Product data sheet 1/2

RIVKLE® Standard blind rivet nuts

Steel zinc-plated | Flat head | Plain | Cylindrical | Closed

Note: Thread according to ISO 6h (ISO 68-1) - Corrosion resistance 400 h salt spray |
Cr(VI)-free

Technical information can be found on the last page.

Diameter Article number Drilling diameter d E L2 e Length (l)

(d) nominal size B nominal size min. max. nominal size S
M3 23321030030 5 7.5 1 9.2 1.5 3.0 14.30 S = 4.1 - e
23321040020 10.4 1.0 2.0 15.25 S = 5.2 - e
M4 23321040040 6 9.0 1 10.4 2.0 4.0 16.75 S = 5.6 - e
23321040060 10.3 4.0 6.0 18.80 S = 7.6 - e
23321050030 14.0 0.5 3.0 19.70 S = 5.0 - e
M5 23321050055 7 10.0 1 14.0 3.0 5.5 22.70 S = 7.5 - e
23321050080 15.1 5.5 8.0 25.70 S = 9.6 - e
23321060030 16.3 0.5 3.0 22.70 S = 4.9 - e
M6 23321060055 9 13.0 1.5 17.0 3.0 5.5 25.70 S = 7.7 - e
23321060080 17.0 5.5 8.0 28.70 S = 10.2 - e
23321080030 19.0 0.5 3.0 25.70 S = 5.7 - e
23321080055 19.0 3.0 5.5 28.70 S = 8.2 - e
M8 11 16.0 1.5
23321080080 19.0 5.5 8.0 31.70 S = 10.7 - e
23321080105 20.4 8.0 10.5 34.80 S = 12.9 - e
23321100035 25.0 1.0 3.5 32.70 S = 6.5 - e
M 10 23321100060 13 19.0 2 25.4 3.5 6.0 35.80 S = 8.4 - e
23321100085 25.6 6.0 8.5 38.80 S = 11.2 - e
23321120040 29.6 1.0 4.0 38.80 S = 7.2 - e
M 12 16 23.0 2
23321120070 29.4 4.0 7.0 41.80 S = 10.4 - e
All technical data refer to the measure mm

Böllhoff Group · Archimedesstr. 1-4 · 33649 Bielefeld · Phone: +49 521 4482-1387 · [email protected] · eshop.boellhoff.de/en/home
This document was generated automatically. Subject to technical changes and errors. Distribution as well as duplication of this document, its utilisation and
communication of its content only permitted with express consert.
nformation Product data sheet 2/2

>
<>

<
< >
d L B
(mm) (mm) (mm)

Head diameter
Overall length
Thread size
> <

Ø H
e (min - max)
(mm) (mm) (mm)

Grip range Hole geometry

Defines the range of total thickness of the customers If round –> diameter
part (even if it consists of more than one layer) If hexagonal –> wigth across flats

< S << L2 < < E max <

(mm) (mm) (mm)

Head projection after setting

Variable according to the application (setting load, material substrate, etc.)

Blind side projection after installation

Defines the clearance needed on the blind side (cannot be used for quality
control)
Setting stroke
Difference of total length before and after installation

RIVKLE® Nut RIVKLE® Stud

All technical data refer to the measure mm

RIVKLE®
Mandrel*
Customers part
Anvil*
Counter nut
Setting tool

*in accordance to chosen RIVKLE®*

Böllhoff Group · Archimedesstr. 1-4 · 33649 Bielefeld · Phone: +49 521 4482-1387 · [email protected] · eshop.boellhoff.de/en/home
Böllhoff Group
This document was generated automatically. Subject to technical changes and errors. Distribution as well as duplication of this document, its utilisation and
nge. Reprinting, even in extract form, only permitted Please find your local contact on www.boellhoff.com
communication of its content only permitted with express consert.
bserve protective note according to ISO 16016. or contact us under [email protected]