Scribd
Upload
12 views

EC-Smart-Vue_JUN2021

Uploaded by

r.boyer31
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

EC-Smart-Vue_JUN2021

Uploaded by

r.boyer31
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 29

Distech-Controls’

EC-Smart-Vue

1 EC-Smart-Vue Models and Features

2 EC-Smart-Vue Subnetwork

20:00 3
ESTIMATED TIME: Scenes, Values, and Conditions
EC-Smart-View:
Models & Features Overview

 EC-Smart-Vue Features
 EC-Smart-Vue Model Comparison
 EC-Smart-Vue Icon Placement
 EC-Smart-Vue: A Commissioning Tool
EC-Smart-Vue (4-in-1 Sensor)
EC-Smart-Vue Features

 Communicating sensor for VAV, Fan Coil, Roof Top, Heat


Pump, Unit Ventilator, and Room Control applications
 For use with Distech-Controls BACnet MSTP and IP/WiFi
(ECB/ECY series), and Lonworks (ECL series) controllers
 Models available with up to four integrated sensors:
Temperature, Humidity, CO2, and Motion to support
demand-controlled ventilation and occupancy-based control
strategies for additional energy savings
 Backlit LCD display and icon-driven menu
 Innovative ECO-Vue feature graphically indicates energy
consumption in real-time to promote energy-conscious
behavior
EC-Smart-Vue Features

 Can be used as a handheld tool with air balancing menus to


perform VAV air flow balancing without the aid of an onsite
building automation system or control engineer
 Select and configure controller’s Pre-Loaded applications for
(ECB-VAV, ECL-VAV, and ECY-VAV Series)
 Program, Commission, and Troubleshoot locally with built-in
network port providing access to the network
 Can be daisy-chained for applications where one controller
is serving multiple rooms or large open spaces
EC-Smart-Vue Features

 Power over CAT-5

 (2) RJ-45 ports

 Daisy-Chain connections
EC-Smart-Vue Model Comparison

Motion (M)
EC-Smart-Vue interfaces with the ECY/ECB/ECL
Relative Humidity H)
series controller and is a 4-in-1 sensor (CHM
Temperature
model):
Carbon dioxide (C)
 Temperature
 Relative humidity
 Motion
 CO2
Scenes: rolling, quick edit, menu
It has a customizable LCD readout and graphically ECO-Vue leaf: energy consumption
indicates energy consumption using the ECO-Vue
leaf pattern. Advanced menu options

7
EC-Smart-Vue Model Comparison
EC-Smart-Vue Icon Placement

Clock
Units

EC-Smart-Vue Fan Occupancy


LCD screen with ICONS

Configurable through EC-gfxProgram


EC-Smart-Vue Icon Placement
EC-Smart-Vue ECO-Vue Icon

11
EC-Smart-Vue: A Commissioning Tool

MAC Address
Baud Rate
Subnet
Commissioning Tool > > > > Flow Balance
VAV Box Configuration

Advanced menu options

Configurable through EC-gfxProgram > >

Scenes: rolling, quick edit, menu


Customizable Icons
EC-Smart-Vue : A Commissioning Tool

MAC Address
Baud Rate
Subnet
Flow Balance
VAV Box Configuration

EC-Smart-Vue can also be used as a commissioning tool to:


 Set the MAC Address, Baud Rate, or Subnet ID for BACnet ECB-series and ECB-VAV-series
controllers
 Flow balance VAV controllers
 Configure VAV box configurations for VAV controller pre-loaded applications
EC-Smart-Vue : A Commissioning Tool

EC-Smart-Vue as a Commissioning tool for all


ECB controllers
 Once connected to an ECB controller, the EC-
Smart-Vue can be used to perform
commissioning tasks

 Set ECB controller’s MAC address

 Setting ECB controller’s Baud Rate

 Accessing the BACnet MSTP LAN


EC-Smart-Vue:
Subnetwork

 Sub-Network: Overview
 Sub-Network: End-of-Line
 Sub-Network: Subnet ID
Sub-Network Overview

The Sub-Network on the ECL


and ECB lines of controllers is
used to communicate with
communicating peripherals
made by Distech Controls like:
 EC-Smart-Vue
 ECx I/O modules
Sub-Network Overview

The Sub-Network works with RS-485 transceivers, that makes the wiring and addressing
methods very similar to the BACnet MS/TP bus, but it is NOT part of the BACnet Network.
Sub-Network Overview and EOL

 Both Power and Communications


pass through a single Cat 5e cable

 (2) RJ-45 Ports to support a daisy-


chain of room devices under a single
controller

 End-of-line terminators in the form


of a jumper must be set to ON at the
last sensor at the end of the bus.
Sub-Network: Setting the Subnet ID

(Subnet MAC Address)

• The default Subnet ID for an EC-Smart-Vue is set to 1

• Keep default Subnet ID of 1 if there is only one EC-Smart-


Vue connected to the controller

• If you have more then 1 EC-Smart-Vue on the Sub-Network,


change the Subnet ID on each one to a unique number.

• This process can be found in the Distech Controls


Network Guide, (CH. 5)
EC-Smart-Vue:
Scenes, Values,
and Conditions

 Main Rolling Scenes


 Quick Edit and Menu Scenes
 Advanced Menu Scenes
 Local and Global Values
 Conditions
 Enumerations
 Communications
EC-Smart-Vue: Main Rolling Scenes

96 Scenes are available.

 Display Values and Information

 Some Standard Scenes are already configured

 Display Space Temp

 Display Relative Humidity

Standard Scenes Custom Scenes


EC-Smart-Vue: Quick Edit and Menu Scenes

Quick Edit Scenes:

 Scene that is displayed when an


arrow key is pressed

 Used to Edit a value (typically


the Temperature setpoint)

Menu Scenes:
 Scenes that are displayed when
the menu button is pressed
 Advance to the next Scene each
time the menu button is pressed
 Used to Edit or View many other
values
EC-Smart-Vue: Advanced Menu Scenes

 Scenes that are displayed when the menu button is held for 5 sec

 Must provide the default password of 9995.

 The first one is the password Scene

 Some Standard Scenes already exist:

 Edit Subnet ID

 Edit MAC Address

 Edit Baud Rate

 Display Hardware Info

 Calibrate Space Temp

 Adjust Contrast
EC-Smart-Vue: Local and Global Values

Used to Store data available to and from the EC-Smart-Vue:

 30 Local Values

 Number and name of Values identical across all the


EC-Smart-Vues

on the controller

 Values within the Local Values are


unique for each EC-Smart-Vue

 70 Global Values

 Names and values are shared across all the EC-


Smart-Vues
EC-Smart-Vue: Conditions

 Used to Hide/Show Scenes

 15 Conditions

 Number and name of registers identical


across all the EC-Smart-Vues on the
controller

 Values within the conditions are unique


for each EC-Smart-Vue
EC-Smart-Vue: Enumerations

 Used to select options in the Select


Enumeration scenes
 User can select the numerical Start
Value of the enumeration
 Total of 127 Strings available for
enumerations
 Each string up to 16 characters
 Texts displayed in the text section
of a scene are using Strings out of
the 127
 Optimization done if the same
text is used more than once
EC-Smart-Vue: Enumerations

 Used to display any Icon in any Scene

 Set by an Icon Value selection

 Unit Icons are also use for conversions


EC-Smart-Vue: Communication

Local Values
SmartVue1
 2-way communication
 Local and Global Values Conditions
SmartVue1
 Local Conditions
Local Values
Local Values SmartVue2

 Occupied Cool Setpoints Conditions


 Occupied Heat Setpoints SmartVue2

 … Local Values
SmartVue3

Global Values Conditions


 Minimum Airflow Setpoint SmartVue3

 VAV application code


 … Global Values
Conclusion
Fully Customizable

Templates are available within the gfxApplications


code library

Integrators should always start from a template when


configuring the EC-Smart-Vue

96 Scenes are available for display and edit

All Scenes are identical for each EC-Smart-Vue


connected to the same controllers
*Conditions and Local/Global Values are used to display
Distech-Controls’ EC-Smart-Vue is a fully customizable communicating different information on different EC-Smart-Vues (ie. Remove a
sensor. The EC-Smart-Vue is equipped with an LCD screen with several Scene for one or more EC-Smart-Vues)
icons and settings to accurately display space conditions and settings, as
well as configuring controllers and devices.
Distech-Controls’ EC-Smart-Vue offers integrators and balancers with an
interface to configure controller applications and settings, as well as balance
controllers.

You might also like