Two Ferrule Tube Fittings

316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.

valve & fitting

www.veelok.com
 tube fitting
■ Introduction
Vee-Lok tube fittings are designed to provide a leak-free
connection and applied in chemical, petrochemical, oil
refineries, shipbuilding, power generation and pulp and
papers. The double ferrule design is a mechanism used
for sealing and gripping tubing. Through the mechanical
advantage and geometry, the tube fitting can overcome
the variations in materials, wall thickness and hardness to
provide an excellent seal performance.

The tube fitting consists of four parts: body, front ferrule,

back ferrule and nut. The two ferrules separate sealing
and tube gripping function and achieve excellent leak-free
performance.

■ Features
When the nut is tightened, the back and front ferrules
move axially. The axial movement does not allow any
torque transfer from the fitting to tubing and the mechani-
cal properties of tubing are maintained. The front ferrule
creates a seal against the fitting body and on the tubing
outside diameter while the back ferrule axially advances
the front ferrule and radially provides an effective tube
grip.

■ Material
Vee-Lok twin ferrule tube fittings are made of 316 stain-
less steel and supplied in metric and imperial sizes from
6mm O.D. to 25mm O.D. and 1/8”O.D. to 1”O.D. Straight
fittings are machined from bar stock conforming to ASTM
A276, ASME SA479, ASTM A479 and shaped bodies
from forging ASME SA182 and ASTM A182.

■ Easy Reference
Heads of tables are differentiated with color below:
Identifies fractional size
Identifies metric size

■ Pressure Ratings
The pressure ratings of the Vee-Lok tube fittings are de- Note:
termined by the wall thicknesses of tubings on which they Material strength and allowable working pressure de-
are installed. The maximum working pressure of tubings crease as the temperature increases
are listed in MAWP Table on following page.

Two Ferrule Tube Fitting 1

 tube fitting
■ Temperature Ratings ■ Fractional Tubing
316 stainless steel: -321°F to 1200°F (-196°C to 649°C) Nominal Nominal
Tubing O.D. Min. Wall Tubing O.D. Min. Wall
Thickness Thickness
■ Tubing
1/8” 0.028” 1/2” 0.049”
In order to ensure reliable and leak-free installation, tub-
1/4” 0.028” 5/8” 0.065”
ing should be considered as one of fitting components.
5/16” 0.035” 3/4” 0.065”
3/8” 0.035” 1” 0.083”
■ Tubing Selection
Hardness ■ Metric Tubing
● The metal tubing must be softer than the fitting materi- Nominal Nominal
als. In general, it is recommended a fully annealed 304 Tubing O.D. Min. Wall Tubing O.D. Min. Wall
Thickness Thickness
or 316 stainless steel tubing meeting ASTM A269 or
equivalent with hardness Rockwell HRB80 or less to 6mm 0.8mm 16mm 1.5mm

work properly with VEE-LOK tube fittings. 8mm 1.0mm 18mm 1.5mm
10mm 1.0mm 20mm 1.8mm
Surface
12mm 1.0mm 22mm 2.0mm
● Tubing must have a smooth surface free from dirt,
scratches, weld seam and draw mark. 15mm 1.2mm 25mm 2.2mm

■ Temperature Derating
Ovality
● Do not force the tubing into the fitting when tubing is The working pressure varies depending on temperature.
The working pressure at various temperatures can be
oval or out of roundness. It may damage the fitting
obtained by multiplying the working pressure at ambient
sealing mechanism on nut, ferrules and body.
temperature (-20°F to 100°F or -29°C to 37°C) by the
temperature derating factor in the table below.
Wall thickness
Temperature (°F) 316 SS
●  emperature, pressure, vibration and shock conditions
T
100 1.00
must be considered when selecting the wall thickness.
A too thin wall may collapse and too thick wall may not 200 1.00

be properly deformed by ferrule action. 300 1.00

400 0.96
Tubing Handling 500 0.90
● Tubing ends should be capped to keep from dirts dur- 600 0.85
ing transportation and storage. 700 0.82
● Do use correct tube cutter to avoid excessive deforma- 800 0.79
tion. 900 0.78
1000 0.76
● Do deburr tube ends prior to installation.
1100 0.62
Use good quality tubing for the best performance.
1200 0.37
■ Example
■ Gas Application
To obtain the working pressure of 316SS 1/4”O.D. x 0.035”
Gases have very small molecules and can escape even
wall tube at 800°F
the most minute leak path because of surface imperfec-
tions. ● Working pressure of the above tubing at ambient tem-
perature: 5,100 psi
Do not use thin wall tubing for gas applications.
Heavier wall tubing resists the ferrule action more than ● Temperature derating factor at 800°F: 0.79
thin wall does. The minimum wall thickness for gas ● Working pressure at 800°F: 4,029 psi (from 5,100 psi
application is shown for reference. multiplied by 0.79)

■ HIGH PRESSURE APPLICATION

Due to the variation of tubing diameters, a common starting point is desirable. Therefore, with a wrench, snug up the nut
until the tubing will not turn by hand or move axially in the fitting. At this point, scribe or mark the nut on the fitting. Using
the scribe or mark on the nut to keep track of the turns, tighten the nut 1 1/4 turns while holding the body stationary with a
backup wrench. Only you can determine what is "high pressure"，or "high safety factor" service. Using "1 1/4 turns from
snug" merely does away with one variable because the ferrules are in definite contact with the tube when you start the
pull-up.
2 Two Ferrule Tube Fitting
 tube fitting
■ Maximum Allowable Working Pressure Table
Fully annealed austenitic type 304 or 316 seamless tubing ASTM A269 or ASTM A213, or equivalent. Tubing to be free
from dirt, scratches, weld seam, draw mark and suitable for bending and flaring. Recommended hardness: 80 HRB or
less.

Stainless Steel Tube Inch Size

Tube Wall Thickness in Inches
Tube O.D. (Inches)
0.035 0.049 0.065 0.083

1/8” 10,900

1/4” 5,100 7,500 10,200

Working Pressure in psig
5/16” 4,000 5,800 8,000

3/8” 3,300 4,800 6,500

1/2” 2,600 3,700 5,100 6,700

3/4” For gas service, applying 2,400 3,300 4,200

the wall thickness only on
7/8” outside of shade boundary 2,000 2,800 3,600

1” 2,400 3,100

Stainless Steel Tube Metric Size

Tube Wall Thickness in Millimeters
Tube O.D. (mm)
0.89 1.00 1.24 1.50 1.65 2.00 2.20

6 6,500 7,400 9,400 11,500 12,700

Working Pressure in psig
8 4,700 5,800 6,800 8,400 9,300

10 3,700 4,200 5,300 6,500 7,300

12 3,000 3,400 4,400 5,300 5,900 6,600 7,000

16 2,500 3,200 3,900 4,300 5,300 5,700

18 For gas service, applying 2,800 3,400 3,800 4,700 5,000

the wall thickness only on
20 outside of shade boundary 2,500 3,000 3,400 4,200 4,400

22 2,300 2,800 3,000 3,800 4,000

25 2,000 2,400 2,700 3,300 3,500

● A
 llowable stress of 20,000 psi between -20°F and 100°F (-29°C and 37°C) based on ultimate tensile strength 75,000 psi
● Based on minimum wall thickness and maximum O.D. allowable by ASTM A269

Note:
1. Pressure calculations are based on maximum O.D. and minimum wall thickness without allowance for cor-
rosion and erosion.
2. Figures shown are not for design purpose but for reference only. The accuracy of information here is not
liability of our company.

Two Ferrule Tube Fitting 3

 tube fitting
■ Identification of Metric Size ■ Installation Instructions
Metric tube fittings are machined with the stepped shoul- VEE-LOK two ferrule tube fittings are supplied finger tight
ders on the body and the hex nut for identification. The and ready for immediate use. A leak tight and mechani-
metric nut must not be used on fractional body, and vice cally safe installation is easily made by turning the nut
versa. 1.1/4 turns or 3/4 turn for a smaller size in 1/8” O.D.

Prior to installation, make sure to have tube end cut 90

degree and remove burrs from inside and outside tube
ends.

■ Sealing

Taper Thread
 PT, BSPT (BS21) and ISO7/1 taper threads must use a
N
thread sealant and proper lubrication to provide leak-free
connection and prevent from galling that is mostly com- 1. Insert well prepared tubing into VEE-LOK two ferrule
mon in stainless steel. tube fittings until tubing end is firmly seated on the
body shoulder.

ISO Parallel Thread

With ISO 228/1, BSPP (BS2779) parallel thread requires
a sealing washer. This seal may either be a metal (copper
is standard) gasket or a “Bonded Seal” (elastomer bond-
12
ed to a metal retaining washer). See 2 different seals 3 3/4 Turn
below. 9

1-1/4 Turn 6
Form A
No reverse angle is used. A self centering taper is used
at hex which centers a “Bonded” washer seal ( usually
metal and elastomer” to seal the surface surrounding the
female thread. 2. M
 ark the nut at position no.6 for identification of start-
ing point to count the number of turns.

3. W
 hen holding the fitting body with a wrench to prevent
the body from turning, tighten the nut with another
wrench 1.1/4 turns to position no.9.

Form B
A metal gasket (usually copper) gasket performs the seal- Note:
ing between the face of body and the surface surrounding
It is the responsibility of users to use the products
the female threads. for their specific application and adequately apply
sealant and lubrication to system installation.
Improper installation or intermixing components of
other manufacturers may cause personal injury or
property losses.

4 Two Ferrule Tube Fitting

 tube fitting
■ Ordering Information Fitting Name Designator
Example 1: Tube to Pipe ends Identifier Description
MC Male Connector
M MC 8- 4 BSPT BMC Bulkhead Male Connector
① ② ③ ④ ⑤
ME Male Elbow
① ”M” is prefixed to designate metric VEE-LOK tube fit- MRT Male Run Tee
tings. Fractional size remains blank.
MBT Male Branch Tee
② Name of Fitting (MC=Male Connector)
UT Union Tee
③ Tube O.D. Designator
U Union
④ Pipe Thread Designator
⑤ “ BSPT” or “BSPP” is to specify thread type. NPT RU Reducing Union
thread remains blank. BU Bulkhead Union
UE Union Elbow
Example 2: Tube to Tube ends
UC Union Cross
M U 6 FC Female Connector
① ② ③ BFC Bulkhead Female Connector

① ”M” is prefixed to designate metric VEE-LOK tube fit- FE Female Elbow

tings. FRT Female Run Tee
② Name of Fitting (U=Union) FBT Female Branch Tee
③ Tube O.D. Designator R Reducer
MA Male Adapter
Example 3: Tee & Cross
FA Female Adapter
In tee shown below, “1” and “2” are referred to as run and N Nut
“3” is referred to as branch.
BF Back Ferrule

1 2 FF Front Ferrule
P Plug
CP Cap

3 Tube O.D. Designator

Inch O.D. Identifier Metric O.D. Identifier
In cross shown below, “1” and “2” are referred to as run
1/8 1 6 6
and “3” and “4” are referred to as branch.
1/4 4 8 8
4
5/16 5 10 10
3/8 6 12 12
1 2 1/2 8 16 16
3/4 12 20 20
1 16 25 25
3

Pipe Thread Designator

Nominal Size 1/8” 1/4” 3/8” 1/2” 3/4” 1” Applicable Specifications
NPT 2 4 6 8 12 16 ANSI B1.20.1 (NPT)
BS 21(BSPT), ISO7/1,
ISO Tapered 2BSPT 4BSPT 6BSPT 8BSPT 12BSPT 16BSPT
JIS B0203(PT)
BS 2779 (BSPP),
ISO Parallel 2BSPP 4BSPP 6BSPP 8BSPP 12BSPP 16BSPP
DIN ISO 228/1, JIS B0202(PF)

Two Ferrule Tube Fitting 5

 tube fitting

Tube to Tube Union

General Information 01~04

Union Tee 19
Ordering Information 05 UT

Union 20
Tube to Male Pipe U

Male Connector 07~08 Reducing Union 21

MC RU

Bulkhead
Male Connector 09 Bulkhead Union 22
BMC BU

Male Elbow 10~11 Union Elbow 23

ME UE

Male Run Tee 12 Cross Union 24

MRT CU

Port Connector
Male Branch Tee 13
MBT
Reducer 25~26
R
Tube to Female Pipe

Male Adapter 27
Female Connector 14 MA
FC
Bulkhead Female Adapter 28
Female Connector 15 FA
BFC
Component

Female Elbow 16 Nut 29

FE N

Female Run Tee 17 Back Ferrule 30

FRT BF

Front Ferrule 31
Female Branch Tee 18 FF
FBT
Plug Cap 32
P CP
6 Two Ferrule Tube Fitting
 tube fitting

MALE CONNECTOR
F

316
BORE

VEE-LOK
L1 H
L

TUBE MALE
PART NO. L L1 H F BORE
O.D. THREAD
INCHES
1/16 1/16 MC1-1 0.930 0.430 0.380 5/16 0.052
1/16 1/8 MC1-2 1.030 0.430 0.380 7/16 0.052
1/16 1/4 MC1-4 1.230 0.430 0.560 9/16 0.052
1/8 1/8 MC2-2 1.204 0.594 0.381 7/16 0.094
1/8 1/4 MC2-4 1.401 0.594 0.559 9/16 0.094
1/8 3/8 MC2-6 1.417 0.594 0.559 11/16 0.094
1/8 1/2 MC2-8 1.669 0.594 0.751 7/8 0.094
1/4 1/8 MC4-2 1.293 0.697 0.381 1/2 0.196
1/4 1/4 MC4-4 1.494 0.697 0.559 9/16 0.196
1/4 3/8 MC4-6 1.514 0.697 0.559 11/16 0.196
1/4 1/2 MC4-8 1.762 0.697 0.751 7/8 0.196
1/4 3/4 MC4-12 1.825 0.697 0.751 1-1/16 0.196
5/16 1/8 MC5-2 1.336 0.730 0.381 9/16 0.196
5/16 1/4 MC5-4 1.525 0.730 0.559 9/16 0.255
5/16 3/8 MC5-6 1.513 0.730 0.559 11/16 0.255
3/8 1/8 MC6-2 1.380 0.758 0.381 5/8 0.196
3/8 1/4 MC6-4 1.569 0.758 0.559 5/8 0.279
3/8 3/8 MC6-6 1.569 0.758 0.559 11/16 0.279
3/8 1/2 MC6-8 1.821 0.758 0.751 7/8 0.279
3/8 3/4 MC6-12 1.864 0.758 0.751 1-1/16 0.279
1/2 1/8 MC8-2 1.518 0.857 0.381 13/16 0.196
1/2 1/4 MC8-4 1.700 0.857 0.559 13/16 0.279
1/2 3/8 MC8-6 1.700 0.857 0.559 13/16 0.374
1/2 1/2 MC8-8 1.920 0.857 0.751 7/8 0.409
1/2 3/4 MC8-12 1.979 0.857 0.751 1-1/16 0.409
1/2 1 MC8-16 2.262 0.857 0.940 1-3/8 0.409
5/8 3/8 MC10-6 1.707 0.865 0.559 1-5/16 0.374
5/8 1/2 MC10-8 1.928 0.865 0.751 1-5/16 0.468
5/8 3/4 MC10-12 1.987 0.865 0.751 1-1/16 0.500
3/4 1/2 MC12-8 1.983 0.857 0.751 1-1/16 0.468
3/4 3/4 MC12-12 1.983 0.857 0.751 1-1/16 0.610
3/4 1 MC12-16 2.270 0.857 0.940 1-3/8 0.610
1 1/2 MC16-8 2.264 1.043 0.751 1-3/8 0.468
1 3/4 MC16-12 2.264 1.043 0.751 1-3/8 0.610
1 1 MC16-16 2.453 1.043 0.940 1-3/8 0.866

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 7
 tube fitting

MALE CONNECTOR
F

316
BORE

VEE-LOK
L1 H
L

TUBE MALE
PART NO. L L1 H F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MMC6-2 33.10 17.80 9.50 14 5.00
6 1/4 MMC6-4 38.40 17.80 14.20 14 5.00
6 3/8 MMC6-6 38.50 17.80 14.20 18 5.00
6 1/2 MMC6-8 44.80 17.80 19.10 22 5.00
8 1/8 MMC8-2 34.10 18.50 9.50 15 5.00
8 1/4 MMC8-4 38.70 18.50 14.20 15 6.50
8 3/8 MMC8-6 39.20 18.50 14.20 18 6.50
8 1/2 MMC8-8 45.50 18.50 19.10 22 6.50
10 1/8 MMC10-2 36.40 19.60 9.50 18 5.00
10 1/4 MMC10-4 41.00 19.60 14.20 18 7.10
10 3/8 MMC10-6 41.00 19.60 14.20 18 7.90
10 1/2 MMC10-8 46.60 19.60 19.10 22 7.90
10 3/4 MMC10-12 46.60 19.60 19.10 27 7.90
12 1/4 MMC12-4 43.21 21.81 14.20 22 7.10
12 3/8 MMC12-6 43.21 21.81 14.20 22 9.50
12 1/2 MMC12-8 48.81 21.81 19.10 22 9.50
12 3/4 MMC12-12 50.31 21.81 19.10 27 9.50
14 1/4 MMC14-4 44.00 21.81 14.20 24 7.10
14 3/8 MMC14-6 44.00 21.81 14.20 24 9.50
14 1/2 MMC14-8 48.80 21.81 19.10 24 11.10
15 1/2 MMC15-8 48.80 21.81 19.10 24 11.90
16 3/8 MMC16-6 44.00 21.81 14.20 24 9.50
16 1/2 MMC16-8 48.80 21.81 19.10 24 11.90
16 3/4 MMC16-12 50.40 21.81 19.10 27 12.70
18 1/2 MMC18-8 50.40 21.81 19.10 27 11.90
18 3/4 MMC18-12 50.40 21.81 19.10 27 15.00
20 1/2 MMC20-8 52.10 21.83 19.10 30 11.90
20 3/4 MMC20-12 52.10 21.83 19.10 30 15.50
22 3/4 MMC22-12 52.10 21.81 19.10 30 15.50
25 1/2 MMC25-8 57.80 26.76 19.10 35 11.90
25 3/4 MMC25-12 58.06 26.76 19.10 35 15.50
25 1 MMC25-16 63.06 26.76 23.90 35 22.00

Dimensions for reference only, subject to change without prior notice

8 Two Ferrule Tube Fitting

 tube fitting

BULKHEAD MALE CONNECTOR

F

316
BORE

VEE-LOK
L1 H
L

TUBE MALE Panel Hole Max. Panel

PART NO. L L1 H F BORE
O.D. THREAD Size Thick.
INCHES
1/16 1/16 BMC1-1 1.190 0.68 0.38 5/16 13/64 0.12 0.052
1/16 1/8 BMC1-2 1.270 0.68 0.38 7/16 13/64 0.12 0.052
1/8 1/8 BMC2-2 1.830 1.23 0.38 1/2 21/64 0.50 0.09
1/4 1/8 BMC4-2 1.950 1.31 0.38 5/8 29/64 0.40 0.20
1/4 1/4 BMC4-4 2.132 1.31 0.56 5/8 29/64 0.40 0.20
3/8 1/4 BMC6-4 2.265 1.44 0.56 3/4 37/64 0.44 0.28
3/8 3/8 BMC6-6 2.265 1.44 0.56 3/4 37/64 0.44 0.28
3/8 1/2 BMC6-8 2.480 1.44 0.75 7/8 37/64 0.44 0.28
1/2 3/8 BMC8-6 2.494 1.65 0.56 15/16 49/64 0.50 0.38
1/2 1/2 BMC8-8 2.712 1.65 0.75 15/16 49/64 0.50 0.41
3/4 3/4 BMC12-12 3.000 1.87 0.75 1-3/16 1-1/64 0.66 0.61
1 1 BMC16-16 3.720 2.27 0.94 1-5/8 1-21/64 0.75 0.86

TUBE MALE Panel Hole Max. Panel

PART NO. L L1 H F BORE
O.D. THREAD Size Thick.
MILLIMETERS
6 1/8 MBMC6-2 49.60 33.70 9.50 16 11.50 10.20 5.00
6 1/4 MBMC6-4 53.50 33.70 14.30 16 11.50 10.20 5.00
8 1/8 MBMC8-2 52.30 36.00 9.50 18 13.10 11.20 6.50
8 1/4 MBMC8-4 57.50 36.00 14.30 18 13.10 11.20 7.90
10 1/4 MBMC10-4 58.40 37.00 14.30 22 16.30 11.20 7.90
10 3/8 MBMC10-6 58.40 37.00 14.30 22 16.30 11.20 7.90
10 1/2 MBMC10-8 63.10 37.00 19.00 22 16.30 11.20 7.90
12 1/4 MBMC12-4 63.30 10.10 14.30 24 19.50 12.70 7.10
12 3/8 MBMC12-6 64.50 10.10 14.30 24 19.50 12.70 9.50
12 1/2 MBMC12-8 67.50 10.10 19.00 24 19.50 12.70 9.50

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 9

 tube fitting

MALE ELBOW L1
F

316
VEE-LOK

L2
H
BORE

TUBE MALE
PART NO. L1 L2 H F BORE
O.D. THREAD
INCHES
1/16 1/16 ME1-1 0.75 0.71 0.38 1/2 0.052
1/16 1/8 ME1-2 0.75 0.71 0.38 1/2 0.052
1/8 1/8 ME2-2 1.07 0.70 0.38 1/2 0.09
1/8 1/4 ME2-4 1.07 0.95 0.56 1/2 0.09
1/4 1/8 ME4-2 1.08 0.70 0.38 1/2 0.20
1/4 1/4 ME4-4 1.08 0.95 0.56 1/2 0.20
1/4 3/8 ME4-6 1.16 1.10 0.56 5/8 0.20
1/4 1/2 ME4-8 1.31 1.35 0.75 13/16 0.20
5/16 1/8 ME5-2 1.14 0.77 0.38 9/16 0.20
5/16 1/4 ME5-4 1.14 1.01 0.56 9/16 0.25
3/8 1/8 ME6-2 1.20 0.79 0.38 5/8 0.20
3/8 1/4 ME6-4 1.20 0.97 0.56 5/8 0.28
3/8 3/8 ME6-6 1.20 1.10 0.56 5/8 0.28
3/8 1/2 ME6-8 1.36 1.35 0.75 13/16 0.28
3/8 3/4 ME6-12 1.48 1.50 0.75 1 0.28
1/2 1/4 ME8-4 1.44 1.15 0.56 13/16 0.28
1/2 3/8 ME8-6 1.44 1.15 0.56 13/16 0.38
1/2 1/2 ME8-8 1.44 1.35 0.75 13/16 0.41
1/2 3/4 ME8-12 1.58 1.51 0.75 1 0.41
5/8 3/8 ME10-6 1.60 1.31 0.56 1 0.38
5/8 1/2 ME10-8 1.60 1.50 0.75 1 0.47
5/8 3/4 ME10-12 1.60 1.51 0.75 1 0.50
3/4 1/2 ME12-8 1.60 1.50 0.75 1 0.47
3/4 3/4 ME12-12 1.60 1.51 0.75 1 0.61
1 3/4 ME16-12 1.99 1.81 0.75 1-3/8 0.61
1 1 ME16-16 1.99 1.89 0.94 1-3/8 0.86

Dimensions for reference only, subject to change without prior notice

10 Two Ferrule Tube Fitting

 tube fitting

MALE ELBOW L1
F

316
VEE-LOK

L2
H
BORE

TUBE MALE
PART NO. L1 L2 H F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MME6-2 27.20 17.70 9.70 1/2 5.00
6 1/4 MME6-4 27.20 24.10 14.20 1/2 5.00
6 3/8 MME6-6 29.50 28.00 14.20 5/8 5.00
6 1/2 MME6-8 33.20 34.20 19.00 13/16 5.00
8 1/8 MME8-2 29.00 19.70 9.70 9/16 5.00
8 1/4 MME8-4 29.00 25.80 14.20 9/16 6.50
8 3/8 MME8-6 29.75 28.00 14.20 5/8 6.50
8 1/2 MME8-8 35.40 34.20 19.10 13/16 6.50
10 1/8 MME10-2 31.50 22.10 9.70 11/16 5.00
10 1/4 MME10-4 31.50 26.60 14.20 11/16 7.10
10 3/8 MME10-6 31.50 26.60 14.20 11/16 7.90
10 1/2 MME10-8 34.40 34.20 19.00 13/16 7.90
12 1/4 MME12-4 36.60 29.10 14.20 13/16 7.10
12 3/8 MME12-6 36.60 29.10 14.20 13/16 9.50
12 1/2 MME12-8 36.60 34.20 19.00 13/16 9.50
12 3/4 MME12-12 40.20 38.40 19.00 1 9.50
15 1/2 MME15-8 40.50 38.00 19.00 1 11.90
16 3/8 MME16-6 40.50 33.40 14.20 1 9.50
16 1/2 MME16-8 40.50 38.00 19.00 1 11.90
16 3/4 MME16-12 40.50 38.40 19.00 1 12.70
18 1/2 MME18-8 40.50 38.00 19.00 1 11.90
18 3/4 MME18-12 40.50 38.40 19.00 1 15.00
20 1/2 MME20-8 47.50 46.00 19.00 1-3/8 11.90
20 3/4 MME20-12 47.50 46.00 19.00 1-3/8 16.00
22 3/4 MME22-12 47.50 46.00 19.00 1-3/8 16.00
25 3/4 MME25-12 50.70 46.00 19.00 1-3/8 16.00
25 1 MME25-16 50.71 48.00 23.90 1-3/8 22.00

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 11

 tube fitting

MALE RUN TEE L1 L2

H
F

316
BORE

VEE-LOK

L1
316 VEE-LOK

TUBE MALE
PART NO. L1 L2 H F BORE
O.D. THREAD
INCHES
1/8 1/8 MRT2-2 1.09 0.71 0.38 1/2 0.09
1/8 1/4 MRT2-4 1.04 0.96 0.56 1/2 0.09
1/4 1/8 MRT4-2 1.07 0.72 0.38 1/2 0.20
1/4 1/4 MRT4-4 1.06 0.96 0.56 1/2 0.20
5/16 1/8 MRT5-2 1.16 0.82 0.38 5/8 0.20
3/8 1/4 MRT6-4 1.20 0.95 0.56 5/8 0.28
3/8 3/8 MRT6-6 1.18 1.11 0.56 5/8 0.28
1/2 3/8 MRT8-6 1.44 1.15 0.56 13/16 0.38
1/2 1/2 MRT8-8 1.44 1.40 0.75 7/8 0.41
5/8 1/2 MRT10-8 1.59 1.50 0.75 1-1/16 0.47
3/4 3/4 MRT12-12 1.59 1.50 0.75 1-1/16 0.61
1 3/4 MRT16-12 2.00 1.81 0.75 1-3/8 0.61
1 1 MRT16-16 2.00 1.89 0.94 1-3/8 0.86

TUBE MALE
PART NO. L1 L2 H F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MMRT6-2 27.20 18.30 9.70 1/2 5.00
6 1/4 MMRT6-4 26.70 24.30 14.20 1/2 5.00
8 1/8 MMRT8-2 29.50 20.80 9.70 5/8 5.00
8 1/4 MMRT8-4 29.50 24.70 14.20 5/8 6.50
10 1/4 MMRT10-4 31.60 26.40 14.20 11/16 7.10
10 1/2 MMRT10-8 34.40 35.30 19.00 7/8 7.90
12 1/4 MMRT12-4 36.60 29.10 14.20 13/16 7.10
12 3/8 MMRT12-6 36.60 29.10 14.20 13/16 9.50
12 1/2 MMRT12-8 36.60 35.50 19.00 7/8 9.50
16 1 MMRT16-16 47.90 48.00 23.90 1-3/8 12.70

Dimensions for reference only, subject to change without prior notice

12 Two Ferrule Tube Fitting

 tube fitting

MALE BRANCH TEE L

L1
F

316

VEE-LOK
VEE-LOK

316

L2
H
BORE

TUBE MALE
PART NO. L L1 L2 H F BORE
O.D. THREAD
INCHES
1/8 1/8 MBT2-2 2.18 1.09 0.71 0.38 1/2 0.09
1/8 1/4 MBT2-4 2.08 1.04 0.96 0.56 1/2 0.09
1/4 1/8 MBT4-2 2.14 1.07 0.72 0.38 1/2 0.20
1/4 1/4 MBT4-4 2.12 1.06 0.96 0.56 1/2 0.20
5/16 1/8 MBT5-2 2.32 1.16 0.82 0.38 5/8 0.20
3/8 1/4 MBT6-4 2.40 1.20 0.97 0.56 5/8 0.28
3/8 3/8 MBT6-6 2.36 1.18 1.11 0.56 5/8 0.28
1/2 3/8 MBT8-6 2.88 1.44 1.15 0.56 13/16 0.38
1/2 1/2 MBT8-8 2.88 1.44 1.40 0.75 7/8 0.41
5/8 1/2 MBT10-8 3.18 1.59 1.50 0.75 1-1/16 0.47
3/4 3/4 MBT12-12 3.18 1.59 1.50 0.75 1-1/16 0.61

TUBE MALE
PART NO. L L1 L2 H F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MMBT6-2 54.40 27.20 18.00 9.70 1/2 5.00
6 1/4 MMBT6-4 53.40 26.70 24.30 14.20 1/2 5.00
8 1/8 MMBT8-2 59.00 29.50 20.80 9.70 5/8 5.00
8 1/4 MMBT8-4 59.00 29.50 24.70 14.20 5/8 6.50
10 1/4 MMBT10-4 63.20 31.60 26.40 14.20 11/16 7.10
10 3/8 MMBT10-6 63.20 31.60 26.40 14.20 11/16 7.90
12 1/4 MMBT12-4 73.20 36.60 29.10 14.20 13/16 7.10
12 3/8 MMBT12-6 73.20 36.60 29.10 14.20 13/16 9.50
12 1/2 MMBT12-8 73.20 36.60 35.50 19.00 7/8 9.50
16 1/2 MMBT16-8 81.00 40.50 38.00 19.10 1-1/16 11.90

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 13

 tube fitting

FEMALE CONNECTOR F

316
VEE-LOK
L1
L

TUBE FEMALE
PART NO. L L1 F BORE
O.D. THREAD
INCHES
1/16 1/16 FC1-1 0.93 0.43 7/16 0.052
1/16 1/8 FC1-2 0.95 0.43 9/16 0.052
1/8 1/8 FC2-2 1.15 0.60 9/16 0.09
1/8 1/4 FC2-4 1.35 0.60 3/4 0.09
1/4 1/8 FC4-2 1.25 0.70 9/16 0.20
1/4 1/4 FC4-4 1.44 0.70 3/4 0.20
1/4 3/8 FC4-6 1.48 0.70 7/8 0.20
1/4 1/2 FC4-8 1.64 0.70 1-1/16 0.20
5/16 1/8 FC5-2 1.28 0.73 9/16 0.25
5/16 1/4 FC5-4 1.47 0.73 3/4 0.25
3/8 1/8 FC6-2 1.31 0.76 5/8 0.28
3/8 1/4 FC6-4 1.51 0.76 3/4 0.28
3/8 3/8 FC6-6 1.54 0.76 7/8 0.28
3/8 1/2 FC6-8 1.70 0.76 1-1/16 0.28
3/8 3/4 FC6-12 1.82 0.76 1-3/8 0.28
1/2 1/4 FC8-4 1.60 0.87 13/16 0.41
1/2 3/8 FC8-6 1.64 0.87 7/8 0.41
1/2 1/2 FC8-8 1.80 0.87 1-1/16 0.41
1/2 3/4 FC8-12 1.92 0.87 1-3/8 0.41
5/8 3/8 FC10-6 1.65 0.87 15/16 0.50
5/8 1/2 FC10-8 1.81 0.87 1-1/16 0.50
5/8 3/4 FC10-12 1.92 0.87 1-3/8 0.50
3/4 1/2 FC12-8 1.80 0.87 1-1/16 0.61
3/4 3/4 FC12-12 1.92 0.87 1-3/8 0.61
1 3/4 FC16-12 2.10 1.05 1-3/8 0.86
1 1 FC16-16 2.40 1.05 1-5/8 0.86

TUBE FEMALE
PART NO. L L1 F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MFC6-2 31.78 17.78 14 5.00
6 1/4 MFC6-4 36.78 17.78 19 5.00
6 3/8 MFC6-6 37.78 17.78 22 5.00
6 1/2 MFC6-8 41.78 17.78 27 5.00
8 1/8 MFC8-2 32.49 18.49 15 6.50
8 1/4 MFC8-4 37.49 18.49 19 6.50
8 3/8 MFC8-6 38.49 18.49 22 6.50
10 1/4 MFC10-4 38.60 19.60 19 7.90
10 3/8 MFC10-6 39.60 19.60 22 7.90
10 1/2 MFC10-8 43.60 19.60 27 7.90
12 1/4 MFC12-4 40.81 21.81 22 9.50
12 3/8 MFC12-6 41.81 21.81 22 9.50
12 1/2 MFC12-8 45.81 21.81 27 9.50
16 3/8 MFC16-6 41.81 21.81 24 9.50
16 1/2 MFC16-8 45.81 21.81 27 12.70
20 1/2 MFC20-8 47.83 21.83 30 16.00
20 3/4 MFC20-12 48.83 21.83 35 16.00
22 3/4 MFC22-12 48.81 21.81 35 18.00
25 3/4 MFC25-12 53.76 26.76 35 22.00
25 1 MFC25-16 61.26 26.76 41 22.00

Dimensions for reference only, subject to change without prior notice

14 Two Ferrule Tube Fitting
 tube fitting

BULKHEAD FEMALE CONNECTOR

F

316
VEE-LOK
L1
L

TUBE FEMALE Panel Hole Max. Panel

PART NO. L L1 F BORE
O.D. THREAD Size Thick.
INCHES
1/8 1/8 BFC2-2 1.76 1.23 9/16 21/64 0.50 0.09
1/4 1/8 BFC4-2 1.85 1.31 5/8 29/64 0.40 0.20
1/4 1/4 BFC4-4 2.04 1.31 3/4 29/64 0.40 0.20
3/8 1/4 BFC6-4 2.17 1.44 3/4 37/64 0.44 0.28
1/2 3/8 BFC8-6 2.43 1.65 15/16 49/64 0.50 0.41
1/2 1/2 BFC8-8 2.62 1.65 1-1/16 49/64 0.50 0.41

TUBE FEMALE Panel Hole Max. Panel

PART NO. L L1 F BORE
O.D. THREAD Size Thick.
MILLIMETERS
6 1/8 MBFC6-2 47.20 33.70 16 11.50 10.20 5.00
6 1/4 MBFC6-4 52.00 33.70 19 11.50 10.20 5.00
8 1/8 MBFC8-2 49.60 36.10 18 13.10 11.20 5.00
10 1/4 MBFC10-4 55.20 37.00 22 16.30 11.20 7.10
12 3/8 MBFC12-6 60.90 41.90 24 19.50 12.70 9.50
12 1/2 MBFC12-8 66.40 41.90 27 19.50 12.70 9.50

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 15

 tube fitting

FEMALE ELBOW
L1
F

316
VEE-LOK

L2
TUBE FEMALE
PART NO. L1 L2 F BORE
O.D. THREAD
INCHES
1/16 1/16 FE1-1 0.71 0.56 1/2 0.052
1/16 1/8 FE1-2 0.81 0.75 9/16 0.052
1/8 1/8 FE2-2 1.07 0.97 1/2 0.09
1/8 1/4 FE2-4 1.26 1.13 11/16 0.09
1/4 1/8 FE4-2 1.07 0.97 1/2 0.20
1/4 1/4 FE4-4 1.25 1.13 11/16 0.20
1/4 3/8 FE4-6 1.31 1.34 13/16 0.20
1/4 1/2 FE4-8 1.38 1.50 1 0.20
5/16 1/8 FE5-2 1.14 1.02 9/16 0.25
5/16 1/4 FE5-4 1.24 1.13 11/16 0.25
3/8 1/8 FE6-2 1.20 0.93 5/8 0.28
3/8 1/4 FE6-4 1.42 1.13 11/16 0.28
3/8 3/8 FE6-6 1.34 1.34 13/16 0.28
3/8 1/2 FE6-8 1.44 1.50 1 0.28
1/2 1/4 FE8-4 1.44 1.07 13/16 0.41
1/2 3/8 FE8-6 1.44 1.34 13/16 0.41
1/2 1/2 FE8-8 1.54 1.50 1 0.41
5/8 3/8 FE10-6 1.55 1.50 1 0.50
5/8 1/2 FE10-8 1.55 1.50 1 0.50
3/4 1/2 FE12-8 1.55 1.50 1 0.61
3/4 3/4 FE12-12 1.89 1.87 1-3/8 0.61
1 3/4 FE16-12 2.00 1.87 1-3/8 0.86

TUBE FEMALE
PART NO. L1 L2 F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MFE6-2 27.20 24.65 1/2 5.00
6 1/4 MFE6-4 31.70 28.80 11/16 5.00
8 1/4 MFE8-4 31.60 28.80 11/16 6.50
10 1/4 MFE10-4 31.90 28.80 11/16 7.90
10 3/8 MFE10-6 34.40 34.00 13/16 7.90
10 1/2 MFE10-8 36.80 38.00 1 7.90
12 1/4 MFE12-4 36.60 27.30 13/16 9.50
12 3/8 MFE12-6 36.60 34.00 13/16 9.50
12 1/2 MFE12-8 39.00 38.00 1 9.50
16 1/2 MFE16-8 39.30 38.00 1 12.70

Dimensions for reference only, subject to change without prior notice

16 Two Ferrule Tube Fitting

 tube fitting

FEMALE RUN TEE L1 L2

F

316
VEE-LOK

L1
316 VEE-LOK

TUBE FEMALE
PART NO. L1 L2 F BORE
O.D. THREAD
INCHES
1/8 1/8 FRT2-2 1.07 0.97 1/2 0.09
1/4 1/8 FRT4-2 1.07 0.97 1/2 0.20
1/4 1/4 FRT4-4 1.18 1.13 11/16 0.20
3/8 1/4 FRT6-4 1.23 1.13 11/16 0.28
1/2 3/8 FRT8-6 1.46 1.38 7/8" 0.38
1/2 1/2 FRT8-8 1.56 1.44 1-1/16 0.41
3/4 3/4 FRT12-12 1.89 1.87 1-3/8 0.61
1 3/4 FRT16-12 2.00 1.87 1-3/8 0.86

TUBE FEMALE
PART NO. L1 L2 F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MFRT6-2 27.20 24.70 1/2 5.00
6 1/4 MFRT6-4 29.80 28.80 11/16 5.00
8 1/8 MFRT8-2 29.50 24.00 5/8 6.50
10 1/4 MFRT10-4 31.60 28.80 11/16 7.90
12 1/4 MFRT12-4 36.60 27.30 13/16 9.50
12 3/8 MFRT12-6 37.20 35.00 7/8" 9.50
12 1/2 MFRT12-8 39.70 36.50 1-1/16 9.50
16 1/2 MFRT16-8 40.00 36.50 1-1/16 12.70

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 17

 tube fitting

FEMALE BRANCH TEE L

L1
F

316

VEE-LOK
VEE-LOK

316

L2
TUBE FEMALE
PART NO. L L1 L2 F BORE
O.D. THREAD
INCHES
1/8 1/8 FBT2-2 2.14 1.07 0.97 1/2 0.09
1/4 1/8 FBT4-2 2.14 1.07 0.97 1/2 0.20
1/4 1/4 FBT4-4 2.36 1.18 1.13 11/16 0.20
3/8 1/4 FBT6-4 2.46 1.23 1.13 11/16 0.28
1/2 1/4 FBT8-4 2.88 1.44 1.07 13/16 0.41
1/2 3/8 FBT8-6 2.92 1.46 1.38 7/8" 0.41
1/2 1/2 FBT8-8 3.12 1.56 1.44 1-1/16 0.41
5/8 1/2 FBT10-8 3.14 1.57 1.44 1-1/16 0.50
3/4 3/4 FBT12-12 3.78 1.89 1.87 1-3/8 0.61
1 3/4 FBT16-12 4.00 2.00 1.87 1-3/8 0.86

TUBE FEMALE
PART NO. L L1 L2 F BORE
O.D. THREAD
MILLIMETERS
6 1/8 MFBT6-2 54.40 27.20 24.70 1/2 5.00
6 1/4 MFBT6-4 60.00 30.00 28.80 11/16 5.00
8 1/8 MFBT8-2 59.00 29.50 24.00 5/8 6.50
10 1/4 MFBT10-4 64.00 32.00 28.80 11/16 7.90
12 1/4 MFBT12-4 73.20 36.60 27.30 13/16 9.50
12 3/8 MFBT12-6 74.40 37.20 35.00 7/8" 9.50
12 1/2 MFBT12-8 79.40 39.70 36.50 1-1/16 9.50
16 1/2 MFBT16-8 80.00 40.00 36.50 1-1/16 12.70

Dimensions for reference only, subject to change without prior notice

18 Two Ferrule Tube Fitting

 tube fitting

UNION TEE L
L1
F

316

VEE-LOK
VEE-LOK

316

L1
316 VEE-LOK

TUBE
PART NO. L L1 F BORE
O.D.
INCHES
1/16 UT1 1.42 0.71 1/2 0.052
1/8 UT2 2.14 1.07 1/2 0.09
1/4 UT4 2.14 1.07 1/2 0.20
5/16 UT5 2.32 1.16 5/8 0.25
3/8 UT6 2.40 1.20 5/8 0.28
1/2 UT8 2.88 1.44 13/16 0.41
5/8 UT10 3.14 1.57 1-1/16 0.50
3/4 UT12 3.14 1.57 1-1/16 0.61
1 UT16 4.00 2.00 1-3/8 0.70

TUBE
PART NO. L L1 F BORE
O.D.
MILLIMETERS
6 MUT6 54.40 27.20 1/2 5.00
8 MUT8 59.00 29.50 5/8 6.50
10 MUT10 63.20 31.60 11/16 7.90
12 MUT12 73.20 36.60 13/16 9.50
14 MUT14 80.00 40.00 1-1/16 11.10
15 MUT15 80.00 40.00 1-1/16 11.90
16 MUT16 80.00 40.00 1-1/16 12.70
18 MUT18 80.00 40.00 1-1/16 15.00
20 MUT20 95.00 47.50 1-3/8 16.00
22 MUT22 95.00 47.50 1-3/8 18.00
25 MUT25 101.40 50.70 1-3/8 22.00

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 19

 tube fitting

UNION F

316

VEE-LOK
VEE-LOK

316
L1 L1
L

TUBE
PART NO. L L1 F BORE
O.D.
INCHES
1/16 U1 0.99 0.43 5/16 0.052
1/8 U2 1.39 0.60 7/16 0.094
1/4 U4 1.62 0.70 1/2 0.196
5/16 U5 1.70 0.73 9/16 0.255
3/8 U6 1.77 0.76 5/8 0.279
1/2 U8 2.02 0.87 13/16 0.409
5/8 U10 2.05 0.87 15/16 0.500
3/4 U12 2.11 0.87 1-1/16 0.610
1 U16 2.57 1.05 1-3/8 0.866

TUBE
PART NO. L L1 F BORE
O.D.
MILLIMETERS
6 MU6 41.20 17.70 14 5.00
8 MU8 43.20 18.60 15 6.50
10 MU10 46.20 19.50 18 7.90
12 MU12 51.20 22.00 22 9.50
14 MU14 52.00 22.00 24 11.10
15 MU15 52.00 22.00 24 11.90
16 MU16 52.00 22.00 24 12.70
18 MU18 53.50 22.00 27 15.00
20 MU20 55.00 22.00 30 16.00
22 MU22 55.00 22.00 30 18.00
25 MU25 65.10 26.50 35 22.00

Dimensions for reference only, subject to change without prior notice

20 Two Ferrule Tube Fitting

 tube fitting

REDUCING UNION
F

316

VEE-LOK
T TX

VEE-LOK

316
L1 L2
L

T TX
TUBE TUBE PART NO. L L1 L2 F BORE
O.D. O.D.
INCHES
1/8 1/16 RU2-1 1.21 0.60 0.43 7/16 0.052
1/4 1/16 RU4-1 1.38 0.70 0.43 1/2 0.052
1/4 1/8 RU4-2 1.52 0.97 0.70 1/2 0.09
5/16 1/8 RU5-2 1.58 1.03 0.73 9/16 0.09
5/16 1/4 RU5-4 1.67 1.08 0.73 9/16 0.20
3/8 1/8 RU6-2 1.61 1.06 0.76 5/8 0.09
3/8 1/4 RU6-4 1.71 1.13 0.76 5/8 0.20
3/8 5/16 RU6-5 1.75 1.16 0.76 5/8 0.25
1/2 1/8 RU8-2 1.75 1.09 0.87 13/16 0.09
1/2 1/4 RU8-4 1.85 1.16 0.87 13/16 0.20
1/2 3/8 RU8-6 1.91 1.22 0.87 13/16 0.28
5/8 3/8 RU10-6 1.94 1.25 0.87 15/16 0.28
5/8 1/2 RU10-8 2.05 1.25 0.87 15/16 0.41
3/4 1/4 RU12-4 1.95 1.25 0.87 1-1/16 0.20
3/4 3/8 RU12-6 2.00 1.31 0.87 1-1/16 0.28
3/4 1/2 RU12-8 2.11 1.31 0.87 1-1/16 0.41
3/4 5/8 RU12-10 2.11 1.31 0.87 1-1/16 0.50
1 1/2 RU16-8 2.39 1.50 1.05 1-3/8 0.41
1 3/4 RU16-12 2.39 1.50 1.05 1-3/8 0.61

T TX
TUBE TUBE PART NO. L L1 L2 F BORE
O.D. O.D.
MILLIMETERS
8 6 MMRU8-6 42.40 18.60 17.70 15 5.00
10 6 MMRU10-6 44.50 19.50 17.70 18 5.00
10 8 MMRU10-8 44.50 19.50 18.60 18 6.50
12 6 MMRU12-6 47.00 22.00 17.70 22 5.00
12 8 MMRU12-8 47.80 22.00 18.60 22 6.50
12 10 MMRU12-10 48.70 22.00 19.50 22 7.90
16 10 MMRU16-10 49.50 22.00 19.50 24 7.90
16 12 MMRU16-12 52.00 22.00 22.00 24 9.50
18 12 MMRU18-12 53.50 22.00 22.00 27 9.50
25 18 MMRU25-18 60.50 26.50 22.00 35 15.00
25 20 MMRU25-20 62.30 26.50 22.00 35 16.00

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 21

 tube fitting

BULKHEAD UNION
F

316

VEE-LOK

VEE-LOK
VEE-LOK

316

316
L2 L1
L

TUBE Panel Hole Max. Panel

PART NO. L L1 L2 F BORE
O.D. Size Thick.
INCHES
1/16 BU1 1.23 0.43 0.68 5/16 13/64 0.12 0.052
1/8 BU2 2.02 0.60 1.23 1/2 21/64 1/2 0.09
1/4 BU4 2.27 0.70 1.31 5/8 29/64 17/32 0.20
5/16 BU5 2.40 0.73 1.42 11/16 33/64 9/16 0.25
3/8 BU6 2.46 0.76 1.44 3/4 37/64 9/16 0.28
1/2 BU8 2.80 0.87 1.65 15/16 49/64 19/32 0.41
5/8 BU10 2.86 0.87 1.68 1-1/16 57/64 19/32 0.50
3/4 BU12 3.11 0.87 1.87 1-3/16 1-1/64 25/32 0.61
1 BU16 3.78 1.05 2.27 1-5/8 1-21/64 15/16 0.86

TUBE Panel Hole Max. Panel

PART NO. L L1 L2 F BORE
O.D. Size Thick.
MILLIMETERS
6 MBU6 57.90 17.70 33.70 16 11.50 10.20 5.00
8 MBU8 61.00 18.60 36.00 18 13.10 11.20 6.50
10 MBU10 63.60 19.50 37.00 22 16.30 11.20 7.90
12 MBU12 71.00 22.00 41.90 24 19.50 12.70 9.50
15 MBU15 72.50 22.00 42.60 27 22.50 12.70 11.90
16 MBU16 72.60 22.00 42.60 27 22.50 12.70 12.70
18 MBU18 78.90 22.00 47.40 30 26.00 16.80 15.00
20 MBU20 88.20 22.00 51.00 35 29.00 19.00 16.00
25 MBU25 95.80 26.50 54.40 41 33.80 24.00 22.00

Dimensions for reference only, subject to change without prior notice

22 Two Ferrule Tube Fitting

 tube fitting

UNION ELBOW L1
F

316
VEE-LOK

L1
316 VEE-LOK

TUBE
PART NO. L1 F BORE
O.D.
INCHES
1/16 UE1 0.71 1/2 0.052
1/8 UE2 1.07 1/2 0.09
1/4 UE4 1.07 1/2 0.20
5/16 UE5 1.14 9/16 0.25
3/8 UE6 1.20 5/8 0.28
1/2 UE8 1.44 13/16 0.41
5/8 UE10 1.57 1 0.50
3/4 UE12 1.57 1 0.61
1 UE16 2.00 1-3/8 0.86

TUBE
PART NO. L1 F BORE
O.D.
MILLIMETERS
6 MUE6 27.20 1/2 5.00
8 MUE8 29.10 9/16 6.50
10 MUE10 31.60 11/16 7.90
12 MUE12 36.60 13/16 9.50
14 MUE14 40.00 1 11.10
15 MUE15 40.00 1 11.90
16 MUE16 40.00 1 12.70
18 MUE18 40.00 1 15.00
20 MUE20 47.50 1-3/8 16.00
22 MUE22 47.50 1-3/8 18.00
25 MUE25 50.70 1-3/8 22.00

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 23

 tube fitting

CROSS UNION
F

L1
L

TUBE
PART NO. L L1 F BORE
O.D.
INCHES
1/8 CU2 2.14 1.07 1/2 0.09
1/4 CU4 2.14 1.07 1/2 0.20
3/8 CU6 2.38 1.19 5/8 0.28
1/2 CU8 2.88 1.44 13/16 0.41

TUBE
PART NO. L L1 F BORE
O.D.
MILLIMETERS
6 MCU6 54.40 27.20 1/2 5.00
8 MCU8 60.60 30.30 5/8 6.50
10 MCU10 68.80 34.40 13/16 7.90
12 MCU12 73.20 36.60 13/16 9.50

Dimensions for reference only, subject to change without prior notice

24 Two Ferrule Tube Fitting

 tube fitting

REDUCER F

316
T TX

VEE-LOK
L1 L2
L

T TX
TUBE TUBE PART NO. L L1 L2 F BORE
O.D. O.D.
INCHES
1/16 1/8 R1-2 1.10 0.43 0.53 5/16 0.080
1/16 1/4 R1-4 1.24 0.43 0.63 7/16 0.170
1/8 1/8 R2-2 1.36 0.59 0.55 7/16 0.078
1/8 1/4 R2-4 1.45 0.59 0.64 7/16 0.169
1/4 1/8 R4-2 1.47 0.69 0.55 1/2 0.078
1/4 1/4 R4-4 1.56 0.69 0.64 1/2 0.169
1/4 3/8 R4-6 1.60 0.69 0.69 1/2 0.267
1/4 1/2 R4-8 1.80 0.69 0.91 9/16 0.370
3/8 1/4 R6-4 1.64 0.75 0.65 5/8 0.169
3/8 3/8 R6-6 1.68 0.75 0.69 5/8 0.267
3/8 1/2 R6-8 1.90 0.75 0.91 5/8 0.370
1/2 1/4 R8-4 1.77 0.86 0.65 13/16 0.169
1/2 3/8 R8-6 1.82 0.86 0.69 13/16 0.267
1/2 3/4 R8-12 2.10 0.86 0.97 13/16 0.570
3/4 1/2 R12-8 2.07 0.86 0.91 1-1/16 0.370

Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 25

 tube fitting

REDUCER F

316
T TX

VEE-LOK
L1 L2
L

T TX
TUBE TUBE PART NO. L L1 L2 F BORE
O.D. O.D.
MILLIMETERS
6 8 MR6-8 41.10 17.80 16.70 14 5.60
6 10 MR6-10 42.00 17.80 17.60 14 7.50
6 12 MR6-12 47.40 17.80 23.00 14 8.80
8 6 MR8-6 41.50 18.50 16.40 15 4.00
8 10 MR8-10 42.70 18.50 17.60 15 7.50
10 6 MR10-6 43.00 19.60 16.40 18 4.00
10 8 MR10-8 43.30 19.60 16.70 18 5.60
10 12 MR10-12 49.60 19.60 23.00 18 8.80
12 6 MR12-6 46.20 21.80 16.40 22 4.00
12 8 MR12-8 46.50 21.80 16.70 22 5.60
12 10 MR12-10 47.40 21.80 17.60 22 7.50
12 16 MR12-16 54.40 21.80 24.60 22 12.70
12 18 MR12-18 54.40 21.80 24.60 22 14.00
16 12 MR16-12 53.30 21.80 23.00 24 8.80
18 12 MR18-12 53.30 21.80 23.00 27 8.80
18 16 MR18-16 55.40 21.80 24.60 27 12.70
18 20 MR18-20 57.00 21.80 26.20 27 15.50
18 25 MR18-25 62.60 21.80 31.80 27 20.60
20 16 MR20-16 56.40 21.80 24.60 30 12.70
20 18 MR20-18 56.40 21.80 24.60 30 14.00
20 25 MR20-25 63.60 21.80 31.80 30 20.60
22 18 MR22-18 56.40 21.80 24.60 30 14.00
22 20 MR22-20 58.00 21.80 26.20 30 15.50
25 12 MR25-12 59.70 26.80 23.00 35 8.80
25 18 MR25-18 63.90 26.80 24.60 35 14.00
25 20 MR25-20 65.50 26.80 26.20 35 15.50

Dimensions for reference only, subject to change without prior notice

26 Two Ferrule Tube Fitting

 tube fitting

MALE ADAPTER
F

BORE

VEE-LOK
L1 L2
L

TUBE MALE
PART NO. L L1 L2 F BORE
O.D. THREAD
INCHES
1/16 1/8 MA1-2 1.00 0.38 0.38 7/16 0.031
1/8 1/8 MA2-2 1.15 0.56 0.38 7/16 0.078
1/8 1/4 MA2-4 1.35 0.56 0.56 9/16 0.078
1/4 1/8 MA4-2 1.24 0.65 0.38 7/16 0.169
1/4 1/4 MA4-4 1.44 0.65 0.56 9/16 0.169
1/4 3/8 MA4-6 1.46 0.65 0.56 11/16 0.169
1/4 1/2 MA4-8 1.73 0.65 0.75 7/8 0.169
5/16 1/8 MA5-2 1.26 0.66 0.38 7/16 0.216
5/16 1/4 MA5-4 1.46 0.66 0.56 9/16 0.216
3/8 1/8 MA6-2 1.37 0.69 0.38 7/16 0.267
3/8 1/4 MA6-4 1.46 0.69 0.56 9/16 0.267
3/8 3/8 MA6-6 1.51 0.69 0.56 11/16 0.267
3/8 1/2 MA6-8 1.73 0.69 0.75 7/8 0.267
1/2 1/4 MA8-4 1.67 0.91 0.56 9/16 0.370
1/2 3/8 MA8-6 1.74 0.91 0.56 11/16 0.370
1/2 1/2 MA8-8 1.96 0.91 0.75 7/8 0.370
5/8 1/2 MA10-8 2.02 0.97 0.75 7/8 0.468
3/4 1/2 MA12-8 2.06 0.97 0.75 7/8 0.570
3/4 3/4 MA12-12 2.06 0.97 0.75 1-1/16 0.570
1 3/4 MA16-12 2.34 1.25 0.75 1-1/16 0.826
1 1 MA16-16 2.70 1.25 0.94 1-3/16 0.826

TUBE MALE
PART NO. L L1 L2 F A BORE
O.D. THREAD
MILLIMETERS
6 1/8 MMA6-2 32.10 16.40 9.70 11 4.00 4.00
6 1/4 MMA6-4 37.10 16.40 14.20 14 4.00 4.00
8 1/4 MMA8-4 37.40 16.70 14.20 14 6.40 5.60
8 3/8 MMA8-6 37.90 16.70 14.20 18 6.40 5.60
10 1/4 MMA10-4 38.30 17.60 14.20 14 7.10 7.50
10 3/8 MMA10-6 38.80 17.60 14.20 18 7.50 7.50
10 1/2 MMA10-8 44.70 17.60 19.10 22 7.50 7.50
12 1/4 MMA12-4 44.20 23.00 14.20 14 7.10 8.80
12 1/2 MMA12-8 50.10 23.00 19.10 22 9.10 8.80
16 1/2 MMA16-8 51.70 24.60 19.10 22 12.70 12.70
18 1/2 MMA18-8 51.70 24.60 19.10 22 12.70 14.00
18 3/4 MMA18-12 52.70 24.60 19.10 27 14.00 14.00
20 3/4 MMA20-12 53.50 26.20 19.10 27 15.10 15.50
25 1 MMA25-16 69.20 31.80 23.90 35 19.80 20.60
Dimensions for reference only, subject to change without prior notice

Two Ferrule Tube Fitting 27

 tube fitting

FEMALE ADAPTER
F

VEE-LOK
BORE

L1
L

TUBE FEMALE
PART NO. L L1 F BORE
O.D. THREAD
INCHES
1/16 1/8 FA1-2 1.070 0.340 9/16 0.031
1/8 1/8 FA2-2 1.125 0.555 9/16 0.078
1/8 1/4 FA2-4 1.322 0.555 3/4 0.078
1/4 1/8 FA4-2 1.216 0.645 9/16 0.169
1/4 1/4 FA4-4 1.413 0.645 3/4 0.169
1/4 3/8 FA4-6 1.452 0.645 7/8 0.169
1/4 1/2 FA4-8 1.590 0.645 1-1/16 0.169
5/16 1/4 FA5-4 1.429 0.661 3/4 0.216
3/8 1/8 FA6-2 1.263 0.692 9/16 0.267
3/8 1/4 FA6-4 1.460 0.692 3/4 0.267
3/8 3/8 FA6-6 1.500 0.692 7/8 0.267
3/8 1/2 FA6-8 1.637 0.692 1-1/16 0.267
1/2 1/4 FA8-4 1.673 0.905 3/4 0.370
1/2 3/8 FA8-6 1.712 0.905 7/8 0.370
1/2 1/2 FA8-8 1.850 0.905 1-1/16 0.370
5/8 1/2 FA10-8 1.917 0.972 1-1/16 0.468
3/4 1/2 FA12-8 1.917 0.972 1-1/16 0.570
3/4 3/4 FA12-12 2.035 0.972 1-3/8 0.570
3/4 1 FA12-16 2.133 0.972 1-5/8 0.570
1 3/4 FA16-12 2.314 1.251 1-3/8 0.826
1 1 FA16-16 2.610 1.251 1-5/8 0.826

TUBE FEMALE
PART NO. L L1 F A BORE
O.D. THREAD
MILLIMETERS
6 1/8 MFA6-2 30.40 16.40 14 4.00 4.00
6 1/4 MFA6-4 35.40 16.40 19 4.00 4.00
8 1/4 MFA8-4 35.70 16.70 19 6.40 5.60
10 1/4 MFA10-4 36.60 17.60 19 7.50 7.50
10 3/8 MFA10-6 37.60 17.60 22 7.50 7.50
10 1/2 MFA10-8 41.60 17.60 27 7.50 7.50
12 1/4 MFA12-4 42.00 23.00 19 9.10 8.80
12 3/8 MFA12-6 43.00 23.00 22 9.10 8.80
12 1/2 MFA12-8 47.00 23.00 27 9.10 8.80
16 1/2 MFA16-8 48.60 24.60 27 12.70 12.70
18 3/4 MFA18-12 51.60 24.60 35 14.00 14.00
20 1/2 MFA20-8 50.20 26.20 27 15.00 15.50
20 3/4 MFA20-12 53.20 26.20 35 15.10 15.50
25 1 MFA25-16 66.30 31.80 41 19.80 20.60

Dimensions for reference only, subject to change without prior notice

28 Two Ferrule Tube Fitting

 tube fitting

NUT F

Two Ferrule Tube Fitting 29

 tube fitting

BACK FERRULE

30 Two Ferrule Tube Fitting

 tube fitting

FRONT FERRULE

Two Ferrule Tube Fitting 31

 tube fitting

PLUG CAP

7/8

32 Two Ferrule Tube Fitting

Vertex Co., Ltd.
3F, No.3, Lane 551, Sec. 1, Wanshou Rd.,
Gueishan Township, Taoyuan County 33351,
Taiwan
Tel: +886 2 8200 3813
Fax: +886 2 8200 3817
[email protected]

www.veelok.com