1

ALTERNATOR TECHNICAL DESCRIPTION

LSA 56 XXXX
LS Reference: test1 1

Date: 11-18-2021 V6.08 - 08/2021 1

Project Manager : W i l l
Moteurs Leroy-Somer [email protected]
00-86-591 88373048
No.1 Aimosheng Road,Gaishan Town,Cangshan District - Fuzhou,Fujian ,350026 P.R.China LL

Main data C 1
Generator type: LSA 56 XXXX 1
Power: 3 750 kVA 3 000 kWe 3 104 kWm 1
Voltage: 6 600 V Star serial 1
Rated voltage range: +5/-5% 1f
Power factor - Lagging: 0,8 1
Frequency: 50 Hz 1
Speed: 1 500 rpm 1
Nominal current: 328 A 1
Winding type: p5/6 1
Classes (Insulation / Temperature Rise): H/F 1
Ambient temperature: 40 °C 1
Altitude: 1 000 m 1
-
Installation IEC Quantity 1 1
Prime mover: Steam turbine 1
Manufacturer: - 1
Type: - 1
Duty: Base Rating 1
Industry: Utility Power 1
-
Quality 1
Factory Acceptance Test: Included - With client and/or third party 1
Mechanical construction IM1101 1
Type of construction: Two bearing 1
Mounting arrangement: Horizontal Axis 1
Direction of rotation: Counter clockwise (seen when facing the drive end - DE) 1
Bearing type: Sleeve 1
Bearing Lubrication: By oil circulation, with external Oil lubrication unit 1
Bearing insulation: 1 bearing insulated (NDE) 1
Shaft end type: Cylindrical with keyway 1
Balancing - Class (ISO 1940/1): Half key - G1 1
Flange: None / without 1
Shaft height: 600 mm 1
Width: 1 540 mm 1

test1 rev. 1 Page 1 / 8

 1

ALTERNATOR TECHNICAL DESCRIPTION

LSA 56 XXXX
LS Reference: test1 1

Date: 11-18-2021 V6.08 - 08/2021 1

Project Manager : 1
-
Sleeve bearing data 1
Bearing Oil cooling: By the external lubrication unit heat-exchanger, 1
External bearing Oil lubrication: Supplied by the client 1
Bearing inlet Oil température: 55 °C 1
Oil characteristics: Mineral Oil (Std) 1
Hydrostatic jacking: Bearing equipment only 1
Bearing equipped: DE & NDE 1
Oil inlet connection: Location to be defined 1
Oil outlet connection: Location to be defined 1
Bearing axial clearance: Standard 1
Additional specificities 1
Stabilized Runaway speed: 1 800 rpm - 2 min. 1
-
Cooling Method Air-to-Water cooling (CACW) IC81W 1
Degree of protection: IP54 1
Coolant: Water / Temperature: 32 °C 1
Cooler Tube material: CuNi 90/10 - Single tube 1
Flanges: Location to be defined / Type: Std 1
Water quality: Fresh water (unprocessed) 1
Cooler quantity: 1 1
Option : Operating with doors open 1
Ventilation (internal): Self-ventilated 1
Water Leakage Detector: LS Supply 1
-
Connection, Excitation & Regulation 1
Parallel operation: With mains (3F) - 1x //CT 1
Excitation: Self-excited - Brushless - Type: AREP + PMI 1
Sustained 3-phase Isc: > 3 x FLC for 10s. 1
AVR type: Leroy Somer - D700 - Digital 1
AVR location: For panel mounting 1
Alternator Voltage sensing: Terminal box mounted voltage sensing VTs 1
-
Terminal box
Power connection: 4 connectors (brought out neutral) 1
Main terminal box location: 1 terminal box on the top 1
Line side outlet: Left hand side (seen when facing the drive end - D) 1
Gland plate: Non magnetic, Undrilled 1
Auxiliaries In main terminam box 1
- 1
-
Protection and measurement accessories 1
1
Temperature detection 1
Stator windings: 6 x 3-wire PT100 RTDs 1
Combined guide and thrust bearing - DE: 1 x 3-wire PT100 RTD - Guide 1
Guide bearing - NDE: 1 x 3-wire PT100 RTD - Guide 1
Primary coolant - Air: 1 x 3-wire PT100 RTD - Air Inlet 1
1 x 3-wire PT100 RTD - Air Outlet 1
1
Anti-condensation heating 1
Voltage: 230 V - 1Ph / Power: 500 W 1

test1 rev. 1 Page 2 / 8

 1

ALTERNATOR TECHNICAL DESCRIPTION

LSA 56 XXXX
LS Reference: test1 1

Date: 11-18-2021 V6.08 - 08/2021 1

Project Manager : 1
-
Transformers (Client use)
LS Supply 1
Set of 3 x CTs (measuring and/or protection): I Primary / I Secondary / Power / Class
Preliminary Neutral side S1 400 / 1A / 10VA / Cl. 0,5 FS5 1
S2 400 / 1A / 10VA / Cl. 5P10 1
1
Preliminary Line side S1 400 / 1A / 10VA / Cl. 0,5 FS5 1
Line CT supplied loose S2 400 / 1A / 10VA / Cl. 5P10 1
1
-
Various items
Paint: C3M-P - Polyurethane - RAL 7032 1
Documentation: PDF manual 1
Documentation Language: English 1
-
Controls
QUAL/INES/006 001 Measurement of winding resistance 1
QUAL/INES/006 021 Insulation check on sensors (when fitted) 1
QUAL/INES/006 002 Voltage balance and phase order check 1
QUAL/INES/006 003 No load characteristics, no load losses 1
QUAL/INES/006 004 Three phase short circuit characteristic 1
QUAL/INES/006 007 Overspeed test (according to test bench limitation) 1
QUAL/INES/006 008 Calculation of efficiency by summation of losses 1
QUAL/INES/006 009 High potential test 1
QUAL/INES/006 010 Insulation resistance measurement 1
QUAL/INES/006 015 Sudden three phase short circuit at reduced voltage (X'd - X") (one generat 1
QUAL/INES/006 016 Harmonic analysis (one generator of the serial) 1
QUAL/INES/006 017 Waveform trace (one generator of the serial) 1
QUAL/INES/006 018 Heat run test (one generator of the serial) 1
QUAL/INES/006 019 Measurement of specified vibration level 1
QUAL/INES/006 043 Polarisation index 1
-
Additional supplies 1
Spare parts 1 Set of spare parts for the project/order
1 Set of rotating diodes 1
1 Set of Varistor(s) or rotating resistor 1
1 Complete AVR 1
1
1
1
1 Bearing Liners - DE 1
1 Bearing Liners - NDE 1
1
1
1
1
1
Separate accessories
1 Set of levelling jacking screws 1
1 Set of adjusting shims 1
1 Set of fixation screws 1
1 Shaft extension for rotor removal 1
1

test1 rev. 1 Page 3 / 8

 1

ALTERNATOR ELECTRICAL DATA

LSA 56 XXXX
LS Reference: test1

Date: 11-18-2021 V6.08 - 08/2021

Main data: C
Power: 3 750 kVA 3 000 kW e 3 104 kWm 1
Voltage: 6600 V Frequency: 50 Hz 1
Rated voltage range: +5% / -5% Speed: 1500 rpm 1
Power factor - Lagging: 0,8 1
Nominal current: 328 A Phases 3
Insulation / Temperature rise: H/F Connexion Star serial 1
Cooling: IC81W Winding type: p5/6 1
Water : 32 °C Winding: - 6 Wires 1
Ambient temperature: 40 °C 1
Altitude: 1000 m Overspeed (rpm) 1800 1
Duty: Base Rating Total Harmonic Distortion (THD) < 1,5% 1

Efficiency ( Base 3000 kWe ) IEC

25% 50% 75% 100% 110%
Power factor - Lagging: 0,8 92,89 95,74 96,46 96,65 96,66 1
Power factor - Lagging: 1 93,20 96,20 97,06 97,39 97,46 1

Reactances (%) - ( Base 3750 kVA )

Unitary impedance ( 1 per unit ) = 11,616 ohms
Unsaturated Saturated Unsaturated Saturated
Direct axis Quadrature axis
Synchronous reactance Xd 177 162 Xq 90 82 1
Transient reactance X'd 27,3 23,2 X'q 90 82 1
Subtransient reactance X"d 17,4 14,8 X''q 21,7 18,5 1

Negative sequence reactance X2 19,6 16,6

X0 10,9 Zero sequence reactance 1

Xl 8,7 Stator leakage reactance
Xr 20,9 Rotor leakage reactance
Kc 0,62 Short-circuit ratio 1

Time constants (s)

Direct axis Quadrature axis
Open circuit transient time constant T'do 3,26 T'qo NA 1
Short-circuit transient time constant T'd 0,503 T'q NA 1
Open circuit subtransient time constant T''do 0,041 T''qo 0,097 1
Subtransient time constant T"d 0,026 T"q 0,023 1

Ta 0,089 Armature time constant 1

Resistances (%)
Ra 0,7 Armature resistance R0 3,6 Zero sequence resistance 1
X/R 16,3 X/R ratio (without unit) R2 3,9 Negative sequence resistance

Voltage accuracy: 0,25%

Maximum inrush current for a voltage dip of 15%: 2697 kVA
when starting an AC motor having a starting power factor between 0 and 0.4

Rating is provided for the specified temperature rise, by resistance measurement according to IEC60034-1
According to: I.E.C. 60034.1 - 60034.2 - NEMA MG 1-32
Products and materials shown in this catalogue may, at any time, be modified in order to follow the latest technological developments,

test1 rev. 1 Page 4 / 8

 1

ALTERNATOR MAIN CURVES

LSA 56 XXXX
LS Reference: test1

Date: 11-18-2021 3750kVA - 6600V - 50 Hz V6.08 - 08/2021

Umax + 5% 6 930 V
Capability Curve Un 6 600 V
Umin - 5% 6 270 V

PF -0,8 PF -0,9 PF -0.95 kWe // rated

kWe ratedkVA
kVA PF 0.95 PF 0,9 PF 0,8
1 0.8
PF -0,7 PF 0,7

0,8
PF -0,6 PF 0,6

0,6
PF -0,5 PF 0,5

PF -0,4 0,4
PF 0,4

PF -0,3 PF 0,3

PF -0,2 0,2 PF 0,2

PF -0,1 PF 0,1

0
-1,0 -0,8 -0,6 -0,4 -0,2 0,0 0,2 0,4 0,6 0,8 1,0
kVAr // rated
kVAr ratedkVA
kVA

Efficiency Curves According to: IEC

PF 1 PF 0,8
98,0
97,39 97,45
97,06
97,0
Efficiency - Rendement en %

96,19
96,65 96,66
96,0 96,47

95,74
95,0

94,0

93,20
93,0
92,89

92,0
25 50 75 100 125
Load (% of rated kWe) - Charge (% kWe nominaux)

test1 rev. 1 Page 5 / 8

 1

ALTERNATOR MAIN CURVES

LSA 56 XXXX
LS Reference: test1

Date: 11-18-2021 3750kVA - 6600V - 50 Hz V6.08 - 08/2021

Stator Current decrement curves

Symmetrical phase to neutral short-circuit initial 2 314 A 7,1 x In
Symmetrical two phase short-circuit max 1 798 A 5,5 x In In = 328 A
Symmetrical three phase short-circuit value 2 188 A 6,7 x In
Thermal Limit

Isc ( Short circuit current per rated current - Courant de court circuit / In )
Symmetrical Phase to neutral short circuit
12 Symmetrical two phase short circuit
Symmetrical three phase short circuit
Thermal limit curve
10
court circuit aux bornes de l'alternateur
short circuit at generator terminals -

0
0,001 0,01 0,1 1 10 100
Time - Temps (second.)

Asymmetrical three phase short-circuit IP 4 625 A 14,1 x In

Isc ( Short circuit current per rated current - Courant de court circuit / In )
Symmetrical three phase short circuit (rms)
16
Asymmetrical three phase short circuit (peak)

14 Thermal limit curve

short circuit at generator terminals -

12
court circuit aux bornes

10

0
0,001 0,01 0,1 1 10 100
Time - Temps (second.)

test1 rev. 1 Page 6 / 8

 1

ALTERNATOR MAIN CURVES

LSA 56 XXXX
LS Reference: test1

Date: 11-18-2021 3750kVA - 6600V - 50 Hz V6.08 - 08/2021

Transient Voltage Variation

Transient voltage dip curve versus load impact

Load inrush - Appel de charge - per kVA
0 1 000 2 000 3 000 4 000 5 000 6 000 7 000 8 000 9 000 10 000
0%
Voltage dip - Chute de Tension (% of rated voltage)

5%
10%
15%
20%
25%
30%
35%
40%

PF = 0,8 PF = 0.6 PF = 0.3 PF = 0 100%

Transient voltage rise curve versus load rejection

kVA shedding at P.F. Delestage de charge - per rated kVA
45%
40%
Voltage rise - Surtension (% of rated voltage)

35%
30%
25%
20%
15%
10%
5%
0%

0 1 000 2 000 3 000 4 000 5 000 6 000 7 000 8 000 9 000 10 000
PF = 0,8 100%

test1 rev. 1 Page 7 / 8

 1

ALTERNATOR MAIN CURVES

LSA 56 XXXX
LS Reference: test1

Date: 11-18-2021 3750kVA - 6600V - 50 Hz V6.08 - 08/2021

Thermal Damage Curve

Stator current
(per rated current)
6

5,5

4,5

3,5

2,5

1,5
1
1 10 100 1000 10000
Maximum duration - durée maximum (second.)

Unbalance Load Curve Stator Earth Fault Current

Negative phase sequence Current Fault Current - Courant de défaut (A)

courant inverse (per rated current)
75
3 C : Extensive damage
B : Considerable damage
A : Acceptable damage

2 50 C

B
1 25

A
0 0
1 10 100 1000 10000 0 1 2 3 4 5 6 7 8 9 10 11 12
Maximum duration of fault - Maximum duration of fault -
Durée max. du defaut (second.) Durée max. du defaut (second.)

test1 rev. 1 Page 8 / 8