 4C-4763, (4C-4764, 155-3595)

4 Female, 5/8 in-11; use 1U-9381 to adapt it.

213
Abrasives — Discs
Aluminum Oxide Discs
Warranty: Manufacturer, 120 Day
• Flexible discs can be used to remove corrosion and surface deposits
• Clean/strip designation indicates a coarse version of cutting/polishing disc
• Typical applications are clean up of hydraulic cylinders and engine lower bores
• Can be used in stacks of two or three, for whatever width is required to clean the
surface in the most efficient manner
• Aluminum oxide
• Use for gasket removal, deburring, cleaning, and rust removal
• Use instead of wire brushes or sand paper when you don't want to remove any
stock
• 279-2267 material is more aggressive so has a better cleaning and polishing effect
than 6V-4086
Maximum Operating Optimum Operating
Part Number Package Quantity Grade Diameter Speed (RPM) Speed (RPM)
279-2267 1 A-Medium 152.4 x 6.35 mm (6 x 1/4 in) 4,000 3,200
4C-3868 1 Extra Coarse 101.6 x 6.35 mm (4 x 1/4 in) 6,000 4,500
6V-4086 1 A-Medium 152.4 x 6.35 mm (6 x 1/4 in) 4,000 3,200
8T-3054 1 Coarse 152.4 x 12.7 mm (6 x 1/2 in) 4,000 3,200

Surface Reconditioning Discs — Bolt-On Style

Warranty: Manufacturer, 120 Day
• Holders for these discs have a hook and loop type fastening system; not all the
grinders in the shop will accept this kind of holder

Package Maximum Operating Speed Optimum Operating Associated

Part Number Quantity Description Diameter x Center Hole (RPM) Speed (RPM) Tool
9U-6928 10 Disc — A Coarse 127.0 x 22.23 mm (5 x 7/8 in) 10,000 10,000 Grinder
9U-6929 10 Disc — A Coarse 101.6 x 22.23 mm (4 x 7/8 in) 13,000 10,000 Grinder

214
 Abrasives — Discs
Roloc Holders and Threaded Shaft Bristle Discs
Warranty: Cat Standard Warranty, 6 Months
• Bristle design and 3-dimensional abrasives enable bristle discs to remove carbon
buildup, coatings, sealants, gaskets and weld discoloration quickly, leaving a clean
surface ready for subsequent operations or inspection
• Used with rotary tool such as drill or small angle grinder
• Designed to compete with crimped wire and bristle cup brushes
• Extends range of surface reconditioning operations where conformability and flex-
ibility are most critical
• Provides exceptional finish, outstanding performance and a safer workplace by
eliminating flying metal wires
• Come in 3 sizes and 3 grades
• All Roloc holders use 1U-5518 Threaded Shaft
Specifications
Shaft size 6.4 mm (.25 in)
Disc package quantity 10
50 grit discs carbon removal, weld discoloration clean up or where coating removal discs are
used
80 grit discs corrosion removal, sealant removal and general maintenance repair operations
120 grit discs aluminum parts

Maximum Optimum
Package Operating Operating
Item Part Number Description Diameter Size Quantity Grit Color Speed (RPM) Speed
Roloc Bristle Discs
1 138-4523 Roloc Bristle Disc 25 mm (1.0 in) 1 10 50 Green 30,000 25,000
1 138-4524 Roloc Bristle Disc 25 mm (1.0 in) 1 10 80 Yellow 30,000 25,000
1 138-4528 Roloc Bristle Disc 51 mm (2.0 in) 2 10 50 Green 25,000 18,000
1 138-4529 Roloc Bristle Disc 51 mm (2.0 in) 2 10 80 Yellow 25,000 18,000
1 138-4530 Roloc Bristle Disc 51 mm (2.0 in) 2 10 120 White 25,000 18,000
1 138-4534 Roloc Bristle Disc 76 mm (3.0 in) 3 10 50 Green 20,000 15,000
1 138-4535 Roloc Bristle Disc 76 mm (3.0 in) 3 10 80 Yellow 20,000 15,000
1 138-4536 Roloc Bristle Disc 76 mm (3.0 in) 3 10 120 White 20,000 15,000
1 150-5431 2” Holder Medium(5) 51 mm (2.0 in) – – – – – –
1 151-8101 Roloc Bristle Disc 25 mm (1.0 in) 1 10 120 White 30,000 25,000
2 151-8102 Holder for Bristle Discs 25 mm (1.0 in) – – – – – –
2 1U-5519 R - type Holder 51 mm (2.0 in) – 1 – – 25,000 21,000
2 1U-5520 R - type Holder 76 mm (3.0 in) – 1 – – 15,000 15,000
3 1U-5518 Replacement Threaded Shaft – – 1 – – – –

5 Warranty: Manufacturer, 120 Day

215
Abrasives — Discs
Aluminum Oxide Fiber Discs
Warranty: Manufacturer, 120 Day
• Requires use with rib-flow backing pad noted in table below
• Aluminum oxide with resin fiber back
• 22 mm (7/8 in) center hole for use with 5/8 -11 arbor (except 236-8069 which has 16
mm (5/8 in) center hole)
• Resin bond with fiber backing for strength
• Used for medium and heavy stock removal on right-angle sanding equipment for:
– Cutting down and blending weld lines
– Cutting down filler metal, rust and scale removal, as well as deburring

Part Number Grit Pad Diameter Package Quantity Backing Pad

7/8 inch Arbor Hole
1U-6827 24 114 mm (4 1/2 in) 25 254-5307
1U-6828 36 114 mm (4 1/2 in) 25 254-5307
1U-6829 50 114 mm (4 1/2 in) 25 254-5307
1U-6832 100 114 mm (4 1/2 in) 25 254-5307
1U-6834 24 127.0 mm (5 in) 25 254-5308
1U-6835 36 127.0 mm (5 in) 25 254-5308
1U-6836 50 127.0 mm (5 in) 25 254-5308
1U-6837 60 127.0 mm (5 in) 25 254-5308
1U-6838 80 127.0 mm (5 in) 25 254-5308
1U-6839 100 127.0 mm (5 in) 25 254-5308
1U-6841 24 178.0 mm (7 1/64 in) 25 254-5309
1U-6842 36 178.0 mm (7 1/64 in) 25 254-5309
1U-6843 50 178.0 mm (7 1/64 in) 25 254-5309
1U-6844 60 178.0 mm (7 1/64 in) 25 254-5309
1U-6846 100 178.0 mm (7 1/64 in) 25 254-5309
268-8709 16 114.0 mm (4 31/64 in) 25 254-5307

216
 Abrasives — Discs
Bristle Discs
Warranty: Cat Standard Warranty, 6 Months
• Bristle design and 3-dimensional abrasive filled fingers enable bristle disc to re-
move carbon buildup, coatings, sealants, gaskets, and weld discoloration quickly,
leaving a clean surface ready for subsequent operations or inspection
• Used with rotary tool such as drill or right angle grinder
• Used for coating removal, weld preparation, and general cleaning
• Increased safety during use—bristles are mounted securely to backing, virtually
eliminating flying wires common with wire brushes
• Flexible, abrasive-filled bristles conform to part's surface and clean without re-
moving base material, helping reduce damage and rework
• Unique bristle shape resists excessive edge wear and loading with coatings, dirt,
and debris to extend disc life and performance
• Resists heat build-up to reduce potential tempering or work surface damage
• Threaded 5/8 -11 inch core quickly threads onto shaft of an electric or pneumatic
right angle grinder
• Color coding makes abrasive grade selection quick and easy

Internal thread: 5/8 -11

Part Number Size Grit Color Maximum Operating Speed (RPM) Optimum Operating Speed Application
165-3945 4 1/2 50 Green 12,000 10,000 Carbon removal, weld discoloration
cleaning, coating removal
165-3946 4 1/2 80 Yellow 12,000 10,000 Corrosion removal, sealant removal,
general maintenance repair operations
165-3947 4 1/2 120 White 12,000 10,000 Aluminum parts

Rib-flow Backing Pads for Fiber Disc

Warranty: Manufacturer, 120 Day
• Rib-flow backing pads allow air flow through the ribs extending disc life from 20
to 50%
• Polymide construction with steel insert and arbor nut
• Shipped in poly bag with 5/8 -11 arbor flange nut
• Available in three popular diameters
• For use with angle grinders with a 5/8 -11 spindle thread
• 254-5309 will fit 222-3064 or 222-3065 Pneumatic Angle Grinders

Part Number O.D. Max. Speed (RPM) Package Quantity

254-5307 114.3 mm (4.5 in) 13,000 1
254-5308 127.0 mm (5 in) 11,900 1
254-5309 177.8 mm (7 in) 8,600 1

217
Abrasives — Discs
R - Type Mini Grinding Discs
Warranty: Manufacturer, 120 Day
• Aluminum oxide with resin fiber back
• Manufactured with non-carcinogenic bonding agents—safer for the environment
and dissipate heat while providing cooler cut for longer product life
• More coarse grits (24/36) best for weld removal, grinding, and deburring
• 50 grit best for blending; finer grits best for smooth sanding
• Resists stretching, shedding, and grain loss
• Maintains flexibility to work in contours
• Use with 1U-5519, 150-5431, and 1U-5520 R-Type Disc Holders

Part Number Diameter Grit Package Quantity

236-8072 50.8 mm (2 in) 24 50
236-8073 50.8 mm (2 in) 36 50
236-8074 50.8 mm (2 in) 50 50
236-8075 50.8 mm (2 in) 80 50
236-8076 50.8 mm (2 in) 120 50
236-8078 76.2 mm (3 in) 24 25
236-8079 76.2 mm (3 in) 36 25
236-8081 76.2 mm (3 in) 50 25
236-8082 76.2 mm (3 in) 80 25
236-8083 76.2 mm (3 in) 120 25

Discs
Warranty: Manufacturer, 120 Day
• Excellent for cleaning welds, removing tough coatings, carbon deposits, adhe-
sives and rust
• Conformable so there is less chance of under-cutting or gouging
• Open web resists loading even from soft coatings and is non-metallic so it will
not contaminate the surface with metallic residues
• Will work at low RPM's, such as on a 6.35 mm (1/4 in) drill @ 1750 RPM
• Works well on other substrates such as wood, aluminum and even plastic

Maximum Optimum
Part Package Operating Operating
Number Quantity Description Diameter Speed (RPM) Speed Associated Tool
4C-8637 1 Clean 'N Strip 6.35 mm (1/4 in) Spindle 101.6 x 12.7 x 6.35 mm (4 x 8,000 8,000 Straight Grinder and
Mounted Disc (CSD1-S) 1/2 x 1/4 in) Hand Drill
4C-8638 1 Clean 'N Strip 6.35 mm (1/4 in) Spindle 101.6 x 25.4 x 6.35 mm (4 x 8,000 8,000 Straight Grinder and
Mounted Disc (CSD2-S) 1 x 1/4 in) Hand Drill

218
 Abrasives — Discs
PSA Stick-It Discs
Warranty: Manufacturer, 120 Day
• Aluminum oxide, resin bond adhesive backed paper discs
• Special coating resists loading
• Paper weight: E
• Color: gold
• Material: aluminum oxide

Part Number Size Weight Grit Qty.

262-9736 127 mm (5 in) E 40 100 per box

PSA Discs, Glue Backed, PSA/No Hole

Warranty: Manufacturer, 120 Day
• These discs have glue on the back and are used with backing pads to deburr,
blend, etc.
• Pressure sensitive adhesive on disc back makes changes fast and easy
• Efficient on flat and contoured metal surfaces and hard to reach areas

Part Number Grit Description Diameter x Hole Package Quantity

4C-3809 36 Cloth Backed Disc 50.8 mm (2 in) 50
4C-3811 60 Cloth Backed Disc 50.8 mm (2 in) 50
4C-3813 100 Cloth Backed Disc 50.8 mm (2 in) 50
4C-3821 100 Cloth Backed Disc 101.6 mm (4 in) 50
4C-3822 120 Cloth Backed Disc 101.6 mm (4 in) 50
4C-3834 80 Cloth Backed Disk 304.8 mm (12 in) 25

PSA Sanding Discs

Warranty: Manufacturer, 120 Day
• Ideally used on dual action (DA) air and electrical random orbit sanders
• Used on metal, plastic, fiberglass, wood, and painted surfaces
• Anti-clog release agents are an additive process for long life
• Quality full resin-over-resin bond
• Each disc has protective backing to protect the adhesive in dusty environments
before use
• Priced per roll

Part Number Diameter Grit Package Quantity Part Number Diameter Grit Package Quantity
236-8041 127 mm (5 in) A/O 100 100 236-8051 152.4 mm (6 in) A/O 120 100
236-8043 127 mm (5 in) A/O 150 100 236-8052 152.4 mm (6 in) A/O 150 100
236-8048 152.4 mm (6 in) A/O 60 100 236-8053 152.4 mm (6 in) A/O 180 100
236-8049 152.4 mm (6 in) A/O 80 100 236-8054 152.4 mm (6 in) A/O 220 100

219
Abrasives — Discs
PSA Sanding Discs (Cont'd.)
Part Number Diameter Grit Package Quantity Part Number Diameter Grit Package Quantity
236-8055 152.4 mm (6 in) A/O 320 100 236-8056 152.4 mm (6 in) A/O 400 100

Hook and Loop Aluminum Oxide Film Back Sanding Discs

Warranty: Manufacturer, 120 Day
• Extremely tear resistant
• Resists loading on metal, paint and wood surfaces
• Strong backing
• Use with hook and loop sanding pads
• Material: aluminum oxide, film back resin bond
• Color: blue

Part Number Diameter Grit Package Quantity

281-8271 127 mm (5 in) 100 50
281-8272 127 mm (5 in) 180 50
281-8273 152.4 mm (6 in) 100 50
281-8274 152.4 mm (6 in) 180 50
281-8275 152.4 mm (6 in) 220 50
281-8282 203.2 mm (8 in) 80 50

Hook and Loop Sanding Pads

Warranty: Manufacturer, 120 Day
• Molded hook and loop sanding pad with plastic hub
• Use with hook and loop sanding discs

Part Number Diameter Size Max. Speed (RPM)

275-5265 152.4 mm (6 in) 5/16 -24 10,000
275-5266 203.2 mm (8 in) 5/8 -11 4800

220
 Abrasives — Wheels
Clean 'N Strip Silicon Carbide Unitized Wheels
Warranty: Manufacturer, 30 Day
• Constructed of the most advanced material, Clean 'N Strip Unitized Wheels meet
the demand for aggressive and durable cleaning products
• Designed to compete with power tool wire brushing, this product provides a
cleaner, burr-free surface quicker than any wire fiber product
• Constructed of a non-woven nylon web, there is no opportunity for metal contami-
nation or rusting in this product. It can be used on a variety of ferrous and non-
ferrous metal surfaces
• Used extensively in weld cleaning and conditioning applications to provide the
proper surfaces for high integrity welding and cleaned polish surfaces for non-
destructive testing
• Use this product for heavy-duty cleaning of rust, corrosion and coatings of all
types
• Use for gasket removal, deburring, cleaning, and rust removal
• Clean up to 4 times faster than wire brushes, runs smoothly and resists loading
• Use instead of wire brushes or sand paper when you don't want to remove any
stock
Specifications
Density 7
Mineral type S
Color Black
Grade XCS

Part Package Maximum Operating Optimum Operating

Number Quantity Wheel Size Hole Size Speed (RPM) Speed Used with
Clean 'N Strip Unitized Wheels
8T-7769 40 38.1 x 25.4 mm 4.8 mm 18,000 16,000 Die Grinder with 8T-
(1 1/2 in x 1 in) (3/16 in) 7768

Light Silicon Carbide Deburring Wheel

Warranty: Manufacturer, 30 Day
• Widely used for fine deburring and polishing applications
• Designed to allow for removal of burrs without changing the dimension of the
workpiece
• An excellent blending and radiusing tool
• Used in a variety of hand and automatic deburring and finishing applications in-
cluding centerless polishing

Specifications
Density 6
Mineral type S
Color Gray
Grade Fine

221
Abrasives — Wheels
Light Silicon Carbide Deburring Wheel (Cont'd.)
Specifications
6V-2032 Adapter
Maximum operating speed 4,000
Number required 2

Maximum Optimum
Package Operating Operating
Part Number Quantity Description Wheel Size Hole Size Speed (RPM) Speed Used with
8T-7748 3 Light Deburring Wheel 203.2 x 25.4 mm (8 in x 1 in) 76.2 mm (3 in) 4,500 4,500 Bench and
Stand Grinder

Type 27 High Performance Zirconium Grinding Wheels

Warranty: Manufacturer, 120 Day
• Ideal for the toughest applications
• Provides extremely long life
• High performance Zirconium offers very fast stock removal and longer life
• Cool running
• Smoother, more consistent performance for operator
• Best choice for stainless, castings, welding seams, and hard metal grinding

Part Package
Number Size Grade Quantity
236-8070 100 mm x 6 mm x 9.53 mm (4 in x 1/4 in x 3/8 in) 4997, ZG 50
236-8071 100 mm x 6 mm x 15.88 mm (4 in x 1/4 in x 5/8 in) 4997, ZG 50
237-3653 100 mm x 6 mm x 22.23 mm (4 1/2 in x 1/4 in x 7/8 in) 4997, ZG 50

Type 27 Aluminum Oxide 4 inch Grinding Wheel

Warranty: Manufacturer, 120 Day
• Designed for grinding applications on ferrous metal such as grinding/smoothing
weld seams and cleaning/shaping metal surfaces
• Material: aluminum oxide and resin
Max.
Part Speed
Number Size Type Grade (RPM)
262-9738 101.6 x 6.35 x 9.53 mm (4 x 1/4 x 3/8 in) hole 27 A24 15,000

222
 Abrasives — Wheels
Finishing Flap Aluminum Oxide Brush Wheel
Warranty: Cat Standard Warranty, 6 Months
• Fine grade flap brush replaces fine wire power brushes for removing carbon
buildup, light rust and corrosion

Specifications
Density 5
Color Maroon
Grade Fine

Maximum Optimum
Package Operating Operating
Part Number Quantity Wheel Size Hole Size Speed (RPM) Speed Typical Application
6V-2033 2 203.2 x 50.8 mm (8 in x 2 in) 76.2 mm (3 in) 4,000 3,200 Bench Grinder, Stand Grinders,
Straight Grinders
Mandrel
6V-2032 – – – – – –

Level Cut Aluminum Oxide Unitized Wheel

Warranty: Manufacturer, 30 Day
• Made from an advanced material
• An excellent blending and polishing tool
• Used frequently in weld cleaning where high quality surface appearance is
desirable
Specifications
Density 5
Color Tan
Letter color Red
Grade Fine
Package Maximum Operating Speed
Part Number Quantity Wheel Size Hole Size (RPM) Optimum Operating Speed
8T-7767 50 25.4 x 25.4 mm (1 in x 1 in) 4.8 mm (3/16 in) 35,100 22,000
Mandrel
8T-7768 5 – – 22,000 –

223
Abrasives — Wheels
Threaded Flap Wheels
Warranty: Manufacturer, 120 Day
• Flap wheels consist of a series of coated abrasive pieces (forming the spokes of
the wheel) which are mounted around a steel hub
• Supplied with a 1/4 in-20 thread mandrel designed for fast mounting
• Can be used on higher speed machines popular in today's market
• Delivers smooth, chatter-free grinding
NOTE:
Best speed ranges from 6,000 to 9,000 SFPM (surface feet per minute). Wheels should
be operated in direction of arrow. Never exceed maximum operating speed.

Optimum Surface Feet per Minute Speed Type Material

5,500 Aluminum
4,000 Hardwood
5,000 Non-ferrous metals
5,000 Steel (alloy)
5,000 Steel (mild)
6,500 Steel (stainless)

Part Number Package Quantity Size Grit Max. Speed (RPM) Description
4C-8511 10 1 in x 1 in 60 25,000 –
4C-8512 10 1 in x 1 in 120 25,000 –
4C-8513 10 1 in x 1 in 180 25,000 –
4C-8514 10 2 in x 1 in 60 20,000 –
4C-8515 10 2 in x 1 in 120 20,000 –
4C-8516 10 2 in x 1 in 180 20,000 –
4C-8517 10 3 in x 1 in 60 20,000 –
4C-8518 10 3 in x 1 in 120 20,000 –
4C-8519 10 3 in x 1 in 180 20,000 –
Mandrel
4C-8520 – 1/4 inch x 1 inch – – Adapter
4C-8521 – 1/4 inch x 4 inch – – Adapter

Mandrels
Warranty: Manufacturer, 120 Day
Maximum
Part Package Operating
Number Description Quantity Used with Diameter Hub/Shank Speed (RPM)
6V-4087 Mandrel 1 6V-4086/4C-3868/ 6.4 mm (1/4 6.35 shank x 25.4 6,000
279-2267 in) mm Dia. (1/4 x 1 in)
8T-3055 Mandrel 1 8T-3054 12.7 mm (1/2 6.35 x 70.5 mm Dia. 4,000
in) (1/4 x 2 1/2 in)

224
 Abrasives — Wheels
Surface Condition Brush
Warranty: Manufacturer, 120 Day
• Non-woven surface condition material with epoxy-filled center
• Available in three grades — very fine, medium, and coarse
• Shank size: 6.35 mm (.25 in)

Package
Part Number Size Grade Quantity
254-5316 38.1 x 25.4 mm (1.5 x 1 in) Coarse 1
254-5319 76.2 x 50.8 mm (3 x 2 in) Coarse 1
254-5317 38.1 x 25.4 mm (1.5 x 1 in) Medium 1
4C-8630 76.2 x 44.5 mm (3 x 1 3/4 in) Medium 1
254-5318 38.1 x 25.4 mm (1.5 x 1 in) Very Fine 1
254-5320 76.2 x 50.8 mm (3 x 2 in) Very Fine 1

Aluminum Oxide Large Flap Wheel Sander

Warranty: Manufacturer, 120 Day
• Flap wheel sander consists of a series of coated abrasive pieces (forming the
spokes of the wheel) which are mounted around a steel hub
• Delivers smooth, chatter-free grinding
• Used on bench grinder, stand grinder, or straight grinder with 25.4 mm (1 in)
spindle
• Material: aluminum oxide
NOTE:
Wheel should be operated in direction of arrow. Never exceed maximum operating
speed (RPM).

Part Number Size Grit Max. Speed (RPM) Package Quantity

262-9739 6 in x 1 in 120 6000 1

1/4 Inch Shank Abrasive Flap Wheels

Warranty: Manufacturer, 120 Day
• Aluminum-oxide coated abrasive flaps with cloth backing
• Delivers smooth, chatter-free grinding
• Use with handheld grinders
• Mounted on 6.35 mm (.25 in) shank
• Available in five popular grits and three sizes

Part Number Diameter x Thickness Grit Package Quantity

254-5321 25.4 x 25.4 mm (1 x 1 in) 60 10
254-5322 25.4 x 25.4 mm (1 x 1 in) 80 10
254-5323 25.4 x 25.4 mm (1 x 1 in) 120 10

225
Abrasives — Wheels
1/4 Inch Shank Abrasive Flap Wheels (Cont'd.)
Part Number Diameter x Thickness Grit Package Quantity
254-5324 25.4 x 25.4 mm (1 x 1 in) 180 10
254-5325 25.4 x 25.4 mm (1 x 1 in) 240 10
254-5326 50.8 x 25.4 mm (2 x 1 in) 60 10
254-5327 50.8 x 25.4 mm (2 x 1 in) 80 10
254-5328 50.8 x 25.4 mm (2 x 1 in) 120 10
254-5329 50.8 x 25.4 mm (2 x 1 in) 180 10
254-5330 50.8 x 25.4 mm (2 x 1 in) 240 10
254-5331 76.2 x 25.4 mm (3 x 1 in) 60 10
254-5332 76.2 x 25.4 mm (3 x 1 in) 80 10
254-5333 76.2 x 25.4 mm (3 x 1 in) 120 10
254-5334 76.2 x 25.4 mm (3 x 1 in) 180 10
254-5335 76.2 x 25.4 mm (3 x 1 in) 240 10

Zirconium Raised Hub Wheels

Warranty: Manufacturer, 120 Day
• Designed for rough grinding applications, including:
— grinding/smoothing weld seams
— cleaning metal surfaces
• Designed for use on electrical or air powered right angle or vertical shaft
grinders
• Wheels fit 114.3 mm, 177.8 mm and 228.6 mm (4 1/2 in, 7 in and 9 in) grinders
• Type 28 wheels have built-in 15° angle for out of position work
• Wheels comply with ANSI safety code B-7.1
• 1/4 - inch (6 mm) thick

Package
Part Number Quantity Grit Dimensions Thread Size Max. Speed (RPM)
Type 27
4C-3769 5 A24 7 inch (177 mm) 7/9 8,500
4C-3770 5 A24 7 inch (177 mm) 5/9 - 11 8,500
4C-3772 5 A24 9 inch (228 mm) 5/9 - 11 6,600
9U-6383 1 A24 5 inch (127 mm) 5/9 - 11 12,220
Type 28 (built-in 15 degree angle)
4C-3773 5 A24 7 inch (177 mm) 7/8 8,500
4C-3774 5 A24 7 inch (177 mm) 5/9 - 11 8,500
4C-3776 5 A24 9 inch (228 mm) 5/9 - 11 6,600

226
 Abrasives — Wheels
Aluminum Oxide Raised Hub Wheels
Warranty: Manufacturer, 120 Day
• Designed for use on electrical or air powered right angle or vertical shaft
grinders
• Designed for rough grinding applications, including:
– grinding/smoothing weld seams
– cleaning metal surfaces
• Wheels fit 114.3 mm, 177.8 mm and 228.6 mm (4 1/2 in, 7 in and 9 in) grinders
• Type 28 wheels have built-in 15° angle for out of position work
• Wheels comply with ANSI safety code B-7.1

Part Number Package Quantity Grit Dimensions Thread Size Max. Speed (RPM)
Type 27
1U-6788 10 A24 102 x 3 mm (4 x 1/8 in) 5/8 15,300
1U-6789 10 A24 102 x 6 mm (4 x 1/4 in) 5/8 15,300
1U-6790 10 A24 114 x 3 mm (4 1/2 x 1/8 in) 7/8 13,300
1U-6791 10 A24 114 x 6 mm (4 1/2 x 1/4 in) 7/8 13,300
1U-6792 10 A24 177 x 3 mm (7 x 1/8 in) 7/8 8,500
1U-6793 10 A24 177 x 6 mm (7 x 1/4 in) 7/8 8,500
1U-6794 10 A24 177 x 6 mm (7 x 1/4 in) 5/8 - 11 8,500
1U-6796 10 A24 228 x 6 mm (9 x 1/4 in) 5/8 - 11 6,600
236-8061 Bulk A24 152 x 6 mm (6 x 1/4 in) 7/8 10,000
9U-6382 1 A24 127 x 6 mm (5 x 1/4 in) 5/8 - 11 12,220
Type 28 (built-in 15 degree angle)
4C-3863 10 A24 228 x 6.35 mm (9 x 1/4 in) 5/8 - 11 6,600

Cut-Off Wheels
Warranty: Manufacturer, 120 Day
• Fully reinforced cut-off wheels for heavy-duty cut off jobs on ferrous metals
• Wheels comply with ANSI Safety Code B-7.1
• Use A60 for burr-free, cool cutting of metal
• Use A36 for rough cutting applications
• Offers quality at a competitive price

Part Number Package Quantity Grit Dimensions Hole Size Max. Speed (RPM)
3- inch / 25,000 RPM
174-8900 25 A60 76 x 1 mm (3 x 1/32 in) 1/4 in 25,000
174-8901 25 A60 76 x 1.5 mm (3 x 1/16 in) 3/8 in 25,000
174-8902 25 A36 76 x 1.5 mm (3 x 1/16 in) 1/4 in 25,000
174-8903 25 A36 76 x 3 mm (3 x 1/8 in) 3/8 in 25,000

227
Abrasives — Wheels
Cut-Off Wheels (Cont'd.)
Part Number Package Quantity Grit Dimensions Hole Size Max. Speed (RPM)
174-8904 25 A36 76 x 3 mm (3 x 1/8 in) 3/8 in 25,000
174-8905 25 A36 76 x 1 mm (3 x 1/32 in) 1/4 in 25,000
4 - inch / 20,000 RPM
174-8906 25 A60 101 x 1 mm (4 x 1/32 in) 1/4 in 20,000
174-8907 25 A60 101 x 1 mm (4 x 1/32 in) 3/8 in 20,000
174-8908 25 A36 101 x 1.5 mm (4 x 1/16 in) 1/4 in 20,000
174-8909 25 A36 101 x 1.5 mm (4 x 1/16 in) 3/8 in 20,000
174-8910 25 A36 101 x 3 mm (4 x 1/8 in) 1/4 in 20,000
174-8911 25 A36 101 x 3 mm (4 x 1/8 in) 3/8 in 20,000
Below 6,000 RPM
1U-6809 25 A36 304 x 3 mm (12 x 7/64 in) 1 in 5,100
1U-6810 25 A36 356 x 3 mm (14 x 7/64 in) 1 in 4,400
1U-6811 10 A24 406 x 3 mm (16 x 5/32 in) 1 in 3,000

228
 Abrasives — Wheels
Thin Cut Abrasive Cutting Wheels
Warranty: Manufacturer, 120 Day
• High quality treated grain for long life
• Ideal for sheet metal, steel tubing, and solid stock
• Great for cutting off bolts and rusted fasteners
• Used on portable angle grinders
• Available in 1/32 and 1/16 inch thickness for fast cutting

Part Number Size Grade Max. Speed (RPM) Package Quantity

236-8066 114.3 mm x .889 mm x 22.23 mm (4 1/2 in x .035 in x 7/8 in) A60 17,902 Bulk
236-8067 127 mm x .889 mm x 22.23 mm (5 in x .035 in x 7/8 in) A60 12,223 Bulk
236-8068 152.4 mm x .889 mm x 22.23 mm (6 in x .035 in x 7/8 in) A60 10,186 Bulk

Drill Sharpening Wheels (Type 1)

Warranty: Manufacturer, 120 Day
• Used on drill sharpening machines to form or resharpen drills
• Use aluminum oxide for all types of steel
• Use silicone carbide for tungsten carbide, non-ferrous metals such as brass,
bronze and aluminum
Package
Part Number Grit Spec. Wheel Size (O.D. x Thickness x I.D.) Quantity
4C-3766 A80-H Aluminum 152.4 mm x 19 mm x 15.88 mm (6 in x 3/4 in x 5/8 in) 1
Oxide
4C-3768(1) C80-I Silicon Carbide 152.4 mm x 19 mm x 15.88 mm (6 in x 3/4 in x 5/8 in) 1

Mandrel for Small Abrasive Wheels

Warranty: Manufacturer, 120 Day
• Simple, quick change design
• Used with small cut-off wheels with either a 1/4 inch or 3/8 inch hole
• Not recommended for wheels thicker than 1/8 inch
• Safe to use in die grinders up to 30,000 RPM
• Flush head for confined work
• Stress relieved, high tensile steel
• Includes two screws, one for 1/4 inch and one for 3/8 inch holes

Part Number Description Dimensions Package Quantity

236-8038 Mandrel 2 inch OAL x 1/4 inch shank 1

1 Used to sharpen cobalt or carbide drill bits and tools

229
Abrasives — Wheels
Portable Wheels — Reinforced (Type 1)
Warranty: Manufacturer, 120 Day
• These reinforced wheels are to be used on grinders to clean up and blend
• Straight wheels are to be used on portable horizontal shaft or straight shaft
machines

Max.
Part Grit Speed Package
Number Spec. (RPM) Wheel Size (O.D. x Thickness x I.D.) Quantity
4C-3777 A36 27,120 50.8 mm x 12.7 mm x 9.53 mm (2 in x 1/2 in x 3/8 in) 10
4C-3864 A24 27,120 50.8 mm x 12.7 mm x 9.53 mm (2 in x 1/2 in x 3/8 in) 10
4C-3865 A36 18,080 76.2 mm x 9.53 mm x 9.53 mm (3 in x 3/8 in x 3/8 in) 10

Bench and Pedestal Wheels (Type 1)

Warranty: Manufacturer, 120 Day
• Cover a broad range of general bench grinding jobs
• Offer custom quality
• Choose aluminum oxide wheels for all types of steel
• 6-inch and 7-inch wheels come with 1/2”, 5/8”, 3/4” reduction bearings
8-inch wheels come with 5/8” and 3/4” reduction bearings
10-inch wheels come with 3/4” and 1” reduction bearings

Part Max. Speed Package

Number Grit Spec. (RPM) Wheel Size (O.D. x Thickness x I.D.) Quantity
1U-6784 A36 3,600 177.8 mm x 25.4 mm x 25.4 mm (7 in x 1 in x 1 in) 1
1U-6786 A36 3,600 203.2 mm x 25.4 mm x 25.4 mm (8 in x 1 in x 1 in) 1
1U-6787 A60 3,600 203.2 mm x 25.4 mm x 25.4 mm (8 in x 1 in x 1 in) 1
1U-8285 A36 2,485 254 mm x 25.4 mm x 31.75 mm (10 in x 1 in x 1 1/4 in) 1
1U-8286 A60 2,485 254 mm x 25.4 mm x 31.75 mm (10 in x 1 in x 1 1/4 in) 1

230
 Abrasives — Wheels
Aluminum Oxide Flaring Cup Snagging Wheels (Type 11)
Warranty: Manufacturer, 120 Day
• Use on right angle or vertical machines
• Use for grinding welds, cleaning castings, or grinding fins and parting lines from
rough castings
• Use for smoothing of weld seams and metal preparations prior to plating/painting

Part Grit Max. Speed Package

Number Spec. (RPM) Large O.D. / Small O.D. x Thickness x I.D. Quantity
1U-6817 A16 9,075 101.6/76.2 mm x 50.8 mm x 5/8 in-11 (4/3 in x 2 in x 5/8 in-11) 10
1U-6818 A16 7,260 127/95.3 mm x 50.8 mm x 5/8 in-11 (5/3 3/4 in x 2 in x 5/8 in-11) 10
1U-6819 A16 6,000 152.4/120.7 mm x 50.8 mm x 5/8 in-11 (6/4 3/4 in x 2 in x 5/8 in-11) 5

Mandrel #936
Warranty: Manufacturer, 120 Day
Part Number Package Quantity Maximum Operating Speed
8T-7768 5 22,000

231
Abrasives — Miscellaneous
Abrasive Hand Pads
Warranty: Manufacturer, 120 Day
• Every workplace has uses for non-woven nylon abrasive hand pads—whenever
surfaces must be conditioned or cleaned by hand
• Used to clean surfaces or remove rust, oxides, paint discoloration, and other sur-
face contaminants
• Impart and blend cosmetic finishes on metal or highlight wood finishes
• Hand deburr metals and plastics quickly and economically
• Used with optional 4C-4175 Hand Pad Holder
• Size: 152 x 229 mm (6 x 9 in)

Part Number Description Grade Color Package Quantity

8T-7752 Long Life Production Coarse Black 20
262-9980 Heavy-Duty Aggressive Extra Coarse Tan 20
241-9512 Cleaning and Finishing Fine Gray 20
8T-7765 General Purpose Medium Green 20
8T-7751 Medium-Duty Cleaning Medium Maroon 20
4C-4175 Pad Holder – – –

Aluminum Oxide Cutting and Polishing Rolls

Warranty: Cat Standard Warranty, 6 Months
• A unique and aggressive material for cleaning, finishing deburring
• Ideal as a utility bench roll
• Used in similar application as Emery Rolls, but does not load up with material

Details
Mineral type Aluminum oxide
Color Tan
Grade Very fine, medium

Package
Part Number Quantity Size Grade Used with
1U-5512 1 25.4 mm x 9 m (1 in x 30 ft) Very Fine Hand application or hand drill with 8T-7766 mandrel
1U-5513 1 25.4 mm x 9 m (1 in x 30 ft) Medium Hand application or hand drill with 8T-7766 mandrel
1U-5514 1 51 mm x 9 m (2 in x 30 ft) Very Fine Hand application or hand drill with 8T-7766 mandrel
1U-5515 1 51 mm x 9 m (2 in x 30 ft) Medium Hand application or hand drill with 8T-7766 mandrel

232
 Abrasives — Miscellaneous
Adapter Mandrel #935
Warranty: Manufacturer, 30 Day
• Tear off strip and insert in the mandrel to use in corners and other hard to reach
areas
• Use on air drills

Part Number Maximum Operating Speed Package Quantity

8T-7766 6000 RPM with 25.4 x 38.1 mm 5
(1 in x 1 1/2 in) flat stock (roll or hand pad)

Polishing Stone
Warranty: Cat Standard Warranty, 6 Months
• Use this fine grade polishing stone to remove the sharp, raised edges of nicks
and burrs on machine components
• More useful than the emery paper where a burr or raised edge is large
• Should always be used with a lightweight oil

Part Number Dimensions Package Quantity

6V-2010 100 mm x 25 mm x 6 mm (4 in x 1 in x .25 in) 1

Sanding Cloth Rolls

Warranty: Manufacturer, 120 Day
• These cloth shop rolls are cut in various widths and can be torn to the desired
length for hand deburring
• For contour sanding, stripping, deburring, rust removal, cutdown prior to polish-
ing, and all general maintenance work

Part Number Grit Dimensions Package Quantity

1– inch
262-9732 180J 25 mm x 45.7 m (1 in x 50 yd) 1
262-9737 320J 25 mm x 45.7 m (1 in x 50 yd) 1
262-9740 400J 25 mm x 45.7 m (1 in x 50 yd) 1
269-7255 80J 25 mm x 45.7 m (1 in x 50 yd) 1
269-7256 100J 25 mm x 45.7 m (1 in x 50 yd) 1
269-7257 120J 25 mm x 45.7 m (1 in x 50 yd) 1
269-7258 220J 25 mm x 45.7 m (1 in x 50 yd) 1
269-7259 280J 25 mm x 45.7 m (1 in x 50 yd) 1
269-7260 500J 25 mm x 45.7 m (1 in x 50 yd) 1
1 1/2 – inch
1U-6848 60J 38.1 mm x 45.7 m (1 1/2 in x 50 yd) 1
1U-6849 80J 38.1 mm x 45.7 m (1 1/2 in x 50 yd) 1
1U-6850 120J 38.1 mm x 45.7 m (1 1/2 in x 50 yd) 1
1U-6851 180J 38.1 mm x 45.7 m (1 1/2 in x 50 yd) 1

233
Abrasives — Miscellaneous
Sanding Cloth Rolls (Cont'd.)
Part Number Grit Dimensions Package Quantity
1U-6852 240J 38.1 mm x 45.7 m (1 1/2 in x 50 yd) 1
1U-6853 320J 38.1 mm x 45.7 m (1 1/2 in x 50 yd) 1
4C-8522 80 38.1 mm x 22.7 m (1 1/2 in x 25 yd) 1
4C-8523 120 38.1 mm x 22.7 m (1 1/2 in x 25 yd) 1
4C-8524 180 38.1 mm x 22.7 m (1 1/2 in x 25 yd) 1
2 – inch
1U-8274 60J 50.8 mm x 45.7 m (2 in x 50 yd) 1
1U-8275 80J 50.8 mm x 45.7 m (2 in x 50 yd) 1
1U-8276 100J 50.8 mm x 45.7 m (2 in x 50 yd) 1
1U-8277 120J 50.8 mm x 45.7 m (2 in x 50 yd) 1
1U-8278 180J 50.8 mm x 45.7 m (2 in x 50 yd) 1
1U-8279 240J 50.8 mm x 45.7 m (2 in x 50 yd) 1
1U-8280 320J 50.8 mm x 45.7 m (2 in x 50 yd) 1
262-9741 400J 50.8 mm x 45.7 m (2 in x 50 yd) 1

Sanding Sheets
Warranty: Manufacturer, 120 Day
• These sheets are used for sanding and metal surface preparation
• Engineered for maximum economy, fast cutting and smoothing action
• Excellent for scouring, deburring, scale and rust removal

Part Number Grit Abrasive Size Package Quantity

266-3452 4/0 Emery 228.6 x 349.3 mm (9 in x 13.75 in) 100
1U-6854 60J Aluminum Oxide 228.6 x 279.4 mm (9 in x 11 in) 25
1U-6855 80J Aluminum Oxide 228.6 x 279.4 mm (9 in x 11 in) 25
1U-6856 120J Aluminum Oxide 228.6 x 279.4 mm (9 in x 11 in) 50
1U-6857 180J Aluminum Oxide 228.6 x 279.4 mm (9 in x 11 in) 50
1U-6858 240J Aluminum Oxide 228.6 x 279.4 mm (9 in x 11 in) 50
1U-6859 320J Aluminum Oxide 228.6 x 279.4 mm (9 in x 11 in) 50
1U-8281 400A Silicon Carbide 228.6 x 279.4 mm (9 in x 11 in) 50
1U-8282 500A Silicon Carbide 228.6 x 279.4 mm (9 in x 11 in) 50
1U-8283 600A Silicon Carbide 228.6 x 279.4 mm (9 in x 11 in) 50
4C-8510 Crocus Ferrous Oxide 228.6 x 279.4 mm (9 in x 11 in) 50

234
 Abrasives — Miscellaneous
Surface Conditioning Belts
Warranty: Manufacturer, 120 Day
• Excellent tool to polish crankshafts
• Ideal for high tension applications
• Unique, reinforced construction delivers a uniform, consistent finish that can be
applied with abrasive belt machinery
• Surface conditioning belts are reinforced which allows the material to be spliced
into a continuous belt
• Open construction resists loading and heat buildup that normally affects belt life
and performance
• As it wears, the surface conditioning material exposes fresh abrasive mineral to
the work surface, providing consistent results throughout the belt's life
• Density: 5

Package Maximum Optimum

Part Number Quantity Wheel Size Operating Speed Operating Speed Grade Color Used with
6V-3044 12 25.4 mm x 165.1 cm 6500 SFPM 5500 SFPM Fine Blue Abrasive belt machinery
(1 in x 65 in)

Sanding Belts
Warranty: Manufacturer, 120 Day
• Used with any 7.62 x 53.34 cm (3 x 21 in) belt sander
• Material: aluminum oxide with cloth back

Part Number Grade Color

262-9742 36 grit - coarse Tan
262-9743 80 grit - medium Tan
262-9744 120 grit - fine Tan
262-9745 220 grit - super fine Tan

Aluminum Oxide Cleaning and Polishing Stars

Warranty: Manufacturer, 120 Day
• Perfect choice for cleaning and polishing the inside diameters of pipe, tubing, cyl-
inders and other interior spaces
• Star shape allows the star tips to provide constant outward pressure on the walls
to produce uniform and consistent results
• Can be mounted singly or in multiples for efficient inside diameter cleaning and
polishing operations
• Adapter: 4C-8629 Mandrel

235
Abrasives — Miscellaneous
Aluminum Oxide Cleaning and Polishing Stars (Cont'd.)
Maximum Operating Optimum Operating
Part Number Package Quantity Diameter Speed Speed
4C-8624 25 38.1 mm (1 1/2 in) 24,000 18,000
4C-8625 25 50.8 mm (2 in) 24,000 18,000
4C-8626 10 76.2 mm (3 in) 18,000 15,000
4C-8627 10 101.6 mm (4 in) 18,000 15,000
4C-8628 10 114.3 mm (4 1/2 in) 18,000 15,000
Mandrel
4C-8629 – – – –

Surface Reconditioning Flex-Hone Tools

Warranty: Manufacturer, 90 Day
• The flex-hone process (Superfinishing) produces a controlled surface condition that
will result in:
– Lowered oil consumption
– Less blow-by
– Less friction
– Plateaued finish over 50%
– Finish free from cut, and folded metal
• All abrasive is silicone carbide
• Resilient, flexible, honing tool with soft cutting action
• Abrasive (points) globules each have independent suspension that assures the
hone to be self-centering, self-aligning to the bore, and self-compensating for wear
• A low temperature abrading process that exposes the undisturbed base metal
structure to produce a long wearing surface
• Method of developing a surface on a metal part which is optically smooth and met-
allurgically free of any fragmented, amorphous or smeared metal from previous
operations
• Accomplished at a low pressure where the "stones" float
• Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or
valleys for oil retention as opposed to the uni-directional or uneven valleys common
to the conventional type rigid hone. A crosshatch that usually remains as the cylin-
der wall has been wear-reduced by the hone.

Part Number Package Quantity Engine Bore Size Grit

1U-7428 1 101.6 mm (4 in) 240
1U-9787 1 120.65-127 mm (4 3/4 in-5 in) 180
4C-6322 1 101.6 mm (4 in) 180
4C-6323 1 107.95 mm (4 1/4 in) 180
4C-6324 1 117.3 mm (4 1/2 in) 180
4C-6325 1 133.5-137.16 mm (5 1/4 in-5.4 in) 180

236
 Abrasives — Miscellaneous
Surface Reconditioning Flex-Hone Tools (Cont'd.)
Part Number Package Quantity Engine Bore Size Grit
4C-6326 1 146.05-152.4 mm (5 3/4 in-6 in) 180
4C-6327 1 158.75 mm (6 1/4 in) 180
4C-6328 1 169.92-177.8 mm (6.69 in-7 in) 180
4C-6329 1 190.5 mm (7 1/2 in) 180
4C-6330 1 203.2 mm (8 in) 180
4C-6331 1 241.3 mm (9 1/2 in) 180
4C-6332 1 60.33 mm (2 3/8 in) 240
4C-6333 1 79.38 mm (3 1/8 in) 240
4C-6334 1 92.08 mm (3 5/8 in) 240
4C-6335 1 104.78 mm (4 1/8 in) 240
4C-6336 1 114.3 mm (4 1/2 in) 240
4C-6337 1 12.7 mm (1/2 in) 320
4C-6338 1 15.88 mm (5/8 in) 320
4C-6339 1 19 mm (3/4 in) 320
4C-6340 1 25.4 mm (1 in) 320
4C-6341 1 38.1 mm (1 1/2 in) 320

Mounted Points
Warranty: Manufacturer, 120 Day
• Mounted wheels are used with horizontal or straight shaft, die and pen-
cil grinders on jobs where larger wheels will not fit
• Offer maximum performance for grinding ferrous metals
• Accurate spindles ensure precision grinding and minimize run-out
• A-shaped wheels are for medium to heavy-duty blending and
contouring
• W-shaped wheels are for off-hand and precision grinding of medium to
heavy stock

Part Grit Package

Number Shape Spec. Diameter x Length Max Speed Mandrel Diameter Quantity
1U-6820 A1 A36 19 mm x 63.5 mm (3/4 in x 2 1/2 in) 19,800 6.4 mm (1/4 in) 25
1U-6821 A1 A60 19 mm x 63.5 mm (3/4 in x 2 1/2 in) 19,800 6.4 mm (1/4 in) 25
1U-6822 A3 A36 25.4 mm x 69.85 mm (1 in x 2 3/4 in) 16,100 6.4 mm (1/4 in) 25
1U-6823 A3 A60 25.4 mm x 69.85 mm (1 in x 2 3/4 in) 16,100 6.4 mm (1/4 in) 25
1U-6824 A11 A36 22.23 mm x 50.8 mm (7/8 in x 2 in) 19,860 6.4 mm (1/4 in) 25
1U-6825 A11 A60 22.23 mm x 50.8 mm (7/8 in x 2 in) 19,860 6.4 mm (1/4 in) 25
1U-6826 A38 A60 25.4 mm x 25.4 mm (1 in x 1 in) 34,500 6.4 mm (1/4 in) 25
4C-3845 A4 A60 31.75 mm x 31.75 mm (1 1/4 in x 1 1/4 in) 30,560 6.4 mm (1/4 in) 25
4C-3846 A5 A36 19 mm x 28.58 mm (3/4 in x 1 1/8 in) 45,000 6.4 mm (1/4 in) 25
4C-3849 A12 A36 26.9 mm x 31.75 mm (11/16 in x 1 1/4 in) 48,000 6.4 mm (1/4 in) 25
4C-3850 A12 A60 26.9 mm x 31.75 mm (11/16 in x 1 1/4 in) 48,000 6.4 mm (1/4 in) 25
4C-3852 A39 A60 19 mm x 19 mm (3/4 in x 3/4 in) 47,250 6.4 mm (1/4 in) 25

237
Abrasives — Miscellaneous
Mounted Points (Cont'd.)
Part Grit Package
Number Shape Spec. Diameter x Length Max Speed Mandrel Diameter Quantity
4C-3853 W220 A60 25.4 mm x 25.4 mm (1 in x 1 in) 20,250 6.4 mm (1/4 in) 25
4C-3854 W235 A60 38.1 mm x 6.35 mm (1 1/2 in x 1/4 in) (with hub) 25,460 6.4 mm (1/4 in) 25
4C-3855 W236 A60 38.1 mm x 12.7 mm (1 1/2 in x 1/2 in) (with hub) 25,460 6.4 mm (1/4 in) 25
4C-3856 W237 A60 38.1 mm x 25.4 mm (1 1/2 in x 1 in) 25,460 6.4 mm (1/4 in) 25
6V-4802 A37 A60 31.75 mm x 31.75 mm (1 1/4 in x 1 1/4 in) (with hub) 30,560 6.4 mm (1/4 in) 25

Threaded Cones and Plugs

Warranty: Manufacturer, 120 Day
• Use on horizontal shaft and vertical shaft grinders
• Choose these for welding shop jobs such as:
– Grinding and smoothing fillets and corners
– Internal grinding
– Blending contours
– Work in confined areas
• Center holes have molded-in bushings, available in 5/8 inch-11 threads to fit most
popular grinder spindles
Available in four shapes:
• Type 16 with rounded tip for grinding mild contours or flat surfaces
• Type 17 with square tip for beveling workpiece edges prior to welding
• Type 18 square plugs for use on straight shaft grinders for work on flat surfaces
• Type 18R also called pot balls, for work requiring straight sides and rounded tips

Package
Item Part Number Grit Spec. O.D. x Length x Thread Size Quantity
Type 16 1U-6812 A24 38.1 mm x 76.2 mm x 5/8 in-11 (1 1/2 in x 3 in x 5/8 in-11) 10
Type 17 1U-6813 A24 63.5 mm x 76.2 mm x 5/8 in-11 (2 1/2 in x 3 in x 5/8 in-11) 10
Type 18 1U-6814 A24 38.1 mm x 63.5 mm x 5/8 in-11 (1 1/2 in x 2 1/2 in x 5/8 in-11) 10
Type 18R 1U-6815 A24 38.1 mm x 63.5 mm x 5/8 in-11 (1 1/2 in x 2 1/2 in x 5/8 in-11) 10
Type 18R 1U-6816 A24 50.8 mm x 76.2 mm x 5/8 in-11 (2 in x 3 in x 5/8 in-11) 10

238
 Abrasives — Miscellaneous
Carbide Burrs
Warranty: Manufacturer, 120 Day
• Ideally used on high speed die grinders for steel, iron and
composites
• "Double cut" designed burs provide rapid stock removal in tough
applications
• Produces small chips
• A variety of shapes for most applications
• Excellent for grinding and shaping most metallic and non-metallic
materials

Package
Part Number Size Shape Shank Size Quantity
236-8093 9.53 mm x 15.88 mm (3/8 in x 5/8 in) Egg 6.35 mm (1/4 in) 1
236-8094 9.53 mm (3/8 in) Ball 6.35 mm (1/4 in) 1
236-8095 9.53 mm x 19 mm (3/8 in x 3/4 in) Pointed Tree 6.35 mm (1/4 in) 1
236-8096 9.53 mm x 19 mm (3/8 in x 3/4 in) Cylindrical 6.35 mm (1/4 in) 1
236-8097 9.53 mm x 19 mm (3/8 in x 3/4 in) Round Nose 6.35 mm (1/4 in) 1
236-8098 9.53 mm x 26.99 mm (3/8 in x 11/16 in) Cone Radius End 6.35 mm (1/4 in) 1
236-8100 3.18 mm x 14.29 mm (1/8 in x 9/16 in) Flat End Cut 3.18 mm (1/8 in) 1
236-8101 3.18 mm x 14.29 mm (1/8 in x 9/16 in) Round End 3.18 mm (1/8 in) 1
262-9746 6.35 mm x 19 mm (1/4 in x 3/4 in) Cylindrical 6.35 mm (1/4 in) 1
262-9747 12.7 mm x 25.4 mm (1/2 in x 1 in) Cylindrical 6.35 mm (1/4 in) 1
262-9748 6.35 mm x 19 mm (1/4 in x 3/4 in) Cylindrical 6.35 mm (1/4 in) 1

Aluma Cut Carbide Burrs

Warranty: Manufacturer, 120 Day
• For use with aluminum non-ferrous metals and non-metallic materials
• Wide clearance and end mill type geometry of the flutes promotes fast stock re-
moval with minimum loading
• Material: tungsten carbide

Part
Number Size Shape Package Quantity
236-8104 9.53 mm x 19 mm (3/8 in x 3/4 in) Cylindrical 1

Spira Bands
Warranty: Manufacturer, 120 Day
• Ideal for grinding, blending, deburring, finishing and polishing flat and contoured
surfaces
• Design eliminates lap bumping marks, provides chatter free operation
• Good alternative tools for flap wheels

239
Abrasives — Miscellaneous
Spira Bands (Cont'd.)

Part Number Grit Size Package Quantity

Mandrels
4C-3778 60 19 mm x 25.4 mm (3/4 in x 1 in) 1
4C-3779 60 25.4 mm x 25.4 mm (1 in x 1 in) 1
4C-3780 60 38.1 mm x 38.1 mm (1 1/2 in x 1 1/2 in) 1
4C-3781 60 50.8 mm x 25.4 mm (2 in x 1 in) 1
4C-3782 Mandrel 1/4 in 19 mm x 25.4 mm (3/4 in x 1 in) 1
4C-3783 Mandrel 1/4 in 25.4 mm x 25.4 mm (1 in x 1 in) 1
4C-3784 Mandrel 1/4 in 38.1 mm x 38.1 mm (1 1/2 in x 1 1/2 in) 1
4C-3785 Mandrel 1/4 in 50.8 mm x 25.4 mm (2 in x 1 in) 1

Screen-Bak Durite Rolls

Warranty: Manufacturer, 120 Day
• Use for superfast makeready of copper pipe joints
• Removes scale, corrosion and oxidations without clogging — sanding residue
falls through the backing
• Long abrasive life and clean, tight connections are ensured
• Silicon carbide abrasive grain is coated on both sides of an open weave, cloth
backing

Part Number Grit Size

4C-8522 80 11/2 in x 25 ft
4C-8523 120 11/2 in x 25 ft
4C-8524 180 11/2 in x 25 ft

Decal Removal
• Fast and easy method to remove vinyl decals, graphics, tapes, films and adhesive
without damaging paint – no fire damage because the discs are noncombustible.
• Unique construction of the disc assures long life and allows easy conformability
to contours
• Discs are flexible and have no sharp edges – will not damage acrylic, enamel or
urethane paint. (Not recommended for use on acrylic lacquer paints or
plexiglass.)
• Faster and cleaner to use than solvent or chemical adhesive removers
• RPM is critical for product performance – maximum RPM is 4000; recommended
RPM is 3000 to 4000

240
 Abrasives — Miscellaneous
Decal Removal (Cont'd.)
Package
Part Number Description Quantity Diameter Shank Length Used With
226-0125 Decal Removal Disc 1 120 mm x 15.9 mm (4 in x 5/8 in) — Electric or Air Drill
226-0126 Mandrel 1 25.4 mm x 44.5 mm (1 in x 3/4 in) 9 mm ( 0.35 in) —

Nylon Cleaning Brushes

Warranty: Cat Standard Warranty, 6 Months
• Used in a variety of cleaning applications, such as spray paint equipment and
parts washers for cleaning tubes, valves cylinders, etc.
• Nylon bristles clean dirt without damaging surface
• Available in several brush diameters to meet cleaning task requirements
• Nylon bristles with a 25 cm (10 in) metal handle
• Long handle for cleaning hard to reach dirt and debris

Part Number Brush Diameter Brush Length Qty.

264-4352 50.8 mm (2 in) 102 mm (4 in) 48
264-4355 12.7 mm (1/2 in) 51 mm (2 in) 48
264-4357 19.0 mm (3/4 in) 51 mm (2 in) 48
264-4358 22.2 mm (7/8 in) 102 mm (4 in) 48
264-4372 38.1 mm (1 1/2 in) 102 mm (4 in) 48
266-2281 6.4 mm (1/4 in) 51 mm (2 in) 48
266-2282 15.9 mm (5/8 in) 51 mm (2 in) 48
266-2283 31.8 mm (1 1/4 in) 102 mm (4 in) 48

Tube Brush
Warranty: Cat Standard Warranty, 6 Months

Package
Part Number Quantity Description O.D. Wire
4C-6161 1 76.2 mm (3 in) Brush Face, 609.6 mm (24 in) O.A.L. 9.53 mm (3/8 in) .13 mm (.005 in), Carbon Steel

Brass Bristle Cleaning Brush

Warranty: Cat Standard Warranty, 6 Months
• Use to clean tire beads prior to mounting
• Also good for other applications where steel or nylon bristles will not work
• Foam plastic handle will not crack when left in cleaning solution
• Dense brass bristles clean well and will not rust

241
Abrasives — Miscellaneous
Brass Bristle Cleaning Brush (Cont'd.)
Part Number Length x Width Bristle Length Package Quantity
262-4868 216 x 9 cm (8.5 x 3.5 in) 16 mm (.62 in) 12

Parts Cleaning Brush

Warranty: Cat Standard Warranty, 6 Months
• For general cleaning—works great in parts washers
• Will not rust or damage the surface of the part being cleaned
• All poly handle and ferrule with natural fiber bristles
• Tapered handle for better grip
• Long bristles reach hard to clean areas

Package
Part Number Diameter Overall Length Bristle Length Quantity
264-4359 25 mm (1 in) 25 cm (10 in) 64 mm (2.5 in) 12

242
 Metal Cutting — Drill Bits
Standard Drill Bits
Warranty: Manufacturer, 120 Day
These roll forged jobber length drills are designed with a 118° point. Made with M-2
high speed steel. A dependable general purpose drill bit designed to perform in a
broad range of materials in the iron and steel families. Ideal for production, mainte-
nance, or portable drilling jobs. Surface treated with abrasion resistant black oxide.

Part Number Size Part Number Size Part Number Size

1U-5889 Drill Bit Set (Plus Index), 13 Piece 1U-5600 15/64 in 1U-5593 1/8 in
1U-5589 1/16 in 1U-5601 1/4 in 1U-5594 9/64 in
1U-5590 5/64 in 1U-5602 17/64 in 1U-5595 5/32 in
1U-5591 3/32 in 1U-5603 9/32 in 1U-5596 11/64 in
1U-5592 7/64 in 1U-5604 19/64 in 1U-5597 3/16 in
1U-5593 1/8 in 1U-5605 5/16 in 1U-5598 13/64 in
1U-5594 9/64 in 1U-5606 21/64 in 1U-5599 7/32 in
1U-5595 5/32 in 1U-5607 11/32 in 1U-5600 15/64 in
1U-5596 11/64 in 1U-5608 23/64 in 1U-5601 1/4 in
1U-5597 3/16 in 1U-5609 3/8 in 1U-5602 17/64 in
1U-5598 13/64 in 1U-5610 25/64 in 1U-5603 9/32 in
1U-5599 7/32 in 1U-5611 13/32 in 1U-5604 19/64 in
1U-5600 15/64 in 1U-5612 27/64 in 1U-5605 5/16 in
1U-5601 1/4 in 1U-5613 7/16 in 1U-5606 21/64 in
1U-5714 Drill Bit Set (Plus Index), 29 Piece 1U-5614 29/64 in 1U-5607 11/32 in
1U-5589 1/16 in 1U-5615 15/32 in 1U-5608 23/64 in
1U-5590 5/64 in 1U-5616 31/64 in 1U-5609 3/8 in
1U-5591 3/32 in 1U-5617 1/2 in 1U-5610 25/64 in
1U-5592 7/64 in Individual Drill Bits 1U-5611 13/32 in
1U-5593 1/8 in 1U-5586 1/64 in 1U-5612 27/64 in
1U-5594 9/64 in 1U-5587 1/32 in 1U-5613 7/16 in
1U-5595 5/32 in 1U-5588 3/64 in 1U-5614 29/64 in
1U-5596 11/64 in 1U-5589 1/16 in 1U-5615 15/32 in
1U-5597 3/16 in 1U-5590 5/64 in 1U-5616 31/64 in
1U-5598 13/64 in 1U-5591 3/32 in 1U-5617 1/2 in
1U-5599 7/32 in 1U-5592 7/64 in 1U-6700 19/64 in

243
Metal Cutting — Drill Bits
Reduced Shank Drill Bits
Warranty: Manufacturer, 120 Day
S & D drill bits, as they are often called, are designed with a 118° point. Made with
M-2 high speed steel. Expands the size range capacity of a 1/2 portable drill chuck.
Common flute and overall length for minimal adjustment during tool changes. Preci-
sion ground for high degree of concentricity between shank and body diameter.
Ideal for drilling in low and medium tensile strength materials.

Part Number Size Part Number Size Part Number Size

Individual Drill Bits Individual Drill Bits Individual Drill Bits
1U-5682 17/32 in 1U-5694 29/32 in 1U-5707 1 5/16 in
1U-5683 9/16 in 1U-5695 15/16 in 1U-5709 1 3/8 in
1U-5684 19/32 in 1U-5696 31/32 in 1U-5711 1 7/16 in
1U-5685 5/8 in 1U-5697 1 in 1U-5713 1 1/2 in
1U-5686 21/32 in 1U-5698 1 1/32 in 1U-7433 33/64 in
1U-5687 1 1/16 in 1U-5699 1 1/16 in 1U-7434 37/64 in
1U-5688 23/32 in 1U-5700 1 3/32 in 1U-7435 45/64 in
1U-5689 3/4 in 1U-5701 1 1/8 in 1U-7436 53/64 in
1U-5690 25/32 in 1U-5702 1 5/32 in 1U-7437 1 9/16 in
1U-5691 13/16 in 1U-5703 1 3/16 in (3/4 inch Shank)
1U-5692 27/32 in 1U-5705 1 1/4 in 1U-7438 1 13/26 in
(3/4 inch Shank)
1U-5693 7/8 in

Heavy-Duty Drill Bits, 135° Split Point

Warranty: Manufacturer, 120 Day
These drill bits are designed with a 135° split point for self centering and reducing
thrust. Can reduce drill time by 50% compared to 118° point. Manufactured from pre-
mium M-2 grade high speed steel. Gold and black surface treated for use in stain-
less and other hard metal drilling. Sizes smaller than 1/16" have the 118° standard
point.

Part Number Size Part Number Size Part Number Size

1U-5892 Drill Bit Set (Plus Index), 13 Piece 1U-5628 11/64 1U-5622 5/64

1U-5621 1/16 1U-5629 3/16 1U-5623 3/32

1U-5622 5/64 1U-5630 13/64 1U-5624 7/64

1U-5623 3/32 1U-5631 7/32 1U-5625 1/8

1U-5624 7/64 1U-5632 15/64 1U-5626 9/64

1U-5625 1/8 1U-5633 1/4 1U-5627 5/32

1U-5626 9/64 1U-5893 Drill Bit Set (Plus Index), 29 Piece 1U-5628 11/64

1U-5627 5/32 1U-5621 1/16 1U-5629 3/16

244
 Metal Cutting — Drill Bits
Heavy-Duty Drill Bits, 135° Split Point (Cont'd.)
Part Number Size Part Number Size Part Number Size
1U-5630 13/64 1U-5647 15/32 1U-5633 1/4
1U-5631 7/32 1U-5648 31/64 1U-5634 17/64
1U-5632 15/64 1U-5649 1/2 1U-5635 9/32
1U-5633 1/4 Individual Drill Bits 1U-5636 19/64
1U-5634 17/64 1U-5620 3/64 1U-5637 5/16
1U-5635 9/32 1U-5621 1/16 1U-5638 21/64
1U-5636 19/64 1U-5622 5/64 1U-5639 11/32
1U-5637 5/16 1U-5623 3/32 1U-5640 23/64
1U-5638 21/64 1U-5624 7/64 1U-5641 3/8
1U-5639 11/32 1U-5625 1/8 1U-5642 25/64
1U-5640 23/64 1U-5626 9/64 1U-5643 13/32
1U-5641 3/8 1U-5627 5/32 1U-5644 27/64
1U-5642 25/64 1U-5628 11/64 1U-5645 7/16
1U-5643 13/32 1U-5629 3/16 1U-5646 29/64
1U-5644 27/64 1U-5630 13/64 1U-5647 15/32
1U-5645 7/16 1U-5631 7/32 1U-5648 31/64
1U-5646 29/64 1U-5632 15/64 1U-5649 1/2

Extra Heavy-Duty Cobalt Drill Bits, 135° Split Point

Warranty: Manufacturer, 120 Day
These drill bits are designed with a 135° split point for self centering and reducing
thrust. Can reduce drill time by 50% compared to 118° point. Made of high resistant
M 42 cobalt. They display higher red hardness which permits speeds up to 30%
greater than high speed drills. Cobalt drills are especially effective in drilling tough,
high tensile strength materials like stainless steel, inconec, and titanium.

Part Number Size Part Number Size Part Number Size

1U-5890 Drill Bit Set (Plus Index), 13 Piece 1U-5394 3/16 in 1U-5389 7/64 in
1U-5386 1/16 in 1U-5395 13/64 in 1U-5390 1/8 in
1U-5387 5/64 in 1U-5396 7/32 in 1U-5391 9/64 in
1U-5388 3/32 in 1U-5397 15/64 in 1U-5392 5/32 in
1U-5389 7/64 in 1U-5398 1/4 in 1U-5393 11/64 in
1U-5390 1/8 in 1U-5891 Drill Bit Set (Plus Index), 29 Piece 1U-5394 3/16 in
1U-5391 9/64 in 1U-5386 1/16 in 1U-5395 13/64 in
1U-5392 5/32 in 1U-5387 5/64 in 1U-5396 7/32 in
1U-5393 11/64 in 1U-5388 3/32 in 1U-5397 15/64 in

245
Metal Cutting — Drill Bits
Extra Heavy-Duty Cobalt Drill Bits, 135° Split Point (Cont'd.)
Part Number Size Part Number Size Part Number Size
1U-5398 1/4 in Individual Drill Bits 1U-5401 19/64 in
1U-5399 17/64 in 1U-5386 1/16 in 1U-5402 5/16 in
1U-5400 9/32 in 1U-5387 5/64 in 1U-5403 21/64 in
1U-5401 19/64 in 1U-5388 3/32 in 1U-5404 11/32 in
1U-5402 5/16 in 1U-5389 7/64 in 1U-5405 23/64 in
1U-5403 21/64 in 1U-5390 1/8 in 1U-5406 3/8 in
1U-5404 11/32 in 1U-5391 9/64 in 1U-5407 25/64 in
1U-5405 23/64 in 1U-5392 5/32 in 1U-5408 13/32 in
1U-5406 3/8 in 1U-5393 11/64 in 1U-5409 27/64 in
1U-5407 25/64 in 1U-5394 3/16 in 1U-5410 7/16 in
1U-5408 13/32 in 1U-5395 13/64 in 1U-5411 29/64 in
1U-5409 27/64 in 1U-5396 7/32 in 1U-5412 15/32 in
1U-5410 7/16 in 1U-5397 15/64 in 1U-5413 31/64 in
1U-5411 29/64 in 1U-5398 1/4 in 1U-5414 1/2 in
1U-5412 15/32 in 1U-5399 17/64 in 1U-8764 5/8 in (1/2 inch Shank)
1U-5413 31/64 in 1U-5400 9/32 in 1U-8765 3/4 in (1/2 inch Shank)
1U-5414 1/2 in

Aircraft Drill Bits

Warranty: Manufacturer, 120 Day
These drill bits are designed with a 135° split point for self centering and reducing
thrust. Made with M-2 high speed steel. Can reduce drill time by 50% compared to
118° point. Ground from solid, ideal for drilling in mild steel where extra length is re-
quired. They have a black oxide surface treatment that is abrasion resistant.

Part Number Size

Individual Drill Bits (set not available)
4C-4412 3/32 in
4C-4413 1/8 in
4C-4414 5/32 in
4C-4415 3/16 in
4C-4416 7/32 in
4C-4417 1/4 in
4C-4418 9/32 in
4C-4419 5/16 in
4C-4420 11/32 in
4C-4421 3/8 in
4C-4422 13/32 in
4C-4423 7/16 in
4C-4424 15/32 in
4C-4425 Drill, 1/2 in

246
 Metal Cutting — Drill Bits
Left Hand Drill Bits
Warranty: Manufacturer, 120 Day
These drill bits are designed with a 135° split point for self centering and reducing
thrust. Made with M-2 high speed steel. Ground from solid features a left hand helix
for screw machine applications and drilling out broken bolts.
• Index set not available

Part Number Size Part Number Size Part Number Size

4C-3335 1/16 in 4C-3345 7/32 in 4C-3355 3/8 in
4C-3336 5/64 in 4C-3347 1/4 in 4C-3356 25/64 in
4C-3337 3/32 in 4C-3348 17/64 in 4C-3357 13/32 in
4C-3338 7/64 in 4C-3349 9/32 in 4C-3358 27/64 in
4C-3339 1/8 in 4C-3350 19/64 in 4C-3359 7/16 in
4C-3340 9/64 in 4C-3351 5/16 in 4C-3360 7/16 in
4C-3341 5/32 in 4C-3352 21/64 in 4C-3361 15/32 in
4C-3342 11/64 in 4C-3353 11/32 in 4C-3362 31/64 in
4C-3343 3/16 in 4C-3354 23/64 in 4C-3363 1/2 in
4C-3344 13/64 in

Metric Standard Drill Bits

Warranty: Manufacturer, 120 Day
These roll forged drill bits are designed with a 118° point. Made with M-2 high speed
steel. A dependable general purpose drill designed to perform in a broad range of
material in the iron and steel families. Ideal for production, maintenance, or portable
drilling jobs.

Part Number Size Part Number Size Part Number Size

1U-8122 1.20 mm 1U-8152 5.20 mm 1U-8165 8.70 mm
1U-8126 1.80 mm 1U-8153 5.50 mm 1U-8166 9.00 mm
1U-8133 2.50 mm 1U-8156 6.00 mm 1U-8167 9.50 mm
1U-8138 3.00 mm 1U-8157 6.50 mm 1U-8168 10.00 mm
1U-8142 3.60 mm 1U-8158 6.80 mm 1U-8169 10.50 mm
1U-8143 3.90 mm 1U-8159 7.00 mm 1U-8170 11.00 mm
1U-8144 4.00 mm 1U-8160 7.50 mm 1U-8171 11.50 mm
1U-8145 4.10 mm 1U-8161 8.00 mm 1U-8172 12.00 mm
1U-8146 4.30 mm 1U-8162 8.20 mm 1U-8173 12.20 mm
1U-8147 4.50 mm 1U-8163 8.50 mm 1U-8174 12.50 mm
1U-8151 5.00 mm 1U-8164 8.60 mm

247
Metal Cutting — Drill Bits
Drill Bit Index - 4C-3385
Warranty: Manufacturer, 120 Day
• Empty drill bit index for storing 29 different sizes of jobber length drill bits from 1/
16 inch to 1/2 inch in 1/64 inch increments
• Typical use: left hand drill bits

Part Number Description

4C-3385 Drill Bit Index

Drill Extension - 4C-4426

Warranty: Cat Standard Warranty, 6 Months
• Extends drill reach 304.8 mm (12 in)
• Accepts up to 1/4 inch diameter shank

Part Number Description

4C-4426 Drill Extension

Recommended Drill Bit Sizes for Metric Thread

Warranty: Manufacturer, 120 Day

Thread Size Drill Bit Diameter Part Number Thread Size Drill Bit Diameter Part Number
M1.6 1.4 mm – M6 5.2 mm 1U-8152
M2 1.7 mm – M8 7.0 mm 1U-8159
M2.5 2.2 mm – M10 8.7 mm 1U-8165
M3 2.6 mm – M12 10.5 mm 1U-8169
M4 3.4 mm – M14 12.2 mm –
M5 4.3 mm 1U-8146 M20 18.0 mm 1U-8184

248
 Metal Cutting — Taps and Dies
Abbreviations Used for Taps and Dies

NF American National Fine Thread Series PD Pitch Diameters

NC American National Coarse Thread Series D5 Tolerance Limit of Ground Thread Metric Tap
NS American National Thread — Special D7 Tolerance Limit of Ground Thread Metric Tap
H1 Tolerance Limit of Ground Thread Tap D9 Tolerance Limit of Ground Thread Metric Tap
H2 Tolerance Limit of Ground Thread Tap NPT National Standard Pipe Form
H3 Tolerance Limit of Ground Thread Tap NPTT American Standard Dryseal Pipe Form

Hand Taps
Warranty: Manufacturer, 120 Day
• Made of high speed M-7 steel for longer life
• These are ground thread taps providing tolerance designed for Class 2 Thread, exceeds quality of carbon steel
taps
• Offered in tapered, plug and bottoming versions
Caterpillar offers five types of hand taps, available by individual part numbers and in sets (indexes).
• Machine screw
• Fractional
• Taper pipe
• Special thread taps
• Metric
Pitch
Nominal Size Diameter Number of
(in) Threads/Inch Limits Flutes Taper Plug Bottoming Thread Length Overall Length
3 56 NF H2 3 – 1P-3007 – 1/2 in 1 13/16 in
4 40 NC H2 3 4C-5008 1P-3008 4C-5015 9/16 in 1 7/8 in
5 40 NC H2 3 – 1P-3010 – 5/8 in 1 15/16 in
6 32 NC H3 3 4C-5009 1P-3012 4C-5016 11/16 in 2 in
8 32 NC H3 4 4C-5010 1P-3014 4C-5017 3/4 in 2 1/8 in
8 36 NF H2 4 – 1P-3015 – 3/4 in 2 1/8 in
10 24 NC H3 4 4C-5011 1P-3016 4C-5018 7/8 in 2 3/8 in
10 32 NF H3 4 4C-5012 1P-3017 4C-5019 7/8 in 2 3/8 in
12 24 NC H3 4 4C-5013 1P-3018 4C-5020 15/16 in 2 3/8 in
12 28 NC H3 4 4C-5014 1P-3019 4C-5021 15/16 in 2 3/8 in

249
Metal Cutting — Taps and Dies
Machine Screw Set - 1P-3020
Warranty: Manufacturer, 120 Day
• Contains plug taps from 0-80 through 12-28 in National Fine and
1-64 through 12-24 in National Coarse Threads
• Includes plastic index

Pitch
Nominal Threads/ Diameter Number of Thread Overall
Size (in) Inch Limits Flutes Taper Plug Description Bottoming Length Length
– – – – – 1P-3020 Complete Machine – – –
Screw Set
Machine Screw Set Consists of:
1 12 NF H4 4 4C-5006 1P-3040 Taps and Dies 4C-4988 2 1/2 in 5 1/8 in
1 14 NF H4 4 4C-5007 1P-7421 – 5P-3011 2 1/2 in 5 1/8 in
1 8 NC H4 4 4C-5005 1P-3039 Taps and Dies 4C-4987 2 1/2 in 5 1/8 in
1 1/16 12 NF H4 4 – 1U-6539 Taps and Dies – 2 1/2 in 5 1/8 in
1 1/2 12 NF H4 6 – 1P-3044 – – 3 in 6 3/8 in
1 1/4 12 NF H4 6 – 1P-3042 – – 2 9/16 in 5 3/4 in
1 1/4 7 NC – – – 4C-5051 Plug Tap 1 1/4-7-2B – 1 1/4 in –
1 1/8 12 NF H4 4 – 1P-3041 Taps and Dies 5P-3012 2 9/16 in 5 7/8 in
1 1/8 7 NC – 4 – 1U-9707 Plug Tap 1 1/8-7-2B – 2 1/2 in 5.4 in
1 3/8 12 NF H4 6 – 1P-3043 Taps and Dies 5P-3013 3 in 6 1/16 in
1 3/8 6 NC – – – 1U-9709 Plug Tap 1 3/8-6-2B – – –
1 5/16 12 NF H4 6 – 1U-6540 Taps and Dies – 2 9/16 in 5 3/4 in
1/2 13 NC H3 4 4C-4997 1P-3029 Taps and Dies 4C-4979 1 21/32 in 3 3/8 in
1/2 20 NF H3 4 4C-4998 1P-3030 Taps and Dies 4C-4980 1 21/32 in 3 3/8 in
1/4 20 NC H3 4 4C-4989 1P-3021 Taps and Dies 4C-4971 1 in 2 1/2 in
1/4 20 NF H3 4 4C-4990 1P-3022 Taps and Dies 4C-4972 1 in 2 1/2 in
2 1/2 in 12 NC H6 6 199-3947(1) 199-3947(2) Taper – 3 in 7 in
3/4 10 NC H3 4 4C-5001 1P-3035 Taps and Dies 4C-4983 2 in 4 1/4 in
3/4 12 NF – – – 2B-2526 Taps and Dies – – –
3/4 16 NF H3 4 4C-5002 1P-3036 Taps and Dies 4C-4984 2 in 4 1/4 in
3/8 16 NC H3 4 4C-4993 1P-3025 Taps and Dies 4C-4975 1 1/4 in 2 15/16 in
3/8 20 NF H3 4 4C-4994 1P-3026 Taps and Dies 4C-4976 1 1/4 in 2 15/16 in
5/16 18 NC H3 4 4C-4991 1P-3023 Taps and Dies 4C-4973 1 1/8 in 2 23/32 in
5/16 24 NF H3 4 4C-4992 1P-3024 Taps and Dies 4C-4974 1 1/8 in 2 23/32 in
5/8 11 NC H3 4 4C-4999 1P-3033 Taps and Dies 4C-4981 1 13/16 in 3 13/16 in
5/8 18 NF H3 4 4C-5000 1P-3034 Taps and Dies 4C-4982 1 13/16 in 3 13/16 in
7/16 14 NC H3 4 4C-4995 1P-3027 Taps and Dies 4C-4977 1 7/16 in 3 5/32 in
7/16 20 NF H3 4 4C-4996 1P-3028 Taps and Dies 4C-4978 1 7/16 in 3 5/32 in
7/8 14 NF H4 4 4C-5004 1P-3038 Taps and Dies 4C-4986 2 7/32 in 4 11/16 in
7/8 9 NC H4 4 4C-5003 1P-3037 Taps and Dies 4C-4985 2 7/32 in 4 11/16 in
9/16 12 NC H3 4 – 1P-3031 Taps and Dies – 1 21/32 in 3 19/32 in

1 Warranty: Caterpillar, Six Months

2 Not available for individual sale

250
 Metal Cutting — Taps and Dies
Machine Screw Set - 1P-3020 (Cont'd.)
Pitch
Nominal Threads/ Diameter Number of Thread Overall
Size (in) Inch Limits Flutes Taper Plug Description Bottoming Length Length
9/16 14 NF – – – 2B-9256(3) Taps and Dies – 1 21/32 in –
9/16 18 NF H3 4 – 1P-3032 Taps and Dies – 1 21/32 in 3 19/32 in

Fractional Size Tap Set - 1P-3070

• Contains 10 plug taps
• Includes plastic index

Nominal Size (inch) Threads Per Inch

1/4 20 NC
1/4 28 NF
5/16 18 NC
5/16 24 NF
3/8 16 NC
3/8 24 NF
7/16 14 NC
7/16 20 NF
1/2 13 NC
1/2 20 NF

Part Number Description

1P-3070 Fractional Size Tap Set

Fractional Size Tap Set - 1P-3050

Warranty: Manufacturer, 120 Day
• Contains 20 plug taps
• Includes 1P-3047 and 1P-3048 Tap Wrenches

Nominal Size (inch) Threads Per Inch Nominal Size (inch) Threads Per Inch Nominal Size (inch) Threads Per Inch
1/4 20 NC 7/16 14 NC 5/8 11 NC
1/4 28 NF 7/16 20 NF 5/8 18 NF
5/16 18 NC 1/2 13 NC 3/4 10 NC
5/16 24 NF 1/2 20 NF 3/4 16 NF
3/8 16 NC 9/16 12 NC 7/8 9 NC
3/8 24 NF 9/16 18 NF 7/8 14 NF

3 Not available for individual sale

251
Metal Cutting — Taps and Dies
Fractional Size Tap Set - 1P-3050 (Cont'd.)
Nominal Size (inch) Threads Per Inch Nominal Size (inch) Threads Per Inch
1 8 NC 1 14 NF

Part Number Description

1P-3050 Fractional Size Tap Set
Fractional Size Tap Set Includes:
1P-3047 Solid Handle Tap Wrench
1P-3048 Solid Handle Tap Wrench

Special Thread Taps

Warranty: Manufacturer, 120 Day
• Used for cleaning up damaged threads
• Not readily obtainable on the market because the threads are not common standards

Part Number Size Part Number Size

1P-7422 2 inch-12 UN 1U-9708 1 1/4 inch-7 Spiralock
1U-6600 1 1/8 inch-7 Spiralock 5P-3012 1 1/8 inch-12 NF Bottom
1U-6725 1 3/8 inch-12 Buttress Bottoming Tap (4) 6V-2091 3/8 inch-16 Spiralock (4)
1U-6726 1 3/4 inch-12 Buttress Bottoming Tap (4) 7S-7093 7/8 inch-12 UN

Rethreading Dies
• Caterpillar offers three types of rethreading dies, available by individual part number and in sets (indexes).
• Used to clean-up existing thread—not recommended to cut new threads
• Made of conventional carbon steel (unless otherwise specified)
• Conform to industry standards

Hexagon Rethreading Fractional Die Set - 1P-3000

Warranty: Manufacturer, 120 Day
• Contains 10 fractional, coarse thread dies
• Contains 10 fractional, fine thread dies
• Includes plastic index

4 Warranty: Caterpillar, Six Months

252
 Metal Cutting — Taps and Dies
Hexagon Rethreading Fractional Die Set - 1P-3000 (Cont'd.)
Dimensions across
Nominal Size (in) Threads/Inch Part Number Description flat Thickness
– – 1P-3000 Complete Hexagon Rethreading Fraction- – –
al Die Set
Hexagon Rethreading Fractional Die Set Consists of:
1 14 NS 3P-2213 Taps and Dies 13/16 in 1
1 8 NC 1P-2997 Taps and Dies 13/16 in 1 in
1/2 13 NC 1P-2987 Taps and Dies 1/16 in 1/2 in
1/2 20 NF 1P-2988 Taps and Dies 1/16 in 1/2 in
1/4 20 NC 1P-2979 Taps and Dies 19/32 in 1/4 in
1/4 28 NF 1P-2980 Taps and Dies 19/32 in 1/4 in
3/4 10 NC 1P-2993 Taps and Dies 7/16 in 3/4 in
3/4 16 NF 1P-2994 Taps and Dies 7/16 in 3/4 in
3/8 16 NC 1P-2983 Taps and Dies 25/32 in 3/8 in
3/8 24 NF 1P-2984 Taps and Dies 25/32 in 3/8 in
5/16 18 NC 1P-2981 Taps and Dies 11/16 in 5/16 in
5/16 24 NF 1P-2982 Taps and Dies 11/16 in 5/16 in
5/8 11 NC 1P-2991 Taps and Dies 1/4 in 5/8 in
5/8 18 NF 1P-2992 Taps and Dies 1/4 in 5/8 in
7/16 14 NC 1P-2985 Taps and Dies 7/8 in 7/16 in
7/16 20 NF 1P-2986 Taps and Dies 7/8 in 7/16 in
7/8 14 NF 1P-2996 Taps and Dies 5/8 in 7/8 in
7/8 9 NC 1P-2995 Taps and Dies 5/8 in 7/8 in
9/16 12 NC 1P-2989 Taps and Dies 1/16 in 1/2 in
9/16 18 NF 1P-2990 Taps and Dies 1/16 in 1/2 in
Optional Rethreading Fractional Dies
1 12 NF 1P-2998 Taps and Dies 13/16 in 1 in
1 1/2 12 NF 4C-5497 Taps and Dies 9/16 in 1 in
1 1/4 12 NF 4C-5495 Taps and Dies 3/16 in 1 in
1 1/8 12 NF 4C-5494 Taps and Dies 1 in 1 in
1 3/4 5 NF 5P-4238 Taps and Dies 1 in 1 1/4 in
1 3/8 12 NF 4C-5496 Taps and Dies 3/8 in 1 in
M10 x 1.25 – 8T-3069 Taps and Dies 7/8 in 7/16 in
M11 x 1.50 – 8T-3071 Taps and Dies 7/8 in 7/16 in
M12 x 1.25 – 8T-3072 Taps and Dies 1/16 in 1/2 in
M12 x 1.50 – 8T-3073 Taps and Dies 1/16 in 1/2 in
M13 x 1.50 – 8T-3075 Taps and Dies 1/16 in 1/2 in
M14 x 1.50 – 9F-9398 Taps and Dies – –
M15 x 1.50 – 8T-3076 Taps and Dies 1/4 in 5/8 in
M16 x 1.50 – 8T-3077 Taps and Dies 1/4 in 5/8 in
M4 x 0.70 – 8T-3062 Taps and Dies 19/32 in 1/4 in
M5 x 0.80 – 8T-3063 Taps and Dies 19/32 in 1/4 in
M7 x 1.00 – 8T-3065 Taps and Dies 11/16 in 5/16 in
M9 x 1.00 – 8T-3067 Taps and Dies 25/32 in 3/8 in
M9 x 1.25 – 8T-3068 Taps and Dies 25/32 in 3/8 in

253
Metal Cutting — Taps and Dies
Hexagon Rethreading Metric Die Set - 4C-4963
Warranty: Manufacturer, 120 Day
• Includes plastic index

Nominal Size (in) Part Number Description Dimensions across flat Thickness
– 4C-4963 Complete Hexagon – –
Rethreading Metric Die Set
Hexagon Rethreading Metric Die Set Consists of:
M10 x 1.50 8T-3070 Taps and Dies 7/8 in 7/16 in
M12 x 1.75 8T-3074 Taps and Dies 1 1/16 in 1/2 in
M14 x 2.00 4C-4961 Taps and Dies 1 1/16 in 1/2 in
M16 x 1.00 4C-4182(5) Taps and Dies(6) 1 1/4 in 7/16 in
M16 x 2.00 8T-3078 Taps and Dies 1 1/4 in 5/8 in
M20 x 2.50 4C-4962 Taps and Dies 1 5/8 in 7/8 in
M6 x 1.00 8T-3064 Taps and Dies 19/32 in 1/4 in
M8 x 1.25 8T-3066 Taps and Dies 11/16 in 5/16 in
Optional
M16 x 1.00 4C-4181 Taps and Dies 1 1/4 in 5/8 in
M30 x 3.50 4C-6722 Rethreading Die 2 3/16 in 1 in

Hexagon Rethreading Pipe Dies - Individual

Warranty: Manufacturer, 120 Day
Nominal Pipe Size (in) Threads/Inch Part Number Dimensions across flat Across Thickness
1/2 14 4C-4960 1 5/8 in 3/4 in
1/4 18 4C-4958 1 1/4 in 5/8 in
1/8 27 4C-4957 1 7/16 in 3/8 in
3/8 18 4C-4959 1 5/8 in 5/8 in

Special Rethreading Dies

Warranty: Manufacturer, 120 Day
• Used for cleaning up damaged external threads
• Not readily obtainable on the market because the threads are not common
standards
Part Number Size
1P-2998 1 in-12 UNF
5P-4238 1 3/4 in-5 NC
6V-7052 1 5/16 in-12 NF
9F-9398 14 mm x 1.5 mm Pitch

5 Not available for individual sale

6 Warranty: Caterpillar, Six Months

254
 Metal Cutting — Taps and Dies
Universal Outside Thread Chasers
Warranty: Cat Standard Warranty, 6 Months
• Precision dies restore threads to their original condition to make reassembly of
matching parts easier
• Eliminates the need for expensive thread-cutting equipment
• Tighten the tool slightly on the good threads, then back off over the damaged
thread area to restore the threads
• 1- 1/4 in to 5 in outer diameter

Part Number Per Capacity Description Weight

1U-7521 4, 5, 6, 7, 7 1/2 , 8, 9, 10, 11, 11 1/2 , 12, 14, 16, 18, 20, 24 Standard Thread Chaser (complete with 6 dies) 1.4 kg (3 lb)
1U-7610 1 mm-1.25 mm-1.5 mm-1.75 mm; 2 mm-2.5 mm; 3.0 Dies only (3 dies) 0.4 kg (0.99 lb)
mm-3.5 mm; 4 mm

Thread File Group - 154-9315

Warranty: Cat Standard Warranty, 6 Months
Model, 311, 312, 312B, 315B, and 318B Excavators (Grenoble Version)
Reference
RENR1113 Service Manual, 312B Excavators Machine Systems Disassembly and
Assembly
• Used to renew damaged external threads on any diameter shaft (right or left
handed)
• Cross-cut and thread proportional to thread pitch (helps eliminate file skipping or
jumping out of fine pitches)
• Each file has eight separate pitches
• Makes thread repairs without using a thread die
• Red plastic handle protects hands
• Each file is individually packaged in a plastic tube
• Carrying pouch keeps files together
• Files can also be ordered separately

Part Number Description Pitch

154-9315 Complete Thread File Group 9, 10, 12, 16, 20, 27, 28, and 32 tpi
Thread File Group Consists of:
154-9316 Metric Thread File 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, and 3.00
154-9317 Inch Thread File 11, 12, 13, 14, 16, 18, 20, and 24 tpi
154-9318 Inch Thread File 9, 10, 12, 16, 20, 27, 28, and 32 tpi
154-9319 Pipe Thread File 8, 10, 11 1/2 , 14, 16, 18, 24, and 27 tpi
160-1749 Roll-up Pouch –

255
Metal Cutting — Taps and Dies
Taper Pipe Tap Set - 2P-5530
Warranty: Manufacturer, 120 Day
NOTE: These are ground thread taps meeting requirements of right hand American
Standard Pipe Form (NPT) and American Standard Dryseal Pipe Form (NPTF). Dry-
seal taps are used to tap fittings which will give a pressure tight joint without use of
a "sealer".
• Contains 4 taper pipe taps 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPTF, shown
here
• Includes plastic index

Number of
Nominal Pipe Size (in) Threads/Inch Flutes Part Number Thread Length Overall Length
2P-5530 Set Contains
1/2 14 4 2P-5534 1 3/8 79.5 mm (3.13 in)
1/4 18 4 2P-5532 1 1/16 62 mm (2.44 in)
1/8 27 4 2P-5531 3/4 54.1 mm (2.13 in)
3/8 18 4 2P-5533 1 1/16 65 mm (2.56 in)
Taper Pipe Taps — Individual
1/16 27 4 4C-9747 – 54.1 mm (2.13 in)
3/4 14 5 214-3635 1 3/8 82.6 mm (3.25 in)

Metric Size Taps - Individual

Warranty: Manufacturer, 120 Day

Pitch Diameter Number of Pitch Diameter Number of

Nominal Size Limits Flutes Part Number Nominal Size Limits Flutes Part Number
Plugs M36 x 4 – 4 423-8713
M10 x 1.25 – 4 8T-3086 M36 x 4 D9 4 4C-4970
M10 x 1.50 D6 4 8T-3087 M4 x 0.7 – 4 8T-3079
M11 x 1.50 – 4 8T-3088 M42 x 4.5 D5 4 or 6 9U-6901
M12 x 1.25 – 4 8T-3089 M48 x 5 D5 6 9U-6503
M12 x 1.50 – 4 8T-3090 M5 x 0.8 D4 4 8T-3080
M12 x 1.75 D6 4 8T-3091 M6 x 1 D5 4 8T-3081
M13 x 1.50 – 4 8T-3092 M64 x 6.0 D5 4 or 6 9U-6902
M14 x 1.50 – 4 8T-3093 M7 x 1.0 – 4 8T-3082
M14 x 2 D7 4 4C-4965 M8 x 1.25 D5 4 8T-3083
M15 x 1.50 – 4 8T-3094 M9 x 1.0 – 4 8T-3084
M16 x 1.50 – 4 8T-3095 M9 x 1.25 – 4 8T-3085
M16 x 2 D7 4 8T-3096 Bottoming
M18 X 1.5 D6 4 9U-7283 M10 x 1 D6 4 4C-5894
M18 x 2.5 D7 4 4C-4966 M14 x 1 D7 4 4C-6924
M20 x 1.5 D7 4 9U-5794 M16 x 2 D6 4 4C-9645
M20 x 2.5 D7 4 4C-4967 M27 x 3 D6 4 386-3218
M22 x 1.5 D6 4 156-8166 M39 x 4 D6 6 386-3219
M24 x 3.0 D8 4 4C-4968 M42 x 3 D6 6 386-3220
M30 x 3.5 D9 4 4C-4969 M64 x 4 D6 6 386-3221

256
 Metal Cutting — Taps and Dies
Tap Wrenches
Warranty: Manufacturer, 120 Day
• Designed for use in hand tapping but can also be used with reamers, drills, screw
extractor or other hand cutting tools
• Jaws are made of carefully hardened and tempered steel
• Ruggedly built yet nicely furnished
• Caterpillar offers two types of tap wrenches:
• - T-Handle
• - Straight

Part Number Description Usage

4C-5026 Slip Handle The T-Handle may be "slipped" from side to side to permit a complete turn
in close quarters.
4C-5028 Long Shank The long shank permits tapping in hard to reach places encountered in
machine and automobile repair work.
4C-5029 Ratchet The combination of ratchet and slip handle make this an all around wrench
capable of handling most hand tapping jobs.
1P-3047 Solid Handle These wrenches have solid handles, one of which is forged integral with
the center. Adjustment is made by turning the movable handle.

Part Used with Machine Metric Pipe

Description Number Length Fractional Taps Screw Taps Taps Taps
T-Handle Tap Wrenches
Long Shank 4C-5028 222.2 mm (8.75 in) 1/16 in - 1/4 in 0-14 1 - 6 mm –
Ratchet 4C-5029 95.2 mm (3.75 in) 1/16 in - 1/4 in 0-14 1 - 6 mm –
Slip Handle 4C-5026 69.8 mm (2.75 in) 1/16 in - 1/4 in 0-14 1 - 6 mm –
Straight Tap Wrenches
Solid Handle Tap 1P-3047 279.4 mm (11 in) 5/32 in - 1/2 in 7-14 4 - 13 mm 1/8
Wrench
Solid Handle Tap 1P-3048 482.6 mm (19 in) 1/4 in - 1 1/8 in – 6 - 24 mm 1/8 - 3/4
Wrench

257
Metal Cutting — Extractors
Individual Extractors
Warranty: Manufacturer, 120 Day
• Useful in maintenance departments, machine shops, garages, workshops, etc., to
remove broken screws, bolts or other threaded parts
• First, drill a hole into the broken part. Insert the extractor. By twisting to the left,
the extractor will grip into the wall of the hole and the broken part can be backed
out without damaging threads.

Extractor Part Used with Used to

Size Number Drill Size Used to Remove Screws and Bolts Remove Pipe
Left Hand Spiral Tapered Flutes (Item 1)
1 4C-3364 5/64 2.5 mm - 6.0 mm (3/16 in - 1/4 in) –
2 4C-3365 7/64 6.0 mm - 8.0 mm (1/4 in - 5/16 in) –
3 4C-3366 5/32 8.0 mm - 12.0 mm (5/1 in - 7/16 in) –
4 4C-3367 1/4 12.0 mm - 14.0 mm (7/16 in - 9/16 in) –
5 4C-3368 17/64 14.0 mm - 20.0 mm (9/16 in - 3/4 in) 1/8 in
6 4C-3369 13/32 20.0 mm - 24.0 mm (3/4 in - 1 in) –
7 4C-3370 17/32 24.0 mm - 35.0 mm (1 in - 1 3/8 in) –
8 4C-3372 1 1/16 44.0 mm - 54.0 mm (1 3/4 in - 2 1/8 in) 1 in
Straight Tapered Flutes (Item 2)
1 4C-3374 9/64 in 2.5 mm - 8.0 mm (1/4 in - 5/16 in) –
2 4C-3375 3/16 in 9.0 mm - 10.0 mm (3/8 in) –
3 4C-3376 15/64 in 12.0 mm (7/16 in) 1/8 in
4 4C-3377 5/16 in 13.0 mm - 14.0 mm (1/2 in - 9/16 in) 1/4 in
5 4C-3378 3/8 in 15.0 mm - 16 mm (5/8 in) 3/8 in
6 4C-3380 9/16 in 22.0 mm (7/8 in) –

258
 Metal Cutting — Extractors
Extractor Sets
Warranty: Manufacturer, 120 Day

• For removing broken screws and bolts (eliminates redrilling and retapping for a larger screw)

Part Number Used to Remove Part Number Used to Remove

4C-3383 Extractor Set, Straight Tapered, Consists of: 4C-3365 5/32 in to 7/32 in
4C-3374 3/16 in to 5/16 in 4C-3366 7/32 in to 9/32 in
4C-3375 3/8 in 4C-3367 9/32 in to 3/8 in and 1/8 in Pipe
4C-3376 7/16 in and 1/8 in Pipe 4C-3368 3/8 in to 5/8 in and 1/4 in Pipe
4C-3377 1/2 in to 9/16 in and 1/4 in Pipe 4C-3369 5/8 in to 7/8 in and 3/8 in Pipe
4C-3378 5/8 in and 3/8 in Pipe 4C-5530 Extractor Set, Straight Tapered, Consists of:
4C-3379 3/4 in and 1/2 in Pipe 4C-3374 3/16 in to 5/16 in
4C-3382 Extractor Set, Left Hand Spiral, Consists of: 4C-3375 3/8 in
4C-3364 3/32 in to 5/32 in 4C-3376 7/16 in and 1/8 in Pipe
4C-3365 5/32 in to 7/32 in 4C-3377 1/2 in to 9/16 in and 1/4 in Pipe
4C-3366 7/32 in to 9/32 in 4C-3378 5/8 in and 3/8 in Pipe
4C-3367 9/32 in to 3/8 in and 1/8 in Pipe 4C-3384 Extractor Set, Left Hand Spiral, in vinyl pouch,
4C-3368 3/8 in to 5/8 in and 1/4 in Pipe Consists of:
4C-3364 3/32 in to 5/32 in
4C-3369 5/8 in to 7/8 in and 3/8 in Pipe
4C-3365 5/32 in to 7/32 in
4C-3370 7/8 in to 1 1/8 in and 1/2 in Pipe
4C-3366 7/32 in to 9/32 in
4C-3371 1 1/8 in to 1 3/8 in and 3/4 in Pipe
4C-3367 9/32 in to 3/8 in and 1/8 in Pipe
4C-3372 1 3/8 in to 2 in and 1 in Pipe
4C-3368 3/8 in to 5/8 in and 1/4 in Pipe
4C-3381 Extractor Set, Left Hand Spiral, Consists of:
4C-3364 3/32 in to 5/32 in

Left Hand Spiral Screw Extractor - 1B-9925

Warranty: Cat Standard Warranty, 6 Months
• Originally used for the removal of burner tubes in the D70, D65 Tractors and
D9900 Power Units
• Used to remove broken screws and bolts
• Eliminates redrilling and retapping for larger screw

Spiral Square Overall

Part Number Turn Length Taper/Foot Drive Length
1B-9925 1/2 in 1 3/4 in 1 3/8 in 5/8 in 10 1/2 in

259
Metal Cutting — Extractors
Extractor Set, 10 piece - 282-2108
SMCS Code: 0671
Warranty: Manufacturer, 120 Day
• Standard extractors for righthand pipe and studs
• Four-point grip assures strong bite
• Works with shallow grip which lessens expansion and jamming
• Pulls rather than reams
• Releases from bite instantly after job completed
• Designed for strength, durability, and easy handling
• Rust resistant, black oxide finish
• Complete set of only 10 extractors fits every size and class of pipe from 1/8 to 2
inch
• Also fits every stud and screw from 3/8 to 3 1/2 inch
• Comes in sturdy plastic case
• Can also be ordered individually

Part Number Description Broken Pipe Length (in) Broken Stud/Screw Length (in)
282-2108 Complete Extractor Set – –
Extractor Set Consists of:
282-2111 Extractor 3/8 5/8 or 3/4
282-2112 Extractor 1/2 –
282-2113 Extractor – 7/8 or 1
282-2115 Extractor 3/4 1 1/8 or 1 1/4
282-2116 Extractor 1 1 1/2 or 1 3/4

Stud Remover Set - 2P-5535

Warranty: Cat Standard Warranty, 6 Months
• Extractors are not threaded and thus will accommodate studs with either coarse
or fine threads
• Saves time when removing a number of studs and eliminates thread damage
Reference
GMG02078 Special Instruction

Item Part Number Description

– 2P-5535 Complete Stud Remover Set
Stud Remover Set Consists of:
1 – Extractor, 3/4 in
2 – Extractor, 7/8 in
3 2P-5529 Extractor, 1 in
4 2P-5497 Body
5 2P-5538 Bolt
6 2P-5537 Washer

260
 Metal Cutting — Extractors
Stud Remover and Resetter Tool Set, 1/4 through 5/8 in - 8S-1378
Warranty: Lifetime
Part Number Description Size
8S-1378 Complete Stud Remover and Resetter –
Tool Set, 1/4 through 5/8 in
Stud Remover and Resetter Tool Set, 1/4 through 5/8 in, Consists of:
8S-1346 Collet 5/8 in - 11
8S-1364 Box –
8S-1365 Collet 1/4 in - 20
8S-1366 Collet 1/4 in - 28
8S-1368 Collet 5/16 in - 24
8S-1369 Collet 3/8 in - 16
8S-1370 Collet 3/8 in - 24
8S-1371 Collet 7/16 in - 14
8S-1372 Collet 7/16 in - 20
8S-1373 Collet 1/2 in - 13
8S-1375 Collet 9/16 in - 12
8S-1376 Collet 9/16 in - 18
8S-1377 Collet 5/8 in - 18
Not Shown
8S-1347 Housing –
8S-1374 Collet 1/2 in - 20

261
Metal Cutting — Extractors
Metric Stud Installers
Essential Tool
Warranty: Lifetime
• Used to quickly and easily install metric studs (not for stud removal)
• Can be used with standard wrench or impact wrench
• Reduces possible damage to threads
• Designed to easily release from stud after installation
• Ensures reliable bolted joint (reduces chance of stud backout)

Part Number Size

204-7932 M16 x 2.0
204-7933 M20 x 2.5
204-7934 M24 x 3.0
204-7935 M30 x 3.5
204-7936 M36 x 3.0

262
 Metal Cutting — Cutting Torch Equipment
Mini Cutting Torch - 8T-7792
Warranty: Manufacturer, 30 Day
• Will cut cast iron, stainless steel, high alumina refractory, and slag
• Can be used indoors, because the noise and smoke levels are very low
• Faster and less expensive than carbon arc and requires oxygen only
• Durable, comfortable, and less fatiguing to use
• Large squeeze trigger-type handle control delivers oxygen precisely
• Excellent tool for gouging hard facing. Unlike carbon arc, the rods contain no car-
bon, thus reducing the grinding requirement
Reference
Form SEHS8923
Details
Rod Sizes Used by Mini Cutting Torch
General purpose rods for removing small bolts and pins by piercing
4.76 mm x 55.24 cm (3/16 in x 21 3/4 in)
6.35 mm x 55.24 cm (1/4 in x 21 3/4 in)
Rods for piercing track pins, washing away welds, and gouging hard facing
9.52 mm x 46.67 cm (3/8 in x 18 3/8 in)
Cut off and gouging rod for piercing longer pins and rough cutting
9.52 mm x 91.44 cm (3/8 in x 36 in)

Item Part Number Description

1 8T-7792 Complete Mini Cutting Torch
Mini Cutting Torch Consists of:
2 8T-9110 Washer
3 8T-7795 Collet, 4.76 mm ( 3/8 in)
4 8T-7794 Collet, 6.35 mm ( 1/4 in)
Not shown 8T-7793 Striker Plate
Not shown 8T-9202 Collet, 4.76 mm ( 3/16 in)
Not shown 8T-9287 Washer
Purchase separately
5 8T-7697 Rod, 9.52 mm x 914.4 mm ( 3/8 in x 36 in)
6 8T-7696 Rod, 6.35 mm x 55.24 cm ( 1/4 in x 21 3/4 in)
7 8T-7698 Rod, 4.76 mm x 45.72 cm ( 3/8 in x 18 in)
Not shown 8T-7699 Igniter
Not shown 8T-9201 Rod, 4.76 mm x 55.24 cm ( 3/16 in x 21 3/4 in)
Not shown 9U-5614 Shield
Not shown 9U-5615 Collet Nut-Brass

263
Metal Cutting — Miscellaneous
Surface Texture Replica (Comparison) - 9A-1593
Warranty: Cat Standard Warranty, 6 Months
• Used as a reference tool for metal surface reconditioning during reuse and sal-
vage of major components
• Provides user with a physical representation of surface finish specifications that
are called out in Reuse and Salvage Guidelines
• Provides 12 examples of F, H, K, and N surface textures for cast iron and steel
Reference
SEBF8271, Guideline for Reusable Parts

Part Number Description

9A-1593 Metal Surface Texture Replica

Metal Etching Pen

Warranty: Cat Standard Warranty, 6 Months
• Leaves distinctive, smudge-proof, black markings
• Indispensable anyplace where metals, hardened or thin-walled, have to be marked
or identified
• Strong effect on heavy metals, stainless steel, iron, copper, brass, nickel, tin, lead
• No electrical flux necessary; special acid solution flows like ink in a felt-tip pen
and a permanent etch is produced on the metal
• Ideal for toolroom use and marking in the machine shop
• Apply on clean surface; after application wipe dry with oily cloth.

Part Number Description

9U-7377 Metal Etching Pen

264
 Metal Repair
Full-Torque® Thread Repair Kits
• Unique threaded insert design repairs damaged threaded holes in
cast and ductile iron, steel, and aluminum
• Spiralhook™ threads engage tapped hole and draw surrounding
metal into threads, as bolt or stud is torqued, resulting in a stron-
ger repair
• Thread Repair Solid Plug inserts allow off-center and custom-size
thread repairs
• Viable alternative to welding cast and ductile iron, steel, and
aluminum
• In many cases parts can be repaired without disassembly
• Six kits with individual written installation instructions for a wide
range of repair solutions

Part Number Description Qty. Part Number Description Qty.

263-7140 - Thread Repair Kit: 1-8 Thread Insert Kit for ductile iron in 263-7158 Finish Tap 1
Off-Highway Truck and Wheel Loader wheels; can also be used on 263-7165 Installation Tool 1
steel fabricated and cast wheels
263-7173 Thread Insert, M30 5
263-7160 Drill Bit, 1 9/64 inch
263-7178 Drill Bit, 1 25/64 inch 1
263-7161 Rough Tap 1
263-7179 Drill Fixture 1
263-7162 Finish Tap 1
263-7144 - M36 Thread Insert Kit for ductile iron housing on 797 Off-
263-7170 Installation Tool 1 Highway Truck wheels; also used for repairing 797 front axle steer-
263-7173 Thread Insert, M30 5 ing bracket mounting holes
263-7145 - M20 Thread Insert Kit for repair of 3116 block head bolt 263-7155 Rough Tap 1
holes Finish Tap
263-7156 1
263-7174 Thread Insert, M20 5
263-7163 Installation Tool 1
263-7180 Drill Bit, 57/64 inch 1
263-7164 Thread Insert, M36 5
263-7181 Rough Tap 1
263-7172 Drill Bit, 1 41/64 inch 1
263-7182 Finish Tap 1
263-7179 Drill Fixture 1
263-7183 Installation Tool 1
263-7146 - Thread Repair Solid Plug Insert Kit for drilling and tap-
263-7141 - M24 Thread insert Kit for ductile iron in Off-Highway ping off-center and custom-size threaded holes; used for repairing
Truck and Wheel Loader wheels; can also be used on steel fabri- 797 differential retaining bolt holes in thrust washer halves (1)
cated and cast wheels
263-7175 Solid Plug Insert 5
263-7160 Drill Bit, 1 9/64 inch 1
263-7177 Spotfacer 1
263-7161 Rough Tap 1
263-7255 Rough Tap 1
263-7162 Finish Tap 1
263-7256 Finish Tap 1
263-7167 Installation Tool 1
263-7258 Tapping Fluid 1
263-7168 Thread Insert, M24 5
263-7142 - M30 Thread Insert Kit for ductile iron housing on 797 Off- 263-7259 Thread Sealant 1
Highway Truck wheels 263-7260 Drill Bit, 21/32 inch 1
263-7157 Rough Tap 1

1 Maximum I.D. thread size of original threaded hole is 1/2 inch

265
Metal Repair
263-7147 Lock-N-Stitch® Crack Repair Kit
• Unique threaded stitching pins and locks repair cracks in cast and ductile
iron, steel, or aluminum castings
• L-Series Stitching Pins use an interference fit to seal pressure tight and
can be installed at steep angles
• C-Series Stitching Pins feature Spiralhook™ threads to produce drawing
pressure that pulls sides of the crack together for strength
• Locks installed across a crack; drill jigs create precise hole patterns
across cracks in castings; locks driven into hole patterns creating addi-
tional strength
• Cold process—viable alternative to welding
• In many cases parts can be repaired without disassembly
• Extensive kit features specialized tools, complete instructions including
six DVDs covering all aspects of crack repair, and storage case
• Provides a wide range of repair solutions

Part Number Description Qty. Part Number Description Qty.

263-7147 Crack Repair Kit – 263-7210 Stitch Pin, 9.5 mm (.375 in) length 100
Tools 263-7211 Stitch Pin, 12.7 mm (.500 in) length 100
263-7184 Magcheck™ Kit 1 263-7212 Stitch Pin, 19 mm (.750 in) length 100
263-7190 Pneumatic Tapping Tool 1 263-7213 Stitch Pin, 28.6mm (1.125 in) length 100
263-7249 ® 1
Trim-Kut 3 inch Discs (includes 1/4 10 263-7215 Finishing Tap, fine
inch mandrel) 263-7216 Bottom Tap, fine 1
263-7253 Large Collet for 263-7190 1 263-7217 Spotfacer 1
263-7254 Quick Change Tap Adapter 1 263-7218 Drill Stop 1
"L" Series Stitching Pins, 6.3 mm (.248 in) Thread Diameter "C" Series Stitching Pins, 9.5 mm (.375 in) Thread Diameter
263-7193 Stitch Pin, 6.3 mm (.250 in) length 100 263-7219 Stitch Pin, 15.9 mm (.625 in) length 25
263-7194 Stitch Pin, 9.5 mm (.375 in) length 100 263-7220 Stitch Pin, 22.2 mm (.875 in) length 25
263-7195 Stitch Pin, 15.9 mm (.625 in) length 100 263-7221 Stitch Pin, 34.9 mm (1.375 in) length 25
263-7196 Stitch Pin, 25.4 mm (1.00 in) length 100 263-7222 Stitch Pin, 50.8 mm (2.00 in) length 25
263-7197 Drill Bit, wire size 7 2 263-7223 Rough Tap 1
263-7198 Starting Tap 1 263-7224 Bottom Tap 1
263-7199 Bottom Tap 1 263-7225 Bottom Tap 1
263-7200 Piloted Tap 1 263-7226 Drill Bit, letter size O 2
263-7201 Drilling Jig 1 263-7227 Spotfacer 1
"L" Series Stitching Pins, 8.3 mm (.326 in) Thread Diameter 263-7228 Drill Stop 1
263-7202 Stitch Pin, 6.3 mm (.250 in) length 100 263-7251 Drilling Jig 1
263-7203 Stitch Pin, 12.7 mm (.500 in) length 100 Lock, 20 mm (.793 in) Long
263-7204 Stitch Pin, 25.4 mm (1.00 in) length 100 263-7230 Lock, 3.2 mm (.125 in) thick 10
263-7205 Starting Tap 1 263-7232 Drill Bit, wire size 15 3
263-7206 Bottom Tap 1 263-7233 Drill Stop 1
263-7207 Piloted Tap 1 263-7234 Drilling Jig 1
263-7208 Drill Bit, letter size L 2 Lock, 36 mm (1.409 in) Long
263-7250 Drilling Jig 1 263-7235 Bottom Lock, 2 mm (.080 in) thick 10
"C" Series Stitching Pins, 6.0 mm (.233 in) Thread Diameter 263-7236 Surface Lock, 4 mm (.160 in) thick 10
263-7197 Drill Bit, wire size 7 2 263-7238 Drill Bit Set, 1/8 and 3/16 inch 3 each
263-7201 Drilling Jig 1 263-7239 Drilling Jig 1
263-7209 Stitch Pin, 6.3 mm (.250 in) length 100 263-7240 Drill Stop, 1/8 inch 1

266
 Metal Repair
263-7147 Lock-N-Stitch Crack Repair Kit (Cont'd.)
Part Number Description Qty. Part Number Description Qty.
263-7241 Drill Stop, 3/16 inch 1 263-7243 Surface Lock, 9.5 mm (.375 in) thick 5
Lock, 48 mm (1.877 in) Long 263-7244 Drill Bit Set, 1/8 and 1/4 inch 3 each
263-7240 Drill Stop, 1/8 inch 1 263-7245 Drilling Jig 1
263-7242 Bottom Lock, 5 mm (.190 in) thick 10 263-7246 Drill Stop, 1/4 inch 1

Heli-Coil® Inserts

• Effective and universally accepted method of thread repair

• Quickly and permanently restore stripped, worn or damaged threads to their original size and condition
• Inserts work in any material: aluminum, magnesium, cast iron, bronze, etc.
• Increasing use of lightweight (and soft) materials means more thread damage—there is a Heli-Coil repair for virtu-
ally every application
• Stainless steel
• Provide leak tight joints (ex. spark plugs)
Stainless Steel Heli-Coil inserts eliminate:
• Thread wear
• Corrosion
• Galling
• Rust
and provide...
• Stronger assemblies
• High quality and reliability
• Fastening integrity superior to the original

267
Metal Repair
Master Thread Repair Sets
Warranty: Manufacturer, One Year
Master Thread Repair Sets
• Both sets contain repairs for the most commonly used thread sizes
• Two Master Sets for inch sizes are available: one for Inch Coarse (4C-8364) and
one for Inch Fine (4C-8365)
• The coarse set contains six sizes: 1/4 inch, 5/16 inch, 3/8 inch, 7/16 inch, 1/2 inch
and 5/8 inch
• The fine set has six sizes: #10, 1/4 inch, 5/16 inch, 3/8 inch, 7/16 inch and 1/2 inch
• Each set has a drill, tap, installation tool, a quantity of inserts for each size, and
complete instructions

Optional Inch Coarse Thread Repair Kits

• Kits include insert, tap, installation tool, tang break-off tool, and drill
• Tang break-off tool included in 1/4 -20 through 1/2 -13 only
• Insert package contains inserts only

Optional Inch Fine Thread Repair Kits

• Kits include insert, tap, installation tool, tang break-off tool, and drill
• Tang break-off tool included in 10-32 through 1/2 -20 only
• Insert package contains inserts only

NOTE:
Installation tools, prewinder and mandrel included in Fine Series only.

Installation
Insert Package Tap Part Tool Part Inserts/ Insert Package Drill Part
Thread Size x Length Part Number Qty. Number Drill Size Number Kit Part Number Number
4C-8364 - Inch Coarse Master Thread Repair Set
1/2 in-13 x .750 in 4C-8423 6 4C-9685 17/32 in 8T-2706 – – –
1/4 in-20 x .375 in 4C-8419 12 – 17/64 in 8T-2692 – – –
3/8 in-16 x .562 in 4C-8421 12 4C-9683 25/64 in 8T-2698 – – –
5/16 in-18 x .469 in 4C-8420 12 4C-9682 21/64 in 8T-2695 – – –
5/8 in-11 x.938 in 4C-8425 6 4C-9686 21/32 in 6V-9083 – – –
7/16 in-14 x .656 in 4C-8422 6 – 29/64 in – – – –
4C-8365 - Inch Fine Master Thread Repair Set
1/2 in-20 x .750 in 4C-8438 6 4C-9692 33/64 in 8T-2742 – – –
1/4 in-28 x .375 in 4C-8434 12 – 17/64 in 8T-2730 – – –
10-32 x .285 in 4C-8433 12 4C-9687 13/64 in 8T-2727 – – –
3/8 in-24 x .562 in 4C-8436 12 – 25/64 in – – – –
5/16 in-24 x .469 in 4C-8435 12 4C-9689 21/64 in – – – –
7/16 in-20 x .656 in 4C-8437 6 4C-9691 29/64 in – – – –
Optional Inch Coarse Thread Repair Kits
1 1/2 -6 x 2.250 – 1 4C-9720 1 17/32 – 4 4C-8432 –
1 1/4 -7 x 1.875 4C-8379 1 4C-9721 1 9/32 8T-2721 4 4C-8430 –
1 1/8 -7 x 1.688 4C-8378 1 4C-9722 1 5/32 8T-2718 5 4C-8429 1U-5702
1-8 x 1.500 4C-8377 1 – 1 1/32 8T-2715 6 4C-8428 1U-5698

268
 Metal Repair
Master Thread Repair Sets (Cont'd.)
Installation
Insert Package Tap Part Tool Part Inserts/ Insert Package Drill Part
Thread Size x Length Part Number Qty. Number Drill Size Number Kit Part Number Number
1/2 -13 x .750(2) 4C-8372 6 4C-9685 17/32 8T-2706 12 4C-8423 1U-5682
1/4 -20 x .375(2) 4C-8368 12 4C-9681 17/64 8T-2692 24 4C-8419 1U-5634
3/4 -10 x 1.125 4C-8375 4 4C-9725 25/32 – 4 4C-8426 1U-5690
3/8 -16 x .562(2) 4C-8370 12 4C-9683 25/64 8T-2698 12 4C-8421 1U-5642
5/16 -18 x .469(2) 4C-8369 12 4C-9682 21/64 8T-2695 24 4C-8420 1U-5638
5/8 -11 x .938(2) 4C-8374 6 4C-9686 21/32 6V-9083 6 4C-8425 1U-5686
7/16 -14 x .656(2) 4C-8371 6 4C-9684 29/64 – 12 4C-8422 1U-5646
7/8 -9 x 1.312 4C-8376 1 4C-9724 29/32 8T-2712 6 4C-8427 1U-5694
9/16 -12 x .844 4C-8373 6 4C-9700 19/32 – 6 4C-8424 1U-5684
Optional Fine Thread Repair Kits
1 1/2 -12 x 2.250 4C-8397 1 – 1 17/32 8T-2760 4 4C-8447 –
1 1/4 -12 x 1.875 4C-8395 1 4C-9707 1 9/32 – 4 4C-8445 –
1 1/8 -12 x 1.688 4C-8394 1 4C-9706 1 5/32 – 5 4C-8444 1U-5702
1 3/8 -12 x 2.062 4C-8396 1 – 1 13/32 – 4 4C-8446 –
1-14 x 1.500 4C-8392 1 4C-9704 1 1/64 8T-2751 6 4C-8442 4C-8483
1/2 -20 x .750(2) 4C-8387 6 4C-9692 33/64 8T-2742 12 4C-8438 1U-7433
1/4 -28 x .375(2) 4C-8383 12 4C-9688 17/64 8T-2730 24 4C-8434 1U-5634
10-32 x .285(2) – 12 4C-9687 13/64 8T-2727 24 4C-8433 1U-5630
3/4 -16 x 1.125 4C-8390 4 4C-9702 49/64 6V-9082 4 4C-8440 4C-8481
3/8 -24 x .562(2) 4C-8385 12 4C-9690 25/64 – 12 4C-8436 1U-5642
5/16 -24 x .469(2) – 12 4C-9689 21/64 – 24 4C-8435 1U-5638
5/8 -18 x .938 4C-8389 6 – 41/64 – 6 4C-8439 4C-8480
7/16 -20 x .656(2) 4C-8386 6 4C-9691 29/64 – 12 4C-8437 1U-5646
7/8 -14 x 1.312 4C-8391 1 4C-9703 57/64 8T-2748 6 4C-8441 4C-8482
9/16 -18 x .844 4C-8388 6 4C-8469 37/64 4C-8486 6 4C-8497 1U-7434

Metric Master Thread Repair Set - 4C-8366

Warranty: Manufacturer, One Year
• Contains repairs for the most commonly used thread sizes: M5, M6, M8 and M10 x 1.50
• Set has a drill bit, tap, installation tool, a quantity of inserts for each size, and complete instructions

Installation
Tap Part Tool Part
Thread Size x Length Part Number Description Qty. Number Drill Size Number
– 4C-8366 Complete Metric Master – – – –
Thread Repair Set
Metric Master Thread Repair Set Consists of:
M10 x 1.515.0 4C-8452 Threaded Inserts 12 4C-9730 13/32 8T-2793
M5 x 0.8 7.5 4C-8448 Threaded Inserts 12 4C-9727 13/64 8T-3121
M6 x 19.0 4C-8449 Threaded Inserts 12 – 1/4 8T-2784
M8 x 1.25 12.0 4C-8451 Threaded Inserts 12 – 21/64 8T-2790

2 Also included in Master Thread Repair Set - 4C-8365

269
Metal Repair
Metric Master Thread Repair
Warranty: Manufacturer, One Year
• Contains repairs for the most commonly used thread sizes: M5, M6, M8 and M10 x 1.25
• Set has a drill bit, tap, installation tool, a quantity of inserts for each size, and complete instructions

Installation
Thread Size x Part Tap Part Tool Part Insert Package Drill Part
Length Number Qty. Number Drill Size Number Inserts/Kit Part Number Number
M10 x 1.25 15.0 4C-8410 12 4C-9715 13/32 8T-2763 12 4C-8460 1U-5643
M5 x 0.8 7.5 4C-8448 12 4C-9727 13/64 8T-3121 – – –
M6 x 19.0 4C-8449 12 – 1/4 8T-2784 – – –
M8 x 1.25 12.0 4C-8451 12 4C-8475 21/64 8T-2790 – – –

Metric Thread Repair Kits

Warranty: Manufacturer, One Year
Metric Coarse Thread Repair Kits
• Kits include insert, tap, installation tool, tang break-off tool, and drill
• Tang break-off tool included in M5 through M12 only

Metric Fine Thread Repair Kits

• Kits include insert, tap, installation tool, tang break-off tool, and drill
• Tang break-off tool included in M5 through M12 only

Thread Size x Part Tap Part Drill Installation Tool Insert Package
Length Number Qty. Number Size Part Number Inserts/Kit Part Number Drill Part Number
Metric Coarse Thread Repair Kits
M5 x 0.8 7.5 (3) (4) 4C-8398 12 4C-9727 13/64 8T-3121 12 4C-8448 1U-5630
M6 x 1 9.0 (3) (4) 4C-8399 12 – 1/4 8T-2784 12 – 1U-5633
M7 x 1 10.5 4C-8400 12 – 9/32 – 12 4C-8450 1U-5635
M8 x 1.25 12.0 (3) (4) 4C-8401 12 4C-8475 21/64 8T-2790 12 4C-8451 1U-5638
M10 x 1.5 15.0 (3) 4C-8402 12 4C-9730 13/32 8T-2793 12 4C-8452 1U-5643
M12 x 1.75 18.0 4C-8403 6 4C-9731 15/32 8T-2796 12 4C-8453 1U-5647
M14 x 2 21.0 4C-8404 6 4C-8472 37/64 4C-8489 12 4C-8454 1U-7434
M16 x 2 24.0 4C-8405 6 4C-9732 21/32 8T-2799 6 4C-8455 1U-5686
M18 x 2.5 27.0 4C-8406 6 4C-8473 47/64 – 6 4C-8456 –
M20 x 2.5 30.0 4C-8407 3 4C-8474 13/16 4C-8491 4 4C-8457 1U-5691
Metric Fine Thread Repair Kits
M10 x 1 15.0 4C-8409 12 – 13/32 – 12 4C-8459 1U-5643
M10 x 1.25 15.0 4C-8410 12 4C-9715 13/32 8T-2763 12 4C-8460 1U-5643
M12 x 1.25 18.0 4C-8411 6 4C-9716 15/32 – 12 4C-8461 1U-5647
M12 x 1.5 18.0 4C-8412 6 4C-9717 15/32 – 12 4C-8462 1U-5647
M14 x 1.5 21.0 4C-8413 6 4C-9718 9/16 8T-2772 12 4C-8463 1U-5683
M16 x 1.5 24.0 4C-8414 6 – 21/32 8T-2775 6 4C-8464 1U-5686
M18 x 1.5 27.0 4C-8415 6 4C-8477 23/32 – 6 4C-8465 1U-5688

3 Also included in 4C-8366 Master Thread Repair Set

4 Also included in 4C-8367 Master Thread Repair Set

270
 Metal Repair
Spark Plug Thread Repair
Warranty: Manufacturer, One Year
Preferred method of repair specified by virtually all U.S. and foreign vehicle
manufacturers.
• Kits are available in sizes M14, M18, and 7/8 inch
• Each kit contains a piloted tap (no drilling necessary), an installation tool, and a
quantity of inserts
• The M14 Kit contains several insert lengths to accommodate all spark plug
reaches

Tap Part Installation Tool Part

Thread Size Reach Part Number Inserts/Kit Number Number Qty.
Kit Part Numbers
14 - 1.25 mm 3/8 in 4C-8416 6 – – 6
18 - 1.50 mm 1/2 in 4C-8417 24 4C-8478 – 6
7/8 in - 18 1/2 in - 5/8 in 4C-8418 10 4C-8479 4C-8496 5
Insert Package Part Numbers for 4C-8416
14 - 1.25 mm (5) .472 in 9U-5125 (6) 6 – – 6
14 - 1.25 mm (5) 1/2 in 9U-5123 6 8T-2801 8T-2802 6
14 - 1.25 mm (5) 3/4 in 9U-5124 6 – – 6
14 - 1.25 mm (5) 3/8 in 9U-5121 6 – – 6
14 - 1.25 mm (5) 7/16 in 9U-5122 6 – – 6
Insert Package Part Number for 4C-8417
18 - 1.50 mm 1/2 in 4C-8466 24 – – 6
Insert Package Part Number for 4C-8418
7/8 - 18 in 1/2 in - 5/8 in 4C-8467 (6) 10 – – 5

Carded Inserts
Warranty: Manufacturer, One Year
• Inserts are carded according to thread size for easy handling and display
• Contained in a vial marked with part number, thread size, and length
• The length of insert in Inch and Metric packages is 1 1/2 times the diameter of the
bolt—providing sufficient strength in most applications
• Spark Plug Inserts are packaged in lengths corresponding to the various spark
plug reaches

Thread Size Thread Length Part Number Qty. Thread Size Thread Length Part Number Qty.
Inch Coarse 1 1/8-7 1.688 4C-8429 1
1 1/2-6 2.250 4C-8432 1 1 3/8-6 2.062 4C-8431 1
1 1/4-7 1.875 4C-8430 1 1-8 1.500 4C-8428 1

5 Warranty: Manufacturer, 30-Day

6 Not available for individual sale

271
Metal Repair
Carded Inserts (Cont'd.)
Thread Size Thread Length Part Number Qty. Thread Size Thread Length Part Number Qty.
1/2-13 .750 4C-8423 6 M10 x 1.5 15.0 4C-8452 12
1/4-20 .375 4C-8419 12 M12 x 1.75 18.0 4C-8453 6
3/4-10 1.125 4C-8426 4 M14 x 2 21.0 4C-8454 6
3/8-16 .562 4C-8421 12 M16 x 2 24.0 4C-8455 6
5/16-18 .469 4C-8420 12 M18 x 5.25 27.0 4C-8456 6
5/8-11 .938 4C-8425 6 M20 x 5.25 30.0 4C-8457 3
7/16-14 .656 4C-8422 6 M5 x 0.8 7.5 4C-8448 12
7/8-9 1.312 4C-8427 1 M6 x 1 9.0 4C-8449 12
M7 x 1 9.0 4C-8450 12
9/16-12 .844 4C-8424 6
M8 x 1.25 12.0 4C-8451 12
Inch Fine
Metric Fine
1 1/2-12 2.250 4C-8447 1
M10 x 1 15.0 4C-8459 12
1 1/4-12 1.875 4C-8445 1
M10 x 1.25 15.0 4C-8460 12
1 1/8-12 1.688 4C-8444 1
M12 x 1.25 18.0 4C-8461 6
1 3/8-12 2.062 4C-8446 1
M12 x 1.5 18.0 4C-8462 6
1-12 1.500 4C-8443 1
M14 x 1.5 21.0 4C-8463 6
1-14 1.500 4C-8442 1
M18 x 1.5 27.0 4C-8465 6
1/2-20 .750 4C-8438 6
M8 x 1 12.0 4C-8458 12
1/4-28 .375 4C-8434 12
Spark Plug
3/4-16 1.125 4C-8440 4
14 - 1.25 mm (7) 1/2 in 9U-5123 6
3/8-24 .562 4C-8436 12
14 - 1.25 mm(7) 3/4 in 9U-5124 6
5/8-15 .938 4C-8439 6
14 - 1.25 mm(7) 3/8 in 9U-5121 6
7/16-20 .656 4C-8437 6
14 - 1.25 mm(7) 7/16 in 9U-5122 6
7/8-14 1.312 4C-8441 1
18 - 1.50 mm 1/2 in 4C-8466 6
9/16-18 .844 4C-8497 6
Metric Coarse

7 Warranty: Manufacturer, 30 Day

272
 Metal Repair
Inserts for Specific Engine Applications
Warranty: See individual part number
Engine Bore Size Sleeve
mm (inch) Drill Size Thread Size Tap Tap Guide Pre-Winder Assembly Insert Nib
95.29 (3.75) 1.0 in 8F-5574 9F-7143
101.60 (4.00) 1.0 in 9F-7143
107.95 (4.25) 1 1/8 in 8F-5577 8F-5575 9F-7143 8F-5574
114.30 (4.50) 1 1/8 in 8F-5577 9F-7143 8F-5574
101.60 (4.00) 51/64 in 3/4 -12 9F-7143 8M-8292
114.30 (4.50) 51/74 in 3/4 -12 9F-7143 8M-8292
114.30 (4.50) 29/32 in 7/8 -12 9M-6595 9F-7143 9M-6593 9M-6596
114.30 (4.50) 29/32 in 9M-6595 8S-6400

Thread Size x Length Part Number Tap Part Number Installation Tool Part Number
Special Length Inserts
3/4-16 x 1.500 (8) 6V-9074 4C-9702 6V-9082
5/8-11 x 1.250 (8) 6V-9076 4C-9686 6V-9083
M16-2 x 32 mm (9) 9U-5604 4C-9732 8T-2799
M8-1.25 x 16 mm (9) 9U-5177 4C-8475 8T-2790

Inserts for Specific Engine Applications

Warranty: Manufacturer, One Year

Sleeve
Engine Bore Size mm (inch) Drill Size Thread Size Tap Assembly Insert Nib
120.65 (4.75) V8 29/83 in 9M-6595 8S-6034 8S-6400
120.65 (4.75) 2-Valve 29/32 in 9M-6595 8S-6034 8S-6400
130.75 (5.12) 1 1/8 in 8F-5577 9F-7143 5H-8146
130.75 (5.12) Series F 1.0 in 9F-7143
137.31 (5.40) D343, 1693 90deltaV8 29/32 in 7/8 - 12 9M-6595 9F-7143 9M-6593 9M-6595
137.31 (5.40) 3400 Series 29/32 in 7/8 - 12 9M-6595 9F-7143 8S-6400 9M-6595
137.31 (5.40) 60deltaV8, V12, V16 29/32 in 7/8 - 12 9M-6595 9F-7143 9M-6593 9M-6595
146.05 (5.75) 1 1/4 in 1 1/4 - 12 9F-7143 8F-5575
146.05 (5.75) 1 1/8 in 1 1/8 - 12 8F-5577 9F-7143 5H-8146
158.75 (6.25) 1.0 in 1 -12 9F-7143 8S-6402

Insert Thread Size Tap Part Number

5H-8146 1 1/8 - 12 8F-5577
8F-5575 1 1/4 - 12 (10) –
8S-6400 7/8 - 12 9M-6595
8S-6402 1 - 12 –
9M-6593 7/8 - 12 (9) 9M-6595

8 Warranty: Manufacturer, One Year

9 Warranty: Manufacturer, 30-Day
10 Warranty: Caterpillar, Six Months

273
Metal Repair
Thread Inserts
Strong, permanent, metal threads — coarse or fine
Master kits contain a selection of various size inserts, drivers, and complete instruc-
tions in one package. These master kits provide convenient storage and easy ac-
cess to inserts and driver tools.

Refill kits contain only one size of thread insert and instructions (no driver tool).
• Installed with standard drills and taps
• No pre-winder tool required
• Impossible to cross thread while installing
• No tang to break-off
• Positive mechanical lock against rotation
• May be used in virtually any material including aluminum, magnesium, cast iron,
cold rolled steel, or plastic
• Provides high strength, reliability, and maximum pullout strength
• Easy to remove
• No special skills required—installation procedures can be learned in minutes

Typical Applications
• Buses
• Trucks
• Heavy equipment
• Marine equipment
• Machinery
• Tooling
• Power tools
• Recreational vehicles
• Small engines

Easy Installation/Four Simple Steps

1. Drill out old threads using specified drill size.
2. Tap new threads using specified tap size.
3. Screw in insert until slightly below surface. Lock-tabs act as depth stop.
4. Drive lock-tabs into the surrounding base material with several light taps on in-
stallation tool to securely lock the insert against rotation.

English Thread Insert Removal Data

Internal Thread Size Drill Size Drill Depth Drill Part No.
10-24 9/32 in 3.2 mm (.12 in) 1U-5603
10-32
1/4 -20 11/32 in 4.8 mm (.19 in) 1U-5607
1/4 -28
5/16 -18 13/32 in 4.8 mm (.19 in) 1U-5611
5/16 -24

274
 Metal Repair
Thread Inserts (Cont'd.)
English Thread Insert Removal Data
Internal Thread Size Drill Size Drill Depth Drill Part No.
3/8 -16 15/32 in 4.8 mm (.19 in) 1U-5615
3/8 -24
7/16 -14 17/32 in 4.8 mm (.19 in) 1U-5682
7/16 -20
1/2 -13 21/32 in 4.8 mm (.19 in) 1U-5686
1/2 -20
9/16 -12 21/32 in 4.8 mm (.19 in) 1U-5686
9/16 -18
5/8 -11 25/32 in 4.8 mm (.19 in) 1U-5690
5/8 -18
3/4 -10 31/32 in 7.9 mm (.31 in) 1U-5696
3/4 -16
7/8 -9 1 3/32 in 7.9 mm (.31 in) 1U-5700
7/8 -14
1-8 1 7/32 in 7.9 mm (.31 in) –
1-14
1 1/8 -7 1 11/32 in 7.9 mm (.31 in) –
1 1/8 -12
1 1/4 -7 1 15/32 in 7.9 mm (.31 in) –
1 1/4 -12
1 1/2 -6 1 23/32 in 7.9 mm (.31 in) –
1 1/2 -12
Metric Thread Insert Removal Data
Internal Thread Size Drill Size Drill Depth Drill Part No.
M6 7.50 mm 4.3 mm (.17 in) 1U-8160
M8 9.50 mm 4.3 mm (.17 in) 1U-8167
M10 11.50 mm 4.3 mm (.17 in) 1U-8171
M12 13.50 mm 4.3 mm (.17 in) 1U-8171
M16 17.75 mm 6.3 mm (.25 in) –
M20 25.75 mm 6.3 mm (.25 in) –
M24 28.75 mm 6.3 mm (.25 in) –

275
Metal Repair
English and Metric Thread Insert Master Kits
Warranty: Manufacturer, 90 Day
• Solid key-locking inserts are used for repairing damaged threads
• Not affected by vibration or torsion providing added strength and reliability
• All kits are contained in rugged metal boxes with individual compartments for
each size of insert and driver
• Each kit contains different-sized inserts and drivers ranging from M6 to M24 or 1/
4 inch to 1 1/2 inch threaded size
Reference
Special Instruction SEHS8792, Using Caterpillar Replacement Threads

Part Number Size Range

247-9662 M6 through M12
247-9663 M8 through M24
9S-3500 #10 through 1 1/2 inch, fine thread
9S-3700 #10 through 1 1/2 inch, course thread

Insert Kits and Replacement Kits

Warranty: Manufacturer, 90 Day
Insert Kits (Item 1)
• Used to repair threads of one specific size
• These insert kits include inserts of one size, a driver, and installation instructions
• Insert kits come in both English and metric threads
Replacement Kits (Item 2)
• Replacement kits provide inserts for restocking master kits such as 9S-3500, 9S-
3700, 247-9662, and 247-9663
• Kits include one size insert and installation instructions
• Replacements kits come in both English and metric threads
Reference
Special Instruction SEHS8792; Using Caterpillar Replacement Thread Inserts

Internal Insert Replacement External Inserts/

Thread Kit Part Inserts Kit Part Thread Tap Drill Drill Part Countersink Replace- Tap Part
Size Number /Kit Number Size Insert Length Diameter Number Diameter(11) Tap Size ment Kit Number
1 1/2 -12 9S-3638 2 9S-3680 1 7/8 -12 51 mm (2.01 in) 1 13/16 1U-7438 48 mm (1.89 in) 1 7/8 -12 2 –
1 1/2 -6 9S-3637 2 9S-3679 1 7/8 -12 51 mm (2.01 in) 1 13/16 1U-7438 48 mm (1.89 in) 1 7/8 -12 2 –
1 1/4 -12 9S-3636 2 9S-3678 1 5/8 -12 46 mm (1.81 in) 1 9/16 1U-7437 41 mm (1.61 in) 1 5/8 -12 2 1P-3045
1 1/4 -7 9S-3635 2 9S-3677 1 5/8 -12 46 mm (1.81 in) 1 9/16 1U-7437 41 mm (1.61 in) 1 5/8 -12 2 1P-3045
1 1/8 -12 9S-3634 2 9S-3676 1 1/2 -12 41 mm (1.61 in) 1 7/16 1U-5711 39 mm (1.54 in) 1 1/2 -12 3 1P-3044
1 1/8 -7 9S-3633 2 9S-3675 1 1/2 -12 41 mm (1.61 in) 1 7/16 1U-5711 39 mm (1.54 in) 1 1/2 -12 3 1P-3044
1-14 9S-3631 2 9S-3648 1 3/8 -12 35 mm (1.38 in) 1 5/16 1U-5707 35 mm (1.38 in) 1 3/8 -12 4 1P-3043
1-8 9S-3632 2 9S-3658 1 3/8 -12 35 mm (1.38 in) 1 5/16 1U-5707 35 mm (1.38 in) 1 3/8 -12 4 1P-3043

11 Use a standard countersink tool with an angle from 82 to 100 degrees. The diameter listed in the chart is the measurement at the top of
the counterbore. The tolerance for this diameter is -0 mm (.0 in) 0.25 mm (.010 in)

276
 Metal Repair
Insert Kits and Replacement Kits (Cont'd.)
Internal Insert Replacement External Inserts/
Thread Kit Part Inserts Kit Part Thread Tap Drill Drill Part Countersink Replace- Tap Part
Size Number /Kit Number Size Insert Length Diameter Number Diameter(11) Tap Size ment Kit Number
1/2 -13 9S-3622 5 9S-3653 3/4 -16 16 mm (0.63 in) 45/64 1U-7435 19 mm (0.75 in) 3/4 -16 15 1P-3036
1/2 -20 9S-3621 5 9S-3643 3/4 -16 16 mm (0.63 in) 45/64 1U-7435 19 mm (0.75 in) 3/4 -16 15 1P-3036
1/4 -20 9U-5053 13 9U-5054 7/16 -14 9.4 mm (0.37 in) X 1U-5610 11 mm (0.43 in) 7/16 -14 40 1P-3027
1/4 -28 9U-5055 13 9U-5056 7/16 -14 9.4 mm (0.37 in) X 1U-5610 11 mm (0.43 in) 7/16 -14 40 1P-3027
10-24 9S-3510 15 9S-3674 3/8 -16 7.8 mm (0.31 in) Q 1U-5606 9.6 mm (0.38 in) 3/8 -16 45 1P-3025
10-32 9S-3509 15 — 3/8 -16 7.8 mm (0.31 in) Q 1U-5606 9.6 mm (0.38 in) 3/8 -16 45 1P-3025
3/4 -10 9S-3628 2 9S-3656 1 1/8 -12 28 mm (1.10 in) 1 1/16 1U-5699 29 mm (1.14 in) 1 1/8 -12 6 1P-3041
3/4 -16 9S-3627 2 9S-3646 1 1/8 -12 28 mm (1.10 in) 1 1/16 1U-5699 29 mm (1.14 in) 1 1/8 -12 6 1P-3041
3/8 -16 9S-3618 6 9S-3651 9/16 -12 13 mm (0.51 in) 33/64 1U-7433 14 mm (0.55 in) 9/16 -12 20 1P-3031
3/8 -24 9S-3515 6 9S-3641 9/16 -12 13 mm (0.51 in) 33/64 1U-7433 14 mm (0.55 in) 9/16 -12 20 1P-3031
5/16 -18 9U-5057 8 9U-5058 1/2 -13 11 mm (0.43 in) 27/64 1U-5614 13 mm (0.51 in) 1/2 -13 25 1P-3029
5/16 -24 9U-5059 8 9U-5060 1/2 -13 11 mm (0.43 in) 27/64 1U-5614 13 mm (0.51 in) 1/2 -13 25 1P-3029
5/8 -11 9S-3626 2 9S-3655 7/8 -14 22 mm (0.87 in) 53/64 1U-7436 22 mm (0.87 in) 7/8 -14 9 1P-3038
5/8 -18 9S-3625 2 9S-3645 7/8 -14 22 mm (0.87 in) 53/64 1U-7436 22 mm (0.87 in) 7/8 -14 9 1P-3038
7/16 -14 9S-3620 6 9S-3652 5/8 -11 16 mm (0.63 in) 37/64 1U-7434 16 mm (0.63 in) 5/8 -11 18 1P-3033
7/16 -20 9S-3619 6 9S-3642 5/8 -11 16 mm (0.63 in) 37/64 1U-7434 16 mm (0.63 in) 5/8 -11 18 1P-3033
7/8 -14 9S-3629 2 9S-3647 1 1/4 -12 32 mm (1.26 in) 1 3/16 1U-5703 32 mm (1.26 in) 1 1/4 -12 5 1P-3042
7/8 -9 9S-3630 2 9S-3657 1 1/4 -12 32 mm (1.26 in) 1 3/16 1U-5703 32 mm (1.26 in) 1 1/4 -12 5 1P-3042
9/16 -12 9S-3624 3 9S-3654 3/4 -16 20 mm (0.79 in) 45/64 1U-7435 19 mm (0.75 in) 3/4 -16 10 1P-3036
9/16 -18 9S-3623 3 9S-3644 3/4 -16 20 mm (0.79 in) 45/64 1U-7435 19 mm (0.75 in) 3/4 -16 10 1P-3036
M10-1.25 246-7515 5 246-7523 M14-1.5 14 mm (0.55 in) 12.8 mm 1U-8173 14.2 mm (0.56 in) M14-1.5 10 8T-3093
M10-1.5 246-7514 10 246-7522 M14-1.5 14 mm (0.55 in) 12.8 mm 1U-8173 14.2 mm (0.56 in) M14-1.5 20 8T-3093
M12-1.75 246-7516 5 246-7524 M16-1.5 16 mm (0.63 in) 14.7 mm – 16.2 mm (0.64 in) M16-1.5 10 8T-3095
M16-2 246-7517 3 246-7525 M22-1.5 22 mm (0.87 in) 20.5 mm – 22.2 mm (0.88 in) M22-1.5 5 156-8166
M20-2.5 246-7518 3 246-7526 M30-2 30 mm (1.18 in) 28 mm – 30.2 mm (1.19 in) M30-2 5 –
M24-3 246-7519 2 246-7528 M33-2 33 mm (1.30 in) 31 mm – 33.2 mm (1.31 in) M33-2 5 —
M6-1 246-7511 10 246-7520 M10-1.25 10 mm (0.39 in) 8.8 mm 1U-8165 10.2 mm (0.40 in) M10-1.25 25 8T-3086
M8-1.25 246-7513 10 246-7521 M12-1.25 12 mm (0.47 in) 10.8 mm 1U-8169 12.2 mm (0.48 in) M12-1.25 25 8T-3089

11 Use a standard countersink tool with an angle from 82 to 100 degrees. The diameter listed in the chart is the measurement at the top of
the counterbore. The tolerance for this diameter is -0 mm (.0 in) 0.25 mm (.010 in)

277
Metal Repair
Installation Tools and Thread Inserts
SMCS Code: 7564
Models: 141-7250-416C, 426C, 428C, 436C, and 438C Backhoe Loader; 178-7635—E529, E523, E530, E524, E531, E525,
and various other models; 179-3571-various
Warranty: Caterpillar Standard Warranty, 6 Months

141-7250 Installation Tool

• Used to install M6 x 1 threaded insert
• Used with standard hand tools to make repair
• Allows convenient field repair of stripped or damaged threads
• Compact design allows installation of insert in confined areas
• Used in applications such as repair of threaded M6 x 1.0 mounting holes inside cab
of C-Series Backhoe Loaders
140-9921 Threaded Insert
• Used to repair stripped threads
• Used in material thickness of 0.7 to 3.0 mm (.028 to .118 in)
178-7635 Installation Tool
• Used to install 8-32 threaded insert
• Used with standard hand tools to make repair
• Allows convenient field repair of stripped or damaged threads
• Compact design allows installation of insert in confined areas
176-1691 Fastener
• Used to repair stripped threads
• Used in material thickness of .76 mm to 4.75 mm (.030 to .187 in)
179-3571 Installation Tool
• Used to install all 1/4 -20 threaded insert
• Used with standard hand tools to make repair
• Allows convenient field repair of stripped or damaged threads
• Compact design allows installation of inserts in confined area
178-1628 Fastener
• Used to repair stripped threads
• Used in material thickness of .76 mm to 4.75 mm (.030 to .187 in )
Reference
NEHS0677 Tool Operating Manual containing installation instructions

Bolt
Part Number Description Hex Size Length Thread Body Diameter Flange Diameter Thread
Installation Tools
141-7250 Installation Tool 9/16 in 12.7 mm (0.50 in) M6 x 1.0 – – –
178-7635 Installation Tool 9/16 in 10.2 mm (0.40 in) 8-32 – – –
179-3571 Installation Tool 9/16 in 13.3 mm (0.52 in) 1/4 -20 – – –
206-4496 Installation Tool (M4) 9/16 in 12.7 mm (0.50 in) M4 x 0.7 – – –
206-4499 Installation Tool (M6) 9/16 in 12.7 mm (0.50 in) M6 x 1.0 – – –

278
 Metal Repair
Installation Tools and Thread Inserts (Cont'd.)
Bolt
Part Number Description Hex Size Length Thread Body Diameter Flange Diameter Thread
Threaded Inserts
140-9921 Threaded Insert – 14.0 mm (0.55 in) – 9.5 mm (0.37 in) 10.0 mm (0.39 in) M6 x 1.0
176-1691 Fastener – 9.4 mm (0.37 in) – 6.3 mm (0.25 in) 6.8 mm (0.27 in) 8-32
178-1628 Threaded Insert – 13.1 mm (0.52 in) – 9.5 mm (0.37 in) 10.2 mm (0.40 in) 1/4 -20

Weld Wire
Warranty: Manufacturer
• Advanced Surface Characteristics Technology
• Improved feedability and arc starting/stability
• Superb wetting action
• Extended corrosion resistance
• Reduced contact tip wear
• Classifications/Approvals: DNV III YMS, CWB CSA W48: ER49S-6, BV SA3YM, ABS 3SA, 3YSA, DB 42.039.29, AWS
SFA5.18: ER70S-6, GL 3YS, LR 3S 3YS, VdTUV 10052
• Available in Canada, Mexico, and the United States

Typical Mechanical Properties

90% Ar/10% CO2
Yield Strength 66 ksi, 455 Mpa
Tensile Strength 82 ksi, 565 Mpa
Elongation in 2” 27%
Reduction of Area 56%
CVN (@-20°F) 82 ft-lbs, 111J
75% Ar/25% CO2
Yield Strength 66 ksi, 455 Mpa
Tensile Strength 82 ksi, 565 Mpa
Elongation in 2” 28%
Reduction of Area 61%
CVN (@-20°F) 44 ft-lbs, 111J
100% CO2
Yield Strength 65 ksi, 448 Mpa
Tensile Strength 78 ksi, 538 MPa
Elongation in 2” 25%
Reduction of Area 70%
CVN (@-20°F) 27 ft-lbs, 37 J
Part Number 432-6084 416-2693 432-6083 432-6087 432-6085 432-6086
Aristorod 12.5 mild steel MIG welding wire
Quantity 1050 lbs (476 kg) 550 lbs (250 kg) 40 lbs (18 kg) 900 lbs (408 kg) 550 lbs (250 kg) 40 lbs (18 kg)

279
Metal Repair
Weld Wire (Cont'd.)
Part Number 432-6084 416-2693 432-6083 432-6087 432-6085 432-6086
Gauge 0.045 0.045 0.045 0.035 0.035 0.035
Minimum 2 4 63 2 4 63

280
 Caps and Plugs
Cap and Plug Kit - 276-7018
Warranty: Cat Standard Warranty, 6 Months
• Protects against damage, dirt, moisture and corrosion during storage, ship-
ping and repair
• Tapered caps/plugs are designed to plug multiple inner diameters and cap
multiple outside diameters
• Three individual plastic boxes all found in one kit to keep caps/plugs organ-
ized and clean

276-7018 Consists of: 276-7018 Consists of: 276-7018 Consists of:

Part Part Part
Number Index Description Number Index Description Number Index Description
276-0731 Cap-Plug 276-0753 Cap-Plug 9U-7076 Cap/Plug - Tapered
276-0740 Cap-Plug 276-0754 Cap-Plug 9U-7077 Cap/Plug - Tapered
276-0741 Cap-Plug 276-0755 Cap-Plug 9U-7078 Cap/Plug - Tapered
276-0742 Cap-Plug 276-0756 Cap-Plug 9U-7079 Cap/Plug - Tapered
276-0743 Cap-Plug 276-0757 Cap-Plug 9U-7080 Cap/Plug - Tapered
276-0744 Cap-Plug 7E-8716 Cap-Plug 9U-7081 Cap/Plug - Tapered
276-0745 Cap-Plug 9U-7067 Cap/Plug - Tapered 9U-7082 Cap/Plug - Tapered
276-0746 Cap-Plug 9U-7068 Cap/Plug - Tapered 9U-7085 Cap/Plug - Tapered
276-0747 Cap-Plug 9U-7069 Cap/Plug - Tapered 9U-7087 Cap/Plug - Tapered
276-0748 Cap-Plug 9U-7070 Cap/Plug - Tapered 9U-7088 Cap/Plug - Tapered
276-0749 Cap-Plug 9U-7071 Cap/Plug - Tapered 9U-7089 Cap/Plug - Tapered
276-0750 Cap-Plug 9U-7073 Cap/Plug - Tapered 9U-7090 Cap/Plug - Tapered
276-0751 Cap-Plug 9U-7074 Cap/Plug - Tapered 9U-7091 Cap/Plug - Tapered
276-0752 Cap-Plug 9U-7075 Cap/Plug - Tapered

Conduit Covers
Warranty: Caterpillar Standard Warranty, 6 months
• Quick and easy to use
• Polyethylene nylon
• Built in quick tie
• Universal size
• Pack of 50
Conduit Covers
435-9843 4 x 5 inch (102 x 127 mm)
435-9844 8 x 8 inch (203 x 203 mm)
435-9845 12 x 12 inch (305 x 305 mm)

281
Caps and Plugs
ORFS Plugs
Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Thread Thread Size (A)

Part Number Dash Size (A) (in - TPI) L Length
231-3942 -24 (1) 2-12 1.10 in, 28 mm
6V-9507 -4 9/16 - 18 0.67 in, 17 mm
6V-9508 -6 11/16 - 16 0.75 in, 19 mm
6V-9509 -8 13/16 - 16 0.87 in, 22 mm
6V-9510 -10 1 - 14 1.02 in, 26 mm
6V-9511 -12 1 3/16 - 12 1.06 in, 27 mm
6V-9512 -16 1 7/16 - 12 1.10 in, 28 mm
6V-9513 -20 1 11/16 - 12 1.10 in, 28 mm

JIC 37° Plugs

Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Thread Thread Size (A)

Part Number Dash Size (A) (in - TPI) L Length (In)
2P-9697 -10 7/8 - 14 1.10
5P-2299 -16 1 5/16 - 12 1.34
5P-2909 -8 3/4 - 16 0.94
5P-4299 -14 1 3/16 - 12 1.30
5P-4996 -5 1/2 - 20 0.79
9S-5518 -4 7/16 - 20 0.79
9S-8895 -12 1 1/16 - 12 1.26
9S-8927 -6 9/16 - 18 0.83

1 Warranty: Six Months

282
 Caps and Plugs
Straight Thread O-Ring - Hex Head Plugs
Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Thread Size Thread Size

Part Number (in - TPI) O-Ring Seal Part Number (in - TPI) O-Ring Seal
1N-5998 1 7/8 - 12 6K-6307 9S-4185 3/4 - 16 3K-0360
1N-5999 3/8 - 24 7J-0204 9S-4188 1 3/16 - 12 4K-1388
3K-8460 1/2 - 20 1J-9671 9S-4190 7/8 - 14 2M-9780
9S-4180 5/16 - 24 4J-7533 9S-4191 9/16 - 18 3J-1907
9S-4181 1 5/16 - 12 7M-8485 9S-6130 1 5/8 - 12 2S-4078
9S-4182 7/16 - 20 3J-7354 9S-7583 2 1/2 - 12 030-4606
9S-4183 1 1/16 - 12 3D-2824

Straight Thread O-Ring - Hex Drive Plugs

Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and
corrosion during shipping and storage

Thread Size Thread Size

Part Number (in - TPI) O-Ring Seal Part Number (in - TPI) O-Ring Seal
5P-7684 1 7/8 - 12 6K-6307 9S-8006 7/8 - 14 2M-9780
9S-8001 5/16 - 24 4J-7533 9S-8007 3/8 - 24 7J-0204
9S-8002 7/16 - 20 3J-7354 9S-8008 1 1/16 - 12 3D-2824
9S-8003 1/2 - 20 1J-9671 9S-8009 1 3/16 - 12 4K-1388
9S-8004 9/16 - 18 3J-1907 9S-8010 1 5/8 - 12 2S-4078
9S-8005 3/4 - 16 3K-0360 9S-9334 1 5/16 - 12 7M-8485

Pipe - Hex Head Plugs

Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Part Number Thread Size (in - TPI) Part Number Thread Size (in - TPI)
090-9019 1 - 11 1/2 4J-4382 1/2 - 14
2S-7905 1/16 - 27 5M-6213 1/4 - 18
3J-5390 3/8 - 18 5M-6214 1/8 - 27
3M-7045 3/4 - 14

283
Caps and Plugs
Pipe - Square Head Plugs
Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Part Number Thread Size (in - TPI) Part Number Thread Size (in - TPI)
068-0710 1 1/4 - 11 1/2 5B-9169 1/2 - 14
2B-7408 1/8 - 27 5P-3320 3/4 - 14
2B-7409 1/4 - 18 7L-2505 1 - 11 1/2
2B-7457 3/8 - 18

Pipe - Square Drive Plugs

Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and
corrosion during shipping and storage

Part Number Thread Size (in - TPI) Part Number Thread Size (in - TPI)
1B-5170 1 1/4 - 11 1/2 6V-1897 2 - 11 1/2
1B-5174 3/4 - 14 6V-3280 2 1/2 - 8
2B-0858 1/2 - 14 7B-9665 1 1/2 - 11 1/2
3B-0551 1 - 11 1/2 7F-9504 1/4 - 18
4B-4845 3/8 - 18

Pipe - Hex Drive Plugs

Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Part Number Thread Size (in - TPI) Part Number Thread Size (in - TPI)
2R-5657 1 - 11 1/2 7M-7410 3/8 - 18
4D-0514 1/16 - 27 9F-2247 1/8 - 27
7H-3171 1/4 - 18

284
 Caps and Plugs
JIS - BSPP Shipping Plugs
Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Part Number JIS-BSPP Thread Size (in - TPI)

093-1321 1/4 - 19
093-1322 1/2 - 14
093-1323 3/4 - 14
096-3829 1 - 11
096-6073 3/8 - 19

Metric Plugs
Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Light Duty Heavy Duty

Part Number Tube O.D. (mm) Tube O.D. (mm) L Length (In) (mm)
2Y-5841 10 8 0.63 in, 16 mm
2Y-6461 10 8 0.71 in, 18 mm
2Y-6462 8 6 0.63 in, 16 mm
8C-4424 14 14 1.06 in, 27 mm
9T-6322 8 6 0.87 in, 22 mm

SAE Code 61 Flange Port Cover

Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Part Number Head Size (A) (in) Flange (mm)

2J-2668 2.38 60.3
2J-5608 2.81 71.4
5H-4017 1.19 30.2
5H-4018 1.50 38.1
5H-4019 1.75 44.5
5H-4020 2.00 50.8

285
Caps and Plugs
Cat Flange Port Cover
Warranty: Cat Standard Warranty, 6 Months
• Used to help protect against damage, dirt and moisture contamination, and corro-
sion during shipping and storage

Part Number Head Size (A) (in) Flange (mm)

5P-0045 1.25 31.8
5P-0046 1.63 41.3
5P-0047 1.88 47.6
5P-0048 2.12 54.0
5P-0049 2.50 63.5
5P-0050 3.13 79.4

Tapered Dual-Function Caps and Plugs

Warranty: Cat Standard Warranty, 6 Months
To assure a proper fit, dimension "E" should be approximately .020 in smaller than the
opening diameter of the part to be protected, or dimension "A" should be approxi-
mately .020 in larger than the opening diameter of the part to be protected.
• The tapered design allows the part to plug multiple inner diameters or cap multiple
outside diameters
• Protects against damage, dirt, moisture and corrosion during storage and shipping
• Material: Low-Density Polyethylene
• Color: Blue
• Applicable Spec: NAS 834 (supercedes MIL-C-5501/7, MIL-C-52078)
• Tapered Dual-Function Caps and Plugs

Part Package Length Length Length Length Length Length Length Length Length Length Supplier Part
Number Quantity (A) (in) (A) (mm) (B) (in) (B) (mm) (C) (in) (C) (mm) (D) (in) (D) (mm) (E) (in) (F) (in) Number
Tapered Dual-Function Caps and Plugs
276-0731 250 0.18 5 0.11 3 0.31 8 0.40 10 0.05 0.11 1 T-0-X
276-0740 250 0.24 6 0.17 4 0.37 10 0.37 10 0.10 0.17 2 T-1
276-0741 250 0.27 7 0.20 5 0.43 11 0.37 10 0.15 0.20 4 T-1-X
276-0742 250 0.30 8 0.24 6 0.46 12 0.37 10 0.17 0.24 5 T-2
276-0743 250 0.33 9 0.26 7 0.46 12 0.37 10 0.20 0.27 6 T-2-X
276-0744 250 0.36 9 0.30 8 0.53 13 0.37 10 0.23 0.30 7 T-3
276-0745 250 0.46 12 0.39 10 0.62 16 0.37 10 0.32 0.39 10 T-4-X
276-0746 250 0.51 13 0.44 11 0.62 16 0.40 10 0.38 0.44 12 T-5-X
276-0747 250 0.56 14 0.50 13 0.75 19 0.43 11 0.43 0.50 14 T-6-X
276-0748 250 0.67 17 0.58 15 0.87 22 0.53 13 0.52 0.60 18 T-8-X
276-0749 250 0.69 18 0.61 15 0.84 21 0.50 13 0.54 0.63 20 T-9
276-0750 250 0.93 24 0.82 21 1.12 29 0.62 15 0.75 0.86 29 T-13-A
276-0751 250 1.35 34 1.22 31 1.50 38 0.75 19 1.16 1.29 45 T-16
276-0752 250 1.45 40 1.29 33 1.62 41 1.00 25 1.22 1.39 48 T-17
276-0753 250 1.46 37 1.31 33 1.62 41 0.75 19 1.24 1.40 49 T-17
276-0754 100 1.75 44 1.60 41 1.93 49 0.75 19 1.56 1.68 56 T-19
276-0755 100 2.02 51 1.84 47 2.12 54 1.00 25 1.78 1.93 60 T-22-S
276-0756 100 2.16 55 1.98 50 2.25 57 1.00 25 1.91 2.11 63 T-25-A
276-0757 100 2.25 57 2.06 52 2.43 62 1.03 26 2.00 2.17 66 T-240

286
 Caps and Plugs
Tapered Dual-Function Caps and Plugs (Cont'd.)
Part Package Length Length Length Length Length Length Length Length Length Length Supplier Part
Number Quantity (A) (in) (A) (mm) (B) (in) (B) (mm) (C) (in) (C) (mm) (D) (in) (D) (mm) (E) (in) (F) (in) Number
Tapered Dual-Function Caps and Plugs
276-0758 50 2.60 66 2.39 61 2.62 67 1.00 25 2.33 2.54 73 T-44
276-0759 50 2.69 68 2.56 65 2.87 73 0.75 19 2.50 2.62 77 T-44
276-0760 50 3.24 82 2.98 76 3.37 86 1.00 25 2.90 3.16 85 T-501
276-0761 50 3.75 95 3.55 90 4.00 102 1.00 25 3.47 3.67 K-851 T-502
276-0762 50 3.92 100 3.80 97 4.12 105 0.68 17 3.71 3.84 91 T-1063
6V-7494 50 3.00 76 2.74 70 3.13 79 1.00 25 2.68 2.94 81 T-57-A
6V-7496 50 4.62 117 4.37 111 5.00 127 1.00 25 4.29 4.50 95 T-1076
9U-7067 250 0.40 10 0.33 8 0.56 14 0.38 10 0.27 0.33 8 T-3-X
9U-7068 250 0.43 11 0.36 9 0.59 15 0.38 10 0.30 0.37 9 T-4
9U-7069 250 0.49 12 0.42 11 0.59 15 0.38 10 0.36 0.42 11 T-5
9U-7070 250 0.55 14 0.49 12 0.72 18 0.50 13 0.41 0.49 13 T-6-5
9U-7071 250 0.62 16 0.53 13 0.75 19 0.50 13 0.47 0.55 16 T-7-X
9U-7072 250 0.63 16 0.55 14 0.78 20 0.50 13 0.49 0.57 17 T-8
9U-7073 250 0.73 18 0.64 16 0.88 22 0.50 13 0.58 0.67 21 T-9-X
9U-7074 250 0.75 19 0.67 17 0.88 22 0.63 16 0.62 0.69 22 T-10
9U-7075 250 0.79 20 0.69 18 0.94 24 0.63 16 0.63 0.72 23 T-11
9U-7076 250 0.85 22 0.75 19 1.03 26 0.63 16 0.69 0.79 27 T-12
9U-7077 250 0.91 23 0.80 20 1.09 28 0.75 19 0.74 0.85 28 T-12-X
9U-7078 250 0.98 25 0.87 22 1.11 28 0.63 16 0.81 0.92 31 T-13-X
9U-7079 250 1.04 26 0.90 23 1.16 29 0.75 19 0.83 0.98 35 T-14
9U-7080 250 1.09 28 0.97 25 1.25 32 0.75 19 0.90 1.03 40 T-14
9U-7081 250 1.15 29 1.00 25 1.31 33 0.75 19 0.94 1.08 41 T-14-X
9U-7082 250 1.23 31 1.11 28 1.52 39 0.75 19 1.04 1.18 42 T-15-X
7E-8716 250 1.29 33 1.18 30 1.44 37 0.75 19 1.11 1.22 44 T-15-5
276-0751 250 1.35 34 1.22 31 1.50 38 0.75 19 1.16 1.29 45 T-16
9U-7084 250 1.35 34 1.24 31 1.50 38 0.75 19 1.17 1.30 46 T-16
9U-7085 250 1.60 41 1.45 37 1.75 44 0.75 19 1.39 1.54 53 T-18
9U-7086 100 1.60 41 1.52 39 1.75 44 0.75 19 1.46 1.54 54 T-18-X
9U-7087 100 1.68 43 1.56 40 1.88 48 0.75 19 1.50 1.62 55 T-19
9U-7088 100 1.88 48 1.75 44 2.03 52 0.75 19 1.69 1.82 57 T-210
9U-7089 100 1.94 49 1.81 46 2.13 54 1.00 25 1.75 1.88 58 T-21
9U-7090 50 2.26 57 2.23 57 2.50 64 0.50 13 2.17 2.20 68 T-240
9U-7091 50 2.47 63 2.30 58 2.63 67 1.00 25 2.24 2.40 71 T-43-A
9U-7092 50 2.79 71 2.65 67 3.00 76 0.50 13 2.58 2.73 78 T-45-A
9U-7094 50 3.45 88 3.32 84 3.63 92 0.50 13 3.24 3.37 87 T1050
9U-7095 50 3.58 91 3.24 82 3.94 100 1.00 25 3.16 3.49 88 T1051
9U-7096 50 4.46 113 4.22 107 5.00 127 1.00 25 4.14 4.38 94 T1076

287
Caps and Plugs
Straight Cap
Warranty: Cat Standard Warranty, 6 Months

Part Package Length (A) Length (A) Length (B) Length (B) Length (C) Length (C) Length (D) Length (D) Length (E)
Number Quantity Material (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in)
217-1591 50 1 1.25 31.65 0.67 17 1 25.22 1.06 26.82 0.05

Non-threaded Caps
Warranty: Cat Standard Warranty, 6 Months
Package
Part Number Quantity Material(2) Diameter (A) (in) Length (B) (in) Length (B) (mm)
9U-7166 250 1 0.13 0.63 16
9U-7167 250 1 0.25 0.88 22
9U-7168 250 1 0.30 0.88 22
9U-7169 250 1 0.38 0.88 22
9U-7170 250 1 0.44 0.88 22
9U-7171 250 1 0.50 0.88 22
9U-7172 250 1 0.56 0.88 22
9U-7173 250 1 0.63 0.88 22
9U-7174 100 1 0.69 0.88 22
9U-7175 100 1 0.75 0.88 22
9U-7176 100 1 0.81 0.88 22
9U-7177 100 1 0.88 0.88 22
9U-7178 100 1 1.00 0.75 19
9U-7179 100 1 1.06 0.88 22
9U-7180 100 1 1.19 1.00 25
9U-7181 100 1 1.25 0.88 22
9U-7182 100 1 1.31 0.88 22
9U-7183 100 1 1.38 0.88 22
9U-7184 100 1 1.44 0.88 22
9U-7185 100 1 1.50 0.88 22
9U-7186 100 1 1.63 1.00 25
9U-7187 100 1 1.69 0.88 22
9U-7188 100 1 1.75 0.88 22
9U-7189 100 1 1.88 0.88 22
9U-7190 100 1 2.00 0.88 22
9U-7191 100 1 2.13 0.88 22
9U-7192 100 1 2.38 0.88 22
9U-7193 100 1 2.50 0.88 22
9U-7194 50 1 3.13 1.38 35

2 1: Grade 1 Virgin Polyethylene

2: Low Density Polyethylene
3: High Density Polyethylene

288
 Caps and Plugs
Metric Threaded Cap Protectors
Warranty: Cat Standard Warranty, 6 Months

Package Diameter x Length Length Length Length Length Length

Part Number Quantity Material(3) Pitch (A) (in) (A) (mm) (B) (in) (B) (mm) (C) (in) (C) (mm)
9U-7145 100 2 M10 x 1.0 0.39 10 0.54 14 0.29 8
9U-7146 100 2 M12 x 1.5 0.47 12 0.62 16 0.37 10
9U-7147 100 2 M14 x 1.5 0.47 12 0.70 18 0.37 10
9U-7148 100 2 M16 x 1.5 0.47 12 0.78 20 0.37 10
9U-7149 100 2 M18 x 1.5 0.55 14 0.85 22 0.45 12
9U-7150 100 2 M20 x 1.5 0.55 14 0.92 24 0.37 10
9U-7151 50 2 M22 x 1.5 0.54 14 1.02 26 0.45 12
9U-7152 50 2 M24 x 1.5 0.55 14 1.14 29 0.45 12
9U-7153 50 2 M26 x 1.5 0.55 14 1.18 30 0.45 12

Metric Threaded Plug Protectors

Warranty: Cat Standard Warranty, 6 Months

Package Diameter x Length (A) Length (A) Length (B) Length (B) Length (C) Length (C)
Part Number Quantity Material(3) Pitch (in) (mm) (in) (mm) (in) (mm)
9U-7136 100 2 M10 x 1.0 0.57 15 0.60 15 0.41 10
9U-7137 100 2 M12 x 1.0 0.66 17 0.73 19 0.42 11
9U-7138 50 2 M14 x 1.5 0.68 17 0.73 19 0.37 10
9U-7139 50 2 M16 x 1.5 0.68 17 0.87 22 0.50 13
9U-7140 50 2 M18 x 1.5 0.72 18 0.96 24 0.54 14
9U-7141 50 2 M20 x 1.5 0.72 18 1.04 26 0.55 14
9U-7142 50 2 M22 x 1.5 0.72 18 1.11 28 0.54 14
9U-7143 50 2 M24 x 1.5 0.73 19 1.23 31 0.54 14
9U-7144 50 2 M26 x 1.5 0.73 19 1.46 37 0.54 14

3 1: Grade 1 Virgin Polyethylene

2: Low Density Polyethylene
3: High Density Polyethylene

289
Caps and Plugs
Threaded Plug Protectors for Flared Fittings
Warranty: Cat Standard Warranty, 6 Months
Part Package Thread Size Tube
Number Quantity Material (4) (in - TPI) Diameter (in)
9U-7114 250 1 7/16 - 20 0.25
9U-7115 250 1 9/16 - 18 0.38
9U-7116 250 1 3/4 - 16 0.50
9U-7117 100 1 7/8 - 14 0.63
9U-7118 100 1 11/16 - 12 0.75
9U-7119 100 1 15/16 - 12 1.00

Threaded and Slotted Plug Protectors

Warranty: Cat Standard Warranty, 6 Months

Part Package Material Thread Size Tube Length Length Length Length Length Length Length Length
Number Quantity (4) (in - TPI) Diameter (in) (A) (in) (A) (mm) (B) (in) (B) (mm) (C) (in) (C) (mm) (D) (in) (D) (mm)
9U-7104 250 3 7/16 - 20 – 0.43 11 0.62 11 0.18 5 0.30 5
9U-7105 100 3 1/2 - 20 – 0.50 13 0.68 13 0.18 5 0.36 5
9U-7106 100 3 9/16 - 18 – 0.50 13 0.75 13 0.18 5 0.33 5
9U-7107 100 3 3/4 - 16 – 0.68 17 0.94 17 0.19 5 0.44 5
9U-7108 100 3 7/8 - 14 – 0.75 19 1.06 19 0.24 6 0.50 6
9U-7109 100 3 11/16 - 14 – 0.87 22 1.31 22 0.25 6 0.62 6
9U-7110 50 3 13/16 - 12 – 1.00 25 1.50 25 0.30 8 0.70 8
9U-7111 50 3 15/16 - 12 1.00 1.07 27 1.62 27 0.30 8 0.70 8
9U-7112 50 3 1 5/8 - 12 – 1.13 29 1.88 29 0.30 8 0.75 8
9U-7113 50 3 1 7/8 - 12 – 1.50 38 2.13 38 0.30 8 0.75 8

Plug Protectors for NPT Thread - Square Head

Warranty: Cat Standard Warranty, 6 Months

4 1: Grade 1 Virgin Polyethylene

2: Low Density Polyethylene
3: High Density Polyethylene

290
 Caps and Plugs
Plug Protectors for NPT Thread - Square Head (Cont'd.)
Thread Size Length Length Length Length
Part Number Package Quantity Material(5) (in - TPI) (A) (in) (A) (mm) (B) (in) (B) (mm)
9U-7098 250 3 1/8 - 27 0.28 7 0.38 10
9U-7099 250 3 1/4 - 18 0.38 10 0.44 11
9U-7100 250 3 3/8 - 18 0.44 11 0.50 13
9U-7101 250 3 1/2 - 14 0.56 14 0.56 14
9U-7102 100 3 3/4 - 14 0.69 17 0.63 16

Plug Protectors for NPT Thread - Knurled Head

Warranty: Cat Standard Warranty, 6 Months

Part Package Thread Size Length (A) Length (A) Length (B) Length (B) Length (C) Length (C) Length (D) Length (D)
Number Quantity Material(5) (in - TPI) (in) (mm) (in) (mm) (in) (mm) (in) (mm)
9U-7103 100 3 1 - 11 1/2 0.50 13 1.57 40 0.25 6 1.18 30

5 1: Grade 1 Virgin Polyethylene

2: Low Density Polyethylene
3: High Density Polyethylene

291
Caps and Plugs
Tear Cap Protectors for Standard Thread
Warranty: Cat Standard Warranty, 6 Months

Part Package Thread Size JIC/SAE Length Length Length Length

Number Quantity Material(6) (in - TPI) Fitting (A) (in) (A) (mm) (B) (in) (B) (mm)
9U-7120 250 1 7/16 - 20 4-TS 0.46 12 0.43 11
9U-7121 250 1 1/2 - 20 5-TS 0.46 12 0.49 12
9U-7122 250 1 9/16 - 18 6-TS 0.48 12 0.55 14
9U-7123 250 1 11/16 - 16 7-TS 0.48 12 0.67 17
9U-7124 250 1 3/4 - 16 8-TS 0.56 14 0.74 19
9U-7125 250 1 13/16 - 16 9-TS 0.56 14 0.80 20
9U-7126 250 1 7/8 - 14 10-TS 0.65 17 0.87 22
9U-7127 250 1 1 - 14 11-TS 0.65 17 0.99 25
9U-7128 250 1 11/16 - 12 12-TS 0.75 19 1.05 27
9U-7129 250 1 13/16 - 12 13-TS 0.75 19 1.17 30
9U-7130 100 1 15/16 - 12 16-TS 0.75 19 1.30 33
9U-7131 100 1 1 7/16 - 12 17-TS 0.75 19 1.43 36
9U-7132 100 1 1 5/8 - 12 20-TS 0.83 21 1.62 41
9U-7133 100 1 1 11/16 - 12 21-TS 0.83 21 1.67 42
9U-7134 100 1 1 7/8 - 12 24-TS 0.95 24 1.87 48
9U-7135 50 1 2 1/2 - 12 32-TS 1.20 30 2.49 63

SAE Code Flange 61 Bolted Protectors

Warranty: Cat Standard Warranty, 6 Months
Part Number Package Quantity Material (6) Thread Size (in - TPI)
9U-7154 25 1 1/2 NPT
9U-7155 25 1 3/4 NPT
9U-7156 25 1 1 NPT
9U-7157 25 1 1 1/4 NPT
9U-7158 25 1 1 1/2 NPT
9U-7159 25 1 2 NPT
9U-7160 25 1 2 1/2 NPT

6 1: Grade 1 Virgin Polyethylene

2: Low Density Polyethylene
3: High Density Polyethylene

292
 Caps and Plugs
British Thread - BSP/GAS Plug Protectors
Warranty: Cat Standard Warranty, 6 Months

Package Thread Size Length Length Length Length Length Length

Part Number Quantity Material(7) (in - TPI) (A) (in) (A) (mm) (B) (in) (B) (mm) (C) (in) (C) (mm)
9U-7195 100 2 1/8 - 28 0.41 11 0.65 16 0.16 4
9U-7196 100 2 1/4 - 19 0.50 13 0.74 19 0.26 7
9U-7197 100 2 3/8 - 19 0.47 12 0.90 23 0.27 6
9U-7198 100 2 1/2 - 14 0.68 17 1.10 28 0.41 10
9U-7199 50 2 5/8 - 14 0.72 18 1.23 31 0.51 13
9U-7200 50 2 3/4 - 14 0.67 17 1.27 32 0.43 11
9U-7201 50 2 7/8 - 14 0.71 18 1.50 38 0.53 14
9U-7202 50 2 1 - 11 0.66 17 1.57 40 0.42 11

SAE Code 62 and Caterpillar Flange Bolted Protectors

Warranty: Cat Standard Warranty, 6 Months
Package
Part Number Quantity Material (7) Thread Size (in - TPI)
9U-7161 25 1 3/4 NPT
9U-7162 25 1 1 NPT
9U-7163 25 1 1 1/4 NPT
9U-7164 25 1 1 1/2 NPT
9U-7165 25 1 2 NPT

7 1: Grade 1 Virgin Polyethylene

2: Low Density Polyethylene
3: High Density Polyethylene

293
Vises
Tradesman Vises
Warranty: Manufacturer, Lifetime
• Replaceable, hardened steel serrated jaw inserts and replaceable pipe jaws
• Precision, machined keyed slide bar
• Built for maximum quality and performance
• Straight line design means no wear on spindle or nut
• 360° swivel base, double lockdowns
• Side play eliminated by precision machined slide bar—keyed for precision
• Fully enclosed design keeps dirt and contaminants out
Replacement
Part Jaw Max. Opening Shipping Replacement Pipe Jaw Replacement
Number Width Pipe Capacity Throat Depth Width Weight Jaw Insert Kits Inserts Jaw Insert
188-2163 8 1/8 in- 3 1/2 in 4 3/4 in 7 in 109.0 lb – – –
233-8145 4 1/4 in-2 in 3 7/16 in 4 1/2 in 37.0 lb – 236-2654 –
233-8146 5 1/4 in- 2 1/2 in 3 3/4 in 5 1/4 in 50.0 lb 236-2655 236-2654 –
233-8147 6(1) 1/4 in- 3 1/2 in 4 1/8 in 5 3/4 in 64.0 lb 236-2648 236-2654 –
Replacement Parts for Non Current Vises
188-2143 – – – – – 4C-4400 –
188-2145 – – – – – 4C-4400 188-2167
188-2147 – – – – – 4C-4400 188-2170
4C-3741 – – – – – 4C-4400 –
4C-3742 – – – – – 4C-4400 4C-4392
4C-3743 – – – – – 4C-4400 4C-4393

Machinist Vises
Warranty: Manufacturer, Lifetime
• Stressed parts made of 60,000 PSI tensile strength ductile iron
• Straight line design guarantees a lifetime spindle and nut
• Precision slide bar is moveable, maintained with hardened steel key, insuring a
.002 mm fit
• 360° slip proof swivel base—serrated teeth and double lockdowns
• Largest anvil of any machinists' vise

Max. Opening Shipping Replacement

Part Number Model Jaw Width Throat Depth Width Weight Jaw Insert
4C-3751 350S 3 1/2 in 2 3/4 in 5 1/4 in 46.0 lb –
4C-3752 400S 4 in 3 1/2 in 6 1/2 in 66.0 lb –
4C-3753 450S 4 1/2 in 4 3/16 in 7 1/2 in 73.0 lb 4C-4394
4C-3754 500S 5 in 4 1/4 in 8 in 97.0 lb 4C-4399

1 Warranty: Caterpillar, Lifetime

294
 Vises
6 1/2" Tradesman Vise - 377-5722
Warranty: Manufacturer, Lifetime
• Built for maximum quality and performance
• Suited for shop use and on Dealer Service Trucks
• Sealed design protects moving parts from dirt, dust, and moisture
• Precision slide bar is fitted within .003" to minimize play
• Built-in anvil for forming and shaping materials
• Reversible jaw inserts provide either a non-marring or maximum grip
• Includes jaws for steel pipe

Max. Opening Shipping

Jaw Width Pipe Capacity Throat Depth Width Weight
6 1/2 in 1/4 - 3 1/2 in 4 in 6 1/2 in 22kg (73 lb)

Part Number Description

377-5722 6 1/2" Tradesman Vise

Combination Pipe and Bench Vises

Warranty: Manufacturer, Lifetime
• Stressed parts made of 60,000 PSI tensile strength ductile iron
• Replaceable hardened steel jaw inserts
• Hardened, replaceable steel pipe jaws
• Alloy steel slide bar

Part Jaw Throat Max. Opening Shipping Replacement Jaw

Number Model Width Pipe Capacity Depth Width Weight Insert
4C-3745 C-2 5 in 1/8 in- 4 1/2 in 5. 5/16 in 7 in 113.0 lb 4C-4395
4C-3746 C-3 6 in 3/8 in-6 in 6 5/8 in 9 in 209.0 lb 4C-4396

Model R — Rubber Face Magnefix Jaw Caps

Warranty: Manufacturer, Lifetime
• Aluminum alloy with synthetic rubber cover
• Jaw cap conforms to workpiece and grips firmly without slipping
• Designed to prevent cushioning during use
• Use in combination with Prism Jaw Caps to clamp taper pins or tapered work-
pieces
• Mar-free
• Jaw caps sold separately
Use with these Vises or any other
Part Number Jaw Width with the same Jaw Width
4C-6833 6 in 4C-3746

295
Vises
Model P — Prism Magnefix Jaw Caps
Warranty: Manufacturer, Lifetime
• Jaw construction includes a 120° horizontal Vee-Groove, 3 vertical Vee-Grooves
and a 90° groove for marking out and center punching
• Ideal for light tapping and thread cutting applications
• Capable of clamping a block of material in a vise to be utilized as a surface plate
for light duty work
• Jaw caps sold separately

Use with these Vises or any other

Part Number Jaw Width with the same Jaw Width
4C-6837 6 in (2) 4C-3746

Jaw Caps
Warranty: Manufacturer, Lifetime
• Designed to avoid marring the surface of softer metals and to protect jaw faces
• Made to fit any size vise
• Polished faces and pliable copper extensions for a sure-grip fit on any make vise

Part Number Description Width

4C-3747 Jaw Cap 6 in
4C-3748 Jaw Cap 5 in
4C-3749 Jaw Cap 4 1/2 in
4C-3750 Jaw Cap 4 in

Holding Fixture
Warranty: Cat Standard Warranty, 6 Months
• Mounts on workbench
• Use to secure components during assembly and disassembly
• Capable of holding small transmissions, differentials, hydraulic pumps, water
pumps and electrical components

Part Number Capacity

2P-8338 250.0 lb

2 Warranty: Caterpillar, 6 Months

296
 Vises
Yoke Pipe Vise
Warranty: Cat Standard Warranty, 6 Months
• Used to brace pipe for cutting and machining
• Used for pipe from 10 through 102 mm (1/8 through 3 1/2 in)

Part Number Weight

127-1909 7.4 kg (16.23 lb)

Regular Duty, Standard Throat C-Clamps

Warranty: Manufacturer, Lifetime
• Recommended for regular-duty work not requiring unusual throat depth
• Drop forged from specially selected steels
• Light enough for production line use
• Equipped with Wilton Permapads® and lifetime lubricated spindles of through-
hardened steel
• Finished in grey enamel

Part Number Capacity Throat Depth Spindle Diameter Minimum Proof Test Weight
4C-3755 0 - 2 in 1 13/16 9/16 2.00 1 3/8 lb
4C-3756 0 - 3 in 1 15/16 9/16 3.00 1 43/64 lb
4C-3757 0 - 4 in 2 5/16 5/8 3.00 2 3/4 lb
4C-3758 0 - 6 in 2 15/16 5/8 4.00 3 3/4 lb
4C-3759 2 in - 8 in 3 7/16 3/4 5.00 7 lb
4C-3760 1 1/2 in - 10 in 3 3/4 3/4 6.00 8 3/8 lb
4C-3761 1 1/8 in - 12 in 3 7/8 3/4 8.00 12 lb

297
Battery Service Equipment
Cat Battery Tester
Warranty: Manufacturer’s
4C-4911
• 1000 Amp Load Tester is ideal for battery distributors, high volume testing and fleet use.
• High resolution carbon pile assembly ensures maximum contact, reduces hot spots, prevents edge burning and
provides smoother operation and longer life.
• High rpm fan cools for continuous battery testing
Part Limited Shipping Dimensions
Number Load Ammeter Voltmeter Leads Clamps Warranty Weight (H x W x D)
4C-4911 1000A 0 - 1999 Amps 0 - 19.99 V DC 5 ft - Vinyl insulated steel with 1 year 34 lb 16 in x 15 in x 15 in (.40
(Digital) (Digital) 2 AWG flexi-spring and copper jaw (15.4 kg) m x .38 m x .38m)

298
 Battery Service Equipment
Multi-Battery Parallel Chargers
Warranty: Manufacturer, One Year
4C-4913
• Charges 1 - 10, 12 Volt Batteries, in parallel, in less than 24 hours
• 16 charge rates offer precise charging
• Alternate model 4C-4914 charges 1 - 36, 12 Volt batteries in parallel
• Can be mounted on wall or bench
• UL Listed; RoHS Compliant
• Patented multi-diode rectifier with deep reserve capacity
Additional accessories available:
• 4C-4917 Buss Bar ensures convenient way to hook up 10 batteries in parallel.
Buss Bar includes 10 pairs of leads with insulated fiberglass backboard, with 300
Amp insulated safety clamps.
• 9U-5784 Charging Rack that stores up to 15 batteries
4C-4914
• Charges 1 - 36, 12 Volt Batteries, in parallel, in less than 24 hours
• Designed for 190 – 262 Vac 50/60Hz electrical environments
• Includes a patented multi-diode rectifier with a deep reserve capacity
• Circuit breaker protection and isolated transformer provides added safety
• Can be mounted on a wall or bench
• UL Listed
Additional accessories available:
• 4C-4917 Bus Bar ensures convenient way to hook up to 10 batteries in parallel.
Bus Bar includes 10 pairs of DC Charging leads (48” long, 8.5 AWG with 300 Amp
insulated clamps) and insulated fiberglass backboard
• 9U-5784 Charging Rack Battery charging rack stores up to 15 Batteries on three-
shelf acid resistant, insulated rack
4C-9799
• Charges 1 – 10, 12 Volt Batteries, in parallel, in less than 24 hours
• Designed for 230 VAC 50/60Hz electrical environments
• Includes a patented multi-diode rectifier with a deep reserve capacity
• Circuit breaker protection and isolated transformer provides added safety
• Can be mounted on a wall or bench
Additional accessories available:
• 4C-4917 Bus Bar ensures convenient way to hook up to 10 batteries in parallel.
Bus Bar includes 10 pairs of DC Charging leads (48” long, 8.5 AWG with 300 Amp
insulated clamps) and insulated fiberglass backboard
• 9U-5784 Charging Rack Battery charging rack stores up to 15 Batteries on three-
shelf acid resistant, insulated rack

299
Battery Service Equipment
Multi-Battery Parallel Chargers (Cont'd.)
Shipping
Battery Charge Digital Digital Dimensions (H
Part Number DC Output AC Input Capacity Rates Voltmeter Ammeter DC Leads AC Cord Weight x W x D)
4C-4913 30 Amps, 108-132/ Up to 10, 12 16 11 - 17 Volts 0 - 50 1.8 m (6 ft) 6.5 ft 16–3 18 kg (40 lb) 16 in x 19 in x
14.9 Volts VAC, 7.5A 60 Volt Amps 6.5 AWG 16 in
Hz Batteries
4C-4914 110 Amps, 190-262/ Up to 36, 12 16 0 - 19.99 0 - 199 1.5 m (5 ft) 1 No AC cord, 38 kg (83 lb) 26 in x 17 in x
15.5 Volts VAC, 13.8A Volt Volts Amps AWG must be 14 in
50/60Hz Batteries (Digital) hard wired
4C-9799 30 Amps, 210 - 250/ Up to 10, 12 16 11 - 17 Volts 0 - 50 m (6.5 ft) 6 16A, 2m 18 kg (40 lb) 16.5 in x 19 in x
14.9 Volts(1) VAC, 4A, 50/ Volt (Digital) Amps 1/2 AWG length (No 16.5 in
60Hz Batteries Plug)

Bus Bar Set - 4C-4917

Warranty: Manufacturer, Mixed (2)
• Bus Bar Set for parallel charging
• Ten Battery Capacity
• Use one or combine additional bars for additional capacity
• Insulated fiberglass backboard with 10 pairs of DC Charging leads, 4 AWG (36 in)
long with 300 Amp insulated safety clamps
• Comes with (3 ft) 4 AWG cables to connect to charger or additional batteries
• Can be mounted on wall or bench
• Ensures convenient way to hook up to 10 batteries in parallel
Part
Number Capacity Leads Clamp Material Weight Dimension
4C-4917 Connections for 10 10 sets - 4 AWG, (36 300 Amp Insulated Insulated Fiberglass 11 kg (24 lb) 31.25 in x 15.25 in x 5.25 in
Batteries in) long Safety Backboard

Battery Charging Rack

Warranty: Cat Standard Warranty, 6 Months
• Stores up to 15 batteries
• Three-shelf, acid resistant, insulated steel rack
• Includes 10 pairs of charging leads

Part Number Description

9U-5784 Battery Charging Rack

1 Warranty: Caterpillar, 6 Months

2 One year on parts/labor, five years on transformer/rectifier

300
 Battery Service Equipment
Heavy-Duty Commercial Fast Chargers
Warranty: Manufacturer, Mixed (3)
4C-4920
• Highest performance fast chargers on the market
• 16 rates of charge and 75 amps
• 75 amps of continuous charge with 375 amps crank assist at 12 Volts
• Fan cooling prevents overheating enhancing unit’s life span significantly
• UL and CSA listed with “Safe in Any Weather” Operation
• Patented “Stop / Go” Light
• Automatic reset AC and DC circuit breakers
• Automatic timer
4C-4921
• The highest performance fleet charger on the market
• 33% more engine start than the previous model
• 80 amp continuous charge with 400 amp crank assist at 12 Volts
• Fan cooling prevents overheating enhancing unit’s life span significantly
• 500 Amp, fully insulated, “Flexi-Spring” clamps
• UL and CSA listed with “Safe in Any Weather” operation
• Patented “Stop / Go” Light
• Automatic reset AC and DC circuit breakers
• Automatic timer
4C-4910
• Charges all standard & maintenance free 6/12/24 V batteries
• High Output 220VAC Charger
• Cranking assist rating of 325 amps at 6 Volts
• Fan cooling mechanism prevents overheating enhancing the unit’s life span
significantly
• Certified for outdoor use, safe in any weather
• Cautions against incorrect polarity with patented “stop-go-light” technology
• CE Approved

UL UL MFGS Shipping
Part Electrical Battery Continuous Cranking Boost Clamp Dimension
Number Requirements Voltage Rating Weight Assist Rate Rating AC Cord DC Leads Rating (H x W x D) Timer
4C-4920 Specifications
4C-4920 120 VAC, 14.8A, 6/12 Volt 100/75 Amp 25 kg 375 Amp 625 Amp 3m (10 ft) 2.4 m (8 ft) 500 Amp 26 in x 16 in x 14 –
50 Hz (55 lb) 14 - 3 4 AWG in
4C-4921 Specifications
4C-4921 120 VAC, 15A, 6/12/18/24 31 kg 400 Amp 725 Amp 3m (10 ft) 2.4 m (8 ft) 500 Amp 26 in x 16 in x 14 –
60 Hz Volt (68 lb) 14 - 3 4 AWG in
4C-4910 Specifications
4C-4910(4) 230 VAC; 50/60 6/12/24 90/75/55 34 kg 325/270/180 300/500/700 2.4 m (7.9 3 m (9.8 ft) 500 Amp 26 in x 16.5 in x 90 mi-
Hz Volt Amp (75 lb) Amp Amp ft) 16A 4 AWG 14 in nute
Euro plug auto

3 One year on parts/labor, five years on transformer/rectifier

4 Warranty: Caterpillar, Six Months

301
Battery Service Equipment
Portable Chargers
Warranty: Manufacturer, Mixed (5)
4C-4924
• Chargers all standard and maintenance free 6/12 Volt Batteries with 4 charging
positions
• Fully portable
• Fan cooling mechanism prevents overheating enhancing unit’s life span
significantly
• Certified for outdoor use in any weather
• Cautions against incorrect polarity with patented “stop-go-light” technology
• 500 Amp clamps are covered with vinyl insulation; will not arc or spark
4C-4925
• Charges all standard maintenance free 6 and 12 volt batteries
• Four charging positions
• Fan cooled to extend units life span
• UL, cUL certified for indoor and outdoor use
200-6319
• Analyzes battery condition and automatically selects proper charging technique
• Voltage controlled charging
• Suitable for flooded batteries including GEL and AGM
• Utilizes three color LEDS to monitor charging status
• Program for deep discharge recovery of flooded batteries
• Capable of charging both small and large batteries
• Switch for selecting battery type
• Maintains battery charge, can be left connected to battery
Amps Cranking
Part Battery Continu- Boost Assist Clamp
Number Voltage AC Input ous Rating Rating Rating Timer Weight AC Cord DC Leads Rating Dimensions
4C-4924 6/12 Volt 120VAC, 70/60 Amp 420 Amp 230 Amp 90 min 17 kg (6 1/2 ft) 2 m 7 ft 4/AWG 500 Amp –
12.9A, Auto (38 lb)
60Hz
4C-4925 6/12 Volt 120VAC, 40/10 Amp 300 Amp 200 Amp – 14 kg (6 ft) 1.8 m 6 ft 6/AWG 200 Amp –
60Hz (31 lb)
200-6319 12 Volt 120VAC, 10 Amp – – – 5 kg (6 ft) 1.8 m 6 ft 16/AWG 50 Amp 10 in x 9 in x 9 in
2.2A, 60Hz (11 lb)

5 Part number 200-6319: One Year; Part number 4C-4924: One Year on parts/labor, five years on transformer/rectifier

302
 Battery Service Equipment
Extra Heavy-Duty Plug-In Starting System
Warranty: Cat Standard Warranty, 6 Months
• More truck starting power than 8hp gas starter
• Extra heavy duty plug-in starting system ideal for volume car starting in extremely
cold climates
• Heavier 1 AWG cable has half the voltage drop as Model 4C-4929 (6139)
• Anti-spark delay timer protection for safety during hook-up
• Circuit breaker protection
• Polarity protection
• 30 foot of tangle-free cables
• Stainless steel receptacle mounts onto a truck bumper and connects directly to a
battery
• Reaches stalled vehicles from front, back, or side
• Solid copper jaw, with patented insulated clamps with “flexi-spring” cable guard
• Patented “stop-go safety light”

Vehicle Cir. Mil. Side

Total Connection Copper, Terminal Shipping
Part Number Description Length Length Gauge Jacket Amp Clamp Adapters SAE Rating Weight Dimensions
4C-4930 Extra Heavy-Duty 30 ft 5 ft 1 AWG 83,600 T-94 800 A No Super 26 lb 9 in x 12 in x
Plug-In Starting Heavy-Duty 12 in
System
Service Part
4C-9917 Power Socket with – – – – – – – – –
Battery Cable

Heavy-Duty Plug-In Starting System

Warranty: Cat Standard Warranty, 6 Months
• Stainless Steel receptacle mounts onto a truck bumper and connects directly to a
battery
• Reaches stalled vehicles from front, back or side
• Polarized LEXAN plug won’t break in coldest weather
• Solid copper jaw, with patented insulated clamps with “flexi-spring” cable guard
• Patented “stop-go safety light”
• 30 ft of tangle-free cables
• For the flush mount version, combine with 4C-4931 (6125)
Vehicle Cir. Mil. Side
Part Total Connection Copper, Terminal Shipping
Number Description Length Length Gauge Jacket Amp Clamp Adapters SAE Rating Weight Dimensions
4C-4929 Heavy-Duty Plug-In 30 ft 5 ft 4 AWG 41,300 T-94 500 A Yes Heavy-Duty 17 lb 6 in x 12 in x
Starting System 12 in
Service Parts
4C-4943 Power Socket with – – – – – – – – –
battery cable

303
Battery Service Equipment
Heavy-Duty Plug-In Starting System (Cont'd.)
Vehicle Cir. Mil. Side
Part Total Connection Copper, Terminal Shipping
Number Description Length Length Gauge Jacket Amp Clamp Adapters SAE Rating Weight Dimensions
4C-4944 Plug-in Cable (in- – – – – – – – – –
cludes clamps)
4C-4946 Polarized Lexan® – – – – – – – – –
Plug, .45 kg (1 lb)

Flush Mount Power Socket

Warranty: Cat Standard Warranty, 6 Months
• Alternative to cabinet style socket — stainless steel plate mounts flush on serv-
ice vehicle
• For a complete starting system, order 4C-4931 and 4C-4944 Plug-In Cables

Part Number Description

4C-4931 Flush Mount Power Socket

Booster Cables
Warranty: Cat Standard Warranty, 6 Months
• Professional quality
• Ensure quick and efficient connections
• Designed for convenience and safety
• Replacement clamps available

Side Terminal Approx. Individual

Part Number Length Gauge Gauge (circular mil) Jacket Clamp Rating Adapters Weight
Heavy Duty and Super Heavy Duty Cables
4C-4934(6) 4 m (12 ft) 5 AWG 32,900 T-94(7) 500 A Yes 3.6 kg (7.94 lb)
4C-4938 5 m (15 ft) 1/0 AWG 106,400 T-94(7) 800 A No 7.3 kg (16.09 lb)
Booster Cables
300-5899 6 m (20 ft) 2 AWG 62,450 T-94 600A No 6.4 kg (14.11 lb)
4C-4933 4 m (12 ft) 4 AWG 37,360 T-94(7) 500E No 2.7 kg (5.95 lb)
4C-4935 5 m (16 ft) 4 AWG 37,360 T-94(7) 500E No 3.6 kg (7.94 lb)
4C-4936 6 m (20 ft) 4 AWG 37,360 T-94(7) 500E No 4.1 kg (9.04 lb)

6 Equipped with stop/go light - red L.E.D.s warn operator if polarity is reversed
7 T-94: flexible to 4° C (-40° F)

304
 Battery Service Equipment
Replacement Clamps
Warranty: Cat Standard Warranty, 6 Months
• Designed to grip securely to side terminal and/or post terminal batteries for maxi-
mum current carrying capacity
• Color coded (Red/Black) for safety and visual appeal
Clamp
Part Number Description Rating Jaws Insulation Weight/Master
4C-4940 Replacement clamp for use with 3, 4, 500A Copper Bonded Vinyl 4 kg (8.82 lb)
and 6 ga cable
4C-4942 Batteries and Battery Chargers 600A Heavy Gauge Bonded Vinyl 4.5 kg (9.92 lb)
Copper

Battery Post Set

Warranty: Cat Standard Warranty, 6 Months
Part Number Description
4C-5637 10 mm (3/8 in) Female for Stud Type Batteries
4C-5638 10 mm (3/8 in) Male for Side Terminal Batteries

Cables
Warranty: Cat Standard Warranty, 6 Months
• Polarized plug on both ends
• Mates with either 4C-9917 or 4C-4943 Power Socket

Part Number Description Mates with

4C-9801 3.66 m (12 ft) 4 AWG 4C-4943 Power Socket
4C-9802 3.66 m (12 ft) 1 AWG 4C-9917 Power Socket

305
Battery Service Equipment
Battery Cable Repair Kit - 6V-3025
Warranty: Cat Standard Warranty, 6 Months
• Fabricate or repair 8 through 4/0 gauge electrical cables
• Install splices or terminals
• Crimping tool comes with multiple dies for various cable sizes (AWG No. 8, 6, 4, 2,
1/0, 2/0, 3/0, 4/0)
• Cable Cutter - can cut up to 500 MCM copper or aluminum cable
Reference
Special Instruction SMHS7677, Use of Battery Cable Repair Kit

Part Number Description Qty.

6V-3025 Battery Cable Repair Kit –
Battery Cable Repair Kit includes:
6V-3017 00 Butt Splice 4
6V-3018 0 Butt Splice 3
6V-3019 000 Butt Splice 3
6V-3020 0000 Butt Splice 2
6V-3021 Crimping Tool –
6V-3022 Cable Cutter –
6V-3023 Box –
Replacement Dies for 6V-3021
1U-6659 Left-Hand –
1U-6660 Right-Hand –

306
 Lighting and Electrical Products — Flashlights and Batteries
Mini-Maglite Flashlight
Warranty: Manufacturer, Lifetime
• For people on-the-go, can be carried on the hip in its own nylon belt holster
• Includes two AA batteries

Part Number Description Length

9U-7231 Mini-Maglite Flashlite 5 3/4 inches

Heavy-Duty Professional Flashlights

Warranty: Manufacturer, Lifetime
• High quality
• Designed and manufactured in the U.S.A.
• Precision machined, high strength aluminum exterior components
• Anodized internally and externally for optimum corrosion resistance
• Water resistant O-ring seals throughout protecting an internal self-actuating
switch
• Hi-impact, scratch resistant Lexan® lens
• Fast action Linear-Focusing™ flood-to-spot beam with a twist of the wrist
• Extra long lamp life, equivalent of 3 or 4 sets of batteries
• Approximately 5 to 6 hours operating time per set of batteries
• Ambient candle mode for hands free operation
• Spare lamp in tail cap
• Includes two AA size alkaline batteries (4C-9463), available worldwide
• All flashlights have Cat logo

Item Part Number Description Length Batteries

1 1U-7321 Flashlight 254 mm (10 in) long 2 D cell batteries (replacement lamp 4C-9464)
2 1U-7322 Flashlight 310 mm (12 3/16 in) long 3 D cell batteries (replacement lamp 4C-9465)
3 4C-9442 Flashlight 375 mm (14 3/4 in) long 4 D cell batteries (replacement lamp 4C-9466)
Accessories (Warranty: Six Months)
4 4C-9448(1) Mounting Clamp kit for all D cell flash- – –
lights, 2 clamps and screws

Heavy-Duty Professional Rechargeable Flashlight Accessories

Warranty: Cat Standard Warranty, 6 Months

Part Number Description

4C-9470 Halogen Replacement Bulb

1 Warranty: Caterpillar, Six Months

307
Lighting and Electrical Products — Flashlights and Batteries
Heavy-Duty Flashlights
Warranty: Cat Standard Warranty, 6 Months
• Water-resistant, made of high impact plastic, with corrosion resistant contact
parts and a belt ring to prevent loss
• Battery barrier protects bulb and head contacts from impact force
• Comes with spare bulb
• Batteries not included
Part Number Size Batteries Switch Comes with
1U-7319 210 mm (8 1/4 in) long 2 D cell batteries – –

Continuity Tester/Flashlight
Warranty: Cat Standard Warranty, 6 Months
• Made of high impact plastic
• Can be used as a flashlight or continuity tester
• Yellow with black cap
• Uses 2 D cell batteries (not included)
• 1.82 m (72 in) length continuity wires shipped inside flashlight
• Magnet allows your hands to be free for testing

Part Number Description Length

1U-7318 Continuity Tester / Flashlight 210 mm (8 1/4 in)
Service Part
1U-9532 D-Cell Alkaline Battery –

308
 Lighting and Electrical Products — Flashlights and Batteries
Inspection Light - 141-1655
Warranty: Manufacturer, Lifetime
• Lightweight, super compact light source
• White beam to penetrate smoke, fog and water
• Water-tight to 609.6 m (2000 ft)
• Shock proof, corrosion proof
• Economical, 30-hour long life lamp module
• Handy shirt clip
• Includes two AA batteries
• Includes 90° light bender

Part Number Description

141-1655 Inspection Light
Service Part
4C-6741 Lamp Module (Qty. 12) (2)

Industrial Batteries
Warranty: Cat Standard Warranty, 6 Months
Alkaline
• Top-of-the-line for maximum service life
• Best for use in high-drain, continuous use situations
Heavy-Duty
• Ideally suited for normal industrial use

Package
Part Number Description Voltage Quantity
1U-9531 C-Cell Alkaline Battery 1.5 72
1U-9532 D-Cell Alkaline Battery 1.5 72
1U-9533 AA Alkaline Battery , non-rechargeable, package qty 96 1.5 96
(5 required to power Indicator III)
1U-9534 Battery - 9V Size (not shown) 9 72
1U-9535 AAA-Cell Alkaline Battery 1.5 96
1U-9536 C-Cell Heavy-Duty Battery 1.5 72
1U-9537 D-Cell Heavy-Duty Battery 1.5 72
1U-9538 AA-Cell Heavy-Duty Battery 1.5 96
1U-9539 9 Volt Heavy-Duty Battery 9 72
245-3224 AAAA-Cell Alkaline Battery (3) 1.5 6

2 Warranty: Manufacturer’s, Lifetime

3 Warranty: Manufacturer, 120 Day

309
Lighting and Electrical Products — Flashlights and Batteries
Pen Light
Warranty: Manufacturer, 120 Day
European Union Compliant, CE marked
• Made from tempered aircraft aluminum
• 100,000 hour lifetime, hi-intensity light emitting diode (LED) bulb
• Batteries last up to 60 hours
• Includes 3 AAAA batteries
• Handy shirt clip
• Push end of pen light to momentarily illuminate or twist end clockwise for constant
"on"
• Waterproof

Part Number Description

238-8244 Pen Light, White LED
269-3123 Pen Light, Blue LED
Replacement Batteries
245-3224 (4) AAAA-Cell Alkaline Battery

Hi-Energy Battery Charger

Warranty: Cat Standard Warranty, 6 Months
• Charges one to four AA or AAA NiMH batteries in 30 minutes (up to 1850 mAh)
• "Smart Charger" — individually monitors cell condition and terminates charging
current when charged
• Includes "Trickle Charge" — low rate charge to retain charge level that would oth-
erwise be lost due to self-discharge and storage
• Illuminated LED monitoring lights
• Ideal for high-drain applications
• DC input 11-16V, 3A (AC adapter included)
• Should not be used to charge any other battery type other than NiMH
• Only charges one size of battery at a time (do not mix AA and AAA in same
charge)
• Includes 4 AA rechargeable batteries
AA Charge AAA Charge
Part Number Charge Capacity Capacity Capacity Charging Current Trickle Charge Charging Time AC Input Rating
261-0022 Charge capacity up to 2100 mAh up to 750 mAh Charging current Trickle charge 30 minutes (up to 110 volts (110
1850 mAh) volts)

4 Warranty: Manufacturer, 120 Day

310
 Lighting and Electrical Products — Flashlights and Batteries
AA Rechargeable Batteries
Warranty: Cat Standard Warranty, 6 Months
• Nickel-metal hydride (NiMH) batteries
• Ideal for the most advanced high-drain devices — digital cameras, personal digital
assistants (PDA's), voltmeters, flashlights, borescopes, analyzers, and many other
diagnostic service tools
• High-capacity cells provide exceptional power per charge and up to 1000
recharges
• Recharge to full power at any time
• New batteries should be charged for 24 hours before first use
• Good economic and environmental choice

Part Number Size Designation Voltage Average Capacity Qty.

261-0024 AA, 1.2 Volt ANSI-1.2H2 1.2 volts (1.20 volts) 2300 mAh 4 per package

Lantern Battery
Warranty: Cat Standard Warranty, 6 Months
• Offers dependable high performance for portable lighting uses
• Recommended for all industrial lanterns

Part Number Description Package Quantity

1U-9547 Lantern Battery, Spring Terminal, 6 Volt 12

311
Lighting and Electrical Products — Work Lights and Extension Cords
Portable Fluorescent Work Lights
Warranty: Manufacturer, One Year
• 13 Watt fluorescent lamp is equivalent in light output to a 60 Watt incandescent,
but four times more efficient and will last up to 10 times longer (10,000 hours)
• Built with the Saf-T-Lite design concept which places light and all electrical com-
ponents inside a closed chamber for user safety
• Protected on-off switch can be operated by depressing domed end of the light
• Entire light double insulated for user safety
• Oil resistant power cord , UL listed and meets OSHA standards
• Durable and shatter resistant butyrate outer tube gives long life
• 4C-6478 and 4C-6479 include magnetic mounts and vapor clips

Part Number Description Length Cord Type Voltage/Watt Standard Color

4C-6477 Portable Florescent Work Light 7.62 m (25 ft) Cord SJTO 18/2 110V/13 Watt Yellow
4C-6478 Portable Florescent Work Light 15.24 m (50 ft) Cord SJTO 18/2 110V/13 Watt Yellow
4C-6479 Portable Florescent Work Light 12.19 m (40 ft) Reel SJT 18/2 110V/13 Watt Yellow
9U-7203 Portable Florescent Work Light 9.5 m (30 ft) Cord SJTOW-A 18/2 12V/13 Watt Yellow
Service Parts for 9U-7203
9U-6712 Replacement Lamp, 12V, 13 Watt – – – –

Accessories for Light Assemblies

Warranty: Manufacturer, One Year
Part Number Description Material
9U-6009 Fluorescent Lamp, 110V/13 Watt Twin Tube, cool
white light emission
9U-6010 Magnetic Mount 26.3 kg (58 lb) pull Nickel plated magnet

Fluorescent Light Kit

Warranty: Manufacturer, One Year
• 110V kit which includes 13 Watt lamp, outer tube, switch assembly and installa-
tion instructions
• Install onto any Saf-T-Lite reel or cordset which was originally equipped with a
110V/13 Watt "Stubby" light head, such as 4C-6477, 4C-6478 or 4C-6479

Part Number Description

9U-6710 Fluorescent Light Kit
Replacement Parts
9U-6009 Fluorescent Lamp, 110V/13 Watt
9U-6708 Clear Outer Tube

312
 Lighting and Electrical Products — Work Lights and Extension Cords
Ratchet Light
Warranty: Cat Standard Warranty, 6 Months
• 120 Volt/60 Hz light made from yellow, unbreakable aerospace plastic with a 10
amp tool-tap-plug
• 10,000 hour life, 13 Watt rough-service fluorescent bulb delivers output of a 60
Watt incandescent bulb
• STOW type cord — used for heavy duty service and with oil-resistant, thermo-
plastic jacket, is weather resistant for outdoor use
• Two year warranty on workmanship and material defects (not including bulb)
• Handy magnetic base so you can position the light where you need it
• UL Approved

Part Number Description Cord Type

179-7043 Ratchet Light STOW Type Cord - 7.62 m (25 ft) long,
made from 16/3 wire

Angle Light Reel

Warranty: Cat Standard Warranty, 6 Months
• 120 Volt/60 Hz light (yellow) includes shatter/scratch resistant lens, 10 amp tool-
tap-plug, and velcro magnet
• 10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60
Watt incandescent bulb
• Black reel made from shatter resistant ABS plastic
• STOW type cord — used for heavy duty service and with oil-resistant, thermo-
plastic jacket, is weather resistant for outdoor use
• Two year warranty on workmanship and material defects (not including bulb)
• UL Approved

Part Number Description Cord Type

179-7046 Angle Light Reel STOW Type Cord - 15.2 m (50 ft) long, made from 16/3 wire
Parts
179-7048 Lens –
179-7049 Bulb –
179-7050 Velcro Magnet –

313
Lighting and Electrical Products — Work Lights and Extension Cords
Angle Light
Warranty: Cat Standard Warranty, 6 Months
• 120 Volt/60 Hz light includes shatter/scratch resistant lens, 10 amp tool-tap-plug,
and velcro magnet
• 10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60
Watt incandescent bulb
• Yellow case is made from unbreakable aerospace plastic
• STOW type cord — Used for heavy duty service and with oil-resistant, thermo-
plastic jacket, is weather resistant for outdoor use
• Two year warranty on workmanship and material defects (not including bulb)
• UL Approved

Part Number Description Cord Type

179-7047 Angle Light STOW Type Cord - 7.62 m (25 ft) long, made from 16/3 wire
Parts
179-7048 Lens –
179-7049 Bulb –
179-7050 Velcro Magnet –

Triple-Tap Extension Cord

Warranty: Cat Standard Warranty, 6 Months
• 120 Volt/60 Hz reel extension cord is 15.2 m (50 ft) long, made from 16/3 wire with
a built-in 10 amp circuit breaker
• Case is made from shatter resistant ABS plastic
• Two year warranty on workmanship and material defects
• UL Approved

Part Number Description

179-7053 Triple-Tap Extension Cord

314
 Lighting and Electrical Products — Work Lights and Extension Cords
Light Rover
Warranty: Cat Standard Warranty, 6 Months
• 120 Volt/60 Hz light has large, shock-absorbent, easy-grip end caps and a
scratch/shatter resistant lens
• 10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60
Watt incandescent bulb
• Unique plug base converts any extension cord into a light
• Two year warranty on workmanship and material defects (not including bulb)
• UL Approved

Part Number Description

179-7054 Light Rover
Parts
179-7049 Bulb

Work Light
Warranty: Cat Standard Warranty, 6 Months
• 120 Volt/60 Hz light includes large, shock-absorbent, easy-grip end caps, and a
scratch/shatter resistant lens
• 15 Watt rough service fluorescent bulb delivers output of an 80 Watt incandes-
cent bulb
• STOW type cord — Used for heavy duty service and with oil-resistant, thermo-
plastic jacket, is weather resistant for outdoor use
• Two year warranty on workmanship and material defects (not including bulb)
• UL Approved

Part Number Description Cord Type

179-7056 Work Light STOW type Cord - Cord is 7.62 m (25 ft) long, made from 18/2 wire
179-7058 Bulb –

315
Lighting and Electrical Products — Work Lights and Extension Cords
Electrical Cord Definitions
Abbreviations
U.L. Underwriters Laboratories
C.U.L. Canadian Underwriters Laboratories
O.S.H.A. Office of Safety and Health Administration
NEMA National Electrical Manufacturers Association
Cord Designation by Letter
"S" Hard surface, flexible cord, general use
"J" 300 Volt cord or smaller
"E" Elastic synthetic rubber, good low temp cord
"W" Watertight cord
"O" Oil resistant
"A" Low-temperature rated
"T" Thermo-grade plastic

Heavy-duty Contractor and Industrial Application Extension Cords

Warranty: Cat Standard Warranty, 6 Months
• Designed for heavy-duty use by contractors and industrial applications
• Outer jacket protects against rough handling and extreme weather conditions
• Provides superior resistance to sunlight, ozone, cracking, oils chemicals, and
moisture
• All cords have Cat logo printed on cord
• All extension cords are UL (Underwriters Laboratory) listed and meet OSHA (Of-
fice of Safety and Health Administration) requirements
• All plugs and outlets are NEMA (National Electrical Manufacturers Association)
designated — 5-15P plug and 5-15R outlet
Voltage
Part Number Length Material Outlet Wire Size Rating(1) Rating Operating Temperature
241-8522 25.00 ft all-weather vinyl single 12 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
241-8529 50.00 ft all-weather vinyl single 12 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
241-8530 100.00 ft all-weather vinyl single 12 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
243-1874 25.00 ft all-weather vinyl triple 12 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
243-1875 50.00 ft all-weather vinyl triple 12 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
243-1876 100.00 ft all-weather vinyl triple 12 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
243-1877 25.00 ft all-weather vinyl triple 10 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
243-1878 50.00 ft all-weather vinyl triple 10 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)
243-1879 100.00 ft all-weather vinyl triple 10 gauge, 3 conductor SJTOW 300 volts -35 to 60°C (-31 to 140°F)

1 (S) Hard Surface, Flexible Cord, General Use; (J) 300 Volt cord or smaller; (W) Watertight Cord; (O) Oil Resistant; (T) Thermo Grade
Plastic

316
 Lighting and Electrical Products — Work Lights and Extension Cords
Heavy-Duty Connectors and Plugs (20-30 Amps) with Insulating Cord Grip
Warranty: Manufacturer’s
• For use in construction sites, industrial, dusty, and damp environments
• For use with tools, motors, grinding machines, high pressure washers, outdoor
lighting
• UL and CSA listed

Part Number Type Description Cord Diameter

9U-6374 20 Amp, 125/250V Connector Yellow High Impact, with 14.27 - 26.97 mm (.562 in - 1.062 in)
Insulating Cord Grip
9U-6378 30 Amp, 125V Connector Yellow High Impact, with 15.875 - 28.575 mm (.625 in - 1.125 in)
Insulating Cord Grip
9U-6379 30 Amp, 125V Plug Yellow High Impact, with 15.875 - 28.575 mm (.625 in - 1.125 in)
Insulating Cord Grip

317
Lighting and Electrical Products — Miscellaneous
Rubber Splicing Compound
Warranty: Cat Standard Warranty, 6 Months
• Linerless rubber tape
• Use for insulating and sealing on electrical cable installation and repair

Part
Number Description Size Qty.
4C-6393 Rubber Splicing 19 mm (3/4 in) wide x 0.8 mm (0.030 in) 1 roll per
Compound thick x 4.6 m (15 ft) long rolls package

Wire Marker Tape Dispenser

Warranty: Cat Standard Warranty, 6 Months
• Provides a fast, convenient system for marking wire or cable
• Helps eliminate errors in the disassembly and assembly of hydraulic lines, wiring
harness, generator sets and panels
• Ten refillable compartments with numbers from 0 to 9 let you choose the exact
number/letter combinations needed
• Easy to use, easy to carry; convenient rolls — easy cutoff, no waste
• Tapes are an epoxy film with an acrylic adhesive
• Highly resistant to oils and solvents

Part Number Description

6V-7939 Wire Marker Tape Dispenser
Marker Tape Replacement Rolls (10 rolls per box)
8T-5209 Tape No. 0
8T-5211 Tape No. 1
8T-5212 Tape No. 2
8T-5213 Tape No. 3
8T-5214 Tape No. 4
8T-5215 Tape No. 5
8T-5216 Tape No. 6
8T-5217 Tape No. 7
8T-5218 Tape No. 8
8T-5219 Tape No. 9

318
 Lighting and Electrical Products — Miscellaneous
Crimping Tools
Warranty: Cat Standard Warranty, 6 Months
• For insulated and uninsulated ferrules

Part Number Wire Gauge

139-2788 24-12 AWG
139-2789 10-6 AWG
386-5102 28-24, 24-20, 18-16

Heat Shrinking Tubing

Warranty: Cat Standard Warranty, 6 Months
• Made from polyolefin
• Effectively resists abrasion, scoring, cut-through, and the effects of long term
aging
• Easy to install
• Use on inline electrical splices to provide mechanical protection as well as corro-
sion and moisture seal

Recovered Package
Part Number Expanded I.D. Recovered I.D. Length Quantity
4C-6387 10 mm (.400 in) 3.8 mm (0.15 in) 152 mm (6 in) 25
4C-6388 20 mm (.800 in) 5.0 mm (0.20 in) 152 mm (6 in) 5
4C-6389 28 mm (1.10) 9.4 mm (0.37 in) 229 mm (9 in) 5
4C-6390 388 mm (1.50 in) 12.7 mm (0.50 in) 229 mm (9 in) 5
4C-6391 51 mm (2.00 in) 16.5 mm (0.65 in) 229 mm (9 in) 1

Heat Shrinking Butt Connector

Warranty: Cat Standard Warranty, 6 Months
• One piece, pre-insulated
• Use on inline electrical splice where moisture and corrosion are a concern
• Easy application

Package
Part Number Wire Barrel Length (L) I.D. Color Quantity
4C-6394 #22 to 18 AWG .28 .062 Red 100
4C-6395 #16 to 14 AWG .30 .095 Blue 100
4C-6396 #12 to 10 AWG .38 .142 Yellow 100

319
Lighting and Electrical Products — Miscellaneous
Cold Shrink Insulators
Warranty: Cat Standard Warranty, 6 Months
• Rubber insulators can be used on cable to insulate as well as to protect from
moisture and corrosion while remaining flexible
• Resists fungus, acids and alkalies, ozone and ultra-violet light
• Easy to install (no flame/torch needed) — unwind the expander core by pulling
the insulator and tubing will shrink to cable diameter
• When shrunk, connection is water resistant
• Very portable since no heat source is required

Part Number Minimum Diameter Tube Max. Relaxed Package Length Qty.
4C-6382 2.5 mm (0.10 in) 21.6 mm (0.85 in) 203 mm (8 in) 1
4C-6383 10.6 mm (0.42 in) 21.6 mm (0.85 in) 203 mm (8 in) 1
4C-6384 13 mm (0.51 in) 25.4 mm (1 in) 229 mm (9 in) 1
4C-6385 17.5 mm (0.69 in) 33 mm (1.30 in) 304.8 mm (12 in) 1
4C-6386 24.1 mm (0.95 in) 48.3 mm (1.90 in) 304.8 mm (12 in) 1

Wedge Removal Tool

Warranty: Cat Standard Warranty, 6 Months
• Use to remove wedges from DT series Deutsch connectors

Part Number Description

147-6456 Wedge Removal Tool (included in kit)

Straight Blade Plugs and Connectors

Warranty: Manufacturer’s
• For use in construction sites, industrial, dusty, and damp environments
• For use with tools, motors, grinding machines, high pressure washers, outdoor
lighting
• UL and CSA listed

Part Number Type Description

9U-6362 15 Amp, 125V AC Connector 2 Pole, 3 Wire, NEMA 5-15P
9U-6363 15 Amp, 125V AC Plug 2 Pole, 3 Wire, NEMA 5-15P
9U-6364 15 Amp, 250V AC Connector 2 Pole, 3 Wire, NEMA 6-15P
9U-6366 20 Amp, 125V AC Connector 2 Pole, 3 Wire, NEMA 5-20P
9U-6368 20 Amp, 250V AC Connector 2 Pole, 3 Wire, NEMA 6-20P
9U-6369 20 Amp, 250V AC Plug 2 Pole, 3 Wire, NEMA 6-20P

320
 Lighting and Electrical Products — Miscellaneous
Sure Seal Series Field Service Kit
Warranty: Cat Standard Warranty, 6 Months
• Make or repair custom connectors
• Easy to assemble
• Forms a water, chemical, and grime resistant seal
• Wide variety of circuit configurations
• Tested from -40°C to 105°C (-40°F to 221°F)
• Designed for 14 to 18 gauge wire carrying up to 15 Amps
Reference
Special Instruction SMHS7531, Use of Sure Seal Repair Kit

Part Number Qty. Description Size

6V-3000 1 Sure Seal Field Service Kit –
Sure Seal Field Service Kit Consists of
6V-3001 1 Sure Seal Crimping Tool –
6V-3007 1 Divided Box w/ Hinged Lid
6V-3008 1 Insertion Tool –
7N-7779 100 Socket Connector 14 - 18 AWG
7N-7780 100 Pin Connector 14 - 18 AWG
9G-3695 50 Sealing Plug
1 Connector
7N-7777 3 Socket Housing –
7N-7778 3 Plug Housing –
2 Connector
7N-9737 3 Plug Housing –
7N-9738 3 Socket Housing –
3 Connector
7N-7781 3 Socket Housing –
7N-7782 3 Plug Housing –
4 Connector
7N-8204 3 Socket Housing –
7N-8205 3 Plug Housing –
5 Connector
9G-3672 1 Plug Housing –
9G-3678 1 Socket Housing –
6 Connector
9G-3671 1 Plug Housing –
9G-3677 1 Socket Housing –
7 Connector
9G-3670 – Plug Housing –
9G-3676 1 Socket Housing –
8 Connector
9G-3669 1 Plug Housing –

321
Lighting and Electrical Products — Miscellaneous
Sure Seal Series Field Service Kit (Cont'd.)
Part Number Qty. Description Size
9G-3675 1 Socket Housing –
9 Connector
9G-3668 1 Plug Housing –
9G-3674 1 Socket Housing –
10 Connector
9G-3667 1 Plug Housing –
9G-3673 1 Socket Housing –

322
 Personal Protective Equipment — Gloves
Utility Glove
Warranty: Cat Standard Warranty, 6 Months
• Black
• Synthetic Leather Palm
• Synthetic Leather Fingertips
• Spandex Back
• Lighter and More Durable than Leather
• More Breathable than Leather
• Reinforced Thumb
• Adjustable Wrist Strap
• CE marked, EN388: 2211, AS/NZS2161.2

Part Number Size

377-5750 Medium
377-5751 Large
377-5752 Extra Large

Utility Gloves
Warranty: Cat Standard Warranty, 6 Months
• Help protect from heat, cold, nicks, cuts, and bruises
• Split-palm design ensures long life in high-wear areas
• Hidden seam design eliminates snagging
• Tough spandex top material resists snags
• Snug, comfort fit assures greater dexterity
• NOT flame-proof or fire retardant
• Machine washable, air dry (Do NOT machine dry)

Part Number Size Qty.

276-0491 Medium Bulk - 6 pair
276-0492 Large Bulk - 6 pair
276-0493 Extra Large Bulk - 6 pair
276-0494 XX Large Bulk - 6 pair

323
Personal Protective Equipment — Gloves
Impact Gloves
Warranty: Cat Standard Warranty, 6 Months
• Design features improved dexterity and glove life
• Compression-molded Airprene knuckle and index finger protection
• Seamless index finger for great fingertip control
• Streamlined thermal plastic rubber (TPR) hook and loop fastening on cuff
• Split palm design puts 1 mm material in all high wear areas
• 3 mm gel palm padding reduces vibrations
• NOT flame-proof or fire retardant
• Machine washable, air dry (do NOT machine dry)

Part Number Size Qty.

276-0499 Medium Bulk - 6 pair
276-0500 Large Bulk - 6 pair
276-0501 Extra Large Bulk - 6 pair
276-0502 XX Large Bulk - 6 pair

Insulated Gloves
Warranty: Cat Standard Warranty, 6 Months
• Improved thermal protection
• Unique combination of Velboa and micro fleece layer closest to skin for warmth
• Neoprene cuff design with streamlined thermal plastic rubber (TPR) hook and
loop fastening
• Compression-molded neoprene knuckle and index finger protection
• Durable synthetic leather palm
• NOT flame-proof or fire retardant
• Machine washable, air dry (do NOT machine dry)

Part Number Size Qty.

276-0495 Medium Bulk - 6 pair
276-0496 Large Bulk - 6 pair
276-0497 Extra Large Bulk - 6 pair
276-0498 XX Large Bulk - 6 pair

324
 Personal Protective Equipment — Gloves
Fingerless Gloves
Warranty: Cat Standard Warranty, 6 Months
• Protect hands while having full fingertip access
• Palm padding of 3 mm shock-absorbing gel
• Hidden seam design eliminates snagging
• Tough spandex top material resists snags
• Snug, comfort fit assures greater dexterity
• NOT flame-proof or fire retardant
• Machine washable, air dry (do NOT machine dry)

Part Number Size Qty.

276-0487 Medium Bulk - 6 pair
276-0488 Large Bulk - 6 pair
276-0489 Extra Large Bulk - 6 pair
276-0490 XX Large Bulk - 6 pair

Padded Utility Glove

Warranty: Cat Standard Warranty, 6 Months
• Yellow and Black
• Synthetic Leather Palm
• Synthetic Leather Fingertips
• Spandex Back
• Padded Palm
• Breathable Mesh
• Adjustable Wrist Strap
• CE marked, EN388: 1121, AS/NZS2161.2

Part Number Size

377-5737 Medium
377-5738 Large
377-5739 X Large
377-5740 XX Large
377-5741 XXX Large

325
Personal Protective Equipment — Gloves
High Visibility Padded Utility Glove
Warranty: Cat Standard Warranty, 6 Months
• High-Visibility Green
• Synthetic Leather Palm
• Synthetic Leather Fingertips
• Reflective Tape Fingertips and Knuckle Strap
• Nylon Black
• Padded Palm
• Reflective Tape
• Adjustable Wrist Strap
• CE marked, EN388: 1121, AVS/NZS

Part Number Size

377-5734 Medium
377-5735 Large
377-5736 X Large

Water-Resistant Utility Glove

Warranty: Cat Standard Warranty, 6 Months
• Gray
• Synthetic Leather Palm
• Neoprene Back
• Padded Palm
• Reinforced Thumb
• Silicone Grip Fingers
• Reflective Piping
• Adjustable Wrist Strap
• CE marked, EN388: 1121, AVS/NZS

Part Number Size

377-5753 Medium
377-5754 Large
377-5755 X Large

326
 Personal Protective Equipment — Gloves
Leather-Driver Glove
Warranty: Cat Standard Warranty, 6 Months
• Unlined
• Double-Stitched
• Palm Patch
• Ball and Tape Closure
• Gunn Cut with Keystone Thumb
• CE marked, EN388: 3122, AVS/NZS

Part Number Size

377-5742 Medium
377-5743 Large
377-5744 X Large
377-5745 XX Large
377-5746 XXX Large

High-Visibility Leather Driver Glove

Warranty: Cat Standard Warranty, 6 Months
• High-Visibility Green
• Pearl Grain Pigskin Leather
• Gunn Cut with Wing Thumb
• Elastic Wrist
• CE marked, EN388: 4122, AVS/NZS

Part Number Size

377-5732 Large

High-Visibility Leather Palm Glove

Warranty: Cat Standard Warranty, 6 Months
• High-Visibility Green
• Grain Pigskin Leather
• Finger Tips and Knuckle Strap
• Gunn Cut with Wing Thumb
• Rubberized Safety Cuff
• Elastic Wrist
• CE marked, EN388: 4122, AVS/NZS

Part Number Size

377-5733 Large

327
Personal Protective Equipment — Gloves
Fingerless Leather Glove
Warranty: Cat Standard Warranty, 6 Months
• Black
• Reversed Pigskin Leather Palm
• Spandex Black
• Breathable
• Double-Stitched
• Adjustable Wrist Strap
• CE marked, EN388: 1220, AS/NZS2161.2

Part Number Size

377-5756 Medium
377-5757 Large
377-5758 X Large

Unlined Grain Leather Driver's Gloves

Warranty: Cat Standard Warranty, 6 Months
• For drivers, utility, and warehouse workers
• Gunn cut pattern
• Keystone thumb
• Pull-strap closure
• CE-marked, meets EN388, AVS/NZS
• Package of 12

Part Number Size

282-9529 Large
282-9530 Extra Large

Lined Leather Driver's Gloves

Warranty: Cat Standard Warranty, 6 Months
• For drivers, utility and warehouse workers
• Extra warmth
• Elastic shirred back holds glove securely to hand
• Gunn cut pattern

Part Number Size Qty.

246-5147 Extra Large 12 Pair with Hang Tags
246-5149 Large 12 Pair with Hang Tags
246-5151 Medium 12 Pair with Hang Tags

328
 Personal Protective Equipment — Gloves
Split Leather Palm Gloves
Warranty: Cat Standard Warranty, 6 Months
• For tough rugged jobs
• Full leather index finger
• Lined palm and leather tips
• Gauntlet cuff style
• Elastic on back with knuckle strap

Part Number Size Qty.

246-5155 Large 12 Pair with Hang Tags

Split Cowhide Palm Gloves

Warranty: Cat Standard Warranty, 6 Months
• For medium- to heavy-duty work
• Gunn cut pattern
• Full leather index finger
• Wing thumb

Part Number Size Qty.

282-9531 Medium Bulk - 12 Pair
282-9532 Large Bulk - 12 Pair
282-9533 Extra Large Bulk - 12 Pair

Traditional All-purpose Gloves

Warranty: Cat Standard Warranty, 6 Months
• For general work
• Cotton blend
• Knit wrist cuff
• Plastic dots on inner side and back of index finger

Part Number Size Qty.

246-5163 Large Bulk - 12 Pair

329
Personal Protective Equipment — Gloves
Fleece-Lined Dotted Jersey Glove
Warranty: Cat Standard Warranty, 6 Months
• Black
• Cotton Jersey
• Fleece Lined
• PVC Dotted Palm and Fingers
• Gunn Cut with Continuous Thumb
• Open Cuff
• CE marked, EN388: 0221, AS/NZS2161.2

Part Number Size

377-5747 Large

Dotted Jersey Glove

Warranty: Cat Standard Warranty, 6 Months
• Black
• Cotton Jersey
• Micro-Dotted Palm and Fingers
• Gunn Cut with Continuous Thumb
• Knit Wrist
• CE marked, EN388: 1111, AS/NZS2161.2

Part Number Size

377-5748 Medium
377-5749 Large

Jersey Gloves
Warranty: Cat Standard Warranty, 6 Months
• For general purpose use
• Soft knit fabric
• Stretch to provide excellent fit
• CE marked, EN388

Part Number Size Qty.

246-5165 Large 12 Pair with Hang Tags
385-5557 Large Bulk - 144 Pairs

330
 Personal Protective Equipment — Gloves
Fleeced Gloves
Warranty: Cat Standard Warranty, 6 Months
• For outside work
• Knit wrist cuff
• Double layer of fabric
• Added warmth

Part Number Size Qty.

246-5167 Large Bulk - 12 Pairs

Leather Welding Gloves

Warranty: Cat Standard Warranty, 6 Months
• One piece back fully welted
• Color: Gold

Part Number Size Qty.

247-4447 Large Single Pair

Chemical-resistant Nitrile Gloves

Warranty: Cat Standard Warranty, 6 Months
NOTE:
When using gloves as Personal Protection Equipment (PPE), always consult the Ma-
terial Safety Data Sheet (MSDS) for the chemical that is being handled for the most
appropriate glove.
• Protect against cuts, abrasions, punctures, and snags
• Embossed texture improves grip
• Will not swell or weaken like rubber or neoprene in solvents and fats

Part Number Size Thickness Application Chemical Resistance Qty.

4C-5522 L 15 mil Chemical Handling Acids, Solvents, Caustics, Oils, Sodium Hydroxide, Freon, Xylene, Hydro-chlor- Bulk -
Grease, Degreasing Machine operations using cut- ic Acid, Stoddard Solvent, Potassium Hydrox- 12
ting oil, metal fabrication ide, Perchloroethylene, Phosphoric Acid Pair
4C-5523 XL 22 mil Chemical Handling Acids, Solvents, Caustics, Oils, Sodium Hydroxide, Freon, Xylene, Hydro-chlor- Bulk -
Grease, Degreasing Better protection than 4C-5522 ic Acid, Stoddard Solvent, Potassium Hydrox- 12
due to thickness. ide, Perchloroethylene, Phosphoric Acid Pair

331
Personal Protective Equipment — Gloves
Neoprene-coated Gloves
Warranty: Cat Standard Warranty, 6 Months
• For working with acids, solvents, oils, caustics and greases
• High cut resistance compared to rubber and vinyl
• Good from 46°C to 149°C (-50°F to 300°F)

Part Number Size Qty.

246-5164 Large 12 Pair

Nitrile-coated Knit-lined Gloves

Warranty: Cat Standard Warranty, 6 Months
• For dry and light oil applications
• Resistance to cuts and abrasions
• Porous coating is soft and flexible
• Excellent grip
• CE Cat. 11
NOTE: When using gloves as Personal Protection Equipment (PPE), always consult
the Material Safety Data Sheet (MSDS) for the chemical that is being handled for the
most appropriate glove.

Part Chemical
Number Size Qty. Application Resistance
4C-5526 Large 12 pair per package Light to medium duty, general purpose, fabrica- Oil, Grease
tion, assembly, maintenance, shipping, and re-
ceiving. Excellent grip in light oil applications.

Neox Gloves with Neoprene Coating

Warranty: Cat Standard Warranty, 6 Months
• Resistance to cuts, abrasions, and chemicals
• Interlock knit lining enhances puncture and snag resistance
• Two-piece lining eliminates irritating seams
NOTE: When using gloves as Personal Protection Equipment (PPE), always consult
the Material Safety Data Sheet (MSDS) for the chemical that is being handled for
the most appropriate glove.

Part
Number Size Qty. Application Chemical Resistance
4C-5527 One size 12 pair per Resists Heat, Cutting, Use in Plating, Acids, Solvents, (Ex.:Glycol Ether),
fits most package Galvanizing Degreasing, Oils, Caustics, Soaps, Alcohols
Petrochemicals

332
 Personal Protective Equipment — Gloves
Neoprene-coated Knit-lined Gloves
Warranty: Cat Standard Warranty, 6 Months
• For full-arm protection when using chemicals
• Broad protection against cuts and abrasions
• Resist oils, caustics, acids, alcohol, and solvents
• Fabric lining enhances puncture and snag resistance
• CE Marked, EN388:3222, EN511:121, EN374, EN374:AKL, EN407:43XXXX
NOTE: When using gloves as Personal Protection Equipment (PPE), always consult
the Material Safety Data Sheet (MSDS) for the chemical that is being handled for
the most appropriate glove.

Part
Number Size Qty. Application Chemical Resistance
4C-5529 One size Single Pair Resists Heat, Cutting, Use in Plating, Acids, Solvents, (Ex:Glycol Ether),
fits most Galvanizing, Sandblasting Cabinet Oils, Caustics, Soaps, Alcohols

Best Nitrile Disposable Gloves

Warranty: Cat Standard Warranty, 6 Months
• 0.10 mm thick
• Powder free
• Rolled Cuff keeps dirt out
• Low allergy risk
• Smooth finish
• Box of 100
• CE marked, Cat 1

Part Number Size

381-7612 Medium
381-7613 Large
381-7614 X Large

Disposable Powder-Free Nitrile Gloves

Warranty: Cat Standard Warranty, 6 Months
• Superior resistance to abrasives, chemicals, and punctures
• Contains no latex
• 5 mil thick
• CE Marked, meets EN 388:1994 and EN 374-3:1994

Part Number Description Size Qty.

246-5180 Powder-Free Large 100 per box
259-7007 Powder-Free Medium 100 per box
259-7008 Powder-Free Extra Large 100 per box

333
Personal Protective Equipment — Gloves
Disposable Powdered Nitrile Gloves
Warranty: Cat Standard Warranty, 6 Months
• Superior resistance to abrasives, chemicals, and punctures
• Contains no latex
• 5 mil thick
• CE Marked, meets EN 388:1994 and EN 374-3:1994

Part Number Description Size Qty.

246-5179 Powdered Large 100 per box
259-7005 Powdered Medium 100 per box
259-7006 Powdered Extra Large 100 per box

Disposable Latex Gloves

Warranty: Cat Standard Warranty, 6 Months
• For working with chemicals
• Extra stretch for best fit
• Excellent sensitivity touch
• Seamless construction
• Rubber latex
• 5 mil thick, 10 in long
• CE-marked, meets EN388: 1994 and EN374-3: 1994

Part Number Size Qty.

246-5181 Large 100 per box
260-1779 Extra Large 100 per box

Nitrile Coated Glove

Warranty: Cat Standard Warranty, 6 Months
• Yellow
• Nitrile-coated Nylon
• Ajustable wrist strap
• CE marked, EN388: 3121, AS/NZS2161.2

Part Number Size

377-5759 Medium
377-5760 Large
377-5761 X Large

334
 Personal Protective Equipment — Gloves
High-Visibility Nitrile Coated String Knit Glove
Warranty: Cat Standard Warranty, 6 Months
• High-Visibility Green
• Latex-Coated String Knit
• Textured for enhanced grip
• Cold Resistant
• Adjustable Wrist Strap
• CE marked, EN388: 2243, AS/NZS2161.2

Part Number Size

377-5762 Medium
377-5763 Large
377-5764 X Large

Nitrile Coated Bamboo Glove

Warranty: Cat Standard Warranty, 6 Months
• Made of sustainable materials
• More comfortable and tougher than other fabrics
• Bamboo also breathes better, wicks away more moisture, and is cooler
• CE marked, EN388

Part Number Size

385-5553 Large
385-5554 X Large
385-5555 XX Large

Cut Resistant Gloves, Level 2

Warranty: Cat Standard Warranty, 6 Months
• Lycra and Kevlar glove with Nitrile coated palm
• Strong and flexible
• Knit wrist
• ANSI cut level 2 protection
• CE marked, EN388:

Part Number Size

381-7607 Medium
381-7608 Large
381-7609 X Large

335
Personal Protective Equipment — Gloves
Cut Resistant Gloves, Level 4
Warranty: Cat Standard Warranty, 6 Months
• Made of high performance polyethylene (HPPE), nylong and Spandex with a poly-
urethane coated palm
• Better gripping than nitrile coated gloves
• Strong and flexible
• Comfortable with excellent feel
• Breathable
• Knit wrist
• ANSI cut level 4 protection
• ANSI abrasion level 5 protection
• CE EN 388, EN 407

Part Number Size

381-7611 Cut Resistant Gloves - Level 4

Nylon Gloves with Nitrile Coating

Warranty: Cat Standard Warranty, 6 Months
• For maintenance/assembly and shipping/receiving
• Excellent cut and abrasion resistances
• Good alternative to heavy cotton-coated gloves

Part Number Size Qty.

247-6412 Large 12 Pair with Hang Tags
247-6413 Extra-Large 12 Pair with Hang Tags

336
 Personal Protective Equipment — Safety Vests
Safety Vests
Warranty: Cat Standard Warranty, 6 Months
262-9301 Lime Green Mesh Safety Vest
• Non-reflective, lime green color
• Front hook and loop closure with black cloth binding
• One size fits all
• Material: 100% polyester mesh
262-9176 Orange Mesh Safety Vest
• Non-reflective, dayglow orange color
• Front hook and loop closure
• Elastic side straps
• One size fits all
• Material: 100% polyester mesh

Part Number Description Color Material

262-9176 Safety Vest Orange Polyester Mesh
262-9301 Safety Vest Lime Green Polyester Mesh

337
Personal Protective Equipment — Eye Protection
Cat Safety Glasses - Tread
Warranty: Manufacturer, 1 Year
• Lightweight and stylish
• Soft, vented nose piece
• Cushioned temple arms
• Three position adjustable temples with a snap-lock positioning
• Wrap lens
• Lenses and temples flex for a comfortable fit
• Full frames with vented top and bottom
• Crystal clear polycarbonate lenses
• Anti-scratch/anti-fog coating
• Weight - 1 oz (29 g)
• Retail Box and Packaging
• Cat branded
• ANSI Z87.1:2003, AS/NZS 1337:1992, CE marked, EN 166:2001, CSA Z94.3:2007

Part Number Lens Type Package Quantity

396-2013 Clear 10
396-2014 Smoke 10
396-2015 Blue Mirror 10

Cat Safety Glasses - Dozer

Warranty: Manufacturer, 1 Year
• Lightweight and stylish
• Rubber grip nose piece
• Four position adjustable temples with a snap-lock positioning
• Sides extendable by 0.5 in (12 mm)
• Lenses and temples flex for a comfortable fit
• 180 degree high wrap around style lens
• Crystal clear polycarbonate lenses
• Anti-scratch/anti-fog coating
• Weight - 0.84 oz (24 g)
• Retail Box and Packaging
• Cat branded
• ANSI Z87.1:2003, AS/NZS 1337:1992, CE marked, EN 166:2001, CSA Z94.3:2007

Part Number Lens Type Package Quantity

396-2010 Clear 10
396-2011 Smoke 10
396-2012 Blue Mirror 10

338
 Personal Protective Equipment — Eye Protection
Cat Safety Glasses - Track
Warranty: Manufacturer, 1 Year
• Lightweight and stylish
• Lenses and temples flex for a comfortable fit
• 180 degree high wrap around style lens
• Soft tips
• Crystal clear polycarbonate lenses
• Anti-scratch/anti-fog coating
• Weight - 0.88 oz (25 g)
• Retail Box and Packaging
• Cat branded
• ANSI Z87.1:2003, AS/NZS 1337:1992, CE marked, EN 166:2001, CSA Z94.3:2007

Part Number Lens Type Package Quantity

396-2007 Clear 10
396-2008 Smoke 10
396-2009 Yellow 10

Cat Safety Glasses - Mortar

Warranty: Manufacturer, 1 Year
• Lightweight
• Lenses and temples flex for a comfortable fit
• 180 degree high wrap around style lens
• Crystal clear polycarbonate lenses
• Anti-scratch/anti-fog coating
• Weight - 0.811 oz (23 g)
• Retail Box and Packaging
• Cat branded
• ANSI Z87.1:2003, AS/NZS 1337:1992, CE marked, EN 166:2001, CSA Z94.3:2007

Part Number Lens Type Package Quantity

396-2005 Clear 10
396-2006 Smoke 10

339
Personal Protective Equipment — Eye Protection
Cat Safety Glasses - Grit
Warranty: Manufacturer’s one year
• Super lightweight, fashion sunglasses styling
• Nylon frames with injected rubber temples and nose pad
• 180-degree high wrap around style lens
• High wrap molded lenses for optimal protection
• Crystal clear polycarbonate lenses
• Anti-scratch/anti-fog coating
• Weight – 1.05 oz (30g)
• Retail Box and Packaging
• Cat branded
ANSI Z87.1:2010, AS/NZS 1337:1, CE marked, CSA Z94.3:2007, EN 166:2011

Part number Lens Type Package Quantity

435-4061 Smoke 10

Cat Safety Glasses - Guard

Warranty: Manufacturer’s one year
• Ultra-lightweight metal frames with spring hinges
• Rubber nose pad and temple tips
• 180-degree high wrap around style lens
• 100% optical lens clarity
• Anti-scratch/anti-fog coating
• Weight – 1.37 oz (39g)
• Retail Box and Packaging
• Cat branded
ANSI Z87.1:2010, AS/NZS 1337:1, CE marked, CSA Z94.3 :2007, EN 166:2011

Part Number Lens Type Package Quantity

460-3236 Clear 10
460-3237 Smoke 10

340
 Personal Protective Equipment — Eye Protection
Cat Safety Glasses - Torque
Warranty: Manufacturer’s one year
• Foam-lined safety glasses for dust proof fit
• Light and durable nylon chassis with indirect ventilation
• Detachable temples for use with the included strap
• 180-degree high wrap around style lens
• Crystal clear polycarbonate lenses
• Anti-scratch/anti-fog coating
• Weight – 1.79 oz (49g)
• Retail Box and Packaging
• Cat branded
ANSI Z87.1:2010, AS/NZS 1337:1, CE marked, CSA Z94.3.2007, EN 166:2011

Part Number Lens Type Package Quantity

460-3238 Clear 10
461-2616 Smoke 10

Wraparound Safety Glasses

Warranty: Cat Standard Warranty, 6 Months
• Visitor disposable safety glasses
• Can be worn over prescription glasses
• 99.9% UVA and UVB protection
• Meets or exceeds all ANSI, CSA, and CE specifications

Part Number Description Package Quantity

239-1085 Wraparound Safety Glasses 1

Safety Glasses
Warranty: Cat Standard Warranty, 6 Months
• 5-position ratchet and 4-position telescoping temples
• Soft non-slip rubber nosepiece
• Anti-scratch hard-coated lenses
• 99.9% UVA and UVB protection
• Ventilation between lens and frame
• Meets or exceeds all ANSI and CUL specifications

Package
Part Number Lens Type Quantity
249-7265 Clear (packaged for industrial; 12 per package) 1

341
Personal Protective Equipment — Eye Protection
Safety Glasses
Warranty: Cat Standard Warranty, 6 Months
• 9.75 base lens provide excellent optics and protection
• Gel nosepiece allows for all day comfort
• 4 - position telescoping temples for superior fit
• All lens are hard coated for scratch resistance
• Meets ANSI Z87.1 + standards and protects against 99% harmful UV rays

Part Number Lens Tint Package Quantity

Industrial Packaging
307-3013 Clear 12 per package
307-3014 Smoke 12 per package
307-3015 Indoor/Outdoor Use 12 per package

Safety Glasses
Warranty: Cat Standard Warranty, 6 Months
• Polarized lens provides superior glare control
• 5 position ratchet plus 4-position telescoping temples for superior fit
• Ventilation channel between lens and frame helps reduce fogging
• Meets ANSI Z87.1 + standards and protects against 99% harmful UV rays

Part Number Package Quantity Lens Type

Industrial Packaging
309-4932 12 per package Polarized

Safety Glasses
Warranty: Cat Standard Warranty, 6 Months
• Rubber tipped temples for comfortable fit
• Soft rubber nosepiece
• Tough polycarbonate lens provides superior protection
• Meets ANSI Z87.1 + and CUL standards and protects against 99% harmful UV
rays

Part Number Package Quantity Lens Tint

Industrial Packaging
307-3017 12 per package Clear
307-3018 12 per package Smoke
307-3019 12 per package Indoor/Outdoor Use

342
 Personal Protective Equipment — Eye Protection
Safety Glasses
Warranty: Cat Standard Warranty, 6 Months
• Sleek, sporty style frame
• Soft, rubber temples provide superior comfort
• Rubber nosepiece allows for all day comfort
• Comes standard with neck cord
• Meets ANSI Z87.1 + standards and protects against 99% harmful UV rays

Part Number Package Quantity Lens Tint

Retail Packaging (Clamshell)
308-6384 Clamshell Clear

Safety Glasses
Warranty: Cat Standard Warranty, 6 Months
Bi Focal Safety Glass
• Magnification diopter molded into lens
• Soft, rubber nosepiece
• Cushioned, non-slip rubber temple pads
• Meets ANSI Z87.1 + standards and protects against 99% harmful UV rays

Part Number Package Quantity Lens Type

Industrial Packaging
308-6391 12 Per Package Clear 1.0
308-6393 12 Per Package Clear 1.5
309-2454 12 Per Package Clear 2.0
309-2456 12 Per Package Clear 2.5
309-2458 12 Per Package Clear 3.0
Retail Packaging (Clamshell)
309-2455 Clamshell Clear 2.0

Safety Glasses
Warranty: Cat Standard Warranty, 6 Months
• Sleek, sporty, lightweight wraparound frame
• Gel nosepiece allows for all day comfort
• High gloss painted frame
• Comes standard with neck cord
• Cushioned, non-slip rubber temple pads
• Meets ANSI Z87.1 + standards and protects against 99% harmful UV rays

343
Personal Protective Equipment — Eye Protection
Safety Glasses (Cont'd.)
Part Number Package Quantity Lens Tint
Industrial Packaging
307-3025 12 Per Package Smoke

344
 Personal Protective Equipment — Eye Protection
Safety Goggles
Warranty: Cat Standard Warranty, 6 Months
• Provides excellent ventilation and indirect protection
• Fits over most prescription eyewear
• Clear optical-grade polycarbonate lens
• Adjustable headband
• Meets or exceeds all ANSI specifications

Part Number Description Package Quantity

233-8584 Safety Goggles 1 Pair

Safety Goggles
Warranty: Cat Standard Warranty, 6 Months
• Perforated goggle with excellent ventilation and protection
• Fits over most prescription eyewear
• Clear optical-grade polycarbonate lens
• Adjustable headband
• CE Marked, ANSI 287.1, CUL, EN166

Part Number Description Package Quantity

233-8583 Vented Safety Goggles 1 Pair

Lanyard for Safety Glasses

Warranty: Caterpillar Standard Warranty, 6 Months
Universal lanyard to help you keep track of your safety glasses when moving into
and out of the shop.
• Rubber tips slip right onto your safety glasses
• Cat branded slider adjusts to help keep your glasses snug

Part Number Description

435-4062 Cat Lanyard

345
Personal Protective Equipment — Eye Protection
All-purpose Wipers
Warranty: Cat Standard Warranty, 6 Months
• Cleaning tissues for safety glasses
• Pop-up style box

Part Number Description Qty. Size

263-0867 All-purpose Wipers 300 tissues per box, 60 boxes per case 127 mm x 203 mm (5 in x 8 in) wipers

Lens Cleaning Towelettes

Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Excellent disposable moisturized towels for lens cleaning
• Can be used on plastic, glass and polycarbonate lenses, face shields, and
goggles
• Towelettes are pre-moistened with anti-fog, anti-static formula
• Individually foil wrapped towelettes are great for service trucks and tool boxes
• Dispenser features pull out bottom for easy dispensing and built in tab for
hanging
• Each dispenser contains (100) 127 mm x 203 mm (5 in x 8 in) towelettes

Part Number Description

239-1086 Lens Cleaning Towelettes (Individually Wrapped with Dispenser Box)

Lens Cleaning Station

European Union Compliant, CE marked
• May be used on safety glasses, face shields, goggles, and full face respirators
• Economical lens cleaning station provides lens cleaning needs in shop or office
• Promotes proper lens cleaning, extending life of safety glasses
• Specially formulated solution cleans greasy and oily glasses while providing an
anti-fog/anti-static coating
• Low lint non-abrasive tissues leave lenses clear and streak free
• Easily mounted on wall or table top
• Each station contains 8 oz. anti-fog/anti-static solution and 600 low lint, non-abra-
sive tissues

Part Number Description

239-1087 Lens cleaning station

346
 Personal Protective Equipment — Eye Protection
Heavy-Duty Headgear
Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Headgear has precision ratchet head size adjustment for a comfortable snug fit
• Floating window suspension distributes weight and reduces shock of impact
• Five position pinlock crown band provides additional adjustment for proper sup-
port and a firm fit
• Crown protector made of a new high-performance thermoplastic offers excellent
impact resistance over a wide range of temperatures
• Soft vinyl headband to cushion the forehead
• Packaged individually. Headgear and windows must be ordered separately.

4C-8096 and 4C-8097 Features

• 229 mm x 368 mm x 2.0 mm (9 in x 14 1/2 in x 0.080 in) thickness
• Polycarbonate for heavy-duty impact protection against flying particles
• Good heat resistance
• Provide excellent general face and eye protection
• Windows can be replaced in seconds
• Windows mount inside crown protector for greater splash protection
• Spring loaded pivot assemblies maintain proper friction and prevent annoying
window drop
• Blue color and matte finish resist smudges and show less daily grime
• Packaged in quantities of 10

Part Number Description

4C-8095 Heavy Duty Headgear
Accessories for 4C-8095
4C-8096 Window - Clear Polycarbonate
4C-8097 Window - Dark Green for Glare Reduction

Face Shield
Warranty: Cat Standard Warranty, 6 Months
• Clear 203 mm x 305 mm x 1 mm (8 in x 12 in x .040 in) window
• Comfortable and durable
• Provide excellent general face and eye protection

Part Number Description

1U-8095 Face Shield
Replacement Windows for 1U-8095 Face Shield (Also fit Glendale 5000, Huntsman
K, K3, K4 and K10, Norton 6300 and Jackson J-10 face shields)
1U-8096 Clear replacement window
4C-4404 Green replacement window

347
Personal Protective Equipment — Hearing Protection
Disposable Ear Plugs
Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Tapered disposable plug for excellent fit
• Light comfortable foam
• Smooth surface to repel dirt
• Excellent protection at NRR29

Part Number Package Quantity

239-1090 1

Reusable Uncorded Ear Plugs

Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Super-soft washable reusable plugs
• Flip-top case included
• Non-toxic FDA-approved material
• Excellent protection at NRR28

Part Number Package Quantity

239-1089 1

Disposable Foam Ear Plugs

Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Bell-shaped polyurethane foam for maximum comfort
• Smooth soil-resistant skin
• Noise reduction rating: 33dB
• NRR33, Canada Class A(L), SNR 37, SLL{80}26, Class 5, CA 14.114, EN352
• Color: neon

Part Number Description Qty.

260-4783 Uncorded Disposable Plugs 10 pc
260-4785 Corded Disposable Plugs 25 pc

348
 Personal Protective Equipment — Hearing Protection
Band Ear Plugs
Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• High-density construction, lightweight and durable
• Non-toxic FDA approved material earplugs
• Comfortable and cool on hot days
• Noise reduction rating: 23 dB
• Engineered angled earplug for maximum sound protection and comfort

Part Number Description

233-8585 Rad Band
233-8586 Replacement Plugs

Silencer Ear Muffs

Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Comfortable adjustable padded headband
• Soft foam padded ear cups—comfortable when wearing with glasses
• Rugged and lightweight
• Dielectric
• Excellent protection at NRR26

Part Number Description

233-8587 Silencer Ear Muffs

Multipositional Ear Muff

Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Adjustable steel headband
• Foam filled ear cushions with a soft breathable surface
• NRR at various positions:
– NRR26 over-the-head
– NRR26 behind-the-head
– NRR23 under-the-chin

Part Number Description Package Quantity

239-1088 Multipurpose Ear Muff 1

349
Personal Protective Equipment — Hearing Protection
Ear Muffs
Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Hard hat-mounted ear muffs feature large, lightweight ear cups that attach to a
variety of hard hats for convenience
• Recommended for moderately high noise situations (up to 95 dBA TWA)
• Noise reduction rating: 23 dB

Part Number Description Package Quantity

4C-6581 Ear Muffs 2 pair

350
 Personal Protective Equipment — Hard Hats
Hard Hats
Warranty: Caterpillar Standard Warranty, 6 Months
• High-density polyethylene
• Self-sizing, four-point suspension with brow pad
• Rain trough brim provides extra protection against snow, rain, dust, and dirt
• Attachment points for accessories like: earmuffs, face shields, flashlights, etc.
• Meets or exceeds ANSI/ISEA Z89.1-2009, Type 1, Class E and G, CSA Z94.1-2005,
Type 1, Class E and G, EN 397

Hard Hats
Yellow 437-1415
White 437-1416

Hard Hat Winter Liner

Warranty: Cat Standard Warranty, 6 Months
European Union Compliant, CE marked
• Wear with 239-4964, 239-4965, 239-4966, and 239-4967 Hard Hats
• Dark blue cotton twill with fleece lining
• Comes with a hook and loop chin strap fastener
• Will work with other similar hard hats

Part Number Description

1U-8091 Hard Hat Winter Liner

351
Personal Protective Equipment — Breathing Protection
Particulate Respirator
Warranty: Cat Standard Warranty, 6 Months
• Replaces 4C-8761 Dust/Mist Respirator
• 193-0766 and 193-0071 meet NOISH 42 CFR 84 N95 requirements. TC-84A2668 and
TC-84A2669
• Three-panel respirator with innovative design allows better visibility and con-
forms to a wide range of face sizes
• Soft cover web on inner panel is comfortable against face and helps provide a
custom fit and secure seal
• Individually packaged to help prevent contamination
• 193-0071 features the Cool Flow™ exhalation valve for easy exhalation and cool
dry comfort
• Suggested applications: grinding, sanding, sweeping, bagging, general mainte-
nance, dusty operations and operations involving liquid or non-oil based particle
from sprays that do not emit harmful vapors

Part Number Description Qty.

193-0071 Particulate Respirator 10 respirators per box
193-0766 Particulate Respirator 20 respirators per box

Welding Respirator
Warranty: Cat Standard Warranty, 6 Months
• Meets NOISH 42 CFR 84 N95 requirements. TC-84A0454
• Cool flow exhalation valve promotes worker comfort by offering easy exhalation for
cooler, dry comfort
• Contours easily to provide a comfortable, good seal
• Economical all-filter design with no spare parts to clean
• Suggested applications: welding, brazing, soldering, torch cutting, metal pouring,
grinding, sanding, sweeping, bagging, general maintenance and operations involv-
ing liquid or non-oil based particle from sprays that do not emit harmful vapors

Part Number Description Qty.

237-5181 Welding Respirator 10 respirators per box

352
 Personal Protective Equipment — Breathing Protection
Dust Mask
Warranty: Cat Standard Warranty, 6 Months
• Adjustable metal nose bridge, single strap, and contour-fit design to ensure best
coverage
• Lightweight and disposable
• Non-irritating to the skin
• Not NIOSH approved
• Material: polyester

Part Number Description Qty.

262-4866 Reusable Polyester Dust Mask 50 respirators per box

353
Personal Protective Equipment — First Aid Kits
Personal First Aid Kit - 150-1578
Warranty: Cat Standard Warranty, 6 Months
• Small, portable kit for service trucks, tool boxes, or for personal use in family
home, car, camper, or boat
• Soft shell case made of water resistant nylon
• Uses “Book Style” construction with zippered internal compartments (makes it
easy to access items)

150-1578 consists of:

Description Size Quantity
Water resistant nylon container 190.5 x 38.1 x 107.95 mm (7.5 x 1.5 x 4.25 in) 1
Scissors 102 mm (4.0 in) 1
Tweezers 76.2 mm (3 in) 1
First aid booklet 1
Bandaids 19.05 x 76.2 mm (.75 x 3 in) 20
Alcohol swabs 6
Wet wipes 4
Antiseptic swabs 12
Adhesive tape 2.3 m x 12.7 mm (2.5 yd x .5 in) 1
Sterile gauze pads 50.8 x 50.8 mm (2 x 2 in) 4
Sterile gauze pads 101.6 x 101.6 mm (4 x 4 in) 2
Sterile abdominal pad 127 x 228.6 mm (5 x 9 in) 1
Sterile pressure bandage 50.8 mm (2 in) 1
Conform gauze roll 4.57 m x 50.8 mm (5 yd x 2 in) 1
Triangular bandage 1
Safety pins 6
Vinyl gloves 1 pair
Acetaminophen 1 (2 per pack)

Part Number Description

150-1578 Personal First Aid Kit

354
 Personal Protective Equipment — First Aid Kits
Portable First Aid Kit - 150-1579
Warranty: Cat Standard Warranty, 6 Months
• Small, portable kit for service trucks, tool boxes, or for personal use in family
home, car, camper, or boat
• Soft shell case made of water resistant nylon
• Uses "Book Style" construction with zippered internal compartments (makes it
easy to access items)

150-1579 Consists of:

Description Size Quantity
Water resistant nylon container 228.6 x 76.2 x 127 mm (9 x 3 x 5 in) 1
Scissors 152.4 mm (6 in) 1
Stainless steel splinter forceps 114 mm (4.5 in) 1
First aid booklet 1
Cloth bandaids 22.2 x 76.2 mm (.87 x 3 in) 10
Finger tip bandaids 5
Knuckle bandaids 5
Alcohol swabs 24
Wet wipes 6
Antiseptic swabs 16
Adhesive tape 4.6 m x 25.4 mm (5 yd x 1 in) 1
Sterile gauze pads 50.8 x 50.8 mm ( 2 x 2 in) 8
Sterile gauze pads 101.6 x 101.6 mm (4 x 4 in) 2
Sterile abdominal pad 127 x 228.6 mm (5 x 9 in) 2
Sterile pressure bandage 101.6 mm (4 in) 1
Conform gauze roll 4.57 m x 50.8 mm (5 yd x 2 in) 2
Triangular bandage 1
Safety pins 6
Vinyl gloves 1 pair
Multi-purpose pad 431.8 x 609.6 mm (17 x 24 in) 1
Tensor bandage 50.8 mm (2 in) 1
Instant cold pack (in box) 1016 x 152.4 mm (4 x 6 in) 1
Emergency mylar blanket 1

Part Number Description

150-1579 Portable First Aid Kit

355
Personal Protective Equipment — First Aid Kits
Worksite First Aid Kits, 25 and 50-person
Warranty: Cat Standard Warranty, 6 Months
• Kits for your safety and first aid requirements
• Comply with OSHA 1910.151 for industry, and OSHA 1926.50 for construction
• 163-0798 contains supplies for 25 people; 163-0799 contains supplies for 50 people
• Soft shell case

Contents 163-0798 25-person 163-0799 50-person

Adhesive Strips, 3/4 in x 3 in 50 100
Adhesive Tape Roll, 1/2 in x 5 yd 1 1
Alcohol Wipes 13 23
Ammonia Inhalants 3 3
Instant Cold Pack 1 1
Combine Pad, 5 in x 9 in 1 1
Sterile Cotton, 1/2 oz roll 1 1
Disposable Gloves 1 pr 2 pr
Eye Irrigate Solution, 1 oz bottle 1 1
Eye Pads, oval, 1.75 in x 2.5 in 2 4
Gauze Pads, 4 in 2 4
Gauze Pads, 3 in 4 8
First Aid Cream, 7/8 oz 1 2
Triangular Bandage 1 1
Gauze Bandage, 2 in x 5 yd 2 2
Gauze Bandage, 4 in x 5 yd — 1
Elastic Bandage, 2 in — 1
Scissors 1 1
Tweezers 1 1

Part Number Description

163-0798 Small Worksite First Aid Kit (25-Person)
163-0799 Large Worksite First Aid Kit (50-Person)

356
 Personal Protective Equipment — First Aid Kits
First Aid Kit - 389-2195
Warranty: Cat Standard Warranty, 6 Months
• Worksite first aid kit
• Metal Box
• Designed to meet DIN 13164

389-2195 consists of:

1 Certi-Tape
1 2-inch Stretch Gauze Roll
1 3-inch Stretch Gauze Roll
1 Rescue Blanket
1 Bandage Scissors
1 First Aid Fact Sheet
1 Safety Flag
3 ANSI Z308.1.2009 Triangular Bandages
4 ANSI Z308.1.2009 Nitrile Gloves
6 Certi-Gauze Pads
7 Certi-Gauze Bandage Compresses in various sizes
8 Extra Large Plastic Certi-Strips

Part Number Description

389-2195 First Aid Kit

357
Personal Protective Equipment — Welding Protection
Welding Helmet
Warranty: Cat Standard Warranty, 6 Months
• 51 mm x 108 mm (2 in x 4 1/4 in), "shade 10" lens
• Ratcheting headgear adjusts to fit any head size
• Nylon material is lightweight and durable

Part Number Description

1U-8097 Welding Helmet

Welding Helmet
Warranty: Cat Standard Warranty, 6 Months
• Features a shade 10 lens but in a larger size - 114 mm x 133 mm (4 1/2 in x 5 1/4
in)
• Has ratcheting head gear
• Made of sturdy nylon material

Part Number Lens Type Lens Use For:

1U-8100 Welding Helmet –
Replacement Lens for 1U-8097 and 1U-8100 Welding Helmets
1U-8099 Plastic Cover Plates (1) 1U-8097
1U-8101 Shade 10 Tinted Glass (2) 1U-8100
1U-8209 Shade 10 Tinted Glass (2) 1U-8097

Welding Goggles
Warranty: Cat Standard Warranty, 6 Months
• Feature a shade 5 lens, good ventilation, and a light-tight fit

Part Number Description

1U-8103 Welding Goggles° ° µ ddd

1 Two needed, one inside and one outside of your tinted glass lens
2 Shade 10 lens used for welding with manual weld electrodes

358
 Personal Protective Equipment — Welding Protection
Welding Goggles with Lift Front Lens
Warranty: Cat Standard Warranty, 6 Months
• Feature the shade 5 lens with a hinged front-lift door

Part Number Description

1U-8104 Welding Goggles with Lift Front Lens

Welding Blanket
Warranty: Cat Standard Warranty, 6 Months
• Made of a fiberglass textile material
• Light gold neoprene coating on one side to reduce fraying
• Hemmed and seamed with Kevlar thread
• Retains heat
• Protects welding area

Part Number Description Dimensions

4C-9616 Blanket 183 cm x 183 cm (6 ft x 6 ft)
4C-9617 Blanket 183 cm x 244 cm (6 ft x 8 ft)
4C-9618 Blanket 183 cm x 305 cm (6 ft x 10 ft)

359
Contamination Control
Engine Cover
Warranty: Manufacturer’s
• Protects engine from dirt and debris
• Can be used as drop cloth or dust cover
• Affordable and disposable

Part Number Size Qty.

1U-7427 122 x 183 cm (48 x 72 in) 50 sheets per case

Seat Covers
Warranty: Cat Standard Warranty, 6 Months
• These seat covers drape over the seats and are disposable when the job is
finished
• They are produced from a specially formulated resin that has a built-in stretch to
help prevent tool punctures and rips. These covers are made of a clear non-slip
surface on both sides that helps hold it in place while providing safe usage.

Part Number Description

274-7454 Roll of 250 seat covers
274-7455 Case of 250 seat covers

Wall Mount Dispenser

Warranty: Cat Standard Warranty, 6 Months
• Space saver wall dispenser mounts with ease to accommodate seat cover rolls
• This dispenser will help keep your interior protection products clean and easy to
reach

Part Number Description

274-7458 Seat cover roll dispenser

Floor Cover
Warranty: Cat Standard Warranty, 6 Months
• Interior service soils are the single most frequent complaint by service custom-
ers. Help keep the inside clean with these floor covers that stay in place. These
covers have a high absorption paper on top and a plastic bottom that won't soak
through

Part Number Description

274-7456 Case of 500 floor covers

360
 Contamination Control
Cabinet Cover - 449-8227
Warranty: Manufacturer’s
• Durable PVC material that protects dirt, dust, wind and rain
• Drawstring cinches tight for a snug fit that won’t blow away
• Dimensions are 187.96 x 213.36 x 137.16 cm (74 x 84 x 54 in)
• 793F AC requires waterproof cover for resister grid and inverter cabinet during service

AC Resister Grid and Inverter Cabinet Cover (Yellow)

Use Size Part Number
Cabinet cover for 793F AC 187.96 x 213.36 x 137.16 cm (74 x 84 x 54 in) 449–8227

Steering Wheel Covers

Warranty: Cat Standard Warranty, 6 Months
• The see-thru steering wheel cover protects your customer's steering wheel from
oily prints. It is elasticized on both sides providing protection for the wheel and
the customer's hands. Impervious to grease, these afford maximum protection for
the wheel.

Part Number Description

274-7457 Case of 500 covers

Dust Cap for 55 Gallon Drum

Warranty: Cat Standard Warranty, 6 Months
• Excellent for covering open drum containers
• Ideal for most industrial, food, chemical, and pharmaceutical applications
• Low cost protection from dirt, dust, and moisture
• Prevents contamination and evaporation
• Elastic around entire opening helps keep cover in place
• Provides easy access to contents
• Fits a 208.2 L (55 gal) drum

Part Number Size Qty.

270-5347 863.6 mm (34 in) diameter 100 per box

361
Contamination Control
Barrel Cover
Warranty: Cat Standard Warranty, 6 Months
• Used to cover open or closed top drums — cover snaps onto top of drum
• Supports the Caterpillar contamination control efforts
• Protects drum contents from water induction when stored outside
• Keeps drum top clean and contents ready for use
• Made of long lasting, low density polyethylene — resistant to petroleum-based
fluids and ultraviolet rays
• 10 covers per package

Part Number Material Thickness I.D. Color

1U-6156 1.5 mm (0.06 in) 571 mm (22.48 in) Yellow

Zipper-Top, Clear Bags for Contamination Control

Warranty: Cat Standard Warranty, 6 Months
• Exceptional strength
• Plastic slider top for easy opening and closing
• Material: linear low density polyethylene (LLDPE)

Part Number Size Thickness Qty.

270-5341 203 x 178 mm (8 x 7 in) 3.0 mm 250 bags/carton
270-5342 229 x 305 mm (9 x 12 in) 3.0 mm 250 bags/carton

362
 Fluid Sampling Equipment
Fluid Sampling Extraction Tools for Pressurized Compartments
Warranty: Cat Standard Warranty, 6 Months

• Valve locations provide oil sample confidence and continuity—comparative data of pressurized oil samples is
more reliable because the sample is taken from a continuous flow of oil at a known location.
• A probe is provided that allows the valve to be quickly flushed prior to taking the oil sample
• The sample bottle group is packaged, and sealed in a plastic bag to insure cleanliness
• Pressurized oil sampling is a fast, economical and clean method of obtaining oil samples from pressurized
systems
• Better represents oil condition because the oil is continually mixed and circulated
• 10 to 20 times faster than sampling oil from non-pressurized systems
• Mailing container is available so the oil sample can be conveniently mailed to the testing laboratory

This bottle group is sealed in a plastic bag with sampling instructions included. The bottle group is ready to use
when it is removed from the bag after the valve has been purged and the sample is ready to be taken. The bottle
included in this group (169-7372) has the capacity to provide a 114 g (4 oz) sample. The 169-7372 can also be or-
dered by itself, 200 per case.
After the sample is obtained, the probe and tube are removed from the bottle cap and holder, and discarded, and
the cap-cover seals the bottle. Labels for identifying the sample (obtained locally) can then be attached to send
the oil for identification purposes. The 4C-4600 mail tube is available to send the oil sample to the laboratory. The
laboratory also provides a mailing label.

169-8373 Bottle Group (Package Qty. - 300)

177-9343 Probe and Cap Group (package Qty. - 500)
The probe and cap group provides the same probe and cap that are used in the 169-8373 Bottle Group, however,
without the bottle. This group is also sealed in a plastic bag with sampling instructions included. This group allows
the dealer the flexibility to use other bottles such as the smaller 71 g (21/2 oz) 169-7373 bottle assembly (which
must be ordered separately). (The cap requires that the bottles have a 38 M thread).

169-7373 Bottle Assembly (Package Qty. - 200)

This smaller bottle assembly (169-7373) can be used with the 177-9343 Probe and Cap Group and reduces mailing
expense by approximately one-half for dealers whose oil sample labs can provide effective full service analysis
with 71 g (21/2 oz) or less of oil. These bottles can be used for engine samples since particle count is not used for
engine samples. This bottle can also be used with the 1U-5718 Vacuum Pump used for non-pressurized oil
sampling.

8T-9208 Probe Assembly (package Qty. - 1)

The 8T-9208 Probe Assembly can be attached to a 6.35 mm (1/4 in) I.D. rubber hose (6K-0713 Hose - 228.6 mm (9 in)
long or any desired length cut from bulk 5P-6442 hose or equivalent 100R6 type high temperature - low pressure
hose).The 8T-9208 Probe and hose connected to a locally obtained waste container provide a method to purge or
flush the 8C-3446, 8C-3345, or 7X-3387 sample values prior to obtaining the desired oil sample using either the 169-
7373 Bottle Group or 177-9343 Probe and Cap Group with the desired bottle. Approximately 14.8 cm to 29.6 cm (1/2
to 1 ounce) of expelled fluid purges the valves.
Pressurized systems on many Cat products are equipped with sampling values to quickly extract oil samples with
the above tools. Special Instruction SEHS9043 details retrofitting some earlier models with oil sampling valves, as
well as pointing out the respective valve locations on models currently factory equipped with the oil sample
valves.

363
Fluid Sampling Equipment
Fluid Sampling Extraction Tools for Pressurized Compartments (Cont'd.)
321-0659 8oz (240ml) Bottle and Cap (package Qty. - 1)
The 321-0659 Bottle and Cap can be used with the 293-8413 Hydac Contamination Monitor and the 202-2301 Port-
able Contamination Instrumental Kit.

Item Part Number Description Package Quantity

1 169-8373 Bottle Group, 300 per box 300 per box
2 162-8873 Probe, Holder –
3 177-9343 Probe and Cap Group, 500 per box 500 per box
4 4C-4600 Mailer Container — reusable Tube — 30.5 m (100 ft) rolls –
5 1U-8757 6.35 mm OD x 30.5 m rolls (1/4 in OD x 100 ft) 5 rolls per box 5 rolls per box
6 4C-4056 7.9 mm OD x 30.5 m rolls (5/16 in OD x 100 ft) 5 rolls per box, not pictured 5 rolls per box
7 169-7373 Clear Bottle, 71 g (2.5 oz), 200 per box 200 per box
8 169-7372 Clear Bottle, 114 g (4 oz), 200 per box 200 per box
9 1U-5718 Vacuum Pump –
10 8T-9208 Purging Probe(1) –
11 6V-0852 Dust Cap (Blank) (not pictured)
11 1U-7648 Tube Cutter –
12 3J-7354 Seal - O-ring - STOR for 8C-3446 (not pictured)
– 1U-5719 Seal Kit for 1U-5718 Pump (not pictured) –
– 7X-3387 S·O·S Sampling Valve
– 8C-3345 Oil Sampling Valve (M10 x 1 — ext thd)
– 8C-3445 Dust Cap (Engine)
– 8C-3446 Oil Sampling Valve (7/16 in-20 — ext. thd)
– 8C-3447 Dust Cap (Transmission) (not pictured)
– 8C-3451 Dust Cap (not pictured)
– 8C-8456 Sealed Cap
– 8T-7876 O-ring Seal for 8C-3345 (not pictured)
Not shown
– 321-0659 Bottle and Cap (8oz/240ml) 1
– 4C-4055 6.35 mm OD x 2.1 m (1/4 in OD x 7 ft), 250 pieces per box 250 per box
– 4C-4057 7.9 mm OD x 2.1 m (5/16 in OD x 7 ft), 240 pieces per box 250 per box
Oil Sampling Valves and O-Ring Seals
12 3J-7354 Seal - O-ring - STOR for 8C-3446 (not pictured)
– 7X-3387 S·O·S Sampling Valve
– 8C-3345 Oil Sampling Valve (M10 x 1 — ext thd)
– 8C-3446 Oil Sampling Valve (7/16 in-20 — ext. thd)

1 Warranty: Manufacturer’s, 30-Day

364
 Fluid Sampling Equipment
Fluid Sampling Extraction Tools for Pressurized Compartments (Cont'd.)
Item Part Number Description Package Quantity
– 8T-7876 O-ring Seal for 8C-3345 (not pictured)
Protective Dust Caps for Oil Sampling Valves (These are rubber caps with embossed symbols to indicate system being sampled.)
11 6V-0852 Dust Cap (Blank) (not pictured)
– 8C-3445 Dust Cap (Engine)
– 8C-3447 Dust Cap (Transmission) (not pictured)
– 8C-3451 Dust Cap (not pictured)
– 8C-8456 Sealed Cap
Miscellaneous fittings and adapters commonly used for oil sampling valve retrofit installations
2 3J-5390 Plug - NPTF (Ext Hex) 3/8 in-18 NPTF external to 1/8 in-27 NPTF internal –
3 3B-7722 Bushing-Pipe-Reducing 3/8 in-18 NPTF to 1/4 in-18 NPTF –
4 2S-4078 O-ring Seal for 9T-6865 Adapter Plug
4 7M-8489 Adapter Assembly, 90° elbow 9/16 in-18 SAE external to 1/4 in-18 internal
13 6V-3966 Pressure Test Valve, 1/4 in-18 NPTF external
(not 7J-8611 Elbow-90°-Pipe 1/4 in-18 NPTF –
shown)
– 3J-1907 O-ring Seal for 5P-9617 Adapter
– 3L-6521 Adapter Tee, 1/4 in-18 NPT (2 internal and 1 external) –
– 5P-3413 Pipe Sealant, 47.25 g (1 2/3 oz) tube –
– 5P-3501 Adapter, 9/16 in-18 SAE external to 1/4 in-18 NPTF internal –
– 5P-9617 Adapter Reducer, 9/16 in-18 SAE external to 7/16 in-20 SAE internal –
– 6V-7529 Adapter, 1/8 in-27 NPTF external to 7/16 in-20 SAE internal –
– 8C-6427 Adapter, 1/4 in-18 NPTF external to 7/16 in-20 SAE internal –
– 9T-6865 Adapter Plug, 5/8 in-12 SAE external to 7/16 in-20 SAE internal –

Fluid Sampling Extraction Tools for Non-Pressurized Compartments

Warranty: Cat Standard Warranty, 6 Months
Fluid sampling extraction tools are used to obtain fluid samples from non-pressurized vehicle compartments such
as final drives, differential compartments, transfer cases, axle housings, etc.

The 1U-5718 Vacuum Pump is capable of pulling 25 inch (7.62 mm) Mercury (vacuum). The pump is compact and
accepts the 169-7372, 114 g (4 oz), and 169-7373 Bottle Assembly, 71 g (2 1/2 oz), bottles, or any 38 M threaded plas-
tic bottle, and 6.35 mm (1/4 inch) O.D. and/or 7.9 mm (5/16 inch) O.D. plastic tube.

The 1U-5719 Kit provides replacement seals for the vacuum pump.

The 169-7372 bottle has 4 oz (114 g) capacity. The bottle is marked showing fluid full range at 3/4 capacity. The fill
range provides a reminder to not overfill the bottle. Partially filling the bottle satisfies both mailing and lag require-
ments. Full bottles expand because of temperature changes and can possibly rupture within the mailing container.
The partially filled bottle also allows the lab to shake the fluid sample prior to extracting fluid for testing. Labels
identifying the fluid are obtained locally. The label is processed locally and attached to the sample bottle.

The 169-7373 bottle is the same as the 169-7372 bottle except the capacity is 71 g (21/2 oz) rather than 114 g (4 oz).
Both are clear high performance plastic rated at 91° C (195° F).

365
Fluid Sampling Equipment
Fluid Sampling Extraction Tools for Non-Pressurized Compartments (Cont'd.)
1U-8757 Tubing consists of five 30.5 m (100 ft) rolls of 6.35 mm (1/4 inch) O.D. plastic tubing. Random lengths of tub-
ing can be easily dispensed from the tubing package. This tubing permits extraction of heavier oils when using the
vacuum pump.
Both tubing sizes are also available in pre-cut 2.1 m (7 ft) lengths that are packaged 250 pieces per box. This elimi-
nates cutting the tube for each sample.

The 4C-4055 Tubing contains 250 pieces of 6.35 mm (1/4 inch) O.D. tubing each 2.1 m (7 ft) long.

The 1U-7648 tube cutter is a convenient tool that easily cuts the desirable length of either 6.35 mm (1/4 inch) or 7.9
mm (5/8 inch) plastic tubing. The cutter can cut the tubing at 90° or at a bias.

The following summarizes various sampling tools available through the Caterpillar Parts Distribution System:

Part Number Description Part Number Description

169-7372 Clear Bottle, 114 g (4 oz), 200 per box 4C-4057 7.9 mm OD x 2.1 m (5/16 in OD x 7 ft),
169-7373 Clear Bottle, 71 g (2.5 oz), 200 per box 240 pieces per box
169-8373 Bottle Group, 300 per box 4C-4600 Mailer Container — reusable Tube —
30.5 m (100 ft) rolls
177-9343 Probe and Cap Group, 500 per box
6V-0852 Dust Cap (Blank) (not pictured)
1U-5718 Vacuum Pump
7X-3387 S·O·S Sampling Valve
1U-5719 Seal Kit for 1U-5718 Pump (not pictured)
8C-3345 Oil Sampling Valve (M10 x 1 — ext thd)
1U-7648 Tube Cutter
8C-3445 Dust Cap (Engine)
1U-8757 6.35 mm OD x 30.5 m rolls (1/4 in OD x 100 ft)
5 rolls per box 8C-3446 Oil Sampling Valve (7/16 in-20 — ext. thd)
3J-7354 Seal - O-ring - STOR for 8C-3446 (not pictured) 8C-3447 Dust Cap (Transmission) (not pictured)
4C-4055 6.35 mm OD x 2.1 m (1/4 in OD x 7 ft), 8C-3451 Dust Cap (not pictured)
250 pieces per box 8C-8456 Sealed Cap
4C-4056 7.9 mm OD x 30.5 m rolls (5/16 in OD x 100 ft) 8T-7876 O-ring Seal for 8C-3345 (not pictured)
5 rolls per box, not pictured
8T-9208 Purging Probe (2)

Oil Safe Containers

Warranty: Six months
• Prevents oil contamination
• Speeds up lubrication jobs
• Dispenses easily to awkward points
• Reduces spills and resulting accidents
• Expedites filling and refilling
• Leads to an organized workspace
• Pump fits 10L drum when coupled with a Utility Lid

2 Warranty: Manufacturer’s, 30-Day

366
 Fluid Sampling Equipment
Oil Safe Containers (Cont'd.)
Part Number Description Part Number Description
310-5744 Contamination Prevention Kit 310-5715 Stumpy Spout Lid (Yellow)
310-5744 Consists of: – Stretch Spout Lid (Blue)
– Drum (3 l) – Utility Lid (Red)
310-5678 Drum (5 l) Accessories
– Drum (10 l) 310-5713 Stumpy Spout Lid (Red)
– Pump 310-5716 Stumpy Spout Lid (Lt. Green)
– Stretch Hose Extension

367
Towels and Wipers
DRC Quarter-Fold Wipers
Warranty: Cat Standard Warranty, 6 Months
• Highly absorbent material—cleans up oil, grease, water, and other messy fluids
• Strong and abrasion-resistant—resists tearing even when wet
• Offers a low-lint alternative
• Economical alternative to shop rags or towels
• Soft cloth-like feel

Part Number Size Color Qty.

288-4209 31.75 x 33.02 cm (12.5 x 13 in) White 56 wipers per bundle, 18 bundles per case

DRC Pop-Up Shop Towels

Warranty: Cat Standard Warranty, 6 Months
• Highly absorbent material—cleans up oil, grease, water, and other messy fluids
• Soft cloth-like feel
• Strong and abrasion-resistant—resists tearing even when wet
• Offers a low-lint alternative in a handy pop-up container

Part Number Size Color Qty.

288-4210 24.13 x 41.91 cm (9.5 x 16.5 in) White 100 towels per box, 9 boxes per case
288-4211 24.13 x 41.91 cm (9.5 x 16.5 in) Blue 100 towels per box, 9 boxes per case

DRC Center-Pull Roll Dry Shop Towels

Warranty: Cat Standard Warranty, 6 Months
• Highly absorbent material—ideal for use on grease, oils, and other messy fluids
• Strong and abrasion-resistant—resists tearing even when wet
• Center-pull wiper wrapped in clear plastic film with re-closeable top tab for easy
dispensing

Part Number Size Color Qty.

288-4212 22.86 x 33.02 cm (9.0 x 13.0 in) White 300 towels per roll, 1 roll per pack

368
 Towels and Wipers
DRC Center - Pull Shop Towels
Warranty: Cat Standard Warranty, 6 Months
• Economical alternative to shop cloths, without the mess
• Works like cloth but at a faction of the cost
• Packaging keeps your shop towels clean and dry until needed
• Won't color bleed and no thread gaps
• Made with the strongest and heaviest DRC material on the market
• New center pull design allows for one towel to come out at a time
• Center-pull design holds until the last three towels
• Absorbs fluids on contact and lint free

Part Number Description Size Qty.

303-9339 DRC Red Shop Towels 30.7 x 42.7 cm (12.1 x 16.8 in) 140 per roll

DRC Jumbo Roll Shop Towels

Warranty: Cat Standard Warranty, 6 Months
• Highly absorbent material—cleans up oil, grease, water, and other messy fluids
• Soft cloth-like feel
• Strong and abrasion-resistant—resists tearing even when wet

Part Number Description Size Color Qty.

301-9696 DRC Jumbo Roll Shop Towels 31.75 x 33.02 cm White 692 towels per roll, 1 roll
(12.5 x 13 in) per case
311-3136 Holder for 301-9696 – – 5

All-Purpose Wipers
Warranty: Manufacturer’s
• Highly absorbent—cleans up oil, grease, water and other messy fluids
• Strong and abrasion resistant—great wet-strength for scrubbing
• Pliable for reaching into tight places
• Soft for personal cleaning
• Low lint and won't leave a residue
• Economical alternative to shop rags or towels

Part Number Size Color Qty.

265-2255 30.5 x 33 cm (12 x 13 in) quarter-folded Blue 56 wipers per pack, 18 packs per case

369
Towels and Wipers
Wipers
Warranty: Cat Standard Warranty, 6 Months
• Designed to outperform rags with Hydroknit technology in lightweight wiper
• Reinforced for extra scrubbing and cleaning power
• Leaves no residue
• Good on grease and oil, adhesive cleaning and cable lubricant removal
• Good for applying thinners and solvents

Part Number Size Color Qty.

254-3422 23.1 x 42.7 cm (9.1 x 16.8 in) White 126 wipers per box, 10 boxes per case

Low Lint Task Wipers

Warranty: Cat Standard Warranty, 6 Months
• For lab environments where clean rooms require low lint
• Excellent for surface wiping in clean manufacturing environments—fuel systems,
hydraulics, diagnostic equipment and precision instruments
• Continuous filament rayon/polyester spun-like blend for cloth-like feel
• Excellent absorption rate and capacity
• Solvent resistant
• Double wrapped in anti-stat packaging

Part Number Size Color Qty.

265-2256 20.3 x 20.3 cm (8 x 8 in) white 100 wipers per pack, 5 packs per case

Manufactured Rags
Warranty: Cat Standard Warranty, 6 Months
• HydroKnit fast-absorbing material—highly absorbent
• Cleans up oil, grime, and solvents
• Good for applying thinner and solvents
• Pound for pound absorbs more oil and water than shop rags
• Use with 1U-5432 Paper Wiper Dispenser

Part Number Size Color Qty.

267-6532 31.8 x 36.6 cm (12.5 x 14.4 in) white 76 wipers per bundle, 12 bundles per case

370
 Towels and Wipers
Manufactured Pop-up Rags
Warranty: Cat Standard Warranty, 6 Months
• HydroKnit fast-absorbing material—highly absorbent
• Reinforced for heavy maintenance cleaning and long-lasting performance that al-
so reduces waste
• Cleans up oil, grime, and solvents
• Good for applying thinner and solvents
• Pound for pound absorbs more oil and water than shop rags
• Packaged in sturdy corrugated pop-up dispenser cartons
• Can also use with 269-3368 Dispenser

Part Number Wiper Size Color Qty.

267-6535 23.1 x 42.7 cm (9.1 x 16.8 in) white 100 rags per carton, 10 cartons per case
267-6536 23.1 x 42.7 cm (9.1 x 16.8 in) blue 100 rags per carton, 10 cartons per case

Dispensers for Manufactured Rags and Paper Wipers

Warranty: Cat Standard Warranty, 6 Months
Part Number Description Usage
1U-5432 Paper Wiper Dispenser, use for 267-6532 Manufactured
Plastic Rags
269-3368 Dispenser, White Metal use for 267-6535 and 267-6536
Manufactured Rags

Hard Roll Towels

Warranty: Cat Standard Warranty, 6 Months
• Towels compressed on roll so more towels fit in same space — no sacrifice in
performance, change roll less often
• Material: paper

Part Number Description Size Color Package Quantity

263-0892 Hard Roll Towels 20.3 cm x 304.8 m (8 in x 1000 ft) roll White 12 rolls

371
Towels and Wipers
Shop Towel
Warranty: Cat Standard Warranty, 6 Months
• Excellent absorbency
• Perfect to use on grease or oil
• Low-lint, 100% polypropylene construction
• Good for cleaning and disinfecting surface
• Stands up well to spirits and solvents

Part Number Size Qty.

162-5791 30.7 x 42.7 cm (12.1 x 16.8 in) 180 per box

372
 Absorbents and Spill Kits — Absorbents
Oil Absorbent Pads
Warranty: Caterpillar Standard Warranty, Six Months
• Sonic-bonded Mats
• A lofty layer of randomly laid out melt-blow fibers enables the mat to absorb a
large amount of oil
• Mats keep shape even when saturated
• Low lint

Part Number Dimensions Absorbency Quantity

467-9234 15 in x 19 in (38 cm x 48 cm) 14 gallons (55 L) 50

Absorbent Socks
Warranty: Manufacturer’s
• Tubular absorbent socks absorb and contain leaks and spills around machinery
(hydraulic oil, coolants, non-aggressive fluids, water, and even hazardous fluids,
such as PCB oils and solvents)
• Superior diking and damming capability (hugs the floor, creating an effective bar-
rier or dike that holds back fluids, in emergency situations, even after total
absorption)
• Used primarily for everyday housekeeping around machines that leak, seep, or
spill fluids
• Fits snugly against machine bases and wrap-around corners, keeping work area
safe and dry
• Fine-grade vermiculite filler (non-biodegradable) quickly soaks up leaks and drips
• Durable, stitch-bonded polypropylene skin improves strength
• Self-contained, no messy cleanup (no loose absorbents to spread, sweep, scatter,
shovel, or track around)
• Reusable for water spills only
• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product
Reference: NELG5036

Part Quantity/ Absorption/ Absorption/ Shipping

Number Box Box Sock Size Weight
235-0844 40 113 L (30 gal) 2.8 L (.7 gal) 8 cm x 122 cm (3 in x 48 in) 23 kg (50.71 lb)
254-3969 8 57 L (15 gal) 6.8 L (1.8 gal) 75 mm (3 in) diameter x 3 m (10 ft) long 11 kg (24.25 lb)

373
Absorbents and Spill Kits — Absorbents
Absorbent Pillows
Warranty: Manufacturer’s
• Absorbent pillow soaks up small to medium-size spills of oil and other non-ag-
gressive fluids (works best once a spill has been contained)
• Fast, effective way to control leaks
• Use only as many as required (pillow's large surface area and superior wicking
ability speeds cleanup time)
• High absorption/fast-wicking cellulose fibers begin to work when pillow contacts
liquid and continue until fully saturated
• Strong, polypropylene cover will not tear when handling
• Easy cleanup (simply pick up and place into proper disposal container)
• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product
Reference
NELG5036

Part Absorption/ Absorption/ Shipping

Number Quantity/Box Box Sock Size Weight
235-0845 40 76 L (20 gal) 1.9 L (64 oz) 25 x 25 x 5 cm (10 x 10 x 2 in) 10 kg (23 lbs)

374
 Absorbents and Spill Kits — Absorbents
Heavyweight Absorbent Material for Most Oil, Water-Based Fluids and Chemicals
Warranty: Manufacturer’s
Absorbs the following fluids and chemicals:
Acetone, Acetonitrile, Aluminum Salts, Ammonium, Hydroxide, Barium Salts, Benzyl
Alcohol, Boric Acid, Butanol, Calcium Chlorite, Carbon Disulfide, Carbon Tetrachlor-
ide, Chloroform, Cupric Chloride, Cyclohexanone, Dichloromethane, Diethylamine,
Dimethylformamide, Ethyl Acetate, Formaldehyde, Gasoline, Glycol Ether, Hexane,
Hydrazine, Anhydrous, Hydrochloric Acid (37%), Hydrogen Peroxide (30%), Hydro-
fluoric Acid (48%), Isopropanol, Jet Fuel (JP-5), Kerosene, Methanol, Methyl Ethyl,
Ketone, Mineral Oil, Mineral Spirits, Naphtha, Nitric Acid (70%), Nitric Acid fuming
(90%), Nitrobenzene, Perchloroethylene, Phenol, Potassium Hydroxide 50%, Propy-
lene Glycol, Sodium Hydroxide (50%), Styrene, Sulfuric Acid (50%), Sulfuric Acid
(98%), Tetrachloroethylene, Tetrahydrofuran, Thionyl Chloride, Toluene, 1, 1, 1-Tri-
chloroethane, Trichloroethylene, Triethylamine, Turpentine, Water
• Heavyweight, gray, absorbent material designed to absorb chemicals, solvents,
oils, coolants, petroleum products, water, water-based fluids, and even acids and
bases
• Multiple uses in maintenance, repair, and operating (MRO) areas; cover areas
prone to overspray and spills, leaving a cleaner, safer work area; ideal for heavy,
concentrated machine leaks and large, spreading spills; keep floors and walk
areas safer by absorbing leaks, spills, drips, and overspray
• Dark gray color hides dirt and grime of foot traffic
• Thin profile slides into hard-to-reach areas
• Made from flame-resistant material which can be used around spark-prone
areas, such as welding or grinding equipment
• Material will not degrade or have a chemical reaction to a wide variety of chemi-
cals and strong solvents
• Absorbs 10 times its weight, reducing material purchase and disposal costs
• Dimple design helps absorb more liquid in less time (material retains liquid, even
when fully saturated)
• Roll material cuts easily with scissors or razor knife — easily shaped to fit virtu-
ally any area
• Material: 100% polypropylene
• Multiple layers are held together with thermal bond points for added strength and
durability—will not fall apart or leave behind residue, even when fully saturated
• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product unless otherwise indicated

Part Quantity/ Absorption/Box/

Number Description Box Roll Absorption/Pad Size Ply Shipping Weight
235-0847 Absorbent Roll 1 roll 155 L (41 gal) — 76 cm (30 in) wide 46 m (150 ft) long 8 14 kg (30.86 lb)
perforated to 25 cm (10 in) x 38 cm (15
in)
261-0114 Absorbent Mat 1 roll 53.06 L (14 gal) — 76.2 cm (30 in) wide 15.25 m (50 ft) 8 5 kg (11.02 lb)
long
307-9919 Absorbent Pad 100 pads 80 L (21 gal) 798 ml (27 oz) 38 x 48 cm (15 x 19 in) 3 8 kg (17.64 lb)
307-9920 Absorbent Pad 100 pads 91 L (24 gal) 917 ml (31 oz) 38 x 51 cm (15 x 20 in) 8 9 kg (19.84 lb)

375
Absorbents and Spill Kits — Absorbents
Heavyweight Absorbent Material for Most Oil, Water-Based Fluids and Chemicals
(Cont'd.)
Part Quantity/ Absorption/Box/
Number Description Box Roll Absorption/Pad Size Ply Shipping Weight
307-9922 Absorbent Pad 100 pads 80 L (21 gal) 798 ml ( 27 oz) 38 x 48 cm (15 x 19 in) 3 8 kg (17.64 lb)
307-9925 Absorbent Roll 1 roll 163 L (43 gal) – 76 cm (30 in) wide 46 m (150 ft) long 3 15 kg (33.07 lb)
perforated every 25 cm (10 in)
307-9927 Absorbent Roll 1 roll 163 L (43 gal) – 76 cm (30 in) wide 46 m (150 ft) long 3 15 kg (33.07 lb)

Rip & Fit Absorbent Mat - 385-5560

Warranty: Manufacturer’s
• Absorbs large amounts of coolant, oil, solvents, and water, 7.8 gallons (29.5 L)
• Heavy-weight and durable
• Perforations every 10” lengthwise and every 3.75” widthwise to help you easily fit
the mat into the shape of your workspace
• 60’ L x 15” W fitted into dispenser box
• Dark gray, flame-resistant material
• 50% recycled material
• Refill item for Spill Response Kit, 254-3770

Part Shipping
Number Description Absorption Dimensions Weight
385-5560 Absorbent Roll with length - 29.5 L (7.8 gal) 15 in (38 cm) wide x 60 ft (18 cm) long 6.9 lbs (3.1 kg)
and widthwise perforations

High-Visibility Absorbent Mat

Warranty: Manufacturer’s
• Absorbs oils, coolants, solvents and water
• Ideal for any leak-, spill-, or drip-prone areas
• Absorbs a wide range of chemicals without degrading or causing a dangerous
chemical reaction
• High-visibility yellow color alerts workers to potential dangers where work or re-
pairs are taking place
• Flame-resistant - safe for spark-prone areas such as welding robots
• Comes with a variety of socks and pillows along with a roll of universal mat
• Low profile — slides into hard-to-reach areas
• Supplier-branded product

Part
Number Absorbent Capacity Length Width Weight Material Ply
261-0115 125 L (33 gal) per bag 46 m (151 ft) 61 cm (24 in) 11 kg (24 lb) 100% 8
polypropylene

376
 Absorbents and Spill Kits — Absorbents
Oil-Only Absorbent Material
Warranty: Manufacturer’s
• Heavyweight, white, absorbent material used for spill cleanup and everyday
maintenance absorption of non-flammable petroleum products and petroleum-
based fluids, such as oil, gasoline, kerosene, diesel fuel, solvents, etc.
• Absorbs petroleum-based fluids only—ideal for situations where water absorp-
tion is not necessary
• Roll material works great for factory floors saturated with oils or other petroleum-
based fluids
• Less expensive than a universal absorbent (ideal for oil-only spills or drips)
• Material will not degrade or have a chemical reaction to petroleum-based fluids
• Absorbs 10 times its weight, reducing material purchase and disposal costs
• Dimple design helps absorb more liquid in less time (material retains liquid even
when fully saturated)
• Roll material cuts easily with scissors or razor knife — easily shaped to fit virtu-
ally any area
• Material: 100% polypropylene
• Multiple layers are held together with thermal bond points for added strength and
durability—will not fall apart or leave behind residue, even when fully saturated
• Material can be incinerated with less than 0.1% ash while producing 21,000 Btu/
lb
• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product unless otherwise indicated

Quantity/ Absorption/ Absorption/ Shipping

Part Number Description Box Box/Roll Pad Size Weight Ply Color
235-0850 Oil-Only Absorbent Roll 1 roll 155 L (41 gal) — 76 cm (30 in) wide 46 m 14 kg (30.86 lb) 8 White
(150 ft) long
307-9921 Oil-Only Absorbent 50 pads 45 L (12 gal) 917 ml 38 x 51 cm (15 x 20 in) 4 kg (8.82 lb) 8 White
Pad (31 oz)
307-9923 Oil-Only Absorbent 100 pads 76 L (20 gal) 739 ml 38 x 48 cm (15 x 19 in) 8 kg (17.64 lb) 3 White
Pad (25 oz)
307-9924 Oil-Only Absorbent Roll 1 roll 151 L (40 gal) – 76 cm (30 in) wide 46 m 15 kg (33.07 lb) 3 White
(150 ft) long
307-9926 Oil-Only Absorbent Roll 1 roll 151 L (40 gal) – 76 cm (30 in) wide 46 m 15 kg (33.07 lb) 3 White
(150 ft) long
307-9928 Oil-Only Absorbent 100 pads 76 L (20 gal) 739 ml 38 x 48 cm (15 x 19 in) 8 kg (17.64 lb) 3 White
Pad (25 oz)

377
Absorbents and Spill Kits — Absorbents
Lightweight Absorbent Roll
Warranty: Manufacturer’s
• Lightweight, gray, absorbent mat designed to cover areas prone to overspray and
spills, leaving a cleaner, safer work area
• Ideal for light machine overspray and small, annoying leaks of oils, coolants, sol-
vents, and water
• Great for day-to-day housekeeping and repair work
• Cross roll perforations — easily and quickly tear to any size sheet, as small as 25
x 61 cm (10 x 24 in)
• Works well in narrow walkways
• Multiple layers are held together with thermal bond points for added strength and
durability—will not fall apart or leave behind residue
• Absorbs 10 times its weight, reducing purchase and disposal costs
• Dark gray color hides dirt and grime
• Dimple design absorbs more liquid in less time and greater liquid retention holds
liquid even when roll is saturated
• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product
Part
Number Quantity/Box Absorption/Box Size Material Ply Shipping Weight
235-0849 1 roll 125 L (33 gal) 61 cm (24 in) wide by 91 M (300 ft) long 100% polypropylene 8 11 kg (24.25 lb)

Floor Dry - 4C-5751

Warranty: Cat Standard Warranty, 6 Months
• Diatomaceous Earth Absorbent
• Cleans spills with no residue

Part Number Description

4C-5751 Floor Dry

378
 Absorbents and Spill Kits — Spill Kits
Sorbent Spill Kits
Warranty: Cat Standard Warranty, 6 Months
• Most versatile spill kit on today's market
• Chemical Sorbent Folded Spill Kit is a non-selective sorbent which will "sorb"
most aggressive chemicals
• 170-8604 fits into small places where accessibility is important; unique construc-
tion and compressibility allows storage behind or under seats and/or lab benches
where other spill kits will not fit
• 170-8605 is packaged in a 20 gallon drum and can be placed in key locations
throughout a facility
• Most complete spill kit in a roll (material can be used as a pillow, pad, roll, or
boom)
• Scrim coating on one side increases strength and eliminates linting
• Each kit contains a containment bag and tie
• Molded handles makes transportation easier
170-8604 Spill Kit, 5 Gallon
• Absorb 5 gallons of petroleum-based fluid
• Roll of folded sorbent, 13 x 66 cm (5 x 26 in); fully opened 48 x 66 cm (19 x 26 in);
Qty 1
• Disposal bag and tie, Qty 1
170-8605 Spill Kit, 31 Gallon
• Absorb 31 gallons of petroleum-based fluid
• 20 gallon drum with lid and plastic closure ring, Qty 1
• Roll of folded sorbent, 13 x 127 cm (5 x 50 in); fully opened, 48 x 127 cm (19 x 50
in), Qty 2
• Sorbent pads, 43 x 48 cm (17 x 19 in), Qty 30
• Disposal bags and ties, Qty 3

Part Number Description Size

170-8604 Sorbent Spill Kit 5 gal
170-8605 Sorbent Spill Kit 31 gal

379
Absorbents and Spill Kits — Spill Kits
Small Spill Response Bag
Warranty: Manufacturer’s
• Highly-visible wall mounted bag
• Absorbs oils, coolants, solvents, and water
• Can absorb up to 38 liters (10 gallons)
• Water resistant bag with hook and loop closure opens and closes easily
• Compact size — can be mounted throughout the shop where spills are most likely
to occur
• Weight: 6.4 kg (14 lbs)
• Helps to comply with 40 CFR 263:30 (a)
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product

Part Number Description Weight Size Qty.

254-3767 Small Spill Response Bag 6.4 kg (14.11 lb) – –
Consists of:
235-0844 Absorbent sock – 8 cm x 122 cm (3 in x 48 in) 4
235-0848 (1) Universal mat pads – 51 cm x 41 cm (20 in x 16 in) 50

Small Spill Response Cart

Warranty: Manufacturer’s
• Absorbs oils, coolant, solvents, and water
• Ideal for spill-prone areas
• Comes with a variety of socks, mat pads, pillows, and wipers
• Products in cart can absorb up to 59 liters (15.5 gallons)
• Eight-inch rubber wheels and handles on both top and bottom for carrying
• Cleanup instructions on cart door
• Cart can be locked for security
• Helps to comply with 40 CFR 112.7(c) (1) (vii) where absorbents can be used to
control oil discharges
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product

Consist Qty. Reorder Part No.

Absorbent sock, 8 cm x 122 cm (3 in x 48 in) 3 235-0844
Absorbent sock, 8 cm x 250 cm (3 in x 10 ft) 2 254-3969
Universal mat pads, 38 cm x 22 cm (15 in x 8.5 in) 52 307-9919
Absorbent pillows, 25 cm x 25 cm (10 in x 10 in) 10 235-0845
Wipers, 33 cm x 30 cm (13 in x 12 in) 56
Disposal bags and ties 5

1 Not available for individual sale

380
 Absorbents and Spill Kits — Spill Kits
Small Spill Response Cart (Cont'd.)
Consist Qty. Reorder Part No.
Nitrile gloves 1 4C-5522, 4C-5523, or 4C-5526
Safety goggles 1 233-8583
Disposable boots 1
Repair putty, 178 mm (7 in) tube 2
Emergency response guidebook 1
Instruction Manual 1

Part Number Description Weight

254-3768 Small Spill Response Cart 29.5 kg (65.04 lb)

Small Spill Response Cart

Warranty: Manufacturer’s
• Absorbs oils, coolant, solvents, and water
• Ideal for spill-prone areas
• Comes with a variety of socks and pillows along with a roll of universal mat
• Products in cart can absorb up to 53 liters (14 gallons)
• Eight-inch rubber wheels on board and handles on both top and bottom
• Cleanup instructions on cart door
• Shelves and compartments inside cart for easy organization
• Cart can be locked for security
• Helps to comply with 40 CFR 112.7(c) (1) (vii) where absorbents can be used to
control oil discharges
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product

Consist Qty. Reorder Part No.

Absorbent socks, 8 cm x 122 cm (3 in x 48 in) 5 235-0844
Universal mat pads, 38 cm x 18 m (15 in x 60 ft) 1
Absorbent pillows, 25 cm x 25 cm (10 in x 10 in) 4 235-0845
Disposable bags and ties 5
Nitrile gloves 1 4C-5522, 4C-5523, or 4C-5526
Safety goggles 1 233-8583
Repair putty, 178 mm (7 in) tube 1
"When the Spill Strikes" poster 1

Part Number Description Weight

254-3770 Small Spill Response Cart 18 kg (39.68 lb)

381
Absorbents and Spill Kits — Spill Kits
Large Spill Response Kit

• Absorbs oils, coolants, solvents, and water

• Comes with a variety of socks, mats, pillows, and loose absorbents
• Products in cart can absorb up to 144 liters (38 gallons)
• Polyethylene container with hinged lid stores and protects absorbents from mois-
ture, dirt, and damage
• Equipped with eight-inch rubber wheels and built-in handles for easy mobility in
tight spaces
• Helps to comply with 40 CFR 112.7(c) (1) (vii) where absorbents can be used to
control oil discharges
• Material Safety Data Sheets (MSDS) available
• Supplier-branded product

Consist Qty. Reorder Part No.

Absorbent sock, 8 cm x 122 cm (3 in x 48 in) 4 235-0844
Absorbent sock, 8 cm x 250 cm (3 in x 10 ft) 1 254-3969
Absorbent pillows, 53 cm x 43 cm (21 in x 17 in) 2 235-0845 (2)
Universal mat pads, 51 cm x 41 cm (20 in x 16 in) 50
Disposal bags and ties 5
Shop floor sweep material 1
Loose absorbent material 2
Tamper-proof labels 6
Instructions 1

Part Number Description Weight

254-3769 Large Spill Response Kit 48.5

2 Equivalent - not an exact replacement

382
 Floor Mats
473-6461 Grippy Absorbent Traffic Floor Mat
Warranty: Caterpillar Standard Warranty, Six Months
• Absorbs and retains water, oils, grease, coolants, solvents, etc., while preventing
dirt, sand, and liquids from being tracked off onto clean floors
• Demonstrated to reduce slips and falls by as much as 90%
• Grippy backing holds mat in place but peels up easily without residue
• Heat-fuse and needle-punched for durability
• Holds up to heavy traffic, including power trucks
• Liquidproof barrier layer prevents seepage through the mat
• Dark color hides grime allowing longer use
• Absorbs up to 13 gal (49 L)
• Medium weight
• 36 in x 100 ft (914 mm x 30 m)
• 24 pounds (11 kg)

Rugs
Warranty: Cat Standard Warranty, 6 Months
• Keep shop floors cleaner and safer
• Absorb most shop fluids and oils
• Tough and tear resistant—won't break down
• Durable enough to withstand heavy traffic
• Coated rug has a poly-backed coating to provide extra protection to shop floors

Part Number Description Size Absorbent Capacity

159-5155 Rug 91 cm x 91.5 m (36 in x 300 ft) 121 L (32 gal) per roll
159-5160 Rug (Coated) 91 cm x 30 m (36 in x 100 ft) 40 L (10.5 gal) per roll

WorkSafe Floor Mat

Warranty: Cat Standard Warranty, 6 Months

• Holes trap dirt and small debris and are easy to clean
• Black with orange beveled border
• Border can be removed and reattached after cutting mat to any size
• 7/8 in (22.2 mm) thick

Part Number Size

4C-8099 2 ft x 3 ft (61 cm x 91 cm)
4C-8101 3 ft x 5 ft (91 cm x 152 cm)

383
Floor Mats
Rejuvenator Connect Modular Floor Mat

Warranty: Cat Standard Warranty, 6 Months

• Interlocks on all four sides

• Customizable down to 3 x 3 ft (0.914 x 0.914 m) squares
• Resists a wide variety of chemicals of fluids
• Border ramps are yellow for safety
• Urethane sponge material with tough outer skin
• 5/8” in (1.59 cm) thick

Part Number Description Size

384-8706 Center Segment 36 in x 36 in (91.4 cm x 91.4 cm)
385-8474 Male Ramp 2 in x 39 in (5.1 cm x 99 cm)

Weldsafe Floor Mat

Warranty: Cat Standard Warranty, 6 Months

• Designed specifically for welding/grinding stations

• Top surface has melting point of over 500°F (260°C)
• Beveled edges
• Black
• 9/16 in (1.4 cm) thick

Part Number Size

385-8475 36 in x 60 in (91 cm x 152 cm)

Clean Walk Mats

Warranty: Cat Standard Warranty, 6 Months
SMCS Code 7951-580
• 30 peelable layers, providing a fresh cleaning surface with each exposed layer
• Removes dirt and contamination from shoes, wheels, and other passing objects –
keeps dirt and grease from being tracked into office area
• Inexpensive way to keep carpets and office areas clean
• Low profile – only 0.055 in (1.4 mm) thick

Part Number Size

138-3856 635 mm x 1143 mm (25 in x 45 in)

384
 Tape
General Purpose Masking Tape
Warranty: Cat Standard Warranty, 6 Months
• Can be used for holding, bundling, sealing, tabbing non-critical masking and many
other miscellaneous applications where an economical grade of paper tape is
needed

Part Number Size in 55 m (60 Yd) Rolls Rolls/Case

4C-6571 25.4 mm (1 in) 36
4C-6572 50.8 mm (2 in) 24
4C-6573 76.2 mm (3 in) 12

Masking Paper
Warranty: Cat Standard Warranty, 6 Months
• Specially formulated, high density masking paper that helps reduce labor cost,
decreases rework, and minimizes cleanup
• Its unique, virtually "pinhole-free" construction delivers exceptional paint and sol-
vent resistance to help eliminate bleed-through
• For protection, each roll is individually wrapped
• The paper's balanced construction offers conformability, strength, and easy
handling

Rolls/
Part Number Description Size Case
1U-9732 Masking Paper 304.8 mm x 304.8 m (12 in x 1000 ft) 3
1U-9733 Masking Paper 609.6 mm x 304.8 m (24 in x 1000 ft) 1
1U-9734 Masking Paper 914.4 mm x 304.8 m (36 in x 1000 ft) 1

Masking Tape
Warranty: Cat Standard Warranty, 6 Months
• Six sizes available—13 mm (1/2 in) to 76.2 mm (3 in) wide, 60 yd. roll
• Clean removal—less adhesive transfer reduces residue which can stick to work
surface
• Sharp paint edge—thin, smooth backing gives a superior, straight paint line with
no jagged edges
• One-piece removal—balanced construction allows for one-piece removal
• Heat resistant—will generally function well in conditions up to 93° C (200° F)

Part Number Size in 55 m (60 Yd) Rolls Rolls/Case

1U-6705 12.7 mm (1/2 in) 72
1U-6706 19.0 mm (3/4 in) 48
1U-6707 25.4 mm (1 in) 36
1U-6708 50.8 mm (2 in) 24

385
Tape
Masking Tape (Cont'd.)
Part Number Size in 55 m (60 Yd) Rolls Rolls/Case
1U-6709 63.5 mm (2 1/2 in) 12
1U-6710 76.2 mm (3 in) 12

Label Protection Tape

Warranty: Cat Standard Warranty, 6 Months
• Used for covering address labels, packing lists, and sales slips when protection
against rough handling is needed
• Aggressive water-based acrylic adhesive
• Resistant to UV light and chemicals
• Adhesion to steel: 17.9 N/cm (16 oz/in)
• Tensile strength: 0.32 kg/mm (18 lb/in)
• Thickness: 0.04 mm (1.6 mils)
• Material: polypropylene

Part Number Size Rolls/Case

263-0881 96.01 mm x 659.9 m (3.78 in x 216.5 feet) roll 18

Filament Tape
Warranty: Cat Standard Warranty, 6 Months
• Stain resistant and transparent with reinforced continuous glass yarn filaments
• Used for closure and reinforcement of corrugated fiberboard boxes and performs
well in holding, reinforcing, combining, bundling, and unitizing applications

Part Number Size Package Quantity

4C-4094 19 mm (3/4 in) x 55 m (60 yd) roll 48

Filament Tape
Warranty: Cat Standard Warranty, 6 Months
• Fiberglass reinforced tape excellent for light-duty applications such as strapping,
palletizing, and packaging
• Adhesion to steel: 8.5 g/mm (78 oz/in)
• Elongation: 8%
• Tack: 12.7 cm (5 in)
• Tensile strength: 1.71 kg/mm (95.6 lb/in)
• Thickness: 0.099 mm (3.9 mils)

386
 Tape
Filament Tape (Cont'd.)
Part Number Size Rolls/Case
263-0883 8.89 mm x 548.64 m (0.35 in x 180 feet) 96

Transparent Tape
Warranty: Cat Standard Warranty, 6 Months
• Good for general purpose packaging needs
• Was developed primarily for single strip closure of regular slotted containers
• Has very good resistance to edge tear and splitting due to shock from impact
• Adhesive sticks at a touch to fiberboard

Part Number Size Package Quantity

4C-4095 48 mm (2 in) x 100 m 36

Double-faced Tape
Warranty: Cat Standard Warranty, 6 Months
• Multipurpose tape for general mounting and holding
• Can be used to reattach interior cab material or head liners, sound proofing mate-
rial, etc.
• Extremely aggressive adhesive
• Silicone-coated polyethylene release liner makes unwinding easy
• Peels clean leaving minimum residue
• Adhesion to steel: 44 g/mm (40 oz/in)
• Tack: 5.1 cm (2 in)
• Tensile strength: 0.36 kg/mm (20 lb/in)
• Thickness: 0.28 mm (11 mils)

Part Number Size Rolls/Case

263-0877 51 mm x 22.9 m (2 in x 25 yards) roll 24

387
Tape
Thread Seal Tape
Warranty: Cat Standard Warranty, 6 Months
• Multipurpose non-adhesive thread seal tape used for many maintenance
applications
• Polytetraflouroethylene (PTFE) self lubricates joints for a leak-proof seal
• Easy to assemble and disassemble threaded joints when tape is applied
• Thickness: 0.09 mm (3.5 mils)
• Material: polytetraflouroethylene

Part
Number Size Rolls/Case Color
263-0879 13 mm x 76.2 m (0.5 in x 250 feet) roll 200 White

Duct Tape
Warranty: Cat Standard Warranty, 6 Months
• Use this silver, polyethylene-coated, cloth tape for sealing and/or waterproofing
applications
• Has an extremely tough rubber adhesive

Package
Part Number Size Quantity
190-9792 51 mm (2 in) wide and 55 m (60 yds) long 1

High Performance Duct Tape

Warranty: Cat Standard Warranty, 6 Months
• Use this olive drab, polyethylene-coated, cloth tape for sealing and/or water-
proofing applications
• Conforms to mil spec PPP-T-60D
• Rubber adhesive adheres securely
• Thickness: 12 mils
• Tensile strength: 42 lbs per inch

Part Package
Number Size Quantity
9U-5922 51 mm wide x 55 mm long (2 in wide x 60 yd long) 1

388
 Tape
Electrical Tape
Warranty: Cat Standard Warranty, 6 Months
• Premium quality vinyl tape with many electrical insulation applications

Package
Part Number Size Quantity
1P-0810 19 mm x 20.12 m long (3/4 in wide x 66 ft long) 10

Electrical Tape
Warranty: Cat Standard Warranty, 6 Months
• Quality, black, vinyl tape with excellent electrical insulation properties

Package
Part Number Size Quantity
235-8598 19 mm x 18.3 m long (3/4 in wide x 60 ft long) 10

Aluminum Tape
Warranty: Cat Standard Warranty, 6 Months
• A variety of sizes of aluminum tape that can be used to seal openings of various
machine components such as cylinder assembly tubes during shopping and
storage
• 3.5 Mil thick
• Tough but flexible
• Hi-tack
• Waterproof

Part Number Description Size

9U-6910 Aluminum Tape 63.5 mm x 45.7 m (2 1/2 in x 50 yds)
9U-6911 Aluminum Tape 101.6 mm x 45.7 m (4 in x 50 yds)
9U-6912 Aluminum Tape 152.4 mm x 45.7 m (6 in x 50 yds)
9U-7042 Aluminum Tape 304.8 mm x 45.7 m (12 in x 50 yds)

389
Tape
Box Sealing Tape Dispenser
Warranty: Cat Standard Warranty, 6 Months
• Provides quick, easy method for dispensing 4C-4095 Transparent Tape, or any oth-
er film-backed box sealing tape directly from the roll
• Hand-held and portable—excellent on center seam sealing of regular slotted
boxes
• Sturdy, durable, easy to load and operate; handles tape widths from 38 mm (1 1/2
in) to 51 mm (2 in)

Part Number Package Quantity

4C-4099 1

Filament Tape Dispenser

Warranty: Cat Standard Warranty, 6 Months
• Fast and economical clips of 4C-4094 Filament Tape can be applied
• Dispenser cuts and buffs tape with one-hand motion
• Features hand brake in the core that allows operator to adjust tension for tighter
box reinforcement and bundling applications
• High impact plastic and one piece construction makes the dispenser very durable
• Handles filament tapes up to 19 mm (3/4 in) wide

Part Number Package Quantity

4C-4100 1

Rubber Mastic Tape

Warranty: Cat Standard Warranty, 6 Months
• Great for quick buildup for moisture seal, for insulation, and for cushion on cable
harness and wires
• Sticks fast, seals fast and stays tight
• Molds easily around irregular surfaces while holding its position through a range
of temperatures

Part Number Size Package Quantity

4C-6392 51 mm (2 in) wide X 1.7 mm (.065 in) thick 1 Roll
by 3 m (10 ft) long rolls

390
 Packing Supplies and Equipment
Handwrappers
Warranty: Cat Standard Warranty, 6 Months
• Full rolls to 558.8 mm (22 in) wide
• Fits 76.2 mm (3 in) core
• Heavy duty mast
• Ball bearings
• Adjustable tension
• Ring rotates freely
• Foam grip

Part Number Description Use

4C-4776 Handwrapper all 279 mm (11 in), 400 mm (15.75 in), 457 mm (18 in) films with 76
mm (3 in) cores
4C-4777 Handwrapper all 279 mm (11 in), 692 mm (27.25 in), 457 m (18 in) films with 57 mm
(2.25 in) and 76 mm (3 in) cores

Adjustable Stretch Band-it Tool

Warranty: Cat Standard Warranty, 6 Months
• Fully mechanical
• Adjustable stretch control
• No spare parts—no parts to replace or wear out
• Use with 4C-4880 Film

Part Number Description

4C-4779 Adjustable Stretch Band-it Tool

Stretch Band-it Tool

Warranty: Cat Standard Warranty, 6 Months
• "Hand Squeeze" control
• No assembly, no maintenance, no additional adhesives
• Use with 4C-4880 Film

Part Number Description

4C-4780 Stretch Band-it Tool

391
Packing Supplies and Equipment
Stretch Band-it Stand
Warranty: Cat Standard Warranty, 6 Months
• Portable
• Mounts on any table surface
• Accommodates up to 16 kg (35 lbs)
• Adjustable zinc-plated support
• Allows wrapping of smaller items using 4C-4880 Film and 4C-4779 or 4C-4780
Stretch Band-it Tools

Part Number Description

4C-4781 Stretch Band-it Stand

Heavy-Duty Master Wrap Film

Warranty: Cat Standard Warranty, 6 Months
• Holds anything, any shape, anywhere
• Applicator packed in all cases
• Heavy-duty gauge

Part Number Rolls/Case Film Gauge Film Width Roll Length Film Color
4C-4880 12 135 127 mm (5 in) 198 m (649.60 ft) Blue

Stretch Film
Warranty: Cat Standard Warranty, 6 Months
• Revolutionary performance standard—one of the strongest films in the industry
• Cast formula
• Stiff high force
• No neck-down films
• Has highest holding-force-to-load possible without breaks
• Visually able to see through to wrapped product

Part Number Rolls/Case Film Width Roll Length Film Color

291-6710 4 457.2 mm (18 in) 457 m (1,499.34 ft) Clear
291-6711 4 279.4 mm (11 in) 457 m (1,499.34 ft) Clear

392
 Packing Supplies and Equipment
Hand Wrap Standard-Duty Stretch Film
Warranty: Cat Standard Warranty, 6 Months
• Convenient stretch film system
• Extra wide—508 mm (20 in) compared to 457.2 mm (18 in)
• Standard-duty gauge

Part Number Rolls/Case Film Width Roll Length Film Color

293-2978 4 508 mm (20 in) 305 m (1,000.65 ft) Clear

Heat Shrink Bags

Warranty: Cat Standard Warranty, 6 Months
• Strong durable plastic excellent for pallet unitization and load retention
• Ensures product will arrive at destination clean and undamaged
• To determine the size of opening for gusseted bags, add the width and depth
• UVI protection will protect bag from sun damage in outdoor storage.

Part Number Width x Depth x Height Thickness Qty.

Gusseted Heat Shrink Bag
270-5329 800 x 495 x 710 mm (31.5 x 19.5 x 28 in) 5 mil 135 bags/roll
270-5331 1257 x 495 x 1370 mm (49.5 x 19.5 x 54 in) 5 mil 65 bags/roll
Flat Heat Shrink Bag
270-5332 2438 x 1829 mm (96 x 72 in) 5 mil 35 bags/roll
270-5333 3810 x 2970 mm (150 x 117 in) 5 mil 15 bags/roll

Cardboard Boxes with Cat Logo

Warranty: Cat Standard Warranty, 6 Months
• Material: corrugated paper

Edge Crush Number

Part Number Length x Width x Depth (ECT) Qty.
270-5348 213 x 213 x 210 mm (8.4 x 8.4 x 8.3 in) 32 lb 25 per package
270-5349 254 x 203 x 170.8 mm (10 x 8 x 7 in) 32 lb 25 per package
270-5350 300 x 300 x 190 mm (11.8 x 11.8 x 7.5 in) 32 lb 20 per package
270-5351 318 x 315 x 224 mm (12.5 x 12.4 x 8.8 in) 32 lb 25 per package
270-5352 356 x 356 x 229 mm (14 x 14 x 9 in) 32 lb 10 per package
270-5353 648 x 648 x 503 mm (25.5 x 25.5 x 19.8 in) — 5 per package

393
Packing Supplies and Equipment
Heat Shrink Sheeting
Warranty: Cat Standard Warranty, 6 Months
• Strong durable plastic excellent for pallet unitization and load retention
• Ensures product will arrive at destination clean and undamaged
• 5% UVI protection will protect bag from sun damage in outdoor storage

Part Number Roll Size Thickness Color Qty.

270-5334 5.5 x 61 m (18 x 200 ft) 7 mil white 1 roll
270-5335 914 mm x 198 m (36 in x 650 ft) 5 mil clear 1 roll
270-5336 1.37 x 198 m (54 in x 650 ft) 5 mil clear 1 roll

Maintenance Products Box

Warranty: Cat Standard Warranty, 6 Months
The Maintenance Products box preventive maintenance items, such as filters and
grease, for machine service intervals. Designed to support dealer promotional cam-
paigns and over-the-counter part sales; the carton assembles easily and has a con-
venient carrying handle.
• Made of recyclable heavy duty cardboard
• Practical handle for easy transport
• Includes blank lines for recording box contents
• Simple assembly
• Bundled unassembled in quantities of 20
• Dimensions: 16" x 14" x 12"

Part Number Description Qty.

390-3319 483 X 457 X 381 mm (19 X 18 X 15 in) 10 per bundle
332-1471 406 X 356 X 305 mm (16 X 14 X 12 in) 20 per bundle

Plastic Bags with Cat Logo

Warranty: Cat Standard Warranty, 6 Months
• Two-color Cat logo on front, clear on the back
• Great for parts storage and shipping
• Exceptional strength
• Material: linear low density polyethylene (LLDPE)

Part
Number Bag Size Thickness Qty.
270-5337 30.48 cm x 45.72 cm (12 x 18 in) 1.75 ml 1000 bags/carton
270-5338 45.72 cm x 61 cm (18 x 24 in) 1.75 ml 500 bags/carton

394
 Packing Supplies and Equipment
High Performance Steel Strapping
Warranty: Cat Standard Warranty, 6 Months
• Great for stabilizing heavy loads during transportation
• Break strength: 972.2 kg (2150 lbs)

Part Number Size Thickness

270-5343 19 mm x 624.8 m ( 3/4 in x 2050 ft) 0.5 mm (0.02 in)

Strapping Seals
Warranty: Cat Standard Warranty, 6 Months
• Easy to use strapping buckles
• Holds tension strong for nylon poly strapping
• Used with 270-5345 Nylon Cord Strapping, 12.7 mm (1/2 in) wide

Part Number Size Qty.

270-5344 12.7 mm (1/2 in) 1000 buckles per carton

High Performance Nylon Cord Strapping

Warranty: Cat Standard Warranty, 6 Months
• Economical alternative to steel strapping
• Easy to use on a wide range of products
• Used with 270-5344 Strapping Seals, 12.7 mm (1/2 in)
• Breaking strength: 272.1 kg (600 lbs)

Part Number Size Color Qty.

270-5345 12.7 mm x 1188.7 m (1/2 in x 3900 ft) White 4 rolls per box

395
Packing Supplies and Equipment
Shrinkfast Shrink Gun
Warranty: Cat Standard Warranty, 6 Months
• Portable — 3.5 lbs
• Fast — shrinkwrap a 1016 mm x 1219.2 mm x 1524 mm (40 in x 48 in x 60 in) pallet
in less than two minutes
• UL listed
• Fast shrinkwrapping — the shrink gun is faster and holds more securely than ei-
ther stretch-wrapping or banding
• Versatile — the shrink gun can be used on machinery, bagged products, boxes,
pallets, construction materials, chemicals, petroleum containers, metals cabinets,
and shelving
• Safe — operates with a safety latch trigger to prevent unintentional firing and
shuts off automatically when put down
• Product support — repair parts are available through the Caterpillar Parts Distri-
bution system

Part Heat Operating Air

Number Description Capacity Propane Usage Pressure Consumption
4C-4515 Shrinkfast Shrink Gun – 2.6 kg/hr (5.71 lb/hr) 22.00 psi 21 CFM
Repair Parts (Warranty: Six Months)
4C-4511 Fuel Line – – – –
4C-4512 Valve Assembly – – – –
4C-4513 Hose Adapter – – – –
4C-4514 Spark Plug – – – –
4C-4516 Regulator Assembly – – – –
4C-4517 Gauge (Pressure) – – – –
4C-4518 U.L. Guard – – – –

Poly Coat Paper

Warranty: Cat Standard Warranty, 6 Months
• Used for protecting metal parts and tools, metal sheeting interleaving, protecting
goods on pallets from moisture and debris
• Fifty pound virgin kraft paper with 10 pound polycoating
• Heavy duty protection from water, grease, and oil
• Fits standard dispenser — 3-inch core with plugs that reduce it to 1 inch

Part Number Description Size

263-0891 Poly Coat Paper 914.4 mm x 274.3 m (36 in x 900 feet) roll

396
 Packing Supplies and Equipment
Electric Tie Strap Tightener
Warranty: Manufacturer’s
• Tightens cable ties and cuts off excess when preset tension is attained
• Used with straps, harnesses, and hoses
• Has a comfortable grip and handle for all hand sizes
• Tightens up to 12.7 mm (1/2 in) wide straps
• Weight: 454 g (16 oz)

Part Number Description

4C-5877 Electric Tie Strap Tightener

Label Maker Kit

Warranty: Cat Standard Warranty, 6 Months
• Create metal labels that stand up to harsh weather, temperature and corrosion
• For tagging hoses, castings, engine components, pipes, etc.
• Heavy-duty cast aluminum body construction
• Built-in hole punch
• Front scissors cut-off—cuts tape exactly where required
• Tape advance and rewind control
• Wheel characters-selection window helps reduce embossing errors
• Also embosses 12.6 mm (1/2 in) vinyl tape
• 306-9601 tags will fit hose up to 3.25 inches in diameter

Part
Number Description Size Qty.
9U-7918 Label Maker Kit – –
9U-7918 Label Maker Kit
9U-7920 Aluminum Tape Roll, 12.7 mm (1/2 in) x 4.88 m (16 ft) x 0.1524 mm (0.006 in thick) 10 per box
no adhesive
Optional
306-9601 Aluminum Hose Tag (1) 12.7 mm (1/2 in) x 279.4 mm (11 in) x .305 mm (.012 in) thick 500 per box
9U-7920 Aluminum Tape Roll, 12.7 mm (1/2 in) x 4.88 m (16 ft) x 0.1524 mm (0.006 in thick) 10 per box
no adhesive
9U-7921 Aluminum Tape Roll, 12.6 mm (1/2 in) x 3.66 m (12 ft) x 0.33 mm (0.13 in thick) 10 per box
with adhesive
9U-7922 Stainless Steel Tape 12.7 mm (1/2 in) x 6.41 m (21 ft) x 0.127 mm (.005 in thick) 10 per box
Roll, no adhesive

1 Warranty: Six Months

397
Miscellaneous — Padlocks
Combination Padlock - 285-1145
Warranty: Manufacturer, Two Years
• Cat part number engraved on side of padlock

Horizontal Shackle Vertical Shackle

Part Number Combination Type Lock Mechanism Width Shackle Diameter Clearance Clearance
285-1145 Resettable 4-digit dialing 50.8 mm (2 in) 7.9 mm (5/16 in) 25.4 mm (1 in) 25.4 mm (1 in)

Combination Padlock - 285-1146

Warranty: Manufacturer, Two Years
• Cat part number engraved on back of padlock

Combination Horizontal Shackle Vertical Shackle

Part Number Type Lock Mechanism Width Shackle Diameter Clearance Clearance
285-1146 fixed 3-digit dialing 47.6 mm (1 7/8 in) 7.1 mm (9/32 in) 20.6 mm (13/16 in) 19.0 mm (3/4 in)

High Security Brass Padlock - 285-1147

Warranty: Manufacturer, Two Years
• Lock body and shackle black with Cat logo on both sides of bumper, Cat part num-
ber on side of bumper

Number of Vertical Shackle

Part Number Pin Tumblers Width Shackle Diameter Horizontal Shackle Clearance Clearance
285-1147 5 44.4 mm (1 3/4 in) 7.1 mm (9/32 in) 20.6 mm (13/16 in) 22.3 mm (7/8 in)

High Security Brass Padlock - 285-1148

Warranty: Manufacturer, Two Years
• Lock body and shackle black with Cat logo on both sides of bumper, Cat part num-
ber on side of bumper

398
 Miscellaneous — Padlocks
High Security Brass Padlock - 285-1148 (Cont'd.)
Package Number of Pin Horizontal Shackle Vertical Shackle
Part Number Quantity Tumblers Width Shackle Diameter Clearance Clearance
285-1148 2 5 44.4 mm (1 3/4 in) 7.1 mm (9/32 in) 20.6 mm (13/16 in) 22.3 mm (7/8 in)

High Security Brass Padlock - 285-1149

Warranty: Manufacturer, Two Years
• Lock body and shackle black with Cat logo on both sides of bumper, Cat part num-
ber on side of bumper

Number of Horizontal Shackle

Part Number Pin Tumblers Width Shackle Diameter Clearance Vertical Shackle Clearance
285-1149 5 44.4 mm (1 3/4 in) 7.1 mm (9/32 in) 20.6 mm (13/16 in) 63.5 mm (2 1/2 in)

High Security Brass Padlock - 285-1150

Warranty: Manufacturer, Two Years
• Lock body and shackle black with Cat logo on both sides of bumper, Cat part num-
ber on side of bumper

Package Number of Pin Horizontal Shackle Vertical Shackle

Part Number Quantity Tumblers Width Shackle Diameter Clearance Clearance
285-1150 4 5 44.4 mm (1 3/4 in) 7.1 mm (9/32 in) 20.6 mm (13/16 in) 63.5 mm (2 1/2 in)

399
Miscellaneous — Ladders
Step Ladders and Shelf Ladders
Warranty: Cat Standard Warranty, 6 Months
Step Ladder
• Fiberglass nonconductive industrial step ladder designed for everyday use
• Extra heavy-duty, 136 kg (300 lb) weight rating
• Thick non-marring rubber tread provides a slip resistant footing
• Wide back braces provide maximum stiffness and discourages unsafe climbing
• Full channel fiberglass rails are covered with a polyester veil for years of service
• Double-rivet step construction with tubular steel rivets for maximum strength
• Nonconductive structural molded top with tool slots is extremely durable (slots
help keep tools close at hand)
• Spreader braces are located inside rails to help protect them from getting hooked
or damaged in transit
• Reinforced bottom back brace provides additional strength to bottom of ladder

Shelf Ladder
• Aluminum industrial shelf ladder for everyday industrial use
• Extra heavy-duty, 136 kg (300 lb) weight rating
• Steps are level when ladder is set at 72 degrees
• Equipped with thick rubber bumpers extending 152 mm (6.0 in) from top of ladder
down side rails
• Two pair of heavy duty steel gussets support bottom step
• Angled feet with thick rubber tread on both legs provide sure footing
• Each step is secured with solid aluminum rivets for maximum strength

Part Number Description Height Step Size Bottom Width Approx. Spread Approx. Weight
263-1022 Shelf Ladder 2.4 m (7.87 ft) 7.6 cm (2.99 in) 38.1 cm (15 1/64 in) – 7.7 kg (16.98 lb)
263-1030 Step Ladder 1.2 m (3.94 ft) 7.6 cm (2.99 in) 45.7 cm (18 1/64 in) 71 cm (27.95 in) 5.9 kg (13.01 lb)
263-1031 Step Ladder 2.4 m (7.87 ft) 7.6 cm (2.99 in) 61.0 cm (24 1/64 in) 132 cm (51.97 in) 12.2 kg (26.90 lb)

400
 Miscellaneous — Janitorial Products
Brooms
Warranty: Cat Standard Warranty, 6 Months
Push Broom
• 100% Select black tampico
• Clear lacquered half-round hardwood block
• Recommended for dry sweeping semi smooth floors
• Handle not included
Handle
• Selected hardwood with clear lacquered finish
• One end rounded and other end equipped with crimped on metal thread to fit
standard floor brush blocks
Whisk Broom
• Made of selected fine broom corn
• Sewn twice for strength
• Plated ring cap

Part Number Description Size Qty.

263-0794 Push Broom 609 mm (24 in) wide 1
263-0796 Broom Handle 23.8 x 1524 mm ( 15/16 x 60 in) 1

Janitorial Equipment
Warranty: Cat Standard Warranty, 6 Months
Janitorial Bucket
• Side pressure wringer
• 7.6 cm (3 in) casters
• Color: yellow
• Size: (L x W x H) 33 x 33 x 68.6 cm (13 x 13 x 27 in)
Mop Heads
• Lay-flat style
• Screw-type mount
• Use with 264-4364 Mop Handle
Mop Handle
• Lay-flat style
• Screw-type mount
• Metal cap

Part Number Description Material Size Qty.

264-4360 Janitorial Bucket rubber 33.1 L (35 qt) capacity 1
264-4361 Rayon Mop Head 4-ply rayon 0.9 kg (32 oz) 1
264-4363 Cotton Mop Head 4-ply cotton 0.68 kg (24 oz) 1
264-4364 Mop Handle hardwood 152.4 cm (60 in) long 1

401
Miscellaneous — Janitorial Products
Trash Can or Waste Receptacle Liners
Warranty: Cat Standard Warranty, 6 Months
• Plastic, super durable trash can liners with superior stretch and tear resistance
• Bottom designed for added strength and greater leak resistance

Part Number Strength Capacity Liner Size Quantity/Roll

263-0885 Medium (10-12 micron) 57 L (15 gal) 60.96 cm x 81.28 cm (24 in x 32 in) 500
263-0886 Heavy (12-14 micron) 125 L (33 gal) 83.82 cm x 99.06 cm (33 in x 39 in) 250
263-0887 Extra-Heavy (15-17 micron) 208 L (55 gal) 91.44 cm x 144.78 cm (36 in x 57 in) 200

Heavy Duty Garbage Bags

Warranty: Cat Standard Warranty, 6 Months
• Made from the highest quality raw materials
• Mineral reinforced to enhance physical properties
• Exceptional strength
• Performance bottom seal resists leakage
• Individually-folded in space-saving packaging

Part Number Size Capacity Color Qty.

270-5346 1092 x 1193.8 cm (43 x 47 in) 212 L (56 gallon) 22.7 kg (50.04 lb) HMW-HDPE Gray 100 bags/case

402
 Miscellaneous — Highway Warning Kit
Triangular Highway Warning Kit
Warranty: Cat Standard Warranty, 6 Months
• Three reflective triangles in a sturdy plastic case
• Compact, fold-flat design
• Durable spring steel base
• Complies with Federal Motor Vehicle Safety Standard Number 1
• Great for day or night visibility

Part Number Description Case Dimensions Size Qty.

262-4862 Triangular Warning Kit (L x W x H): 45.7 x 13 x 13 cm (18 x 5 x 5 in) 43 cm (17 in) 3 per case

403
Miscellaneous — Sprayers
Reusable, Bulk-Liquid Sprayers
Warranty: Cat Standard Warranty, 6 Months
• Used to apply oil and water-based bulk chemicals, such as cleaners, degreasers,
penetrating oils, solvents, or lubricants
• Compressed air sprayers provide a cost effective, reusable alternative to tradi-
tional spray cans (eliminates both storage and disposal concerns)
• Cat compressed air sprayers use a special chemical-resistant internal seal which
virtually eliminates seal replacement problems found in standard sprayers
• Eliminate using flammable and/or environmentally dangerous propellants
• Canisters pressurized with compressed air from any standard air compressor
• Both sprayers constructed with metal canisters (steel or brass), brass nozzles,
and corrosion resistant internal parts
• Steel canister sprayers are used for oil and solvent-based materials while brass
canisters can also be used for water-based materials
• Cannot be used for paint application
• Capacity: 0.9 I (32 oz)

Part Number Description

231-7015 Steel Canister Sprayer
Service Parts
231-7016 Adjustable Tube
231-7017 Seal
231-7018 Nozzle

404
 Miscellaneous — Miscellaneous Products
Poly Coat Paper
Warranty: Cat Standard Warranty, 6 Months
• Used for protecting metal parts and tools, metal sheeting interleaving, protecting
goods on pallets from moisture and debris
• Fifty pound virgin kraft paper with 10 pound polycoating
• Heavy duty protection from water, grease, and oil
• Fits standard dispenser — 3-inch core with plugs that reduce it to 1 inch

Part Number Description Size

263-0891 Poly Coat Paper 914.4 mm x 274.3 m (36 in x 900 feet) roll

Cable Ties and Applicators

Warranty: Cat Standard Warranty, 6 Months
• Used to secure wires, cables, tubes, etc.

Item Installer Part Number For Part Number (below)

1 1U-5228 1S-9593, 8L-8413, 3S-2093, & 6K-0806
1 1U-5227 7K-1181
Package
Item Part Number Bundle Diameter Range Strap Width Quantity Installer
2 1S-9593 1.5 mm to 15.7 mm (.06 in to .62 in) 2.5 mm (0.10 in) 100 1U-5228
2 8L-8413 1.5 mm to 28.4 mm (.06 in to 1.12 in) 3.8 mm (0.15 in) 200 1U-5228
3 3S-2093 1.5 mm to 44.5 mm (.06 in to 1.75 in) 4.9 mm (0.19 in) 500 1U-5228
4 6K-0806 1.5 mm to 101.6 mm (.06 in to 4.00 in) 4.9 mm (0.19 in) 250 1U-5228
5 034-1432 1.5 mm to 203 mm (.06 in to 8.00 in) — 1 —
6 7K-1181 4.8 mm to 101.6 mm (.19 in to 4.00 in) 7.9 mm (0.31 in) 100 1U-5227
7 5P-5148 44.5 mm to 120.6 mm (1.75 in to 4.75 in) 12.7 mm (0.50 in) 100 —
8 6V-7555 44.5 mm to 305 mm (1.75 in to 12.00 in) 12.7 mm (0.50 in) 1 —
Not 240-1678 12.7 mm to 79.4 mm (0.5 in to 3.125 in) 4.8 mm (0.19 in) 1000 —
shown

405
Miscellaneous — Miscellaneous Products
Electric Tie Strap Tightener
Warranty: Manufacturer’s
• Tightens cable ties and cuts off excess when preset tension is attained
• Used with straps, harnesses, and hoses
• Has a comfortable grip and handle for all hand sizes
• Tightens up to 12.7 mm (1/2 in) wide straps
• Weight: 454 g (16 oz)

Part Number Description

4C-5877 Electric Tie Strap Tightener

Tyvek Coveralls
Warranty: Cat Standard Warranty, 6 Months
• White coveralls with zipper front
• For general maintenance work, fiberglass handling, spray painting, and sand
blasting
• Offers splash protection against many liquids
• Lightweight and soft
• Strong, whether wet or dry
• Resistant to abrasion, tears, and punctures
• 100% Polyethylene construction
• Unaffected by most chemicals
• Blocks out 99.9% of all dry particulate down to 0.5 microns

Part Number Size Qty.

267-8539 Large 25
267-8540 Medium 25
267-8541 Small 25
267-8542 X Large 25
267-8543 XX Large 25
267-8544 XXX Large 25
267-8545 XXXX Large 25

406
 Miscellaneous — Miscellaneous Products
Rain Jackets and Pants
Warranty: Manufacturer’s
• Made with a 0.35 mm (.014 in) PVC exterior laminated to a polyester interior [PVC
is a synthetic thermoplastic elastomer (TPE) which provides excellent ozone and
weather resistance]
• Double-lapped heat-welded construction
• Non-conductive hardware
• Meets California Proposition 65
Rain Jacket
• Yellow rain jacket with a detachable hood and two patch pockets
• Full snap front
• Inner storm fly prevents rain and debris from penetrating front opening
• Corduroy collar
• Raglan sleeves for maximum mobility (a raglan sleeve is attached to a garment
body at a 45 degree angle helping it to stretch from neckline to underarm)
• Take-up snaps at cuff
• Back yoke ventilation
Rain Pants
• Yellow rain pants with fly front overall and pockets with flaps
• Fabric/elastic suspender and elastic waist band
• Take-up snaps at ankle

Part Number Chest Size Waist Size Size

Rain Jacket
311-2983 Medium, 101.6-106.68 cm (40-42 in) – –
311-2984 Large, 111.76-116.84 cm (44-46 in) – –
311-2985 XLarge, 121.92-127 cm (48-50 in) – –
Rain Pants
311-2986 – Medium, 91.44-96.52 cm (36-38 in) –
311-2987 – Large, 101.6-106.68 cm (40-42 in) –
311-2988 – XLarge, 111.76-116.84 cm (44-46 in) –
2 Pc Suits
311-2979 – – Medium
311-2980 – – Large
311-2981 – – XLarge

407
Miscellaneous — Miscellaneous Products
Paper Cups
Warranty: Cat Standard Warranty, 6 Months
• Two-piece construction with tightly rolled rim
• Fully wax coated inside and out with a satin finish

Part Number Description Capacity Qty.

263-0884 Paper Cups 238.8 ml (8 oz) 2000 per case

Eye Loupe
Warranty: Cat Standard Warranty, 6 Months
• 25.4 mm (1 in) depth
• 12X power
• Extremely portable

Part Number Description

8S-2257 Loupe

Tie Down Straps

Warranty: Manufacturer’s
• Elastic rubber tie down straps with a hook at each end
• Excellent for general tie down applications such as tarps and covers
• Material: SBR Rubber
Part Number Size
262-9304 8 x 12.6 x 381 mm (.31 x .50 x 15 in)
262-9305 10 x 13 x 533 mm (.39 x .50 x 21 in)

Black Wire
Warranty: Manufacturer’s
• Black annealed mechanics tie wire
• Soft and pliable—makes a perfect tie every time

Part Number Size Material Qty. Length

262-9959 18 gauge Black iron 1 Roll 177 m (580.71 ft)

408
 Miscellaneous — Miscellaneous Products
Creeper
Warranty: Cat Standard Warranty, 6 Months
• Rugged, one-piece, plastic body construction
• Easy-to-clean surface is resistant to solvents, greases, and fuels
• Body-fitting design, contoured to provide optimum comfort
• Low profile, gives maximum workspace but still clears air hoses
• Six pop-in urethane wheels resist corrosion and provide a smooth ride

Part
Number Description Dimensions Wheel Size Clearance
172-0852 Creeper 965 x 445 x 102 mm (38.0 x 17.5 x 4.0 in) 51 mm (2 in) 22.2 mm (0.87 in)
172-0853 Replacement wheel – 51 mm (2 in) –

Funnel Kit
Warranty: Lifetime
Includes:
• - one 1-pint funnel
• - two 1-quart funnels

Part Number Description

268-5809 Funnel Kit

Funnel
Warranty: Lifetime
Part Number Description Length Material
268-5814 Funnel 457.2 mm (18 in) Plastic

409
Miscellaneous — Miscellaneous Products
Sink Filter Sock Kit - 189-5637
Warranty: Cat Standard Warranty, 6 Months
• Sock filter for solvent stands
• Removes oil from washer solvents
• Two Diatomaceous Earth-filled filter bags, one hose

Part Number Description

189-5637 Sink Filter Sock Kit

Digital Stopwatch - 386-3238

Warranty: Cat Standard Warranty, 6 Months
• Large digits for easy viewing
• Start/Stop button on both left and right sides
• 10-hour maximum time setting
• Water Resistant
• Five-year battery

Part Number Description

386-3238 Digital Stopwatch

Python Cinch Straps

Warranty: Caterpillar Standard Warranty, 6 Months
• Nylon with heavy duty nickel plated steel buckle
• Allows hose expansion and contraction without damage
• Easy installation and removal
• UV and Weather Resistant
• Varied lengths from 21 to 29 inches long

Part Number Width Length

391-2683 3.81 mm (1.5 in) 533 mm (21 in)
391-2684 3.81 mm (1.5 in) 635 mm (25 in)
391-2685 3.81 mm (1.5 in) 737 mm (29 in)

410
 Miscellaneous — Miscellaneous Products
Plastic Cover – 463-5569
Warranty: Manufacturers Lifetime Warranty
• Custom cover designed to protect the sensors of autonomous hauling machines
during washing

Part Number Description Length

463-5569 Yellow vinyl cover with 1000 mm (3.25 ft) x 1600 mm
drawstring (5.25 ft) x 1000 mm (3.25 ft)

411
Paint — Cat Paint
Cat Enamel Topcoats
Warranty: Cat Standard Warranty, 6 Months
• Pure, lead free industrial enamel suitable for interior or exterior use on earthmoving, construction and material
handling equipment, trucks, engines, machinery, and metal buildings
• Formulated to produce a finish that sets up in minutes, is tack-free in a few hours, and dries overnight to a hard
film
• Very resistant to fading, chalking, cracking, and chipping
• Can be applied directly to either wood or metal without using a primer

Package
Part Number Description Quantity Size / Type
140-2576 Matterhorn White Paint, High Gloss 12 340 g (12 oz) Aerosol Can
140-2577 Matterhorn White Paint, High Gloss 4 3.8 L (1 Gal) Can
225-6502 Black Paint, High Gloss 4 3.8 L (1 Gal) Can
243-5450 Power Module White Paint, High Gloss 4 3.8 L (1 Gal) Can
243-5451 Power Module White Paint, High Gloss 12 340 g (12 oz) Aerosol Can
249-1815 Power Module White Paint, High Gloss Water Re- 4 3.8 L (1 Gal) Can
ducible 2.8 VOC
4C-4183 Black Paint, Medium Gloss 4 3.8 L (1 Gal) Can
4C-4184 Yellow Paint, High Gloss Fast Drying 4 3.8 L (1 Gal) Can
4C-4185 Hiway Yellow Paint, High Gloss 4 3.8 L (1 Gal) Can
4C-4186 Mojave Brown Paint, Medium Gloss 4 3.8 L (1 Gal) Can
4C-4191 Black Paint, Medium Gloss 1 19 L (5 Gal) Pail
4C-4192 Yellow Paint, High Gloss Fast Drying 1 19 L (5 Gal) Pail
4C-4198 Black Paint, Medium Gloss 12 340 g (12 oz) Aerosol Can
4C-4200 Yellow Paint, High Gloss 12 340 g (12 oz) Aerosol Can
4C-4202 Mojave Brown Paint, Medium Gloss 12 340 g (12 oz) Aerosol Can
4C-4207 Yellow Paint, High Gloss Fast Drying 1 208 L (55 Gal) Drum
4C-5842 Black Paint, Flat 12 340 g (12 oz) Aerosol Can
4C-5843 Black Paint, High Gloss 12 340 g (12 oz) Aerosol Can
4C-6122 Yellow Paint, High Gloss 1 19 L (5 Gal) Pail
4C-6127 Yellow Paint, High Gloss 1 208 L (55 Gal) Drum
4C-6129 Yellow Paint, High Gloss 4 3.8 L (1 Gal) Can
9U-7714 Black Paint, Flat 4 3.8 L (1 Gal) Can

412
 Paint — Cat Paint
Cat Enamel Topcoats (Cont'd.)
Package
Part Number Description Quantity Size / Type
9U-7719 Yellow Paint, High Gloss 3.5 VOC 4 3.8 L (1 Gal) Can
9U-7720 Yellow Paint, High Gloss 3.5 VOC 1 19 L (5 Gal) Pail
9U-7725 Yellow Paint, High Gloss Water Reducible 2.8 VOC 4 3.8 L (1 Gal) Can
9U-7726 Yellow Paint, High Gloss Water Reducible 2.8 VOC 1 19 L (5 Gal) Pail
9U-7731 Black Paint, Medium Gloss Water Reducible 2.8 VOC 4 3.8 L (1 Gal) Can
9U-7946 Bright Beige Paint, Medium Gloss 12 340 g (12 oz) Aerosol Can
9U-7947 Bright Beige Paint, Medium Gloss 4 3.8 L (1 Gal) Can
9U-7949 Dawn Gray, Medium Gloss 4 3.8 L (1 Gal) Can

Cat Black Muffler Paint

Warranty: Cat Standard Warranty, 6 Months
• Formulated for temperatures up to 538°C (1000°F)
• Once properly cured, forms a hard, lasting finish that resists salt spray and will
not chip or peel
• Ideal for use on mufflers, exhaust systems, or any surface exposed to very high
heat

Part Number Description Package Quantity Size / Type

4C-4199 Black Muffler Paint 12 340 g (12 oz) Aerosol Can

Cat Yellow Primer Paint

Warranty: Cat Standard Warranty, 6 Months
• Pure, lead free rust-inhibitive industrial primer sealer with excellent adhesion and
durability
• Specially formulated to resist rusting, peeling, and fading
• Dries tack-free in a few hours and overnight to hard durable coating with excel-
lent weather resistance
• Should be recoated with Cat enamel topcoat paint

Part Package
Number Description Quantity Size / Type
4C-4190 Yellow Primer Paint 4 3.8 L (1 Gal) Can
4C-4197 Yellow Primer Paint 1 19 L (5 Gal) Pail
4C-4205 Yellow Primer Paint 12 340 g (12 oz) Aerosol Can

413
Paints — Paint Thinner
Cat Paint and Primer Thinner
Warranty: Cat Standard Warranty, 6 Months
• Excellent solvent to be used with Cat enamel paint and primer.
• Will not impair the setting-up or tack-free time of the enamel or primer paint.
• Evaporates fast and is less likely to cause sagging and running.
• Because of its high solvency, a relatively small amount of thinner is needed to re-
duce paint to a spray consistency.

Package
Part Number Description Quantity Size / Type
4C-4189 Paint and Primer Thinner 6 3.8 L (1 Gal) Can
4C-4196 Paint and Primer Thinner 1 19 L (5 Gal) Pail

Cat Paint and Primer Thinner with Retarder

Warranty: Cat Standard Warranty, 6 Months
• Excellent solvent to be used with Cat enamel paint and primer.
• Leaves film slowly to provide flow and leveling in hot or dry conditions and on
large equipment where slower drying is desired.
• Evaporates slowly and is less likely to cause dry over-spray.
• Because of its high solvency, a relatively small amount of thinner is needed to re-
duce paint to a spray consistency.

Part Number Description Package Quantity Size / Type

4C-6130 Paint and Primer Thinner 6 3.8 L (1 Gal)
with Retarder Can

414
 Maintenance Chemicals — Soaps and Cleaners
Windshield Cleaner
Warranty: Manufacturer’s
• Good for all types of glass
• Safe for plastics, vinyl, tile, and all hard surfaces
• Non-streaking
• Dries completely
• Does not leave a film
Part Number Size
222-3120 340 g (11.99 oz)

Xtreme Windshield Washer Fluid

Warranty: Manufacturer’s
• Blue-tinted windshield cleaner and de-icer
• Effective to -28.89° C (-20° F)

Part Number Size Package Quantity

271-1648 3.79 L (1 gal) jug 6

Plastic and Rubber Protectant

Warranty: Manufacturer’s
• Contains no silicone
• Formulated with UV inhibitors to protect surface area
• Cleans and protects

Part Number Size

222-3122 340 g (11.99 oz)

Seal Installation Kit

Warranty: Cat Standard Warranty, 6 Months
• N/A in EAME
• Used to clean and lubricate Duo Cone seals prior to installation (developed by
Cat MVC)
• Cleaner dries quickly and leaves no film
• For best results, use cleaner, lubricant, and critical task wipers

415
Maintenance Chemicals — Soaps and Cleaners
Seal Installation Kit (Cont'd.)
Seal
Part Number Description Size Cleaner Seal Lubricant Critical Task Wipers
169-0503 – – 237 ml (8 oz.) 237 ml (8 oz.) 203 x 203 mm (8 x 8 in);
50 per package
Seal Installation Kit consist
169-5418 Seal Lubricant 3.8 L (1 gal) – – –
(1 Gallon)
169-5420 Seal Cleaner (1 Gallon) 3.8 L (1 gal) – – –
265-2256 Low Lint Task Wipers – – –

Air Filter Cleaning Kit

Warranty: Manufacturer’s
• Used to clean air filter elements
• For use in AIRSEPS technology in marine engine applications
• Specially formulated for removing dirt from cotton gauze air filters — prevents
shrinkage or other damage to filter element when used according to manufactur-
er's directions
• Air filter oil greatly increases effectiveness of filter — oil is added to filter after
cleaning
• System includes Formulated Cleaning Solution, Genuine Red Oil, and spray nozzle
• Cleans four 228.6 x 228.6 mm (9 x 9 in) tapered filters or equivalent

Part Number Description Qty.

102-9720 Air Filter Cleaning Kit –

Cabinet Washers and Agitating Tanks

Warranty: Manufacturer’s
Cat Cabinet and Tank Liquid and Cat Cabinet and Tank Powder
• Strong alkaline cleaners that remove dirt, oils, paint, and carbon deposits from
ferrous metal parts
• Clean better than previous Hydrosolv products due to increased levels of surfac-
tants and wetting agents
• Well suited for use in cabinet pressure washers and hot tanks
Cat Aluminum, Safe Cabinet and Tank Powder
• Non-foaming aluminum safe cleaner
• Strong alkaline cleaner that removes dirt, oils, paint, and carbon deposits from
aluminum and ferrous metal parts without discoloration
• Well suited for use in cabinet pressure washers and hot tanks

416
 Maintenance Chemicals — Soaps and Cleaners
Cabinet Washers and Agitating Tanks (Cont'd.)
Part Number EAME Part Number Name Qty. Size
174-6854 N/A Cat Cabinet & Tank Liquid 1 18.9 L (5 gal)
174-6855 185-4593 Cat Cabinet & Tank Liquid 1 208.2 L (55 gal)
174-6856 N/A Cat Cabinet & Tank Powder 1 16 kg (35 lb)
174-6857 N/A Cat Cabinet & Tank Powder 1 181 kg (400 lb)
4C-8648 N/A Cat Aluminum, Safe Cabinet and 1 4 kg (8 lb)
Tank Powder
4C-8650 N/A Cat Aluminum, Safe Cabinet and 1 205 kg (450 lb)
Tank Powder

Pressure Wash
Warranty: Manufacturer’s
Hydrosolv 4165
• Heavy-duty concentrated alkaline cleaner formulated for use in high-pressure
washers
• Provides two weeks rust protection if you do not rinse the part after cleaning

Part EAME Part

Number Number Name Qty. Size
1U-5490 185-4619 Cat HD Pressure Wash 1 18.9 L (5 gal)

Defoamant and Descaleant/Conditioner

Warranty: Manufacturer’s
Hydrosolv defoamant DK100
• Designed to knock down excess foam in hot tanks, cabinet washers, anti-freeze
stills, or any other aqueous foaming solution
Hydrosolv Descaleant and Conditioner
• Can be used as a concentrate to remove scale from pumps, lines and coils
• Should be diluted 50% and used as a water conditioner for high-pressure wash-
ers having automatic water conditioner dispensers

Part EAME Part

Number Number Description Qty. Size
1U-9698 — Hydrosolv Descaleant and 12 1 quart
Conditioner

417
Maintenance Chemicals — Soaps and Cleaners
General Purpose Detergents
Warranty: Cat Standard Warranty, 6 Months
Cat GP Wash
• Economical ready-to-use general-purpose liquid cleaner for shop maintenance,
machine washing, floor washing, etc.
• Provides good detergency for all types of light duty cleaning

EAME Part
Part Number Number Name Qty. Size
174-6860 N/A Cat GP Wash 1 18.9 L (5 gal)
174-6861 N/A Cat GP Wash 1 208.2 L (55 gal)

Chemtool LAC 110 All-Purpose Cleaner Concentrate

Warranty: Manufacturer’s
• Concentrated all-purpose cleaner and degreaser
• USDA-approved for effectiveness and safety
• Bio-degradable, non-phosphorous for all washing applications including homes, RV's, office industry equipment,
automobiles, and boats
Part Number Size
269-8297 18.93 L (5 gal) bucket

Cat Orange Hand Cleaner

Warranty: Cat Standard Warranty, 6 Months
• Excellent hand cleaner for dirty, oily, greasy hands. For exceptionally dirty or
greasy hands, use Hand Cleaner with Pumice.
• Mild citrus smell
• Contains Corn Huskers Lotion, aloe, lanolin and jojoba to help prevent dermatitis
• Contains no petroleum solvents
• Biodegradable
• Works with or without water

Part Number Description Size (1) Qty.

9U-5027 Orange Hand Cleaner (smooth) 3.8 L (1 gal) 4
9U-5029 Orange Hand Cleaner (w/ pumice) 3.8 L (1 gal) 4
9U-5030 Wall Mount Bracket for 1 gal container – 1

1 All 1 gallon jugs come with individual pumps included. 7.5 fl.oz. bottles have self-sealing flip top caps.

418
 Maintenance Chemicals — Soaps and Cleaners
Cat Heavy-Duty Hand Cleaners
Warranty: Cat Standard Warranty, 6 Months
• Heavy-duty hand cleaner for oil, grease, tar, grime, soil, resins, printer's ink, ep-
oxies, paint, and cements
• Works faster than standard orange hand cleaner
• Fine ground pumice provides a deep scrubbing action to remove difficult grease
and grime
• Pleasant scent with lanolin and aloe
• Will not irritate most hands and does not leave a greasy residue

Part Number Description Size

191-6310 Heavy-Duty Hand Cleaner 15 oz

Cat Battery Cleaner

Warranty: Cat Standard Warranty, 6 Months
• Dissolves and neutralizes battery acid and harmful corrosion from battery parts,
terminals, cables, hold-downs, and boxes
• Recommended for construction and industrial equipment batteries
• Can be used on automobile, marine, and industrial batteries

Part Number Size

222-3111 340 g (11.99 oz)

Cat Battery Saver

Warranty: Cat Standard Warranty, 6 Months
• Creates a protective coating, giving maximum battery protection
• Recommended for use on all battery installations
• Keeps dirt and other contaminants from interfering with the flow of power
• Prolongs battery, cable, and clamp life

Part Number Size

222-3112 340 g (11.99 oz)

419
Maintenance Chemicals — Soaps and Cleaners
Cat Mineral Spirits
Warranty: Cat Standard Warranty, 6 Months
• For use in solvent stands, immersion tanks, and manual cleaning equipment
• Can be used with brush, rags, or spray
• Has minimum flash point of 96°C (205°F) COC
• High quality product with excellent solvency and is capable of being recycled in-
definitely through a solvent reclaiming still
• If used in spray equipment, follow recommendations of spray equipment
manufacturer
Part Number Size
4C-6796 18.79 L (5 Gal)
4C-6797 208 L (55 Gal)

420
 Maintenance Chemicals — Adhesives and Sealants
Clear Adhesive Sealant
Warranty: Manufacturer’s
• Holds seals in place during assembly
• Used for Single Cylinder Oil Test Engines (SCOTE)

Part Number Size

1Y-3904 20 ml (0.68 fl oz) syringe

Heat Sink Compound

Warranty: Manufacturer’s
• High thermal conductivity
• Does not break down
• No migration
• Protects high current carrying semi-conductors, power transistors, diodes, and
SCR's
Part Number EAME Part Number Size
5P-8937 186-1529 142 g (5.01 oz)

High Temperature Anti-Seize

Warranty: Manufacturer’s
• Allows easy loosening of joined parts in high temperature environments
• Matches Caterpillar production specifications
• Heavy-duty

Part Number Description Size Qty.

5P-3931 Anti-seize Lubricant 1.13 kg (40 oz) 12

Cat Manifold Sealer

Warranty: Cat Standard Warranty, 6 Months
• Seals and bonds at temperatures up to 1093°C (2000°F)
• Seals male/female joints in segmented exhaust manifolds

Part Number Size Qty.

2P-2333 473 ml (15.99 fl oz) 1

421
Maintenance Chemicals — Adhesives and Sealants
Window Bonding Adhesives and Tooling
Warranty: Manufacturer’s
Part Number Description Size
9U-6919 Butyl Sealant 3/8 inch x 1/8 inch x 50 foot roll
Primer for polycarbonate:
121-3911 Window Primer 250 ml (8.5 oz) tube
Primer for ABS plastic:
166-1359 ABS Primer 250 ml (8.5 oz) tube

To Bond Large Windows

Warranty: Manufacturer’s
Clean the area to be repaired with brake cleaner. Use window primer to prepare the area. Wait 10 minutes, then
apply window adhesive to the area.
See SEHS9824-01 Special Instruction (6/99) for detailed instructions.
Part Number EAME Part Number Description Size
To reseal windows with weather-strip:
121-3908 187-4856 Window Adhesive 310 ml (10.5 oz) tube
121-3911 121-3911 Window Primer 250 ml (8.5 oz) tube

Epoxy Adhesive, Nozzle Mixer, Applicator (Model 3500)

Model: 3500
Warranty: Manufacturer’s
• Fast cure adhesive
• 30 minute handling strength

Shear
Part Number Description Strength Pot Life Mix Ratio Size
143-9508 Epoxy Adhesive 2500 PSI 9 minutes 1:1 48.2 g (1.70 oz)
143-9509 Nozzle Mixer – – – –
143-9510 Applicator – – – –
143-9511 Plunger – – – –

422
 Maintenance Chemicals — Lubricants
CT2 Air Tool Oil/Lubricant
Warranty: Manufacturer’s
• Lubricates and protects piston-type or rotary pneumatic air tools
• Prevents rust/corrosion

Part Number Size Package Quantity

269-1944 0.95 L (1 qt) bottle 12

Cat Heavy Duty Penetrating Oil

Warranty: Cat Standard Warranty, 6 Months
• Quickly loosens stubborn parts—frozen nuts, bolts, pipe fittings, heat valves, roll-
ing pins, press fit parts, and key ways
• Heavy-duty
• Enhanced penetration action

Part Number Size

222-3115 340 g (11.99 oz)

Cat Dry Film Lubricant

Warranty: Cat Standard Warranty, 6 Months
• Dry, low-friction lubricant
• Does not attract dust or dirt
• For use with sliding surfaces, such as motor grader blades circles and backhoe
loader extended stick and side shift mechanisms
Part Number Size
242-6990 340 g (11.99 oz)

Cat Chain and Cable Lubricant

Warranty: Cat Standard Warranty, 6 Months
• Good corrosion and rust resistance
• Reduces and protects chain against wear—increases life of chain and cable
• Foaming action that helps cover all surfaces
• Fast penetrating action
• Resists high temperature breakdown

423
Maintenance Chemicals — Lubricants
Cat Chain and Cable Lubricant (Cont'd.)
Part Number Size Qty.
222-3110 340 g (12 fl oz) 12

Cat Camshaft and Follower Lubricant

Warranty: Cat Standard Warranty, 6 Months
• Prevents galling on camshafts with slipper type followers
• Apply during engine buildup to provide necessary lubrication at startup

Part Number EAME Part Number Size Qty.

8T-2998 185-4758 236 ml (7.98 fl oz) 12

Cat Silicone Lubricant

Warranty: Cat Standard Warranty, 6 Months
• Silicone grease
• Extreme temperature resistance
• Lubricant for rubber boots on Cat flexible drive couplings on marine engines
• Not for use on silicone O-rings (yellow or white) or hoses

Part Number EAME Part Number Size Qty.

5N-5561 186-1528 340 g (11.99 oz) 10

Cat Air Conditioning Pump Lubricants—PAG Oil

Warranty: Cat Standard Warranty, 6 Months
• Specially formulated lubricants for use with R-134a Refrigerants
Part
Number Size Qty. Oil Type Viscocity
4C-2959 250 ml (8.45 fl oz) 1 Polyalkylene glycol oil for San- Low Viscosity refrigerant oil
den compressors for R-134a
4C-2960 250 ml (8.45 fl oz) 1 Polyester oil ISO Viscosity refrigerant oil
for R-134a
9U-7551 250 ml (8.45 fl oz) 1 Polyalkylene glycol oil High Viscosity refrigerant oil
for R-134a

424
 Maintenance Chemicals — Lubricants
Rubber Lubricant
Warranty: Manufacturer’s
• Lubricates rubber to metal during tire mounting and dismounting
• Helps prevent rim corrosion and damage to bead surfaces
• Renews appearance of rubber and vinyl products
• Prevents squeaks in rubber parts

Part Number Size

5P-3975 3.79 L (1 gal)

Cat P-80 Assembly Lubricant

Warranty: Cat Standard Warranty, 6 Months
• Specially formulated liquid that lubricates rubber so it is easy to install, remove,
or otherwise manipulate
• Unique feature—its ability to provide temporary lubrication (Once the work with
the rubber is complete, emulsion rubber lubricant disappears and surfaces return
to original condition.)
• Provides high degree of lubricity while wet; stays wet long enough to complete
the work, then it's gone; contains no silicones or other persistent ingredients so
lubricity goes away completely
• Lubricated parts won't crumble, tear, or lose their elasticity; lubricant does not
harm glass, metal, wood, or other materials
• Keep emulsion rubber lubricant out of freezing or near-freezing temperatures. In
colder climates be especially careful not to leave emulsion rubber lubricant in
any unheated area for lengthy periods.

Part Number Size

207-1601 1 L (0.25 gal)

Cat Tire Lubricant

Warranty: Cat Standard Warranty, 6 Months
• Contains no soaps
• Leaves no residue — will not rust rims
• Helps seal tire to rim without bonding
• Reduces bead damage
• Nontoxic, odorless

Part Number Description Size

139-2398 Lubricant 3.8 L (1 gal)

425
Maintenance Chemicals — Metal Working
Cat 119 Cutting Oil
Warranty: Caterpillar Standard Warranty, 6 Months
• Straight cutting oil for machining ferrous metal
• Drilling, tapping, honing
• Contains chlorine and sulfur for optimum tool life and finish
• Compounded for easy removal with no troublesome residues

Part Number Qty. Size

1U-8805 4 3.8 L (1 gal)

Cat 250 Grinding Fluid

Warranty: Caterpillar Standard Warranty, 6 Months
• Water soluble cutting oil, grinding fluid and coolant
• Drilling, tapping, honing non-ferrous metals
• Grinding on crankshafts, etc.
• Compounded for easy removal with no troublesome residues
• Formulated with built-in biocide to control bacteria that cause odors and
dermatitis

Part Number Qty. Size

1U-8808 4 3.8 L (1 gal)

DYKEM Hi Spot Bluing Paste

Warranty: Manufacturer’s
• Intensely blue, soft, uniform paste that spreads easily and evenly to show high
spots on bearings
• Used on flat bearing surfaces of lathes, planers, and milling machines

Part Number Size Package Quantity

280-1555 15.59 g (0.55 oz) tube 36

426
 Maintenance Chemicals — Testing Products
Oil Dyes
Warranty: Manufacturer’s
• Highly concentrated oil soluble dyes for adding color to lubricating oils, transmis-
sion oils, hydraulic oils and fuels
• Visible at concentrations of 1 part in 10,000 or more. It only takes 30 ml (1 oz) to
color 473 l (125 gal) of light color oil
• Use it to color code oils to prevent mixups
• Use it to identify the source of leaks when more than one source is possible
• Hint: For sumps with dark colored oil, use oil dyes which are visible in black light
(ultraviolet) such as 1U-5572 through 1U-5575

Part Number Color Size

9U-5031 Red 240 ml (8.12 fl oz)
9U-5032 Blue 240 ml (8.12 fl oz)

Aerosol Liquid Penetrant and Developer

Warranty: Manufacturer’s
• Checks for surface cracks in ferrous and non-ferrous parts with regular light
• Contains no chlorine or sulphur bearing solvent
• Conforms to MIL-1-25135, RDT F-3-6T standard and other military specifications
• Simple and easy to use

Cross Reference Chart for Liquid Penetrant Kit

Cat/Crown Fault Magnaflux Spot Sherwin Dubl-
Description Finder Check Turco By Check Check Met-L- Check Min. Ship. Qty.
Penetrant, Aerosol 4C-4804 SKL-S By Check DP-40 VP-31 12 each
Developer, Aerosol 4C-4805 SKD-NF By Check D-100 D-70 12 each

427
Maintenance Chemicals — Testing Products
UV Visible Dyes for Leak Detection
Warranty: Manufacturer’s
• Detects leaks in light or dark oils, fuels, water solutions

Part
Number Description Size Dosage
To detect oil leaks in engines, transmission, hydraulic systems, etc.
1U-5572 Oil Glo 22 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 7.58 L (2 gal) of oil
1U-5573 Oil Glo 22 Additive 0.47 L (1 pt) bottle 28.4 g (1 oz) per 7.58 L (2 gal) of oil
To detect fuel leaks or suspected fuel dilution
1U-5574 Gas Glo 32 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 37.9 L (10 gal) of gasoline or diesel fuel
1U-5575 Gas Glo 32 Additive 0.47 L (1 pt) bottle 28.4 g (1 oz) per 37.9 L (10 gal) of gasoline or diesel fuel
To detect cooling system leaks, use:
1U-5576 Water Glo 23 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 151.6 L (40 gal) of water
1U-5577 Water Glo 23 Additive 0.47 L (1 pt) bottle 28.4 g (1 oz) per 151.6 L (40 gal) of water

428
 Maintenance Chemicals — Testing Products
UV Flashlight Kit - 459-0184
Warranty: Manufacturer, one year
• OPTI-LUX 365 UV-A LED Inspection Flashlight
• 10,000 µW/cm2 of UV-A (365 nm) light at 38 cm (15 in)
• Instant on at full intensity
• Each charge provides four hours of continuous operation
• 100,000-hour LED service life
• Rugged anodized aluminum body
• Kit also contains:
– One pair UVS-30 absorbing Cat safety glasses with ANSI,
AUS/NZ, CE, CSA certifications
– Spare battery
– Global charger set
♦ 100-120v
♦ 230v EU/CE
♦ 240v AUS/CE
♦ 230v UK/CE
– Lanyard
– Holster
– Storage case
• Weight 130 g (4.6 oz)
• Meets ASTM UV-A intensity and wavelength specifications
for FPI and MPI
• CE marked

Leak Detection Kit

Warranty: Manufacturer’s
• Handheld
• An anodized aluminum lamp housing
• Makes it easier and quicker to detect leaks in oil, fuel and cooling systems
• Additives, available separately, can be put in the suspect system and the leak
point will show in the black light (ultraviolet light)
• Instructions come with the kit
• Also works with fluorescent penetrant kit
• Optional light cover, made of heat-resistant neoprene rubber, helps protect the
user from possible burn injury, and also provides protection against mechanical
shock damage

Part Number Description

1U-5566 Black Light 120 Volt Kit
280-8961 Black Light 240 Volt Kit

429
Maintenance Chemicals — Testing Products
Leak Detection Kit (Cont'd.)
Part Number Description
Service Parts
1U-5567 Black Light Filter
1U-5568 110V, 150 Watt Spot Bulb
Optional Items
280-8144 120V/100 Watt Ultraviolet Spot Bulb, 30 mm Base, Average Intensity 7000 milliwatts
280-8147 120V/100 Watt Ultraviolet Spot Bulb, 26 mm Base, Average Intensity 7000 milliwatts
280-8148 240V/150 Watt Ultraviolet Spot Bulb, Average Intensity 7000 milliwatts

Cat Calibration Fluid

Warranty: Cat Standard Warranty, 6 Months
• Fuel injection test benches
• Pop Testers

Part Number Size

6V-6067 208 L (55 US gal)
6V-6068 18.9 L (5 US gal)

Gear Marking Compound - 381-0022

Cat Standard Warranty, 6 Months
• Used to mark gears during rebuild or service
• Mineral oil and iron oxide powder mixture
• NLGI #4 consistency

Part Number Volume

381-0022 118 mL (4 oz.)

430
 Maintenance Chemicals — Rust Preventatives
Cat Rust Preventive Oil 450
Warranty: Caterpillar Standard Warranty, 6 Months
• Water displacing rust preventive oil is more strongly attracted to bare metal than
water
• Apply by dipping, brushing, or spraying
• Leaves a long lasting, rust preventive film that protects against rusting for a year
in covered storage conditions
• Should be protected from dirt and dust accumulation to prolong its effectiveness

Part Number Qty. Size

1U-8809 4 473 ml (16 oz)

Cat Rust Preventive Oil 4A

Warranty: Caterpillar Standard Warranty, 6 Months
• Long lasting, heavy-duty waxy film
• Apply by dipping, brushing, or spraying
• Leaves a long lasting, rust preventive film that protects from damage by outside
condensation, rainfall, etc. up to a year
• Must be removed with solvent or hot alkaline cleaner

Part Number Qty. Size

1U-8801 4 3.8 L (1 gal)

V.C.I. Oil
Warranty: Manufacturer’s
Reference
SEHS9031 Special Instructions
• Use for storing vehicles and vehicle components such as engines and transmis-
sions for periods of up to one year
• Protects all ferrous parts when maintained at the proper concentration in a
closed container
• Has a vapor phase that is more strongly attracted to bare ferrous metals than
water
• Will continue to perform indefinitely as long as it stays sealed in the compartment
• Meets Mil-P-46002A

Part Number Qty. Size

4C-6792 12 1 L (0.25 gal)
4C-6794 1 18.93 L (5 gal)

431
Maintenance Chemicals — Miscellaneous Chemicals
Ether Cylinder
Warranty: Manufacturer’s
• Cold weather starting aid
• Heavy-duty construction
• Quick starts from -45.5°C (-50°F)
• Easy to install, hand tighten
• 7.6 cm (3 in) diameter
• For measured shot systems

Part Number Qty. Size

7X-1062 12 21 oz (595 g)
7N-0296 12 18 oz (510 g)
130-8414 12 8 oz (226 g)

CT2 Antifreeze and Rust Guard

Warranty: Manufacturer’s
• Provides corrosion protection and prevention for air breaking system
• Anti-static and anti-fungal
• Also used in pneumatic hose lines

Part Number Size Package Quantity

272-5745 0.95 L (1 qt) bottle 12

Anti-Spatter Compound
Warranty: Manufacturer’s
• Protects tips on MIG welding torches from weld spatter

Part Number Qty. Size

4C-4217 12 207 ml (7 fl oz)

432
 Maintenance Chemicals — Miscellaneous Chemicals
Thermally Conductive RTV Kit
Warranty: Manufacturer’s
• Increases thermal conductivity between diode and aluminum heat sink assembly
on rotating field of power generator
• High thermal conductivity and electrical isolation
• Conformable, cure in place thermal interface
• Storage at or near freezing (0° C (32° F) prolongs product life
• Also see heat sink compound

Part Number Description Shelf Life

4C-6715 RTV Kit 6 months at 24º C (75º F)

Cat Vacuum Pump Oil

Warranty: Caterpillar Standard Warranty, 6 Months
• Approved for all Cat vacuum pumps
• All vacuum pump suppliers recommend changing the vacuum pump oil after
every pump down to prevent contamination of the next system to be serviced

Part Number Qty. Size

1U-9763 12 0.95 L (1 qt)

UPS 250 Vacuum Pump Oil

Warranty: Manufacturer’s
• An annual service schedule for UPS 250 vacuum pump is recommended

Part Number Capacity of Pump (1) Size

190-8487 0.7 L (23.67 oz) 1 L (33.81 oz)

1 Caterpillar UPS Vacuum Pumps have a capacity of .7 L and should not be filled beyond sight gauge fill line. Failure to follow this instruc-
tion will cause oil to leak from pump. (PEHJ0152)

433
Maintenance Chemicals — Miscellaneous Chemicals
Dielectric Tune-Up Grease
Warranty: Manufacturer’s
• Silicone grease — lubricate open electrical connections
• Prevents fusing of spark plug boots

Part Number Size

151-1340 9 ml (0.30 fl oz)

Cat Rust Preventative

Warranty: Cat Standard Warranty, 6 Months
• Provides a hard film surface with good corrosion and rust resistance
• Protects equipment stored outside
• Helps protect equipment used around salty environments
• Provides protection in humid environments

Part Number Size

222-3121 473 ml (16 oz)

Cat Silicone Fluid

Warranty: Cat Standard Warranty, 6 Months
• For fan drive assemblies and clutches with viscous fluid drives
Part Number Size Used in
4C-6508 300 ml (10.14 fl oz) 3600 Visconic Damper

434
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.

030-4606 ................... 283 143-9511 ................... 422 161-3983 ................ 58, 61 178-1628 ................... 279
034-1432 ................... 405 144-4674 .....................26 161-3985 .....................61 178-2212 ................... 191
068-0710 ................... 284 146-2728 ...............18, 182 162-5791 ................... 372 178-2213 ................... 191
090-9019 ................... 283 147-6456 ................... 320 162-7804 ................... 147 178-7635 ................... 278
093-1321 ................... 285 148-5675 ................... 192 162-8716 ....... 13, 23, 57, 62 179-3571 ................... 278
093-1322 ................... 285 148-5677 ................... 192 162-8718 ................... 137 179-7043 ................... 313
093-1323 ................... 285 150-1197 ................... 213 163-0798 ................... 356 179-7046 ................... 313
096-3829 ................... 285 150-1244 ............. 212–213 163-0799 ................... 356 179-7047 ................... 314
096-6073 ................... 285 150-1246 ................... 213 165-3945 ................... 217 179-7048 ............. 313–314
0V-0455.......................49 150-1248 ................... 213 165-3946 ................... 217 179-7049 ............. 313–315
102-9720 ................... 416 150-1250 ................... 213 165-3947 ................... 217 179-7050 ............. 313–314
121-3908 ................... 422 150-1251 ................... 213 165-3977 ................... 161 179-7053 ................... 314
121-3911 ................... 422 150-1252 ................... 213 166-1359 ................... 422 179-7054 ................... 315
124-0662 .....................93 150-1578 ................... 354 168-0383 ....... 12, 16, 57, 62 179-7056 ................... 315
127-1909 ................... 297 150-1579 ................... 355 168-7955 .....................95 179-7058 ................... 315
127-2277 .....................37 150-5431 ............. 215, 218 168-8395 ................... 107 185-3630 ...... 19–24, 26, 29,
127-2278 .....................37 151-0968 ................... 116 169-0503 ................... 416 43, 182
127-2279 .....................37 151-1340 ................... 434 169-0782 ................... 107 185-4593 ................... 417
127-2280 .....................37 151-8101 ................... 215 169-5418 ................... 416 185-4619 ................... 417
128-8824 .....................50 151-8102 ................... 215 169-5420 ................... 416 185-4758 ................... 424
128-8825 .....................50 152-1058 ................... 103 169-7372 ............. 365–366 186-1528 ................... 424
129-1063 ................... 181 152-4942 .....................27 169-7373 ............. 365–366 186-1529 ................... 421
129-4552 ................... 107 152-7997 ................... 193 169-8373 ................... 366 187-2718 .....................43
129-4553 ................... 107 154-9315 ................... 255 170-8604 ................... 379 187-4856 ................... 422
130-8414 ................... 432 154-9316 ................... 255 170-8605 ................... 379 188-2143 ................... 294
132-8743 ...............96, 104 154-9317 ................... 255 172-0852 ................... 409 188-2145 ................... 294
133-8877 .....................26 154-9318 ................... 255 172-0853 ................... 409 188-2147 ................... 294
135-7628 ................... 206 154-9319 ................... 255 174-6854 ................... 417 188-2163 ................... 294
136-1452 ................... 153 155-3046 ................... 108 174-6855 ................... 417 188-2167 ................... 294
136-5189 ................... 104 156-0927 ................... 132 174-6856 ................... 417 188-2170 ................... 294
136-5190 ...............96, 104 156-0930 ................... 131 174-6857 ................... 417 189-5637 ................... 410
138-3856 ................... 384 156-0931 ................... 131 174-6860 ................... 418 190-1668 ................... 144
138-4523 ................... 215 156-0932 ................... 131 174-6861 ................... 418 190-1669 ................... 144
138-4524 ................... 215 156-2568 ................... 139 174-8900 ................... 227 190-1670 ................... 144
138-4528 ................... 215 156-8166 ............. 256, 277 174-8901 ................... 227 190-5622 ................... 144
138-4529 ................... 215 157-0674 .....................23 174-8902 ................... 227 190-5623 ................... 144
138-4530 ................... 215 157-2264 ................... 181 174-8903 ................... 227 190-8487 ................... 433
138-4534 ................... 215 157-2266 ................... 181 174-8904 ................... 228 190-9792 ................... 388
138-4535 ................... 215 157-2268 ................... 181 174-8905 ................... 228 191-6310 ................... 419
138-4536 ................... 215 157-2269 ................... 181 174-8906 ................... 228 193-0071 ................... 352
139-2398 ................... 425 157-2273 ................... 181 174-8907 ................... 228 193-0766 ................... 352
139-2788 ................... 319 157-2276 ................... 181 174-8908 ................... 228 194-3480 ................ 65, 98
139-2789 ................... 319 157-2278 ................... 181 174-8909 ................... 228 194-3483 ................ 65, 98
140-2576 ................... 412 158-8723 ................... 113 174-8910 ................... 228 194-3488 ................ 65, 98
140-2577 ................... 412 159-2833 ............. 105, 110 174-8911 ................... 228 194-3490 ................ 65, 98
140-8780 ................... 107 159-5155 ................... 383 174-9803 ................... 190 194-3492 ................ 65, 98
140-9921 ................... 279 159-5160 ................... 383 175-6797 ................... 103 194-3494 .....................65
141-1655 ................... 309 160-0772 ................... 178 175-7546 ................... 169 194-3495 .....................65
141-7250 ................... 278 160-0774 ................... 178 176-1691 ................... 279 194-3496 .....................65
143-2459 ................... 159 160-0775 ................... 179 177-0364 ................... 169 194-3497 .....................65
143-2460 ................... 159 160-1749 ................... 255 177-0365 ................... 169 194-3498 .....................65
143-9508 ................... 422 160-5119 ................... 163 177-0366 ................... 169 194-3499 .....................65
143-9509 ................... 422 160-6389 ........... 13, 58, 61 177-0367 ................... 169 194-3500 .....................65
143-9510 ................... 422 160-6390 ...............61, 137 177-9343 ................... 366 194-3505 ...............72, 101
435
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
194-3506 ...............72, 101 195-4609 ................... 177 1P-2382..................... 139 1P-3039..................... 250
194-3510 ...............72, 101 196-1168 ................... 159 1P-2851.......................51 1P-3040..................... 250
194-3511 ...............72, 101 196-1331 ................... 159 1P-2852.......................51 1P-3041............... 250, 277
194-3512 ...............72, 101 198-9142 ................... 175 1P-2853.......................51 1P-3042............... 250, 277
194-3513 ...............72, 101 198-9143 ................... 175 1P-2854.......................51 1P-3043............... 250, 276
194-3514 ...............72, 101 198-9144 ................... 175 1P-2856.......................51 1P-3044............... 250, 276
194-3515 ...............72, 101 198-9145 ................... 175 1P-2874..................... 181 1P-3045..................... 276
194-3516 ...............72, 101 199-3947 ................... 250 1P-2979..................... 253 1P-3047......... 251–252, 257
194-3517 ...............72, 101 199-6149 ...............71, 100 1P-2980..................... 253 1P-3048......... 251–252, 257
194-3518 ................ 69, 97 199-6150 .......... 23, 71, 100 1P-2981..................... 253 1P-3050..................... 252
194-3519 ................ 69, 97 199-6152 ...............71, 101 1P-2982..................... 253 1P-3070..................... 251
194-3521 ................ 69, 97 199-6153 ...............71, 101 1P-2983..................... 253 1P-3093..................... 277
194-3522 ................ 69, 97 199-6154 ...... 21, 23, 25, 71, 1P-2984..................... 253 1P-3095..................... 277
194-3523 ................ 69, 97 101 1P-2985..................... 253 1P-3501.......................37
194-3527 ................ 69, 97 199-6156 ................ 19, 71 1P-2986..................... 253 1P-3502.......................37
194-3528 ................ 69, 97 199-9019 ................ 19, 66 1P-2987..................... 253 1P-3503.......................37
194-3529 ................ 69, 97 199-9023 .....................66 1P-2988..................... 253 1P-3504.......................37
194-3530 ................ 69, 97 199-9025 .....................66 1P-2989..................... 253 1P-3505.......................37
194-3531 ................... 109 199-9026 ................ 26, 66 1P-2990..................... 253 1P-3506.................. 37–38
194-3532 ................... 109 199-9027 .....................66 1P-2991..................... 253 1P-3507.................. 37–38
194-3533 ................... 109 199-9028 .....................66 1P-2992..................... 253 1P-3508.................. 37–38
194-3534 ................... 109 199-9029 ................ 26, 66 1P-2993..................... 253 1P-3509.................. 37–38
194-3535 .......... 21, 26, 109 199-9030 .....................66 1P-2994..................... 253 1P-3510.................. 37–38
194-3536 ................... 109 199-9031 .....................66 1P-2995..................... 253 1P-3511.................. 37–38
194-3537 ................... 109 199-9032 ................ 26, 66 1P-2996..................... 253 1P-3512.................. 37–38
194-3538 .......... 21, 26, 109 199-9033 .....................66 1P-2997..................... 253 1P-3513.................. 37–38
194-3539 ................... 109 199-9034 ................ 66, 98 1P-2998............... 253–254 1P-3514.................. 37–38
194-3540 ................... 109 199-9035 ........... 26, 66, 98 1P-3000..................... 253 1P-3515.......................37
194-3541 ................... 107 1A-2209 ......................63 1P-3007..................... 249 1P-3566.................47, 106
194-3542 ................... 107 1B-4657 .................... 111 1P-3008..................... 249 1P-5559.......................48
194-3543 ................... 107 1B-5170 .................... 284 1P-3010..................... 249 1P-5571..................... 206
194-3544 ................... 107 1B-5174 .................... 284 1P-3012..................... 249 1P-5572..................... 206
194-3545 ................... 107 1B-7810 .................... 158 1P-3014..................... 249 1P-5573..................... 206
194-3546 ................... 107 1B-9925 .................... 259 1P-3015..................... 249 1P-5574..................... 206
194-3547 ................... 107 1F-1159 .................. 14, 17 1P-3016..................... 249 1P-7421..................... 250
194-3548 ................... 107 1F-1161 .................. 14, 17 1P-3017..................... 249 1P-7422..................... 252
194-3549 ................... 107 1H-8134 ......................63 1P-3018..................... 249 1P-7460..................... 141
194-3552 ................... 168 1J-9671..................... 283 1P-3019..................... 249 1S-0253............. 13, 29–30
194-3553 ................... 162 1N-5998 .................... 283 1P-3021..................... 250 1S-0254......... 13, 17, 28, 30
194-3556 ................... 162 1N-5999 .................... 283 1P-3022..................... 250 1S-0257............ 14, 17, 158
194-3558 ................... 101 1P-0545.................. 20, 23 1P-3023..................... 250 1S-0258............ 14, 17, 158
194-3559 ................... 101 1P-0551.......................43 1P-3024..................... 250 1S-0259........ 12, 16, 19–20,
194-3560 ................... 145 1P-0810..................... 389 1P-3025............... 250, 277 56, 89
194-3562 ................... 101 1P-0853..................... 114 1P-3026..................... 250 1S-2475..................... 182
194-3563 ................... 101 1P-1853..................... 152 1P-3027............... 250, 277 1S-9593..................... 405
194-3564 ................... 101 1P-1854..................... 152 1P-3028..................... 250 1U-5227 .................... 405
194-3565 .......... 21, 24, 101 1P-1855..................... 152 1P-3029............... 250, 277 1U-5228 .................... 405
194-3566 ................... 101 1P-1856..................... 152 1P-3030..................... 250 1U-5386 .............. 245–246
194-3567 ................... 101 1P-1857..................... 152 1P-3031............... 250, 277 1U-5387 .............. 245–246
194-3574 ................ 18, 65 1P-1858..................... 152 1P-3032..................... 251 1U-5388 .............. 245–246
194-3576 ................ 18, 72 1P-1859..................... 152 1P-3033............... 250, 277 1U-5389 .............. 245–246
194-3578 ................ 18, 69 1P-1860..................... 152 1P-3034..................... 250 1U-5390 .............. 245–246
194-3584 ...............18, 109 1P-1861..................... 152 1P-3035..................... 250 1U-5391 .............. 245–246
194-3585 ...............19, 107 1P-1862..................... 152 1P-3036............... 250, 277 1U-5392 .............. 245–246
194-4935 .....................38 1P-1863..................... 152 1P-3037..................... 250 1U-5393 .............. 245–246
194-4944 .....................61 1P-1864..................... 152 1P-3038............... 250, 277 1U-5394 .............. 245–246
436
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
1U-5395 .............. 245–246 1U-5599 .................... 243 1U-5687 .................... 244 1U-6786 .................... 230
1U-5396 .............. 245–246 1U-5600 .................... 243 1U-5688 .............. 244, 270 1U-6787 .................... 230
1U-5397 .............. 245–246 1U-5601 .................... 243 1U-5689 .................... 244 1U-6788 .................... 227
1U-5398 .............. 245–246 1U-5602 .................... 243 1U-5690 ........ 244, 269, 275 1U-6789 .................... 227
1U-5399 .................... 246 1U-5603 .............. 243, 274 1U-5691 .............. 244, 270 1U-6790 .................... 227
1U-5400 .................... 246 1U-5604 .................... 243 1U-5692 .................... 244 1U-6791 .................... 227
1U-5401 .................... 246 1U-5605 .................... 243 1U-5693 .................... 244 1U-6792 .................... 227
1U-5402 .................... 246 1U-5606 .............. 243, 277 1U-5694 .............. 244, 269 1U-6793 .................... 227
1U-5403 .................... 246 1U-5607 .............. 243, 274 1U-5695 .................... 244 1U-6794 .................... 227
1U-5404 .................... 246 1U-5608 .................... 243 1U-5696 .............. 244, 275 1U-6796 .................... 227
1U-5405 .................... 246 1U-5609 .................... 243 1U-5697 .................... 244 1U-6809 .................... 228
1U-5406 .................... 246 1U-5610 .............. 243, 277 1U-5698 .............. 244, 268 1U-6810 .................... 228
1U-5407 .................... 246 1U-5611 .............. 243, 274 1U-5699 .............. 244, 277 1U-6811 .................... 228
1U-5408 .................... 246 1U-5612 .................... 243 1U-5700 .............. 244, 275 1U-6812 .................... 238
1U-5409 .................... 246 1U-5613 .................... 243 1U-5701 .................... 244 1U-6813 .................... 238
1U-5410 .................... 246 1U-5614 .............. 243, 277 1U-5702 ........ 244, 268–269 1U-6814 .................... 238
1U-5411 .................... 246 1U-5615 .............. 243, 275 1U-5703 .............. 244, 277 1U-6815 .................... 238
1U-5412 .................... 246 1U-5616 .................... 243 1U-5705 .................... 244 1U-6816 .................... 238
1U-5413 .................... 246 1U-5617 .................... 243 1U-5707 .............. 244, 276 1U-6817 .................... 231
1U-5414 .................... 246 1U-5620 .................... 245 1U-5709 .................... 244 1U-6818 .................... 231
1U-5432 .............. 370–371 1U-5621 .............. 244–245 1U-5711 .............. 244, 276 1U-6819 .................... 231
1U-5490 .................... 417 1U-5622 .............. 244–245 1U-5713 .................... 244 1U-6820 .................... 237
1U-5512 .................... 232 1U-5623 .............. 244–245 1U-5714 .................... 243 1U-6821 .................... 237
1U-5513 .................... 232 1U-5624 .............. 244–245 1U-5715 ......................93 1U-6822 .................... 237
1U-5514 .................... 232 1U-5625 .............. 244–245 1U-5718 .................... 366 1U-6823 .................... 237
1U-5515 .................... 232 1U-5626 .............. 244–245 1U-5719 .................... 366 1U-6824 .................... 237
1U-5516 .................... 212 1U-5627 .............. 244–245 1U-5732 ......................52 1U-6825 .................... 237
1U-5517 .................... 212 1U-5628 .............. 244–245 1U-5734 ................. 36, 53 1U-6826 .................... 237
1U-5518 ........ 211–212, 215 1U-5629 .............. 244–245 1U-5735 ......................53 1U-6827 .................... 216
1U-5519 ........ 211–213, 215 1U-5630 ...... 244–245, 269– 1U-5889 .................... 243 1U-6828 .................... 216
1U-5520 ........ 211–213, 215 270 1U-5890 .................... 245 1U-6829 .................... 216
1U-5536 ......................52 1U-5631 .............. 244–245 1U-5891 .................... 245 1U-6832 .................... 216
1U-5545 ................. 19, 29 1U-5632 .............. 244–245 1U-5892 .................... 244 1U-6834 .................... 216
1U-5546 ................. 29, 31 1U-5633 ........ 244–245, 270 1U-5893 .................... 244 1U-6835 .................... 216
1U-5547 ................. 29, 31 1U-5634 .............. 245, 269 1U-6151 .................... 107 1U-6836 .................... 216
1U-5548 ............ 23, 29, 31 1U-5635 .............. 245, 270 1U-6152 .................... 107 1U-6837 .................... 216
1U-5549 ................. 29, 31 1U-5636 .................... 245 1U-6156 .................... 362 1U-6838 .................... 216
1U-5572 .............. 427–428 1U-5637 .................... 245 1U-6539 .................... 250 1U-6839 .................... 216
1U-5573 .................... 428 1U-5638 ........ 245, 269–270 1U-6540 .................... 250 1U-6841 .................... 216
1U-5574 .................... 428 1U-5639 .................... 245 1U-6600 .................... 252 1U-6842 .................... 216
1U-5575 .............. 427–428 1U-5640 .................... 245 1U-6659 .................... 306 1U-6843 .................... 216
1U-5576 .................... 428 1U-5641 .................... 245 1U-6660 .................... 306 1U-6844 .................... 216
1U-5577 .................... 428 1U-5642 .............. 245, 269 1U-6689 .................... 111 1U-6846 .................... 216
1U-5586 .................... 243 1U-5643 .............. 245, 270 1U-6691 .................... 111 1U-6854 .................... 234
1U-5587 .................... 243 1U-5644 .................... 245 1U-6692 .................... 111 1U-6855 .................... 234
1U-5588 .................... 243 1U-5645 .................... 245 1U-6700 .................... 243 1U-6856 .................... 234
1U-5589 .................... 243 1U-5646 .............. 245, 269 1U-6705 .................... 385 1U-6857 .................... 234
1U-5590 .................... 243 1U-5647 .............. 245, 270 1U-6706 .................... 385 1U-6858 .................... 234
1U-5591 .................... 243 1U-5648 .................... 245 1U-6707 .................... 385 1U-6859 .................... 234
1U-5592 .................... 243 1U-5649 .................... 245 1U-6708 .................... 385 1U-7234 .................... 175
1U-5593 .................... 243 1U-5682 ........ 244, 269, 275 1U-6709 .................... 386 1U-7250 .................... 160
1U-5594 .................... 243 1U-5683 .............. 244, 270 1U-6710 .................... 386 1U-7262 .................... 182
1U-5595 .................... 243 1U-5684 .............. 244, 269 1U-6725 .................... 252 1U-7296 .................... 161
1U-5596 .................... 243 1U-5685 .................... 244 1U-6726 .................... 252 1U-7318 .................... 308
1U-5597 .................... 243 1U-5686 ....... 244, 269–270, 1U-6728 .................... 153 1U-7319 .................... 308
1U-5598 .................... 243 275 1U-6784 .................... 230 1U-7321 ................19, 307
437
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
1U-7322 .................... 307 1U-8091 .................... 351 1U-8791 ......................42 1Y-3904 ..................... 421
1U-7419 .................... 107 1U-8095 .................... 347 1U-8792 ......................42 200-1928 .....................44
1U-7427 .................... 360 1U-8096 .................... 347 1U-8798 ......................96 200-1929 ................ 25, 45
1U-7428 .................... 236 1U-8097 .................... 358 1U-8801 .................... 431 200-1931 ................ 19, 45
1U-7429 .................... 206 1U-8099 .................... 358 1U-8805 .................... 426 200-8413 ................ 19, 68
1U-7433 ........ 244, 269, 277 1U-8100 .................... 358 1U-8808 .................... 426 200-8415 ........... 59, 68, 97
1U-7434 ....... 244, 269–270, 1U-8101 .................... 358 1U-8809 .................... 431 200-8417 ........... 59, 68, 97
277 1U-8103 .................... 358 1U-9234 .............. 168, 183 200-8418 ........... 59, 68, 97
1U-7435 .............. 244, 277 1U-8104 .................... 359 1U-9236 .............. 168, 183 200-8419 ........... 59, 68, 97
1U-7436 .............. 244, 277 1U-8122 .................... 247 1U-9238 .............. 168, 183 200-8420 ........... 59, 68, 97
1U-7437 .............. 244, 276 1U-8126 .................... 247 1U-9366 .................... 171 200-8421 ........... 59, 68, 97
1U-7438 .............. 244, 276 1U-8133 .................... 247 1U-9367 .................... 171 200-8422 ........... 59, 68, 97
1U-7521 .................... 255 1U-8138 .................... 247 1U-9368 .................... 171 200-8423 ........... 59, 68, 97
1U-7559 ......................46 1U-8142 .................... 247 1U-9369 .................... 173 200-8424 ........... 59, 68, 97
1U-7560 ......................46 1U-8143 .................... 247 1U-9474 .................... 107 200-8426 ........... 59, 68, 97
1U-7561 ......................46 1U-8144 .................... 247 1U-9476 .................... 107 200-8427 ........... 59, 68, 97
1U-7562 ......................46 1U-8145 .................... 247 1U-9531 .................... 309 200-8428 ........... 59, 68, 97
1U-7563 ........ 21, 24–25, 46 1U-8146 .............. 247–248 1U-9532 .............. 308–309 200-8429 ........... 59, 68, 97
1U-7564 ........ 21, 24–25, 46 1U-8147 .................... 247 1U-9533 .................... 309 202-8643 ................... 191
1U-7565 ........ 21, 24–25, 46 1U-8151 .................... 247 1U-9534 .................... 309 203-4290 ................... 159
1U-7566 ........ 21, 24–25, 46 1U-8152 .............. 247–248 1U-9535 .................... 309 203-5431 ................... 111
1U-7567 ........ 21, 24–25, 46 1U-8153 .................... 247 1U-9536 .................... 309 203-5432 ................... 111
1U-7568 ......................46 1U-8156 .................... 247 1U-9537 .................... 309 203-5433 ................... 111
1U-7569 ........ 21, 24–25, 46 1U-8157 .................... 247 1U-9538 .................... 309 203-5434 ................... 111
1U-7570 ......................46 1U-8158 .................... 247 1U-9539 .................... 309 203-5435 ................... 111
1U-7571 ......................46 1U-8159 .............. 247–248 1U-9547 .................... 311 204-7932 ................... 262
1U-7572 ......................46 1U-8160 .............. 247, 275 1U-9698 .................... 417 204-7933 ................... 262
1U-7573 ......................46 1U-8161 .................... 247 1U-9707 .................... 250 204-7934 ................... 262
1U-7574 ......................46 1U-8162 .................... 247 1U-9708 .................... 252 204-7935 ................... 262
1U-7575 ......................46 1U-8163 .................... 247 1U-9709 .................... 250 204-7936 ................... 262
1U-7576 ......................46 1U-8164 .................... 247 1U-9732 .................... 385 206-4496 ................... 278
1U-7577 ......................46 1U-8165 ........ 247–248, 277 1U-9733 .................... 385 206-4499 ................... 278
1U-7578 ......................46 1U-8166 .................... 247 1U-9734 .................... 385 207-0631 ................... 159
1U-7579 ......................46 1U-8167 .............. 247, 275 1U-9763 .................... 433 207-1515 .....................24
1U-7580 ......................46 1U-8168 .................... 247 1U-9787 .................... 236 207-1601 ................... 425
1U-7581 ......................46 1U-8169 ........ 247–248, 277 1U-9788 .................... 206 207-2736 ................... 146
1U-7582 ......................46 1U-8170 .................... 247 1U-9915 .................... 178 207-8155 ................... 104
1U-7583 ......................46 1U-8171 .............. 247, 275 1U-9916 .................... 178 207-8160 ................... 115
1U-7584 ......................46 1U-8172 .................... 247 1U-9917 .................... 178 208-6183 ...............18, 168
1U-7585 ........ 21, 24–25, 46 1U-8173 .............. 247, 277 1U-9918 .................... 178 211-0136 .......... 19, 21, 190
1U-7586 ......................46 1U-8174 .................... 247 1U-9919 .................... 179 211-0616 .....................19
1U-7587 .................... 162 1U-8184 .................... 248 1U-9920 .................... 179 211-0617 .....................20
1U-7591 .................... 162 1U-8209 .................... 358 1U-9921 .................... 180 212-8144 ........... 19–21, 23
1U-7592 .................... 162 1U-8281 .................... 234 1U-9939 .................... 207 212-8145 ..... 19–20, 23, 182
1U-7593 .................... 162 1U-8282 .................... 234 1U-9940 .................... 207 212-8146 ................... 182
1U-7610 .................... 255 1U-8283 .................... 234 1U-9941 .................... 207 213-1983 ..... 19, 21, 26, 151
1U-7622 .............. 210–211 1U-8285 .................... 230 1U-9942 .................... 207 213-1985 ...... 20, 22–23, 62,
1U-7623 ........ 210–211, 213 1U-8286 .................... 230 1U-9943 .................... 207 182
1U-7626 .................... 104 1U-8586 ......................96 1U-9945 .................... 207 213-3086 .....................77
1U-7627 .................... 104 1U-8701 ......................91 1U-9946 .................... 207 213-3087 ................ 77, 91
1U-7628 .................... 104 1U-8757 .................... 366 1U-9957 .................... 206 213-3088 ................ 77, 91
1U-7629 .................... 104 1U-8758 .................... 153 1U-9971 .................... 206 213-3089 ................ 77, 91
1U-7630 .................... 104 1U-8759 .................... 153 1U-9972 .................... 206 213-3091 ................ 77, 91
1U-7631 .................... 104 1U-8760 ......................42 1U-9974 .................... 206 213-3094 ................ 77, 91
1U-7632 ......................46 1U-8764 .................... 246 1U-9977 .................... 179 213-3099 ................ 77, 91
1U-7648 .................... 366 1U-8765 .................... 246 1U-9978 .................... 179 213-3102 ................ 77, 91
438
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
213-3104 ................ 77, 91 214-1157 ................ 64, 88 214-6567 .....................93 214-7217 .....................31
213-3107 ................ 77, 91 214-1158 ................ 64, 88 214-6568 .....................93 214-7218 .....................31
213-3109 ................ 77, 91 214-1159 ................ 64, 88 214-6569 .....................93 214-7219 .....................22
213-3110 ................ 77, 91 214-1160 ................ 64, 88 214-6570 .....................93 214-7220 .....................31
213-3515 .....................77 214-1161 .....................71 214-6571 .....................93 214-7222 ................ 21, 31
213-3516 ................ 77, 91 214-1162 ................ 71, 90 214-6572 .....................93 214-7223 ........... 21, 25, 31
213-3517 ................ 77, 91 214-1163 ................ 71, 90 214-6599 .....................93 214-7314 .....................49
213-3518 ................ 77, 91 214-1164 ................ 71, 90 214-6600 .....................93 214-7315 .....................49
213-3520 ................ 77, 91 214-1165 ................ 71, 90 214-6601 .....................93 214-7316 .....................62
213-3521 ................ 77, 91 214-1166 ................ 71, 90 214-6602 .....................93 214-7318 .....................21
213-3522 ................ 77, 91 214-1167 ................ 71, 90 214-6603 .....................93 214-7319 .....................62
213-3523 ................ 77, 91 214-1168 ................ 71, 90 214-6604 .....................93 214-7320 ................... 106
213-3524 ................ 77, 91 214-1169 ................ 71, 90 214-6605 .....................93 214-7321 ................... 106
213-3525 ................ 77, 91 214-1170 ................ 71, 90 214-6606 .....................93 214-7322 ................ 25, 39
213-3526 ................ 77, 91 214-1171 ................ 71, 90 214-6607 .....................93 214-7323 .....................39
213-3528 ................ 77, 91 214-1172 ................ 71, 90 214-6608 .....................93 214-7324 .....................25
213-3530 ................ 77, 91 214-3635 ................... 256 214-6609 .....................93 214-7326 .....................62
213-4437 ...............55, 115 214-6142 ................... 106 214-6611 .....................93 214-7327 ................... 106
213-4443 .....................55 214-6153 .....................21 214-6612 .....................93 214-7328 ................... 106
213-6923 .....................78 214-6490 .....................65 214-6613 .....................93 214-7329 ........... 21, 25, 48
213-6924 ...............78, 102 214-6491 ................ 65, 87 214-6614 .....................93 214-7330 ................ 21, 39
213-6926 ..... 21, 25, 78, 101 214-6492 ................ 65, 87 214-6620 .....................66 214-7331 ................... 106
213-6927 ..... 21, 25, 78, 101 214-6493 ................ 65, 87 214-6621 ................ 66, 98 214-7332 .....................39
213-6928 ...............78, 101 214-6494 ................ 65, 87 214-6623 ................ 66, 98 214-7333 .....................61
213-6929 ..... 21, 25, 78, 101 214-6495 ................ 65, 87 214-6624 ................ 66, 98 214-7335 .....................49
213-6930 ...............78, 102 214-6496 ................ 65, 87 214-6625 ................ 66, 98 214-7339 ................ 60–61
213-6932 ...............78, 102 214-6497 .....................89 214-6626 ................ 66, 98 214-7340 ................ 60–61
213-6933 ...............78, 102 214-6498 .....................70 214-6627 ................ 66, 98 214-7341 .....................61
213-6934 ...............78, 102 214-6500 ................ 70, 90 214-6628 ................ 66, 98 214-7342 ................... 148
213-6935 ...............78, 102 214-6501 ................ 70, 90 214-6629 ................ 66, 98 214-7346 ...............79, 102
213-6936 ...............78, 102 214-6503 ................ 70, 90 214-6630 ................ 66, 98 214-7347 ................... 151
213-6937 ...............78, 102 214-6504 ................ 70, 90 214-6631 ................ 66, 98 214-7349 ................... 137
213-9967 .....................86 214-6506 ........... 70, 90, 93 214-6632 ................ 66, 98 214-7350 ................... 137
213-9968 ................ 68, 86 214-6507 ................ 70, 90 214-6633 ................ 66, 98 216-1685 ................... 112
213-9969 ................ 68, 86 214-6509 ................ 70, 90 214-6634 ................ 67–68 217-1591 ................... 288
213-9970 ................ 68, 86 214-6510 ................ 70, 90 214-6635 ................ 67, 98 222-3048 ............. 119, 122
213-9971 ................ 68, 86 214-6511 ................ 70, 90 214-6636 ................ 67, 98 222-3050 ............. 120, 122
213-9972 ................ 68, 86 214-6512 ................ 70, 90 214-6637 ................ 67, 98 222-3053 ............. 120, 122
213-9974 ................ 68, 86 214-6513 ................ 70, 90 214-6638 ................ 67, 98 222-3054 ............. 121–122
213-9978 ................ 68, 86 214-6514 ................ 70, 90 214-6639 ................ 67, 98 222-3055 ............. 121–122
213-9980 ................ 68, 86 214-6521 ................ 83, 91 214-6640 ................ 67, 98 222-3059 ................... 128
213-9981 ................ 68, 86 214-6522 ................ 83, 91 214-6641 ................ 67, 98 222-3061 ................... 126
214-1143 .....................64 214-6523 ................ 83, 91 214-6642 ................ 67, 98 222-3062 ................... 126
214-1144 ................ 64, 87 214-6524 ................ 83, 91 214-6643 ................ 78, 80 222-3063 ................... 123
214-1145 ................ 64, 87 214-6526 ................ 83, 91 214-6644 ...............78, 102 222-3064 ............. 123, 217
214-1146 ................ 64, 88 214-6553 .....................92 214-6645 ...............78, 102 222-3065 ............. 123, 217
214-1147 ................ 64, 88 214-6554 .....................92 214-6646 ...............78, 102 222-3067 ................... 123
214-1148 ................ 64, 88 214-6556 .....................92 214-6647 ...............78, 102 222-3068 ................... 123
214-1149 ................ 64, 88 214-6557 .....................92 214-6648 ...............78, 102 222-3069 ................... 124
214-1150 ................ 64, 88 214-6558 .....................92 214-6649 ...............78, 102 222-3071 ................... 125
214-1151 .....................64 214-6559 .....................92 214-6650 ...............78, 102 222-3074 ................... 125
214-1152 ................ 64, 88 214-6560 .....................92 214-6651 ...............78, 102 222-3076 ................... 125
214-1153 ................ 64, 88 214-6561 .....................92 214-6652 ...............78, 102 222-3077 ................... 125
214-1154 ................ 64, 88 214-6562 .....................92 214-6653 ...............79, 102 222-3080 ................... 127
214-1155 ................ 64, 88 214-6564 .....................93 214-7214 .....................31 222-3083 ................... 129
214-1156 ................ 64, 88 214-6565 .....................93 214-7215 .....................31 222-3084 ................... 123
439
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
222-3110 ................... 424 227-4392 ................... 110 236-8038 ................... 229 239-4142 ................... 163
222-3111 ................... 419 227-4393 ................... 110 236-8041 ................... 219 239-4143 ................... 163
222-3112 ................... 419 227-4397 .....................93 236-8043 ................... 219 239-4255 ................... 163
222-3115 ................... 423 230-0812 ................ 60–61 236-8048 ................... 219 239-4964 ................... 351
222-3120 ................... 415 230-0813 ................ 60–61 236-8049 ................... 219 239-4965 ................... 351
222-3121 ................... 434 231-3942 ................... 282 236-8051 ................... 219 239-4966 ................... 351
222-3122 ................... 415 231-4550 .....................96 236-8052 ................... 219 239-4967 ................... 351
222-7876 .....................18 231-6041 ................... 122 236-8053 ................... 219 239-6823 ....... 15, 55, 60–61
223-1154 ................... 130 231-6043 ................... 122 236-8054 ................... 219 239-6824 ...... 12, 16, 26, 56,
223-1693 ................... 158 231-6063 ................... 122 236-8055 ................... 220 60–61
223-1694 ................... 158 231-6064 ................... 122 236-8056 ................... 220 239-6825 ................ 60–61
223-1695 ................... 158 231-6068 ................... 122 236-8061 ................... 227 239-6826 ...... 12, 16, 19, 21,
223-1697 ................... 158 231-6070 ................... 122 236-8066 ................... 229 24–25, 56, 61
223-1698 ................... 158 231-6071 ................... 122 236-8067 ................... 229 240-1678 ................... 405
223-4352 ................... 127 231-6073 ................... 122 236-8068 ................... 229 241-0706 ............. 145–146
223-4353 ................... 127 231-6074 ................... 122 236-8069 ................... 216 241-0860 .....................85
223-4354 ................... 127 231-6098 ................... 122 236-8070 ................... 222 241-0861 .....................85
223-4355 ................... 127 231-7015 ................... 404 236-8071 ................... 222 241-0862 .....................85
223-4356 ................... 127 231-7016 ................... 404 236-8072 ................... 218 241-0863 .....................85
223-4357 ................... 130 231-7017 ................... 404 236-8073 ................... 218 241-0864 .....................85
223-4358 ................... 130 231-7018 ................... 404 236-8074 ................... 218 241-0865 .....................85
223-4359 ................... 130 231-9464 ................... 123 236-8075 ................... 218 241-0866 .....................85
225-6502 ................... 412 231-9465 ............. 123–124 236-8076 ................... 218 241-0867 .....................85
226-0102 ................... 127 231-9468 ................... 123 236-8078 ................... 218 241-0868 .....................85
226-0124 ................... 127 231-9469 ................... 123 236-8079 ................... 218 241-0869 .....................85
226-0125 ................... 241 232-0756 ................... 127 236-8081 ................... 218 241-0870 .....................85
226-0126 ................... 241 232-5041 ................... 172 236-8082 ................... 218 241-0871 .....................85
226-1900 ................... 160 233-1632 .....................30 236-8083 ................... 218 241-0872 .....................85
226-1901 ................... 160 233-1635 .....................37 236-8092 ................... 213 241-0873 .....................85
226-1902 ................... 160 233-1636 .....................38 236-8093 ................... 239 241-8522 ................... 316
226-1903 ................... 160 233-1637 .....................60 236-8094 ................... 239 241-8529 ................... 316
226-1904 ................... 160 233-1639 ................... 151 236-8095 ................... 239 241-8530 ................... 316
226-1905 ................... 160 233-1640 ................... 147 236-8096 ................... 239 241-9512 ................... 232
226-1906 ................... 160 233-1642 .....................59 236-8097 ................... 239 242-0779 ................... 100
226-1907 ................... 160 233-8145 ................... 294 236-8098 ................... 239 242-6990 ................... 423
227-3129 ................... 160 233-8146 ................... 294 236-8100 ................... 239 243-1874 ................... 316
227-3130 ................... 160 233-8147 ................... 294 236-8101 ................... 239 243-1875 ................... 316
227-3131 ................... 160 233-8583 ............. 345, 381 236-8104 ................... 239 243-1876 ................... 316
227-3132 ................... 160 233-8584 ................... 345 236-8105 ................... 209 243-1877 ................... 316
227-3133 ................... 160 233-8585 ................... 349 236-8106 ................... 209 243-1878 ................... 316
227-3134 ................... 160 233-8586 ................... 349 236-8107 ................... 209 243-1879 ................... 316
227-3795 ................... 161 233-8587 ................... 349 236-8109 ................... 209 243-5173 ................... 106
227-3796 ................... 161 234-0544 ................... 126 236-8111 ................... 209 243-5174 ................... 106
227-3797 ................... 161 234-0545 ................... 126 236-8114 ................... 209 243-5175 ................... 106
227-3798 ................... 161 234-6041 .....................97 236-8116 ................... 209 243-5177 ................... 106
227-3799 ................... 161 235-0844 ....... 373, 380–382 237-3653 ................... 222 243-5178 ................... 106
227-3800 ................... 161 235-0845 ....... 374, 380–382 237-5181 ................... 352 243-5179 ................... 106
227-4383 ................... 109 235-0847 ................... 375 238-8244 ................... 310 243-5180 ................... 106
227-4384 ................... 109 235-0848 ................... 380 239-1085 ................... 341 243-5181 ................... 106
227-4385 ................... 109 235-0849 ................... 378 239-1086 ................... 346 243-5182 ................... 108
227-4386 ................... 110 235-0850 ................... 377 239-1087 ................... 346 243-5183 ................... 108
227-4387 ................... 110 235-8598 ................... 389 239-1088 ................... 349 243-5184 ................... 108
227-4388 ................... 110 236-1169 ................... 152 239-1089 ................... 348 243-5185 ................... 108
227-4389 ................... 110 236-2648 ................... 294 239-1090 ................... 348 243-5186 ................... 108
227-4390 ................... 110 236-2654 ................... 294 239-4140 ................... 163 243-5187 ................... 108
227-4391 ................... 110 236-2655 ................... 294 239-4141 ................... 163 243-5188 ................... 108
440
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
243-5189 ................... 108 246-8197 .....................84 254-5319 ................... 225 261-8575 .....................82
243-5190 ................... 108 246-8199 .....................84 254-5320 ................... 225 261-8576 .....................82
243-5450 ................... 412 246-8499 ................... 106 254-5321 ................... 225 261-8577 .....................82
243-5451 ................... 412 247-4447 ................... 331 254-5322 ................... 225 261-8578 .....................82
243-6495 ................... 126 247-6412 ................... 336 254-5323 ................... 225 261-8579 .....................82
243-6496 ................... 126 247-6413 ................... 336 254-5324 ................... 226 261-8581 .....................81
244-0910 ................... 162 247-9662 ................... 276 254-5325 ................... 226 261-8583 .....................81
245-3224 ............. 309–310 247-9663 ................... 276 254-5326 ................... 226 261-8585 .....................81
245-9823 ................... 158 248-2283 ................... 189 254-5327 ................... 226 261-8586 .....................81
246-5147 ................... 328 248-8810 .....................33 254-5328 ................... 226 261-8587 .....................81
246-5149 ................... 328 248-8811 .....................33 254-5329 ................... 226 261-8589 .....................81
246-5151 ................... 328 248-8812 .....................33 254-5330 ................... 226 261-8590 .....................81
246-5155 ................... 329 248-8813 .....................33 254-5331 ................... 226 261-8591 .....................81
246-5163 ................... 329 248-8814 .....................33 254-5332 ................... 226 262-2758 ................... 138
246-5164 ................... 332 248-8815 .....................33 254-5333 ................... 226 262-2759 ................... 138
246-5165 ................... 330 248-8816 .....................33 254-5334 ................... 226 262-4862 ................... 403
246-5167 ................... 331 248-8817 .....................33 254-5335 ................... 226 262-4866 ................... 353
246-5179 ................... 334 248-8818 .....................33 254-5336 ................... 209 262-4868 ................... 242
246-5180 ................... 333 248-8819 .....................35 254-5337 ................... 209 262-9176 ................... 337
246-5181 ................... 334 248-8820 .....................35 254-5338 ................... 209 262-9301 ................... 337
246-7509 ................... 123 248-8822 .....................35 254-5339 ................... 209 262-9720 ................... 208
246-7511 ................... 277 248-8823 .....................35 254-5340 ................... 209 262-9721 ................... 207
246-7513 ................... 277 248-8824 .....................35 254-5341 ................... 209 262-9722 ................... 207
246-7514 ................... 277 248-8825 .....................35 254-5342 ................... 209 262-9723 ................... 207
246-7515 ................... 277 248-8826 .....................35 254-5345 ................... 210 262-9724 ................... 208
246-7516 ................... 277 248-8827 .....................35 254-5346 ................... 210 262-9725 ................... 208
246-7517 ................... 277 248-8828 .....................35 254-5347 ................... 210 262-9726 ................... 207
246-7518 ................... 277 248-8829 .....................35 254-5348 ................... 210 262-9727 ................... 207
246-7519 ................... 277 248-8830 .....................35 254-5349 ................... 210 262-9728 ................... 208
246-7520 ................... 277 248-8831 .....................35 254-5350 ................... 210 262-9729 ................... 208
246-7521 ................... 277 248-8832 .....................35 254-5351 ................... 210 262-9732 ................... 233
246-7522 ................... 277 249-1815 ................... 412 256-4816 .....................24 262-9736 ................... 219
246-7523 ................... 277 249-5284 ................... 208 256-4879 ................ 25, 45 262-9737 ................... 233
246-7524 ................... 277 249-5285 ................... 208 258-5686 .....................95 262-9738 ................... 222
246-7525 ................... 277 249-5286 ................... 208 259-7005 ................... 334 262-9739 ................... 225
246-7526 ................... 277 249-7265 ................... 341 259-7006 ................... 334 262-9740 ................... 233
246-7528 ................... 277 250-6865 ................... 174 259-7007 ................... 333 262-9741 ................... 234
246-8173 .....................83 250-6866 ................... 174 259-7008 ................... 333 262-9742 ................... 235
246-8175 .....................83 254-3422 ................... 370 260-1779 ................... 334 262-9743 ................... 235
246-8176 .....................83 254-3767 ................... 380 260-3764 ................... 137 262-9744 ................... 235
246-8177 .....................83 254-3768 ................... 381 260-3765 ................... 137 262-9745 ................... 235
246-8178 .....................83 254-3769 ................... 382 260-3766 ................... 137 262-9746 ................... 239
246-8179 .....................83 254-3770 ............. 376, 381 260-4783 ................... 348 262-9747 ................... 239
246-8180 .....................83 254-3969 ....... 373, 380, 382 260-4785 ................... 348 262-9748 ................... 239
246-8181 .....................83 254-5307 ............. 216–217 261-0022 ................... 310 262-9749 ................... 179
246-8182 .....................83 254-5308 ............. 216–217 261-0024 ................... 311 262-9750 ................... 179
246-8184 .....................83 254-5309 ............. 216–217 261-0114 ................... 375 262-9752 ................... 179
246-8185 .....................84 254-5310 ................... 207 261-0115 ................... 376 262-9959 ................... 408
246-8186 .....................84 254-5311 ................... 207 261-0443 ...............55, 115 262-9980 ................... 232
246-8187 .....................84 254-5312 ................... 207 261-0446 ................... 115 263-0794 ................... 401
246-8188 .....................84 254-5313 ................... 207 261-8569 ................... 115 263-0796 ................... 401
246-8189 .....................84 254-5314 ................... 207 261-8570 ................... 115 263-0867 ................... 346
246-8190 .....................84 254-5315 ................... 207 261-8571 .....................96 263-0877 ................... 387
246-8191 .....................84 254-5316 ................... 225 261-8572 .....................82 263-0879 ................... 388
246-8192 .....................84 254-5317 ................... 225 261-8573 .....................82 263-0881 ................... 386
246-8194 .....................84 254-5318 ................... 225 261-8574 .....................82 263-0883 ................... 387
441
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
263-0884 ................... 408 263-7202 ................... 266 263-9074 ................... 169 270-5337 ................... 394
263-0885 ................... 402 263-7203 ................... 266 263-9075 ................... 169 270-5338 ................... 394
263-0886 ................... 402 263-7204 ................... 266 263-9076 ................... 169 270-5341 ................... 362
263-0887 ................... 402 263-7205 ................... 266 263–7144 ................... 265 270-5342 ................... 362
263-0891 ............. 396, 405 263-7206 ................... 266 264-0414 ................... 169 270-5343 ................... 395
263-0892 ................... 371 263-7207 ................... 266 264-4352 ................... 241 270-5344 ................... 395
263-1022 ................... 400 263-7208 ................... 266 264-4353 ................... 168 270-5345 ................... 395
263-1030 ................... 400 263-7209 ................... 266 264-4355 ................... 241 270-5346 ................... 402
263-1031 ................... 400 263-7210 ................... 266 264-4357 ................... 241 270-5347 ................... 361
263-3341 .....................61 263-7211 ................... 266 264-4358 ................... 241 270-5348 ................... 393
263-3817 ................... 158 263-7212 ................... 266 264-4359 ................... 242 270-5349 ................... 393
263-3819 ................... 158 263-7213 ................... 266 264-4360 ................... 401 270-5350 ................... 393
263-3820 ................... 158 263-7215 ................... 266 264-4361 ................... 401 270-5351 ................... 393
263-3821 ................... 158 263-7216 ................... 266 264-4363 ................... 401 270-5352 ................... 393
263-3822 ................... 158 263-7217 ................... 266 264-4364 ................... 401 270-5353 ................... 393
263-7140 ................... 265 263-7218 ................... 266 264-4372 ................... 241 271-1648 ................... 415
263-7141 ................... 265 263-7219 ................... 266 265-2255 ................... 369 271-4600 .....................73
263-7142 ................... 265 263-7220 ................... 266 265-2256 ............. 370, 416 271-4601 ................ 73, 88
263-7145 ................... 265 263-7221 ................... 266 266-2281 ................... 241 271-4602 ................ 73, 88
263-7146 ................... 265 263-7222 ................... 266 266-2282 ................... 241 271-4603 ................ 73, 88
263-7147 ................... 266 263-7223 ................... 266 266-2283 ................... 241 271-4604 ................ 73, 88
263-7155 ................... 265 263-7224 ................... 266 266-3452 ................... 234 271-4605 ................ 73, 88
263-7156 ................... 265 263-7225 ................... 266 266-3736 ....... 118–119, 122 271-4606 ................ 73, 88
263-7157 ................... 265 263-7226 ................... 266 266-3737 ............. 118, 122 271-4607 ................ 73, 88
263-7158 ................... 265 263-7227 ................... 266 266-3738 .....................87 271-4608 ................ 73, 88
263-7160 ................... 265 263-7228 ................... 266 266-3739 .....................87 271-4609 ................ 73, 88
263-7161 ................... 265 263-7230 ................... 266 267-6532 ............. 370–371 271-4610 ................ 73, 88
263-7162 ................... 265 263-7232 ................... 266 267-6535 ................... 371 271-4611 ................ 73, 88
263-7163 ................... 265 263-7233 ................... 266 267-6536 ................... 371 271-4612 ................ 73, 88
263-7164 ................... 265 263-7234 ................... 266 267-8539 ................... 406 271-4613 .....................73
263-7165 ................... 265 263-7235 ................... 266 267-8540 ................... 406 271-4615 ................ 73, 88
263-7167 ................... 265 263-7236 ................... 266 267-8541 ................... 406 271-4616 ................ 73, 88
263-7168 ................... 265 263-7238 ................... 266 267-8542 ................... 406 271-4617 ................ 73, 88
263-7170 ................... 265 263-7239 ................... 266 267-8543 ................... 406 271-4618 ................ 73, 89
263-7172 ................... 265 263-7240 ............. 266–267 267-8544 ................... 406 271-4619 ................ 73, 89
263-7173 ................... 265 263-7241 ................... 267 267-8545 ................... 406 271-4620 ................ 73, 89
263-7174 ................... 265 263-7242 ................... 267 268-5809 ................... 409 271-4621 ................ 73, 89
263-7175 ................... 265 263-7243 ................... 267 268-5814 ................... 409 271-4622 .....................74
263-7177 ................... 265 263-7244 ................... 267 268-8709 ................... 216 271-4623 ................ 74, 99
263-7178 ................... 265 263-7245 ................... 267 269-1944 ................... 423 271-4624 ................ 74, 99
263-7179 ................... 265 263-7246 ................... 267 269-3123 ................... 310 271-4625 ................ 74, 99
263-7180 ................... 265 263-7249 ................... 266 269-3368 ................... 371 271-4626 ................ 74, 99
263-7181 ................... 265 263-7250 ................... 266 269-7255 ................... 233 271-4627 ................ 74, 99
263-7182 ................... 265 263-7251 ................... 266 269-7256 ................... 233 271-4628 ................ 74, 99
263-7183 ................... 265 263-7253 ................... 266 269-7257 ................... 233 271-4630 ................ 74, 99
263-7184 ................... 266 263-7254 ................... 266 269-7258 ................... 233 271-4631 ................ 74, 99
263-7190 ................... 266 263-7255 ................... 265 269-7259 ................... 233 271-4632 ................ 74, 99
263-7193 ................... 266 263-7256 ................... 265 269-7260 ................... 233 271-4633 ................ 74, 99
263-7194 ................... 266 263-7258 ................... 265 269-8297 ................... 418 271-4634 ................ 74, 99
263-7195 ................... 266 263-7259 ................... 265 270-5329 ................... 393 271-4635 ................ 74, 99
263-7196 ................... 266 263-7260 ................... 265 270-5331 ................... 393 271-4636 ................ 74, 99
263-7197 ................... 266 263-9067 ................... 169 270-5332 ................... 393 271-4637 ................ 74, 99
263-7198 ................... 266 263-9069 ................... 169 270-5333 ................... 393 271-4638 .....................75
263-7199 ................... 266 263-9070 ................... 169 270-5334 ................... 394 271-4639 ...............75, 100
263-7200 ................... 266 263-9071 ................... 169 270-5335 ................... 394 271-4640 ...............75, 100
263-7201 ................... 266 263-9072 ................... 169 270-5336 ................... 394 271-4641 ...............75, 100
442
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
271-4642 ...............75, 100 271-4723 ................... 113 276-0502 ................... 324 282-9530 ................... 328
271-4643 ...............75, 100 271-4724 ................... 113 276-0731 ............. 281, 286 282-9531 ................... 329
271-4644 ...............75, 100 272-1208 ............. 155–157 276-0740 ............. 281, 286 282-9532 ................... 329
271-4645 ...............75, 100 272-1212 ............. 155, 157 276-0741 ............. 281, 286 282-9533 ................... 329
271-4646 ...............75, 100 272-1215 ............. 155–157 276-0742 ............. 281, 286 285-1145 ................... 398
271-4647 ...............75, 100 272-1218 ............. 155, 157 276-0743 ............. 281, 286 285-1146 ................... 398
271-4648 .......... 75, 83, 100 272-1222 ................... 156 276-0744 ............. 281, 286 285-1147 ................... 398
271-4650 ...............75, 100 272-1223 ................... 156 276-0745 ............. 281, 286 285-1148 ................... 399
271-4651 ...............75, 100 272-1224 ................... 155 276-0746 ............. 281, 286 285-1149 ................... 399
271-4652 ...............75, 100 272-1225 ................... 155 276-0747 ............. 281, 286 285-1150 ................... 399
271-4653 ...............75, 100 272-1227 ................... 155 276-0748 ............. 281, 286 287-2075 ................... 156
271-4654 .....................75 272-1228 ................... 155 276-0749 ............. 281, 286 287-2076 ................... 156
271-4655 ................ 75, 99 272-1230 ................... 155 276-0750 ............. 281, 286 288-2512 ................... 117
271-4656 ................ 75, 99 272-1233 ................... 155 276-0751 ....... 281, 286–287 288-4209 ................... 368
271-4657 ................ 75, 99 272-1237 ................... 155 276-0752 ............. 281, 286 288-4210 ................... 368
271-4658 ................ 75, 99 272-1239 ................... 155 276-0753 ............. 281, 286 288-4211 ................... 368
271-4659 ................ 75, 99 272-1240 ................... 155 276-0754 ............. 281, 286 288-4212 ................... 368
271-4660 ................ 75, 99 272-1241 ................... 156 276-0755 ............. 281, 286 291-6710 ................... 392
271-4661 ................ 75, 99 272-1242 ................... 156 276-0756 ............. 281, 286 291-6711 ................... 392
271-4662 ................ 75, 99 272-1243 ................... 156 276-0757 ............. 281, 286 293-0712 .....................62
271-4663 ................ 75, 99 272-1244 ................... 156 276-0758 ................... 287 293-2978 ................... 393
271-4664 ................ 75, 99 272-1245 ................... 156 276-0759 ................... 287 293-3025 ................ 19, 44
271-4665 ................ 75, 99 272-1246 ................... 156 276-0760 ................... 287 293-3026 ................ 19, 45
271-4666 ................ 75, 99 272-1247 ................... 156 276-0761 ................... 287 2B-0858 .................... 284
271-4667 ................ 75, 99 272-1248 ................... 156 276-0762 ................... 287 2B-1730 .................... 111
271-4668 ................ 75, 99 272-1249 ................... 156 276-7018 ................... 281 2B-1731 .................... 111
271-4669 .....................74 272-1250 ................... 156 277-8790 ...............14, 148 2B-2526 .................... 250
271-4670 ................ 74, 89 272-1251 ................... 156 279-2267 ............. 214, 224 2B-4317 .................... 179
271-4671 ................ 74, 89 272-1252 ................... 156 280-1555 ................... 426 2B-7408 .................... 284
271-4672 ................ 74, 89 272-1253 ................... 156 280-2675 ............. 118, 122 2B-7409 .................... 284
271-4673 ................ 74, 89 272-5745 ................... 432 280-2676 ............. 118, 122 2B-7457 .................... 284
271-4674 ................ 74, 89 273-3527 ................... 156 280-2677 ............. 118, 122 2B-9256 .................... 251
271-4675 ................ 74, 89 273-3528 ................... 157 280-2678 ................... 119 2J-2668..................... 285
271-4676 ................ 74, 89 274-1677 ................... 146 280-2679 ............. 119, 122 2J-5608..................... 285
271-4677 ................ 74, 89 274-7454 ................... 360 280-2680 ............. 119, 122 2M-2689.................... 144
271-4678 ................ 74, 89 274-7455 ................... 360 280-2681 ............. 119, 122 2M-9780.................... 283
271-4679 ................ 74, 89 274-7456 ................... 360 280-2682 ............. 120, 122 2P-2333..................... 421
271-4680 ................ 74, 89 274-7457 ................... 361 280-2683 ............. 120, 122 2P-2334.......................94
271-4681 ................ 74, 89 274-7458 ................... 360 280-2684 ............. 121–122 2P-2335.......................94
271-4683 .....................76 275-5265 ................... 220 280-8144 ................... 430 2P-2336.......................94
271-4684 ................ 76, 99 275-5266 ................... 220 280-8147 ................... 430 2P-2338.......................94
271-4685 ................ 76, 99 276-0487 ................... 325 280-8148 ................... 430 2P-5475.................. 70, 90
271-4686 ................ 76, 99 276-0488 ................... 325 280-8961 ................... 429 2P-5476.................. 70, 90
271-4687 ................ 76, 99 276-0489 ................... 325 281-8271 ................... 220 2P-5477.................. 70, 90
271-4688 ................ 76, 99 276-0490 ................... 325 281-8272 ................... 220 2P-5478.................. 70, 90
271-4689 ................ 76, 99 276-0491 ................... 323 281-8273 ................... 220 2P-5479.................. 70, 90
271-4690 ................ 76, 99 276-0492 ................... 323 281-8274 ................... 220 2P-5481............. 48, 70, 90
271-4691 ................ 76, 99 276-0493 ................... 323 281-8275 ................... 220 2P-5482.................. 70, 90
271-4692 ...............76, 100 276-0494 ................... 323 281-8282 ................... 220 2P-5483.................. 70, 90
271-4693 ...............76, 100 276-0495 ................... 324 282-2108 ................... 260 2P-5484.................. 70, 91
271-4694 ...............76, 100 276-0496 ................... 324 282-2111 ................... 260 2P-5487.......................52
271-4695 ...............76, 100 276-0497 ................... 324 282-2112 ................... 260 2P-5488.......................52
271-4696 ...............76, 100 276-0498 ................... 324 282-2113 ................... 260 2P-5489.......................52
271-4697 ...............76, 100 276-0499 ................... 324 282-2115 ................... 260 2P-5490.................. 19, 70
271-4700 .....................28 276-0500 ................... 324 282-2116 ................... 260 2P-5491.......................52
271-4722 ................... 113 276-0501 ................... 324 282-9529 ................... 328 2P-5492.......................52
443
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
2P-5493.......................52 305-3129 .....................53 316-0704 ................... 151 384-8706 ................... 384
2P-5494.......................52 306-9601 ................... 397 316-0705 ................... 151 385-1722 ................... 187
2P-5495.......................52 307-3013 ................... 342 316-0706 .......... 14, 18, 151 385-1723 ................... 187
2P-5496.......................52 307-3014 ................... 342 316-0707 ................... 151 385-1724 ................... 187
2P-5497..................... 260 307-3015 ................... 342 317-2806 ................... 139 385-1725 ................... 187
2P-5520.......................52 307-3017 ................... 342 323-6267 .....................91 385-1726 ................... 186
2P-5529..................... 260 307-3018 ................... 342 329-6922 ................... 190 385-1727 ................... 186
2P-5530..................... 256 307-3019 ................... 342 329-6983 ................... 188 385-1728 ................... 186
2P-5531..................... 256 307-3025 ................... 344 331-1264 ................... 157 385-1729 ................... 186
2P-5532..................... 256 307-9919 ............. 375, 380 332-1471 ................... 394 385-1731 ................... 185
2P-5533..................... 256 307-9920 ................... 375 376-4937 ................... 140 385-1737 ................... 189
2P-5534..................... 256 307-9921 ................... 377 377-5722 ................... 295 385-1738 ................... 189
2P-5535..................... 260 307-9922 ................... 376 377-5732 ................... 327 385-1742 ................... 143
2P-5537..................... 260 307-9923 ................... 377 377-5733 ................... 327 385-1743 ................... 143
2P-5538..................... 260 307-9924 ................... 377 377-5734 ................... 326 385-5553 ................... 335
2P-8253.......................43 307-9925 ................... 376 377-5735 ................... 326 385-5554 ................... 335
2P-8261..................... 115 307-9926 ................... 377 377-5736 ................... 326 385-5555 ................... 335
2P-8263..................... 106 307-9927 ................... 376 377-5737 ................... 325 385-5557 ................... 330
2P-8264..................... 106 307-9928 ................... 377 377-5738 ................... 325 385-5560 ................... 376
2P-8265..................... 106 308-6384 ................... 343 377-5739 ................... 325 385-8474 ................... 384
2P-8266..................... 106 308-6391 ................... 343 377-5740 ................... 325 385-8475 ................... 384
2P-8267..................... 106 308-6393 ................... 343 377-5741 ................... 325 386-3218 ................... 256
2P-8268..................... 106 309-2454 ................... 343 377-5742 ................... 327 386-3219 ................... 256
2P-8269..................... 106 309-2455 ................... 343 377-5743 ................... 327 386-3220 ................... 256
2P-8271..................... 106 309-2456 ................... 343 377-5744 ................... 327 386-3221 ................... 256
2P-8272..................... 106 309-2458 ................... 343 377-5745 ................... 327 386-3225 .....................96
2P-8273..................... 106 309-4932 ................... 342 377-5746 ................... 327 386-3226 .....................96
2P-8275..................... 106 310-5678 ................... 367 377-5747 ................... 330 386-3227 .....................96
2P-8276.......................92 310-5713 ................... 367 377-5748 ................... 330 386-3228 .....................97
2P-8289..................... 192 310-5715 ................... 367 377-5749 ................... 330 386-3229 .....................97
2P-8312..................... 154 310-5716 ................... 367 377-5750 ................... 323 386-3230 .....................96
2P-8338..................... 296 310-5744 ................... 367 377-5751 ................... 323 386-3231 .....................97
2P-9697..................... 282 311-2979 ................... 407 377-5752 ................... 323 386-3232 .....................97
2R-5657..................... 284 311-2980 ................... 407 377-5753 ................... 326 386-3234 .....................97
2S-4078..................... 283 311-2981 ................... 407 377-5754 ................... 326 386-3235 ................... 176
2S-7905..................... 283 311-2983 ................... 407 377-5755 ................... 326 386-3236 ................... 175
2Y-5841 ..................... 285 311-2984 ................... 407 377-5756 ................... 328 386-3237 ................... 176
2Y-6461 ..................... 285 311-2985 ................... 407 377-5757 ................... 328 386-3238 ................... 410
2Y-6462 ..................... 285 311-2986 ................... 407 377-5758 ................... 328 386-3245 .....................96
300-5899 ................... 304 311-2987 ................... 407 377-5759 ................... 334 386-3246 .....................96
301-9696 ................... 369 311-2988 ................... 407 377-5760 ................... 334 386-3247 .....................96
303-9339 ................... 369 311-3136 ................... 369 377-5761 ................... 334 386-3249 .....................96
305-3115 .....................54 312-0985 ................... 157 377-5762 ................... 335 386-3252 ................... 105
305-3116 .....................54 312-0988 ................... 157 377-5763 ................... 335 386-3254 .....................62
305-3117 .....................54 312-0992 ................... 157 377-5764 ................... 335 386-3257 .....................95
305-3118 .....................54 312-0996 ................... 157 381-0022 ................... 430 386-3258 .....................95
305-3119 .....................54 312-0999 ................... 157 381-7607 ................... 335 386-3259 .....................95
305-3120 .....................54 312-1002 ................... 157 381-7608 ................... 335 386-3261 ................... 103
305-3121 .....................54 312-1009 ................... 157 381-7609 ................... 335 386-3262 ................... 104
305-3122 .....................54 312-1010 ................... 157 381-7611 ................... 336 386-3264 .....................62
305-3123 .....................54 312-1012 ................... 157 381-7612 ................... 333 386-3266 .....................93
305-3124 .....................54 312-1014 ................... 157 381-7613 ................... 333 386-3267 .....................93
305-3125 .....................54 312-7677 ................... 157 381-7614 ................... 333 386-3268 .....................93
305-3126 .....................54 312-7678 ................... 157 383-8887 ................... 175 386-3274 .....................31
305-3127 .....................54 316-0702 ................... 151 384-6821 ................... 136 386-3275 .....................31
305-3128 .....................54 316-0703 ................... 151 384-6822 ................... 136 386-3276 .....................31
444
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
386-3277 .....................31 386-3338 ................... 101 416-2693 ............. 279–280 463-6821 ................... 116
386-3278 .....................31 386-3340 ................... 137 423-8713 ................... 256 467-9234 ................... 373
386-3279 .....................31 386-3348 ................... 137 423-8977 .....................41 471-9317 ................... 188
386-3280 .....................31 386-3349 ................... 139 429-0608 ................... 164 473-6461 ................... 383
386-3281 .....................31 386-3351 ................... 158 429-0609 ................... 167 4B-4845 .................... 284
386-3282 .....................31 386-3352 .....................31 429-0610 ................... 164 4C-2959..................... 424
386-3283 .....................31 386-3353 .....................92 429-0611 ................... 165 4C-2960..................... 424
386-3284 .....................31 386-3358 ................... 102 429-0612 ................... 165 4C-3302..................... 132
386-3286 .....................51 386-3359 .....................62 429-0613 ................... 166 4C-3304..................... 132
386-3287 .....................51 386-3363 ................... 158 429-0614 ................... 166 4C-3335..................... 247
386-3288 .....................51 386-3364 ................... 173 429-0615 ................... 167 4C-3336..................... 247
386-3289 .....................51 386-3366 ................... 148 429-0616 ................... 167 4C-3337..................... 247
386-3290 .....................51 386-3367 .....................54 430-4389 ................... 129 4C-3338..................... 247
386-3291 .....................51 386-3368 .....................49 430-4392 ................... 129 4C-3339..................... 247
386-3292 .....................51 386-3369 ................... 149 430-4394 ................... 129 4C-3340..................... 247
386-3293 .....................51 386-3370 ................... 149 430-4396 ................... 129 4C-3341..................... 247
386-3294 .....................51 386-3371 ................... 149 432-6083 ............. 279–280 4C-3342..................... 247
386-3295 .....................51 386-3372 ................... 149 432-6084 ............. 279–280 4C-3343..................... 247
386-3296 .....................51 386-3373 ................... 150 432-6085 ............. 279–280 4C-3344..................... 247
386-3297 .....................51 386-5102 ................... 319 432-6086 ............. 279–280 4C-3345..................... 247
386-3298 .....................51 389-2195 ................... 357 432-6087 ............. 279–280 4C-3347..................... 247
386-3299 .....................51 390-3319 ................... 394 432-8907 .....................93 4C-3348..................... 247
386-3300 .....................51 391-2683 ................... 410 435-3382 ................... 140 4C-3349..................... 247
386-3301 .....................51 391-2684 ................... 410 435-4061 ................... 340 4C-3350..................... 247
386-3304 .....................40 391-2685 ................... 410 435-4062 ................... 345 4C-3351..................... 247
386-3305 ................... 162 396-2005 ................... 339 435-5074 ................... 184 4C-3352..................... 247
386-3306 ................... 105 396-2006 ................... 339 435-9843 ................... 281 4C-3353..................... 247
386-3307 ................... 105 396-2007 ...............19, 339 435-9844 ................... 281 4C-3354..................... 247
386-3308 ................... 105 396-2008 ................... 339 435-9845 ................... 281 4C-3355..................... 247
386-3309 ................... 105 396-2009 ................... 339 437-1415 ................... 351 4C-3356..................... 247
386-3310 ................... 104 396-2010 ................... 338 437-1416 ................... 351 4C-3357..................... 247
386-3311 ................... 104 396-2011 ................... 338 437-4620 ................... 172 4C-3358..................... 247
386-3312 ................... 104 396-2012 ................... 338 441-3703 ................... 171 4C-3359..................... 247
386-3313 ................... 105 396-2013 ................... 338 441-5254 ................... 134 4C-3360..................... 247
386-3314 ................... 104 396-2014 ................... 338 441-5255 ................... 131 4C-3361..................... 247
386-3315 ................... 104 396-2015 ................... 338 444-6561 ................... 153 4C-3362..................... 247
386-3316 ................... 104 3B-0551 .................... 284 447-1585 .....................96 4C-3363..................... 247
386-3317 ................... 104 3B-6352 .................... 111 447-1586 .....................96 4C-3364............... 258–259
386-3318 ................... 104 3D-2824 .................... 283 449–8227 ................... 361 4C-3365............... 258–259
386-3319 ................... 104 3J-1907..................... 283 450-9220 .....................62 4C-3366............... 258–259
386-3320 ................... 104 3J-5390..................... 283 451-9943 .....................33 4C-3367............... 258–259
386-3321 ................... 104 3J-7354............... 283, 366 452-0539 ................... 115 4C-3368............... 258–259
386-3322 ................... 104 3K-0360..................... 283 452-0541 ................... 115 4C-3369............... 258–259
386-3323 ................... 104 3K-8460..................... 283 452-0542 ................... 115 4C-3370............... 258–259
386-3324 .....................32 3M-7045.................... 283 452-9933 ................... 161 4C-3371..................... 259
386-3325 .....................32 3P-1535.......................42 452-9934 ................... 161 4C-3372............... 258–259
386-3326 .....................32 3P-1536.......................42 452-9936 ................... 161 4C-3374............... 258–259
386-3327 .....................32 3P-1537.......................42 452-9937 ................... 161 4C-3375............... 258–259
386-3328 .....................32 3P-1549..................... 192 454-3162 .....................31 4C-3376............... 258–259
386-3329 .....................32 3P-2210.......................87 459-0184 ................... 429 4C-3377............... 258–259
386-3330 .....................32 3P-2213..................... 253 460-3238 ................... 341 4C-3378............... 258–259
386-3331 .....................32 3P-2230.......................92 461-2616 ................... 341 4C-3379..................... 259
386-3332 .....................32 3P-2240..................... 113 463-1899 .....................52 4C-3380..................... 258
386-3333 .....................32 3S-0459............ 14, 17, 158 463-3105 ................... 145 4C-3381..................... 259
386-3335 .....................90 3S-0460............ 14, 17, 158 463-3106 ................... 145 4C-3382..................... 259
386-3337 ................... 102 3S-2093..................... 405 463-5569 ................... 411 4C-3383..................... 259
445
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
4C-3384..................... 259 4C-3856..................... 238 4C-4421..................... 246 4C-4961..................... 254
4C-3722..................... 193 4C-3863..................... 227 4C-4422..................... 246 4C-4962..................... 254
4C-3723..................... 193 4C-3864..................... 230 4C-4423..................... 246 4C-4963..................... 254
4C-3724..................... 193 4C-3865..................... 230 4C-4424..................... 246 4C-4965..................... 256
4C-3725..................... 193 4C-3868............... 214, 224 4C-4425..................... 246 4C-4966..................... 256
4C-3741..................... 294 4C-3975..................... 192 4C-4426..................... 248 4C-4967..................... 256
4C-3742..................... 294 4C-4055..................... 366 4C-4463..................... 193 4C-4968..................... 256
4C-3743..................... 294 4C-4056..................... 366 4C-4511..................... 396 4C-4969..................... 256
4C-3745..................... 295 4C-4057..................... 366 4C-4512..................... 396 4C-4970..................... 256
4C-3746............... 295–296 4C-4065.......................49 4C-4513..................... 396 4C-4971..................... 250
4C-3747..................... 296 4C-4067.......................46 4C-4514..................... 396 4C-4972..................... 250
4C-3748..................... 296 4C-4094............... 386, 390 4C-4515..................... 396 4C-4973..................... 250
4C-3749..................... 296 4C-4095............... 387, 390 4C-4516..................... 396 4C-4974..................... 250
4C-3750..................... 296 4C-4099..................... 390 4C-4517..................... 396 4C-4975..................... 250
4C-3751..................... 294 4C-4100..................... 390 4C-4518..................... 396 4C-4976..................... 250
4C-3752..................... 294 4C-4175..................... 232 4C-4600..................... 366 4C-4977..................... 250
4C-3753..................... 294 4C-4181..................... 254 4C-4601..................... 112 4C-4978..................... 250
4C-3754..................... 294 4C-4182..................... 254 4C-4730..................... 192 4C-4979..................... 250
4C-3755..................... 297 4C-4183..................... 412 4C-4763......... 210–211, 213 4C-4980..................... 250
4C-3756..................... 297 4C-4184..................... 412 4C-4764............... 211, 213 4C-4981..................... 250
4C-3757..................... 297 4C-4185..................... 412 4C-4776..................... 391 4C-4982..................... 250
4C-3758..................... 297 4C-4186..................... 412 4C-4777..................... 391 4C-4983..................... 250
4C-3759..................... 297 4C-4189..................... 414 4C-4779............... 391–392 4C-4984..................... 250
4C-3760..................... 297 4C-4190..................... 413 4C-4780............... 391–392 4C-4985..................... 250
4C-3761..................... 297 4C-4191..................... 412 4C-4781..................... 392 4C-4986..................... 250
4C-3766..................... 229 4C-4192..................... 412 4C-4783..................... 194 4C-4987..................... 250
4C-3768..................... 229 4C-4196..................... 414 4C-4787..................... 194 4C-4988..................... 250
4C-3769..................... 226 4C-4197..................... 413 4C-4789..................... 194 4C-4989..................... 250
4C-3770..................... 226 4C-4198..................... 412 4C-4804..................... 427 4C-4990..................... 250
4C-3772..................... 226 4C-4199..................... 413 4C-4805..................... 427 4C-4991..................... 250
4C-3773..................... 226 4C-4200..................... 412 4C-4871............... 167–168 4C-4992..................... 250
4C-3774..................... 226 4C-4202..................... 412 4C-4880............... 391–392 4C-4993..................... 250
4C-3776..................... 226 4C-4205..................... 413 4C-4910..................... 301 4C-4994..................... 250
4C-3777..................... 230 4C-4207..................... 412 4C-4911..................... 298 4C-4995..................... 250
4C-3778..................... 240 4C-4217..................... 432 4C-4913..................... 300 4C-4996..................... 250
4C-3779..................... 240 4C-4381......... 210–211, 213 4C-4914..................... 300 4C-4997..................... 250
4C-3780..................... 240 4C-4382......... 210–211, 213 4C-4917............... 299–300 4C-4998..................... 250
4C-3781..................... 240 4C-4383............... 210–211 4C-4920..................... 301 4C-4999..................... 250
4C-3782..................... 240 4C-4384............... 210–211 4C-4921..................... 301 4C-5000..................... 250
4C-3783..................... 240 4C-4392..................... 294 4C-4929..................... 303 4C-5001..................... 250
4C-3784..................... 240 4C-4393..................... 294 4C-4930..................... 303 4C-5002..................... 250
4C-3785..................... 240 4C-4394..................... 294 4C-4931............... 303–304 4C-5003..................... 250
4C-3809..................... 219 4C-4395..................... 295 4C-4933..................... 304 4C-5004..................... 250
4C-3811..................... 219 4C-4396..................... 295 4C-4934..................... 304 4C-5005..................... 250
4C-3813..................... 219 4C-4399..................... 294 4C-4935..................... 304 4C-5006..................... 250
4C-3821..................... 219 4C-4400..................... 294 4C-4936..................... 304 4C-5007..................... 250
4C-3822..................... 219 4C-4404..................... 347 4C-4938..................... 304 4C-5008..................... 249
4C-3834..................... 219 4C-4412..................... 246 4C-4940..................... 305 4C-5009..................... 249
4C-3845..................... 237 4C-4413..................... 246 4C-4942..................... 305 4C-5010..................... 249
4C-3846..................... 237 4C-4414..................... 246 4C-4943............... 303, 305 4C-5011..................... 249
4C-3849..................... 237 4C-4415..................... 246 4C-4944..................... 304 4C-5012..................... 249
4C-3850..................... 237 4C-4416..................... 246 4C-4946..................... 304 4C-5013..................... 249
4C-3852..................... 237 4C-4417..................... 246 4C-4957..................... 254 4C-5014..................... 249
4C-3853..................... 238 4C-4418..................... 246 4C-4958..................... 254 4C-5015..................... 249
4C-3854..................... 238 4C-4419..................... 246 4C-4959..................... 254 4C-5016..................... 249
4C-3855..................... 238 4C-4420..................... 246 4C-4960..................... 254 4C-5017..................... 249
446
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
4C-5018..................... 249 4C-6338..................... 237 4C-6963.......................40 4C-8406..................... 270
4C-5019..................... 249 4C-6339..................... 237 4C-6964.......................40 4C-8407..................... 270
4C-5020..................... 249 4C-6340..................... 237 4C-6965.......................40 4C-8409..................... 270
4C-5021..................... 249 4C-6341..................... 237 4C-6973.................. 40, 49 4C-8410..................... 270
4C-5026..................... 257 4C-6342..................... 206 4C-6974.......................40 4C-8411..................... 270
4C-5028..................... 257 4C-6343..................... 206 4C-6975.......................40 4C-8412..................... 270
4C-5029..................... 257 4C-6344..................... 206 4C-6976.......................40 4C-8413..................... 270
4C-5051..................... 250 4C-6345..................... 206 4C-6977..................... 170 4C-8414..................... 270
4C-5492..................... 137 4C-6346..................... 206 4C-6978..................... 170 4C-8415..................... 270
4C-5494..................... 253 4C-6347..................... 206 4C-6979..................... 170 4C-8416..................... 271
4C-5495..................... 253 4C-6348..................... 206 4C-6980..................... 170 4C-8417..................... 271
4C-5496..................... 253 4C-6349..................... 206 4C-6981..................... 170 4C-8418..................... 271
4C-5497..................... 253 4C-6350..................... 206 4C-6982..................... 170 4C-8419......... 268–269, 272
4C-5522............... 331, 381 4C-6382..................... 320 4C-6994.......................95 4C-8420......... 268–269, 272
4C-5523............... 331, 381 4C-6383..................... 320 4C-8095..................... 347 4C-8421......... 268–269, 272
4C-5526............... 332, 381 4C-6384..................... 320 4C-8096..................... 347 4C-8422......... 268–269, 272
4C-5527..................... 332 4C-6385..................... 320 4C-8097..................... 347 4C-8423......... 268–269, 272
4C-5529..................... 333 4C-6386..................... 320 4C-8099..................... 383 4C-8424............... 269, 272
4C-5530..................... 259 4C-6387..................... 319 4C-8101..................... 383 4C-8425......... 268–269, 272
4C-5552..................... 206 4C-6388..................... 319 4C-8217..................... 104 4C-8426............... 269, 272
4C-5637..................... 305 4C-6389..................... 319 4C-8364..................... 268 4C-8427............... 269, 272
4C-5638..................... 305 4C-6390..................... 319 4C-8365..................... 268 4C-8428............... 268, 271
4C-5647..................... 162 4C-6391..................... 319 4C-8366..................... 269 4C-8429............... 268, 271
4C-5742..................... 162 4C-6392..................... 390 4C-8368..................... 269 4C-8430............... 268, 271
4C-5746..................... 134 4C-6393..................... 318 4C-8369..................... 269 4C-8431..................... 271
4C-5751..................... 378 4C-6394..................... 319 4C-8370..................... 269 4C-8432............... 268, 271
4C-5819..................... 137 4C-6395..................... 319 4C-8371..................... 269 4C-8433............... 268–269
4C-5842..................... 412 4C-6396..................... 319 4C-8372..................... 269 4C-8434......... 268–269, 272
4C-5843..................... 412 4C-6477..................... 312 4C-8373..................... 269 4C-8435............... 268–269
4C-5877............... 397, 406 4C-6478..................... 312 4C-8374..................... 269 4C-8436......... 268–269, 272
4C-5894..................... 256 4C-6479..................... 312 4C-8375..................... 269 4C-8437......... 268–269, 272
4C-6122..................... 412 4C-6508..................... 434 4C-8376..................... 269 4C-8438......... 268–269, 272
4C-6127..................... 412 4C-6571..................... 385 4C-8377..................... 268 4C-8439............... 269, 272
4C-6129..................... 412 4C-6572..................... 385 4C-8378..................... 268 4C-8440............... 269, 272
4C-6130..................... 414 4C-6573..................... 385 4C-8379..................... 268 4C-8441............... 269, 272
4C-6153..................... 207 4C-6581..................... 350 4C-8383..................... 269 4C-8442............... 269, 272
4C-6154..................... 207 4C-6715..................... 433 4C-8385..................... 269 4C-8443..................... 272
4C-6157..................... 207 4C-6722..................... 254 4C-8386..................... 269 4C-8444............... 269, 272
4C-6158..................... 208 4C-6723.......................94 4C-8387..................... 269 4C-8445............... 269, 272
4C-6161..................... 241 4C-6724..................... 104 4C-8388..................... 269 4C-8446............... 269, 272
4C-6322..................... 236 4C-6741..................... 309 4C-8389..................... 269 4C-8447............... 269, 272
4C-6323..................... 236 4C-6774..................... 133 4C-8390..................... 269 4C-8448......... 269–270, 272
4C-6324..................... 236 4C-6775..................... 133 4C-8391..................... 269 4C-8449......... 269–270, 272
4C-6325..................... 236 4C-6776..................... 133 4C-8392..................... 269 4C-8450............... 270, 272
4C-6326..................... 237 4C-6778..................... 134 4C-8394..................... 269 4C-8451......... 269–270, 272
4C-6327..................... 237 4C-6779..................... 135 4C-8395..................... 269 4C-8452......... 269–270, 272
4C-6328..................... 237 4C-6792..................... 431 4C-8396..................... 269 4C-8453............... 270, 272
4C-6329..................... 237 4C-6794..................... 431 4C-8397..................... 269 4C-8454............... 270, 272
4C-6330..................... 237 4C-6796..................... 420 4C-8398..................... 270 4C-8455............... 270, 272
4C-6331..................... 237 4C-6797..................... 420 4C-8399..................... 270 4C-8456............... 270, 272
4C-6332..................... 237 4C-6833..................... 295 4C-8400..................... 270 4C-8457............... 270, 272
4C-6333..................... 237 4C-6837..................... 296 4C-8401..................... 270 4C-8458..................... 272
4C-6334..................... 237 4C-6922..................... 183 4C-8402..................... 270 4C-8459............... 270, 272
4C-6335..................... 237 4C-6923..................... 183 4C-8403..................... 270 4C-8460............... 270, 272
4C-6336..................... 237 4C-6924..................... 256 4C-8404..................... 270 4C-8461............... 270, 272
4C-6337..................... 237 4C-6962.......................40 4C-8405..................... 270 4C-8462............... 270, 272
447
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
4C-8463............... 270, 272 4C-9470..................... 307 4C-9686......... 268–269, 273 5B-3254 ......................39
4C-8464..................... 270 4C-9563..................... 138 4C-9687............... 268–269 5B-9169 .................... 284
4C-8465............... 270, 272 4C-9592........ 13, 17, 19–20, 4C-9688..................... 269 5F-4764 ....... 14, 18–24, 162
4C-8466............... 271–272 22, 28, 30 4C-9689............... 268–269 5H-4017 .................... 285
4C-8467..................... 271 4C-9593......... 13, 17, 28, 30 4C-9690..................... 269 5H-4018 .................... 285
4C-8469..................... 269 4C-9594........ 13, 17, 19–21, 4C-9691............... 268–269 5H-4019 .................... 285
4C-8472..................... 270 28, 30 4C-9692............... 268–269 5H-4020 .................... 285
4C-8473..................... 270 4C-9595........ 13, 17, 19–22, 4C-9700..................... 269 5H-4845 .................... 183
4C-8474..................... 270 28, 30 4C-9702............... 269, 273 5H-8146 .................... 273
4C-8475............... 270, 273 4C-9596........ 13, 17, 19–20, 4C-9703..................... 269 5M-6213.................... 283
4C-8477..................... 270 28, 30 4C-9704..................... 269 5M-6214.................... 283
4C-8478..................... 271 4C-9597........ 13, 17, 20, 28, 4C-9706..................... 269 5N-5561 .................... 424
4C-8479..................... 271 30 4C-9707..................... 269 5P-0045..................... 286
4C-8480..................... 269 4C-9598........ 13, 17, 19–22, 4C-9715..................... 270 5P-0046..................... 286
4C-8481..................... 269 26, 28, 30 4C-9716..................... 270 5P-0047..................... 286
4C-8482..................... 269 4C-9599........ 13, 17, 26, 28, 4C-9717..................... 270 5P-0048..................... 286
4C-8483..................... 269 30 4C-9718..................... 270 5P-0049..................... 286
4C-8486..................... 269 4C-9600.......................28 4C-9720..................... 268 5P-0050..................... 286
4C-8489..................... 270 4C-9601........ 13, 17, 19, 28, 4C-9721..................... 268 5P-0127.......................86
4C-8491..................... 270 30 4C-9722..................... 268 5P-0144.......................50
4C-8496..................... 271 4C-9602......... 13, 17, 28, 30 4C-9724..................... 269 5P-0166..................... 139
4C-8497............... 269, 272 4C-9603........ 13, 17, 19, 28, 4C-9725..................... 269 5P-0167.......................50
4C-8510..................... 234 30 4C-9727............... 269–270 5P-0294.......................53
4C-8511..................... 224 4C-9604......... 13, 17, 28, 30 4C-9730............... 269–270 5P-0302..................... 150
4C-8512..................... 224 4C-9605........ 14, 17, 19–20, 4C-9731..................... 270 5P-0324.......................52
4C-8513..................... 224 28, 30 4C-9732............... 270, 273 5P-0325.......................52
4C-8514..................... 224 4C-9606.................. 28, 30 4C-9739..................... 195 5P-0326.......................52
4C-8515..................... 224 4C-9607.................. 28, 30 4C-9741..................... 195 5P-0327.......................52
4C-8516..................... 224 4C-9608.................. 28, 30 4C-9742..................... 195 5P-0328.......................52
4C-8517..................... 224 4C-9609.................. 29–30 4C-9743..................... 195 5P-0329.......................52
4C-8518..................... 224 4C-9610.......................28 4C-9744..................... 195 5P-0331.......................52
4C-8519..................... 224 4C-9611.......................30 4C-9745..................... 195 5P-0332.......................52
4C-8520..................... 224 4C-9616..................... 359 4C-9746..................... 195 5P-0333.......................52
4C-8521..................... 224 4C-9617..................... 359 4C-9747..................... 256 5P-0334.......................52
4C-8522............... 234, 240 4C-9618..................... 359 4C-9748.......................96 5P-0335.......................52
4C-8523............... 234, 240 4C-9645..................... 256 4C-9787.......................96 5P-0336.......................52
4C-8524............... 234, 240 4C-9650............... 194–195 4C-9798..................... 174 5P-0946..................... 191
4C-8624..................... 236 4C-9651..................... 195 4C-9799..................... 300 5P-1661.......................51
4C-8625..................... 236 4C-9652..................... 195 4C-9801..................... 305 5P-1662.......................94
4C-8626..................... 236 4C-9653..................... 195 4C-9802..................... 305 5P-1720.................19, 177
4C-8627..................... 236 4C-9654..................... 195 4C-9813..................... 110 5P-1745.......................94
4C-8628..................... 236 4C-9655..................... 195 4C-9814..................... 110 5P-1748.................94, 113
4C-8629..................... 236 4C-9656..................... 195 4C-9818..................... 114 5P-1749............... 113–114
4C-8630..................... 225 4C-9657..................... 195 4C-9819..................... 114 5P-2299..................... 282
4C-8637..................... 218 4C-9658............... 194–195 4C-9917............... 303, 305 5P-2410.......................63
4C-8638..................... 218 4C-9659..................... 195 4C-9942..................... 184 5P-2909..................... 282
4C-8648..................... 417 4C-9660..................... 195 4C-9943..................... 184 5P-3011..................... 250
4C-8650..................... 417 4C-9662..................... 195 4C-9944..................... 184 5P-3012............... 250, 252
4C-8733..................... 173 4C-9663..................... 195 4C-9945..................... 184 5P-3013..................... 250
4C-8996..................... 108 4C-9664..................... 195 4C-9946..................... 183 5P-3038..................... 108
4C-9442..................... 307 4C-9665..................... 195 4D-0514 .................... 284 5P-3053.......................93
4C-9448..................... 307 4C-9681..................... 269 4F-5166 ..................... 162 5P-3054.......................93
4C-9463..................... 307 4C-9682............... 268–269 4J-4382..................... 283 5P-3277.................19, 172
4C-9464..................... 307 4C-9683............... 268–269 4J-7533..................... 283 5P-3320..................... 284
4C-9465..................... 307 4C-9684..................... 269 4K-1388..................... 283 5P-3534............... 113–114
4C-9466..................... 307 4C-9685............... 268–269 4S-7326.......................61 5P-3540..................... 111
448
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
5P-3579.......................94 6K-0806..................... 405 6V-6045..................... 192 6V-9101......... 22, 24–25, 31
5P-3580.......................94 6K-6307..................... 283 6V-6067..................... 430 6V-9102......... 22, 24–25, 31
5P-3581.......................94 6V-0006..................... 152 6V-6068..................... 430 6V-9103......... 22, 24–25, 31
5P-3588..................... 115 6V-0024.......................94 6V-6096..................... 193 6V-9104............. 22, 25, 31
5P-3920.......................19 6V-0094..................... 115 6V-6105..................... 193 6V-9110.................71, 100
5P-3931..................... 421 6V-0115.......................47 6V-6107..................... 193 6V-9111....... 22, 25, 71, 100
5P-3975..................... 425 6V-0185..................... 210 6V-6126..................... 193 6V-9112....... 22–23, 71, 100
5P-4205.......................47 6V-0186......... 210, 212–213 6V-6192....... 14, 18, 22, 151 6V-9113....... 22, 25, 71, 101
5P-4238............... 253–254 6V-0199.................. 65, 87 6V-6193...... 14, 18, 151–152 6V-9114............ 23, 71, 101
5P-4299..................... 282 6V-0852..................... 366 6V-6194...... 14, 18, 151–152 6V-9115.................71, 101
5P-4724..................... 191 6V-1897..................... 284 6V-6195............ 14, 18, 152 6V-9116........ 22–23, 25, 71,
5P-4996..................... 282 6V-2002.......................94 6V-7013..................... 181 101
5P-5148..................... 405 6V-2010..................... 233 6V-7052..................... 254 6V-9117..................... 102
5P-5195.......................50 6V-2032............... 222–223 6V-7067..................... 206 6V-9118.................23, 102
5P-5197..................... 153 6V-2033..................... 223 6V-7091..................... 206 6V-9119.................23, 102
5P-5249..................... 110 6V-2062..................... 153 6V-7092..................... 206 6V-9120.................23, 102
5P-6587..................... 111 6V-2091..................... 252 6V-7093..................... 206 6V-9124..................... 148
5P-6588..................... 111 6V-2104.......................47 6V-7094..................... 206 6V-9449..................... 192
5P-6589..................... 111 6V-2123..................... 108 6V-7095..................... 206 6V-9451..................... 140
5P-7253..................... 106 6V-3000..................... 321 6V-7096..................... 206 6V-9454..................... 140
5P-7254.......................50 6V-3001..................... 321 6V-7145..................... 192 6V-9455..................... 140
5P-7255.......................50 6V-3007............... 194, 321 6V-7494..................... 287 6V-9456..................... 140
5P-7256.......................50 6V-3008..................... 321 6V-7496..................... 287 6V-9507..................... 282
5P-7320.......................51 6V-3017..................... 306 6V-7555..................... 405 6V-9508..................... 282
5P-7414..................... 177 6V-3018..................... 306 6V-7874.................93, 103 6V-9509..................... 282
5P-7429..................... 137 6V-3019..................... 306 6V-7932....... 14, 18, 20, 22– 6V-9510..................... 282
5P-7443.......................61 6V-3020..................... 306 23, 25, 147–148 6V-9511..................... 282
5P-7444.......................61 6V-3021..................... 306 6V-7933......14, 18, 24, 147– 6V-9512..................... 282
5P-7445.......................61 6V-3022..................... 306 148 6V-9513..................... 282
5P-7684..................... 283 6V-3023..................... 306 6V-7934....... 14, 18–20, 23– 7B-9665 .................... 284
5P-8676..................... 113 6V-3025..................... 306 24, 26, 147–148 7E-8716............... 281, 287
5P-8937..................... 421 6V-3044..................... 235 6V-7935........ 14, 18–19, 21, 7F-9504 ..................... 284
5P-9709............... 210, 212 6V-3072..................... 192 26, 147–148 7H-3171 .................... 284
5P-9718......... 210, 212–213 6V-3073..................... 192 6V-7936...... 15, 18, 147–148 7J-0204..................... 283
5S-6076.................58, 113 6V-3112..................... 192 6V-7937...... 15, 18, 147–148 7K-1181..................... 405
5S-6077.................. 58, 94 6V-3146..................... 139 6V-7938.................15, 148 7L-2505 ..................... 284
5S-6078.................. 58, 94 6V-3182..................... 206 6V-7939..................... 318 7M-7410.................... 284
5S-6079.................. 58, 94 6V-3183..................... 206 6V-9074..................... 273 7M-7809.................... 111
5S-6080.................. 58, 94 6V-3280..................... 284 6V-9076..................... 273 7M-8485.................... 283
5S-6081............. 58, 61, 94 6V-4058..................... 113 6V-9082............... 269, 273 7N-0296 .................... 432
5S-6082.................. 58, 94 6V-4086............... 214, 224 6V-9083......... 268–269, 273 7N-7777 .................... 321
5S-6083.................. 58, 94 6V-4087..................... 224 6V-9086..................... 107 7N-7778 .................... 321
5S-6084.................. 58, 94 6V-4094..................... 192 6V-9090......... 23, 26, 29–31 7N-7779 .................... 321
5S-6085.................. 58, 94 6V-4154..................... 139 6V-9091.................. 29–31 7N-7780 .................... 321
5S-6086.................. 58, 95 6V-4165..................... 138 6V-9092.................. 29–31 7N-7781 .................... 321
5S-6087.................. 58, 94 6V-4166..................... 138 6V-9093......... 23, 26, 29–31 7N-7782 .................... 321
5S-6088.......................58 6V-4167..................... 138 6V-9094.................. 29–31 7N-8204 .................... 321
5S-6089............. 58, 62–63 6V-4168..................... 138 6V-9095.................. 29–31 7N-8205 .................... 321
5S-6090.................. 58, 63 6V-4169..................... 138 6V-9096........ 22, 24–25, 27, 7N-9737 .................... 321
5S-6091.......................61 6V-4170..................... 139 29–31 7N-9738 .................... 321
5S-6092.................58, 191 6V-4171..................... 138 6V-9097............. 23, 29–31 7S-7093..................... 252
5S-6093.......................58 6V-4175.......................94 6V-9098........ 22, 24–25, 27, 7X-1062..................... 432
5S-6094.......................61 6V-4802..................... 238 29–31 7X-3387..................... 366
6F-6946 ..................... 181 6V-4873..................... 192 6V-9099....... 22–25, 27, 29– 8C-3345..................... 366
6F-6947 ..................... 181 6V-6035..................... 176 31 8C-3445..................... 366
6H-7378 ......................43 6V-6044..................... 192 6V-9100.......................31 8C-3446..................... 366
449
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
8C-3447..................... 366 8H-8556 ...... 13, 17, 19, 21– 8S-1598.................. 14, 92 8T-3068 ..................... 253
8C-3451..................... 366 22, 56, 89 8S-1599.................. 14, 92 8T-3069 ..................... 253
8C-4424..................... 285 8H-8557 ......................61 8S-1600.................. 14, 92 8T-3070 ..................... 254
8C-8456..................... 366 8H-8559 ....... 13, 17, 19–23, 8S-1601.................. 14, 92 8T-3071 ..................... 253
8F-2239 .......................49 57, 113, 182 8S-2257..................... 408 8T-3072 ..................... 253
8F-2243 .......................39 8H-8560 ................13, 115 8S-2274......... 12, 16, 56, 87 8T-3073 ..................... 253
8F-2246 .......................39 8H-8561 .............. 115, 182 8S-2284............. 16, 81, 86 8T-3074 ..................... 254
8F-4675 ..................... 139 8H-8562 ....... 12–13, 16, 81, 8S-2357.................. 65, 87 8T-3075 ..................... 253
8F-4677 ..................... 139 86 8S-5128..................... 193 8T-3076 ..................... 253
8F-4678 ..................... 139 8H-8563 ........ 12, 16, 81, 86 8S-5131..................... 139 8T-3077 ..................... 253
8F-5574 ..................... 273 8H-8564 ........ 12, 16, 81, 86 8S-6034..................... 273 8T-3078 ..................... 254
8F-5575 ..................... 273 8H-8565 ........ 12, 16, 81, 86 8S-6400..................... 273 8T-3079 ..................... 256
8F-5577 ..................... 273 8H-8566 ........ 12, 16, 81, 87 8S-6402..................... 273 8T-3080 ..................... 256
8F-9866 ............ 19–27, 144 8H-8567 ........ 12, 16, 56, 87 8T-0460 .................. 12, 15 8T-3081 ..................... 256
8H-8423 ............ 14, 27, 31 8H-8568 ........ 12, 16, 56, 87 8T-0461 .................. 15, 19 8T-3082 ..................... 256
8H-8424 ............ 14, 22, 31 8H-8569 ........ 12, 16, 56, 87 8T-0832 ..................... 161 8T-3083 ..................... 256
8H-8501 ............ 14, 17, 48 8H-8570 ........ 12, 16, 56, 87 8T-0833 .......................50 8T-3084 ..................... 256
8H-8502 ................. 30–31 8H-8571 ........ 12, 16, 56, 87 8T-0841 ..................... 192 8T-3085 ..................... 256
8H-8504 ............ 13, 57, 92 8H-8573 ........ 12, 16, 56, 63 8T-0886 .......................27 8T-3086 ............... 256, 277
8H-8516 ................. 14, 31 8H-8574 ...... 12, 16, 56, 113 8T-2692 ............... 268–269 8T-3087 ..................... 256
8H-8517 ............ 14, 27, 31 8H-8575 ....... 12, 16, 27, 56, 8T-2695 ............... 268–269 8T-3088 ..................... 256
8H-8518 ................. 14, 31 113 8T-2698 ............... 268–269 8T-3089 ............... 256, 277
8H-8519 ................. 14, 31 8H-8576 ...... 12, 16, 27, 115 8T-2706 ............... 268–269 8T-3090 ..................... 256
8H-8520 ............ 14, 27, 31 8H-8577 ...... 15, 22, 25, 158 8T-2712 ..................... 269 8T-3091 ..................... 256
8H-8529 ............ 13, 57, 92 8H-8578 ........... 15, 18, 161 8T-2715 ..................... 268 8T-3092 ..................... 256
8H-8530 ............ 13, 57, 92 8H-8579 ................. 15, 18 8T-2718 ..................... 268 8T-3093 ..................... 256
8H-8531 ............ 13, 57, 92 8H-8580 ........... 15, 18, 182 8T-2721 ..................... 268 8T-3094 ..................... 256
8H-8532 ............ 13, 57, 92 8H-8581 ...... 15, 18–20, 22– 8T-2727 ............... 268–269 8T-3095 ..................... 256
8H-8533 ............ 13, 57, 92 24, 175 8T-2730 ............... 268–269 8T-3096 ..................... 256
8H-8534 ............ 13, 57, 92 8L-8413 ..................... 405 8T-2742 ............... 268–269 8T-3120 .......................34
8H-8535 ............ 13, 57, 92 8M-8292.................... 273 8T-2748 ..................... 269 8T-3121 ............... 269–270
8H-8536 ........ 13, 20, 57, 92 8S-1346..................... 261 8T-2751 ..................... 269 8T-3122 .......................34
8H-8537 ........ 13, 20, 57, 92 8S-1347..................... 261 8T-2760 ..................... 269 8T-3123 .......................34
8H-8538 ........ 13, 20, 57, 92 8S-1364..................... 261 8T-2763 ..................... 270 8T-3124 .......................34
8H-8539 ............ 13, 57, 92 8S-1365..................... 261 8T-2772 ..................... 270 8T-3125 .......................34
8H-8540 ............ 13, 57, 92 8S-1366..................... 261 8T-2775 ..................... 270 8T-3126 .......................34
8H-8541 ........ 13, 20, 57, 92 8S-1368..................... 261 8T-2784 ............... 269–270 8T-3127 .......................34
8H-8542 ............ 13, 57, 92 8S-1369..................... 261 8T-2790 ......... 269–270, 273 8T-3128 .......................34
8H-8543 ............ 13, 57, 92 8S-1370..................... 261 8T-2793 ............... 269–270 8T-3129 .......................34
8H-8544 ............ 13, 57, 92 8S-1371..................... 261 8T-2796 ..................... 270 8T-3130 .......................34
8H-8545 ......................61 8S-1372..................... 261 8T-2799 ............... 270, 273 8T-3131 .......................34
8H-8546 ........ 13, 23, 58, 62 8S-1373..................... 261 8T-2801 ..................... 271 8T-3132 .......................34
8H-8548 ...... 13, 23, 57, 113 8S-1374..................... 261 8T-2802 ..................... 271 8T-3133 .......................34
8H-8549 ....... 12, 16, 19–22, 8S-1375..................... 261 8T-2998 ..................... 424 8T-3134 .......................34
56, 89 8S-1376..................... 261 8T-3041 .................71, 100 8T-3135 .......................34
8H-8550 ........ 12, 16, 56, 89 8S-1377..................... 261 8T-3042 ..................... 106 8T-3136 .......................34
8H-8551 ....... 12, 16, 20, 56, 8S-1378..................... 261 8T-3043 ..................... 106 8T-3137 .......................34
89 8S-1589............. 14, 16, 87 8T-3052 ..................... 141 8T-3138 .......................34
8H-8552 ....... 12, 17, 20–21, 8S-1590............. 14, 16, 87 8T-3054 ............... 214, 224 8T-3153 ..................... 193
56, 89 8S-1591.................. 14, 87 8T-3055 ..................... 224 8T-3196 .................51, 139
8H-8553 ....... 12, 17, 20, 56, 8S-1592.................. 14, 87 8T-3062 ..................... 253 8T-3227 .......................34
89 8S-1593.................. 14, 89 8T-3063 ..................... 253 8T-5182 .......................93
8H-8554 ....... 12, 17, 19–21, 8S-1594.................. 14, 90 8T-3064 ..................... 254 8T-5183 ..................... 113
56, 89 8S-1595.................. 14, 90 8T-3065 ..................... 253 8T-5209 ..................... 318
8H-8555 ....... 13, 17, 19–20, 8S-1596.................. 14, 90 8T-3066 ..................... 254 8T-5211 ..................... 318
56, 89 8S-1597.................. 14, 92 8T-3067 ..................... 253 8T-5212 ..................... 318
450
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
8T-5213 ..................... 318 9M-6593.................... 273 9S-3638..................... 276 9S-8002..................... 283
8T-5214 ..................... 318 9M-6595.................... 273 9S-3641..................... 277 9S-8003..................... 283
8T-5215 ..................... 318 9M-6596.................... 273 9S-3642..................... 277 9S-8004..................... 283
8T-5216 ..................... 318 9S-1711............. 15, 55, 86 9S-3643..................... 277 9S-8005..................... 283
8T-5217 ..................... 318 9S-1712............. 15, 55, 86 9S-3644..................... 277 9S-8006..................... 283
8T-5218 ..................... 318 9S-1713............. 15, 55, 86 9S-3645..................... 277 9S-8007..................... 283
8T-5219 ..................... 318 9S-1714............. 15, 55, 86 9S-3646..................... 277 9S-8008..................... 283
8T-5230 ..................... 110 9S-1715............. 15, 55, 86 9S-3647..................... 277 9S-8009..................... 283
8T-7696 ..................... 263 9S-1716............. 15, 55, 86 9S-3648..................... 276 9S-8010..................... 283
8T-7697 ..................... 263 9S-1717............. 15, 55, 86 9S-3651..................... 277 9S-8105..................... 193
8T-7698 ..................... 263 9S-1718............. 15, 55, 86 9S-3652..................... 277 9S-8895..................... 282
8T-7699 ..................... 263 9S-1719............. 15, 55, 86 9S-3653..................... 277 9S-8927..................... 282
8T-7748 ..................... 222 9S-1720............ 15, 55, 113 9S-3654..................... 277 9S-9149.......................50
8T-7751 ..................... 232 9S-1721....... 15, 55, 59, 113 9S-3655..................... 277 9S-9334..................... 283
8T-7752 ..................... 232 9S-1722.................. 15, 55 9S-3656..................... 277 9T-6322 ..................... 285
8T-7765 ..................... 232 9S-1724....... 16, 55, 59, 115 9S-3657..................... 277 9U-5006 .................... 137
8T-7766 ............... 232–233 9S-1725............ 16, 55, 191 9S-3658..................... 276 9U-5007 .................... 137
8T-7767 ..................... 223 9S-1727............. 16, 81, 86 9S-3674..................... 277 9U-5009 .................... 142
8T-7768 ......... 221, 223, 231 9S-1728............. 16, 56, 87 9S-3675..................... 276 9U-5010 .................... 142
8T-7769 ..................... 221 9S-1729............. 17, 56, 89 9S-3676..................... 276 9U-5011 .................... 142
8T-7792 ..................... 263 9S-1730........ 17, 19–20, 56, 9S-3677..................... 276 9U-5012 .................... 142
8T-7793 ..................... 263 90 9S-3678..................... 276 9U-5014 .................... 139
8T-7794 ..................... 263 9S-1731......... 17, 20, 56, 90 9S-3679..................... 276 9U-5015 .................... 139
8T-7795 ..................... 263 9S-1732....... 17, 19, 22, 24– 9S-3680..................... 276 9U-5017 .................... 138
8T-7876 ..................... 366 25, 57, 113 9S-3700..................... 276 9U-5019 .................... 137
8T-9110 ..................... 263 9S-1742.................. 18, 44 9S-4026..................... 115 9U-5020 .................... 137
8T-9174 .......................96 9S-1743.................. 18, 50 9S-4027..................... 115 9U-5027 .................... 418
8T-9175 .......................96 9S-1746.......................56 9S-4028..................... 115 9U-5029 .................... 418
8T-9201 ..................... 263 9S-1747.......................81 9S-4180..................... 283 9U-5030 .................... 418
8T-9202 ..................... 263 9S-1748.......................56 9S-4181..................... 283 9U-5031 .................... 427
8T-9208 ..................... 366 9S-1749.......................57 9S-4182..................... 283 9U-5032 .................... 427
8T-9265 ..................... 113 9S-2573.................. 16, 86 9S-4183..................... 283 9U-5053 .................... 277
8T-9287 ..................... 263 9S-3500..................... 276 9S-4185..................... 283 9U-5055 .................... 277
8T-9293 ..................... 137 9S-3509..................... 277 9S-4188..................... 283 9U-5057 .................... 277
9A-1593 .................... 264 9S-3510..................... 277 9S-4190..................... 283 9U-5059 .................... 277
9B-1496 ......................49 9S-3515..................... 277 9S-4191..................... 283 9U-5089 .................... 103
9F-2247 ..................... 284 9S-3618..................... 277 9S-5031.................. 65, 87 9U-5101 .................... 142
9F-2636 ..................... 144 9S-3619..................... 277 9S-5054..................... 277 9U-5121 .............. 271–272
9F-2637 ..................... 144 9S-3620..................... 277 9S-5056..................... 277 9U-5122 .............. 271–272
9F-3869 .......................49 9S-3621..................... 277 9S-5058..................... 277 9U-5123 .............. 271–272
9F-7143 ..................... 273 9S-3622..................... 277 9S-5060..................... 277 9U-5124 .............. 271–272
9F-9398 ............... 253–254 9S-3623..................... 277 9S-5518..................... 282 9U-5125 .................... 271
9F-9963 ..................... 111 9S-3624..................... 277 9S-6130..................... 283 9U-5130 ................. 30–31
9G-3667 .................... 322 9S-3625..................... 277 9S-6369.......................94 9U-5155 .................... 174
9G-3668 .................... 322 9S-3626..................... 277 9S-6370.......................94 9U-5177 .................... 273
9G-3669 .................... 321 9S-3627..................... 277 9S-6371.......................94 9U-5604 .................... 273
9G-3670 .................... 321 9S-3628..................... 277 9S-6372.......................94 9U-5614 .................... 263
9G-3671 .................... 321 9S-3629..................... 277 9S-6373.......................94 9U-5615 .................... 263
9G-3672 .................... 321 9S-3630..................... 277 9S-6374.......................94 9U-5784 .............. 299–300
9G-3673 .................... 322 9S-3631..................... 276 9S-6375.......................94 9U-5794 .................... 256
9G-3674 .................... 322 9S-3632..................... 276 9S-7351..................... 138 9U-5922 .................... 388
9G-3675 .................... 322 9S-3633..................... 276 9S-7352............... 138–140 9U-6009 .................... 312
9G-3676 .................... 321 9S-3634..................... 276 9S-7353............... 138–139 9U-6010 .................... 312
9G-3677 .................... 321 9S-3635..................... 276 9S-7354..................... 138 9U-6124 ......................82
9G-3678 .................... 321 9S-3636..................... 276 9S-7583..................... 283 9U-6125 ................. 82, 98
9G-3695 .................... 321 9S-3637..................... 276 9S-8001..................... 283 9U-6126 ................. 82, 98
451
Part Number Index
Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No.
9U-6127 ................. 82, 98 9U-6558 ......................95 9U-7070 .............. 281, 287 9U-7129 .................... 292
9U-6128 ................. 82, 98 9U-6559 ......................95 9U-7071 .............. 281, 287 9U-7130 .................... 292
9U-6129 ................. 82, 98 9U-6560 ......................95 9U-7072 .................... 287 9U-7131 .................... 292
9U-6130 ................. 82, 98 9U-6561 ......................95 9U-7073 .............. 281, 287 9U-7132 .................... 292
9U-6131 ................. 82, 98 9U-6562 ......................95 9U-7074 .............. 281, 287 9U-7133 .................... 292
9U-6132 ................. 82, 98 9U-6563 ......................95 9U-7075 .............. 281, 287 9U-7134 .................... 292
9U-6133 ................. 82, 99 9U-6564 ......................95 9U-7076 .............. 281, 287 9U-7135 .................... 292
9U-6182 .................... 182 9U-6565 ......................95 9U-7077 .............. 281, 287 9U-7136 .................... 289
9U-6219 ........... 22, 25, 190 9U-6566 ......................95 9U-7078 .............. 281, 287 9U-7137 .................... 289
9U-6282 .................... 139 9U-6567 ......................95 9U-7079 .............. 281, 287 9U-7138 .................... 289
9U-6362 .................... 320 9U-6568 ......................95 9U-7080 .............. 281, 287 9U-7139 .................... 289
9U-6363 .................... 320 9U-6569 ......................95 9U-7081 .............. 281, 287 9U-7140 .................... 289
9U-6364 .................... 320 9U-6570 ......................95 9U-7082 .............. 281, 287 9U-7141 .................... 289
9U-6366 .................... 320 9U-6571 ......................95 9U-7084 .................... 287 9U-7142 .................... 289
9U-6368 .................... 320 9U-6572 ......................95 9U-7085 .............. 281, 287 9U-7143 .................... 289
9U-6369 .................... 320 9U-6573 ......................95 9U-7086 .................... 287 9U-7144 .................... 289
9U-6374 .................... 317 9U-6574 ......................95 9U-7087 .............. 281, 287 9U-7145 .................... 289
9U-6378 .................... 317 9U-6575 ......................95 9U-7088 .............. 281, 287 9U-7146 .................... 289
9U-6379 .................... 317 9U-6576 ......................95 9U-7089 .............. 281, 287 9U-7147 .................... 289
9U-6382 .................... 227 9U-6577 ......................96 9U-7090 .............. 281, 287 9U-7148 .................... 289
9U-6383 .................... 226 9U-6578 ......................96 9U-7091 .............. 281, 287 9U-7149 .................... 289
9U-6503 .................... 256 9U-6579 ......................96 9U-7092 .................... 287 9U-7150 .................... 289
9U-6517 ......................35 9U-6580 ......................96 9U-7094 .................... 287 9U-7151 .................... 289
9U-6523 ................80, 103 9U-6581 ......................96 9U-7095 .................... 287 9U-7152 .................... 289
9U-6524 ................80, 103 9U-6582 ......................96 9U-7096 .................... 287 9U-7153 .................... 289
9U-6525 ................80, 103 9U-6583 ......................96 9U-7098 .................... 291 9U-7154 .................... 292
9U-6526 ................80, 103 9U-6584 ......................96 9U-7099 .................... 291 9U-7155 .................... 292
9U-6527 ................80, 103 9U-6635 ................. 59, 61 9U-7100 .................... 291 9U-7156 .................... 292
9U-6528 ................80, 103 9U-6636 ......................61 9U-7101 .................... 291 9U-7157 .................... 292
9U-6529 ................80, 103 9U-6637 ......................61 9U-7102 .................... 291 9U-7158 .................... 292
9U-6530 ................80, 103 9U-6638 ......................61 9U-7103 .................... 291 9U-7159 .................... 292
9U-6531 ................80, 103 9U-6639 ......................61 9U-7104 .................... 290 9U-7160 .................... 292
9U-6532 ................80, 103 9U-6640 ......................61 9U-7105 .................... 290 9U-7161 .................... 293
9U-6533 ................80, 103 9U-6708 .................... 312 9U-7106 .................... 290 9U-7162 .................... 293
9U-6534 ................80, 103 9U-6710 .................... 312 9U-7107 .................... 290 9U-7163 .................... 293
9U-6535 ................80, 103 9U-6712 .................... 312 9U-7108 .................... 290 9U-7164 .................... 293
9U-6536 ................80, 103 9U-6734 ......................96 9U-7109 .................... 290 9U-7165 .................... 293
9U-6537 ................80, 103 9U-6901 .................... 256 9U-7110 .................... 290 9U-7166 .................... 288
9U-6538 ................80, 103 9U-6902 .................... 256 9U-7111 .................... 290 9U-7167 .................... 288
9U-6539 ................80, 103 9U-6910 .................... 389 9U-7112 .................... 290 9U-7168 .................... 288
9U-6540 ................80, 103 9U-6911 .................... 389 9U-7113 .................... 290 9U-7169 .................... 288
9U-6541 ................80, 103 9U-6912 .................... 389 9U-7114 .................... 290 9U-7170 .................... 288
9U-6542 ................80, 103 9U-6919 .................... 422 9U-7115 .................... 290 9U-7171 .................... 288
9U-6543 ................80, 103 9U-6921 .................... 211 9U-7116 .................... 290 9U-7172 .................... 288
9U-6544 ................80, 103 9U-6922 .................... 211 9U-7117 .................... 290 9U-7173 .................... 288
9U-6545 ................80, 103 9U-6923 .................... 211 9U-7118 .................... 290 9U-7174 .................... 288
9U-6546 ................80, 103 9U-6924 .................... 211 9U-7119 .................... 290 9U-7175 .................... 288
9U-6548 ......................95 9U-6925 .................... 211 9U-7120 .................... 292 9U-7176 .................... 288
9U-6549 ......................95 9U-6926 .................... 211 9U-7121 .................... 292 9U-7177 .................... 288
9U-6550 ......................95 9U-6927 .................... 211 9U-7122 .................... 292 9U-7178 .................... 288
9U-6551 ......................95 9U-6928 .................... 214 9U-7123 .................... 292 9U-7179 .................... 288
9U-6552 ......................95 9U-6929 .................... 214 9U-7124 .................... 292 9U-7180 .................... 288
9U-6553 ......................95 9U-7042 .................... 389 9U-7125 .................... 292 9U-7181 .................... 288
9U-6554 ......................95 9U-7067 .............. 281, 287 9U-7126 .................... 292 9U-7182 .................... 288
9U-6555 ......................95 9U-7068 .............. 281, 287 9U-7127 .................... 292 9U-7183 .................... 288
9U-6557 ......................95 9U-7069 .............. 281, 287 9U-7128 .................... 292 9U-7184 .................... 288
452
 Part Number Index
Part.No. Page.No. Part.No. Page.No. Part.No. Page.No. Part.No. Page.No.
9U-7185 .................... 288 9U-7197 .................... 293 9U-7327 .................... 172 9U-7731 .................... 413
9U-7186 .................... 288 9U-7198 .................... 293 9U-7328 .................... 150 9U-7918 .................... 397
9U-7187 .................... 288 9U-7199 .................... 293 9U-7376 ......................51 9U-7920 .................... 397
9U-7188 .................... 288 9U-7200 .................... 293 9U-7377 .................... 264 9U-7921 .................... 397
9U-7189 .................... 288 9U-7201 .................... 293 9U-7418 .................... 107 9U-7922 .................... 397
9U-7190 .................... 288 9U-7202 .................... 293 9U-7419 ................. 21, 47 9U-7946 .................... 413
9U-7191 .................... 288 9U-7203 .................... 312 9U-7551 .................... 424 9U-7947 .................... 413
9U-7192 .................... 288 9U-7231 .................... 307 9U-7714 .................... 412 9U-7949 .................... 413
9U-7193 .................... 288 9U-7283 .................... 256 9U-7719 .................... 413 9U-7968 ................. 22, 25
9U-7194 .................... 288 9U-7290 .................... 147 9U-7720 .................... 413
9U-7195 .................... 293 9U-7291 .................... 148 9U-7725 .................... 413
9U-7196 .................... 293 9U-7326 .................... 172 9U-7726 .................... 413

453
 2016 Cat Hand Tools and Shop Supplies
®
2016 Cat Hand Tools and
®

https://dealer.cat.com/en/ps/parts/parts-mktg/st-hardware-supplies.html Shop Supplies

PECJ0003-07
www.cat.com
© 2016 Caterpillar, All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow” and the “Power Edge“ trade dress,
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

PECJ0003-06 cover 2015 gradient edit.indd 1 1/12/2016 8:49:38 AM