0% found this document useful (0 votes)
12 views

10 OPzV1000

Uploaded by

Gilberto Mejia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
12 views

10 OPzV1000

Uploaded by

Gilberto Mejia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Tubular Gel Battery

10 OPzV1000V(2V1000AH)

Main Technical Advantages


Terminal sealing: Lead pillar with copper insert has better current loading property and better corrosion resistance.Private
sealing construction can effectively eliminate the stress caused by plate growthin later period of battery operation.This can
prevent any leakage and make sure the reliability of pillar sealing so as to improve hugely battery service life.
Plate: positive plate adopts tubular plate which can prevent active material falling, and adopts multi-component alloy frame.
have fine corrosion-resisting performance and long service life.Negative plate adopts special radiated structure.
Separator: adopt special micro-pore PVC-SiO 2 separator from Europe AMER-SIL Company, separator have big
porosity and low resistance.
Electrolyte: adopts Germany gas silicon dioxide,electrolyte in gel state in the batterywithout flowing,
leakage and lamination can be avoided.
Safety valve: adopt Germany technology,constant opening and closing,accumulator case
expansion, damage and electrolyte dry up can be avoided.
Service life up to 18-20 years incontinuous float operation down to approx. 80% capacity.
Low gassing thanks to antimony-free alloy and internal oxygen recombination.

Minimum space required and room requirements are minimal e.g. no washing
facilities needed, ventilation requirements are minimal.

Easy to move and handle.


Easy install using cable connectors with insulated terminal covers.

Ready for immediate use without further commissioning work.

Can be supplied as a standard vertical installation or by special request, for a horizontal installation.

Deep discharge protected, a load can be connected to the battery for up to 4 weeks.
No internal short circuits possible due to the gel structure.
No acid stratification, so noequalizing charge necessary.

Gas emission:less than 10ml per C10 per month with 2.23V/cell float voltage.

1
Tubular Gel Battery
10 OPzV1000V(2V1000AH)
Specification
Nominal Voltage 2V
Capacity 1000.0Ah@10hr to 1.80V/cell
Length 233 2mm (9.17 inches)
Width 210 3mm (8.27 inches)
Dimension Tubular
Container Height 646 3mm (25.4 inches) GEL Bat
tery
Total Height (with Terminal) 681 3mm (26.8 inches) 10 OPzV
1000V(2
V,1000A
Maintenc
e-free Sea
H)
led Lead-ac

Approx Weight Approx 78.5 kg (173.1lbs) SEL ED

LEO CH
LEA D BAT
DISP OSE
D OF PRO

BAT TER
TER Y MUS
PER LY
T
id GEL Batt
BE REC
ery
YCL ED
OR

MAD E IN Y CO., LTD.


CHIN A

Number of plate 10+/11-


Container Material ABS

980 AH/ 98.0A (10hr,1.83V/cell,200C/680F)


1000 AH/100.0A (10hr,1.80V/cell,200C/680F)
858 A H/172A (5hr,1.77V/cell,200C/680F)
Rated Capacity
762 AH/254A (3hr,1.75V/cell,200C/680F)
558 AH/558A (1hr,1.67V/cell,200C/680F) Applications
Max. Discharge Current 8000A (5s) Solar energy, wind energy
Internal Resistance Approx 0.322mÙ Electric power, nuclear power
Communication
Discharge : -20 550C (-4 1310F)
Ship, maritime affairs
Operating Temp.Range Charge : 0 400C (32 1040F )
Storage : -20 500C (-4 1220F) UPS, medical facilities and emergency
lighting
Initial Charging Current 100.0A.Voltage Situation with high environmental protection
Cycle Use
2.35V~2.40V at 200 C(680 F)Temp. Coefficient -5mV/0C and energy-saving
No limit on Initial Charging Current Voltage Better safety performance and reliability
Standby Use 0 0 0 Designed service life of 20 years
2.23V~2.27V at 20 C(68 F)Temp. Coefficient -3mV/ C
Recharge time 10h(10 hrs to 90% SOC at 80% DOD)
Self-discharge <2% pre month @ 20 0 C(68 0 F)

Constant Current Discharge (Amperes) at 20 0C (68 0F )


F.V/Time 10min 15min 30min 1h 2h 3h 5h 8h 10h
1.85V/cell 682 648 558 445 295 228 157 110 93.7
1.80V/cell 839 784 650 502 324 249 169 118 100
1.75V/cell 992 877 693 522 333 254 173 119 102
1.70V/cell 1113 957 733 542 342 259 175 121 103
1.65V/cell 1196 1011 763 558 349 264 178 122 104
1.60V/cell 1251 1047 782 568 354 267 180 123 105

Constant Power Discharge (Watts) at 20 0C (68 0F )


F.V/Time 10min 15min 30min 1h 2h 3h 5h 8h 10h
1.85V/cell 1268 1217 1066 862 574 446 309 217 186
1.80V/cell 1532 1452 1230 964 627 483 332 232 199
1.75V/cell 1782 1603 1298 997 641 492 337 236 201
1.70V/cell 1964 1724 1360 1029 654 500 341 238 203
1.65V/cell 2071 1793 1400 1051 665 507 345 241 205
1.60V/cell 2126 1830 1421 1062 670 511 347 242 206

2
Dimensions

Terminal

15.7
9.7

663.7 2
681 2
646 2
Discharge Characteristics Charging Characteristics
2.50 25
A
2.45 0.1C 10
Charge voltage (V/cell)

Charging time in hours


Equaling charge voltage 20
2.40
for max. 16 hours
2.35
A
2.30 0.2C 10 B
10
2.25
Float voltage +/- 1%
2.20

2.15

2.10
0
-10 10 20 30 40 50 0 50 100
-20 0
Temperature ( C) 0 Depth of discharge in % of C10
For continuous charging we recommend a voltage of 2.25 V. Charge voltage:
The charging voltage must be compensated to the curve for A 2.25 V/cell B 2.40 V/cell
acontinuously different battery ambient temperature. State of charge 100 % State of charge 90 %

Temperature Effects in Relation to Battery Capacity Effect of Temperature on Long Term Float Life

110
105 22
100
20
Available capacity( % )

Life expectancy (year)

95
90 18
Charging voltage
85 16
80 2.25V/cell
14
75
70 12
65
C 10 10
60 C5
55 C3 5
50
45
C1
40
35
0
30 20 30 40 50 O
C
-20 -15 -10 -5 0 5 10 15 20 25 30 68 86 104 122 F
Ambient temperature( ) Battery temperature

Cycle Life in Relation to Depth of Discharge General Relation of Capacity VS. Storage Time
0 0
Acc.to IEC 896-2 (20 C / 68 F)
Residual average capacity in % of C10
100 120
90
Available capacity / %
Extracted capacity in %

100
80

70 80
10
60
60
50
40 30
20
40 40
30
20
20

10 0 5 10 15 20 25
1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500
Number of Cycles Storage time (months)

Sales Office
Sales Office
China sales office: North America sales office: Europe sales office:
Add:5th Floor,Xinbaohui Bldg.,Nanhai Blvd., Add: 19751 Descartes, Unit A, Add: 9B Wheatstone Park, Waterwells
Nanshan,Shenzhen, China. 518052 Foothill Ranch, CA 92610, USA Business Park, Gloucester, GL2 2AQ. UK.
Tel:+ 86-755-86036060 (100 lines) Tel: 949-588-5853 Tel: +44(0) 1452 729428
Fax: +86-755-26067269 Fax: 949-588-5966 Fax: +44 (0)1452-690125
E-mail:[email protected] E-mail: [email protected] E-mail: [email protected]

You might also like