DIN US

DIN
US
ALLROUNDER 270 A
Distance between tie bars: 270 x 270 mm
Clamping force: 350 kN
Injection unit (acc. to EUROMAP): 5, 70, 100

US
DIN

DIN US
 US DIN

DIN
US

MACHINE DIMENSIONS | 270 A

22101) 18752)3)

20373)
1901

1220

438
425

254
max. 410
120

238 500 387

256 470 1200

3354

30541) 32732) 34883)

Electrical connection

Cooling water connection

558
1095
1188

1) Injection unit 5
2) Injection unit 70
3) Injection unit 100

2
US
DIN

US DIN
 DIN US

DIN
US
TECHNICAL DATA | 270 A
EN-GB 270 A
Clamping unit 270 A
with clamping force max. kN 350
Opening force | stroke max. kN | mm --- | 200
Mould height, fixed | variable min.-max. mm --- | 150-350
Platen daylight fixed | variable max. mm --- | 350-550
Distance between tie bars (w x h) mm 270 x 270
Mould mounting platens (w x h) max. mm 380 x 380
Weight of movable mould half max. kg 200
Ejector force | stroke max. kN | mm 16 | 60
Dry cycle time EUROMAP Comfort min. s - mm 1 - 189
Ultimate min. s - mm 0,7 - 189

Injection unit 5 70 100

with screw diameter mm 8 18 22 25 20 25 30
Effective screw length L/D 12 24,5 20 17,5 25 20 16,7
Screw stroke max. mm 50 90 100
Calculated stroke volume max. cm³ 2,5 23 34 44 31 49 71
Shot weight max. g PS 2,3 21 31 40 29 45 65
Material throughput max. kg/h PS 1 4,1 5,5 6,5 5,5 8 9,5
max. kg/h PA6.6 0,5 2,1 2,8 3,3 2,8 4 4,9
Injection pressure max. bar 2000 2500 2000 1550 2500 2000 1390
Holding pressure time max. s - bar 300-1600 300-2390 300-1600 300-1240 300-2500 300-1600 300-1110

Injection flow ² Comfort [+] max. cm³/s --- 51 [66] 76 [99] 98 [127] 64 [83] 100 [130] 144 [187]

Ultimate [+] max. cm³/s 25 76 [101] 114 [152] 147 [196] 94 [125] 148 [197] 214 [285]

Injection speed ⁵ Comfort [+] max. mm/s --- 280 [350] 280 [350]

Ultimate [+] max. mm/s 500 350 [400] 350 [400]

Screw circumferential speed max. m/min 9 45 55 63 40 50 60

Screw torque max. Nm 12 90 110 120 120 150 180
Nozzle contact force | retraction stroke max. kN | mm 5 | 150 50 | 230 50 | 230
Heating capacity | zones kW 1,9 | 5 4,1 | 4 4,9 | 5
Feed hopper l 1,8 25 50

Drive and connection Comfort Ultimate

with injection unit 70 100 5 70 100
Net weight of machine kg 2350 2490 2300 2350 2490
Sound press. level | Insecurity ⁴ dB(A) 63 | 3 63 | 3
Electrical connection ³ kW 11 13 13 16 18
Total A 40 50 50 50 63
Machine A --- ---
Heating A --- ---
Cooling water connection max. °C 30 30
min. Δp bar 1,5 | DN 25 1,5 | DN 25

Upon request: other machine types and mould installation heights, screws, drive powers etc.
Machine type All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and
with EUROMAP size designation ¹ material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be
mutually exclusive.
270 A 350-5
1) Clamping force (kN) - size of injection unit = max. stroke volume (cm³) x max. injection pressure (kbar)
270 A 350-70 | 100 2) Specification of maximum injection flow at maximum injection pressure.
3) Specifications relate to 400 V/50 Hz.
4) Emission sound pressure level at the workplace. Detailed information in the operating instructions.
5) Forward speed of plasticising screw at 1000 bar injection pressure.
[] Specifications apply to alternative equipment.

3
US
DIN

DIN US
 US DIN

DIN
US

MOULD INSTALLATION DIMENSIONS | 270 A

Ø125H7 Ø60H71)
Stroke max. 60 142-1 C

205
Y
X

a max. Injection unit

5 70/100
B Standard 50 40

A Thermoset - 20
a

Stroke max. 200 max. 350 - 550 Mould installation height min. - max. 150 - 350

Ejector bolt | X Bore in mould (if required) | Y

28,5
Ø18-0,1

Ø401) Ø502) Ø603)

Ø13

Ø802) Ø903)
Ø18
30°

3
55
8-0,1
202)3)
21 Injection unit 5 / 70 / 1003) 1) 2)

180
Closing force for spring moulds / Robotic system mounting | C
during injection compression moulding*

300 52,5

250
17,5
Closing force [kN]

200

150
M8-16 deep
100 52
50
15
420

370

280

100

0
0 50 100 150 200
65
Mould stroke [mm]
* automatic locking force adjustment up to 20 kN

1) Optional with size 5 injection unit

M12-24 deep

4
US
DIN

US DIN
 DIN US

DIN
US
MOULD INSTALLATION DIMENSIONS | 270 A

Fixed mould mounting platen | A

Ø125H7 Ø60H71)
45°
45°
350

280

210

140

70

516,5
Ø1
70

311,5
M12-24 deep
Bores for ARBURG mechanical 70
mould rapid clamping system Ø14
140

210

280

350

Moving mould mounting platen | B

249 269
55
45°
45°
M8-16 deep
356,5
Ø21
180

Ø170
419
120,2
315

270

538,5
45

270
52 Ø14
M8-16 deep 315

404

410 430
1) Optional with size 5 injection unit

5
US
DIN

DIN US
 US DIN

DIN
US

SHOT WEIGHTS | 270 A

Theoretical shot weights for the most important injection moulding materials

Injection units according to EUROMAP 30 70 100

Screw diameter mm 15 18 18 22 25 20 25 30
Polystyrene max. g PS 9,5 14,0 21 31 40 29 45 65
Styrene heteropolymerizates max. g SB 9,5 13,5 20 31 39 28 44 63
max. g SAN, ABS1) 9,5 13,5 20 30 39 27 43 62
Cellulose acetate max. g CA1) 11,0 15,5 24 35 45 32 50 73
Celluloseacetobutyrate max. g CAB1) 10,0 14,5 22 33 42 30 47 68
Polymethyl methacrylate max. g PMMA 10,0 14,5 22 32 42 30 46 67
Polyphenylene ether, mod. max. g PPE 9,0 13,0 19 29 37 27 42 60
Polycarbonate max. g PC 10,0 14,5 22 33 42 30 47 68
Polysulphone max. g PSU 10,5 15,0 23 34 44 31 49 70
Polyamides max. g PA 6.6 | PA 61) 9,5 14,0 21 31 40 28 44 64
max. g PA 6.10 | PA 111) 9,0 13,0 19 29 37 26 41 60
Polyoximethylene (Polyacetal) max. g POM 12,0 17,0 26 39 50 35 55 80
Polyethylene terephthalate max. g PET 11,5 16,5 25 37 48 34 53 77
Polyethylene max. g PE-LD 7,5 10,5 16 24 30 22 34 49
max. g PE-HD 7,5 11,0 16 24 31 22 35 50
Polypropylene max. g PP 7,5 11,0 17 25 32 23 36 51
Fluorpolymerides max. g FEP, PFA, PCTFE1) 15,5 22,5 33 50 65 46 72 103
max. g ETFE 13,5 19,5 29 44 57 40 63 91
Polyvinyl chloride max. g PVC-U 11,5 17,0 25 38 49 35 54 78
max. g PVC-P1) 11,0 15,5 23 35 45 32 50 72

1) average value
2) Normal working range for the size 5 injection unit is less than/greater than 50% of the specified values. PVC-P, PVC-U and fluoropolymers are not approved.

680293_EN_GB_092021 · Subject to alterations

ARBURG GmbH + Co KG
Arthur-Hehl-Strasse
72290 Lossburg
Tel.: +49 7446 33-0
www.arburg.com
[email protected]

© 2021 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and
information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
US
DIN

US DIN