Scribd
Upload
17 views1 page

Exercise

Uploaded by

binisola67
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views1 page

Exercise

Uploaded by

binisola67
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Exercise

A cantilever beam supporting balcony slab is fixed at the left support as shown on figure below.
The beam is going to be constructed with reinforced concrete. The concrete used for the
construction will have cube strength 25MPa and the steel has 400MPa. The maximum aggregate
site is 20mm.
The concrete clear cover is 30mm. [Use diameter 8mm for stirrup and one of 14mm, 16mm,
20mm for the longitudinal bar]
Carry out the following tasks for sections
1. Width = 300 mm and total depth = 400mm
2. Width = 250mm and total depth = 500mm
3. Width = 400mm and total depth = 600mm

a. Determine the reactions


b. Draw shear force diagram
c. Draw bending moment diagram
d. Design for bending moment
e. Design for shear
f. Sketch the longitudinal reinforcement bar [Locate whether it is along top or
bottom]

You might also like